Professional Documents
Culture Documents
Workshop 7 Mid-Plane Mesher: WS7-1 PAT302, Workshop 7, December 2004 2004 MSC - Software Corporation
Workshop 7 Mid-Plane Mesher: WS7-1 PAT302, Workshop 7, December 2004 2004 MSC - Software Corporation
Workshop 7 Mid-Plane Mesher: WS7-1 PAT302, Workshop 7, December 2004 2004 MSC - Software Corporation
MID-PLANE MESHER
WS7-1
WS7-2
MID-PLANE MESHER
Problem Description
Create a 2D mesh inside the sheet metal clip solid using Midplane
Mesh.
Create a 2D mesh using a midsurface extracted from the sheet
metal clip solid .
Compare the mesh obtained from the two methods.
WS7-3
MID-PLANE MESHER
WS7-4
MID-PLANE MESHER
WS7-5
MID-PLANE MESHER
WS7-6
MID-PLANE MESHER
Elements: Create/Mesh/Surface
Mesher: Paver
Surface List: select all surfaces in group mid_surface
GEL: 2.50
WS7-7
MID-PLANE MESHER
Meshed extracted
mid-surfaces
Midplane mesh
WS7-8
MID-PLANE MESHER
Elements: Verify/Quad/Skew
Midplane mesh
PAT302, Workshop 7, December 2004
Copyright2004 MSC.Software Corporation
Meshed extracted
mid-surfaces
WS7-9
WS7-10