Errata: Pore Pressures and Strains After Repeated Loading of Saturated Clay

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

ERRATA

Errata: Pore Pressures and Strains after Repeated Loading


of Saturated Clay
NYALE. WILSONA N D JOHNR. GREENWOOD
(Ref.: Can. Geotech. J. 11(2), pp. 269-277, 1974)

Department of Chtil Engineering, McMaster University, Hamilton, Ontclrio L8S 4L7


Received July 20, 1975
Accepted July 24, 1975

Caption to Fig. 5 should read:


FIG. 5 . Recoverable strain and pore pressure versus repeated stress.
This figure applied to the section of text
headed 'Elastic Rebound'.

The pore pressure and strain curves, referred to erroneously as Fig. 5 in the text (p.
274), were omitted from the paper. This figure
(Fig. 4a) is shown below.

Symbol
A

Repeated Load
0.160's
0 . 3 us
0 -376.
0.5266

A
L--

0.59~5
0.800.
Cont~nuousloading

l s o t r o p ~ cconsolidat~onto 5 0 p 5 I
Points Plotted f o r 'Load On"
Condltlon Only

"I
I
I
I

FIG. 4a.

Can. Geotech. J., 12,547 (1975)

0.2

0.L
Axlal Stram E

(%I

I
0.6

0.8

Pore pressure (load on) L1erslts axial strain for repeated load tests.

You might also like