Three external clamps were used while camping, which caused a problem in the "C-fram". Clamping lugs in the center slot caused bending due to less lug thickness and clamping pressure. Clamping in slot 2 compressed slot 1 easily, applying potential force between the lug and component and bending the lug. Reducing web thickness from 5.4 to 1.6 also caused bending of the ribs and lugs due to less lug thickness.
Three external clamps were used while camping, which caused a problem in the "C-fram". Clamping lugs in the center slot caused bending due to less lug thickness and clamping pressure. Clamping in slot 2 compressed slot 1 easily, applying potential force between the lug and component and bending the lug. Reducing web thickness from 5.4 to 1.6 also caused bending of the ribs and lugs due to less lug thickness.
Three external clamps were used while camping, which caused a problem in the "C-fram". Clamping lugs in the center slot caused bending due to less lug thickness and clamping pressure. Clamping in slot 2 compressed slot 1 easily, applying potential force between the lug and component and bending the lug. Reducing web thickness from 5.4 to 1.6 also caused bending of the ribs and lugs due to less lug thickness.
Three external clamps were used while camping, which caused a problem in the "C-fram". Clamping lugs in the center slot caused bending due to less lug thickness and clamping pressure. Clamping in slot 2 compressed slot 1 easily, applying potential force between the lug and component and bending the lug. Reducing web thickness from 5.4 to 1.6 also caused bending of the ribs and lugs due to less lug thickness.
lugs by using external clamps If we clamped lug in center slot, lug will be bend due to less lug thickness & clamping pressure Lug dont bend while clamping, & running the rib (profile) (more web thickness resist the bending the lug) If we clamped the lug by using slot 2, slot-1 easily compressed. so automatically potential force acting in between lug & component It bend while running the web thickness, if web thickness is reduced (5.4 to 1.6) gradually Rib & lug both are bend due to less lug thickness, if bend the lugs automatically web come up word so web thickness was reduced while machining.