Professional Documents
Culture Documents
Ang Kakapusan
Ang Kakapusan
ay tumutukoy sa pagkakaroon ng limitasyon sa mga pinagkukunang-yaman na ginagamit sa paglikha ng mga produkto. Itoay
isang kalagayan na kaakibat ng buhay ng tao na naglalarawan ng pagtutunggalian sa paggamit ng yaman ng bansa upang matugunan
ang mga pangangailangan. Dahilan ito ng paghahanap ng ibat ibang paraan upang matamo ang lubos na kapakinabangan sa paggamit
ng mga yaman ng bansa.
Ang kakulangan
ay isang kalagayan na panandalian lamang. Sinasabi na ang kalagayang ito ay maaaring gawa o likha ng tao. Ito ang
nagaganap kung may pansamantalang pagkukulang ng supply ng isang produkto. Ang pagkakaroon ng artipisyal na kakulangan ay
madalas na nangyayari sa isang ekonomiya.
Kaibahan ng kakapusan at kakulangan
Ang kakapusan ay tumutukoy sa limitasyon o hangganan ng isang produkto na nililikha o lilikhain pa lamang.isa itong
permanenteng kaganapan o kawalan ng pangangailangan.
Samantalang ang kakulangan ay ang pansamantalang kaganapan o kawalan ng pangangailangan.Ito ay nagnyayari lamang kapag may
Hoarding o pagtatago ng suplay ng produkto na madalas ginagawa ng mga rice kartel.Ang kartel ay isang gropo o samahan na
komokontrol at nagmamanipula ng pagbili pagpresyo at paglabas ng produkto
Palatandaaan ng kakapusan at kakulangan
-
Kapag mataas ang presyo ng mga produkto at iba pang pangunahing pangangailangan.
Kapag walang mabili bagamat may pera.
Kapag marami ang nagkakasakit sanhi ng gutom.
Kapag pilit na umaangkat ang pamahalaan kahit na naghihirap ito.
Anak ni Zeus at Hera. Bilang diyos ng digmaan, agad-agad siyang napupukaw papunta sa pook ng nagaganap na mga
pagkikipagdigma. Kabilang sa katangian niya ang pagiging kaaya-aya at malakas na lalaki, subalit lagi siyang handang pumaslang.
Kinatatakutan ng lahat ng mga Griyego ang galit ni Ares.
ATHENA Diyosa ng karunungan, digmaan, sining, industriya, hustisya at ng kaalaman.
Siya ang paboritong anak ni Zeus, anak ni Metis: ang unang asawa ni Zeus. Nagmula siya sa ulo ng kanyang amang si Zeus. Noong
ipinanganak, balot na ang kanyang buong katawan ng mga baluting pandigma.
ARTEMIS Diyosa ng buwan at pangangaso
Si Artemis ay kakambal na babae ni Apollo. Mayroon siyang hawak na balingkinitang pana na binabalahan ng ginintuang mga palaso.
Dahil nga diyosa siya ng paninila, mabilis ngunit may kayumian siya sa pagkilos. Mahal niya ang mga kagubatan. Paborito niya ang
usa.
DEMETER Diyosa ng agrikultura at pertilidad
Siya ang diyosa ng mga butil o buto ng halaman o pananim, kaya't siya rin ang diyosa ng agrikultura. Batay sa mitolohiya ng mga
Griyego, siya ang nagturo sa mga tao kung paano magtanim at magsaka. Sinasamba siya ng lahat ng mga uri ng taong nagtatanim at
umaani.
HESTIA Diyosa ng apuyan at tahanan
Si Hestia ang diyosa ng dapugan o apuyan at ng tahanan. Siya ang namamahala sa maamong buhay. Siya ang nakakatandang kapatid
na bebe ni Zeus at ang pinakamantandang anak nina Rhea at Cronus.
DIONISIO Diyos ng alak at diyos ng mga baging.
Si Dionisio ang huling diyos na pumasok at nanirahan sa Bundok ng Olimpo. Bilang diyos ng alak, nagagawa niyang maging
masiyahin ang tao sa pamamagitan ng pag-aalok at pagpapainom ng alak. Ngunit nagagawa niya ring mabangis ang tao dahil sa
pagkalasing.
APHRODITE Diyosa ng kagandahan at pag-ibig.
Kapag nakadama ng pag-ibig ang mga lalaki at babae ng mundo, sinasamba nila sa Aproditi. Mayroon siyang matamis na ngiti at
mahiligin sa paghalakhak. Mayroon siyang isang hindi magandang katangian nagiging pagtuya at kanyang halakhak, at mayroon din
siyang kakayahan at kapangyarihang lumipol o manira.
ACHILLES
Isang Griyegong bayani ng Digmaang Trohano, at pangunahing tauhang mandirigma sa Iliada ni Homero. Isa sa mga katangian ni
Achilles ang pagiging pinakakakabigha-bighaning sa mga lalaking bayaning tinipon laban s Troya, at siya ring pinakamagiting at
pinakamagaling.
1. Plate boundary zones occur where the effects of the interactions are unclear, and the boundaries, usually occurring
along a broad belt, are not well defined and may show various types of movements in different episodes.
2. Divergent boundaries (Constructive) occur where two plates slide apart from each other. At zones of ocean-toocean rifting, divergent boundaries form by seafloor spreading, allowing for the formation of new ocean basin. As
the continent splits, the ridge forms at the spreading center, the ocean basin expands, and finally, the plate area
increases causing many small volcanoes and/or shallow earthquakes. At zones of continent-to-continent rifting,
divergent boundaries may cause new ocean basin to form as the continent splits, spreads, the central rift
collapses, and ocean fills the basin. Active zones of Mid-ocean ridges (e.g., Mid-Atlantic Ridge and East Pacific
Rise), and continent-to-continent rifting (such as Africa's East African Rift and Valley, Red Sea) are examples of
divergent boundaries.
3. Convergent boundaries (Destructive) (or active margins) occur where two plates slide toward each other to form
either a subduction zone (one plate moving underneath the other) or a continental collision. At zones of ocean-tocontinent subduction (e.g., Western South America, and Cascade Mountains in Western United States), the dense
oceanic lithosphere plunges beneath the less dense continent. Earthquakes then trace the path of the downwardmoving plate as it descends into asthenosphere, a trench forms, and as the subducted plate partially melts,
magma rises to form continental volcanoes. At zones of ocean-to-ocean subduction (e.g., the Andes mountain
range in South America, Aleutian islands, Mariana islands, and the Japanese island arc), older, cooler, denser
crust slips beneath less dense crust. This causes earthquakes and a deep trench to form in an arc shape. The
upper mantle of the subducted plate then heats and magma rises to form curving chains of volcanic islands. Deep
marine trenches are typically associated with subduction zones, and the basins that develop along the active
boundary are often called "foreland basins". The subducting slab contains many hydrous minerals which release
their water on heating. This water then causes the mantle to melt, producing volcanism. Closure of ocean basins
can occur at continent-to-continent boundaries (e.g., Himalayas and Alps): collision between masses of granitic
continental lithosphere; neither mass is subducted; plate edges are compressed, folded, uplifted.
4. Transform boundaries (Conservative) occur where two lithospheric plates slide, or perhaps more accurately, grind
past each other along transform faults, where plates are neither created nor destroyed. The relative motion of the
two plates is either sinistral (left side toward the observer) or dextral (right side toward the observer). Transform
faults occur across a spreading center. Strong earthquakes can occur along a fault. The San Andreas Fault in
California is an example of a transform boundary exhibiting dextral motion
5. Trench is a type of excavation or depression in the ground that is generally deeper than it is wide (as opposed to a
wider gully or ditch), and narrow compared to its length (as opposed to a simple hole). In geology, trenches are
created as a result of erosion by rivers or by geological movement of tectonic plates. In the civil engineering field of
construction or maintenance of infrastructure, trenches are created to install underground infrastructure
or utilities (such as gas mains, water mains or telephone lines), or later to search for these installations. Trenches
have often been dug for military defensive purposes. In archaeology, the "trench method" is used for searching and
excavating ancient ruins or to dig into strata of sedi mented material.
Oceanic crust is the part of Earth's lithosphere that surfaces in the ocean basins. Oceanic crust is primarily
composed of mafic rocks, orsima, which is rich in iron and magnesium. It is thinner than continental crust, or sial,
generally less than 10 kilometers thick; however it is denser, having a mean density of about 2.9 grams per cubic
centimeter[1] as opposed to continental crust which has a density of about 2.7 grams per cubic centimeter.
7. The continental crust is the layer of igneous, sedimentary, and metamorphic rocks which forms the continents and the areas
of shallow seabed close to their shores, known as continental shelves.
6.