Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

HERCULES Critical Service Stuffing Boxes | PCSBTM

Pollution Control Stuffing Box (PCSB)


An enhanced version of Hercules DPSB using PCSB Adapter
Unit below the BOP section & LUGTM is replaced with PCSB
Upper Gland (a.k.a. Hercules HPLUGTM)
If polished rod breaks below stuffing box, flapper closes
automatically
Two independently adjustable packing chambers primary
Cone Packing in DPSB Body & V-Ring Packing in PCSB Upper
Gland.The V-Rings contain full working pressure, unlike the
single Wiper Cone used in a LUGTM
Pollution Control Adapter acceptable to -50 F
Pollution Control Adapter meets NACE MR0175
Base has 1/2" NPT test port
Adaptable to Anti-Pollution Adapter Control Device or
Hercules SBTM Leak Detector
Primary cone packing can be changed under pressure
Unique misaligning feature reduces need for exact alignment
with the pumping unit
Flanged bottom connection available

SPECIFICATIONS

Available with welded bottom flange connections

PCSB

Working Pressure

1500 PSI

Bottom Thread
(API Tubing or LP)

2", 2-1/2", 3"

Bottom Connection

Male or Flanged

Available with 1500 or 2500 PSI Big StuffTM DPSBTM Top Section
(& with or without HPLUGTM)
Primary Split Cone Packing
or optional DOME Packing

Weight

PCSB Packing Gland Cap

Hex Bolts w/Lock Washers


2"
2-1/2"
3"

Height

102 lbs.
107 lbs.
112 lbs.

DPSB Compression
Bolt

24-1/2"
Low Temperature Steel
Stainless Steel
Ductile Iron*

Split Cone Packing


Rod Sizes

1", 1-1/8", 1-1/4", 1-5/16",


1-3/8", 1-7/16", 1-1/2", 1-3/4"

V-Ring Packing O.D.


V-Ring Stack Height

PCSB V-Ring
Packing (split)

Std. DPSB Body

Material
Base & Adapter Spool
Flapper
Body & Packing Glands

Pieces Required:
Top Cones
Bottom Cones

Packing
Support (split)

5
1

DPSB Compression
Ring

Packing
Support (split)

Split Cone
Packing

PCSB Upper Gland


Body (HPLUG Body)

Pollution Control
Adapter Spool

Upper Gland
Bolts for DPSB

Flapper
Wear Pad

2-1/2"
3"

3/4" NPT Port

Flapper Valve

Lower Gland
for DPSB

PCSB Base

Lower Gland
Bolts for DPSB

* Corrosion-resistant coatings available, contact customer service.


Hex Bolts w/Lock Washers

NOTE: V-RING PACKING FOR PCSB IS NOT


INTERCHANGEABLE WITH HTD V-RING PACKING.

Note: O-Rings for PCSB


Spool are not shown
(1 top & 2 bottom)

Available with DOME primary packing. (see pages 13-14)

8
HERCULES General Products

You might also like