Q2. What is meant by thermal runaway. Q3. Explain the need for biasing. Q4. Where should be the Q-point be located to get maximum undistorted output ? Q5.Draw the voltage divider bias circuit and derive the expression for Q-point.
Q6. Calculate the dc voltages and currents for the circuit
shown. Assume VBE =0.3v and = 60 for the transistor used.
Q7. Draw the dc load line and find the operating
points of a voltage divider circuit if R1 = 39 k ohm, R2 = 3.9k ohm, RE = 1.5K ohm, RC = 10k ohm, V =21 V. CC