HK Vgu: VGU Tester and Charging Unit

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

HK VGU

VGU tester and charging unit


Properties
Included in scope of supply

Tester and charging unit with 2 pressure


gauges (0-25 bar / 0-250 bar) and connection
M28x1.5
Protective case
Connection adapter 7/8" short (>400bar)
Connection adapter 7/8" long
Connection adapter 5/8"
Connection adapter 8V1
High-pressure hose 2.5 m long
Allen key size 6
Replacement seals
Operating manual

Note
Caution! Use only technical nitrogen for charging, never oxygen or air!
Risk of explosions!

Description
The precharge pressure of hydraulic accumulators can be checked, reduced and increased. Fits on all bladder accumulators
IHV bladder accumulators, OLM diaphragm accumulators and all commercially available accumulators with M28 x 1.5 charging connection.

Item
Identification

Note

Weight

HK VGU 250 7 TS3 3

Complete tester and charging unit

(kg)

2,50

Spare parts
HK VGU DICHTSATZ
HK VGU GAS VENT

Seal kit, VGU tester and charging unit


Gas valve kit for bladder accumulators

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.

19.06.2015

HANSA-FLEX AG

www.hansa-flex.com

You might also like