Professional Documents
Culture Documents
(ASTM B 187) : Copper Bus Bar, Rod, and Shapes
(ASTM B 187) : Copper Bus Bar, Rod, and Shapes
( ASTM B 187 )
Dayco Industries provides copper Bus Bar, Rod and Custom Shapes to O.E.M.
manufacturers in the Western United States. Made to ASTM B 187 and dependant on
application, we can provide several copper alloys to meet your requirements.
Ordering Information
Quantity
Copper UNS No.
UNS No.
Former
C10100
OFE
C10200
OF
C10300
C11000
ETP
C12000
DLP
UNS Numbers below will require an amount of silver in ounces per ton when made the alloy of record.
UNS No.
Former
C10400
C10500
OFS
C10700
C11300
C11400
STP
C11600
Temper
Materials shall be finished by such cold-worked and annealing operations as are necessary to
produce the required temper, edge and surface finish. The standard temper designations are:
Standard
Former
H04
Hard1
O60
Soft Annealed
Edge Contours: Angles, Square Corners, Rounded Corners, Rounded Edges, Full Rounded Edges, Shapes.
If materials are being supplied for U.S. Governmental Agency, the following supplemental requirements
may be made a requirement at the time of quotation.
Federal Standards
- Fed. Std. No. 102, - Fed. Std. No. 123, Fed. Std. No. 185
Military Standards
MIL-STD -105, - MIL-STD-129
Military Specification
- MIL-C-3993
J.I.T (Just-In-Time) stocking program available.
Custom fabrication also available, once profile has been determined and produced, please inquire.
Dayco Industries, LLC 10215 San Sevaine Way Mira Loma, CA 91752
Call Toll Free: (800) 893-8355 Local: (951) 360-5900 Fax: (951) 360-5999
E-mail: sales@daycoindustries.com