Professional Documents
Culture Documents
Alarm Configuration in Ericsson System
Alarm Configuration in Ericsson System
Alarm Configuration in Ericsson System
IN ERICSSON SYSTEM
If we can not avoid FALLBACK during swap night we
have to configure the alarms according to previous
system (Ericsson system). At that time alarm
configuration may be needed.
During the FALLBACK we dont need to remake 37 pin
connector which is connected to Ericsson RBS. We
just need to punch the alarm cable in Krone Block.
The most important thing is that right alarm cable
must be punched in right slot of Krone Block.
Temperature high
Mains fail
Battery disconnected pre alarm
Rectifier module fail
Aviation light failure
Generator running
Fuel level low
Water level high
Door open
07/27/15
GRAMEENPHONE LTD.
07/27/15
Temperature high
Mains fail
Battery
Rectifier module
Aviation light failure
Generator running
Fuel level low
Water level high
Door open
N/A
N/A
N/A
N/A
GRAMEENPHONE LTD.
Temperature high
Mains fail
Battery
Rectifier module
Aviation light failure
Generator running
Fuel level low
Water level high
Door open
N/A
N/A
N/A
N/A
07/27/15
GRAMEENPHONE LTD.
07/27/15
GRAMEENPHONE LTD.