Professional Documents
Culture Documents
Control System (Ic6501) : Batch-2013-2017 (Problems From Unit 1)
Control System (Ic6501) : Batch-2013-2017 (Problems From Unit 1)
BATCH-2013-2017
(PROBLEMS FROM UNIT 1)
Ref: i) Modern Control Engg-Ogata (5/e) ii) Introduction to control systems- Arun.K.Ghosh
Assignment-1 D.O.A-15/07/15
D.O.S. 20/07/15
1.a) Obtain the electrical analogous circuits for the mechanical system shown in Fig below.
Also find the transfer function X2(S) / F(S)
1.b) Obtain the electrical analogous circuits for the mechanical system shown in Fig below.
Also find the transfer function Y(S) / F(S)
1.c) Obtain the electrical analogous circuits for the mechanical system shown in Fig below.
Also find the transfer function X0(S) /Xi(S)
Compiled by Prof.S.Nagammai,HOD/EIE
Page 1
1.e) Obtain the electrical analogous circuits for the mechanical system shown in Fig below.
Also find the transfer function X0(S) /T(S)
1.f.) Obtain the electrical analogous circuits for the mechanical system shown in Fig below.
Also find the transfer function X2(S) /F(S)
Compiled by Prof.S.Nagammai,HOD/EIE
Page 2
2.e.Draw the block diagram of the electrical network shown in Fig below and hence find the
transfer function of the network.
Compiled by Prof.S.Nagammai,HOD/EIE
Page 3
C(S )
using Masons gain formula.
R(S )
3.c. Draw the signal flow graph and hence find the transfer function C/R
Compiled by Prof.S.Nagammai,HOD/EIE
Page 4