Download as pdf or txt
Download as pdf or txt
You are on page 1of 46

2015 in

2014

10

11

12

13

14

15

16

17

18

1995

19

20

21

22

23

24

An op-amp has an open-loop gain of 10 5 and an open-loop upper cutoff frequency of 10 Hz. If this opamp is connected as an amplifier with a closed-loop gain of 100, then the new upper cutoff frequency is
(a)

25

10 Hz (b) 100 Hz (c) 10 kHz (d) 100 kHz

An op-amp, having a slew rate of 62.8 V/sec, is connected in a voltage follower configuration. If the
maximum amplitude of the input sinusoid is 10V, then the minimum frequency at which the slew rate
limited distortion would set in at the output is
a.1.0 MHz (b) 6.28 MHz (c) 10.0 MHz (d) 62.8 MHz

26

The minimum number of comparators required to build an 8 it flash ADC is


a)

27

8 (b) 63 (c) 255 (d) 256

An ideal op-amp is an ideal


(a) voltage controlled current source (b) voltage controlled voltage source (c) current controlled current
source (d) current controlled voltage source

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

You might also like