Professional Documents
Culture Documents
All Cores
All Cores
Contents
Introduction
Quality
Environmental aspects of soft ferrites
Ordering information
Applications
Literature and reference publications
Ferrite materials survey and specifications
- Ferrite materials survey
- Material specifications and graphs
Specialty ferrites
- Ferrites for particle accelerators (T)
- Ferrite building blocks (BLK)
- Machined ferrites and special shapes
- Ferrites for anechoic chambers (PLT, PLT/H)
Page
4
14
15
16
17
54
58
59
62
176
178
183
184
186
188
308
320
378
396
430
464
480
500
512
538
566
582
596
676
702
710
716
750
846
870
874
877
880
882
885
887
894
895
896
898
901
914
925
926
931
938
947
948
952
960
1066
1098
DEFINITIONS
Preliminary
specification
Development
This data sheet contains preliminary data. Ferroxcube reserves the right to
make changes at any time without notice in order to improve design and
supply the best possible product.
Product specification
Production
This data sheet contains final specifications. Ferroxcube reserves the right
to make changes at any time without notice in order to improve design and
supply the best possible product.
DISCLAIMER
Life support applications These products are not designed for use in life support appliances, devices, or systems
where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using
or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for
any damages resulting from such application.
PRODUCT STATUS DEFINITIONS
STATUS
INDICATION
DEFINITION
Prototype
These are products that have been made as development samples for the purposes of
technical evaluation only. The data for these types is provisional and is subject to change.
Design-in
Preferred
These products are recommended for use in current designs and are available via our
sales channels.
Support
These products are not recommended for new designs and may not be available through
all of our sales channels. Customers are advised to check for availability.
Ferroxcube
Soft Ferrites
Introduction
PRE-SINTERING
Composition
FORMING
Most ferrite parts are formed by pressing. The granules are
poured into a suitable die and then compressed. The
organic binder acts in a similar way to an adhesive and a
so-called green product is formed. It is still very fragile
and requires sintering to obtain the final ferrite properties.
SINTERING
The green cores are loaded on refractory plates and
sintered at a temperature between 1 150 C and 1300 C
depending on the ferrite grade. A linear shrinkage of up to
20% (50% in volume) takes place. The sintering may take
place in tunnel kilns having a fixed temperature and
atmosphere distribution or in box kilns where temperature
and atmosphere are computer controlled as a function of
time. The latter type is more suitable for high grade ferrites
which require a very stringent control in conditions.
Manufacturing process
The following description of the production process is
typical for the manufacture of our range of soft ferrites,
which is marketed under the trade name Ferroxcube.
R AW MATERIALS
The raw materials used are oxides or carbonates of the
constituent metals. The final material grade determines
the necessary purity of the raw materials used, which, as
a result is reflected in the overall cost.
PROPORTIONS OF
FINISHING
After sintering, the ferrite core has the required magnetic
properties. It can easily be magnetized by an external field
(see Fig.2), exhibiting the well-known hysteresis effect
(see Fig.1). Dimensions are typically within 2% of nominal
due to 10- 20% shrinkage. If this tolerance is too large or if
some surfaces require a smooth finish (e.g. mating faces
between core halves) a grinding operation is necessary.
Usually diamond-coated wheels are used. For high
permeability materials, very smooth, lapped, mating
surfaces are required. If an air-gap is required in the
application, it may be provided by centre pole grinding.
THE COMPOSITION
2013 Jul 31
Ferroxcube
Soft Ferrites
Introduction
Magnetism in ferrites
A sintered ferrite consists of small crystals, typically
10 to 20 m in dimension. Domains exist within these
crystals (Weiss domains) in which the molecular magnets
are already aligned (ferrimagnetism). When a driving
magnetic field (H) is applied to the material the domains
progressively align with it, as shown in Fig.2.
handbook, halfpage
MBW424
H
H
(B)
(A)
H
(D)
(C)
MBW423
2013 Jul 31
Ferroxcube
Soft Ferrites
Introduction
DESCRIPTION
UNIT
Ae
mm2
Amin
mm2
AL
inductance factor
nH
Br
remanence
Bs
B
T
F
capacitance
DF
disaccomodation factor
frequency
Hz
m
gap length
A/m
Hc
coercivity
A/m
A/m
current
voltage
Ie
mm
inductance
number of turns
Pv
kW/m3
quality factor
Tc
Curie temperature
THD/a
dB
Ve
mm3
K1
tan/i
loss factor
T1
absolute permeability
Hm1
amplitude permeability
effective permeability
initial permeability
relative permeability
rev
reversible permeability
incremental permeability
resistivity
(l/A)
mm1
2013 Jul 31
Ferroxcube
Soft Ferrites
Introduction
Definition of terms
AMPLITUDE PERMEABILITY
PERMEABILITY
When a magnetic field is applied to a soft magnetic
material, the resulting flux density is composed of that of
free space plus the contribution of the aligned domains.
(1)
B = 0 H + J or B = 0 ( H + M )
INCREMENTAL PERMEABILITY
B
M
---- = 0 1 + ----- = absolute
H
H
(2)
(3)
C OMPLEX PERMEABILITY
A coil consisting of windings on a soft magnetic core will
never be an ideal inductance with a phase angle of 90.
There will always be losses of some kind, causing a phase
shift, which can be represented by a series or parallel
resistance as shown in Figs 3 and 4.
INITIAL PERMEABILITY
The initial permeability is measured in a closed magnetic
circuit (ring core) using a very low field strength.
1
B
i = ------ -------0 H
( H 0 )
(4)
handbook, halfpage
Ls
Rs
EFFECTIVE PERMEABILITY
If the air-gap is introduced in a closed magnetic circuit,
magnetic polarization becomes more difficult. As a result,
the flux density for a given magnetic field strength is lower.
MBW401
(5)
andbook, halfpage
Rp
2013 Jul 31
Lp
MBW402
Ferroxcube
Soft Ferrites
Introduction
(8)
handbook, halfpage
B = 3.0mT
tanm
1
Z = --------------------------------------------1 ( j L p ) + 1 R p
B = 1.5mT
(9)
B=0
tanh
tanF
(11)
tanr
frequency
MBW425
Fig.5
(12)
LOSS FACTOR
( tan m ) gapped
tan m
-------------------------------------- = --------------i
e
Hysteresis losses
2.
3.
Residual losses.
(15)
(13)
(16)
(17)
(14)
1
L
reac tan ce
Q = ------------ = ---------- = ---------------------------------------tan
R tot
total resistance
(18)
2013 Jul 31
Ferroxcube
Soft Ferrites
Introduction
IN 2
= ------------H
le
(19)
--------------h- = B B
e
(20)
L = N AL
0e
A L = ---------------- (l A )
(23)
U
B = ----------------------4 f NAe
2013 Jul 31
(28)
(21)
U 2
U
= --------------- = -----------------------------B
A e N
2 f NA e
(27)
0 N
L = ---------------------1
l
------ ---e
A
(26)
(25)
Ferroxcube
Soft Ferrites
Introduction
So F is defined as:
( i ) T2 ( i ) T1
1
- ----------------- F = ----------------------------------2
T2 T1
( i ) T1
handbook, halfpage
Bs
Br
Hc
( i ) T 2 ( i ) T1
1
F = --------------------------------------- -----------------( i ) T1 ( i ) T2 T2 T1
+Hc
Bs
MBW426
THD
( i ) T2 ( i ) T1
1
TC = ------------------------------------ -----------------T2 T1
( i ) T 1
= e F
2013 Jul 31
(32)
Br
Fig.6
(31)
10
Ferroxcube
Soft Ferrites
Introduction
(33)
THD MEASUREMENTS
Measured THD values as well as accuracies depend on
the impedances in the measuring circuit used.
Ri R L
R = --------------------PR i + RL
RL
Lp
(35)
Ri
Vs
(34)
MFW069
MEASUREMENT PRECAUTIONS
In general it is advised to check measuring conditions and
the test circuit with impedances R and Lp in order to keep
the circuit correction factor as low as possible. This avoids
measuring in non-discriminating ranges (< 80 dB), which
may lead to inaccurate or useless results. It is
recommended to use low measuring frequencies,
preferably < 25 kHz, for several reasons. At high
frequencies it will often be difficult to reach the required
flux level in the core of the transformer or inductor because
of output voltage limitations. The real generated THD by
the ferrite core (THD C VF3/VF1) can be related to the
THD which is measured in the circuitry (THD M VM3 /VM1)
by knowing that VF1 = VM1 x (Np/Ns). By using equation
[36] this relation is as follows :
1
THD M = -------------------------------------------- THD C = CCF T HD C (37)
2
1 + ( 3 L p R )
Ideal
Lp
VM3
VF3
MFW070
2013 Jul 31
11
(38)
Ferroxcube
Soft Ferrites
Introduction
jL p || R Lp
= V s ------------------------------------------R i + ( jL p || R Lp )
(39)
or
1
V Lp = Vs --------------------------------------------------------------------------2
2
( 1 + R i R Lp ) + ( R i L p )
(40)
L1 L2
----------------- = e DF
L1
R ESISTIVITY
Ferrite is a semiconductor with a DC resistivity in the
crystallites of the order of 10-3 m for a MnZn type ferrite,
and about 30 m for a NiZn ferrite.
(41)
Table 1
Time stability
When a soft magnetic material is given a magnetic,
mechanical or thermal disturbance, the permeability rises
suddenly and then decreases slowly with time. For a
defined time interval, this disaccommodation can be
expressed as:
1 2
D = ----------------1
2013 Jul 31
TEMPERATURE
(C)
20
(42)
(45)
(44)
(43)
12
RESISTIVITY
(m)
10
20
50
100
Ferroxcube
Soft Ferrites
Table 2
Introduction
TEMPERATURE
(C)
Table 5
FREQUENCY
(MHz)
RESISTIVITY
(m)
PERMITTIVITY
(r)
5.107
0.1
2.105
20
107
105
60
106
10
100
105
100
Table 6
FREQUENCY
(MHz)
0.1
0.5
10
0.1
100
Table 4
RESISTIVITY
(m)
0.01
FREQUENCY
(MHz)
RESISTIVITY
(m)
0.1
105
5.104
10
104
100
103
Permittivity
The basic permittivity of all ferrites is of the order of 10.
This is valid for MnZn and NiZn materials. The isolating
material on the grain boundaries also has a permittivity of
approximately 10. However, if the bulk permittivity of a
ferrite is measured, very different values of apparent
permittivity result. This is caused by the conductivity inside
the crystallites. The complicated network of more or less
leaky capacitors also shows a strong frequency
dependence.
Tables 5 and 6 show the relationship between permittivity
and frequency for both MnZn and NiZn ferrites.
2013 Jul 31
13
104
FREQUENCY
(MHz)
5.104
PERMITTIVITY
(r)
0.001
100
0.01
50
25
10
15
100
12
Ferroxcube
Soft Ferrites
Quality
QUALITY
Quality standards
Different criteria can be agreed upon for customized
products. Also PPM agreements with customers are
encouraged.
FITNESS FOR
Production of process
Finished products.
All our production centres are complying with the ISO 9000
quality system.
Aspects of quality
When describing the quality of a product, three aspects
must be taken into account:
R ELIABILITY
Delivery quality
QUALITY
2013 Jul 31
USE
14
Ferroxcube
Soft Ferrites
Environmental aspects
2013 Jul 31
15
Ferroxcube
Soft Ferrites
Ordering information
The 12-digit code used on the packaging labels, provides
full logistic information as well.
ORDERING INFORMATION
The products in this handbook are identified by type
numbers. All physical and technical properties of the
product are expressed by these numbers. They are
therefore recommended for both ordering and use on
technical drawings and equipment parts lists.
Technical information:
type number
11-digit code number
delivery and/or production batch numbers
Logistic information:
12-digit code number
quantity
country of origin
production week
production centre.
Product status definitions
STATUS
INDICATION
DEFINITION
Prototype
These are products that have been made as development samples for the purposes of
technical evaluation only. The data for these types is provisional and is subject to change.
Design-in
Preferred
These products are recommended for use in current designs and are available via our
sales channels.
Support
These products are not recommended for new designs and may not be available through
all of our sales channels. Customers are advised to check for availability.
2013 Jul 31
16
Ferroxcube
Soft Ferrites
Applications
APPLICATIONS
Material requirements:
Introduction
Low losses
Defined temperature factor to compensate temperature
drift of capacitor
Telecommunications
Power conversion
INTERFERENCE SUPPRESSION
Interference suppression.
Material requirements:
andbook, halfpage
handbook, halfpage
U
U2
load
attenuation
(dB)
U1
U2
frequency
frequency
MBW404
MBW403
2013 Jul 31
17
Ferroxcube
Soft Ferrites
Applications
D ELAYING PULSES
STORAGE OF ENERGY
Material requirements:
Material requirements:
U1
handbook, halfpage
handbook, halfpage
U2
SMPS
U1
U2
load
delay
U
U1
U2
U2
time
time
MBW405
MBW406
2013 Jul 31
U1
18
Ferroxcube
Soft Ferrites
Applications
POWER TRANSFORMERS
Material requirements:
Material requirements:
High permeability
Low DC sensitivity.
Preferred materials: 3C81, 3H3, 3E1, 3E4, 3E25, 3E27,
3E28, 3E5, 3E6, 3E7, 3E8.
U1
U2
U1
load
U2
DC level
U1
U1
U2
time
time
MBW407
MBW408
2013 Jul 31
U2
handbook, halfpage
handbook, halfpage
19
Ferroxcube
Soft Ferrites
Applications
TUNING
LC filers are often used to tune circuits in audio, video and
measuring equipment. A very narrow bandwidth is often
not wanted.
Material requirements:
Moderate losses up to high frequency
Reasonable temperature stability.
Preferred materials: 3D3, 4A11, 4B1, 4C65, 4D2, 4E1.
olumns
bandwidth
frequency
CBW344
2013 Jul 31
20
Ferroxcube
Soft Ferrites
Applications
DC resistive losses
R0
1
1
------- = ------ -------- c ons tan t ( H )
L
e f Cu
Filter inductors
Pulse and matching transformers.
FILTER
COILS
2 2
C wCu VCu f d
R ec
--------- = ------------------------------------ ( H )
e
L
Dielectric losses
The capacitances associated with the coil are not loss free.
They have a loss factor which also increases the effective
coil resistance:
R
3
2
------d- = LC ---- + tan c ( H )
Q
L
Hysteresis losses
Q
VALUE
R
------h- = B B e ( H )
L
Re + r
------------- = e ( tan i ) ( H )
L
2013 Jul 31
21
Ferroxcube
Soft Ferrites
Applications
The following expression for third harmonic voltage U 3
may be used as a guide to the amount of distortion:
INDUCTOR DESIGN
The specification of an inductor usually includes:
U
------3- = 0.6 tan h
U1
The inductance
Minimum Q at the operating frequency
Applied voltage
Maximum size
Maximum and minimum temperature coefficient
DC
POLARIZATION
AL VALUE
Type of adjuster.
The AL factor is the inductance per turn squared (in nH) for
a given core:
SIGNAL LEVEL
L = N A L ( nH )
2013 Jul 31
22
Ferroxcube
Soft Ferrites
Applications
handbook, halfpage
Rw
Rs
C1
Lp
Rb
Rp
C2
N1
N2
Es
CBW346
Es = source voltage
Rs = source resistance
Rw = total winding resistance = R1 + R2, where R1 is
the primary winding resistance and R2 is the secondary
winding resistance referred to the primary
L = total leakage inductance = the primary inductance
with the secondary shorted
handbook, halfpage LF
insertion
loss
region
LF
droop
HF
region
region
HF
droop
mid-band
attenuation
frequency
MBW411
Ring cores are very suitable since they have no air gap
and make full use of the high permeability of the ferrite.
Fig.9
2013 Jul 31
mid-band
23
Transmission characteristic
of a wideband transformer.
Ferroxcube
Soft Ferrites
Applications
handbook, halfpage
td
pulse
amplitude
overshoot
leading
edge
top
of pulse
0.9
trailing
edge
droop
pulse
amplitude
P cores
0.1
tr
td
RM cores
tf
EP cores
MBW412
Ring cores
Small ER cores
Small E cores.
If the signal is superimposed on a DC current, core
saturation my become a problem. In that case the special
DC-bias material 3E28 or a lower permeability material
such as 3H3, 3C81 or 3C90 is recommended.
2013 Jul 31
24
Ferroxcube
Soft Ferrites
Applications
BUCK OR
DOWN CONVERTER
M
+
handbook, halfpage
DRIVE
CIRUIT
CONTROL
CIRCUIT
Vi
+
D
RECTIFIER
CONVERTER
Vo
current flow
mosfet conducting
mosfet cut-off
MFP076
2013 Jul 31
25
Ferroxcube
Soft Ferrites
BOOST OR
Applications
winding. The dots close to the primary and secondary
windings indicate the winding direction, necessary for
good operation.
UP CONVERTER
D
+
Vi
M
+
M
Vo
FORWARD CONVERTER
current flow
mosfet conducting
mosfet cut-off
MFP077
FLYBACK CONVERTER
One of the major drawbacks of both buck and boost
converter is the absence of galvanic isolation between inand output, which can be required by some applications.
Introducing a magnetically coupled coil, like in the flyback
converter of Fig.14, solves this point. But the big
advantage of the flyback converter is that the output
voltage can be higher or lower than the input voltage,
depending on the turns ratio N. More secondary windings
result in more output voltages. During the on-time of the
mosfet, a linearly rising current is flowing through the
primary winding and energy will be stored in the coupled
coil. By the end of the on-time the primary voltage reverses
and the stored energy introduces, via the magnetic
coupling, a linearly decreasing current in the secondary
2013 Jul 31
MFP078
current flow
mosfet conducting
mosfet cut-off
+
Vi
Vo
26
Ferroxcube
Soft Ferrites
Applications
Half and full bridge converters are normally the basis for
resonant converters. In these converters, the primary
inductance is a part of a resonant tank made with one or
more capacitors and/or inductors. Although the resonant
tank has a squarewave input voltage, sinusoidal voltages
and currents appear in the tank. This means that no
harmonics are introduced and in combination with the ZVS
of the mosfets, it makes resonant converters very
attractive for high frequency designs. Note that resonant
converters directly deliver their energy to the load and no
energy storage inductor is necessary.
D1
+
+
T
D2
Vi
Vo
D3
current flow
mosfet conducting
mosfet cut-off
MFP079
+
C1
M1
H ALF
Vi
T
M2
C2
MFP080
current flow
mosfet 1 conducting
mosfet 1 cut-off
mosfet 2 conducting
mosfet 2 cut-off
+
M3
M1
Vi
Vo
M4
M2
MFP082
current flow
mosfet 1 and 4 conducting
mosfet 1 and 4 cut-off
mosfet 2 and 3 conducting
mosfet 2 and 3 cut-off
2013 Jul 31
Vo
27
Ferroxcube
Soft Ferrites
Applications
FERRITE SELECTION
C ORE SELECTION
OPERATING FREQUENCY
The preferred operating frequency of a Switched Mode
Power Supply is greater than 20 kHz to avoid audible
noise from the transformer. With modern power ferrites
the practical upper limit has shifted to well over 1 MHz.
Ambient temperature
2013 Jul 31
28
Ferroxcube
Soft Ferrites
Applications
CORE TYPE
3C90
3C92
Low frequency (< 200 kHz) material with a very high
saturation level. Specially recommended for inductors and
output chokes.
POWER RANGE
(W)
<5
5 to 10
CORE TYPE
RM4; P11/7; T14; EF13; U10
3C94
RM5; P14/8
10 to 20
20 to 50
50 to 100
100 to 200
200 to 500
> 500
3C93
3F4
3C30
3F45
3C34
3F5
4F1
High frequency material (up to 10 MHz).
Specially recommended for resonant supplies.
3C81
Low frequency (< 100 kHz) material with loss minimum
around 60 C.
2013 Jul 31
29
Ferroxcube
Soft Ferrites
Applications
material for power inductors, especially at elevated
temperatures.
MBG004
handbook, halfpage
OUTPUT CHOKES
Iac
Iac
I0
80000
1/f
CBW475
Pv = 500 mW/cm3
100 C
4F1
3F5
f x Bmax
3F45
(Hz T)
60000
3F35
3C96
40000
3F3
3F4
3C94
3C90
20000
0
102
101
10
2013 Jul 31
30
IM
Ferroxcube
Soft Ferrites
GAPPED
Applications
The product I2L is a measure of the energy which is stored
in the core during one half cycle.
CORE SETS
Using this I2L value and the graphs given on the following
pages for most core types, the proper core and air gap can
be selected quickly at a glance.
10
MBW414
3C94
ungapped
i =2300
10
e=1500
e=1000
e=500
e=200
10 2
e=100
e=50
10
10
10 2
10 3
2013 Jul 31
31
H (A/m)
10 4
Ferroxcube
Soft Ferrites
Applications
CBW319
CBW320
handbook, halfpage
handbook, halfpage
I2L
(J)
I2L
(J)
E71/33/32
E65/32/27
101
E64/10/50
101
E55/28/25
E80/38/20
E46/23/30
E55/28/21
E56/24/19
E42/20
E47&50
E42/21/15
E58/11/38
E43/10/28
E38/8/25
E36/21/15
E41/17/12
E32/6/20
E30&31&32&34
102
102
E30/15/7
E22/6/16
E25/13/7
E18/4/10
E19/8/9
E25/6
E20/10/6
E20/10/5
E19/8/5
E13/6/6
E16/8/5
103
103
E14/3.5/5
E13/7/4
104
101
Fig.21
2013 Jul 31
I2L
air-gap (mm)
104
101
10
air-gap (mm)
10
32
Ferroxcube
Soft Ferrites
Applications
CBW321
handbook, halfpage
101
handbook, halfpage
I2L
(J)
I2L
(J)
101
102
CBW322
EFD30
EFD25
EC70
EC52
102
EFD20
103
EC41
EFD15
EC35
EFD12
EFD10
103
104
101
104
air-gap (mm)
105
101
10
2013 Jul 31
air-gap (mm)
33
10
Ferroxcube
Soft Ferrites
Applications
CBW323
101
handbook, halfpage
CBW324
1
handbook, halfpage
I2L
(J)
I2L
(J)
102
101
EP20
EP17
ER40
ER35
103
102
EP13
ER11
104
105
101
103
air-gap (mm)
104
101
10
2013 Jul 31
ER9.5
air-gap (mm)
34
10
Ferroxcube
Soft Ferrites
Applications
CBW325
handbook, halfpage
101
handbook, halfpage
I2L
(J)
I2L
(J)
101
102
CBW326
P66/56
P42/29
P36/22
P30/19
ETD59
P26/16
ETD54
ETD49
P22/13
ETD44
P18/11
ETD39
102
103
ETD34
ETD29
P14/8
P11/7
P9/5
104
103
P7/4
104
101
air-gap (mm)
105
101
10
2013 Jul 31
air-gap (mm)
35
10
Ferroxcube
Soft Ferrites
Applications
CBW327
101
handbook, halfpage
CBW328
101
handbook, halfpage
I2L
(J)
I2L
(J)
PT30/19
P26/16/I
102
102
PT26/16
P22/13/I
PT23/11
P18/11/I
PT18/11
P14/8/I
103
103
PT14/8
P11/7/I
104
104
105
101
air-gap (mm)
105
101
10
2013 Jul 31
air-gap (mm)
36
10
Ferroxcube
Soft Ferrites
Applications
CBW329
101
handbook, halfpage
CBW330
handbook, halfpage
I2L
(J)
I2L
(J)
PTS30/19
102
101
PTS26/16
PTS23/11
PQ35/35
PTS18/11
103
102
PTS14/8
PQ20/16 & 20/20
104
105
101
103
air-gap (mm)
104
101
10
2013 Jul 31
air-gap (mm)
37
10
Ferroxcube
Soft Ferrites
Applications
CBW331
101
handbook, halfpage
CBW332
101
handbook, halfpage
I2L
(J)
I2L
(J)
RM14/I
RM12/I
RM10
102
102
RM10/I
RM8
RM8/I
RM6S&R
RM7/I
RM5
RM6S/I
103
103
RM5/I
RM4
RM4/I
104
105
101
104
air-gap (mm)
105
101
10
2013 Jul 31
air-gap (mm)
38
10
Ferroxcube
Soft Ferrites
Applications
CBW333
101
handbook, halfpage
CBW334
handbook, halfpage
I2L
(J)
I2L
(J)
RM14/ILP
U93/30
U100/25
RM12/ILP
102
U93/76/16
101
RM10/ILP
U67/27/14
RM8/ILP
U30/25/16
RM7/ILP
U25/20/13
U33/22/9
RM6S/ILP
103
102
U20/16/7
RM5/ILP
U25/16/6
U15/11/6
RM4/ILP
103
104
105
101
air-gap (mm)
104
101
10
2013 Jul 31
U10/8/3
39
10
Ferroxcube
Soft Ferrites
Applications
MFP218
3000
I2L
(J)
2500
2000
1500
TN26/15/11
1000
TN23/14/7.5
500
TN20/10/6.4
TN10/6/4
100
TN13/7.5/5
TN17/11/6.4
AL value (nH)
300
2013 Jul 31
40
Ferroxcube
Soft Ferrites
IRON POWDER
Applications
To avoid the conduction of switching noise from a SMPS
into the mains, an input filter is generally necessary.
The magnetic circuit in these filters is usually a pair of
U cores or a ring core.
RING CORES
handbook, halfpage
-H
I
H
-I
MBW416
2013 Jul 31
41
Ferroxcube
Soft Ferrites
Applications
CBW579
10 4
3E25
i
3C11
3C90
10 3
3F3
3E5
4A11
10 2
4C65
10
101
10
f (MHz)
10 2
<500 kHz
INTERFERENCE
FILTER
no load current
3 MHz to 30 MHz
3S5 - 4A11
>30 MHz
4C65
CBW354
2013 Jul 31
42
Ferroxcube
Soft Ferrites
3R1 TOROIDS IN MAGNETIC
Applications
The performance of the material 3R1 is comparable to that
of amorphous metal making it an excellent choice for
application in magnetic regulators. However, since the
value of H c is higher for the ferrite than for most amorphous
metal compositions, a simple replacement will often fail to
deliver the expected results. A dedicated design or a slight
redesign of the regulating circuit is then required, for which
we will be glad to give you advice.
REGULATORS
Operating principles
When the main switch is ON (ton) the output current (I out )
flows through the winding of the saturable inductor to the
output inductor and from there to the load.
During OFF time this current falls to zero and so does the
magnetic field H. Because the saturable inductor has a
rectangular B-H loop, the flux remains at the high level Br
even when the driving field H has fallen to zero.
When no reset current is applied, the flux in the toroid
remains at the level of Br until the next ON time starts.
There is only a short delay (td) because the flux rises from
Br to Bs. After that, the current rises sharply to its maximum
value, limited only by the load impedance. The output
voltage has its maximum value, given by:
ton t d
V out = Vt ----------------T
Bs
Br
olumns
-Hc
Hc
BH loop excursion
during no blocking
-Br
-Bs
Bs
Br
-Hc
Hc
BH loop excursion
during partial blocking
-Br
-Bs
Bs
Br
-Hc
-Bs
Hc
BH loop excursion
during full blocking
-Br
CBW341
ton t d t b
V out = Vt ---------------------------T
In this way a reset current in the order of 100 mA can
regulate load currents in the order of 10 A or more,
depending on the layout of the saturable inductor. For this
reason the described circuit is called a magnetic regulator
or magnetic amplifier.
2013 Jul 31
43
3R1 Toroid
Vout
Vt
handbook, full pagewidth
Ireset
Switch
Iout
Ireset
Vref
increasing I reset
100 mA (typ.)
I reset
10 A (typ.)
Iout
tb td
td
tb td
CBW353
MBG009
magnetic
induction
(mT)
output
voltage
(V)
6
200
200
MBG010
400
handbook, halfpage
handbook, halfpage
50
100
400
400
150
200
250
control current (mA)
2013 Jul 31
200
0
200
400
magnetic field strength (A/m)
44
Ferroxcube
Soft Ferrites
Applications
;;;;;
;;;;;
;;;;;
;;;;
;;;;
dB
EMS level
receiver
EMS limit
EMC margin
source
EME limit
safety margin
supplier
EME level
frequency
MBW418
handbook, halfpage
I
Zi
interference
source
ZL
Ui
I
Zi
interference
source
Ui
Zs
Zp
ZL
Ip
IL
MBW400
2013 Jul 31
Zs
45
Ferroxcube
Soft Ferrites
Applications
The materials and beads are fully guaranteed for their
main feature, impedance as a function of frequency.
CBW474
150
handbook, halfpage
BD5/2/10
Z
()
120
90
3S1
3S4
60
4S2
30
BEADS
10
102
f (MHz)
103
2013 Jul 31
46
Ferroxcube
Soft Ferrites
Applications
MBW420
150
ZS
()
no DC
100 mA
300 mA
120
90
1A
3A
60
30
10 2
10
10 3
frequency (MHz)
Fig.48 Impedance as a function of frequency at different DC levels for material grade 4S2;
bead size 5 2 10 mm.
MBG011
100
ZS
()
80
60
40
no DC
100 mA
300 mA
1A
2A
20
10 2
10
frequency (MHz)
Fig.49 Impedance as a function of frequency at different DC levels for material grade 3S1;
bead size 5 2 10 mm.
2013 Jul 31
47
10 3
Ferroxcube
Soft Ferrites
BEADS
Applications
ON WIRE
handbook, halfpage
FERRITE BEADS
MBW346
50
handbook, halfpageBDS3/1.8/5.3
4S2
Z
()
40
Z
()
3S1
30
20
20
10
10
10
100
f (MHz) 1000
2013 Jul 31
0A
1A
2A
3A
4A
5A
40
30
MBW347
50
handbook, halfpageBDS3/1.8/5.3-4S2
10
100
f (MHz) 1000
48
Ferroxcube
Soft Ferrites
SMD
Applications
handbook, halfpage
MBW358
MBW348
200
MBW349
200
handbook, halfpage
CMS2-5.6/3/4.8-4S2
handbook, halfpage
CMS4-11/3/4.8-4S2
Z
()
Z
()
160
160
2 turns
120
2 turns
120
80
80
1 turn
40
1 turn
outer channel
40
inner channel
10
100
f (MHz) 1000
2013 Jul 31
10
100
f (MHz) 1000
49
Ferroxcube
Soft Ferrites
WIDEBAND
Applications
CHOKES
MBW421
1000
handbook, halfpage
WBC2.5
Z
()
4B1
800
600
MSB614
400
3B1
200
10
102
f (MHz)
103
2013 Jul 31
50
Ferroxcube
Soft Ferrites
SMD
Applications
WIDEBAND CHOKES
handbook, halfpage
MBW350
1000
MBW351
handbook, halfpage
WBS2.5-5/4.8/10
handbook, halfpage
Z
()
IL
(dB)
4B1
800
3A
5
2A
600
10
400
15
3B1
200
0A
20
10
100
25
f (MHz) 1000
2013 Jul 31
1A
WBS2.5-5/4.8/10-3B1
10
100
f (MHz) 1000
51
Ferroxcube
Soft Ferrites
Applications
C ABLE SHIELDS
Also in our range are so-called cable shields. These
products are an effective remedy against common-mode
interference on coaxial or flat cables. They come in several
shapes: round tubes, rectangular sleeves and split sleeves
to mount on existing cable connections.
MBW361
250
handbook, halfpage
CSF38/12/25-3S4
Z
()
200
150
100
handbook, halfpage
50
10
102
f (MHz)
MBW360
2013 Jul 31
52
103
Ferroxcube
Soft Ferrites
R ODS
Applications
The intersection of this line with the curve of the material
permeability gives the effective rod permeability.
AND TUBES
N A
L = 0 rod ----------- ( H )
l
where:
N = number of turns
I = length of coil.
MBW422
i = 10.000
103
5000
2000
1000
700
500
rod
400
300
200
150
102
100
70
40
20
10
10
10
102
Fig.64 Rod permeability (rod) as a function of length to diameter ratio with material permeability as a parameter.
2013 Jul 31
53
Ferroxcube
International Electrotechnical Vocabulary (IEV) - Chapter 221 : Magnetic materials and components General terms
60133
Dimensions for pot cores made of magnetic oxides and associated parts (replaced by 62317-2)
60205
60367
60401
60401-1
60401-2
60401-3
Part 3 : Guidelines on the format of data appearing in manufacturers catalogues of transformer and
inductor cores
60424-1
Ferrite cores - Guide on the limits of surface irregularities - Part 1 : General specification
60431
Dimensions of square cores (RM cores) made of magnetic oxides and associated parts (replaced by
62317-4)
60647
Dimensions for magnetic oxide cores intended for use in power supplies (EC cores) (replaced by
62317-11)
61185
Magnetic oxide cores (ETD cores) intended for use in power supply applications - Dimensions (replaced
by 62317-6)
61246
Magnetic oxide cores (E cores) of rectangular cross-section and associated parts - Dimensions
(replaced by 62317-8)
61247
PM cores made of magnetic oxides and associated parts - Dimensions (replaced by 62317-10)
61332
61596
Magnetic oxide EP cores and associated parts for use in inductors and transformers - Dimensions
(replaced by 62317-5)
61604
61631
Test method for the mechanical strength of cores made of magnetic oxides
61760-1
Surface mounting technology - Part 1 : Standard method for the specification of surface mounting
components (SMDs)
61860
62024-1
High frequency inductive components - Electrical characteristics and measuring methods - Part 1 :
Nanohenry range chip inductor
62025-1
High frequency inductive components - Non-electrical characteristics and measuring methods - Part 1 :
Fixed surface mount inductors for use in electronic and telecommunication equipment
62044
62044-1
62044-2
62044-3
62211
62313
Ferrite cores - Shapes and dimensions for planar magnetics applications (replaced by 62317-9)
2013 Jul 31
54
Ferroxcube
62317-1
62317-2
62317-3
62317-4
Part 4: RM cores
62317-5
Part 5: EP cores
62317-6
62317-7
62317-8
Part 8: E cores
62317-9
62317-10
62317-11
62317-12
62317-13
Part 13 : PQ cores
62317-14
62323
Dimensions of half pot cores made of ferrite for inductive proximity switches (replaced by 62317-3)
62333
62333-1
62333-2
62358
62398
Environmental testing
60286
60286-1
60286-2
60286-3
2013 Jul 31
55
Ferroxcube
2.
3.
4.
5.
6.
7.
S. Smith Van Nostrand Reinhold Co., 135 West 50th St., New
York, NY 10020
8.
Ordean Kiltie, O. Kiltie & Co. 2445 Fairfield, Ft. Wayne, IN 46807
9.
Edited by: Dr. F. Lee & Dr. D. Chen, VPEC, Vol. III, 1990. Tel: (703)
231-4536
J.K. Watson, John Wiley & Sons, Inc. 605 Third Ave., New York,
NY 10016
2013 Jul 31
56
Ferroxcube
Soft Ferrites
2013 Jul 31
57
Ferroxcube
Soft Ferrites
CBW629
2013 Jul 31
58
Ferroxcube
Soft Ferrites
Properties specified in this section are related to room temperature (25 C) unless otherwise stated.
They have been measured on sintered, non ground ring cores of dimensions 25 15 10 mm which are not subjected to
external stresses. Products generally comply with the material specification. However, deviations may occur due to shape,
size and grinding operations etc. Specified product properties are given in the data sheets or product drawings.
FREQUENCY
RANGE
(MHZ)
< 0.1
i
at 25 C
Bsat (mT)
at 25 C
(1200 A/m)
TC
(C)
(m)
FERRITE
TYPE
AVAILABLE
CORE SHAPES
3B46
3800
545
255
10
MnZn
3B7
2300
440
170
MnZn
MATERIAL
0.2 2
3D3
750
380
200
MnZn
< 0.2
3H3
2000
360
160
MnZn
3E27
6000
430
150
0.5
MnZn
3E28
4000
440
145
MnZn
Wideband signal
transformers
Pulse transformers
Delay lines
3E5
10000
380
125
0.5
MnZn
3E55
10000
370
100
0.1
MnZn
3E6
12000
390
130
0.1
MnZn
3E7
15000
390
130
0.1
MnZn
3E8
18000
380
100
0.1
MnZn
3E9
20000
380
100
0.1
MnZn
Line output
transformers (LOT)
< 0.2
3C30
2100
500
240
MnZn
< 0.3
3C34
2100
500
240
MnZn
Power transformers
Power inductors
General purpose
transformers and
inductors
< 0.2
3C81
2700
450
210
MnZn
< 0.2
3C90
2300
470
220
MnZn
< 0.3
3C91
3000
470
220
MnZn
< 0.2
3C92
1500
520
280
MnZn
< 0.3
3C93
1800
500
240
MnZn
< 0.3
3C94
2300
470
220
MnZn
< 0.3
3C95
3000
530
215
MnZn
< 0.4
3C96
2000
500
240
MnZn
0.2 0.5
3F3
2000
440
200
MnZn
0.5 1
3F35
1400
500
240
10
MnZn
12
3F4
900
410
220
10
MnZn
12
3F45
900
420
300
10
MnZn
24
3F5
650
380
300
10
MnZn
4 10
4F1
80
320(1)
260
105
NiZn
10 100
3B1
900
380
150
0.2
MnZn
1 30
3S1
4000
400
125
MnZn
Wideband
EMI-suppression
Wideband
transformers
Balun transformers
2013 Jul 31
30 1000
3S3
350
320
225
104
MnZn
10 300
3S4
1700
320
110
103
MnZn
1 30
3S5
3800
545
255
10
MnZn
30 1000
4A11
850
340
125
105
NiZn
10 300
4A15
1200
350
125
105
NiZn
10 300
4A20
2000
260
100
105
NiZn
30 1000
4B1
250
360(1)
250
105
NiZn
50 1000
4C65
125
380(1)
350
105
NiZn
30 1000
4S2
850
340
125
105
NiZn
30 1000
4S3
250
360(1)
250
105
NiZn
59
Toroids
UR
E, EI, Planar E, EC,
EFD, EP, ETD, ER,
Planar ER, U, RM/I,
RM/ILP, P, P/I, PT,
PTS, PM, PQ,
Toroids (gapped),
Bobbin cores
Ferroxcube
Soft Ferrites
MAIN
APPLICATION
AREA
FREQUENCY
RANGE
(MHZ)
Bsat (mT)
at 25 C
(1200 A/m)
3C11
4300
3E25
6000
3E26
3E5
3E6
TC
(C)
(m)
390
125
MnZn
390
125
0.5
MnZn
7000
430
155
0.5
MnZn
10000
380
125
0.5
MnZn
12000
390
130
0.1
MnZn
4A11
850
340
125
105
NiZn
<1
3B1
900
380
150
0.2
MnZn
<2
3D3
750
380
200
MnZn
EMI-filters
Current
compensated
chokes
HF Tuning
i
at 25 C
MATERIAL
FERRITE
TYPE
AVAILABLE
CORE SHAPES
Toroids
E, EI, U
Rods, Tubes,
Wideband chokes
<5
4B1
250
360(1)
250
105
NiZn
<5
4B2
250
360(1)
335
105
NiZn
< 20
4C65
125
380(1)
350
105
NiZn
< 50
4D2
60
250(2)
400
105
NiZn
< 200
4E1
15
220(3)
500
105
NiZn
magnetic regulators
< 0.2
3R1
800
410
230
103
MnZn
Toroids
absorber tiles
< 1000
4S60
2000
260
100
105
NiZn
Tiles
scientific particle
accelerators
< 10
4B3
300
420(1)
250
105
NiZn
< 100
4E2
25
350(2)
400
105
NiZn
< 10
4M2
140
310(1)
200
105
NiZn
Large toroids
Machined ferrite
products
<1
8C11
1200
310
125
105
NiZn
< 10
8C12
900
260
125
105
NiZn
1. At 3000 A/m
2. At 10 kA/m
3. At 20 kA/m
Iron powder material grade survey
IRON
POWDER
MATERIAL
i
at 25 C
B sat (mT)
at 25 C
(3 000 A/m)
MAXIMUM OPERATING
TEMPERATURE
(C)
2P40
40
950
140
2P50
50
1000
140
2P65
65
1150
140
2P80
80
1400
140
2P90
90
1600
140
MAIN
APPLICATION
AREA
EMI-suppression
Output inductors
AVAILABLE
CORE SHAPES
Toroids
MnZn FERRITE
NiZn FERRITE
UNIT
Youngs modules
(90 to 150) 10 3
N/mm2
200 to 600
200 to 700
N/mm2
20 to 65
30 to 60
N/mm2
Vickers hardness
600 to 700
N/mm2
800 to 900
6
K1
(10 to 12) 10
Specific heat
700 to 800
750
Jkg1 K1
Heat conductivity
(3.5 to 5.0) 10 3
Jmm1s1 K1
2013 Jul 31
(7 to 8) 10
60
Ferroxcube
Soft Ferrites
R ESISTIVITY
Table 4
FREQUENCY
(MHz)
20
10
7
20
50
100
Table 2
0
60
106
100
105
100
103
0.5
10
0.1
100
2013 Jul 31
105
0.01
61
5.104
104
FREQUENCY
(MHz)
RESISTIVITY
(m)
0.1
2.105
100
PERMITTIVITY
(r)
0.1
10
Table 6
FREQUENCY
(MHz)
FREQUENCY
(MHz)
5.104
104
5.107
107
1
10
Table 5
RESISTIVITY
(m)
20
105
TEMPERATURE
(C)
0.1
RESISTIVITY
(m)
RESISTIVITY
(m)
PERMITTIVITY
TEMPERATURE
(C)
PERMITTIVITY
(r)
0.001
100
0.01
50
25
10
15
100
12
Ferroxcube
Material specification
2P..
Material grade specification - 2P80
2P.. SPECIFICATIONS
SYMBOL
i
tan/ i
CONDITIONS
25 C; 10 kHz;
0.25 mT
25 C; 100 kHz;
0.25 mT
from 25 103 A/m
from 25 103 A/m
H = 25 103 A/m
25 to 55 C
VALUE
UNIT
Br
HC
B
F
Tmax
40 10%
1500 106
250
2000
950
10 106
160
mT
A/m
mT
K1
C
SYMBOL
tan/ i
Br
HC
B
F
Tmax
CONDITIONS
25 C; 10 kHz;
0.25 mT
25 C; 100 kHz;
0.25 mT
from 25 103 A/m
from 25 103 A/m
H = 25 103 A/m
25 to 55 C
VALUE
SYMBOL
i
tan/ i
UNIT
Br
HC
B
F
Tmax
50 10%
1500 106
300
1800
1000
20 106
140
mT
A/m
mT
K1
C
i
tan/ i
Br
HC
B
F
Tmax
CONDITIONS
25 C; 10 kHz;
0.25 mT
25 C; 100 kHz;
0.25 mT
from 25 103 A/m
from 25 103 A/m
H = 25 103 A/m
25 to 55 C
VALUE
UNIT
65 10%
10 2
1000 106
350
1500
1150
15 106
140
400
1200
1400
15 106
140
CONDITIONS
25 C; 10 kHz;
0.25 mT
25 C; 100 kHz;
0.25 mT
from 25 103 A/m
from 25 103 A/m
H = 25 103 A/m
25 to 55 C
mT
A/m
mT
K1
C
VALUE
UNIT
90 10%
1000 106
450
900
1600
15 106
140
mT
A/m
mT
K1
C
MBW210
2P..
2P90
2P80
2P65
2P50
mT
A/m
mT
K1
C
10
2P40
1
10 2
10
Fig.1
2013 Jul 31
UNIT
1000 106
10 3
handbook, halfpage
VALUE
80 10%
CONDITIONS
25 C; 10 kHz;
0.25 mT
25 C; 100 kHz;
0.25 mT
from 25 103 A/m
from 25 103 A/m
H = 25 103 A/m
25 to 55 C
62
f (MHz)
Initial permeability as a
function of frequency.
10
Ferroxcube
Material specification
2P..
MBW211
400
handbook, halfpage
2P..
T=25 C
2P..
B
(mT)
2P90
300
MBW208
2000
handbook, halfpage
2P90
1500
2P80
2P80
2P65
2P65
200
1000
2P50
2P50
2P40
100
300
B (mT)
0
5000
400
Amplitude permeability as a
function of peak flux density.
MBW212
10 4
handbook, halfpage
o
T = 25 C
2P..
2P..
10 2
10 3
kHz
kHz
20
500
2P80
10
(kW/m 3)
2P90
kHz
kHz
Pv
100
rev
5000
MBW206
10 3
handbook, halfpage
kHz
Fig.2
200
50
100
kHz
200
500
2P40
2P65
2P50
2P40
10
1
1
10
Fig.4
2013 Jul 31
10
10 2
10 3
10
4
H (A/m) 10
Reversible permeability as a
function of magnetic field strength.
Fig.5
63
10
10 2
B (mT)
10 3
Ferroxcube
Material specification
Sendust
SENDUST SPECIFICATIONS
The most economic medium frequency alloy powder
material with high saturation flux density and low loss
density for use in power inductors and output chokes.
CONDITIONS
VALUE
25 C; 10 kHz;
0.25 mT
26 125
500
0.08
TC
thermal
conductivity
linear
expansion
coefficient
density for
125
140
UNIT
's
C
W.mm -1.K-1
MFP208
Sendust
100
90
80
75
60
60
40
kg/m3
7000
26
20
0
1
10
Fig.1
2.5
i
(%)
2.5
100
f (kHz)
B
(mT)
60
26
75
MFP210
1200
Sendust
1000
26
90
1000
Initial permeability as a
function of frequency.
MFP209
Sendust
125
800
125
60
7.5
125
120
75
60
600
90
90
400
125
200
17.5
60 40 20
Fig.2
2013 Jul 31
26
75
12.5
20
40
60
80
0
0.1
100 120
T ( o C)
Initial permeability as a
function of temperature.
10
64
H (A/m)
100
Ferroxcube
Material specification
a
(%)
Sendust
MFP211
100
(%) 90
125
Sendust
90
80
Sendust
70
75
2
26
125
60
60
90
50
26
MFP212
60
40
75
30
20
10
10
Fig.4
MFP213
10000
25
z
kH
kH
z
Pv
(kW/m3)
50
10
1000
Fig.5
Sendust
0k
Pv
(kW/m3)
B (mT)
0
0.1
1000
Amplitude permeability as a
function of peak flux density.
Hz
10000
100
1000
100
10
10
Fig.6
2013 Jul 31
10
H (kA/m)
100
Reversible permeability as a
function of magnetic field strength.
MFP214
Sendust
50
0k
Hz
30
0
20 kH
0k z
Hz
10
0k
Hz
50
kH
z
25
kH
z
1
1
100
100
B (mT)
10
10
1000
Fig.7
65
100
B (mT)
1000
Ferroxcube
Material specification
MPP
MPP SPECIFICATIONS
A medium frequency alloy powder material with the
lowest loss density for use in power inductors and
output chokes.
CONDITIONS
VALUE
25 C; 10 kHz;
0.25 mT
14 300
460
0.08
TC
thermal
conductivity
linear
expansion
coefficient
density for
125
MFP201
350
UNIT
's
C
W.mm -1.K-1
MPP
300
300
250
200
200
150
160
125
100
kg/m3
8700
50
60
26
14
0
1
10
Fig.1
i
(%)
MFP202
MPP
300
800
B
(mT) 700
200
600
160
500
125
400
60
300
100
f (kHz)
Initial permeability as a
function of frequency.
MFP203
MPP
125
300
26
147
160
26
173
14
200
14
40
Fig.2
2013 Jul 31
60
200
14
100
300
1000
40
80
120
0
0.1
160
200
T ( o C)
Initial permeability as a
function of temperature.
10
66
H (A/m)
100
Ferroxcube
Material specification
MPP
MFP204
100
(%) 90
MPP
4
300
80
14
MPP
160
147
70
200
173
50
125
200
40
60
14 & 26
60
300
30
26
125
60
20
10
1
10
Fig.4
100
B (mT)
0
0.1
1000
Amplitude permeability as a
function of peak flux density.
Fig.5
10
MFP206
2013 Jul 31
z
kH
z
0.1
0.1
Fig.6
kH
50
10
kH
z
kH
kH
100
10
Hz
1
kH 2
kH
50 z
z
0
H
z
10
MPP
10
kH
z
30
0
50
0
10
20
k
10 Hz
kH
5 z
kH
2 z
kH
z
100
z
kH
100
MFP207
10000
Pv
3
(kW/m )
1000
MPP
kH
z
10000
Pv
(kW/m3)
1000
0.01
H (kA/m)
Reversible permeability as a
function of magnetic field strength.
25
MFP205
30
0
a
(%)
0.01
10
100
B (mT)
0.001
1000
Fig.7
67
10
100
B (mT)
1000
Ferroxcube
Material specification
High Flux
CONDITIONS
VALUE
25 C; 10 kHz;
0.25 mT
14 160
UNIT
500
0.08
TC
thermal
conductivity
linear
expansion
coefficient
density for
125
5.8 x
's
High Flux
160
160
140
C
W.mm -1.K-1
10-6
MFP198
180
125
120
100
K-1
80
60
60
40
kg/m3
8200
26
20
0
14
10
Fig.1
i
(%)
B
(mT)
160
125
60
14
MFP194
1400
High Flux
1200
125
60
800
14
160
600
26
26
60
125
1000
Initial permeability as a
function of frequency.
1000
26
f (kHz)
MFP197
High Flux
100
400
160
4
60 40 20
Fig.2
2013 Jul 31
14
200
3
0
20
40
60
80
0
0.1
100 120
T ( o C)
Initial permeability as a
function of temperature.
10
68
H (A/m)
100
Ferroxcube
Material specification
a
(%)
High Flux
MFP195
28
High Flux
160
24
MFP196
100
(%) 90
14
High Flux
80
20
26
160
70
125
60
16
60
60
50
12
40
26
30
20
14
4
0
125
10
1
10
Fig.4
100
B (mT)
0
0.1
1000
Amplitude permeability as a
function of peak flux density.
Fig.5
10
MFP200
kH
z
5
kH
z
Fig.6
2013 Jul 31
60
100
B (mT)
0.1
10
1000
Fig.7
69
H
z
H
z
10
0
H
z
60
10
0
H
z
10
0.1
10
kH
z
kH
z
20
kH
z
z
kH
10
kH
z
kH
z
5
50
20
20
10
100
kH
z
z
kH
kH
z
20
kH
z
50
10
kH
1000
Pv
3
(kW/m )
High Flux
kH
High Flux
100
100
Reversible permeability as a
function of magnetic field strength.
MFP199
1000
Pv
3
(kW/m )
H (kA/m)
100
B (mT)
1000
Ferroxcube
Material specification
3B1
3B1 SPECIFICATIONS
Medium permeability MnZn ferrite for use in wideband
EMI-suppression (10 - 100 MHz) as well as RF tuning,
wideband and balun transformers.
SYMBOL
i
CONDITIONS
25 C; 10 kHz;
0.25 mT
25 C; 10 kHz;
1200 A/m
100 C; 10 kHz;
1200 A/m
25 C; 450 kHz;
0.25 mT
DC; 25 C
tan/ i
TC
density
VALUE
MBW315
10 4
handbook, halfpage
's , ''s
UNIT
900 20%
3B1
's
10 3
380
mT
''s
230
10 2
50 106
0.2
150
4 800
m
C
kg/m3
10
10 1
Fig.1
MBW316
2000
handbook, halfpage
f (MHz)
10
Complex permeability as
a function of frequency.
MBW317
500
25 oC
100 oC
handbook, halfpage
3B1
10
B
(mT)
3B1
400
1500
300
1000
200
500
100
0
50
50
Fig.2
2013 Jul 31
150
T ( o C)
250
Initial permeability as a
function of temperature.
50
50
100
500
1000
H (A/m)
70
Ferroxcube
Soft Ferrites
2013 Jul 31
71
Ferroxcube
Material specification
3B46
3B46 SPECIFICATIONS
A medium permeability material with high saturation
flux density. This material is suitable as linear filter
choke with dc bias current, over a broad temperature
range. It has been specifically designed for use in
POTS-splitters for DSL applications.
SYMBOL
CONDITIONS
VALUE
545
100 C; 10 kHz;
1200 A/m
435
25 C; 10 kHz; 0.25 mT
0.6 106
tan/i
10 3
''s
10 2
4.4 106
K1
2.2 106
K1
DC; 25 C
10
255
4800
kg/m3
density
's
mT
TC
3B46
's , ''s
UNIT
MFP034
10 4
10
10 1
Fig.1
MFP035
5000
4000
10
f (MHz)
10
Complex permeability as
a function of frequency.
MFP036
600
B
(mT)
500
3B46
3B46
25 C
100 oC
400
3000
300
2000
200
1000
100
0
50
50
Fig.2
2013 Jul 31
150
250
T ( C)
350
Initial permeability as a
function of temperature.
25
25
50
400
72
800
1200
H (A/m)
Ferroxcube
Material specification
3B46
MFP037
10 4
3B46
o
25 C
100 oC
rev
10 3
10 2
10
1
Fig.4
2013 Jul 31
10
10 2
H (A/m) 10
Reversible permeability as a
function of magnetic field strength.
73
Ferroxcube
Material specification
3B7
3B7 SPECIFICATIONS
A low frequency filter material optimized for
frequencies up to 0.1 MHz.
SYMBOL
i
CONDITIONS
VALUE
25 C; 10 kHz;
0.25 mT
25 C; 10 kHz;
1200 A/m
100 C; 10 kHz;
1200 A/m
25 C; 100 kHz;
0.25 mT
25 C; 500 kHz;
0.25 mT
25 C; 1 MHz; 0.25 mT
25 C; 10 kHz; 0.25 mT
+20 to 70 C; 10 kHz;
0.25 mT
DC, 25 C
tan/i
DF
F
TC
density
UNIT
440
3B7
's , ''s
2300 20%
10 3
mT
's
''s
320
10 2
5 106
25 106
120 106
4.5 106
(0 0.6)
106
1
170
4800
10
10 1
10
f (MHz)
10 2
K1
m
C
kg/m3
Fig.1
Complex permeability as
a function of frequency.
MBW058
5000
handbook, halfpage
3B7
MBW020
500
25oC
100oC
handbook, halfpage
4000
B
(mT)
3B7
400
3000
300
2000
200
1000
100
0
50
50
150
T ( o C)
250
0
Fig.2
2013 Jul 31
MBW057
10 4
handbook, halfpage
Initial permeability as a
function of temperature.
25
25
50
150
H (A/m)
74
250
Ferroxcube
Material specification
3B7
MBW077
4000
f = 10 kHz
o
T=25 C
handbook, halfpage
3B7
3000
2000
0.2 s
2 s
1000
0.1 s
1 s
0.5 s
100
200
300
B (mT)
400
2013 Jul 31
75
Ferroxcube
Material specification
3C11
3C11 SPECIFICATIONS
A medium permeability material mainly for use in
current compensated chokes in EMI-suppression
filters.
SYMBOL
i
B
tan/ i
TC
density
CONDITIONS
VALUE
25 C; 10 kHz;
0.25 mT
25 C; 10 kHz;
1200 A/m
100 C; 10 kHz;
1200 A/m
25 C; 100 kHz;
0.25 mT
25 C; 300 kHz;
0.25 mT
DC; 25 C
4300 20%
MBW252
10 5
3C11
's , ''s
UNIT
10 4
390
's
mT
230
''s
10 3
20 106
200 106
1
125
4 900
10
10 2
m
C
kg/m3
10
Fig.1
handbook, halfpage
25 oC
100 oC
B
(mT)
10
3C11
400
3C11
f (MHz)
MBW254
500
MBW253
Complex permeability as
a function of frequency.
handbook, halfpage
10000
300
7500
200
5000
100
2500
0
0
50
50
Fig.2
2013 Jul 31
150
T ( o C)
25
25
50
150
H (A/m)
250
Initial permeability as a
function of temperature.
76
250
Ferroxcube
Material specification
3C11
MBW255
10 4
handbook, halfpage
3C11
rev
10 3
10 2
10
1
Fig.4
2013 Jul 31
10
10 2
3
H (A/m) 10
Reversible permeability as a
function of magnetic field strength.
77
Ferroxcube
Material specification
3C30
3C30 SPECIFICATIONS
A low frequency, high Bsat power material optimized
for use in line output transformers at frequencies up to
0.2 MHz.
SYMBOL
i
CONDITIONS
25 C; 10 kHz;
0.25 mT
100 C; 25 kHz;
200 mT
25 C; 10 kHz;
1200 A/m
100 C; 10 kHz;
1200 A/m
100 C; 25 kHz;
200 mT
100 C; 100 kHz;
100 mT
100 C; 100 kHz;
200 mT
DC; 25 C
a
B
PV
TC
density
VALUE
10 3
''s
500
mT
10 2
440
kW/m3
80
10
10 1
80
2
240
4 800
m
C
kg/m3
Fig.1
10
10 2
f (MHz)
25 oC
100 oC
B
(mT)
400
3000
300
2000
200
1000
100
T ( o C)
CBW459
500
4000
150
Complex permeability as
a function of frequency.
handbook, halfpage
3C30
2013 Jul 31
450
CBW543
Fig.2
's
5000 25%
5000
50
3C30
's , ''s
UNIT
2100 20%
handbook, halfpage
0
50
CBW542
10 4
250
Initial permeability as a
function of temperature.
25
25
50
3C30
150
H (A/m)
78
250
Ferroxcube
Material specification
3C30
CBW460
8000
25 oC
100 oC
handbook, halfpage
CBW544
10 4
handbook, halfpage
3C30
3C30
rev
6000
10 3
4000
10 2
2000
100
Fig.4
200
300
B (mT)
10
400
Amplitude permeability as a
function of peak flux density.
Fig.5
CBW462
10 4
handbook, halfpage
T = 100 oC
Reversible permeability as a
function of magnetic field strength.
CBW466
800
3C30
200
kH
z
100
kHz
kHz
Pv
(kW/m 3 )
f
B
(kHz) (mT)
600
100
200
200
100
100
25
100
200
kHz
50
10 3
3
H (A/m) 10
handbook, halfpage
3C30
Pv
(kW/m 3)
10 2
10
25
400
10 2
200
10
1
Fig.6
2013 Jul 31
10
10 2
B (mT)
10 3
Fig.7
79
40
80
120
T (o C)
Ferroxcube
Material specification
3C34
3C34 SPECIFICATIONS
A medium frequency, high Bsat power material
optimized for use in line output transformers at
frequencies up to 0.3 MHz.
SYMBOL
i
CONDITIONS
25 C; 10 kHz;
0.25 mT
100 C; 25 kHz;
200 mT
25 C; 10 kHz;
1200 A/m
100 C; 10 kHz;
1200 A/m
100 C; 100 kHz;
100 mT
100 C; 100 kHz;
200 mT
DC; 25 C
a
B
PV
TC
density
VALUE
10 3
''s
500
mT
440
mT
60
kW/m3
10 2
10
10 1
400
5
240
4 800
m
C
kg/m3
300
2000
200
1000
100
2013 Jul 31
T ( o C)
25 oC
100 oC
B
(mT)
3000
250
Initial permeability as a
function of temperature.
f (MHz)
25
25
50
3C34
150
H (A/m)
80
10 2
CBW439
500
400
10
Complex permeability as
a function of frequency.
handbook, halfpage
4000
150
Fig.1
3C34
Fig.2
's
6500 25%
CBW468
50
3C34
's , ''s
UNIT
2100 20%
5000
0
50
CBW575
10 4
handbook, halfpage
250
Ferroxcube
Material specification
3C34
CBW442
8000
25 oC
100 oC
handbook, halfpage
CBW577
10 4
handbook, halfpage
3C34
3C34
rev
6000
10 3
4000
10 2
2000
100
Fig.4
200
300
B (mT)
10
400
Amplitude permeability as a
function of peak flux density.
Fig.5
CBW454
10 4
handbook, halfpage
T = 100 oC
Reversible permeability as a
function of magnetic field strength.
CBW470
800
3C34
Pv
(kW/m 3 )
Pv
200
kH
z
100
kHz
f
B
(kHz) (mT)
600
100
200
200
100
25
100
200
100
kHz
50
kHz
10 3
3
H (A/m) 10
handbook, halfpage
3C34
(kW/m 3)
10 2
10
25
400
10 2
200
10
1
10
10 2
B (mT)
10 3
Fig.7
Fig.6
2013 Jul 31
81
40
80
120
T (o C)
Ferroxcube
Material specification
3C81
3C81 SPECIFICATIONS
A low frequency power material with minimum power
losses around 60 C for use in power and general
purpose transformers at frequencies up to 0.2 MHz.
SYMBOL
i
a
B
PV
TC
density
CONDITIONS
VALUE
25 C; 10 kHz;
0.25 mT
100 C; 25 kHz;
200 mT
25 C; 10 kHz;
1200 A/m
100 C; 10 kHz;
1200 A/m
100 C; 25 kHz;
200 mT
DC; 25 C
2700 20%
MBW023
10 4
handbook, halfpage
3C81
's , ''s
UNIT
10 3
's
5500 20%
''s
450
mT
10 2
360
185
kW/m3
1
210
4 800
m
C
kg/m3
10
10 1
Fig.1
MBW032
5000
i
B
(mT)
400
3000
300
2000
200
1000
100
0
50
50
Fig.2
2013 Jul 31
150
T ( o C)
250
Initial permeability as a
function of temperature.
25
25
50
3C81
150
H (A/m)
82
10
MBW016
25oC
100oC
handbook, halfpage
4000
f (MHz)
Complex permeability as
a function of frequency.
500
3C81
handbook, halfpage
10
250
Ferroxcube
Material specification
3C81
MBW044
8000
handbook, halfpage
25 oC
100 oC
MBW039
10 4
handbook, halfpage
3C81
3C81
rev
6000
10 3
4000
10 2
2000
100
Fig.4
200
300
B (mT)
10
400
Amplitude permeability as a
function of peak flux density.
Fig.5
MBW051
10 4
handbook, halfpage
o
T = 100 C
Reversible permeability as a
function of magnetic field strength.
MBW053
3C81
handbook, halfpage
Pv
(kW/m 3 )
200
kH
z
100
kHz
50
k
25
kHz Hz
10 3
3
H (A/m) 10
800
3C81
Pv
(kW/m 3)
10 2
10
f
B
(kHz) (mT)
600
200
100
400
10 2
200
10
1
Fig.6
2013 Jul 31
10
10 2
B (mT)
10 3
Fig.7
83
40
80
100
100
25
200
120
T (o C)
Ferroxcube
Material specification
3C90
3C90 SPECIFICATIONS
A low frequency power material for use in power and
general purpose transformers at frequencies up to
0.2 MHz.
CONDITIONS
i
a
B
PV
TC
density
25 C; 10 kHz;
0.25 mT
100 C; 25 kHz;
200 mT
25 C; 10 kHz;
1200 A/m
100 C; 10 kHz;
1200 A/m
100 C; 25 kHz;
200 mT
100 C; 100 kHz;
100 mT
100 C; 100 kHz;
200 mT
DC, 25 C
VALUE
10 3
''s
470
mT
380
mT
80
kW/m3
10 2
10
10 1
80
5
220
4800
m
C
kg/m 3
Fig.1
10
f (MHz)
10 2
25oC
100oC
B
(mT)
3000
300
2000
200
1000
100
T ( o C)
MBW093
500
400
150
Complex permeability as
a function of frequency.
handbook, halfpage
4000
2013 Jul 31
450
3C90
Fig.2
's
5500 25%
CBW480
50
3C90
's , ''s
UNIT
2300 20%
5000
0
50
CBW478
10 4
handbook, halfpage
250
Initial permeability as a
function of temperature.
25
25
50
3C90
150
H (A/m)
84
250
Ferroxcube
Material specification
3C90
MBW094
8000
25 oC
100 oC
handbook, halfpage
CBW479
10 4
handbook, halfpage
3C90
3C90
rev
6000
10 3
4000
10 2
2000
100
Fig.4
200
300
B (mT)
10
400
Amplitude permeability as a
function of peak flux density.
Fig.5
MBW098
10 4
handbook, halfpage
o
T = 100 C
Reversible permeability as a
function of magnetic field strength.
MBW097
3C90
handbook, halfpage
200
kH
z
100
kHz
kHz
Pv
(kW/m 3 )
f
B
(kHz) (mT)
600
100
200
200
100
100
25
100
200
kHz
50
10 3
3
H (A/m) 10
800
3C90
Pv
(kW/m 3)
10 2
10
25
400
10 2
200
10
1
Fig.6
2013 Jul 31
10
10 2
B (mT)
10 3
Fig.7
85
40
80
120
T (o C)
Ferroxcube
Material specification
3C91
3C91 SPECIFICATIONS
A medium frequency power material with minimum
power losses around 60 C for use in power and
general purpose transformers at frequencies up to
0.3 MHz.
SYMBOL
i
a
B
PV
TC
density
CONDITIONS
VALUE
25 C; 10 kHz;
0.25 mT
100 C; 25 kHz;
200 mT
25 C; 10 kHz;
1200 A/m
100 C; 10 kHz;
1200 A/m
60 C; 100 kHz;
100 mT
60 C; 100 kHz;
200 mT
DC, 25 C
3000 20%
's , ''s
UNIT
10 3
''s
470
mT
370
mT
40
kW/m3
10 2
10
10 1
5
220
4 800
m
C
kg/m3
Fig.1
CBW469
f (MHz)
10 2
6000
300
4000
200
2000
100
T ( o C)
25 oC
100 oC
B
(mT)
400
150
CBW437
500
8000
2013 Jul 31
10
Complex permeability as
a function of frequency.
handbook, halfpage
3C91
Fig.2
300
10000
50
3C91
's
5500 25%
handbook, halfpage
0
50
CBW574
10 4
handbook, halfpage
250
Initial permeability as a
function of temperature.
25
25
50
3C91
150
H (A/m)
86
250
Ferroxcube
Material specification
3C91
CBW441
8000
25 oC
100 oC
handbook, halfpage
CBW578
10 4
handbook, halfpage
3C91
3C91
rev
6000
10 3
4000
10 2
2000
Fig.4
100
200
300
B (mT)
10
400
Amplitude permeability as a
function of peak flux density.
Fig.5
CBW436
10 4
handbook, halfpage
T = 100 oC
Reversible permeability as a
function of magnetic field strength.
CBW471
handbook, halfpage
3C91
200
kHz
100
kHz
Pv
(kW/m 3 )
f
B
(kHz) (mT)
600
100
200
200
100
25
100
200
100
25
kHz
10 3
3
H (A/m) 10
800
3C91
Pv
(kW/m 3)
10 2
10
400
10 2
200
10
1
Fig.6
2013 Jul 31
10
10 2
B (mT)
10 3
Fig.7
87
40
80
120
T (o C)
Ferroxcube
Material specification
3C92
3C92 SPECIFICATIONS
A low frequency, high Bsat power material for use in
power inductors at frequencies up to 0.2 MHz.
SYMBOL
i
CONDITIONS
25 C; 10 kHz;
0.25 mT
100 C; 25 kHz;
200 mT
25 C; 10 kHz;
1200 A/m
100 C; 10 kHz;
1200 A/m
140 C; 10 kHz;
1200 A/m
100 C; 100 kHz;
100 mT
100 C; 100 kHz;
200 mT
DC; 25 C
a
B
PV
TC
density
VALUE
UNIT
's , ''s
1500 20%
5 000
mT
10 2
460
400
10
10 1
kW/m3
50
5
280
4 800
m
C
kg/m3
Fig.1
10
10 2
f (MHz)
6000
300
4000
200
2000
100
250
T ( C)
MFW003
25 oC
100 oC
B
(mT)
400
150
Complex permeability as
a function of frequency.
500
8000
2013 Jul 31
350
3C92
Fig.2
's
''s
540
MFW002
50
3C92
10 3
10000
0
50
MFW001
10 4
handbook, halfpage
350
Initial permeability as a
function of temperature.
25
25
50
3C92
150
88
H (A/m)
250
Ferroxcube
Material specification
3C92
MFW004
8000
25 C
100 oC
MFW005
10 4
3C92
3C92
rev
6000
10 3
4000
10 2
2000
100
Fig.4
200
300
B (mT)
10
400
Amplitude permeability as a
function of peak flux density.
10 2
10
Fig.5
3
H (A/m) 10
Reversible permeability as a
function of magnetic field strength.
MFW006
10 4
kH
kHz
100
kHz
500
f
B
(kHz) (mT)
600
25
kHz
10 3
3C92
Pv
(kW/m 3 )
Pv
(kW/m 3)
MFW007
800
3C92
T = 100 oC
200
400
100
200
200
100
25
100
200
100
10 2
200
10
1
Fig.6
2013 Jul 31
10
10 2
B (mT)
10
Fig.7
89
40
80
120
T (o C)
Ferroxcube
Material specification
3C93
3C93 SPECIFICATIONS
A low to medium frequency power material with
minimum power losses around 140 C for use in power
transformers at frequencies up to 0.5 MHz.
CONDITIONS
i
a
B
VALUE
PV
TC
density
50
kW/m3
DC; 25 C
5
240
4800
''s
10 2
10
10 1
350
m
C
kg/m3
Fig.1
MFW008
10000
i
400
6000
300
4000
200
2000
100
2013 Jul 31
f (MHz)
10 2
0
150
T ( o C)
MFW010
500
25 oC
100 oC
B
(mT)
8000
Fig.2
10
Complex permeability as
a function of frequency.
handbook, halfpage
3C93
50
300
handbook, halfpage
0
50
's
10 3
mT
3C93
's , ''s
UNIT
MFW009
10 4
handbook, halfpage
250
Initial permeability as a
function of temperature.
25
25
50
3C93
150
H (A/m)
90
250
Ferroxcube
Material specification
3C93
MFW011
8000
25 oC
100 oC
handbook, halfpage
MFW012
10 4
handbook, halfpage
3C93
3C93
rev
6000
10 3
4000
10 2
2000
10
0
100
Fig.4
200
300
B (mT)
Amplitude permeability as a
function of peak flux density.
Fig.5
MFW013
kH
500
Pv
(kW/m 3)
Reversible permeability as a
function of magnetic field strength.
MFW014
800
3C93
Pv
(kW/m 3 )
f
B
(kHz) (mT)
600
25
kHz
10 3
3
H (A/m) 10
handbook, halfpage
3C93
T = 140 oC
kHz
100
kHz
10 4
10 2
10
400
200
400
10 2
200
10
1
Fig.6
2013 Jul 31
10
10 2
B (mT)
10
40
Fig.7
91
80
120
100
200
200
100
25
100
200
100
160
T (o C)
Ferroxcube
Material specification
3C94
3C94 SPECIFICATIONS
A low frequency power material for use in power and
general purpose transformers at frequencies up to
0.3 MHz.
SYMBOL
i
CONDITIONS
25 C; 10 kHz;
0.25 mT
100 C; 25 kHz;
200 mT
25 C; 10 kHz;
1200 A/m
100 C; 10 kHz;
1200 A/m
100 C; 100 kHz;
100 mT
100 C; 100 kHz;
200 mT
DC, 25 C
a
B
PV
TC
density
VALUE
103
''s
470
mT
102
380
kW/m3
50
10
101
350
5
220
4 800
m
C
kg/m3
6000
300
4000
200
2000
100
2013 Jul 31
150
T (C)
25 C
100 C
B
(mT)
400
0
25
250
Initial permeability as a
function of temperature.
f (MHz)
25
50
3C94
150
H (A/m)
92
102
CBW238
500
8000
10
Complex permeability as
a function of frequency.
handbook, halfpage
3C94
Fig.1
CBW237
Fig.2
's
5500 25%
10000
50
3C94
's ,''s
UNIT
2300 20%
handbook, halfpage
0
50
CBW236
104
handbook, halfpage
250
Ferroxcube
Material specification
3C94
CBW239
8000
handbook, halfpage
25 C
100 C
CBW240
104
handbook, halfpage
3C94
3C94
rev
6000
103
4000
102
2000
100
Fig.4
200
300
B (mT)
10
400
Amplitude permeability as a
function of peak flux density.
Fig.5
CBW241
104
handbook, halfpage
T = 100 C
CBW242
3C94
Pv
200
kHz
100
kHz
(kW/m3)
f
B
(kHz) (mT)
600
kHz
103
Reversible permeability as a
function of magnetic field strength.
800
Pv
103
H (A/m)
handbook, halfpage
3C94
(kW/m3)
102
10
100
200
200
100
100
25
100
200
25
400
102
200
10
Fig.6
2013 Jul 31
10
102
B (mT)
103
Fig.7
93
40
80
T (C)
120
Ferroxcube
Material specification
3C95
3C95 SPECIFICATIONS
A low to medium frequency power material with low
power losses from 25 to 100 C for use in power
transformers at frequencies up to 0.5 MHz. Especially
suited for broad temperature range applications like
automotive, lighting and mobile / handheld.
MFP124
10000
3C95
handbook, halfpage
SYMBOL
CONDITIONS
VALUE
25 C; 10 kHz;
0.25 mT
100 C; 25 kHz;
200 mT
25 C; 10 kHz;
1200 A/m
100 C; 10 kHz;
1200 A/m
25 C; 100 kHz;
200 mT
100 C; 100 kHz;
200 mT
DC, 25 C
a
B
PV
TC
density
UNIT
8000
3000 20 %
6000
5000
530
mT
4000
410
2000
kW/m3
350
0
50
290
5
215
4 800
m
C
kg/m3
Fig.1
MFP125
500
25 oC
100 oC
B
(mT)
50
250
MFP126
8000
25 C
100 oC
400
T ( o C)
Initial permeability as a
function of temperature.
handbook, halfpage
3C95
150
3C95
6000
300
4000
200
2000
100
25
Fig.2
2013 Jul 31
25
50
150
H (A/m)
250
100
200
300
B (mT)
400
94
Ferroxcube
Material specification
3C95
MFP127
104
T = 100 C
Pv
(kW/m 3 )
200
kHz
100
kHz
f
B
(kHz) (mT)
600
kHz
400
103
3C95
handbook, halfpage
Pv
(kW/m3)
MFP128
800
3C95
400
100
200
200
400
100
50
100
100
102
200
10
10
102
B (mT)
103
Fig.5
Fig.4
2013 Jul 31
95
40
80
T (o C)
120
Ferroxcube
Material specification
3C96
3C96 SPECIFICATIONS
A low to medium frequency power material for use in
power and general purpose transformers at frequencies
up to 0.4 MHz.
CONDITIONS
i
25 C; 10 kHz;
0.25 mT
100 C; 25 kHz;
200 mT
25 C; 10 kHz;
1200 A/m
100 C; 10 kHz;
1200 A/m
100 C; 100 kHz;
100 mT
100 C; 100 kHz;
200 mT
100 C; 500 kHz;
50 mT
DC; 25 C
a
B
PV
TC
density
VALUE
''s
500
mT
10 2
440
kW/m3
40
10
10 1
300
5
240
4800
m
C
kg/m3
Fig.1
10
f (MHz)
10 2
25 oC
100 oC
B
(mT)
400
6000
300
4000
200
2000
100
T ( o C)
CBW438
500
8000
150
Complex permeability as
a function of frequency.
handbook, halfpage
3C96
2013 Jul 31
250
CBW447
Fig.2
's
10 3
5500
10000
50
3C96
's , ''s
UNIT
2 000 20%
handbook, halfpage
0
50
CBW573
10 4
handbook, halfpage
250
Initial permeability as a
function of temperature.
25
25
50
3C96
150
H (A/m)
96
250
Ferroxcube
Material specification
3C96
CBW440
8000
25 oC
100 oC
handbook, halfpage
CBW576
10 4
handbook, halfpage
3C96
3C96
rev
6000
10 3
4000
10 2
2000
100
Fig.4
200
300
B (mT)
10
400
Fig.5
CBW453
10 4
T = 100 C
kH
f
B
(kHz) (mT)
600
kHz
10 3
CBW472
3C96
Pv
(kW/m 3 )
200
(kW/m 3)
Reversible permeability as a
function of magnetic field strength.
800
kHz
100
kHz
500
Pv
3
H (A/m) 10
handbook, halfpage
3C96
10 2
10
Amplitude permeability as a
function of peak flux density.
25
400
100
200
200
100
25
100
200
100
10 2
200
10
1
Fig.6
2013 Jul 31
10
10 2
B (mT)
10 3
Fig.7
97
40
80
120
T (o C)
Ferroxcube
Material specification
3C98
3C98 SPECIFICATIONS
A low to medium frequency power material for use in
power and general purpose transformers at frequencies
up to 0.4 MHz.
CONDITIONS
VALUE
25 C; 10 kHz; 0.25 mT
5500
530
440
500
350
250
DC; 25 C
PV
's
10 3
''s
mT
10 2
kW/m3
TC
230
density
4850
kg/m3
3C98
's , ''s
UNIT
2 500 20%
ABW573
10 4
handbook, halfpage
10
10 1
Fig.1
10
f (MHz)
10 2
Complex permeability as
a function of frequency.
ABW447
10000
handbook, halfpage
3C98
i
ABW438
500
8000
25 oC
100 oC
handbook, halfpage
B
(mT)
400
6000
3C98
300
4000
200
2000
100
0
50
50
Fig.2
2013 Jul 31
150
T ( o C)
250
Initial permeability as a
function of temperature.
25
25
50
150
98
H (A/m)
250
Ferroxcube
Material specification
3C98
ABW440
8000
handbook, halfpage
25 C
100 oC
ABW576
10 4
handbook, halfpage
3C98
3C98
rev
6000
10 3
4000
10 2
2000
100
Fig.4
200
300
B (mT)
10
400
Amplitude permeability as a
function of peak flux density.
Fig.5
ABW453
10 4
100
400
200
10
1
2013 Jul 31
f
B
(kHz) (mT)
600
10 2
Fig.6
ABW472
3C98
Pv
(kW/m 3 )
kHz
10 3
Reversible permeability as a
function of magnetic field strength.
handbook, halfpage
50
400 0 kHz
kHz
200
kHz
Pv
(kW/m 3)
10
10 2
B (mT)
3
H (A/m) 10
800
3C98
T = 100 C
10 2
10
10 3
Fig.7
99
40
80
100
200
200
100
400
50
100
100
120
T (o C)
Ferroxcube
Material specification
3C98
PRODUCT
STATUS
DEFINITIONS
Preliminary
specification
Development
This data sheet contains preliminary data. Ferroxcube reserves the right to
make changes at any time without notice in order to improve design and
supply the best possible product.
Product specification
Production
This data sheet contains final specifications. Ferroxcube reserves the right
to make changes at any time without notice in order to improve design and
supply the best possible product.
DISCLAIMER
Life support applications
These products are not designed for use in life support appliances, devices, or systems
where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers
using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube
for any damages resulting from such application.
PRODUCT STATUS DEFINITIONS
STATUS
Prototype
INDICATION
DEFINITION
These are products that have been made as development samples for the purposes of
technical evaluation only. The data for these types is provisional and is subject to
change.
Design-in
Preferred
These products are recommended for use in current designs and are available via our
sales channels.
Support
These products are not recommended for new designs and may not be available
through all of our sales channels. Customers are advised to check for availability.
2013 Jul 31
100
Ferroxcube
Material specification
3D3
3D3 SPECIFICATIONS
A medium frequency filter and tuning material
optimized for frequencies from 0.2 up to 2 MHz.
SYMBOL
i
CONDITIONS
25 C; 10 kHz;
0.25 mT
25 C; 10 kHz;
1200 A/m
100 C; 10 kHz;
1200 A/m
25 C; 300 kHz;
0.25 mT
25 C; 1 MHz;
0.25 mT
25 C; 100 kHz;
1.5 to 3 mT
25 C; 10 kHz;
0.25 mT
25 to 70 C;
10 kHz; 0.25 mT
tan/i
B
DF
F
TC
density
DC; 25 C
VALUE
UNIT
3D3
's , ''s
750 20%
380
MBW003
10 4
handbook, halfpage
10 3
mT
's
310
''s
10 2
10 106
30 106
1.8 103
12
T1
10
10 1
(1.5 1) 106
K1
2
200
4 700
m
C
kg/m 3
Fig.1
MBW004
2000
handbook, halfpage
10
f (MHz)
10
Complex permeability as
a function of frequency.
500
MBW005
25oC
100oC
handbook, halfpage
3D3
106
B
(mT)
3D3
400
1500
300
1000
200
500
100
0
50
50
Fig.2
2013 Jul 31
150
T ( o C)
250
Initial permeability as a
function of temperature.
50
50
100
500
1000
H (A/m)
101
Ferroxcube
Material specification
3D3
MBW078
1000
f = 10 kHz
o
T=25 C
handbook, halfpage
3D3
750
0.1 s
0.2 s
500
0.5 s
1 s
250
2 s
100
200
300
B (mT)
400
2013 Jul 31
102
Ferroxcube
Material specification
3E25
3E25 SPECIFICATIONS
A medium permeability material mainly for use in
current compensated chokes in EMI-suppression
filters.
SYMBOL
CONDITIONS
VALUE
25 C; 10 kHz;
0.25 mT
6000 20%
25 C; 10 kHz;
1200 A/m
390
100 C; 10 kHz;
1200 A/m
220
25 C; 100 kHz;
0.25 mT
25 106
25 C; 300 kHz;
0.25 mT
200 106
DC; 25 C
0.5
tan/i
MBW026
10 5
handbook, halfpage
3E25
's , ''s
UNIT
10 4
's
mT
''s
10 3
10
10 2
10
125
density
4900
kg/m3
Fig.1
MBW029
20000
f (MHz)
10
Complex permeability as
a function of frequency.
MBW011
500
25oC
100oC
handbook, halfpage
3E25
TC
handbook, halfpage
B
(mT)
3E25
400
15000
300
10000
200
5000
100
0
50
50
Fig.2
2013 Jul 31
150
T ( o C)
250
Initial permeability as a
function of temperature.
25
25
50
150
103
H (A/m)
250
Ferroxcube
Material specification
3E25
MBW040
10 4
handbook, halfpage
MBW082
16000
3E25
f = 10 kHz
o
T=25 C
handbook, halfpage
p
rev
3E25
12000
10 3
8000
5 s
10 2
2 s
4000
1 s
0.5 s
10
1
Fig.4
2013 Jul 31
10
10 2
H (A/m) 10
Reversible permeability as a
function of magnetic field strength.
100
200
300
B (mT)
400
104
Ferroxcube
Material specification
3E26
3E26 SPECIFICATIONS
A medium permeability material mainly for use in
current compensated chokes in EMI-suppression
filters.
SYMBOL
CONDITIONS
VALUE
25 C; 10 kHz;
0.25 mT
7000 20%
25 C; 10 kHz;
1200 A/m
430
100 C; 10 kHz;
1200 A/m
300
tan/i
25 C; 100 kHz;
0.25 mT
20 106
DC; 25 C
CBW451
10 5
handbook, halfpage
3E26
's , ''s
UNIT
10 4
's
mT
''s
10 3
0.5
TC
155
density
4900
kg/m3
10
10 2
10
Fig.1
CBW452
20000
handbook, halfpage
f (MHz)
10
Complex permeability as
a function of frequency.
CBW450
500
25oC
100oC
handbook, halfpage
3E26
B
(mT)
3E26
400
15000
300
10000
200
5000
100
0
50
50
Fig.2
2013 Jul 31
150
T (oC)
250
Initial permeability as a
function of temperature.
25
25
50
150
H (A/m)
105
250
Ferroxcube
Material specification
3E26
CBW449
10 4
handbook, halfpage
3E26
rev
10 3
10 2
10
1
Fig.4
2013 Jul 31
10
10 2
H (A/m) 10
Reversible permeability as a
function of magnetic field strength.
106
Ferroxcube
Material specification
3E27
3E27 SPECIFICATIONS
A medium permeability material with low losses and a
relatively high Tc optimized for use in wideband
transformers as well as EMI-suppression filters.
SYMBOL
CONDITIONS
VALUE
25 C; 10 kHz;
0.25 mT
6000 20%
25 C; 10 kHz;
1200 A/m
430
100 C; 10 kHz;
1200 A/m
270
tan/i
25 C; 100 kHz;
0.25 mT
15 106
DC; 25 C
CBW335
105
handbook, halfpage
3E27
's , ''s
UNIT
104
's
mT
''s
103
0.5
TC
150
density
4800
kg/m3
102
102
101
Fig.1
CBW336
20000
handbook, halfpage
f (MHz)
10
Complex permeability as
a function of frequency.
CBW337
500
25 C
100 C
handbook, halfpage
3E27
B
(mT)
3E27
400
15000
300
10000
200
5000
100
0
50
50
Fig.2
2013 Jul 31
150
T (C)
0
25
250
Initial permeability as a
function of temperature.
25
50
150
H (A/m)
107
250
Ferroxcube
Material specification
3E27
CBW338
104
handbook, halfpage
CBW339
8000
handbook, halfpage
3E27
f = 10 kHz
T = 25 C
p
rev
3E27
6000
103
4000
2 s
102
0.2 s
2000
10
1
Fig.4
2013 Jul 31
10
102
H (A/m)
103
Reversible permeability as a
function of magnetic field strength.
0.1 s
100
200
1 s
0.5 s
300
B (mT)
400
108
Ferroxcube
Material specification
3E28
3E28 SPECIFICATIONS
A medium permeability material optimized for use in
wideband LAN transformers with a high DC-bias
current over a wide temperature range.
SYMBOL
CONDITIONS
VALUE
25 C; 10 kHz;
0.25 mT
4000 20%
25 C; 10 kHz;
1200 A/m
440
100 C; 10 kHz;
1200 A/m
280
tan/i
25 C; 100 kHz;
0.25 mT
5 106
DC; 25 C
3E28
's , ''s
UNIT
CBW445
10 5
handbook, halfpage
10 4
's
mT
''s
10 3
TC
145
density
4800
kg/m3
10
10 2
10
Fig.1
CBW448
10000
handbook, halfpage
6000
300
4000
200
2000
100
0
50
50
Fig.2
2013 Jul 31
150
T ( o C)
25oC
100oC
B
(mT)
400
250
Initial permeability as a
function of temperature.
f (MHz)
25
25
50
3E28
150
H (A/m)
109
10
CBW446
500
8000
Complex permeability as
a function of frequency.
handbook, halfpage
3E28
250
Ferroxcube
Material specification
3E28
CBW444
10 4
handbook, halfpage
3E28
rev
10 3
10 2
10
1
Fig.4
2013 Jul 31
10
10 2
H (A/m) 10
Reversible permeability as a
function of magnetic field strength.
110
Ferroxcube
Material specification
3E5
3E5 SPECIFICATIONS
A high permeability material optimized for use in
wideband transformers as well as EMI-suppression
filters.
SYMBOL
CONDITIONS
VALUE
25 C; 10 kHz;
0.25 mT
10 000 20%
25 C; 10 kHz;
1200 A/m
380
100 C; 10 kHz;
1200 A/m
230
25 C; 30 kHz;
0.25 mT
25 106
25 C; 100 kHz;
0.25 mT
75 106
tan/ i
25 C; 10 kHz;
1.5 to 3 mT
DC; 25 C
0.5
3E5
's , ''s
UNIT
MBW027
10 5
handbook, halfpage
10 4
's
mT
''s
10 3
10
10 2
10 3
10
f (MHz)
10
T1
m
TC
125
density
4 900
kg/m 3
Fig.1
MBW028
20000
handbook, halfpage
MBW012
500
25oC
100oC
handbook, halfpage
3E5
Complex permeability as
a function of frequency.
B
(mT)
3E5
400
15000
300
10000
200
5000
100
0
50
50
Fig.2
2013 Jul 31
150
T ( o C)
250
Initial permeability as a
function of temperature.
25
25
50
150
111
H (A/m)
250
Ferroxcube
Material specification
3E5
MBW041
10 4
handbook, halfpage
MBW081
16000
3E5
f = 10 kHz
o
T=25 C
handbook, halfpage
rev
3E5
12000
10 3
8000
10 2
4000
0.5 s
10
1
Fig.4
2013 Jul 31
10
10 2
3
H (A/m) 10
Reversible permeability as a
function of magnetic field strength.
100
2 s
5 s
1 s
200
300
B (mT)
400
112
Ferroxcube
Material specification
3E55
3E55 SPECIFICATIONS
A high permeability material optimized for a very low
Total Harmonic Distortion factor (THD/a) over the full
operating temperature range of DSL wideband
transformers.
SYMBOL
CONDITIONS
VALUE
25 C; 10 kHz;
0.25 mT
10 000 20%
25 C; 10 kHz;
1200 A/m
370
80 C; 10 kHz;
1200 A/m
220
25 C; 10 kHz;
0.25 mT
10 106
25 C; 30 kHz;
0.25 mT
30 106
25 C; 10 kHz;
1.5 to 3 mT
0.2 103
T1
DC; 25 C
tan/ i
3E55
's , ''s
UNIT
CBW433
10 5
handbook, halfpage
's
10 4
mT
''s
10 3
10
10 2
0.1
TC
100
density
5 000
kg/m 3
Fig.1
CBW434
20000
handbook, halfpage
f (MHz)
10
Complex permeability as
a function of frequency.
CBW435
500
25 oC
80 oC
handbook, halfpage
3E55
10
B
(mT)
3E55
400
15000
300
10000
200
5000
100
0
50
50
Fig.2
2013 Jul 31
150
T (oC)
250
Initial permeability as a
function of temperature.
25
25
50
150
H (A/m)
113
250
Ferroxcube
Material specification
3E55
MFW062
115
THD/a
(dB)
MFW071
-110
3E55
THD/a
(dB)
3E55
-115
120
-120
125
-125
130
-130
-135
135
20
40
80
T (oC)
MFW072
-110
3E55
-115
-120
-125
-130
-135
10
f (kHz)
100
2013 Jul 31
10
B (mT)
100
THD/a
(dB)
114
Ferroxcube
Material specification
3E6
3E6 SPECIFICATIONS
A high permeability material optimized for use in
wideband transformers as well as EMI-suppression
filters.
i
B
tan/ i
B
TC
density
CONDITIONS
VALUE(1)
25 C; 10 kHz;
0.25 mT
25 C; 10 kHz;
1200 A/m
100 C; 10 kHz;
1200 A/m
25 C; 10 kHz; 0.25 mT
25 C; 30 kHz; 0.25 mT
25 C; 10 kHz;
1.5 to 3 mT
DC; 25 C
12000 20%
390
10 4
's
mT
''s
10 3
10 106
30 106
1 103
T1
0.1
130
4 900
m
C
kg/m3
10
10 2
Note
MBW265
f (MHz)
10
Complex permeability as
a function of frequency.
MBW266
500
25 oC
100 oC
handbook, halfpage
3E6
10 1
Fig.1
40000
3E6
's , ''s
UNIT
220
handbook, halfpage
MBW264
10 5
handbook, halfpage
B
(mT)
3E6
400
30000
300
20000
200
10000
100
0
50
50
Fig.2
2013 Jul 31
150
T ( o C)
250
Initial permeability as a
function of temperature.
25
25
50
150
H (A/m)
115
250
Ferroxcube
Material specification
3E6
MBW267
10 5
handbook, halfpage
3E6
rev
10 4
10 3
10
Fig.4
2013 Jul 31
10
10 2
3
H (A/m) 10
Reversible permeability as a
function of magnetic field strength.
116
Ferroxcube
Material specification
3E7
3E7 SPECIFICATIONS
A high permeability material optimized for use in
wideband transformers where small size or a low
number of turns are important design parameters.
i
B
tan/i
B
TC
density
CONDITIONS
VALUE(1)
25 C; 10 kHz;
0.25 mT
25 C; 10 kHz;
1200 A/m
100 C; 10 kHz;
1200 A/m
25 C; 10 kHz; 0.25 mT
25 C; 30 kHz; 0.25 mT
25 C; 10 kHz;
1.5 to 3 mT
DC; 25 C
15000 20%
390
's , ''s
UNIT
's
mT
''s
10 3
10 106
30 106
1 103
T1
0.1
130
4900
m
C
kg/m3
10
10 2
Note
MBW202
f (MHz)
10
Complex permeability as
a function of frequency.
MBW203
500
25 oC
100 oC
handbook, halfpage
3E7
10
Fig.1
40000
3E7
10 4
220
handbook, halfpage
MBW201
10 5
handbook, halfpage
B
(mT)
3E7
400
30000
300
20000
200
10000
100
0
50
50
Fig.2
2013 Jul 31
150
T ( o C)
250
Initial permeability as a
function of temperature.
25
25
50
150
H (A/m)
117
250
Ferroxcube
Material specification
3E7
MBW204
10 5
handbook, halfpage
3E7
rev
10 4
10 3
10
Fig.4
2013 Jul 31
10
10 2
3
H (A/m) 10
Reversible permeability as a
function of magnetic field strength.
118
Ferroxcube
Material specification
3E8
3E8 SPECIFICATIONS
A high permeability material optimized for use in
wideband transformers and delay lines where small
size or a low number of turns are important design
parameters.
VALUE(1)
CONDITIONS
i
B
tan/ i
B
TC
density
25 C; 10 kHz;0.25 mT
25 C; 10 kHz;
1200 A/m
80 C; 10 kHz;
1200 A/m
25 C; 10 kHz; 0.25 mT
25 C; 30 kHz; 0.25 mT
25 C; 10 kHz;
1.5 to 3 mT
DC; 25 C
CBW461
10 5
handbook, halfpage
's , ''s
UNIT
3E8
's
10 4
18000 20%
380
mT
210
10 3
10 106
30 106
1 103
T1
0.1
100
5000
m
C
kg/m3
10
10 2
Note
10
Fig.1
f (MHz)
10
Complex permeability as
a function of frequency.
CBW463
40000
handbook, halfpage
3E8
CBW465
500
25 oC
80 oC
handbook, halfpage
B
(mT)
30000
3E8
400
20000
300
10000
200
100
0
50
50
150
T ( o C)
250
0
Fig.2
2013 Jul 31
Initial permeability as a
function of temperature.
25
25
50
150
H (A/m)
119
250
Ferroxcube
Material specification
3E8
CBW467
10 5
handbook, halfpage
3E8
rev
10 4
10 3
10
Fig.4
2013 Jul 31
10
10 2
3
H (A/m) 10
Reversible permeability as a
function of magnetic field strength.
120
Ferroxcube
Material specification
3E9
3E9 SPECIFICATIONS
A high permeability material optimized for small toroids
used in miniaturized wideband transformers and delay
lines.
i
B
tan/ i
B
TC
density
CONDITIONS
VALUE (1)
25 C; 10 kHz;
0.25 mT
25 C; 10 kHz;
1200 A/m
80 C; 10 kHz;
1200 A/m
25 C; 10 kHz; 0.25 mT
25 C; 30 kHz; 0.25 mT
25 C; 10 kHz;
1.5 to 3 mT
DC; 25 C
20 000 20%
MFW042
10 5
3E9
's , ''s
UNIT
's
10 4
380
mT
210
''s
10 3
10 106
50 106
1 10 3
T1
0.1
100
5 000
m
C
kg/m3
10
10 2
Note
Fig.1
MFW043
40000
handbook, halfpage
f (MHz)
10
Complex permeability as
a function of frequency.
MFW044
500
25 oC
80 oC
handbook, halfpage
B
(mT)
3E9
10
3E9
400
30000
300
20000
200
10000
100
0
50
50
Fig.2
2013 Jul 31
150
T ( o C)
250
Initial permeability as a
function of temperature.
25
25
50
150
H (A/m)
121
250
Ferroxcube
Material specification
3E9
MFW045
10 5
handbook, halfpage
3E9
rev
10 4
10 3
10
Fig.4
2013 Jul 31
10
10 2
H (A/m) 10
Reversible permeability as a
function of magnetic field strength.
122
Ferroxcube
Material specification
3F3
3F3 SPECIFICATIONS
A medium frequency power material for use in power
and general purpose transformers at frequencies of
0.2 - 0.5 MHz.
SYMBOL
CONDITIONS
VALUE
25 C; 10 kHz;
0.25 mT
2000 20%
100 C; 25 kHz;
200 mT
4000
25 C; 10 kHz;
1200 A/m
440
100 C; 10 kHz;
1200 A/m
370
80
150
DC; 25 C
PV
's , ''s
UNIT
mT
10 2
kW/m3
200
density
4750
kg/m3
10
10 1
3000
300
2000
200
1000
100
Fig.2
2013 Jul 31
150
T ( o C)
250
Initial permeability as a
function of temperature.
25
25
50
3F3
150
123
10 2
MBW015
B
(mT)
400
f (MHz)
25oC
100oC
handbook, halfpage
4000
10
Complex permeability as
a function of frequency.
500
3F3
Fig.1
CBW455
handbook, halfpage
50
's
''s
0
50
3F3
10 3
TC
5000
CBW481
10 4
handbook, halfpage
H (A/m)
250
Ferroxcube
Material specification
3F3
CBW443
8000
25 oC
100 oC
handbook, halfpage
3F3
CBW477
10 4
handbook, halfpage
3F3
6000
rev
10 3
4000
2000
10 2
100
200
300
B (mT)
400
10
Fig.4
Amplitude permeability as
function of peak flux density.
Fig.5
MBW048
10 4
handbook, halfpage
T = 100 oC
Reversible permeability as a
function of magnetic field strength.
CBW456
400
3F3
Pv
(kW/m 3 )
700
kHz
400
kH
z
200
kHz
100
kHz
f
B
(kHz) (mT)
300
kHz
10 3
3
H (A/m) 10
handbook, halfpage
3F3
Pv
(kW/m 3)
10 2
10
25
200
200
100
400
50
10 2
25
200
100
100
100
10
1
Fig.6
10
10 2
B (mT)
10
Fig.7
2013 Jul 31
124
40
80
120
T (o C)
Ferroxcube
Material specification
3 F31
3F31 SPECIFICATIONS
A medium frequency power material for use in power
and general purpose transformers at frequencies of 0.2
- 0.5 MHz.
SYMBOL
CONDITIONS
VALUE
25 C; 10 kHz; 0.25 mT
1800
20%
3800
520
420
PV
175
DC; 25 C
's , ''s
UNIT
3F31
's
10 3
''s
mT
10 2
kW/m3
80
ABW481
10 4
handbook, halfpage
TC
230
density
4750
kg/m3
10
10 1
Fig.1
10
f (MHz)
Complex permeability as
a function of frequency.
ABW455
5000
handbook, halfpage
3F31
25oC
100oC
500
4000
ABW015
handbook, halfpage
3F31
B
(mT)
400
3000
300
2000
200
1000
100
0
50
50
Fig.2
2013 Jul 31
150
T ( o C)
0
50
250
Initial permeability as a
function of temperature.
50
100
500
1000
H (A/m)
125
10 2
Ferroxcube
Material specification
3 F31
ABW443
8000
handbook, halfpage
25 C
100 oC
3F31
ABW477
10 4
handbook, halfpage
3F31
6000
rev
10 3
4000
2000
10 2
100
200
300
B (mT)
400
10
Fig.4
Amplitude permeability as
function of peak flux density.
10 2
10
Fig.5
H (A/m) 10
Reversible permeability as a
function of magnetic field strength.
ABW456
400
handbook, halfpage
10 4
handbook, halfpage
T = 100
3F31
Pv
(kW/m 3)
3F31
Pv
(kW/m 3 )
ABW048
f
B
(kHz) (mT)
Hz
kHz
200
0k
40
700
kHz
300
10 3
200
10 2
100
10
1
Fig.6
10
10 2
B (mT)
10
Fig.7
2013 Jul 31
126
40
80
T (o C)
500
50
200
100
400
50
120
Ferroxcube
Material specification
3 F31
PRODUCT
STATUS
DEFINITIONS
Preliminary
specification
Development
This data sheet contains preliminary data. Ferroxcube reserves the right to
make changes at any time without notice in order to improve design and
supply the best possible product.
Product specification
Production
This data sheet contains final specifications. Ferroxcube reserves the right
to make changes at any time without notice in order to improve design and
supply the best possible product.
DISCLAIMER
Life support applications
These products are not designed for use in life support appliances, devices, or systems
where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers
using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube
for any damages resulting from such application.
PRODUCT STATUS DEFINITIONS
STATUS
Prototype
IND ICATION
DEFINITION
These are products that have been made as development samples for the purposes of
technical evaluation only. The data for these types is provisional and is subject to
change.
Design-in
Preferred
These products are recommended for use in current designs and are available via our
sales channels.
Support
These products are not recommended for new designs and may not be available
through all of our sales channels. Customers are advised to check for availability.
2013 Jul 31
127
Ferroxcube
Material specification
3F35
3F35 SPECIFICATIONS
A medium to high frequency power material for use in
power and general purpose transformers at frequencies
of 0.5 - 1 MHz.
CONDITIONS
VALUE
25 C; 10 kHz;
0.25 mT
1 400 20%
100 C; 25 kHz;
200 mT
2400
25 C; 10 kHz;
1200 A/m
500
100 C; 10 kHz;
1200 A/m
420
60
90
700
DC; 25 C
Pv
10 3
mT
10 2
kW/m 3
10
240
density
4750
kg/m 3
10
10 1
500
400
3000
300
2000
200
1000
100
0
50
50
Fig.2
2013 Jul 31
150
T (C)
250
Initial permeability as a
function of temperature.
50
f (MHz)
50
100
3F35
500
1000
H (A/m)
128
10
CBW231
25oC
100oC
B
(mT)
4000
10
Complex permeability as
a function of frequency.
handbook, halfpage
3F35
Fig.1
CBW255
5000
handbook, halfpage
3F35
's , ''s
UNIT
TC
CBW230
10 4
handbook, halfpage
Ferroxcube
Material specification
3F35
CBW232
8000
25 oC
100 oC
handbook, halfpage
CBW233
10 4
handbook, halfpage
3F35
3F35
rev
6000
10 3
4000
10 2
2000
100
Fig.4
200
300
B (mT)
10
400
Amplitude permeability as
function of peak flux density.
Fig.5
CBW234
10 4
handbook, halfpage
T = 100 oC
Reversible permeability as a
function of magnetic field strength.
CBW235
1200
3F35
kH z
Pv
(kW/m3)
500
1M
Hz
(kW/m 3)
3
H (A/m) 10
handbook, halfpage
3F35
Pv
10 2
10
^
f
B
(kHz) (mT)
900
10 3
500
100
1000
30
500
50
600
10 2
300
10
1
Fig.6
2013 Jul 31
10
10 2
B (mT)
10 3
Fig.7
129
40
80
T (C)
120
Ferroxcube
Material specification
3 F36
3F36 SPECIFICATIONS
A medium to high frequency power material for use in
power and general purpose transformers at frequencies
of 0.5 - 1 MHz. Low power losses from 25 to 100 C.
Especially suited for broad temperature range
applications like automotive, lighting and mobile
handheld.
ABW230
10 4
handbook, halfpage
3F36
's , ''s
10 3
CONDITIONS
VALUE
25 C; 10 kHz; 0.25 mT
1 600 20%
2400
520
100 C; 10 kHz;
1200 A/m
420
90
700
700
DC; 25 C
12
Pv
UNIT
10 2
mT
kW/m3
10
10 1
230
density
4750
kg/m3
Fig.1
Complex permeability as
a function of frequency.
ABW255
3F36
f (MHz)
TC
handbook, halfpage
10
25oC
100oC
500
ABW231
handbook, halfpage
3F36
B
(mT)
2000
400
300
1000
200
100
50
50
Fig.2
2013 Jul 31
150
T (C)
0
50
250
Initial permeability as a
function of temperature.
50
100
500
1000
H (A/m)
130
10 2
Ferroxcube
Material specification
3 F36
ABW232
8000
handbook, halfpage
25 C
100 oC
ABW233
10 4
handbook, halfpage
3F36
3F36
rev
6000
10 3
4000
10 2
2000
100
Fig.4
200
300
B (mT)
10
400
Amplitude permeability as
function of peak flux density.
Fig.5
10 2
10
H (A/m) 10
Reversible permeability as a
function of magnetic field strength.
ABW234
1M
Hz
kHz
10 4
handbook, halfpage
T = 100 oC
(kW/m 3)
ABW235
1200
3F36
handbook, halfpage
500
Pv
3F36
Pv
(kW/m3)
^
f
B
(kHz) (mT)
900
10 3
500
100
600
10 2
300
10
1
Fig.6
2013 Jul 31
10
10 2
B (mT)
10 3
Fig.7
131
40
80
T (C)
1000
30
500
50
120
Ferroxcube
Material specification
3 F36
PRODUCT
STATUS
DEFINITIONS
Preliminary
specification
Development
This data sheet contains preliminary data. Ferroxcube reserves the right to
make changes at any time without notice in order to improve design and
supply the best possible product.
Product specification
Production
This data sheet contains final specifications. Ferroxcube reserves the right
to make changes at any time without notice in order to improve design and
supply the best possible product.
DISCLAIMER
Life support applications
These products are not designed for use in life support appliances, devices, or systems
where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers
using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube
for any damages resulting from such application.
PRODUCT STATUS DEFINITIONS
STATUS
Prototype
IND ICATION
DEFINITION
These are products that have been made as development samples for the purposes of
technical evaluation only. The data for these types is provisional and is subject to
change.
Design-in
Preferred
These products are recommended for use in current designs and are available via our
sales channels.
Support
These products are not recommended for new designs and may not be available
through all of our sales channels. Customers are advised to check for availability.
2013 Jul 31
132
Ferroxcube
Material specification
3F4
3F4 SPECIFICATIONS
A high frequency power material for use in power and
general purpose transformers at frequencies of
1 - 2 MHz.
SYMBOL
CONDITIONS
VALUE
25 C; 10 kHz;
0.25 mT
900 20%
100 C; 25 kHz;
200 mT
1700
25 C; 10 kHz;
1200 A/m
410
100 C; 10 kHz;
1200 A/m
350
100 C; 1 MHz;
30 mT
130
100 C; 3 MHz;
10 mT
220
PV
DC; 25 C
3F4
's , ''s
UNIT
10 3
's
''s
mT
10 2
kW/m3
10
TC
220
density
4700
kg/m3
10
10 1
handbook, halfpage
10
10
f (MHz)
Complex permeability as
a function of frequency.
500
MBW017
25oC
100oC
handbook, halfpage
3F4
Fig.1
MBW034
2000
MBW025
10 4
handbook, halfpage
B
(mT)
3F4
400
1500
300
1000
200
500
100
0
50
50
Fig.2
2013 Jul 31
150
T ( o C)
250
Initial permeability as a
function of temperature.
50
50
100
500
133
H (A/m)
1000
Ferroxcube
Material specification
3F4
MBW046
2000
25 oC
100 oC
handbook, halfpage
MBW035
10 4
handbook, halfpage
3F4
3F4
rev
1500
10 3
1000
10 2
500
Fig.4
100
200
300
B (mT)
10
400
Amplitude permeability as
function of peak flux density.
Fig.5
MBW047
10 4
handbook, halfpage
T = 100 oC
MBW056
3F4
Pv
(kW/m 3 )
z
1 MH
f
B
(kHz) (mT)
300
25 k
Hz
10 3
Reversible permeability as a
function of magnetic field strength.
handbook, halfpage
40
2 0 0 0 kHz
100 kHz
kHz
3M
Hz
2M
Hz
(kW/m 3)
200
10 2
100
10
1
Fig.6
2013 Jul 31
10
10 2
B (mT)
3
H (A/m) 10
400
3F4
Pv
10 2
10
10
Fig.7
134
40
80
3000
10
500
50
1000
30
1000
25
120
T (o C)
Ferroxcube
Material specification
3F45
3F45 SPECIFICATIONS
A high frequency power material for use in power and
general purpose transformers at frequencies of
1 - 2 MHz.
SYMBOL
CONDITIONS
VALUE
25 C; 10 kHz;
0.25 mT
900 20%
100 C; 25 kHz;
200 mT
1700
25 C; 10 kHz;
1200 A/m
420
100 C; 10 kHz;
1200 A/m
370
100 C; 1 MHz;
30 mT
80
100 C; 1 MHz;
50 mT
300
100 C; 3 MHz;
10 mT
150
DC; 25 C
10
PV
10 3
mT
10 2
kW/m3
10
10 1
4800
kg/m3
MFW016
2500
500
400
1500
300
1000
200
500
100
Fig.2
2013 Jul 31
250
T ( C)
350
Initial permeability as a
function of temperature.
50
f (MHz)
50
100
3F45
500
H (A/m)
135
10 2
MFW017
25oC
100oC
B
(mT)
2000
10
Complex permeability as
a function of frequency.
handbook, halfpage
3F45
Fig.1
300
150
's
''s
TC
50
3F45
's , ''s
UNIT
density
0
50
MFW015
10 4
handbook, halfpage
1000
Ferroxcube
Material specification
3F45
MFW019
10 4
handbook, halfpage
3F45
MFP115
2000
25 oC
100 oC
handbook, halfpage
rev
3F45
10 3
1500
1000
10 2
500
10
100
Fig.4
200
300
B (mT)
Fig.5
MFW020
MFW021
3F45
Pv
(kW/m 3 )
1 MH
500 k z
Hz
2M
Hz
Reversible permeability as a
function of magnetic field strength.
800
3F45
Pv
(kW/m 3)
H (A/m) 10
400
Amplitude permeability as
function of peak flux density.
10 4
handbook, halfpage
T = 100 oC
10 2
10
1
0
f
B
(MHz) (mT)
600
10 3
0.5
1
400
50
50
10 2
200
10
1
Fig.6
2013 Jul 31
10
10 2
B (mT)
10
Fig.7
136
40
80
120
T (o C)
Ferroxcube
Material specification
3F5
3F5 SPECIFICATIONS
A very high frequency power material for use in power
and general purpose transformers optimized for
frequencies of 2 - 4 MHz.
SYMBOL
CONDITIONS
VALUE
25 C; 10 kHz;
0.25 mT
650 20%
100 C; 25 kHz;
200 mT
1000
25 C; 10 kHz;
1200 A/m
380
100 C; 10 kHz;
1200 A/m
340
100 C; 3 MHz;
10 mT
100
100 C; 3 MHz;
30 mT
900
PV
DC; 25 C
10 3
's
''s
mT
10 2
kW/m3
10
300
density
4750
kg/m3
10
10 1
1500
300
1000
200
500
100
Fig.2
2013 Jul 31
250
T ( C)
350
Initial permeability as a
function of temperature.
50
50
100
3F5
500
137
10 2
MFW024
25oC
100oC
B
(mT)
400
f (MHz)
Complex permeability as
a function of frequency.
500
2000
150
10
handbook, halfpage
3F5
Fig.1
MFW023
2500
50
3F5
's , ''s
UNIT
TC
0
50
MFW022
10 4
handbook, halfpage
H (A/m)
1000
Ferroxcube
Material specification
3F5
25 C
100 oC
MFW026
10 4
MFW025
2000
handbook, halfpage
3F5
3F5
rev
1500
10 3
1000
10 2
500
10
0
100
Fig.4
200
300
B (mT)
Amplitude permeability as
function of peak flux density.
Fig.5
MFW027
10 4
handbook, halfpage
T = 100 oC
MFW028
3F5
3M
Hz
2M
Hz
1 MH
z
Pv
(kW/m 3 )
f
B
(MHz) (mT)
1200
800
10 2
400
Fig.6
2013 Jul 31
10
10 2
B (mT)
10
Fig.7
138
Reversible permeability as a
function of magnetic field strength.
10 3
10
H (A/m) 10
1600
3F5
Pv
(kW/m 3)
10 2
10
400
40
80
30
30
20
10
120
T (o C)
Ferroxcube
Material specification
3H3
3H3 SPECIFICATIONS
A low frequency filter material optimized for
frequencies up to 0.2 MHz.
CONDITIONS
i
B
25 C; 10 kHz; 0.25 mT
25 C; 10 kHz;
1200 A/ m
100 C; 10 kHz;
1200 A/ m
25 C; 0.25 mT; 30 kHz
25 C; 0.25 mT; 100 kHz
25 C; 100 kHz;
1.5 to 3 mT
0.25 mT; 10 kHz: 25 C
40 C
10 kHz; 0.25 mT;
5 to 25 C
25 to 55 C
25 to 70 C
DC; 25 C
tan/i
B
DF
F
TC
density
VALUE
10 3
mT
''s
1.6 106
2.5 106
0.6 103
10 2
T1
3 106
3 106
10
10 1
Fig.1
10
f (MHz)
10
B
(mT)
400
3000
300
2000
200
1000
100
T ( o C)
MBW276
25 oC
100 oC
handbook, halfpage
4000
150
Complex permeability as
a function of frequency.
500
3H3
2013 Jul 31
K1
MBW275
Fig.2
's
270
5000
50
3H3
's , ''s
UNIT
2000 20%
360
handbook, halfpage
0
50
MBW274
10 4
handbook, halfpage
250
Initial permeability as a
function of temperature.
25
25
50
3H3
150
H (A/m)
139
250
Ferroxcube
Soft Ferrites
2013 Jul 31
140
Ferroxcube
Material specification
3R1
3R1 SPECIFICATIONS
MnZn ferrite with a nearly rectangular hysteresis loop
for use in magnetic regulators/amplifiers.
SYMBOL
i
CONDITIONS
25 C; 10 kHz;
0.25 mT
25 C; 10 kHz;
1200 A/m
100 C; 10 kHz;
1200 A/m
from 1 kA/m;
25 C
from 1 kA/m;
100 C
from 1 kA/m;
25 C
from 1 kA/m;
100 C
DC; 25 C
Br
Hc
TC
density
VALUE
UNIT
10 3
mT
''s
310
10 2
mT
220
52
10
10 1
A/m
103
230
4 700
m
C
kg/m3
Fig.1
MBW062
500
10
f (MHz)
400
3000
300
2000
200
1000
100
150
T ( o C)
250
Initial permeability as a
function of temperature.
50
MBW018
25oC
100oC
B
(mT)
4000
2013 Jul 31
10
Complex permeability as
a function of frequency.
handbook, halfpage
3R1
Fig.2
23
5000
50
's
340
handbook, halfpage
0
50
3R1
's , ''s
800 20%
410
MBW061
10 4
handbook, halfpage
50
100
3R1
500
H (A/m)
141
1000
Ferroxcube
Material specification
3R1
MBW001
10 4
handbook, halfpage
Pv
3R1
handbook, halfpage
Pv
(kW/m 3 )
400 kHz
(kW/m 3)
MBW002
800
3R1
1 MHz
100 kHz
f
B
(kHz) (mT)
600
10 3
100
100
30
200
10
200
25 kHz
400
10 kHz
10 2
200
10
1
Fig.4
10
10 2
B (mT)
10
Fig.5
Remark:
When 3R1 ring cores are driven exactly at their natural
mechanical resonant frequencies a magneto-elastic
resonance will occur. With large flux excursions and no
mechanical damping, amplitudes can become so high that
the maximum tensile stress of the ferrite is exceeded.
Cracks or even breakage of the ring core could be the
result. It is advised not to drive the toroidal cores at their
radial resonant frequencies or even subharmonics (e.g.
half this resonant frequency).
Resonant frequencies can be calculated for any ring core
with the following simple formula:
5700
fr = ---------------------------- kHz
D o + D i
----------------- 2
where:
f = radial resonant frequency (kHz)
Do = outside diameter (mm)
Di = inside diameter (mm).
2013 Jul 31
142
40
80
120
T (o C)
Ferroxcube
Material specification
3S1
3S1 SPECIFICATIONS
A low frequency EMI-suppression material specified on
impedance and optimized for frequencies up to
30 MHz.
SYMBOL
i
CONDITIONS
25 C; 10 kHz;
0.25 mT
25 C; 10 kHz;
1200 A/m
100 C; 10 kHz;
1200 A/m
25 C; 1 MHz
25 C; 10 MHz
DC; 25 C
Z(1)
TC
density
VALUE
MBW268
10 5
handbook, halfpage
3S1
's , ''s
UNIT
4000
10 4
400
's
mT
230
''s
10 3
30
60
1
125
4900
m
C
kg/m3
10
10 2
10 1
f (MHz)
10
Note
1. Measured on a bead 5 2 10 mm.
Fig.1
MBW269
20000
handbook, halfpage
MBW270
500
25 oC
100 oC
handbook, halfpage
3S1
Complex permeability as
a function of frequency.
B
(mT)
3S1
400
15000
300
10000
200
5000
100
0
50
50
Fig.2
2013 Jul 31
150
T ( o C)
250
Initial permeability as a
function of temperature.
25
25
50
150
H (A/m)
143
250
Ferroxcube
Material specification
3S1
MBW218
150
3S1
handbook, halfpage
Z
()
100
50
10
102
f (MHz)
103
2013 Jul 31
144
Ferroxcube
Material specification
3S3
3S3 SPECIFICATIONS
This wideband EMI-suppression material is specified
on impedance and optimized for frequencies from 30
to 1000 MHz in applications with high bias currents at
elevated temperatures (e.g. rods for chokes in
commutation motors).
SYMBOL
i
CONDITIONS
25 C; 10 kHz;
0.25 mT
25 C; 10 kHz;
1200 A/m
100 C; 10 kHz;
1200 A/m
25 C; 30 MHz
25 C; 100 MHz
25 C; 300 MHz
DC; 25 C
Z(1)
TC
density
VALUE
3S3
's , ''s
10 3
UNIT
's
350
320
MBW196
10 4
handbook, halfpage
mT
''s
10 2
270
25
60
100
104
225
4800
10
10 1
Fig.1
MBW192
B
(mT)
800
400
600
300
400
200
200
100
Fig.2
2013 Jul 31
150
T (oC)
250
Initial permeability as a
function of temperature.
50
MBW198
25oC
100oC
handbook, halfpage
50
10
Complex permeability as
a function of frequency.
500
3S3
handbook, halfpage
0
50
f (MHz)
m
C
kg/m3
Note
1000
10
50
100
3S3
500
1000
H (A/m)
145
Ferroxcube
Material specification
3S3
MBW219
150
3S3
handbook, halfpage
Z
()
100
50
10
102
f (MHz)
103
2013 Jul 31
146
Ferroxcube
Material specification
3S4
3S4 SPECIFICATIONS
Wideband EMI-suppression material specified on
impedance and optimized for frequencies from 10 to
300 MHz.
SYMBOL
i
CONDITIONS
25 C; 10 kHz;
0.25 mT
25 C; 10 kHz;
1200 A/m
100 C; 10 kHz;
1200 A/m
25 C; 3 MHz
25 C; 30 MHz
25 C; 100 MHz
25 C; 300 MHz
DC; 25 C
Z(1)
TC
density
VALUE
1700
10 3
's
''s
mT
170
10 2
25
60
80
90
103
110
4800
10
10 1
Fig.1
MBW191
5000
500
400
3000
300
2000
200
1000
100
50
Fig.2
2013 Jul 31
150
T (oC)
250
Initial permeability as a
function of temperature.
50
f (MHz)
50
100
3S4
500
1000
H (A/m)
147
10
MBW199
25oC
100oC
B
(mT)
4000
0
50
10
Complex permeability as
a function of frequency.
handbook, halfpage
3S4
m
C
kg/m3
Note
handbook, halfpage
3S4
's , ''s
UNIT
320
MBW195
10 4
handbook, halfpage
Ferroxcube
Material specification
3S4
MBW221
150
3S4
handbook, halfpage
Z
()
100
50
10
102
f (MHz)
103
2013 Jul 31
148
Ferroxcube
Material specification
3S5
3S5 SPECIFICATIONS
A low frequency EMI-suppression material specified on
impedance and optimized for frequencies up to
30 MHz in applications with high bias currents at
elevated temperatures (e.g. automotive and industrial).
SYMBOL
i
CONDITIONS
VALUE
UNIT
Z(1)
545
100 C; 10 kHz;
1200 A/m
435
25 C; 1 MHz
20
25 C; 10 MHz
40
DC; 25 C
10
mT
's
10 3
''s
10 2
TC
255
density
4800
kg/m3
1.
3S5
's , ''s
MFP069
10 4
10
10 1
Fig.1
3S5
o
25 C
o
100 C
rev
f (MHz)
10
Complex permeability as
a function of frequency.
MFP071
600
B
(mT)
500
MFP070
10 4
10
3S5
25 C
100 oC
400
10 3
300
10 2
200
100
10
1
Fig.2
2013 Jul 31
10
10 2
H (A/m) 10
Reversible permeability as a
function of magnetic field strength.
25
25
50
400
149
800
1200
H (A/m)
Ferroxcube
Material specification
3S5
MFP072
150
3S5
Z
()
100
50
Fig.4
2013 Jul 31
10
102
f (MHz)
103
150
Ferroxcube
Material specification
4A11
4A11 SPECIFICATIONS
Medium permeability NiZn ferrite for use in wideband
EMI-suppression (30 - 1000 MHz) as well as RF
wideband and balun transformers.
SYMBOL
i
CONDITIONS
25 C; 10 kHz;
0.25 mT
25 C; 10 kHz;
1200 A/m
100 C; 10 kHz;
1200 A/m
25 C; 1 MHz;
0.25 mT
25 C; 3 MHz;
0.25 mT
DC; 25 C
tan/ i
TC
density
VALUE
MBW309
10 4
4A11
's , ''s
UNIT
850 20%
's
10 3
340
mT
''s
230
10 2
100 106
1 000 106
105
125
5 100
10
10 1
m
C
kg/m3
Fig.1
B
(mT)
4A11
10 2
MBW311
25 oC
100 oC
handbook, halfpage
f (MHz)
Complex permeability as
a function of frequency.
500
MBW310
2000
10
4A11
400
1500
300
1000
200
500
100
0
50
50
Fig.2
2013 Jul 31
150
T ( o C)
250
Initial permeability as a
function of temperature.
50
50
100
500
1000
H (A/m)
151
Ferroxcube
Material specification
4A15
4A15 SPECIFICATIONS
High permeability NiZn ferrite for use in wideband
EMI-suppression (10 - 300 MHz) as well as RF
wideband and balun transformers.
SYMBOL
i
B
tan/ i
TC
density
CONDITIONS
25 C; 10 kHz;
0.25 mT
25 C; 10 kHz;
1200 A/m
100 C; 10 kHz;
1200 A/m
25 C; 1 MHz;
0.25 mT
25 C; 3 MHz;
0.25 mT
DC; 25 C
VALUE
MBW314
10 4
handbook, halfpage
4A15
's , ''s
UNIT
's
1200 20%
10 3
350
mT
''s
230
10 2
300 106
1500 106
105
125
5100
10
10 1
m
C
kg/m3
Fig.1
MBW313
2000
handbook, halfpage
f (MHz)
10
Complex permeability as
a function of frequency.
MBW312
500
25 oC
100 oC
handbook, halfpage
4A15
10
B
(mT)
4A15
400
1500
300
1000
200
500
100
0
50
50
Fig.2
2013 Jul 31
150
T ( o C)
250
Initial permeability as a
function of temperature.
50
50
100
500
1000
H (A/m)
152
Ferroxcube
Material specification
4A20
4A20 SPECIFICATIONS
High permeability NiZn ferrite for use in wideband
EMI-suppression (10 - 300 MHz) as well as RF
wideband and balun transformers.
SYMBOL
CONDITIONS
VALUE
25 C; 10 kHz;
0.25 mT
2000 20 %
25 C; 10 kHz;
1200 A/m
260
80 C; 10 kHz;
1200 A/m
150
DC; 25 C
105
MFP121
10 4
handbook, halfpage
UNIT
's
's , ''s
mT
4A20
10 3
''s
TC
100
density
5 000
kg/m 3
10 2
10
10 1
Fig.1
MFP122
5000
handbook, halfpage
3000
300
2000
200
1000
100
0
50
50
Fig.2
2013 Jul 31
150
T ( o C)
25 oC
80 oC
B
(mT)
400
250
Initial permeability as a
function of temperature.
25
Fig.3
153
10
MFP123
500
4000
f (MHz)
Complex permeability as
a function of frequency.
handbook, halfpage
4A20
10
25
50
4A20
150
H (A/m)
250
Ferroxcube
Material specification
4B1
4B1 SPECIFICATIONS
Medium permeability NiZn ferrite for use in wideband
EMI-suppression (30 - 1000 MHz) as well as RF
tuning, wideband and balun transformers.
SYMBOL
i
B
tan/ i
TC
density
CONDITIONS
VALUE
25 C; 10 kHz;
0.25 mT
25 C; 10 kHz;
3000 A/m
100 C; 10 kHz;
3000 A/m
25 C; 1 MHz;
0.25 mT
25 C; 3 MHz;
0.25 mT
DC; 25 C
250 20%
360
MBW290
10 3
handbook, halfpage
UNIT
's
's , ''s
mT
4B1
10
310
''s
90 106
10
300 106
105
250
4600
m
C
kg/m3
1
1
Fig.1
MBW291
500
B
(mT)
400
400
300
300
200
200
100
100
0
50
Fig.2
2013 Jul 31
100
300
T ( o C)
0
100
500
Initial permeability as a
function of temperature.
100
200
4B1
1000
2000
H (A/m)
154
103
MBW292
25 oC
100 oC
handbook, halfpage
f (MHz)
Complex permeability as
a function of frequency.
500
4B1
handbook, halfpage
102
10
Ferroxcube
Material specification
4B2
4B2 SPECIFICATIONS
Medium permeability NiZn ferrite for use in RF tuning,
especially antenna rods in RFID transponders in
automotive applications, and wideband and balun
transformers.
SYMBOL
CONDITIONS
25 C; 10 kHz;
0.25 mT
25 C; 10 kHz;
3000 A/m
100 C; 10 kHz;
3000 A/m
25 C; 3 MHz;
0.25 mT
i
B
tan/i
F
TC
density
DC; 25 C
VALUE
UNIT
10
mT
310
''s
10
300 106
(1 4) 106
(1 4) 106
(2.5 4) 106
(2 4) 106
(0.5 4) 106
105
335
4600
K1
1
1
B
(mT)
400
400
300
300
200
200
100
100
Fig.2
2013 Jul 31
100
300
T ( o C)
0
100
500
Initial permeability as a
function of temperature.
100
200
4B2
1000
2000
H (A/m)
155
103
MFP118
25 oC
100 oC
handbook, halfpage
f (MHz)
Complex permeability as
a function of frequency.
500
4B2
102
10
Fig.1
m
C
kg/m3
MFP117
500
handbook, halfpage
0
50
4B2
's
's , ''s
250 20 %
360
MFP116
10 3
handbook, halfpage
Ferroxcube
Material specification
4B3
4B3 SPECIFICATIONS
Medium permeability specialty NiZn ferrite only used in
large toroids and machined products mainly for
scientific particle accelerators operating at frequencies
< 10 MHz.
SYMBOL
CONDITIONS
VALUE
25 C; 10 kHz;
0.25 mT
25 C; 10 kHz;
3000 A/m
100 C; 10 kHz;
3000 A/m
DC; 25 C
i
B
TC
density
UNIT
10
4B3
's
's , ''s
300 20%
420
MBW433
10 3
handbook, halfpage
''s
mT
10
350
105
250
5000
m
C
kg/m3
1
1
Fig.1
MBW434
2500
B
(mT)
2000
400
1500
300
1000
200
500
100
0
50
Fig.2
2013 Jul 31
100
300
T ( o C)
0
100
500
Initial permeability as a
function of temperature.
100
200
4B3
1000
2000
H (A/m)
156
10
MBW435
25 oC
100 oC
handbook, halfpage
f (MHz)
Complex permeability as
a function of frequency.
500
4B3
handbook, halfpage
102
10
Ferroxcube
Material specification
4C65
4C65 SPECIFICATIONS
Low permeability NiZn ferrite for use in RF tuning,
wideband and balun transformers.
SYMBOL
i
CONDITIONS
25 C; 10 kHz;
0.25 mT
25 C; 10 kHz;
3000 A/m
100 C; 10 kHz;
3000 A/m
25 C; 3 MHz;
0.25 mT
25 C; 10 MHz;
0.25 mT
DC; 25 C
tan/ i
TC
density
VALUE
UNIT
's , ''s
125 20%
380
MBW074
10 3
handbook, halfpage
's
10
mT
4C65
340
''s
10
80 106
130 106
105
350
4500
m
C
kg/m3
Fig.1
MBW076
500
B
(mT)
400
400
300
300
200
200
100
100
0
50
100
Fig.2
2013 Jul 31
300
T ( o C)
0
200
500
Initial permeability as a
function of temperature.
200
400
4C65
2000
4000
H (A/m)
157
10
MBW075
25oC
100oC
handbook, halfpage
f (MHz)
Complex permeability as
a function of frequency.
500
4C65
handbook, halfpage
102
10
Ferroxcube
Material specification
4C65
MBW091
10 3
handbook, halfpage
MBW080
200
4C65
handbook, halfpage
p
rev
4C65
f = 10 kHz
T=25 oC
150
10 2
0.1 s
0.2 s
100
2 s
0.5 s
1 s
10
50
10
Fig.4
2013 Jul 31
10 2
10 3
4
H (A/m) 10
Reversible permeability as a
function of magnetic field strength.
50
100
150
B (mT)
200
158
Ferroxcube
Material specification
4D2
4D2 SPECIFICATIONS
Low permeability NiZn ferrite for use in RF tuning,
wideband and balun transformers.
SYMBOL
i
CONDITIONS
25 C; 10 kHz;
0.25 mT
25 C; 10 kHz;
10 kA/m
100 C; 10 kHz;
10 kA/m
25 C; 10 MHz;
0.25 mT
25 C; 30 MHz;
0.25 mT
DC, 25 C
tan/ i
TC
density
VALUE
UNIT
4D2
's , ''s
60 20%
250
MBW300
10 3
handbook, halfpage
10
mT
's
''s
230
10
100 106
600 106
105
400
4200
m
C
kg/m3
Fig.1
MBW301
100
B
(mT)
80
400
60
300
40
200
20
100
0
50
Fig.2
2013 Jul 31
100
300
T ( o C)
0
400
500
Initial permeability as a
function of temperature.
400
800
4D2
4000
8000
H (A/m)
159
10
MBW302
25 oC
100 oC
handbook, halfpage
f (MHz)
Complex permeability as
a function of frequency.
500
4D2
handbook, halfpage
102
10
Ferroxcube
Material specification
4E1
4E1 SPECIFICATIONS
Low permeability NiZn ferrite for use in RF tuning,
wideband and balun transformers.
SYMBOL
i
CONDITIONS
25 C; 10 kHz;
0.25 mT
25 C; 10 kHz;
20 kA/m
100 C; 10 kHz;
20 kA/m
25 C; 10 MHz;
0.25 mT
25 C; 30 MHz;
0.25 mT
DC; 25 C
tan/ i
TC
density
VALUE
UNIT
4E1
's , ''s
15 20%
220
MBW303
10 3
handbook, halfpage
10
mT
210
's
10
300 106
''s
350 106
105
500
3700
m
C
kg/m3
Fig.1
MBW304
50
B
(mT)
40
200
30
150
20
100
10
50
0
50
Fig.2
2013 Jul 31
100
300
T ( o C)
0
1000
500
Initial permeability as a
function of temperature.
1000
2000
4E1
10000
20000
H (A/m)
160
10
Complex permeability as
a function of frequency.
25 oC
100 oC
handbook, halfpage
f (MHz)
MBW305
250
4E1
handbook, halfpage
102
10
Ferroxcube
Material specification
4E2
4E2 SPECIFICATIONS
Low permeability specialty NiZn ferrite only used in
large toroids and machined products mainly for
scientific particle accelerators operating at frequencies
up to 100 MHz..
SYMBOL
CONDITIONS
25 C; 10 kHz;
0.25 mT
25 C; 10 kHz;
10 kA/m
100 C; 10 kHz;
10 kA/m
DC, 25 C
i
B
TC
density
VALUE
4E2
's , ''s
UNIT
10
25 20%
350
MBW436
10 3
handbook, halfpage
''s
's
mT
10
310
105
400
4000
m
C
kg/m3
1
1
Fig.1
MBW437
100
B
(mT)
80
400
60
300
40
200
20
100
0
50
Fig.2
2013 Jul 31
100
300
T ( o C)
0
400
500
Initial permeability as a
function of temperature.
400
800
4E2
4000
8000
H (A/m)
161
10
MBW445
25 oC
100 oC
handbook, halfpage
f (MHz)
Complex permeability as
a function of frequency.
500
4E2
handbook, halfpage
102
10
Ferroxcube
Soft Ferrites
2013 Jul 31
162
Ferroxcube
Material specification
4F1
4F1 SPECIFICATIONS
A very high frequency NiZn power material for use in
power and general purpose transformers optimized for
frequencies of 4 - 10 MHz.
SYMBOL
i
CONDITIONS
25 C; 10 kHz;
0.25 mT
100 C; 25 kHz;
200 mT
25 C; 10 kHz;
3000 A/m
100 C; 10 kHz;
3000 A/m
100 C; 3 MHz;
10 mT
100 C; 10 MHz;
5 mT
DC; 25 C
a
B
PV
TC
density
VALUE
10
''s
320
mT
10
260
kW/m3
200
1
1
200
105
260
4 600
m
C
kg/m3
MBW294
300
300
200
200
100
100
Fig.2
2013 Jul 31
300
T ( o C)
25 oC
100 oC
B
(mT)
400
0
100
500
Initial permeability as a
function of temperature.
100
200
4F1
1000
2000
H (A/m)
163
10
MBW295
500
400
f (MHz)
Complex permeability as
a function of frequency.
handbook, halfpage
102
10
Fig.1
4F1
100
's
300
500
4F1
's , ''s
UNIT
80
handbook, halfpage
0
50
MBW293
10 3
handbook, halfpage
Ferroxcube
Material specification
4F1
MBW296
800
25 oC
100 oC
handbook, halfpage
MBW297
10 3
handbook, halfpage
4F1
4F1
rev
600
10 2
400
10
200
100
Fig.4
200
300
Fig.5
MBW298
10 3
Reversible permeability as a
function of magnetic field strength.
MBW299
4F1
handbook, halfpage
5M
Hz
3M
Hz
Pv
(kW/m 3 )
f
B
(MHz) (mT)
600
10 3
400
10 2
200
10
1
Fig.6
2013 Jul 31
10
10 2
B (mT)
4
H (A/m) 10
800
4F1
10
MH
z
10
10
Amplitude permeability as
function of peak flux density.
10 4
handbook, halfpage
T = 100 oC
Pv
(kW/m 3)
B (mT)
400
10 3
Fig.7
164
40
80
10
7.5
10
10
10
120
T (o C)
Ferroxcube
Material specification
4M2
4M2 SPECIFICATIONS
Low permeability specialty NiZn ferrite only used in
large toroids and machined products mainly for
scientific particle accelerators operating at frequencies
up to 10 MHz.
SYMBOL
CONDITIONS
25 C; 10 kHz;
0.25 mT
25 C; 10 kHz;
3000 A/m
100 C; 10 kHz;
3000 A/m
DC; 25 C
i
B
TC
density
VALUE
's , ''s
UNIT
10
140 20%
310
MBW446
10 3
handbook, halfpage
4M2
's
''s
mT
10
270
105
200
5 000
m
C
kg/m3
1
1
Fig.1
MBW447
500
B
(mT)
400
400
300
300
200
200
100
100
0
50
50
Fig.2
2013 Jul 31
150
T (oC)
0
100
250
Initial permeability as a
function of temperature.
100
200
4M2
1000
2000
H (A/m)
165
10
MBW448
25 oC
100 oC
handbook, halfpage
f (MHz)
Complex permeability as
a function of frequency.
500
4M2
handbook, halfpage
102
10
Ferroxcube
Soft Ferrites
2013 Jul 31
166
Ferroxcube
Material specification
4S2
4S2 SPECIFICATIONS
Wideband EMI-suppression material specified on
impedance and optimized for frequencies from 30 to
1000 MHz.
SYMBOL
i
CONDITIONS
25 C; 10 kHz;
0.25 mT
25 C; 10 kHz;
1200 A/m
100 C; 10 kHz;
1200 A/m
25 C; 30 MHz
25 C; 300 MHz
DC; 25 C
Z(1)
TC
density
VALUE
MBW306
10 4
4S2
's , ''s
UNIT
850
's
10 3
340
mT
''s
230
10 2
50
90
105
125
5000
m
C
kg/m3
10
10 1
10
f (MHz)
10 2
Note
1. Measured on a bead 5 2 10 mm.
Fig.1
25 oC
100 oC
handbook, halfpage
B
(mT)
4S2
MBW308
500
MBW307
2000
Complex permeability as
a function of frequency.
4S2
400
1500
300
1000
200
500
100
0
50
50
Fig.2
2013 Jul 31
150
T ( o C)
250
Initial permeability as a
function of temperature.
50
50
100
500
1000
H (A/m)
167
Ferroxcube
Material specification
4S2
MBW220
150
4S2
handbook, halfpage
Z
()
100
50
10
102
f (MHz)
103
2013 Jul 31
168
Ferroxcube
Material specification
4S3
4S3 SPECIFICATIONS
Wideband EMI-suppression material specified on
impedance and optimized for frequencies from 30 to
1000 MHz.
SYMBOL
i
B
Z(1)
TC
density
CONDITIONS
VALUE
25 C; 10 kHz;
0.25 mT
25 C; 10 kHz;
3000 A/m
100 C; 10 kHz;
3000 A/m
25 C; 30 MHz
25 C; 50 MHz
25 C; 200 MHz
25 C; 500 MHz
DC; 25 C
250 20 %
360
mT
10
310
10
40
200
250
105
250
4600
''s
10
m
C
kg/m3
1
1
MFP216
500
B
(mT)
400
400
300
300
200
200
100
100
100
Fig.2
2013 Jul 31
300
T ( o C)
0
100
500
Initial permeability as a
function of temperature.
100
200
4S3
1000
2000
H (A/m)
169
10
MFP217
25 oC
100 oC
handbook, halfpage
f (MHz)
Complex permeability as
a function of frequency.
500
4S3
handbook, halfpage
102
10
Fig.1
4S3
's
's , ''s
Note
0
50
MFP215
10 3
handbook, halfpage
UNIT
Ferroxcube
Material specification
4S3
MFP228
150
4S3
Z
()
100
50
10
102
f (MHz)
103
2013 Jul 31
170
Ferroxcube
Material specification
4S60
4S60 SPECIFICATIONS
High permeability specialty NiZn ferrite only used in
absorber tiles for anechoic chambers operating at
frequencies up to 1000 MHz.
SYMBOL
CONDITIONS
VALUE
25 C; 10 kHz;
0.25 mT
2000 20 %
25 C; 10 kHz;
1200 A/m
260
80 C; 10 kHz;
1200 A/m
150
DC; 25 C
105
MFP108
10 4
handbook, halfpage
UNIT
's
's , ''s
mT
4S60
10 3
''s
TC
100
density
5 000
kg/m 3
10 2
10
10 1
Fig.1
MFP109
5000
handbook, halfpage
3000
300
2000
200
1000
100
0
50
50
Fig.2
2013 Jul 31
150
T ( o C)
25 oC
80 oC
B
(mT)
400
250
Initial permeability as a
function of temperature.
25
Fig.3
171
10
MFP110
500
4000
f (MHz)
Complex permeability as
a function of frequency.
handbook, halfpage
4S60
10
25
50
4S60
150
H (A/m)
250
Ferroxcube
Material specification
4S60
MFP111
1000
4S60
' ,''
r r
''r
100
'r
' ,''
r r
10
'r
''r
1
10
10
Fig.4
10
f (MHz)
10
MFP112
0
4S60
R (dB)
10
20
30
1
Fig.5
2013 Jul 31
102
10
172
103
f (MHz)
104
Ferroxcube
Material specification
8C11
8C11 SPECIFICATIONS
High permeability specialty NiZn ferrite only used in
large toroids and machined products mainly for
scientific particle accelerators operating at frequencies
up to 1 MHz.
SYMBOL
CONDITIONS
VALUE
25 C; 10 kHz;
0.25 mT
1200 20%
25 C; 10 kHz;
1200 A/m
310
100 C; 10 kHz;
1200 A/m
210
DC; 25 C
's , ''s
UNIT
's
103
mT
102
105
125
density
5100
kg/m3
10
101
Fig.1
MBW453
2000
10
2
f (MHz) 10
MBW454
500
25 oC
100 oC
handbook, halfpage
8C11
8C11
''s
TC
handbook, halfpage
MBW452
104
handbook, halfpage
B
(mT)
8C11
400
1500
300
1000
200
500
100
0
50
Fig.2
2013 Jul 31
50
150
T ( oC)
250
50
50
100
500
173
1000
H (A/m)
Ferroxcube
Material specification
8C12
8C12 SPECIFICATIONS
High permeability specialty NiZn ferrite only used in
large toroids and machined products mainly for
scientific particle accelerators operating at frequencies
up to 2 MHz.
SYMBOL
CONDITIONS
VALUE
25 C; 10 kHz;
0.25 mT
900 20%
25 C; 10 kHz;
1200 A/m
260
100 C; 10 kHz;
1200 A/m
180
DC; 25 C
's , ''s
UNIT
's
103
mT
102
105
125
density
5100
kg/m3
10
101
Fig.1
MBW456
2000
10
2
f (MHz) 10
MBW457
500
25 oC
100 oC
handbook, halfpage
8C12
8C12
''s
TC
handbook, halfpage
MBW455
104
handbook, halfpage
B
(mT)
8C12
400
1500
300
1000
200
500
100
0
50
Fig.2
2013 Jul 31
50
150
T ( oC)
250
50
50
100
500
174
1000
H (A/m)
Ferroxcube
Soft Ferrites
2013 Jul 31
175
Ferroxcube
Soft Ferrites
Specialty Ferrites
CBW625
2013 Jul 31
176
Ferroxcube
Soft Ferrites
Specialty Ferrites
INTRODUCTION
Our materials
2013 Jul 31
177
Ferroxcube
Soft Ferrites
Specialty Ferrites
2013 Jul 31
8C11
1200
850
300
280
20
>105
125
8C12
900
600
280
250
30
>105
125
4M2
140
130
250
220
100
>105
150
4E2
25
20
250
220
500
>105
400
4B3
300
300
<80
>105
250
15 103
9 103
4 103
10 103
6 103
2.5 103
10 103
7.5 103
5 103
20 103
20 103
15 103
8 103
20 103
20 103
15 103
7 103
15 103
15 103
10 103
7 103
12 103
10 103
2.5 103
2 103
10
600
120
50
22
8
5.5
up to 2
15
130
80
40
22
12
8
2 to 10
30
20 to 100
kicker
high frequency fast recovery high frequency
magnets; high ratio possible after magnetic
material
resistance
with DC bias
bias
178
high
(Bs + Br )
Ferroxcube
Soft Ferrites
Specialty Ferrites
CORE TYPE
Ae
(mm 2)
T 500/300/25 4M2
MASS
(g)
T170/110/20
252000
591
1300
T240/160/20
482000
789
2500
T350/180/25
1590000
2050
core material
core size
T440/250/25
2380000
2310
T500/240/25
3300000
3100
19 000
T500/300/25
2950000
2450
16 000
core type
CBW626
PARAMETER
170 0.2
110 0.2
VALUE
UNIT
(l/A)
0.722
mm1
Ve
effective volume
252000
mm3
le
effective length
426
mm
Ae
effective area
591
mm2
mass
1300
GRADE
8C11
4M2
2600
TYPE NUMBER
T170/110/20-8C11
T170/110/20-4M2
20
0.2
MBG813
Dimensions in mm.
2013 Jul 31
179
Ferroxcube
Soft Ferrites
Specialty Ferrites
240 0.2
PARAMETER
VALUE
UNIT
(l/A)
0.774
mm1
Ve
effective volume
482000
mm3
le
effective length
611
mm
Ae
effective area
789
mm2
mass
2500
160 0.2
GRADE
8C11
4M2
TYPE NUMBER
T240/160/20-8C11
T240/160/20-4M2
20 0.2
MFP189
Dimensions in mm.
350 0.2
PARAMETER
VALUE
UNIT
(l/A)
0.378
mm1
Ve
effective volume
1590 000
mm3
le
effective length
774
mm
Ae
effective area
2050
mm2
mass
180 0.2
AL
(nH)
TYPE NUMBER
T350/180/25-8C12
T350/180/25-4M2
25 0.2
MFP190
Dimensions in mm.
2013 Jul 31
180
Ferroxcube
Soft Ferrites
Specialty Ferrites
440 0.2
PARAMETER
VALUE
UNIT
(l/A)
0.445
mm1
Ve
effective volume
2380 000
mm3
le
effective length
1030
mm
Ae
effective area
2310
mm2
mass
250 0.2
GRADE
8C12
4M2
TYPE NUMBER
T440/250/25-8C12
T440/250/25-4M2
25 0.2
MFP191
Dimensions in mm.
PARAMETER
240 0.2
VALUE
UNIT
(l/A)
0.342
mm1
Ve
effective volume
3300000
mm3
le
effective length
1060
mm
Ae
effective area
3100
mm2
mass
19000
AL
(nH)
TYPE NUMBER
8C12
T500/240/25-8C12
4M2
T500/240/25-4M2
25
0.2
MBG811
Dimensions in mm.
2013 Jul 31
181
Ferroxcube
Soft Ferrites
Specialty Ferrites
PARAMETER
VALUE
UNIT
(l/A)
0.492
mm1
Ve
effective volume
2950000
mm3
le
effective length
1200
mm
Ae
effective area
2450
mm2
mass
16000
handbook, halfpage
500 0.2
300 0.2
AL
(nH)
TYPE NUMBER
8C12
T500/300/25-8C12
4M2
T500/300/25-4M2
MBG810
Dimensions in mm.
2013 Jul 31
182
25
0.2
Ferroxcube
Soft Ferrites
Specialty Ferrites
210 0.2
50
0.2
140
0.2
MFP188
Fig.8
60
0.2
270 0.2
60
0.2
330 0.2
110
0.2
250
0.2
MFP193
MFP192
Fig.9
2013 Jul 31
183
Ferroxcube
Soft Ferrites
Specialty Ferrites
handbook, halfpage
178.8
142.2
63.5
82.6
17.2
MBW489
ER type core
handbook, halfpage
handbook, halfpage
35.3
75
61.2
111.3
25
89.6
119o
50.7
75
;;;;;
;;;;;
11
50
34.7
50
MBW488
MBW490
PM type core.
2013 Jul 31
184
Ferroxcube
Soft Ferrites
Specialty Ferrites
handbook, halfpage
handbook, halfpage
400
390
60
40
d
40
H
MBW487
MBW486
2013 Jul 31
185
Ferroxcube
Soft Ferrites
Specialty Ferrites
6.0
0.2
100 0.2
6.0
0.2
100 0.2
100
0.2
100
0.2
10
0.3
R 0.5
(4x)
R 0.5
(4x)
MFP113
2013 Jul 31
MFP114
186
Ferroxcube
Soft Ferrites
2013 Jul 31
187
Ferroxcube
Soft Ferrites
MFP226
2013 Jul 31
188
Ferroxcube
Soft Ferrites
Ve
(mm3)
33.3
Ae
(mm2)
2.66
MASS
(g)
special version
0.08
E6.3/2.9/2
40.6
3.30
0.12
E8.8/4.1/2
78.0
5.00
0.25
E13/6/3
281
10.1
0.7
E13/6/6
559
20.2
1.4
E13/7/4
369
12.4
0.9
E16/8/5
750
20.1
2.0
E16/12/5
1070
19.4
2.6
E19/8/5
900
22.6
2.3
E19/8/9
1650
41.3
4.0
E20/10/5
1340
31.2
4.0
E20/10/6
1490
32.0
3.7
E20/14/5
1513
24.4
4.2
E25/10/6
1930
37.0
4.8
E25/13/7
2990
52.0
8.0
E25/13/11
4500
78.4
11
E30/15/7
4000
60.0
11
E31/13/9
5150
83.2
13
E32/16/9
6180
83.0
16
E34/14/9
5590
80.7
14
E35/18/10
8070
100
15
E36/21/12
12 160
126
31
E41/17/12
11 500
149
30
E42/21/15
17 300
178
44
E42/21/20
22 700
233
56
E42/33/20
34 200
236
82
E47/20/16
20 800
234
53
E55/28/21
44 000
353
108
E55/28/25
52 000
420
130
E56/24/19
36 000
337
90
E65/32/27
79 000
540
205
E71/33/32
102000
683
260
E80/38/20
72 300
392
180
E100/60/28
202000
738
493
2013 Jul 31
andbook, 4 columns
AL value (nH)
or gap size (m)
gap type:
A unsymmetrical gap to AL value
E symmetrical gap to AL value
G mechanical gap
core material
core size
core type
CBW001
C S H S E13/4 1S 10P E
handbook, 4 columns
special version
number and type of pins:
D dual termination
F flat
L long
number of sections
associated core type
mounting type: S surface mount
mounting orientation: H horizontal
V vertical
plastic material type: P thermoplastic
S thermoset
coil former (bobbin)
CBW002
189
Ferroxcube
E5.3/2.7/2
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
5.25 0.1
handbook, halfpage
VALUE
+0.2
0
0
1.4 0.1
UNIT
(I/A)
4.70
mm1
Ve
effective volume
33.3
mm3
Ie
effective length
12.5
mm
Ae
effective area
2.66
mm2
Amin
minimum area
2.63
mm2
0.08
3.8
1.9
2.0
+0.15
0
2.65
0.05
0
0.1
CBW003
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C96
275 25%
1030
E5.3/2.7/2-3C96
3F3
265 25%
990
E5.3/2.7/2-3F3
3F35
225 25%
840
E5.3/2.7/2-3F35
3F4
165 25%
615
E5.3/2.7/2-3F4
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
3C96
340
0.0024
0.016
0.007
3F3
300
0.005
0.008
3F35
300
0.003
3F4
250
GRADE
2013 Jul 31
T = 100 C
190
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
Ferroxcube
E5.3/2.7/2
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
3C96
340
0.012
3F3
300
3F35
300
0.004
0.035
3F4
250
0.01
0.015
GRADE
2013 Jul 31
f = 500 kHz;
= 100 mT;
B
T = 100 C
191
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
Ferroxcube
E5.3/2.7/2
COIL FORMERS
General data
PARAMETER
SPECIFICATION
liquid crystal polymer (LCP), glass reinforced, flame retardant in accordance with
UL 94V-0; UL file number E54705(M)
Pin material
Solderability
3.6 0.1
4.7
max.
1.2
3.7 0
0.15
2.6
min.
2.3 0.1
1.5 +0.1
0
2.15
+0.1 2.9 0
0.1
0
5.5
4.9
max.
0.6
0.5
0.25
3.7
5.3 max.
1.6
4.9
1.85
7.85 max.
CBW163
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
1.5
2.6
12.6
3.99
1.5
2.6
12.6
3.99
CPHS-E5.3/2-1S-6P-Z
2 0.6
2 1.0
12.6
2 x 1.60
CPHS-E5.3/2-2S-6P-Z
2013 Jul 31
192
TYPE NUMBER
CPHS-E5.3/2-1S-4P-Z
Ferroxcube
E5.3/2.7/2
MOUNTING PARTS
General data for mounting parts
ITEM
REMARKS
FIGURE
TYPE NUMBER
Clamp
CLM-E5.3/2
Cover
COV-E5.3/2
4.8 max.
1.5
handbook, halfpage
1.6
max.
handbook, halfpage
4.8
max.
5.8
CBW164
CBW165
Dimensions in mm.
Dimensions in mm.
2013 Jul 31
193
Ferroxcube
E5.3/2.7/2
K0
handbook, full pagewidth
P0
D0
P2
E
F
cover tape
B0
A0
D1
P1
direction of unreeling
SIZE
DIMENSIONS
(mm)
A0
3.0 0.1
B0
5.7 0.1
K0
2.2 0.1
0.25 0.05
12.0 0.3
1.75 0.1
5.5 0.05
D0
1.5 +0.1
D1
1.5
P0
4.0 0.1
P1
8.0 0.1
P2
2.0 0.1
2013 Jul 31
194
MEA613 - 1
Ferroxcube
E5.3/2.7/2
cover film
direction of
unreeling
blister tape
MEA639
direction of unreeling
leader 552 mm
minimum number of
empty compartments
trailer
Leader: length of leader tape is 552 mm minimum covered with cover tape.
Trailer: 160 mm minimum (secured with tape).
Storage temperature range for tape: 25 to +45 C.
2013 Jul 31
195
Ferroxcube
E5.3/2.7/2
W2
20.5
12.75
0.15
N
0
MSA284
W1
Dimensions in mm.
For dimensions see Table 2.
Fig.8 Reel.
Table 2
SIZE
12
2013 Jul 31
W1
W2
330
100 5
12.4
16.4
196
Ferroxcube
E6.3/2.9/2
CORE SETS
SYMBOL
PARAMETER
0
0.25
+0.2
3.6
0
1.4 0
0.1
handbook, halfpage
6.3
UNIT
(I/A)
3.67
mm1
Ve
effective volume
40.6
mm3
Ie
effective length
12.2
mm
Ae
effective area
3.3
mm2
Amin
minimum area
2.6
mm2
0.12
1.85
2.0
+0.1
0 2.9 0
0.1
0
0.1
CBW004
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C96
380 25%
1110
E6.3/2.9/2-3C96
3F3
360 25%
1050
E6.3/2.9/2-3F3
3F35
300 25%
875
E6.3/2.9/2-3F35
3F4
225 25%
660
E6.3/2.9/2-3F4
2013 Jul 31
197
Ferroxcube
E6.3/2.9/2
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C96
340
0.003
0.02
0.008
3F3
300
0.007
0.01
3F35
300
0.004
3F4
250
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
3C96
340
0.015
3F3
300
3F35
300
0.005
0.045
3F4
250
0.012
0.019
GRADE
2013 Jul 31
f = 500 kHz;
= 100 mT;
B
T = 100 C
T = 100 C
198
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
Ferroxcube
E6.3/2.9/2
COIL FORMERS
General data
PARAMETER
SPECIFICATION
liquid crystal polymer (LCP), glass reinforced, flame retardant in accordance with
UL 94V-0; UL file number E54705(M)
Pin material
Solderability
4.4
3.5
0.08
2.3
0.05
1.5 +0.1
0
1.6
5.5
3.5 0
0.1
1.6
2.7
min.
2.9
2.1 +0.1 0.05
0
4.7
max.
0.6
6.5
5
max.
0.25
5.08
1.2
8.6 max.
2.54
6.4 max.
CBW166
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
1.62
2.7
12.8
5.35
CPHS-E6.3/2-1S-4P-Z
1.62
2.7
12.8
5.35
CPHS-E6.3/2-1S-6P-Z
2 0.45
2 0.75
12.8
2 x 1.49
CPHS-E6.3/2-2S-4P-Z
2 0.45
2 0.75
12.8
2 x 1.49
CPHS-E6.3/2-2S-6P-Z
2013 Jul 31
199
TYPE NUMBER
Ferroxcube
E6.3/2.9/2
MOUNTING PARTS
General data for mounting parts
ITEM
REMARKS
Cover
FIGURE
7.7 max.
5.1 max.
handbook, halfpage
6.9
max.
CBW167
Dimensions in mm.
2013 Jul 31
200
TYPE NUMBER
COV-E6.3/2
Ferroxcube
E6.3/2.9/2
K0
handbook, full pagewidth
P0
D0
P2
E
F
cover tape
B0
A0
D1
P1
direction of unreeling
SIZE
DIMENSIONS
(mm)
A0
3.2 0.1
B0
6.6 0.1
K0
2.1 0.1
0.25 0.05
12.0 0.3
1.75 0.1
5.5 0.05
D0
1.5 +0.1
D1
1.5
P0
4.0 0.1
P1
8.0 0.1
P2
2.0 0.1
2013 Jul 31
201
MEA613 - 1
Ferroxcube
E6.3/2.9/2
cover film
direction of
unreeling
blister tape
MEA639
direction of unreeling
leader 552 mm
minimum number of
empty compartments
trailer
Leader: length of leader tape is 552 mm minimum covered with cover tape.
Trailer: 160 mm minimum (secured with tape).
Storage temperature range for tape: 25 to +45 C.
2013 Jul 31
202
Ferroxcube
E6.3/2.9/2
W2
20.5
12.75
0.15
N
0
MSA284
W1
Dimensions in mm.
For dimensions see Table 2.
Fig.7 Reel.
Table 2
SIZE
12
2013 Jul 31
W1
W2
330
100 5
12.4
16.4
203
Ferroxcube
E8.8/4.1/2
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
9 0.4
VALUE
UNIT
(I/A)
3.13
mm1
Ve
effective volume
78
mm3
Ie
effective length
15.6
mm
Ae
effective area
5.0
mm2
Amin
minimum area
3.6
mm2
0.25
5.2 0.13
1.9
0.12
handbook, halfpage
2.03 +0.32
0
4.1 0
0.2
2.0 0
0.2
CBW228
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C96
480 25%
1190
3F3
460 25%
1140
E8.8/4.1/2-3F3
3F35
380 25%
940
E8.8/4.1/2-3F35
3F4
280 25%
695
E8.8/4.1/2-3F4
E8.8/4.1/2-3C96
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C96
340
0.0055
0.032
0.014
3F3
300
0.01
0.014
3F35
300
0.007
3F4
250
2013 Jul 31
204
Ferroxcube
E8.8/4.1/2
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C96
340
0.029
3F3
300
3F35
300
0.011
0.082
3F4
250
0.023
0.037
GRADE
2013 Jul 31
205
Ferroxcube
E13/6/3
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
(I/A)
2.74
mm1
Ve
effective volume
281
mm3
Ie
effective length
27.8
mm
Ae
effective area
10.1
mm2
Amin
minimum area
10.1
mm2
0.7
12.7 0.25
handbook, halfpage
UNIT
9.5 0.25
3.2
0.13
handbook, halfpage
4.1
0.13
5.7
0.13
3.18 0.13
CBW556
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
63 5%
138
250
E13/6/3-3C90-A63
100 8%
219
140
E13/6/3-3C90-A100
160 8%
350
75
E13/6/3-3C90-A160
250 20%
548
40
E13/6/3-3C90-A250
315 20%
690
30
E13/6/3-3C90-A315
730 25%
1590
E13/6/3-3C90
3C92
540 25%
1180
E13/6/3-3C92
3C94
730 25%
1590
E13/6/3-3C94
3C96
660 25%
1440
E13/6/3-3C96
3C90
2013 Jul 31
AL
(nH)
AIR GAP
(m)
1300 25%
2830
206
TYPE NUMBER
E13/6/3-3E27
Ferroxcube
E13/6/3
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
3C90
320
0.03
0.03
3C92
370
0.022
0.16
3C94
320
0.024
0.15
3C96
340
0.019
0.13
0.11
2013 Jul 31
207
Ferroxcube
E13/6/6
(814E250)
PARAMETER
12.7 0.25
handbook, halfpage
VALUE
9.5 0.25
3.2
0.13
UNIT
(I/A)
1.37
mm1
Ve
effective volume
559
mm3
Ie
effective length
27.7
mm
Ae
effective area
20.2
mm2
Amin
minimum area
20.2
mm2
1.4
4.1
0.13
5.7
0.13
6.4
0.13
CBW005
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
63 5%
70
560
E13/6/6-3C90-A63
100 8%
110
310
E13/6/6-3C90-A100
160 8%
175
175
E13/6/6-3C90-A160
250 20%
275
100
E13/6/6-3C90-A250
315 20%
340
75
1470 25%
1 605
E13/6/6-3C90
E13/6/6-3C92
E13/6/6-3C90-A315
3C92
1080 25%
1180
3C94
1470 25%
1 605
E13/6/6-3C94
3C96
1250 25%
1360
E13/6/6-3C96
70
560
3F3
3F35
2013 Jul 31
63 5%
E13/6/6-3F3-A63
100 8%
110
310
E13/6/6-3F3-A100
160 8%
175
175
E13/6/6-3F3-A160
250 20%
275
100
E13/6/6-3F3-A250
315 20%
340
75
E13/6/6-3F3-A315
1 250 25%
1 370
E13/6/6-3F3
1 000 25%
1 090
E13/6/6-3F35
208
Ferroxcube
E13/6/6
(814E250)
AIR GAP
(m)
2600 25%
2840
GRADE
3E27
TYPE NUMBER
E13/6/6-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C90
320
0.06
0.06
3C92
370
0.048
0.33
GRADE
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C94
320
0.048
0.33
3C96
340
0.037
0.25
3F3
320
0.06
0.11
3F35
300
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
3C96
340
0.21
3F3
315
3F35
300
0.075
0.6
GRADE
T = 100 C
Note
1. Measured at 60 C.
2013 Jul 31
209
f = 3 MHz;
= 10 mT;
B
T = 100 C
Ferroxcube
E13/6/6
(814E250)
SPECIFICATION
9.25 max.
7.9 max.
4.5
6.5
3.2
min.
1.2
12.7 6.35
max. min.
7.6
CBW006
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm 2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
15.4
6.5
32.0
311
2013 Jul 31
210
TYPE NUMBER
CP-E13/6/6-1S
Ferroxcube
E13/6/6
(814E250)
SPECIFICATION
9.25 max.
7.9 max.
4.5
6.5
3.2
min.
1.2
12.7 6.35
max. min.
7.6
CBW006
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm 2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
15.4
6.5
32.0
311
2013 Jul 31
211
TYPE NUMBER
CP-E13/6/6-1S-A
Ferroxcube
E13/7/4
(EF12.6)
PARAMETER
VALUE
(I/A)
2.39
mm1
Ve
effective volume
369
mm3
Ie
effective length
29.7
mm
Ae
effective area
12.4
mm2
Amin
minimum area
12.2
mm2
0.9
12.6 +0.5
0.4
handbook, halfpage
UNIT
8.9 +0.6
0
3.7
0
0.3
4.5 +0.3
0
3.7
6.5
0
0.2
0
0.3
CBW007
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
63 5%
120
320
E13/7/4-3C90-A63
100 8%
190
175
E13/7/4-3C90-A100
160 8%
305
100
E13/7/4-3C90-A160
250 15%
480
55
E13/7/4-3C90-A250
315 15%
600
40
800 25%
1 525
E13/7/4-3C90-A315
E13/7/4-3C90
3C92
630 25%
1200
E13/7/4-3C92
3C94
800 25%
1 525
E13/7/4-3C94
3C96
700 25%
1330
63 5%
120
320
100 8%
190
175
E13/7/4-3F3-A100
160 8%
305
100
E13/7/4-3F3-A160
3F3
3F35
2013 Jul 31
E13/7/4-3C96
E13/7/4-3F3-A63
250 15%
480
55
E13/7/4-3F3-A250
315 15%
600
40
E13/7/4-3F3-A315
700 25%
1 330
E13/7/4-3F3
560 25%
1 070
E13/7/4-3F35
212
Ferroxcube
E13/7/4
(EF12.6)
AIR GAP
(m)
1 500 25%
2800
GRADE
3E27
TYPE NUMBER
E13/7/4-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
3C90
320
0.05
3C92
370
GRADE
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
0.05
0.04
0.2
3C94
320
0.04
0.2
3C96
340
0.03
0.16
3F3
320
0.05
0.07
3F35
300
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C90
320
3C92
370
3C94
320
3C96
340
0.14
3F3
315
3F35
300
0.05
0.39
GRADE
2013 Jul 31
213
Ferroxcube
E13/7/4
(EF12.6)
SPECIFICATION
Pin material
Solderability
8.7 0
0.2
5.2
8.5 0
0.15
7.1 min.
5
3.9 +0.15
0
9.6
max.
1.5
5.5
0.6
10 0.1
10 0.1
12.9 max.
1 +0.15
0
12.8 max.
CBW008
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
11.6
7.1
24
144
2013 Jul 31
214
TYPE NUMBER
CPH-E13/7/4-1S-6P
Ferroxcube
E13/7/4
(EF12.6)
SPECIFICATION
Pin material
Solderability
8.7 0
0.2
7.3 0.1
3.9 0.1
1 2 3 4 5
3.9
0.1
10.3
0.2
1
0.1
0.5
0.05
10.16
4
0.5
5.5
0.1
0.5
0.05
2.54
6 7
8 9
10
1.3 + 0.15
0
10.16
5.08
MFP146
15.1 0.2
10.16
13.4 0.2
Dimensions in mm.
AVERAGE
LENGTH
OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
NUMBER
OF
SECTIONS
NUMBER
OF PINS
10
all
10.4
7.2
29.6
129
CSH-E13/7/4-1S-10P-C
1,2,4,5,7,9
10.4
7.2
29.6
129
CSH-E13/7/4-1S-6P-C
1,2,3,4,5,7,9
10.4
7.2
29.6
129
CSH-E13/7/4-1S-7P-C
2013 Jul 31
PIN
POSITIONS
USED
WINDING
AREA
(mm2)
215
TYPE NUMBER
Ferroxcube
E16/8/5
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
(I/A)
1.87
mm1
Ve
effective volume
750
mm3
Ie
effective length
37.6
mm
Ae
effective area
20.1
mm2
Amin
minimum area
19.3
mm2
2.0
16
handbook, halfpage
UNIT
+0.7
0.5
11.3 +0.6
0
0
4.7
0.3
+0.4
0
5.7
8.2
0
0.3
R1
4.7
0
0.4
CBW009
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
63 5%
95
570
E16/8/5-3C90-A63
100 8%
150
310
E16/8/5-3C90-A100
160 8%
240
170
E16/8/5-3C90-A160
250 15%
370
95
E16/8/5-3C90-A250
315 15%
470
70
E16/8/5-3C90-A315
1100 25%
1640
E16/8/5-3C90
E16/8/5-3C92
3C92
840 25%
1250
3C94
1100 25%
1 640
E16/8/5-3C94
3C96
980 25%
1460
E16/8/5-3C96
3F3
3F35
2013 Jul 31
63 5%
95
570
E16/8/5-3F3-A63
100 8%
150
310
E16/8/5-3F3-A100
160 8%
240
170
E16/8/5-3F3-A160
250 15%
370
95
E16/8/5-3F3-A250
315 15%
470
70
E16/8/5-3F3-A315
980 25%
1 460
E16/8/5-3F3
760 25%
1 130
E16/8/5-3F35
216
Ferroxcube
E16/8/5
AIR GAP
(m)
2 200 25%
3300
GRADE
3E27
TYPE NUMBER
E16/8/5-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C90
320
0.1
3C92
370
3C94
320
3C96
340
3F3
320
3F35
300
GRADE
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
0.1
0.075
0.38
0.075
0.38
0.055
0.3
0.1
0.15
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C90
320
3C92
370
3C94
320
3C96
340
0.28
3F3
315
3F35
300
0.1
0.8
GRADE
2013 Jul 31
217
Ferroxcube
E16/8/5
COIL FORMER
General data for 6-pins E16/8/5 coil former
PARAMETER
SPECIFICATION
Pin material
Solderability
11.1 0
0.2
9.4 min.
6.1 0.1
4.9 +0.2
0
13.45
max.
2.5
4.9 +0.2
0
11
max.
2.2
3
10.9 0
0.2
12.5 0.15
7.5 0.1
16.15 max.
13.5 max.
0.6
1
+0.15
0
CBW010
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
21.6
9.4
33
434
2013 Jul 31
218
TYPE NUMBER
CPH-E16/8/5-1S-6P-Z
Ferroxcube
E16/8/5
COIL FORMER
General data for 9-pins E16/8/5 coil former
PARAMETER
SPECIFICATION
Pin material
Solderability
15
11.1 0.2
6.4 0.2
4.9 0.15
14.9 0.3
11.15 0.2
9.5 0.2
4.9 0.15
2.5 0.2
4 0.3
0.64 0.05
17 0.3
0.64 0.05
23.8 0.4
19.8 0.3
14
MFW047
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
20.2
9.6
35
406
TYPE NUMBER
CSH-E16/8/5-1S-9P
Note
1. This coil former is optimized for the use of triple-isolated wire. This wire is approved for safety isolation without the
usual creepage distance.
2013 Jul 31
219
Ferroxcube
E16/12/5
(EL16)
PARAMETER
VALUE
UNIT
(I/A)
2.85
mm1
Ve
effective volume
1070
mm3
Ie
effective length
55.3
mm
Ae
effective area
19.4
mm2
Amin
minimum area
19.4
mm2
2.6
16 0.3
handbook, halfpage
12 0.3
4 0.2
handbook, halfpage
10.25
0.25
12.25
0.2
4.85 0.2
CBW582
Dimensions in mm.
AL
(nH)
3C90
800 25%
1810
E16/12/5-3C90
3C92
580 25%
1320
E16/12/5-3C92
GRADE
TYPE NUMBER
AL
(nH)
AIR GAP
(m)
2 000 25%
4530
TYPE NUMBER
E16/12/5-3E26
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
3C90
315
0.13
0.14
3C92
370
0.1
0.65
GRADE
2013 Jul 31
220
f = 100 kHz;
= 200 mT;
B
T = 100 C
Ferroxcube
E19/8/5
(813E187)
PARAMETER
VALUE
UNIT
(I/A)
1.77
mm1
Ve
effective volume
900
mm3
Ie
effective length
39.9
mm
Ae
effective area
22.6
mm2
Amin
minimum area
22.1
mm2
2.3
19.1 0.4
handbook, halfpage
14.3 0.3
4.7
0.13
5.7
0.13
8.1
0.13
4.7
0.13
CBW011
Dimensions in mm.
3C90
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
63 5%
88
650
E19/8/5-3C81-A63
100 8%
140
350
E19/8/5-3C81-A100
E19/8/5-3C81-A160
160 8%
225
200
250 15%
350
110
E19/8/5-3C81-A250
315 15%
440
80
E19/8/5-3C81-A315
1500 25%
2 110
E19/8/5-3C81
63 5%
88
640
E19/8/5-3C90-A63
100 8%
140
350
E19/8/5-3C90-A100
E19/8/5-3C90-A160
160 8%
225
190
250 15%
350
110
E19/8/5-3C90-A250
315 15%
440
80
E19/8/5-3C90-A315
1170 25%
1 650
3C91
1500 25%
2110
E19/8/5-3C91
3C92
900 25%
1260
E19/8/5-3C92
3C94
1170 25%
1 650
E19/8/5-3C94
3C96
1000 25%
1400
E19/8/5-3C96
2013 Jul 31
221
E19/8/5-3C90
Ferroxcube
E19/8/5
(813E187)
AL
(nH)
GRADE
3F3
3F35
AIR GAP
(m)
TYPE NUMBER
63 5%
88
640
E19/8/5-3F3-A63
100 8%
140
330
E19/8/5-3F3-A100
160 8%
225
190
E19/8/5-3F3-A160
250 15%
350
110
E19/8/5-3F3-A250
315 15%
440
80
E19/8/5-3F3-A315
1000 25%
1 400
E19/8/5-3F3
810 25%
1140
E19/8/5-3F35
AIR GAP
(m)
2 300 25%
3230
GRADE
3E27
TYPE NUMBER
E19/8/5-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C81
320
0.2
3C90
320
0.09
0.1
3C91
320
0.064 (1)
0.37(1)
3C92
370
0.08
0.45
3C94
320
0.08
0.45
3C96
340
0.064
0.37
3F3
320
0.1
0.17
3F35
300
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C96
340
0.32
3F3
315
3F35
300
0.12
0.95
GRADE
T = 100 C
Note
1. Measured at 60 C.
2013 Jul 31
222
Ferroxcube
E19/8/5
(813E187)
SPECIFICATION
10.8
9.55
13.84
6.6
5.28
CBW012
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
33.0
9.5
37.9
746
2013 Jul 31
223
TYPE NUMBER
CP-E19/8/5-1S
Ferroxcube
E19/8/5
(813E187)
SPECIFICATION
Pin material
Solderability
10.92
13.6
9.3
5.08
6.6
15.8
3.8
min.
3.8(1)
0.64
5.1
13.06
17.78
19.3 max.
CBW013
2.41 0.38
Dimensions in mm.
MINIMUM
WNDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
32.3
9.4
40.9
730
2013 Jul 31
224
TYPE NUMBER
CPH-E19/8/5-1S-8PD-Z
Ferroxcube
E19/8/9
(813E343)
PARAMETER
VALUE
UNIT
(I/A)
0.960
mm1
Ve
effective volume
1650
mm3
Ie
effective length
39.9
mm
Ae
effective area
41.3
mm2
Amin
minimum area
41.1
mm2
4.0
19.05 0.38
handbook, halfpage
14.33 0.3
4.75
0.13
5.69
0.13
8.05
0.13
8.71
0.13
CBW014
Dimensions in mm.
3C90
AL
(nH)
63 5%(1)
48
1280
E19/8/9-3C81-E63
100 8%(1)
77
700
E19/8/9-3C81-E100
TYPE NUMBER
160 8%
123
390
E19/8/9-3C81-A160
250 15%
192
220
E19/8/9-3C81-A250
315 15%
242
170
E19/8/9-3C81-A315
2740 25%
2 680
5%(1)
48
1300
E19/8/9-3C90-E63
100 8%(1)
77
700
E19/8/9-3C90-E100
63
E19/8/9-3C81
160 8%
123
380
E19/8/9-3C90-A160
250 15%
192
220
E19/8/9-3C90-A250
E19/8/9-3C90-A315
315 15%
240
170
2150 25%
2 100
E19/8/9-3C90
3C91
2740 25%
2 680
E19/8/9-3C91
3C92
1640 25%
1250
E19/8/9-3C92
3C94
2150 25%
2 100
E19/8/9-3C94
3C96
1830 25%
1410
E19/8/9-3C96
2013 Jul 31
225
Ferroxcube
E19/8/9
(813E343)
3F3
3F35
AL
(nH)
63 5%(1)
48
1300
E19/8/9-3F3-E63
100 8%(1)
77
700
E19/8/9-3F3-E100
GRADE
TYPE NUMBER
160 8%
123
380
E19/8/9-3F3-A250
250 15%
192
220
E19/8/9-3F3-A315
315 15%
240
170
1830 25%
1410
E19/8/9-3F3
1490 25%
1150
E19/8/9-3F35
E19/8/9-3F3-A400
Note
1. Measured in combination with an equal gapped core half, clamping force for AL measurements, 20 10 N.
Core halves of high permeability grades
Clamping force for A L measurements, 20 10 N.
AL
(nH)
AIR GAP
(m)
4 250 25%
3270
GRADE
3E27
TYPE NUMBER
E19/8/9-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C81
320
0.4
3C90
320
0.17
0.18
3C91
320
0.11(1)
0.68(1)
3C92
370
0.14
0.85
3C94
320
0.14
0.85
3C96
340
0.11
0.68
3F3
320
0.18
0.31
3F35
300
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C96
340
0.6
3F3
315
3F35
300
0.22
1.7
Note
1. Measured at 60 C.
2013 Jul 31
226
Ferroxcube
E19/8/9
(813E343)
SPECIFICATION
13.85 max.
11.05 max.
5.85
10
4.8
min.
17.9 8.75
max. min.
9.8
CBW015
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
39.7
10
45.2
1640
2013 Jul 31
227
TYPE NUMBER
CP-E19/8/9-1S
Ferroxcube
E20/10/5
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
0
1.1
+0.8
12.8
0
0
5.2
0.4
20.7
VALUE
handbook, halfpage
UNIT
(I/A)
1.37
mm1
Ve
effective volume
1340
mm3
Ie
effective length
42.8
mm
Ae
effective area
31.2
mm2
Amin
minimum area
25.2
mm2
4.0
6.3 +0.4
0
R 0.5
10
0.2
R1
5.3
0
0.4
CBW016
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
63 5%
69
950
E20/10/5-3C90-A63
100 8%
109
510
E20/10/5-3C90-A100
160 8%
175
280
E20/10/5-3C90-A160
250 15%
273
160
E20/10/5-3C90-A250
315 15%
344
120
E20/10/5-3C90-A315
1500 25%
1 640
E20/10/5-3C90
3C92
1170 25%
1280
E20/10/5-3C92
3C94
1500 25%
1 640
E20/10/5-3C94
3C96
1400 25%
1530
E20/10/5-3C96
63 5%
69
950
E20/10/5-3F3-A63
100 8%
109
510
E20/10/5-3F3-A100
3F3
3F35
2013 Jul 31
160 8%
175
280
E20/10/5-3F3-A160
250 15%
273
160
E20/10/5-3F3-A250
315 15%
344
120
E20/10/5-3F3-A315
1400 25%
1530
E20/10/5-3F3
1060 25%
1 160
E20/10/5-3F35
228
Ferroxcube
E20/10/5
AIR GAP
(m)
3C11
2 600 25%
2840
E20/10/5-3C11
3E27
2 800 25%
2870
E20/10/5-3E27
GRADE
TYPE NUMBER
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C90
330
0.15
0.17
3C92
370
0.13
0.7
3C94
320
0.13
0.7
3C96
340
0.1
0.56
3F3
320
0.16
0.28
3F35
300
GRADE
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C90
330
3C92
370
3C94
320
3C96
340
0.5
3F3
320
3F35
300
0.18
1.4
GRADE
2013 Jul 31
229
Ferroxcube
E20/10/5
COIL FORMER
General data for 6-pins E20/10/5 coil former
PARAMETER
SPECIFICATION
Pin material
Solderability
0
7 0.2
12.6 0.1
3.5
10.8 min.
0.9
1.3 +0.15
0
12.7 7 0 5.3
max. 0.2 min.
10
5 0.3
10
4.5
CBW274
12.7 max.
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
28.6
10.8
38.7
892
2013 Jul 31
230
TYPE NUMBER
CPV-E20/10/5-1S-6P
Ferroxcube
E20/10/5
COIL FORMER
General data for 8-pins E20/10/5 coil former
PARAMETER
SPECIFICATION
Pin material
Solderability
0
0.2
7 0.1
0
0.2
(10.6 min.)
0
0.7
0.1
12.5
12.2
5.5 +0.1
0
12.5
max. 1.8 +0.1
0
5.08
5.5 +0.18
0
3.2
17.6 max
0.8 0.02
CBW017
17.6 max.
+0.15
1.3
0
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
27
10.6
38
842
2013 Jul 31
231
TYPE NUMBER
CSH-E20/10/5-1S-8P
Ferroxcube
E20/10/5
MOUNTING PARTS
General data and ordering information
ITEM
REMARKS
FIGURE
TYPE NUMBER
Clasp
CLA-E20/10/5
Spring
SPR-E20/10/5
10.5 0.1
0.8 0.1
5.6
18.7 0.1
+0.2
0
3 0.2
2 0.1
3 0.2
3.9 0.1
2.5 0.1
4.6 0.1
20.9 3
1.5 0
0.2
1.5 0.1
1 0.1
21.8
0.2
1 0.1
1.1 0
0.2
0.2
0.05
0.3
0.02
10.2
0.2
16.2 0.2
20.9 +0.2
0
Dimensions in mm.
5.5
0
0.1
6.4 0.1
8.7
0.6
1.8
21.8
0.2
0.9
CBW019
2.2
0
0.15
Dimensions in mm.
2013 Jul 31
232
CBW018
Ferroxcube
E20/10/6
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
(I/A)
1.45
mm1
Ve
effective volume
1 490
mm3
Ie
effective length
46.0
mm
Ae
effective area
32.0
mm2
Amin
minimum area
32.0
mm2
3.7
20 +0.8
0.6
handbook, halfpage
UNIT
14.1 +0.8
0
0
5.9
0.4
7 +0.4
0
10.2 0
0.4
R1.5
5.9
0
0.5
CBW020
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
63 5%
72
980
E20/10/6-3C90-A63
100 8%
114
520
E20/10/6-3C90-A100
160 8%
183
280
E20/10/6-3C90-A160
250 15%
286
160
E20/10/6-3C90-A250
315 15%
360
120
E20/10/6-3C90-A315
1450 25%
1 660
E20/10/6-3C90
3C92
1130 25%
1300
E20/10/6-3C92
3C94
1450 25%
1 660
E20/10/6-3C94
3C96
1350 25%
1580
E20/10/6-3C96
63 5%
72
980
E20/10/6-3F3-A63
100 8%
114
520
E20/10/6-3F3-A100
3F3
3F35
2013 Jul 31
160 8%
183
280
E20/10/6-3F3-A160
250 15%
286
160
E20/10/6-3F3-A250
315 15%
360
120
E20/10/6-3F3-A315
1350 25%
1580
E20/10/6-3F3
1000 25%
1 140
E20/10/6-3F35
233
Ferroxcube
E20/10/6
GRADE
AIR GAP
(m)
TYPE NUMBER
3C11
2600 25%
2970
E20/10/6-3C11
3E27
2700 25%
3090
E20/10/6-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C90
320
0.16
0.18
3C92
370
0.14
0.75
3C94
320
0.14
0.75
3C96
340
0.11
0.6
3F3
320
0.2
0.3
3F35
300
GRADE
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C90
320
3C92
370
3C94
320
3C96
340
0.55
3F3
320
3F35
300
0.2
1.5
GRADE
2013 Jul 31
234
Ferroxcube
E20/10/6
COIL FORMER
General data for 8-pins E20/10/6 coil former
PARAMETER
Coil former material
SPECIFICATION
polyamide (PA6.6), glass reinforced, flame retardant in accordance with
UL 94V-0; UL file number E41871(M)
Pin material
Solderability
13.9 0
0.15
0
0.2
11.8 min.
13.7
7.5 0.1
15.65
max.
5
6.1 +0.15
0
6.1 +0.15
0
14
max.
2
3.5
1.6
15 0.15
5
0.05
20.2 max.
0.8
1.3
+0.15
0
CBW021
15 0.15
20.2 max.
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
35
11.8
39
1120
2013 Jul 31
235
TYPE NUMBER
CPH-E20/10/6-1S-8P
Ferroxcube
E20/10/6
SPECIFICATION
Pin material
Solderability
19.1 max.
16.6 max.
handbook, full pagewidth
3.81
22.7 15.24
max.
11
10
0.1 0.1
7.4 6.1
0.1 0.1
15.24
22.7
max.
3.81
CBW264
9.2
min.
9.25
min.
11
10
0.1 0.1
17.5
max.
7.4 6.1
0.1 0.1
15.3
max.
5.95
3.8
0.7
0.7
Dimensions in mm.
For mounting grid and method of fitting, see Fig.4.
2013 Jul 31
236
Ferroxcube
E20/10/6
3.81
handbook, full pagewidth
CBW265
1.6 +0.15
0
Dimensions in mm.
This coil former incorporates 6 mm creepage distance between primary and secondary windings, as well
as between primary and all other conductive parts (in accordance with IEC 60380 safety regulations).
Winding data and area product for coaxial E20/10/6 coil former
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
NUMBER OF
SECTIONS
WINDING
AREA
(mm2)
11.3
9.2
34.7
362
CPCI-E20/6-1S-5P-G(1)
13.1
9.25
50
419
CPCO-E20/6-1S-5P-G(1)
TYPE NUMBER
Note
1. Also available with post-inserted pins. Different number of pins available on request for all types.
2013 Jul 31
237
Ferroxcube
E20/14/5
(EC19)
PARAMETER
VALUE
(I/A)
2.54
mm1
Ve
effective volume
1 513
mm3
Ie
effective length
62.0
mm
Ae
effective area
24.4
mm2
Amin
minimum area
22.8
mm2
4.3
20 0.3
handbook, halfpage
UNIT
14.3 min.
4.55
0.15
handbook, halfpage
11.15
0.15 13.55
0.15
5 0.2
CBW557
Dimensions in mm.
AIR GAP
(m)
3C90
900 25%
1820
E20/14/5-3C90
3C92
660 25%
1330
E20/14/5-3C92
AL
(nH)
AIR GAP
(m)
2300 25%
4650
GRADE
TYPE NUMBER
TYPE NUMBER
E20/14/5-3E26
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
3C90
330
0.16
0.18
3C92
370
0.13
0.9
GRADE
2013 Jul 31
238
Ferroxcube
E25/10/6
CORE SETS
Effective core parameters
25.4 0.6
handbook, halfpage
SYMBOL
PARAMETER
VALUE
18.8 min.
6.35
0.25
UNIT
(I/A)
1.24
mm1
Ve
effective volume
1930
mm3
Ie
effective length
49.0
mm
Ae
effective area
39.5
mm2
Amin
minimum area
37.0
mm2
4.8
6.4
min. 9.65
0.2
6.35
0.25
CBW023
Dimensions in mm.
Core halves
AL measured in combination with a non-gapped core half, clamping force for AL measurements, 20 10 N,
unless otherwise stated.
GRADE
3C81
3C90
AL
(nH)
63 5%(1)
TYPE NUMBER
62
1240
100 8%
99
660
E25/10/6-3C81-A100
160 8%
158
360
E25/10/6-3C81-A160
E25/10/6-3C81-E63
250 15%
247
210
E25/10/6-3C81-A250
315 15%
311
160
E25/10/6-3C81-A315
2340 25%
2 310
5%(1)
E25/10/6-3C81
62
1240
100 8%
99
660
E25/10/6-3C90-A100
160 8%
158
360
E25/10/6-3C90-A160
63
E25/10/6-3C90-E63
250 15%
247
210
E25/10/6-3C90-A250
315 15%
311
150
E25/10/6-3C90-A315
1600 25%
1580
E25/10/6-3C90
3C91
2340 25%
2 310
E25/10/6-3C91
3C92
1320 25%
1300
E25/10/6-3C92
3C94
1600 25%
1580
E25/10/6-3C94
3C96
1470 25%
1450
E25/10/6-3C96
2013 Jul 31
239
Ferroxcube
63 5%(1)
GRADE
3F3
3F35
E25/10/6
TOTAL AIR GAP
(m)
TYPE NUMBER
62
1240
100 8%
99
660
E25/10/6-3F3-A100
160 8%
158
360
E25/10/6-3F3-A160
E25/10/6-3F3-E63
250 15%
247
210
E25/10/6-3F3-A250
315 15%
311
150
E25/10/6-3F3-A315
1470 25%
1450
E25/10/6-3F3
1150 25%
1140
E25/10/6-3F35
Note
1. Measured in combination with an equal gapped core half, clamping force for AL measurements, 20 10 N.
Core halves of high permeability grades
Clamping force for A L measurements, 20 10 N.
AL
(nH)
AIR GAP
(m)
3200 25%
3160
GRADE
3E27
TYPE NUMBER
E25/10/6-3E27
3C81
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
320
0.4
3C90
330
0.2
0.22
3C91
320
0.13(1)
0.8(1)
3C92
370
0.17
1.0
3C94
330
0.17
1.0
3C96
340
0.13
0.8
3F3
320
0.22
0.38
3F35
300
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
3C96
340
0.7
3F3
320
3F35
300
0.26
2.0
GRADE
Note
1. Measured at 60 C.
2013 Jul 31
240
f = 3 MHz;
= 10 mT;
B
T = 100 C
Ferroxcube
E25/10/6
COIL FORMERS
General data for E25/10/6 coil former without pins
PARAMETER
SPECIFICATION
12.25 max.
10.8
18.8
max.
6.5
min.
CBW024
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
56.2
10.8
49.1
2220
2013 Jul 31
241
TYPE NUMBER
CP-E25/10/6-1S
Ferroxcube
E25/10/6
SPECIFICATION
Pin material
Solderability
18.7 max.
8.8
12.35 max.
6.6 min.
10.1
6.5
min.
20.4
max.
8.65
1.0
4.05
min.
3.8(1)
0.65
15.6
5.1
21.1 max.
26.3 max.
CBW025
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
47.4
10.1
53.1
1870
2013 Jul 31
242
TYPE NUMBER
CPH-E25/10/6-1S-10P-Z
Ferroxcube
E25/10/6
MOUNTING PARTS
General data for mounting parts
ITEM
REMARKS
FIGURE
Clamp
handbook, halfpage
6.35
26.5
19.8
0.4
CBW026
Dimensions in mm.
2013 Jul 31
243
TYPE NUMBER
CLM-E25/10/6
Ferroxcube
E25/13/7
(EF25)
PARAMETER
VALUE
UNIT
(I/A)
1.11
mm1
Ve
effective volume
2990
mm3
Ie
effective length
58.0
mm
Ae
effective area
52.0
mm2
Amin
minimum area
52.0
mm2
25 +0.8
0.7
handbook, halfpage
17.5 +1.0
0
0
7.5
0.5
8.7 +0.5
0
12.8 0
0.5
R2
7.5
0
0.5
CBW027
Dimensions in mm.
3C90
AL
(nH)
63 5%(1)
TYPE NUMBER
56
1740
100 8%
99
920
E25/13/7-3C81-A100
160 8%
143
500
E25/13/7-3C81-A160
250 15%
224
280
E25/13/7-3C81-A250
315 15%
282
210
E25/13/7-3C81-A315
2 460 25%
2200
56
1740
100 8%
99
920
E25/13/7-3C90-A100
160 8%
143
500
E25/13/7-3C90-A160
250 15%
224
280
E25/13/7-3C90-A250
315 15%
282
210
E25/13/7-3C90-A315
63 5%(1)
E25/13/7-3C81-E63
E25/13/7-3C81
E25/13/7-3C90-E63
1 900 25%
1 700
E25/13/7-3C90
3C91
2 460 25%
2200
E25/13/7-3C91
3C92
1450 25%
1280
E25/13/7-3C92
3C94
1 900 25%
1 700
E25/13/7-3C94
3C96
1650 25%
1480
E25/13/7-3C96
2013 Jul 31
244
Ferroxcube
E25/13/7
(EF25)
AL
(nH)
63 5%(1)
100 8%
3F35
TYPE NUMBER
56
1740
E25/13/7-3F3-E63
99
920
E25/13/7-3F3-A100
160 8%
143
500
E25/13/7-3F3-A160
250 15%
224
280
E25/13/7-3F3-A250
315 15%
282
210
E25/13/7-3F3-A315
1650 25%
1 480
E25/13/7-3F3
1250 25%
1 120
E25/13/7-3F3
Note
1. Measured in combination with an equal gapped core half, clamping force for AL measurements, 20 10 N.
Core halves of high permeability grades
Clamping force for A L measurements 20 10 N.
GRADE
3E27
AL
(nH)
AIR GAP
(m)
4 000 25%
3 580
TYPE NUMBER
E25/13/7-3E27
3C81
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
320
0.61
3C90
330
0.35
0.38
3C91
320
0.22(1)
1.2(1)
3C92
370
0.3
1.5
3C94
330
0.3
1.5
3C96
340
0.22
1.2
3F3
320
0.38
0.65
3F35
300
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
3C96
340
1.1
3F3
320
3F35
300
0.4
3.1
GRADE
Note
1. Measured at 60 C.
2013 Jul 31
245
f = 3 MHz;
= 10 mT;
B
T = 100 C
Ferroxcube
E25/13/7
(EF25)
SPECIFICATION
Pin material
Solderability
13 0.15
9.8 0
0.1
17.3 0
0.3
0
17.2 10 0.1
12.7
0.1
12.7
0.8
2.9
6.2
7.8
15.45
19.8
+ 0.1
0
5 0.1
17
MFP179
Dimensions in mm.
WINDING
AREA
(mm 2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
56
15.45
49
2910
2013 Jul 31
246
TYPE NUMBER
CSV-E25/13/7-1S-6P-C
Ferroxcube
E25/13/7
(EF25)
SPECIFICATION
Pin material
Solderability
28.8 max.
28 max.
17.3 0
0.2
17.2 0
0.25
7.6 +0.15
0
0
0.15
15.45 min.
9.1
20.05
max.
1.3
0
0.15
3.5
0.7
CBW029
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
63.3
15.45
52.8
3290
2013 Jul 31
247
TYPE NUMBER
CPH-E25/13/7-1S-10P
Ferroxcube
E25/13/7
(EF25)
REMARKS
FIGURE
handbook, halfpage
27.9 min.
16
6.5
0.3
7.5
CBW030
Dimensions in mm.
2013 Jul 31
248
TYPE NUMBER
CLI-E25/13/7
Ferroxcube
E25/13/11
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.733
mm1
Ve
effective volume
4500
mm3
Ie
effective length
57.5
mm
Ae
effective area
78.4
mm2
Amin
minimum area
78.4
mm2
11
25 +0.8
0.7
handbook, halfpage
17.5 +1.0
0
7.5 0
0.5
8.7 +0.5
0
12.8 0
0.5
R2
11.0
Dimensions in mm.
0
0.5
CBW293
AL
(nH)
TYPE NUMBER
63 5%(1)
37
2800
E25/13/11-3C90-E63
100 8%(1)
58
1480
E25/13/11-3C90-E100
160 8%
93
790
E25/13/11-3C90-A160
250 15%
146
450
E25/13/11-3C90-A250
315 15%
184
340
2800 25%
1 630
E25/13/11-3C90
E25/13/11-3C90-A315
3C92
2200 25%
1 280
E25/13/11-3C92
3C94
2800 25%
1 630
E25/13/11-3C94
3C96
2700 25%
1 580
37
2800
100 8%(1)
58
1480
E25/13/11-3F3-E100
160 8%
93
790
E25/13/11-3F3-A160
250 15%
146
450
E25/13/11-3F3-A250
315 15%
184
340
E25/13/11-3F3-A315
2700 25%
1580
E25/13/11-3F3
2000 25%
1 170
E25/13/11-3F35
3F3
3F35
63 5%(1)
E25/13/11-3C96
E25/13/11-3F3-E63
Note
1. Measured in combination with an equal gapped core half, clamping force for AL measurements, 20 10 N.
2013 Jul 31
249
Ferroxcube
E25/13/11
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
3C90
330
0.55
0.55
3C92
370
0.42
2.4
GRADE
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C94
330
0.42
2.4
3C96
340
0.33
1.9
3F3
320
0.55
0.95
3F35
300
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C90
330
3C92
370
3C94
330
3C96
340
1.7
3F3
320
3F35
300
0.6
4.7
GRADE
2013 Jul 31
250
Ferroxcube
E30/15/7
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
(I/A)
1.12
mm1
Ve
effective volume
4000
mm3
Ie
effective length
67.0
mm
Ae
effective area
60.0
mm2
Amin
minimum area
49.0
mm2
11
30.8 0
1.4
+1.0
19.5
0
7.2 0
0.5
handbook, halfpage
UNIT
9.7
R 0.5
+0.5
0
15
0.2
R1
7.3 0
0.5
CBW032
Dimensions in mm.
Core halves
AL measured in combination with a non-gapped core half, clamping force for AL measurements 20 10 N, unless stated
otherwise.
GRADE
3C81
3C90
AL
(nH)
100 5%(1)
89
TYPE NUMBER
E30/15/7-3C81-E100
160 5%
142
580
E30/15/7-3C81-A160
250 5%
222
330
E30/15/7-3C81-A250
315 5%
280
240
E30/15/7-3C81-A315
400 8%
355
180
E30/15/7-3C81-A400
630 15%
560
100
E30/15/7-3C81-A630
2500 25%
2 220
89
1100
E30/15/7-3C90-E100
160 5%
142
580
E30/15/7-3C90-A160
250 5%
222
330
E30/15/7-3C90-A250
100 5%(1)
E30/15/7-3C81
315 5%
280
240
E30/15/7-3C90-A315
400 8%
355
180
E30/15/7-3C90-A400
E30/15/7-3C90-A630
630 15%
560
100
1900 25%
1 690
E30/15/7-3C90
3C91
2500 25%
2 220
E30/15/7-3C91
3C92
1400 25%
1250
E30/15/7-3C92
3C94
1900 25%
1 690
E30/15/7-3C94
3C96
1600 25%
1 420
E30/15/7-3C96
2013 Jul 31
251
Ferroxcube
GRADE
3F3
E30/15/7
100 5%(1)
160 5%
3F35
TYPE NUMBER
89
1100
E30/15/7-3F3-E100
142
580
E30/15/7-3F3-A160
250 5%
222
330
E30/15/7-3F3-A250
315 5%
280
240
E30/15/7-3F3-A315
400 8%
355
180
E30/15/7-3F3-A400
630 15%
560
100
E30/15/7-3F3-A630
1600 25%
1 420
E30/15/7-3F3
1250 25%
1110
E30/15/7-3F35
Note
1. Measured in combination with an equal gapped core half, clamping force for AL measurements, 20 10 N.
Core halves of high permeability grades
Clamping force for A L measurements 20 10 N.
AL
(nH)
GRADE
AIR GAP
(m)
TYPE NUMBER
3C11
3300 25%
2 930
E30/15/7-3C11
3E27
4100 25%
3 640
E30/15/7-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C81
320
0.82
3C90
330
0.45
0.48
3C91
320
0.27(1)
1.6(1)
3C92
370
0.36
2.0
3C94
330
0.36
2.0
3C96
340
0.27
1.6
3F3
320
0.47
0.80
3F35
300
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
3C96
340
1.5
3F3
320
3F35
300
0.54
4.2
GRADE
Note
1. Measured at 60 C.
2013 Jul 31
252
f = 3 MHz;
= 10 mT;
B
T = 100 C
Ferroxcube
E30/15/7
COIL FORMERS
GENERAL DATA FOR E30/15/7 COIL FORMER WITHOUT PINS
PARAMETER
SPECIFICATION
120 C
20.1
max.
7.5
9 0
0.2
+0.1
0
CBW033
17 min.
19.1 max.
19
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
80
17.0
56
4800
2013 Jul 31
253
TYPE NUMBER
CP-E30/15/7-1S
Ferroxcube
E30/15/7
SPECIFICATION
Pin material
Solderability
19 0
0.3
9.3 0
0.2
19
max.
19 0
0.3
(17.1 min.)
0.8 0
0.1
7.5 +0.2
0
5.08
+0.1
0
3
29.1 max.
0.8 0.02
CBW034
24.1 max.
1.3
+0.15
0
Dimensions in mm.
WINDING
AREA
(mm 2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
80
17.1
56
4800
2013 Jul 31
254
TYPE NUMBER
CSH-E30/15/7-1S-10P
Ferroxcube
E30/15/7
MOUNTING PARTS
General data and ordering information
ITEM
REMARKS
FIGURE
TYPE NUMBER
Clasp
CLA-E30/15/7
Spring
SPR-E30/15/7
10.5
3.9
0.8
7.6
min.
2.5
2.9
7.5 0
0.1
;
;;
;;
;;
;;;;;
8.8 0.1
0.65
0.9
28
CBW036
0.4 (2)
3.3 0
0.15
CBW035
0.5
24
31.1 max.
Dimensions in mm.
Dimensions in mm.
2013 Jul 31
2.2
32.2
0.2
32
12.8
0.6
255
Ferroxcube
E31/13/9
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.740
mm1
Ve
effective volume
5150
mm3
Ie
effective length
61.9
mm
Ae
effective area
83.2
mm2
Amin
minimum area
83.2
mm2
13
30.9 0.5
handbook, halfpage
21.9 min.
9.4
0.25
8.6
min.
13.4
0.15
9.4
0.3
CBW038
Dimensions in mm.
AL
(nH)
100 5%(1)
59
1560
E31/13/9-3C90-E100
160 5%(1)
95
840
E31/13/9-3C90-E160
TYPE NUMBER
250 5%
148
480
E31/13/9-3C90-A250
315 5%
186
360
E31/13/9-3C90-A315
E31/13/9-3C90-A400
400 8%
237
270
630 15%
373
150
2970 25%
1 760
E31/13/9-3C90-A630
E31/13/9-3C90
Note
1. Measured in combination with an equal gapped core half, clamping force for AL measurements, 40 20 N.
Properties of core sets under power conditions
B (mT) at
GRADE
3C90
2013 Jul 31
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
320
0.52
0.58
256
Ferroxcube
E32/16/9
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
(I/A)
0.894
mm1
Ve
effective volume
6180
mm3
Ie
effective length
74
mm
Ae
effective area
83
mm2
Amin
minimum area
83
mm2
16
32
handbook, halfpage
UNIT
+0.9
0.7
+1.2
0
9.5 0
0.6
22.7
11.2
+0.6
0
16.4 0
0.4
R2.5
9.5 0
0.7
CBW039
Dimensions in mm.
AL
(nH)
TYPE NUMBER
100 5%(1)
71
1600
E32/16/9-3C90-E100
160 5%(1)
114
860
E32/16/9-3C90-E160
250 5%
177
480
E32/16/9-3C90-A250
315 5%
223
360
E32/16/9-3C90-A315
400 8%
284
260
E32/16/9-3C90-A400
630 15%
447
150
E32/16/9-3C90-A630
2500 25%
1 770
E32/16/9-3C90
3C92
1850 25%
1320
E32/16/9-3C92
3C94
2500 25%
1 770
E32/16/9-3C94
3C96
2300 25%
1630
E32/16/9-3C96
2013 Jul 31
257
Ferroxcube
AL
(nH)
GRADE
3F3
3F35
1.
E32/16/9
TYPE NUMBER
100 5%(1)
71
1600
E32/16/9-3F3-E100
160 5%(1)
114
860
E32/16/9-3F3-E160
250 5%
177
480
E32/16/9-3F3-A250
315 5%
223
360
E32/16/9-3F3-A315
400 8%
284
260
E32/16/9-3F3-A400
630 15%
447
150
E32/16/9-3F3-A630
2300 25%
1 630
E32/16/9-3F3
1700 25%
1210
E32/16/9-3F35
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C90
330
0.65
0.7
3C92
370
0.55
3.2
3C94
330
0.55
3.2
3C96
340
0.43
2.5
3F3
320
0.75
1.3
3F35
300
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C90
330
3C92
370
3C94
330
3C96
340
2.3
3F3
320
3F35
300
0.83
6.5
GRADE
2013 Jul 31
258
Ferroxcube
E32/16/9
COIL FORMER
General data for 12-pins E32/16/9 coil former
PARAMETER
SPECIFICATION
Pin material
Solderability
1.3 +0.15
0
25.5
22.4 0
0.3
9.8 +0.2
0
11.5 0.1
5.08
23.85
max.
2.5
3.5
20.2 min.
0.8
21.8 0.1
32.2 min.
29.55 max.
CBW040
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
97
20.2
60
8050
2013 Jul 31
259
TYPE NUMBER
CPH-E32/16/9-1S-12P
Ferroxcube
E34/14/9
(E375)
34.3 0.6
handbook, halfpage
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.850
mm1
Ve
effective volume
5590
mm3
Ie
effective length
69.3
mm
Ae
effective area
80.7
mm2
Amin
minimum area
80.7
mm2
14
25.5 min.
9.3 0.2
9.8
0.13
14.1
0.15
9.3
0.25
CBW041
Dimensions in mm.
3C90
AL
(nH)
TYPE NUMBER
100 5%(1)
68
1520
160 5%(1)
109
820
E34/14/9-3C81-E160
250 5%
171
460
E34/14/9-3C81-A250
E34/14/9-3C81-E100
315 5%
215
350
E34/14/9-3C81-A315
400 8%
273
260
E34/14/9-3C81-A400
630 15%
431
140
E34/14/9-3C81-A630
3200 25%
2 190
100 5%(1)
68
1520
160 5%(1)
109
820
E34/14/9-3C90-E160
250 5%
171
460
E34/14/9-3C90-A250
E34/14/9-3C81
E34/14/9-3C90-E100
315 5%
215
350
E34/14/9-3C90-A315
400 8%
273
260
E34/14/9-3C90-A400
E34/14/9-3C90-A630
630 15%
431
140
2440 25%
1 670
E34/14/9-3C90
3C91
3200 25%
2 190
E34/14/9-3C91
3C92
1850 25%
1250
E34/14/9-3C92
3C94
2440 25%
1 760
E34/14/9-3C94
3C96
2125 25%
1 450
E34/14/9-3C96
2013 Jul 31
260
Ferroxcube
E34/14/9
(E375)
AL
(nH)
GRADE
3F3
3F35
TYPE NUMBER
100 5%(1)
68
1520
E34/14/9-3F3-E100
160 5%(1)
109
820
E34/14/9-3F3-E160
250 5%
171
460
E34/14/9-3F3-A250
315 5%
215
350
E34/14/9-3F3-A315
400 8%
273
260
E34/14/9-3F3-A400
630 15%
431
140
E34/14/9-3F3-A630
2125 25%
1 450
E34/14/9-3F3
1680 25%
1150
E34/14/9-3F35
Note
1. Measured in combination with an equal gapped core half, clamping force for AL measurements, 40 20 N.
Properties of core sets under power conditions
B (mT) at
GRADE
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C81
320
1.2
3C90
320
0.56
0.63
3C91
320
0.38(1)
2.3(1)
3C92
370
0.5
2.9
3C94
320
0.5
2.9
3C96
340
0.38
2.3
3F3
320
0.62
1.1
3F35
300
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C96
340
2.1
3F3
320
3F35
300
0.75
5.9
GRADE
Note
1. Measured at 60 C.
2013 Jul 31
261
Ferroxcube
E34/14/9
(E375)
SPECIFICATION
18.8 max.
17.1
25.15
max.
9.8
min.
11.5
CBW042
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm 2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
111
17.1
67.0
8960
2013 Jul 31
262
TYPE NUMBER
CP-E34/14/9-1S
Ferroxcube
E34/14/9
(E375)
SPECIFICATION
Pin material
Solderability
25.15 max.
18.6 max.
9.6 min.
16.5
25.65
max.
11.85
4.05 min.
0.65
3.8
(1)
CBW043
21.9
5.1
27.2 max.
37.75 max.
(1) one place only
2.15 min.
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
102
16.5
69.0
8230
CPH-E34/14/9-1S-12PD-Z
2013 Jul 31
263
Ferroxcube
E35/18/10
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
(I/A)
0.807
mm1
Ve
effective volume
8070
mm3
Ie
effective length
80.7
mm
100
mm2
Ae
effective area
Amin
minimum area
100
mm2
20
35 0.5
handbook, halfpage
UNIT
24.5 min.
10 0.3
handbook, halfpage
12.5
0.25
17.5
0.25
R1
10 0.3
CBW559
Dimensions in mm.
3C95
AL
(nH)
TYPE NUMBER
100 5%(1)
64
2000
E35/18/10-3C90-E100
160 5%(1)
103
1060
E35/18/10-3C90-E160
250 5%
161
590
E35/18/10-3C90-A250
315 5%
202
440
E35/18/10-3C90-A315
400 8%
257
330
E35/18/10-3C90-A400
630 15%
405
180
E35/18/10-3C90-A630
2500 25%
1 610
E35/18/10-3C90
2980 25%
1915
E35/18/10-3C95
Note
1. Measured in combination with an equal gapped core half, clamping force for AL measurements, 30 15 N.
Properties of core sets under power conditions
B (mT) at
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 100 kHz;
= 200 mT;
B
T = 100 C
T = 25 C
T = 100 C
3C90
330
0.95
1.1
3C95
330
4.76
4.52
GRADE
2013 Jul 31
264
Ferroxcube
E36/21/12
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
(I/A)
0.762
mm1
Ve
effective volume
12160
mm3
Ie
effective length
96
mm
Ae
effective area
126
mm2
Amin
minimum area
121
mm2
31
36 0.7
handbook, halfpage
UNIT
24.5 +1.2
0
10.2 0
0.5
handbook, halfpage
15.75
12
+0.6
0
21.75
0
0.4
0
0.6
CBW560
Dimensions in mm.
AL
(nH)
100 5%(1)
61
2720
160 5%(1)
97
1400
E36/21/12-3C90-E160
152
770
E36/21/12-3C90-A250
250 5%
TYPE NUMBER
E36/21/12-3C90-E100
315 5%
191
570
E36/21/12-3C90-A315
400 8%
243
420
E36/21/12-3C90-A400
630 15%
382
230
2650 25%
1 610
E36/21/12-3C90-A630
E36/21/12-3C90
Note
1. Measured in combination with an equal gapped core half, clamping force for AL measurements, 40 20 N.
Properties of core sets under power conditions
B (mT) at
GRADE
3C90
2013 Jul 31
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
330
1.4
1.5
265
Ferroxcube
E41/17/12
CORE SETS
Effective core parameters
40.6 0.65
handbook, halfpage
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.517
mm1
Ve
effective volume
11500
mm3
Ie
effective length
77.0
mm
Ae
effective area
149
mm2
Amin
minimum area
142
mm2
30
28.6 min.
12.45 0.25
10.4
min 16.6
0.2
12.4
0.3
CBW045
Dimensions in mm.
3C90
AL
(nH)
100 5%(1)
41
3000
E41/17/12-3C81-E100
160 5%(1)
66
1620
E41/17/12-3C81-E160
250 5%(1)
103
920
E41/17/12-3C81-E250
TYPE NUMBER
315 5%
130
690
E41/17/12-3C81-A315
400 8%
164
520
E41/17/12-3C81-A400
630 15%
259
300
5370 25%
2 210
100 5%(1)
41
3000
E41/17/12-3C90-E100
160 5%(1)
66
1620
E41/17/12-3C90-E160
250 5%(1)
103
920
E41/17/12-3C90-E250
315 5%
130
690
E41/17/12-3C90-A315
E41/17/12-3C90-A400
E41/17/12-3C81-A630
E41/17/12-3C81
400 8%
164
520
630 15%
259
300
4100 25%
1 670
E41/17/12-3C90
3C91
5370 25%
2 210
E41/17/12-3C91
3C92
3300 25%
1360
E41/17/12-3C92
3C94
4100 25%
1670
E41/17/12-3C94
3C95
5370 25%
2 210
E41/17/12-3C95
2013 Jul 31
266
E41/17/12-3C90-A630
Ferroxcube
AL
(nH)
100 5%(1)
41
3000
E41/17/12-3F3-E100
160 5%(1)
66
1620
E41/17/12-3F3-E160
5%(1)
103
920
E41/17/12-3F3-E250
GRADE
3F3
E41/17/12
250
TYPE NUMBER
315 5%
130
690
E41/17/12-3F3-A315
400 8%
164
520
E41/17/12-3F3-A400
630 15%
259
300
3575 25%
1 470
E41/17/12-3F3-A630
E41/17/12-3F3
Note
1. Measured in combination with an equal gapped core half, clamping force for AL measurements, 40 20 N.
Properties of core sets under power conditions
B (mT) at
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 100 kHz;
= 200 mT;
B
3C81
320
2.4
3C90
320
1.3
1.45
3C91
320
0.85(1)
5.1 (1)
GRADE
T = 100 C
T = 25 C
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C92
370
1.1
6.4
3C94
320
1.1
6.4
3C95
320
7.25
6.9
3F3
320
1.4
2.2
Note
1. Measured at 60 C.
2013 Jul 31
267
Ferroxcube
E41/17/12
COIL FORMERS
General data for E41/17/12 coil former without pins
PARAMETER
SPECIFICATION
20.35 max.
18.65
28.3
max.
12.8
min.
14.5
CBW046
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
120
18.6
79.6
17900
2013 Jul 31
268
TYPE NUMBER
CP-E41/17/12-1S
Ferroxcube
E41/17/12
SPECIFICATION
Pin material
Solderability
20.7
28.1 max.
13.1 max.
18.7
28.7
14.7
0.25
4.3
0.64
5.1
(1)
6.35
24.13
45.21
29.2
2.4 min.
CBW047
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
114
18
81.2
17000
2013 Jul 31
269
TYPE NUMBER
CPH-E41/12-1S-12PD-Z
Ferroxcube
E42/21/15
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
43 0
1.7
29.5 +1.4
0
12.2 0
0.5
handbook, halfpage
VALU
E
UNIT
(I/A)
0.548
mm1
Ve
effective volume
17300
mm3
Ie
effective length
97.0
mm
Ae
effective area
178
mm2
Amin
minimum area
175
mm2
44
R 0.6
14.8
+0.6
0
21
0.2
R2
15.2 0
0.6
CBW048
Dimensions in mm.
3C90
AL
(nH)
100 5%(1)
43
3960
160 5%(1)
69
2060
E42/21/15-3C81-E160
250 5%(1)
108
1140
E42/21/15-3C81-E250
TYPE NUMBER
E42/21/15-3C81-E100
315 5%
137
850
E42/21/15-3C81-A315
400 8%
173
630
E42/21/15-3C81-A400
630 15%
273
360
E42/21/15-3C81-A630
5300 25%
2 300
100 5%(1)
43
3960
160 5%(1)
69
2060
E42/21/15-3C90-E160
250 5%(1)
108
1140
E42/21/15-3C90-E250
E42/21/15-3C81
E42/21/15-3C90-E100
315 5%
137
850
E42/21/15-3C90-A315
400 8%
173
630
E42/21/15-3C90-A400
630 15%
273
360
3950 25%
1 710
E42/21/15-3C90
3C91
5300 25%
2 300
E42/21/15-3C91
3C92
3100 25%
1 350
E42/21/15-3C92
3C94
4100 25%
1780
E42/21/15-3C94
2013 Jul 31
270
E42/21/15-3C90-A630
Ferroxcube
AL
(nH)
GRADE
3C95
3F3
E42/21/15
5300 25%
TYPE NUMBER
2300
5%(1)
43
3960
160 5%(1)
69
2060
E42/21/15-3F3-E160
250 5%(1)
108
1140
E42/21/15-3F3-E250
100
E42/21/15-3C95
E42/21/15-3F3-E100
315 5%
137
850
E42/21/15-3F3-A315
400 8%
173
630
E42/21/15-3F3-A400
630 15%
273
360
3600 25%
1 560
E42/21/15-3F3-A630
E42/21/15-3F3
Note
1. Measured in combination with an equal gapped core half, clamping force for AL measurements, 40 20 N.
Properties of core sets under power conditions
B (mT) at
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C81
320
3.6
3C90
320
1.9
2.2
3C91
320
1.3 (1)
7.01)
3C92
370
1.7
8.8
GRADE
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C94
320
1.7
8.8
3C95
320
10.9
10.4
3F3
320
2.2
3.8
Note
1. Measured at 60 C.
2013 Jul 31
271
Ferroxcube
E42/21/15
COIL FORMERS
General data for E42/21/15 coil former without pins
PARAMETER
SPECIFICATION
29 max.
30.8 max.
34
max.
15.7
+0.2
17.9
CBW494
12.6 +0.2
26.2 min.
14.6
28
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
178
26.2
93
31700
2013 Jul 31
272
TYPE NUMBER
CP-E42/21/15-1S
Ferroxcube
E42/21/15
SPECIFICATION
Pin material
Solderability
32 0.2
5.08
29.2 max.
15 0
0.2
12.6 +0.2
0
28 0.1
25.5 min.
8.05
18
34.2
15.7 +0.2 max.
0
0
0.3
1.3
5
+0.15
0
6.5 0.2
0.4
5 0.2
CBW050
39 max.
1.1
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
178
25.5
93
31700
2013 Jul 31
273
TYPE NUMBER
CPH-E42/21/15-1S-10P
Ferroxcube
E42/21/15
SPECIFICATION
Pin material
Solderability
29.2 max.
14.4
28.15 max.
12.6 min.
26.3
15.5
min.
35.2
max.
17.5
6.85
min.
5
0.4
1.15
35
38.5 max.
CBW051
3.55 min.
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
180
26.3
87
32000
CPH-E42/15-1S-10PD-A-Z
2013 Jul 31
274
Ferroxcube
E42/21/15
MOUNTING PARTS
General data for mounting parts
ITEM
REMARKS
FIGURE
TYPE NUMBER
Clasp
CLA-E42/21/15
Spring
SPR-E42/21/15
2.5
17.6
26
20.32
38.1
45.4 max.
CBW052
34
4.7
Dimensions in mm.
4.4
47.9 max.
3.4
3
0.2 min.
47 0
0.2
42.5
15.3
max.
36
Dimensions in mm.
2013 Jul 31
275
CBW053
Ferroxcube
E42/21/20
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.417
mm1
Ve
effective volume
22700
mm3
Ie
effective length
97.0
mm
Ae
effective area
233
mm2
Amin
minimum area
233
mm2
56
43 0
1.7
+1.4
29.5
0
12.2 0
0.5
handbook, halfpage
14.8 +0.6
0 21
0.2
R < 0.6
R2
20 0
0.8
CBW054
Dimensions in mm.
100 5%(1)
33
5320
E42/21/20-3C81-E100
160 5%(1)
53
2800
E42/21/20-3C81-E160
TYPE NUMBER
5%(1)
83
1540
E42/21/20-3C81-E250
315 5%(1)
104
1160
E42/21/20-3C81-E315
250
3C90
AL
(nH)
400 8%
133
850
E42/21/20-3C81-A400
630 15%
209
490
E42/21/20-3C81-A630
6950 25%
2 300
100 5%(1)
33
5320
E42/21/20-3C90-E100
160 5%(1)
53
2800
E42/21/20-3C90-E160
250 5%(1)
83
1540
E42/21/20-3C90-E250
315
5%(1)
400 8%
E42/21/20-3C81
104
1160
E42/21/20-3C90-E315
133
850
E42/21/20-3C90-A400
E42/21/20-3C90-A630
630 15%
209
490
5000 25%
1 660
E42/21/20-3C90
3C91
6950 25%
2 300
E42/21/20-3C91
3C92
4100 25%
1 360
E42/21/20-3C92
3C94
5200 25%
1720
E42/21/20-3C94
2013 Jul 31
276
Ferroxcube
AL
(nH)
GRADE
3C95
3F3
E42/21/20
6950 25%
TYPE NUMBER
2300
5%(1)
33
5320
E42/21/20-3F3-E100
160 5%(1)
53
2800
E42/21/20-3F3-E160
250 5%(1)
83
1540
E42/21/20-3F3-E250
315 5%(1)
104
1160
E42/21/20-3F3-E315
E42/21/20-3F3-A400
100
400 8%
133
850
630 15%
209
490
4600 25%
1 520
E42/21/20-3C95
E42/21/20-3F3-A630
E42/21/20-3F3
Note
1. Measured in combination with an equal gapped core half.
Properties of core sets under power conditions
B (mT) at
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C81
320
4.7
3C90
320
2.4
3C91
320
3C92
370
GRADE
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
2.9
1.8(1)
9.4 (1)
2.3
12
3C94
320
2.3
12
3C95
320
14.3
13.6
3F3
320
2.7
5.0
Note
1. Measured at 60 C.
2013 Jul 31
277
Ferroxcube
E42/21/20
COIL FORMER
General data for E42/21/20 coil former
PARAMETER
SPECIFICATION
29.3 max.
12.2
min.
25.9
37.5 20.1
max. min.
23.45
CBW055
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
173
25.9
100
40300
2013 Jul 31
278
TYPE NUMBER
CP-E42/21/20-1S
Ferroxcube
E42/21/20
SPECIFICATION
Pin material
Solderability
34.2 max.
14.65
28.1 max.
12.6 min.
26.3
20.1
min.
39.85
max.
22.35
6.8
min.
5
0.4
1.15
34.9
CBW056
38.55 max.
3.5 min.
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm 2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
255
26.3
78.5
59400
2013 Jul 31
279
TYPE NUMBER
CPH-E42/20-1S-12PD-Z
Ferroxcube
E42/33/20
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.614
mm1
Ve
effective volume
34200
mm3
Ie
effective length
145
mm
Ae
effective area
236
mm2
Amin
minimum area
234
mm2
82
42 +1
0.7
29.5 +1.4
0
0
12.2
0.5
handbook, halfpage
26 +1
0
20
32.8 0
0.4
0
0.8
CBW057
Dimensions in mm.
AL
(nH)
TYPE NUMBER
100 5%(1)
49
5480
E42/33/20-3C90-E100
160 5%(1)
78
2840
E42/33/20-3C90-E160
250 5%(1)
122
1540
E42/33/20-3C90-E250
315 5%
154
1140
E42/33/20-3C90-A315
400 8%
196
840
E42/33/20-3C90-A400
630 15%
308
470
E42/33/20-3C90-A630
4000 25%
1 960
E42/33/20-3C90
3C92
2900 25%
1420
E42/33/20-3C92
3C94
4000 25%
1 960
E42/33/20-3C94
3C95
4990 25%
2440
E42/33/20-3C95
100 5%(1)
49
5480
E42/33/20-3F3-E100
160 5%(1)
78
2840
E42/33/20-3F3-E160
3F3
122
1540
E42/33/20-3F3-E250
315 5%
154
1140
E42/33/20-3F3-A315
250
1.
5%(1)
400 8%
196
840
E42/33/20-3F3-A400
630 15%
308
470
E42/33/20-3F3-A630
3700 25%
1 810
2013 Jul 31
280
E42/33/20-3F3
Ferroxcube
E42/33/20
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 400 kHz;
= 50 mT;
B
T = 100 C
T = 25 C
T = 100 C
T = 100 C
3C90
330
3.6
4.2
3C92
370
3.4
20
GRADE
3C94
330
3.4
20
3C95
330
21.5
20.5
3F3
320
4.0
7.3
2013 Jul 31
281
Ferroxcube
E47/20/16
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
46.9 0.8
handbook, halfpage
32.4 0.65
VALUE
UNIT
(I/A)
0.380
mm1
Ve
effective volume
20800
mm3
Ie
effective length
88.9
mm
Ae
effective area
234
mm2
Amin
minimum area
226
mm2
53
15.6
0.25
12.1
min. 19.6
0.2
15.6
0.25
Dimensions in mm.
CBW059
AL
(nH)
100 5%(1)
30
5080
E47/20/16-3C81-E100
160 5%(1)
48
2720
E47/20/16-3C81-E160
250 5%(1)
76
1540
E47/20/16-3C81-E250
315 5%(1)
95
1140
E47/20/16-3C81-E315
400 8%(1)
121
860
E47/20/16-3C81-E400
630 10%
190
490
E47/20/16-3C81-A630
7540 25%
TYPE NUMBER
2 280
100 5%(1)
30
5080
E47/20/16-3C90-E100
160 5%(1)
48
2720
E47/20/16-3C90-E160
250 5%(1)
76
1540
E47/20/16-3C90-E250
315 5%(1)
95
1140
E47/20/16-3C90-E315
400 8%(1)
121
860
E47/20/16-3C90-E400
630 10%
190
490
E47/20/16-3C90-A630
5500 25%
1 660
E47/20/16-3C90
3C91
7540 25%
2 280
E47/20/16-3C91
3C92
4400 25%
1330
E47/20/16-3C92
3C94
5600 25%
1 690
E47/20/16-3C94
3C95
7540 25%
2 280
E47/20/16-3C95
3C90
2013 Jul 31
282
E47/20/16-3C81
Ferroxcube
AL
(nH)
100 5%(1)
30
5080
E47/20/16-3F3-E100
160 5%(1)
48
2720
E47/20/16-3F3-E160
250
5%(1)
76
1540
E47/20/16-3F3-E250
315
5%(1)
95
1140
E47/20/16-3F3-E315
400 8%(1)
121
860
E47/20/16-3F3-E400
630 10%
190
490
E47/20/16-3F3-A630
5100 25%
1 540
GRADE
3F3
E47/20/16
TYPE NUMBER
E47/20/16-3F3
Note
1. Measured in combination with an equal gapped core half.
Properties of core sets under power conditions
B (mT) at
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 100 kHz;
= 200 mT;
B
3C81
320
4.3
3C90
320
2.3
2.7
3C91
320
1.7(1)
8.8(1)
GRADE
T = 100 C
T = 25 C
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C92
370
2.1
11
3C94
320
2.1
11
3C95
320
13.1
12.5
3F3
320
2.5
4.0
Note
1. Measured at 60 C.
2013 Jul 31
283
Ferroxcube
E47/20/16
COIL FORMERS
General data for E47/20/16 coil former without pins
PARAMETER
SPECIFICATION
23.5 max.
21.6
31.75
max.
16.35
min.
18.3
CBW060
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
130
21.6
93.3
30400
2013 Jul 31
284
TYPE NUMBER
CP-E47/20/16-1S
Ferroxcube
E47/20/16
SPECIFICATION
Pin material
Solderability
23.5 max.
31.5 max.
16 min.
21.4
18.3
32.3
max.
1.3
4.3 min.
0.65
5.1
(1)
7.6
27.95
45.1 max.
33.7 max.
3 min.
CBW061
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm 2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
131
21.4
94.7
30650
2013 Jul 31
285
TYPE NUMBER
CPH-E47/16-1S-12PD-Z
Ferroxcube
E55/28/21
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
(I/A)
0.350
mm1
Ve
effective volume
44000
mm3
Ie
effective length
124
mm
Ae
effective area
353
mm2
Amin
minimum area
345
mm2
108
56.2 0
2.1
+1.5
37.5
0
17.2 0
0.5
handbook, halfpage
UNIT
R < 0.6
18.5
+0.8
0
27.5
0.3
R3
21.0
0
0.8
CBW063
Dimensions in mm.
100 5%(1)
28
8740
E55/28/21-3C81-E100
160 5%(1)
45
4560
E55/28/21-3C81-E160
5%(1)
70
2500
E55/28/21-3C81-E250
315 5%(1)
88
1840
E55/28/21-3C81-E315
400 8%(1)
112
1360
E55/28/21-3C81-E400
250
630 10%(1)
TYPE NUMBER
176
780
2410
100 5%(1)
28
8740
E55/28/21-3C90-E100
160 5%(1)
45
4560
E55/28/21-3C90-E160
250 5%(1)
70
2500
E55/28/21-3C90-E250
8625 25%
3C90
AL
(nH)
E55/28/21-3C81-E630
E55/28/21-3C81
5%(1)
88
1840
E55/28/21-3C90-E315
400 8%(1)
112
1360
E55/28/21-3C90-E400
315
630 10%(1)
176
780
6300 25%
1760
E55/28/21-3C90
3C91
8625 25%
2410
E55/28/21-3C91
3C92
4700 25%
1310
E55/28/21-3C92
3C94
6400 25%
1790
E55/28/21-3C94
2013 Jul 31
286
E55/28/21-3C90-E630
Ferroxcube
AL
(nH)
GRADE
3C95
3F3
E55/28/21
8625 25%
TYPE NUMBER
2410
5%(1)
28
8740
E55/28/21-3F3-E100
160 5%(1)
45
4560
E55/28/21-3F3-E160
250 5%(1)
70
2500
E55/28/21-3F3-E250
315 5%(1)
88
1840
E55/28/21-3F3-E315
400 8%(1)
112
1360
E55/28/21-3F3-E400
176
780
1 590
100
630 10%(1)
5700 25%
E55/28/21-3C95
E55/28/21-3F3-E630
E55/28/21-3F3
Note
1. Measured in combination with an equal gapped core half.
Properties of core sets under power conditions
B (mT) at
GRADE
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C81
320
9.0
3C90
320
4.8
5.9
3C91
320
3.5 (1)
20(1)
3C92
370
3.8
27
3C94
320
3.8
27
3C95
320
27.7
26.4
3F3
320
5.6
10
Note
1. Measured at 60 C.
2013 Jul 31
287
Ferroxcube
E55/28/21
COIL FORMERS
General data for E55/28/21 coil former without pins
PARAMETER
SPECIFICATION
3 0.1
(5)
2 0.1
(6)
5 0.1
20 0
0.2
1 0.1
CBW064
+0.2
33.2
0
35.7 0.1
+0.2
17.6
0
24.2 0.2
37 0
0.2
38.8 0.2
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
250
33.2
116
88250
2013 Jul 31
288
TYPE NUMBER
CP-E55/28/21-1S
Ferroxcube
E55/28/21
SPECIFICATION
36.6
37
19
33.7
16.9
42.15 21.1
max. min.
CBW065
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
277
33.7
113
97800
2013 Jul 31
289
TYPE NUMBER
CP-E55/28/21-1S-A
Ferroxcube
E55/28/21
SPECIFICATION
Pin material
Solderability
37.35 max.
19.75
35.65 max.
17.45 min.
33
21.15
min.
44.2
max.
23.7
7.4
min.
5
0.4
1.15
40.15
CBW066
43.95 max.
4.3 min.
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
278
33
119
98100
CPH-E55/28/21-1S-14P-Z
2013 Jul 31
290
Ferroxcube
E55/28/21
MOUNTING PARTS
ITEM
REMARKS
FIGURE
TYPE NUMBER
Clasp
CLA-E55/28/21
Spring
SPR-E55/28/21
58.8 max.
handbook, full pagewidth
35
23.5
21
27.94
2.8
50.8
44
4
9
Dimensions in mm.
65.3 max.
6.8
+0.5
0
0.2
min.
21 0.2
60.2 0.2
46
56.1
CBW068
4.2
24.3
Dimensions in mm.
2013 Jul 31
291
CBW495
Ferroxcube
E55/28/25
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.239
mm1
Ve
effective volume
52000
mm3
Ie
effective length
123
mm
Ae
effective area
420
mm2
Amin
minimum area
411
mm2
130
56.2 0
2.1
+1.5
37.5
0
0
17.2
0.5
andbook, halfpage
18.5 +0.8
0
27.5
0.3
R < 0.6
R3
25 0
0.8
CBW069
Dimensions in mm.
AL
(nH)
100 5%(1)
23
10440
E55/28/25-3C90-E100
160 5%(1)
37
5520
E55/28/25-3C90-E160
250 5%(1)
58
3040
E55/28/25-3C90-E250
315 5%(1)
73
2240
E55/28/25-3C90-E315
400 8%(1)
93
1660
E55/28/25-3C90-E400
10%(1)
TYPE NUMBER
147
940
8000 25%
1860
E55/28/25-3C90
3C92
5800 25%
1100
E55/28/25-3C92
3C94
8000 25%
1860
E55/28/25-3C94
3C95
9860 25%
2300
E55/28/25-3C95
100 5%(1)
23
10440
E55/28/25-3F3-E100
160 5%(1)
37
5520
E55/28/25-3F3-E160
250 5%(1)
58
3040
E55/28/25-3F3-E250
5%(1)
73
2240
E55/28/25-3F3-E315
400 8%(1)
93
1660
E55/28/25-3F3-E400
630 10%(1)
147
940
E55/28/25-3F3-E630
1 730
630
3F3
315
7400 25%
Note
2013 Jul 31
292
E55/28/25-3C90-E630
E55/28/25-3F3
Ferroxcube
E55/28/25
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
3C90
330
5.7
7.3
3C92
370
4.8
3C94
330
4.8
3C95
330
3F3
310
6.6
GRADE
2013 Jul 31
293
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
31
31
32.8
31.2
12.7
T = 100 C
Ferroxcube
E56/24/19
(E75)
56.1 1
handbook, halfpage
SYMBOL
PARAMETER
VALUE
38.1 min.
18.8
0.25
UNIT
(I/A)
0.320
mm1
Ve
effective volume
36000
mm3
Ie
effective length
107
mm
mm2
Ae
effective area
337
Amin
minimum area
337
mm2
90
14.6
0.13 23.6
0.25
18.8
0.25
CBW070
Dimensions in mm.
AL
(nH)
100 5%(1)
25
7780
E56/24/19-3C81-E100
160 5%(1)
40
4160
E56/24/19-3C81-E160
250 5%(1)
63
2320
E56/24/19-3C81-E250
315 5%(1)
80
1720
E56/24/19-3C81-E315
400 8%(1)
101
1280
E56/24/19-3C81-E400
630 10%(1)
TYPE NUMBER
159
740
2400
100 5%(1)
25
7780
E56/24/19-3C90-E100
160 5%(1)
40
4160
E56/24/19-3C90-E160
250 5%(1)
63
2320
E56/24/19-3C90-E250
315 5%(1)
80
1720
E56/24/19-3C90-E315
400 8%(1)
101
1280
E56/24/19-3C90-E400
630 10%(1)
159
740
E56/24/19-3C90-E630
9500 25%
3C90
E56/24/19-3C81-E630
E56/24/19-3C81
6900 25%
1 740
E56/24/19-3C90
3C91
9500 25%
2400
E56/24/19-3C91
3C92
5200 25%
1320
E56/24/19-3C92
3C94
6900 25%
1 740
E56/24/19-3C94
3C95
9500 25%
2400
E56/24/19-3C95
Note
1. Measured in combination with an equal gapped core half.
2013 Jul 31
294
Ferroxcube
E56/24/19
(E75)
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
3C81
320
7.4
3C90
320
3.6
4.8
3C91
320
2.7 (1)
16(1)
3C92
370
3.6
22
GRADE
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C94
320
3.6
22
3C95
320
22.7
21.6
Note
1. Measured at 60 C.
2013 Jul 31
295
Ferroxcube
E56/24/19
(E75)
SPECIFICATION
28.3 max.
26
38
max.
19.1
min.
21.4
CBW071
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
222
26.1
112
74800
2013 Jul 31
296
TYPE NUMBER
CP-E56/24/19-1S
Ferroxcube
E56/24/19
(E75)
SPECIFICATION
Pin material
Solderability
37.75 max.
28.19
19.3 min.
26.15
37.6
21.4
0.5
4.3 min.
0.64
5.1
(1)
7.6
33
44.45
38.15 max.
2.8
CBW072
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
205
26.2
114
69100
CPH-E56/24/19-1S-12PD-Z
2013 Jul 31
297
Ferroxcube
E65/32/27
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
(I/A)
0.274
mm1
Ve
effective volume
79000
mm3
Ie
effective length
147
mm
Ae
effective area
540
mm2
Amin
minimum area
530
mm2
205
+1.5
1.2
+1.8
44.2
0
20 0
0.7
65
handbook, halfpage
UNIT
R 0.5
22.2
+0.8
0
32.8 0
0.6
R3
27.4 0
0.8
CBW073
Dimensions in mm.
AL
(nH)
100 5%(1)
22
14380
E65/32/27-3C90-E100
160 5%(1)
35
7560
E65/32/27-3C90-E160
250 5%(1)
54
4100
E65/32/27-3C90-E250
5%(1)
68
3020
E65/32/27-3C90-E315
400 8%(1)
87
2200
E65/32/27-3C90-E400
630 10%(1)
136
1240
E65/32/27-3C90-E630
315
3C92
TYPE NUMBER
8600 25%
1860
E65/32/27-3C90
6000 25%
1310
E65/32/27-3C92
3C94
8600 25%
1860
E65/32/27-3C94
3C95
10600 25%
2300
E65/32/27-3C95
100 5%(1)
22
14380
E65/32/27-3F3-E100
5%(1)
35
7560
E65/32/27-3F3-E160
250 5%(1)
54
4100
E65/32/27-3F3-E250
315 5%(1)
68
3020
E65/32/27-3F3-E315
400 8%(1)
87
2200
E65/32/27-3F3-E400
630 10%(1)
136
1240
E65/32/27-3F3-E630
1 580
3F3
160
7300 25%
Note
2013 Jul 31
298
E65/32/27-3F3
Ferroxcube
E65/32/27
AL
(nH)
AIR GAP
(m)
16700 25%
3620
TYPE NUMBER
E65/32/27-3C11
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
3C90
320
9.1
12
3C92
370
8.5
47
GRADE
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C94
320
8.5
47
3C95
320
49.8
47.4
3F3
320
10.5
21
2013 Jul 31
299
Ferroxcube
E65/32/27
COIL FORMER
General data for E65/32/27 coil former without pins
PARAMETER
SPECIFICATION
3 0.1
(6)
2 0.1
5 0.1
0
0
53
27.7 +0.2 30
0.2
0.3
0
23 0.1
1.2 0.1
20.6 +0.2
0
23.5 0.2
0
44
0.3
CBW074
39.2 min.
42 0.2
46 0.2
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm 2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
394
39.2
150
213000
2013 Jul 31
300
TYPE NUMBER
CP-E65-1S-T
Ferroxcube
E65/32/27
MOUNTING PARTS
General data for mounting parts
ITEM
REMARKS
FIGURE
TYPE NUMBER
Clasp
CLA-E65/32/27
Spring
SPR-E65/32/27
58.42 0.2
2.8
14
30
0.3
14
42.8
35.56 0.2
27
4
11
52
0.9
MFW048
68.5
0.3
0.6
76 0.4
Dimensions in mm.
7 1
27.5 0.2
0.8 min
55
0.5
70.5
0.2
66.1
0.2
MFW049
4 0.3
Dimensions in mm.
2013 Jul 31
301
Ferroxcube
E71/33/32
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
70.5 1
handbook, halfpage
VALUE
+1.5
0
22 0
0.7
UNIT
48
mm1
(I/A)
0.218
Ve
effective volume
102000 mm3
Ie
effective length
149
mm
683
mm2
Ae
effective area
Amin
minimum area
676
mm2
260
21.9 +0.7
0
33.2 0
0.5
32 0
0.8
CBW077
Dimensions in mm.
AL
(nH)
100 5%(1)
17
17800
E71/33/32-3C90-E100
160 5%(1)
28
9620
E71/33/32-3C90-E160
250 5%(1)
43
5280
E71/33/32-3C90-E250
315 5%(1)
55
3900
E71/33/32-3C90-E315
400 8%(1)
69
2860
E71/33/32-3C90-E400
109
1620
1880
630
10%(1)
10800 25%
TYPE NUMBER
E71/33/32-3C90-E630
E71/33/32-3C90
3C92
8000 25%
1390
E71/33/32-3C92
3C94
10800 25%
1880
E71/33/32-3C94
3C95
13330 25%
E71/33/32-3C95
3F3
2315
100 5%(1)
17
17800
E71/33/32-3F3-E100
160 5%(1)
28
9620
E71/33/32-3F3-E160
250 5%(1)
43
5280
E71/33/32-3F3-E250
5%(1)
55
3900
E71/33/32-3F3-E315
400 8%(1)
69
2860
E71/33/32-3F3-E400
630 10%(1)
109
1620
E71/33/32-3F3-E630
1 740
315
10000 25%
Note
2013 Jul 31
302
E71/33/32-3F3
Ferroxcube
E71/33/32
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
3C90
320
12
16.5
3C92
370
11.5
60
GRADE
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C94
320
11.5
60
3C95
320
73.4
69.4
3F3
320
14
29
2013 Jul 31
303
Ferroxcube
E80/38/20
CORE SETS
Effective core parameters
80 1.6
handbook, halfpage
SYMBOL
PARAMETER
VALUE
59.1 min.
19.8
0.4
UNIT
(I/A)
0.470
mm1
Ve
effective volume
72300
mm3
Ie
effective length
184
mm
Ae
effective area
392
mm2
Amin
minimum area
392
mm2
180
28.2
0.3
38.1
0.3
19.8
0.4
CBW078
Dimensions in mm.
AL
(nH)
100 5%(1)
37
10800
E80/38/20-3C90-E100
160 5%(1)
60
5540
E80/38/20-3C90-E160
TYPE NUMBER
5%(1)
93
2900
E80/38/20-3C90-E250
315 5%(1)
118
2120
E80/38/20-3C90-E315
400 8%(1)
149
1540
E80/38/20-3C90-E400
630 10%(1)
235
860
5070 25%
1890
E80/38/20-3C90
3C92
3600 25%
1350
E80/38/20-3C92
3C94
5070 25%
1890
E80/38/20-3C94
3C95
6730 25%
2510
E80/38/20-3C95
100 5%(1)
37
10800
E80/38/20-3F3-E100
160 5%(1)
60
5540
E80/38/20-3F3-E160
250 5%(1)
93
2900
E80/38/20-3F3-E250
315 5%(1)
118
2120
E80/38/20-3F3-E315
400 8%(1)
149
1540
E80/38/20-3F3-E400
235
860
E80/38/20-3F3-E630
1 710
250
3F3
630
10%(1)
4590 25%
2013 Jul 31
304
E80/38/20-3C90-E630
E80/38/20-3F3
Ferroxcube
E80/38/20
Note
1. Measured in combination with an equal gapped core half.
Properties of core sets under power conditions
B (mT) at
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C90
320
7.2
10
3C92
370
7.5
45
GRADE
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C94
320
7.5
45
3C95
320
45.5
43.4
3F3
320
9.0
15.4
2013 Jul 31
305
Ferroxcube
E100/60/28
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
mm1
(I/A)
0.371
Ve
effective volume
202000 mm3
Ie
effective length
274
mm
Ae
effective area
738
mm2
Amin
minimum area
692
mm2
493
100.3 2.0
73.15 1.15
27.5
0.5
46.85
0.38 59.4
0.47
27.5
0.5
MFP130
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
7100 25 %
2100
E100/60/28-3C90
3C92
4800 25 %
1420
E100/60/28-3C92
3C94
7100 25 %
2100
E100/60/28-3C94
3C95
9010 25 %
2665
E100/60/28-3C95
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
3C90
320
34
34
3C92
370
27
3C94
320
27
3C95
320
145
137
2013 Jul 31
306
Ferroxcube
Soft Ferrites
2013 Jul 31
307
Ferroxcube
Soft Ferrites
EI cores
MFP100
2013 Jul 31
308
Ferroxcube
Soft Ferrites
EI cores
Ve
(mm3)
701
I16/2.4/5
E20/14/5
913
Ae
(mm2)
MASS
(g)
19.4
2.7
0.9
22.8
3.8
I20/2.3/5
1.1
E22/15/6
1450
33.1
5.9
2.3
2070
40.3
8.0
2.5
E28/17/11
4120
83.7
17
I28/3.5/11
5.1
E30/21/11
6720
I30/5.5/11
E33/23/13
7910
I22/4/6
E25/17/6
I25/3/6
I33/5/13
E35/24/10
I35/5/10
E40/27/12
I40/7.5/12
113
118
89.3
24
7.4
gap type:
A unsymmetrical gap to AL value
G mechanical gap
core material
core size
core type
MFP101
31
6270
143
AL value (nH)
or gap size (m)
25
special version
8.6
11100
dbook, 4 columns
10
42
17
Note :
All effective dimensions for E/I combination
I 16/2.4/5 3C90
core material
core size
core type
MFP102
2013 Jul 31
309
Ferroxcube
EI cores
E16/12/5
CORES
Effective core parameters of an E / I combination
16 0.3
handbook, halfpage
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
1.85
mm1
Ve
effective volume
701
mm3
Ie
effective length
35.8
mm
Ae
effective area
19.4
mm2
Amin
minimum area
19.4
mm2
mass of E core
2.7
mass of I core
0.9
12 0.3
4 0.2
handbook, halfpage
10.25
0.25
4.85 0.2
TYPE NUMBER
3C90
12.25
0.2
CBW582
I16/2.4/5-3C90
Dimensions in mm.
handbook, halfpage
4.85
0.2
16 0.3
2.4
0.2
MFP083
Dimensions in mm.
Fig.2 I16/2.4/5.
GRADE
1000 25 %
3C90
AIR GAP
(m)
e
1470
TYPE NUMBER
E16/12/5-3C90
E16/12/5+I16/2.4/5-3C90
2013 Jul 31
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
=100 mT;
B
T = 100 C
320
0.08
0.08
310
Ferroxcube
EI cores
E20/14/5
CORES
Effective core parameters of an E / I combination
SYMBOL
PARAMETER
VALUE
20 0.3
handbook, halfpage
14.3 min.
UNIT
(I/A)
1.76
mm1
Ve
effective volume
913
mm3
Ie
effective length
40.1
mm
Ae
effective area
22.8
mm2
Amin
minimum area
22.0
mm2
mass of E core
3.8
mass of I core
1.1
4.55
0.15
handbook, halfpage
11.5
0.15 13.55
0.15
5 0.2
TYPE NUMBER
3C90
MFP084
I20/2.3/5-3C90
Dimensions in mm.
handbook, halfpage
20 0.3
5 0.2
2.3
0.2
MFP085
Dimensions in mm.
Fig.2 I20/2.3/5.
GRADE
1290 25 %
3C90
AIR GAP
(m)
e
1810
TYPE NUMBER
E20/14/5-3C90
E20/14/5+I20/2.3/5-3C90
2013 Jul 31
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
=100 mT;
B
T = 100 C
320
0.11
0.11
311
Ferroxcube
EI cores
E22/15/6
CORES
Effective core parameters of an E / I combination
SYMBOL
PARAMETER
VALUE
22 0.5
handbook, halfpage
15.95 min.
UNIT
(I/A)
1.33
mm1
Ve
effective volume
1450
mm3
Ie
effective length
44.0
mm
Ae
effective area
33.1
mm2
Amin
minimum area
32.0
mm2
mass of E core
5.9
mass of I core
2.3
5.75
0.25
handbook, halfpage
11
0.25
5.75 0.25
TYPE NUMBER
3C90
15
0.25
MFP086
I22/4/6-3C90
Dimensions in mm.
handbook, halfpage
5.75
0.25
22 0.5
4 0.2
MFP087
Dimensions in mm.
Fig.2 I22/4/6.
GRADE
1750 25 %
3C90
AIR GAP
(m)
e
1850
TYPE NUMBER
E22/15/6-3C90
E22/15/6+I22/4/6-3C90
2013 Jul 31
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
=100 mT;
B
f = 400 kHz;
=50 mT;
B
330
0.17
0.17
312
T = 100 C
T = 100 C
Ferroxcube
EI cores
E25/17/6
CORES
Effective core parameters of an E / I combination
SYMBOL
PARAMETER
VALUE
25.4 0.5
handbook, halfpage
18.64 min.
UNIT
(I/A)
1.27
mm1
Ve
effective volume
2070
mm3
Ie
effective length
51.3
mm
Ae
effective area
40.3
mm2
Amin
minimum area
39.0
mm2
mass of E core
8.0
mass of I core
2.5
6.35
0.15
handbook, halfpage
13.83
0.3
6.35 0.25
TYPE NUMBER
3C90
17
0.25
MFP088
I25/3/6-3C90
Dimensions in mm.
handbook, halfpage
6.35
0.25
25.4 0.5
3.18
0.2
MFP089
Dimensions in mm.
Fig.2 I25/3/6.
GRADE
1750 25 %
3C90
AIR GAP
(m)
e
1770
TYPE NUMBER
E25/17/6-3C90
E25/17/6+I25/3/6-3C90
2013 Jul 31
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
=100 mT;
B
T = 100 C
330
0.24
0.24
313
Ferroxcube
EI cores
E28/17/11
CORES
Effective core parameters of an E / I combination
SYMBOL
PARAMETER
VALUE
28 0.55
handbook, halfpage
18.6 min.
UNIT
(I/A)
0.588
mm1
Ve
effective volume
4120
mm3
Ie
effective length
49.2
mm
Ae
effective area
83.7
mm2
Amin
minimum area
83.7
mm2
mass of E core
17
mass of I core
5.1
7.25
0.25
handbook, halfpage
12.8
0.2
10.75 0.2
TYPE NUMBER
3C90
17.3
0.25
MFP090
I28/3.5/11-3C90
Dimensions in mm.
handbook, halfpage
10.75
0.2
28 0.55
3.5
0.2
MFP091
Dimensions in mm.
Fig.2 I28/3.5/11.
GRADE
3625 25 %
3C90
AIR GAP
(m)
e
1700
TYPE NUMBER
E28/17/11-3C90
GRADE
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
=100 mT;
B
f = 400 kHz;
=50 mT;
B
E28/17/11+I28/3.5/11-3C90
330
0.5
0.5
2013 Jul 31
314
T = 100 C
T = 100 C
Ferroxcube
EI cores
E30/21/11
CORES
Effective core parameters of an E / I combination
SYMBOL
PARAMETER
VALUE
30.25 0.6
handbook, halfpage
19.85 min.
UNIT
(I/A)
0.524
mm1
Ve
effective volume
6720
mm3
Ie
effective length
59.2
mm
Ae
effective area
113
mm2
Amin
minimum area
104
mm2
mass of E core
25
mass of I core
8.6
10.65
0.25
handbook, halfpage
16.3
0.3
10.65 0.35
TYPE NUMBER
3C90
21.3
0.25
MFP092
I30/5.5/11-3C90
Dimensions in mm.
handbook, halfpage
10.65
0.35
30.25 0.6
5.5
0.2
MFP093
Dimensions in mm.
Fig.2 I30/5.5/11.
GRADE
4300 25 %
3C90
AIR GAP
(m)
e
1790
TYPE NUMBER
E30/21/11-3C90
GRADE
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
=100 mT;
B
T = 100 C
E30/21/11+I30/5.5/11-3C90
330
0.8
0.8
2013 Jul 31
315
Ferroxcube
EI cores
E33/23/13
CORES
SYMBOL
PARAMETER
VALUE
33 0.65
handbook, halfpage
23.6 min.
UNIT
(I/A)
0.567
mm1
Ve
effective volume
7910
mm3
Ie
effective length
66.9
mm
Ae
effective area
118
mm2
Amin
minimum area
114
mm2
mass of E core
31
mass of I core
10
9.7
0.3
handbook, halfpage
19.25
0.25 23.75
0.25
12.7 0.3
TYPE NUMBER
3C90
MFP094
I33/5/13-3C90
Dimensions in mm.
handbook, halfpage
12.7
0.3
33 0.65
5 0.2
MFP095
Dimensions in mm.
Fig.2 I33/5/13.
GRADE
4300 25 %
3C90
AIR GAP
(m)
e
1940
TYPE NUMBER
E33/23/13-3C90
E33/23/13+I33/5/13-3C90
2013 Jul 31
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
=100 mT;
B
T = 100 C
330
0.95
0.95
316
Ferroxcube
EI cores
E35/24/10
CORES
SYMBOL
PARAMETER
VALUE
34.9 0.7
handbook, halfpage
24.93 min.
UNIT
(I/A)
0.786
mm1
Ve
effective volume
6270
mm3
Ie
effective length
70.2
mm
Ae
effective area
89.3
mm2
Amin
minimum area
88.0
mm2
mass of E core
24
mass of I core
7.4
9.4
0.25
handbook, halfpage
19.05
0.4
9.5 0.35
TYPE NUMBER
3C90
23.8
0.25
MFP096
I35/5/10-3C90
Dimensions in mm.
handbook, halfpage
9.5
0.35
34.9 0.7
4.75
0.2
MFP097
Dimensions in mm.
Fig.2 I35/5/10.
GRADE
2960 25 %
3C90
AIR GAP
(m)
e
1850
TYPE NUMBER
E35/24/10-3C90
E35/24/10+I35/5/10-3C90
2013 Jul 31
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
=100 mT;
B
T = 100 C
330
0.75
0.75
317
Ferroxcube
EI cores
E40/27/12
CORES
Effective core parameters of an E / I combination
SYMBOL
PARAMETER
VALUE
40.2 0.7
handbook, halfpage
29 0.5
UNIT
(I/A)
0.542
mm1
Ve
effective volume
11100
mm3
Ie
effective length
77.5
mm
Ae
effective area
143
mm2
Amin
minimum area
133
mm2
mass of E core
42
mass of I core
17
11.85
0.35
handbook, halfpage
20.25
0.25 27.25
0.25
11.85 0.35
TYPE NUMBER
3C90
MFP098
I40/7.5/12-3C90
Dimensions in mm.
handbook, halfpage
11.85
0.35
40.2 0.7
7.5
0.3
MFP099
Dimensions in mm.
Fig.2 I40/7.5/12.
GRADE
4110 25 %
3C90
AIR GAP
(m)
e
1770
TYPE NUMBER
E40/27/12-3C90
GRADE
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
=100 mT;
B
T = 100 C
E40/27/12+I40/7.5/12-3C90
330
1.3
1.3
2013 Jul 31
318
Ferroxcube
Soft Ferrites
2013 Jul 31
319
Ferroxcube
Soft Ferrites
CBW266
2013 Jul 31
320
Ferroxcube
Soft Ferrites
PRODUCT OVERVIEW AND
TYPE NUMBER STRUCTURE
Product overview Planar E cores
Ve
(mm 3)
Ae
(mm 2)
MASS
(g)
E14/3.5/5
300
14.5
0.6
PLT14/5/1.5
240
14.5
0.5
E14/3.5/5/R
0.6
PLT14/5/1.5/S
230
14.2
0.5
E18/4/10
960
39.5
2.4
PLT18/10/2
800
39.5
1.7
E18/4/10/R
2.4
PLT18/10/2/S
830
40.8
1.7
E22/6/16
2550
78.5
6.5
PLT22/16/2.5
2040
78.5
4.0
E22/6/16/R
6.5
CORE TYPE
PLT22/16/2.5/S 2100
80.4
4.0
E32/6/20
129
13
5380
PLT32/20/3
4560
129
10
E32/6/20/R
13
PLT32/20/3/R
4560
130
10
E38/8/25
10 200
194
25
PLT38/25/3.8
8460
194
18
E43/10/28
13 900
225
35
PLT43/28/4
11 500
225
24
E58/11/38
24 600
305
62
PLT58/38/4
20 800
305
44
E64/10/50
40 700
511
100
PLT64/50/5
35 500
511
78
CBW079
PLT14/5/1.5/S 3F3
material
S clamp slot
R clamp recess
core size (always 3 dim.)
core type
CBW294
CLM E18/PLT18
corresponding plate
(only main dim.)
corresponding E core
(only main dim.)
accessory type
CBW295
2013 Jul 31
321
Ferroxcube
E14/3.5/5
CORES
Effective core parameters of a set of E cores
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
1.43
mm1
Ve
effective volume
300
mm3
Ie
effective length
20.7
mm
Ae
effective area
14.3
mm2
Amin
minimum area
14.3
mm2
0.6
14 0.3
handbook, halfpage
11 0.25
3
0.05
2 0.1
3.5 0.1
5 0.1
MBE644
R 0.8 (12x)
Dimensions in mm.
PARAMETER
VALUE
UNIT
(I/A)
1.16
mm1
Ve
effective volume
240
mm3
Ie
effective length
16.7
mm
Ae
effective area
14.5
mm2
Amin
minimum area
14.5
mm2
mass of plate
0.5
handbook, halfpage
14 0.3
1.5 0.05
TYPE NUMBER
3C90
PLT14/5/1.5-3C90
3C92
PLT14/5/1.5-3C92
3C93
PLT14/5/1.5-3C93
3C94
PLT14/5/1.5-3C94
3C95
PLT14/5/1.5-3C95
3C96
PLT14/5/1.5-3C96
3F3
PLT14/5/1.5-3F3
3F35
PLT14/5/1.5-3F35
3F4
PLT14/5/1.5-3F4
3F45
PLT14/5/1.5-3F45
3E6
PLT14/5/1.5-3E6
2013 Jul 31
5 0.1
R 0.8
MBE652
Dimensions in mm.
Fig.2 PLT14/5/1.5.
322
Ferroxcube
E14/3.5/5
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
63 3%
72
530
E14/3.5/5-3C90-A63-E
100 5%
114
270
E14/3.5/5-3C90-A100-E
E14/3.5/5-3C90-A160-E
182
130
1280 25%
160 8%
1450
E14/3.5/5-3C90
3C92
960 25%
1090
E14/3.5/5-3C92
3C93
1100 25%
1250
E14/3.5/5-3C93
63 3%
72
530
E14/3.5/5-3C94-A63-E
100 5%
114
270
E14/3.5/5-3C94-A100-E
E14/3.5/5-3C94-A160-E
3C94
182
130
1280 25%
160 8%
1450
E14/3.5/5-3C94
3C95
1500 25%
1730
E14/3.5/5-3C95
3C96
1200 25%
E14/3.5/5-3C96
3F3
1360
63 3%
72
530
E14/3.5/5-3F3-A63-E
100 5%
114
270
E14/3.5/5-3F3-A100-E
E14/3.5/5-3F3-A160-E
182
130
1100 25%
160 8%
1250
E14/3.5/5-3F3
3F35
900 25%
1020
E14/3.5/5-3F35
3F4
63 3%
72
530
E14/3.5/5-3F4-A63-E
100 5%
114
270
E14/3.5/5-3F4-A100-E
E14/3.5/5-3F4-A160-E
3F45
3E6
2013 Jul 31
160 8%
182
130
650 25%
740
E14/3.5/5-3F4
650 25%
740
E14/3.5/5-3F45
6360
E14/3.5/5-3E6
5 600 +40/30%
323
Ferroxcube
E14/3.5/5
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
63 3%
58
600
E14/3.5/5-3C90-A63-P
100 5%
92
300
E14/3.5/5-3C90-A100-P
E14/3.5/5-3C90-A160-P
160 8%
1500 25%
148
150
1400
E14/3.5/5-3C90
3C92
11 30 25%
1040
E14/3.5/5-3C92
3C93
1300 25%
1200
E14/3.5/5-3C93
63 3%
58
600
E14/3.5/5-3C94-A63-P
100 5%
92
300
E14/3.5/5-3C94-A100-P
E14/3.5/5-3C94-A160-P
3C94
160 8%
148
150
1500 25%
1400
E14/3.5/5-3C94
3C95
1740 25%
1600
E14/3.5/5-3C95
3C96
1350 25%
E14/3.5/5-3C96
3F3
1260
63 3%
58
600
E14/3.5/5-3F3-A63-P
100 5%
92
300
E14/3.5/5-3F3-A100-P
E14/3.5/5-3F3-A160-P
160 8%
3F35
3F4
148
150
1300 25%
1200
E14/3.5/5-3F3
1050 25%
980
E14/3.5/5-3F35
63 3%
58
600
E14/3.5/5-3F4-A63-P
100 5%
92
300
E14/3.5/5-3F4-A100-P
E14/3.5/5-3F4-A160-P
160 8%
148
150
780 25%
720
E14/3.5/5-3F4
3F45
780 25%
720
E14/3.5/5-3F45
3E6
6400 +40/30%
5900
E14/3.5/5-3E6
2013 Jul 31
324
Ferroxcube
E14/3.5/5
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
E+E14-3C90
320
0.030
E+PLT14-3C90
320
0.026
E+E14-3C92
370
0.024
0.16
E+PLT14-3C92
370
0.021
0.15
E+E14-3C93
320
0.024(1)
0.16(1)
E+PLT14-3C93
320
0.021(1)
0.15(1)
E+E14-3C94
320
0.024
0.16
E+PLT14-3C94
320
0.021
0.15
E+E14-3C95
320
0.17
0.16
E+PLT14-3C95
320
0.13
0.12
E+E14-3C96
340
0.019
0.13
0.05
0.11
E+PLT14-3C96
340
0.016
0.12
0.045
0.09
E+E14-3F3
300
0.033
0.06
E+PLT14-3F3
300
0.027
0.047
E+E14-3F35
300
0.03
0.05
E+PLT14-3F35
300
0.024
0.035
1.
Measured at 140 C.
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
E+E14-3F35
300
0.35
E+PLT14-3F35
300
0.27
E+E14-3F4
250
0.09
0.15
GRADE
E+PLT14-3F4
250
0.07
0.12
E+E14-3F45
250
0.07
0.26
0.12
E+PLT14-3F45
250
0.055
0.2
0.095
2013 Jul 31
325
Ferroxcube
E14/3.5/5
MOUNTING INFORMATION
R 0.75 max.
3.2
min.
handbook, 4 columns
5.3 min.
10.6 max.
CBW549
14.5 min.
2013 Jul 31
326
Ferroxcube
E14/3.5/5
K0
handbook, full pagewidth
P0
D0
P2
E
F
cover tape
B0
A0
D1
P1
direction of unreeling
Table 1
SIZE
DIMENSIONS
(mm)
A0
5.4 0.2
B0
14.6 0.2
K0
4.0 0.2
0.3 0.05
24.0 0.3
1.75 0.1
11.5 0.1
D0
1.5 +0.1
D1
1.5
P0
4.0 0.1
P1
8.0 0.1
P2
2.0 0.1
2013 Jul 31
327
MEA613 - 1
Ferroxcube
E14/3.5/5
cover film
direction of
unreeling
blister tape
MEA639
direction of unreeling
leader 552 mm
minimum number of
empty compartments
trailer
Leader: length of leader tape is 552 mm minimum covered with cover tape.
Trailer: 160 mm minimum (secured with tape).
Storage temperature range for tape: 25 to +45 C.
2013 Jul 31
328
Ferroxcube
E14/3.5/5
W2
20.5
12.75
0.15
N
0
MSA284
W1
Dimensions in mm.
For dimensions see Table 2.
Fig.7 Reel.
Table 2
SIZE
24
2013 Jul 31
W1
W2
330
100 5
24.4
28.4
329
Ferroxcube
E14/3.5/5/R
CORES
Effective core parameters of an E/PLT combination
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
1.15
mm1
Ve
effective volume
230
mm3
Ie
effective length
16.4
mm
Ae
effective area
14.2
mm2
minimum area
10.9
mm2
0.6
mass of plate
0.5
Amin
14 0.3
11 0.25
3
0.05
handbook, halfpage
2 0.1
TYPE NUMBER
3C90
PLT14/5/1.5/S-3C90
3C92
PLT14/5/1.5/S-3C92
3C93
PLT14/5/1.5/S-3C93
3C94
PLT14/5/1.5/S-3C94
3C95
PLT14/5/1.5/S-3C95
3C96
PLT14/5/1.5/S-3C96
3F3
PLT14/5/1.5/S-3F3
3F35
PLT14/5/1.5/S-3F35
3F4
PLT14/5/1.5/S-3F4
3F45
PLT14/5/1.5/S-3F45
3E6
PLT14/5/1.5/S-3E6
CBW173
Dimensions in mm.
14 0.3
1.5 0.1
ook, halfpage
1.8 0.05
5 0.1
2.5 +0.2
0
CBW174
Dimensions in mm.
Fig.2 PLT14/5/1.5/S.
2013 Jul 31
330
Ferroxcube
E14/3.5/5/R
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
63 3%
58
600
E14/3.5/5/R-3C90-A63-P
100 5%
92
300
E14/3.5/5/R-3C90-A100-P
E14/3.5/5/R-3C90-A160-P
148
150
1500 25%
160 8%
1380
E14/3.5/5/R-3C90
3C92
1130 25%
1040
E14/3.5/5/R-3C92
3C93
1300 25%
1200
E14/3.5/5/R-3C93
63 3%
58
600
E14/3.5/5/R-3C94-A63-P
100 5%
92
300
E14/3.5/5/R-3C94-A100-P
E14/3.5/5/R-3C94-A160-P
3C94
160 8%
1500 25%
148
150
1380
E14/3.5/5/R-3C94
3C95
1740 25%
1600
E14/3.5/5/R-3C95
3C96
1350 25%
1240
E14/3.5/5/R-3C96
63 3%
58
600
E14/3.5/5/R-3F3-A63-P
100 5%
92
300
E14/3.5/5/R-3F3-A100-P
E14/3.5/5/R-3F3-A160-P
3F3
160 8%
3F35
3F4
148
150
1300 25%
1200
E14/3.5/5/R-3F3
1050 25%
970
E14/3.5/5/R-3F35
58
600
63 3%
E14/3.5/5/R-3F4-A63-P
100 5%
92
300
E14/3.5/5/R-3F4-A100-P
160 8%
148
150
E14/3.5/5/R-3F4-A160-P
780 25%
710
E14/3.5/5/R-3F4
3F45
780 25%
710
E14/3.5/5/R-3F45
3E6
6400 +40/30%
5900
E14/3.5/5/R-3E6
2013 Jul 31
331
Ferroxcube
E14/3.5/5/R
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
E14/R+PLT14/S-3C90
320
0.026
E14/R+PLT14/S-3C92
370
0.021
0.15
E14/R+PLT14/S-3C93
320
0.021(1)
0.15(1)
E14/R+PLT14/S-3C94
320
0.021
0.15
E14/R+PLT14/S-3C95
320
0.13
0.12
E14/R+PLT14/S-3C96
340
0.016
0.12
0.045
0.09
GRADE
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
E14/R+PLT14/S-3F3
300
0.027
0.047
E14/R+PLT14/S-3F35
300
0.024
0.035
E14/R+PLT14/S-3F4
250
E14/R+PLT14/S-3F45
250
1.
Measured at 140 C.
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
E14/R+PLT14/S-3C90
320
E14/R+PLT14/S-3C92
370
E14/R+PLT14/S-3C93
320
E14/R+PLT14/S-3C94
320
E14/R+PLT14/S-3C95
320
E14/R+PLT14/S-3C96
340
E14/R+PLT14/S-3F3
300
E14/R+PLT14/S-3F35
300
0.027
E14/R+PLT14/S-3F4
250
0.07
0.11
E14/R+PLT14/S-3F45
250
0.055
0.2
0.09
GRADE
2013 Jul 31
332
Ferroxcube
E14/3.5/5/R
MOUNTING PARTS
General data and ordering information
ITEM
Clamp
MATERIAL
FIGURE
TYPE NUMBER
CLM-E14/PLT14
R 0.75max.
3.2 min.
13.6
5.5
handbook, halfpage
2.2
olumns
0.3
5.4 0.1
14 0.2
5.3 2.5
min. min.
10.6 max.
CBW175
14.5 min.
CBW550
17.5 min.
Dimensions in mm.
Dimensions in mm.
Fig.4
2013 Jul 31
333
Ferroxcube
E18/4/10
CORES
Effective core parameters of a set of E cores
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.616
mm1
Ve
effective volume
960
mm3
14 0.3
Ie
effective length
24.3
mm
4 0.1
Ae
effective area
39.3
mm2
Amin
minimum area
39.3
mm2
2.4
18 0.35
handbook, halfpage
2 0.1
10 0.2
CBW297
R0.8 (12)
Dimensions in mm.
PARAMETER
VALUE
UNIT
(I/A)
0.514
mm1
Ve
effective volume
800
mm3
Ie
effective length
20.3
mm
Ae
effective area
39.5
mm2
Amin
minimum area
39.5
mm2
mass of plate
1.7
handbook, halfpage
18 0.35
2 0.05
TYPE NUMBER
3C90
PLT18/10/2-3C90
3C92
PLT18/10/2-3C92
3C93
PLT18/10/2-3C93
3C94
PLT18/10/2-3C94
3C95
PLT18/10/2-3C95
3C96
PLT18/10/2-3C96
3F3
PLT18/10/2-3F3
3F35
PLT18/10/2-3F35
3F4
PLT18/10/2-3F4
3F45
PLT18/10/2-3F45
3E6
PLT18/10/2-3E6
2013 Jul 31
10 0.2
R0.8
CBW298
Dimensions in mm.
Fig.2 PLT18/10/2.
334
4 0.1
Ferroxcube
E18/4/10
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
100 3%
49
800
E18/4/10-3C90-A100-E
160 3%
78
420
E18/4/10-3C90-A160-E
250 5%
123
220
E18/4/10-3C90-A250-E
315 8%
154
170
E18/4/10-3C90-A315-E
3200 25%
1560
E18/4/10-3C90
3C92
2330 25%
11 40
E18/4/10-3C92
3C93
2700 25%
1320
E18/4/10-3C93
3C94
100 3%
49
800
E18/4/10-3C94-A100-E
160 3%
78
420
E18/4/10-3C94-A160-E
250 5%
123
220
E18/4/10-3C94-A250-E
315 8%
154
170
E18/4/10-3C94-A315-E
3200 25%
1560
E18/4/10-3C94
3C95
3800 25%
1870
E18/4/10-3C95
3C96
2900 25%
1410
E18/4/10-3C96
100 3%
49
800
E18/4/10-3F3-A100-E
160 3%
78
420
E18/4/10-3F3-A160-E
3F3
250 5%
123
220
E18/4/10-3F3-A250-E
315 8%
154
170
E18/4/10-3F3-A315-E
2700 25%
1320
E18/4/10-3F3
3F35
2200 25%
1070
E18/4/10-3F35
3F4
100 3%
49
800
E18/4/10-3F4-A100-E
160 3%
78
420
E18/4/10-3F4-A160-E
250 5%
123
220
E18/4/10-3F4-A250-E
E18/4/10-3F4-A315-E
315 8%
154
170
1550 25%
760
E18/4/10-3F4
3F45
1550 25%
760
E18/4/10-3F45
3E6
13500 +40/-30%
6600
E18/4/10-3E6
2013 Jul 31
335
Ferroxcube
E18/4/10
AL()
(nH)
AIR GAP
(m)
TYPE NUMBER
100 3%
41
870
E18/4/10-3C90-A100-P
160 3%
65
470
E18/4/10-3C90-A160-P
250 5%
102
240
E18/4/10-3C90-A250-P
315 8%
129
170
E18/4/10-3C90-A315-P
3680 25%
1500
E18/4/10-3C90
3C92
2690 25%
1100
E18/4/10-3C92
3C93
3100 25%
1270
3C94
100 3%
41
870
E18/4/10-3C93
E18/4/10-3C94-A100-P
160 3%
65
470
E18/4/10-3C94-A160-P
250 5%
102
240
E18/4/10-3C94-A250-P
E18/4/10-C94-A315-P
129
170
3680 25%
315 8%
1500
E18/4/10-3C94
3C95
4340 25%
1780
E18/4/10-3C95
3C96
3250 25%
1320
41
870
3F3
100 3%
E18/4/10-3C96
E18/4/10-3F3-A100-P
160 3%
65
470
E18/4/10-3F3-A160-P
250 5%
102
240
E18/4/10-3F3-A250-P
E18/4/10-3F3-A315-P
129
170
3100 25%
315 8%
1270
3F35
2500 25%
1020
3F4
100 3%
41
870
E18/4/10-3F3
E18/4/10-3F35
E18/4/10-3F4-A100-P
160 3%
65
470
E18/4/10-3F4-A160-P
250 5%
102
240
E18/4/10-3F4-A250-P
E18/4/10-3F4-A315-P
315 8%
129
170
1800 25%
740
E18/4/10-3F4
3F45
1800 25%
740
E18/4/10-3F45
3E6
15500 +40/-30%
6400
E18/4/10-3E6
2013 Jul 31
336
Ferroxcube
E18/4/10
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
E+E18-3C90
320
0.105
E+PLT18-3C90
320
0.095
E+E18-3C92
370
0.085
0.6
E+PLT18-3C92
370
0.075
0.5
E+E18-3C93
320
0.085 (1)
0.6(1)
E+PLT18-3C93
320
0.075 (1)
0.5(1)
E+E18-3C94
320
0.085
0.6
E+PLT18-3C94
320
0.075
0.5
E+E18-3C95
320
0.53
0.5
E+PLT18-3C95
320
0.44
0.42
E+E18-3C96
320
0.065
0.45
0.18
0.35
E+PLT18-3C96
320
0.06
0.4
0.15
0.3
E+E18-3F3
300
0.11
0.19
E+PLT18-3F3
300
0.09
0.16
E+E18-3F35
300
0.09
0.13
E+PLT18-3F35
300
0.08
0.12
GRADE
1.
Measured at 140 C.
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
E+E18-3F35
300
1.0
E+PLT18-3F35
300
0.9
E+E18-3F4
250
0.3
0.45
GRADE
E+PLT18-3F4
250
0.24
0.39
E+E18-3F45
250
0.22
0.82
0.38
E+PLT18-3F45
250
0.18
0.67
0.32
2013 Jul 31
337
Ferroxcube
E18/4/10
MOUNTING INFORMATION
4.25
min.
R 0.8 max.
handbook, 4 columns
10.4
min.
13.5 max.
CBW551
18.5 min.
2013 Jul 31
338
Ferroxcube
E18/4/10
K0
handbook, full pagewidth
P0
D0
P2
E
F
cover tape
B0
P1
Table 1
SIZE
DIMENSIONS
(mm)
A0
10.5 0.2
B0
18.7 0.2
K0
4.5 0.2
0.3 0.05
32.0 0.3
1.75 0.1
14.2 0.1
D0
1.5 +0.1
D1
2.0
P0
4.0 0.1
P1
16.0 0.1
P2
2.0 0.1
28.4 0.1
2013 Jul 31
339
CBW404
D1
A0
direction of unreeling
Ferroxcube
E18/4/10
cover film
handbook, full pagewidth
direction of
unreeling
blister tape
CBW405
direction of unreeling
leader 552 mm
handbook, full pagewidth
minimum number of
empty compartments
trailer
Leader: length of leader tape is 552 mm minimum covered with cover tape.
Trailer: 160 mm minimum (secured with tape).
Storage temperature range for tape: 25 to +45 C.
2013 Jul 31
340
Ferroxcube
E18/4/10
W2
20.5
12.75
0.15
N
0
MSA284
W1
Dimensions in mm.
For dimensions see Table 2.
Fig.7 Reel.
Table 2
SIZE
32
2013 Jul 31
W1
W2
330
100 5
32.4
36.4
341
Ferroxcube
E18/4/10/R
CORES
Effective core parameters of an E/PLT combination
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.498
mm1
Ve
effective volume
830
mm3
Ie
effective length
20.3
mm
Ae
effective area
39.5
mm2
Amin
minimum area
35.9
mm2
2.4
mass of plate
1.7
18 0.35
14 0.3
handbook, halfpage
4 0.1
2 0.1
10 0.2
2.5 +0.2
0
TYPE NUMBER
3C90
PLT18/10/2/S-3C90
3C92
PLT18/10/2/S-3C92
3C93
PLT18/10/2/S-3C93
3C94
PLT18/10/2/S-3C94
3C95
PLT18/10/2/S-3C95
3C96
PLT18/10/2/S-3C96
3F3
PLT18/10/2/S-3F3
3F35
PLT18/10/2/S-3F35
3F4
PLT18/10/2/S-3F4
3F45
PLT18/10/2/S-3F45
3E6
PLT18/10/2/S-3E6
CBW080
Dimensions in mm.
2 0.1
18 0.35
dbook, halfpage
2.4 0.05
10 0.2
2.5 +0.2
0
CBW081
Dimensions in mm.
2013 Jul 31
342
Ferroxcube
E18/4/10/R
AL
(nH)
AIR GAP
(m)
100 3%
41
870
160 3%
65
470
E18/4/10/R-3C90-A160-P
250 5%
102
240
E18/4/10/R-3C90-A250-P
E18/4/10/R-3C90-A315-P
TYPE NUMBER
E18/4/10/R-3C90-A100-P
315 8%
129
170
3680 25%
1500
E18/4/10/R-3C90
3C92
2690 25%
1070
E18/4/10/R-3C92
3C93
3100 25%
1230
E18/4/10/R-3C93
3C94
100 3%
41
870
160 3%
65
470
E18/4/10/R-3C94-A160-P
250 5%
102
240
E18/4/10/R-3C94-A250-P
E18/4/10/R-3C94-A315-P
E18/4/10/R-3C94-A100-P
315 8%
129
170
3680 25%
1500
E18/4/10/R-3C94
3C95
4340 25%
1780
E18/4/10/R-3C95
3C96
3250 25%
1320
E18/4/10/R-3C96
100 3%
41
870
160 3%
65
470
E18/4/10/R-3F3-A160-P
250 5%
102
240
E18/4/10/R-3F3-A250-P
E18/4/10/R-3F3-A315-P
3F3
E18/4/10/R-3F3-A100-P
315 8%
129
170
3100 25%
1270
E18/4/10/R-3F3
3F35
2500 25%
1020
E18/4/10/R-3F35
3F4
100 3%
41
870
160 3%
65
470
E18/4/10/R-3F4-A160-P
250 5%
102
240
E18/4/10/R-3F4-A250-P
E18/4/10/R-3F4-A315-P
E18/4/10/R-3F4-A100-P
315 8%
129
170
1800 25%
740
3F45
1800 25%
740
E18/4/10/R-3F45
3E6
15 500 +40/30%
6400
E18/4/10/R-3E6
2013 Jul 31
343
E18/4/10/R-3F4
Ferroxcube
E18/4/10/R
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
E18/R+PLT18/S-3C90
320
0.095
E18/R+PLT18/S-3C92
370
0.075
GRADE
0.075(1)
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
0.5
0.5(1)
E18/R+PLT18/S-3C93
320
E18/R+PLT18/S-3C94
320
0.075
0.5
E18/R+PLT18/S-3C95
320
0.46
0.43
E18/R+PLT18/S-3C96
320
0.06
0.4
0.15
0.3
E18/R+PLT18/S-3F3
300
0.09
0.16
E18/R+PLT18/S-3F35
300
0.08
0.12
E18/R+PLT18/S-3F4
250
E18/R+PLT18/S-3F45
250
1.
Measured at 140 C.
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
E18/R+PLT18/S-3C90
320
E18/R+PLT18/S-3C92
370
E18/R+PLT18/S-3C93
320
E18/R+PLT18/S-3C94
320
E18/R+PLT18/S-3C95
320
E18/R+PLT18/S-3C96
320
E18/R+PLT18/S-3F3
300
E18/R+PLT18/S-3F35
300
0.9
E18/R+PLT18/S-3F4
250
0.24
0.39
E18/R+PLT18/S-3F45
250
0.18
0.67
0.32
GRADE
2013 Jul 31
344
Ferroxcube
E18/4/10/R
MOUNTING PARTS
General data and ordering information
ITEM
Clamp
MATERIAL
FIGURE
TYPE NUMBER
CLM-E18/PLT18
R 0.8 max.
17.6
7
handbook, halfpage
2.2
lumns
10.4
min.
0.4
6.6 0.1
18.2 0.3
4.25
min.
2.5 min.
CBW176
13.5 max.
18.5 min.
CBW552
Dimensions in mm.
Fig.4
21.5 min.
2013 Jul 31
345
Ferroxcube
E22/6/16
CORES
Effective core parameters of a set of E cores
SYMBOL
PARAMETER
VALUE
handbook, halfpage
UNIT
(I/A)
0.414
mm1
Ve
effective volume
2550
mm3
Ie
effective length
32.5
mm
Ae
effective area
78.3
mm2
Amin
minimum area
78.3
mm2
6.5
21.8 0.4
16.8 0.4
5
0.1
3.2 0.1
5.7 0.1
15.8 0.3
MBE646
R 0.8 (12x)
Dimensions in mm.
Fig.1 E22/6/16.
Effective core parameters of an E/PLT combination
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.332
mm1
Ve
effective volume
2040
mm3
Ie
effective length
26.1
mm
Ae
effective area
78.5
mm2
Amin
minimum area
78.5
mm2
mass of plate
handbook, halfpage
21.8 0.4
2.5 0.05
TYPE NUMBER
3C90
PLT22/16/2.5-3C90
3C92
PLT22/16/2.5-3C92
3C93
PLT22/16/2.5-3C93
3C94
PLT22/16/2.5-3C94
3C95
PLT22/16/2.5-3C95
3C96
PLT22/16/2.5-3C96
3F3
PLT22/16/2.5-3F3
3F35
PLT22/16/2.5-3F35
3F4
PLT22/16/2.5-3F4
3F45
PLT22/16/2.5-3F45
3E6
PLT22/16/2.5-3E6
2013 Jul 31
15.8 0.3
MBE654
R 0.8
Dimensions in mm.
Fig.2 PLT22/16/2.5.
346
Ferroxcube
E22/6/16
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
160 3%
53
900
E22/6/16-3C90-A160-E
250 3%
82
490
E22/6/16-3C90-A250-E
315 3%
104
360
E22/6/16-3C90-A315-E
400 5%
132
280
E22/6/16-3C90-A400-E
E22/6/16-3C90-A630-E
208
160
5150 25%
630 8%
1700
E22/6/16-3C90
3C92
3700 25%
1220
E22/6/16-3C92
3C93
4300 25%
1420
E22/6/16-3C93
3C94
160 3%
53
900
E22/6/16-3C94-A160-E
250 3%
82
490
E22/6/16-3C94-A250-E
315 3%
104
360
E22/6/16-3C94-A315-E
400 5%
132
280
E22/6/16-3C94-A400-E
E22/6/16-3C94-A630-E
208
160
5150 25%
630 8%
1700
E22/6/16-3C94
3C95
6220 25%
2050
E22/6/16-3C95
3C96
4600 25%
1520
E22/6/16-3C96
160 3%
53
900
E22/6/16-3F3-A160-E
250 3%
82
490
E22/6/16-3F3-A250-E
3F3
315 3%
104
360
E22/6/16-3F3-A315-E
400 5%
132
280
E22/6/16-3F3-A400-E
630 8%
208
160
E22/6/16-3F3-A630-E
4300 25%
1420
E22/6/16-3F3
3F35
3500 25%
1160
E22/6/16-3F35
3F4
160 3%
53
900
E22/6/16-3F4-A160-E
250 3%
82
490
E22/6/16-3F4-A250-E
315 3%
104
360
E22/6/16-3F4-A315-E
400 5%
132
280
E22/6/16-3F4-A400-E
E22/6/16-3F4-A630-E
630 8%
208
160
2400 25%
790
E22/6/16-3F4
3F45
2400 25%
790
E22/6/16-3F45
3E6
22 000 +40/30%
7250
E22/6/16-3E6
2013 Jul 31
347
Ferroxcube
E22/6/16
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
160 3%
42
950
E22/6/16-A160-P
250 3%
66
550
E22/6/16-3C90-A250-P
315 3%
83
400
E22/6/16-3C90-A315-P
400 5%
106
280
E22/6/16-3C90-A400-P
E22/6/16-3C90-A630-P
166
160
6150 25%
630 8%
1620
E22/6/16-3C90
3C92
4410 25%
1170
E22/6/16-3C92
3C93
5000 25%
1320
E22/6/16-3C93
3C94
160 3%
42
950
E22/6/16-3C94-A160-P
250 3%
66
550
E22/6/16-3C94-A250-P
315 3%
83
400
E22/6/16-3C94-A315-P
400 5%
106
280
E22/6/16-3C94-A400-P
E22/6/16-3C94-A630-P
166
160
6150 25%
630 8%
1620
E22/6/16-3C94
3C95
7360 25%
1950
E22/6/16-3C95
3C96
5450 25%
1440
E22/6/16-3C96
160 3%
42
950
E22/6/16-3F3-A160-P
250 3%
66
550
E22/6/16-3F3-A250-P
3F3
315 3%
83
400
E22/6/16-3F3-A315-P
400 5%
106
280
E22/6/16-3F3-A400-P
630 8%
166
160
E22/6/16-3F3-A630-P
5000 25%
1320
E22/6/16-3F3
3F35
4100 25%
1080
E22/6/16-3F35
3F4
160 3%
42
950
E22/6/16-3F4-A160-P
250 3%
66
550
E22/6/16-3F4-A250-P
315 3%
83
400
E22/6/16-3F4-A315-P
400 5%
106
280
E22/6/16-3F4-A400-P
E22/6/16-3F4-A630-P
630 8%
166
160
2900 25%
770
E22/6/16-3F4
3F45
2900 25%
770
E22/6/16-3F45
3E6
26 000 +40/30%
6900
E22/6/16-3E6
2013 Jul 31
348
Ferroxcube
E22/6/16
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
E+E22-3C90
320
0.28
E+PLT22-3C90
320
0.23
E+E22-3C92
370
0.22
1.5
E+PLT22-3C92
370
0.18
1.25
E+E22-3C93
320
0.22(1)
1.5(1)
E+PLT22-3C93
320
0.18(1)
1.25(1)
E+E22-3C94
320
0.22
1.5
E+PLT22-3C94
320
0.18
1.25
E+E22-3C95
320
1.5
1.43
E+PLT22-3C95
320
1.2
1.14
E+E22-3C96
320
0.17
1.1
0.45
1.0
E+PLT22-3C96
320
0.14
1.0
0.38
0.75
GRADE
E+E22-3F3
300
0.28
0.5
E+PLT22-3F3
300
0.23
0.40
E+E22-3F35
300
0.25
0.4
E+PLT22-3F35
300
0.2
0.3
1.
Measured at 140 C.
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
E+E22-3F35
300
3.0
E+PLT22-3F35
300
2.2
E+E22-3F4
250
0.8
1.2
GRADE
E+PLT22-3F4
250
0.6
1.0
E+E22-3F45
250
0.6
2.2
1.0
E+PLT22-3F45
250
0.45
1.7
0.8
2013 Jul 31
349
Ferroxcube
E22/6/16
MOUNTING INFORMATION
R0.8 max.
5.25
min.
handbook, 4 columns
16.3
min.
16.2 max.
CBW553
22.4 min.
2013 Jul 31
350
Ferroxcube
E22/6/16/R
CORES
Effective core parameters of an E/PLT combination
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.324
mm1
Ve
effective volume
2100
mm3
Ie
effective length
26.1
mm
Ae
effective area
78.5
mm2
mm2
Amin
minimum area
72.6
6.5
mass of plate
21.8 0.4
16.8 0.4
5
0.1
andbook, halfpage
3.2 0.1
2.8 +0.2
0 15.8 0.3
TYPE NUMBER
3C90
PLT22/16/2.5/S-3C90
3C92
PLT22/16/2.5/S-3C92
3C93
PLT22/16/2.5/S-3C93
3C94
PLT22/16/2.5/S-3C94
3C95
PLT22/16/2.5/S-3C95
3C96
PLT22/16/2.5/S-3C96
3F3
PLT22/16/2.5/S-3F3
3F35
PLT22/16/2.5/S-3F35
3F4
PLT22/16/2.5/S-3F4
3F45
PLT22/16/2.5/S-3F45
3E6
PLT22/16/2.5/S-3E6
CBW177
Dimensions in mm.
Fig.1 E22/6/16/R.
21.8 0.4
2.5 0.1
ndbook, halfpage
2.9 0.05
+0.2
2.9 0 15.8 0.3
CBW178
Dimensions in mm.
Fig.2 PLT22/16/2.5/S.
2013 Jul 31
351
Ferroxcube
E22/6/16/R
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
160 3%
42
950
E22/6/16/R-3C90-A160-P
250 3%
66
550
E22/6/16/R-3C90-A250-P
315 3%
83
400
E22/6/16/R-3C90-A315-P
400 5%
106
280
E22/6/16/R-3C90-A400-P
E22/6/16/R-3C90-A630-P
166
160
6150 25%
630 8%
1620
E22/6/16/R-3C90
3C92
4410 25%
1140
E22/6/16/R-3C92
3C93
5000 25%
1290
E22/6/16/R-3C93
3C94
160 3%
42
950
E22/6/16/R-3C94-A160-P
250 3%
66
550
E22/6/16/R-3C94-A250-P
315 3%
83
400
E22/6/16/R-3C94-A315-P
400 5%
106
280
E22/6/16/R-3C94-A400-P
E22/6/16/R-3C94-A630-P
166
160
6150 25%
630 8%
1620
E22/6/16/R-3C94
3C95
7360 25%
1950
E22/6/16/R-3C95
3C96
5450 25%
1440
E22/6/16/R-3C96
160 3%
42
950
E22/6/16/R-3F3-A160-P
250 3%
66
550
E22/6/16/R-3F3-A250-P
3F3
315 3%
83
400
E22/6/16/R-3F3-A315-P
400 5%
106
280
E22/6/16/R-3F3-A400-P
630 8%
166
160
E22/6/16/R-3F3-A630-P
5000 25%
1320
E22/6/16/R-3F3
3F35
4100 25%
1080
E22/6/16/R-3F35
3F4
160 3%
42
950
E22/6/16/R-3F4-A160-P
250 3%
66
550
E22/6/16/R-3F4-A250-P
315 3%
83
400
E22/6/16/R-3F4-A315-P
400 5%
106
280
E22/6/16/R-3F4-A400-P
E22/6/16/R-3F4-A630-P
630 8%
166
160
2900 25%
770
E22/6/16/R-3F4
3F45
2900 25%
770
E22/6/16/R-3F45
3E6
26 000 +40/30%
6900
E22/6/16/R-3E6
2013 Jul 31
352
Ferroxcube
E22/6/16/R
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
E22/R+PLT22/S-3C90
320
0.23
E22/R+PLT22/S-3C92
370
0.18
GRADE
0.18(1)
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
1.25
1.25(1)
E22/R+PLT22/S-3C93
320
E22/R+PLT22/S-3C94
320
0.18
1.25
E22/R+PLT22/S-3C95
320
1.24
1.18
E22/R+PLT22/S-3C96
320
0.14
1.0
0.38
0.75
E22/R+PLT22/S-3F3
300
0.23
0.4
E22/R+PLT22/S-3F35
300
0.2
0.3
E22/R+PLT22/S-3F4
250
E22/R+PLT22/S-3F45
250
1.
Measured at 140 C.
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
E22/R+PLT22/S-3C90
320
E22/R+PLT22/S-3C92
370
E22/R+PLT22/S-3C93
320
E22/R+PLT22/S-3C94
320
E22/R+PLT22/S-3C95
320
E22/R+PLT22/S-3C96
320
E22/R+PLT22/S-3F3
300
E22/R+PLT22/S-3F35
300
2.2
E22/R+PLT22/S-3F4
250
0.62
1.0
E22/R+PLT22/S-3F45
250
0.45
1.7
0.8
GRADE
2013 Jul 31
353
Ferroxcube
E22/6/16/R
MOUNTING PARTS
General data and ordering information
ITEM
Clamp
MATERIAL
FIGURE
TYPE NUMBER
CLM-E22/PLT22
R 0.8 max.
21.4
9
handbook, halfpage
2.5
olumns
16.3
min.
0.4
8.6 0.1
22.2 0.3
5.25
min.
CBW179
2.8 min.
CBW554
16.2 max.
22.4 min.
25.8 min.
Dimensions in mm.
Dimensions in mm.
Fig.4
2013 Jul 31
354
Ferroxcube
E32/6/20
CORES
Effective core parameters of a set of E cores
SYMBOL
PARAMETER
VALUE
handbook, halfpage
UNIT
(I/A)
0.323
mm1
Ve
effective volume
5380
mm3
Ie
effective length
41.4
mm
Ae
effective area
130
mm2
Amin
minimum area
130
mm2
13
31.75 0.64
24.9 min.
6.35
0.13
3.18 0.2 6.35
0.13
R0.25 typ.
20.32 0.41
CBW407
Dimensions in mm.
Fig.1 E32/6/20.
Effective core parameters of an E/PLT combination
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.278
mm1
Ve
effective volume
4560
mm3
Ie
effective length
35.1
mm
Ae
effective area
130
mm2
Amin
minimum area
130
mm2
mass of plate
10
handbook, halfpage
31.75 0.64
3.18 0.13
20.32 0.41
TYPE NUMBER
3C90
PLT32/20/3.2-3C90
3C92
PLT32/20/3.2-3C92
3C93
PLT32/20/3.2-3C93
3C94
PLT32/20/3.2-3C94
3C95
PLT32/20/3.2-3C95
3C96
PLT32/20/3.2-3C96
3F3
PLT32/20/3.2-3F3
3F4
PLT32/20/3.2-3F4
CBW408
Dimensions in mm.
Fig.2 PLT32/20/3.2.
2013 Jul 31
355
Ferroxcube
E32/6/20
AL
(nH)
TYPE NUMBER
160 3%(1)
41
1200
250 3%(1)
64
700
E32/6/20-3C90-E250-E
315 3%
81
550
E32/6/20-3C90-A315-E
400 5%
103
450
E32/6/20-3C90-A400-E
630 8%
E32/6/20-3C90-E160-E
162
260
6425 25%
1650
3C92
5000 25%
1290
E32/6/20-3C92
3C93
5900 25%
1520
E32/6/20-3C93
160 3%(1)
41
1200
250 3%(1)
64
700
E32/6/20-3C94-E250-E
315 3%
81
550
E32/6/20-3C94-A315-E
3C94
E32/6/20-3C90-A630-E
E32/6/20-3C90
E32/6/20-3C94-E160-E
400 5%
103
450
E32/6/20-3C94-A400-E
630 8%
162
260
E32/6/20-3C94-A630-E
6425 25%
1650
E32/6/20-3C94
3C95
7690 25%
1950
E32/6/20-3C95
3C96
6425 25%
E32/6/20-3C96
3F3
1650
160 3%(1)
41
1200
250 3%(1)
64
700
E32/6/20-3F3-E250-E
315 3%
81
550
E32/6/20-3F3-A315-E
400 5%
103
450
E32/6/20-3F3-A400-E
630 8%
162
260
E32/6/20-3F3-A630-E
5900 25%
3F4
E32/6/20-3F3-E160-E
1520
160 3%(1)
41
1200
250 3%(1)
64
700
E32/6/20-3F4-E250-E
315 3%
81
550
E32/6/20-3F4-A315-E
E32/6/20-3F3
E32/6/20-3F4-E160-E
400 5%
103
450
E32/6/20-3F4-A400-E
630 8%
162
260
E32/6/20-3F4-A630-E
3200 25%
820
E32/6/20-3F4
Note
1. Measured in combination with an equal gapped E core half, clamping force for AL measurements, 30 10 N.
2013 Jul 31
356
Ferroxcube
E32/6/20
AL
(nH)
AIR GAP
(m)
160 3%
35
1200
E32/6/20-3C90-A160-P
250 3%
55
700
E32/6/20-3C90-A250-P
315 3%
69
550
E32/6/20-3C90-A315-P
400 5%
87
450
E32/6/20-3C90-A400-P
E32/6/20-3C90-A630-P
630 8%
7350 25%
138
260
1610
E32/6/20-3C90
E32/6/20-3C92
3C92
5760 25%
1270
3C93
6780 25%
1500
3C94
160 3%
35
1200
250 3%
55
700
E32/6/20-3C94-A250-P
69
550
E32/6/20-3C94-A315-P
400 5%
87
450
E32/6/20-3C94-A400-P
630 8%
138
260
E32/6/20-3C94-A630-P
1610
E32/6/20-3C94
E32/6/20-3C95
3C95
8750 25%
1880
3C96
7350 25%
1610
35
1200
160 3%
2013 Jul 31
E32/6/20-3C96
E32/6/20-3F3-A160-P
250 3%
55
700
E32/6/20-3F3-A250-P
315 3%
69
550
E32/6/20-3F3-A315-P
400 5%
87
450
E32/6/20-3F3-A400-P
630 8%
138
260
E32/6/20-3F3-A630-P
1490
160 3%
35
1200
E32/6/20-3F4-A160-P
250 3%
55
700
E32/6/20-3F4-A250-P
6780 25%
3F4
E32/6/20-3C93
E32/6/20-3C94-A160-P
315 3%
7350 25%
3F3
TYPE NUMBER
E32/6/20-3F3
315 3%
69
550
E32/6/20-3F4-A315-P
400 5%
87
450
E32/6/20-3F4-A400-P
630 8%
138
260
E32/6/20-3F4-A630-P
3700 25%
810
357
E32/6/20-3F4
Ferroxcube
E32/6/20
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
E+E32-3C90
320
0.65
E+PLT32-3C90
320
0.55
E+E32-3C92
370
0.48
3.4
E+PLT32-3C92
370
0.41
2.9
E+E32-3C93
320
0.48(1)
3.4(1)
E+PLT32-3C93
320
0.41(1)
2.9(1)
E+E32-3C94
320
0.48
3.4
E+PLT32-3C94
320
0.41
2.9
E+E32-3C95
320
3.17
3.0
E+PLT32-3C95
320
2.69
2.55
GRADE
E+E32-3C96
320
0.36
2.6
0.9
E+PLT32-3C96
320
0.3
2.2
0.8
E+E32-3F3
300
0.65
1.0
E+PLT32-3F3
300
0.6
0.85
E+E32-3F4
250
E+PLT32-3F4
250
1.
Measured at 140 C.
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
E+E32-3C96
320
2.0
E+PLT32-3C96
320
1.7
E+E32-3F3
300
E+PLT32-3F3
300
E+E32-3F4
250
1.6
2.5
E+PLT32-3F4
250
1.36
2.2
GRADE
2013 Jul 31
T = 100 C
358
Ferroxcube
E32/6/20/R
CORES
Effective core parameters of an E/PLT combination
SYMBOL
(I/A)
PARAMETER
core factor (C1)
VALUE
UNIT
0.278
mm1
Ve
effective volume
4560
mm3
Ie
effective length
35.1
mm
Ae
effective area
130
mm2
minimum area
119
mm2
13
mass of plate
10
Amin
31.75 0.64
24.9 min.
6.35
0.13
3.18 0.2
5.3
6.35
0.13
R0.25 typ.
TYPE NUMBER
3C90
PLT32/20/3.2/R-3C90
3C92
PLT32/20/3.2/R-3C92
3C93
PLT32/20/3.2/R-3C93
3C94
PLT32/20/3.2/R-3C94
3C95
PLT32/20/3.2/R-3C95
3C96
PLT32/20/3.2/R-3C96
3F3
PLT32/20/3.2/R-3F3
3F4
PLT32/20/3.2/R-3F4
5 +0.2
0
20.32 0.41
MFP055
Dimensions in mm.
Fig.1 E32/6/20/R.
31.75 0.64
3.18 0.13
2.13
+0.2
5 0
MFP056
Dimensions in mm.
Fig.2 PLT32/20/3.2/R.
2013 Jul 31
359
20.32 0.41
Ferroxcube
E32/6/20/R
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
160 3%
35
1200
E32/6/20/R-3C90-A160-P
250 3%
55
700
E32/6/20/R-3C90-A250-P
315 3%
69
550
E32/6/20/R-3C90-A315-P
400 5%
87
450
E32/6/20/R-3C90-A400-P
E32/6/20/R-3C90-A630-P
138
260
7350 25%
630 8%
1610
E32/6/20/R-3C90
3C92
5760 25%
1270
E32/6/20/R-3C92
3C93
6780 25%
1500
3C94
160 3%
35
1200
250 3%
55
700
E32/6/20/R-3C94-A250-P
315 3%
69
550
E32/6/20/R-3C94-A315-P
400 5%
87
450
E32/6/20/R-3C94-A400-P
630 8%
138
260
E32/6/20/R-3C94-A630-P
1610
E32/6/20/R-3C94
E32/6/20/R-3C95
7350 25%
3C95
8750 25%
1880
3C96
7350 25%
1610
35
1200
3F3
160 3%
2013 Jul 31
E32/6/20/R-3C96
E32/6/20/R-3F3-A160-P
250 3%
55
700
E32/6/20/R-3F3-A250-P
315 3%
69
550
E32/6/20/R-3F3-A315-P
400 5%
87
450
E32/6/20/R-3F3-A400-P
630 8%
138
260
E32/6/20/R-3F3-A630-P
1490
160 3%
35
1200
E32/6/20/R-3F4-A160-P
250 3%
55
700
E32/6/20/R-3F4-A250-P
6780 25%
3F4
E32/6/20/R-3C93
E32/6/20/R-3C94-A160-P
E32/6/20/R-3F3
315 3%
69
550
E32/6/20/R-3F4-A315-P
400 5%
87
450
E32/6/20/R-3F4-A400-P
630 8%
138
260
E32/6/20/R-3F4-A630-P
3700 25%
810
360
E32/6/20/R-3F4
Ferroxcube
E32/6/20/R
GRADE
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
E32/R+PLT32/R-3C90
320
0.55
E32/R+PLT32/R-3C92
370
0.41
f = 400 kHz;
= 50 mT;
B
T = 100 C
2.9
2.9(1)
E32/R+PLT32/R-3C93
320
E32/R+PLT32/R-3C94
320
0.41
2.9
E32/R+PLT32/R-3C95
320
2.69
2.55
E32/R+PLT32/R-3C96
320
0.3
2.2
0.8
E32/R+PLT32/R-3F3
300
0.6
0.85
E32/R+PLT32/R-3F4
250
1.
0.41(1)
f = 100 kHz;
= 200 mT;
B
T = 100 C
Measured at 140 C.
GRADE
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
E32/R+PLT32/R-3C90
320
E32/R+PLT32/R-3C92
370
E32/R+PLT32/R-3C93
320
E32/R+PLT32/R-3C94
320
E32/R+PLT32/R-3C95
320
E32/R+PLT32/R-3C96
320
1.7
E32/R+PLT32/R-3F3
300
E32/R+PLT32/R-3F4
250
1.36
2.2
2013 Jul 31
T = 100 C
361
Ferroxcube
E38/8/25
CORES
Effective core parameters of a set of E cores
SYMBOL
PARAMETER
VALUE
(I/A)
0.272
mm1
Ve
effective volume
10 200
mm3
Ie
effective length
52.4
mm
Ae
effective area
194
mm2
Amin
minimum area
194
mm2
25
38.1 0.76
handbook, halfpage
UNIT
30.23 min.
7.6
0.2
4.45 0.13 8.26
0.13
25.4 0.51
CBW409
Dimensions in mm.
PARAMETER
VALUE
UNIT
(I/A)
0.226
mm1
Ve
effective volume
8460
mm3
Ie
effective length
43.7
mm
Ae
effective area
194
mm2
Amin
minimum area
194
mm2
mass of plate
18
handbook, halfpage
38.1 0.76
3.81 0.13
25.4 0.51
TYPE NUMBER
3C90
PLT38/25/3.8-3C90
3C92
PLT38/25/3.8-3C92
3C93
PLT38/25/3.8-3C93
3C94
PLT38/25/3.8-3C94
3C95
PLT38/25/3.8-3C95
3F3
PLT38/25/3.8-3F3
3F4
PLT38/25/3.8-3F4
CBW410
Dimensions in mm.
Fig.2 PLT38/25/3.8.
2013 Jul 31
362
Ferroxcube
E38/8/25
AL
(nH)
TYPE NUMBER
250 3%(1)
54
1100
E38/8/25-3C90-E250-E
315 3%(1)
68
850
E38/8/25-3C90-E315-E
400 3%(1)
86
650
E38/8/25-3C90-E400-E
136
400
E38/8/25-3C90-A630-E
1000 10%
216
250
7940 25%
1720
630 5%
E38/8/25-3C90-A1000-E
E38/8/25-3C90
3C92
6100 25%
1320
E38/8/25-3C92
3C93
7250 25%
1570
E38/8/25-3C93
250 3%(1)
54
1100
E38/8/25-3C94-E250-E
315 3%(1)
68
850
E38/8/25-3C94-E315-E
400 3%(1)
86
650
E38/8/25-3C94-E400-E
E38/8/25-3C94-A630-E
3C94
3C95
3F3
630 5%
136
400
1000 10%
216
250
7940 25%
1720
E38/8/25-3C94
9600 25%
E38/8/25-3C95
2060
250 3%(1)
54
1100
E38/8/25-3F3-E250-E
315 3%(1)
68
850
E38/8/25-3F3-E315-E
400 3%(1)
86
650
E38/8/25-3F3-E400-E
136
400
E38/8/25-3F3-A630-E
1000 10%
216
250
E38/8/25-3F3-A1000-E
7250 25%
1570
250 3%(1)
54
1100
E38/8/25-3F4-E250-E
315 3%(1)
68
850
E38/8/25-3F4-E315-E
400 3%(1)
86
650
E38/8/25-3F4-E400-E
136
400
E38/8/25-3F4-A630-E
1000 10%
216
250
E38/8/25-3F4-A1000-E
3880 25%
840
630 5%
3F4
E38/8/25-3C94-A1000-E
630 5%
E38/8/25-3F3
E38/8/25-3F4
Note
1. Measured in combination with an equal gapped core half, clamping force for AL measurements, 40 15 N.
2013 Jul 31
363
Ferroxcube
E38/8/25
AL
(nH)
AIR GAP
(m)
250 3%
45
1100
E38/8/25-3C90-A250-P
315 3%
57
850
E38/8/25-3C90-A315-P
400 3%
72
650
E38/8/25-3C90-A400-P
630 5%
113
400
E38/8/25-3C90-A630-P
1000 10%
180
250
E38/8/25-3C90-A1000-P
9250 25%
1660
E38/8/25-3C90
E38/8/25-3C92
3C92
7150 25%
1290
3C93
8500 25%
1530
3C94
250 3%
45
1100
3C95
3F3
3F4
2013 Jul 31
TYPE NUMBER
E38/8/25-3C93
E38/8/25-3C94-A250-P
315 3%
57
850
E38/8/25-3C94-A315-P
400 3%
72
650
E38/8/25-3C94-A400-P
630 5%
113
400
E38/8/25-3C94-A630-P
1000 10%
180
250
E38/8/25-3C94-A1000-P
9250 25%
1660
11200 25%
1990
45
1100
250 3%
E38/8/25-3C94
E38/8/25-3C95
E38/8/25-3F3-A250-P
315 3%
57
850
E38/8/25-3F3-A315-P
400 3%
72
650
E38/8/25-3F3-A400-P
630 5%
113
400
E38/8/25-3F3-A630-P
1000 10%
180
250
E38/8/25-3F3-A1000-P
8500 25%
1520
45
1100
250 3%
E38/8/25-3F3
E38/8/25-3F4-A250-P
315 3%
57
850
E38/8/25-3F4-A315-P
400 3%
72
650
E38/8/25-3F4-A400-P
E38/8/25-3F4-A630-P
630 5%
113
400
1000 10%
180
250
4600 25%
830
364
E38/8/25-3F4-A1000-P
E38/8/25-3F4
Ferroxcube
E38/8/25
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
E+E38-3C90
320
1.25
E+PLT38-3C90
320
1.05
E+E38-3C92
370
1.0
6.0
E+PLT38-3C92
370
0.85
5.0
E+E38-3C93
320
1.0(1)
6.0 (1)
E+PLT38-3C93
320
0.85(1)
5.0 (1)
E+E38-3C94
320
1.0
6.0
E+PLT38-3C94
320
0.85
5.0
E+E38-3C95
320
6.43
6.12
E+PLT38-3C95
320
5.0
4.74
E+E38-3F3
300
1.3
2.0
E+PLT38-3F3
300
1.1
1.65
E+E38-3F4
250
E+PLT38-3F4
250
1.
Measured at 140 C.
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
E+E38-3F4
250
3.0
5.0
E+PLT38-3F4
250
2.5
4.0
2013 Jul 31
365
Ferroxcube
E43/10/28
CORES
Effective core parameters of a set of E cores
SYMBOL
PARAMETER
VALUE
(I/A)
0.276
mm1
Ve
effective volume
13 900
mm3
Ie
effective length
61.1
mm
Ae
effective area
229
mm2
Amin
minimum area
229
mm2
35
43.2 0.9
handbook, halfpage
UNIT
34.7 min.
8.1
0.2
5.4 0.13
9.5
0.13
27.9 0.6
CBW411
Dimensions in mm.
PARAMETER
VALUE
UNIT
(I/A)
0.226
mm1
Ve
effective volume
11 500
mm3
Ie
effective length
50.4
mm
Ae
effective area
229
mm2
Amin
minimum area
229
mm2
24
43.2 0.9
handbook, halfpage
4.1 0.13
Ordering information
GRADE
27.9 0.6
TYPE NUMBER
3C90
PLT43/28/4.1-3C90
3C92
PLT43/28/4.1-3C92
3C93
PLT43/28/4.1-3C93
3C94
PLT43/28/4.1-3C94
3C95
PLT43/28/4.1-3C95
3F3
PLT43/28/4.1-3F3
3F4
PLT43/28/4.1-3F4
Dimensions in mm.
Fig.2 PLT43/28/4.1.
2013 Jul 31
366
CBW412
Ferroxcube
E43/10/28
AL
(nH)
TYPE NUMBER
250 3%(1)
55
1100
E43/10/28-3C90-E250-E
315 3%(1)
69
800
E43/10/28-3C90-E315-E
400 3%(1)
87
700
E43/10/28-3C90-E400-E
138
400
E43/10/28-3C90-A630-E
1000 10%
219
250
8030 25%
1710
630 5%
E43/10/28-3C90-A1000-E
E43/10/28-3C90
3C92
6300 25%
1380
E43/10/28-3C92
3C93
7310 25%
1610
E43/10/28-3C93
250 3%(1)
55
1100
E43/10/28-3C94-E250-E
315 3%(1)
69
800
E43/10/28-3C94-E315-E
400 3%(1)
87
700
E43/10/28-3C94-E400-E
E43/10/28-3C94-A630-E
3C94
3C95
3F3
630 5%
138
400
1000 10%
219
250
8030 25%
1710
E43/10/28-3C94
9700 25%
E43/10/28-3C95
2060
250 3%(1)
55
1100
E43/10/28-3F3-E250-E
315 3%(1)
69
800
E43/10/28-3F3-E315-E
400 3%(1)
87
700
E43/10/28-3F3-E400-E
138
400
E43/10/28-3F3-A630-E
1000 10%
219
250
E43/10/28-3F3-A1000-E
7310 25%
1600
250 3%(1)
55
1100
E43/10/28-3F4-E250-E
315 3%(1)
69
800
E43/10/28-3F4-E315-E
400 3%(1)
87
700
E43/10/28-3F4-E400-E
138
400
E43/10/28-3F4-A630-E
1000 10%
219
250
E43/10/28-3F4-A1000-E
3860 25%
850
630 5%
3F4
E43/10/28-3C94-A1000-E
630 5%
E43/10/28-3F3
E43/10/28-3F4
Note
1. Measured in combination with an equal gapped E core half, clamping force for AL measurements, 40 20 N.
2013 Jul 31
367
Ferroxcube
E43/10/28
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
250 3%
45
1100
E43/10/28-3C90-A250-P
315 3%
57
800
E43/10/28-3C90-A315-P
400 3%
72
700
E43/10/28-3C90-A400-P
630 5%
113
400
E43/10/28-3C90-A630-P
1000 10%
180
250
E43/10/28-3C90-A1000-P
9250 25%
1710
E43/10/28-3C90
3C92
7460 25%
1340
E43/10/28-3C92
3C93
8700 25%
1560
3C94
250 3%
45
1100
3C95
3F3
3F4
2013 Jul 31
E43/10/28-3C93
E43/10/28-3C94-A250-P
315 3%
57
800
E43/10/28-3C94-A315-P
400 3%
72
700
E43/10/28-3C94-A400-P
630 5%
113
400
E43/10/28-3C94-A630-P
1000 10%
180
250
E43/10/28-3C94-A1000-P
9250 25%
1710
11060 25%
1940
45
1100
250 3%
E43/10/28-3C94
E43/10/28-3C95
E43/10/28-3F3-A250-P
315 3%
57
800
E43/10/28-3F3-A315-P
400 3%
72
700
E43/10/28-3F3-A400-P
630 5%
113
400
E43/10/28-3F3-A630-P
1000 10%
180
250
E43/10/28-3F3-A1000-P
8700 25%
1560
45
1100
250 3%
E43/10/28-3F3
E43/10/28-3F4-A250-P
315 3%
57
800
E43/10/28-3F4-A315-P
400 3%
72
700
E43/10/28-3F4-A400-P
630 5%
113
400
E43/10/28-3F4-A630-P
1000 10%
180
250
E43/10/28-3F4-A1000-P
4660 25%
850
368
E43/10/28-3F4
Ferroxcube
E43/10/28
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
E+E43-3C90
320
1.8
E+PLT43-3C90
320
1.5
E+E43-3C92
370
1.4
8.0
E+PLT43-3C92
370
1.2
7.0
E+E43-3C93
320
1.4 (1)
8.0(1)
E+PLT43-3C93
320
1.2 (1)
7.0(1)
E+E43-3C94
320
1.4
8.0
E+PLT43-3C94
320
1.2
7.0
E+E43-3C95
320
8.76
8.34
E+PLT43-3C95
320
7.25
6.9
E+E43-3F3
300
1.8
2.7
E+PLT43-3F3
300
1.5
2.25
E+E43-3F4
250
E+PLT43-3F4
250
1.
Measured at 140 C.
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
E+E43-3F4
250
4.2
6.5
E+PLT43-3F4
250
3.5
5.5
2013 Jul 31
369
Ferroxcube
E58/11/38
CORES
Effective core parameters of a set of E cores
SYMBOL
PARAMETER
VALUE
(I/A)
0.268
mm1
Ve
effective volume
24 600
mm3
Ie
effective length
80.6
mm
Ae
effective area
308
mm2
Amin
minimum area
308
mm2
62
58.4 1.2
handbook, halfpage
UNIT
50 min.
8.1
0.2
6.5 0.13 10.5
0.13
38.1 0.8
CBW413
Dimensions in mm.
PARAMETER
VALUE
UNIT
(I/A)
0.224
mm1
Ve
effective volume
20 800
mm3
Ie
effective length
67.7
mm
Ae
effective area
310
mm2
Amin
minimum area
310
mm2
44
handbook, halfpage
58.4 1.2
4.1 0.13
38.1 0.8
TYPE NUMBER
3C90
PLT58/38/4-3C90
3C92
PLT58/38/4-3C92
3C93
PLT58/38/4-3C93
3C94
PLT58/38/4-3C94
3C95
PLT58/38/4-3C95
3F3
PLT58/38/4-3F3
3F4
PLT58/38/4-3F4
CBW414
Dimensions in mm.
2013 Jul 31
370
Ferroxcube
E58/11/38
AL
(nH)
TYPE NUMBER
315 3%(1)
67
1 400
E58/11/38-3C90-E315-E
400 3%(1)
85
1 100
E58/11/38-3C90-E400-E
5%(1)
134
650
E58/11/38-3C90-E630-E
213
400
E58/11/38-3C90-A1000-E
1600 10%
341
200
8480 25%
1800
630
1000 5%
E58/11/38-3C90-A1600-E
E58/11/38-3C90
3C92
6600 25%
1410
E58/11/38-3C92
3C93
7710 25%
1640
E58/11/38-3C93
315 3%(1)
67
1 400
E58/11/38-3C94-E315-E
400 3%(1)
85
1 100
E58/11/38-3C94-E400-E
5%(1)
3C94
134
650
E58/11/38-3C94-E630-E
1000 5%
213
400
E58/11/38-3C94-A1000-E
1600 10%
341
200
8480 25%
1800
E58/11/38-3C94
10330 25%
E58/11/38-3C95
630
3C95
3F3
3F4
E58/11/38-3C94-A1600-E
2150
315 3%(1)
67
1 400
400 3%(1)
85
1 100
E58/11/38-3F3-E400-E
630 5%(1)
134
650
E58/11/38-3F3-E630-E
E58/11/38-3F3-E315-E
1000 5%
213
400
E58/11/38-3F3-A1000-E
1600 10%
341
200
E58/11/38-3F3-A1600-E
7710 25%
1640
67
1 400
400 3%(1)
85
1 100
E58/11/38-3F4-E400-E
630 5%(1)
134
650
E58/11/38-3F4-E630-E
315 3%(1)
E58/11/38-3F3
E58/11/38-3F4-E315-E
1000 5%
213
400
E58/11/38-3F4-A1000-E
1600 10%
341
200
E58/11/38-3F4-A1600-E
4030 25%
860
E58/11/38-3F4
Note
1. Measured in combination with an equal gapped E core half, clamping force for AL measurements, 40 20 N.
2013 Jul 31
371
Ferroxcube
E58/11/38
AL
(nH)
AIR GAP
(m)
315 3%
56
1 400
E58/11/38-3C90-A315-P
400 3%
71
1 100
E58/11/38-3C90-A400-P
630 5%
112
650
E58/11/38-3C90-A630-P
1000 5%
178
400
E58/11/38-3C90-A1000-P
1600 10%
285
200
E58/11/38-3C90-A1600-P
9970 25%
1780
E58/11/38-3C90
E58/11/38-3C92
3C92
7770 25%
1390
3C93
9070 25%
1620
3C94
315 3%
56
1 400
3C95
3F3
3F4
2013 Jul 31
TYPE NUMBER
E58/11/38-3C93
E58/11/38-3C94-A315-P
400 3%
71
1 100
E58/11/38-3C94-A400-P
630 5%
112
650
E58/11/38-3C94-A630-P
1000 5%
178
400
E58/11/38-3C94-A1000-P
1600 10%
285
200
E58/11/38-3C94-A1600-P
9970 25%
1780
12090 25%
2100
56
1 400
315 3%
E58/11/38-3C94
E58/11/38-3C95
E58/11/38-3F3-A315-P
400 3%
71
1 100
E58/11/38-3F3-A400-P
630 5%
112
650
E58/11/38-3F3-A630-P
1000 5%
178
400
E58/11/38-3F3-A1000-P
1600 10%
285
200
E58/11/38-3F3-A1600-P
9070 25%
1620
56
1 400
315 3%
E58/11/38-3F3
E58/11/38-3F4-A315-P
400 3%
71
1 100
E58/11/38-3F4-A400-P
630 5%
112
650
E58/11/38-3F4-A630-P
1000 5%
178
400
E58/11/38-3F4-A1000-P
1600 10%
285
200
E58/11/38-3F4-A1600-P
4780 25%
850
372
E58/11/38-3F4
Ferroxcube
E58/11/38
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
E+E58-3C90
320
3.0
E+PLT58-3C90
320
2.6
E+E58-3C92
370
2.4
15
E+PLT58-3C92
370
2.0
13
E+E58-3C93
320
2.4(1)
15(1)
E+PLT58-3C93
320
2.0(1)
13(1)
E+E58-3C94
320
2.4
15
E+PLT58-3C94
320
2.0
13
E+E58-3C95
320
15.5
14.8
E+PLT58-3C95
320
13.1
12.5
E+E58-3F3
300
3.0
4.7
E+PLT58-3F3
300
2.6
4.0
E+E58-3F4
250
E+PLT58-3F4
250
1.
Measured at 140 C.
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
E+E58-3F4
250
7.4
12
E+PLT58-3F4
250
6.25
10
2013 Jul 31
373
Ferroxcube
E64/10/50
CORES
Effective core parameters of a set of E cores
SYMBOL
PARAMETER
VALUE
handbook, halfpage
(I/A)
0.156
mm1
Ve
effective volume
40 700
mm3
Ie
effective length
79.9
mm
Ae
effective area
519
mm2
Amin
minimum area
519
mm2
100
64.0 1.3
53.8 1.1
UNIT
10.2
0.2
5.1 0.13 10.2
0.13
R0.25 max. typ.
50.8 1
CBW415
Dimensions in mm.
Fig.1 E64/10/50.
Effective core parameters of an E/PLT combination
SYMBOL
PARAMETER
VALUE
UNIT
mm1
(I/A)
Ve
effective volume
35 500
mm3
Ie
effective length
69.7
mm
Ae
effective area
519
mm2
Amin
minimum area
519
mm2
mass of plate
78
0.136
handbook, halfpage
64 1.3
5.08 0.13
TYPE NUMBER
3C90
PLT64/50/5-3C90
3C92
PLT64/50/5-3C92
3C93
PLT64/50/5-3C93
3C94
PLT64/50/5-3C94
3C95
PLT64/50/5-3C95
3F3
PLT64/50/5-3F3
3F4
PLT64/50/5-3F4
50.8 1
CBW416
Dimensions in mm.
2013 Jul 31
374
Ferroxcube
E64/10/50
AL
(nH)
TYPE NUMBER
630 3%(1)
78
1100
1000 3%(1)
124
660
E64/10/50-3C90-E1000-E
1600 5%
199
385
E64/10/50-3C90-A1600-E
2500 10%
310
225
E64/10/50-3C90-A2500-E
E64/10/50-3C90-A3150-E
E64/10/50-3C90-E630-E
3150 10%
391
170
14640 25%
1820
E64/10/50-3C90
3C92
11200 25%
1390
E64/10/50-3C92
3C93
13300 25%
E64/10/50-3C93
3C94
3C95
3F3
3F4
1650
630 3%(1)
78
1100
1000 3%(1)
124
660
E64/10/50-3C94-E1000-E
1600 5%
199
385
E64/10/50-3C94-A1600-E
E64/10/50-3C94-E630-E
2500 10%
310
225
E64/10/50-3C94-A2500-E
3150 10%
391
170
E64/10/50-3C94-A3150-E
14640 25%
1820
E64/10/50-3C94
17890 25%
2190
E64/10/50-3C95
630 3%(1)
78
1100
1000 3%(1)
124
660
E64/10/50-3F3-E1000-E
1600 5%
199
385
E64/10/50-3F3-A1600-E
2500 10%
310
225
E64/10/50-3F3-A2500-E
3150 10%
391
170
E64/10/50-3F3-A3150-E
13300 25%
1650
630 3%(1)
78
1100
1000 3%(1)
124
660
E64/10/50-3F4-E1000-E
1600 5%
199
385
E64/10/50-3F4-A1600-E
E64/10/50-3F3-E630-E
E64/10/50-3F3
E64/10/50-3F4-E630-E
2500 10%
310
225
E64/10/50-3F4-A2500-E
3150 10%
391
170
E64/10/50-3F4-A3150-E
6960 25%
860
E64/10/50-3F4
Note
1. Measured in combination with an equal-gapped core half, clamping force for AL measurements, 100 30 N.
2013 Jul 31
375
Ferroxcube
E64/10/50
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
630 3%
78
1100
1000 3%
124
660
E64/10/50-3C90-A1000-P
1600 5%
199
385
E64/10/50-3C90-A1600-P
2500 10%
310
225
E64/10/50-3C90-A2500-P
3150 10%
391
170
E64/10/50-3C90-A3150-P
16540 25%
1790
E64/10/50-3C90
3C92
12700 25%
1370
E64/10/50-3C92
3C93
15050 25%
1630
E64/10/50-3C93
3C94
630 3%
78
1100
1000 3%
124
660
E64/10/50-3C94-A1000-P
1600 5%
199
385
E64/10/50-3C94-A1600-P
2500 10%
310
225
E64/10/50-3C94-A2500-P
3150 10%
391
170
E64/10/50-3C94-A3150-P
16540 25%
1790
E64/10/50-3C94
20150 25%
E64/10/50-3C95
3C90
3C95
3F3
3F4
2013 Jul 31
E64/10/50-3C90-A630-P
E64/10/50-3C94-A630-P
2150
630 3%
78
1100
1000 3%
124
660
E64/10/50-3F3-A1000-P
1600 5%
199
385
E64/10/50-3F3-A1600-P
2500 10%
310
225
E64/10/50-3F3-A2500-P
3150 10%
391
170
E64/10/50-3F3-A3150-P
15050 25%
E64/10/50-3F3-A630-P
1630
630 3%
78
1100
1000 3%
124
660
E64/10/50-3F4-A1000-P
1600 5%
199
385
E64/10/50-3F4-A1600-P
2500 10%
310
225
E64/10/50-3F4-A2500-P
3150 10%
391
170
E64/10/50-3F4-A3150-P
7920 25%
860
376
E64/10/50-3F3
E64/10/50-3F4-A630-P
E64/10/50-3F4
Ferroxcube
E64/10/50
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
E+E64-3C90
320
4.8
E+PLT64-3C90
320
4.2
E+E64-3C92
370
3.6
25
E+PLT64-3C92
370
3.2
23
E+E64-3C93
320
3.6(1)
25(1)
E+PLT64-3C93
320
3.2(1)
23(1)
E+E64-3C94
320
3.6
25
E+PLT64-3C94
320
3.2
23
E+E64-3C95
320
25.6
24.4
E+PLT64-3C95
320
22.4
21.3
E+E64-3F3
300
4.8
7.8
E+PLT64-3F3
300
4.2
6.8
E+E64-3F4
250
E+PLT64-3F4
250
1.
Measured at 140 C.
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
E+E64-3F4
250
E+PLT64-3F4
250
GRADE
2013 Jul 31
377
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
12
20
10.5
17
Ferroxcube
Soft Ferrites
CBW267
2013 Jul 31
378
Ferroxcube
Soft Ferrites
Ve
(mm3)
Ae
(mm2)
EC 41 3C90 A 250 X
MASS
(g)
special version
EC35
6530
84.3
19
EC41
10 800
121
30
EC52
18 800
180
56
EC70
40 100
279
127
gap type:
A unsymmetrical gap to AL value
E symmetrical gap to AL value
G mechanical gap
core material
core size
core type
CBW082
C P EC35 1S
number of sections
associated core type
plastic material type:
P thermoplastic
S thermoset
coil former (bobbin)
CBW083
2013 Jul 31
379
Ferroxcube
EC35
CORE SETS
Effective core parameters
SYMBOL
handbook, halfpage
PARAMETER
VALUE
UNIT
12.3
0.4
17.3
0.15
(I/A)
0.918
mm1
Ve
effective volume
6530
mm3
Ie
effective length
77.4
mm
Ae
effective area
84.3
mm2
35.3 max
Amin
minimum area
71
mm2
19
22.75 0.55
9.5 0.3
9.5
0.3
MGC397
Dimensions in mm.
AL
(nH)
TYPE NUMBER
100 3% (1)
73
1 470
160 3% (1)
117
820
EC35-3C81-E160
250 3%
184
470
EC35-3C81-A250
315 5%
231
350
EC35-3C81-A315
400 10%
290
260
EC35-3C81-A400
2 250
3C90
EC35-3C81-E100
1640
3% (1)
73
1 470
160 3% (1)
117
820
EC35-3C90-E160
250 3%
184
470
EC35-3C90-A250
315 5%
231
350
EC35-3C90-A315
400 10%
290
260
EC35-3C90-A400
2100 25%
1530
100
EC35-3C81
EC35-3C90-E100
EC35-3C90
Note
1. Measured in combination with an equal gapped core half (symmetrical air gap).
Properties of core sets under power conditions
B (mT) at
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C81
320
1.40
3C90
320
0.79
0.83
GRADE
2013 Jul 31
380
f = 100 kHz;
= 100 mT;
B
T = 100 C
Ferroxcube
EC35
COIL FORMERS
General data 8-slots EC35 coil former for insertable pins
PARAMETER
SPECIFICATION
31.35 max
34.0 ref
23.5
23.75 max
21.9 max
12.2
7.6
MGB689
21.5
9.85 min
28.75
max
30.5 0.25
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
97.1
21.5
53.1
8190
2013 Jul 31
381
TYPE NUMBER
CP-EC35-1S
Ferroxcube
EC35
MOUNTING PARTS
General data and ordering information
ITEM
REMARKS
Insertable pins
MOUNT
FIGURE
TYPE NUMBER
general
PIN-EC
horizontal
PIN/H-EC
BPL2-EC35
BPL4-EC35
Clamp
CLM/U-EC35
15.8
handbook, halfpage
handbook, halfpage
1.6 2.35
3.15
15.6
3.0 1.5
0.6
1.5
0.3
0.5
MGB545
MGB546
Dimensions in mm.
Dimensions in mm.
handbook, halfpage
39.4
handbook, halfpage
31.6
2.65
54
42.5
31.6
2.65
9.5
2.65
2.65
4.45
9.5
3.8
MGB540
MGB541
Dimensions in mm.
Dimensions in mm.
2013 Jul 31
382
2.2
Ferroxcube
EC35
handbook, halfpage
2.1
42.2
3-48 NC 2A
THD 2 PLACES
10.2
min
32.4
MGB536
Dimensions in mm.
2013 Jul 31
383
Ferroxcube
EC41
CORE SETS
Effective core parameters
SYMBOL
handbook, halfpage
PARAMETER
VALUE
UNIT
13.9
0.4
19.5
0.15
(I/A)
0.735
mm1
Ve
effective volume
10 800
mm3
Ie
effective length
89.3
mm
Ae
effective area
121
mm2
41.6 max
27.05 0.8
11.6 0.3
Amin
minimum area
106
mm2
30
g
11.6
0.3
MGC402
Dimensions in mm.
AL
(nH)
TYPE NUMBER
100 3% (1)
59
2 200
EC41-3C81-E100
160 3% (1)
94
1 220
EC41-3C81-E160
3% (1)
EC41-3C81-E250
147
705
315 5%
186
530
EC41-3C81-A315
400 5%
236
390
EC41-3C81-A400
250
2 800
3C90
1640
59
2 200
EC41-3C90-E100
160 3% (1)
94
1 220
EC41-3C90-E160
250 3% (1)
147
705
EC41-3C90-E250
315 5%
186
530
EC41-3C90-A315
236
390
EC41-3C90-A400
1580
100 3% (1)
400 5%
2700 25%
EC41-3C81
EC41-3C90
Note
1. Measured in combination with an equal gapped core half (symmetrical air gap).
Properties of core sets under power conditions
B (mT) at
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
3C81
320
2.2
3C90
320
1.3
1.4
GRADE
2013 Jul 31
384
Ferroxcube
EC41
COIL FORMERS
General data 8-slots EC41 coil former for insertable pins
PARAMETER
SPECIFICATION
36.4 max
38.5 ref
28.5
26.95 max
25.8 max
14.1
7.6
MGB690
24.5
11.9 min
28.8
max
33 0.25
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
137.5
24.5
62.4
16600
2013 Jul 31
385
TYPE NUMBER
CP-EC41-1S
Ferroxcube
EC41
MOUNTING PARTS
General data and ordering information
ITEM
REMARKS
Insertable pins
Clamp
MOUNT
FIGURE
3
PIN-EC
horizontal
PIN/H-EC
vertical
PIN/V-EC41
15.8
handbook, halfpage
handbook, halfpage
1.6 2.35
3.15
TYPE NUMBER
general
CLM/U-EC41
BPL4-EC41
15.6
3.0 1.5
0.6
1.5
0.3
2.2
0.5
MGB545
MGB546
Dimensions in mm.
Dimensions in mm.
handbook, halfpage
handbook, halfpage
16.9
6.7
2.85
1.6 3.1
2.4
47
4-40 NC 2A
THD 2 PLACES
10.2
min
0.5
MGB547
38.1
Dimensions in mm.
Dimensions in mm.
2013 Jul 31
386
MGB537
Ferroxcube
handbook, halfpage
EC41
63.5
50.8
37.2
3
11.1
4.7
1
MGB542
Dimensions in mm.
2013 Jul 31
387
Ferroxcube
EC52
CORE SETS
Effective core parameters
SYMBOL
handbook, halfpage
PARAMETER
VALUE
UNIT
15.9
0.4
24.2
0.15
(I/A)
0.581
mm1
Ve
effective volume
18 800
mm3
Ie
effective length
105
mm
Ae
effective area
180
mm2
52.2 1.3
33 0.9
13.4 0.35
Amin
minimum area
141
mm2
56
g
13.4
0.35
MGC190
Dimensions in mm.
Core halves
AL measured in combination with an non-gapped core half, unless stated otherwise.
GRADE
3C81
AL
(nH)
TYPE NUMBER
160 3% (1)
74
1 920
250 3% (1)
116
1 100
EC52-3C81-E250
315 3% (1)
147
830
EC52-3C81-E315
EC52-3C81-E160
400 3%
185
620
EC52-3C81-A400
630 5%
290
350
EC52-3C81-A630
3 550
3C90
1640
3% (1)
74
1 920
250 3% (1)
116
1 100
EC52-3C90-E250
315 3% (1)
147
830
EC52-3C90-E315
160
EC52-3C81
EC52-3C90-E160
400 3%
185
620
EC52-3C90-A400
630 5%
290
350
EC52-3C90-A630
1660
3600 25%
EC52-3C90
Note
1. Measured in combination with an equal gapped core half (symmetrical air gap).
Properties of core sets under power conditions
B (mT) at
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C81
320
3.8
3C90
320
2.3
2.4
GRADE
2013 Jul 31
388
f = 100 kHz;
= 100 mT;
B
T = 100 C
Ferroxcube
EC52
COIL FORMERS
General data 12-slots EC52 coil former for insertable pins
PARAMETER
SPECIFICATION
41.5 max
44.4 ref
33.6
31.05 max
31.7 max
16.2
7.6
13.8 min
44.05
max
MGB691
28.3 0.25
38.1 0.5
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm 2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
212
28.3
74.9
38200
2013 Jul 31
389
TYPE NUMBER
CP-EC52-1S
Ferroxcube
EC52
MOUNTING PARTS
General data and ordering information
ITEM
REMARKS
Insertable pins
Clamp
MOUNT
FIGURE
3
PIN-EC
horizontal
PIN/H-EC
vertical
PIN/V-EC52
15.8
handbook, halfpage
handbook, halfpage
1.6 2.35
3.15
TYPE NUMBER
general
CLM/U-EC52
BPL4-EC52
15.6
3.0 1.5
1.5
0.3
0.6
2.2
0.5
MGB545
MGB546
Dimensions in mm.
Dimensions in mm.
handbook, halfpage
handbook, halfpage
18.7
8.5
1.6 3.1
2.85
2.9
57.2
6-32 NC 2A
THD 2 PLACES
12.7
min
0.5
MGB548
48.9
Dimensions in mm.
Dimensions in mm.
2013 Jul 31
390
MGB538
Ferroxcube
handbook, halfpage
EC52
76.2
63.5
48.1
12.7
3.7
3.7
5.7
1
MGB543
Dimensions in mm.
2013 Jul 31
391
Ferroxcube
EC70
CORE SETS
Effective core parameters
SYMBOL
handbook, halfpage
PARAMETER
VALUE
UNIT
22.75
0.45
34.5
0.15
(I/A)
0.514
mm1
Ve
effective volume
40 100
mm3
Ie
effective length
144
mm
Ae
effective area
279
mm2
71.7 max
44.5 1.2
16.4 0.4
Amin
minimum area
211
mm2
127
g
16.4
0.4
MGC407
Dimensions in mm.
AL
(nH)
TYPE NUMBER
250 3% (1)
102
1 830
EC70-3C81-E250
315 3% (1)
130
1 370
EC70-3C81-E315
3% (1)
165
1 020
EC70-3C81-E400
256
580
EC70-3C81-A630
1000 10%
406
320
EC70-3C81-A1000
4 000
1620
250 3% (1)
102
1 830
EC70-3C90-E250
315 3% (1)
130
1 370
EC70-3C90-E315
400 3% (1)
165
1 020
EC70-3C90-E400
630 5%
256
580
EC70-3C90-A630
1000 10%
406
320
EC70-3C90-A1000
3900 25%
1580
400
630 5%
3C90
EC70-3C81
EC70-3C90
Note
1. Measured in combination with an equal gapped core half (symmetrical air gap).
Properties of core sets under power conditions
B (mT) at
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
3C81
330
8.2
3C90
330
4.9
5.1
GRADE
2013 Jul 31
392
T = 100 C
Ferroxcube
EC70
COIL FORMERS
General data 8-slots EC70 coil former for insertable pins
PARAMETER
SPECIFICATION
3.81
51.4 0.25
50.8 0.64
17.15
41.45 0.25
6
19.5 0.13
42.45
0.25
17.15
0.15
4.5
56.5
0.25
10.16
30.48
50.8
44.15 0.64
MFW050
56.5 0.25
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
465
41.5
97.3
130000
Note
1. Coil formers with inserted pins are available on request.
2013 Jul 31
393
TYPE NUMBER
CP-EC70-1S
Ferroxcube
EC70
MOUNTING PARTS
General data and ordering information
ITEM
REMARKS
Insertable pins
Clamp
MOUNT
FIGURE
3
PIN-EC
horizontal
PIN/H-EC
vertical
PIN/V-EC70
handbook, halfpage
15.8
handbook, halfpage
1.6 2.35
3.15
TYPE NUMBER
general
CLM/U-EC70
BPL4-EC70
15.6
3.0 1.5
1.5
0.3
0.6
2.2
0.5
MGB545
MGB546
Dimensions in mm.
Dimensions in mm.
handbook, halfpage
handbook, halfpage
22.9
12.7
2.85
2.9
1.6 3.1
78.7
0.5
MGB549
12.7
min
6-32 NC 2A
THD 2 PLACES
65.4
Dimensions in mm.
Dimensions in mm.
2013 Jul 31
394
MGB539
Ferroxcube
handbook, halfpage
EC70
95.3
82.6
64.7
15.9
3.7
3.7
7.5
1
MGB544
Dimensions in mm.
2013 Jul 31
395
Ferroxcube
Soft Ferrites
CBW316
2013 Jul 31
396
Ferroxcube
Soft Ferrites
Ve
(mm3)
171
Ae
(mm 2)
MASS
(g)
7.2
0.45
EFD12/6/3.5 325
11.4
0.9
EFD15/8/5
510
15.0
1.4
EFD20/10/7
1460
31.0
3.5
EFD25/13/9
3300
58.0
EFD30/15/9
4700
69.0
12
X special version
S set
AL value (nH) or gap size (m)
gap type:
A unsymmetrical gap to AL value
E symmetrical gap to AL value
core material
core size
core type
CBW084
C P H S EFD15 2S 8P X
special
version
number of pins
number of sections
associated core type
mounting type: S surface mount
mounting orientation: H horizontal
plastic material type:
P thermoplastic
S thermoset
coil former (bobbin)
CBW085
2013 Jul 31
397
Ferroxcube
EFD10/5/3
CORES
Effective core parameters
VALUE
UNIT
(I/A)
SYMBOL
PARAMETER
3.29
mm1
Ve
effective volume
171
mm3
Ie
effective length
23.7
mm
Ae
effective area
7.2
mm2
Amin
minimum area
6.5
mm2
0.45
handbook, halfpage
5.2
0.1
3.75
0.15
10.5 0.3
7.65 0.25
4.55
0.15
2.7
0.2
0.1
1.45
0.05
MGC338
Dimensions in mm.
3C94
3C96
3F3
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
25 5%
66
610
EFD10/5/3-3C90-A25-S
40 8%
105
310
EFD10/5/3-3C90-A40-S
63 10%
165
170
585 25%
1510
EFD10/5/3-3C90-A63-S
EFD10/5/3-3C90-S
25 5%
66
610
EFD10/5/3-3C94-A25-S
40 8%
105
310
EFD10/5/3-3C94-A40-S
63 10%
165
170
585 25%
1510
EFD10/5/3-3C94-S
525 25%
EFD10/5/3-3C96-S
EFD10/5/3-3C94-A63-S
1360
25 5%
66
610
EFD10/5/3-3F3-A25-S
EFD10/5/3-3F3-A40-S
40 8%
105
310
63 10%
165
170
500 25%
1290
3F35
400 25%
1030
3F4
25 5%
66
570
EFD10/5/3-3F4-A25-S
EFD10/5/3-3F4-A40-S
3F45
2013 Jul 31
EFD10/5/3-3F3-A63-S
EFD10/5/3-3F3-S
EFD10/5/3-3F35-S
40 8%
105
280
63 10%
165
150
280 25%
730
EFD10/5/3-3F4-S
280 25%
730
EFD10/5/3-3F45-S
398
EFD10/5/3-3F4-A63-S
Ferroxcube
EFD10/5/3
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
3C90
320
0.019
3C94
320
0.015
0.09
GRADE
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
3C96
340
0.01
0.07
0.03
0.06
3F35
300
0.015
0.03
3F3
315
0.020
0.035
3F4
250
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C90
320
3C94
320
3C96
320
3F35
300
0.2
3F3
315
3F4
250
0.05
0.08
3F45
250
0.04
0.15
0.065
GRADE
2013 Jul 31
399
Ferroxcube
EFD10/5/3
COIL FORMERS
General data
PARAMETER
SPECIFICATION
liquid crystal polymer (LCP), glass reinforced, flame retardant in accordance with
UL 94V-0; UL file number E54705(M)
Solderability
0.1
1.6 0
1.8
0
7.3 0.15
0
5.7
0.1
0.1
4.8 0
0
7.1 0.15
2.5
0.8
2.8
(6.05 min)
0
5.4
0.1
max
0.3
0.3
11
1.8
12
11.7 max
14.7 max
MGC339
Dimensions in mm.
NUMBER
OF SOLDER
PADS
MINIMUM
WINDING
AREA
(mm 2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
4.2
6.05
14.8
30.24
2013 Jul 31
400
TYPE NUMBER
CPHS-EFD10-1S-8P
Ferroxcube
EFD10/5/3
MOUNTING PARTS
General data
ITEM
REMARKS
FIGURE
Clamp
handbook, halfpage
0
0.3
9.4
12
10.5 0.2
8
2.5
10
0
0.3
4
MBW128
Dimensions in mm.
2013 Jul 31
401
TYPE NUMBER
CLM-EFD10
Ferroxcube
EFD12/6/3.5
CORES
Effective core parameters
SYMBOL
PARAMETER
handbook, halfpage
VALUE
UNIT
(I/A)
2.50
mm1
Ve
effective volume
325
mm3
Ie
effective length
28.5
mm
Ae
effective area
11.4
mm2
Amin
minimum area
10.7
mm2
0.9
4.55
6.2 0.15
0.1
12.5 0.3
9 0.25
5.4
0.15
3.5
0.1
0.2
2
0.1
CBW268
Dimensions in mm.
3C94
3C96
3F3
3F35
3F4
3F45
2013 Jul 31
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
40 5%
80
540
EFD12/6/3.5-3C90-A40-S
63 8%
125
290
EFD12/6/3.5-3C90-A63-S
100 10%
200
160
825 25%
1610
EFD12/6/3.5-3C90-A100-S
EFD12/6/3.5-3C90-S
40 5%
80
540
EFD12/6/3.5-3C94-A40-S
63 8%
125
290
EFD12/6/3.5-3C94-A63-S
100 10%
200
160
825 25%
1610
750 25%
1460
80
540
40 5%
EFD12/6/3.5-3C94-A100-S
EFD12/6/3.5-3C94-S
EFD12/6/3.5-3C96-S
EFD12/6/3.5-3F3-A40-S
63 8%
125
290
EFD12/6/3.5-3F3-A63-S
100 10%
200
160
EFD12/6/3.5-3F3-A100-S
700 25%
1370
EFD12/6/3.5-3F3-S
550 25%
1070
EFD12/6/3.5-3F35-S
40 5%
80
500
EFD12/6/3.5-3F4-A40-S
63 8%
125
260
EFD12/6/3.5-3F4-A63-S
100 10%
200
130
380 25%
730
EFD12/6/3.5-3F4-S
380 25%
730
EFD12/6/3.5-3F45-S
402
EFD12/6/3.5-3F4-A100-S
Ferroxcube
EFD12/6/3.5
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
3C90
320
0.036
3C94
320
0.029
0.2
3C96
340
0.022
0.15
0.06
0.12
3F35
300
0.03
0.045
3F3
315
0.04
0.065
3F4
250
GRADE
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C90
320
3C94
320
3C96
340
3F35
300
0.35
3F3
315
3F4
250
0.095
0.15
3F45
250
0.075
0.28
0.12
GRADE
2013 Jul 31
403
Ferroxcube
EFD12/6/3.5
COIL FORMERS
General data
ITEM
SPECIFICATION
liquid crystal polymer (LCP), glass reinforced, flame retardant in accordance with
UL 94V-0; UL file number E83005(M)
Solderability
0.1
2.2 0
1.8
0
8.65 0.15
0
6.55
0.1
0
8.7 0.15
5.7 0.05
(7.65 min)
3.1
0.8
2.8
0
6.2
0.1
max
0.3
0.3
12.5
2
0.2
1.8
13.4
0
16 0.3
9
13.7 max
MGC341
Dimensions in mm.
NUMBER
OF SOLDER
PADS
MINIMUM
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
6.5
7.65
18.6
74.1
2013 Jul 31
404
TYPE NUMBER
CPHS-EFD12-1S-8P-Z
Ferroxcube
EFD12/6/3.5
MOUNTING PARTS
General data
ITEM
Clamp
REMARKS
FIGURE
14 0.3
12.5 0.2
10.5
9.4
2.5
12 0.3
11.5
CBW496
Dimensions in mm.
2013 Jul 31
405
TYPE NUMBER
CLM-EFD12
Ferroxcube
EFD15/8/5
CORES
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
2.27
mm1
Ve
effective volume
510
mm3
Ie
effective length
34.0
mm
Ae
effective area
15.0
mm2
Amin
minimum area
12.2
mm2
1.4
handbook, halfpage
5.5
7.5 0.25
0.15
15 0.4
11 0.35
5.3
0.15
g
4.65 0.2
0.15
2.4
0.1
CBW366
Dimensions in mm.
3C94
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
63 5%
115
400
EFD15/8/5-3C90-A63-S
100 8%
180
220
EFD15/8/5-3C90-A100-S
160 10%
290
120
950 25%
1700
EFD15/8/5-3C90-A160-S
EFD15/8/5-3C90-S
63 5%
115
400
EFD15/8/5-3C94-A63-S
100 8%
180
220
EFD15/8/5-3C94-A100-S
160 10%
290
120
950 25%
1700
EFD15/8/5-3C94-S
EFD15/8/5-3C94-A160-S
3C95
1140 25%
2070
EFD15/8/5-3C95-S
3C96
850 25%
1520
EFD15/8/5-3C96-S
63 5%
115
400
EFD15/8/5-3F3-A63-S
100 8%
180
220
EFD15/8/5-3F3-A100-S
3F3
160 10%
290
120
780 25%
1400
3F35
630 25%
1130
3F4
63 5%
115
360
100 8%
180
190
EFD15/8/5-3F4-A100-S
160 10%
290
90
EFD15/8/5-3F4-A160-S
3F45
2013 Jul 31
EFD15/8/5-3F3-A160-S
EFD15/8/5-3F3-S
EFD15/8/5-3F35-S
EFD15/8/5-3F4-A63-S
400 25%
720
EFD15/8/5-3F4-S
400 25%
720
EFD15/8/5-3F45-S
406
Ferroxcube
EFD15/8/5
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
3C90
320
0.057
3C94
320
0.045
0.28
GRADE
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
3C95
320
0.28
0.27
3C96
340
0.035
0.22
0.09
0.19
3F35
300
0.05
0.06
3F3
315
0.06
0.1
3F4
250
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C90
320
3C94
320
3C95
320
3C96
340
3F35
300
0.5
3F3
315
3F4
250
0.15
0.24
3F45
250
0.12
0.45
0.2
GRADE
2013 Jul 31
407
Ferroxcube
EFD15/8/5
COIL FORMERS
General data
PARAMETER
Coil former material
SPECIFICATION
phenolformaldehyde (PF), glass reinforced, flame retardant in accordance with
UL 94V-0; UL file number E167521(M)
Pin material
Solderability
0
10.55 0.15
0
6.95
0.1
0.1
5.58
0
3.75
0
10.4 0.15
8.85 min
0.1
0
4
2.63 0
0.1
13.75
3.6
9.7 0.1
O 0.6
3.75 0.1
11.250.1
13.75 0.1
15.2 max
16.7 max
CBW580
0.15
1.3 0
Dimensions in mm.
WINDING
AREA
(mm 2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
14.8
8.85
26.3
222
Note
1. Also available with post-inserted pins.
2013 Jul 31
408
TYPE NUMBER
CSH-EFD15-1S-8P (1)
Ferroxcube
EFD15/8/5
COIL FORMERS
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
0
10.55 0.15
0
6.65 0.1
+0.1
5.5 0
0
7.5 0.15
0.2
0
10.4 0.15
9.15 min
0
3.7 0.1
2.6+0.1
0
0.5
0.4
13.75
3.8 0.3
0.3
1.35 min
1+0.15
0
13.75
18.5 0.2
18.5 0.2
3.75
MFW046
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
16.7
9.15
25.6
251
2013 Jul 31
409
TYPE NUMBER
CPH-EFD15-1S-8PD-Z
Ferroxcube
EFD15/8/5
COIL FORMERS
General data
PARAMETER
SPECIFICATION
Solderability
2.8
10.5
6.85 0.2
10.5 0.2
5.4 +0.2
8.9 min.
17
7.35
max.
0.4
0.8
CBW499
15.1 max.
10
18.2
15.1 max.
21.3
1.6
2.5
Dimensions in mm.
NUMBER
OF SOLDER
PADS
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
10
16.0
8.9
26
240
2013 Jul 31
410
TYPE NUMBER
CPHS-EFD15-1S-10P
Ferroxcube
EFD15/8/5
COIL FORMERS
General data
PARAMETER
Coil former material
SPECIFICATION
phenolformaldehyde (PF), glass reinforced, flame retardant in accordance with
UL 94V-0; UL file number E41429 (M)
Pin material
Solderability
10.55 0.15
10.4 0.15
6.65 0.1
5.55
+0.1
9.25 min.
15
8
max.
0.3
3.75
CBW498
16.7 max.
1.5
2.8
16
18.7 max.
11.25
2
2
3.75
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
16.7
9.25
24.1
251
2013 Jul 31
411
TYPE NUMBER
CSHS-EFD15-1S-8P-Z
Ferroxcube
EFD15/8/5
MOUNTING PARTS
General data
ITEM
REMARKS
FIGURE
TYPE NUMBER
Clamp
CLM-EFD15
Clip
CLI-EFD15
16.5 0.3
13.5
15 0.2
12
12.5
14.3 0.2
7 + 0.5
CBW497
Dimensions in mm.
handbook, halfpage
4.5
19 13.3
MGC354
2.6
Dimensions in mm.
2013 Jul 31
412
Ferroxcube
EFD20/10/7
CORES
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
1.52
mm1
(I/A)
Ve
effective volume
1460
mm3
Ie
effective length
47.0
mm
handbook, halfpage
10
0.15
7.7
0.25
Ae
effective area
31.0
mm2
Amin
minimum area
29
mm2
20 0.55
3.5
15.4 0.5
8.9
0.2
6.65 0.17
0.15
3.6
0.15
MGC345
Dimensions in mm.
AL
(nH)
63 3%(1)
TYPE NUMBER
76
960
EFD20/10/7-3C90-E63
100 3%
121
510
EFD20/10/7-3C90-A100
160 5%
193
280
EFD20/10/7-3C90-A160
250 8%
302
160
EFD20/10/7-3C90-A250
315 10%
380
120
EFD20/10/7-3C90-A315
1300 25%
1570
76
960
EFD20/10/7-3C94-E63
100 3%
121
510
EFD20/10/7-3C94-A100
160 5%
193
280
EFD20/10/7-3C94-A160
250 8%
302
160
EFD20/10/7-3C94-A250
315 10%
380
120
1300 25%
1570
EFD20/10/7-3C94
3C95
1540 25%
1865
EFD20/10/7-3C95
3C96
1200 25%
1450
EFD20/10/7-3C96
76
960
EFD20/10/7-3F3-E63
100 3%
121
510
EFD20/10/7-3F3-A100
160 5%
193
280
EFD20/10/7-3F3-A160
250 8%
302
160
EFD20/10/7-3F3-A250
315 10%
380
120
1200 25%
1450
3C90
3C94
3F3
2013 Jul 31
63 3%(1)
63 3%(1)
413
EFD20/10/7-3C90
EFD20/10/7-3C94-A315
EFD20/10/7-3F3-A315
EFD20/10/7-3F3
Ferroxcube
GRADE
3F35
3F4
3F45
EFD20/10/7
AL
(nH)
920 25%
TYPE NUMBER
1110
76
900
EFD20/10/7-3F4-E63
63 3%(1)
EFD20/10/7-3F35
100 3%
121
450
EFD20/10/7-3F4-A100
160 5%
193
230
EFD20/10/7-3F4-A160
250 8%
302
120
EFD20/10/7-3F4-A250
315 10%
380
80
650 25%
780
EFD20/10/7-3F4
650 25%
780
EFD20/10/7-3F45
EFD20/10/7-3F4-A315
Note
1. Measured in combination with an equal gapped core half, clamping force for AL measurements, 20 10 N.
H = 250 A/m;f =
25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
3C90
330
0.16
0.17
3C94
330
0.13
0.8
3C95
330
0.86
0.82
3C96
330
0.1
0.6
0.26
3F35
300
0.13
3F3
315
0.17
0.28
3F4
300
GRADE
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C90
330
3C94
330
3C95
330
3C96
330
0.5
GRADE
3F35
300
0.2
1.5
3F3
315
3F4
300
0.43
0.7
3F45
300
0.34
1.25
0.55
2013 Jul 31
414
Ferroxcube
EFD20/10/7
COIL FORMERS
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
10 max
14.8 max
10.6 0
0.15
9.23 +0.15
0
14.8
0
0.2
13.2 min
9.5 max
5.2 0.3
17.5
14.1 0.1
1.6
0.6
5 0.1
15 0.1
17.5 0.1
20.2 max.
21.2 max.
1.3 +0.15
0
CBW087
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
26.4
13.2
36.5
818
Note
1. Also available with post-inserted pins.
2013 Jul 31
415
TYPE NUMBER
CSH-EFD20-1S-8P(1)
Ferroxcube
EFD20/10/7
COIL FORMERS
General data
PARAMETER
SPECIFICATION
liquid crystal polymer (LCP), glass reinforced, flame retardant in accordance with
UL94 V-0; UL file number E54705 (M)
Pin material
Solderability
3.75
0
14.8 0.2
14.8 0
0.2
0
10.3 0.15
+0.1
9.2 0
0
9.50.2
13.5 min.
5 0
3.9 +0.1
0.1
0
0.4
17.5
3.8 0.3
1.35 min.
0.3
7.5 0.1
0
0.70.1
0.5
17.5
19.5
23.5 0.2
15 0.1
+0.15
1 0
21.5 0.2
CBW269
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
27.7
13.5
34.1
859
2013 Jul 31
416
TYPE NUMBER
CPH-EFD20-1S-10PD-Z
Ferroxcube
EFD20/10/7
COIL FORMERS
General data
PARAMETER
SPECIFICATION
liquid crystal polymer (LCP), glass reinforced, flame retardant in accordance with
UL94 V-0; UL file number E83005 (M)
Pin material
Solderability
0
0.2
0
10.3
0.15
+0.15
9.2 0
14.8
0
14.8 0.2
2.8
(13.5 min.)
0
+0.1
3.9 0 5 0.1
9.5
max.
0.3
0.3
20
1.8
7.5 0.05
21
15 0.05
23.7 max.
21.7 max.
3.75
CBW270
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
27.7
13.5
34.1
859
2013 Jul 31
417
TYPE NUMBER
CPHS-EFD20-1S-10P
Ferroxcube
EFD20/10/7
COIL FORMERS
General data
PARAMETER
SPECIFICATION
Solderability
2
14.8 0.2
10.4 0.2
14.8 0.2
9.2 +0.2
13.3 min.
2.8
10.2
max.
0.3
20
1.8
7.5
21
23.7 max.
15
21.7 max.
CBW500
3.75
Dimensions in mm.
NUMBER
OF SOLDER
PADS
WINDING
AREA
(mm 2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
10
27.2
13.3
34.9
843
2013 Jul 31
418
TYPE NUMBER
CSHS-EFD20-1S-10P-Z
Ferroxcube
EFD20/10/7
MOUNTING PARTS
General data
ITEM
REMARKS
FIGURE
TYPE NUMBER
Clamp
CLM-EFD20
Clip
CLI-EFD20
21.5 0
0.3
18.5
20 0.2
17
17.5
4.7
4
0.05
19.3 0
0.2
Dimensions in mm.
handbook, halfpage
24 18.3
MGC349
Dimensions in mm.
2013 Jul 31
419
CBW169
Ferroxcube
EFD25/13/9
CORES
Effective core parameters
VALUE
UNIT
(I/A)
SYMBOL
PARAMETER
1.00
mm1
Ve
effective volume
3300
mm3
Ie
effective length
57.0
mm
Ae
effective area
58.0
mm2
Amin
minimum area
55.0
mm2
handbook, halfpage
9.3
0.25
12.5
0.15
25 0.65
18.7 0.6
11.4
0.2
9.1 0.6
0.2
5.2
0.15
MGC342
Dimensions in mm.
3C94
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
160 3%
125
570
EFD25/13/9-3C90-A160
250 3%
196
320
EFD25/13/9-3C90-A250
315 5%
246
240
EFD25/13/9-3C90-A315
400 8%
313
180
EFD25/13/9-3C90-A400
630 10%
493
100
2200 25%
1720
160 3%
125
570
250 3%
196
320
EFD25/13/9-3C94-A250
315 5%
246
240
EFD25/13/9-3C94-A315
400 8%
313
180
EFD25/13/9-3C94-A400
630 10%
493
100
2200 25%
1720
EFD25/13/9-3C90-A630
EFD25/13/9-3C90
EFD25/13/9-3C94-A160
EFD25/13/9-3C94-A630
EFD25/13/9-3C94
3C95
2660 25%
2085
EFD25/13/9-3C95
3C96
2000 25%
1560
EFD25/13/9-3C96
2013 Jul 31
420
Ferroxcube
EFD25/13/9
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
160 3%
125
570
EFD25/13/9-3F3-A160
250 3%
196
320
EFD25/13/9-3F3-A250
315 5%
246
240
EFD25/13/9-3F3-A315
400 8%
313
180
EFD25/13/9-3F3-A400
630 10%
493
100
2000 25%
1560
3F35
1500 25%
1170
3F4
160 3%
125
500
250 3%
196
270
EFD25/13/9-3F4-A250
315 5%
246
290
EFD25/13/9-3F4-A315
400 8%
313
130
EFD25/13/9-3F4-A400
630 10%
493
60
EFD25/13/9-3F4-A630
3F3
3F45
EFD25/13/9-3F3-A630
EFD25/13/9-3F3
EFD25/13/9-3F35
EFD25/13/9-3F4-A160
1000 25%
780
EFD25/13/9-3F4
1000 25%
780
EFD25/13/9-3F45
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C90
330
0.35
0.38
3C94
330
0.30
1.8
3C95
330
1.95
1.85
3C96
330
0.22
1.4
0.6
3F35
300
0.28
3F3
315
0.38
0.66
3F4
300
GRADE
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C90
330
3C94
330
3C95
330
3C96
330
1.2
3F35
300
0.42
3.4
3F3
315
3F4
300
1.0
1.6
3F45
300
0.75
2.8
1.25
GRADE
2013 Jul 31
421
Ferroxcube
EFD25/13/9
COIL FORMERS
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
18 0.2
13.1 0.2
18 0.2
11.78 +0.1
(16.4 min.)
12.55 12
max. 0.2
3.6
10
CBW501
0.8
20
22.5
25.2 max.
26.2 max.
Dimensions in mm.
1.
NUMBER OF
SECTIONS
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
40.2
16.4
46.4
2330
2013 Jul 31
422
TYPE NUMBER
CSH-EFD25-1S-10P (1)
Ferroxcube
EFD25/13/9
COIL FORMERS
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
18 0
0.15
13 + 0.1
0
+ 0.1
11.7
0
18 0
0.15
16.45 min
12.5
0.2
6.8 + 0.1
0
5.5 + 0.1
0
0.4
0.05
28
2.75
1.2
(10x)
3.75 0.1
1.5 (10x)
0.9 (4x)
26
11.25 0.1
30.1 0.2
18.75 0.1
31.5 0.2
3.75
28 0.2
MFP032
25 0.2
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
39.0
16.45
46.4
2260
2013 Jul 31
423
TYPE NUMBER
CSHS-EFD25-1S-12P
Ferroxcube
24
EFD25/13/9
6
0
0.3
0
0.3
8 0.1
23 0.2
0.25 0.05
26
0.2
26 0.2
MFP033
Dimensions in mm.
handbook, halfpage
29 23.3
MGC344
4.5
Dimensions in mm.
MOUNTING PARTS
General data
ITEM
REMARKS
FIGURE
TYPE NUMBER
Clip
CLI-EFD25
Clamp
CLM-EFD25
2013 Jul 31
424
Ferroxcube
EFD30/15/9
CORES
Effective core parameters
VALUE
UNIT
(I/A)
SYMBOL
PARAMETER
0.98
mm1
Ve
effective volume
4700
mm3
Ie
effective length
68.0
mm
Ae
effective area
69.0
mm2
Amin
minimum area
66.0
mm2
12
handbook, halfpage
15
0.15
11.2
0.3
30 0.8
22.4 0.75
14.6
0.25
9.1 0.75
0.2
4.9
0.15
MGC183
Dimensions in mm.
3C94
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
160 3%
125
690
EFD30/15/9-3C90-A160
250 3%
196
390
EFD30/15/9-3C90-A250
315 5%
247
290
EFD30/15/9-3C90-A315
400 8%
314
210
EFD30/15/9-3C90-A400
630 10%
494
120
2100 25%
1720
160 3%
125
690
250 3%
196
390
EFD30/15/9-3C94-A250
315 5%
247
290
EFD30/15/9-3C94-A315
400 8%
314
210
EFD30/15/9-3C94-A400
630 10%
494
120
EFD30/15/9-3C94-A630
EFD30/15/9-3C90-A630
EFD30/15/9-3C90
EFD30/15/9-3C94-A160
2100 25%
1720
3C95
2520 25%
1980
EFD30/15/9-3C95
3C96
1900 25%
1560
EFD30/15/9-3C96
2013 Jul 31
425
EFD30/15/9-3C94
Ferroxcube
GRADE
3F3
EFD30/15/9
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
160 3%
125
690
EFD30/15/9-3F3-A160
250 3%
196
390
EFD30/15/9-3F3-A250
315 5%
247
290
EFD30/15/9-3F3-A315
400 8%
314
210
EFD30/15/9-3F3-A400
630 10%
494
120
1900 25%
1560
3F35
1450 25%
1170
3F4
160 3%
125
620
250 3%
196
320
EFD30/15/9-3F4-A250
315 5%
247
230
EFD30/15/9-3F4-A315
400 8%
314
160
EFD30/15/9-3F4-A400
630 10%
494
65
EFD30/15/9-3F4-A630
3F45
EFD30/15/9-3F3-A630
EFD30/15/9-3F3
EFD30/15/9-3F35
EFD30/15/9-3F4-A160
1000 25%
780
EFD30/15/9-3F4
1000 25%
780
EFD30/15/9-3F45
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C90
330
0.50
0.54
3C94
330
0.43
2.6
3C95
330
2.77
2.63
3C96
340
0.32
2.0
0.82
3F35
300
0.4
3F3
315
0.54
0.91
3F4
300
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C90
330
3C94
330
3C95
330
3C96
340
1.7
GRADE
T = 100 C
3F35
300
0.6
4.5
3F3
315
3F4
300
1.4
2.2
3F45
300
1.1
4.0
1.8
2013 Jul 31
426
Ferroxcube
EFD30/15/9
COIL FORMERS
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
21.55 0.2
16.4 0.15
14.98
+0.1
12.55 12
max. 0.2
(20.1 min.)
5.23 +0.1 6.6 0.15
1.3
0.15
3.6
0.8
27.5
15
31.2 max.
25
29.2 max.
CBW502
Dimensions in mm.
Winding data and area product for EFD30/15/9 coil former with 12-pins
NUMBER OF
SECTIONS
WINDING
AREA
(mm 2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
52.3
20.1
52.9
3610
Note
1. Also available with post-inserted pins.
2013 Jul 31
427
TYPE NUMBER
CSH-EFD30-1S-12P (1)
Ferroxcube
EFD30/15/9
MOUNTING PARTS
General data
ITEM
REMARKS
FIGURE
Clip
handbook, halfpage
34 28.3
MGC185
5.5
Dimensions in mm.
2013 Jul 31
428
TYPE NUMBER
CLI-EFD30
Ferroxcube
Soft Ferrites
2013 Jul 31
429
Ferroxcube
Soft Ferrites
CBW617
2013 Jul 31
430
Ferroxcube
Soft Ferrites
Ve
(mm3)
Ae
(mm 2)
EP 13 3F3 A 250 X
MASS
(g)
EP5
28.7
3.0
0.5
EP7
165
10.7
1.4
EP10
215
11.3
2.8
EP13
472
19.5
4.7
EP17
999
33.7
12
EP20
3230
78.7
27
special version
AL value (nH)
gap type:
A asymmetrical gap to AL value
E symmetrical gap to AL value
core material
core size
/LP for low profile cores
CBW088
core type
C P H S EP7 1S 6P X
special version
number and type of pins:
D dual termination
F flat
L long
number of sections
associated core type
mounting type: S surface mount
mounting orientation: H horizontal
plastic material type:
P thermoplastic
S thermoset
coil former (bobbin)
CBW089
2013 Jul 31
431
Ferroxcube
EP5
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
3.20
mm1
Ve
effective volume
28.7
mm3
Ie
effective length
9.70
mm
Ae
effective area
3.00
mm2
Amin
minimum area
2.27
mm2
0.5
1.7 0.1
3.8 0.1
0.9
0.1
4.4 0.15
4.0 0.2
5.6 0.1
6 0.15
MFP014
Dimensions in mm.
AL (nH)
16 3 %
TYPE NUMBER
41
320
25 3 %
64
170
EP5-3C94-A25
40 5 %
102
90
EP5-3C94-A40
EP5-3C94-A63
EP5-3C94-A16
63 8 %
160
50
400 25 %
1020
EP5-3C94
3C96
380 25 %
970
EP5-3C96
3F35
16 3 %
41
320
EP5-3F35-A16
25 3 %
64
170
EP5-3F35-A25
40 5 %
102
90
EP5-3F35-A40
63 8 %
160
50
EP5-3F35-A63
320 25 %
815
2013 Jul 31
432
EP5-3F35
Ferroxcube
EP5
AL
(nH)
500 25 %
AIR GAP
(m)
e
1280
TYPE NUMBER
EP5-3B46
3E6
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
16 3 %
41
320
EP5-3E55-A16
25 3 %
64
170
EP5-3E55-A25
40 5 %
102
90
EP5-3E55-A40
63 8 %
160
50
EP5-3E55-A63
2000 + 40 / 30 %
5100
EP5-3E55
2200 + 40 / 30 %
5600
EP5-3E6
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
3C94
320
0.002
3C96
340
3F35
300
GRADE
2013 Jul 31
f = 100 kHz;
= 200 mT;
B
T = 100 C
433
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
0.014
0.011
0.009
0.003
0.025
Ferroxcube
EP5
COIL FORMERS
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
0
3.7 0.1
2.7 min.
4.1 0.1
1.9 0.1
0.5
4.15
0.2
0.6
1.85
0.25
1.1
5.6
7.8 0.2
0.5
1.5
MFP015
Dimensions in mm.
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
1.89
2.7
10.5
5.67
2013 Jul 31
434
TYPE NUMBER
CPHS-EP5-1S-6P
Ferroxcube
EP5
MOUNTING PARTS
General data
ITEM
REMARKS
Mounting clip
6.15
3.25
4.4
5
6.45
6.65
MFP016
Dimensions in mm.
2013 Jul 31
435
CLI-EP5/6
Ferroxcube
EP7
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
1.45
mm1
Ve
effective volume
165
mm3
Ie
effective length
15.5
mm
Ae
effective area
10.7
mm2
Amin
minimum area
8.55
mm2
1.4
0
3.4 0.2
handbook, halfpage
0
6.5 0.3
1.7
0.1
;;;
;;;
;;;
7.2
0
7.5 0.2
MGC333
0.4
0
0.4
0
0
9.4 0.4
Dimensions in mm.
AL
(nH)
1500 25%
1730
AIR GAP
(m)
0
TYPE NUMBER
EP7-3B46
AL
(nH)
25 3%
29
880
EP7-3C81-E25
40 3%
46
480
EP7-3C81-A40
63 3%
73
270
EP7-3C81-A63
100 3%
115
150
EP7-3C81-A100
EP7-3C81-A160
184
90
1 300 25%
160 5%
1500
3C91
1 300 25%
1500
3C94
25 3%
29
880
EP7-3C81
EP7-3C91
EP7-3C94-E25
40 3%
46
480
EP7-3C94-A40
63 3%
73
270
EP7-3C94-A63
100 3%
115
150
EP7-3C94-A100
160 5%
184
90
EP7-3C94-A160
1380
1 200 25%
2013 Jul 31
TYPE NUMBER
436
EP7-3C94
Ferroxcube
GRADE
3C96
3F3
3F35
EP7
AL
(nH)
1 120 25%
1290
29
880
25 3%
TYPE NUMBER
EP7-3C96
EP7-3F3-E25
40 3%
46
480
EP7-3F3-A40
63 3%
73
270
EP7-3F3-A63
100 3%
115
150
EP7-3F3-A100
160 5%
184
90
EP7-3F3-A160
1 000 25%
1150
EP7-3F3
850 25%
980
EP7-3F35
AL
(nH)
TYPE NUMBER
3E27
3400 25%
3920
EP7-3E27
3E5
5200 +40/30%
5990
EP7-3E5
3E55
5200 +40/30%
5990
EP7-3E55
3E6
5800 +40/30%
6680
EP7-3E6
2013 Jul 31
437
Ferroxcube
EP7
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C81
320
0.04
3C91
320
3C94
320
0.014
0.08
3C96
340
0.011
0.06
0.025
3F35
320
0.015
3F3
315
0.02
0.035
GRADE
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
0.11(1)
0.06(1)
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C81
320
3C91
320
3C94
320
3C96
340
0.055
3F35
320
0.02
0.15
3F3
315
GRADE
Note
1. Measured at 60 C.
2013 Jul 31
438
Ferroxcube
EP7
COIL FORMERS
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
4.85
10.7 max.
0.6
7 0.1
0.5
1 0.15
0.6
3.5
0.05
1.9
4.4
0.1
5.08
2.1
4.45
1.25
CBW507
0.5
8.5 max.
2.54
Dimensions in mm.
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
2 1.75
2 1.45
17.9
2 x 18.7
2013 Jul 31
439
TYPE NUMBER
CSH-EP7-2S-4P-TA
Ferroxcube
EP7
SPECIFICATION
Pin material
Solderability
0
0.1
4.4 0
0.1
7
1 +0.15
0
4.85
3.5 +0.05
0
0.6
0.6
5.08
1.9
2
1
2.54
8.5 max.
0.45
CBW260
10.7 max.
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm 2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
4.3
3.4
17.7
46.0
CSH-EP7-1S-6P-BZ
4.3
3.4
17.7
46.0
CSH-EP7-1S-4P-BZ
2013 Jul 31
440
TYPE NUMBER
Ferroxcube
EP7
SPECIFICATION
Solderability
7 0.1
4.5
0.1
4.9
0.1
3.5
+0.1
3.8 min.
1.8
2.8
7.3
max.
0.3
0.8
1.8
7.2
9.85 max.
9.2 max.
13.15 0.3
3
CBW508
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
4.7
3.9
17.9
50.3
CSHS-EP7-1S-6P-Z
4.7
3.9
17.9
50.3
CSHS-EP7-1S-5P-Z
2013 Jul 31
441
TYPE NUMBER
Ferroxcube
EP7
MOUNTING PARTS
General data
ITEM
REMARKS
Mounting clip
CLI/P-EP7
Mounting clip
CLI-EP7
9.6 +0.2
0
8.4
8.3
6.6 +0.3
0
handbook, halfpage
9.4 +0.2
0
4.75
7
1.3
4.3
7.8
handbook, halfpage
0
6.9 0.3
1.5
3.8
0.4
0.25
0.25
9.6 +0.4
0
3.75
4
CBW282
5.6
CBW261
Dimensions in mm.
Dimensions in mm.
2013 Jul 31
442
Ferroxcube
EP10
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
(I/A)
1.70
mm1
Ve
effective volume
215
mm3
Ie
effective length
19.3
mm
Ae
effective area
11.3
mm2
Amin
minimum area
8.55
mm2
2.8
3.3 0.15
handbook, halfpage
UNIT
7.6
0.2 1.8
0.13
;;;
;;;
;;;
9.4 0.2
10.2
0.2
7.4
0.2
MBG177
11.5 0.3
Dimensions in mm.
AL
(nH)
1400 25%
AIR GAP
(m)
e
1890
TYPE NUMBER
EP10-3B46
3C91
3C94
2013 Jul 31
AL
(nH)
TYPE NUMBER
25 3%
34
1010
EP10-3C81-E25
40 3%
54
530
EP10-3C81-A40
EP10-3C81-A63
63 3%
86
290
100 3%
136
160
EP10-3C81-A100
160 5%
217
90
EP10-3C81-A160
1200 25%
1630
1200 25%
1630
25 3%
34
1010
EP10-3C94-E25
40 3%
54
530
EP10-3C94-A40
63 3%
86
290
EP10-3C94-A63
100 3%
136
160
EP10-3C94-A100
160 5%
217
90
EP10-3C94-A160
1140 25%
1550
443
EP10-3C81
EP10-3C91
EP10-3C94
Ferroxcube
AL
(nH)
GRADE
3C96
3F3
3F35
EP10
1000 25%
1350
34
1010
25 3%
TYPE NUMBER
EP10-3C96
EP10-3F3-E25
40 3%
54
530
EP10-3F3-A40
63 3%
86
290
EP10-3F3-A63
100 3%
136
160
EP10-3F3-A100
160 5%
217
90
EP10-3F3-A160
1000 25%
1360
EP10-3F3
800 25%
1090
EP10-3F35
GRADE
AIR GAP
(m)
TYPE NUMBER
3E27
3400 25%
4630
EP10-3E27
3E5
4800 +40/30%
6530
EP10-3E5
3E55
4800 +40/30%
6530
EP10-3E55
3E6
5400 +40/30%
7340
EP10-3E6
3C81
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
315
0.043
0.014 (1)
0.08(1)
3C91
315
3C94
320
0.019
0.1
3C96
340
0.014
0.08
0.035
3F3
315
0.025
0.045
3F35
300
0.02
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C81
315
3C91
315
3C94
320
GRADE
2013 Jul 31
444
Ferroxcube
EP10
B (mT) at
GRADE
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C96
340
0.07
3F35
300
0.025
0.2
3F3
315
Note
1. Measured at 60 C.
2013 Jul 31
445
Ferroxcube
EP10
COIL FORMER
General data CSH-EP10-1S-8P
PARAMETER
SPECIFICATION
Pin material
Solderability
12.4 max.
0
9
0.1
0
4.8
0.1
7.1
0
0.1
1
5.6 min.
+ 0.1
3.6
0
0.65
+ 0.1
0
0.65
2
2.5
1.8
5
2.54
0.45
CBW417
7.62
11.2 max.
5.08
7.62
Dimensions in mm.
WINDING
AREA
(mm 2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
11.4
5.6
21.5
129
2013 Jul 31
446
TYPE NUMBER
CSH-EP10-1S-8P
Ferroxcube
EP10
SPECIFICATION
Pin material
Solderability
7 0.1
11.1 max.
(5.4 min.)
0.7
8.9 0.1
3.6
+0.05
0.45
0.7
1 0.15
4.9
0.1
9.9
max.
2.55
0.9
3.4
2.5
0.6
7.5
11.1 max.
2.5
CBW503
7.5
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
2 4.8
2 2.6
21.6
2 x 54.2
2013 Jul 31
447
TYPE NUMBER
CSH-EP10-2S-8P
Ferroxcube
EP10
SPECIFICATION
Pin material
Solderability
9 0.1
4.8 0.1
7.1 0.1
3.55
+0.1
5.5 min.
2.8
9.2
max.
0.7
0.35
8.5
9.6
1.8
13.3 max.
2.5
1.8
2.5
7.5
CBW504
11.6 max.
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm 2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
11.3
5.5
21.5
128
2013 Jul 31
448
TYPE NUMBER
CSHS-EP10-1S-8P-T
1.6
Ferroxcube
EP10
MOUNTING PARTS
General data
ITEM
REMARKS
FIGURE
TYPE NUMBER
Clasp
CLA-EP10
Spring
SPR-EP10
Clip
CLI-EP10
16
handbook, halfpage
2.5
handbook, halfpage
4.8
6.3
12.7
0.4
TYP.
2.5
9.25
9.7
0.3
TYP.
1
12.0
6.4
CBW420
CBW419
Dimensions in mm.
Dimensions in mm.
11.8 + 0.2
0
5.8
handbook, halfpage
12
9.7 0
0.3
CBW421
0.25
Dimensions in mm.
2013 Jul 31
449
Ferroxcube
EP13
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
(I/A)
1.24
mm1
Ve
effective volume
472
mm3
Ie
effective length
24.2
mm
Ae
effective area
19.5
mm2
Amin
minimum area
14.9
mm2
4.7
0
4.5 0.3
handbook, halfpage
UNIT
0
9 0.4
2.4
0.1
;;;
;;;
;;;
9.7
0
13 0.3
0.6
0
MGC186
0.4
0
0
12.8 0.6
Dimensions in mm.
AL
(nH)
21 50 25%
AIR GAP
(m)
e
2090
TYPE NUMBER
EP13-3B46
AL
(nH)
40 3%
40
1000
EP13-3C81-E40
63 3%
62
540
EP13-3C81-A63
100 3%
99
300
EP13-3C81-A100
160 3%
158
170
EP13-3C81-A160
250 5%
247
100
EP13-3C81-A250
1 700 25%
1680
3C91
1 700 25%
1680
3C94
40 3%
40
1000
EP13-3C81
EP13-3C91
EP13-3C94-E40
63 3%
62
540
EP13-3C94-A63
100 3%
99
300
EP13-3C94-A100
160 3%
158
170
EP13-3C94-A160
250 5%
247
100
EP13-3C94-A250
1630
1650 25%
2013 Jul 31
TYPE NUMBER
450
EP13-3C94
Ferroxcube
GRADE
3C96
3F3
AL
(nH)
1500 25%
40 3%
e
1480
40
1000
TYPE NUMBER
EP13-3C96
EP13-3F3-E40
63 3%
62
540
EP13-3F3-A63
100 3%
99
300
EP13-3F3-A100
160 3%
158
170
EP13-3F3-A160
EP13-3F3-A250
250 5%
3F35
EP13
247
100
1325 25%
1310
EP13-3F3
1100 25%
1090
EP13-3F35
3E6
2013 Jul 31
AL
(nH)
4600 25%
7000 +40/-30%
AIR GAP
(m)
TYPE NUMBER
4540
EP13-3E27
6900
EP13-3E5
100 3%
99
310
EP13-3E55-A100
160 3%
158
180
EP13-3E55-A160
250 5%
247
110
EP13-3E55-A250
315 5%
311
80
EP13-3E55-A315
400 8%
395
65
EP13-3E55-A400
630 15%
622
40
EP13-3E55-A630
7000 +40/-30%
6900
EP13-3E55
8500 +40/-30%
8400
EP13-3E6
451
Ferroxcube
EP13
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C81
315
0.1
3C91
315
3C94
320
0.04
0.22
3C96
340
0.03
0.17
0.075
3F35
300
0.04
3F3
315
0.05
0.1
GRADE
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
0.03(1)
0.17(1)
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C81
315
3C91
315
3C94
320
3C96
340
0.15
3F35
300
0.06
0.45
3F3
315
GRADE
Note
1. Measured at 60 C.
2013 Jul 31
452
Ferroxcube
EP13
COIL FORMERS
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
13.6 max.
2.54
13.6 max.
9.5 0.1
8.9 0.1
4.6 0.1
0.6
7.6 min.
0.6
0
5.8
0.1
2.5
2.7
1
0.8
3.8
0.6
CBW618
10.16
5.08
1 +0.15
0
10.16
Dimensions in mm.
Winding data and area product for 10-pins EP13 coil former
NUMBER OF
SECTIONS
WINDING
AREA
(mm 2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
13.6
7.6
23.8
265
CSH-EP13-1S-10P
2 6.1
2 3.4
23.8
2 x 119
CSH-EP13-2S-10P
2013 Jul 31
453
Ferroxcube
EP13
SPECIFICATION
Pin material
Solderability
9.5 0.1
8.9 0.1
5.8 0.1
4.6
+0.1
7.5 min.
2.8
9.95
max.
0.35
0.7
10.5
1.8
11.85
15.1 max.
1.8
2.5
1.6
10
CBW505
13.1 max.
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
13.5
7.5
23.8
263
2013 Jul 31
454
TYPE NUMBER
CSHS-EP13-1S-10P-T
Ferroxcube
EP13
MOUNTING PARTS
General data
ITEM
REMARKS
FIGURE
TYPE NUMBER
Clasp
CLA-EP13
Spring
SPR-EP13
Clip
CLI-EP13
16.8
handbook, halfpage
handbook, halfpage
2.6
7.5
14
0.4 TYP
12.7
11.7
0.4
TYP
CBW619
12.9
7.5
MGB590
Dimensions in mm.
Dimensions in mm.
12.8 +0.2
0
6.8
handbook, halfpage
14.5
12.2 0
0.3
CBW090
0.25
Dimensions in mm.
2013 Jul 31
455
Ferroxcube
EP17
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.870
mm1
Ve
effective volume
999
mm3
Ie
effective length
29.5
mm
Ae
effective area
33.7
mm2
Amin
minimum area
25.5
mm2
mass of set
12
5.7 0.18
handbook, halfpage
11
0.25 3.3
0.2
;;;
;;;
;;;
12 0.4
16.8
0.2
11.4
0.3
MBG176
18 0.4
Dimensions in mm.
AL
(nH)
TYPE NUMBER
63 3%
44
1020
EP17-3C81-E63
100 3%
70
560
EP17-3C81-A100
160 3%
111
310
EP17-3C81-A160
250 3%
174
180
EP17-3C81-A250
315 5%
219
135
EP17-3C81-A315
2670 25%
1860
3C91
2670 25%
1860
3C94
63 3%
44
1020
EP17-3C94-E63
100 3%
70
560
EP17-3C94-A100
160 3%
111
310
EP17-3C94-A160
250 3%
174
180
EP17-3C94-A250
315 5%
219
135
EP17-3C94-A315
2500 25%
1740
EP17-3C94
2200 25%
1530
EP17-3C96
3C81
3C96
2013 Jul 31
456
EP17-3C81
EP17-3C91
Ferroxcube
AL
(nH)
GRADE
3F3
EP17
TYPE NUMBER
63 3%
44
1020
EP17-3F3-E63
100 3%
70
560
EP17-3F3-A100
160 3%
111
310
EP17-3F3-A160
250 3%
174
180
EP17-3F3-A250
315 5%
219
135
EP17-3F3-A315
1530
2200 25%
EP17-3F3
AIR GAP
(m)
7100 25%
4950
GRADE
3E27
TYPE NUMBER
EP17-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C81
315
0.23
3C91
315
3C94
320
0.08
0.45
3C96
340
0.06
0.36
0.15
3F3
315
0.15
0.2
GRADE
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
0.06(1)
0.36(1)
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C81
315
3C91
315
3C94
320
3C96
340
0.3
3F3
315
GRADE
Note
1. Measured at 60 C.
2013 Jul 31
457
Ferroxcube
EP17
COIL FORMER
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
11.4 max.
+0.15
1 0
10.9 0.1
6 +0.15
0
0.65
9.4 min.
0.65
0
7.2 0.2
3.5
3
1.5
15
4.5
4.7
0.5
CBW506
0.6
19.2 max.
19.2 max.
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm 2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
18.0
9.45
28.9
607
CSH-EP17-1S-8P
2 8.3
2 4.6
28.9
2 x 280
CSH-EP17-2S-8P
2013 Jul 31
458
Ferroxcube
EP17
MOUNTING PARTS
General data
ITEM
REMARKS
FIGURE
TYPE NUMBER
Clasp
CLA-EP17
Spring
SPR-EP17
19.6
handbook, halfpage
handbook, halfpage
4.4
19.2
0.4 TYP
5
15.6
16.8
1
18.4
CBW621
CBW620
Dimensions in mm.
Dimensions in mm.
2013 Jul 31
459
Ferroxcube
EP20
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.520
mm1
Ve
effective volume
3230
mm3
Ie
effective length
41.1
mm
Ae
effective area
78.7
mm2
Amin
minimum area
60.8
mm2
mass of set
27
8.8 0.25
handbook, halfpage
15
0.35 4.5
0.2
;;;
;;;
;;;
16.5 0.4
21.4
0.2
14.4
0.3
MBG178
24 0.5
Dimensions in mm.
AL
(nH)
TYPE NUMBER
160 3%
67
790
EP20-3C81-E160
250 3%
104
460
EP20-3C81-A250
315 3%
131
350
EP20-3C81-A315
400 3%
166
260
EP20-3C81-A400
630 5%
262
150
EP20-3C81-A630
4900 25%
2040
EP20-3C81
3C91
4900 25%
2040
EP20-3C91
3C94
160 3%
67
790
EP20-3C94-E160
250 3%
104
460
EP20-3C94-A250
315 3%
131
350
EP20-3C94-A315
400 3%
166
260
EP20-3C94-A400
630 5%
262
150
EP20-3C94-A630
4435 25%
1840
EP20-3C94
3850 25%
1600
EP20-3C96
3C81
3C96
2013 Jul 31
460
Ferroxcube
AL
(nH)
GRADE
3F3
EP20
TYPE NUMBER
160 3%
67
790
EP20-3F3-E160
250 3%
104
460
EP20-3F3-A250
315 3%
131
350
EP20-3F3-A315
400 3%
166
260
EP20-3F3-A400
630 5%
262
150
EP20-3F3-A630
1480
3550 25%
EP20-3F3
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C81
315
0.75
3C91
315
3C94
320
0.25
1.6
3C96
340
0.2
1.3
0.5
3F3
315
0.36
0.62
GRADE
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
0.2(1)
1.3(1)
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C81
315
3C91
315
3C94
320
3C96
340
1.0
3F3
315
GRADE
Note
1. Measured at 60 C.
2013 Jul 31
461
Ferroxcube
EP20
COIL FORMER
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
13.9 0.1
15.9 0.1
0
2.650.1
1+0.15
0
12.5 0.1
9.2 0.1
+0.05
10.25 0.15
1.5 0.1
17.78
0.6
0.1
5 0.5
0.5 0.02
20.32 0.05
5.08
CBW623
17.78 0.05
25.1 0.2
21.9 0.2
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
40.3
12.4
39.4
3170
CSH-EP20-1S-10P-T
2 x 19.0
2 x 5.95
39.4
2 x 1500
CSH-EP20-2S-10P-T
2013 Jul 31
462
Ferroxcube
EP20
MOUNTING PARTS
General data
ITEM
REMARKS
FIGURE
TYPE NUMBER
Clasp
CLA-EP20-Z
Spring
SPR-EP20-Z
26.5
5.2 0.15
6.5
0.1
23.3
3.5
1.8
21.2
0.15
18.2
0.1
5.5
0.1
4.2
25.4 0.1
0.4
12
0.1
5.5 0.1
MFP176
12 0.1
MFP177
Dimensions in mm.
Dimensions in mm.
2013 Jul 31
463
Ferroxcube
Soft Ferrites
MFW063
2013 Jul 31
464
Ferroxcube
Soft Ferrites
Ve
(mm3)
Ae
(mm 2)
MASS
(g)
EPX7
255
16.5
2.1
EPX8
279
16.4
2.3
EPX9
304
16.3
2.5
EPX10
325
15.0
2.5
AL value (nH)
gap type:
A asymmetrical gap to AL value
E symmetrical gap to AL value
core material
core size
core type
MFW068
C S H S EPX9 1S 8P
number and type of pins:
D dual termination
F flat
L long
number of sections
associated core type
mounting type: S surface mount
mounting orientation: H horizontal
plastic material type:
P thermoplastic
S thermoset
coil former (bobbin)
MFW067
2013 Jul 31
465
Ferroxcube
EPX7
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.931
mm1
Ve
effective volume
255
mm3
Ie
effective length
15.4
mm
Ae
effective area
16.5
mm2
Amin
minimum area
14.5
mm2
2.1
0
3.4 0.2
0
9 0.4 1.7
0.1
2.3
+ 0.4
7.2 0
7.5 0
0.2
4.6
9.4 0
0.4
+ 0.4
0
MFP001
Dimensions in mm.
AL (nH)
TYPE NUMBER
3C94
1950 25 %
1440
EPX7-3C94
3C96
1750 25 %
1300
EPX7-3C96
3F35
1400 25 %
1040
EPX7-3F35
2013 Jul 31
AL (nH)
2500 25 %
1850
466
TYPE NUMBER
EPX7-3B46
Ferroxcube
EPX7
3E6
AL (nH)
TYPE NUMBER
63 3 %
47
450
EPX7-3E55-A63
100 3 %
74
250
EPX7-3E55-A100
160 3 %
119
150
EPX7-3E55-A160
250 5 %
185
90
EPX7-3E55-A250
315 5 %
233
70
EPX7-3E55-A315
400 8 %
296
50
EPX7-3E55-A400
8400 + 40 / 30 %
6220
EPX7-3E55
9300 + 40 / 30 %
6890
EPX7-3E6
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
3C94
320
0.02
0.13
3C96
340
0.015
0.1
0.08
3F35
300
0.03
0.25
2013 Jul 31
467
Ferroxcube
EPX7
COIL FORMERS
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
0
7.1 0.2
4.5
0
4.55 0.15
0
0.1
2
3.1 min.
+ 0.15
3.45 0
+ 0.15
5.95
0
0
7.05
0.15
11 ref.
0.8
2.5
0.6
0.6
8.6
7.5 0.1
0
9 0.5
10.7 0.2
12.4 0.2
0.3 0.05
2
6
0
9.4
0.2
1.2
MFP010
Dimensions in mm.
Winding data and area product for 8-pads EPX7 coil former
NUMBER OF
SECTIONS
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
3.64
3.4
23.3
60.1
2013 Jul 31
468
TYPE NUMBER
CSHS-EPX7-1S-8P-T
Ferroxcube
EPX7
SPECIFICATION
Pin material
Solderability
0
7.1 0.2
4.5
0
4.55 0.15
0
0.1
2.54
3.1 min.
+ 0.15
3.45 0
+ 0.15
5.95
0
0
7.05
0.15
11 ref.
0.8
2.5
0.8
0.6
8.6
7.5 0.1
0
9 0.5
10.7 0.2
12.4 0.2
0.3 0.05
2.54
7.62
0
9.4 0.2
1.2
MFP013
Dimensions in mm.
Winding data and area product for 8-pads EPX7 coil former
NUMBER OF
SECTIONS
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
3.64
3.4
23.3
60.1
2013 Jul 31
469
TYPE NUMBER
CSHS-EPX7-1S-8P
Ferroxcube
EPX7
MOUNTING PARTS
General data
ITEM
REMARKS
Mounting
clamp
0.3 0.05
7
9.4
0.1 0.2
9 0.1
7
0.2
6.5 0.15
10.5 0.2
MFW052
6 0.15
Dimensions in mm.
2013 Jul 31
470
CLM-EPX7
Ferroxcube
EPX8
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
0
3.4 0.2
UNIT
(I/A)
1.04
mm1
Ve
effective volume
279
mm3
Ie
effective length
17.0
mm
Ae
effective area
16.4
mm2
Amin
minimum area
14.5
mm2
2.3
0
9 0.4 1.7
0.1
2.3
+ 0.4
7.2 0
8.5 0
0.2
5.6
9.4 0
0.4
+ 0.4
0
MFP011
Dimensions in mm.
AL (nH)
TYPE NUMBER
3C94
1800 25 %
1490
EPX8-3C94
3C96
1650 25 %
1365
EPX8-3C96
3F35
1300 25 %
1075
EPX8-3F35
2013 Jul 31
AL (nH)
2400 25 %
1990
471
TYPE NUMBER
EPX8-3B46
Ferroxcube
EPX8
3E6
AL (nH)
TYPE NUMBER
63 3 %
52
440
EPX8-3E55-A63
100 3 %
83
250
EPX8-3E55-A100
160 3 %
132
150
EPX8-3E55-A160
250 5 %
207
90
EPX8-3E55-A250
315 5 %
261
70
EPX8-3E55-A315
400 8 %
331
50
EPX8-3E55-A400
7800 + 40 / 30 %
6455
EPX8-3E55
8700 + 40 / 30 %
7200
EPX8-3E6
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
3C94
320
0.022
3C96
340
0.017
3F35
300
GRADE
2013 Jul 31
472
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
0.14
0.11
0.09
0.032
0.27
Ferroxcube
EPX9
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
1.15
mm1
Ve
effective volume
304
mm3
Ie
effective length
18.7
mm
Ae
effective area
16.3
mm2
Amin
minimum area
14.5
mm2
2.5
0
3.4 0.2
0
9 0.4 1.7
0.1
2.3
+ 0.4
7.2 0
+ 0.4
6.6 0
0
9.5 0.2
0
9.4
0.4
MFP012
Dimensions in mm.
AL (nH)
TYPE NUMBER
3C94
1700 25 %
1560
EPX9-3C94
3C96
1550 25 %
1420
EPX9-3C96
3F35
1200 25 %
1100
EPX9-3F35
2013 Jul 31
AL (nH)
2300 25 %
2110
473
TYPE NUMBER
EPX9-3B46
Ferroxcube
EPX9
3E6
AL (nH)
TYPE NUMBER
63 3 %
58
440
EPX9-3E55-A63
100 3 %
92
250
EPX9-3E55-A100
160 3 %
146
150
EPX9-3E55-A160
250 5 %
229
90
EPX9-3E55-A250
315 5 %
288
70
EPX9-3E55-A315
400 8 %
366
50
EPX9-3E55-A400
7300 + 40 / 30 %
6680
EPX9-3E55
8200 + 40 / 30 %
7500
EPX9-3E6
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
3C94
320
0.023
3C96
340
0.018
3F35
300
GRADE
2013 Jul 31
474
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
0.15
0.12
0.1
0.035
0.3
Ferroxcube
EPX9
COIL FORMERS
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
0
7.1 0.2
6.5
0
4.55 0.15
0
0.1
2
5.1 min.
+ 0.15
3.45 0
+ 0.15
5.95
0
0
7.05
0.15
11 ref.
0.8
2.5
0.6
0.6
10.6
9.5 0.1
0
11 0.5
12.7 0.2
14.4 0.2
0.3 0.05
2
6
0
9.4
0.2
1.2
MFP020
Dimensions in mm.
Winding data and area product for 8-pads EPX9 coil former
NUMBER OF
SECTIONS
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
5.99
5.4
23.3
97.6
2013 Jul 31
475
TYPE NUMBER
CSHS-EPX9-1S-8P-T
Ferroxcube
EPX9
SPECIFICATION
Pin material
Solderability
0
7.1 0.2
6.5
0
4.55 0.15
0
0.1
2.54
5.1 min.
+ 0.15
3.45 0
+ 0.15
5.95
0
0
7.05
0.15
11 ref.
0.8
2.5
0.8
0.6
10.6
9.5 0.1
0
11 0.5
12.7 0.2
14.4 0.2
0.3 0.05
2.54
7.62
0
9.4 0.2
1.2
MFP021
Dimensions in mm.
Winding data and area product for 8-pads EPX9 coil former
NUMBER OF
SECTIONS
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
5.99
5.4
23.3
97.6
2013 Jul 31
476
TYPE NUMBER
CSHS-EPX9-1S-8P
Ferroxcube
EPX10
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
1.45
mm1
Ve
effective volume
325
mm3
Ie
effective length
21.7
mm
Ae
effective area
15.0
mm2
Amin
minimum area
12.5
mm2
2.5
1.85
0.1
0
3.45 0.3
0
7.85 0.4
1.4
5.0
+ 0.4
9.1 0
10.4
+ 0.4
7.2 0
0
0.2
0
11.8 0.6
MFP025
Dimensions in mm.
AL (nH)
TYPE NUMBER
3C94
1400 25 %
1620
EPX10-3C94
3C96
1250 25 %
1440
EPX10-3C96
3F35
950 25 %
1100
EPX10-3F35
2013 Jul 31
AL (nH)
1900 25 %
2200
477
TYPE NUMBER
EPX10-3B46
Ferroxcube
EPX10
AL (nH)
TYPE NUMBER
63 3 %
73
410
100 3 %
115
230
EPX10-3E55-A100
160 3 %
185
135
EPX10-3E55-A160
EPX10-3E55-A63
250 5 %
288
80
EPX10-3E55-A250
315 5 %
363
60
EPX10-3E55-A315
EPX10-3E55-A400
400 8 %
3E6
462
50
6000 + 40 / 30 %
6920
EPX10-3E55
6600 + 40 / 30 %
7620
EPX10-3E6
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
3C94
320
0.025
3C96
340
0.018
3F35
300
GRADE
2013 Jul 31
478
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
0.16
0.13
0.1
0.04
0.3
Ferroxcube
Soft Ferrites
2013 Jul 31
479
Ferroxcube
Soft Ferrites
CBW586
2013 Jul 31
480
Ferroxcube
Soft Ferrites
Ve
(mm3)
Ae
(mm2)
MASS
(g)
EQ13
348
19.9
0.8
PLT13
315
19.8
0.6
EQ20/R
1960
59.0
5.1
PLT20/S
1500
59.8
3.0
EQ25
4145
100
11
EQ25/LP
2370 (1)
89.7(1)
8.2
PLT25
EQ30
4970
108
PLT30
3400
108
7.6
EQ38/8/25
7900
152
21.5
Note:
(1) In combination with PLT25
EQ 30 3C90
dth
core material
core size:
core type
CBW587
4.9
13.2
PLT 30 3C90
core material
core size:
core type
MFW103
C S V EQ30 1S 10PX
number and type of pins:
D dual termination
F flat
L long
number of sections
associated core type
mounting orientation: H horizontal
V vertical
plastic material type: P thermoplastic
S thermoset
coil former (bobbin)
CBW588
2013 Jul 31
481
Ferroxcube
EQ13
CORES
Effective core parameters of a set of EQ cores
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.911
mm1
Ve
effective volume
348
mm3
Ie
effective length
17.5
mm
Ae
effective area
19.9
mm2
Amin
minimum area
19.2
mm2
0.8
1.75 halfpage
handbook,
2.85
0.075
0.125
12.8 0.3
11.2 0.3
9.05 0.3
5.0 0.15
8.7
0.25
CBW561
Dimensions in mm.
PARAMETER
VALUE
UNIT
mm1
(I/A)
Ve
effective volume
315
mm3
Ie
effective length
15.9
mm
0.803
Ae
effective area
19.8
mm2
Amin
minimum area
19.2
mm2
mass of plate
0.6
handbook, halfpage
12.8 0.3
1.1 0.1
TYPE NUMBER
3C94
PLT13/9/1-3C94
3C95
PLT13/9/1-3C95
3C96
PLT13/9/1-3C96
3F35
PLT13/9/1-3F35
3F4
PLT13/9/1-3F4
3F45
PLT13/9/1-3F45
8.7 0.25
MFP104
R0.5
Dimensions in mm.
Fig.2 PLT13/9/1.
2013 Jul 31
482
Ferroxcube
EQ13
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C94
1700 25 %
1230
EQ13-3C94
3C95
1930 25 %
1350
EQ13-3C95
3C96
1600 25 %
1160
EQ13-3C96
3F35
1300 25 %
942
EQ13-3F35
3F4
950 25 %
689
EQ13-3F4
3F45
950 25 %
689
EQ13-3F45
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C94
1800 25 %
1150
EQ13-3C94
3C95
2030 25 %
1300
EQ13-3C95
3C96
1700 25 %
1085
EQ13-3C96
3F35
1350 25 %
863
EQ13-3F35
3F4
1000 25 %
639
EQ13-3F4
3F45
1000 25 %
639
EQ13-3F45
2013 Jul 31
483
Ferroxcube
EQ13
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
EQ+EQ13-3C94
320
0.031
0.21
EQ+PLT13-3C94
320
0.028
0.19
EQ+EQ13-3C95
320
0.19
0.18
EQ+PLT13-3C95
320
0.17
0.16
EQ+EQ13-3C96
340
0.023
0.16
0.13
EQ+PLT13-3C96
340
0.021
0.14
0.12
EQ+EQ13-3F35
300
0.047
EQ+PLT13-3F35
300
0.043
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
EQ+EQ13-3F35
300
0.36
EQ+PLT13-3F35
300
0.33
EQ+EQ13-3F4
300
0.1
0.17
0.15
EQ+PLT13-3F4
300
0.095
EQ+EQ13-3F45
300
0.08
0.3
0.14
EQ+PLT13-3F45
300
0.07
0.26
0.12
2013 Jul 31
484
Ferroxcube
EQ20/R
CORES
Effective core parameters of a set of EQ cores
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.563
mm1
Ve
effective volume
1960
mm3
Ie
effective length
33.2
mm
Ae
effective area
59.0
mm2
Amin
minimum area
55.0
mm2
5.1
4.1
0.15
5.3
6.3
0.15 0.1
20 0.35
18 0.35
12.86 0.35
8.8 0.15
14
0.3
2.9
0.1
MFP002
Dimensions in mm.
PARAMETER
VALUE
UNIT
mm1
(I/A)
Ve
effective volume
1500
mm3
Ie
effective length
25.1
mm
0.420
Ae
effective area
59.8
mm2
Amin
minimum area
55.0
mm2
mass of plate
3.0
handbook, halfpage
20 0.35
1.9
0.1
2.3
0.05
TYPE NUMBER
3C94
PLT20/14/2/S-3C94
3C95
PLT20/14/2/S-3C95
3C96
PLT20/14/2/S-3C96
3F35
PLT20/14/2/S-3F35
3F4
PLT20/14/2/S-3F4
3F45
PLT20/14/2/S-3F45
14
0.3
3
0.1
MFP006
R0.8
Dimensions in mm.
Fig.2 PLT20/14/2/S.
2013 Jul 31
485
Ferroxcube
EQ20/R
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C94
3500 25 %
1570
EQ20/R-3C94
3C95
4160 25 %
1865
EQ20/R-3C95
3C96
3150 25 %
1410
EQ20/R-3C96
3F35
2400 25 %
1075
EQ20/R-3F35
3F4
1700 25 %
762
EQ20/R-3F4
3F45
1700 25 %
762
EQ20/R-3F45
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C94
4750 25 %
1590
EQ20/R-3C94
3C95
5660 25 %
1890
EQ20/R-3C95
3C96
4350 25 %
1450
EQ20/R-3C96
3F35
3300 25 %
1100
EQ20/R-3F35
3F4
2200 25 %
735
EQ20/R-3F4
3F45
2200 25 %
735
EQ20/R-3F45
2013 Jul 31
486
Ferroxcube
EQ20/R
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
EQ+EQ20/R-3C94
320
EQ+PLT20/S-3C94
320
f = 500 kHz;
= 50 mT;
B
T = 100 C
0.17
1.2
0.13
0.9
EQ+EQ20/R-3C95
320
1.16
1.1
EQ+PLT20/S-3C95
320
0.89
0.84
EQ+EQ20/R-3C96
340
0.13
0.9
0.74
EQ+PLT20/S-3C96
340
0.091
0.68
0.56
EQ+EQ20/R-3F35
300
0.27
EQ+PLT20/S-3F35
300
0.2
CORE
COMBINATION
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
EQ+EQ20/R-3F35
300
2.1
EQ+PLT20/S-3F35
300
1.6
EQ+EQ20/R-3F4
300
0.6
0.94
EQ+PLT20/S-3F4
300
0.45
0.72
EQ+EQ20/R-3F45
300
0.45
1.7
0.75
EQ+PLT20/S-3F45
300
0.35
1.3
0.6
MOUNTING PARTS
General data
ITEM
SPECIFICATION
Clamping force
30 N
Clamp material
Type number
CLM-EQ20/PLT20
19.65
2.5
7.2
3.15
0.4
R 0.25
8.6 0.1
85
20.4 0.3
1.6
MFP120
Dimensions in mm.
2013 Jul 31
487
Ferroxcube
EQ25
CORES
Effective core parameters of a set of EQ cores
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.414
mm1
Ve
effective volume
4145
mm3
Ie
effective length
41.4
mm
Ae
effective area
100
mm2
Amin
minimum area
95.0
mm2
11
5.15 halfpage
handbook,
8.0
0.1
0.15
25 0.4
22 0.4
15.2 0.7
11 0.2
18
0.3
MFP003
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C94
4800 25 %
1580
EQ25-3C94
3C95
5710 25 %
1880
EQ25-3C95
3C96
4400 25 %
1450
EQ25-3C96
3F35
3350 25 %
1100
EQ25-3F35
3F4
2300 25 %
758
EQ25-3F4
3F45
2300 25 %
758
EQ25-3F45
2013 Jul 31
488
Ferroxcube
EQ25
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
EQ+EQ25-3C94
320
0.37
2.5
EQ+EQ25-3C95
320
2.45
2.32
EQ+EQ25-3C96
340
0.28
1.9
1.5
EQ+EQ25-3F35
300
0.56
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
EQ+EQ25-3F35
300
4.3
EQ+EQ25-3F4
300
1.25
2.0
EQ+EQ25-3F45
300
0.95
3.5
1.6
2013 Jul 31
489
Ferroxcube
EQ25/LP
CORES
Effective core parameters of a EQ/LP/PLT
combination
SYMBOL
(I/A)
PARAMETER
core factor (C1)
VALUE
UNIT
0.294
mm1
Ve
effective volume
2370
mm3
Ie
effective length
26.4
mm
Ae
effective area
89.7
mm2
Amin
minimum area
82.8
mm2
8.2
mass of plate
4.9
3.2
handbook,
halfpage
5.6
0.05
0.15
25 0.4
22 0.4
15.2 0.7
11 0.2
18
0.3
MFP004
Dimensions in mm.
TYPE NUMBER
3C94
PLT25/18/2-3C94
3C95
PLT25/18/2-3C95
3C96
PLT25/18/2-3C96
3F35
PLT25/18/2-3F35
3F4
PLT25/18/2-3F4
3F45
PLT25/18/2-3F45
handbook, halfpage
25 0.4
2.3 0.05
18 0.3
R1.0
MFP007
Dimensions in mm.
Fig.2 PLT25/18/2.
2013 Jul 31
490
Ferroxcube
EQ25/LP
GRADE
AIR GAP
(m)
TYPE NUMBER
3C94
6100 25 %
1430
EQ25/LP-3C94
3C95
7130 25 %
1670
EQ25/LP-3C95
3C96
5600 25 %
1310
EQ25/LP-3C96
3F35
4350 25 %
1020
EQ25/LP-3F35
3F4
3100 25 %
725
EQ25/LP-3F4
3F45
3100 25 %
725
EQ25/LP-3F45
CORE
COMBINATION
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
EQ/LP+PLT25-3C94
320
0.21
1.4
EQ/LP+PLT25-3C95
320
1.4
1.33
EQ/LP+PLT25-3C96
340
0.16
1.1
0.89
EQ/LP+PLT25-3F35
300
0.32
f = 500 kHz;
= 50 mT;
B
T = 100 C
CORE
COMBINATION
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
EQ/LP+PLT25-3F35
300
EQ/LP+PLT25-3F4
300
EQ/LP+PLT25-3F45
300
2013 Jul 31
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
2.5
0.71
1.14
0.54
2.0
0.95
491
f = 3 MHz;
= 10 mT;
B
T = 100 C
Ferroxcube
EQ30
CORES
Effective core parameters of a set of EQ cores
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.426
mm1
Ve
effective volume
4970
mm3
Ie
effective length
46.0
mm
Ae
effective area
108
mm2
Amin
minimum area
95.0
mm2
13.2
handbook,
5.3halfpage
handbook,
halfpage
8
0.15
0.2
30 0.4
26 0.4
19.45 0.4
11 0.2
20
0.3
CBW562
Dimensions in mm.
PARAMETER
VALUE
UNIT
mm1
(I/A)
Ve
effective volume
3910
mm3
Ie
effective length
36.2
mm
0.335
Ae
effective area
108
mm2
Amin
minimum area
95.0
mm2
mass of plate
7.6
handbook, halfpage
30 0.4
2.7 0.1
TYPE NUMBER
3C94
PLT30/20/3-3C94
3C95
PLT30/20/3-3C95
3C96
PLT30/20/3-3C96
3F35
PLT30/20/3-3F35
3F4
PLT30/20/3-3F4
3F45
PLT30/20/3-3F45
20 0.3
MFP008
Dimensions in mm.
Fig.2 PLT30/20/3.
2013 Jul 31
492
Ferroxcube
EQ30
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C94
5400 25 %
1830
EQ30-3C94
3C95
6630 25 %
2250
EQ30-3C95
3C96
4900 25 %
1660
EQ30-3C96
3F35
3600 25 %
1220
EQ30-3F35
3F4
2400 25 %
814
EQ30-3F4
3F45
2400 25 %
814
EQ30-3F45
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C94
6550 25 %
1750
EQ30-3C94
3C95
7960 25 %
2120
EQ30-3C95
3C96
6000 25 %
1600
EQ30-3C96
3F35
4600 25 %
1225
EQ30-3F35
3F4
3200 25 %
853
EQ30-3F4
3F45
3200 25 %
853
EQ30-3F45
2013 Jul 31
493
Ferroxcube
EQ30
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
EQ+EQ30-3C94
320
0.45
3.0
EQ+PLT30-3C94
320
0.35
2.3
EQ+EQ30-3C95
320
2.93
2.78
EQ+PLT30-3C95
320
2.3
2.2
EQ+EQ30-3C96
340
0.34
2.3
1.9
EQ+PLT30-3C96
340
0.23
1.7
1.4
EQ+EQ30-3F35
300
0.67
EQ+PLT30-3F35
300
0.52
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
EQ+EQ30-3F35
300
5.2
EQ+PLT30-3F35
300
4.1
2.4
EQ+EQ30-3F4
300
1.5
EQ+PLT30-3F4
300
1.17
1.9
EQ+EQ30-3F45
300
1.15
4.3
2.0
EQ+PLT30-3F45
300
0.9
3.4
1.55
2013 Jul 31
494
Ferroxcube
EQ30
COIL FORMERS
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
20 0.15
17.4 0.2
5 0.1
2.5 0.2
4.5
0.3
26.6
0.15
21.3
0.2
31
0.2
11.3 +0.2
0
5.5
0.2
8.4
0.2
16 0.3
29 0.3
CBW563
10
1.3
0
0.2
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
52.0
8.2
60
5620
2013 Jul 31
495
TYPE NUMBER
CSV-EQ30-1S-10P
Ferroxcube
EQ38/8/25
CORES
Effective core parameters of a set of EQ cores
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.341
mm1
Ve
effective volume
7900
mm3
Ie
effective length
51.9
mm
Ae
effective area
152
mm2
Amin
minimum area
119
mm2
21.5
5.3
0.2
8
0.15
38.1 0.7
33.1 0.6
24.76 0.5
14 0.2
25.4
0.5
R0.8 (4x)
R0.8 (4x)
R0.4
R0.8 (4x)
MFP223
Dimensions in mm.
PARAMETER
VALUE
UNIT
mm1
(I/A)
Ve
effective volume
6190
mm3
Ie
effective length
41.7
mm
0.282
Ae
effective area
148
mm2
Amin
minimum area
119
mm2
mass of plate
14.6
handbook, halfpage
38.1 0.7
2.7 0.2
TYPE NUMBER
3C94
PLT38/25/2.7-3C94
3C95
PLT38/25/2.7-3C95
3C96
PLT38/25/2.7-3C96
3F35
PLT38/25/2.7-3F35
3F4
PLT38/25/2.7-3F4
3F45
PLT38/25/2.7-3F45
25.4 0.5
MFP237
Dimensions in mm.
Fig.2 PLT38/25/2.7.
2013 Jul 31
496
Ferroxcube
EQ38/8/25
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C94
7000 25 %
1900
EQ38/8/25-3C94
3C95
8810 25 %
2395
EQ38/8/25-3C95
3C96
6300 25 %
1710
EQ38/8/25-3C96
3F35
4500 25 %
1220
EQ38/8/25-3F35
3F4
3000 25 %
815
EQ38/8/25-3F4
3F45
3000 25 %
815
EQ38/8/25-3F45
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C94
8200 25 %
1840
PLT38/25/2.7-3C94
3C95
10220 25 %
2295
PLT38/25/2.7-3C95
3C96
7400 25 %
1660
PLT38/25/2.7-3C96
3F35
5300 25 %
1190
PLT38/25/2.7-3F35
3F4
3500 25 %
785
PLT38/25/2.7-3F4
3F45
3500 25 %
785
PLT38/25/2.7-3F45
2013 Jul 31
497
Ferroxcube
EQ38/8/25
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
EQ+EQ38-3C94
320
0.72
4.8
EQ+PLT38-3C94
320
0.56
3.8
EQ+EQ38-3C95
320
4.66
4.42
EQ+PLT38-3C95
320
3.65
3.47
EQ+EQ38-3C96
340
0.52
3.5
3.1
2.4
EQ+PLT38-3C96
340
0.42
2.8
EQ+EQ38-3F35
300
1.2
EQ+PLT38-3F35
300
0.94
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
EQ+EQ38-3F35
300
8.9
EQ+PLT38-3F35
300
7.0
5.8
EQ+EQ38-3F4
300
4.1
EQ+PLT38-3F4
300
3.2
4.6
EQ+EQ38-3F45
300
3.2
12
4.7
EQ+PLT38-3F45
300
2.5
9.0
3.7
2013 Jul 31
498
Ferroxcube
Soft Ferrites
2013 Jul 31
499
Ferroxcube
Soft Ferrites
ER cores
MFP105
2013 Jul 31
500
Ferroxcube
Soft Ferrites
ER cores
Ae
(mm2)
MASS
(g)
ER28/14/11
5 260
81.4
14
ER28/17/11
6 140
81.4
16
CORE TYPE
ER35/21/11
9 710
107
23
ER35W/21/11
9548
103
27
ER40/22/13
14600
149
37
ER42/22/16
19200
194
50
ER42/22/15
16800
170
42
ER48/21/21
25500
255
64
ER48/18/18
20300
231
51
ER54/18/18
23000
250
61
CBW091
2013 Jul 31
501
Ferroxcube
ER cores
ER28/14/11
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.786
mm1
Ve
effective volume
5260
mm3
Ie
effective length
64.0
mm
Ae
effective area
81.4
mm2
Amin
minimum area
77.0
mm2
14
handbook, halfpage
9.75
0.4
14
0.2
28.55 0.55
21.75 0.5
9.9 0.25
11.4
0.35
MGC189
Dimensions in mm.
Core halves
Clamping force for A L measurements, 40 20 N. Gapped cores are available on request.
GRADE
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
2900 25%
1800
ER28/14/11-3C90
3C94
2900 25%
1800
ER28/14/11-3C94
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
T = 100 C
T = 100 C
3C90
320
0.63
0.67
3C94
320
0.5
3.2
GRADE
2013 Jul 31
502
Ferroxcube
ER cores
ER28/17/11
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.928
mm1
Ve
effective volume
6140
mm3
Ie
effective length
75.5
mm
Ae
effective area
81.4
mm2
Amin
minimum area
77.0
mm2
16
handbook, halfpage
12.65
0.4
16.9
0.25
28.55 0.55
21.75 0.5
9.9 0.25
11.4
0.35
MGC311
Dimensions in mm.
Core halves
Clamping force for A L measurements, 40 20 N. Gapped cores are available on request.
GRADE
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
2 500 25%
1900
ER28/17/11-3C90
3C94
2 500 25%
1900
ER28/17/11-3C94
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
T = 100 C
T = 100 C
3C90
320
0.74
0.77
3C94
320
0.58
3.7
GRADE
2013 Jul 31
503
Ferroxcube
ER cores
ER35/21/11
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.849
mm1
Ve
effective volume
9710
mm3
Ie
effective length
90.8
mm
Ae
effective area
107
mm2
Amin
minimum area
100
mm2
23
handbook, halfpage
14.75
0.35
20.7
0.2
35 0.65
26.15 0.55
11.3 0.25
11.4
0.35
MGC304
Dimensions in mm.
Core halves
Clamping force for A L measurements, 40 20 N. Gapped cores are available on request.
GRADE
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
2 800 25%
1900
ER35/21/11-3C90
3C94
2 800 25%
1900
ER35/21/11-3C94
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
T = 100 C
T = 100 C
3C90
320
1.2
1.3
3C94
320
0.95
5.8
GRADE
2013 Jul 31
504
Ferroxcube
ER cores
ER35W/21/11
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.900
mm1
Ve
effective volume
9548
mm3
handbook, halfpage
15
0.2
20.9
0.2
Ie
effective length
92.7
mm
Ae
effective area
103
mm2
Amin
minimum area
100
mm2
35 0.65
27
27.1 0.7
11.3
0.25
11.3
0.35
CBW571
Dimensions in mm.
Core halves
Clamping force for A L measurements, 40 20 N. Gapped cores are available on request.
GRADE
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
3 000 25%
2150
ER35W/21/11-3C90
3C94
3 000 25%
2150
ER35W/21/11-3C94
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
T = 100 C
T = 100 C
3C90
320
1.2
1.3
3C94
320
1.0
5.7
GRADE
2013 Jul 31
505
Ferroxcube
ER cores
ER40/22/13
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.658
mm1
Ve
effective volume
14600
mm3
Ie
effective length
98.0
mm
Ae
effective area
149
mm2
Amin
minimum area
139
mm2
37
handbook, halfpage
15.45
0.35
22.4
0.2
40 0.7
29.6 0.6
13.3 0.25
13.4
0.35
MGC305
Dimensions in mm.
Core halves
Clamping force for A L measurements, 50 20 N. Gapped cores are available on request.
GRADE
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
3 600 25%
1900
ER40/22/13-3C90
3C94
3 600 25%
1900
ER40/22/13-3C94
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
T = 100 C
T = 100 C
3C90
320
1.8
1.9
3C94
320
1.45
8.7
GRADE
2013 Jul 31
506
Ferroxcube
ER cores
ER42/22/16
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.509
mm1
Ve
effective volume
19200
mm3
Ie
effective length
98.8
mm
Ae
effective area
194
mm2
Amin
minimum area
189
mm2
50
handbook, halfpage
15.45
0.35
22.4
0.2
42 0.75
30.05 0.65
15.5 0.3
15.6
0.4
MGC306
Dimensions in mm.
Core halves
Clamping force for A L measurements, 50 20 N. Gapped cores are available on request.
GRADE
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
4 600 25%
1900
ER42/22/16-3C90
3C94
4 600 25%
1900
ER42/22/16-3C94
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
T = 100 C
T = 100 C
3C90
320
2.3
2.4
3C94
320
1.8
11
GRADE
2013 Jul 31
507
Ferroxcube
ER cores
ER42/22/15
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.582
mm1
Ve
effective volume
16800
mm3
Ie
effective length
99.0
mm
Ae
effective area
170
mm2
Amin
minimum area
170
mm2
42
handbook, halfpage
0.7
15.6 0
21.8
0
0.4
1
0.7
1.2
30.4
0
0
15
0.6
42
15
0
0.6
MGC307
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
4 000 25%
1900
ER42/22/15-3C90
3C94
4 000 25%
1900
ER42/22/15-3C94
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C90
320
2.0
2.1
3C94
320
1.6
9.0
GRADE
2013 Jul 31
f = 100 kHz;
= 100 mT;
B
T = 100 C
508
f = 100 kHz;
= 200 mT;
B
T = 100 C
Ferroxcube
ER cores
ER48/21/21
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.392
mm1
Ve
effective volume
25500
mm3
Ie
effective length
100
mm
Ae
effective area
255
mm2
Amin
minimum area
248
mm2
64
handbook, halfpage
0.7
14.7 0
21.2
0
0.4
48 1
0.5
0.8
18 0.3
38
21
0.3
0.5
MGC308
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
5 700 25%
1900
ER48/21/21-3C90
3C94
5 700 25%
1900
ER48/21/21-3C94
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
3C90
320
3.1
3.3
3C94
320
2.6
15
GRADE
2013 Jul 31
509
f = 100 kHz;
= 200 mT;
B
T = 100 C
Ferroxcube
ER cores
ER48/18/18
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.377
mm1
Ve
effective volume
20300
mm3
Ie
effective length
87.0
mm
Ae
effective area
231
mm2
Amin
minimum area
221
mm2
51
11.45
0.25
18
0.2
48 1
36.8 0.8
17.6
0.4
17.6
0.4
MFP067
3C94
AL
(nH)
TYPE NUMBER
180 5%
54
2500
ER48/18/18-3C90-E180
265 5%
77
1500
ER48/18/18-3C90-E265
309 5%
93
1250
ER48/18/18-3C90-E309
370 5%
111
1000
ER48/18/18-3C90-E370
465 5%
1 40
750
6400 25%
1920
ER48/18/18-3C90
6400 25%
1920
ER48/18/18-3C94
ER48/18/18-3C90-E465
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
3C90
330
2.4
2.5
3C94
330
2.1
12
GRADE
2013 Jul 31
510
f = 100 kHz;
= 200 mT;
B
T = 100 C
Ferroxcube
ER cores
ER54/18/18
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.370
mm1
Ve
effective volume
23000
mm3
Ie
effective length
91.8
mm
Ae
effective area
250
mm2
Amin
minimum area
240
mm2
61
handbook, halfpage
11.1
0.3
18.3
0.2
53.5 1
40.65 0.85
17.9 0.4
17.95
0.35
MGC309
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
6100 25%
1800
ER54/18/18-3C90
3C94
6 100 25%
1800
ER54/18/18-3C94
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
3C90
320
2.8
2.9
3C94
320
2.3
12.5
GRADE
2013 Jul 31
511
f = 100 kHz;
= 200 mT;
B
T = 100 C
Ferroxcube
Soft Ferrites
MFP065
2013 Jul 31
512
Ferroxcube
Soft Ferrites
Ve
(mm3)
Ae
(mm2)
MASS
(g)
ER9.5/2.5/5
120
8.47
0.35
ER11/2.5/6
174
11.9
0.5
ER14.5/3/7
333
17.6
0.9
ER18/3.2/10
667
30.2
1.6
ER23/3.6/13
1340
50.2
3.2
ER32/6/25
5400
141
16
ER41/7.6/32
12900
225
37
ER51/10/38
25800
351
74.7
ER64/13/51
52600
566
152
MFP066
C P V S ER11 1S 10P
number and type of pins:
D dual termination
F flat
L long
number of sections
associated core type
mounting type: S surface mount
mounting orientation: H horizontal
V vertical
plastic material type: P thermoplastic
S thermoset
coil former (bobbin)
CBW364
2013 Jul 31
513
Ferroxcube
ER9.5/2.5/5
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
handbook, halfpage
VALUE
1.6 +0.15
0
UNIT
(I/A)
1.67
mm1
Ve
effective volume
120
mm3
Ie
effective length
14.2
mm
Ae
effective area
8.47
mm2
Amin
minimum area
7.60
mm2
0.35
2.45
0.05
9.5 0
0.3
+0.25
7.5
0
+0.2
7.1
0
3.5 0
0.2
5 0
0.2
CBW092
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C92
750 25%
1 000
ER9.5/2.5/5-3C92-S
3C93
850 25%
1 130
ER9.5/2.5/5-3C93-S
63 3%
84
200
ER9.5/2.5/5-3C94-A63-S
100 5%
133
120
ER9.5/2.5/5-3C94-A100-S
ER9.5/2.5/5-3C94-A160-S
3C94
213
70
1000 25%
160 8%
1 330
ER9.5/2.5/5-3C94-S
3C95
1150 25%
1540
ER9.5/2.5/5-3C95-S
3C96
900 25%
3F3
1 200
63 3%
84
200
ER9.5/2.5/5-3F3-A63-S
100 5%
133
120
ER9.5/2.5/5-3F3-A100-S
160 8%
213
70
850 25%
1 130
3F35
700 25%
930
3F4
40 3%
53
340
3F45
2013 Jul 31
ER9.5/2.5/5-3C96-S
ER9.5/2.5/5-3F3-A160-S
ER9.5/2.5/5-3F3-S
ER9.5/2.5/5-3F35-S
ER9.5/2.5/5-3F4-A40-S
63 5%
84
190
ER9.5/2.5/5-3F4-A63-S
100 5%
133
100
ER9.5/2.5/5-3F4-A100-S
525 25%
700
ER9.5/2.5/5-3F4-S
525 25%
700
ER9.5/2.5/5-3F45-S
514
Ferroxcube
ER9.5/2.5/5
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3E5
3600 +40/30%
4800
ER9.5/2.5/5-3E5-S
3E6
4800 +40/30%
6400
ER9.5/2.5/5-3E6-S
3C92
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 400 kHz;
= 50 mT;
B
f = 500 kHz;
= 50 mT;
B
T = 100 C
T = 25 C
T = 100 C
T = 100 C
T = 100 C
370
0.011
0.072
3C93
320
3C94
320
0.011(1)
0.011
0.072(1)
0.072
3C95
320
0.07
0.07
3C96
340
0.0085
0.058
0.018
0.045
3F3
300
0.015
0.025
3F35
300
0.011
0.016
3F4
250
1.
Measured at 140 C.
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 100 mT;
B
3F35
300
3F4
250
3F45
250
GRADE
2013 Jul 31
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
0.13
0.036
0.056
0.027
0.1
0.048
T = 100 C
515
f = 3 MHz;
= 10 mT;
B
T = 100 C
Ferroxcube
ER9.5/2.5/5
COIL FORMERS
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
7.3 0.1
1.6
4.45
handbook, full pagewidth0.08
1.7
3.6
0.08
2.95
0.1
2.05
min.
8.1
0.7
4.4
max.
9.1
0.25
11.7 max.
8.6 max.
2
CBW093
Dimensions in mm.
Winding data and area product for ER9.5/2.5/5 coil former (SMD) with 8 solder pads
NUMBER OF
SECTIONS
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
2.8
2.05
18.4
23.7
2013 Jul 31
516
TYPE NUMBER
CPVS-ER9.5-1S-8P-Z
Ferroxcube
ER9.5/2.5/5
MOUNTING PARTS
General data and ordering information
ITEM
REMARKS
FIGURE
Clamp
9.8
handbook, halfpage
5.5
CBW094
Dimensions in mm.
2013 Jul 31
517
TYPE NUMBER
CLM-ER9.5
Ferroxcube
ER11/2.5/6
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
handbook, halfpage
VALUE
1.5 +0.15
0
UNIT
(I/A)
1.23
mm1
Ve
effective volume
174
mm3
Ie
effective length
14.7
mm
Ae
effective area
11.9
mm2
Amin
minimum area
10.3
mm2
0.5
2.45
0.05
11 0
0.35
+0.3
8.7
0
8 +0.2
0
0
4.25
0.25
6 0
0.2
CBW095
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C92
1050 25%
1 030
ER11/2.5/6-3C92-S
3C93
1200 25%
1 170
ER11/2.5/6-3C93-S
3C94
100 3%
98
170
ER11/2.5/6-3C94-A100-S
160 5%
157
100
ER11/2.5/6-3C94-A160-S
246
60
1 370
250 8%
1400 25%
ER11/2.5/6-3C94-A250-S
ER11/2.5/6-3C94-S
3C95
1620 25%
1600
ER11/2.5/6-3C95-S
3C96
1250 25%
1 220
ER11/2.5/6-3C96-S
3F3
100 3%
98
170
ER11/2.5/6-3F3-A100-S
160 5%
157
100
ER11/2.5/6-3F3-A160-S
250 8%
3F35
3F4
3F45
2013 Jul 31
246
60
1200 25%
1 170
1000 25%
980
62
280
100 5%
98
160
ER11/2.5/6-3F4-A100-S
160 8%
157
85
ER11/2.5/6-3F4-A160-S
725 25%
710
ER11/2.5/6-3F4-S
725 25%
710
ER11/2.5/6-3F45-S
63 3%
518
ER11/2.5/6-3F3-A250-S
ER11/2.5/6-3F3-S
ER11/2.5/6-3F35-S
ER11/2.5/6-3F4-A63-S
Ferroxcube
ER11/2.5/6
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3E5
5000 +40/30%
4920
ER11/2.5/6-3E5-S
3E6
6700 +40/30%
6590
ER11/2.5/6-3E6-S
3C92
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 400 kHz;
= 50 mT;
B
f = 500 kHz;
= 50 mT;
B
T = 100 C
T = 25 C
T = 100 C
T = 100 C
T = 100 C
370
0.018
0.1
0.018(1)
0.1(1)
3C93
320
3C94
320
0.018
0.1
3C95
320
0.11
0.1
3C96
340
0.014
0.08
0.033
0.065
3F3
300
0.025
0.04
3F35
300
0.016
0.023
3F4
250
1.
Measured at 140 C.
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
3F35
300
3F4
250
3F45
250
GRADE
2013 Jul 31
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
0.18
0.052
0.084
0.04
0.15
0.07
519
f = 3 MHz;
= 10 mT;
B
T = 100 C
Ferroxcube
ER11/2.5/6
COIL FORMERS
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
1.6
1.6
4.5
0.1
2.8 1.85
0.1 min.
0.7
4.4
max.
9.2
12.35 max.
10
0.25
10.6 max.
2
CBW096
Dimensions in mm.
WINDING
AREA
(mm 2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
2.8
1.85
21.6
33.3
2013 Jul 31
520
TYPE NUMBER
CPVS-ER11-1S-12P
Ferroxcube
ER11/2.5/6
MOUNTING PARTS
General data and ordering information
ITEM
REMARKS
FIGURE
Clamp
11.5
handbook, halfpage
4.4
5.6
CBW097
Dimensions in mm.
2013 Jul 31
521
TYPE NUMBER
CLM-ER11
Ferroxcube
ER14.5/3/7
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
+0.2 halfpage
handbook,
1.55
0
UNIT
(I/A)
1.08
mm1
Ve
effective volume
333
mm3
Ie
effective length
19.0
mm
Ae
effective area
17.6
mm2
Amin
minimum area
17.3
mm2
0.9
2.95
0.05
14.5 0.2
11.8 0.2
4.8 0
0.2
6.8 0
0.2
CBW229
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C92
1 250 25%
1070
ER14.5/3/7-3C92-S
3C93
1 400 25%
1200
ER14.5/3/7-3C93-S
3C94
100 3%
86
250
ER14.5/3/7-3C94-A100-S
160 5%
137
150
ER14.5/3/7-3C94-A160-S
ER14.5/3/7-3C94-A250-S
250 8%
1 600 25%
215
90
1370
ER14.5/3/7-3C94-S
ER14.5/3/7-3C95-S
3C95
1850 25%
1600
3C96
1 500 25%
1290
86
250
160 5%
137
150
ER14.5/3/7-3F3-A160-S
250 8%
215
90
ER14.5/3/7-3F3-A250-S
3F3
100 3%
1 400 25%
1200
3F35
1 150 25%
990
3F4
100 3%
86
240
3F45
2013 Jul 31
ER14.5/3/7-3C96-S
ER14.5/3/7-3F3-A100-S
ER14.5/3/7-3F3-S
ER14.5/3/7-3F35-S
ER14.5/3/7-3F4-A100-S
160 5%
137
130
ER14.5/3/7-3F4-A160-S
250 8%
215
70
ER14.5/3/7-3F4-A250-S
850 25%
730
ER14.5/3/7-3F4-S
850 25%
730
ER14.5/3/7-3F45-S
522
Ferroxcube
ER14.5/3/7
AIR GAP
(m)
7 900 +40/30%
6800
GRADE
3E6
TYPE NUMBER
ER14.5/3/7-3E6-S
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 400 kHz;
= 50 mT;
B
f = 500 kHz;
= 50 mT;
B
T = 100 C
T = 25 C
T = 100 C
T = 100 C
T = 100 C
3C92
370
0.032
0.2
3C93
320
0.032(1)
0.2(1)
3C94
320
0.032
0.2
3C95
320
0.2
0.19
0.13
GRADE
3C96
340
0.025
0.16
0.06
3F3
300
0.043
0.061
3F35
300
0.03
0.045
3F4
250
1.
Measured at 140 C.
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
3F35
300
3F4
250
3F45
250
GRADE
2013 Jul 31
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
0.35
0.1
0.16
0.077
0.29
0.13
523
f = 3 MHz;
= 10 mT;
B
T = 100 C
Ferroxcube
ER14.5/3/7
COIL FORMERS
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
1.7
11.4 0.1
5.9 0.1
14 0.1
1.7
5 0.1
3
0.1 5.45
max.
1.9 min.
0.7
14.6
10
16.15 max.
13.6
2.5
CBW262
Dimensions in mm.
Winding data and area product for ER14.5/3/7 coil former (SMD) with 10 solder pads
NUMBER OF
SECTIONS
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
5.1
1.9
27
89.8
2013 Jul 31
524
TYPE NUMBER
CPVS-ER14.5-1S-10P-Z
Ferroxcube
ER14.5/3/7
MOUNTING PARTS
General data and ordering information
ITEM
REMARKS
Clamp
FIGURE
15
handbook, halfpage
5.5
0.15
6.5
0.2
1.4
CBW263
Dimensions in mm.
2013 Jul 31
525
TYPE NUMBER
CLM-ER14.5
Ferroxcube
ER18/3.2/10
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.730
mm1
Ve
effective volume
667
mm3
Ie
effective length
22.1
mm
Ae
effective area
30.2
mm2
Amin
minimum area
30.1
mm2
1.6
1.6 0.1
3.15
0.1
18.0 0.35
15.6 0.3
13.5 min
6.2
0.15
9.7
0.2
R0.8 (8)
MFP028
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
160 3 %
93
260
ER18/3.2/10-3C92-A160-S
250 5 %
146
150
ER18/3.2/10-3C92-A250-S
232
85
1 100
400 8 %
1900 25 %
ER18/3.2/10-3C92-A400-S
ER18/3.2/10-3C92-S
3C93
2200 25 %
1270
ER18/3.2/10-3C93-S
3C95
3120 25 %
1810
ER18/3.2/10-3C95-S
3C96
160 3 %
93
260
ER18/3.2/10-3C96-A160-S
250 5 %
146
155
ER18/3.2/10-3C96-A250-S
232
90
2400 25 %
400 8 %
1 100
ER18/3.2/10-3C96-S
3F3
2400 25 %
1 100
ER18/3.2/10-3F3-S
3F35
160 3 %
93
260
ER18/3.2/10-3F35-A160-S
250 5 %
146
150
ER18/3.2/10-3F35-A250-S
400 8 %
232
85
1800 25 %
1100
ER18/3.2/10-3C96-A400-S
ER18/3.2/10-3F35-A400-S
ER18/3.2/10-3F35-S
3F4
1300 25 %
794
ER18/3.2/10-3F4-S
3F45
1300 25 %
794
ER18/3.2/10-3F45-S
2013 Jul 31
526
Ferroxcube
ER18/3.2/10
GRADE
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
3C92
370
0.052
0.35
3C93
320
0.052(1)
0.35(1)
3C95
320
0.4
0.38
3C96
340
0.035
0.26
0.22
3F3
300
0.07
0.13
3F35
300
0.078
0.61
1.
Measured at 140 C.
GRADE
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3F4
250
0.2
0.32
3F45
250
0.16
0.6
0.27
MOUNTING INFORMATION
18.55 min
15.1 max
13.3 max
6.5 min
10.1
min
MFP030
FOOTPRINT AREA
(mm 2)
15.0
34.2
225
2013 Jul 31
527
Ferroxcube
ER23/3.6/13
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.530
mm1
Ve
effective volume
1340
mm3
Ie
effective length
26.6
mm
Ae
effective area
50.2
mm2
Amin
minimum area
50.0
mm2
3.2
1.6 0.1
3.6
0.1
23.2 0.45
20.2 0.4
17.5 min
8.0
0.2
12.5
0.25
R0.8 (8)
MFP029
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
250 3 %
105
260
ER23/3.6/13-3C92-A250-S
400 5 %
169
150
ER23/3.6/13-3C92-A400-S
266
85
2800 25 %
630 8 %
1 180
3C93
3200 25 %
1 350
ER23/3.6/13-3C93-S
3C95
4460 25 %
1880
ER23/3.6/13-3C95-S
3C96
ER23/3.6/13-3C92-A630-S
ER23/3.6/13-3C92-S
250 3 %
105
270
ER23/3.6/13-3C96-A250-S
400 5 %
169
155
ER23/3.6/13-3C96-A400-S
266
90
3400 25 %
630 8 %
1 180
3F3
3400 25 %
1 180
3F35
250 3 %
105
260
ER23/3.6/13-3F35-A250-S
ER23/3.6/13-3F35-A400-S
400 5 %
169
150
630 8 %
266
85
2600 25 %
1180
ER23/3.6/13-3C96-A630-S
ER23/3.6/13-3C96-S
ER23/3.6/13-3F3-S
ER23/3.6/13-3F35-A630-S
ER23/3.6/13-3F35-S
3F4
1850 25 %
840
ER23/3.6/13-3F4-S
3F45
1850 25 %
840
ER23/3.6/13-3F45-S
2013 Jul 31
528
Ferroxcube
ER23/3.6/13
GRADE
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
3C92
370
0.11
0.70
3C93
320
0.11(1)
0.70(1)
3C95
320
0.87
0.82
3C96
340
0.070
0.52
0.44
3F3
300
0.15
0.31
3F35
300
0.16
1.2
1.
Measured at 140 C.
GRADE
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3F4
250
0.4
0.64
3F45
250
0.31
1.15
0.53
MOUNTING INFORMATION
23.85 min
19.6 max
17.3 max
8.35 min
12.95
min
MFP031
FOOTPRINT AREA
(mm 2)
19.5
44.3
375
2013 Jul 31
529
Ferroxcube
ER32/6/25
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
+0 halfpage
handbook,
2.9
VALUE
(I/A)
0.270
mm1
Ve
effective volume
5400
mm3
Ie
effective length
38.2
mm
Ae
effective area
141
mm2
Amin
minimum area
121
mm2
16
6.0
0.127
0.25
UNIT
32.1
+0.55
0.45
27.2 0.4
12.4 0.15
25.4
0.4
MFP075
R1.0 (4)
Dimensions in mm.
GRADE
AIR GAP
(m)
TYPE NUMBER
3C92
5700 25 %
1220
ER32/6/25-3C92-S
3C93
6600 25 %
1420
ER32/6/25-3C93-S
3C95
9640 25 %
2080
ER32/6/25-3C95-S
3C96
7160 25 %
1540
ER32/6/25-3C96-S
3F3
7160 25 %
1540
ER32/6/25-3F3-S
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
3C92
370
0.45
3.0
3C93
320
0.45(1)
3.0(1)
3C95
320
3.5
3.33
3C96
340
0.3
2.2
1.9
3F3
300
0.65
1.0
1.
Measured at 140 C.
2013 Jul 31
530
Ferroxcube
ER32/6/25
MOUNTING INFORMATION
32.85 min
26.6 max
12.7 min
26.0
min
MFP081
FOOTPRINT AREA
(mm 2)
41.1
62.2
828
2013 Jul 31
531
Ferroxcube
ER41/7.6/32
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.253
mm1
Ve
effective volume
12900
mm3
Ie
effective length
57.0
mm
Ae
effective area
225
mm2
Amin
minimum area
201
mm2
37
3.6
7.6
0.1 0.1
3.8 min
16
0.3
2 + 0.3
0
R1.0 (8x)
5
R0.8 (2x)
32
0.6
Section A-A
34.04 0.7
MFP183
40.64 0.8
Dimensions in mm.
GRADE
AIR GAP
(m)
TYPE NUMBER
3C92
6500 25 %
1310
ER41/7.6/32-3C92
3C93
7500 25 %
1510
ER41/7.6/32-3C93
3C95
11120 25 %
2240
ER41/7.6/32-3C95
3C96
8100 25 %
1630
ER41/7.6/32-3C96
3F3
8100 25 %
1630
ER41/7.6/32-3F3
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
3C92
370
1.3
7.8
3C93
320
1.3 (1)
7.8 (1)
3C95
320
8.94
8.51
3C96
340
0.92
5.88
5.58
3F3
300
1.7
2.5
1.
Measured at 140 C.
2013 Jul 31
532
Ferroxcube
ER41/7.6/32
MOUNTING INFORMATION
41.65 min
33.15 max
16.45 min
32.8
min
MFP184
FOOTPRINT AREA
(mm 2)
64.9
78.6
1316
2013 Jul 31
533
Ferroxcube
ER51/10/38
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.209
mm1
Ve
effective volume
25800
mm3
Ie
effective length
73.5
mm
Ae
effective area
351
mm2
Amin
minimum area
314
mm2
74.7
4.95
0.15
10.16
0.15
20
0.4
3 + 0.3
0
R2.0 (8x)
5
R1.0
(2x)
38.1
0.7
A
41.8 0.8
Section A-A
4.4 min (2x)
51 1.0
MFP219
Dimensions in mm.
GRADE
AIR GAP
(m)
TYPE NUMBER
3C92
8100 25 %
1350
ER51/10/38-3C92
3C93
9400 25 %
1570
ER51/10/38-3C93
3C95
14230 25 %
2370
ER51/10/38-3C95
3C96
10200 25 %
1700
ER51/10/38-3C96
3F3
10200 25 %
1700
ER51/10/38-3F3
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
3C92
370
2.5
15.2
3C93
320
2.5 (1)
15.2 (1)
3C95
320
17.9
17
3C96
340
1.68
11.2
10.5
3F3
300
3.2
5.0
1.
Measured at 140 C.
2013 Jul 31
534
Ferroxcube
ER51/10/38
MOUNTING INFORMATION
52.2 min
40.8 max
20.6 min
40.0
min
MFP220
FOOTPRINT AREA
(mm 2)
108
97.1
1986
2013 Jul 31
535
Ferroxcube
ER64/13/51
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.164
mm1
Ve
effective volume
52600
mm3
Ie
effective length
93.0
mm
Ae
effective area
566
mm2
Amin
minimum area
507
mm2
152
6.25
0.25
12.7
0.2
25.4
0.5
3 + 0.3
0
R2.0 (8x)
5
R1.0
(2x)
50.8
1.0
A
53.5 1.0
Section A-A
5.0 min (2x)
64 1.0
MFP221
Dimensions in mm.
GRADE
AIR GAP
(m)
TYPE NUMBER
3C92
10600 25 %
1390
ER64/13/51-3C92
3C93
12300 25 %
1610
ER64/13/51-3C93
3C95
18920 25 %
2475
ER64/13/51-3C95
3C96
13400 25 %
1760
ER64/13/51-3C96
3F3
13400 25 %
1760
ER64/13/51-3F3
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
3C92
370
5.3
32.4
3C93
320
5.3 (1)
32.4 (1)
3C95
320
36.5
34.7
3C96
340
3.71
24
22.7
3F3
300
6.3
10.2
1.
Measured at 140 C.
2013 Jul 31
536
Ferroxcube
ER64/13/51
MOUNTING INFORMATION
65.2 min
52.3 max
26.1 min
52.0
min
MFP222
FOOTPRINT AREA
(mm 2)
176
124
3282
2013 Jul 31
537
Ferroxcube
Soft Ferrites
CBW317
2013 Jul 31
538
Ferroxcube
Soft Ferrites
Ve
(mm 3)
Ae
(mm2)
MASS
(g)
ETD29/16/10 5470
76.0
14
ETD34/17/11 7640
97.1
20
special version
ETD39/20/13 11500
125
30
ETD44/22/15 17800
173
47
ETD49/25/16 24000
211
62
ETD54/28/19 35500
280
90
ETD59/31/22 51500
368
130
gap type:
A unsymmetrical gap to AL value
E symmetrical gap to AL value
G mechanical gap
core material
core size
core type
CBW099
C P H ETD29 1S 13P X
special version
number and type of pins:
D dual termination
F flat
L long
number of sections
associated core type
mounting orientation: H horizontal
V vertical
plastic material type: P thermoplastic
S thermoset
coil former (bobbin)
CBW100
2013 Jul 31
539
Ferroxcube
ETD29/16/10
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.947
mm1
Ve
effective volume
5470
mm3
Ie
effective length
72.0
mm
Ae
effective area
76.0
mm2
Amin
minimum area
71.0
mm2
14
handbook, halfpage
11
0.3
15.8
0.2
0
30.6 1.6
22 1.4
0
0
9.8 0.6
0
9.8 0.6
MGC259
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
2350 25%
1770
ETD29/16/10-3C90
3C94
2350 25%
1770
ETD29/16/10-3C94
3C95
2860 25%
21 60
ETD29/16/10-3C95
3C96
2200 25%
1660
ETD29/16/10-3C96
3F3
2200 25%
1660
ETD29/16/10-3F3
3F35
1600 25%
1210
ETD29/16/10-3F35
2013 Jul 31
540
Ferroxcube
ETD29/16/10
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
3C90
330
0.66
0.69
3C94
330
0.5
3C95
330
3C96
340
3F3
320
3F35
300
GRADE
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3.0
3.23
3.06
0.37
2.4
0.65
1.1
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C90
330
3C94
330
3C95
330
3C96
340
2.0
3F3
320
3F35
300
0.74
5.7
GRADE
2013 Jul 31
541
Ferroxcube
ETD29/16/10
COIL FORMER
General data 13-pins ETD29/16/10 coil former
PARAMETER
SPECIFICATION
Pin material
Solderability
35.2 max.
35.2 max.
0
21.8 0.2
handbook, full pagewidth
0
21.2 0.25
+0.3
10 0
19.4 min.
0
11.8 0.25
25.4
max.
3.4
5.08
1.6 +0.15
0
0.7
5.08
CBW281
25.4
30.48
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
95
19.4
53
7220
2013 Jul 31
542
TYPE NUMBER
CPH-ETD29-1S-13P
Ferroxcube
ETD29/16/10
MOUNTING PARTS
General data
ITEM
REMARKS
Mounting clip
FIGURE
handbook, halfpage8.0
18
33.6 min.
CBW589
Dimensions in mm.
0.4
8.7
2013 Jul 31
543
TYPE NUMBER
CLI-ETD29
Ferroxcube
ETD34/17/11
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
handbook, halfpage
UNIT
(I/A)
0.810
mm1
Ve
effective volume
7640
mm3
Ie
effective length
78.6
mm
Ae
effective area
97.1
mm2
Amin
minimum area
91.6
mm2
20
0.6
11.8 0
17.3
0.2
0
35 1.6
1.4
25.6 0
0
11.1 0.6
0
11.1 0.6
MGC176
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
2700 25%
1740
3C94
2700 25%
1740
ETD34/17/11-3C94
3C95
3270 25%
2110
ETD34/17/11-3C95
ETD34/17/11-3C90
3C96
2500 25%
1610
ETD34/17/11-3C96
3F3
2500 25%
1610
ETD34/17/11-3F3
3F35
1850 25%
1190
ETD34/17/11-3F35
2013 Jul 31
544
Ferroxcube
ETD34/17/11
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
3C90
330
0.92
0.97
3C94
330
0.73
3C95
330
3C96
340
3F3
320
3F35
300
GRADE
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
4.2
4.51
4.28
0.55
3.4
0.9
1.6
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C90
330
3C94
330
3C95
330
3C96
340
2.8
3F3
320
3F35
300
1.0
8.0
GRADE
2013 Jul 31
545
Ferroxcube
ETD34/17/11
COIL FORMERS
General data 14-pins ETD34/17/11 coil former
PARAMETER
Coil former material
SPECIFICATION
polybutyleneterephtalate (PBT), glass-reinforced, flame retardant
in accordance with UL 94V-0 ; UL file number E45329(R)
Pin material
Solderability
39.6 max.
42.8 max.
35.3 min.
0
25.4 0.2
handbook, full pagewidth
23.4
11.4 +0.1
0
0
0.2
20.9 min.
5.08
13.4 0
0.2
32.9
max.
1.6 +0.15
0
5.08
0.8
CBW280
5.08
25.4
30.48
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
123
20.9
60
11900
Note
1. Also available with 1.0 mm pins.
2013 Jul 31
546
TYPE NUMBER
CPH-ETD34-1S-14P(1)
Ferroxcube
ETD34/17/11
SPECIFICATION
Pin material
Solderability
39.8 max
0
25.4 0.2
0.2
11.4 0
32.6 max
0
21.15 0.1
(17.05 min)
0.15
O13.1 0
4.5
O1
5.08
30.48
2.7
42.9 max
0
21.7 0.15
(18.85 min)
39.8 max
0
25.4 0.2
0.2
11.4 0
MGC178
0.15 O 20.15
O18.4 0
0.1
32.6
max
MGC179
4.5
5.08
O1
22.7
30.48
Dimensions in mm.
For mounting grid and method of fitting, see Fig.4.
2013 Jul 31
547
Ferroxcube
ETD34/17/11
5.08
0.1
CSCI-ETD34-1S-7P
14
CSCO-ETD34-1S-7P
PH
ETD34
1.6
+0.15
0
CBW590
Dimensions in mm.
This coil former incorporates 8 mm creepage distance between primary and secondary windings, as
well as between primary and all other conductive parts (in accordance with IEC 380 safety regulations).
Winding data and area product for coaxial ETD34/17/11 coil former
NUMBER OF
SECTIONS
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
42.6
17.05
49.4
4140
CSCI-ETD34-1S-7P
46.6
18.85
71.4
4520
CSCO-ETD34-1S-7P
2013 Jul 31
548
Ferroxcube
ETD34/17/11
MOUNTING PARTS
General data
ITEM
REMARKS
Mounting clip
FIGURE
handbook, halfpage9
22
37.8 min
MGC181
0.4
11
Dimensions in mm.
2013 Jul 31
549
TYPE NUMBER
CLI-ETD34
Ferroxcube
ETD39/20/13
CORE SETS
Effective core parameters
handbook, halfpage
SYMBOL
PARAMETER
VALUE
14.2 0.8
0
UNIT
(I/A)
0.737
mm1
Ve
effective volume
11500
mm3
Ie
effective length
92.2
mm
Ae
effective area
125
mm2
Amin
minimum area
123
mm2
30
19.8
0.2
0
40 1.8
29.3 1.6
0
0
12.8 0.6
0
12.8 0.6
MGC262
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
3000 25%
1760
3C94
3000 25%
1760
ETD39/20/13-3C94
3C95
3650 25%
2145
ETD39/20/13-3C95
3F3
2800 25%
1640
ETD39/20/13-3F3
ETD39/20/13-3C90
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C90
330
1.4
1.5
3C94
330
1.2
6.0
3C95
330
7.25
6.9
3F3
320
1.4
2.5
2013 Jul 31
550
Ferroxcube
ETD39/20/13
COIL FORMER
General data 16-pins ETD39/20/13 coil former
PARAMETER
Coil former material
SPECIFICATION
polybutyleneterephtalate (PBT), glass-reinforced, flame retardant
in accordance with UL 94V-0 ; UL file number E45329(R)
Pin material
Solderability
44.6 max.
47.8 max.
40.3 min.
0
29.1 0.2
0
28.2 0.2
13.1 +0.1
0
25.7 min.
5.08
0
15.1 0.2
36.1
max.
1.6 +0.15
0
CBW279
5.08
0.8
5.08
35.56
30.48
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
177
25.7
69
22100
Note
1. Also available with 1.0 mm pins.
2013 Jul 31
551
TYPE NUMBER
CPH-ETD39-1S-16P(1)
Ferroxcube
ETD39/20/13
MOUNTING PARTS
General data
ITEM
REMARKS
Mounting clip
FIGURE
9
handbook, halfpage
42.8
min.
27
CBW591
0.4
12.6
Dimensions in mm.
2013 Jul 31
552
TYPE NUMBER
CLI-ETD39
Ferroxcube
ETD44/22/15
CORE SETS
Effective core parameters
handbook, halfpage
SYMBOL
PARAMETER
VALUE
16.1 0.8
0
UNIT
(I/A)
0.589
mm1
Ve
effective volume
17800
mm3
Ie
effective length
103
mm
Ae
effective area
173
mm2
Amin
minimum area
172
mm2
47
22.3
0.2
0
45 2
32.5 1.6
0
0
15.2 0.6
0
15.2 0.6
MGC266
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
3800 25%
1800
ETD44/22/15-3C90
3C94
3800 25%
1800
ETD44/22/15-3C94
3C95
4640 25%
2200
ETD44/22/15-3C95
3F3
3500 25%
1660
ETD44/22/15-3F3
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 400 kHz;
= 50 mT;
B
3C90
330
2.2
2.3
3C94
330
1.7
9.4
3C95
330
11.2
10.7
3F3
320
2.2
3.9
GRADE
2013 Jul 31
T = 100 C
553
T = 25 C
T = 100 C
T = 100 C
Ferroxcube
ETD44/22/15
COIL FORMERS
General data 18-pins ETD44/22/15 coil former
PARAMETER
SPECIFICATION
Pin material
Solderability
49.6 max.
52.2 max.
45.3 min.
0
32.3 0.2
0
32 0.3
15.5 +0.3
0
29.5 min.
5.08
0
17.5 0.2
38.1
max.
1.6 +0.15
0
4
5.08
5.08
CBW278
0.8
40.64
35.56
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
214
29.5
77
37000
Note
1. Also available with 1.0 mm pins.
2013 Jul 31
554
TYPE NUMBER
CPH-ETD44-1S-18P(1)
Ferroxcube
ETD44/22/15
MOUNTING PARTS
General data
ITEM
REMARKS
Mounting clip
FIGURE
10
handbook, halfpage
47.8
min.
28
CBW592
0.4
15
Dimensions in mm.
2013 Jul 31
555
TYPE NUMBER
CLI-ETD44
Ferroxcube
ETD49/25/16
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
handbook, halfpage
VALUE
17.7 0.8
0
UNIT
(I/A)
0.534
mm1
Ve
effective volume
24000
mm3
Ie
effective length
114
mm
Ae
effective area
211
mm2
Amin
minimum area
209
mm2
62
24.7
0.2
0
49.8 2.2
36.1 1.8
0
0
16.7 0.6
0
16.7 0.6
MGC270
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
4200 25%
1810
ETD49/25/16-3C90
3C94
4200 25%
1810
ETD49/25/16-3C94
3C95
5140 25%
2210
ETD49/25/16-3C95
3F3
3900 25%
1680
ETD49/25/16-3F3
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C90
330
3C94
330
3C95
3F3
GRADE
2013 Jul 31
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
2.9
3.1
2.3
12.4
330
15.1
14.4
320
3.0
5.4
556
Ferroxcube
ETD49/25/16
COIL FORMERS
General data 20-pins ETD49/25/16 coil former
PARAMETER
Coil former material
SPECIFICATION
polybutyleneterephtalate (PBT), glass-reinforced, flame retardant
in accordance with UL 94V-0 ; UL file number E45329(R)
Pin material
Solderability
54.5 max.
57.2 max.
50.1 min.
35.9 0
0.2
+0.3
17 0
35.2 0
0.3
32.7 min.
5.08
0
19.2 0.3
40.6
max.
1.6 +0.15
0
4
5.08
5.08
CBW277
0.8
45.72
40.64
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
273
32.7
85
57600
Note
1. Also available with 1.0 mm pins.
2013 Jul 31
557
TYPE NUMBER
CPH-ETD49-1S-20P(1)
Ferroxcube
ETD49/25/16
MOUNTING PARTS
General data
ITEM
REMARKS
Mounting clip
FIGURE
10.8
handbook, halfpage
53.3
min.
33.5
CBW593
0.4
16.5
Dimensions in mm.
2013 Jul 31
558
TYPE NUMBER
CLI-ETD49
Ferroxcube
ETD54/28/19
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
handbook, halfpage
20.2
0.4
(I/A)
0.454
mm1
Ve
effective volume
35500
mm3
Ie
effective length
127
mm
Ae
effective area
280
mm2
Amin
minimum area
270
mm2
54.5 1.3
90
41.2 1.1
27.6
0.2
18.9 0.4
18.9
0.4
MGC274
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
5000 25%
1810
ETD54/28/19-3C90
3C94
5000 25%
1810
ETD54/28/19-3C94
3C95
6120 25%
2210
ETD54/28/19-3C95
3F3
4600 25%
1660
ETD54/28/19-3F3
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 400 kHz;
= 50 mT;
B
3C90
330
4.3
4.8
3C94
330
3.6
21
3C95
330
22.4
21.3
3F3
320
4.5
8.5
GRADE
2013 Jul 31
T = 100 C
559
T = 25 C
T = 100 C
T = 100 C
Ferroxcube
ETD54/28/19
COIL FORMERS
General data 22-pins ETD54/28/19 coil former
ITEM
SPECIFICATION
Pin material
Solderability
61.5 max.
39.5 0
0.35
5.08
61.4 max.
39.3 0
0.3
36.8 min.
19.8 +0.25
0
3.4
21.9
46.35
max.
+0.15
0
0
0.4
4.5
5.08
CBW101
1
55.88
1.6 +0.15
0
45.72
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
316
36.8
96
88500
2013 Jul 31
560
TYPE NUMBER
CPH-ETD54-1S-22P
Ferroxcube
ETD54/28/19
MOUNTING PARTS
General data
ITEM
REMARKS
Mounting clip
FIGURE
11.7
handbook, halfpage
19.3
6.8
42
CBW594
59.7
min.
0.4
Dimensions in mm.
2013 Jul 31
561
TYPE NUMBER
CLI-ETD54
Ferroxcube
ETD59/31/22
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
handbook, halfpage
22.5
0.4
(I/A)
0.378
mm1
Ve
effective volume
51500
mm3
Ie
effective length
139
mm
Ae
effective area
368
mm2
Amin
minimum area
360
mm2
59.8 1.3
44.7 1.1
130
31.0
0.2
21.65 0.45
21.65
0.45
MGC275
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
6000 25%
1800
ETD59/31/22-3C90
3C94
6000 25%
1800
ETD59/31/22-3C94
3C95
7340 25%
2205
ETD59/31/22-3C95
3F3
5600 25%
1680
ETD59/31/22-3F3
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 400 kHz;
= 50 mT;
B
3C90
330
6.2
7.3
3C94
330
5.2
31
3C95
330
32.4
30.9
3F3
320
6.7
12.8
GRADE
2013 Jul 31
T = 100 C
562
T = 25 C
T = 100 C
T = 100 C
Ferroxcube
ETD59/31/22
COIL FORMER
General data 24-pins ETD59/31/22 coil former
PARAMETER
SPECIFICATION
Pin material
Solderability
66.9 max.
43 0
0.35
5.08
66.4 max.
0
43.7
0.35
41.2 min.
22.4 +0.25
0
3.4
+0.15
0
24.75 0
0.3
49.4
max.
4.5
5.08
CBW102
1
60.96
1.6 +0.15
0
50.8
Dimensions in mm.
WINDING
AREA
(mm 2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
366
41.2
106
135000
2013 Jul 31
563
TYPE NUMBER
CPH-ETD59-1S-24P
Ferroxcube
ETD59/31/22
MOUNTING PARTS
General data
ITEM
REMARKS
Mounting clip
FIGURE
12.9
handbook, halfpage
22.1
45
CBW595
65.2
min.
0.4
Dimensions in mm.
2013 Jul 31
564
TYPE NUMBER
CLI-ETD59
Ferroxcube
Soft Ferrites
2013 Jul 31
565
Ferroxcube
Soft Ferrites
CBW596
2013 Jul 31
566
Ferroxcube
Soft Ferrites
Ve
(mm3)
Ae
MASS
(mm2)
(g)
FRM 20/5/15
655
14
2.1
BAR 20/3/5.5
655
14
1.5
FRM 21/4/12
312
7.9
1.5
BAR 22/2/6
312
7.9
1.0
FRM 24/3.9/10
370
8.1
1.3
BAR 25/2.2/4
370
8.1
1.2
FRM 27/3.8/9
504
9.7
1.6
9.7
1.2
core material
core size
core type
CBW597
core material
core size
core type
MFP038
C P H S FRM27/9 6S 8P
number and type of pins
number of sections
associated core type
mounting type: S - surface mount
mounting orientation: H horizontal
V vertical
plastic material type: P thermoplastic
S thermoset
coil former (bobbin)
CBW598
2013 Jul 31
567
Ferroxcube
FRM20/5/15
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
3.29
mm1
Ve
effective volume
655
mm3
Ie
effective length
46
mm
Ae
effective area
14
mm2
Amin
minimum area
7.4
mm2
mass of frame
2.1
mass of bar
1.5
1.8
0.1
4.6
0.1
11.4
0.25
7.0
0.1
14.8
0.3
CBW567
15.6 0.3
19.7 0.3
Dimensions in mm.
Fig.1 FRM20/5/15.
Ordering information for bar cores
GRADE
TYPE NUMBER
3C90
BAR20/3/5.5-3C90
3C91
BAR20/3/5.5-3C91
19.9 0.3
handbook, halfpage
5.45
0.15
2.85 0.05
CBW539
Dimensions in mm.
Fig.2 BAR20/3/5.5.
2013 Jul 31
568
Ferroxcube
FRM20/5/15
AL
(nH)
3C90
500 25%
1310
FRM20/5/15-3C90
3C91
600 25%
1570
FRM20/5/15-3C91
GRADE
TYPE NUMBER
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
T = 100 C
T = 60 C
T = 60 C
3C90
320
0.073
0.080
3C91
320
0.033
0.26
GRADE
2013 Jul 31
569
Ferroxcube
FRM20/5/15
COIL FORMERS
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
10.2 0.1
14.3 0.1
6.7 0.1
5.6 0.1
1.4
2.9 4.0
0.1 0.1
6.8
0.1
0.4
0.1 0.1
21.9 0.15
0.7
24.0 0.2
2.52
20.0 0.1
1.1 (7x)
14.2
0.1
0.6
0.38 (6x)
CBW548
Dimensions in mm.
NUMBER
OF
SOLDER
PADS
WINDING
AREA
(mm 2)
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
10
3.5 + 7 1.5
2.52 + 7 1.1
27
2013 Jul 31
570
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
Ferroxcube
FRM20/5/15
MOUNTING PARTS
General data
PARAMETER
SPECIFICATION
Cover material
7.2
23.0
3.0
15.3 max
5.74
11.1 15.1
20.0
Dimensions in mm.
2013 Jul 31
571
CBW555
Ferroxcube
FRM21/4/12
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
5.06
mm1
Ve
effective volume
312
mm3
Ie
effective length
40
mm
Ae
effective area
7.9
mm2
Amin
minimum area
5.7
mm2
mass of frame
1.5
mass of bar
1.0
0.5
max.
handbook, halfpage
3.5
0.1
1.2
0.1
8.9 11.8
0.2 0.25
7.0
0.1
CBW566
16.2 0.3
21 0.2
Dimensions in mm.
Fig.1 FRM21/4/12.
Ordering information for bar cores
GRADE
TYPE NUMBER
3C90
BAR22/2/6-3C90
3C91
BAR22/2/6-3C91
21.8 0.3
handbook, halfpage
5.5
0.2
1.8 0.1
CBW538
Dimensions in mm.
Fig.2 BAR22/2/6.
2013 Jul 31
572
Ferroxcube
FRM21/4/12
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
400 25%
1610
FRM21/4/12-3C90
3C91
470 25%
1890
FRM21/4/12-3C91
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
T = 100 C
T = 60 C
T = 60 C
3C90
320
0.034
0.037
3C91
320
0.020
0.14
GRADE
2013 Jul 31
573
Ferroxcube
FRM21/4/12
COIL FORMERS
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
8.2
15.9
5.75
0.7
1.3
handbook, full pagewidth
2.75
4.6
0.4
27.7 0.2
CBW547
29.15 0.2
24.7 0.15
0.55
1.5 (x6)
2.6
11.7
0.4
0.38 (x5)
Dimensions in mm.
NUMBER
OF
SOLDER
PADS
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
2.3 + 6 1.35
2.6 + 6 1.5
21
2013 Jul 31
574
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
Ferroxcube
FRM24/3.9/10
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
5.65
mm1
Ve
effective volume
370
mm3
Ie
effective length
45.8
mm
Ae
effective area
8.1
mm2
Amin
minimum area
6.0
mm2
mass of frame
1.3
mass of bar
1.2
0.5
max.
handbook, halfpage
3.85
0.1
1.3
0.05
7.3 9.8
0.2 0.2
5.7
0.1
CBW565
19.2 0.3
23.8 0.3
Dimensions in mm.
TYPE NUMBER
3C90
BAR25/2.2/4-3C90
3C91
BAR25/2.2/4-3C91
24.7 0.3
handbook, halfpage
4.4 0.2
2.15 0.05
CBW537
Dimensions in mm.
Fig.2 BAR25/2.2/4.
2013 Jul 31
575
Ferroxcube
FRM24/3.9/10
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
370 25%
1660
FRM24/3.9/10-3C90
3C91
440 25%
1970
FRM24/3.9/10-3C91
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
3C90
320
0.041
0.044
3C91
320
0.019
0.15
GRADE
2013 Jul 31
576
f = 100 kHz;
= 100 mT;
B
T = 60 C
f = 100 kHz;
= 200 mT;
B
T = 60 C
Ferroxcube
FRM24/3.9/10
COIL FORMERS
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
6.8
18.8
1.15
5.25
0.48
4.6
handbook, full pagewidth
0.3
4.3
2.2
2.75
30.05 0.15
31.9 0.15
CBW546
27.95 0.15
3.7
1.6 (7)
8.1
0.5
0.4
0.3 (6)
0.5
9.7
1.6
6.1
4.8
Dimensions in mm.
NUMBER
OF
SOLDER
PADS
WINDING
AREA
(mm 2)
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
2.9 + 7 1.24
3.7 + 7 1.6
17.3
2013 Jul 31
577
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
Ferroxcube
FRM27/3.8/9
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
5.56
mm1
Ve
effective volume
504
mm3
Ie
effective length
52.1
mm
Ae
effective area
9.7
mm2
Amin
minimum area
8.7
mm2
mass of frame
1.6
mass of bar
1.2
1.3
0.1
handbook, halfpage
3.8 0.2
5.0
0.1
6.5
0.2
9.0
0.3
CBW564
19.7 0.6
26.7 0.7
Dimensions in mm.
TYPE NUMBER
3C90
BAR28/2.3/3.8-3C90
3C91
BAR28/2.3/3.8-3C91
28 0.5
2.3 0.1
handbook, halfpage
3.8 0.1
CBW536
Dimensions in mm.
Fig.2 BAR28/2.3/3.8
2013 Jul 31
578
Ferroxcube
FRM27/3.8/9
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
350 20%
1550
FRM27/3.8/9-3C90
3C91
420 20%
1860
FRM27/3.8/9-3C91
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
T = 100 C
T = 60 C
T = 60 C
3C90
320
0.056
0.060
3C91
320
0.025
0.2
GRADE
2013 Jul 31
579
Ferroxcube
FRM27/3.8/9
COIL FORMERS
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
0.9
27.3 min.
9.2 0.1
19.2 max.
4.0
4.75
0.1
3.0
25
2.5 3.2
5.35
0.4
0.7
29.9
CBW545
35.0 0.25
36.0 0.25
32.5 0.15
0.4
0.5
+0.05
0
9.2 0.1
2.7
1.6
2.6 (5)
Dimensions in mm.
NUMBER
OF
SOLDER
PADS
2013 Jul 31
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
580
AVERAGE
LENGTH OF
TURN
(mm)
18.5
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
Ferroxcube
Soft Ferrites
2013 Jul 31
581
Ferroxcube
Soft Ferrites
CBW630
2013 Jul 31
582
Ferroxcube
Soft Ferrites
Ve
(mm3)
Ae
(mm2)
MASS
(g)
IIC2P-14/4
33.8
11.7
1.85
IIC10-14/4
33.8
11.7
1.85
IIC10P-14/4
33.8
11.7
1.85
IIC10G-14/4
33.8
11.7
1.85
CBW631
2013 Jul 31
583
Ferroxcube
IIC2-14/4
IIC2P-14/4
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
2.47
mm1
Ve
effective volume
338
mm3
Ie
effective length
28.9
mm
Ae
effective area
11.7
mm2
mass of core
1.85
14.4 0.2
0.75
0.75
4.8
max.
4
0.08
0.8
max.
2 2
0.3
1.87
min.
FEATURES
0.75 0.2
0.1
3
max. 12.5
max.
7.2
0.15
detail A
0.51
identification :
Ikor
Ferroxcube
Batch number
APPLICATIONS
Coupled inductor
3.81
min.
(1)
3.18
0.4
Dimensions in mm.
GRADE
f = 500 kHz;
T = 25 C
f = 1 MHz;
T = 25 C
2.8 25 %
3F35
TYPE NUMBER
IIC2P-14/4-3F35-E
3F35
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
40
TYPE NUMBER
IIC2P-14/4-3F35-E
(1) The technology utilized in conjunction with the coupled inductor ("the CL") described in this data sheet includes
intellectual property (the "IP") owned by iWatt, Inc. and is covered by one or more of the following U.S. patents :
6,545,450 ; 6,686,727 ; 6,696,823. In connection with the end customer's purchase of the CL from "Ferroxcube USA",
the end customer is hereby granted a non-exclusive, worldwide, royalty-free license (without rights to sublicense) to use
and incorporate the IP in the end customer's product that also incorporates the CL. In no way does this license extend
to customer end products which do not incorporate the CL to implement the IP.
2013 Jul 31
584
Ferroxcube
GENERAL DATA
ITEM
IIC2-14/4
SPECIFICATION
2 windings of 1 turn :
70 nH
Leadframe
material
Moulding
material
Solderability
Taping
method
20 A
R dc
110 per turn at 10 A
Isolation voltage
> 500 V (DC) between leads and between leads and ferrite
core.
Isolation resistance
>100 M between leads.
2013 Jul 31
585
Ferroxcube
IIC2-14/4
MOUNTING
Soldering information
300
soldering 10 s max.
CCB814
215 to 280 C
natural cooling
200
180 C
160 C
max.
100
=
10 K/s
max.
60 s min.
1 minute max.
t (s)
1.4
1.1
7.1
10.2
13.0
MFP187
solder paste
solder lands
clearance
2013 Jul 31
586
Ferroxcube
IIC2-14/4
PACKAGING
Tape and reel specifications
All tape and reel specifications are in accordance with the second edition of IEC 60286-3. Basic dimensions are given
in Figs 4 and 5, and Table 1.
Blister tape
P0
K0
D0
P2
cover tape
W
B0
D3
D2
MFP186
A0
D1
P1
direction of unreeling
TOL.
UNIT
A0
SYMBOL
12.65
0.1
mm
B0
K0
14.75
4.85
0.1
0.1
mm
mm
K1
4.27
0.1
mm
W
D0
24
1.55
0.3
0.05
mm
mm
D1
D2
1.5
3
0.25
mm
mm
D3
P0; note 1
6.85
4
0.1
mm
mm
P1
16
0.1
mm
P2
T
2
0.35
0.1
0.1
mm
mm
Note
1. P0 pitch tolerance over any 10 pitches is 0.2 mm.
2013 Jul 31
587
Ferroxcube
IIC2-14/4
Reel specifications
12.75 +0.15
0
20.5
100
5
330
2
CCB816
<28.4
Dimensions in mm.
Fig.5 Reel.
Storage requirements
These storage requirements should be observed in order to ensure the soldering of the exposed electrode:
Maximum ambient temperature shall not exceed 40 C. Storage temperature higher than 40 C could result in the
deformation of packaging materials.
Maximum relative humidity recommended for storage is 70% RH. High humidity with high temperature can accelerate
the oxidation of the tin-lead plating on the termination and reduce the solderability of the components.
Products shall not bestored in environments with the presence of harmful gases containing sulfur or chlorine.
2013 Jul 31
588
Ferroxcube
IIC10-14/4
IIC10P-14/4
Effective core parameters
SYMBOL
14.4 0.2
PARAMETER
VALUE
(I/A)
2.47
mm1
Ve
effective volume
338
mm3
Ie
effective length
28.9
mm
Ae
effective area
11.7
mm2
1.85
0.75
0.75
UNIT
handbook, halfpage
4.38
max.
4
0.08
0.3
max.
0.3
2.7
0.2
0.1
FEATURES
Inductive SMD component that looks like a standard IC.
7.2
0.15
10.45
max.
CBW368
1.0
0.6 max.
APPLICATIONS
Dimensions in mm.
Power inductor
Output choke
GRADE
3C30
3F4
3F35
70 25%
f = 1 MHz;
T = 25 C
45 25%
f = 1 MHz;
T = 25 C
TYPE NUMBER
IIC10P-14/4-3C30
IIC10P-14/4-3F4
IIC10P-14/4-3F35
3C30
3F4
3F35
2013 Jul 31
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
30
40
70
589
TYPE NUMBER
IIC10P-14/4-3C30
IIC10P-14/4-3F4
IIC10P-14/4-3F35
Ferroxcube
IIC10-14/4
IIC10G-14/4
Effective core parameters
SYMBOL
14.4 0.2
PARAMETER
VALUE
(I/A)
2.47
mm1
Ve
effective volume
338
mm3
Ie
effective length
28.9
mm
Ae
effective area
11.7
mm2
1.85
0.75
0.75
UNIT
handbook, halfpage
4.38
max.
4
0.08
0.3
max.
0.3
2.7
0.2
0.1
FEATURES
Inductive SMD component that looks like a standard IC.
7.2
0.15
10.45
max.
MFP054
1.0
0.6 max.
MFP054
APPLICATIONS
Dimensions in mm.
Power inductor
Output choke
GRADE
3F35
3F4
f = 500 kHz;
T = 25 C
f = 1 MHz;
T = 25 C
f = 500 kHz;
T = 25 C
f = 1 MHz;
T = 25 C
8 15 %
7.5 15 %
5.5
TYPE NUMBER
IIC10G-14/4-3F35
IIC10G-14/4-3F4
3F35
3F4
2013 Jul 31
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
40
70
590
TYPE NUMBER
IIC10G-14/4-3F35
IIC10G-14/4-3F4
Ferroxcube
IIC10-14/4
IIC10-14/4
Effective core parameters
SYMBOL
(I/A)
Ve
Ie
Ae
m
14.4 0.2
PARAMETER
VALUE
2.47
338
28.9
11.7
1.85
0.75
0.75
UNIT
handbook, halfpage
mm1
4.38
max.
4
0.08
mm3
mm
mm2
g
0.3
max.
0.3
2.7
0.2
0.1
FEATURES
Inductive SMD component that looks like a standard IC.
Windings are completed by PCB tracks.
7.2
0.15
10.45
max.
APPLICATIONS
1.0
0.6 max.
Common-mode choke
Mutli-line choke
Dimensions in mm.
Power transformers
Fig.3 IIC10-14/4 outline.
Signal transformers
Saturable inductor.
IICs for use as transformer or common-mode chokes
AL (nH) at
GRADE
3F4
3E6
3F35
f = 10 kHz;
T = 25 C
f = 500 kHz;
T = 25 C
f = 1 MHz;
T = 25 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
6000 30%
700 25%
450 25%
40
f = 1 MHz;
= 30 mT;
B
T = 100 C
TYPE NUMBER
70
IIC10-14/4-3F4
IIC10-14/4-3E6
IIC10-14/4-3F35
TYPE NUMBER
35
3S4
IIC10-14/4-3S4
Note
1. Minimum value, Zmin is 20%.
IIC with rectangular hysteresis loop for use in magnetic regulators
Et product (V.s) at
GRADE
3R1
2013 Jul 31
TYPE NUMBER
33
12
IIC10-14/4-3R1
591
Ferroxcube
IIC10-14/4
Inter winding capacitance
SPECIFICATION
2 windings of 5 turns:
unifilar 5 pF
Leadframe
material
Moulding
material
Solderability
Leakage inductance
Taping
method
bifilar 10 pF.
2 windings of 5 turns:
unifilar 1.8 H
bifilar 0.2 H.
R dc
65 m (25 C) and 85 m (100 C) for 10 turns
including 20 solder joints (assuming 70 m Cu PCB
tracks).
Isolation voltage
ndbook, 4 columns
ndbook, 4 columns
CBW540
CBW541
2013 Jul 31
592
Ferroxcube
IIC10-14/4
MOUNTING
Soldering information
300
soldering 10 s max.
CCB814
215 to 280 C
natural cooling
200
180 C
160 C
max.
100
=
10 K/s
max.
60 s min.
1 minute max.
t (s)
1.4
1.1
1.0
0.9 0.6 0.5
8.15
10.95
CCB815
solder paste
solder lands
clearance
2013 Jul 31
593
Ferroxcube
IIC10-14/4
PACKAGING
Tape and reel specifications
All tape and reel specifications are in accordance with the second edition of IEC 60286-3. Basic dimensions are given
in Figs 8 and 9, and Table 1.
Blister tape
P0
K0
D0
P2
cover tape
W
B0
CCB842
A0
D1
P1
direction of unreeling
TOL.
UNIT
A0
SYMBOL
10.6
0.1
mm
B0
K0
14.75
4.75
0.1
0.1
mm
mm
24
0.3
mm
D0
D1
1.5
1.5
0.1
0.25
mm
mm
P0; note 1
P1
4
12
0.1
0.1
mm
mm
P2
T
6
0.3
0.1
0.1
mm
mm
Note
1. P0 pitch tolerance over any 10 pitches is 0.2 mm.
2013 Jul 31
594
Ferroxcube
IIC10-14/4
Reel specifications
12.75 +0.15
0
20.5
100
5
330
2
CCB816
<28.4
Dimensions in mm.
Fig.9 Reel.
Storage requirements
These storage requirements should be observed in order to ensure the soldering of the exposed electrode:
Maximum ambient temperature shall not exceed 40 C. Storage temperature higher than 40 C could result in the
deformation of packaging materials.
Maximum relative humidity recommended for storage is 70% RH. High humidity with high temperature can accelerate
the oxidation of the tin-lead plating on the termination and reduce the solderability of the components.
Products shall not bestored in environments with the presence of harmful gases containing sulfur or chlorine.
2013 Jul 31
595
Ferroxcube
Soft Ferrites
CBW608
2013 Jul 31
596
Ferroxcube
Soft Ferrites
Ve
(mm3)
Ae
(mm 2)
special version
MASS
(g)
P9/5
126
10.1
0.8
P11/7
251
16.2
1.8
P11/7/I
309
19.0
1.9
P14/8
495
25.1
3.2
P14/18/I
628
29.9
3.5
P18/11
1120
43.3
6.0
P18/11/I
1270
47.5
P22/13
2000
63.4
12
P22/13/I
2460
73.4
13
P26/16
3530
93.9
20
P26/16/I
4370
110
21
P30/19
6190
137
34
P36/22
10 700
202
54
P42/29
18 200
265
104
P66/56
88200
717
550
CBW103
C P V P14/8 1S 4SPDL
number and type of pins:
D dual termination
F flat
L long
SP slanted pin row
number of sections
associated core type
CBW104
C LM / T P P14/8 XX X
special version
number of pins
associated core/hardware
hardware type:
BPL baseplate
CLA clasp
CLI clip
CLM clamp
CON container
SPR spring
TGP tag plate
WAS washer
hardware shape:
D 'D' shaped
R round
T 'T' shaped
U 'U' shaped
mounting type/orientation:
C chassis-mount
H horizontal
P PCB-mount
S screw-mount
V vertical
CBW105
2013 Jul 31
597
Ferroxcube
P9/5
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
1.24
mm1
Ve
effective volume
126
mm3
Ie
effective length
12.5
mm
Ae
effective area
10.1
mm2
Amin
minimum area
7.9
mm2
mass of set
0.8
0.25
7.5 0
0
0
3.9 0.2 9.3 0.3
2
0.2
6.5 0.25
O 2.1 0.1
0
0.3
5.4 0.3
3.6 0
1.3
0.1
0.55
max
M1.4
MGC211
O 2.9
Dimensions in mm.
3H3
AL
(nH)
TYPE NUMBER
(WITH NUT)
TYPE NUMBER
(WITHOUT NUT)
40 3%
39
410
P9/5-3D3-E40/N
P9/5-3D3-E40
63 3%
62
230
P9/5-3D3-A63/N
P9/5-3D3-A63
630 25%
620
40 3%
39
430
62
250
1080
63 3%
1100 25%
P9/5-3D3
P9/5-3H3-E40/N
P9/5-3H3-E40
P9/5-3H3-A63/N
P9/5-3H3-A63
P9/5-3H3
AL
(nH)
1350 25%
1 200
P9/5-3C81
3C91
1350 25%
1200
P9/5-3C91
3F3
1100 25%
1080
P9/5-3F3
GRADE
3C81
2013 Jul 31
598
TYPE NUMBER
Ferroxcube
P9/5
AL
(nH)
AIR GAP
(m)
2300 25%
2020
TYPE NUMBER
P9/5-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 400 kHz;
= 50 mT;
B
T = 100 C
T = 100 C
T = 100 C
3C81
320
0.035
3C91
315
0.008(1)
0.06(1)
3F3
315
0.015
0.03
GRADE
Note
1. Measured at 60 C.
2013 Jul 31
599
Ferroxcube
P9/5
INDUCTANCE ADJUSTERS
General data
ITEM
handbook, halfpage
SPECIFICATION
Material of head
and thread
polypropylene (PP),
glass fibre reinforced
Maximum operating
temperature
125 C
O 2.13
0.07
0
6.2
2.55
M1.4
0.5
1.5
min
MGC212
Dimensions in mm.
L/L(1)
40
ADJ-P9/P11-YELLOW
63
AL
(nH)
Note
1. Maximum adjustment range.
2013 Jul 31
600
L/L(1)
11
18
ADJ-P9/P11-BROWN
31
Ferroxcube
P9/5
COIL FORMERS
General data for coil former CP-P9/5-1S
PARAMETER
SPECIFICATION
0
3.5 0.1
0
0
4.78 0.1 7.35 0.1
1.5
0.1
2.7 0
0.1
0
MGC213
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
3.1
2.5
18.9
31.3
2013 Jul 31
601
TYPE NUMBER
CP-P9/5-1S
Ferroxcube
P9/5
MOUNTING PARTS
General data
ITEM
REMARKS
Clamp
FIGURE
4
0.25
handbook, halfpage
8
0.25
9.75 0.25
6.15
0.25
4.4 0.5
0.25
10 0.25
1.4
0.25
MGB606
Dimensions in mm.
2013 Jul 31
602
TYPE NUMBER
CLM/TP-P9/5
Ferroxcube
P11/7
CORE SETS
6.8 0.25
PARAMETER
VALUE
UNIT
(I/A)
0.956
mm1
Ve
effective volume
251
mm3
Ie
effective length
15.5
mm
Ae
effective area
16.2
mm2
Amin
minimum area
13.2
mm2
mass of set
1.8
0.4
9 0
0
4.7 0.2
11.1
0.2
2.2
0.3
O 2.9
O 2.1 0.1
0.3
0.1
4.4 0 6.5 0.2
2
0.1
0.45 max
MGC150
M1.4
Dimensions in mm.
3H3
AL
(nH)
TYPE NUMBER
(WITH NUT)
TYPE NUMBER
(WITHOUT NUT)
16 3%
12
2210
P11/7-3D3-E16/N
P11/7-3D3-E16
25 3%
19
1280
P11/7-3D3-E25/N
P11/7-3D3-E25
40 3%
31
710
P11/7-3D3-E40/N
P11/7-3D3-E40
63 3%
48
400
P11/7-3D3-E63/N
P11/7-3D3-E63
P11/7-3D3-A100/N
P11/7-3D3-A100
100 3%
76
220
800 25%
610
160 3%
122
140
190
80
1260
250 3%
1650 25%
2013 Jul 31
603
P11/7-3D3
P11/7-3H3-A160/N
P11/7-3H3-A160
P11/7-3H3-A250/N
P11/7-3H3-A250
P11/7-3H3
Ferroxcube
P11/7
3C91
3F3
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
100 3%
76
240
160 3%
122
140
P11/7-3C81-A160
250 3%
190
85
P11/7-3C81-A250
2050 25%
1560
2050 25%
P11/7-3C81-A100
P11/7-3C81
1 560
100 3%
76
240
P11/7-3F3-A100
160 3%
122
140
P11/7-3F3-A160
250 5%
190
80
1 260
1 650 25%
P11/7-3C91
P11/7-3F3-A250
P11/7-3F3
AL
(nH)
AIR GAP
(m)
3400 25%
2600
TYPE NUMBER
P11/7-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 400 kHz;
= 50 mT;
B
T = 100 C
T = 100 C
T = 100 C
3C81
320
0.05
3C91
315
0.015(1)
0.12(1)
3F3
315
0.03
0.05
GRADE
Note
1. Measured at 60 C.
2013 Jul 31
604
Ferroxcube
P11/7
INDUCTANCE ADJUSTERS
General data
handbook, halfpage
PARAMETER
O 2.13
SPECIFICATION
Material of head
and thread
polypropylene (PP),
glass fibre reinforced
Maximum operating
temperature
125 C
0.07
0
6.2
2.55
M 1.4
1.5
min
0.5
MGC151
Dimensions in mm.
3D3
AL
(nH)
L/L(1)
100
ADJ-P9/P11-YELLOW
13
ADJ-P9/P11-BROWN
24
160 ADJ-P9/P11-YELLOW
ADJ-P9/P11-BROWN
15
ADJ-P9/P11-GREY
22
250 ADJ-P9/P11-BROWN
ADJ-P9/P11-GREY
14
16
ADJ-P9/P11-YELLOW
19
25
40
63
ADJ-P9/P11-YELLOW
18
100
ADJ-P9/P11-YELLOW
11
Note
1. Maximum adjustment range.
2013 Jul 31
605
ADJ-P9/P11-YELLOW
30
ADJ-P9/P11-YELLOW
24
Ferroxcube
P11/7
COIL FORMERS
General data CP-P11/7-1S coil former
PARAMETER
SPECIFICATION
0
4.2 0.1
0.3
0
5.7 0.1
1.8
4.8 +0.1
0
0
8.9 0.1
CBW599
0.4
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
4.8
3.1
22.6
77.8
2013 Jul 31
606
TYPE NUMBER
CP-P11/7-1S
Ferroxcube
P11/7
SPECIFICATION
105 C
4.8
min
4.2
max
8.9
5.65 max
1.6
min
MGB528
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
TYPE NUMBER
4.77
3.42
22.7
77.3
CP-P11/7-1S-A
2 2.00
2 1.52
22.7
2 x 32.4
CP-P11/7-2S-A
3 1.16
3 0.91
22.7
3 x 18.8
CP-P11/7-3S-A
2013 Jul 31
607
Ferroxcube
P11/7
MOUNTING PARTS
General data
ITEM
REMARKS
Tag plate
FIGURE
TYPE NUMBER
TGP-P11/7-C
CON-P11/7
SPR-P11/7
CLM/TP-P11/7
Spring
CrNi-steel
spring force: 35 N when mounted
Clamp
12.4 max
10.16
6.9
10.16
2.5
2.4
2.54
O 2.4
O 0.8
1.2
0.8
1.35
3.1
Dimensions in mm.
2013 Jul 31
608
0.15
0
MGC153
Ferroxcube
5.5
2
P11/7
3.4
3
2.2
mark
12.45 max.
10 min.
7.5 max.
12.45 max.
Dimensions in mm.
handbook, halfpage
0.2
0
10.8
max
MGC155
Dimensions in mm.
2013 Jul 31
609
CBW600
Ferroxcube
P11/7
7 0.25
handbook, halfpage
4
0.25
9.2
0.25
12.2 0.25
7.5
0.25
5 0.5
0.25
12.5 0.25
1.5
0.25
MGB607
Dimensions in mm.
2013 Jul 31
610
Ferroxcube
P11/7/I
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
(I/A)
0.860
mm1
Ve
effective volume
309
mm3
Ie
effective length
16.3
mm
Ae
effective area
19.0
mm2
Amin
minimum area
13.7
mm2
mass of set
1.9
6.8 0.25
handbook, halfpage
UNIT
9.2
0.2
4.6
2.2
0.1 0.3
11.1
0.2
4.45
6.6
+0.3/0 0.15
MGB569
Dimensions in mm.
3C91
3F3
2013 Jul 31
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
63 3%
43
500
P11/7/I-3C81-A63
100 3%
68
290
P11/7/I-3C81-A100
160 3%
109
170
P11/7/I-3C81-A160
250 5%
171
100
P11/7/I-3C81-A250
315 5%
215
75
2100 25%
1 430
P11/7/I-3C81
2100 25%
P11/7/I-3C91
P11/7/I-3C81-A315
1 430
63 3%
43
500
P11/7/I-3F3-A63
100 3%
68
290
P11/7/I-3F3-A100
160 3%
109
170
P11/7/I-3F3-A160
250 5%
171
100
P11/7/I-3F3-A250
315 5%
215
75
1750 25%
1195
611
P11/7/I-3F3-A315
P11/7/I-3F3
Ferroxcube
P11/7/I
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C81
320
0.07
3C91
315
0.016(1)
0.12(1)
3F3
315
0.04
0.06
Note
1. Measured at 60 C.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
4.8
3.1
22.6
91.2
TYPE NUMBER
CP-P11/7-1S
Winding data and area product (for P11/7/I) for CP-P11/7-A coil former
NUMBER OF
SECTIONS
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
TYPE NUMBER
4.77
3.42
22.7
90.6
CP-P11/7-1S-A
2 2.00
2 1.52
22.7
2 x 38.0
CP-P11/7-2S-A
3 1.16
3 0.91
22.7
3 x 22.0
CP-P11/7-3S-A
2013 Jul 31
612
Ferroxcube
P14/8
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
(I/A)
0.789
mm1
Ve
effective volume
495
mm3
Ie
effective length
19.8
mm
Ae
effective area
25.1
mm2
Amin
minimum area
19.8
mm2
mass of set
3.2
9.5
handbook, halfpage
UNIT
0.3
0.4
11.6 0
0
0
6 0.2 14.3 0.5
1.2
2.7 0
O 3.1 0.1
0.2
0.4 0
0.4
0.1
5.6 0 8.4 0.2
1.2
0.15
M1.7
MGC164
Dimensions in mm.
3H3
AL
(nH)
TYPE NUMBER
(WITH NUT)
TYPE NUMBER
(WITHOUT NUT)
40 3%
25
1170
P14/8-3D3-E40/N
P14/8-3D3-E40
63 3%
40
650
P14/8-3D3-E63/N
P14/8-3D3-E63
100 3%
63
360
1000 25%
630
P14/8-3D3-E100/N
P14/8-3D3-E100
P14/8-3D3
160 3%
100
220
P14/8-3H3-A160/N
P14/8-3H3-A160
250 3%
157
130
P14/8-3H3-A250/N
P14/8-3H3-A250
315 3%
198
100
P14/8-3H3-A315/N
P14/8-3H3-A315
400 3%
251
75
P14/8-3H3-A400/N
P14/8-3H3-A400
1350
P14/8-3H3
2150 25%
2013 Jul 31
613
Ferroxcube
P14/8
3C91
3F3
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
63 3%
40
680
P14/8-3C81-E63
100 3%
63
390
P14/8-3C81-A100
160 3%
100
220
P14/8-3C81-A160
250 3%
157
130
P14/8-3C81-A250
315 3%
198
100
2800 25%
1 760
P14/8-3C81
2800 25%
P14/8-3C91
P14/8-3C81-A315
1 760
63 3%
40
680
P14/8-3F3-E63
100 3%
63
390
P14/8-3F3-A100
160 3%
100
220
P14/8-3F3-A160
250 3%
157
130
P14/8-3F3-A250
315 3%
198
100
1 260
2000 25%
P14/8-3F3-A315
P14/8-3F3
AL
(nH)
AIR GAP
(m)
5750 25%
3610
TYPE NUMBER
P14/8-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C81
320
0.1
3C91
315
3F3
315
0.06
GRADE
f = 100 kHz;
= 100 mT;
B
T = 100 C
Note
1. Measured at 60 C.
2013 Jul 31
614
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
0.03(1)
0.22(1)
0.1
Ferroxcube
P14/8
INDUCTANCE ADJUSTERS
General data
PARAMETER
SPECIFICATION
Material of head
and thread
polypropylene (PP),
glass fibre reinforced
Maximum operating
temperature
125 C
O 3.13
handbook, halfpage
0.07
0
6.7
2.95
M 1.7
0.7
2.4
min
MGC165
Dimensions in mm.
GRADE
3H3
L/L(1)
100
ADJ-P14-ORANGE
14
160
ADJ-P14-WHITE
17
10
ADJ-P14-BROWN
15
250
3D3
ADJ-P14-WHITE
ADJ-P14-BROWN
L/L(1)
24
315
ADJ-P14-WHITE
400
ADJ-P14-BROWN
630
ADJ-P14-BROWN
40
ADJ-P14-ORANGE
63
ADJ-P14-ORANGE
11
100
ADJ-P14-ORANGE
Note
1. Maximum adjustment range.
2013 Jul 31
615
24
20
Ferroxcube
P14/8
COIL FORMERS
General data for CP-P14/8 coil former
PARAMETER
SPECIFICATION
0
5.4 0.2
0.4
0.3
0
0
7.1 0.15
11.5 0.2
2.2
0.5
6.1 +0.2
0
CBW601
0.4
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
8.8
4.1
28.9
221
CP-P14/8-1S
2 4.0
2 1.85
28.9
2 x 100
CP-P14/8-2S
2013 Jul 31
616
Ferroxcube
P14/8
SPECIFICATION
6.1
min
5.5
max
1.9
min
7.1
11.55
max
MGB529
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH (mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
9.4
4.5
29.0
236
CP-P14/8-1S-A
2 x 4.32
2 x 2.0
29.0
2 x 108
CP-P14/8-2S-A
3 2.19
3 1.2
29.0
3 x 55.0
CP-P14/8-3S-A
2013 Jul 31
617
Ferroxcube
P14/8
SPECIFICATION
Pin material
Solderability
5.4 max.
3.55
4.45
0.75
19 11.55 6
max. max. min.
7.1
16.1
2.4
4.75
0.25
6.1 max.
6.8
max.
CBW106
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH
OF TURN
(mm)
LENGTH
OF PINS
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
8.65
4.4
29.0
4.75
217
TYPE NUMBER
CPV-P14/8-1S-4SPD
8.65
4.4
29.0
6.8
217
CPV-P14/8-1S-4SPDL
2 3.87
2 2.0
29.0
4.75
2 x 97.1
CPV-P14/8-2S-4SPD
2 3.87
2 2.0
29.0
6.8
2 x 97.1
CPV-P14/8-2S-4SPDL
2013 Jul 31
618
Ferroxcube
P14/8
SPECIFICATION
Pin material
Solderability
5.4 max.
7.1
4.45
0.75
19 11.55 6
max. max. min.
7.11
max.
16.3
2.4
4.35
min.
10.2 max.
6.85
max.
CBW107
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH
OF TURN
(mm)
LENGTH
OF PINS
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
8.65
4.4
29.0
4.4
217
TYPE NUMBER
CPV-P14/8-1S-6PD
8.65
4.4
29.0
6.8
217
CPV-P14/8-1S-6PDL
2 3.87
2 2.0
29.0
4.4
2 x 97.1
CPV-P14/8-2S-6PD
2 3.87
2 2.0
29.0
6.8
2 x 97.1
CPV-P14/8-2S-6PDL
2013 Jul 31
619
Ferroxcube
P14/8
MOUNTING PARTS
General data for mounting parts
ITEM
Tag plate
REMARKS
FIGURE
TYPE NUMBER
TGP-P14/8-C
CON-P14/8
SPR-P14/8
Spring
CrNi-steel
spring force: 60 N when mounted
Clamp
10
CLM/TP-P14/8
Washer
phenolformaldehyde (PF)
11
WAS-CLM/TP-P14/8
2.54
2.1
5.08
1.5
mark
3.5
10.16 5.08
0.8
15.7 max.
Dimensions in mm.
2013 Jul 31
620
+0.15
1.3 0
CBW602
Ferroxcube
P14/8
4.5
mark
0.6
5
1
8
9.45 max.
CBW422
Dimensions in mm.
1.3
handbook, halfpage
+0.3
0
13.4
max
MGC169
Dimensions in mm.
2013 Jul 31
15.6 max.
621
Ferroxcube
P14/8
handbook, halfpage
handbook, halfpage
9.4 13.2
9.27
0.05
13
4
0
13.7 0.13
9.65
0.38
0.08
MGB604
MBG174
Dimensions in mm.
Dimensions in mm.
2013 Jul 31
622
Ferroxcube
P14/8/I
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.700
mm1
Ve
effective volume
628
mm3
Ie
effective length
21.0
mm
Ae
effective area
29.9
mm2
Amin
minimum area
23.6
mm2
mass of set
3.5
9.5 0.3
handbook, halfpage
5.9
0.1
3.3
0.6
11.8 14.05
0.2 0.25
0.3
0.075
5.6
8.4
+0.4/0 0.15
CBW108
Dimensions in mm.
3C91
3F3
AL
(nH)
TYPE NUMBER
100 3%
56
470
P14/8/I-3C81-A100
160 3%
89
270
P14/8/I-3C81-A160
250 3%
140
160
P14/8/I-3C81-A250
315 5%
176
120
P14/8/I-3C81-A315
400 5%
224
95
P14/8/I-3C81-A400
2900 25%
1 620
2900 25%
1 620
56
470
P14/8/I-3F3-A100
160 3%
89
270
P14/8/I-3F3-A160
250 3%
140
160
P14/8/I-3F3-A250
315 5%
176
120
P14/8/I-3F3-A315
400 5%
224
95
P14/8/I-3F3-A400
1 340
100 3%
2400 25%
2013 Jul 31
AIR GAP
(m)
623
P14/8/I-3C81
P14/8/I-3C91
P14/8/I-3F3
Ferroxcube
P14/8/I
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C81
320
0.15
3C91
315
3F3
315
0.07
GRADE
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
0.032(1)
0.24(1)
0.12
Note
1. Measured at 60 C.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
8.8
4.1
28.9
263
CP-P14/8-1S
2 4.0
2 1.85
28.9
2 x 120
CP-P14/8-2S
Winding data and area product (for P14/8/I) for CP-P14/8-A coil former
NUMBER OF
SECTIONS
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH (mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
9.4
4.5
29.0
281
CP-P14/8-1S-A
2 x 4.32
2 x 2.0
29.0
2 x 129
CP-P14/8-2S-A
3 2.19
3 1.2
29.0
3 x 65.5
CP-P14/8-3S-A
Winding data and area product (for P14/8/I) for 4-pins P14/8 coil former for PCB mounting
NUMBER
OF
SECTIONS
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH
OF TURN
(mm)
LENGTH
OF PINS
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
8.65
4.4
29.0
4.4
259
TYPE NUMBER
CPV-P14/8-1S-4SPD
8.65
4.4
29.0
6.8
259
CPV-P14/8-1S-4SPDL
2 3.87
2 2.0
29.0
4.4
2 x 116
CPV-P14/8-2S-4SPD
2 3.87
2 2.0
29.0
6.8
2 x 116
CPV-P14/8-2S-4SPDL
2013 Jul 31
624
Ferroxcube
P14/8/I
Winding data and area product (for P14/8/I) for 6-pins P14/8 coil former for PCB mounting
NUMBER
OF
SECTIONS
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH
OF TURN
(mm)
LENGTH
OF PINS
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
8.65
4.4
29.0
4.4
259
8.65
4.4
29.0
6.8
259
CPV-P14/8-1S-6PDL
2 3.87
2 2.0
29.0
4.4
2 x 116
CPV-P14/8-2S-6PD
2 3.87
2 2.0
29.0
6.8
2 x 116
CPV-P14/8-2S-6PDL
2013 Jul 31
625
TYPE NUMBER
CPV-P14/8-1S-6PD
Ferroxcube
P18/11
CORE SETS
Effective core parameters
SYMBOL
13.4 0.3
handbook, halfpage
PARAMETER
VALUE
UNIT
(I/A)
0.597
mm1
Ve
effective volume
1120
mm3
Ie
effective length
25.8
mm
Ae
effective area
43.3
mm2
Amin
minimum area
36.0
mm2
mass of set
6.0
0.5
14.9 0
0
0
7.6 0.3 18.4 0.8
3.8
0.6
O 3.1 0.1
0.2
0.4 0
0.4 10.6
7.2 0
0.1
2.3
0.15
M1.7
MGC158
Dimensions in mm.
3H3
2013 Jul 31
AL
(nH)
63 3%
100 3%
160 3%
1 400 25%
160 3%
250 3%
315 3%
400 3%
630 5%
3 100 25%
e
30
47
76
665
76
119
149
190
299
1 470
626
TYPE NUMBER
(WITH NUT)
P18/11-3D3-E63/N
P18/11-3D3-E100/N
P18/11-3D3-E160/N
P18/11-3H3-E160/N
P18/11-3H3-A250/N
P18/11-3H3-A315/N
P18/11-3H3-A400/N
P18/11-3H3-A630/N
TYPE NUMBER
(WITHOUT NUT)
P18/11-3D3-E63
P18/11-3D3-E100
P18/11-3D3-E160
P18/11-3D3
P18/11-3H3-E160
P18/11-3H3-A250
P18/11-3H3-A315
P18/11-3H3-A400
P18/11-3H3-A630
P18/11-3H3
Ferroxcube
P18/11
3C91
3F3
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
100 3%
47
710
P18/11-3C81-E100
160 3%
76
400
P18/11-3C81-A160
250 3%
119
240
P18/11-3C81-A250
315 3%
149
180
P18/11-3C81-A315
400 3%
190
140
P18/11-3C81-A400
4000 25%
1900
4000 25%
1900
47
710
P18/11-3F3-E100
160 3%
76
400
P18/11-3F3-A160
250 3%
119
240
P18/11-3F3-A250
315 3%
149
180
P18/11-3F3-A315
400 3%
190
140
P18/11-3F3-A400
1350
100 3%
2850 25%
P18/11-3C81
P18/11-3C91
P18/11-3F3
AL
(nH)
AIR GAP
(m)
7500 25%
3560
TYPE NUMBER
P18/11-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C81
320
0.26
3C91
315
0.07(1)
0.45(1)
3F3
315
0.13
0.22
Note
1. Measured at 60 C.
2013 Jul 31
627
Ferroxcube
P18/11
INDUCTANCE ADJUSTERS
General data
0.07
O 3.13 0
handbook, halfpage
ITEM
SPECIFICATION
Material of head
and thread
polypropylene (PP),
glass fibre reinforced
Maximum operating
temperature
125 C
8.8
3.35
M 1.7
0.7
2.4
min
MGC159
Dimensions in mm.
3D3
AL
(nH)
63
ADJ-P18-YELLOW
100
160
ADJ-P18-YELLOW
250
ADJ-P18-RED
11
315
ADJ-P18-RED
400
ADJ-P18-WHITE
630
16
ADJ-P18-BROWN
L/L(1)
42
ADJ-P18-RED
18
ADJ-P18-BROWN
28
ADJ-P18-WHITE
14
ADJ-P18-BROWN
18
ADJ-P18-BROWN
14
ADJ-P18-VIOLET
20
ADJ-P18-VIOLET
16
ADJ-P18-VIOLET
1000
ADJ-P18-VIOLET
1250
40
ADJ-P18-YELLOW
63
ADJ-P18-YELLOW
100
160
ADJ-P18-RED
17
Note
1. Maximum adjustment range.
2013 Jul 31
L/L(1)
628
15
ADJ-P18-RED
19
26
Ferroxcube
P18/11
COIL FORMERS
General data CP-P18/11
PARAMETER
SPECIFICATION
0
7 0.1
0.4
0.3
0
8.7 0.1
2.0
7.7
0.1
0
0.5
0
14.8 0.2
MGC160
0.4
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
TYPE NUMBER
17.1
5.7
36.6
740
CP-P18/11-1S
2 7.95
2 2.65
36.6
2 x 344
CP-P18/11-2S
3 4.95
3 1.6
36.6
3 x 214
CP-P18/11-3S
2013 Jul 31
629
Ferroxcube
P18/11
SPECIFICATION
Pin material
Solderability
7.05 max
7.1
6.05
0.75
1.7
24.55 14.8
max max
7.7
min
8.65
21.5
2.4
4.35
min
10.2 max
8.45
max
MGB622
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm 2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
LENGTH
OF PINS
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
16.8
6.0
36.7
4.4
727
CPV-P18/11-1S-6PD
16.8
6.0
36.7
6.8
727
CPV-P18/11-1S-6PDL
TYPE NUMBER
2 7.61
2 2.8
36.7
4.4
2 x 330
CPV-P18/11-2S-6PD
2 7.61
2 2.8
36.7
6.8
2 x 330
CPV-P18/11-2S-6PDL
3 4.58
3 1.7
36.7
4.4
3 x 198
CPV-P18/11-3S-6PD
3 4.58
3 1.7
36.7
6.8
3 x 198
CPV-P18/11-3S-6PDL
2013 Jul 31
630
Ferroxcube
P18/11
MOUNTING PARTS
General data for mounting parts
ITEM
Tag plate
REMARKS
FIGURE
TYPE NUMBER
TGP-P18/11-C
CON-P18/11
SPR-P18/11
Spring
CrNi-steel
spring force: 100 N when mounted
Clamp
CLM/TP-P18/11
Washer
phenolformaldehyde (PF)
WAS-CLM/TP-P18/11
13
2.1
10.16
10.16 5.08
2.54
1.5
5.08
O 4.8
O 0.8
mark
19.7 max
Dimensions in mm.
2013 Jul 31
631
0.15
1.3 0
MGC161
Ferroxcube
P18/11
10
8.2
mark
0.6
1
5
8
12.7 max.
16.55 min.
19.9 max.
Dimensions in mm.
0.3
1.4 0
handbook, halfpage
17.3
max
MGC163
Dimensions in mm.
2013 Jul 31
632
CBW423
Ferroxcube
P18/11
handbook, halfpage
handbook, halfpage
9.1 16.8
9.27
0.05
16.5
4
0.46
0.13
11.7
18.3
17.5 0.25
MBE683
Dimensions in mm.
Dimensions in mm.
2013 Jul 31
MGB605
633
Ferroxcube
P18/11/I
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.560
mm1
Ve
effective volume
1270
mm3
Ie
effective length
26.7
mm
Ae
effective area
47.5
mm2
Amin
minimum area
37.5
mm2
mass of set
13.4 0.3
handbook, halfpage
7.4
3.8
0.15 0.6
15.1 17.9
0.25 0.3
0.5
0.13
7.2
10.6
+0.4/0 0.15
MGB573
Dimensions in mm.
AL
(nH)
3F3
160 3%
72
450
P18/11/I-3C81-A160
112
260
P18/11/I-3C81-A250
315 3%
141
200
P18/11/I-3C81-A315
400 3%
179
150
P18/11/I-3C81-A400
282
90
4200 25%
1880
P18/11/I-3C81
4200 25%
P18/11/I-3C91
P18/11/I-3C81-A630
1880
160 3%
72
450
P18/11/I-3F3-A160
250 3%
112
260
P18/11/I-3F3-A250
315 3%
141
200
P18/11/I-3F3-A315
400 3%
179
150
P18/11/I-3F3-A400
282
90
1390
630 5%
3110 25%
2013 Jul 31
TYPE NUMBER
250 3%
630 5%
3C91
AIR GAP
(m)
634
P18/11/I-3F3-A630
P18/11/I-3F3
Ferroxcube
P18/11/I
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C81
320
0.3
3C91
315
0.08(1)
0.5 (1)
3F3
315
0.14
0.24
Note
1. Measured at 60 C.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
TYPE NUMBER
17.1
5.7
36.6
812
CP-P18/11-1S
2 7.95
2 2.65
36.6
2 x 378
CP-P18/11-2S
3 4.95
3 1.6
36.6
3 x 235
CP-P18/11-3S
Winding data and area product (for P18/11/I) for 6-pins P18/11 coil former for PCB mounting
NUMBER
OF
SECTIONS
MINIMUM
WINDING
AREA
(mm 2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
LENGTH
OF PINS
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
16.8
6.0
36.7
4.4
798
CPV-P18/11-1S-6PD
16.8
6.0
36.7
6.8
798
CPV-P18/11-1S-6PDL
2 7.61
2 2.8
36.7
4.4
2 x 361
CPV-P18/11-2S-6PD
TYPE NUMBER
2 7.61
2 2.8
36.7
6.8
2 x 361
CPV-P18/11-2S-6PDL
3 4.58
3 1.7
36.7
4.4
3 x 218
CPV-P18/11-3S-6PD
3 4.58
3 1.7
36.7
6.8
3 x 218
CPV-P18/11-3S-6PDL
2013 Jul 31
635
Ferroxcube
P22/13
CORE SETS
SYMBOL
15
handbook, halfpage
VALUE
0.4
UNIT
(I/A)
0.497
mm1
Ve
effective volume
2000
mm3
Ie
effective length
31.5
mm
Ae
effective area
63.4
mm2
Amin
minimum area
50.9
mm2
mass of set
12
0.6
17.9 0
0
9.4 0.3 22
0
0.8
3.8
0.6
0.3
O 4.4 0
0.2
0.5 0
0.4
9.2 0
2.7
0.15
13.4
0.2
MGC127
M2
Dimensions in mm.
3H3
2013 Jul 31
AL
(nH)
40 3%
63 3%
100 3%
160 3%
1700 25%
160 3%
250 3%
315 3%
400 3%
630 3%
3900 25%
e
16
25
40
63
670
64
100
125
158
249
1540
636
TYPE NUMBER
(WITH NUT)
P22/13-3D3-E40/N
P22/13-3D3-E63/N
P22/13-3D3-E100/N
P22/13-3D3-E160/N
P22/13-3H3-E160/N
P22/13-3H3-E250/N
P22/13-3H3-E315/N
P22/13-3H3-A400/N
P22/13-3H3-A630/N
TYPE NUMBER
(WITHOUT NUT)
P22/13-3D3-E40
P22/13-3D3-E63
P22/13-3D3-E100
P22/13-3D3-E160
P22/13-3D3
P22/13-3H3-E160
P22/13-3H3-E250
P22/13-3H3-E315
P22/13-3H3-A400
P22/13-3H3-A630
P22/13-3H3
Ferroxcube
P22/13
3C91
3F3
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
160 3%
63
610
P22/13-3C81-A160
250 3%
99
360
P22/13-3C81-A250
315 3%
125
280
P22/13-3C81-A315
400 3%
158
210
P22/13-3C81-A400
630 3%
249
120
5200 25%
2060
5200 25%
2060
63
610
P22/13-3F3-A160
160 3%
P22/13-3C81-A630
P22/13-3C81
P22/13-3C91
250 3%
99
360
P22/13-3F3-A250
315 3%
125
280
P22/13-3F3-A315
400 3%
158
210
P22/13-3F3-A400
630 3%
249
120
1410
3550 25%
P22/13-3F3-A630
P22/13-3F3
AL
(nH)
AIR GAP
(m)
9250 25%
3660
TYPE NUMBER
P22/13-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C81
320
0.46
3C91
315
0.12(1)
0.9(1)
3F3
315
0.22
0.4
Note
1. Measured at 60 C.
2013 Jul 31
637
Ferroxcube
P22/13
INDUCTANCE ADJUSTERS
General data
handbook, halfpage
PARAMETER
O 4.65
SPECIFICATION
Material of head
and thread
polypropylene (PP),
glass fibre reinforced
Maximum operating
temperature
125 C
0.15
0
10.4
3.85
M2
3.7
min
0.8
MGC128
Dimensions in mm.
AL
(nH)
100
3H3
L/L
(1)
L/L
(1)
L/L
(1)
ADJ-P22/RM8-RED
16
ADJ-P22/RM8-ORANGE
21
160 ADJ-P22/RM8-RED
11
ADJ-P22/RM8-ORANGE
17
ADJ-P22/RM8-WHITE
27
250 ADJ-P22/RM8-ORANGE
10
ADJ-P22/RM8-WHITE
18
315 ADJ-P22/RM8-ORANGE
ADJ-P22/RM8-BROWN
22
30
400 ADJ-P22/RM8-WHITE
11
ADJ-P22/RM8-BROWN
17
ADJ-P22/RM8-BLACK
630 ADJ-P22/RM8-BROWN
10
ADJ-P22/RM8-BLACK
18
1 000 ADJ-P22/RM8-BROWN
ADJ-P22/RM8-BLACK
12
1 250 ADJ-P22/RM8-BROWN
ADJ-P22/RM8-BLACK
3D3
40
ADJ-P22/RM8-ORANGE
63
ADJ-P22/RM8-ORANGE
26
100
ADJ-P22/RM8-RED
16
ADJ-P22/RM8-ORANGE
23
ADJ-P22/RM8-ORANGE
15
160 ADJ-P22/RM8-RED
10
Note
1. Maximum adjustment range.
2013 Jul 31
638
27
Ferroxcube
P22/13
COIL FORMERS
General data CP-P22/13 coil former
PARAMETER
SPECIFICATION
9.0
0.5
0
0.15
0.4
10.7 0
17.8 0
0.15
0.2
2.7
9.6 +0.15
0
0.6
CBW603
0.5
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
26.2
7.5
44.5
1660
CP-P22/13-1S
2 12.2
2 3.45
44.5
2 x 773
CP-P22/13-2S
3 7.6
3 2.1
44.5
3 x 482
CP-P22/13-3S
2013 Jul 31
639
Ferroxcube
P22/13
SPECIFICATION
Pin material
Solderability
9 max
7.1
7.8
0.75
2.25
10.6
25
2.4
4.35
min
10.4 max
10.4 max
MGB624
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm 2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
MINIMUM
LENGTH OF
PINS
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
25.2
7.8
44.5
4.4
1600
CPV-P22/13-1S-6PD
CPV-P22/13-1S-6PDL
TYPE NUMBER
25.2
7.8
44.5
6.8
1600
2 11.7
2 3.6
44.5
4.4
2 x 742
CPV-P22/13-2S-6PD
2 11.7
2 3.6
44.5
6.8
2 x 742
CPV-P22/13-2S-6PDL
3 7.03
3 2.2
44.5
4.4
3 x446
CPV-P22/13-3S-6PD(1)
3 7.03
3 2.2
44.5
6.8
3 x 446
CPV-P22/13-3S-6PDL(1)
Note
1. In accordance with UL 94-HB.
2013 Jul 31
640
Ferroxcube
P22/13
MOUNTING PARTS
General data and ordering information
ITEM
Tag plate
REMARKS
FIGURE
TYPE NUMBER
TGP-P22/13-C
CON-P22/13
SPR-P22/13
Spring
CrNi-steel
spring force: 140 N when mounted
Clamp
CLM/TS-P22/13
Washer
phenolformaldehyde (PF)
WAS-CLM/TS-P22/13
15
10.16
2.54
2.1
1.5
5.08
4.5
10.16 5.08
5.8
0.8
1.3 0.15
0
mark
6
CBW604
23.2 max.
Dimensions in mm.
2013 Jul 31
641
Ferroxcube
P22/13
10
8.2
mark
0.6
1
5
15.6 max.
20.2 min.
23.3 max.
Dimensions in mm.
0.3
1.4 0
handbook, halfpage
20.5
max
MGC132
Dimensions in mm.
2013 Jul 31
642
CBW424
Ferroxcube
P22/13
33
handbook, halfpage
28
8
handbook, halfpage
14
20
3.2
9.5
8.2
22
0.25
13.5
21
15.1
MBG175
MBE672
Dimensions in mm.
Dimensions in mm.
2013 Jul 31
643
Ferroxcube
P22/13/I
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.450
mm1
Ve
effective volume
2460
mm3
Ie
effective length
33.3
mm
Ae
effective area
73.4
mm2
Amin
minimum area
58.1
mm2
mass of set
13
15 0.4
handbook, halfpage
18.2
22
0.3
3.8
0
9.4 0.3 0.6
0
0.8
0.6
0.13
9.2
13.4
+0.4/0 0.2
MGB576
Dimensions in mm.
3C91
3F3
2013 Jul 31
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
250 3%
90
420
P22/13/I-3C81-A250
315 3%
114
320
P22/13/I-3C81-A315
400 3%
144
250
P22/13/I-3C81-A400
630 3%
227
145
P22/13/I-3C81-A630
1000 5%
361
85
5 330 25%
1920
P22/13/I-3C81
5 330 25%
P22/13/I-3C91
P22/13/I-3C81-A1000
1920
250 3%
90
420
P22/13/I-3F3-A250
315 3%
114
320
P22/13/I-3F3-A315
400 3%
144
250
P22/13/I-3F3-A400
630 3%
227
145
P22/13/I-3F3-A630
1000 5%
361
85
4 070 25%
1470
644
P22/13/I-3F3-A1000
P22/13/I-3F3
Ferroxcube
P22/13/I
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C81
320
0.57
3C91
315
3F3
315
0.27
GRADE
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
0.13(1)
0.92(1)
0.47
Note
1. Measured at 60 C.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
26.2
7.5
44.5
1920
CP-P22/13-1S
2 12.2
2 3.45
44.5
2 x 895
CP-P22/13-2S
3 7.6
3 2.1
44.5
3 x 558
CP-P22/13-3S
Winding data and area product (for P22/13/I) for 6-pins P22/13 coil former for PCB mounting
NUMBER
OF
SECTIONS
MINIMUM
WINDING
AREA
(mm 2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
MINIMUM
LENGTH OF
PINS
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
25.2
7.8
44.5
4.4
1850
CPV-P22/13-1S-6PD
25.2
7.8
44.5
6.8
1850
CPV-P22/13-1S-6PDL
TYPE NUMBER
2 11.7
2 3.6
44.5
4.4
2 x 859
CPV-P22/13-2S-6PD
2 11.7
2 3.6
44.5
6.8
2 x 859
CPV-P22/13-2S-6PDL
3 7.03
3 2.2
44.5
4.4
3 x 516
CPV-P22/13-3S-6PD(1)
3 7.03
3 2.2
44.5
6.8
3 x 516
CPV-P22/13-3S-6PDL(1)
Note
1. In accordance with UL 94-HB.
2013 Jul 31
645
Ferroxcube
P26/16
CORE SETS
18 0.4
PARAMETER
VALUE
UNIT
(I/A)
0.400
mm1
Ve
effective volume
3530
mm3
Ie
effective length
37.6
mm
Ae
effective area
93.9
mm2
Amin
minimum area
77.4
mm2
mass of set
20
+0.8 25.5
21.2 0
0.5
0
11.5 0.4 3.8
0.6
5.4
+0.2
0.5 0
+0.4
11 0
2.9
0.15
16.1
0.2
CBW425
M2.6
Dimensions in mm.
3H3
AL
(nH)
TYPE NUMBER
(WITH NUT)
TYPE NUMBER
(WITHOUT NUT)
100 3%
32
1630
P26/16-3D3-E100/N
P26/16-3D3-E100
160 3%
51
890
P26/16-3D3-E160/N
P26/16-3D3-E160
250 3%
80
510
2150 25%
685
P26/16-3D3-E250/N
P26/16-3D3-E250
P26/16-3D3
160 3%
51
940
P26/16-3H3-E160/N
P26/16-3H3-E160
250 3%
80
550
P26/16-3H3-E250/N
P26/16-3H3-E250
315 3%
100
420
P26/16-3H3-E315/N
P26/16-3H3-E315
400 3%
127
310
P26/16-3H3-E400/N
P26/16-3H3-E400
630 3%
201
180
P26/16-3H3-A630/N
P26/16-3H3-A630
1590
P26/16-3H3
5000 25%
2013 Jul 31
646
Ferroxcube
P26/16
AL
(nH)
3C91
TYPE NUMBER
160 3%
51
950
P26/16-3C81-E160
250 3%
80
560
P26/16-3C81-A250
315 3%
100
420
P26/16-3C81-A315
400 3%
127
320
P26/16-3C81-A400
P26/16-3C81-A630
630 3%
3F3
AIR GAP
(m)
200
190
6700 25%
2130
6700 25%
2130
51
950
P26/16-3F3-E160
250 3%
80
560
P26/16-3F3-A250
315 3%
100
420
P26/16-3F3-A315
400 3%
127
320
P26/16-3F3-A400
200
190
P26/16-3F3-A630
1470
160 3%
630 3%
4600 25%
P26/16-3C81
P26/16-3C91
P26/16-3F3
AL
(nH)
AIR GAP
(m)
12000 25%
3820
TYPE NUMBER
P26/16-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C81
320
0.82
3C91
315
0.21(1)
1.6(1)
3F3
315
0.4
0.65
Note
1. Measured at 60 C.
2013 Jul 31
647
Ferroxcube
P26/16
INDUCTANCE ADJUSTERS
General data
handbook, halfpage
PARAMETER
O 5.65
0.2
0
SPECIFICATION
Material of head
and thread
polypropylene (PP),
glass fibre reinforced
Maximum operating
temperature
125 C
12.2
4.45
M 2.6
4.7
min
MBE210
Dimensions in mm.
AL
(nH)
L/L(1)
L/L(1)
63
ADJ-P26-RED
25
ADJ-P26-RED
22
160
ADJ-P26-RED
10
15
ADJ-P26-BROWN
23
315 ADJ-P26-RED
ADJ-P26-BROWN
18
400 ADJ-P26-RED
ADJ-P26-BROWN
13
ADJ-P26-GREY
25
630 ADJ-P26-BROWN
ADJ-P26-GREY
16
1000 ADJ-P26-BROWN
ADJ-P26-GREY
1600
ADJ-P26-GREY
100
ADJ-P26-RED
160
ADJ-P26-RED
250 ADJ-P26-RED
400
ADJ-P26-GREY
14
Note
1. Maximum adjustment range.
2013 Jul 31
100
250 ADJ-P26-RED
3D3
648
17
ADJ-P26-GREY
21
35
Ferroxcube
P26/16
COIL FORMERS
General data for CP-P26/16 coil former
PARAMETER
SPECIFICATION
0
10.8 0.15
0.5
0.4
0
0
12.8 0.15 20.9 0.2
2.7
0.6
0.15
11.7 0
0.5
MBE211
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
TYPE NUMBER
37.1
9.3
52.6
3480
CP-P26/16-1S
2 17.5
2 4.35
52.6
2 x 1640
CP-P26/16-2S
3 11
3 2.7
52.6
3 x 1030
CP-P26/16-3S
2013 Jul 31
649
Ferroxcube
P26/16
SPECIFICATION
Pin material
Solderability
10.8 max
7.1
9.7
0.75
2.8
28.5
12.7
2.4
4.35
min
10.3 max
12.25 max
MGB626
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm 2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
MINIMUM
LENGTH OF
PINS
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
36.7
9.7
52.7
4.4
3450
CPV-P26/16-1S-6PD
36.7
9.7
52.7
6.8
3450
CPV-P26/16-1S-6PDL
TYPE NUMBER
2 16.6
2 4.5
52.7
4.4
2 x 1560
CPV-P26/16-2S-6PD
2 16.6
2 4.5
52.7
6.8
2 x 1560
CPV-P26/16-2S-6PDL
3 10.3
3 2.8
52.7
4.4
3 x 967
CPV-P26/16-3S-6PD(1)
3 10.3
3 2.8
52.7
6.8
3 x 967
CPV-P26/16-3S-6PDL(1)
Note
1. In accordance with UL 94-HB.
2013 Jul 31
650
Ferroxcube
P26/16
MOUNTING PARTS
General data
ITEM
Tag plate
REMARKS
FIGURE
TYPE NUMBER
TGP-P26/16-C
CON-P26/16
SPR-P26/16
CLM/TP-P26/16
Spring
CrNi-steel
spring force: 200 N when mounted
Clamp
18
15.24
2.1
1.5
10.16
0.8
4.5 6.5
15.24 5.08
mark
1.3 +0.15
0
27.8 max.
6
2.54
Dimensions in mm.
2013 Jul 31
651
CBW273
Ferroxcube
P26/16
10
8.2
0.6
mark
23.55 min.
5
8
18.4 max.
27.7 max.
Dimensions in mm.
0.3
1.4 0
handbook, halfpage
25.3
max
MBE216
Dimensions in mm.
2013 Jul 31
652
CBW426
Ferroxcube
P26/16
handbook, halfpage
8.6 21.1
25.4
4.8
16.6
25.4
MBE682
Dimensions in mm.
2013 Jul 31
653
Ferroxcube
P26/16/I
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.360
mm1
Ve
effective volume
4370
mm3
Ie
effective length
39.6
mm
Ae
effective area
110
mm2
Amin
minimum area
87.0
mm2
mass of set
21
18 0.4
handbook, halfpage
3.8
0.6
11.3
0.2
21.6 25.5
0.4 0.5
0.6
0.13
11
16.2
+0.4/0 0.2
MGB581
Dimensions in mm.
3C91
3F3
AL
(nH)
TYPE NUMBER
250 3%
72
660
315 3%
90
500
P26/16/I-3C81-A315
400 3%
115
380
P26/16/I-3C81-A400
P26/16/I-3C81-E250
630 3%
180
230
P26/16/I-3C81-A630
1000 3%
286
130
P26/16/I-3C81-A1000
7000 25%
2 010
P26/16/I-3C81
7000 25%
P26/16/I-3C91
2 010
250 3%
72
660
P26/16/I-3F3-E250
315 3%
90
500
P26/16/I-3F3-A315
400 3%
115
380
P26/16/I-3F3-A400
630 3%
180
230
P26/16/I-3F3-A630
286
130
P26/16/I-3F3-A1000
1 505
1000 3%
5250 25%
2013 Jul 31
654
P26/16/I-3F3
Ferroxcube
P26/16/I
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C81
320
1.0
3C91
315
0.22(1)
1.6 (1)
3F3
315
0.48
0.83
Note
1. Measured at 60 C.
MINIMUM
WINDING
WIDTH
(mm)
WINDING
AREA
(mm2)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
TYPE NUMBER
37.1
9.3
52.6
4080
CP-P26/16-1S
2 17.5
2 4.35
52.6
2 x 1925
CP-P26/16-2S
3 11
3 2.7
52.6
3 x 1210
CP-P26/16-3S
Winding data and area product (for P26/16/I) for 6-pins P26/16 coil former for PCB mounting
NUMBER
OF
SECTIONS
MINIMUM
WINDING
AREA
(mm 2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
MINIMUM
LENGTH OF
PINS
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
36.7
9.7
52.7
4.4
4040
CPV-P26/16-1S-6PD
36.7
9.7
52.7
6.8
4040
CPV-P26/16-1S-6PDL
TYPE NUMBER
2 16.6
2 4.5
52.7
4.4
2 x 1830
CPV-P26/16-2S-6PD
2 16.6
2 4.5
52.7
6.8
2 x 1830
CPV-P26/16-2S-6PDL
3 10.3
3 2.8
52.7
4.4
3 x 1130
CPV-P26/16-3S-6PD(1)
3 10.3
3 2.8
52.7
6.8
3 x 1130
CPV-P26/16-3S-6PDL(1)
Note
1. In accordance with UL 94-HB.
2013 Jul 31
655
Ferroxcube
P30/19
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.330
mm1
Ve
effective volume
6190
mm3
Ie
effective length
45.2
mm
Ae
effective area
137
mm2
Amin
minimum area
116
mm2
mass of set
34
20.5 0.5
0
13.5 0.4 4.3
0.6
+0.8
25 0
30
0.5
+0.2
5.4 0
+0.2
0.5 0
+0.4 18.8
13 0
0.2
CBW427
Dimensions in mm.
3C91
3F3
2013 Jul 31
AL
(nH)
TYPE NUMBER
250 3%
66
840
P30/19-3C81-E250
315 3%
83
640
P30/19-3C81-A315
400 3%
105
480
P30/19-3C81-A400
630 3%
165
290
P30/19-3C81-A630
1000 3%
263
170
8300 25%
2180
8300 25%
2180
66
840
250 3%
P30/19-3C81-A1000
P30/19-3C81
P30/19-3C91
P30/19-3F3-E250
315 3%
83
640
P30/19-3F3-A315
400 3%
105
480
P30/19-3F3-A400
630 3%
165
290
P30/19-3F3-A630
1000 3%
263
170
P30/19-3F3-A1000
5750 25%
1510
656
P30/19-3F3
Ferroxcube
P30/19
AL
(nH)
AIR GAP
(m)
15100 25%
3960
TYPE NUMBER
P30/19-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 400 kHz;
= 50 mT;
B
T = 100 C
T = 100 C
T = 100 C
3C81
320
1.43
3C91
315
0.37(1)
2.6(1)
3F3
315
0.7
1.2
GRADE
Note
1. Measured at 60 C.
2013 Jul 31
657
Ferroxcube
P30/19
COIL FORMERS
General data CP-P30/19 coil former
PARAMETER
SPECIFICATION
0
12.8 0.2
0.6
0.6
0
15 0.2
3.2
13.7
0.2
0
0.7
0.7
0
24.7 0.2
MGC135
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
53.2
11.1
62
7290
CP-P30/19-1S
2 24.9
2 5.15
62
2 x 3410
CP-P30/19-2S
3 15.5
3 3.2
62
3 x 2120
CP-P30/19-3S
2013 Jul 31
658
Ferroxcube
P30/19
SPECIFICATION
Pin material
Solderability
12.75 max
7.1
12
0.75
14.75
35.9
2.4
10.25 max
4.35 min
14.3 max
MGB628
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
MINIMUM
LENGTH OF
PINS
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
55.2
12.8
62.2
4.4
7560
CPV-P30/19-1S-6PD
55.2
12.8
62.2
6.8
7560
CPV-P30/19-1S-6PDL
2013 Jul 31
659
TYPE NUMBER
Ferroxcube
P30/19
MOUNTING PARTS
General data and ordering information
ITEM
Tag plate
REMARKS
FIGURE
TYPE NUMBER
TGP-P30/19-C
CON-P30/19
SPR-P30/19
CLM/TS-P30/19
Spring
CrNi-steel
spring force: 250 N when mounted
Clamp
2.54
20
15.24
2.1
10.16
2.2
5.08
10.16
15.24
4.8
8.4
0.8
mark
32.4 max.
Dimensions in mm.
2013 Jul 31
660
1.3 +0.15
0
CBW272
Ferroxcube
P30/19
10
8.2
0.6
mark
28.25 min.
5
21.4 max.
32.3 max.
Dimensions in mm.
0.3
2.3 0
handbook, halfpage
29.2
max
MGC138
Dimensions in mm.
2013 Jul 31
661
CBW428
Ferroxcube
P30/19
44.2
handbook, halfpage
38.6
6.6
28.6
16
20.6
30
MBE676
Dimensions in mm.
2013 Jul 31
662
Ferroxcube
P36/22
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
26.2 0.6
VALUE
UNIT
(I/A)
0.264
mm1
Ve
effective volume
10700
mm3
Ie
effective length
53.2
mm
Ae
effective area
202
mm2
Amin
minimum area
172
mm2
mass of set
54
0
16.2 0.6 4.9
0.6
+1
29.9 0
36.2
+0.2
5.4 0
+0.2
0.5 0
+0.4 21.7
14.6 0 0.3
CBW429
Dimensions in mm.
3C91
3F3
AL
(nH)
TYPE NUMBER
315 3%
66
970
P36/22-3C81-E315
400 3%
84
730
P36/22-3C81-E400
630 3%
132
430
P36/22-3C81-A630
1000 3%
210
250
P36/22-3C81-A1000
1600 5%
335
150
10800 25%
2260
10800 25%
2260
52
1340
250 3%
P36/22-3C81-A1600
P36/22-3C81
P36/22-3C91
P36/22-3F3-E250
315 3%
66
970
P36/22-3F3-E315
400 3%
84
730
P36/22-3F3-E400
630 3%
132
430
P36/22-3F3-A630
1000 3%
210
250
P36/22-3F3-A1000
1600 5%
335
150
1540
7350 25%
2013 Jul 31
663
P36/22-3F3-A1600
P36/22-3F3
0
1.2
Ferroxcube
P36/22
AL
(nH)
AIR GAP
(m)
17500 25%
3670
TYPE NUMBER
P36/22-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 400 kHz;
= 50 mT;
B
T = 100 C
T = 100 C
T = 100 C
3C81
320
2.5
3C91
315
0.6(1)
4.5(1)
3F3
315
1.2
2.0
GRADE
Note
1. Measured at 60 C.
2013 Jul 31
664
Ferroxcube
P36/22
COIL FORMERS
General data for coil former CP-P36/22
PARAMETER
SPECIFICATION
0
14.4 0.2
0.7
0.7
0
17.9 0.2
3.4
16.5
0.2
0
0.8
0
29.6 0.2
MGC141
0.8
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
72.4
12.5
74.3
14600
CP-P36/22-1S
2 33.9
2 5.8
74.3
2 x 6850
CP-P36/22-2S
3 21.0
3 3.6
74.3
3 x 4240
CP-P36/22-3S
2013 Jul 31
665
Ferroxcube
P36/22
MOUNTING PARTS
General data and ordering information
ITEM
Tag plate
REMARKS
FIGURE
TYPE NUMBER
TGP-P36/22-C
CON-P36/22
SPR-P36/22
Spring
CrNi-steel
spring force: 350 N when mounted
25
2.1
15.24
2.54
2.2
10.16
5.0
8.4
0.8
mark
37.9 max.
Dimensions in mm.
2013 Jul 31
666
1.3 +0.15
0
CBW605
Ferroxcube
P36/22
10
8.2
0.6
mark
33.75 min.
5
24.5 max.
38.2 max.
Dimensions in mm.
0.3
2.3 0
handbook, halfpage
34.7
max
MGC144
Dimensions in mm.
2013 Jul 31
667
CBW430
Ferroxcube
P42/29
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
32 0.7
VALUE
UNIT
(I/A)
0.259
mm1
Ve
effective volume
18200
mm3
Ie
effective length
68.6
mm
Ae
effective area
265
mm2
Amin
minimum area
214
mm2
mass of set
104
0
17.7 0.6 5.1
0.6
+1.4
35.6 0
42.4
0.7
+0.2
5.4 0
+0.2
1 0
29.4
20.3 +0.4 0.1
0
CBW431
Dimensions in mm.
3C91
3F3
2013 Jul 31
AL
(nH)
TYPE NUMBER
315 3%
65
1320
P42/29-3C81-E315
400 3%
82
990
P42/29-3C81-E400
630 3%
130
580
P42/29-3C81-A630
1000 3%
206
340
P42/29-3C81-A1 000
1600 5%
330
190
11500 25%
2 370
P42/29-3C81
11500 25%
P42/29-3C91
P42/29-3C81-A1 600
2 370
315 3%
65
1320
P42/29-3F3-E315
400 3%
82
990
P42/29-3F3-E400
630 3%
130
580
P42/29-3F3-A630
1000 3%
206
340
P42/29-3F3-A1000
1600 5%
330
190
7 700 25%
1 590
668
P42/29-3F3-A1600
P42/29-3F3
Ferroxcube
P42/29
AL
(nH)
AIR GAP
(m)
19000 25%
3910
TYPE NUMBER
P42/29-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 400 kHz;
= 50 mT;
B
T = 100 C
T = 100 C
T = 100 C
3C81
320
4.2
3C91
315
0.9(1)
7.0(1)
3F3
315
2.0
3.5
GRADE
Note
1. Measured at 60 C.
2013 Jul 31
669
Ferroxcube
P42/29
COIL FORMERS
General data CP-P42/29 coil former
PARAMETER
SPECIFICATION
19.8 max
0.9
0.2
18 0
MGC146
17.7 min
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
TYPE NUMBER
140
17.8
86
37100
CP-P42/29-1S-C
2 63
28
86
2 x 16700
CP-P42/29-2S-C
2013 Jul 31
670
Ferroxcube
P42/29
MOUNTING PARTS
General data and ordering information
ITEM
Tag plate
REMARKS
FIGURE
TYPE NUMBER
TGP-P42/29-C
CON-P42/29
SPR-P42/29
Spring
CrNi-steel
spring force: 350 N when mounted
31
2.1
15.24
2.54
2.2
10.16
5.5
8.4
0.8
mark
44.8 max.
Dimensions in mm.
2013 Jul 31
671
1.3 +0.15
0
CBW606
Ferroxcube
P42/29
10
8.2
1
44.4
0.6
mark
40.45 min.
5
Dimensions in mm.
44.9 max.
32.1 max.
CBW432
2.3
handbook, halfpage
+0.5
0
42
max
MGC149
Dimensions in mm.
2013 Jul 31
672
Ferroxcube
P66/56
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.172
mm1
Ve
effective volume
88200
mm3
Ie
effective length
123
mm
Ae
effective area
717
mm2
Amin
minimum area
591
mm2
mass of set
550
7.26
0.25
54.51
1.02
66.29
1.19
28.19
0.61
6.5 0.15
43.28
0.5
57.3
0.5
MGC156
Dimensions in mm.
GRADE
AIR GAP
(m)
TYPE NUMBER
3C81
18200 25%
2490
P66/56-3C81
3C91
18200 25%
2490
P66/56-3C91
3F3
12350 25%
1690
P66/56-3F3
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C81
320
25
3C91
315
3F3
315
10
GRADE
f = 100 kHz;
= 100 mT;
B
T = 100 C
Note
1. Measured at 60 C.
2013 Jul 31
673
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
4.7(1)
33(1)
20
Ferroxcube
P66/56
COIL FORMERS
General data CP-P66/56 coil former
PARAMETER
SPECIFICATION
41.5 0
0.3
1.4
53 0
0.5
29
+0.4 31.9
0
0.2
MFP178
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
400
38.4
130
2013 Jul 31
674
TYPE NUMBER
CP-P66/56-1S-C
Ferroxcube
Soft Ferrites
2013 Jul 31
675
Ferroxcube
Soft Ferrites
MFW066
2013 Jul 31
676
Ferroxcube
Soft Ferrites
Ve
(mm3)
Ae
(mm 2)
MASS
(g)
PT14/8
492
23.3
2.8
PTS14/8
495
22.0
2.5
PT18/11
1110
40.6
6.0
PTS18/11
1070
37.2
5.0
PT23/11
1740
61.0
10.5
PTS23/11
1810
57.2
9.0
PT23/18
2590
62.2
14
PTS23/18
2630
58.3
13
PTS30/19/I
5940
120
31
PTS34/19/I
8140
155
46
PTS40/27/I
14400
204
66
core type
gap type
A- unsymmetrical
gap to AL value
E- symmetrical
gap to AL value
core size
I for core
without
centerhole
core
material
MFW064
C P V - PT14/8 - 1S - 6P
coil former
(bobbin)
plastic
material type:
P- thermoplastic
S- thermoset
mounting
orientation
V- vertical
number
of sections
associated
core type
2013 Jul 31
677
MFW065
Ferroxcube
PT14/8
(1408TS)
PARAMETER
14.05 0.25
handbook, halfpage
VALUE
11.8 0.2
8.6 min.
UNIT
(I/A)
0.910
mm1
Ve
effective volume
492
mm3
Ie
effective length
21.1
mm
Ae
effective area
23.3
mm2
Amin
minimum area
19.9
mm2
mass of set
2.8
9.4
0.15
3.3 0.6
5.9 0.1
3.1 0.075
5.8
0.2
8.3
0.15
CBW109
Dimensions in mm.
3C91
3F3
2013 Jul 31
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
63 3%
45
630
PT14/8-3C81-A63
100 3%
72
360
PT14/8-3C81-A100
160 3%
115
210
PT14/8-3C81-A160
250 3%
180
120
PT14/8-3C81-A250
315 5%
227
90
PT14/8-3C81-A315
2400 25%
1 730
PT14/8-3C81
2400 25%
PT14/8-3C91
1 730
63 3%
45
630
PT14/8-3F3-A63
100 3%
72
360
PT14/8-3F3-A100
160 3%
115
210
PT14/8-3F3-A160
250 3%
180
120
PT14/8-3F3-A250
315 5%
227
90
PT14/8-3F3-A315
1650 25%
1 190
678
PT14/8-3F3
Ferroxcube
PT14/8
(1408TS)
AIR GAP
(m)
4 500 25%
3240
GRADE
3E27
TYPE NUMBER
PT14/8-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C81
320
0.11
3C91
320
3F3
315
0.06
GRADE
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
0.03(1)
0.22(1)
0.1
Note
1. Measured at 60 C.
2013 Jul 31
679
Ferroxcube
PT14/8
(1408TS)
SPECIFICATION
Pin material
Solderability
3.8
5.51 max
1.1
16.64 6.15
max min
4.06
7.16 11.53
max
14
12.95 max
5.21 min
7.85 max
MGB614
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
7.9
4.1
29.2
184
TYPE NUMBER
CPV-PT14/8-1S-6P
Additional coil formers and mounting parts are those of P14/8, but area product is different.
Winding data and area product (for PT14/8) for CP-P14/8 coil former
NUMBER OF
SECTIONS
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
8.8
4.1
28.9
205
CP-P14/8-1S
2 4.0
2 1.85
28.9
2 x 93.2
CP-P14/8-2S
2013 Jul 31
680
Ferroxcube
PT14/8
(1408TS)
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH (mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
9.4
4.5
29.0
219
CP-P14/8-1S-A
2 x 4.32
2 x 2.0
29.0
2 x 101
CP-P14/8-2S-A
3 2.19
3 1.2
29.0
3 x 51.0
CP-P14/8-3S-A
Winding data and area product (for PT14/8) for 4-pins P14/8 coil former for PCB mounting
NUMBER
OF
SECTIONS
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH
OF TURN
(mm)
LENGTH
OF PINS
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
8.65
4.4
29.0
4.4
202
TYPE NUMBER
CPV-P14/8-1S-4SPD
8.65
4.4
29.0
6.8
202
CPV-P14/8-1S-4SPDL
2 3.87
2 2.0
29.0
4.4
2 x 90.2
CPV-P14/8-2S-4SPD
2 3.87
2 2.0
29.0
6.8
2 x 90.2
CPV-P14/8-2S-4SPDL
Winding data and area product (for PT14/8) for 6-pins P14/8 coil former for PCB mounting
NUMBER
OF
SECTIONS
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH
OF TURN
(mm)
LENGTH
OF PINS
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
8.65
4.4
29.0
4.4
202
8.65
4.4
29.0
6.8
202
CPV-P14/8-1S-6PDL
2 3.87
2 2.0
29.0
4.4
2 x 90.2
CPV-P14/8-2S-6PD
2 3.87
2 2.0
29.0
6.8
2 x 90.2
CPV-P14/8-2S-6PDL
2013 Jul 31
681
TYPE NUMBER
CPV-P14/8-1S-6PD
Ferroxcube
PTS14/8
(1408THS)
14.05 0.25
handbook, halfpage
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
1.02
mm1
Ve
effective volume
495
mm3
Ie
effective length
22.5
mm
Ae
effective area
22.0
mm2
Amin
minimum area
19.9
mm2
mass of set
2.5
11.8 0.2
8.6 min.
9.4
0.15
5.9 0.1
3.1 0.075
5.8
0.2
8.3
0.15
CBW110
Dimensions in mm.
3C91
3F3
AL
(nH)
AIR GAP
(m)
63 3%
51
590
100 3%
81
340
PTS14/8-3C81-A100
160 3%
130
190
PTS14/8-3C81-A160
250 3%
204
110
PTS14/8-3C81-A250
315 5%
257
90
PTS14/8-3C81-A315
2330 25%
1900
PTS14/8-3C81
2330 25%
PTS14/8-3C91
PTS14/8-3C81-A63
1900
63 3%
51
590
100 3%
81
340
PTS14/8-3F3-A100
160 3%
130
190
PTS14/8-3F3-A160
250 3%
204
110
PTS14/8-3F3-A250
315 5%
257
90
PTS14/8-3F3-A315
1320
1625 25%
2013 Jul 31
TYPE NUMBER
682
PTS14/8-3F3-A63
PTS14/8-3F3
Ferroxcube
PTS14/8
(1408THS)
AL
(nH)
AIR GAP
(m)
4370 25%
3540
TYPE NUMBER
PTS14/8-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C81
320
0.1
3C91
320
3F3
315
0.054
GRADE
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
0.026(1)
0.19(1)
0.94
Note
1. Measured at 60 C.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
7.9
4.1
29.2
174
TYPE NUMBER
CPV-PT14/8-1S-6P
Winding data and area product (for PTS14/8) for CP-P14/8 coil former
NUMBER OF
SECTIONS
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
8.8
4.1
28.9
194
CP-P14/8-1S
2 4.0
2 1.85
28.9
2 x 88.0
CP-P14/8-2S
2013 Jul 31
683
Ferroxcube
PTS14/8
(1408THS)
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH (mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
9.4
4.5
29.0
207
CP-P14/8-1S-A
2 x 4.32
2 x 2.0
29.0
2 x 95.0
CP-P14/8-2S-A
3 2.19
3 1.2
29.0
3 x 48.2
CP-P14/8-3S-A
Winding data and area product (for PTS14/8) for 4-pins P14/8 coil former for PCB mounting
NUMBER
OF
SECTIONS
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH
OF TURN
(mm)
LENGTH
OF PINS
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
8.65
4.4
29.0
4.4
190
TYPE NUMBER
CPV-P14/8-1S-4SPD
8.65
4.4
29.0
6.8
190
CPV-P14/8-1S-4SPDL
2 3.87
2 2.0
29.0
4.4
2 x 85.1
CPV-P14/8-2S-4SPD
2 3.87
2 2.0
29.0
6.8
2 x 85.1
CPV-P14/8-2S-4SPDL
Winding data and area product (for PTS14/8) for 6-pins P14/8 coil former for PCB mounting
NUMBER
OF
SECTIONS
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH
OF TURN
(mm)
LENGTH
OF PINS
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
8.65
4.4
29.0
4.4
190
TYPE NUMBER
CPV-P14/8-1S-6PD
8.65
4.4
29.0
6.8
190
CPV-P14/8-1S-6PDL
2 3.87
2 2.0
29.0
4.4
2 x 85.1
CPV-P14/8-2S-6PD
2 3.87
2 2.0
29.0
6.8
2 x 85.1
CPV-P14/8-2S-6PDL
2013 Jul 31
684
Ferroxcube
PT18/11
(1811TS)
18.0 0.4
handbook, halfpage
PARAMETER
15.15 0.25
VALUE
10.5 min.
UNIT
(I/A)
0.670
mm1
Ve
effective volume
1110
mm3
Ie
effective length
27.2
mm
Ae
effective area
40.6
mm2
Amin
minimum area
32.9
mm2
mass of set
6.0
11.94
0.2
3.8 0.6
7.4 0.15
3.1 0.075
7.4
0.2
10.6
0.15
CBW111
Dimensions in mm.
3C91
3F3
2013 Jul 31
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
100 3%
53
660
160 3%
85
380
PT18/11-3C81-A160
250 3%
133
220
PT18/11-3C81-A250
PT18/11-3C81-A100
315 3%
168
170
PT18/11-3C81-A315
400 5%
213
130
PT18/11-3C81-A400
3130 25%
1670
PT18/11-3C81
3130 25%
PT18/11-3C91
1670
100 3%
53
660
160 3%
85
380
PT18/11-3F3-A160
250 3%
133
220
PT18/11-3F3-A250
PT18/11-3F3-A100
315 3%
168
170
PT18/11-3F3-A315
400 5%
213
130
PT18/11-3F3-A400
2500 25%
1340
685
PT18/11-3F3
Ferroxcube
PT18/11
(1811TS)
AIR GAP
(m)
TYPE NUMBER
5760 25%
3 075
PT18/11-3E27
GRADE
3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C81
320
0.23
3C91
320
3F3
315
0.12
GRADE
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
0.06(1)
0.5 (1)
0.21
Note
1. Measured at 60 C.
BOBBINS AND ACCESSORIES
Coil formers, winding data and mounting parts are equal to those of P18/11 , but area product is different.
Winding data and area product (for PT18/11) for CP-P18/11 coil former
NUMBER OF
SECTIONS
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
17.1
5.7
36.6
694
CP-P18/11-1S
2 7.95
2 2.65
36.6
2 x 323
CP-P18/11-2S
3 4.95
3 1.6
36.6
3 x 201
CP-P18/11-3S
TYPE NUMBER
Winding data and area product (for PT18/11) for 6-pins P18/11 coil former for PCB mounting
NUMBER
OF
SECTIONS
MINIMUM
WINDING
AREA
(mm 2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
LENGTH
OF PINS
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
16.8
6.0
36.7
4.4
682
16.8
6.0
36.7
6.8
682
CPV-P18/11-1S-6PDL
2 7.61
2 2.8
36.7
4.4
2 x 309
CPV-P18/11-2S-6PD
TYPE NUMBER
CPV-P18/11-1S-6PD
2 7.61
2 2.8
36.7
6.8
2 x 309
CPV-P18/11-2S-6PDL
3 4.58
3 1.7
36.7
4.4
3 x 186
CPV-P18/11-3S-6PD
3 4.58
3 1.7
36.7
6.8
3 x 186
CPV-P18/11-3S-6PDL
2013 Jul 31
686
Ferroxcube
PTS18/11
(1811THS)
PARAMETER
18.0 0.4
handbook, halfpage
VALUE
15.15 0.25
UNIT
(I/A)
0.770
mm1
Ve
effective volume
1070
mm3
Ie
effective length
28,7
mm
Ae
effective area
37.2
mm2
Amin
minimum area
31.0
mm2
mass of set
5.0
10.5 min.
11.94
0.2
7.4 0.15
3.1 0.075
7.4
0.2
10.6
0.15
CBW112
Dimensions in mm.
3C91
3F3
2013 Jul 31
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
100 3%
61
600
160 3%
98
340
PTS18/11-3C81-A160
250 3%
153
200
PTS18/11-3C81-A250
PTS18/11-3C81-A100
315 3%
193
150
PTS18/11-3C81-A315
400 5%
245
120
PTS18/11-3C81-A400
3000 25%
1830
PTS18/11-3C81
3000 25%
PTS18/11-3C91
1830
100 3%
61
600
160 3%
98
340
PTS18/11-3F3-A160
250 3%
153
200
PTS18/11-3F3-A250
PTS18/11-3F3-A100
315 3%
193
150
PTS18/11-3F3-A315
400 5%
245
120
PTS18/11-3F3-A400
2225 25%
1365
687
PTS18/11-3F3
Ferroxcube
PTS18/11
(1811THS)
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
5140 25%
3150
PTS18/11-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C81
320
0.22
3C91
320
3F3
315
0.12
GRADE
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
0.055(1)
0.4 (1)
0.2
Note
1. Measured at 60 C.
BOBBINS AND ACCESSORIES
Coil formers, winding data and mounting parts are equal to those of P18/11 , but area product is different.
Winding data and area product (for PTS18/11) for CP-P18/11 coil former
NUMBER OF
SECTIONS
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
17.1
5.7
36.6
636
CP-P18/11-1S
2 7.95
2 2.65
36.6
2 x 296
CP-P18/11-2S
3 4.95
3 1.6
36.6
3 x 184
CP-P18/11-3S
TYPE NUMBER
Winding data and area product (for PTS18/11) for 6-pins P18/11 coil former for PCB mounting
NUMBER
OF
SECTIONS
MINIMUM
WINDING
AREA
(mm 2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
LENGTH
OF PINS
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
16.8
6.0
36.7
4.4
625
16.8
6.0
36.7
6.8
625
CPV-P18/11-1S-6PDL
2 7.61
2 2.8
36.7
4.4
2 x 283
CPV-P18/11-2S-6PD
TYPE NUMBER
CPV-P18/11-1S-6PD
2 7.61
2 2.8
36.7
6.8
2 x 283
CPV-P18/11-2S-6PDL
3 4.58
3 1.7
36.7
4.4
3 x 170
CPV-P18/11-3S-6PD
3 4.58
3 1.7
36.7
6.8
3 x 170
CPV-P18/11-3S-6PDL
2013 Jul 31
688
Ferroxcube
PT23/11
(2311TS)
PARAMETER
VALUE
(I/A)
0.470
mm1
Ve
effective volume
1740
mm3
Ie
effective length
28.6
mm
Ae
effective area
61.0
mm2
Amin
minimum area
53.6
mm2
mass of set
10.5
13.2 min
handbook, halfpage
UNIT
15.2
18.3
22.9
0.25 0.35 0.45
9.7 0.2
5.1 0.1
7.5
11
0.25 0.25
MGB577
Dimensions in mm.
3C91
3F3
AL
(nH)
TYPE NUMBER
160 3%
60
580
250 3%
93
350
PT23/11-3C81-A250
315 3%
118
270
PT23/11-3C81-A315
PT23/11-3C81-A160
400 3%
149
200
PT23/11-3C81-A400
630 5%
235
120
PT23/11-3C81-A630
5500 25%
2050
PT23/11-3C81
5500 25%
PT23/11-3C91
2050
160 3%
60
580
250 3%
93
350
PT23/11-3F3-A250
315 3%
118
270
PT23/11-3F3-A315
PT23/11-3F3-A160
400 3%
149
200
PT23/11-3F3-A400
630 5%
235
120
PT23/11-3F3-A630
1380
3700 25%
2013 Jul 31
AIR GAP
(m)
689
PT23/11-3F3
Ferroxcube
PT23/11
(2311TS)
AIR GAP
(m)
8400 25%
3130
GRADE
3E27
TYPE NUMBER
PT23/11-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C81
320
0.4
3C91
320
3F3
315
0.19
GRADE
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
0.09(1)
0.7 (1)
0.33
Note
1. Measured at 60 C.
2013 Jul 31
690
Ferroxcube
PT23/11
(2311TS)
SPECIFICATION
Pin material
Solderability
8 max
1.1
3.8
5.16
23.24 10.03
max min
11.28 17.78
max
20.32
5.2
min
19.56 max
9.4 max
MGB615
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
15.1
5.2
45.2
921
2013 Jul 31
691
TYPE NUMBER
CPV-PT23/11-1S-10P
Ferroxcube
PTS23/11
(2311THS)
PARAMETER
22.9 0.45
handbook, halfpage
VALUE
18.3 0.35
UNIT
(I/A)
0.550
mm1
Ve
effective volume
1810
mm3
Ie
effective length
31.6
mm
Ae
effective area
57.2
mm2
Amin
minimum area
53.6
mm2
mass of set
9.0
13.2 min
15.2
0.25
9.7 0.2
5.1 0.1
7.5
11
0.25 0.25
MGB579
Dimensions in mm.
3C91
3F3
AL
(nH)
TYPE NUMBER
160 3%
70
540
PTS23/11-3C81-A160
250 3%
110
320
PTS23/11-3C81-A250
315 3%
138
250
PTS23/11-3C81-A315
400 3%
175
190
PTS23/11-3C81-A400
630 5%
276
110
PTS23/11-3C81-A630
4890 25%
2150
PTS23/11-3C81
4890 25%
PTS23/11-3C91
2150
160 3%
70
540
PTS23/11-3F3-A160
250 3%
110
320
PTS23/11-3F3-A250
315 3%
138
250
PTS23/11-3F3-A315
400 3%
175
190
PTS23/11-3F3-A400
630 5%
276
110
PTS23/11-3F3-A630
1510
3280 25%
2013 Jul 31
AIR GAP
(m)
692
PTS23/11-3F3
Ferroxcube
PTS23/11
(2311THS)
AL
(nH)
AIR GAP
(m)
7250 25%
3190
TYPE NUMBER
PTS23/11-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C81
320
0.37
3C91
320
3F3
315
0.2
GRADE
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
0.09(1)
0.7 (1)
0.35
Note
1. Measured at 60 C.
BOBBINS AND ACCESSORIES
Coil formers, winding data and mounting parts are equal to those of PT23/11, but area product is different.
Winding data and area product (for PTS23/11) for 10-pins PT23/11 coil former
NUMBER OF
SECTIONS
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
15.1
5.2
45.2
864
2013 Jul 31
693
TYPE NUMBER
CPV-PT23/11-1S-10P
Ferroxcube
PT23/18
(2318TS)
PARAMETER
13.2 min
handbook, halfpage
VALUE
UNIT
(I/A)
0.670
mm1
Ve
effective volume
2590
mm3
Ie
effective length
41.6
mm
Ae
effective area
62.2
mm2
Amin
minimum area
53.6
mm2
mass of set
14
15.2
18.3
22.9
0.25 0.35 0.45
9.7 0.2
5.1 0.1
14.4
18
0.35 0.35
Dimensions in mm.
MGB578
3C91
3F3
AL
(nH)
TYPE NUMBER
160 3%
85
620
PT23/18-3C81-A160
250 3%
133
360
PT23/18-3C81-A250
315 3%
168
270
PT23/18-3C81-A315
400 3%
213
200
PT23/18-3C81-A400
630 5%
335
120
4100 25%
2 180
4100 25%
PT23/18-3C81-A630
PT23/18-3C81
2 180
160 3%
85
620
PT23/18-3F3-A160
250 3%
133
360
PT23/18-3F3-A250
315 3%
168
270
PT23/18-3F3-A315
400 3%
213
200
PT23/18-3F3-A400
630 5%
335
120
1 460
2750 25%
2013 Jul 31
AIR GAP
(m)
694
PT23/18-3C91
PT23/18-3F3-A630
PT23/18-3F3
Ferroxcube
PT23/18
(2318TS)
AIR GAP
(m)
6 400 25%
3 410
GRADE
3E27
TYPE NUMBER
PT23/18-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C81
320
0.6
3C91
320
3F3
315
0.29
GRADE
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
0.13(1)
1.0 (1)
0.49
Note
1. Measured at 60 C.
2013 Jul 31
695
Ferroxcube
PT23/18
(2318TS)
SPECIFICATION
Pin material
Solderability
23.24
max
13.46 max
1.1
3.8
10
min
11.76
20.3
11.3
5.2
min
23.1 max
14.86 max
17.8
max
MGB616
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
36.0
11.8
45.2
2240
2013 Jul 31
696
TYPE NUMBER
CPV-PT23/18-1S-10P
Ferroxcube
PTS23/18
(2318THS)
SYMBOL
PARAMETER
22.9 0.45
handbook, halfpage
18.3 0.35
UNIT
(I/A)
0.770
mm1
Ve
effective volume
2630
mm3
Ie
effective length
45.1
mm
Ae
effective area
58.3
mm2
Amin
minimum area
53.6
mm2
mass of set
13
13.2 min
15.2
0.25
9.7 0.2
5.1 0.1
14.4
18
0.35 0.35
MGB580
Dimensions in mm.
3C91
3F3
AL
(nH)
TYPE NUMBER
160 3%
98
570
PTS23/18-3C81-A160
250 3%
154
330
PTS23/18-3C81-A250
315 3%
194
250
PTS23/18-3C81-A315
400 3%
246
190
PTS23/18-3C81-A400
630 5%
387
110
PTS23/18-3C81-A630
3800 25%
2320
PTS23/18-3C81
3800 25%
PTS23/18-3C91
2320
160 3%
98
570
PTS23/18-3F3-A160
250 3%
154
330
PTS23/18-3F3-A250
315 3%
194
250
PTS23/18-3F3-A315
400 3%
246
190
PTS23/18-3F3-A400
630 5%
387
110
PTS23/18-3F3-A630
1500
2 500 25%
2013 Jul 31
AIR GAP
(m)
697
PTS23/18-3F3
Ferroxcube
PTS23/18
(2318THS)
AL
(nH)
AIR GAP
(m)
5945 25%
3 630
TYPE NUMBER
PTS23/18-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C81
320
0.54
3C91
320
3F3
315
0.29
GRADE
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
0.14(1)
1.0 (1)
0.5
Note
1. Measured at 60 C.
BOBBINS AND ACCESSORIES
Coil formers, winding data and mounting parts are equal to those of PT23/18, but area product is different.
Winding data and area product (for PTS23/18) for 10-pins PT23/18 coil former
NUMBER OF
SECTIONS
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
36.0
11.8
45.2
2100
2013 Jul 31
698
TYPE NUMBER
CPV-PT23/18-1S-10P
Ferroxcube
PTS30/19/I
CORE SETS
30 0.5
PARAMETER
25.4 0.4
VALUE
UNIT
(I/A)
0.412
mm1
Ve
effective volume
5940
mm3
Ie
effective length
49.5
mm
Ae
effective area
120
mm2
Amin
minimum area
111
mm2
mass of set
31
17.8 min
20.3
0.25
13.3 0.2
13.2
0.2
18.8
0.2
MFP058
Dimensions in mm.
AL
(nH)
3C92
3830 25 %
1260
PTS30/19/I-3C92
3C94
5400 25 %
1770
PTS30/19/I-3C94
3C96
4840 25 %
1590
PTS30/19/I-3C96
GRADE
TYPE NUMBER
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
3C92
320
0.53
3.5
3C94
320
0.53
3.5
3C96
315
0.4
2.7
2.2
2013 Jul 31
699
Ferroxcube
PTS34/19/I
CORE SETS
33.5 + 0.3
0.5
27 + 0.3
0.5
17 min
PARAMETER
VALUE
UNIT
(I/A)
0.339
mm1
Ve
effective volume
8140
mm3
Ie
effective length
52.5
mm
Ae
effective area
155
mm2
Amin
minimum area
145
mm2
mass of set
46
24
0.3
13.85 0.25
13.4
0.2
Dimensions in mm.
19.4
0.2
MFP059
AL
(nH)
3C92
4770 25 %
1290
PTS34/19/I-3C92
3C94
6800 25 %
1830
PTS34/19/I-3C94
3C96
6070 25 %
1640
PTS34/19/I-3C96
GRADE
TYPE NUMBER
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
3C92
320
0.8
4.9
3C94
320
0.8
4.9
3C96
315
0.6
3.7
3.0
2013 Jul 31
700
Ferroxcube
PTS40/27/I
CORE SETS
39.8 + 0.2
0.7
33.2 + 0.2
0.6
20 min
PARAMETER
VALUE
UNIT
(I/A)
0.346
mm1
Ve
effective volume
14400
mm3
Ie
effective length
70.5
mm
Ae
effective area
204
mm2
Amin
minimum area
201
mm2
mass of set
66
28.3
0.35
16 0.25
19.7
0.3
26.9
0.2
MFP060
Dimensions in mm.
AL
(nH)
3C92
4740 25 %
1300
PTS40/27/I-3C92
3C94
6800 25 %
1870
PTS40/27/I-3C94
3C96
6060 25 %
1670
PTS40/27/I-3C96
GRADE
TYPE NUMBER
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
3C92
320
1.5
8.6
3C94
320
1.5
8.6
3C96
315
1.1
6.5
5.4
2013 Jul 31
701
Ferroxcube
Soft Ferrites
PH cores
handbook, halfpage
CBW363
2013 Jul 31
702
Ferroxcube
Soft Ferrites
PH cores
PH 5.6/3.6 3D3 X
ewidth
CORE TYPE
PH5.6/3.6
0.2
PH7.4/3.9
0.4
PH9.4/4.8
0.7
PH14/7.5
PH26/9.2
12
special version
core material
core size
core type
CBW115
2013 Jul 31
703
Ferroxcube
PH cores
PH5.6/3.6
CORE HALF
Ordering information
GRADE
3D3
handbook, halfpage
TYPE NUMBER
PH5.6/3.6-3D3
0.35
4.5 0
0
2.5 0.1
1.5
0.15
;;;;
;;;;
;;;;
;;;;
0
5.75 0.35
4 0.2
0.1
0.95 0
0
0.25 3.6 0.25
2.8 0
Dimensions in mm.
2013 Jul 31
704
MGC201
Ferroxcube
PH cores
PH7.4/3.9
CORE HALF
Ordering information
GRADE
3D3
TYPE NUMBER
handbook, halfpage
PH7.4/3.9-3D3
0.25
0.3
1.6
0
0
0
0.12
;;;;
;;;;
;;;;
;;;;
7.4
0
0.3
5.7 0.4
0.1
1.38 0
0
0.2 3.95 0.3
2.8 0
Dimensions in mm.
2013 Jul 31
705
MGC205
Ferroxcube
PH cores
PH9.4/4.8
CORE HALF
Ordering information
GRADE
3D3
TYPE NUMBER
handbook, halfpage
PH9.4/4.8-3D3
0.35
7.5 0
0
3.9 0.2
2
0.2
;;;;
;;;;
;;;;
;;;;
0
9.4 0.4
6.5 0.3
0.1
2 0
0
0.3 4.8 0.4
3.55 0
Dimensions in mm.
2013 Jul 31
706
MGC203
Ferroxcube
PH cores
PH14/7.5
CORE HALF
Ordering information
GRADE
3D3
handbook, halfpage
TYPE NUMBER
3.3
0.6
PH14/7.5-3D3
0
0
6 0.2 14.4 0.6
0.5
11.6 0
9.5 0.3
;;;;
;;;;
0.8
0 0
0.2
0.4 0
0.1
3 0
0
0.3 7.5 0.2
5.6 0
MGC207
Dimensions in mm.
2013 Jul 31
707
Ferroxcube
PH cores
PH26/9.2
CORE HALF
Ordering information
GRADE
3D3
TYPE NUMBER
handbook, halfpage
PH26/9.2-3D3
3.8
0.6
0
11.5 0.4
0.8
21.2 0
25.5
0.5
18 0.4
;;;;
;;;;
0.8
0 0
0.4
0.5 0
0.2
5.4 0
0
0.4 9.2 0.45
5.9 0
MGC209
Dimensions in mm.
2013 Jul 31
708
Ferroxcube
Soft Ferrites
2013 Jul 31
709
Ferroxcube
Soft Ferrites
PM cores
MFP063
2013 Jul 31
710
Ferroxcube
Soft Ferrites
PM cores
PM 114/93 3C94
MASS
(g)
CORE TYPE
Ve
(mm3)
PM74/59
101000
790
460
PM87/70
133000
910
770
PM114/93
344000
1720
1940
core type
core size
core material
MFP064
2013 Jul 31
711
Ferroxcube
PM cores
PM74/59
CORE SETS
74 0
2.5
PARAMETER
VALUE
57.5 + 1.8
0
UNIT
mm1
(I/A)
0.162
Ve
effective volume
101000 mm3
Ie
effective length
128
mm
Ae
effective area
790
mm2
Amin
minimum area
630
mm2
mass of set
460
2.5
+ 0.4
0
< 32.4
4 + 0.4
0
> 34
5.4 + 0.3
0
29.5 0
1
40.7
+ 0.8
59 0
0
0.6
MFP145
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
14000 25 %
1800
PM74/59-3C90
3C94
14000 25 %
1800
PM74/59-3C94
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C90
320
12
3C94
320
9.6
GRADE
2013 Jul 31
712
f = 100 kHz;
= 100 mT;
B
T = 100 C
Ferroxcube
PM cores
PM87/70
CORE SETS
Effective core parameters
SYMBOL
0
3
67.1 + 2.1
0
87
PARAMETER
VALUE
UNIT
mm1
(I/A)
0.161
Ve
effective volume
133000 mm3
Ie
effective length
146
mm
Ae
effective area
910
mm2
Amin
minimum area
700
mm2
mass of set
770
41 1.5
13
35 1
5 0
0.4
8.5 + 0.3
0
31.7 0
1
48
+ 0.8 70 0
0.8
0
MFP052
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
15000 25 %
1770
PM87/70-3C90
3C94
15000 25 %
1770
PM87/70-3C94
GRADE
B (mT) at
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C90
320
20
3C94
315
16
2013 Jul 31
713
Ferroxcube
PM cores
PM114/93
CORE SETS
114 0
4.5
88 + 3.7
0
PARAMETER
VALUE
UNIT
53.5 1.5
mm1
(I/A)
0.116
Ve
effective volume
344000 mm3
Ie
effective length
200
mm
Ae
effective area
1720
mm2
Amin
minimum area
1380
mm2
mass of set
1940
20
44 1
5.3 0
+ 0.4
5.4 + 0.4
0
43
0
1.4
63
+ 1.6 93 0
1
0
MFP053
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
20000 25 %
1850
PM114/93-3C90
3C94
20000 25 %
1850
PM114/93-3C94
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 100 mT;
B
T = 100 C
3C90
320
12
3C94
315
GRADE
2013 Jul 31
714
Ferroxcube
Soft Ferrites
2013 Jul 31
715
Ferroxcube
Soft Ferrites
MFP227
2013 Jul 31
716
Ferroxcube
Soft Ferrites
Ve
(mm3)
Ae
(mm 2)
PQ20/16
2330
61.9
13
PQ20/20
2850
62.6
16
PQ26/20
5820
121
30
PQ26/25
6530
120
36
PQ32/20
9440
169
43
PQ32/30
12 500
167
57
PQ35/35
16 300
190
73
PQ40/40
20500
201
97
PQ50/50
37100
328
195
special version
AL value (nH)
gap type:
A unsymmetrical gap to AL value
E symmetrical gap to AL value
core material
core size
core type
CBW117
C P V PQ20/16 1S 14P
number and type of pins:
D dual termination
F flat
L long
number of sections
associated core type
mounting orientation: V vertical
plastic material type: P thermoplastic
S thermoset
coil former (bobbin)
CBW118
2013 Jul 31
717
Ferroxcube
PQ20/16
CORE SETS
SYMBOL
PARAMETER
21.3 0.4
handbook, halfpage
12 min
4
min
UNIT
(I/A)
0.607
mm1
Ve
effective volume
2330
mm3
Ie
effective length
37.6
mm
Ae
effective area
61.9
mm2
Amin
minimum area
59.1
mm2
mass of set
13
7.9
min
;;;;
;;;;
;;;;
;;;;
14
0.4
8.8
0.2
10.3
0.3
18 0.4
16.2
0.2
MBE693
Dimensions in mm.
AL
(nH)
TYPE NUMBER
160 3%
77
600
PQ20/16-3C81-A160
250 3%
121
350
PQ20/16-3C81-A250
315 3%
152
270
PQ20/16-3C81-A315
400 3%
193
200
PQ20/16-3C81-A400
630 5%
305
120
1970
160 3%
77
600
PQ20/16-3C90-A160
250 3%
121
350
PQ20/16-3C90-A250
315 3%
152
270
PQ20/16-3C90-A315
400 3%
193
200
PQ20/16-3C90-A400
4 080 25%
3C90
AIR GAP
(m)
630 5%
PQ20/16-3C81-A630
PQ20/16-3C81
305
120
3 600 25%
1740
PQ20/16-3C90
3C91
4080 25%
1970
PQ20/16-3C91
3C94
3 600 25%
1740
PQ20/16-3C94
3C95
4080 25%
1970
PQ20/16-3C95
3C96
3 250 25%
1570
PQ20/16-3C96
2013 Jul 31
718
PQ20/16-3C90-A630
Ferroxcube
AL
(nH)
GRADE
3F3
PQ20/16
AIR GAP
(m)
TYPE NUMBER
160 3%
77
600
PQ20/16-3F3-A160
250 3%
121
350
PQ20/16-3F3-A250
315 3%
152
270
PQ20/16-3F3-A315
400 3%
193
200
PQ20/16-3F3-A400
305
120
1490
630 5%
3 080 25%
PQ20/16-3F3-A630
PQ20/16-3F3
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
3C81
320
0.54
3C90
320
0.28
0.3
3C91
320
0.16(1)
1.1(1)
3C94
320
0.22
1.4
3C95
320
1.37
1.3
3C96
340
0.16
1.1
0.43
0.9
3F3
320
0.26
0.44
Note
1. Measured at 60 C.
2013 Jul 31
719
Ferroxcube
PQ20/16
COIL FORMER
General data 14-pins PQ20/16 coil former
PARAMETER
SPECIFICATION
Pin material
Solderability
23.15 max
17.9 max
17.35 max
9.8 max
7.82
ref
2.5 (6x)
2.54
10.8
23.15
max 20.3
20.3
9
min
0.6
2.4
min
5.1
7.35
min
3.8
(4x)
MGB608
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm 2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
23.5
7.95
44.0
1450
CPV-PQ20/16-1S-14P
23.5
7.95
44.0
1450
CPV-PQ20/16-1S-14PD
2013 Jul 31
720
TYPE NUMBER
Ferroxcube
PQ20/16
MOUNTING PARTS
General data
ITEM
REMARKS
Clamp
6.4
0.3
1.5
1.6
22.2 max
28.5
0.5
17
7.9
MFW053
Dimensions in mm.
2013 Jul 31
721
TYPE NUMBER
CLM/P-PQ20/16
Ferroxcube
PQ20/20
CORE SETS
SYMBOL
PARAMETER
21.3 0.4
handbook, halfpage
12 min
4
min
UNIT
(I/A)
0.731
mm1
Ve
effective volume
2850
mm3
Ie
effective length
45.7
mm
Ae
effective area
62.6
mm2
Amin
minimum area
59.1
mm2
mass of set
16
7.9
min
14
0.4
;;;;;
;;;;;
;;;;;
;;;;;
20.2
0.2
8.8
0.2
14.3
0.3
18 0.4
MBE692
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
160 3%
93
620
250 3%
145
360
PQ20/20-3C81-A250
315 3%
183
270
PQ20/20-3C81-A315
PQ20/20-3C81-A160
400 3%
232
200
PQ20/20-3C81-A400
630 5%
366
120
PQ20/20-3C81-A630
2080
160 3%
93
620
PQ20/20-3C90-A160
250 3%
145
360
PQ20/20-3C90-A250
3580 25%
3C90
PQ20/20-3C81
315 3%
183
270
PQ20/20-3C90-A315
400 3%
232
200
PQ20/20-3C90-A400
630 5%
366
120
3150 25%
1830
3C91
3580 25%
2080
PQ20/20-3C91
3C94
3150 25%
1830
PQ20/20-3C94
PQ20/20-3C90-A630
PQ20/20-3C90
3C95
3580 25%
2080
PQ20/20-3C95
3C96
2820 25%
1640
PQ20/20-3C96
2013 Jul 31
722
Ferroxcube
PQ20/20
AIR GAP
(m)
160 3%
93
620
PQ20/20-3F3-A160
250 3%
145
360
PQ20/20-3F3-A250
AL
(nH)
GRADE
3F3
TYPE NUMBER
315 3%
183
270
PQ20/20-3F3-A315
400 3%
232
200
PQ20/20-3F3-A400
366
120
1540
630 5%
2650 25%
PQ20/20-3F3-A630
PQ20/20-3F3
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
3C81
320
0.66
3C90
320
0.35
0.37
3C91
320
0.2(1)
1.3(1)
3C94
320
0.27
1.7
3C95
320
1.68
1.6
3C96
340
0.2
1.3
0.53
1.1
3F3
320
0.31
0.54
Note
1. Measured at 60 C.
2013 Jul 31
723
Ferroxcube
PQ20/20
COIL FORMER
General data 14-pins PQ20/20 coil former
PARAMETER
Coil former material
SPECIFICATION
Polyethylene terephtalate (PET), glass-reinforced, flame retardant in
accordance with UL 94V-0; UL file number E41938
Pin material
Solderability
23.15 max
22 max
17.35 max
13.85 max
2.54
12
2.5 (6x)
10.8
23.15
max 20.3
20.3
9
min
0.64
2.4
min
5.1
Dimensions in mm.
7.35
min
3.8
(4x)
MGB611
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
36.0
12.0
44.0
2250
CPV-PQ20/20-1S-14P-Z
36.0
12.0
44.0
2250
CPV-PQ20/20-1S-14PD-Z
2013 Jul 31
724
TYPE NUMBER
Ferroxcube
PQ20/20
MOUNTING PARTS
General data
ITEM
REMARKS
Clamp
6.4
0.3
1.5
1.6
22.2 max
31.5
0.5
21.5
7.9
MFW054
Dimensions in mm.
2013 Jul 31
725
TYPE NUMBER
CLM/P-PQ20/20
Ferroxcube
PQ26/20
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
27.3 0.46
handbook, halfpage
VALUE
15.5 min
6
min
UNIT
(I/A)
0.372
mm1
Ve
effective volume
5470
mm3
Ie
effective length
45.0
mm
Ae
effective area
121
mm2
Amin
minimum area
109
mm2
mass of set
30
10.5
min
19
0.45
;;;;
;;;;
;;;;
12
0.2
11.5 20.2
0.3 0.25
22.5 0.46
MBE691
Dimensions in mm.
3C90
AL
(nH)
250 3%
74
730
315 3%
93
550
PQ26/20-3C81-A315
400 3%
118
420
PQ26/20-3C81-A400
TYPE NUMBER
PQ26/20-3C81-E250
630 3%
186
250
PQ26/20-3C81-A630
1000 5%
296
140
PQ26/20-3C81-A1000
7020 25%
2080
250 3%
74
730
315 3%
93
550
PQ26/20-3C90-A315
400 3%
118
420
PQ26/20-3C90-A400
PQ26/20-3C81
PQ26/20-3C90-E250
630 3%
186
250
PQ26/20-3C90-A630
1000 5%
296
140
PQ26/20-3C90-A1000
6200 25%
1640
PQ26/20-3C90
3C91
7020 25%
2080
PQ26/20-3C91
3C94
6200 25%
1640
PQ26/20-3C94
3C95
7020 25%
2080
PQ26/20-3C95
3C96
5530 25%
1640
PQ26/20-3C96
2013 Jul 31
726
Ferroxcube
AL
(nH)
250 3%
74
730
315 3%
93
550
PQ26/20-3F3-A315
400 3%
118
420
PQ26/20-3F3-A400
GRADE
3F3
PQ26/20
TYPE NUMBER
PQ26/20-3F3-E250
630 3%
186
250
PQ26/20-3F3-A630
1000 5%
296
140
PQ26/20-3F3-A1000
1540
5200 25%
PQ26/20-3F3
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C81
320
1.3
3C90
320
0.66
0.7
3C91
320
0.42(1)
2.5(1)
3C94
320
0.52
3.3
3C95
320
3.23
3.06
3C96
340
0.42
2.5
1.0
3F3
320
0.64
1.1
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C81
320
3C90
320
3C91
320
3C94
320
3C95
320
3C96
340
2.1
3F3
320
GRADE
Note
1. Measured at 60 C.
2013 Jul 31
727
Ferroxcube
PQ26/20
COIL FORMER
General data 12-pins PQ26/20 coil former
ITEM
SPECIFICATION
Pin material
Solderability
26.6 max
21.5 max
21.85 max
11.05 max
2.54
9
14.2
29.75
max 25.4
25.4
12.3
min
0.64
2.4
min
7.6
Dimensions in mm.
MGB609
7.2
min
3.8
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
31.1
9.0
56.4
3760
CPV-PQ26/20-1S-12P-Z
31.1
9.0
56.4
3760
CPV-PQ26/20-1S-12PD-Z
2013 Jul 31
728
TYPE NUMBER
Ferroxcube
PQ26/20
MOUNTING PARTS
General data
ITEM
REMARKS
Clamp
9
0.3
1.5
1.7
28.2 max
32.5
0.5
21
10.5
MFW055
Dimensions in mm.
2013 Jul 31
729
TYPE NUMBER
CLM/P-PQ26/20
Ferroxcube
PQ26/25
CORE SETS
SYMBOL
PARAMETER
27.3 0.46
handbook, halfpage
15.5 min
6
min
UNIT
(I/A)
0.451
mm1
Ve
effective volume
6530
mm3
Ie
effective length
54.3
mm
Ae
effective area
120
mm2
Amin
minimum area
108
mm2
mass of set
36
10.5
min
;;;;
;;;;
;;;;
;;;;
19
0.45
12
0.2
22.5 0.46
16.1 24.7
0.3 0.25
MBE690
Dimensions in mm.
250 3%
90
730
315 3%
113
550
PQ26/25-3C81-A315
400 3%
144
420
PQ26/25-3C81-A400
630 3%
227
240
PQ26/25-3C81-A630
1000 5%
360
140
PQ26/25-3C81-A1000
2160
250 3%
90
730
315 3%
113
550
PQ26/25-3C90-A315
400 3%
144
420
PQ26/25-3C90-A400
630 3%
227
240
PQ26/25-3C90-A630
1000 5%
360
140
5250 25%
1890
PQ26/25-3C90
3C91
6010 25%
2160
PQ26/25-3C91
3C94
5250 25%
1890
PQ26/25-3C94
3C95
6010 25%
2160
PQ26/25-3C95
3C96
4700 25%
1690
PQ26/25-3C96
GRADE
3C81
AL
(nH)
6010 25%
3C90
2013 Jul 31
730
TYPE NUMBER
PQ26/25-3C81-E250
PQ26/25-3C81
PQ26/25-3C90-E250
PQ26/25-3C90-A1000
Ferroxcube
250 3%
90
730
PQ26/25-3F3-E250
315 3%
113
550
PQ26/25-3F3-A315
AL
(nH)
GRADE
3F3
PQ26/25
TYPE NUMBER
400 3%
144
420
PQ26/25-3F3-A400
630 3%
227
240
PQ26/25-3F3-A630
360
140
PQ26/25-3F3-A1000
1574
1000 5%
4390 25%
PQ26/25-3F3
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
3C81
320
1.5
3C90
320
0.79
0.83
3C91
320
0.5(1)
3.2 (1)
3C94
320
0.62
4.0
3C95
320
3.85
3.66
3C96
340
0.5
3.2
1.15
2.5
3F3
320
0.72
1.2
Note
1. Measured at 60 C.
2013 Jul 31
731
Ferroxcube
PQ26/25
COIL FORMER
General data 12-pins PQ26/25 coil former
PARAMETER
SPECIFICATION
Pin material
Solderability
26.05 max
26.6 max
2.54
15.65 max
21.85 max
13.55
14.2
29.75
max 25.4
25.4
12.3
min
0.64
2.4
min
7.6
MGB612
7.2
min
3.8
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
47.5
13.6
56.4
5700
CPV-PQ26/25-1S-12P-Z
47.5
13.6
56.4
5700
CPV-PQ26/25-1S-12PD-Z
2013 Jul 31
732
TYPE NUMBER
Ferroxcube
PQ26/25
MOUNTING PARTS
General data
ITEM
REMARKS
Clamp
9
0.4
1.5
1.7
28.2 max
36.8
0.5
25.4
0.25
10.5
MFW056
Dimensions in mm.
2013 Jul 31
733
TYPE NUMBER
CLM/P-PQ26/25
Ferroxcube
PQ32/20
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
(I/A)
0.331
mm1
Ve
effective volume
9440
mm3
Ie
effective length
55.9
mm
Ae
effective area
169
mm2
Amin
minimum area
142
mm2
mass of set
43
33 0.5
handbook, halfpage
UNIT
19 min
5.5
min
11.6
min
;;;;
;;;;
;;;;
22
0.5
13.5
0.25
27.5 0.5
11.5 20.6
0.3 0.25
MBE689
Dimensions in mm.
AL
(nH)
TYPE NUMBER
315 3%
83
790
PQ32/20-3C81-E315
400 3%
105
600
PQ32/20-3C81-A400
630 3%
166
350
PQ32/20-3C81-A630
1 000 3%
263
210
PQ32/20-3C81-A1000
421
120
PQ32/20-3C81-A1600
1 990
1 600 5%
7 560 25%
3C90
PQ32/20-3C81
315 3%
83
790
PQ32/20-3C90-E315
400 3%
105
600
PQ32/20-3C90-A400
630 3%
166
350
PQ32/20-3C90-A630
1 000 3%
263
210
PQ32/20-3C90-A1000
PQ32/20-3C90-A1600
1 600 5%
421
120
6 800 25%
1790
PQ32/20-3C90
3C91
7 560 25%
1 990
PQ32/20-3C91
3C94
6 800 25%
1790
PQ32/20-3C94
3C95
7 560 25%
1 990
PQ32/20-3C95
3C96
6 000 25%
1 580
PQ32/20-3C96
2013 Jul 31
734
Ferroxcube
AL
(nH)
GRADE
3F3
PQ32/20
TYPE NUMBER
315 3%
83
790
PQ32/20-3F3-E315
400 3%
105
600
PQ32/20-3F3-A400
630 3%
166
350
PQ32/20-3F3-A630
1 000 3%
263
210
PQ32/20-3F3-A1000
421
120
1 580
1 600 5%
6 000 25%
PQ32/20-3F3-A1600
PQ32/20-3F3
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
3C81
320
1.9
3C90
320
1.2
1.3
3C91
320
4.4(1)
3C94
320
5.5
3C95
320
5.57
5.29
3C96
340
4.4
1.7
3.5
3F3
320
1.8
0.7(1)
0.9
0.7
1.0
Note
1. Measured at 60 C.
2013 Jul 31
735
Ferroxcube
PQ32/20
COIL FORMER
General data 12-pins PQ32/20 coil former
PARAMETER
SPECIFICATION
Pin material
Solderability
32.15 max
22.35 max
26.7 max
11.05 max
2.54
8.9
15.9
34.3
max 30.5
30.5
13.85
min
0.64
2.8
min
7.6
7.2
min
5.1
Dimensions in mm.
MGB610
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
44.8
8.9
66.7
7570
CPV-PQ32/20-1S-12P-Z
44.8
8.9
66.7
7570
CPV-PQ32/20-1S-12PD-Z
2013 Jul 31
736
TYPE NUMBER
Ferroxcube
PQ32/20
MOUNTING PARTS
General data
ITEM
REMARKS
Clamp
10.6
0.4
1.7
2.7
34.1 max
33.5
0.5
21.5
12.3
MFW057
Dimensions in mm.
2013 Jul 31
737
TYPE NUMBER
CLM/P-PQ32/20
Ferroxcube
PQ32/30
CORE SETS
SYMBOL
PARAMETER
33 0.5
handbook, halfpage
19 min
5.5
min
UNIT
(I/A)
0.447
mm1
Ve
effective volume
12 500
mm3
Ie
effective length
74.7
mm
Ae
effective area
167
mm2
Amin
minimum area
142
mm2
mass of set
57
11.6
min
22
0.5
;;;;;
;;;;;
;;;;;
;;;;;
13.5
0.25
21.3 30.3
0.3 0.25
27.5 0.5
MBE688
Dimensions in mm.
AL
(nH)
TYPE NUMBER
315 3%
112
800
PQ32/30-3C81-E315
400 3%
142
600
PQ32/30-3C81-A400
630 3%
224
350
PQ32/30-3C81-A630
1 000 3%
356
200
PQ32/30-3C81-A1000
1600 5%
570
110
2340
315 3%
112
800
PQ32/30-3C90-E315
400 3%
142
600
PQ32/30-3C90-A400
630 3%
224
350
PQ32/30-3C90-A630
1 000 3%
356
200
PQ32/30-3C90-A1000
1600 5%
570
110
5 600 25%
1990
PQ32/30-3C90
3C91
6 570 25%
2340
PQ32/30-3C91
3C94
5 600 25%
1990
PQ32/30-3C94
3C95
6 570 25%
2340
PQ32/30-3C95
3C96
5 040 25%
1790
PQ32/30-3C96
3C81
6 570 25%
3C90
2013 Jul 31
738
PQ32/30-3C81-A1600
PQ32/30-3C81
PQ32/30-3C90-A1600
Ferroxcube
AL
(nH)
GRADE
3F3
PQ32/30
TYPE NUMBER
315 3%
112
800
PQ32/30-3F3-E315
400 3%
142
600
PQ32/30-3F3-A400
630 3%
224
350
PQ32/30-3F3-A630
1 000 3%
356
200
PQ32/30-3F3-A1000
1600 5%
570
110
1630
4 580 25%
PQ32/30-3F3-A1600
PQ32/30-3F3
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
3C81
320
2.6
3C90
320
1.5
1.6
3C91
320
0.9 (1)
6.0(1)
3C94
320
1.2
7.5
3C95
320
7.88
7.5
3C96
340
0.9
6.0
2.3
4.7
3F3
320
1.4
2.4
Note
1. Measured at 60 C.
2013 Jul 31
739
Ferroxcube
PQ32/30
COIL FORMER
General data 12-pins PQ32/30 coil former
PARAMETER
Coil former material
SPECIFICATION
Polyethylene terephtalate (PET), glass-reinforced, flame retardant in
accordance with UL 94V-0; UL file number E41938
Pin material
Solderability
32.15 max
32.15 max
26.7 max
20.85 max
2.54
18.7
15.9
34.3
max 30.5
30.5
13.85
min
0.64
2.8
min
7.6
Dimensions in mm.
7.2
min
5.1
MGB613
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
53.0
18.7
66.7
8850
CPV-PQ32/30-1S-12P-Z
53.0
18.7
66.7
8850
CPV-PQ32/30-1S-12PD-Z
2013 Jul 31
740
TYPE NUMBER
Ferroxcube
PQ32/30
MOUNTING PARTS
General data
ITEM
REMARKS
Clamp
10.6
0.4
1.7
2.5
34.1 max
46.5
0.5
31.8
12.3
MFW058
Dimensions in mm.
2013 Jul 31
741
TYPE NUMBER
CLM/P-PQ32/30
Ferroxcube
PQ35/35
CORE SETS
SYMBOL
PARAMETER
36.1 0.6
handbook, halfpage
23.5 min
6
min
UNIT
(I/A)
0.454
mm1
Ve
effective volume
16 300
mm3
Ie
effective length
86.1
mm
Ae
effective area
190
mm2
Amin
minimum area
162
mm2
mass of set
73
11.8
min
26
0.5
;;;;;
;;;;;
;;;;;
;;;;;
14.4
0.25
34.7
25
0.3 0.25
32 0.5
MBE687
Dimensions in mm.
AL
(nH)
TYPE NUMBER
315 3%
114
920
PQ35/35-3C81-E315
400 3%
144
690
PQ35/35-3C81-E400
630 3%
227
400
PQ35/35-3C81-A630
1 000 3%
361
230
PQ35/35-3C81-A1000
1 600 5%
577
120
6000 25%
2160
315 3%
114
920
PQ35/35-3C90-E315
400 3%
144
690
PQ35/35-3C90-E400
630 3%
227
400
PQ35/35-3C90-A630
1 000 3%
361
230
PQ35/35-3C90-A1000
1 600 5%
577
120
5200 25%
1880
PQ35/35-3C90
3C91
6000 25%
2160
PQ35/35-3C91
3C94
5200 25%
1880
PQ35/35-3C94
3C81
3C90
PQ35/35-3C81-A1600
PQ35/35-3C81
PQ35/35-3C90-A1600
3C95
6000 25%
2160
PQ35/35-3C95
3C96
4 700 25%
1700
PQ35/35-3C96
2013 Jul 31
742
Ferroxcube
AL
(nH)
GRADE
3F3
PQ35/35
TYPE NUMBER
315 3%
114
920
PQ35/35-3F3-E315
400 3%
144
690
PQ35/35-3F3-E400
630 3%
227
400
PQ35/35-3F3-A630
1 000 3%
361
230
PQ35/35-3F3-A1000
1 600 5%
577
120
1650
4 570 25%
PQ35/35-3F3-A1600
PQ35/35-3F3
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
3C81
320
3.8
3C90
320
2.0
2.1
3C91
320
1.2(1)
8.0(1)
3C94
320
1.6
10
3C95
320
10.3
9.78
3C96
340
1.2
8.0
3.0
6.1
3F3
320
1.8
3.1
Note
1. Measured at 60 C.
2013 Jul 31
743
Ferroxcube
PQ35/35
COIL FORMER
General data 12-pins PQ35/35 coil former
PARAMETER
SPECIFICATION
Pin material
Solderability
35.5 max
37.6 max
31.4
9.6 (2x)
24.65
35.5
39.1 35.5
14.7
9.6
5.3 min
19.8
30
5.1 (8x)
MFP180
Dimensions in mm.
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
152
20.8
75
2013 Jul 31
744
TYPE NUMBER
CPV-PQ35/35-1S-12P-Z
Ferroxcube
PQ35/35
MOUNTING PARTS
General data
ITEM
REMARKS
Clamp
11.3 (2x)
1.7 (4x)
0.5
3 (4x)
2.7
0.2
37.7 max
50.5
0.5
36
13
MFP181
Dimensions in mm.
2013 Jul 31
745
TYPE NUMBER
CLM/P-PQ35/35
Ferroxcube
PQ40/40
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
41.5 0.9
handbook, halfpage
VALUE
28 min
6.05
min
UNIT
(I/A)
0.507
mm1
Ve
effective volume
20500
mm3
Ie
effective length
102
mm
Ae
effective area
201
mm2
Amin
minimum area
175
mm2
mass of set
97
15
min
28
0.6
29.5
0.4
39.8
0.3
14.9
0.3
37 0.6
MFP023
Dimensions in mm.
GRADE
AIR GAP
(m)
TYPE NUMBER
3C91
6100 25 %
2460
PQ40/40-3C91
3C94
4900 25 %
1980
PQ40/40-3C94
3C95
6100 25 %
2460
PQ40/40-3C95
3C96
4200 25 %
1690
PQ40/40-3C96
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
3C91
320
1.65(1)
10(1)
3C94
320
2.1
12.6
3C95
320
12.9
12.3
3C96
340
1.65
10
8.0
GRADE
Note
1. Measured at 60 C.
2013 Jul 31
746
Ferroxcube
PQ40/40
MOUNTING PARTS
General data
ITEM
REMARKS
Clamp
11.8 (2x)
1.7 (4x)
0.5
3 (4x)
55.5
0.5
41.5
3.6
42.2 max
13.5
MFP182
Dimensions in mm.
2013 Jul 31
747
TYPE NUMBER
CLM/P-PQ40/40
Ferroxcube
PQ50/50
CORE SETS
SYMBOL
PARAMETER
51 0.7
handbook, halfpage
32 min
8.15
min
UNIT
(I/A)
0.345
mm1
Ve
effective volume
37100
mm3
Ie
effective length
113
mm
Ae
effective area
328
mm2
Amin
minimum area
314
mm2
mass of set
195
18
min
32
0.6
36.1
0.6
50
0.5
20
0.35
44 0.7
MFP024
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C91
9200 25 %
2530
PQ50/50-3C91
3C94
7400 25 %
2030
PQ50/50-3C94
3C95
9200 25 %
2530
PQ50/50-3C95
3C96
6300 25 %
1730
PQ50/50-3C96
H = 250 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
3C91
320
2.9 (1)
18(1)
3C94
320
3.8
23
3C95
320
23.4
22.3
3C96
340
2.9
18
14
GRADE
Note
1. Measured at 60 C.
2013 Jul 31
748
Ferroxcube
Soft Ferrites
2013 Jul 31
749
Ferroxcube
Soft Ferrites
CBW609
2013 Jul 31
750
Ferroxcube
Soft Ferrites
PRODUCT OVERVIEW AND
TYPE NUMBER STRUCTURE
RM 6 S 3H3 A 250 / N X
Ve
(mm3)
Ae
(mm 2)
special version
MASS
(g)
RM4
230
11.0
1.5
RM4/I
322
13.8
1.7
RM4/ILP
251
14.5
1.3
RM5
450
21.2
3.1
RM5/I
574
24.8
3.2
RM5/ILP
430
24.5
2.6
RM6S
840
31.4
5.1
RM6S/I
1090
37.0
5.5
RM6S/ILP
820
37.5
4.4
RM6R
810
32.0
5.5
RM7/I
1325
44.1
7.5
RM7/ILP
1060
45.3
6.0
RM8
1850
52.0
11
RM8/I
2440
63.0
13
RM8/ILP
1860
64.9
10
RM10/I
4310
96.6
22
RM10/ILP
3360
99.1
17
RM12/I
8340
146
46
RM12/ILP
6195
148
35
RM14/I
13 900
198
69
RM14/ILP
10 230
201
55
CBW121
C P V S RM5/ILP 1S 8P XX
special version
number and type of pins:
D dual termination
L length
number of sections
associated core type
mounting type: S surface mount
mounting orientation: V vertical
plastic material type: P thermoplastic
S thermoset
coil former (bobbin)
CBW122
2013 Jul 31
751
Ferroxcube
RM4
CORE SETS
handbook, halfpage
PARAMETER
VALUE
(I/A)
1.94
mm1
Ve
effective volume
230
mm3
Ie
effective length
21.3
mm
Ae
effective area
11.0
mm2
Amin
minimum area
8.1
mm2
mass of set
1.5
0
9.8 0.4
M1.4
UNIT
4.6
0
2.5
0.2
5.8 min
0
0.5
11
O 3.9
9
0.14
0
0.2
0.06
0
O 2.04
0.4 10.4
7 0
0.1
MBE082
0.4
O 7.95 0
Dimensions in mm.
3H3
AL
(nH)
TYPE NUMBER
(WITH NUT)
TYPE NUMBER
(WITHOUT NUT)
40 3%
62
470
RM4-3D3-E40/N
RM4-3D3-E40
63 3%
97
250
RM4-3D3-A63/N
RM4-3D3-A63
400 25%
616
RM4-3D3
63 3%
97
280
RM4-3H3-A63/N
RM4-3H3-A63
100 3%
154
160
RM4-3H3-A100/N
RM4-3H3-A100
247
85
RM4-3H3-A160/N
RM4-3H3-A160
1 390
RM4-3H3
160 3%
900 25%
2013 Jul 31
752
Ferroxcube
RM4
INDUCTANCE ADJUSTERS
General data
O 2.13
handbook, halfpage
PARAMETER
SPECIFICATION
Material of head
and thread
polypropylene (PP),
glass fibre reinforced
Maximum operating
temperature
125 C
0.07
0
7.8
3.05
M 1.4
0.5
1.5
min
MBE079
Dimensions in mm.
AL
(nH)
L/L
%(1)
L/L
%(1)
63
ADJ-RM4/RM5-RED
27
100
ADJ-RM4/RM5-RED
17
ADJ-RM4/RM5-BROWN
25
160
ADJ-RM4/RM5-GREEN
ADJ-RM4/RM5-BROWN
14
ADJ-RM4/RM5-GREY
26
250
ADJ-RM4/RM5-RED
ADJ-RM4/RM5-GREY
12
ADJ-RM4/RM5-BLACK
17
Note
1. Maximum adjustment range.
2013 Jul 31
L/L
%(1)
753
Ferroxcube
RM4
COIL FORMER
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
0
6.85 0.1
7.62
5.55
min.
0.45
2.54
3
2.54
0
0.8 0.1
0.65
0.5
5
7.9 0 4.9 0
0.2
0.1
4.0 +0.15
0
1.0 +0.15
0
2
4.65 min
0.44 0.1
0.7
4.4
Dimensions in mm.
CBW610
NUMBER
OF
PINS
PIN
POSITIONS
USED
AVERAGE
LENGTH
OF TURN
(mm)
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
all
20
7.4
5.55
81.4
CSV-RM4-1S-6P(1)
1, 2, 3, 5, 6
20
7.4
5.55
81.4
CSV-RM4-1S-5P(1)
1, 2, 3, 5, 6
20
2 x 2.55
77.0
CSV-RM4-2S-5P
Note
1. Also available with post-inserted pins.
2013 Jul 31
754
TYPE NUMBER
Ferroxcube
RM4
2.0
handbook, halfpage
General data
1.3
ITEM
SPECIFICATION
Clamping force
10 N
Clip material
steel
Clip plating
silver (Ag)
Solderability
IEC 60068-2-20,
Part 2, Test Ta, method 1
Type number
CLI/P-RM4/5
10.1
0.7
MBE080
Dimensions in mm.
2013 Jul 31
755
8.5
Ferroxcube
RM4/I
CORE SETS
Effective core parameters
handbook, halfpage
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
1.69
mm1
Ve
effective volume
322
mm3
Ie
effective length
23.3
mm
Ae
effective area
13.8
mm2
Amin
minimum area
11.5
mm2
mass of set
1.7
0
9.8 0.4
0
4.6 0.2 2.5
5.8 min
0
11 0.5
0
O 3.9 0.2
9
0.25
0.4 10.4
7 0
0.1
MBE102
0.4
O 7.95 0
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
1125 25%
1510
RM4/I-3C90
3C94
1125 25%
1510
RM4/I-3C94
3C95
1320 25%
1785
RM4/I-3C95
3C96
1000 25%
1340
RM4/I-3C96
100 3%
134
200
RM4/I-3F3-A100
160 3%
215
110
RM4/I-3F3-A160
250 10%
336
60
RM4/I-3F3-A250
950 25%
1280
RM4/I-3F3
3F35
800 25%
1080
RM4/I-3F35
3F4
100 3%
134
180
RM4/I-3F4-A100
160 3%
215
95
RM4/I-3F4-A160
250 10%
336
45
RM4/I-3F4-A250
560 25%
750
RM4/I-3F4
560 25%
750
RM4/I-3F45
3F3
3F45
2013 Jul 31
756
Ferroxcube
RM4/I
AL
(nH)
AIR GAP
(m)
1 550 25 %
2085
AL
(nH)
AIR GAP
(m)
3500 +40/30%
4700
TYPE NUMBER
RM4/I-3B46
TYPE NUMBER
RM4/I-3E5
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 400 kHz;
= 50 mT;
B
T = 100 C
T = 25 C
T = 100 C
T = 100 C
3C90
320
0.04
0.04
3C94
320
0.03
0.2
GRADE
3C95
320
0.18
0.17
3C96
340
0.025
0.15
0.07
3F3
300
0.05
0.07
3F35
300
0.04
3F4
250
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C90
320
3C94
320
3C95
320
3C96
340
0.15
3F3
300
3F35
300
0.05
0.4
3F4
250
0.09
0.15
3F45
250
0.074
0.28
0.13
GRADE
2013 Jul 31
757
Ferroxcube
RM4/I
COIL FORMERS
Coil formers are equal to those of RM4, but area product is different.
Winding data and area product (for RM4/I) for RM4 coil former
NUMBER
OF
SECTIONS
NUMBER
OF
PINS
PIN
POSITIONS
USED
AVERAGE
LENGTH
OF TURN
(mm)
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
all
20
7.4
5.55
102
CSV-RM4-1S-6P()
1, 2, 3, 5, 6
20
7.4
5.55
102
CSV-RM4-1S-5P()
1, 2, 3, 5, 6
20
2 x 2.55
96.6
CSV-RM4-2S-5P
9.8
R22
TYPE NUMBER
SPECIFICATION
Clamping force
5N
Clip material
Clip plating
tin (Sn)
Solderability
IEC 60 068-2-20,
Part 2, Test Ta, method 1
Type number
CLI/P-RM4/5/I
8.2
4.3
0.7
CBW361
Dimensions in mm.
SPECIFICATION
Clamping force
5N
Clip material
Type number
CLI-RM4/5/I
handbook, halfpage
2.1
9.8
R22
8.2
CBW124
Dimensions in mm.
2013 Jul 31
758
Ferroxcube
RM4/ILP
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
1.19
mm1
Ve
effective volume
251
mm3
Ie
effective length
17.3
mm
Ae
effective area
14.5
mm2
Amin
minimum area
11.3
mm2
mass of set
1.3
handbook, halfpage
0
9.8 0.4
0
4.6 0.2 2.5
5.8 min
0
11 0.5
0
O 3.9 0.2
6.3
0.25
0
4.3 + 0.4 7.8 0.2
0
O 7.95
0.4
0
MBE864
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
1400 25%
1330
RM4/ILP-3C90
3C94
1400 25%
1330
RM4/ILP-3C94
3C95
1610 25%
1535
RM4/ILP-3C95
3C96
1250 25%
1190
RM4/ILP-3C96
3F3
1200 25%
1140
RM4/ILP-3F3
3F35
1000 25%
950
RM4/ILP-3F35
3F4
750 25%
710
RM4/ILP-3F4
3F45
750 25%
710
RM4/ILP-3F45
2013 Jul 31
AL
(nH)
AIR GAP
(m)
1900 25 %
1800
759
TYPE NUMBER
RM4/ILP-3B46
Ferroxcube
RM4/ILP
AIR GAP
(m)
3E5
5 000 +40/30%
4 750
RM4/ILP-3E5
3E6
6 000 +40/30%
5700
RM4/ILP-3E6
GRADE
TYPE NUMBER
3C90
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 400 kHz;
= 50 mT;
B
T = 100 C
T = 25 C
T = 100 C
T = 100 C
320
0.04
0.04
3C94
320
0.024
0.13
3C95
320
0.14
0.13
3C96
340
0.018
0.1
0.06
3F3
300
0.04
0.06
3F35
300
0.03
3F4
250
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
3C90
320
3C94
320
3C95
320
3C96
340
0.1
3F3
300
3F35
300
0.04
0.3
3F4
250
0.08
0.12
3F45
250
0.058
0.22
0.1
2013 Jul 31
760
Ferroxcube
RM4/ILP
COIL FORMERS
General data SMD coil former
PARAMETER
SPECIFICATION
Solderability
8 0.1
1
4.9 0
0.1
4
+0.1
0
4.3
4.3 max.
0
0.2
3
min.
2.6
1.8
0.35
2.8
7.8
CBW510
11.8 max.
9
12 max.
Dimensions in mm.
NUMBER
OF SOLDER
PADS
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
3.75
3.0
20.7
54.4
2013 Jul 31
761
TYPE NUMBER
CSVS-RM4/LP-1S-8PL
Ferroxcube
RM4/ILP
MOUNTING PARTS
General data
ITEM
SPECIFICATION
Clamping force
5 N
Clip material
Type number
CLI-RM4/5/ILP
2.1
handbook, halfpage
7.1
5.6
R22
CBW275
Dimensions in mm.
2013 Jul 31
762
Ferroxcube
RM5
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
1.01
mm1
Ve
effective volume
450
mm3
Ie
effective length
21.4
mm
Ae
effective area
21.2
mm2
Amin
minimum area
14.8
mm2
mass of set
3.1
handbook, halfpage
0
12.3 0.5
M1.4
0
6.8 0.4 2.6
6
14.9 max
0
O 4.9 0.2
9.1
0.2
0.06
O 2.04 0
0.4 10.4
6.3 0
0.1
MGC049
0.4
O 10.2 0
Dimensions in mm.
3H3
AL
(nH)
TYPE NUMBER
(WITH NUT)
TYPE NUMBER
(WITHOUT NUT)
40 3%
32
990
RM5-3D3-E40/N
RM5-3D3-E40
63 3%
51
540
RM5-3D3-E63/N
RM5-3D3-E63
100 3%
80
300
800 25%
640
160 3%
129
250 3%
201
315 3%
400 5%
1650 25%
2013 Jul 31
RM5-3D3-E100/N
RM5-3D3-E100
RM5-3D3
180
RM5-3H3-A160/N
RM5-3H3-A160
110
RM5-3H3-A250/N
RM5-3H3-A250
253
80
RM5-3H3-A315/N
RM5-3H3-A315
321
60
RM5-3H3-A400/N
RM5-3H3-A400
1310
RM5-3H3
763
Ferroxcube
RM5
INDUCTANCE ADJUSTERS
O 2.13
handbook, halfpage
General data
PARAMETER
0.07
0
SPECIFICATION
Material of head
and thread
polypropylene (PP),
glass fibre reinforced
Maximum operating
temperature
125 C
7.8
3.05
M 1.4
1.5
min
0.5
MBE079
Dimensions in mm.
3D3
AL
(nH)
L/L
%(1)
L/L
%(1)
63
ADJ-RM4/RM5-RED
23
100
ADJ-RM4/RM5-RED
15
ADJ-RM4/RM5-BROWN
24
160
ADJ-RM4/RM5-RED
11
ADJ-RM4/RM5-BROWN
15
ADJ-RM4/RM5-GREY
28
250
ADJ-RM4/RM5-RED
ADJ-RM4/RM5-BROWN
10
ADJ-RM4/RM5-GREY
17
315
ADJ-RM4/RM5-BROWN
ADJ-RM4/RM5-GREY
13
400
ADJ-RM4/RM5-BROWN
ADJ-RM4/RM5-BLACK
14
40
ADJ-RM4/RM5-GREEN
15
ADJ-RM4/RM5-RED
30
63
ADJ-RM4/RM5-RED
20
100
ADJ-RM4/RM5-RED
Note
1. Maximum adjustment range.
2013 Jul 31
L/L
%(1)
764
14
Ferroxcube
RM5
COIL FORMER
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
0
6.1 0.15
10.16
(4.8 min)
5.08
0.8 0
0.1
0.65
0.4
2.54
0.5
2
3
5.0 +0.15
0
0
0
10.1 0.2 5.95 0.2
1
0.6
0.4
5
1.0 +0.15
0
CBW611
Dimensions in mm.
AREA
PRODUCT
Ae x Aw
(mm 4)
NUMBER
OF
PINS
PIN
POSITIONS
USED
all
9.5
4.8
25
201
CSV-RM5-1S-4P
all
2 4.35
2 2.2
25
2 x 92.2
CSV-RM5-2S-4P
2013 Jul 31
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
NUMBER
OF
SECTIONS
765
TYPE NUMBER
Ferroxcube
RM5
SPECIFICATION
Solderability
6.15
0
0.2
4.68 min.
0.52
10.16
5.08
3
0.75
0.75
5
5+0.15
0 2
10.1
0
0.2
5.95
0
0.2
0.5
1+0.15
0
6.9 min.
0.45
0.7 min.
CBW511
2.54
Dimensions in mm.
WINDING
AREA
(mm 2)
WINDING
WIDTH
(mm)
AVERAGE
LENGTH
OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
NUMBER
OF
SECTIONS
NUMBER
OF
PINS
all
9.2
4.68
24.9
195
CSV-RM5-1S-6P-G(1)
1, 2, 3, 5, 6
9.2
4.68
24.9
195
CSV-RM5-1S-5P-G(1)
2, 3, 5, 6
9.2
4.68
24.9
195
CSV-RM5-1S-4P-G(1)
all
2 4.15
2 2.06
24.9
2 x 88.0
CSV-RM5-2S-6P-G(1)
1, 2, 3, 5, 6
2 4.15
2 2.06
24.9
2 x 88.0
CSV-RM5-2S-5P-G(1)
Note
1. Also available with post-inserted pins.
2013 Jul 31
766
TYPE NUMBER
Ferroxcube
RM5
MOUNTING PARTS
2.0
handbook, halfpage
General data
1.3
ITEM
SPECIFICATION
Clamping force
12 N
Clip material
steel
Clip plating
silver (Ag)
Solderability
IEC 60068-2-20,
Part 2, Test Ta, method 1
Type number
CLI/P-RM4/5
10.1
0.7
MBE080
Dimensions in mm.
2013 Jul 31
767
8.5
Ferroxcube
RM5/I
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
handbook, halfpage
UNIT
(I/A)
0.935
mm1
Ve
effective volume
574
mm3
Ie
effective length
23.2
mm
Ae
effective area
24.8
mm2
Amin
minimum area
18.1
mm2
mass of set
3.2
0
12.3 0.5
0
6.8 0.4 2.5
6
14.9 max
0
O 4.9 0.2
9.1
0.25
0.4 10.4
6.3 0
0.1
MGC050
0.4
O 10.2 0
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
63 3%
47
680
RM5/I-3C90-A63
RM5/I-3C90-A100
100 3%
74
380
160 3%
119
220
RM5/I-3C90-A160
250 3%
186
130
RM5/I-3C90-A250
315 5%
2000 25%
3C94
TYPE NUMBER
234
100
1490
RM5/I-3C90-A315
RM5/I-3C90
63 3%
47
680
100 3%
74
380
RM5/I-3C94-A100
160 3%
119
220
RM5/I-3C94-A160
RM5/I-3C94-A63
250 3%
186
130
RM5/I-3C94-A250
315 5%
234
100
RM5/I-3C94-A315
2000 25%
1490
RM5/I-3C94
3C95
2350 25%
1750
RM5/I-3C95
3C96
1800 25%
1340
47
680
RM5/I-3F3-A63
100 3%
74
380
RM5/I-3F3-A100
160 3%
119
220
RM5/I-3F3-A160
3F3
63 3%
250 3%
186
130
RM5/I-3F3-A250
315 5%
234
100
RM5/I-3F3-A315
1270
1700 25%
2013 Jul 31
RM5/I-3C96
768
RM5/I-3F3
Ferroxcube
GRADE
RM5/I
AIR GAP
(m)
TYPE NUMBER
3F35
1300 25%
970
3F4
100 3%
74
360
RM5/I-3F4-A100
160 3%
119
200
RM5/I-3F4-A160
250 3%
186
110
RM5/I-3F4-A250
900 25%
670
RM5/I-3F4
900 25%
670
RM5/I-3F45
3F45
RM5/I-3F35
GRADE
AIR GAP
(m)
TYPE NUMBER
3B46
2800 25%
2080
RM5/I-3B46
3E27
4975 25%
3700
RM5/I-3E27
3E5
6700 +40/30%
4990
RM5/I-3E5
3E6
8500 +40/30%
6330
RM5/I-3E6
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C90
320
0.07
0.08
3C94
320
0.06
0.32
3C95
320
0.32
0.3
3C96
340
0.04
0.24
0.11
3F3
315
0.08
0.11
3F35
300
0.06
3F4
250
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
=10 mT;
B
T = 100 C
3C90
320
3C94
320
3C95
320
3C96
340
0.22
3F3
315
GRADE
3F35
300
0.08
0.7
3F4
250
0.17
0.27
3F45
250
0.13
0.48
0.23
2013 Jul 31
769
Ferroxcube
RM5/I
COIL FORMERS
General data SMD coil former
PARAMETER
SPECIFICATION
Solderability
10.1 0
0.15
5.9 0
0.1
+0.1
5
0
2
4.7
min.
0.45
2.8
0.9
8.65 max.
0.3
6.1 0
0.1
11.2
1.8
14.9 max.
3.75
CBW512
3.75
11.25
14.15 max.
Dimensions in mm.
NUMBER OF
SOLDER
PADS
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
9.5
4.7
24.9
236
2013 Jul 31
770
TYPE NUMBER
CSVS-RM5-1S-8P
Ferroxcube
RM5/I
Additional coil formers are those of RM5, but area product is different.
Winding data and area product (for RM5/I) for 4-pins RM5 coil former
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
AVERAGE
LENGTH
OF TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
NUMBER
OF
SECTIONS
NUMBER
OF
PINS
PIN
POSITIONS
USED
all
9.5
4.8
25
236
CSV-RM5-1S-4P
all
2 4.35
2 2.2
25
2 x 108
CSV-RM5-2S-4P
TYPE NUMBER
Winding data and area product (for RM5/I) for 6-pins RM5 coil former
NUMBER
OF
SECTIONS
NUMBER
OF
PINS
PIN
POSITIONS
USED
WINDING
AREA
(mm 2)
WINDING
WIDTH
(mm)
AVERAGE
LENGTH
OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
all
9.2
4.68
24.9
228
CSV-RM5-1S-6P-G()
1, 2, 3, 5, 6
9.2
4.68
24.9
228
CSV-RM5-1S-5P-G()
2, 3, 5, 6
9.2
4.68
24.9
228
CSV-RM5-1S-4P-G()
all
2 4.15
2 2.06
24.9
2 x 103
CSV-RM5-2S-6P-G()
1, 2, 3, 5, 6
2 4.15
2 2.06
24.9
2 x 103
CSV-RM5-2S-5P-G()
Note
Also available with post-inserted pins.
2013 Jul 31
771
TYPE NUMBER
Ferroxcube
RM5/I
MOUNTING PARTS
General data mounting clip with earth pin
ITEM
2.1
handbook, halfpage
SPECIFICATION
Clamping force
6 N
Clip material
Clip plating
tin (Sn)
Solderability
IEC 60 068-2-20,
Part 2, Test Ta, method 1
Type number
CLI/P-RM4/5/I
9.8
R22
8.2
4.3
0.7
CBW361
Dimensions in mm.
SPECIFICATION
5 N
Clip material
Type number
CLI-RM4/5/I
handbook, halfpage
2.1
9.8
R22
8.2
CBW124
Dimensions in mm.
2013 Jul 31
772
Ferroxcube
RM5/ILP
CORE SETS
Effective core parameters
handbook, halfpage
SYMBOL
PARAMETER
VALUE
0
12.3 0.5
UNIT
(I/A)
0.710
mm1
Ve
effective volume
430
mm3
Ie
effective length
17.5
mm
Ae
effective area
24.5
mm2
Amin
minimum area
18.1
mm2
mass of set
2.6
0
6.8 0.4 2.5
6
14.6
0
0.6
0
O 4.9 0.2
6.4
0.25
0
3.6 + 0.4 7.8
0.2
0
MBE865
0.4
O 10.2 0
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
2350 25%
1340
RM5/ILP-3C90
3C94
2350 25%
1340
RM5/ILP-3C94
3C95
2710 25%
1545
RM5/ILP-3C95
3C96
2100 25%
1190
RM5/ILP-3C96
3F3
2000 25%
1140
RM5/ILP-3F3
3F35
1700 25%
970
RM5/ILP-3F35
3F4
1250 25%
710
RM5/ILP-3F4
3F45
1250 25%
710
RM5/ILP-3F45
AIR GAP
(m)
AL
(nH)
3200 25 %
1810
TYPE NUMBER
RM5/ILP-3B46
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3E5
8 500 +40/30%
4830
RM5/ILP-3E5
3E6
10000 +40/30%
5680
RM5/ILP-3E6
2013 Jul 31
773
Ferroxcube
RM5/ILP
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 400 kHz;
= 50 mT;
B
T = 100 C
T = 25 C
T = 100 C
T = 100 C
3C90
320
0.06
0.06
3C94
320
0.04
0.26
3C95
320
0.24
0.22
0.08
GRADE
3C96
340
0.03
0.2
3F3
300
0.06
0.08
3F35
300
0.06
3F4
250
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C90
320
3C94
320
3C95
320
3C96
340
0.16
3F3
300
3F35
300
0.09
0.6
3F4
250
0.13
0.2
3F45
250
0.1
0.37
0.17
GRADE
2013 Jul 31
774
Ferroxcube
RM5/ILP
COIL FORMERS
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
10.1 0
0.15
5.9 0
0.1
+0.1
5
0
0.9
2.8
0.45
3.55 0
0.1
5.9 max.
0.3
2.1
min.
1.8
14.9 max.
3.75
CBW513
3.75
11.25
14.15 max.
11.2
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
4.6
2.1
24.9
113
2013 Jul 31
775
TYPE NUMBER
CSVS-RM5/LP-1S-8P
Ferroxcube
RM5/ILP
MOUNTING PARTS
General data
ITEM
SPECIFICATION
Clamping force
5 N
Clip material
Type number
CLI-RM4/5/ILP
2.1
handbook, halfpage
7.1
5.6
R22
CBW275
Dimensions in mm.
2013 Jul 31
776
Ferroxcube
RM6R
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
14.7 0
0.6
UNIT
(I/A)
0.810
mm1
Ve
effective volume
810
mm3
Ie
effective length
25.6
mm
Ae
effective area
32.0
mm2
Amin
minimum area
23.8
mm2
mass of set
4.5
handbook, halfpage
7.4 0 2.9
0.4
M1.7
17.9 0
0.7
0
6.4
0.2
10.35
0.2
3 +0.1
0
8 +0.4 12.4
0 0.1
2.3
CBW128
12.4 +0.5
0
Dimensions in mm.
3H3
AL
(nH)
TYPE NUMBER
(WITH NUT)
TYPE NUMBER
(WITHOUT NUT)
40 3%
26
1200
RM6R-3D3-E40/N
RM6R-3D3-E40
63 3%
41
700
RM6R-3D3-E63/N
RM6R-3D3-E63
100 3%
65
400
RM6R-3D3-E100/N
RM6R-3D3-E100
160 3%
103
200
RM6R-3D3-A160/N
RM6R-3D3-A160
1 000 25%
650
160 3%
103
230
250 3%
161
110
RM6R-3H3-A250/N
RM6R-3H3-A250
315 3%
203
90
RM6R-3H3-A315/N
RM6R-3H3-A315
258
70
RM6R-3H3-A400/N
RM6R-3H3-A400
1 420
RM6R-3H3
400 3%
2 200 25%
2013 Jul 31
777
RM6R-3D3
RM6R-3H3-A160/N
RM6R-3H3-A160
Ferroxcube
RM6R
INDUCTANCE ADJUSTER
0.07
O 3.13 0
handbook, halfpage
General data
PARAMETER
SPECIFICATION
Material of head
and thread
polypropylene (PP),
glass fibre reinforced
Maximum operating
temperature
125 C
9.5
3.4
M 1.7
2.4
min
0.7
MGC079
Dimensions in mm.
AL
(nH)
L/L(1)
%
ADJ-RM6-GREEN
20
63
ADJ-RM6-GREEN
14
ADJ-RM6-RED
22
100 ADJ-RM6-GREEN
10
ADJ-RM6-RED
16
160 ADJ-RM6-GREEN
ADJ-RM6-RED
10
ADJ-RM6-WHITE
19
18
ADJ-RM6-WHITE
15
ADJ-RM6-VIOLET
250 ADJ-RM6-WHITE
12
ADJ-RM6-VIOLET
14
ADJ-RM6-BROWN
20
315 ADJ-RM6-WHITE
ADJ-RM6-BROWN
15
ADJ-RM6-BLACK
22
400 ADJ-RM6-VIOLET
ADJ-RM6-BLACK
16
ADJ-RM6-GREY
30
630 ADJ-RM6-BLACK
ADJ-RM6-GREY
15
1 000 ADJ-RM6-BLACK
ADJ-RM6-GREY
1 250
ADJ-RM6-GREY
40
ADJ-RM6-GREEN
20
63
ADJ-RM6-GREEN
14
ADJ-RM6-RED
23
ADJ-RM6-RED
16
ADJ-RM6-WHITE
28
ADJ-RM6-WHITE
17
100 ADJ-RM6-GREEN
160 ADJ-RM6-RED
10
Note
1. Maximum adjustment range.
2013 Jul 31
40
200 ADJ-RM6-RED
3D3
778
Ferroxcube
RM6R
COIL FORMERS
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
0
7.8 0.15
12.7
7.62
(6.4 min)
1.6
0
0.8 0.1
0.75
0.4
2.54
O 0.6
2
3
0
0
O 12.3 0.2 O 7.45
0.2
0.15
6.5 0
1
5.7
max
8.6
0.4
1.4
min
5.2
1
0.15
0
MGC080
Dimensions in mm.
NUMBER
OF
SECTIONS
NUMBER
OF
PINS
PIN
POSITIONS
USED
AVERAGE
LENGTH
OF TURN
(mm)
all
30
15
6.4
480
CSV-RM6S/R-1S-4P
all
30
2 7.0
2 3.0
2 x 224
CSV-RM6S/R-2S-4P
2013 Jul 31
WINDING
AREA
(mm2)
779
WINDING
WIDTH
(mm)
TYPE NUMBER
Ferroxcube
0
7.8 0.15
12.7
7.62
(6.4 min)
1.6
0.7 min
3
RM6R
0
0.8 0.1
0.75
0.4
2.54
O 0.6
4
5
0
0
12.3 0.2 O 7.45
0.2
0.15
6.5 0
2
8.6
5.7
max
0.4
5.2
MGC081
0.15
0
Dimensions in mm.
NUMBER
OF
SECTIONS
NUMBER
OF
PINS
PIN
POSITIONS
USED
AVERAGE
LENGTH
OF TURN
(mm)
all
30
15
6.4
480
CSV-RM6R-1S-6P
all
30
2 7.0
2 3.0
2 x 224
CSV-RM6R-2S-6P
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
MOUNTING PARTS
handbook, halfpage
General data
ITEM
TYPE NUMBER
2.3
1.6
SPECIFICATION
Clamping force
20 N
Clip material
steel
Clip plating
silver (Ag)
Solderability
IEC 60068-2-20,
Part 2, Test Ta, method 1
Type number
CLI/P-RM6
12
4.5
0.7
MGC082
Dimensions in mm.
2013 Jul 31
780
9.8
Ferroxcube
RM6S
CORE SETS
handbook, halfpage
PARAMETER
VALUE
14.7 0
0.6
UNIT
(I/A)
0.863
mm1
Ve
effective volume
840
mm3
Ie
effective length
27.3
mm
Ae
effective area
31.0
mm2
Amin
minimum area
23.8
mm2
mass of set
5.1
8.2
0
0.4 2.8
M1.7
>8.4
17.9 0
0.7
6.4 0
0.2
10.35
0.2
3 +0.1
0
12.4
8 +0.4
0.1
0
2.3
12.4 +0.5
0
CBW296
Dimensions in mm.
3H3
TYPE NUMBER
(WITH NUT)
TYPE NUMBER
(WITHOUT NUT)
63 3%
44
850
RM6S-3D3-E63/N
RM6S-3D3-E63
100 3%
70
460
RM6S-3D3-E100/N
RM6S-3D3-E100
160 3%
112
250
RM6S-3D3-A160/N
RM6S-3D3-A160
950 25%
670
RM6S-3D3
160 3%
112
280
RM6S-3H3-A160/N
RM6S-3H3-A160
250 3%
175
160
RM6S-3H3-A250/N
RM6S-3H3-A250
315 3%
221
120
RM6S-3H3-A315/N
RM6S-3H3-A315
400 3%
280
90
RM6S-3H3-A400/N
RM6S-3H3-A400
1470
RM6S-3H3
2 100 25%
2013 Jul 31
AL
(nH)
781
Ferroxcube
RM6S
INDUCTANCE ADJUSTERS
0.07
O 3.13 0
handbook, halfpage
General data
PARAMETER
SPECIFICATION
Material of head
and thread
polypropylene (PP),
glass fibre reinforced
Maximum operating
temperature
125 C
9.5
3.4
M 1.7
2.4
min
0.7
MGC079
Dimensions in mm.
3D3
AL
(nH)
L/L(1)
%
40
ADJ-RM6-GREEN
20
63
ADJ-RM6-GREEN
14
ADJ-RM6-RED
22
100
ADJ-RM6-GREEN
10
ADJ-RM6-RED
16
160
ADJ-RM6-GREEN
ADJ-RM6-RED
11
ADJ-RM6-WHITE
19
200
ADJ-RM6-RED
ADJ-RM6-WHITE
15
ADJ-RM6-VIOLET
19
250
ADJ-RM6-WHITE
12
ADJ-RM6-VIOLET
14
ADJ-RM6-BROWN
20
315
ADJ-RM6-WHITE
ADJ-RM6-BROWN
15
ADJ-RM6-BLACK
23
400
ADJ-RM6-VIOLET
ADJ-RM6-BLACK
16
ADJ-RM6-GREY
26
630
ADJ-RM6-BLACK
ADJ-RM6-GREY
15
1000
ADJ-RM6-BLACK
ADJ-RM6-GREY
1250
ADJ-RM6-GREY
40
ADJ-RM6-GREEN
19
63
ADJ-RM6-GREEN
14
ADJ-RM6-RED
22
100
ADJ-RM6-GREEN
ADJ-RM6-RED
15
ADJ-RM6-WHITE
27
160
ADJ-RM6-RED
ADJ-RM6-WHITE
16
Note
1. Maximum adjustment range.
2013 Jul 31
782
Ferroxcube
RM6S
COIL FORMERS
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
7.8 0
0.15
12.7
7.62
(6.4 min. )
1.6
0.8 0
0.1
0.75
0.4
2.54
0.6
2
3
0 7.45 0
12.3 0.2
0.1
+0.15
6.5 0
1
5.7
max.
8.6
0.4
1.4
min.
5.2
1.0 +0.15
0
CBW612
Dimensions in mm.
NUMBER
OF
PINS
PIN
POSITIONS
USED
all
all
2013 Jul 31
WINDING
WIDTH
(mm)
AVERAGE
LENGTH
OF TURN
(mm)
15
6.4
30
465
CSV-RM6S/R-1S-4P
2 7.0
2 3.0
30
2 x 217
CSV-RM6S/R-2S-4P
WINDING
AREA
(mm2)
783
AREA
PRODUCT
Ae x Aw
(mm 4)
TYPE NUMBER
Ferroxcube
RM6S
General data
PARAMETER
SPECIFICATION
Solderability
7.85
0.8 0
0.1
6.26 min.
12.7
7.62
0.52
3
0.45
0.87
0.5
5
12.3 0.2
6.5 +0.15
7.45 0.2
1 +0.15
2
8.5
1
6
0.7 min.
2.54
CBW516
Dimensions in mm.
NUMBER
OF
SECTIONS
NUMBER
OF
PINS
PIN
POSITIONS
USED
WINDING
AREA
(mm2)
all
15.0
6.3
30.0
465
CSV-RM6S-1S-6P-G(1)
1, 2, 3, 5, 6
15.0
6.3
30.0
465
CSV-RM6S-1S-5P-G(1)
2, 3, 5, 6
15.0
6.3
30.0
465
CSV-RM6S-1S-4P-G(1)
all
2 7.0
23
30.0
2 x 217
CSV-RM6S-2S-6P-G(1)
Note
1. Also available with post-inserted pins.
2013 Jul 31
784
TYPE NUMBER
Ferroxcube
RM6S
General data
PARAMETER
Coil former material
SPECIFICATION
unsaturated polyester (UP), glass-reinforced, flame retardant in accordance with
UL 94V-0; UL file number E61040 (M)
Solderability
7.85 0.1
6.26 min.
0.87
0.52
12.7
7.62
0.8
1 +0.15
12.3 0.2
7.45 0.1
0.5
CBW515
0.65 min.
6.5 +0.05
2.54
8.4 min.
Dimensions in mm.
NUMBER
OF PINS
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
14.5
6.26
30.7
450
2013 Jul 31
785
TYPE NUMBER
CSV-RM6S-1S-8P
Ferroxcube
General data
ITEM
RM6S
2.3
1.6
SPECIFICATION
Clamping force
20 N
Clip material
steel
Clip plating
silver (Ag)
Solderability
IEC 60068-2-20,
Part 2, Test Ta, method 1
Type number
CLI/P-RM6
12
4.5
0.7
MGC082
Dimensions in mm.
2013 Jul 31
786
9.8
Ferroxcube
RM6S/I
CORE SETS
Effective core parameters
handbook, halfpage
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.784
mm1
Ve
effective volume
1090
mm3
Ie
effective length
29.2
mm
Ae
effective area
37.0
mm2
Amin
minimum area
31.2
mm2
mass of set
5.5
2.9
0.1
14.7
0
0.6
8.2 0
0.4
>8.4
17.9 0
0.7
6.4
0
0.2
10.35
0.25
12.4
+0.4 12.4
0.1
0
CBW125
+0.5
0
Dimensions in mm.
3H3
AL
(nH)
3650 25 %
160 3%
250 5%
315 8%
1050 25%
315 3%
400 3%
630 5%
2350 25%
AIR GAP
(m)
e
2280
100
156
197
655
198
251
396
1470
0
300
170
120
0
150
110
65
0
TYPE NUMBER
RM6S/I-3B46
RM6S/I-3D3-A160
RM6S/I-3D3-A250
RM6S/I-3D3-A315
RM6S/I-3D3
RM6S/I-3H3-A315
RM6S/I-3H3-A400
RM6S/I-3H3-A630
RM6S/I-3H3
2013 Jul 31
AL
(nH)
63 3%
100 3%
160 3%
250 3%
315 3%
3000 25%
e
40
63
100
157
198
1870
1080
600
340
200
150
0
787
TYPE NUMBER
RM6S/I-3C81-E63
RM6S/I-3C81-A100
RM6S/I-3C81-A160
RM6S/I-3C81-A250
RM6S/I-3C81-A315
RM6S/I-3C81
Ferroxcube
GRADE
3C90
3C91
3C94
3C95
3C96
3F3
3F35
3F4
3F45
2013 Jul 31
AL
(nH)
63 3%
100 3%
160 3%
250 3%
315 3%
400 3%
630 5%
2600 25%
3000 25%
63 3%
100 3%
160 3%
250 3%
315 3%
400 3%
630 5%
2600 25%
3000 25%
2350 25%
63 3%
100 3%
160 3%
250 3%
315 3%
2150 25%
1750 25%
63 3%
100 3%
160 3%
250 3%
315 3%
1250 25%
1250 25%
RM6S/I
TOTAL AIR GAP
(m)
e
40
63
100
157
198
251
396
1630
1880
40
63
100
157
198
251
396
1630
1880
1470
40
63
100
157
198
1350
1100
39
62
100
156
197
780
780
1080
600
340
200
150
110
65
0
0
1080
600
340
200
150
110
65
0
0
0
1080
600
340
200
150
0
0
1040
570
310
170
130
0
0
788
TYPE NUMBER
RM6S/I-3C90-A63
RM6S/I-3C90-A100
RM6S/I-3C90-A160
RM6S/I-3C90-A250
RM6S/I-3C90-A315
RM6S/I-3C90-A400
RM6S/I-3C90-A630
RM6S/I-3C90
RM6S/I-3C91
RM6S/I-3C94-A63
RM6S/I-3C94-A100
RM6S/I-3C94-A160
RM6S/I-3C94-A250
RM6S/I-3C94-A315
RM6S/I-3C94-A400
RM6S/I-3C94-A630
RM6S/I-3C94
RM6S/I-3C95
RM6S/I-3C96
RM6S/I-3F3-A63
RM6S/I-3F3-A100
RM6S/I-3F3-A160
RM6S/I-3F3-A250
RM6S/I-3F3-A315
RM6S/I-3F3
RM6S/I-3F35
RM6S/I-3F4-A63
RM6S/I-3F4-A100
RM6S/I-3F4-A160
RM6S/I-3F4-A250
RM6S/I-3F4-A315
RM6S/I-3F4
RM6S/I-3F45
Ferroxcube
RM6S/I
3E27
6000 25%
3770
RM6S/I-3E27
3E5
8600 +40/30%
5400
RM6S/I-3E5
3E6
11 000 +40/30%
6910
RM6S/I-3E6
GRADE
TYPE NUMBER
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C81
320
0.25
3C90
320
0.13
0.14
3C91
315
0.08(1)
0.4 (1)
3C94
320
0.11
0.6
GRADE
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C95
320
0.64
0.61
3C96
340
0.08
0.4
0.2
3F3
315
0.14
0.2
3F35
315
0.12
3F4
250
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C96
340
0.5
3F3
315
3F35
315
0.16
1.3
3F4
250
0.33
0.53
3F45
250
0.25
0.94
0.44
Note
1. Measured at 60 C.
2013 Jul 31
789
Ferroxcube
RM6S/I
COIL FORMERS
General data
PARAMETER
DESCRIPTION
Pin material
Solderability
7.95 0
0.1
(6.35 min.)
3.81
3.81
0.9
0.5
5.08
2.5
2.2
2.54
+0.15
15.24 8.5 6.5 0
11.3
0.3
7.55 0
0.15
0
+0.15
12.3 0.25
6.5 0
3.2
3
0.6
CBW514
1.0 +0.15
0
4.3
16 max.
Dimensions in mm.
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
15.7
6.2
31
5.81
2013 Jul 31
790
TYPE NUMBER
CPV-RM6S/I-1S-8PD
Ferroxcube
RM6S/I
SPECIFICATION
Solderability
7.55
0
0.15
+0.15
6.5
0
7.95
10.6
handbook,max.
full pagewidth
12.3 0
0.25
0.5
2.8
0
0.15
13.7
0.9
0.3
6.3
min.
5
12.5
1.8
14.7
17.45 max.
3.75
3.75
15.7 max.
5
CBW520
Dimensions in mm.
NUMBER OF
SOLDER
PADS
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
14
6.3
31
518
2013 Jul 31
791
TYPE NUMBER
CSVS-RM6S-1S-8P
Ferroxcube
RM6S/I
SPECIFICATION
Solderability
12.3 0
0.25
0
0.15
+0.15
6.5
0
7.55
2
0.5
2.8
2.2
handbook, full pagewidth
7.95 0
0.15
10.6 max.
13.7
0.9
0.3
6.3 min.
1.8
14.7
12.5
17.45 max.
3.75
3.75
15.7 max.
5
CBW519
Dimensions in mm.
NUMBER OF
SOLDER
PADS
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
TYPE NUMBER
14.2
6.3
31.4
525
CSVS-RM6S-1S-8P-B
2013 Jul 31
792
Ferroxcube
RM6S/I
Additional coil formers are those of RM6S, but area product is different..
Winding data and area product (for RM6S/I) for 4-pins RM6S coil former
NUMBER
OF
SECTIONS
NUMBER
OF
PINS
PIN
POSITIONS
USED
all
all
WINDING
WIDTH
(mm)
AVERAGE
LENGTH
OF TURN
(mm)
15
6.4
30
555
CSV-RM6S/R-1S-4P
2 7.0
2 3.0
30
2 x 259
CSV-RM6S/R-2S-4P
WINDING
AREA
(mm2)
AREA
PRODUCT
Ae x Aw
(mm 4)
TYPE NUMBER
Winding data and area product (for RM6S/I) for RM6S coil former
PIN
POSITIONS
USED
WINDING
AREA
(mm2)
AVERAGE
AREA
WINDING
LENGTH OF PRODUCT
WIDTH
TURN
Ae x Aw
(mm)
(mm)
(mm 4)
NUMBER
OF
SECTIONS
NUMBER
OF
PINS
all
15.0
6.3
30.0
555
CSV-RM6S-1S-6P-G(1)
1, 2, 3, 5, 6
15.0
6.3
30.0
555
CSV-RM6S-1S-5P-G(1)
2, 3, 5, 6
15.0
6.3
30.0
555
CSV-RM6S-1S-4P-G(1)
all
2 7.0
23
30.0
2 x 259
CSV-RM6S-2S-6P-G(1)
TYPE NUMBER
Note 1
Also available with post-inserted pins.
Winding data and area product (for RM6S/I) for RM6S coil former
NUMBER OF
SECTIONS
NUMBER
OF PINS
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
14.5
6.26
30.7
536
2013 Jul 31
793
TYPE NUMBER
CSV-RM6S-1S-8P
Ferroxcube
RM6S/I
MOUNTING PARTS
General data
ITEM
2.3
SPECIFICATION
Clamping force
10 N
Clip material
Clip plating
tin (Sn)
Solderability
IEC 60 068-2-20,
Part 2, Test Ta, method 1
Type number
CLI/P-RM6/I
11.7
9.45
R30
4.7
0.7
MGC083
Dimensions in mm.
SPECIFICATION
10 N
Clip material
Type number
CLI-RM6/I
2.3
handbook, halfpage
11.7
R30
9.45
CBW214
Dimensions in mm.
2013 Jul 31
794
Ferroxcube
RM6S/ILP
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.580
mm1
Ve
effective volume
820
mm3
Ie
effective length
21.8
mm
Ae
effective area
37.5
mm2
Amin
minimum area
31.2
mm2
mass of set
4.4
14.7
0
0.6
handbook, halfpage
8.2 0 2.8
0.4
>8.4
17.9 0
0.7
6.4 0
0.2
6.84
0.25
4.5 +0.4 9 0
0
0.2
12.4
+0.5
0
CBW127
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3B46
4000 25 %
1850
3D3
160 3%
74
310
RM6S/ILP-3D3-A160
RM6S/ILP-3D3-A250
3H3
RM6S/ILP-3B46
250 5%
116
180
315 5%
146
130
1350 25%
625
315 3%
146
150
RM6S/ILP-3H3-A315
400 5%
185
120
RM6S/ILP-3H3-A400
630 8%
291
70
RM6S/ILP-3H3-A630
1340
2900 25%
RM6S/ILP-3D3-A315
RM6S/ILP-3D3
RM6S/ILP-3H3
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
3175 25%
1470
RM6S/ILP-3C90
3C94
3175 25%
1470
RM6S/ILP-3C94
3C95
3730 25%
1725
RM6S/ILP-3C95
3C96
2900 25%
1340
RM6S/ILP-3C96
3F3
2700 25%
1250
RM6S/ILP-3F3
2013 Jul 31
795
Ferroxcube
GRADE
AL
(nH)
RM6S/ILP
AIR GAP
(m)
TYPE NUMBER
3F35
2200 25%
1020
RM6S/ILP-3F35
3F4
1600 25%
740
RM6S/ILP-3F4
3F45
1600 25%
740
RM6S/ILP-3F45
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3E5
10500 +40/30%
4860
RM6S/ILP-3E5
3E6
13000 +40/30%
6010
RM6S/ILP-3E6
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C90
320
0.10
0.11
3C94
320
0.08
0.45
3C95
320
0.45
0.43
3C96
340
0.06
0.35
0.15
3F3
300
0.10
0.15
3F35
300
0.08
3F4
250
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C90
320
3C94
320
3C95
320
3C96
340
0.3
3F3
300
3F35
300
0.15
1.0
GRADE
3F4
250
0.25
0.4
3F45
250
0.19
0.7
0.33
2013 Jul 31
796
Ferroxcube
RM6S/ILP
COIL FORMERS
General data
PARAMETER
DESCRIPTION
Solderability
12.3 0
0.25
0
0.15
+0.15
6.5
0
7.55
4.45
7 max.
2.8
0.5
0
0.1
13.7
0.9
0.3
2.8 min.
1.8
14.7
12.5
17.45 max.
3.75
3.75
15.7 max.
5
CBW518
Dimensions in mm.
NUMBER OF
SOLDER
PADS
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
6.3
2.85
31.0
236
CSVS-RM6S/LP-1S-8P
2013 Jul 31
797
Ferroxcube
RM6S/ILP
DESCRIPTION
Solderability
12.3 0
0.25
7.55 0
0.15
+0.15
6.5
0
2.8
0.5
2.2
4.45
7 max.
0
0.1
13.7
0.9
0.3
2.8 min.
14.7
12.5
1.8
17.45 max.
3.75
3.75
15.7 max.
5
CBW517
Dimensions in mm.
NUMBER OF
SOLDER
PADS
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
6.4
2.85
31.4
240
CSVS-RM6S/LP-1S-8P-B
2013 Jul 31
798
Ferroxcube
RM6S/ILP
MOUNTING PARTS
General data
ITEM
SPECIFICATION
Clamping force
10 N
Clip material
Type number
CLI-RM6/ILP
2.3
handbook, halfpage
7.5
R16
5.95
CBW172
Dimensions in mm.
2013 Jul 31
799
Ferroxcube
RM7/I
CORE SETS
Effective core parameters
handbook, halfpage
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.680
mm 1
Ve
effective volume
1 325
mm 3
Ie
effective length
30.0
mm
Ae
effective area
44.1
mm 2
Amin
minimum area
39.6
mm 2
mass of set
7.5
0
17.2 0.7
3.3
9.3
0
0.8
20.3
0
O 7.25 0.3
11.3
0.25
0.5 13.4
8.4 0
0.1
MGC065
0.6
O 14.75 0
Dimensions in mm.
AL
(nH)
TYPE NUMBER
100 3%
54
730
RM7/I-3C90-A100
160 3%
87
410
RM7/I-3C90-A160
250 3%
135
240
1620
100 3%
54
730
RM7/I-3F3-A100
160 3%
87
410
RM7/I-3F3-A160
135
240
1350
3000 25%
3F3
AIR GAP
(m)
250 3%
2500 25%
RM7/I-3C90-A250
RM7/I-3C90
RM7/I-3F3-A250
RM7/I-3F3
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
3C90
320
0.16
0.17
3F3
315
0.15
0.25
GRADE
2013 Jul 31
800
f = 400 kHz;
= 50 mT;
B
T = 100 C
Ferroxcube
RM7/I
COIL FORMER
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
0
8.3 0.15
15.24
5.08
0.45
2
O 0.8
0
0
O 14.65 0.2 O 8.3 0.1
9.4
2.54
0.75
1 min
1.8
0
1 0.1
(6.85 min)
10.16
0.4
0.9
5.5
0.15
1.3 0
MGC066
Dimensions in mm.
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
NUMBER
OF
SECTIONS
NUMBER
OF
PINS
PIN
POSITIONS
USED
1, 2, 5, 6
35
21
6.85
926
CSV-RM7-1S-4P
all
35
21
6.85
926
CSV-RM7-1S-8P
all
35
2 9.8
2 3.2
2 x 432
CSV-RM7-2S-8P
1, 2, 4, 5, 8
35
21
6.85
926
CSV-RM7-1S-5P
1, 2, 4, 5, 8
35
2 9.8
2 3.2
2 x 432
CSV-RM7-2S-5P
2013 Jul 31
801
TYPE NUMBER
Ferroxcube
RM7/I
MOUNTING PARTS
General data
ITEM
SPECIFICATION
Clamping force
20 N
Clip material
steel
Clip plating
tin (Sn)
Solderability
IEC 60068-2-20,
Part 2, Test Ta, method 1
Type number
CLI/P-RM7
2.5
handbook, halfpage
12.9
R35
5.2
0.55
MGC067
Dimensions in mm.
2013 Jul 31
802
10.5
Ferroxcube
RM7/I
COIL FORMER
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
15.7 max
8.25 0
0.15
0.9
6.6 min
12.5
5
0.5
2.8
8.3 0
0.15
15.8
18.4 max
14.8
2
0.3
7.4+ 0.15
0
14.65 0
0.25
10.9 max
3.75
MFP106
Dimensions in mm.
NUMBER
OF
PINS
PIN
POSITIONS
USED
AVERAGE
LENGTH
OF TURN
(mm)
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
all
35
20
6.6
882
2013 Jul 31
803
TYPE NUMBER
CSVS-RM7-1S-8P-Z
Ferroxcube
RM7/I
MOUNTING PARTS
General data
ITEM
SPECIFICATION
Clamping force
20 N
Clip material
Type number
CLI-RM7
2.5
R 35
12.9
10.5
MFP107
Dimensions in mm.
2013 Jul 31
804
Ferroxcube
RM7/ILP
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.520
mm1
Ve
effective volume
1 060
mm3
Ie
effective length
23.5
mm
Ae
effective area
45.3
mm2
Amin
minimum area
39.6
mm2
mass of set
6.0
17.2 0
0.7
handbook, halfpage
3.3
>9.3
0
20.3
0.8
7.25 0
0.3
7.6
0.25
4.7
+0.5
0
9.8
0
0.2
CBW129
15.4 max.
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
3650 25%
1510
RM7/ILP-3C90
3F3
3100 25%
1280
RM7/ILP-3F3
3F4
1800 25%
740
RM7/ILP-3F4
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
3C90
320
0.13
3F3
300
3F4
250
GRADE
2013 Jul 31
f = 400 kHz;
= 50 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
0.14
0.12
0.20
0.32
0.5
805
Ferroxcube
RM7/ILP
MOUNTING PARTS
General data
ITEM
SPECIFICATION
Clamping force
20 N
Clip material
Type number
CLI-RM7/ILP
2.7
handbook, halfpage
8.8
R16
CBW622
Dimensions in mm.
2013 Jul 31
806
6.7
Ferroxcube
RM8
CORE SETS
Effective core parameters
SYMBOL
handbook, halfpage
PARAMETER
VALUE
UNIT
(I/A)
0.683
mm1
Ve
effective volume
1850
mm3
Ie
effective length
35.5
mm
Ae
effective area
52.0
mm2
Amin
minimum area
39.5
mm2
mass of set
11
11
0
19.7 0.8
M2
0.2
5 0
0
0.5
9.5
0
0.9
23.2
0
O 8.55 0.3
0.2
O 4.4 0
14.3
0.2 2.7
0.4 16.4
10.8 0
0.1
MGC060
O 17
0.6
0
Dimensions in mm.
3H3
AL
(nH)
TYPE NUMBER
(WITH NUT)
TYPE NUMBER
(WITHOUT NUT)
100 3%
54
840
RM8-3D3-E100/N
160 3%
87
450
RM8-3D3-E160/N
RM8-3D3-E160
1240 25%
675
RM8-3D3
250 3%
136
290
RM8-3H3-A250/N
RM8-3H3-A250
315 3%
171
220
RM8-3H3-A315/N
RM8-3H3-A315
400 3%
217
160
RM8-3H3-A400/N
RM8-3H3-A400
630 5%
342
90
RM8-3H3-A630/N
RM8-3H3-A630
1 550
RM8-3H3
2850 25%
2013 Jul 31
807
RM8-3D3-E100
Ferroxcube
RM8
INDUCTANCE ADJUSTERS
General data
O 4.65
handbook, halfpage
PARAMETER
0.15
0
SPECIFICATION
Material of head
and thread
polypropylene (PP),
glass fibre reinforced
Maximum operating
temperature
125 C
10.4
3.85
M2
0.8
3.7
min
MGC061
Dimensions in mm.
AL
(nH)
3H3
3D3
L/L
%(1)
63
ADJ-P22/RM8-RED
24
100
ADJ-P22/RM8-RED
16
ADJ-P22/RM8-ORANGE
21
160
ADJ-P22/RM8-ORANGE
14
ADJ-P22/RM8-WHITE
22
250
ADJ-P22/RM8-RED
ADJ-P22/RM8-ORANGE
10
ADJ-P22/RM8-WHITE
18
315
ADJ-P22/RM8-ORANGE
ADJ-P22/RM8-WHITE
13
ADJ-P22/RM8-BROWN
21
400
ADJ-P22/RM8-ORANGE
ADJ-P22/RM8-WHITE
10
ADJ-P22/RM8-BROWN
15
630
ADJ-P22/RM8-WHITE
ADJ-P22/RM8-BROWN
ADJ-P22/RM8-BLACK
13
63
ADJ-P22/RM8-RED
23
100
ADJ-P22/RM8-RED
15
ADJ-P22/RM8-ORANGE
22
160
ADJ-P22/RM8-ORANGE
14
ADJ-P22/RM8-WHITE
22
Note
1. Maximum adjustment range.
2013 Jul 31
L/L
%(1)
808
Ferroxcube
RM8
COIL FORMER
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
17.78
0.6
12.7
7.62
11.2full
min.
handbook,
pagewidth
0.9
9
3
0.97
5
4
10.65 +0.1
0
8.83
min.
8.8 +0.1
0
16.9 0
0.2
0
9.95
0.1
0.6
10
11
12
1.3 min.
5.5
+0.1
0
2.54
CBW525
Dimensions in mm.
NUMBER
PIN
OF
POSITIONS
PINS
USED
AVERAGE
LENGTH
OF TURN
(mm)
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
1, 2, 5, 6, 7,
8, 11, 12
42
30
9.1
1560
CSV-RM8-1S-8P-G(1)
12
all
42
30
9.1
1560
CSV-RM8-1S-12P-G(1)
1, 2, 5, 6, 7,
8, 11, 12
42
2 13.5
2 4.3
2 x 702
12
all
42
2 13.5
2 4.3
2 x 702
3, 4, 9, 10
42
30
9.1
1560
CSV-RM8-1S-4P
1, 2, 5, 8, 11
42
30
9.1
1560
CSV-RM8-1S-5P
1, 2, 5, 8, 11
42
2 13.5
2 4.3
2 x 702
CSV-RM8-2S-5P
2013 Jul 31
809
CSV-RM8-2S-8P
CSV-RM8-2S-12P-G
Ferroxcube
RM8
MOUNTING PARTS
General data
ITEM
SPECIFICATION
Clamping force
30 N
Clip material
steel
Clip plating
silver (Ag)
Solderability
IEC 60068-2-20,
Part 2, Test Ta, method 1
Type number
CLI/P-RM8
handbook, halfpage
4.5
3.8
16
4.5
0.7
MGC063
Dimensions in mm.
2013 Jul 31
810
13.7
Ferroxcube
RM8/I
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.604
mm1
Ve
effective volume
2440
mm3
Ie
effective length
38.4
mm
Ae
effective area
63.0
mm2
Amin
minimum area
55.4
mm2
mass of set
13
handbook, halfpage
0
19.7 0.8
0
5.1
11 0.5 0.1
9.5
0
0.9
23.2
0
O 8.55 0.3
14.3
0.25
0.4 16.4
10.8 0
0.1
O 17
Dimensions in mm.
0.6
0
MGC068
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3B46
5200 25 %
2500
3D3
250 3%
121
360
RM8/I-3D3-A250
315 5%
153
270
RM8/I-3D3-A315
400 5%
194
200
RM8/I-3D3-A400
1400 25%
675
400 3%
194
200
3H3
2013 Jul 31
RM8/I-3B46
RM8/I-3D3
RM8/I-3H3-A400
630 5%
306
115
RM8/I-3H3-A630
1000 10%
485
65
RM8/I-3H3-A1000
3250 25%
1560
811
RM8/I-3H3
Ferroxcube
RM8/I
AL
(nH)
TYPE NUMBER
100 3%
49
1100
RM8/I-3C81-E100
160 3%
78
610
RM8/I-3C81-A160
250 3%
121
360
RM8/I-3C81-A250
315 3%
153
270
RM8/I-3C81-A315
400 3%
4100 25%
3C90
194
200
1990
RM8/I-3C81-A400
RM8/I-3C81
100 3%
49
1100
RM8/I-3C90-A100
160 3%
78
610
RM8/I-3C90-A160
250 3%
121
360
RM8/I-3C90-A250
315 3%
153
270
RM8/I-3C90-A315
400 3%
194
200
RM8/I-3C90-A400
3300 25%
1600
RM8/I-3C90
3C91
4100 25%
1990
RM8/I-3C91
3C94
100 3%
49
1100
RM8/I-3C94-A100
160 3%
78
610
RM8/I-3C94-A160
250 3%
121
360
RM8/I-3C94-A250
315 3%
153
270
RM8/I-3C94-A315
400 3%
194
200
3300 25%
1600
RM8/I-3C94-A400
RM8/I-3C94
3C95
4100 25%
1990
RM8/I-3C95
3C96
3000 25%
1440
RM8/I-3C96
49
1100
RM8/I-3F3-A100
3F3
100 3%
160 3%
78
610
RM8/I-3F3-A160
250 3%
121
360
RM8/I-3F3-A250
315 3%
153
270
RM8/I-3F3-A315
400 3%
194
200
3000 25%
1440
RM8/I-3F3
3F35
2400 25%
1150
RM8/I-3F35
3F4
100 3%
49
1100
RM8/I-3F4-A100
160 3%
78
610
RM8/I-3F4-A160
250 3%
121
360
RM8/I-3F4-A250
315 3%
153
270
RM8/I-3F4-A315
400 3%
194
200
RM8/I-3F4-A400
1700 25%
820
RM8/I-3F4
1700 25%
820
RM8/I-3F45
3F45
2013 Jul 31
812
RM8/I-3F3-A400
Ferroxcube
RM8/I
GRADE
TYPE NUMBER
3E27
8000 25%
3880
RM8/I-3E27
3E5
12 500 +40/30%
6060
RM8/I-3E5
3E6
15500 +40/30%
7520
RM8/I-3E6
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 25 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C81
315
3C90
320
0.56
0.30
0.31
3C91
315
0.17(1)
1.01)
3C94
320
0.23
1.2
3C95
320
1.44
1.37
3C96
340
0.17
1.0
0.43
GRADE
3F3
315
0.27
0.47
3F35
315
0.25
3F4
250
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C96
340
0.9
3F3
315
3F35
315
0.37
2.6
3F4
250
0.74
1.2
3F45
250
0.56
2.1
1.0
GRADE
Note
1. Measured at 60 C.
2013 Jul 31
813
Ferroxcube
RM8/I
COIL FORMER
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
10.6 0
0.15
3.81
3.1
(8.6 min.)
5.08
3.81
3.81
1.1
0.65
3.81
2.5
2.54
0.3
16 23.4
16.9 0 9.95 0
0.2
0.1
0.6
3.2
23.3
4.3
1 +0.15
0
CBW524
Dimensions in mm.
AVERAGE
LENGTH OF
TURN
(mm)
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
42
30.9
8.6
1950
2013 Jul 31
814
TYPE NUMBER
CPV-RM8/I-1S-12PD
Ferroxcube
RM8/I
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
1, 2, 5, 6, 7,
8, 11, 12
42
30
9.1
1890
CSV-RM8-1S-8P-G(1)
12
all
42
30
9.1
1890
CSV-RM8-1S-12P-G(1)
1, 2, 5, 6, 7,
8, 11, 12
42
2 13.5
2 4.3
2 x 850
CSV-RM8-2S-8P
12
all
42
2 13.5
2 4.3
2 x 850
CSV-RM8-2S-12P-G
3, 4, 9, 10
42
30
9.1
1890
CSV-RM8-1S-4P
1, 2, 5, 8, 11
42
30
9.1
1890
CSV-RM8-1S-5P
1, 2, 5, 8, 11
42
2 13.5
2 4.3
2 x 850
CSV-RM8-2S-5P
NUMBER
OF
SECTIONS
NUMBER
OF
PINS
PIN
POSITIONS
USED
2013 Jul 31
815
Ferroxcube
RM8/I
MOUNTING PARTS
General data
ITEM
SPECIFICATION
4.5
Clamping force
15 N
Clip material
stainless steel
Clip plating
tin (Sn)
Solderability
IEC 60068-2-20,
Part 2, Test Ta, method 1
Type number
CLI/P-RM8/I
olumns
15.5
13.3
R 40
4.8
CBW523
0.7
Dimensions in mm.
SPECIFICATION
15 N
Clip material
stainless steel
Type number
CLI-RM8/I
4.5
olumns
15.5
R 40
13.3
CBW522
Dimensions in mm.
2013 Jul 31
816
Ferroxcube
RM8/ILP
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
handbook, halfpage
VALUE
UNIT
(I/A)
0.440
mm1
Ve
effective volume
1860
mm3
Ie
effective length
28.7
mm
Ae
effective area
64.9
mm2
Amin
minimum area
55.4
mm2
mass of set
10
0
19.7 0.8
11
0
0.5 5
9.5
0
0.9
23.2
0
O 8.55 0.3
9.4
0.25
5.9
O 17
0.6
0
0
+ 0.4
11.6 0.2
0
MBE867
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3B46
6500 25%
2280
3D3
250 3%
88
330
RM8/ILP-3D3-A250
315 3%
111
250
RM8/ILP-3D3-A315
RM8/ILP-3D3-A400
3H3
RM8/ILP-3B46
400 5%
141
180
1850 25%
650
400 3%
141
210
RM8/ILP-3H3-A400
630 5%
222
120
RM8/ILP-3H3-A630
1000 8%
352
70
RM8/ILP-3H3-A1000
1440
4100 25%
RM8/ILP-3D3
RM8/ILP-3H3
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
4100 25%
1440
RM8/ILP-3C90
3C94
4100 25%
1440
RM8/ILP-3C94
3C95
4800 25%
1690
RM8/ILP-3C95
3C96
3800 25%
1330
RM8/ILP-3C96
3F3
3800 25%
1330
RM8/ILP-3F3
3F35
3100 25%
1090
RM8/ILP-3F35
3F4
2200 25%
770
RM8/ILP-3F4
3F45
2200 25%
770
RM8/ILP-3F45
2013 Jul 31
817
Ferroxcube
RM8/ILP
AIR GAP
(m)
3E5
16000 +40/30%
5 600
RM8/ILP-3E5
3E6
19500 +40/30%
6800
RM8/ILP-3E6
GRADE
TYPE NUMBER
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 400 kHz;
= 50 mT;
B
T = 100 C
T = 25 C
T = 100 C
T = 100 C
3C90
320
0.23
0.24
3C94
320
0.18
0.92
3C95
320
1.1
1.04
3C96
340
0.14
0.73
0.32
3F3
315
0.21
0.36
3F35
300
0.2
3F4
250
f = 1 MHz;
= 50 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
GRADE
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
3C90
320
3C94
320
3C95
320
3C96
340
0.7
3F3
315
3F35
300
0.3
2.2
3F4
250
0.56
0.9
3F45
250
0.45
1.7
0.75
2013 Jul 31
818
Ferroxcube
RM8/ILP
SPECIFICATION
Pin material
Solderability
5.8 0
0.2
11.3
3.95 min.
0.6
17.78
12.7
7.62
1 +0.15
0
16.9 0
0.2
8.7 +0.15
0
9.95 0
0.2
0.6
1.4
CBW527
5
2.54
Dimensions in mm.
PIN
WINDING
NUMBER
POSITIONS
AREA
OF PINS
USED
(mm2)
WINDING
WIDTH
(mm)
AVERAGE
AREA
LENGTH PRODUCT
OF TURN
Ae x Aw
(mm)
(mm4)
TYPE NUMBER
12
all
13.3
3.95
41.8
863
CSV-RM8/ILP-1S-12P-Z
10
1, 2, 3, 4, 6,
7, 9, 10, 11,
12
13.3
3.95
41.8
863
CSV-RM8/ILP-1S-10P-Z
10
1, 2, 3, 4, 6,
8, 9, 10, 11,
12
13.3
3.95
41.8
863
CSV-RM8/ILP-1S-10P-ZA
2013 Jul 31
819
Ferroxcube
RM8/ILP
MOUNTING PARTS
General data
ITEM
SPECIFICATION
Clamping force
15 N
Clip material
Clip plating
tin (Sn)
Solderability
IEC 60 068-2-20,
Part 2, Test Ta, method 1
Type number
CLI/P-RM8/ILP
4.5
columns
10.65
R 22
8.45
4.8
CBW526
0.7
Dimensions in mm.
2013 Jul 31
820
Ferroxcube
RM10/I
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.462
mm1
Ve
effective volume
4310
mm3
Ie
effective length
44.6
mm
Ae
effective area
96.6
mm2
Amin
minimum area
89.1
mm2
mass of set
22
handbook, halfpage
0
24.7 1.1
5.1
0.1
0
13.5 0.5
10.9
0
28.5 1.3
0
O 10.9 0.4
0.6 18.6
12.4 0
0.1
16.2
0.25
0.9
O 21.2 0
MGC097
Dimensions in mm.
3H3
AL
(nH)
315 3%
400 5%
630 8%
1900 25%
400 3%
630 3%
1000 10%
4400 25%
AIR GAP
(m)
e
116
147
232
700
147
232
367
1620
380
280
140
0
330
190
110
0
TYPE NUMBER
RM10/I-3D3-A315
RM10/I-3D3-A400
RM10/I-3D3-A630
RM10/I-3D3
RM10/I-3H3-A400
RM10/I-3H3-A630
RM10/I-3H3-A1000
RM10/I-3H3
2013 Jul 31
AL
(nH)
160 3%
250 3%
315 3%
400 3%
630 3%
5500 25%
e
59
92
116
147
232
2020
980
570
430
330
190
0
821
TYPE NUMBER
RM10/I-3C81-E160
RM10/I-3C81-A250
RM10/I-3C81-A315
RM10/I-3C81-A400
RM10/I-3C81-A630
RM10/I-3C81
Ferroxcube
GRADE
3C90
3C91
3C94
3C95
3C96
3F3
3F35
AL
(nH)
160 3%
250 3%
315 3%
400 3%
630 3%
4500 25%
5500 25%
160 3%
250 3%
315 3%
400 3%
630 3%
4500 25%
5500 25%
4050 25%
160 3%
250 3%
315 3%
400 3%
630 3%
4050 25%
3100 25%
RM10/I
59
92
116
147
232
1650
2020
59
92
116
147
232
1650
2020
1680
59
92
116
147
232
1490
1190
980
570
430
330
190
0
0
980
570
430
330
190
0
0
0
980
570
430
330
190
0
0
TYPE NUMBER
RM10/I-3C90-A160
RM10/I-3C90-A250
RM10/I-3C90-A315
RM10/I-3C90-A400
RM10/I-3C90-A630
RM10/I-3C90
RM10/I-3C91
RM10/I-3C94-A160
RM10/I-3C94-A250
RM10/I-3C94-A315
RM10/I-3C94-A400
RM10/I-3C94-A630
RM10/I-3C94
RM10/I-3C95
RM10/I-3C96
RM10/I-3F3-A160
RM10/I-3F3-A250
RM10/I-3F3-A315
RM10/I-3F3-A400
RM10/I-3F3-A630
RM10/I-3F3
RM10/I-3F35
3E27
10700 25%
3930
RM10/I-3E27
3E5
16 000 +40/30%
5880
RM10/I-3E5
GRADE
2013 Jul 31
822
TYPE NUMBER
Ferroxcube
RM10/I
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 400 kHz;
= 50 mT;
B
T = 100 C
T = 25 C
T = 100 C
T = 100 C
3C81
315
1.0
3C90
320
0.52
0.55
GRADE
0.3(1)
1.8(1)
3C91
315
3C94
320
0.41
2.3
3C95
320
2.54
2.41
3C96
340
0.3
1.8
0.77
3F3
315
0.48
0.82
3F35
315
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C96
340
1.5
3F3
315
3F35
315
0.6
4.5
GRADE
Note
1. Measured at 60 C.
2013 Jul 31
823
Ferroxcube
RM10/I
COIL FORMER
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
12.2 0
0.2
(10 min. )
5.08
3.81
3.81
3.81
1.2
0.7
3.81
3.45 0
0.1
3.1
0.3
2.54
1.3 +0.15
0
+0.2
27.94 13.8 11.1 0
21.9 33
21 0 12.5 0
0.2
0.2
1
3.2
3
23.3
4.3
1.6 +0.15
0
CBW528
Dimensions in mm.
AVERAGE
LENGTH OF
TURN
(mm)
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
52
44.2
10.0
4270
2013 Jul 31
824
TYPE NUMBER
CPV-RM10-1S-12PD
Ferroxcube
RM10/I
COIL FORMER
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
0
12.25 0.1
20.32
(10.4 min.)
15.24
0.65
10.16
13.8 min.
1.3
0.6
7
4
9
21 0 12.5 0
11.2 +0.1
0.2
0
0.2
1.3 +0.15
0
1.4 min.
10
11
12
10.8 max.
0.55
2.54
5.5
CBW613
Dimensions in mm.
AVERAGE
LENGTH
OF TURN
(mm)
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
12
all
52.3
42.7
10.3
4120
3, 4, 6, 9, 10
52.3
42.7
10.3
4120
CSV-RM10-1S-5P
1,3,4,6,7,9,
10,12
52.3
42.7
10.3
4120
CSV-RM10-1S-8P
10
all exept 2,
11
52.3
42.7
10.3
4120
CSV-RM10-1S-10P
11
all exept 9
52.3
42.7
10.3
4120
CSV-RM10-1S-11P
1,3,4,6,7,9,
10,12
52.3
2 x 21.1
2 x 4.9
2 x 2040
CSV-RM10-2S-8P
NUMBER
OF
SECTIONS
NUMBER
OF
PINS
1
1
2013 Jul 31
825
TYPE NUMBER
CSV-RM10-1S-12P
Ferroxcube
RM10/I
AVERAGE
LENGTH
OF TURN
(mm)
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
52.3
2 x 21.1
2 x 4.9
2 x 2040
NUMBER
OF
SECTIONS
NUMBER
OF
PINS
PIN
POSITIONS
USED
10
all exept 2,
11
12
all
52.3
2 x 21.1
2 x 4.9
2 x 2040
CSV-RM10-2S-12P
3, 4, 6, 9, 10
52.3
2 x 21.1
2 x 4.9
2 x 2040
CSV-RM10-2S-5P
TYPE NUMBER
CSV-RM10-2S-10P
MOUNTING PARTS
General data
ITEM
4.5
handbook, halfpage
SPECIFICATION
Clamping force
30 N
Clip material
stainless steel
Clip plating
tin (Sn)
Solderability
IEC 60068-2-20,
Part 2, Test Ta, method 1
Type number
CLI/P-RM10/I
17.5
R40
0.7
MGC090
Dimensions in mm.
2013 Jul 31
826
15.1
Ferroxcube
RM10/ILP
CORE SETS
Effective core parametersRM10/ILP
SYMBOL
PARAMETER
VALUE
handbook, halfpage
UNIT
(I/A)
0.340
mm1
Ve
effective volume
3360
mm3
Ie
effective length
33.9
mm
Ae
effective area
99.1
mm2
Amin
minimum area
89.1
mm2
mass of set
17
0
24.7 1.1
0
13.5 0.5 5
10.9
0
28.5 1.3
0
O 10.9 0.4
0
6.7 + 0.4 13 0.2
0
10.5
0.25
0.9
O 21.2 0
MBE869
Dimensions in mm.
3H3
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
315 3%
86
400
RM10/ILP-3D3-A315
400 3%
109
300
RM10/ILP-3D3-A400
RM10/ILP-3D3-A630
630 5%
171
160
2500 25%
675
400 3%
109
330
RM10/ILP-3D3
RM10/ILP-3H3-A400
630 3%
171
200
RM10/ILP-3H3-A630
1000 5%
272
110
RM10/ILP-3H3-A1000
1510
5600 25%
RM10/ILP-3H3
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
5600 25%
1510
RM10/ILP-3C90
3C94
5600 25%
1510
RM10/ILP-3C94
3C95
6620 25%
1800
RM10/ILP-3C95
3C96
5200 25%
1400
RM10/ILP-3C96
3F3
5 200 25%
1410
RM10/ILP-3F3
3F35
4000 25%
1080
RM10/ILP-3F35
3F4
3000 25%
810
RM10/ILP-3F4
2013 Jul 31
827
Ferroxcube
RM10/ILP
AIR GAP
(m)
3E5
5950
RM10/ILP-3E5
3E6
7300
RM10/ILP-3E6
GRADE
TYPE NUMBER
3C90
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 100 kHz;
= 200 mT;
B
T = 100 C
T = 25 C
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
320
0.41
0.43
3C94
320
0.32
1.7
3C95
320
1.98
1.88
3C96
340
0.24
1.4
0.6
3F3
300
0.37
0.64
3F35
300
3F4
250
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C90
320
3C94
320
3C95
320
3C96
340
1.2
3F3
300
3F35
300
0.45
3.5
3F4
250
1.0
1.6
GRADE
2013 Jul 31
828
Ferroxcube
RM10/ILP
COIL FORMER
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
6.55 0
0.2
3.81
3.81
3.81
3.45 0
0.1
4.35 min.
5.08
1.2
0.7
3.81
3.1
0.3
2.54
1.3 +0.15
0
+0.2
27.94 13.8 11.1 0
21 0 12.5 0
0.2
0.2
21.9 33
1
3.2
3
23.3
1.6 +0.15
0
4.3
CBW530
Dimensions in mm.
AVERAGE
LENGTH OF
TURN
(mm)
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
52
21.0
4.35
2080
CPV-RM10/ILP-1S-12PD
2013 Jul 31
829
Ferroxcube
RM10/ILP
MOUNTING PARTS
General data mounting clip with earth pin
ITEM
SPECIFICATION
Clamping force
30 N
Clip material
Clip plating
tin (Sn)
Solderability
IEC 60 068-2-20,
Part 2, Test Ta, method 1
Type number
CLI/P-RM10/ILP
4.5
olumns
11.8
R 22
9.4
CBW531
0.7
Dimensions in mm.
2013 Jul 31
830
Ferroxcube
RM12/I
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
handbook, halfpage
UNIT
(I/A)
0.388
mm1
Ve
effective volume
8340
mm3
Ie
effective length
56.6
mm
Ae
effective area
146
mm2
Amin
minimum area
125
mm2
mass of set
46
0
29.8 1.1
16.1
0
5
0.5
12.9
0
37.4 1.3
0
O 12.8 0.4
0.6 24.5
16.8 0
0.1
21.6
0.25
1
O 25 0
MGC103
Dimensions in mm.
3C94
AIR GAP
(m)
160 3%
49
1570
RM12/I-3C90-A160
250 3%
77
900
RM12/I-3C90-A250
AL
(nH)
TYPE NUMBER
315 5%
97
680
RM12/I-3C90-A315
400 5%
123
510
RM12/I-3C90-A400
630 5%
194
300
RM12/I-3C90-A630
5600 25%
1730
160 3%
49
1570
RM12/I-3C94-A160
250 3%
77
900
RM12/I-3C94-A250
RM12/I-3C90
315 5%
97
680
RM12/I-3C94-A315
400 5%
123
510
RM12/I-3C94-A400
630 5%
194
300
1730
5600 25%
RM12/I-3C94-A630
RM12/I-3C94
3C95
6790 25%
2095
RM12/I-3C95
3C96
5050 25%
1560
RM12/I-3C96
2013 Jul 31
831
Ferroxcube
AL
(nH)
AIR GAP
(m)
160 3%
49
1570
RM12/I-3F3-A160
250 3%
77
900
RM12/I-3F3-A250
GRADE
3F3
RM12/I
TYPE NUMBER
315 5%
97
680
RM12/I-3F3-A315
400 5%
123
510
RM12/I-3F3-A400
630 5%
194
300
RM12/I-3F3-A630
1560
5050 25%
RM12/I-3F3
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
3C90
315
1.0
1.1
3C94
315
0.8
4.5
3C95
315
4.92
4.67
3C96
340
0.6
3.6
1.5
3.0
3F3
315
0.92
1.6
2013 Jul 31
832
Ferroxcube
RM12/I
COIL FORMER
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
16.5 0
0.2
5.08
(14.3 min.)
5.08
5.08
5.08
3.7 0
0.1
1.2
0.7
5.08
3.2
0.3
2.54
33.0216.5 13 +0.2
0
26 38.4
1.3 +0.15
0
24.7 0 14.5 0
0.2
0.2
1
3.4
3
4.8
28.4
1.6 +0.15
0
CBW533
Dimensions in mm.
AVERAGE
LENGTH OF
TURN
(mm)
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
61
75.0
14.3
10950
2013 Jul 31
833
TYPE NUMBER
CPV-RM12/I-1S-12PD
Ferroxcube
RM12/I
COIL FORMERS
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
16.5
27.94
(14.55 min.)
22.86
0.65
17.78
16.5
0
0.2
0.65
12.7
13 +0.2
0
1.3 0
0.1
0
24.7 0
0.2 14.50.2
0.8
1.3 +0.15
0
6.2
1.2 min.
CBW614
2.54
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
72.0
14.4
61
10500
2013 Jul 31
834
TYPE NUMBER
CSV-RM12-1S-12P
Ferroxcube
RM12/I
MOUNTING PARTS
General data
ITEM
Clamping force
35 N
Clip material
stainless steel
Clip plating
tin (Sn)
Solderability
IEC 60068-2-20,
Part 2, Test Ta, method 1
Type number
4.5
SPECIFICATION
olumns
23.7
R 55
20.4
CLI/P-RM12/I
5.3
CBW532
0.9
Dimensions in mm.
2013 Jul 31
835
Ferroxcube
RM12/ILP
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.280
mm1
Ve
effective volume
6200
mm3
Ie
effective length
42
mm
Ae
effective area
148
mm2
Amin
minimum area
125
mm2
mass of set
35
29.8
0
1.1
handbook, halfpage
16.1 0 5
0.5
>12.9
37.4 0
1.3
12.8 0
0.4
13.8
0.25
25
+0.5 16.8 0
0.2
0
+1
0
CBW133
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
7100 25%
1600
RM12/ILP-3C90
3C94
7100 25%
1600
RM12/ILP-3C94
3C95
8470 25%
1915
RM12/ILP-3C95
3C96
6700 25%
1510
RM12/ILP-3C96
3F3
6700 25%
1510
RM12/ILP-3F3
3F35
5000 25%
1110
RM12/ILP-3F35
3F4
3600 25%
810
RM12/ILP-3F4
2013 Jul 31
836
Ferroxcube
RM12/ILP
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 400 kHz;
= 50 mT;
B
T = 100 C
T = 25 C
T = 100 C
T = 100 C
3C90
315
0.75
0.79
3C94
315
0.62
3.3
3C95
315
3.66
3.47
3C96
315
0.49
2.6
1.1
3F3
300
0.68
1.2
3F35
300
3F4
250
GRADE
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C90
315
3C94
315
3C95
315
3C96
315
2.2
3F3
300
3F35
300
0.85
6.5
3F4
250
1.8
3.0
GRADE
2013 Jul 31
837
Ferroxcube
RM14/I
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
handbook, halfpage
VALUE
0
34.7 1.2
UNIT
(I/A)
0.353
mm1
Ve
effective volume
13 900
mm3
Ie
effective length
70.0
mm
Ae
effective area
198
mm2
Amin
minimum area
168
mm2
mass of set
69
19
0 5.6
0.6
17
0
42.2 1.4
0
O 15 0.6
0.6 30.1
20.8 0
0.1
27
0.25
1.2
O 29 0
MGC106
Dimensions in mm.
3C94
3C95
3C96
3F3
2013 Jul 31
AL
(nH)
250 3%
315 3%
400 3%
630 5%
1000 5%
6600 25%
250 3%
315 3%
400 3%
630 5%
1000 5%
6600 25%
8130 25%
5700 25%
250 3%
315 3%
400 3%
630 5%
1000 5%
5700 25%
AIR GAP
(m)
e
70
89
113
177
281
1850
70
89
113
177
281
1850
2290
1600
70
89
113
177
281
1600
1270
950
710
410
240
0
1270
950
710
410
240
0
0
0
1270
950
710
410
240
0
838
TYPE NUMBER
RM14/I-3C90-A250
RM14/I-3C90-A315
RM14/I-3C90-A400
RM14/I-3C90-A630
RM14/I-3C90-A1000
RM14/I-3C90
RM14/I-3C94-A250
RM14/I-3C94-A315
RM14/I-3C94-A400
RM14/I-3C94-A630
RM14/I-3C94-A1000
RM14/I-3C94
RM14/I-3C95
RM14/I-3C96
RM14/I-3F3-A250
RM14/I-3F3-A315
RM14/I-3F3-A400
RM14/I-3F3-A630
RM14/I-3F3-A1000
RM14/I-3F3
Ferroxcube
RM14/I
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
3C90
315
1.67
1.76
3C94
315
1.4
7.4
GRADE
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
3C95
315
8.76
8.34
3C96
340
1.1
5.6
2.6
5.2
3F3
315
1.55
2.65
2013 Jul 31
839
Ferroxcube
RM14/I
COIL FORMERS
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
0
20.5 0.3
(18.35 min.)
33.02
22.86
12.7
0.75
5
0
1.3 0.1
1
2.54
4
7
8
0.2
15.2 0
2
9
3
0
0
28.8 0.3 16.8 0.1
0.8
19.4
10
12
11
0.15
1.3 0
6.2
CBW615
Dimensions in mm.
NUMBER
OF
PINS
PIN
POSITIONS
USED
AVERAGE
LENGTH
OF TURN
(mm)
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
AREA
PRODUCT
Ae x Aw
(mm 4)
10
1, 2, 3, 4, 6,
7, 9, 10, 11,
12
71
112
18.4
22200
CSV-RM14-1S-10P
12
all
71
112
18.4
22200
CSV-RM14-1S-12P
2013 Jul 31
840
TYPE NUMBER
Ferroxcube
RM14/I
General data
PARAMETER
SPECIFICATION
Pin material
Solderability
20.5 0
0.3
(18 min.)
7.62
5.08
5.08
5.08
4.4 0
0.1
46.7
1.3
0.8
5.08
0.3
2.54
1.6 +0.15
0
28.6 41
28.8 0 16.8 0
0.2
0.2
7.1
1
3.7
3.4
1.6 +0.15
0
4.8
31.4
CBW535
Dimensions in mm.
AVERAGE
LENGTH OF
TURN
(mm)
WINDING
AREA
(mm2)
WINDING
WIDTH
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
71
111
18.0
22000
2013 Jul 31
841
TYPE NUMBER
CPV-RM14/I-1S-12PD
Ferroxcube
RM14/I
MOUNTING PARTS
General data mounting clip with earth pin
8.1 max.
ITEM
SPECIFICATION
Clamping force
40 N
Clip material
stainless steel
Clip plating
tin (Sn)
Solderability
IEC 60068-2-20,
Part 2, Test Ta, method 1
Type number
CLI/P-RM14/I
4 columns
28.9
25.7
R 70
5.5
0.9 (2)
Dimensions in mm.
2013 Jul 31
842
CBW534
Ferroxcube
RM14/ILP
CORE SETS
Effective core parameters
handbook, halfpage
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.250
mm1
Ve
effective volume
10 230
mm3
Ie
effective length
50.9
mm
Ae
effective area
201
mm2
Amin
minimum area
168
mm2
mass of set
55
0
34.7 1.2
19
0 5.6
0.6
17
0
42.2 1.4
0
O 15 0.6
17.3
0.25
0
11.1 + 0.6 20.5 0.2
0
1.2
O 29 0
MBE871
Dimensions in mm.
AL
(nH)
AIR GAP
(m)
TYPE NUMBER
3C90
8400 25%
1690
RM14/ILP-3C90
3C94
8400 25%
1690
RM14/ILP-3C94
3C95
10140 25%
2040
RM14/ILP-3C95
3C96
7700 25%
1550
RM14/ILP-3C96
3F3
7700 25%
1550
RM14/ILP-3F3
3F35
5800 25%
1150
RM14/ILP-3F35
3F4
4200 25%
850
RM14/ILP-3F4
2013 Jul 31
843
Ferroxcube
RM14/ILP
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 100 kHz;
= 200 mT;
B
f = 400 kHz;
= 50 mT;
B
T = 100 C
T = 25 C
T = 100 C
T = 100 C
3C90
315
1.3
1.4
3C94
315
1.1
5.5
3C95
315
6.44
6.14
3C96
340
0.82
4.4
1.9
3F3
300
1.2
2.0
3F35
300
3F4
250
GRADE
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 500 kHz;
= 50 mT;
B
T = 100 C
f = 500 kHz;
= 100 mT;
B
T = 100 C
f = 1 MHz;
= 30 mT;
B
T = 100 C
f = 3 MHz;
= 10 mT;
B
T = 100 C
3C90
315
3C94
315
3C95
315
3C96
340
3.8
3F3
300
3F35
300
1.4
11
3F4
250
3.0
4.9
GRADE
2013 Jul 31
844
Ferroxcube
Soft Ferrites
2013 Jul 31
845
Ferroxcube
Soft Ferrites
CBW627
2013 Jul 31
846
Ferroxcube
Soft Ferrites
U 25/20/13 3C90 X
Ve
(mm3)
Ae
(mm2)
MASS
(g)
U10/8/3
309
8.07
0.9
U15/11/6
1680
32.3
U20/16/7
3800
56
U25/16/6
3380
40.3
I25/6/6
2590
40.3
4.5
U25/20/13
9180
104
23.5
U30/25/16
17 900
161
43
U33/22/9
9490
86.5
24
U46/40/28
71300
392
182
U67/27/14
35 200
204
85
U80/65/32
219000
706
560
U93/52/30
217000
840
560
U93/76/16
159 000
448
400
I93/28/16
115000
447
200
U93/76/30
297000
840
760
I93/28/30
175000
836
370
U100/57/25
199000
645
500
I100/25/25
158000
645
300
U126/91/20
268800
560
680
special version
core material
core size
core type
CBW135
I 25/6/6 3C90
core material
core size
core type
MFP103
C P H U10/8/3 1S 4P X
special version
number and type of pins:
D dual termination
F flat
L long
number of sections
associated core type
mounting orientation: H horizontal
V vertical
plastic material type: P thermoplastic
S thermoset
coil former (bobbin)
CBW136
2013 Jul 31
847
Ferroxcube
U10/8/3
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
9.9 0.3
UNIT
(I/A)
4.74
mm1
Ve
effective volume
309
mm3
Ie
effective length
38.3
mm
Ae
effective area
8.07
mm2
Amin
minimum area
7.91
mm2
0.9
4.35 0.2
handbook, halfpage
5 +0.3
0
0
8.2 0.2
2.85
0.15
CBW299
Dimensions in mm.
3C90
420 25%
1590
U10/8/3-3C90
3C94
470 25%
1770
U10/8/3-3C94
GRADE
TYPE NUMBER
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C90
320
0.04
0.04
3C94
320
0.03
0.18
GRADE
2013 Jul 31
848
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
Ferroxcube
U10/8/3
COIL FORMERS
General data 4-pins U10/8/3 coil former
PARAMETER
SPECIFICATION
Pin material
Solderability
3 min.
2.54
2.2
4.1 max.
11.1
max.
1.6 max.
3.7
max.
CBW581
2.54
0.03
10.160.05
0.8
max.
1.3
0.8
+0.15
0
7.62 0.05
Dimensions in mm.
WINDING
AREA
(mm 2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH
OF TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
28
30
226
2013 Jul 31
849
TYPE NUMBER
CPH-U10/8/3-1S-4P
Ferroxcube
U15/11/6
CORE SETS
15.4 0.5
PARAMETER
VALUE
5.4 0.4
UNIT
(I/A)
1.60
mm1
Ve
effective volume
1680
mm3
Ie
effective length
52
mm
Ae
effective area
32.3
mm2
6.4
0.35
11.45
0.2
6.25
0.4
0
MSA143
Dimensions in mm.
3C90
1400 25%
1900
U15/11/6-3C90
3C94
1400 25%
1900
U15/11/6-3C94
GRADE
TYPE NUMBER
3C11
2400 25%
3080
U15/11/6-3C11
3E27
3400 25%
4300
U15/11/6-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
3C90
320
0.2
0.22
3C94
320
0.17
1.0
GRADE
2013 Jul 31
850
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
Ferroxcube
U15/11/6
COIL FORMERS
General data 4-pins U15/11/6 coil former
PARAMETER
SPECIFICATION
Pin material
Solderability
18.2 max.
16.4 max.
+0.2
7
0
9.7 min.
1.6 +0.15
0
16.95 7.35 0
0.2
max.
3.9
5.65 +0.2
0
1.5
3.1
0.7
8.5 0
0.2
12.7
15.24
1.3
2.54
2
CBW225
Dimensions in mm.
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
38.7
9.7
46.6
1250
CPH-U15/11/6-1S-4P
2 17.9
2 4.45
46.6
2 x 578
CPH-U15/11/6-2S-4P
2013 Jul 31
851
Ferroxcube
U20/16/7
CORE SETS
Effective core parameters
SYMBOL
20.8 0.6
PARAMETER
VALUE
UNIT
(I/A)
1.21
mm1
Ve
effective volume
3800
mm3
Ie
effective length
68
mm
Ae
effective area
56
mm2
6.4 0.4
8.3
0.3
15.6
0.2
7.5
0.25
MSA140
Dimensions in mm.
AL
(nH)
TYPE NUMBER
3C90
1900 25%
1 950
U20/16/7-3C90
3C94
1900 25%
1 950
U20/16/7-3C94
3C11
3100 25%
3000
U20/16/7-3C11
3E27
4800 25%
4 600
U20/16/7-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C90
320
0.46
0.48
3C94
320
0.36
2.3
GRADE
2013 Jul 31
852
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
Ferroxcube
U25/16/6
(376U250)
PARAMETER
VALUE
UNIT
(I/A)
2.07
mm1
Ve
effective volume
3380
mm3
Ie
effective length
83.6
mm
Ae
effective area
40.3
mm2
8.0
25.4
handbook, halfpage
+ 0.5
0.4
12.7 0.25
9.5
0.13
15.9
0.13
6.4 0.13
MBE980
Dimensions in mm.
GRADE
TYPE NUMBER
3C81
1 400 25%
2300
U25/16/6-3C81
3C90
1200 25%
2300
U25/16/6-3C90
3C91
1 400 25%
2300
U25/16/6-3C91
3C94
1200 25%
2300
U25/16/6-3C94
3C11
2050 25%
3380
U25/16/6-3C11
3E27
2500 25%
4130
U25/16/6-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 100 kHz;
= 200 mT;
B
3C81
320
0.78
3C90
320
0.4
0.4
3C91
320
0.23(1)
1.6(1)
3C94
320
0.3
2.0
GRADE
T = 100 C
Note
1. Measured at 60 C.
2013 Jul 31
853
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
Ferroxcube
I25/6/6
(376B250)
PARAMETER
VALUE
handbook, halfpage
25.4
UNIT
(I/A)
1.59
mm1
Ve
effective volume
2590
mm3
Ie
effective length
64.3
mm
Ae
effective area
40.3
mm2
mass of I core
4.5
6.4
0.13
+0.64
0.25
CBW139
Dimensions in mm.
GRADE
TYPE NUMBER
3C81
1750 25%
2210
I25/6/6-3C81
3C90
1500 25%
1900
I25/6/6-3C90
3C91
1750 25%
2210
I25/6/6-3C91
3C94
1500 25%
1900
I25/6/6-3C94
3C11
2500 25%
3160
I25/6/6-3C11
3E27
3000 25%
3800
I25/6/6-3E27
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C81
320
0.6
3C90
320
0.3
0.3
3C91
320
0.18(1)
1.2(1)
3C94
320
0.23
1.6
GRADE
Note
1. Measured at 60 C.
2013 Jul 31
854
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
Ferroxcube
U25/20/13
CORE SETS
Effective core parameters
24.8 0.7
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.85
mm1
Ve
effective volume
9180
mm3
Ie
effective length
88.2
mm
Ae
effective area
104
mm2
23.5
8.4
0.4
11.4
0.4
19.6
0.2
12.7
0.3
MSA141
Dimensions in mm.
3C90
2900 25%
2 000
3C94
2900 25%
2 000
U25/20/13-3C94
3C11
5000 25%
3400
U25/20/13-3C11
3E27
6300 25%
4 300
U25/20/13-3E27
GRADE
TYPE NUMBER
U25/20/13-3C90
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C90
320
1.1
1.2
3C94
320
0.9
5.5
GRADE
2013 Jul 31
855
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
Ferroxcube
U30/25/16
CORE SETS
31.3 0.7
PARAMETER
VALUE
10.5 0.5
UNIT
(I/A)
0.690
mm1
Ve
effective volume
17900
mm3
Ie
effective length
111
mm
Ae
effective area
161
mm2
43
14.9
0.4
25.3
0.2
16
0.5
0.1
MSA142
Dimensions in mm.
3C90
3700 25%
2 030
U30/25/16-3C90
3C94
3700 25%
2 030
U30/25/16-3C94
GRADE
TYPE NUMBER
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
3C90
320
2.2
2.3
3C94
320
1.8
11
GRADE
2013 Jul 31
856
Ferroxcube
U33/22/9
(1F30)
PARAMETER
VALUE
UNIT
(I/A)
1.27
mm1
Ve
effective volume
9490
mm3
Ie
effective length
110
mm
Ae
effective area
86.5
mm2
24
33.3 0.8
handbook, halfpage
14.3
0.5
12.7
0.25
22.2
0.15
9.4
0.25
MGB553
Dimensions in mm.
GRADE
TYPE NUMBER
3C81
2300 25%
2320
U33/22/9-3C81
3C91
2300 25%
2320
U33/22/9-3C91
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
320
2.2
0.57(1)
4.3(1)
3C81
3C91
320
Note
Note
1. Measured at 60 C.
2013 Jul 31
857
Ferroxcube
U46/40/28
U CORES
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
0.464
mm1
Ve
effective volume
71300
mm3
46.0 1.0
Ie
effective length
182
mm
18.0 0.5
Ae
effective area
392
mm2
Amin
minimum area
392
mm2
182
25.5
0.75
R 0.2
+ 0.2
0
39.5
0.25
R 3.0 max
28.0
0.8
R0
+ 0.4
0
MFP144
Dimensions in mm.
3C90
6000 25 %
2215
U46/40/28-3C90
3F3
5100 25 %
1880
U46/40/28-3F3
GRADE
TYPE NUMBER
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C90
320
9.6
45
3F3
320
9.6
45
2013 Jul 31
858
Ferroxcube
U67/27/14
(1F10)
PARAMETER
VALUE
UNIT
(I/A)
0.850
mm1
Ve
effective volume
35 200
mm3
Ie
effective length
173
mm
Ae
effective area
204
mm2
85
handbook, halfpage
67.3 1.3
38.8 0.8
12.7
0.25
2.36
27
0.15
2.36
14.3
0.4
MGB554
Dimensions in mm.
GRADE
TYPE NUMBER
3C81
3800 25%
2570
U67/27/14-3C81
3C91
3800 25%
2570
U67/27/14-3C91
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 100 kHz;
= 200 mT;
B
T = 100 C
320
8.1
2.1 (1)
16(1)
3C81
3C91
320
Note
1. Measured at 60 C.
2013 Jul 31
859
Ferroxcube
U80/65/32
U CORES
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
mm1
(I/A)
0.439
Ve
effective volume
219000 mm3
Ie
effective length
310
mm
79.8 1.8
35.2 1.2
Ae
effective area
706
mm2
Amin
minimum area
704
mm2
560
31.7 0.7
42.4
0.9
64.6
0.5
6.6
0.1
R 3.0 max
5
Dimensions in mm.
3C90
6000 25 %
2095
U80/65/32-3C90
3F3
5340 25 %
1865
U80/65/32-3F3
GRADE
TYPE NUMBER
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C90
320
30
32
3F3
320
34
GRADE
2013 Jul 31
860
f = 100 kHz;
= 100 mT;
B
T = 100 C
MFP143
Ferroxcube
U93/52/30
U CORES
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
mm1
(I/A)
0.307
Ve
effective volume
217000 mm3
Ie
effective length
258
mm
Ae
effective area
840
mm2
560
36.2 1.2
handbook, halfpage
52
0.5
24
0.45
93 1.8
28
2
30
0.6
MGC200
Dimensions in mm.
3C90
8700 25%
2100
U93/52/30-3C90
3C94
8700 25%
2100
U93/52/30-3C94
GRADE
TYPE NUMBER
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
3C90
320
28
38
3C94
320
30
GRADE
2013 Jul 31
861
Ferroxcube
U93/76/16
U CORES
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
93
handbook, halfpage
mm1
(I/A)
0.790
Ve
effective volume
159000 mm3
Ie
effective length
354
mm
Ae
effective area
448
mm2
400
76
0.5
1.8
36.2
28
1.2
48
0.9
16
0.6
MBA288
Dimensions in mm.
3C90
3400 25%
2200
U93/76/16-3C90
3C94
3400 25%
2200
U93/76/16-3C94
GRADE
TYPE NUMBER
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
3C90
320
20
23
3C94
320
18
GRADE
2013 Jul 31
862
Ferroxcube
I93/28/16
CORE SETS
handbook, halfpage
PARAMETER
VALUE
16
0.6
93 1.8
27.5
0.5
UNIT
0.576
Ve
effective volume
115000 mm3
Ie
effective length
258
mm
Ae
effective area
447
mm2
mass of core
200
mm1
(I/A)
CBW141
0.33
15
4.0
Detail A
Dimensions in mm.
Core data
AL measured in combination with U93/76/16.
GRADE
AL
(nH)
TYPE NUMBER
3C90
4600 25%
2100
I93/28/16-3C90
3C94
4600 25%
2100
I93/28/16-3C94
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C90
320
15
16
3C94
320
13
GRADE
2013 Jul 31
863
f = 100 kHz;
= 100 mT;
B
T = 100 C
Ferroxcube
U93/76/30
U CORES
Effective core parameters
SYMBOL
PARAMETER
VALUE
handbook, halfpage
UNIT
mm1
(I/A)
0.421
Ve
effective volume
297000 mm3
Ie
effective length
354
mm
Ae
effective area
840
mm2
760
93
1.8
36.2
1.2
28
48
0.9
76
0.5
30
0.6
MBA286
Dimensions in mm.
3C90
6400 25%
2200
U93/76/30-3C90
3C94
6400 25%
2200
U93/76/30-3C94
GRADE
TYPE NUMBER
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
3C90
320
40
52
3C94
320
39
GRADE
2013 Jul 31
864
Ferroxcube
I93/28/30
CORE SETS
Effective core parameters in combination with
U93/52/30
SYMBOL
PARAMETER
VALUE
UNIT
mm1
(I/A)
0.251
Ve
effective volume
175000 mm3
Ie
effective length
210
mm
Ae
effective area
836
mm2
mass of core
370
handbook, halfpage
PARAMETER
VALUE
30 0.6
27.5
0.5
A
0.33
93 1.8
15
UNIT
CBW142
4.0
Detail A
mm1
(I/A)
0.307
Ve
effective volume
217000 mm3
Ie
effective length
258
mm
Ae
effective area
840
mm2
mass of core
370
Dimensions in mm.
Core data
GRADE
3C90
3C94
AL (nH)
10700 25%(1)
2150
8 700 25%(2)
2150
10700 25%(1)
2150
8 700 25%(2)
2150
TYPE NUMBER
I93/28/30-3C90
I93/28/30-3C94
Notes
1. Measured in combination with U93/52/30.
2. Measured in combination with U93/76/30.
Properties of core sets under power conditions
B (mT) at
GRADE
3C90
3C94
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
330
24(1)
31(1)
330
28(2)
38(2)
330
24(1)
330
30(2)
Notes
1. Measured in combination with U93/52/30.
2. Measured in combination with U93/76/30.
2013 Jul 31
865
Ferroxcube
U100/57/25
U CORES
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
mm1
(I/A)
0.478
Ve
effective volume
Ie
effective length
308
mm
Ae
effective area
645
mm2
500
handbook, halfpage
57.1
0.4
101.6
50.8
25.4
0.8
31.7
0.75
25.4
0.8
MBA291
Dimensions in mm.
3C90
5500 25%
2200
U100/57/25-3C90
3C94
5500 25%
2200
U100/57/25-3C94
GRADE
TYPE NUMBER
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
3C90
320
26
32
3C94
320
26
GRADE
2013 Jul 31
866
Ferroxcube
I100/25/25
CORE SETS
Effective core parameters in combination with
U100/57/25
SYMBOL
PARAMETER
VALUE
UNIT
mm1
(I/A)
0.379
Ve
effective volume
158000 mm3
Ie
effective length
245
mm
Ae
effective area
645
mm2
mass of core
300
handbook, halfpage
25.4
0.8
101.6 2
25.4
0.8
2
CBW143
Dimensions in mm.
3C90
6700 25%
2150
I100/25/25-3C90
3C94
6700 25%
2150
I100/25/25-3C94
GRADE
TYPE NUMBER
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C90
330
21
25
3C94
330
21
GRADE
2013 Jul 31
867
f = 100 kHz;
= 100 mT;
B
T = 100 C
Ferroxcube
U126/91/20
U CORES
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
mm1
(I/A)
0.857
Ve
effective volume
268800 mm3
Ie
effective length
480
mm
Ae
effective area
560
mm2
Amin
minimum area
560
mm2
680
126 4
handbook, halfpage
70 2
63 2
91 1
20
0.6
MFP073
Dimensions in mm.
3C90
3000 25 %
2050
U126/91/20-3C90
3C94
3000 25 %
2050
U126/91/20-3C94
GRADE
TYPE NUMBER
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C90
320
35
40
3C94
320
32
GRADE
2013 Jul 31
868
f = 100 kHz;
= 100 mT;
B
T = 100 C
Ferroxcube
Soft Ferrites
2013 Jul 31
869
Ferroxcube
Soft Ferrites
UR cores
CBW628
2013 Jul 31
870
Ferroxcube
UR cores
UR cores
PRESENT TYPES
Our present selection is displayed in Table 2. In principle, any core shape can be supplied in all available grades.
Other customized shapes can be manufactured on request.
A
D
TYPE 1
TYPE 3
TYPE 2
TYPE 4
E
C
MEA765
2013 Jul 31
871
Ferroxcube
UR cores
UR cores
Mechanical data
Table 1
DIMENSIONS
(mm)
DESCRIPTION
SHAPE
A
Dmin
C1
(mm1)
Ve
(mm3)
Ie
Ae
MASS
(mm) (mm2)
(g)
UR35/27.5/13
35.4
17.5
13.0
12.0
10.0
27.5
1.00
16640
129
129
41
UR37/26/18
36.9
16.8
14.7
13.9
7.3
25.7
0.865
18900
128
148
55
UR39/35/15
38.7
24.8
14.9
15.0
9.1
35.2
1.094
24300
163
149
64
UR42/21/12
41.8
11.1
11.9
18.2
11.9
20.6
1.09
11800
113
104
31
UR46/21/11
46.2
11.85 11.15
24.4
11.15 21.25
1.47
11600
129
88
29
UR48/39/17
48.0
26.9
17.4
13.0
0.865
39 990
186
215
100
17.0
39.4
UR55/38/36
54.9
25.5
23.5
19.6
12.0
37.5
0.450
78570
188
418
198
UR57/28/16
57.65
16.0
15.5
26.9
15.9
28.4
0.953
27900
163
171
70
UR59/36/17
59.34
21.9
17.0
25.5
17.0
35.8
0.900
39700
189
210
99
UR64/29/14
64.0
18.1
13.8
36.1
13.8
29.5
1.26
27 040
185
147
64
UR64/40/20
64.0
26.5
20.0
23.2
20.0
40.5
0.724
61 000
210
290
160
UR64/40/20-D
64.0
26.5
20.0
23.2
20.0
40.5
UR70/33/17
68.37
19.05 17.25
35.0
17.25 33.35
0.685
64900
211
308
168
0.921
43800
197
214
103
Type numbers
Table 2
MATERIAL GRADE
SHAPE
3C81
1
3C30
UR37/26/18-3C90
1
2
3C90
UR35/27.5/13-3C30
UR39/35/15-3C90
UR42/21/12-3C81
UR46/21/11-3C90
UR48/39/17-3C30
UR55/38/36-3C90
UR57/28/16-3C30
UR57/28/16-3C90
UR59/36/17-3C30
UR59/36/17-3C90
UR64/29/14-3C81
UR64/29/14-3C90
UR64/40/20-3C90
UR64/43/20-3C90
UR70/33/17-3C90
2013 Jul 31
872
Ferroxcube
Soft Ferrites
2013 Jul 31
873
Ferroxcube
Ferroxtag RFID
transponders
Soft Ferrites
MFP235
MFP235
2013 Jul 31
874
Ferroxcube
Soft Ferrites
FERROXTAG
Smart on metal, Smart on liquid, Smart at speed
Ferroxtag is a new family of RFID (Radio Frequency
IDentification) tags suitable for operation attached to
metallic items, such as totes, barrels, gas cylinders and
industrial equipment. Operation frequency is 13.56 MHz.
Ferroxtag's key feature is the direction of the field
activating the device : it is not perpendicular to the
identified item but parallel to it ; this means that the
performance is almost independent of the material of the
item identified. There's no need to worry about
electromagnetic reflection on metals.
The Ferroxtag core is an outstanding high magnetic
permeability ferrite material that enhances the
performance of the winding, thus reducing the dimensions
of the coil. There are 3 versions of the tag :
screw box, circuit mount and L-shape.
MFP236
Applications
Asset tracking
Food traceability
Process control
Personal identification
Counterfeiting prevention
Luggage tracking
Animal identification
More information on RFID and Ferroxtag, including news :
www.ferroxtag.com
PRODUCT DESCRIPTION
General
SCREW BOX
CIRCUIT MOUNT
L-SHAPE
a High Frequency (13.56 MHz) RFID tag optimized for identification of metallic items.
Supports ISO15693 and ISO18000-3 air interface.
It can be soldered on a PCB like any An ID number bar code is printed on
It can be screwed to the item and/or
the encapsulation. This allows fast
SMD component.
stuck on it with the bottom side
The reading range is 30 cm on metal. automatic reading through RFID
adhesive tape.
technology and reading with a
The reading range is 30 cm on metal. Overall dimensions are 15 x 8 x 2.5
standard bar code reader.
Overall dimensions are 25 x 12.5 x 5 mm.
The reading range is 35 cm.
mm, including the holes for screws.
The encapsulation protects the device
while it eases the mounting on the
corner of the item by means of the
adhesive sticker supplied in the back.
2013 Jul 31
875
Ferroxcube
Soft Ferrites
CIRCUIT MOUNT
Operating temperature 25...130 C
Dimensions 15 x 8 x 2.5 mm
Weight 2.5 grams
Connection to PCB Soldering as
SMD component
L-SHAPE
Operating temperature 25...60 C
Dimensions 42 x 20 x 12 mm
Weight 3.5 grams
Case material ABS
Degree of protection IP68
Colors Black, others upon request
Connection to items Glued or stuck
Functional properties
SCREW BOX
CIRCUIT MOUNT
L-SHAPE
Operating frequency 13.56 MHz (ISM, licence free)
Air interface ISO 15693, ISO 18000-3
Readable and writable with most common HF readers
Unique identifier 8 bytes
EEPROM memory 1024 bits, 32 blocks of 4 bytes
Anticollision support Yes
Data transfer Up to 53 kbits/sec
Reading range On metal 30 cm (typical for 4 watts reader)
Reading range 35 cm (typical for 4
watts reader)
Bar code printing Thermally printed
on 12 x 24 mm sticker
Bar code ID Last 4 bytes of the tag ID
(8 hex characters)
Thanks to the double identification
The outstanding reading range in such a small package combined with the
ability to work around metals makes Ferroxtag an ideal alternative for both low (RFID and bar code) it possible to
identify the item in the field with a hand
and high frequency tags.
held bar code reader.
Product types
SHAPE
Screw box
SEALING
silicone
L-shape
ABS
COLOUR
black
brown
blue
white
black
Circuit mount
none
not applicable
epoxy
2013 Jul 31
PRETUNING
none
metal plate
none
metal plate
none
none
metal plate
876
BAR CODE
none
PACKING
bulk
none
sticker
none
blister tape
Ferroxcube
RFID transponder
cores
Soft Ferrites
MFP229
2013 Jul 31
877
Ferroxcube
Soft Ferrites
INTRODUCTION
Applications
Automotive
Wireless sensors
Asset tracking
Food traceability
Process control
Personal identification
Counterfeiting prevention
Luggage tracking
Animal identification
2013 Jul 31
878
Ferroxcube
Soft Ferrites
2013 Jul 31
879
Ferroxcube
Soft Ferrites
EMI-suppression products
CBW256
2013 Jul 31
880
Ferroxcube
Soft Ferrites
EMI-suppression products
DESCRIPTION
BAR
bar
BC
bobbin core
BD
bead
BDS
bead SMD
BDW
bead on wire
CLI-CSU
CMS
CSA
CSA-EN
CSC
CSC-EN
CSF
CST
CSU
CSU-EN
FAR
FXF
FXT
MHB
MHC
MHR
MLH
MLI
multilayer inductor
MLN
MLP
MLS
multilayer suppressor
ROD
rod
TUB
tube
WBC
wideband choke
WBS
WBSM
TAR
TC
TL
TN
TX
2013 Jul 31
881
Ferroxcube
EMI-suppression products
PCB
Ferroxfoil sheet
Metal casing
FerroxFoil
sheet
Signal lines
PCB
MFP230
FerroxFoil sheet
Flat cable
2013 Jul 31
882
Ferroxcube
EMI-suppression products
5W1
5R1
5F1
5T1
2013 Jul 31
883
Ferroxcube
EMI-suppression products
MFP231
-2
5F1
MFP232
-4
-6
5R1
-8
5W1
-10
-12
-2
-4
5F1
-6
5R1
-8
5W1
-10
-12
-14
-14
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
0.5
1.0
1.5
Frequency (GHz)
Fig.1
2.5
3.0
Frequency (GHz)
3.5
4.0
4.5
5.0
MFP233
100%
MFP234
90%
80%
-10
5W1
70%
5R1
-20
60%
50%
S21 (dB)
2.0
5F1
40%
-30
-40
30%
5R1
20%
-50
5F1
5W1
10%
-60
0%
0
Fig.3
2013 Jul 31
3
Frequency (GHz)
Fig.4
884
4
6
Frequency (GHz)
10
Ferroxcube
EMI-suppression products
Bobbin cores
BOBBIN CORES
Type BC13/4.8/16
AL measured with fully wound bobbin.
GRADE
AL (nH)
3C90
50
handbook, halfpage
3 (2)
TYPE NUMBER
BC13/4.8/16-3C90
4.8
0.2
AVERAGE LENGTH
OF TURN
(mm)
38.8
27.3
12.8
0
0.5
10
16
CBW147
Dimensions in mm.
Fig.1 BC13/4.8/16.
Type BC22/12/14
AL measured with fully wound bobbin.
GRADE
AL (nH)
3C90
86
handbook, halfpage
BC22/12/14-3C90
12
0.3
3.3
AVERAGE LENGTH
OF TURN
(mm)
WINDING AREA
(mm 2)
43.0
;
;;;
;;;
;
2.7 (2)
TYPE NUMBER
6
0.3
22 1
53.4
6 +0.1
0.3
8.6 0.6
14 1
CBW148
Dimensions in mm.
Fig.2 BC22/12/14.
Type BC22/12/18
AL measured with fully wound bobbin.
GRADE
AL (nH)
3C90
85
handbook, halfpage
BC22/12/18-3C90
63.0
12
0.3
3.3
;
;;;
;;;
;
2.7 (2)
TYPE NUMBER
AVERAGE LENGTH
OF TURN
(mm)
5
22 1
53.4
1
12.6
0.6
18 1
Dimensions in mm.
Fig.3 BC22/12/18.
2013 Jul 31
885
6 +0.1
0.3
CBW149
6
0.3
Ferroxcube
EMI-suppression products
Bobbin cores
Type BC22/12/19
AL measured with fully wound bobbin.
GRADE
AL(nH)
3C90
94
handbook, halfpage
BC22/12/19-3C90
12
0.3
3.3
AVERAGE LENGTH
OF TURN
(mm)
WINDING AREA
(mm 2)
52.5
;
;;;
;;;
;
4 (2)
TYPE NUMBER
0.75
22 1
53.4
4.5
0.15
6
0.3
10.5 +0.6
0
18.5 1
CBW150
Dimensions in mm.
Fig.4 BC22/12/19.
Type BC22/12/38
AL measured with fully wound bobbin.
GRADE
AL(nH)
3C90
74
4 (2)
TYPE NUMBER
handbook, halfpage
AVERAGE LENGTH
OF TURN
(mm)
WINDING AREA
(mm 2)
12
0.3
3.3
150
;;
;;
;
;
;;
;;
4.5
0.15
BC22/12/38-3C90
0.75
+1.4
0
38 1.4
30
22 1
53.4
6
0.3
CBW151
Dimensions in mm.
Fig.5 BC22/12/38.
Type BC23/12/14
AL measured with fully wound bobbin.
GRADE
AL(nH)
3C90
92
handbook, halfpage
4.2 +0.6
0
BC23/12/14-3C90
12
0.3
;
;;;
;;;
;
2.7 (2)
TYPE NUMBER
AVERAGE LENGTH
OF TURN
(mm)
22.6 1
0.75
8.6
0.6
14 1
54.3
Dimensions in mm.
Fig.6 BC23/12/14.
2013 Jul 31
886
CBW152
6
0.3
Ferroxcube
EMI-suppression products
Cable shields
handbook, halfpage
L
For dimensions
see Table 1.
CBW153
Table 1
TYPE NUMBER
CST7.8/5.3/9.8-3S4
CST8/5.3/10-3S4
CST8.3/3.5/10-3S4
CST9.5/4.8/4.8-4S2
CST9.5/4.8/6.4-4S2
CST9.5/4.8/9.5-4S2
CST9.5/4.8/10-4S2
CST9.5/4.8/13-4S2
CST9.5/4.8/19-4S2
CST9.5/5.1/15-3S4
CST9.5/5.1/15-4S2
CST9.7/5/5.1-4S2
CST14/6.4/5.3-4S2
CST14/6.4/10-4S2
CST14/6.4/14-4S2
CST14/6.4/15-4S2
CST14/6.4/29-4S2
CST14/7.3/29-4S2
CST16/7.9/14-4S2
CST16/7.9/29-4S2
CST17/9.5/13-3S4
CST17/9.5/13-4S2
2013 Jul 31
| Ztyp |(1) () at
DIMENSIONS
D
7.8 0.2
8 0.4
8.3 0.4
9.5 0.25
9.5 0.25
9.5 0.25
9.5 0.25
9.5 0.25
9.5 0.25
9.5 0.3
9.5 0.3
9.65 0.25
14.3 0.45
14.3 0.45
14.3 0.45
14.3 0.45
14.3 0.45
14.3 0.45
16.25 0.75
16.25 0.75
17.45 0.35
17.45 0.4
5.3 +0.3
5.3 +0.3
3.5 +0.3
4.75 0.25
4.75 0.25
4.75 0.15
4.75 0.15
4.75 0.15
4.75 0.15
5.1 0.15
5.1 0.15
5 0.2
6.35 0.25
6.35 0.25
6.35 0.25
6.35 0.25
6.35 0.25
7.25 0.15
7.9 0.25
7.9 0.25
9.53 0.25
9.5 0.25
9.8 0.2
10 0.4
10 0.6
4.8 0.2
6.35 0.35
9.5 0.3
10.4 0.25
12.7 0.5
19.05 0.7
14.5 0.45
14.5 0.45
5.05 0.45
5.3 0.45
10.1 0.4
13.8 0.4
15 0.45
28.6 0.75
28.6 0.75
14.3 0.35
28.6 0.75
12.7 0.5
12.7 0.5
887
25 MHz
33
36(2)
70
18
23
40
53
60
100
66
66
26
35
70
90
100
170
143
70
130
55
55
100 MHz
50
50
96
35
50
70
80
95
145
110
110
43
60
105
150
170
250
215
113
213
90
88
Ferroxcube
EMI-suppression products
TYPE NUMBER
CST17/9.5/29-3S4
CST17/9.5/29-4S2
CST17/11/60-3S4
CST19/10/15-4S2
CST19/10/29-4S2
CST19/11/12-3S4
CST26/13/21-4S2
CST26/13/29-4S2
CST29/19/7.5-4S2
Cable shields
17.45 0.35
17.45 0.35
17.2 1.2
19 0.65
19 0.65
19 0.4
25.9 0.75
25.9 0.75
29 0.75
9.53 0.25
9.53 0.25
11 0.5
10.15 0.25
10.15 0.25
10.6 0.3
12.8 0.25
12.8 0.25
19 0.5
28.55 0.75
28.55 0.75
60 2.5
14.65 0.75
28.6 0.75
11.5 0.4
21.3 0.5
28.6 0.8
7.5 0.25
Note
1. Minimum guaranteed impedance is Ztyp 20%.
2. At 30 MHz.
2013 Jul 31
| Ztyp |(1) () at
DIMENSIONS
888
25 MHz
100 MHz
125
125
200
70
128
50
110
145
28
200
250
320
110
196
75
180
225
47
Ferroxcube
EMI-suppression products
Cable shields
A
B
handbook, halfpage
D
B
CBW154
D
CBW155
handbook, halfpage
CE
handbook, halfpage
A
B
CBW156
D
CBW157
2013 Jul 31
889
Ferroxcube
EMI-suppression products
Cable shields
General data
ITEM
SPECIFICATION
Case material polyamide (PA66), glass reinforced, flame retardant in accordance with UL94V-0,
grade A82, colour black
Table 2
TYPE NUMBER
| Ztyp |(1) () at
DIMENSIONS
FIG.
A
6.6 0.3
28.6 0.8
7.5 0.15
165
275
CSA19/9.4/29-4S2
18.65 0.4
15 0.25
10.15 0.3
28.6 0.8
9.4 0.15
140
225
CSA26/13/29-4S2
25.9 0.5
13.05 0.3
28.6 0.8
12.8 0.25
155
250
CSC16/7.9/14-4S2
15.9 0.4
7.9 0.3
14.3 0.4
7.95 0.2
50
113
275
2+3
17.9
7.0
32.3
9.2
9.0
165
17.9
7.0
32.3
9.2
9.0
2+3
22.1
10.2
32.3
11.7
9.0
140
225
22.1
10.2
32.3
11.7
9.0
29
13.4
32.5
14.8
18.0
155
250
29
2+3
13.4
32.5
14.8
18.0
4+5
24.7
7.6
22.8
10.2
17.8
50
24.7
7.6
22.8
10.2
17.8
Note
1. Minimum guaranteed impedance is Ztyp 20%.
2013 Jul 31
890
113
Ferroxcube
EMI-suppression products
Cable shields
D
C
A
C
A B
handbook, halfpage
MFP074
a.
b.
2013 Jul 31
891
c.
Ferroxcube
EMI-suppression products
Cable shields
General data
ITEM
SPECIFICATION
Case material polyamide (PA66), glass reinforced, flame retardant in accordance with UL94V-0,
grade A82, colour black
Clip material
Table 3
DIMENSIONS
TYPE NUMBER
FIG.
A
6a
45.1 0.75 34.4 0.7 28.6 0.7 6.35 0.25 0.85 0.2
96
225
CSU76/6.4/13-3S4
6a
76.2 1.5
36
110
CSU76/6.4/15-3S4
6a
76.2 1.5
50
159
CSU76/6.4/29-4S2
6a
76.2 1.5
75
215
CSU76/6.4/29-3S4
6a
76.2 1.5
70
235
CLI-CSU6.4
6c
225
16.1
11.0
12.7
11.4
8.0
6a+b
49.5
34.3
32.3
8.1
20
96
6b
49.5
34.3
32.3
8.1
20
6a+b
80.8
65.5
32.3
8.1
50.8
75
215
6b
80.8
65.5
32.3
8.1
50.8
Note
1. Minimum guaranteed impedance is Ztyp 20%.
2013 Jul 31
892
Ferroxcube
EMI-suppression products
Cable shields
A
D
handbook, halfpage
A
handbook, halfpage
A
D
B E
E
CBW161
CBW162
AA
DIMENSIONS
TYPE NUMBER
FIG.
A
38.1 1.0 12.1 0.35 25.4 0.75 26.7 0.75 1.9 0.35
CSF38/12/25-3S4-S
Note
1. Minimum guaranteed impedance is Ztyp 20%.
2013 Jul 31
893
25.4 0.8
26.8 0.8
1.9 0.4
110
215
98
196
Ferroxcube
EMI-suppression products
EMI-suppression beads
;;;;
;;;;
;;;;
EMI-SUPPRESSION BEADS
Colour marking: 4S2 has a flash of yellow paint.
handbook, halfpage
Note
MBA034
GRAD
E
3S1
4S2
2013 Jul 31
DIMENSIONS
(mm)
at frequency (MHz)
25
30
100 300
TYPE NUMBER
10
24
48
49
39
33
29
3 0.1
0.7 +0.1
4 0.2
L
BD3/0.7/4-3S1
41
90
91
74
63
55
3 0.1
1 +0.1/0.05
10 0.3
BD3/1/10-3S1
34
65
66
53
45
40
5.1 0.3
0.75 +0.1
4 0.2
BD5.1/0.8/4-3S1
88 156
160
113
88
63
5.1 0.3
0.75 +0.1
10 0.3
BD5.1/0.8/10-3S1
BD5.1/1.5/4-3S1
16
28
40
33
28
25
5.1 0.3
1.5 +0.15
4 0.2
50
90
100
80
69
60
5.1 0.3
1.5 +0.15
10 0.3
13
23
30
25
21
19
5.1 0.3
2 +0.2
4 0.2
BD5.1/2/4-3S1
36
64
76
61
53
46
5.1 0.3
2 +0.2
10 0.3
BD5.1/2/10-3S1
20
35
54
69
76
1.9 +0.2
0.8 +0.2
9.75 0.2
10
28
40
63
68
3 0.1
0.7 +0.1
4 0.2
11
23
31
48
54
3 0.1
1 +0.1/0.05
4 0.2
BD3/1/4-4S2
29
54
76
119 134
3 0.1
1 +0.1/0.05
10 0.3
BD3/1/10-4S2
27
40
3.5 0.2
1.3 0.1
3.25 0.25
47
60
3.5 0.2
1.3 0.1
6 0.25
12.7 0.35
89
125
3.5 0.2
1.3 0.1
19
38
55
85
96
5.1 0.3
0.75 +0.1
4 0.2
213 238
15
50
94
138
13
25
34
31
56
85
10
19
25
BD5.1/1.5/10-3S1
BD1.9/0.8/9.8-4S2
BD3/0.7/4-4S2
BD3.5/1.3/3.3-4S2
BD3.5/1.3/6-4S2
BD3.5/1.3/13-4S2
BD5.1/0.8/4-4S2
5.1 0.3
0.75 +0.1
10 0.3
BD5.1/0.8/10-4S2
59
5.1 0.3
1.5 +0.15
4 0.2
BD5.1/1.5/4-4S2
130 145
5.1 0.3
1.5 +0.15
10 0.3
5.1 0.3
2 +0.2
4 0.2
51
BD5.1/1.5/10-4S2
40
45
BD5.1/2/4-4S2
78
5.1 0.3
2 +0.2
7.1 0.2
BD5.1/2/7.1-4S2
100 111
5.1 0.3
2 +0.2
10 0.3
BD5.1/2/10-4S2
34
19
38
64
135
200
6.35 0.15
2.95 +0.45
25.4 0.75
BD6.4/3/25-4S2
63
92
7.65 0.25
2.25 +0.25
7.55 0.25
BD7.7/2.3/7.6-4S2
48
71
81
8 0.2
1.5 +0.15
4 0.2
BD8/1.5/4-4S2
181 201
8 0.2
1.5 +0.15
10 0.3
BD8/1.5/10-4S2
18
34
13
43
88
116
13
25
39
11
35
69
96
10
19
28
25
50
69
69
8 0.2
2 +0.2
4 0.2
BD8/2/4-4S2
151 168
8 0.2
2 +0.2
10 0.3
BD8/2/10-4S2
48
8 0.2
3 +0.2
4 0.2
BD8/3/4-4S2
106 119
8 0.2
3 +0.2
10 0.3
BD8/3/10-4S2
61
43
894
Ferroxcube
EMI-suppression products
OD
Od
L
l
MGC243
Table 1
4S2
DIMENSIONS
(mm)
at frequency (MHz)
GRADE
1
10
25
30
100
300
4
5
6
8
9
10
13
16
21
25
28
33
24
33
44
49
55
65
54
96
117
143
36
49
66
74
84
98
58
75
82
100
110
131
146
150
180
220
65
88
119
131
150
175
3.5 0.2
3.5 0.5
3.5 0.2
4.7 0.5
3.5 0.25 5.25 0.25
3.5 0.2 6.0 0.25
3.5 0.2 6.7 0.25
3.5 0.2 7.6 0.35
3.5 0.2 8.9 0.35
3.5 0.25 9.5 0.3
3.5 0.25 11.4 0.4
3.5 0.25 13.8 0.5
TYPE NUMBER
l
64.4
64.4
64.4
64.4
64.4
64.4
64.4
64.4
64.4
64.4
0.64
0.64
0.64
0.64
0.64
0.64
0.64
0.64
0.64
0.64
BDW3.5/3.5-4S2
BDW3.5/4.7-4S2
BDW3.5/5.3-4S2
BDW3.5/6-4S2
BDW3.5/6.7-4S2
BDW3.5/7.6-4S2
BDW3.5/8.9-4S2
BDW3.5/9.5-4S2
BDW3.5/11-4S2
BDW3.5/14-4S2
Note
1. Typical values at 25 and 100 MHz, Zmin is 20%. Other impedance values are for reference only.
2013 Jul 31
895
Ferroxcube
EMI-suppression products
handbook, halfpage
d
H
MFP119
Table 1
DIMENSIONS (mm)
GRADE
H
3.6 0.3
2.1 0.3
1.4 0.2
0.8 + 0.15
3.6 0.3
3.6 0.3
3.6 0.3
3.6 0.3
3.6 0.3
2013 Jul 31
2.1 0.3
2.1 0.3
2.1 0.3
2.1 0.3
2.1 0.3
1.8 0.2
2 0.2
2.5 0.2
3 0.2
3.5 0.2
0.8 + 0.15
0.8 + 0.15
0.8 + 0.15
0.8 + 0.15
0.8 + 0.15
896
3C11
TYPE NUMBER
MHB2-3.6/2.1/1.4-3C11
4A11
MHB2-3.6/2.1/1.4-4A11
4B1
MHB2-3.6/2.1/1.4-4B1
3C11
MHB2-3.6/2.1/1.8-3C11
4A11
MHB2-3.6/2.1/1.8-4A11
4B1
MHB2-3.6/2.1/1.8-4B1
3C11
MHB2-3.6/2.1/2-3C11
3C90
MHB2-3.6/2.1/2-3C90
3E25
MHB2-3.6/2.1/2-3E25
3E7
MHB2-3.6/2.1/2-3E7
4A11
MHB2-3.6/2.1/2-4A11
4B1
MHB2-3.6/2.1/2-4B1
4C65
MHB2-3.6/2.1/2-4C65
3C11
MHB2-3.6/2.1/2.5-3C11
3C90
MHB2-3.6/2.1/2.5-3C90
4A11
MHB2-3.6/2.1/2.5-4A11
4B1
MHB2-3.6/2.1/2.5-4B1
3C11
MHB2-3.6/2.1/3-3C11
3C90
MHB2-3.6/2.1/3-3C90
3E25
MHB2-3.6/2.1/3-3E25
4A11
MHB2-3.6/2.1/3-4A11
4B1
MHB2-3.6/2.1/3-4B1
3C11
MHB2-3.6/2.1/3.5-3C11
4A11
MHB2-3.6/2.1/3.5-4A11
4B1
MHB2-3.6/2.1/3.5-4B1
Ferroxcube
EMI-suppression products
DIMENSIONS (mm)
GRADE
H
5.1 0.3
3 0.2
2 0.2
1.2 0.1
5.1 0.3
5.1 0.3
7 0.4
7 0.4
7 0.4
7 0.4
2013 Jul 31
3 0.2
3 0.2
4 0.2
4 0.2
4 0.2
4 0.2
3 0.2
4 0.2
4 0.2
5 0.2
6 0.2
7 0.2
1.2 0.1
1.2 0.1
1.8 0.1
1.8 0.1
1.8 0.1
1.8 0.1
897
TYPE NUMBER
3C90
MHB2-5/3/2-3C90
4A11
MHB2-5/3/2-4A11
4B1
MHB2-5/3/2-4B1
3C90
MHB2-5/3/3-3C90
4A11
MHB2-5/3/3-4A11
4B1
MHB2-5/3/3-4B1
3C90
MHB2-5/3/4-3C90
4A11
MHB2-5/3/4-4A11
4B1
MHB2-5/3/4-4B1
3C90
MHB2-7/4/4-3C90
4A11
MHB2-7/4/4-4A11
4B1
MHB2-7/4/4-4B1
3C90
MHB2-7/4/5-3C90
4A11
MHB2-7/4/5-4A11
4B1
MHB2-7/4/5-4B1
3C90
MHB2-7/4/6-3C90
4A11
MHB2-7/4/6-4A11
4B1
MHB2-7/4/6-4B1
4B1
MHB2-7/4/7-4B1
Ferroxcube
EMI-suppression products
Multihole cores
MULTIHOLE CORES
Table 1
GRADE
TYPE NUMBER
D
4B1
5.6 0.15
1.5 0.15
12 0.2
MHC2-5.6/12-4B1
6.6 0.6
1.05 +0.3
5 0.2
MHC2-6.6/5-4B1
;;;
;;;
;;;
handbook, halfpage
MGC197
GRADE
3S4
4B1
TYPE NUMBER
D
6 0.3
0.7 +0.2
10 0.5
6 0.3
0.7 +0.2
10 0.5
MHC6-6/10-4B1
6 0.3
0.7 +0.2
5 0.2
MHC6-6/5-4B1
;;;;;;
;;;;;;
;;;;;;
;;;;;;
handbook, halfpage
MHC6-6/10-3S4
45 o
45 o
d
D
2013 Jul 31
898
MGC194
Ferroxcube
EMI-suppression products
Table 3
Multihole cores
GRADE
4B1
3C90
DIMENSIONS (mm)
D
TYPE NUMBER
8.5 0.5
3.5 +0.5
8 0.3
14 0.5
MHB2-14/8.5/8-4B1
8.5 0.5
3.5 +0.5
14 0.4
14 0.5
MHB2-14/8.5/14-4B1
8.0 0.3
3 0.3
6 0.3
13 0.3
MHB2-13/8/6-4B1 (1)
8.0 0.3
3 0.3
6 0.3
13 0.3
MHB2-13/8/6-3C90(1)
Note
1. Chamfered holes and sides.
handbook, halfpage
d
H
MGC196
GRADE
DIMENSIONS (mm)
TYPE NUMBER
4A11
5.4 0.3
2.0 0.3
10.9 0.4
10.8 0.3
MHR2-11/5.4/11-4A11
3C90
5.4 0.3
2.0 0.3
10.9 0.4
10.8 0.3
MHR2-11/5.4/11-3C90
handbook, halfpage
d
H
MGC198
2013 Jul 31
899
Ferroxcube
EMI-suppression products
Table 5
Multihole cores
GRADE
3B1
DIMENSIONS (mm)
TYPE NUMBER
4 0.2
0.7 +0.3
10 0.5
6.1 0.3
handbook, halfpage
2013 Jul 31
900
MGC195
MHR6-6.1/4/10-3B1
Ferroxcube
Multilayer inductors
EMI-suppression products
MULTILAYER INDUCTORS
Our range of multilayer inductors offers magnetic
shielding, in five standard sizes (0402, 0603, 0805,
080505 and 1206), which are specially designed for
miniaturized electronic products. It offers minimum flux
leakage thus eliminating cross talk. They have
inductances between 1 nH and 18 mH.
Main applications areas for multilayer inductors are:
computer and peripheral equipment: mother board,
notebook, CD-Rom, DVD-Rom, CD-RW, scanner, hard
disc, VGA card, sound card, LCD monitor, printer, PC
server thumb drive, PCMCIA card, graphic card, etc.
network: LAN card, hub, switcher, router set top box,
etc.
Features
Monolithic structure for closed magnetic path and high
reliability.
Standard EIA and EIAJ sizes: 0402, 0603, 0805,
080505, 1206.
This multilayer chip inductor results in magnetic
shielding: the absence of leakage flux makes it most
suitable for high density mounting.
Suitable for wave and reflow soldering.
Plating material lead-free
Wide range of inductance values.
Superior physical properties.
Available in standard EIA and EIAJ tape-and-reel.
Operating temperature -40C to +125C.
100% sorting out on inductance.Product construction
2013 Jul 31
901
Ferroxcube
Multilayer inductors
EMI-suppression products
TYPE NUMBER STRUCTURE
TYPE
Product type
MLI
SIZE
INDUCTANCE
TOLERANCE
0805
0.68 H
10%
Size
Inductance
Tolerance
TYPE
MLH
Product type
MLI: Multilayer Inductor.
MLH: Multilayer inductor High frequency.
Size
0402: 1.0 0.5 0.5mm
0603: 1.6 0.8 0.8mm
0805: 2.0 1.25 0.9mm
080505: 2.0 1.25 1.25mm
1206: 3.2 1.6 1.1mm
Inductance values
Expressed in nH or H
Different ways to indicate the values are used.
EXAMPLES
4N7: 4.7 nH
82N: 82 nH
R10: 0.1 H
1R8: 1.8 H
820: 82 H
151: 150 H
Tolerance
The last 2 digits represent the tolerance:
05%, 10% or 20%
In MLH 03 the tolerance has the absolute value of
0.3 nH.
2013 Jul 31
902
SIZE
INDUCTANCE
TOLERANCE
0402
4.7 nH
0.3 nH
Ferroxcube
Multilayer inductors
EMI-suppression products
MULTILAYER INDUCTORS
A
D
C
MFW041
mass (mg)
1.6 0.15
0.8 0.15
0.8 0.15
0.3 0.20
5
11
0805
2.0 0.20
1.25 0.20
0.9 0.20
0.5 0.30
080505
2.0 0.20
1.25 0.20
1.25 0.20
0.5 0.30
15
1206
3.2 0.20
1.6 0.20
1.1 0.20
0.5 0.30
28
mass (mg)
0402
1.0 0.15
0.5 0.15
0.5 0.15
0.25 0.15
0603
1.6 0.15
0.8 0.15
0.8 0.15
0.3 0.20
0805
2.0 0.20
1.25 0.20
0.9 0.20(1)
0.5 0.30
11
(1)
Note:
1.2 0.3 for types with L 180 nH
2013 Jul 31
903
Ferroxcube
EMI-suppression products
Multilayer inductors
0805
2013 Jul 31
L (H)
L tol.
Q min.
L, Q test
f (MHz).
SRF min.
(MHz).
RDC
max.
()
I max.
(mA)
TYPE NUMBER
0.047
20%
20
50
260
0.3
50
MLI0603-47N-20
0.068
20%
20
50
250
0.3
50
MLI0603-68N-20
0.082
20%
20
50
245
0.3
50
MLI0603-82N-20
0.1
10%
30
25
240
0.3
50
MLI0603-R10-10
0.12
10%
30
25
205
0.5
50
MLI0603-R12-10
0.15
10%
30
25
180
0.6
50
MLI0603-R15-10
0.18
10%
30
25
165
0.6
50
MLI0603-R18-10
0.22
10%
30
25
150
0.8
50
MLI0603-R22-10
0.27
10%
30
25
136
0.8
50
MLI0603-R27-10
0.33
10%
30
25
125
0.85
35
MLI0603-R33-10
0.39
10%
30
25
110
35
MLI0603-R39-10
0.47
10%
30
25
105
1.35
35
MLI0603-R47-10
0.56
10%
30
25
95
1.55
35
MLI0603-R56-10
0.68
10%
25
25
85
1.7
35
MLI0603-R68-10
0.82
10%
30
25
75
2.1
35
MLI0603-R82-10
1.0
10%
35
10
65
0.6
25
MLI0603-1R0-10
1.2
10%
35
10
60
0.8
25
MLI0603-1R2-10
1.5
10%
35
10
55
0.8
25
MLI0603-1R5-10
1.8
10%
35
10
50
0.95
25
MLI0603-1R8-10
2.2
10%
35
10
50
1.15
15
MLI0603-2R2-10
2.7
10%
35
10
40
1.35
15
MLI0603-2R7-10
3.3
10%
35
10
38
1.55
15
MLI0603-3R3-10
3.9
10%
35
10
36
1.7
15
MLI0603-3R9-10
4.7
10%
35
10
33
2.1
15
MLI0603-4R7-10
5.6
10%
35
22
1.5
MLI0603-5R6-10
6.8
10%
35
20
1.7
MLI0603-6R8-10
8.2
10%
30
18
2.1
15
MLI0603-8R2-10
10
10%
20
17
2.55
15
MLI0603-100-10
0.047
20%
20
50
320
0.2
300
MLI0805-47N-20
0.068
20%
25
50
280
0.2
300
MLI0805-68N-20
0.082
20%
25
50
255
0.2
300
MLI0805-82N-20
0.1
10%
30
25
235
0.3
250
MLI0805-R10-10
0.12
10%
30
25
220
0.3
250
MLI0805-R12-10
0.15
10%
30
25
200
0.4
250
MLI0805-R15-10
0.18
10%
30
25
185
0.4
250
MLI0805-R18-10
0.22
10%
30
25
170
0.5
250
MLI0805-R22-10
0.27
10%
30
25
150
0.5
250
MLI0805-R27-10
0.33
10%
30
25
145
0.55
250
MLI0805-R33-10
0.39
10%
30
25
135
0.65
250
MLI0805-R39-10
904
Ferroxcube
EMI-suppression products
SIZE
0805
080505
1206
2013 Jul 31
L (H)
L tol.
Q min.
Multilayer inductors
L, Q test
f (MHz).
SRF min.
(MHz).
RDC
max.
()
I max.
(mA)
TYPE NUMBER
0.47
10%
30
25
125
0.65
250
MLI0805-R47-10
0.56
10%
30
25
115
0.75
150
MLI0805-R56-10
0.68
10%
30
25
105
0.8
150
MLI0805-R68-10
0.82
10%
30
25
100
150
MLI0805-R82-10
1.0
10%
45
10
75
0.45
50
MLI0805-1R0-10
1.2
10%
45
10
65
0.5
50
MLI0805-1R2-10
1.5
10%
45
10
60
0.5
50
MLI0805-1R5-10
1.8
10%
45
10
55
0.6
50
MLI0805-1R8-10
2.2
10%
45
10
50
0.65
30
MLI0805-2R2-10
2.7
10%
45
10
45
0.75
30
MLI080505-2R7-10
3.3
10%
45
10
41
0.8
30
MLI080505-3R3-10
3.9
10%
45
10
38
0.9
30
MLI080505-3R9-10
4.7
10%
45
10
35
30
MLI080505-4R7-10
5.6
10%
45
32
0.9
15
MLI080505-5R6-10
6.8
10%
45
29
15
MLI080505-6R8-10
8.2
10%
45
26
1.1
15
MLI080505-8R2-10
10
10%
45
24
1.1
15
MLI080505-100-10
12
10%
45
22
1.25
15
MLI080505-120-10
15
10%
30
19
0.8
MLI080505-150-10
18
10%
30
18
0.9
MLI080505-180-10
0.047
20%
30
50
320
0.15
300
MLI1206-47N-20
0.068
20%
25
50
280
0.25
300
MLI1206-68N-20
0.1
10%
30
25
235
0.25
250
MLI1206-R10-10
0.12
10%
30
25
220
0.3
250
MLI1206-R12-10
0.15
10%
30
25
200
0.3
250
MLI1206-R15-10
0.18
10%
30
25
185
0.4
250
MLI1206-R18-10
0.22
10%
30
25
170
0.4
250
MLI1206-R22-10
0.27
10%
25
25
150
0.5
250
MLI1206-R27-10
0.33
10%
30
25
145
0.6
250
MLI1206-R33-10
0.39
10%
30
25
135
0.5
200
MLI1206-R39-10
0.47
10%
30
25
125
0.6
200
MLI1206-R47-10
0.56
10%
30
25
115
0.7
150
MLI1206-R56-10
0.68
10%
30
25
105
0.8
150
MLI1206-R68-10
0.82
10%
30
25
100
0.9
150
MLI1206-R82-10
1.0
10%
45
10
75
0.4
100
MLI1206-1R0-10
1.2
10%
45
10
65
0.5
100
MLI1206-1R2-10
1.5
10%
45
10
60
0.5
80
MLI1206-1R5-10
1.8
10%
45
10
55
0.5
70
MLI1206-1R8-10
2.2
10%
45
10
50
0.6
60
MLI1206-2R2-10
905
Ferroxcube
EMI-suppression products
SIZE
1206
L (H)
L tol.
Q min.
Multilayer inductors
L, Q test
f (MHz).
SRF min.
(MHz).
RDC
max.
()
I max.
(mA)
TYPE NUMBER
2.7
10%
45
10
45
0.6
60
MLI1206-2R7-10
3.3
10%
45
10
41
0.7
60
MLI1206-3R3-10
3.9
10%
45
10
38
0.8
50
MLI1206-3R9-10
4.7
10%
45
10
35
0.9
50
MLI1206-4R7-10
5.6
10%
45
32
0.7
25
MLI1206-5R6-10
6.8
10%
45
29
0.8
25
MLI1206-6R8-10
8.2
10%
45
26
0.9
25
MLI1206-8R2-10
10
10%
45
24
25
MLI1206-100-10
12
10%
45
22
1.05
15
MLI1206-120-10
15
10%
35
19
0.7
MLI1206-150-10
18
10%
35
18
0.7
MLI1206-180-10
2013 Jul 31
906
Ferroxcube
EMI-suppression products
Multilayer inductors
0603
2013 Jul 31
RDC
max.
()
I max.
(mA)
TYPE NUMBER
1.0
0.3
28
6000
0.10
300
MLH0402-1N0-03
1.2
0.3
28
6000
0.10
300
MLH0402-1N2-03
1.5
0.3
10
28
6000
0.10
300
MLH0402-1N5-03
1.8
0.3
10
28
6000
0.10
300
MLH0402-1N8-03
2.2
0.3
10
29
6000
0.12
300
MLH0402-2N2-03
2.7
0.3
11
30
6000
0.12
300
MLH0402-2N7-03
3.3
0.3
11
30
5200
0.15
300
MLH0402-3N3-03
3.9
0.3
11
31
5150
0.15
300
MLH0402-3N9-03
4.7
0.3
11
31
4800
0.18
300
MLH0402-4N7-03
5.6
0.3
11
31
4100
0.20
300
MLH0402-5N6-03
6.8
5%
11
33
3800
0.25
300
MLH0402-6N8-5
8.2
5%
12
32
3500
0.25
300
MLH0402-8N2-5
10.0
5%
12
32
3300
0.30
300
MLH0402-10N-5
12.0
5%
12
31
2600
0.30
300
MLH0402-12N-5
15.0
5%
12
30
2300
0.40
300
MLH0402-15N-5
18.0
5%
12
29
2050
0.50
300
MLH0402-18N-5
22.0
5%
12
28
1900
0.60
300
MLH0402-22N-5
27.0
5%
12
27
1700
0.70
300
MLH0402-27N-5
33.0
5%
10
25
1550
1.5
200
MLH0402-33N-5
39.0
5%
10
25
1450
1.8
200
MLH0402-39N-5
47.0
5%
22
1300
2.0
200
MLH0402-47N-5
56.0
5%
10
21
1250
2.0
100
MLH0402-56N-5
1.0
0.3
12
50
6000
0.10
500
MLH0603-1N0-03
1.2
0.3
13
65
6000
0.10
500
MLH0603-1N2-03
1.5
0.3
10
13
47
6000
0.10
500
MLH0603-1N5-03
1.8
0.3
10
13
51
6000
0.10
500
MLH0603-1N8-03
2.2
0.3
13
46
6000
0.10
500
MLH0603-2N2-03
2.7
0.3
11
13
45
6000
0.10
500
MLH0603-2N7-03
3.3
0.3
11
13
51
5900
0.12
500
MLH0603-3N3-03
3.9
0.3
11
13
52
5600
0.14
500
MLH0603-3N9-03
4.7
0.3
11
13
41
4800
0.16
500
MLH0603-4N7-03
5.6
0.3
11
13
41
4350
0.18
500
MLH0603-5N6-5
6.8
5%
11
13
44
3750
0.22
500
MLH0603-6N8-5
8.2
5%
11
13
44
3300
0.24
500
MLH0603-8N2-5
10.0
5%
11
13
45
2850
0.26
400
MLH0603-10N-5
12.0
5%
13
15
46
2500
0.28
400
MLH0603-12N-5
15.0
5%
13
15
48
2150
0.32
400
MLH0603-15N-5
18.0
5%
13
15
48
2100
0.35
400
MLH0603-18N-5
22.0
5%
15
17
45
1850
0.40
400
MLH0603-22N-5
907
Ferroxcube
EMI-suppression products
SIZE
603
0805
2013 Jul 31
L (nH)
100
(MHz)
L tol.
Q min
100
(MHz)
Multilayer inductors
Q typ
100
(MHz)
Q typ
800
(MHz)
SRF
min.
(MHz)
RDC
max.
()
I max.
(mA)
TYPE NUMBER
27.0
5%
15
17
43
1680
0.45
400
MLH0603-27N-5
33.0
5%
15
18
39
1580
0.55
400
MLH0603-33N-5
39.0
5%
15
18
37(1)
1400
0.60
300
MLH0603-39N-5
47.0
5%
15
18
35(1)
1200
0.70
300
MLH0603-47N-5
MLH0603-56N-5
56.0
5%
15
18
32(1)
1100
0.75
300
68.0
5%
15
18
34(1)
1050
0.85
300
MLH0603-68N-5
82.0
5%
15
18
32(1)
900
1.0
300
MLH0603-82N-5
100
5%
15
18
20(1)
850
1.2
300
MLH0603-R10-5
120
5%
8(3)
16(3)
23(2)
680
1.6
250
MLH0603-R12-5
150
5%
8(3)
14(3)
23(2)
620
2.0
250
MLH0603-R15-5
180
5%
8(3)
14(3)
21(2)
520
2.7
250
MLH0603-R18-5
220
5%
8(3)
13(3)
20(2)
500
3.0
200
MLH0603-R22-5
1.5
0.3
11
13
40
6000
0.10
500
MLH0805-1N5-03
1.8
0.3
11
13
45
6000
0.10
500
MLH0805-1N8-03
2.2
0.3
11
13
48
6000
0.10
500
MLH0805-2N2-03
2.7
0.3
11
13
40
6000
0.10
500
MLH0805-2N7-03
3.3
0.3
13
15
56
6000
0.13
500
MLH0805-3N3-03
3.9
0.3
13
15
54
5400
0.15
500
MLH0805-3N9-03
4.7
0.3
13
15
50
4500
0.20
500
MLH0805-4N7-03
5.6
0.3
13
15
53
4000
0.23
500
MLH0805-5N6-03
6.8
5%
13
15
51
3650
0.25
500
MLH0805-6N8-5
8.2
5%
13
15
53
3000
0.28
500
MLH0805-8N2-5
10.0
5%
14
16
45
2500
0.30
500
MLH0805-10N-5
12.0
5%
14
16
48
2450
0.35
400
MLH0805-12N-5
15.0
5%
15
17
48
2000
0.40
400
MLH0805-15N-5
18.0
5%
15
17
43
1750
0.45
400
MLH0805-18N-5
22.0
5%
15
17
47
1700
0.50
400
MLH0805-22N-5
27.0
5%
16
18
38
1550
0.55
400
MLH0805-27N-5
33.0
5%
17
19
35
1350
0.60
400
MLH0805-33N-5
39.0
5%
19
21
40
1300
0.65
400
MLH0805-39N-5
47.0
5%
19
21
38
1200
0.70
400
MLH0805-47N-5
56.0
5%
16
21
31
1150
0.75
400
MLH0805-56N-5
68.0
5%
19
21
28
1000
0.80
400
MLH0805-68N-5
82.0
5%
20
22
16
850
0.90
400
MLH0805-82N-5
100
5%
18
23
730
1.0
300
MLH0805-R10-5
120(3)
5%
13(3)
22
650
1.2
300
MLH0805-R12-5
150(1)
5%
13(3)
22
550
1.4
300
MLH0805-R15-5
180(1)
5%
13(3)
23
500
1.8
300
MLH0805-R18-5
220(1)
5%
12(1)
20
450
1.8
300
MLH0805-R22-5
908
Ferroxcube
EMI-suppression products
SIZE
0805
Multilayer inductors
L (nH)
100
(MHz)
L tol.
Q min
100
(MHz)
Q typ
100
(MHz)
Q typ
800
(MHz)
SRF
min.
(MHz)
RDC
max.
()
I max.
(mA)
270(1)
5%
12(1)
20
400
2.5
200
MLH0805-R27-5
330(1)
5%
12(1)
22
380
3.0
200
MLH0805-R33-5
390(1)
5%
10(1)
17
330
3.5
200
MLH0805-R39-5
470(1)
5%
10(1)
17
300
4.0
200
MLH0805-R47-5
TYPE NUMBER
Note
1. at 500 MHz
2. at 300 MHz
3. at 50 MHz
2013 Jul 31
909
Ferroxcube
EMI-suppression products
Multilayer inductors
MOUNTING
Soldering profiles
Temp
in oC
Soldering
5 - 10 sec
Preheat
120 sec
260 oC
160 C
60 sec
25 oC
Time
in sec
80 sec
MFP131
Soldering
10 sec max.
Preheat
100 sec max.
Natural
cooling
250oC
o
150 C
60 sec min.
MFW037
2013 Jul 31
910
Ferroxcube
Multilayer inductors
EMI-suppression products
Dimensions of solderlands
MFW036
Table 1
Solder land dimensions for MLI and MLH types; see Fig.5
FOOTPRINT DIMENSIONS
(mm)
SIZE
A
0402
1.2 1.4
0.4
0.4
0603
2.4 3.4
0.8
0.6
0805
3.0 4.0
1.2
1.0
080505
3.0 4.0
1.2
1.0
1206
4.2 5.2
2.0
1.2
2013 Jul 31
911
Ferroxcube
Multilayer inductors
EMI-suppression products
BLISTER TAPE AND REEL DIMENSIONS
4 0.1
W
0.2
2 0.05
T 0.05
K 0.05
1.75 0.1
F
0.05
B 0.1
P 0.1
160 min.
Blank part Chip mounting
part
Cover tape
T 0.05
A 0.1
MFW040
K0 0.05
Fig.1
Fig.2
Blank
330 min.
Leader
Fig.3
Table 2
Dimensions of blister tape for relevant product size code; see Fig.6
PRODUCT SIZE CODE
DIMENSION
MLH0402
MLI0603
MLH0603
MLI0805
MLH0805
MLI080505
MLI1206
0.65
1.1
1.1
1.54
1.42
1.54
1.94
1.15
1.9
1.9
2.32
2.25
2.32
3.54
0.6
0.95
0.95
1.15
(1)
1.35
1.29
3.5
3.5
3.5
3.5
3.5
3.5
3.5
K0
0.6
--
0.95
0.2
0.22
0.2
0.2
Tape fig.
Note 1):
K0 = 1.04 for L < 180 nH
K0 = 1.4 for L 180 nH
MATERIAL BLISTER TAPE:
Sizes 0402 and 0603: paper
Other sizes: Polystyrene
MATERIAL COVER FILM:
Polyethylene
2013 Jul 31
912
Ferroxcube
EMI-suppression products
Multilayer inductors
D 0.5
2 0.5
1.0
21 0.8
13 0.5 B 1
C1
A2
MFW039
Dimensions in mm.
For dimensions see Table 3.
Fig.7 Reel.
Table 3
DIMENSION
MLH0402
MLI0603
MLH0603
MLI0805
MLH0805
MLI080505
MLI1206
178
178
178
178
178
178
178
60
60
60
60
60
60
60
12
10
12
10
12
10
10
1.5
1.5
1.5
Table 4
Packing quantities
PRODUCT SIZE CODE
Pcs./reel
2013 Jul 31
0402
0603
0805
080505
1206
10 000
4 000
4 000
3 000
3 000
913
Ferroxcube
Multilayer suppressors
EMI-suppression products
MULTILAYER SUPPRESSORS
Multilayer suppressors are a powerful solution for EMI/RFI
attenuation for electronic equipment. Supplied in seven
standard sizes (0402, 0603, 0805, 1206, 1210, 1806 and
1812), they have impedances between 6 and 2 000 at
100 MHz.
When installed in series with signal and/or power circuits,
high frequency noise is suppressed. There is no need for
ground termination, which makes these devices very
suitable for circuits with difficult ground. Typical
suppression frequencies range from 10 MHz to 1 000 MHz
and rated currents are between 0.1 and 6 A.
Multilayer suppressors are specially designed to reduce
noise in low impedance circuits while keeping the signal
free from distortion. This is because at the interfering
frequencies these components behave as a resistor. The
high frequency noise is converted into heat rather than
reflected to the source. This dissipation prevents ringing
and parasitic oscillations.
These characteristics can be used for many different
purposes:
Features
Monolithic structure for closed magnetic path and
highreliability
Standard EIA and EIAJ sizes:
0402, 0603, 0805, 1206, 1210, 1806 and 1812
High impedance per volume which leads to effective
high density circuits
Suitable for wave and reflow soldering
Plating material lead-free
Wide range of impedance values
Superior physical properties
Available in standard EIA and EIAJ tape-and-reel
Operating temperature -40C to +125C
100% sorting out on impedance
2013 Jul 31
914
Ferroxcube
Multilayer suppressors
EMI-suppression products
TYPE NUMBER STRUCTURE
TYPE
Product type
MLS
Size
Impedance.
TYPE
MLP
TYPE
MLN
0603
4S7
60
SIZE
IMPEDANCE
0603
120
SIZE
IMPEDANCE
0603
600
2013 Jul 31
IMPEDANCE
Size
0402: 1.0 0.5 0.5 mm
INTERNAL
CODE
Product type
SIZE
915
Ferroxcube
Multilayer Suppressors
EMI-suppression products
MULTILAYER SUPPRESSORS
A
D
C
MFW041
mass (mg)
0402
1.0 0.15
0.5 0.15
0.5 0.15
0.25 0.15
0603
1.6 0.20
0.8 0.15
0.8 0.15
0.3 0.20
0805
2.0 0.20
1.25 0.20
0.9 0.20
0.5 0.30
11
1206
3.2 0.20
1.6 0.20
1.1 0.20
0.5 0.30
28
1210
3.2 0.20
2.5 0.20
1.3 0.20
0.5 0.30
50
1806
4.5 0.25
1.6 0.20
1.6 0.20
0.5 0.30
55
1812
4.5 0.25
3.2 0.20
1.5 0.20
0.5 0.30
100
2013 Jul 31
916
Ferroxcube
EMI-suppression products
Multilayer suppressors
0603
0805
2013 Jul 31
RDC MAX.
()
I MAX.
(mA)
TYPE NUMBER
6 25%
0.05
500
MLS0402-4S4-060
10 25%
0.05
500
MLS0402-4S4-100
40 25%
0.3
300
MLS0402-4S4-400
80 25%
0.4
200
MLS0402-4S4-800
120 25%
0.5
200
MLS0402-4S4-121
240 25%
0.5
200
MLS0402-4S4-241
480 25%
0.8
100
MLS0402-4S4-481
11 25%
0.05
500
MLS0603-4S4-110
19 25%
0.08
500
MLS0603-4S4-190
30 25%
0.1
400
MLS0603-4S7-300
40 25%
0.1
400
MLS0603-4S7-400
60 25%
0.1
300
MLS0603-4S7-600
80 25%
0.15
300
MLS0603-4S7-800
100 25%
0.25
300
MLS0603-4S7-101
120 25%
0.25
300
MLS0603-4S7-121
150 25%
0.3
200
MLS0603-4S7-151
220 25%
0.3
200
MLS0603-4S7-221
300 25%
0.4
200
MLS0603-4S7-301
450 25%
0.5
200
MLS0603-4S7-451
600 25%
0.5
200
MLS0603-4S7-601
750 25%
0.7
200
MLS0603-4S7-751
1000 25%
0.7
200
MLS0603-4S7-102
1500 25%
50
MLS0603-4S4-152
7 25%
0.1
600
MLS0805-4S4-070
9 25%
0.1
600
MLS0805-4S4-090
11 25%
0.1
600
MLS0805-4S4-110
17 25%
0.1
600
MLS0805-4S4-170
30 25%
0.1
600
MLS0805-4S4-300
60 25%
0.15
500
MLS0805-4S4-600
70 25%
0.15
500
MLS0805-4S7-700
80 25%
0.15
500
MLS0805-4S7-800
120 25%
0.25
300
MLS0805-4S7-121
150 25%
0.25
300
MLS0805-4S7-151
220 25%
0.3
300
MLS0805-4S7-221
300 25%
0.3
300
MLS0805-4S7-301
400 25%
0.3
300
MLS0805-4S7-401
500 25%
0.4
300
MLS0805-4S7-501
600 25%
0.4
300
MLS0805-4S7-601
750 25%
0.5
200
MLS0805-4S4-751
917
Ferroxcube
EMI-suppression products
SIZE
0805
1206
1210
1806
1812
Multilayer suppressors
RDC MAX.
()
I MAX.
(mA)
1000 25%
0.5
200
MLS0805-4S7-102
1500(1) 25%
0.6
200
MLS0805-4S7-152
TYPE NUMBER
2000 25%
0.8
100
MLS0805-4S4-202
19 25%
0.05
600
MLS1206-4S4-190
26 25%
0.05
600
MLS1206-4S4-260
30 25%
0.05
600
MLS1206-4S4-300
50 25%
0.1
500
MLS1206-4S4-500
60 25%
0.1
500
MLS1206-4S4-600
70 25%
0.1
500
MLS1206-4S4-700
90 25%
0.15
500
MLS1206-4S4-900
120 25%
0.15
500
MLS1206-4S4-121
150 25%
0.15
500
MLS1206-4S4-151
200 25%
0.2
400
MLS1206-4S4-201
400 25%
0.2
400
MLS1206-4S4-401
500 25%
0.2
400
MLS1206-4S4-501
600 25%
0.3
400
MLS1206-4S4-601
1000(1) 25%
0.4
200
MLS1206-4S7-102
1200(1) 25%
0.4
200
MLS1206-4S7-122
2000(2) 25%
0.6
200
MLS1206-4S7-202
32 25%
0.2
500
MLS1210-4S4-320
60 25%
0.2
500
MLS1210-4S4-600
90 25%
0.2
500
MLS1210-4S4-900
50 25%
0.2
600
MLS1806-4S4-500
60 25%
0.2
600
MLS1806-4S4-600
80 25%
0.2
600
MLS1806-4S4-800
100 25%
0.3
500
MLS1806-4S4-101
150 25%
0.3
500
MLS1806-4S4-151
170 25%
0.3
500
MLS1806-4S4-171
70 25%
0.3
500
MLS1812-4S4-700
120 25%
0.3
500
MLS1812-4S4-121
Note
1. at 50 MHz
2. at 30 MHz
2013 Jul 31
918
Ferroxcube
EMI-suppression products
Multilayer suppressors
0805
1206
1210
1806
1812
2013 Jul 31
RDC MAX.
()
I MAX.
(mA)
TYPE NUMBER
11 25%
0.02
4000
25 25%
0.03
3000
MLP0603-250
40 25%
0.035
3000
MLP0603-400
MLP0603-110
60 25%
0.04
3000
MLP0603-600
120 25%
0.07
1800
MLP0603-121
300 25%
0.14
1500
MLP0603-301
500 25%
0.18
1500
MLP0603-501
600 25%
0.2
1000
MLP0603-601
1000 25%
0.25
800
MLP0603-102
11 25%
0.01
6000
MLP0805-110
17 25%
0.02
5000
MLP0805-170
30 25%
0.02
4000
MLP0805-300
60 25%
0.03
3000
MLP0805-600
80 25%
0.04
3000
MLP0805-800
120 25%
0.04
3000
MLP0805-121
200 25%
0.05
2500
MLP0805-201
300 25%
0.08
2000
MLP0805-301
600 25%
0.1
2000
MLP0805-601
1000 25%
0.12
1500
MLP0805-102
19 25%
0.015
7000
MLP1206-190
32 25%
0.015
4000
MLP1206-320
50 25%
0.02
4000
MLP1206-500
70 25%
0.025
3000
MLP1206-700
80 25%
0.025
3000
MLP1206-800
100 25%
0.03
2500
MLP1206-101
300 25%
0.06
2000
MLP1206-301
600 25%
0.1
1800
MLP1206-601
0.15
1200
MLP1206-102
0.18
1000
MLP1206-122
0.2
800
MLP1206-152
60 25%
0.025
4000
MLP1210-600
90 25%
0.025
3000
MLP1210-900
50 25%
0.02
6000
MLP1806-500
60 25%
0.02
5000
MLP1806-600
80 25%
0.025
4000
MLP1806-800
150 25%
0.1
2000
MLP1806-151
70 25%
0.03
6000
MLP1812-700
120 25%
0.03
4000
MLP1812-121
919
Ferroxcube
EMI-suppression products
Multilayer suppressors
0805
1206
2013 Jul 31
RDC MAX.
()
I MAX.
(mA)
TYPE NUMBER
6 25%
0.05
500
MLN0603-060
10 25%
0.07
400
MLN0603-100
40 25%
0.30
300
MLN0603-400
80 25%
0.50
300
MLN0603-800
120 25%
0.40
300
MLN0603-121
240 25%
0.60
200
MLN0603-241
300 25%
0.60
200
MLN0603-301
480 25%
0.70
150
MLN0603-481
600 25%
0.60
100
MLN0603-601
6 25%
0.07
800
MLN0805-060
11 25%
0.10
700
MLN0805-110
26 25%
0.20
600
MLN0805-260
32 25%
0.20
600
MLN0805-320
60 25%
0.30
500
MLN0805-600
75 25%
0.30
500
MLN0805-750
90 25%
0.30
500
MLN0805-900
120 25%
0.40
400
MLN0805-121
150 25%
0.40
400
MLN0805-151
170 25%
0.50
400
MLN0805-171
220 25%
0.50
300
MLN0805-221
300 25%
0.50
300
MLN0805-301
400 25%
0.60
300
MLN0805-401
500 25%
0.70
200
MLN0805-501
600 25%
0.50
200
MLN0805-601
1000 25%
1.0
100
MLN0805-102
1200 25%
0.70
100
MLN0805-122
1500 25%
0.70
100
MLN0805-152
32 25%
0.20
600
MLN1206-320
60 25%
0.30
500
MLN1206-600
80 25%
0.30
500
MLN1206-800
90 25%
0.30
500
MLN1206-900
120 25%
0.40
400
MLN1206-121
150 25%
0.40
400
MLN1206-151
200 25%
0.50
300
MLN1206-201
220 25%
0.30
300
MLN1206-221
350 25%
0.30
300
MLN1206-351
400 25%
0.60
300
MLN1206-401
600 25%
0.80
300
MLN1206-601
1200 25%
1.00
200
MLN1206-122
920
Ferroxcube
Multilayer Suppressors
EMI-suppression products
MOUNTING
Soldering profiles
Temp
in oC
Soldering
5 - 10 sec
Preheat
120 sec
260 oC
160 C
60 sec
Time
in sec
25 C
80 sec
MFP131
Soldering
10 sec max.
Preheat
100 sec max.
Natural
cooling
250oC
o
150 C
60 sec min.
MFW037
2013 Jul 31
921
Ferroxcube
Multilayer Suppressors
EMI-suppression products
Dimensions of solderlands
MFW036
Table 1
Solder land dimensions for MLS, MLP and MLN types; see Fig.3
FOOTPRINT DIMENSIONS
(mm)
SIZE
A
0402
1.2 1.4
0.4
0.4
0603
2.4 3.4
0.8
0.6
0805
3.0 4.0
1.2
1.0
1206
4.2 5.2
2.0
1.2
1210
5.5 6.5
2.0
1.8
1806
5.5 6.5
3.0
1.2
1812
5.5 6.5
3.0
2.4
2013 Jul 31
922
Ferroxcube
Multilayer Suppressors
EMI-suppression products
BLISTER TAPE AND REEL DIMENSIONS
4 0.1
W
0.2
2 0.05
T 0.05
K 0.05
1.75 0.1
F
0.05
B 0.1
160 min.
Blank part Chip mounting
part
Blank
330 min.
Leader
Cover tape
P 0.1
T 0.05
A 0.1
MFW061
Fig.1
Fig.2
Table 2
Dimensions of blister tape for relevant product size code; see Fig.4
PRODUCT SIZE CODE
DIMENSION
0402
0603
0805
1206
1210
1806
1812
0.65
0.975
1.54
1.94
2.80
1.94
3.64
1.15
1.8
2.32
3.54
3.42
4.94
4.94
0.7
1.05
1.15
1.29
1.64
1.90
1.80
8.0
8.0
8.0
8.0
8.0
12
12
2.0
4.0
4.0
4.0
4.0
4.0
8.0
3.5
3.5
3.5
3.5
3.5
5.5
5.5
0.2
0.2
0.2
0.3
0.3
Tape fig.
2013 Jul 31
923
Ferroxcube
EMI-suppression products
D 0.5
2 0.5
1.0
21 0.8
13 0.5 B 1
C1
A2
MFW039
Dimensions in mm.
For dimensions see Table 3.
Fig.5 Reel.
Table 3
DIMENSION
0402
0603
0805
1206
1210
1806
1812
178
178
178
178
178
178
178
60
60
60
60
60
60
60
10
10
10
10
10
14
14
Table 4
Packing quantities
PRODUCT SIZE CODE
Pcs./reel
2013 Jul 31
0402
0603
0805
1206
1210
1806
1812
10 000
4 000
4 000
3 000
2 500
2 000
1 000
924
Ferroxcube
EMI-suppression products
Rods
RODS
L
handbook, halfpage
MGC244
Fig.1 Rod.
Table 1
TYPE NUMBER
1.6 +0.05
9 0.2
ROD1.6/9-3B1-D
3B1
3S3
ROD1.6/9-4B1-D
4B1
2 0.05
20 0.9
ROD2/20-3B1-D
ROD2/20-4B1-D
3 0.05
15 0.8
ROD3/15-3B1-D
ROD3/15-4B1-D
3 0.3
20 0.4
ROD3/20-3S3
3 0.05
20 0.9
ROD3/20-3B1-D
ROD3/20-4B1-D
3 0.05
25 1.0
ROD3/25-3B1-D
ROD3/25-4B1-D
3.3 0.10
17 0.3
ROD3.3/17-3S3
4 0.05
15 0.8
ROD4/15-3B1-D
ROD4/15-4B1-D
4 0.05
20 0.9
ROD4/20-3B1-D
ROD4/20-4B1-D
4 0.05
25 1.0
ROD4/25-3B1-D
ROD4/25-4B1-D
5 0.30
20 0.5
ROD5/20-3S3
ROD5/20-4B1
5 0.05
20 0.9
ROD5/20-3B1-D
ROD5/20-4B1-D
5 0.30
25 1.0
ROD5/25-3S3
5 0.05
25 1.0
ROD5/25-3B1-D
ROD5/25-4B1-D
5 0.05
30 1.2
ROD5/30-3B1-D
ROD5/30-4B1-D
5.25 0.3
18 0.3
ROD5.3/18-3S3
6 0.30
25 0.6
ROD6/25-3S3
6 0.30
30 0.9
ROD6/30-3S3
6 0.10
30 1.2
ROD6/30-3B1-D
ROD6/30-4B1-D
6 0.10
40 1.6
ROD6/40-3B1-D
ROD6/40-4B1-D
6 0.10
50 1.0
ROD6/50-3B1-D
ROD6/50-4B1-D
6.5 0.30
25 0.6
ROD6.5/25-3S3
ROD6.5/25-4B1
8 0.5
25 0.75
ROD8/25-3S3
8 0.5
32 2
ROD8/32-3S3
ROD8/32-4B1
8 0.40
50 1.0
ROD8/50-3B1
ROD8/50-4B1
8 0.40
150 3
ROD8/150-3B1
ROD8/150-4B1
8 0.40
200 4
ROD8/200-3B1
ROD8/200-4B1
10 0.50
200 4
ROD10/200-3B1
ROD10/200-4B1
2013 Jul 31
925
Ferroxcube
EMI-suppression products
SMD BEADS FOR EMI SUPPRESSION
SMD beads
Mechanical data
General data
ITEM
5.3 0.35
1.2
min
1.1
min
SPECIFICATION
Taping
method
GRADE
at f
(MHz)
1.27
0.07
1.8
max
MBE731
0.2 0.015
3.05
0.15
Dimensions in mm.
TYPE NUMBER
4S2
28
10
33
25
25
100
25
25
38
100
45
300
4.6 0.3
1.2
min
1.1
min
BDS 3/1.8/5.3-3S1
BDS 3/1.8/5.3-4S2
4S2
25
45
10
35
25
30
25
50
100
55
300
MGC296
0.2 0.015
Dimensions in mm.
BDS3/3/4.6-3S1
BDS3/3/4.6-4S2
4S2
55
80
10
55
25
65
25
100
100
110
300
5 min
1.2
min
25
100
100
110
300
1.27
0.07
3
max
BDS 3/3/8.9-3S1
MGC297
0.2 0.015
Dimensions in mm.
BDS 3/3/8.9-4S2
(3)
65
3.05
0.15
8.9 0.35
1.27
0.07
3
max
3.05
0.15
4.6
0.3
8.9 0.35
BDS 4.6/3/8.9-4S2
5 min
1.2
min
1.27
0.07
3
max
Note
0.2 0.015
Dimensions in mm.
3. DC resistance <1.0 m
2013 Jul 31
926
MGC298
Ferroxcube
EMI-suppression products
SMD beads
Reflow soldering
DIMENSIONS (mm)
SIZE
A
BDS 3/1.8/5.3
2.8
7.2
2.2
3.3
BDS 3/3/4.6
2.8
6.4
1.8
3.3
BDS 3/3/8.9
7.0
10.8
1.9
3.3
BDS 4.6/3/8.9
7.0
10.8
1.9
3.3
; ;
B
MEA734
Table 2
Wave soldering
DIMENSIONS (mm)
SIZE
A
BDS 3/1.8/5.3
2.0
7.2
2.6
3.0
0.8
BDS 3/3/4.6
2.0
6.4
2.2
3.0
0.8
BDS 3/3/8.9
6.0
12.2
3.1
3.0
2.5
BDS 4.6/3/8.9
6.0
12.2
3.1
3.0
2.5
;;;
B
MEA735
2013 Jul 31
927
Ferroxcube
EMI-suppression products
SMD beads
Soldering profiles
Temp
in oC
Soldering
20 - 40 sec
Preheat
480 sec max
255 - 260 oC
217 oC
6 oC/s
max
3 C/s
max
max 200 oC
60 - 150 sec
o
min 150 C
60 - 180 sec
Time
in sec
25 C
MFP129
300
10 s
MLA861
(C)
250
235 C to 260 C
200
second wave
5 K/s
first wave
2 K/s
200 K/s
150
100 C to 130 C
forced
cooling
100
2 K/s
50
0
0
50
100
150
2013 Jul 31
928
200
t (s)
250
Ferroxcube
EMI-suppression products
SMD beads
K0
handbook, full pagewidth
P0
D0
P2
E
F
cover tape
B0
A0
MEA613 - 1
D1
P1
direction of unreeling
Table 3
DIMENSIONS (mm)
SIZE
BDS3/1.8/5.3
BDS3/3/4.6
BDS3/3/8.9
BDS4.6/3/8.9
A0
3.25 0.1
3.45 0.1
3.45 0.1
5.1 0.1
B0
5.85 0.1
5.1 0.1
9.4 0.1
9.4 0.1
K0
2.0 0.1
3.1 0.1
3.1 0.1
3.1 0.1
0.3 0.05
0.25 10%
0.35 0.05
0.3 0.05
12.0 0.3
12.0 0.3
16.0 0.3
16.0 0.3
1.75 0.1
1.75 0.1
1.75 0.1
1.75 0.1
5.5 0.05
5.5 0.05
7.5 0.1
7.5 0.1
D0
1.5 +0.1
1.5 +0.1
1.5 +0.1
1.5 +0.1
D1
1.5
1.5
1.5
1.5
P0
4.0 0.1
4.0 0.1
4.0 0.1
4.0 0.1
P1
8.0 0.1
8.0 0.1
8.0 0.1
8.0 0.1
P2
2.0 0.1
2.0 0.05
2.0 0.1
2.0 0.1
2013 Jul 31
929
Ferroxcube
EMI-suppression products
SMD beads
W2
20.5
12.75
0.15
N
0
MSA284
W1
Dimensions in mm.
For dimensions see Table 4.
Fig.10 Reel.
Table 4
SIZE
A
W1
W2
12
330
100 5
12.4
16.4
16
330
100 5
16.4
20.4
2013 Jul 31
930
Ferroxcube
EMI-suppression products
GRADE
General data
SPECIFICATION
Taping
method
|Ztyp|(1) at f
()
(MHz)
TYPE NUMBER
21
25
35
100
50
300
CMS2-5.6/3/4.8-4S2
38
25
60
100
12
25
23
100
42
300
4S2
outer
channel
15
25
30
100
50
300
CMS4-11/3/4.8-4S2
4S2
inner
channel
23
25
45
100
82
300
4S2
outer
channel
27
25
58
100
97
300
CMS4-11/3/8.9-4S2
Note
4S2
inner
channel
TYPE NUMBER
ITEM
Solderability
|Ztyp|(1) at f
()
(MHz)
CMS2-5.6/3/8.9-4S2
Mechanical data
8.9 0.5
>5
4.75 0.3
>1.2
handbook, halfpage
>1.1
>1.2
1.27
0.07
handbook, halfpage
3.04
max.
3.04
max.
CBW180
0.2
0.2
Dimensions in mm.
2013 Jul 31
1.33
0.2
931
5.6 0.2
Ferroxcube
EMI-suppression products
4.75 0.3
8.9 0.5
>5
>1.1
>1.2
1.27
0.07
1.33
0.2
>1.2
handbook,
halfpage
handbook,
full pagewidth
3.04
max.
3.04
max.
10.8 0.3
0.2
0.2
CBW181
Dimensions in mm.
handbook, halfpage
;;
;;
;;
;;
6.4
1.8
2.5
2.8
;;
;;
;;
;;
6.4
handbook, halfpage
;;;;;;;
;;;;;;;
;;;;;;;
;;;;;;;
1.8
2.0
0.8
1.9
1.9
2.5
MBG063
MBG064
Dimensions in mm.
Dimensions of solder lands are based on a solder paste layer
thickness of approximately 200 m (0.7 mg solder paste per mm2 ).
Fig.3
2013 Jul 31
Dimensions in mm.
Fig.4
932
Ferroxcube
EMI-suppression products
;
;
;
1.8
handbook, halfpage
2.5
10.8
7.0
;;
;;
;;
10.8
;;;;;
;;;;;
;;;;;
1.8
6.0
2.5
1.9
handbook, halfpage
2.5
CBW291
1.9
CBW292
Dimensions in mm.
Dimensions of solder lands are based on a solder paste layer
thickness of approximately 200 m (0.7 mg solder paste per mm2 ).
Fig.5
Dimensions in mm.
handbook, halfpage
6.4
;;
;;
;;
;;
;;
;;
;;
1.8
2.5
2.8
Fig.6
handbook, halfpage
;;
;;
;;
;;
;;
;;
;;
2013 Jul 31
6.4
;;;;;;;
;;;;;;;
;;;;;;;
;;;;;;;
;;;;;;;
;;;;;;;
;;;;;;;
1.8
2.0
0.8
1.9
1.9
2.5
MBG065
MBG066
Dimensions in mm.
Dimensions of solder lands are based on a solder paste layer
thickness of approximately 200 m (0.7 mg solder paste per mm2 ).
Fig.7
Dimensions in mm.
Fig.8
933
Ferroxcube
EMI-suppression products
;
;
;
;
;
1.8
handbook, halfpage
2.5
10.8
7.0
10.8
;;
;;
;;
;;
;;
;;;;;
;;;;;
;;;;;
;;;;;
;;;;;
1.8
6.0
2.5
handbook, halfpage
1.9
2.5
1.9
CBW290
CBW289
Dimensions in mm.
Dimensions of solder lands are based on a solder paste layer
thickness of approximately 200 m (0.7 mg solder paste per mm2 ).
Fig.9
2013 Jul 31
Dimensions in mm.
934
Ferroxcube
EMI-suppression products
Soldering profiles
Temp
in oC
Soldering
20 - 40 sec
Preheat
480 sec max
255 - 260 oC
217 oC
6 oC/s
max
3 C/s
max
max 200 oC
60 - 150 sec
o
min 150 C
60 - 180 sec
Time
in sec
25 C
MFP129
300
10 s
MLA861
(C)
250
235 C to 260 C
200
second wave
5 K/s
first wave
2 K/s
200 K/s
150
100 C to 130 C
forced
cooling
100
2 K/s
50
0
0
50
100
150
2013 Jul 31
935
200
t (s)
250
Ferroxcube
EMI-suppression products
K0
handbook, full pagewidth
P0
D0
P2
E
F
cover tape
B0
A0
MEA613 - 1
D1
P1
direction of unreeling
Table 1
DIMENSIONS (mm)
SIZE
CMS2-5.6/3/4.8
CMS2-5.6/3/8.9
CMS2-5.6/3/8.9
CMS4-11/3/8.9
A0
5.26
5.99
5.23
10.13
B0
6.07
9.09
11.18
11.56
K0
3.18
3.18
4.5
4.5
0.3
0.33
0.34
0.36
12
16
24
24
1.75
1.75
1.75
1.75
11.5
5.5
7.5
11.75
D0
1.5
1.5
1.5
1.5
D1
1.5
1.5
1.5
1.5
P0
4.0
4.0
4.0
4.0
P1
8.0
8.0
8.0
16.0
P2
2.0
2.0
2.0
2.0
2013 Jul 31
936
Ferroxcube
EMI-suppression products
W2
20.5
12.75
0.15
N
0
MSA284
W1
Dimensions in mm.
For dimensions see Table 2.
Fig.14 Reel.
Table 2
SIZE
A
W1
W2
12
330
100 5
12.4
16.4
16
330
100 5
16.4
20.4
24
330
100 5
24.4
28.4
2013 Jul 31
937
Ferroxcube
EMI-suppression products
GRADE
SPECIFICATION
IEC 60068-2-58, Part 2, Test Ta,
method 1
Mass
0.9 g
Taping
method
at f
(MHz)
3S4
|Ztyp|(1)
()
4B1
230
10
400
50
430
100
275
25
500
100
350
300
TYPE NUMBER
WBS1.5-5/4.8/10-3S4
WBS1.5-5/4.8/10-4B1
Note
1. Typical values, Zmin is 20%.
11
8.5 0.25
2
5 0.25
4.6 0.2
Dimensions in mm.
CBW288
Fig.1 WBS1.5-5/4.8/10.
14.5
;;;;; ;;;;;
;;;;; ;;;;;
6
2.5
MBG062
Dimensions of solder lands are based on a solder paste layer thickness of approximately 200 m (0.7 mg solder paste per mm2).
2013 Jul 31
938
Ferroxcube
EMI-suppression products
SPECIFICATION
GRADE
0.9 g
IEC 60286-3 and EIA 481-2
at f
(MHz)
3S4
Taping
method
|Ztyp|(1)
()
4B1
300
10
625
50
600
100
485
25
850
100
350
300
TYPE NUMBER
WBS2.5-5/4.8/10-3S4
WBS2.5-5/4.8/10-4B1
Note
1. Typical values, Zmin is 20%.
11
8.5 0.25
2
5 0.25
4.6 0.2
CBW182
Dimensions in mm.
Fig.3 WBS2.5-5/4.8/10.
14.5
;;;;; ;;;;;
;;;;; ;;;;;
6
2.5
MBG062
Dimensions of solder lands are based on a solder paste layer thickness of approximately 200 m (0.7 mg solder paste per mm2).
2013 Jul 31
939
Ferroxcube
EMI-suppression products
Soldering profiles
Temp
in oC
Soldering
20 - 40 sec
Preheat
480 sec max
255 - 260 oC
217 oC
6 oC/s
max
3 C/s
max
max 200 oC
60 - 150 sec
o
min 150 C
60 - 180 sec
Time
in sec
25 C
MFP129
300
10 s
MLA861
(C)
250
235 C to 260 C
200
second wave
5 K/s
first wave
2 K/s
200 K/s
150
100 C to 130 C
forced
cooling
100
2 K/s
50
0
0
50
100
150
2013 Jul 31
940
200
t (s)
250
Ferroxcube
EMI-suppression products
K0
handbook, full pagewidth
P0
D0
P2
E
F
cover tape
B0
A0
MEA613 - 1
D1
P1
direction of unreeling
Table 1
DIMENSIONS (mm)
SIZE
WBS1.5-5/4.8/10
WBS2.5-5/4.8/10
A0
5.51
5.51
B0
11
11
K0
5.03
5.03
0.36
0.36
24
24
1.75
1.75
11.5
11.5
D0
1.5
1.5
D1
1.5
1.5
P0
4.0
4.0
P1
8.0
8.0
P2
2.0
2.0
2013 Jul 31
941
Ferroxcube
EMI-suppression products
W2
20.5
12.75
0.15
N
0
MSA284
W1
Dimensions in mm.
For dimensions see Table 2.
Fig.8 Reel.
Table 2
SIZE
24
2013 Jul 31
W1
W2
330
100 5
24.4
28.4
942
Ferroxcube
EMI-suppression products
SPECIFICATION
GRADE
4B1
Metallization
copper-tin (CuSn)
Solderability
Mass
0.9 g
Taping
method
|Ztyp|(1)
()
at f
(MHz)
485
25
850
100
350
300
TYPE NUMBER
WBSM2.5-5/4.8/10-4B1
Note
1. Typical values, Zmin is 20%.
11
8.5 0.25
2
2.5
5 0.25
4.6 0.2
MFP068
Dimensions in mm.
Fig.1 WBSM2.5-5/4.8/10.
14.5
;;;;; ;;;;;
;;;;; ;;;;;
6
2.5
MBG062
Dimensions of solder lands are based on a solder paste layer thickness of approximately 200 m (0.7 mg solder paste per mm2).
2013 Jul 31
943
Ferroxcube
EMI-suppression products
Soldering profiles
Temp
in oC
Soldering
20 - 40 sec
Preheat
480 sec max
255 - 260 oC
217 oC
6 oC/s
max
3 C/s
max
max 200 oC
60 - 150 sec
o
min 150 C
60 - 180 sec
Time
in sec
25 C
MFP129
300
10 s
MLA861
(C)
250
235 C to 260 C
200
second wave
5 K/s
first wave
2 K/s
200 K/s
150
100 C to 130 C
forced
cooling
100
2 K/s
50
0
0
50
100
150
2013 Jul 31
944
200
t (s)
250
Ferroxcube
EMI-suppression products
BLISTER TAPE AND REEL DIMENSIONS
K0
handbook, full pagewidth
P0
D0
P2
E
F
cover tape
B0
A0
D1
P1
direction of unreeling
Table 1
DIMENSIONS (mm)
SIZE
WBSM2.5-5/4.8/10
A0
5.51
B0
11
K0
5.03
0.36
24
1.75
11.5
D0
1.5
D1
1.5
P0
4.0
P1
8.0
P2
2.0
2013 Jul 31
945
MEA613 - 1
Ferroxcube
EMI-suppression products
W2
20.5
12.75
0.15
N
0
MSA284
W1
Dimensions in mm.
For dimensions see Table 2.
Fig.6 Reel.
Table 2
SIZE
24
2013 Jul 31
W1
W2
330
100 5
24.4
28.4
946
Ferroxcube
EMI-suppression products
Tubes
TUBES
;;;;;;
L
handbook, halfpage
D
d
MGC245
Fig.1 Tube.
Table 1
DIMENSIONS
(mm)
D
TYPE NUMBER
4B1
3B1
3C90
3.1 0.02
1.3 + 0.2
18.8 0.5
TUB3.1/1.3/19-3B1-DL
3.5 0.25
1.2 + 0.15
5 0.3
TUB3.5/1.2/5-4B1
TUB3.5/1.2/5-3B1
3.5 +0.1/0.2
1.3 + 0.2
3 + 0.5
TUB3.5/1.3/3-3B1
3.5 0.2
1.3 + 0.2
7.5 +0.5
TUB3.5/1.3/7.5-3B1
3.7 0.4
1.2 + 0.2
3.5 0.5
TUB3.7/1.2/3.5-4B1
TUB3.7/1.2/3.5-3B1
3.8 0.1
2.8 0.1
8 0.25
TUB3.8/2.8/8-4B1
4 0.25
1.6 + 0.15
15 0.8
TUB4/1.6/15-4B1
TUB4/1.6/15-3B1
4 0.25
1.6 + 0.15
40 1.6
TUB4/1.6/40-4B1
TUB4/1.6/40-3B1
TUB4/1.6/40-3C90
TUB4/2/5-3B1
4 0.2
2 0.2
4 0.1
3 + 0.2
5 0.5
4.1 + 0.2
2 + 0.2
7 0.2
TUB4.1/2/7-4B1
4.1 + 0.1
2 + 0.2
7 0.2
TUB4.1/2/7-3B1-D
4.1 + 0.1
2 + 0.2
11 0.2
TUB4.1/2/11-3B1-D
4.1 + 0.2
2 + 0.2
25.5 1
TUB4.1/2/26-4B1
4.15 0.05
2 + 0.2
12.2 0.4
TUB4.2/2/12-4B1-DL
TUB4.2/2/12-3B1-DL
4.3 0.2
2 + 0.2
15.4 0.8
TUB4.3/2/15-4B1
TUB4.3/2/15-3B1
4.3 0.2
2 + 0.2
25.5 1
TUB4.3/2/26-3B1
5 0.3
2 + 0.2
50 1
TUB5/2/50-3C90
5.3 0.2
3 + 0.2
22.4 0.8
TUB5.3/3/22-3B1
6 0.3
3 + 0.2
20 0.9
TUB6/3/20-4B1
TUB6/3/20-3B1
TUB6/3/20-3C90
6 0.3
3 + 0.2
30 1.2
TUB6/3/30-4B1
TUB6/3/30-3C90
8 0.4
4 + 0.3
20 0.9
TUB8/4/20-4B1
TUB8/4/20-3B1
8 0.4
4 + 0.3
40 1.6
TUB8/4/40-3B1
TUB8/4/40-3C90
8 0.4
4.2 + 0.6
51.4 2.8
TUB8/4.2/51-4B1
TUB8/4.2/51-3B1
9.5 0.3
6.5 0.2
TUB9.5/6.5/17-3B1
10 0.5
4.2 + 0.3
20 0.9
TUB10/4.2/20-3B1
TUB10/4.2/20-3C90
10 0.5
6.5 + 0.4
20 0.9
TUB10/6.5/20-4B1
TUB10/6.5/20-3C90
2013 Jul 31
17 +0.5/0.4
947
Ferroxcube
EMI-suppression products
Wideband chokes
Grades, parameters and type numbers; see Fig.1
GRADE
SPECIFICATION
3S4
4B1
4S2
|Ztyp| at f
No. OF
TURNS
1.5
1.5
1.5
()
(MHz)
300
350
213(1)
400(1)
470(1)
120
250
10
50
100
TYPE NUMBER
WBC1.5/A-3S4
WBC1.5/A-4B1
WBC1.5/A-4S2
Note
1. Minimum guaranteed impedance is Ztyp 20%.
2. Also available with insulated
handbook, 4 columns
40 5
40 5
10
0.6
14
Dimensions in mm.
CBW211
Fig.1 WBC1.5/A.
Grades, parameters and type numbers; see Fig.2
SPECIFICATION
GRADE
|Ztyp| at f
No. OF
TURNS
3S4
4B1
4S2
2 1.5
2 1.5
2 1.5
4A15
2 1.5
()
(MHz)
700 (1)
800 (1)
213(2)
400(2)
470(2)
1000
1000
50
110
10
50
100
50
180
TYPE NUMBER
WBC1.5/1.5/A-3S4
WBC1.5/1.5/A-4B1
WBC1.5/1.5/A-4S2
WBC1.5/1.5/A-4A15
Notes
1. Z measured with both windings connected in series.
2. Minimum guaranteed impedance is Ztyp 20%; measured
with one winding.
handbook, 4 columns
40 5
10
40 5
0.6
14
CBW212
Dimensions in mm.
Fig.2 WBC1.5/1.5/A.
2013 Jul 31
948
Ferroxcube
EMI-suppression products
Wideband chokes
Grades, parameters and type numbers; see Fig.3
SPECIFICATION
GRADE
|Ztyp| (1) at f
No. OF
TURNS
4S2
4A15
()
(MHz)
300
650
600
730
750
10
50
100
50
180
TYPE NUMBER
WBC2/R-4S2
WBC2/R-4A15
Note
1. Minimum guaranteed impedance is Ztyp 20%.
40 5
10
6
0.6
14
CBW377
Dimensions in mm.
Fig.3 WBC2/R.
Grades, parameters and type numbers; see Fig.4
SPECIFICATION
GRADE
|Ztyp| at f
No. OF
TURNS
3S4
4B1
4S2
2.5
2.5
2.5
4A15
2.5
()
(MHz)
600
700
400(1)
850(1)
725(1)
800
820
50
180
10
50
100
50
180
TYPE NUMBER
WBC2.5/A-3S4(2)
WBC2.5/A-4B1(2)
WBC2.5/A-4S2
WBC2.5/A-4A15
Note
1. Minimum guaranteed impedance is Ztyp 20%.
2. Also available with insulated wires, sleeves, encapsulated and
taped and reeled.
handbook, 4 columns
O 0.6
40 5
10
40 5
14
MGC279
Dimensions in mm.
Fig.4 WBC2.5/A.
2013 Jul 31
949
Ferroxcube
EMI-suppression products
Wideband chokes
Grades, parameters and type numbers; see Fig.5
SPECIFICATION
GRADE
3S4
4B1
4S2
|Ztyp| at f
No. OF
TURNS
2.5
2.5
2.5
()
(MHz)
600
700
400
850
725
50
75
10
50
100
TYPE NUMBER
WBC2.5/R-3S4(1)
WBC2.5/R-4B1(2)
WBC2.5/R-4S2
Note
1. Also available with insulated wires, sleeves and moulded.
2. Also available with insulated wires, sleeves.
10
2
4 0
12.5 1
O 0.6
13.5
2.5
MGC282
Dimensions in mm.
Fig.5 WBC2.5/R.
Grades, parameters and type numbers; see Fig.6
SPECIFICATION
GRADE No. OF
note 1 TURNS
Solderability
;
;;
;;;
3S4
4B1
2.5
2.5
|Ztyp| at f
()
(MHz)
600
700
50
75
2.5
O 0.6
12.5 1
2.5 1
Fig.6 WBC2.5/SP.
2013 Jul 31
WBC2.5/SP-3S4
WBC2.5/SP-4B1
Note
1. Colour code 3S4 = blue, 4B1 = green.
handbook, 4 columns
Dimensions in mm.
TYPE NUMBER
950
2
0
MGC284
Ferroxcube
EMI-suppression products
Wideband chokes
Grades, parameters and type numbers; see Fig.7
SPECIFICATION
GRADE
No. OF
TURNS
3S4
4B1
4S2
3
3
3
4A15
|Ztyp| at f
()
(MHz)
650
800
500(1)
1000(1)
688(1)
1000
1000
63
110
10
50
100
50
180
TYPE NUMBER
WBC3/R-3S4(2)
WBC3/R-4B1(2)
WBC3/R-4S2
WBC3/R-4A15
Note
1. Minimum guaranteed impedance is Ztyp 20%.
2. Also available with encapsulation and/or taped and reeled.
handbook, 4 columns
10
20
3.5
MGC287
14
Dimensions in mm.
Fig.7 WBC3/R.
2013 Jul 31
O 0.6
951
Ferroxcube
Soft Ferrites
MFP061
2013 Jul 31
952
Ferroxcube
Soft Ferrites
Ve
(mm 3)
Ae
(mm2)
TN10/6/4
188
7.8
TN13/7.5/5
368
12.2
1.8
TN17/11/6.4
787
18.7
3.7
TN20/10/6.4
1330
30.5
6.9
TN23/14/7.5
1845
33.1
TN26/15/11
3700
61.5
2013 Jul 31
MASS
(g)
core type
special version
AL value (nH)
0.95
gapped
coating type
- N - polyamide 11 (nylon)
core material
MFP062
9.0
19
core size D / H
(uncoated core
dimensions)
953
Ferroxcube
TN10/6/4
10.6 0.3
PARAMETER
VALUE
UNIT
(I/A)
3.07
mm1
Ve
effective volume
188
mm3
Ie
effective length
24.1
mm
Ae
effective area
7.8
mm2
mass of core
0.95
5.2 0.3
Coating
(0.3)
coating PA11
4.4
0.3
MFP132
Dimensions in mm.
Isolation voltage
GRADE
3C20
AL(1)
(nH)
TYPE NUMBER
48 15%
90
TN10/4-3C20-A48
66 15%
125
TN10/4-3C20-A66
78 15%
147
TN10/4-3C20-A78
84 15%
160
TN10/4-3C20-A84
92 15%
1 73
TN10/4-3C20-A92
Note
1. Winding equally distributed over the circumference.
Properties of cores under power conditions
B (mT) at
GRADE
3C20
2013 Jul 31
H = 1200 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
400
0.017
954
f = 100 kHz;
= 200 mT;
B
T = 100 C
0.11
Ferroxcube
TN13/7.5/5
13.0 0.35
PARAMETER
VALUE
UNIT
(I/A)
2.46
mm1
Ve
effective volume
368
mm3
Ie
effective length
30.1
mm
Ae
effective area
12.2
mm2
mass of core
1.8
6.6 0.35
Coating
(0.3)
coating PA11
5.4
0.3
MFP039
Dimensions in mm.
Isolation voltage
GRADE
3C20
AL(1)
(nH)
TYPE NUMBER
40 15%
90
TN13/5-3C20-A40
56 15%
125
TN13/5-3C20-A56
67 15%
147
TN13/5-3C20-A67
72 15%
160
TN13/5-3C20-A72
79 15%
1 73
TN13/5-3C20-A79
Note
1. Winding equally distributed over the circumference.
Properties of cores under power conditions
B (mT) at
GRADE
3C20
2013 Jul 31
H = 1200 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
400
0.033
955
f = 100 kHz;
= 200 mT;
B
T = 100 C
0.22
Ferroxcube
TN17/11/6.4
17.5 0.5
PARAMETER
VALUE
UNIT
(I/A)
2.24
mm1
Ve
effective volume
787
mm3
Ie
effective length
42.0
mm
Ae
effective area
18.7
mm2
mass of core
3.7
9.9 0.5
Coating
(0.3)
coating PA11
6.85
0.35
MFP040
Dimensions in mm.
Isolation voltage
GRADE
3C20
AL(1)
(nH)
52 15%
90
TN17/6.4-3C20-A52
72 15%
125
TN17/6.4-3C20-A72
88 15%
147
TN17/6.4-3C20-A88
92 15%
160
TN17/6.4-3C20-A92
104 15%
1 73
TN17/6.4-3C20-A104
TYPE NUMBER
Note
1. Winding equally distributed over the circumference.
Properties of cores under power conditions
B (mT) at
GRADE
3C20
2013 Jul 31
H = 1200 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
400
0.070
956
f = 100 kHz;
= 200 mT;
B
T = 100 C
0.47
Ferroxcube
TN20/10/6.4
20.6 0.6
PARAMETER
VALUE
UNIT
(I/A)
1.43
mm1
Ve
effective volume
1330
mm3
Ie
effective length
43.6
mm
Ae
effective area
30.5
mm2
mass of core
6.9
9.2 0.4
Coating
(0.3)
coating PA11
6.85
0.35
MFP041
Dimensions in mm.
Isolation voltage
GRADE
3C20
AL(1)
(nH)
68 15%
125
TN20/6.4-3C20-A68
81 15%
147
TN20/6.4-3C20-A81
87 15%
160
TN20/6.4-3C20-A87
96 15%
1 73
TN20/6.4-3C20-A96
109 15%
200
TN20/6.4-3C20-A109
TYPE NUMBER
Note
1. Winding equally distributed over the circumference.
Properties of cores under power conditions
B (mT) at
GRADE
3C20
2013 Jul 31
H = 1200 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
400
0.12
957
f = 100 kHz;
= 200 mT;
B
T = 100 C
0.80
Ferroxcube
TN23/14/7.5
24.0 0.7
PARAMETER
VALUE
UNIT
(I/A)
1.69
mm1
Ve
effective volume
1845
mm3
Ie
effective length
55.8
mm
Ae
effective area
33.1
mm2
mass of core
9.0
13.0 0.6
Coating
(0.3)
coating PA11
8.1
0.45
MFP042
Dimensions in mm.
Isolation voltage
GRADE
3C20
AL(1)
(nH)
TYPE NUMBER
65 15%
90
TN23/7.5-3C20-A65
90 15%
125
TN23/7.5-3C20-A90
106 15%
147
TN23/7.5-3C20-A106
115 15%
160
TN23/7.5-3C20-A115
124 15%
1 73
TN23/7.5-3C20-A124
Note
1. Winding equally distributed over the circumference.
Properties of cores under power conditions
B (mT) at
GRADE
3C20
2013 Jul 31
H = 1200 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
400
0.16
958
f = 100 kHz;
= 200 mT;
B
T = 100 C
1.1
Ferroxcube
TN26/15/11
26.8 0.7
PARAMETER
VALUE
UNIT
(I/A)
0.982
mm1
Ve
effective volume
3700
mm3
Ie
effective length
60.1
mm
Ae
effective area
61.5
mm2
mass of core
19
13.5 0.6
Coating
(0.3)
coating PA11
11.6
0.5
MFP043
Dimensions in mm.
Isolation voltage
GRADE
3C20
AL(1)
(nH)
TYPE NUMBER
113 15%
90
TN26/11-3C20-A113
157 15%
125
TN26/11-3C20-A157
185 15%
147
TN26/11-3C20-A185
201 15%
160
TN26/11-3C20-A201
217 15%
1 73
TN26/11-3C20-A217
Note
1. Winding equally distributed over the circumference.
Properties of cores under power conditions
B (mT) at
GRADE
3C20
2013 Jul 31
H = 1200 A/m;
f = 10 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
400
0.33
959
f = 100 kHz;
= 200 mT;
B
T = 100 C
2.2
Ferroxcube
Soft Ferrites
Ferrite toroids
CBW378
2013 Jul 31
960
Ferroxcube
Soft Ferrites
Ferrite toroids
Ae
(mm2)
MASS
(g)
TC2.5/1.3/0.8
TC2.5/1.3/1.3
2.7
4.29
0.49
0.76
0.012
0.022
TC2.5/1.3/2.5
TC2.5/1.5/0.8
8.57
2.21
1.55
0.37
CORE TYPE
Ve
(mm3)
Ae
(mm2)
MASS
(g)
TC9.5/4.8/3.2
TN10/6/4
148
188
7.16
7.8
0.70
0.95
0.044
0.012
TX10/6/4
TX13/7.1/4.8
188
361
7.8
12.3
0.95
1.8
CORE TYPE
TC2.5/1.5/1
2.94
0.49
0.015
TN13/7.5/5
368
12.2
1.8
TC3.1/1.3/1.3
TC3.1/1.8/2
6.35
9.10
1.06
1.26
0.033
0.05
TX13/7.5/5
TX13/7.9/6.4
368
442
12.2
14.1
1.8
2.2
TC3.4/1.8/1.3
TC3.4/1.8/2
7.3
11.6
0.96
1.54
0.035
0.06
TN14/9/5
TX14/9/5
430
430
12.3
12.3
2.1
2.1
TC3.4/1.8/2.1
TC3.4/1.8/2.3
11.5
14.0
1.52
1.83
0.06
0.068
TN14/9/9
774
22.1
3.8
TC3.5/1.6/1.3
8.3
1.15
0.043
TX14/9/9
TX16/9.1/4.7
774
548
22.1
14.7
3.8
2.7
TC3.5/1.8/1.3
TC3.5/1.8/1.8
7.87
11.0
1.03
1.44
0.04
0.06
TN16/9.6/6.3
TX16/9.6/6.3
760
760
19.7
19.7
3.8
3.8
TC3.5/1.8/2
TC3.9/1.8/1.8
12.4
14.8
1.62
1.83
0.05
0.09
TN19/11/10
TN19/11/15
1795
2692
40.8
61.2
9.2
13.8
TC3.9/1.8/2.5
21.1
2.6
0.12
TN20/10/7
1465
33.6
7.7
TC3.9/2.2/1.3
TC4/1.8/0.8
9.2
6.43
1.0
0.79
0.045
0.035
TX20/10/7
TX22/14/6.4
1465
1340
33.6
24.8
7.7
6.5
TC4/2/2
TC4/2.2/1.1
16.7
8.8
1.92
0.96
0.095
0.04
TX22/14/13
TN23/14/7
2750
1722
50.9
30.9
14
8.4
TC4/2.2/1.3
TC4/2.2/1.6
9.8
12.9
1.07
1.40
0.05
0.06
TN25/15/10
2944
48.9
15
TC4/2.2/1.8
14.4
1.56
0.07
TX25/15/10
TN26/15/10
2944
3360
48.9
55.9
15
17
TC4/2.2/2
TC4.8/2.3/1.3
16.1
15.5
1.75
1.52
0.08
0.09
TX26/15/10
TN26/15/20
3360
6720
55.9
112
17
34
TC5.8/3.1/0.8
TC5.8/3.1/1.5
13.2
26.1
1.01
2.00
0.07
0.13
TN29/11/6
TN29/19/7.5
2680
2700
50.8
36.9
14
13.5
TC5.8/3.1/3.2
55.8
4.28
0.31
TX29/19/7.5
2700
36.9
13.5
TC5.9/3.1/3.1
TC6/4/2
53.8
30.2
4.12
1.97
0.14
0.15
TX29/19/7.6
TN29/19/15
2600
5410
35.5
73.9
13
28
TC6/4/3
TC6.3/3.8/2.5
45.2
46.5
2.96
3.06
0.23
0.23
TX29/19/15
TN32/19/13
5410
5820
73.9
76.5
28
29
TC7.6/3.2/4.8
TC7.6/3.2/5.2
148
160
9.92
10.6
0.70
0.75
TX32/19/13
5820
76.5
29
TC8.2/3.7/4
144
8.50
0.70
TX36/23/10
TX36/23/15
5820
8740
64.9
97.5
28
40
TC9/6/3
TN9/6/3
102
102
4.44
4.44
0.50
0.50
TX39/20/13
TX40/24/16
9513
12100
112
125
45
62
TX9/6/3
102
4.44
0.50
TX40/24/20
15100
157
77
2013 Jul 31
961
Ferroxcube
Soft Ferrites
Ferrite toroids
Ve
(mm3)
Ae
(mm2)
MASS
(g)
TX42/26/13
TX42/26/18
9860
13810
95.8
134
53
55
TX50/30/19
2 2378
186
100
CORE TYPE
TX51/32/19
TX55/32/18
21500
26580
172
202
100
100
TX58/41/18
TX63/38/25
23200
46500
152
306
110
220
TX74/39/13
TX80/40/15
34300
50200
208
288
170
240
TX87/54/14
46400
217
220
T87/56/13
TX102/66/15
42133
68200
194
267
200
325
T107/65/18
TX107/65/18
96000
96000
370
370
456
456
T107/65/25
133 000
514
680
T140/106/25
TX140/106/25
161 100
161 100
422
422
800
800
TX152/104/19
176600
450
878
T N 36/23/15 3E25 X
special version
core material
core size OD/ID/HT
coating type: N polyamide 11 (nylon)
X epoxy
C parylene C
L lacquer
core type
2013 Jul 31
CBW183
962
Ferroxcube
Ferrite toroids
TC2.5/1.3/0.8
PARAMETER
VALUE
(I/A)
11.3
mm1
Ve
effective volume
2.7
mm3
Ie
effective length
5.53
mm
Ae
effective area
0.49
mm2
mass of core
0.012
2.54 0.1
handbook, halfpage
UNIT
Coating
1.27 0.1
(12 m)
Isolation voltage
CBW184
2013 Jul 31
AL
(nH)
94 +25/20%
850
963
TYPE NUMBER
TC2.5/1.3/0.8-4A11
Ferroxcube
Ferrite toroids
TC2.5/1.3/1.3
PARAMETER
VALUE
UNIT
(I/A)
7.14
mm1
Ve
effective volume
4.29
mm3
Ie
effective length
5.53
mm
Ae
effective area
0.76
mm2
mass of core
0.022 g
2.54 0.1
handbook, halfpage
Coating
1.27 0.1
;;;;
;;;;
(12 m)
Isolation voltage
1.27
0.1
CBW205
AL
(nH)
TYPE NUMBER
4A11
150 25%
850
TC2.5/1.3/1.3-4A11
3S4
300 25%
1700
TC2.5/1.3/1.3-3S4
3E25
970 30%
5500
TC2.5/1.3/1.3-3E25
3E6
1835 30%
10 000
TC2.5/1.3/1.3-3E6(1)
Note
1. Maximum tolerances on mechanical dimensions are 0.13 mm.
2013 Jul 31
964
Ferroxcube
Ferrite toroids
TC2.5/1.3/2.5
PARAMETER
VALUE
UNIT
(I/A)
3.57
mm1
Ve
effective volume
8.57
mm3
Ie
effective length
5.53
mm
Ae
effective area
1.55
mm2
mass of core
0.044
2.54 0.1
handbook, halfpage
Coating
1.27 0.1
(12 m)
Isolation voltage
CBW379
2013 Jul 31
AL
(nH)
1400 25%
4000
965
TYPE NUMBER
TC2.5/1.3/2.5-3E28
Ferroxcube
Ferrite toroids
TC2.5/1.5/0.8
PARAMETER
VALUE
UNIT
(I/A)
16.4
mm1
Ve
effective volume
2.21
mm3
Ie
effective length
6.02
mm
Ae
effective area
0.37
mm2
mass of core
0.012 g
2.5 0.1
handbook, halfpage
Coating
1.5 0.1
;;;;
;;;;
(12 m)
Isolation voltage
0.8
0.1
CBW206
2013 Jul 31
AL
(nH)
765 30%
10 000
966
TYPE NUMBER
TC2.5/1.5/0.8-3E6
Ferroxcube
Ferrite toroids
TC2.5/1.5/1
PARAMETER
VALUE
(I/A)
12.3
mm1
Ve
effective volume
2.94
mm3
Ie
effective length
6.02
mm
Ae
effective area
0.489
mm2
mass of core
0.015
2.5 0.1
handbook, halfpage
UNIT
Coating
1.5 0.1
; ;;
; ;;
(12 m)
1 0.1
Isolation voltage
CBW186
AL
(nH)
TYPE NUMBER
3E28
410 25%
4000
TC2.5/1.5/1-3E28
3E27
513 20%
5500
TC2.5/1.5/1-3E27
3E5
920 30%
9000
TC2.5/1.5/1-3E5
3E6
1020 30%
10 000
TC2.5/1.5/1-3E6
2013 Jul 31
967
Ferroxcube
Ferrite toroids
TC3.1/1.3/1.3
PARAMETER
VALUE
UNIT
(I/A)
5.65
mm1
Ve
effective volume
6.35
mm3
Ie
effective length
5.99
mm
Ae
effective area
1.06
mm2
mass of core
0.033 g
3.05 0.15
handbook, halfpage
Coating
1.27 0.15
;;;;
;;;;
(12 m)
1.27
0.15
Isolation voltage
CBW207
AL
(nH)
TYPE NUMBER
4A11
190 20%
850
TC3.1/1.3/1.3-4A11
3E25
1225 25%
5500
TC3.1/1.3/1.3-3E25
3E6
2225 30%
10000
TC3.1/1.3/1.3-3E6
2013 Jul 31
968
Ferroxcube
Ferrite toroids
TC3.1/1.8/2
PARAMETER
VALUE
(I/A)
5.75
mm1
Ve
effective volume
9.10
mm3
Ie
effective length
7.23
mm
Ae
effective area
1.26
mm2
mass of core
0.05
3.05 0.15
handbook, halfpage
UNIT
Coating
1.78 0.15
(12 m)
Isolation voltage
CBW380
2013 Jul 31
AL
(nH)
1100 25%
5000
969
TYPE NUMBER
TC3.1/1.8/2-3E28
Ferroxcube
Ferrite toroids
TC3.4/1.8/1.3
PARAMETER
VALUE
(I/A)
7.93
mm1
Ve
effective volume
7.3
mm3
Ie
effective length
7.62
mm
Ae
effective area
0.96
mm2
mass of core
0.035 g
3.43 0.18
handbook, halfpage
UNIT
Coating
1.78 0.18
(12 m)
1.27
0.18
Isolation voltage
CBW187
Dimensions in mm.
AL
(nH)
TYPE NUMBER
3D3
110 20%
750
TC3.4/1.8/1.3-3D3
3B7
375 20%
2300
TC3.4/1.8/1.3-3B7
3E27
660 20%
4200
TC3.4/1.8/1.3-3E27
3E6
1580 30%
10 000
TC3.4/1.8/1.3-3E6
2013 Jul 31
970
Ferroxcube
Ferrite toroids
TC3.4/1.8/2
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
4.9
mm1
Ve
effective volume
11.6
mm3
Ie
effective length
7.54
mm
Ae
effective area
1.54
mm2
mass of core
0.059 g
1.78 0.13
Coating
The cores are coated with parylene C, flame retardant in
accordance with UL 94V-2; UL file number E 194397.
The coating is transparent.
Maximum operating temperature is 90 C.
( 12 m)
2.03
0.13
Isolation voltage
MFW073
AL
(nH)
TYPE NUMBER
3E25
1420 25%
5500
TC3.4/1.8/2-3E25
3E7
3080 30%
12000
TC3.4/1.8/2-3E7
2013 Jul 31
971
Ferroxcube
Ferrite toroids
TC3.4/1.8/2.1
PARAMETER
3.38 0.13
VALUE
UNIT
(I/A)
4.97
mm1
Ve
effective volume
11.5
mm3
Ie
effective length
7.54
mm
Ae
effective area
1.52
mm2
mass of core
0.06
g
1.78 0.13
Coating
The cores are coated with parylene C, flame retardant in
accordance with UL 94V-2; UL file number E 194397.
The coating is transparent.
Maximum operating temperature is 90 C.
( 12 m)
2.06
0.13
Isolation voltage
CBW208
3E25
1420 25%
5600
TC3.4/1.8/2.1-3E25
3E28
1045 25%
4000
TC3.4/1.8/2.1-3E28
GRADE
2013 Jul 31
972
TYPE NUMBER
Ferroxcube
Ferrite toroids
TC3.4/1.8/2.3
PARAMETER
VALUE
UNIT
(I/A)
4.16
mm1
Ve
effective volume
14.0
mm3
Ie
effective length
7.63
mm
Ae
effective area
1.83
mm2
mass of core
0.068 g
1.78 0.1
Coating
The cores are coated with parylene C, flame retardant in
accordance with UL 94V-2; UL file number E 194397.
The coating is transparent.
Maximum operating temperature is 90 C.
( 12 m)
2.3
0.1
Isolation voltage
MFW074
2013 Jul 31
AL
(nH)
1207 25%
4000
973
TYPE NUMBER
TC3.4/1.8/2.3-3E28
Ferroxcube
Ferrite toroids
TC3.5/1.6/1.3
PARAMETER
VALUE
UNIT
(I/A)
6.32
mm1
Ve
effective volume
8.3
mm3
Ie
effective length
7.25
mm
Ae
effective area
1.15
mm2
mass of core
0.043 g
3.5 0.15
handbook, halfpage
Coating
1.6 0.15
;;;;
;;;;
(12 m)
1.27
0.15
Isolation voltage
CBW209
2013 Jul 31
AL
(nH)
862 20%
4300
974
TYPE NUMBER
TC3.5/1.6/1.3-3C11
Ferroxcube
Ferrite toroids
TC3.5/1.8/1.3
3.46 0.15
PARAMETER
VALUE
UNIT
(I/A)
7.44
mm1
Ve
effective volume
7.87
mm3
Ie
effective length
7.65
mm
Ae
effective area
1.03
mm2
mass of core
0.04
g
1.78 0.1
Coating
The cores are coated with parylene C, flame retardant in
accordance with UL 94V-2; UL file number E 194397.
The coating is transparent.
Maximum operating temperature is 90 C.
( 12 m)
Isolation voltage
MFW075
2013 Jul 31
AL
(nH)
930 25%
5500
975
TYPE NUMBER
TC3.5/1.8/1.3-3E27
Ferroxcube
Ferrite toroids
TC3.5/1.8/1.8
PARAMETER
VALUE
(I/A)
5.31
mm1
Ve
effective volume
11.0
mm3
Ie
effective length
7.65
mm
Ae
effective area
1.44
mm2
mass of core
0.06
3.46 0.15
handbook, halfpage
UNIT
Coating
1.78 0.1
(12 m)
Isolation voltage
CBW381
2013 Jul 31
AL
(nH)
950 25%
4000
976
TYPE NUMBER
TC3.5/1.8/1.8-3E28
Ferroxcube
Ferrite toroids
TC3.5/1.8/2
3.46 0.15
PARAMETER
VALUE
UNIT
(I/A)
4.73
mm1
Ve
effective volume
12.4
mm3
Ie
effective length
7.6
mm
Ae
effective area
1.62
mm2
mass of core
0.05
g
1.78 0.1
Coating
The cores are coated with parylene C, flame retardant in
accordance with UL 94V-2; UL file number E 194397.
The coating is transparent.
Maximum operating temperature is 90 C.
( 12 m)
2.0
0.1
Isolation voltage
MFW077
2013 Jul 31
AL
(nH)
1060 25%
4000
977
TYPE NUMBER
TC3.5/1.8/2-3E28
Ferroxcube
Ferrite toroids
TC3.9/1.8/1.8
PARAMETER
VALUE
(I/A)
4.44
mm1
Ve
effective volume
14.8
mm3
Ie
effective length
8.1
mm
Ae
effective area
1.83
mm2
mass of core
0.086 g
3.94 0.2
handbook, halfpage
UNIT
Coating
1.78 0.15
(12 m)
Isolation voltage
CBW382
2013 Jul 31
AL
(nH)
1400 30%
5000
978
TYPE NUMBER
TC3.9/1.8/1.8-3E28
Ferroxcube
Ferrite toroids
TC3.9/1.8/2.5
PARAMETER
VALUE
UNIT
(I/A)
3.11
mm1
Ve
effective volume
21.1
mm3
Ie
effective length
8.1
mm
Ae
effective area
2.6
mm2
mass of core
0.12
3.94 0.15
handbook, halfpage
Coating
1.78 0.15
(12 m)
Isolation voltage
CBW473
2013 Jul 31
AL
(nH)
2020 30%
4000
979
TYPE NUMBER
TC3.9/1.8/2.5-3E28
Ferroxcube
Ferrite toroids
TC3.9/2.2/1.3
PARAMETER
VALUE
handbook, halfpage
UNIT
(I/A)
9.20
mm1
Ve
effective volume
9.20
mm3
Ie
effective length
9.20
mm
Ae
effective area
1.00
mm2
mass of core
0.045 g
3.94 0.17
2.24 0.18
Coating
The cores are coated with parylene C, flame retardant in
accordance with UL 94V-2; UL file number E 194397.
The coating is transparent.
Maximum operating temperature is 90 C.
(12 m)
Isolation voltage
CBW188
AL
(nH)
TYPE NUMBER
3D3
97 20%
750
TC3.9/2.2/1.3-3D3
3B7
325 20%
2300
TC3.9/2.2/1.3-3B7
3E27
575 20%
4100
TC3.9/2.2/1.3-3E27
2013 Jul 31
980
Ferroxcube
Ferrite toroids
TC4/1.8/0.8
PARAMETER
VALUE
4.0 0.15
UNIT
(I/A)
10.3
mm1
Ve
effective volume
6.43
mm3
Ie
effective length
8.16
mm
Ae
effective area
0.79
mm2
mass of core
0.035 g
Coating
1.78 0.1
( 12 m)
Isolation voltage
MFW078
2013 Jul 31
AL
(nH)
486 25%
4000
981
TYPE NUMBER
TC4/1.8/0.8-3E28
Ferroxcube
Ferrite toroids
TC4/2/2
PARAMETER
VALUE
(I/A)
4.54
mm1
Ve
effective volume
16.7
mm3
Ie
effective length
8.71
mm
Ae
effective area
1.92
mm2
mass of core
0.095 g
4 0.15
handbook, halfpage
UNIT
Coating
2 0.1
(12 m)
Isolation voltage
CBW384
3C11
1190 25%
4300
3E28
1110 25%
4000
TC4/2/2-3E28
3E27
1623 20%
5500
TC4/2/2-3E27
GRADE
2013 Jul 31
982
TYPE NUMBER
TC4/2/2-3C11
Ferroxcube
Ferrite toroids
TC4/2.2/1.1
PARAMETER
VALUE
UNIT
(I/A)
9.55
mm1
Ve
effective volume
8.82
mm3
Ie
effective length
9.18
mm
Ae
effective area
0.961
mm2
mass of core
0.04
4 0.15
handbook, halfpage
;;;;
;;;;
2.2 0.1
Coating
The cores are coated with parylene C, flame retardant in
accordance with UL 94V-2; UL file number E 194397.
The coating is transparent.
Maximum operating temperature is 90 C.
(12 m)
1.1
0.1
CBW189
Isolation voltage
DC isolation voltage: 1000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
AL
(nH)
TYPE NUMBER
4C65
16 25%
125
TC4/2.2/1.1-4C65
4A11
92 25%
700(1)
TC4/2.2/1.1-4A11
3F3
260 25%
2000
TC4/2.2/1.1-3F3
3E25
725 30%
5500
TC4/2.2/1.1-3E25
3E5
1120 30%
8500
TC4/2.2/1.1-3E5
3E6
1315 30%
10 000
TC4/2.2/1.1-3E6
2013 Jul 31
983
Ferroxcube
Ferrite toroids
TC4/2.2/1.3
PARAMETER
VALUE
UNIT
(I/A)
8.28
mm1
Ve
effective volume
10.2
mm3
Ie
effective length
9.18
mm
Ae
effective area
1.11
mm2
mass of core
0.05
4 0.15
handbook, halfpage
Coating
2.2 0.1
;;;;
;;;;
(12.5 m)
Isolation voltage
1.27
0.1
CBW210
AL
(nH)
TYPE NUMBER
4A11
122 20%
800
TC4/2.2/1.3-4A11
3E25
720 25%
5500
TC4/2.2/1.3-3E25
2013 Jul 31
984
Ferroxcube
Ferrite toroids
TC4/2.2/1.6
PARAMETER
VALUE
(I/A)
6.56
mm1
Ve
effective volume
12.9
mm3
Ie
effective length
9.18
mm
Ae
effective area
1.4
mm2
mass of core
0.06
4 0.15
handbook, halfpage
UNIT
Coating
2.2 0.1
(12.5 m)
Isolation voltage
CBW190
AL
(nH)
TYPE NUMBER
4C65
24 25%
125
TC4/2.2/1.6-4C65
4A11
134 25%
700(1)
TC4/2.2/1.6-4A11
3S4
325 25%
1700
TC4/2.2/1.6-3S4
3F3
380 25%
2000
TC4/2.2/1.6-3F3
3E25
1050 30%
5500
TC4/2.2/1.6-3E25
3E5
1630 30%
8500
TC4/2.2/1.6-3E5
3E6
1915 30%
10 000
TC4/2.2/1.6-3E6
1.
2013 Jul 31
985
Ferroxcube
Ferrite toroids
TC4/2.2/1.8
PARAMETER
VALUE
(I/A)
5.89
mm1
Ve
effective volume
14.4
mm3
Ie
effective length
9.18
mm
Ae
effective area
1.56
mm2
mass of core
0.07
4 0.15
handbook, halfpage
UNIT
Coating
2.2 0.1
(12.5 m)
Isolation voltage
CBW385
2013 Jul 31
AL
(nH)
2130 30%
10 000
986
TYPE NUMBER
TC4/2.2/1.8-3E6
Ferroxcube
Ferrite toroids
TC4/2.2/2
4.0 0.15
PARAMETER
VALUE
UNIT
(I/A)
5.26
mm1
Ve
effective volume
16.1
mm3
Ie
effective length
9.18
mm
Ae
effective area
1.75
mm2
mass of core
0.08
g
2.2 0.1
Coating
The cores are coated with parylene C, flame retardant in
accordance with UL 94V-2; UL file number E 194397.
The coating is transparent.
Maximum operating temperature is 90 C.
( 12 m)
2.0
0.1
Isolation voltage
MFW081
AL
(nH)
TYPE NUMBER
3E25
1315 30%
5500
TC4/2.2/2-3E25
3E8
3590 30%
15000
TC4/2.2/2-3E8
2013 Jul 31
987
Ferroxcube
Ferrite toroids
TC4.8/2.3/1.3
PARAMETER
VALUE
4.8 0.15
UNIT
(I/A)
6.73
mm1
Ve
effective volume
15.5
mm3
Ie
effective length
10.2
mm
Ae
effective area
1.52
mm2
mass of core
0.09
Coating
2.3 0.1
( 12 m)
Isolation voltage
MFW080
AL
(nH)
TYPE NUMBER
3E27
1030 25%
5500
TC4.8/2.3/1.3-3E27
3B7
430 20%
2300
TC4.8/2.3/1.3-3B7
2013 Jul 31
988
Ferroxcube
Ferrite toroids
TC5.8/3.1/0.8
5.84 0.15
PARAMETER
VALUE
UNIT
(I/A)
12.9
mm1
Ve
effective volume
13.2
mm3
Ie
effective length
13.0
mm
Ae
effective area
1.01
mm2
mass of core
0.07
g
3.05 0.15
Coating
The cores are coated with parylene C, flame retardant in
accordance with UL 94V-2; UL file number E 194397.
The coating is transparent.
Maximum operating temperature is 90 C.
( 12 m)
Isolation voltage
DC isolation voltage: 1000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
2013 Jul 31
AL
(nH)
390 25%
4000
989
TYPE NUMBER
TC5.8/3.1/0.8-3E28
Ferroxcube
Ferrite toroids
TC5.8/3.1/1.5
PARAMETER
VALUE
(I/A)
6.52
mm1
Ve
effective volume
26.1
mm3
Ie
effective length
13.0
mm
Ae
effective area
2.00
mm2
mass of core
0.13
5.84 0.18
handbook, halfpage
UNIT
Coating
3.05 0.18
(12 m)
Isolation voltage
CBW192
AL
(nH)
TYPE NUMBER
4C65
25 25%
125
TC5.8/3.1/1.5-4C65
4B1
50 25%
250
TC5.8/3.1/1.5-4B1
3B7
450 20%
2300
TC5.8/3.1/1.5-3B7(1)
3E27
890 20%
4600
TC5.8/3.1/1.5-3E27
3E6
1960 30%
9925
TC5.8/3.1/1.5-3E6
3E8
2940 30%
15000
TC5.8/3.1/1.5-3E8
Note
1. OD = 6 0.18
2013 Jul 31
990
Ferroxcube
Ferrite toroids
TC5.8/3.1/3.2
PARAMETER
VALUE
(I/A)
3.04
mm1
Ve
effective volume
55.8
mm3
Ie
effective length
13.0
mm
Ae
effective area
4.28
mm2
mass of core
0.31
5.84 0.15
handbook, halfpage
UNIT
Coating
3.05 0.15
(12 m)
Isolation voltage
CBW386
AL
(nH)
TYPE NUMBER
3D3
310 20%
750
3B7
940 25%
2300
TC5.8/3.1/3.2-3B7(1)
TC5.8/3.1/3.2-3D3
3E28
1650 25%
4000
TC5.8/3.1/3.2-3E28
3E6
4130 30%
10000
TC5.8/3.1/3.2-3E6
Note
1. Dimensions with coating.
2013 Jul 31
991
Ferroxcube
Ferrite toroids
TC5.9/3.1/3.1
5.85 0.15
PARAMETER
VALUE
UNIT
(I/A)
3.16
mm1
Ve
effective volume
53.8
mm3
Ie
effective length
13.0
mm
Ae
effective area
4.12
mm2
mass of core
0.14
g
3.05 0.15
Coating
The cores are coated with parylene C, flame retardant in
accordance with UL 94V-2; UL file number E 194397.
The coating is transparent.
Maximum operating temperature is 90 C.
( 12 m)
3.05
0.15
Isolation voltage
MFW082
2013 Jul 31
AL
(nH)
3960 30%
i
10000
992
TYPE NUMBER
TC5.9/3.1/3.1-3E6
Ferroxcube
Ferrite toroids
TC6/4/2
PARAMETER
VALUE
(I/A)
7.75
mm1
Ve
effective volume
30.2
mm3
Ie
effective length
15.3
mm
Ae
effective area
1.97
mm2
mass of core
0.15
6 0.15
handbook, halfpage
UNIT
4 0.15
Coating
(12 m)
2
0.1
CBW193
Isolation voltage
DC isolation voltage: 1000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
AL
(nH)
TYPE NUMBER
4C65
20 25%
125
TC6/4/2-4C65
4A11
114 25%
700(1)
TC6/4/2-4A11
3S4
275 25%
1700
TC6/4/2-3S4
3F3
325 25%
2000
TC6/4/2-3F3
TC6/4/2-3E25
3E25
890 30%
5500
3E5
1380 30%
8500
TC6/4/2-3E5
3E6
1620 30%
10 000
TC6/4/2-3E6
1.
2013 Jul 31
993
Ferroxcube
Ferrite toroids
TC6/4/3
6.0 0.15
PARAMETER
VALUE
UNIT
(I/A)
5.17
mm1
Ve
effective volume
45.2
mm3
Ie
effective length
15.3
mm
Ae
effective area
2.96
mm2
mass of core
0.23
g
4.0 0.15
Coating
The cores are coated with parylene C, flame retardant in
accordance with UL 94V-2; UL file number E 194397.
The coating is transparent.
Maximum operating temperature is 90 C.
( 12 m)
3.0
0.15
Isolation voltage
MFW083
2013 Jul 31
AL
(nH)
2430 30%
i
10000
994
TYPE NUMBER
TC6/4/3-3E6
Ferroxcube
Ferrite toroids
TC6.3/3.8/2.5
PARAMETER
VALUE
UNIT
(I/A)
4.97
mm1
Ve
effective volume
46.5
mm3
Ie
effective length
15.2
mm
Ae
effective area
3.06
mm2
mass of core
0.23
6.3 0.15
handbook, halfpage
3.8 0.15
Coating
The cores are coated with parylene C, flame retardant in
accordance with UL 94V-2; UL file number E 194397.
The coating is transparent.
Maximum operating temperature is 90 C.
(12 m)
2.5
0.15
CBW194
Isolation voltage
DC isolation voltage: 1000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
4A11
177 25%
700(1)
TC6.3/3.8/2.5-4A11
3F3
500 25%
2000
TC6.3/3.8/2.5-3F3
3E25
1390 30%
5500
TC6.3/3.8/2.5-3E25
3E5
2150 30%
8500
TC6.3/3.8/2.5-3E5
3E6
2530 30%
10 000
TC6.3/3.8/2.5-3E6
3E7
12 000
TC6.3/3.8/2.5-3E7
GRADE
1.
2013 Jul 31
995
TYPE NUMBER
Ferroxcube
Ferrite toroids
TC7.6/3.2/4.8
7.6 0.25
handbook, halfpage
PARAMETER
VALUE
UNIT
(I/A)
1.51
mm1
Ve
effective volume
148
mm3
Ie
effective length
15.0
mm
Ae
effective area
9.92
mm2
mass of core
0.7
g
3.18 0.2
Coating
The cores are coated with parylene C, flame retardant in
accordance with UL 94V-2; UL file number E 194397.
The coating is transparent.
Maximum operating temperature is 90 C.
(12 m)
4.78
0.2
Isolation voltage
DC isolation voltage: 1000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
CBW195
AL
(nH)
TYPE NUMBER
3C90
1915 25%
2300
TC7.6/3.2/4.8-3C90
3E28
3800 30%
4000
TC7.6/3.2/4.8-3E28
3E6
8360 30%
10000
TC7.6/3.2/4.8-3E6
3E8
12500 30%
15000
TC7.6/3.2/4.8-3E8
2013 Jul 31
996
Ferroxcube
Ferrite toroids
TC7.6/3.2/5.2
7.6 0.25
PARAMETER
VALUE
UNIT
(I/A)
1.41
mm1
Ve
effective volume
160
mm3
Ie
effective length
15.0
mm
Ae
effective area
10.6
mm2
mass of core
0.75
g
3.18 0.2
Coating
The cores are coated with parylene C, flame retardant in
accordance with UL 94V-2; UL file number E 194397.
The coating is transparent.
Maximum operating temperature is 90 C.
( 12 m)
5.15
0.2
Isolation voltage
DC isolation voltage: 1000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
MFW084
2013 Jul 31
AL
(nH)
3580 25%
4000
997
TYPE NUMBER
TC7.6/3.2/5.2-3E28
Ferroxcube
Ferrite toroids
TC8.2/3.7/4
8.2 0.25
PARAMETER
VALUE
UNIT
(I/A)
1.99
mm1
Ve
effective volume
144
mm3
Ie
effective length
16.9
mm
Ae
effective area
8.5
mm2
mass of core
0.7
g
3.73 0.15
Coating
The cores are coated with parylene C, flame retardant in
accordance with UL 94V-2; UL file number E 194397.
The coating is transparent.
Maximum operating temperature is 90 C.
( 12 m)
4.0
0.15
Isolation voltage
MFW085
AL
(nH)
TYPE NUMBER
4A11
440 25%
700(1)
TC8.2/3.7/4-4A11
3E7
7560 30%
12000
TC8.2/3.7/4-3E7
1.
2013 Jul 31
998
Ferroxcube
Ferrite toroids
TC9/6/3
9.0 0.2
PARAMETER
VALUE
UNIT
(I/A)
5.17
mm1
Ve
effective volume
102
mm3
Ie
effective length
22.9
mm
Ae
effective area
4.44
mm2
mass of core
0.5
6.0 0.2
Coating
(12 m) parylene C
3.0
0.15
MFP049
Isolation voltage
Dimensions in mm.
AL
(nH)
TYPE NUMBER
3E5
2070 30%
8500
TC9/6/3-3E5
3E6
2435 30%
10000
TC9/6/3-3E6
2013 Jul 31
999
Ferroxcube
Ferrite toroids
TC9/6/3
Tag plate
General data
PARAMETER
SPECIFICATION
liquid crystal polymer (LCP), glass reinforced, flame retardant in accordance with
UL 94V-0; UL file number E54705
Solderability
13 max.
1.75
max.
1.8
14.7
max.
2.8
10.8
min.
12
11
1.8
0.8
0.3
CBW284
45
Dimensions in mm.
TYPE NUMBER
TGPS-9-8P-Z
Cover data
PARAMETER
0.6 (4)
SPECIFICATION
Cover material
Maximium
operating
temperature
Type number
COV-9
handbook, halfpage
11 0.1
CBW285
11.7 max.
0.6
Dimensions in mm.
2013 Jul 31
1000
6 max.
Ferroxcube
Ferrite toroids
TN9/6/3
9.5 0.3
handbook, halfpage
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
5.17
mm1
Ve
effective volume
102
mm3
Ie
effective length
22.9
mm
Ae
effective area
4.44
mm2
mass of core
0.5
;;;;
;;;;
5.4 0.3
Coating
(0.3)
coating PA11
3.4
0.25
CBW315
Dimensions in mm.
Isolation voltage
GRADE
TYPE NUMBER
4C65
30 25%
125
TN9/6/3-4C65
4A11
170 25%
700(1)
TN9/6/3-4A11
3R1(2)
800
TN9/6/3-3R1
3F3
440 25%
1 800
TN9/6/3-3F3
3C90
560 25%
2 300
TN9/6/3-3C90
3E25
1340 30%
5 500
TN9/6/3-3E25
1.
2.
Due to the rectangular BH-loop of 3R1, inductance values strongly depend on the magnetic state of the ring core and measuring
conditions. Therefore no AL value is specified. For the application in magnetic amplifiers AL is not a critical parameter.
WARNING
Do not use 3R1 cores close to their mechanical resonant frequency. For more information refer to 3R1 material
specification in this data handbook.
2013 Jul 31
1001
Ferroxcube
Ferrite toroids
TN9/6/3
Tag plate
General data
PARAMETER
SPECIFICATION
liquid crystal polymer (LCP), glass reinforced, flame retardant in accordance with
UL 94V-0; UL file number E54705
Solderability
13 max.
1.75
max.
1.8
14.7
max.
2.8
10.8
min.
12
11
1.8
0.8
0.3
CBW284
45
Dimensions in mm.
TYPE NUMBER
TGPS-9-8P-Z
Cover data
PARAMETER
0.6 (4)
SPECIFICATION
Cover material
Maximium
operating
temperature
Type number
COV-9
handbook, halfpage
11 0.1
CBW285
11.7 max.
0.6
Dimensions in mm.
2013 Jul 31
1002
6 max.
Ferroxcube
Ferrite toroids
TX9/6/3
9.3 0.4
PARAMETER
VALUE
UNIT
(I/A)
5.17
mm1
Ve
effective volume
102
mm3
Ie
effective length
22.9
mm
Ae
effective area
4.44
mm2
mass of core
0.5
5.75 0.3
Coating
( 0.12)
coating EPOXY
3.25
0.3
MFP046
Isolation voltage
Dimensions in mm.
AL
(nH)
TYPE NUMBER
3E25
1340 30%
5 500
TX9/6/3-3E25
3E5
2070 30%
8 500
TX9/6/3-3E5
2013 Jul 31
1003
Ferroxcube
Ferrite toroids
TX9/6/3
Tag plate
General data
PARAMETER
SPECIFICATION
liquid crystal polymer (LCP), glass reinforced, flame retardant in accordance with
UL 94V-0; UL file number E54705
Solderability
13 max.
1.75
max.
1.8
14.7
max.
2.8
10.8
min.
12
11
1.8
0.8
0.3
CBW284
45
Dimensions in mm.
TYPE NUMBER
TGPS-9-8P-Z
Cover data
PARAMETER
0.6 (4)
SPECIFICATION
Cover material
Maximium
operating
temperature
Type number
COV-9
handbook, halfpage
11 0.1
CBW285
11.7 max.
0.6
Dimensions in mm.
2013 Jul 31
1004
6 max.
Ferroxcube
Ferrite toroids
TC9.5/4.8/3.2
PARAMETER
VALUE
(I/A)
2.98
mm1
Ve
effective volume
144
mm3
Ie
effective length
20.7
mm
Ae
effective area
6.95
mm2
mass of core
0.7
9.52 0.31
handbook, halfpage
UNIT
Coating
4.75 0.18
(12 m)
3.18
0.17
Isolation voltage
CBW196
Dimensions in mm.
AL
(nH)
TYPE NUMBER
3D3
330 20%
750
3F3
890 25%
2000
TC9.5/4.8/3.2-3F3(1)
3B7
1 000 20%
2300
TC9.5/4.8/3.2-3B7
3C81
1 200 20%
2700
TC9.5/4.8/3.2-3C81
3E27
2 135 20%
4900
TC9.5/4.8/3.2-3E27
3E6
4 390 30%
10100
TC9.5/4.8/3.2-3E6(1)
3E7
5 323 30%
12000
TC9.5/4.8/3.2-3E7(1)
3E8
6590 30%
15000
TC9.5/4.8/3.2-3E8(1)
Note
1. Dimensions with coating.
2013 Jul 31
1005
TC9.5/4.8/3.2-3D3
Ferroxcube
Ferrite toroids
TN10/6/4
PARAMETER
VALUE
(I/A)
3.07
mm1
Ve
effective volume
188
mm3
Ie
effective length
24.1
mm
Ae
effective area
7.8
mm2
mass of core
0.95
10.6 0.3
handbook, halfpage
UNIT
;;;;
;;;;
5.2 0.3
Coating
(0.3)
coating PA11
4.4
0.3
CBW314
Isolation voltage
Dimensions in mm.
GRADE
TYPE NUMBER
4C65
52 25%
125
TN10/6/4-4C65
4A11
286 25%
700(1)
TN10/6/4-4A11
3D3
306 25%
3R1(2)
750
TN10/6/4-3D3
800
TN10/6/4-3R1
3F3
740 25%
1 800
TN10/6/4-3F3
3C90
940 25%
2 300
TN10/6/4-3C90
3C11
1750 25%
4 300
TN10/6/4-3C11
3E25
2250 30%
5 500
TN10/6/4-3E25
1.
2.
Due to the rectangular BH-loop of 3R1, inductance values strongly depend on the magnetic state of the ring core and measuring
conditions. Therefore no AL value is specified. For the application in magnetic amplifiers AL is not a critical parameter.
WARNING
Do not use 3R1 cores close to their mechanical resonant frequency. For more information refer to 3R1 material
specification in this data handbook.
2013 Jul 31
1006
Ferroxcube
Ferrite toroids
TN10/6/4
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
3C90
320
0.021
0.021
3F3
320
0.03
0.04
GRADE
2013 Jul 31
1007
f = 400 kHz;
= 50 mT;
B
T = 100 C
Ferroxcube
Ferrite toroids
TX10/6/4
PARAMETER
VALUE
UNIT
(I/A)
3.07
mm1
Ve
effective volume
188
mm3
Ie
effective length
24.1
mm
Ae
effective area
7.8
mm2
mass of core
0.95
5.75 0.3
Coating
( 0.12)
coating EPOXY
4.25
0.3
MFW093
Isolation voltage
DC isolation voltage: 1000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
Dimensions in mm.
AL
(nH)
TYPE NUMBER
3E5
3470 30%
8 500
TX10/6/4-3E5
3E6
4 085 30%
10 000
TX10/6/4-3E6
2013 Jul 31
1008
Ferroxcube
Ferrite toroids
TX13/7.1/4.8
PARAMETER
12.95 0.4
VALUE
UNIT
(I/A)
2.40
mm1
Ve
effective volume
361
mm3
Ie
effective length
29.5
mm
Ae
effective area
12.3
mm2
mass of core
1.8
g
6.9 0.35
Coating
The cores are coated with epoxy, flame retardant in
accordance with UL 94V-0; UL file number E 228348.
The colour is white.
Maximum operating temperature is 200 C.
( 0.12)
coating EPOXY
5.03
0.3
Isolation voltage
CBW387
Dimensions in mm.
AL
(nH)
TYPE NUMBER
3D3
415 20%
750
TX13/7.1/4.8-3D3
3F3
990 20%
1 800
TX13/7.1/4.8-3F3
3C90
1260 20%
2 300
TX13/7.1/4.8-3C90
3C81
1475 20%
2 700
TX13/7.1/4.8-3C81
3E27
2750 20%
5 000
TX13/7.1/4.8-3E27
3E6
5400 30%
10400
TX13/7.1/4.8-3E6
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C81
320
0.08
3C90
320
0.036
0.036
3F3
320
0.04
0.07
2013 Jul 31
1009
Ferroxcube
Ferrite toroids
TN13/7.5/5
13.0 0.35
handbook, halfpage
PARAMETER
VALUE
UNIT
(I/A)
2.46
mm1
Ve
effective volume
368
mm3
Ie
effective length
30.1
mm
Ae
effective area
12.2
mm2
mass of core
1.8
;;;;
;;;;
6.8 0.35
(0.3)
Coating
The cores are coated with polyamide 11 (PA11), flame
retardant in accordance with UL 94V-2 ; UL file number
E 45228 (M). The colour is white.
Maximum operating temperature is 160 C.
coating PA11
5.4
0.3
CBW313
Isolation voltage
Dimensions in mm.
AL
(nH)
TYPE NUMBER
4C65
64 25%
125
TN13/7.5/5-4C65
4A11
358 25%
700(1)
TN13/7.5/5-4A11
3F4
460 25%
900
TN13/7.5/5-3F4
4A15
610 25%
1200
TN13/7.5/5-4A15
3F3
900 25%
1 800
TN13/7.5/5-3F3
3C90
1170 25%
2 300
TN13/7.5/5-3C90
3C11
2200 25%
4 300
TN13/7.5/5-3C11
3E25
2810 30%
5 500
TN13/7.5/5-3E25
3R1(2)
TN13/7.5/5-3R1
1.
2.
Due to the rectangular BH-loop of 3R1, inductance values strongly depend on the magnetic state of the ring core and measuring
conditions. Therefore no AL value is specified. For the application in magnetic amplifiers AL is not a critical parameter.
WARNING
Do not use 3R1 cores close to their mechanical resonant frequency. For more information refer to 3R1 material specification in this
data handbook.
2013 Jul 31
1010
Ferroxcube
Ferrite toroids
TN13/7.5/5
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
3C90
320
0.041
0.041
3F3
320
0.04
0.07
GRADE
2013 Jul 31
1011
f = 400 kHz;
= 50 mT;
B
T = 100 C
Ferroxcube
Ferrite toroids
TX13/7.5/5
PARAMETER
VALUE
UNIT
(I/A)
2.46
mm1
Ve
effective volume
368
mm3
Ie
effective length
30.1
mm
Ae
effective area
12.2
mm2
mass of core
1.8
g
7.25 0.35
Coating
( 0.12)
coating EPOXY
5.25
0.3
MFW094
Isolation voltage
Dimensions in mm.
AL
(nH)
TYPE NUMBER
3E5
4340 30%
8500
TX13/7.5/5-3E5
3E6
5095 30%
10 000
TX13/7.5/5-3E6
2013 Jul 31
1012
Ferroxcube
Ferrite toroids
TX13/7.9/6.4
PARAMETER
12.95 0.4
VALUE
UNIT
(I/A)
2.21
mm1
Ve
effective volume
442
mm3
Ie
effective length
31.2
mm
Ae
effective area
14.1
mm2
mass of core
2.2
g
7.67 0.4
Coating
The cores are coated with epoxy, flame retardant in
accordance with UL 94V-0; UL file number E 228348.
The colour is white.
Maximum operating temperature is 200 C.
( 0.12)
coating EPOXY
6.6
0.4
Isolation voltage
DC isolation voltage: 1500 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
CBW388
Dimensions in mm.
AL
(nH)
TYPE NUMBER
75 25%
125
3F3
1100 20%
1 800
TX13/7.9/6.4-3F3
3C90
1380 20%
2 300
TX13/7.9/6.4-3C90
3C81
1620 20%
2 700
TX13/7.9/6.4-3C81
3E27
3000 20%
5 000
TX13/7.9/6.4-3E27
3E25
3000 20%
5 000
TX13/7.9/6.4-3E25
3E6
5900 30%
10600
TX13/7.9/6.4-3E6
4C65
TX13/7.9/6.4-4C65
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C81
320
0.10
3C90
320
0.044
0.044
3F3
320
0.05
0.09
2013 Jul 31
1013
Ferroxcube
Ferrite toroids
TN14/9/5
SYMBOL
14.6 0.4
handbook, halfpage
VALUE
UNIT
mm1
(I/A)
Ve
effective volume
430
mm3
Ie
effective length
35
mm
Ae
effective area
12.3
mm2
mass of core
2.1
2.84
;;;;
;;;;
8.2 0.35
(0.3)
Coating
The cores are coated with polyamide 11 (PA11), flame
retardant in accordance with UL 94V-2 ; UL file number
E 45228 (M). The colour is white.
Maximum operating temperature is 160 C.
coating PA11
5.5
0.3
CBW312
Dimensions in mm.
Isolation voltage
AL
(nH)
TYPE NUMBER
4C65
55 25%
125
TN14/9/5-4C65
4A11
310 25%
700(1)
TN14/9/5-4A11
3R1(2)
800
TN14/9/5-3R1
790 25%
1800
TN14/9/5-3F3
3C90
1 015 25%
2300
TN14/9/5-3C90
3C11
1 900 25%
4300
TN14/9/5-3C11
3E25
2 430 30%
5500
TN14/9/5-3E25
3F3
1.
2.
Due to the rectangular BH-loop of 3R1, inductance values strongly depend on the magnetic state of the ring core and measuring
conditions. Therefore no AL value is specified. For the application in magnetic amplifiers AL is not a critical parameter.
WARNING
Do not use 3R1 cores close to their mechanical resonant frequency. For more information refer to 3R1 material
specification in this data handbook.
Properties of cores under power conditions
B (mT) at
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
3C90
320
0.048
0.048
3F3
320
GRADE
2013 Jul 31
0.05
1014
f = 400 kHz;
= 50 mT;
B
T = 100 C
0.08
Ferroxcube
Ferrite toroids
TX14/9/5
14.25 0.4
PARAMETER
VALUE
UNIT
(I/A)
2.84
mm1
Ve
effective volume
430
mm3
Ie
effective length
35
mm
Ae
effective area
12.3
mm2
mass of core
2.1
g
8.75 0.35
Coating
The cores are coated with epoxy, flame retardant in
accordance with UL 94V-0; UL file number E 228348.
The colour is white.
Maximum operating temperature is 200 C.
( 0.12)
coating EPOXY
5.25
0.3
MFW095
Isolation voltage
DC isolation voltage: 1500 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
Dimensions in mm.
AL
(nH)
TYPE NUMBER
3E5
3760 30%
8500
TX14/9/5-3E5
3E6
4415 30%
10000
TX14/9/5-3E6
2013 Jul 31
1015
Ferroxcube
Ferrite toroids
TN14/9/9
PARAMETER
VALUE
UNIT
(I/A)
1.58
mm1
Ve
effective volume
774
mm3
Ie
effective length
35
mm
Ae
effective area
22.1
mm2
mass of core
3.8
14.8 0.4
handbook, halfpage
;;;;
;;;;
8.0 0.4
Coating
The cores are coated with polyamide 11 (PA11), flame
retardant in accordance with UL 94V-2 ; UL file number
E 45228 (M).
The colour is white.
Maximum operating temperature is 160 C.
(0.3)
coating PA11
9.5
0.4
CBW311
Isolation voltage
DC isolation voltage: 1500 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
Dimensions in mm.
AL
(nH)
TYPE NUMBER
557 25%
700(1)
TN14/9/9-4A11
1430 25%
1800
TN14/9/9-3F3
3C90
1825 25%
2300
TN14/9/9-3C90
3C11
3400 25%
4300
TN14/9/9-3C11
3E25
4370 30%
5500
TN14/9/9-3E25
1.
H = 250 A/m;
f = 25 kHz;
T = 100 D
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
3C90
320
0.087
0.087
3F3
320
0.09
0.15
GRADE
2013 Jul 31
1016
f = 400 kHz;
= 50 mT;
B
T = 100 C
Ferroxcube
Ferrite toroids
TX14/9/9
14.25 0.4
PARAMETER
VALUE
UNIT
(I/A)
1.58
mm1
Ve
effective volume
774
mm3
Ie
effective length
35
mm
Ae
effective area
22.1
mm2
mass of core
3.8
g
8.75 0.35
Coating
The cores are coated with epoxy, flame retardant in
accordance with UL 94V-0; UL file number E 228348.
The colour is white.
Maximum operating temperature is 200 C.
( 0.12)
coating EPOXY
9.25
0.4
MFW096
Isolation voltage
DC isolation voltage: 1500 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
Dimensions in mm.
AL
(nH)
TYPE NUMBER
3E5
6760 30%
8500
TX14/9/9-3E5
3E6
7955 30%
10000
TX14/9/9-3E6
2013 Jul 31
1017
Ferroxcube
Ferrite toroids
TX16/9.1/4.7
PARAMETER
16.13 0.5
VALUE
UNIT
(I/A)
2.53
mm1
Ve
effective volume
548
mm3
Ie
effective length
37.2
mm
Ae
effective area
14.7
mm2
mass of core
2.7
g
8.82 0.4
Coating
The cores are coated with epoxy, flame retardant in
accordance with UL 94V-0; UL file number E 228348.
The colour is white.
Maximum operating temperature is 200 C.
( 0.12)
coating EPOXY
4.95
0.3
CBW389
Isolation voltage
DC isolation voltage: 1500 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
Dimensions in mm.
AL
(nH)
TYPE NUMBER
3C90
1 215 20%
2300
TX16/9.1/4.7-3C90
3C81
1 400 20%
2700
TX16/9.1/4.7-3C81
3E27
2 600 20%
5000
TX16/9.1/4.7-3E27
3E6
5 200 30%
10500
TX16/9.1/4.7-3E6
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
3C81
320
0.11
3C90
320
0.055
0.055
2013 Jul 31
1018
Ferroxcube
Ferrite toroids
TN16/9.6/6.3
PARAMETER
VALUE
UNIT
(I/A)
1.95
mm1
Ve
effective volume
760
mm3
Ie
effective length
38.5
mm
Ae
effective area
19.7
mm2
mass of core
3.8
16.7 0.5
handbook, halfpage
;;;;
;;;;
8.7 0.4
Coating
The cores are coated with polyamide 11 (PA11), flame
retardant in accordance with UL 94V-2 ; UL file number
E 45228 (M).
The colour is white.
Maximum operating temperature is 160 C.
(0.3)
coating PA11
6.8
0.4
CBW310
Isolation voltage
DC isolation voltage: 1500 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
Dimensions in mm.
AL
(nH)
TYPE NUMBER
450 25%
700(1)
TN16/9.6/6.3-4A11
1 160 25%
1800
TN16/9.6/6.3-3F3
3C90
1480 25%
2300
TN16/9.6/6.3-3C90
3C11
2 700 25%
4300
TN16/9.6/6.3-3C11
3E25
3 540 30%
5500
TN16/9.6/6.3-3E25
4A11
3F3
1.
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
3C90
320
0.085
0.085
3F3
320
0.09
0.15
GRADE
2013 Jul 31
1019
f = 400 kHz;
= 50 mT;
B
T = 100 C
Ferroxcube
Ferrite toroids
TX16/9.6/6.3
PARAMETER
VALUE
UNIT
(I/A)
1.95
mm1
Ve
effective volume
760
mm3
Ie
effective length
38.5
mm
Ae
effective area
19.7
mm2
mass of core
3.8
g
9.35 0.4
Coating
The cores are coated with epoxy, flame retardant in
accordance with UL 94V-0; UL file number E 228348.
The colour is white.
Maximum operating temperature is 200 C.
( 0.12)
coating EPOXY
6.55
0.4
MFW097
Isolation voltage
DC isolation voltage: 1500 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
Dimensions in mm.
AL
(nH)
TYPE NUMBER
3E5
5 470 30%
8500
TX16/9.6/6.3-3E5
3E6
6 430 30%
10000
TX16/9.6/6.3-3E6
2013 Jul 31
1020
Ferroxcube
Ferrite toroids
TN19/11/10
PARAMETER
VALUE
UNIT
(I/A)
1.08
mm1
Ve
effective volume
1795
mm3
Ie
effective length
44.0
mm
Ae
effective area
40.8
mm2
mass of core
9.2
19.7 0.3
handbook, halfpage
9.7 0.4
Coating
The cores are coated with polyamide 11 (PA11), flame
retardant in accordance with UL 94V-2 ; UL file number
E 45228 (M).
The colour is white.
Maximum operating temperature is 160 C.
(0.3)
coating PA11
10.5
0.5
CBW201
Isolation voltage
DC isolation voltage: 1500 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
Dimensions in mm.
3C90
2 680 25%
2300
TN19/11/10-3C90
3C11
5 000 25%
4300
TN19/11/10-3C11
3E25
6 420 25%
5500
TN19/11/10-3E25
GRADE
TYPE NUMBER
3C90
2013 Jul 31
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
320
0.20
0.20
1021
Ferroxcube
Ferrite toroids
TN19/11/15
PARAMETER
VALUE
UNIT
(I/A)
0.718
mm1
Ve
effective volume
2692
mm3
Ie
effective length
44.0
mm
Ae
effective area
61.2
mm2
mass of core
13.8
19.9 0.6
handbook, halfpage
Coating
;;;;
;;;;
9.5 0.4
(0.3)
coating PA11
15.5
0.55
CBW309
Isolation voltage
DC isolation voltage: 1500 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
Dimensions in mm.
3C90
4020 25%
2 300
TN19/11/15-3C90
3C11
7500 25%
4 300
TN19/11/15-3C11
3E25
9630 25%
5 500
TN19/11/15-3E25
GRADE
TYPE NUMBER
3C90
2013 Jul 31
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
320
0.30
0.30
1022
Ferroxcube
Ferrite toroids
TN20/10/7
PARAMETER
VALUE
UNIT
(I/A)
1.30
mm1
Ve
effective volume
1465
mm3
Ie
effective length
43.6
mm
Ae
effective area
33.6
mm2
mass of core
7.7
20.6 0.6
handbook, halfpage
Coating
;;;;
;;;;
9.2 0.4
(0.3)
coating PA11
7.5
0.45
CBW308
Isolation voltage
DC isolation voltage: 2000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
Dimensions in mm.
GRADE
TYPE NUMBER
4C65
121 25%
125
TN20/10/7-4C65
3C90
2230 25%
2 300
TN20/10/7-3C90
3C11
4150 25%
4 300
TN20/10/7-3C11
3E25
5340 25%
5 500
TN20/10/7-3E25
3C90
2013 Jul 31
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
320
0.15
0.16
1023
Ferroxcube
Ferrite toroids
TX20/10/7
20.25 0.6
PARAMETER
VALUE
UNIT
(I/A)
1.30
mm1
Ve
effective volume
1465
mm3
Ie
effective length
43.6
mm
Ae
effective area
33.6
mm2
mass of core
7.7
g
9.75 0.4
Coating
The cores are coated with epoxy, flame retardant in
accordance with UL 94V-0; UL file number E 228348.
The colour is white.
Maximum operating temperature is 200 C.
( 0.12)
coating EPOXY
7.4
0.45
Isolation voltage
MFW098
Dimensions in mm.
AL
(nH)
TYPE NUMBER
3E5
8250 30%
8 500
TX20/10/7-3E5
3E6
9685 30%
10 000
TX20/10/7-3E6
2013 Jul 31
1024
Ferroxcube
Ferrite toroids
TX22/14/6.4
PARAMETER
22.35 0.7
VALUE
UNIT
(I/A)
2.20
mm1
Ve
effective volume
1340
mm3
Ie
effective length
54.2
mm
Ae
effective area
24.8
mm2
mass of core
6.5
Coating
13.47 0.6
( 0.12)
coating EPOXY
6.75
0.4
Isolation voltage
CBW390
Dimensions in mm.
AL
(nH)
TYPE NUMBER
4C65
75 25%
125
3D3
454 20%
750
TX22/14/6.4-3D3
3C90
1400 20%
2 300
TX22/14/6.4-3C90
3C81
1650 20%
2 700
TX22/14/6.4-3C81
3E27
3055 20%
5 300
TX22/14/6.4-3E27
3E6
6000 30%
10500
TX22/14/6.4-3E6
TX22/14/6.4-4C65
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C81
320
0.21
3C90
320
0.13
0.13
GRADE
2013 Jul 31
1025
f = 100 kHz;
= 100 mT;
B
T = 100 C
Ferroxcube
Ferrite toroids
TX22/14/13
PARAMETER
22.35 0.7
VALUE
UNIT
(I/A)
1.07
mm1
Ve
effective volume
2 750
mm3
Ie
effective length
54.2
mm
Ae
effective area
50.9
mm2
mass of core
14
g
13.47 0.6
Coating
The cores are coated with epoxy, flame retardant in
accordance with UL 94V-0; UL file number E 228348.
The colour is white.
Maximum operating temperature is 200 C.
( 0.12)
coating EPOXY
12.95
0.6
Isolation voltage
DC isolation voltage: 2000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
CBW391
Dimensions in mm.
3F3
2 200 20%
1800
TX22/14/13-3F3
3C90
2795 20%
2300
TX22/14/13-3C90
3E27
6110 20%
5000
TX22/14/13-3E27
3E6
12080 30%
10 300
TX22/14/13-3E6
GRADE
TYPE NUMBER
3F3
2013 Jul 31
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
320
0.30
0.52
1026
Ferroxcube
Ferrite toroids
TN23/14/7
PARAMETER
VALUE
UNIT
(I/A)
1.81
mm1
Ve
effective volume
1722
mm3
Ie
effective length
55.8
mm
Ae
effective area
30.9
mm2
mass of core
8.4
23.7 0.7
handbook, halfpage
c
o
r
e
;;;;
;;;;
13.1 0.6
Coating
The cores are coated with polyamide 11 (PA11), flame
retardant in accordance with UL 94V-2 ; UL file number
E 45228 (M).
The colour is white.
Maximum operating temperature is 160 C.
(0.3)
coating PA11
7.5
0.45
CBW307
Isolation voltage
Dimensions in mm.
AL
(nH)
TYPE NUMBER
4C65
87 25%
125
TN23/14/7-4C65
4A11
486 25%
700(1)
TN23/14/7-4A11
3R1(2)
3F3
800
TN23/14/7-3R1
1250 25%
1 800
TN23/14/7-3F3
3C90
1600 25%
2 300
TN23/14/7-3C90
3C11
3000 25%
4 300
TN23/14/7-3C11
3E25
3820 25%
5 500
TN23/14/7-3E25
1.
2.
Due to the rectangular BH-loop of 3R1, inductance values strongly depend on the magnetic state of the ring core and measuring
conditions. Therefore no AL value is specified. For the application in magnetic amplifiers AL is not a critical parameter.
WARNING
Do not use 3R1 cores close to their mechanical resonant frequency. For more information refer to 3R1 material
specification in this data handbook.
2013 Jul 31
1027
d
a
t
a
Ferroxcube
Ferrite toroids
TN23/14/7
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C90
320
0.19
3F3
320
GRADE
2013 Jul 31
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
0.19
0.19
1028
0.33
Ferroxcube
Ferrite toroids
TN25/15/10
PARAMETER
VALUE
UNIT
(I/A)
1.23
mm1
Ve
effective volume
2 944
mm3
Ie
effective length
60.2
mm
Ae
effective area
48.9
mm2
mass of core
15
25.8 0.7
handbook, halfpage
Coating
;;;;
;;;;
14.0 0.6
(0.3)
coating PA11
10.6
0.5
CBW306
Isolation voltage
DC isolation voltage: 2000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
Dimensions in mm.
3F3
1840 25%
1 800
TN25/15/10-3F3
3C90
2350 25%
2 300
TN25/15/10-3C90
3C11
4400 25%
4 300
TN25/15/10-3C11
3E25
5620 25%
5 500
TN25/15/10-3E25
GRADE
TYPE NUMBER
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C90
320
0.33
0.33
3F3
320
0.32
0.56
GRADE
2013 Jul 31
1029
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
Ferroxcube
Ferrite toroids
TX25/15/10
25.25 0.7
PARAMETER
VALUE
UNIT
(I/A)
1.23
mm1
Ve
effective volume
2 944
mm3
Ie
effective length
60.2
mm
Ae
effective area
48.9
mm2
mass of core
15
g
14.75 0.6
Coating
The cores are coated with epoxy, flame retardant in
accordance with UL 94V-0; UL file number E 228348.
The colour is white.
Maximum operating temperature is 200 C.
( 0.12)
coating EPOXY
10.4
0.5
Isolation voltage
MFW099
Dimensions in mm.
AL
(nH)
TYPE NUMBER
3E5
8 680 30%
8500
TX25/15/10-3E5
3E6
10200 30%
10000
TX25/15/10-3E6
2013 Jul 31
1030
Ferroxcube
Ferrite toroids
TN26/15/10
PARAMETER
VALUE
UNIT
(I/A)
1.08
mm1
Ve
effective volume
3 360
mm3
Ie
effective length
60.1
mm
Ae
effective area
55.9
mm2
mass of core
17
26.8 0.7
handbook, halfpage
;;;;
;;;;
13.5 0.6
Coating
The cores are coated with polyamide 11 (PA11), flame
retardant in accordance with UL 94V-2 ; UL file number
E 45228 (M).
The colour is white.
Maximum operating temperature is 160 C.
(0.3)
coating PA11
10.6
0.5
CBW305
Isolation voltage
DC isolation voltage: 2000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
Dimensions in mm.
AL
(nH)
TYPE NUMBER
4A11
817 25%
700(1)
TN26/15/10-4A11
3C90
2645 25%
2300
TN26/15/10-3C90
3C11
5000 25%
4300
TN26/15/10-3C11
3E25
6420 25%
5500
TN26/15/10-3E25
1.
3C90
2013 Jul 31
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
320
0.38
0.38
1031
Ferroxcube
Ferrite toroids
TX26/15/10
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
1.08
mm1
Ve
effective volume
3 360
mm3
Ie
effective length
60.1
mm
Ae
effective area
55.9
mm2
mass of core
17
Coating
14.25 0.6
( 0.12)
coating EPOXY
10.4
0.5
Isolation voltage
DC isolation voltage: 2000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
MFW100
Dimensions in mm.
2013 Jul 31
AL
(nH)
10000 30%
8500
1032
TYPE NUMBER
TX26/15/10-3E5
Ferroxcube
Ferrite toroids
TN26/15/20
PARAMETER
VALUE
(I/A)
0.538
mm1
Ve
effective volume
6720
mm3
Ie
effective length
60.1
mm
Ae
effective area
112
mm2
mass of set
34
26.9 0.7
handbook, halfpage
UNIT
;;;;
;;;;
13.2 0.6
Coating
(0.3)
coating PA11
20.5
0.6
CBW304
Isolation voltage
Dimensions in mm.
3C90
5400 25%
2 300
TN26/15/20-3C90
3C11
10 000 25%
4 300
TN26/15/20-3C11
3E25
12 800 25%
5 500
TN26/15/20-3E25
GRADE
TYPE NUMBER
3C90
2013 Jul 31
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
320
0.75
0.75
1033
Ferroxcube
Ferrite toroids
TN29/11/6
29.6 0.7
PARAMETER
VALUE
UNIT
(I/A)
1.04
mm1
Ve
effective volume
2680
mm3
Ie
effective length
52.9
mm
Ae
effective area
50.8
mm2
mass of core
14
10 0.4
Coating
(0.3)
coating PA11
6.4
0.4
CBW303
Dimensions in mm.
Isolation voltage
AL
(nH)
TYPE NUMBER
3C90
2780 20%
2300
TN29/11/6-3C90
3C11
5100 25%
4300
TN29/11/6-3C11
3C90
2013 Jul 31
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
320
0.3
0.3
1034
T = 100 C
Ferroxcube
Ferrite toroids
TN29/19/7.5
PARAMETER
VALUE
UNIT
(I/A)
1.98
mm1
Ve
effective volume
2700
mm3
Ie
effective length
73.2
mm
Ae
effective area
36.9
mm2
mass of core
13.5
29.7 0.7
handbook, halfpage
;;;;
;;;;
18.2 0.6
Coating
The cores are coated with polyamide 11 (PA11), flame
retardant in accordance with UL 94V-2 ; UL file number
E 45228 (M).
The colour is white.
Maximum operating temperature is 160 C.
(0.3)
coating PA11
8.1
0.5
CBW303
Isolation voltage
DC isolation voltage: 2000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
Dimensions in mm.
AL
(nH)
TYPE NUMBER
3C90
1 460 25%
2300
TN29/19/7.5-3C90
3C11
2 700 25%
4300
TN29/19/7.5-3C11
3E25
3 550 25%
5500
TN29/19/7.5-3E25
3C90
2013 Jul 31
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
320
0.30
0.30
1035
Ferroxcube
Ferrite toroids
TX29/19/7.5
29.25 0.7
PARAMETER
VALUE
UNIT
(I/A)
1.98
mm1
Ve
effective volume
2700
mm3
Ie
effective length
73.2
mm
Ae
effective area
36.9
mm2
mass of core
13.5
g
18.75 0.6
Coating
The cores are coated with epoxy, flame retardant in
accordance with UL 94V-0; UL file number E 228348.
The colour is white.
Maximum operating temperature is 200 C.
( 0.12)
coating EPOXY
7.9
0.5
Isolation voltage
MFW101
Dimensions in mm.
2013 Jul 31
AL
(nH)
6 340 30%
10000
1036
TYPE NUMBER
TX29/19/7.5-3E6
Ferroxcube
Ferrite toroids
TX29/19/7.6
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
2.06
mm1
Ve
effective volume
2600
mm3
Ie
effective length
73.2
mm
Ae
effective area
35.5
mm2
mass of core
13
Coating
18.75 0.6
( 0.12)
coating EPOXY
7.85
0.5
CBW392
Isolation voltage
DC isolation voltage: 2000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
Dimensions in mm.
3C81
1740 20%
2 800
TX29/19/7.6-3C81
3E27
3225 20%
5 300
TX29/19/7.6-3E27
GRADE
TYPE NUMBER
GRADE
3C81
2013 Jul 31
B (mT) at
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
320
0.53
1037
Ferroxcube
Ferrite toroids
TN29/19/15
PARAMETER
VALUE
(I/A)
0.98
mm1
Ve
effective volume
5410
mm3
Ie
effective length
73.2
mm
Ae
effective area
73.9
mm2
mass of core
28
29.9 0.7
handbook, halfpage
UNIT
18.1 0.6
Coating
(0.3)
coating PA11
15.5
0.6
CBW393
Isolation voltage
DC isolation voltage: 2000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
Dimensions in mm.
AL
(nH)
TYPE NUMBER
3C90
2960 20%
2300
TN29/19/15-3C90
3E25
7000 25%
5500
TN29/19/15-3E25
3C90
2013 Jul 31
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
320
0.61
0.61
1038
Ferroxcube
Ferrite toroids
TX29/19/15
29.25 0.7
PARAMETER
VALUE
UNIT
(I/A)
0.98
mm1
Ve
effective volume
5410
mm3
Ie
effective length
73.2
mm
Ae
effective area
73.9
mm2
mass of core
28
Coating
18.75 0.6
( 0.12)
coating EPOXY
15.45
0.6
Isolation voltage
MFW102
Dimensions in mm.
AL
(nH)
TYPE NUMBER
3E5
10780 30%
8500
TX29/19/15-3E5
3E6
12850 30%
10000
TX29/19/15-3E6
2013 Jul 31
1039
Ferroxcube
Ferrite toroids
TN32/19/13
PARAMETER
VALUE
UNIT
(I/A)
0.99
mm1
Ve
effective volume
5820
mm3
Ie
effective length
76
mm
Ae
effective area
76.5
mm2
mass of core
29
32.2 0.8
handbook, halfpage
Coating
;;;;
;;;;
18.1 0.6
(0.3)
coating PA11
13
0.5
CBW302
Isolation voltage
DC isolation voltage: 2000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
Dimensions in mm.
AL
(nH)
TYPE NUMBER
885 25%
700(1)
TN32/19/13-4A11
3F3
2 270 25%
1800
TN32/19/13-3F3
3C90
2910 25%
2300
TN32/19/13-3C90
3C11
5450 25%
4300
TN32/19/13-3C11
3E25
6950 25%
5500
TN32/19/13-3E25
4A11
1.
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
3C90
320
0.65
0.65
3F3
320
0.64
1.1
GRADE
2013 Jul 31
1040
f = 400 kHz;
= 50 mT;
B
T = 100 C
Ferroxcube
Ferrite toroids
TX32/19/13
PARAMETER
VALUE
UNIT
(I/A)
0.99
mm1
Ve
effective volume
5820
mm3
Ie
effective length
76
mm
Ae
effective area
76.5
mm2
mass of core
29
31.75 0.8
handbook, halfpage
18.75 0.7
Coating
The cores are coated with epoxy, flame retardant in
accordance with UL 94V-0; UL file number E 228348.
The colour is white.
Maximum operating temperature is 200 C.
(0.25)
coating epoxy
12.9
0.5
MFP050
Isolation voltage
DC isolation voltage: 2000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
Dimensions in mm.
2013 Jul 31
AL
(nH)
10700 30%
8 500
1041
TYPE NUMBER
TX32/19/13-3E5
Ferroxcube
Ferrite toroids
TX36/23/10
36.25 0.9
PARAMETER
VALUE
UNIT
(I/A)
1.38
mm1
Ve
effective volume
5820
mm3
Ie
effective length
89.7
mm
Ae
effective area
64.9
mm2
mass of core
27
g
22.75 0.7
Coating
The cores are coated with epoxy, flame retardant in
accordance with UL 94V-0; UL file number E 228348.
The colour is white.
Maximum operating temperature is 200 C.
( 0.12)
coating EPOXY
10.42
0.5
Isolation voltage
MFW087
Dimensions in mm.
AL
(nH)
TYPE NUMBER
4C65
112 25%
125
TX36/23/10-4C65
3C90
2060 25%
2300
TX36/23/10-3C90
3C81
2455 20%
2700
TX36/23/10-3C81
3C11
3900 25%
4300
TX36/23/10-3C11
3E27
4545 20%
5000
TX36/23/10-3E27
3E6
9090 30%
10000
TX36/23/10-3E6
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
3C90
320
0.64
0.64
3C81
320
1.1
GRADE
2013 Jul 31
1042
Ferroxcube
Soft Ferrites
TX36/23/15
PARAMETER
VALUE
mm1
(I/A)
Ve
effective volume
8740
mm3
Ie
effective length
89.7
mm
Ae
effective area
97.5
mm2
mass of core
40
0.919
36.25 0.9
UNIT
Coating
22.75 0.7
( 0.12)
coating EPOXY
15.4
0.6
Isolation voltage
DC isolation voltage: 2000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
CBW395
Dimensions in mm.
AL
(nH)
TYPE NUMBER
4C65
170 25%
125
TX36/23/15-4C65
4A11
940 25%
700(1)
TX36/23/15-4A11
3R1(2)
800
TX36/23/15-3R1
3S4
2285 25%
1 700
TX36/23/15-3S4
3F3
2420 25%
1 800
TX36/23/15-3F3
3C90
3090 20%
2 300
TX36/23/15-3C90
3C81
3670 20%
2 700
TX36/23/15-3C81
3C11
5800 25%
4 300
TX36/23/15-3C11
3E25
7390 25%
5 500
TX36/23/15-3E25
3E27
6800 20%
5 000
TX36/23/15-3E27
3E5
11400 30%
8500
TX36/23/15-3E5
3E6
13 600 30%
10400
TX36/23/15-3E6
1.
2.
Due to the rectangular BH-loop of 3R1, inductance values strongly depend on the magnetic state of the ring core
and measuring conditions. Therefore no AL value is specified. For the application in magnetic amplifiers AL is not
a critical parameter.
2013 Jul 31
1043
Ferroxcube
Soft Ferrites
TX36/23/15
WARNING
Do not use 3R1 cores close to their mechanical resonant frequency. For more information refer to 3R1 material
specification in this data handbook.
Properties of cores under power conditions
B (mT) at
GRADE
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C81
320
1.7
3C90
320
0.96
0.96
3F3
320
0.95
1.7
2013 Jul 31
1044
Ferroxcube
Ferrite toroids
TX39/20/13
PARAMETER
VALUE
39.1 0.7
UNIT
(I/A)
0.76
mm1
Ve
effective volume
9513
mm3
Ie
effective length
84.9
mm
Ae
effective area
112
mm2
mass of core
45
Coating
19.3 0.7
( 0.12)
coating EPOXY
13.2
0.38
Isolation voltage
CBW396
Dimensions in mm.
GRADE
TYPE NUMBER
3F3
3150 20%
1800
TX39/20/13-3F3
3C90
3800 20%
2 300
TX39/20/13-3C90
3C81
4700 20%
2 700
TX39/20/13-3C81
3E27
8720 20%
5 000
TX39/20/13-3E27
3E6
16700 30%
9600
TX39/20/13-3E6
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
3C81
320
1.9
3C90
320
1.1
1.1
3F3
320
1.1
1.8
2013 Jul 31
1045
Ferroxcube
Ferrite toroids
TX40/24/16
PARAMETER
VALUE
UNIT
(I/A)
0.769
mm1
Ve
effective volume
12100
mm3
Ie
effective length
96.3
mm
Ae
effective area
125
mm2
mass of core
62
40.25 1.4
Coating
The cores are coated with epoxy, flame retardant in
accordance with UL 94V-0; UL file number E 228348.
The colour is white.
Maximum operating temperature is 200 C.
23.75 0.9
( 0.12)
coating EPOXY
16.4
0.7
Isolation voltage
DC isolation voltage: 2000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
MFP225
Dimensions in mm.
GRADE
TYPE NUMBER
3F3
3000 25 %
1835
TX40/24/16-3F3
3C90
3500 25 %
2140
TX40/24/16-3C90
3C11
6800 25 %
4160
TX40/24/16-3C11
3E26
10800 25 %
6610
TX40/24/16-3E26
3E27
9363 25 %
5730
TX40/24/16-3E27
3E5
12900 30 %
7890
TX40/24/16-3E5
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C90
320
1.4
1.4
3F3
320
1.4
2.3
GRADE
2013 Jul 31
1046
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
Ferroxcube
Ferrite toroids
TX40/24/20
PARAMETER
VALUE
UNIT
(I/A)
0.615
mm1
Ve
effective volume
15100
mm3
Ie
effective length
96.3
mm
Ae
effective area
157
mm2
mass of core
77
40.25 1.4
Coating
The cores are coated with epoxy, flame retardant in
accordance with UL 94V-0; UL file number E 228348.
The colour is white.
Maximum operating temperature is 200 C.
23.75 0.9
( 0.12)
coating EPOXY
20.4
0.7
Isolation voltage
DC isolation voltage: 2000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
MFP224
Dimensions in mm.
3E27
11600 25 %
5680
TX40/24/20-3E27
3E5
16300 30 %
7980
TX40/24/20-3E5
GRADE
2013 Jul 31
1047
TYPE NUMBER
Ferroxcube
Ferrite toroids
TX42/26/13
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
1.076
mm1
Ve
effective volume
9860
mm3
Ie
effective length
103
mm
Ae
effective area
95.8
mm2
mass of core
53
Coating
25.95 0.8
( 0.12)
coating EPOXY
13
0.5
Isolation voltage
MFW088
Dimensions in mm.
AL
(nH)
TYPE NUMBER
3C90
2690 25%
2300
TX42/26/13-3C90
3C11
5000 25%
4300
TX42/26/13-3C11
3E25
6425 25%
5500
TX42/26/13-3E25
3E27
6425 25%
5500
TX42/26/13-3E27
4A11
820 25%
700(1)
TX42/26/13-4A11
1.
3C90
2013 Jul 31
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
320
1.1
1.1
1048
Ferroxcube
Ferrite toroids
TX42/26/18
PARAMETER
VALUE
42.05 1.1
UNIT
(I/A)
0.769
mm1
Ve
effective volume
13810
mm3
Ie
effective length
103
mm
Ae
effective area
134
mm2
mass of core
55
Coating
25.95 0.8
( 0.12)
coating EPOXY
18
0.7
Isolation voltage
MFW089
Dimensions in mm.
2013 Jul 31
AL
(nH)
12900 30%
8 500
1049
TYPE NUMBER
TX42/26/18-3E5
Ferroxcube
Ferrite toroids
TX50/30/19
50.25 1.1
PARAMETER
VALUE
UNIT
(I/A)
0.65
mm1
Ve
effective volume
22 378
mm3
Ie
effective length
120.4
mm
Ae
effective area
186
mm2
mass of core
100
g
29.75 0.8
Coating
The cores are coated with epoxy, flame retardant in
accordance with UL 94V-0; UL file number E 228348.
The colour is white.
Maximum operating temperature is 200 C.
( 0.12)
coating EPOXY
19.5
0.6
MFW090
Isolation voltage
DC isolation voltage: 2000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
Dimensions in mm.
2013 Jul 31
AL
(nH)
19400 30%
10000
1050
TYPE NUMBER
TX50/30/19-3E6
Ferroxcube
Ferrite toroids
TX51/32/19
PARAMETER
VALUE
51.05 1.5
UNIT
(I/A)
0.73
mm1
Ve
effective volume
21500
mm3
Ie
effective length
125
mm
Ae
effective area
172
mm2
mass of core
100
Coating
31.5 1
( 0.12)
coating EPOXY
19.3
0.6
Isolation voltage
CBW398
Dimensions in mm.
3F3
3200 20%
1800
TX51/32/19-3F3
3C90
3980 20%
2300
TX51/32/19-3C90
3C81
4800 20%
2700
TX51/32/19-3C81
3E25
8890 20%
5000
TX51/32/19-3E25
3E27
8890 20%
5000
TX51/32/19-3E27
3E6
17300 30%
10000
TX51/32/19-3E6
GRADE
TYPE NUMBER
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C81
320
4.4
3C90
320
2.4
2.4
3F3
320
2.4
4.1
GRADE
2013 Jul 31
1051
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
Ferroxcube
Ferrite toroids
TX55/32/18
PARAMETER
VALUE
UNIT
(I/A)
0.651
mm1
Ve
effective volume
26580
mm3
Ie
effective length
132
mm
Ae
effective area
202
mm2
mass of core
134
55.8 1.7
handbook, halfpage
Coating
32.1 1
epoxy
18.3
0.9
Isolation voltage
CBW399
Dimensions in mm.
AL
(nH)
TYPE NUMBER
4A11
1350 25%
700(1)
TX55/32/18-4A11
3C11
8300 25%
4300
TX55/32/18-3C11
3E25
10620 25%
5 500
TX55/32/18-3E25
3E27
10620 25%
5 500
TX55/32/18-3E27
1.
2013 Jul 31
1052
Ferroxcube
Ferrite toroids
TX58/41/18
PARAMETER
core factor (C1)
VALUE
UNIT
1.0
mm1
Ve
effective volume
23200
mm3
Ie
effective length
152
mm
Ae
effective area
152
mm2
mass of core
110
58.7 1.1
handbook, halfpage
Coating
40.5 0.9
epoxy
17.9
0.7
Isolation voltage
MGC226
Dimensions in mm.
3C90
2890 25%
2 300
TX58/41/18-3C90
3C11
5400 25%
4 300
TX58/41/18-3C11
3E25
6900 25%
5 500
TX58/41/18-3E25
GRADE
TYPE NUMBER
3C90
2013 Jul 31
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
320
2.6
2.6
1053
Ferroxcube
Ferrite toroids
TX63/38/25
PARAMETER
VALUE
UNIT
(I/A)
0.497
mm1
Ve
effective volume
46500
mm3
Ie
effective length
152
mm
Ae
effective area
306
mm2
mass of core
220
63.4 2.1
Coating
37.7 1.3
( 0.12)
coating EPOXY
25.3
1
Isolation voltage
DC isolation voltage: 2000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
MFW091
GRADE
TYPE NUMBER
3F3
4550 25 %
1800
TX63/38/25-3F3
3E25
13900 25 %
5500
TX63/38/25-3E25
3E6
2 5280 30 %
10 000
TX63/38/25-3E6
3F3
2013 Jul 31
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
320
5.1
8.8
1054
Ferroxcube
Ferrite toroids
TX74/39/13
73.91 1.52
PARAMETER
VALUE
UNIT
(I/A)
0.80
mm1
Ve
effective volume
34300
mm3
Ie
effective length
165
mm
Ae
effective area
208
mm2
mass of core
170
g
38.61 1.32
Coating
The cores are coated with epoxy, flame retardant in
accordance with UL 94V-0; UL file number E 235873.
The colour is white.
Maximum operating temperature is 200 C.
( 0.12)
12.95
0.6
coating EPOXY
CBW401
Isolation voltage
DC isolation voltage: 2000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
Dimensions in mm.
3F3
2 900 20%
1800
TX74/39/13-3F3
3C90
3 620 20%
2300
TX74/39/13-3C90
3C81
4 350 20%
2700
TX74/39/13-3C81
3E25
8 060 20%
5000
TX74/39/13-3E25
3E6
15776 30%
10000
TX74/39/13-3E6
GRADE
TYPE NUMBER
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
3C81
320
7.0
3C90
320
4.0
4.0
3F3
320
3.8
8.1
GRADE
2013 Jul 31
1055
f = 100 kHz;
= 100 mT;
B
T = 100 C
f = 400 kHz;
= 50 mT;
B
T = 100 C
Ferroxcube
Ferrite toroids
TX80/40/15
PARAMETER
VALUE
80.4 2.6
UNIT
(I/A)
0.604
mm1
Ve
effective volume
50200
mm3
Ie
effective length
174
mm
Ae
effective area
288
mm2
mass of core
240
Coating
39.7 1.3
epoxy
15.3 0.6
Isolation voltage
MFW092
Dimensions in mm.
AL
(nH)
4780 25%
2 300
TYPE NUMBER
TX80/40/15-3C90
3C90
2013 Jul 31
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
320
6.0
6.0
1056
Ferroxcube
Ferrite toroids
TX87/54/14
PARAMETER
VALUE
UNIT
(I/A)
0.987
mm1
Ve
effective volume
46400
mm3
Ie
effective length
214
mm
Ae
effective area
217
mm2
mass of core
220
87.4 1.35
handbook, halfpage
Coating
The cores are coated with epoxy, flame retardant in
accordance with UL 94V-0; UL file number E 235873.
The colour is white.
Maximum operating temperature is 200 C.
54 1
epoxy
13.8 0.45
Isolation voltage
DC isolation voltage: 2000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
CBW197
Dimensions in mm.
3C90
2930 25%
2 300
TX87/54/14-3C90
3C11
5470 25%
4 300
TX87/54/14-3C11
GRADE
TYPE NUMBER
3C90
2013 Jul 31
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
320
5.5
5.5
1057
Ferroxcube
Ferrite toroids
T87/56/13
PARAMETER
VALUE
UNIT
(I/A)
1.123
mm1
Ve
effective volume
42 133
mm3
Ie
effective length
217.5
mm
Ae
effective area
194
mm2
mass of core
200
87 1.25
handbook, halfpage
56 0.9
Coating
Coated cores are available on request.
12.7
0.25
CBW585
Dimensions in mm.
2013 Jul 31
AL
(nH)
11190 30%
10000
1058
TYPE NUMBER
T87/56/13-3E6
Ferroxcube
Ferrite toroids
TX102/66/15
PARAMETER
core factor (C1)
VALUE
UNIT
0.956
mm1
Ve
effective volume
68200
mm3
Ie
effective length
255
mm
Ae
effective area
267
mm2
mass of core
325
102.4 2.1
handbook, halfpage
Coating
The cores are coated with epoxy, flame retardant in
accordance with UL 94V-0; UL file number E 235873.
The colour is white.
Maximum operating temperature is 200 C.
65.5 1.4
epoxy
15.3 0.7
Isolation voltage
CBW402
Dimensions in mm.
AL
(nH)
TYPE NUMBER
4C65
165 25%
125
TX102/66/15-4C65
3C11
5300 25%
4 300
TX102/66/15-3C11
3E25
7900 25%
5 500
TX102/66/15-3E25
2013 Jul 31
1059
Ferroxcube
Ferrite toroids
T107/65/18
PARAMETER
VALUE
107 2
UNIT
(I/A)
0.700
mm1
Ve
effective volume
96000
mm3
Ie
effective length
259
mm
Ae
effective area
370
mm2
mass of core
456
Coating
65 1.3
Dimensions in mm.
2013 Jul 31
AL
(nH)
1354 25%
750
1060
TYPE NUMBER
T107/65/18-3F4
Ferroxcube
Ferrite toroids
TX107/65/18
107.4 2.1
PARAMETER
VALUE
UNIT
(I/A)
0.700
mm1
Ve
effective volume
96000
mm3
Ie
effective length
259
mm
Ae
effective area
370
mm2
mass of core
456
g
64.7 1.4
Coating
The cores are coated with epoxy, flame retardant in
accordance with UL 94V-0; UL file number E 235873.
The colour is white.
Maximum operating temperature is 200 C.
epoxy
18.3
0.55
Isolation voltage
CBW198
Dimensions in mm.
GRADE
TYPE NUMBER
3F3
3230 25%
1800
TX107/65/18-3F3
3E25
9900 25%
5500
TX107/65/18-3E25
3F3
2013 Jul 31
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 100 kHz;
= 100 mT;
B
f = 400 kHz;
= 50 mT;
B
T = 100 C
T = 100 C
320
10.6
18.2
1061
Ferroxcube
Ferrite toroids
T107/65/25
PARAMETER
VALUE
UNIT
107 2
handbook, halfpage
mm1
(I/A)
0.504
Ve
effective volume
133000 mm3
Ie
effective length
259
mm
Ae
effective area
514
mm2
mass of core
680
;; ;;
;; ;;
Coating
65 1.3
25 0.75
MGB652
Dimensions in mm.
AL
(nH)
TYPE NUMBER
3F4
1870 25%
750
T107/65/25-3F4
3F3
4485 25%
1800
T107/65/25-3F3
2013 Jul 31
1062
Ferroxcube
Ferrite toroids
T140/106/25
PARAMETER
VALUE
UNIT
140 3
handbook, halfpage
mm1
(I/A)
0.903
Ve
effective volume
161100 mm3
Ie
effective length
382
mm
Ae
effective area
422
mm2
mass of core
800
Coating
106 2
Dimensions in mm.
AL
(nH)
TYPE NUMBER
3C90
3200 20%
2300
T140/106/25-3C90
3E25
7700 30%
5500
T140/106/25-3E25
3C90
2013 Jul 31
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
320
22.7
22.7
1063
Ferroxcube
Ferrite toroids
TX140/106/25
140.4 3.1
PARAMETER
VALUE
UNIT
mm1
(I/A)
0.903
Ve
effective volume
161100 mm3
Ie
effective length
382
mm
Ae
effective area
422
mm2
mass of core
800
105.7 2.1
Coating
( 0.12)
coating EPOXY
25.3
1.1
MFP044
Dimensions in mm.
Isolation voltage
DC isolation voltage: 2000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
AL
(nH)
TYPE NUMBER
3C90
3200 20%
2300
TX140/106/25-3C90
3E25
7700 30%
5500
TX140/106/25-3E25
3C90
2013 Jul 31
H = 250 A/m;
f = 25 kHz;
T = 100 C
f = 25 kHz;
= 200 mT;
B
T = 100 C
f = 100 kHz;
= 100 mT;
B
T = 100 C
320
22.7
22.7
1064
Ferroxcube
Ferrite toroids
T152/104/19
PARAMETER
VALUE
UNIT
mm1
(I/A)
0.873
Ve
effective volume
176600 mm3
Ie
effective length
393
mm
Ae
effective area
450
mm2
mass of core
878
152 5
handbook, halfpage
Coating
Coated cores are available on request.
104 3.6
19 + 0.5
MFP142
Dimensions in mm.
3C11
6000 25 %
4300
T152/104/19-3C11
3E27
8500 25 %
6000
T152/104/19-3E27
GRADE
2013 Jul 31
1065
TYPE NUMBER
Ferroxcube
Alloy powder
CBW378
2013 Jul 31
1066
Ferroxcube
Alloy powder
Ve
(mm 3)
Ae
(mm 2)
MASS
(FOR i 125)
(g)
T X 6.6/2.5 M2 A69 X
MPP
SD
HF
TX3.6/1.8/1.5
11.2
1.37
0.09
0.07
special version
TX3.9/2.2/2.5
TX4.7/2.4/2.5
19.9
30.3
2.11
2.85
0.17
0.25
0.12
0.18
AL value (nH)
TX6.4/2.8/2.8
TX6.6/2.7/2.5
64.0
64.9
4.70
4.76
0.59
0.58
0.39
0.40
0.55
0.55
TX6.6/2.7/4.8
125
9.20
1.09
0.77
1.03
TX6.9/4/5.1
TX7.9/4/3.2
120
110
7.25
6.15
1.00
0.92
0.74
0.68
0.94
0.87
TX9.7/4.8/3.2
TX9.7/4.8/4
164
206
7.52
9.45
1.40
1.80
1.01
1.44
1.30
1.70
TX10/5.1/4
238
10.0
1.91
1.46
1.80
TX11/6.4/4
TX13/7.6/4.8
244
356
9.06
11.4
2.12
3.07
1.50
2.20
1.99
2.90
TX16/10/6.4
TX17/9.7/6.4
789
960
19.2
23.2
6.78
8.16
4.98
5.90
6.34
7.70
MATERIAL
PERMEABILITY
RELATIVE DENSITY
TX20/13/6.4
TX23/14/7.6
1150
1880
22.6
33.1
9.40
15.9
7.10
11.5
8.90
15.0
14
0.80
26
0.86
TX24/14/8.9
2280
38.8
19.9
14.0
18.8
60
0.94
TX27/15/11
TX33/20/11
4150
5480
65.4
67.2
35.8
46.9
25.5
33.7
33.8
44.2
75
0.96
90
0.97
TX34/23/8.9
TX36/22/11
4060
6090
45.4
67.8
34.9
51.8
25.0
37.4
32.9
48.9
125
1.00
TX40/24/15
10500
107
91.7
64.9
86.5
160
1.02
TX47/24/18
TX47/28/15
21300
15600
199
134
181
130
131
95.8
171
123
200
1.03
300
1.03
TX51/32/14
TX57/26/15
15900
28600
125
229
141
240
98.1
176
133
226
TX57/36/14
TX78/49/13
20650
34700
144
177
175
288
127
200(1)
165
272
TX78/49/16
45300
227
377
262(1)
356
Table 1
2013 Jul 31
MFP 134
1067
Ferroxcube
TX3.6/1.8/1.5
3.88 0.32
PARAMETER
VALUE UNIT
(I/A)
5.96
mm1
Ve
effective volume
11.2
mm3
Ie
effective length
8.17
mm
Ae
effective area
1.37
mm2
mass of core
(for i 125)
MPP
0.09
Sendust
0.07
1.52 0.26
Coating
(0.16)
coating EPOXY
1.84
0.32
MFP147
Dimensions in mm.
Isolation voltage
GRADE
MPP
Sendust
2013 Jul 31
B (mT) at
H = 100 kA/m;
f = 10 kHz;
T = 25 C
f = 100 kHz;
= 100 mT;
B
26 8 %
125
800
0.008
TX3.6/1.5-M2-A26
31 8 %
147
800
0.009
TX3.6/1.5-M2-A31
AL
(nH)
TYPE NUMBER
T = 25 C
33 8 %
160
800
0.009
TX3.6/1.5-M2-A33
36 8 %
173
800
0.009
TX3.6/1.5-M2-A36
42 8 %
200
800
0.017
TX3.6/1.5-M2-A42
62 8 %
300
800
0.017
TX3.6/1.5-M2-A62
13 15 %
60
1030
0.010
TX3.6/1.5-S7-A13
16 15 %
75
1040
0.010
TX3.6/1.5-S7-A16
19 15 %
90
1050
0.010
TX3.6/1.5-S7-A19
26 15 %
125
1060
0.010
TX3.6/1.5-S7-A26
1068
Ferroxcube
TX3.9/2.2/2.5
4.26 0.32
PARAMETER
VALUE UNIT
(I/A)
4.46
mm1
Ve
effective volume
19.9
mm3
Ie
effective length
9.42
mm
Ae
effective area
2.11
mm2
mass of core
(for i 125)
MPP
0.17
Sendust
0.12
1.98 0.26
Coating
(0.16)
coating EPOXY
2.86
0.32
MFP148
Dimensions in mm.
Isolation voltage
GRADE
MPP
Sendust
2013 Jul 31
B (mT) at
H = 100 kA/m;
f = 10 kHz;
T = 25 C
f = 100 kHz;
= 100 mT;
B
35 8 %
125
800
0.015
TX3.9/2.5-M2-A35
41 8 %
147
800
0.016
TX3.9/2.5-M2-A41
AL
(nH)
TYPE NUMBER
T = 25 C
45 8 %
160
800
0.016
TX3.9/2.5-M2-A45
48 8 %
173
800
0.016
TX3.9/2.5-M2-A48
56 8 %
200
800
0.030
TX3.9/2.5-M2-A56
84 8 %
300
800
0.030
TX3.9/2.5-M2-A84
17 15 %
60
1030
0.017
TX3.9/2.5-S7-A17
21 15 %
75
1040
0.017
TX3.9/2.5-S7-A21
25 15 %
90
1050
0.017
TX3.9/2.5-S7-A25
35 15 %
125
1060
0.017
TX3.9/2.5-S7-A35
1069
Ferroxcube
TX4.7/2.4/2.5
4.97 0.32
PARAMETER
VALUE UNIT
(I/A)
3.73
mm1
Ve
effective volume
30.3
mm3
Ie
effective length
10.62
mm
Ae
effective area
2.85
mm2
mass of core
(for i 125)
MPP
0.25
Sendust
0.18
2.1 0.26
Coating
(0.16)
coating EPOXY
2.86
0.32
MFP133
Dimensions in mm.
Isolation voltage
GRADE
MPP
Sendust
2013 Jul 31
B (mT) at
H = 100 kA/m;
f = 10 kHz;
T = 25 C
f = 100 kHz;
= 100 mT;
B
20 8 %
60
760
0.023
TX4.7/2.5-M2-A20
42 8 %
125
800
0.023
TX4.7/2.5-M2-A42
AL
(nH)
TYPE NUMBER
T = 25 C
49 8 %
147
800
0.024
TX4.7/2.5-M2-A49
53 8 %
160
800
0.024
TX4.7/2.5-M2-A53
57 8 %
173
800
0.024
TX4.7/2.5-M2-A57
67 8 %
200
800
0.045
TX4.7/2.5-M2-A67
99 8 %
300
800
0.045
TX4.7/2.5-M2-A99
20 15 %
60
1030
0.026
TX4.7/2.5-S7-A20
25 15 %
75
1040
0.026
TX4.7/2.5-S7-A25
30 15 %
90
1050
0.026
TX4.7/2.5-S7-A30
42 15 %
125
1060
0.026
TX4.7/2.5-S7-A42
1070
Ferroxcube
TX6.4/2.8/2.8
6.67 0.32
PARAMETER
VALUE UNIT
(I/A)
2.90
mm1
Ve
effective volume
64.0
mm3
Ie
effective length
13.6
mm
Ae
effective area
4.70
mm2
mass of core
(for i 125)
MPP
0.59
Sendust
0.39
High-Flux 0.55
2.54 0.25
(0.16)
Coating
The cores are coated with epoxy. The colour is black
(Sendust), grey (MPP) or khaki (High-Flux).
Maximum operating temperature is 200 C.
Parylene coating is also available (transparent,
maximum operating temperature 130 C).
coating EPOXY
3.11
0.32
MFP149
Dimensions in mm.
Isolation voltage
GRADE
MPP
Sendust (1)
High-Flux
2013 Jul 31
AL
(nH)
B (mT) at
H = 100 kA/m;
f = 10 kHz; T = 25 C
f = 100 kHz;
= 100 mT; T = 25 C
B
TYPE NUMBER
68%
14
640
0.096
10 8 %
26
700
0.077
TX6.4/2.8-M2-A10
24 8 %
60
760
0.048
TX6.4/2.8-M2-A24
TX6.4/2.8-M2-A6
50 8 %
125
800
0.048
TX6.4/2.8-M2-A50
59 8 %
147
800
0.051
TX6.4/2.8-M2-A59
64 8 %
160
800
0.051
TX6.4/2.8-M2-A64
69 8 %
173
800
0.051
TX6.4/2.8-M2-A69
80 8 %
200
800
0.096
TX6.4/2.8-M2-A80
120 8 %
300
800
0.096
TX6.4/2.8-M2-A120
24 12 %
60
1030
0.055
TX6.4/2.8-S7-A24MC
30 12 %
75
1040
0.055
TX6.4/2.8-S7-A30MC
36 12 %
90
1050
0.055
TX6.4/2.8-S7-A36MC
50 12 %
125
1060
0.055
TX6.4/2.8-S7-A50MC
68%
14
890
0.160
TX6.4/2.8-H2-A6
10 8 %
26
980
0.128
TX6.4/2.8-H2-A10
24 8 %
60
1280
0.115
TX6.4/2.8-H2-A24
50 8 %
125
1370
0.128
TX6.4/2.8-H2-A50
59 8 %
147
1385
0.141
TX6.4/2.8-H2-A59
64 8 %
160
1400
0.224
TX6.4/2.8-H2-A64
1071
Ferroxcube
TX6.6/2.7/2.5
6.92 0.32
PARAMETER
VALUE UNIT
mm1
(I/A)
2.86
Ve
effective volume
64.9
mm3
Ie
effective length
13.6
mm
Ae
effective area
4.76
mm2
mass of core
(for i 125)
MPP
0.58
Sendust
0.40
High-Flux 0.55
2.41 0.26
(0.16)
Coating
The cores are coated with epoxy. The colour is cream
(Sendust), grey (MPP) or khaki (High-Flux).
Maximum operating temperature is 200 C.
Parylene coating is also available (transparent,
maximum operating temperature 130 C).
coating EPOXY
2.86
0.32
MFP150
Dimensions in mm.
Isolation voltage
AC isolation voltage : 1000 V (Parylene : 750 V).
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
GRADE
MPP
Sendust
High-Flux
2013 Jul 31
AL
(nH)
B (mT) at
H = 100 kA/m;
f = 10 kHz; T = 25 C
f = 100 kHz;
= 100 mT; T = 25 C
B
TYPE NUMBER
68%
14
640
0.097
TX6.6/2.5-M2-A6
11 8 %
26
700
0.078
TX6.6/2.5-M2-A11
26 8 %
60
760
0.049
TX6.6/2.5-M2-A26
54 8 %
125
800
0.049
TX6.6/2.5-M2-A54
64 8 %
147
800
0.052
TX6.6/2.5-M2-A64
69 8 %
160
800
0.052
TX6.6/2.5-M2-A69
75 8 %
173
800
0.052
TX6.6/2.5-M2-A75
86 8 %
200
800
0.097
TX6.6/2.5-M2-A86
130 8 %
300
800
0.097
TX6.6/2.5-M2-A130
26 12 %
60
1030
0.055
TX6.6/2.5-S7-A26
32 12 %
75
1040
0.055
TX6.6/2.5-S7-A32
39 12 %
90
1050
0.055
TX6.6/2.5-S7-A39
54 12 %
125
1060
0.055
TX6.6/2.5-S7-A54
68%
14
890
0.162
TX6.6/2.5-H2-A6
11 8 %
26
980
0.130
TX6.6/2.5-H2-A11
26 8 %
60
1280
0.117
TX6.6/2.5-H2-A26
54 8 %
125
1370
0.130
TX6.6/2.5-H2-A54
64 8 %
147
1385
0.143
TX6.6/2.5-H2-A64
69 8 %
160
1400
0.227
TX6.6/2.5-H2-A69
1072
Ferroxcube
TX6.6/2.7/4.8
6.92 0.32
PARAMETER
VALUE UNIT
(I/A)
1.48
mm1
Ve
effective volume
125
mm3
Ie
effective length
13.6
mm
Ae
effective area
9.2
mm2
mass of core
(for i 125)
MPP
1.09
Sendust
0.77
High-Flux 1.03
2.41 0.26
(0.16)
Coating
The cores are coated with epoxy. The colour is cream
(Sendust), grey (MPP) or khaki (High-Flux).
Maximum operating temperature is 200 C.
Parylene coating is also available (transparent,
maximum operating temperature 130 C).
coating EPOXY
5.1
0.32
MFP151
Dimensions in mm.
Isolation voltage
AC isolation voltage : 1000 V (Parylene : 750 V).
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
GRADE
MPP
Sendust
High-Flux
2013 Jul 31
AL
(nH)
B (mT) at
H = 100 kA/m;
f = 10 kHz; T = 25 C
f = 100 kHz;
= 100 mT; T = 25 C
B
TYPE NUMBER
14 8 %
14
640
0.188
TX6.6/4.8-M2-A14
21 8 %
26
700
0.150
TX6.6/4.8-M2-A21
50 8 %
60
760
0.094
TX6.6/4.8-M2-A50
103 8 %
125
800
0.094
TX6.6/4.8-M2-A103
122 8 %
147
800
0.100
TX6.6/4.8-M2-A122
132 8 %
160
800
0.100
TX6.6/4.8-M2-A132
144 8 %
173
800
0.100
TX6.6/4.8-M2-A144
165 8 %
200
800
0.188
TX6.6/4.8-M2-A165
247 8 %
300
800
0.188
TX6.6/4.8-M2-A247
50 12 %
60
1030
0.107
TX6.6/4.8-S7-A50
62 12 %
75
1040
0.107
TX6.6/4.8-S7-A62
74 12 %
90
1050
0.107
TX6.6/4.8-S7-A74
103 12 %
125
1060
0.107
TX6.6/4.8-S7-A103
12 8 %
14
890
0.314
TX6.6/4.8-H2-A12
21 8 %
26
980
0.251
TX6.6/4.8-H2-A21
50 8 %
60
1280
0.226
TX6.6/4.8-H2-A50
103 8 %
125
1370
0.251
TX6.6/4.8-H2-A103
122 8 %
147
1385
0.276
TX6.6/4.8-H2-A122
132 8 %
160
1400
0.439
TX6.6/4.8-H2-A132
1073
Ferroxcube
TX6.9/4/5.1
7.18 0.32
PARAMETER
VALUE UNIT
(I/A)
2.28
mm1
Ve
effective volume
120
mm3
Ie
effective length
16.5
mm
Ae
effective area
7.25
mm2
mass of core
(for i 125)
MPP
1.00
Sendust
0.74
High-Flux 0.94
3.7 0.26
(0.16)
Coating
The cores are coated with epoxy. The colour is cream
(Sendust), grey (MPP) or khaki (High-Flux).
Maximum operating temperature is 200 C.
Parylene coating is also available (transparent,
maximum operating temperature 130 C).
coating EPOXY
5.4
0.32
MFP152
Dimensions in mm.
Isolation voltage
AC isolation voltage : 1000 V (Parylene : 750 V).
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
GRADE
MPP
Sendust
High-Flux
2013 Jul 31
AL
(nH)
B (mT) at
H = 100 kA/m;
f = 10 kHz; T = 25 C
f = 100 kHz;
= 100 mT; T = 25 C
B
TYPE NUMBER
88%
14
640
0.179
14 8 %
26
700
0.144
TX6.9/5.1-M2-A14
33 8 %
60
760
0.090
TX6.9/5.1-M2-A33
TX6.9/5.1-M2-A8
70 8 %
125
800
0.090
TX6.9/5.1-M2-A70
81 8 %
147
800
0.096
TX6.9/5.1-M2-A81
89 8 %
160
800
0.096
TX6.9/5.1-M2-A89
95 8 %
173
800
0.096
TX6.9/5.1-M2-A95
112 8 %
200
800
0.179
TX6.9/5.1-M2-A112
166 8 %
300
800
0.179
TX6.9/5.1-M2-A166
33 12 %
60
1030
0.102
TX6.9/5.1-S7-A33
42 12 %
75
1040
0.102
TX6.9/5.1-S7-A42
50 12 %
90
1050
0.102
TX6.9/5.1-S7-A50
70 12 %
125
1060
0.102
TX6.9/5.1-S7-A70
88%
14
890
0.299
TX6.9/5.1-H2-A8
14 8 %
26
980
0.239
TX6.9/5.1-H2-A14
33 8 %
60
1280
0.215
TX6.9/5.1-H2-A33
70 8 %
125
1370
0.239
TX6.9/5.1-H2-A70
81 8 %
147
1385
0.263
TX6.9/5.1-H2-A81
89 8 %
160
1400
0.419
TX6.9/5.1-H2-A89
1074
Ferroxcube
TX7.9/4/3.2
8.19 0.32
PARAMETER
VALUE UNIT
(I/A)
2.91
mm1
Ve
effective volume
110
mm3
Ie
effective length
17.9
mm
Ae
effective area
6.15
mm2
mass of core
(for i 125)
MPP
0.92
Sendust
0.68
High-Flux 0.87
3.7 0.26
(0.16)
Coating
The cores are coated with epoxy. The colour is black
(Sendust), grey (MPP) or khaki (High-Flux).
Maximum operating temperature is 200 C.
Parylene coating is also available (transparent,
maximum operating temperature 130 C).
coating EPOXY
3.5
0.32
MFP153
Dimensions in mm.
Isolation voltage
GRADE
MPP
Sendust (1)
High-Flux
2013 Jul 31
AL
(nH)
B (mT) at
H = 100 kA/m;
f = 10 kHz; T = 25 C
f = 100 kHz;
= 100 mT; T = 25 C
B
TYPE NUMBER
68%
14
640
0.165
TX7.9/3.2-M2-A6
11 8 %
26
700
0.132
TX7.9/3.2-M2-A11
25 8 %
60
760
0.082
TX7.9/3.2-M2-A25
52 8 %
125
800
0.082
TX7.9/3.2-M2-A52
62 8 %
147
800
0.088
TX7.9/3.2-M2-A62
66 8 %
160
800
0.088
TX7.9/3.2-M2-A66
73 8 %
173
800
0.088
TX7.9/3.2-M2-A73
83 8 %
200
800
0.165
TX7.9/3.2-M2-A83
124 8 %
300
800
0.165
TX7.9/3.2-M2-A124
25 12 %
60
1030
0.094
TX7.9/3.2-S7-A25-MC
31 12 %
75
1040
0.094
TX7.9/3.2-S7-A31-MC
37 12 %
90
1050
0.094
TX7.9/3.2-S7-A37-MC
52 12 %
125
1060
0.094
TX7.9/3.2-S7-A52-MC
68%
14
890
0.275
TX7.9/3.2-H2-A6
11 8 %
26
980
0.220
TX7.9/3.2-H2-A11
25 8 %
60
1280
0.198
TX7.9/3.2-H2-A25
52 8 %
125
1370
0.220
TX7.9/3.2-H2-A52
62 8 %
147
1385
0.242
TX7.9/3.2-H2-A62
66 8 %
160
1400
1075
0.385
TX7.9/3.2-H2-A66
Ferroxcube
TX9.7/4.8/3.2
9.97 0.32
PARAMETER
VALUE UNIT
(I/A)
2.90
mm1
Ve
effective volume
164
mm3
Ie
effective length
21.8
mm
Ae
effective area
7.52
mm2
mass of core
(for i 125)
MPP
1.40
Sendust
1.01
High-Flux 1.30
4.52 0.26
(0.16)
Coating
The cores are coated with epoxy. The colour is black
(Sendust), grey (MPP) or khaki (High-Flux).
Maximum operating temperature is 200 C.
Parylene coating is also available (transparent,
maximum operating temperature 130 C).
coating EPOXY
3.5
0.32
MFP154
Dimensions in mm.
Isolation voltage
GRADE
MPP
Sendust (1)
High-Flux
2013 Jul 31
B (mT) at
H = 100 kA/m;
f = 10 kHz; T = 25 C
f = 100 kHz;
= 100 mT; T = 25 C
B
14
640
0.246
TX9.7/3.2-M2-A6
26
700
0.197
TX9.7/3.2-M2-A11
25 8 %
60
760
0.123
TX9.7/3.2-M2-A25
53 8 %
125
800
0.123
TX9.7/3.2-M2-A53
AL
(nH)
68%
11 8 %
TYPE NUMBER
63 8 %
147
800
0.131
TX9.7/3.2-M2-A63
68 8 %
160
800
0.131
TX9.7/3.2-M2-A68
74 8 %
173
800
0.131
TX9.7/3.2-M2-A74
84 8 %
200
800
0.246
TX9.7/3.2-M2-A84
128 8 %
300
800
0.246
TX9.7/3.2-M2-A128
25 12 %
60
1030
0.140
TX9.7/3.2-S7-A25-MC
32 12 %
75
1040
0.140
TX9.7/3.2-S7-A32-MC
38 12 %
90
1050
0.140
TX9.7/3.2-S7-A38-MC
53 12 %
125
1060
0.140
TX9.7/3.2-S7-A53-MC
68%
14
890
0.410
TX9.7/3.2-H2-A6
11 8 %
26
980
0.328
TX9.7/3.2-H2-A11
25 8 %
60
1280
0.295
TX9.7/3.2-H2-A25
53 8 %
125
1370
0.328
TX9.7/3.2-H2-A53
63 8 %
147
1385
0.361
TX9.7/3.2-H2-A63
68 8 %
160
1400
1076
0.574
TX9.7/3.2-H2-A68
Ferroxcube
TX9.7/4.8/4
9.97 0.32
PARAMETER
VALUE UNIT
(I/A)
2.31
mm1
Ve
effective volume
206
mm3
Ie
effective length
21.8
mm
Ae
effective area
9.45
mm2
mass of core
(for i 125)
MPP
1.80
Sendust
1.44
High-Flux 1.70
4.52 0.26
(0.16)
Coating
The cores are coated with epoxy. The colour is cream
(Sendust), grey (MPP) or khaki (High-Flux).
Maximum operating temperature is 200 C.
Parylene coating is also available (transparent,
maximum operating temperature 130 C).
coating EPOXY
4.28
0.32
MFP155
Dimensions in mm.
Isolation voltage
AC isolation voltage : 1000 V (Parylene : 750 V).
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
GRADE
MPP
Sendust
High-Flux
2013 Jul 31
AL
(nH)
B (mT) at
H = 100 kA/m;
f = 10 kHz; T = 25 C
f = 100 kHz;
= 100 mT;T = 25 C
B
TYPE NUMBER
78%
14
640
0.309
TX9.7/4-M2-A7
14 8 %
26
700
0.247
TX9.7/4-M2-A14
32 8 %
60
760
0.155
TX9.7/4-M2-A32
66 8 %
125
800
0.155
TX9.7/4-M2-A66
78 8 %
147
800
0.165
TX9.7/4-M2-A78
84 8 %
160
800
0.165
TX9.7/4-M2-A84
TX9.7/4-M2-A92
92 8 %
173
800
0.165
105 8 %
200
800
0.309
TX9.7/4-M2-A105
159 8 %
300
800
0.309
TX9.7/4-M2-A159
32 12 %
60
1030
0.176
TX9.7/4-S7-A32
40 12 %
75
1040
0.176
TX9.7/4-S7-A40
48 12 %
90
1050
0.176
TX9.7/4-S7-A48
66 12 %
125
1060
0.176
TX9.7/4-S7-A66
78%
14
890
0.515
TX9.7/4-H2-A7
14 8 %
26
980
0.412
TX9.7/4-H2-A14
32 8 %
60
1280
0.371
TX9.7/4-H2-A32
66 8 %
125
1370
0.412
TX9.7/4-H2-A66
78 8 %
147
1385
0.451
TX9.7/4-H2-A78
84 8 %
160
1400
0.721
TX9.7/4-H2-A84
1077
Ferroxcube
TX10/5.1/4
10.5 0.3
PARAMETER
VALUE UNIT
(I/A)
2.38
mm1
Ve
effective volume
238
mm3
Ie
effective length
23.8
mm
Ae
effective area
10.0
mm2
mass of core
(for i 125)
MPP
1.91
Sendust
1.46
High-Flux 1.80
4.82 0.26
(0.16)
Coating
The cores are coated with epoxy. The colour is black
(Sendust), grey (MPP) or khaki (High-Flux).
Maximum operating temperature is 200 C.
Parylene coating is also available (transparent,
maximum operating temperature 130 C).
coating EPOXY
4.28
0.32
MFP156
Dimensions in mm.
Isolation voltage
GRADE
MPP
Sendust (1)
High-Flux
2013 Jul 31
AL
(nH)
B (mT) at
H = 100 kA/m;
f = 10 kHz; T = 25 C
f = 100 kHz;
= 100 mT; T = 25 C
B
TYPE NUMBER
78%
14
640
0.357
TX10/4-M2-A7
14 8 %
26
700
0.286
TX10/4-M2-A14
32 8 %
60
760
0.179
TX10/4-M2-A32
66 8 %
125
800
0.179
TX10/4-M2-A66
78 8 %
147
800
0.190
TX10/4-M2-A78
84 8 %
160
800
0.190
TX10/4-M2-A84
TX10/4-M2-A92
92 8 %
173
800
0.190
105 8 %
200
800
0.357
TX10/4-M2-A105
159 8 %
300
800
0.357
TX10/4-M2-A159
32 12 %
60
1030
0.203
TX10/4-S7-A32-MC
40 12 %
75
1040
0.203
TX10/4-S7-A40-MC
48 12 %
90
1050
0.203
TX10/4-S7-A48-MC
66 12 %
125
1060
0.203
TX10/4-S7-A66-MC
78%
14
890
0.595
TX10/4-H2-A7
14 8 %
26
980
0.476
TX10/4-H2-A14
32 8 %
60
1280
0.428
TX10/4-H2-A32
66 8 %
125
1370
0.476
TX10/4-H2-A66
78 8 %
147
1385
0.524
TX10/4-H2-A78
84 8 %
160
1400
1078
0.833
TX10/4-H2-A84
Ferroxcube
TX11/6.4/4
11.51 0.31
PARAMETER
VALUE UNIT
(I/A)
2.97
mm1
Ve
effective volume
244
mm3
Ie
effective length
26.9
mm
Ae
effective area
9.06
mm2
mass of core
(for i 125)
MPP
2.12
Sendust
1.50
High-Flux 1.99
6.09 0.26
(0.16)
Coating
The cores are coated with epoxy. The colour is black
(Sendust), grey (MPP) or khaki (High-Flux).
Maximum operating temperature is 200 C.
Parylene coating is also available (transparent,
maximum operating temperature 130 C).
coating EPOXY
4.28
0.32
MFP157
Dimensions in mm.
Isolation voltage
GRADE
MPP
Sendust (1)
High-Flux
2013 Jul 31
AL
(nH)
B (mT) at
H = 100 kA/m;
f = 10 kHz; T = 25 C
f = 100 kHz;
= 100 mT; T = 25 C
B
TYPE NUMBER
68%
14
640
0.366
TX11/4-M2-A6
11 8 %
26
700
0.292
TX11/4-M2-A11
26 8 %
60
760
0.183
TX11/4-M2-A26
53 8 %
125
800
0.183
TX11/4-M2-A53
63 8 %
147
800
0.195
TX11/4-M2-A63
68 8 %
160
800
0.195
TX11/4-M2-A68
74 8 %
173
800
0.195
TX11/4-M2-A74
85 8 %
200
800
0.366
TX11/4-M2-A85
127 8 %
300
800
0.366
TX11/4-M2-A127
26 12 %
60
1030
0.208
TX11/4-S7-A26-MC
32 12 %
75
1040
0.208
TX11/4-S7-A32-MC
38 12 %
90
1050
0.208
TX11/4-S7-A38-MC
53 12 %
125
1060
0.208
TX11/4-S7-A53-MC
68%
14
890
0.609
TX11/4-H2-A6
11 8 %
26
980
0.487
TX11/4-H2-A11
26 8 %
60
1280
0.439
TX11/4-H2-A26
53 8 %
125
1370
0.487
TX11/4-H2-A53
63 8 %
147
1385
0.536
TX11/4-H2-A63
68 8 %
160
1400
1079
0.853
TX11/4-H2-A68
Ferroxcube
TX13/7.6/4.8
13.08 0.38
PARAMETER
VALUE UNIT
(I/A)
2.74
mm1
Ve
effective volume
356
mm3
Ie
effective length
31.2
mm
Ae
effective area
11.4
mm2
mass of core
(for i 125)
MPP
3.07
Sendust
2.20
High-Flux 2.90
7.3 0.32
(0.19)
Coating
The cores are coated with epoxy. The colour is black
(Sendust), grey (MPP) or khaki (High-Flux).
Maximum operating temperature is 200 C.
Parylene coating is also available (transparent,
maximum operating temperature 130 C).
coating EPOXY
5.13
0.38
MFP158
Dimensions in mm.
Isolation voltage
Sendust (1)
High-Flux
2013 Jul 31
AL
(nH)
B (mT) at
H = 100 kA/m;
f = 10 kHz; T = 25 C
f = 100 kHz;
= 100 mT; T = 25 C
B
TYPE NUMBER
6.4 8 %
14
640
0.534
TX13/4.8-M2-A6.4
12 8 %
26
700
0.427
TX13/4.8-M2-A12
27 8 %
60
760
0.267
TX13/4.8-M2-A27
56 8 %
125
800
0.267
TX13/4.8-M2-A56
67 8 %
147
800
0.285
TX13/4.8-M2-A67
72 8 %
160
800
0.285
TX13/4.8-M2-A72
79 8 %
173
800
0.285
TX13/4.8-M2-A79
90 8 %
200
800
0.534
TX13/4.8-M2-A90
134 8 %
300
800
0.534
TX13/4.8-M2-A134
27 8 %
60
1030
0.304
TX13/4.8-S7-A27-MC
34 8 %
75
1040
0.304
TX13/4.8-S7-A34-MC
40 8 %
90
1050
0.304
TX13/4.8-S7-A40-MC
56 8 %
125
1060
0.304
TX13/4.8-S7-A56-MC
6.4 8 %
14
890
0.890
TX13/4.8-H2-A6.4
12 8 %
26
980
0.712
TX13/4.8-H2-A12
27 8 %
60
1280
0.641
TX13/4.8-H2-A27
56 8 %
125
1370
0.712
TX13/4.8-H2-A56
67 8 %
147
1385
0.783
TX13/4.8-H2-A67
72 8 %
160
1400
1080
1.25
TX13/4.8-H2-A72
Ferroxcube
TX16/10/6.4
16.89 0.39
PARAMETER
VALUE UNIT
(I/A)
2.14
mm1
Ve
effective volume
789
mm3
Ie
effective length
41.1
mm
Ae
effective area
19.2
mm2
mass of core
(for i 125)
MPP
6.78
Sendust
4.98
High-Flux 6.34
9.86 0.34
(0.19)
Coating
coating EPOXY
6.73
0.38
MFP159
Isolation voltage
Dimensions in mm.
GRADE
MPP
Sendust (1)
High-Flux
2013 Jul 31
AL
(nH)
B (mT) at
H = 100 kA/m;
f = 10 kHz; T = 25 C
f = 100 kHz;
= 100 mT; T = 25 C
B
TYPE NUMBER
88%
14
640
1.18
TX16/6.4-M2-A8
15 8 %
26
700
0.947
TX16/6.4-M2-A15
35 8 %
60
760
0.592
TX16/6.4-M2-A35
72 8 %
125
800
0.592
TX16/6.4-M2-A72
88 8 %
147
800
0.631
TX16/6.4-M2-A88
92 8 %
160
800
0.631
TX16/6.4-M2-A92
104 8 %
173
800
0.631
TX16/6.4-M2-A104
115 8 %
200
800
1.18
TX16/6.4-M2-A115
173 8 %
300
800
1.18
35 8 %
60
1030
0.675
TX16/6.4-S7-A35-MC
43 8 %
75
1040
0.675
TX16/6.4-S7-A43-MC
52 8 %
90
1050
0.675
TX16/6.4-S7-A52-MC
72 8 %
125
1060
0.675
TX16/6.4-S7-A72-MC
88%
14
890
1.97
15 8 %
26
980
1.58
TX16/6.4-H2-A15
35 8 %
60
1280
1.42
TX16/6.4-H2-A35
72 8 %
125
1370
1.58
TX16/6.4-H2-A72
88 8 %
147
1385
1.74
TX16/6.4-H2-A88
92 8 %
160
1400
2.76
TX16/6.4-H2-A92
1081
TX16/6.4-M2-A173
TX16/6.4-H2-A8
Ferroxcube
TX17/9.7/6.4
17.67 0.37
PARAMETER
VALUE UNIT
(I/A)
1.78
mm1
Ve
effective volume
960
mm3
Ie
effective length
41.4
mm
Ae
effective area
23.2
mm2
mass of core
(for i 125)
MPP
8.16
Sendust
5.90
High-Flux 7.70
9.33 0.32
(0.19)
Coating
coating EPOXY
6.73
0.38
MFP160
Isolation voltage
Dimensions in mm.
GRADE
MPP
Sendust
High-Flux
2013 Jul 31
AL
(nH)
B (mT) at
H = 100 kA/m;
f = 10 kHz;
T = 25 C
f = 100 kHz;
= 100 mT;
B
T = 25 C
TYPE NUMBER
10 8 %
14
640
1.44
TX17/6.4-M2-A10
19 8 %
26
700
1.15
TX17/6.4-M2-A19
43 8 %
60
760
0.720
TX17/6.4-M2-A43
89 8 %
125
800
0.720
TX17/6.4-M2-A89
105 8 %
147
800
0.768
TX17/6.4-M2-A105
114 8 %
160
800
0.768
TX17/6.4-M2-A114
123 8 %
173
800
0.768
TX17/6.4-M2-A123
142 8 %
200
800
1.44
TX17/6.4-M2-A142
214 8 %
300
800
1.44
TX17/6.4-M2-A214
43 8 %
60
1030
0.821
TX17/6.4-S7-A43
53 8 %
75
1040
0.821
TX17/6.4-S7-A53
64 8 %
90
1050
0.821
TX17/6.4-S7-A64
89 8 %
125
1060
0.821
TX17/6.4-S7-A89
10 8 %
14
890
2.40
TX17/6.4-H2-A10
19 8 %
26
980
1.92
TX17/6.4-H2-A19
43 8 %
60
1280
1.73
TX17/6.4-H2-A43
89 8 %
125
1370
1.92
TX17/6.4-H2-A89
105 8 %
147
1385
2.11
TX17/6.4-H2-A105
114 8 %
160
1400
3.36
TX17/6.4-H2-A114
1082
Ferroxcube
TX20/13/6.4
20.7 0.4
PARAMETER
VALUE UNIT
mm1
(I/A)
Ve
effective volume
1150
mm3
Ie
effective length
50.9
mm
Ae
effective area
22.6
mm2
mass of core
(for i 125)
2.25
MPP
9.40
Sendust
7.10
High-Flux 8.90
12.38 0.32
(0.19)
Coating
coating EPOXY
6.73
0.38
MFP161
Isolation voltage
Dimensions in mm.
GRADE
MPP
Sendust (1)
High-Flux
2013 Jul 31
B (mT) at
H = 100 kA/m;
f = 10 kHz;
T = 25 C
f = 100 kHz;
= 100 mT;
B
7.8 8 %
14
640
1.73
TX20/6.4-M2-A7.8
14 8 %
26
700
1.38
TX20/6.4-M2-A14
32 8 %
60
760
0.863
TX20/6.4-M2-A32
68 8 %
125
800
0.863
TX20/6.4-M2-A68
81 8 %
147
800
0.920
TX20/6.4-M2-A81
87 8 %
160
800
0.920
TX20/6.4-M2-A87
109 8 %
200
800
1.73
TX20/6.4-M2-A109
163 8 %
300
800
1.73
TX20/6.4-M2-A163
32 8 %
60
1030
0.983
TX20/6.4-S7-A32-MC
41 8 %
75
1040
0.983
TX20/6.4-S7-A41-MC
49 8 %
90
1050
0.983
TX20/6.4-S7-A49-MC
68 8 %
125
1060
0.983
TX20/6.4-S7-A68-MC
7.8 8 %
14
890
2.88
TX20/6.4-H2-A7.8
14 8 %
26
980
2.30
TX20/6.4-H2-A14
32 8 %
60
1280
2.07
TX20/6.4-H2-A32
68 8 %
125
1370
2.30
TX20/6.4-H2-A68
81 8 %
147
1385
2.53
TX20/6.4-H2-A81
87 8 %
160
1400
4.03
TX20/6.4-H2-A87
AL
(nH)
1083
TYPE NUMBER
T = 25 C
Ferroxcube
TX23/14/7.6
23.25 0.35
PARAMETER
VALUE UNIT
(I/A)
1.71
mm1
Ve
effective volume
1880
mm3
Ie
effective length
56.7
mm
Ae
effective area
33.1
mm2
mass of core
(for i 125)
MPP
15.9
Sendust
11.5
High-Flux 15.0
13.67 0.33
(0.19)
Coating
coating EPOXY
8
0.38
MFP162
Isolation voltage
Dimensions in mm.
GRADE
MPP
Sendust (1)
High-Flux
2013 Jul 31
B (mT) at
H = 100 kA/m;
f = 10 kHz; T = 25 C
f = 100 kHz;
= 100 mT; T = 25 C
B
14
640
2.82
TX23/7.6-M2-A9.9
26
700
2.26
TX23/7.6-M2-A19
43 8 %
60
760
1.41
TX23/7.6-M2-A43
90 8 %
125
800
1.41
TX23/7.6-M2-A90
106 8 %
147
800
1.50
TX23/7.6-M2-A106
115 8 %
160
800
1.50
TX23/7.6-M2-A115
124 8 %
173
800
1.50
TX23/7.6-M2-A124
144 8 %
200
800
2.82
TX23/7.6-M2-A144
216 8 %
300
800
2.82
TX23/7.6-M2-A216
19 8 %
26
1000
3.01
TX23/7.6-S7-A19-MC
AL
(nH)
9.9 8 %
19 8 %
TYPE NUMBER
43 8 %
60
1030
1.61
TX23/7.6-S7-A43-MC
54 8 %
75
1040
1.61
TX23/7.6-S7-A54-MC
65 8 %
90
1050
1.61
TX23/7.6-S7-A65-MC
90 8 %
125
1060
1.61
TX23/7.6-S7-A90-MC
9.9 8 %
14
890
4.70
TX23/7.6-H2-A9.9
19 8 %
26
980
3.76
TX23/7.6-H2-A19
43 8 %
60
1280
3.38
TX23/7.6-H2-A43
90 8 %
125
1370
3.76
TX23/7.6-H2-A90
106 8 %
147
1385
4.14
TX23/7.6-H2-A106
115 8 %
160
1400
6.58
TX23/7.6-H2-A115
1084
Ferroxcube
TX24/14/8.9
23.95 0.35
PARAMETER
VALUE UNIT
(I/A)
1.52
mm1
Ve
effective volume
2280
mm3
Ie
effective length
58.8
mm
Ae
effective area
38.8
mm2
mass of core
(for i 125)
MPP
19.9
Sendust
14.0
High-Flux 18.8
14.08 0.32
(0.19)
Coating
coating EPOXY
9.27
0.38
MFP163
Isolation voltage
Dimensions in mm.
GRADE
MPP
Sendust
High-Flux
2013 Jul 31
B (mT) at
AL
(nH)
H = 100 kA/m;
f = 10 kHz;
T = 25 C
f = 100 kHz;
= 100 mT;
B
T = 25 C
12 8 %
14
640
3.42
TX24/8.9-M2-A12
22 8 %
26
700
2.74
TX24/8.9-M2-A22
51 8 %
60
760
1.71
TX24/8.9-M2-A51
105 8 %
125
800
1.71
TX24/8.9-M2-A105
TYPE NUMBER
124 8 %
147
800
1.82
TX24/8.9-M2-A124
135 8 %
160
800
1.82
TX24/8.9-M2-A135
146 8 %
173
800
1.82
TX24/8.9-M2-A146
169 8 %
200
800
3.42
TX24/8.9-M2-A169
253 8 %
300
800
3.42
TX24/8.9-M2-A253
22 8 %
26
1000
3.65
TX24/8.9-S7-A22
51 8 %
60
1030
1.95
TX24/8.9-S7-A51
105 8 %
125
1060
1.95
TX24/8.9-S7-A105
12 8 %
14
890
5.70
TX24/8.9-H2-A12
22 8 %
26
980
4.56
TX24/8.9-H2-A22
51 8 %
60
1280
4.10
TX24/8.9-H2-A51
105 8 %
125
1370
4.56
TX24/8.9-H2-A105
124 8 %
147
1385
5.02
TX24/8.9-H2-A124
135 8 %
160
1400
7.98
TX24/8.9-H2-A135
1085
Ferroxcube
TX27/15/11
27.3 0.4
PARAMETER
VALUE UNIT
mm1
(I/A)
0.971
Ve
effective volume
4150
mm3
Ie
effective length
63.5
mm
Ae
effective area
65.4
mm2
mass of core
(for i 125)
MPP
35.8
Sendust
25.5
High-Flux 33.8
14.4 0.3
(0.19)
Coating
coating EPOXY
11.57
0.37
MFP164
Isolation voltage
Dimensions in mm.
GRADE
MPP
Sendust (1)
High-Flux
2013 Jul 31
B (mT) at
H = 100 kA/m;
f = 10 kHz; T = 25 C
f = 100 kHz;
= 100 mT; T = 25 C
B
14
640
6.23
TX27/11-M2-A18
32 8 %
26
700
4.98
TX27/11-M2-A32
75 8 %
60
760
3.11
TX27/11-M2-A75
157 8 %
125
800
3.11
TX27/11-M2-A157
AL
(nH)
18 8 %
TYPE NUMBER
185 8 %
147
800
3.32
TX27/11-M2-A185
201 8 %
160
800
3.32
TX27/11-M2-A201
217 8 %
173
800
3.32
TX27/11-M2-A217
251 8 %
200
800
6.22
TX27/11-M2-A251
377 8 %
300
800
6.22
TX27/11-M2-A377
32 8 %
26
1000
6.64
TX27/11-S7-A32-MC
75 8 %
60
1030
3.55
TX27/11-S7-A75-MC
94 8 %
75
1040
3.55
TX27/11-S7-A94-MC
113 8 %
90
1050
3.55
TX27/11-S7-A113-MC
157 8 %
125
1060
3.55
TX27/11-S7-A157-MC
18 8 %
14
890
10.4
TX27/11-H2-A18
32 8 %
26
980
8.30
TX27/11-H2-A32
75 8 %
60
1280
7.47
TX27/11-H2-A75
157 8 %
125
1370
8.30
TX27/11-H2-A157
185 8 %
147
1385
9.13
TX27/11-H2-A185
201 8 %
160
1400
14.5
TX27/11-H2-A201
1086
Ferroxcube
TX33/20/11
33.15 0.4
PARAMETER
VALUE UNIT
mm1
(I/A)
1.21
Ve
effective volume
5480
mm3
Ie
effective length
81.5
mm
Ae
effective area
67.2
mm2
mass of core
(for i 125)
MPP
46.9
Sendust
33.7
High-Flux 44.2
19.75 0.3
(0.19)
Coating
coating EPOXY
11.07
0.37
MFP165
Isolation voltage
Dimensions in mm.
GRADE
MPP
Sendust (1)
High-Flux
2013 Jul 31
AL
(nH)
B (mT) at
H = 100 kA/m;
f = 10 kHz; T = 25 C
f = 100 kHz;
= 100 mT; T = 25 C
B
TYPE NUMBER
14 8 %
14
640
8.22
TX33/11-M2-A14
28 8 %
26
700
6.58
TX33/11-M2-A28
61 8 %
60
760
4.11
TX33/11-M2-A61
127 8 %
125
800
4.11
TX33/11-M2-A127
150 8 %
147
800
4.38
TX33/11-M2-A150
163 8 %
160
800
4.38
TX33/11-M2-A163
176 8 %
173
800
4.38
TX33/11-M2-A176
203 8 %
200
800
8.22
TX33/11-M2-A203
305 8 %
300
800
8.22
TX33/11-M2-A305
28 8 %
26
1000
8.77
TX33/11-S7-A28-MC
61 8 %
60
1030
4.69
TX33/11-S7-A61-MC
76 8 %
75
1040
4.69
TX33/11-S7-A76-MC
TX33/11-S7-A91-MC
91 8 %
90
1050
4.69
127 8 %
125
1060
4.69
TX33/11-S7-A127-MC
14 8 %
14
890
13.7
TX33/11-H2-A14
TX33/11-H2-A28
28 8 %
26
980
11.0
61 8 %
60
1280
9.86
TX33/11-H2-A61
127 8 %
125
1370
11.0
TX33/11-H2-A127
150 8 %
147
1385
12.1
TX33/11-H2-A150
163 8 %
160
1400
19.2
TX33/11-H2-A163
1087
Ferroxcube
TX34/23/8.9
34.75 0.45
PARAMETER
VALUE UNIT
(I/A)
1.97
mm1
Ve
effective volume
4060
mm3
Ie
effective length
89.5
mm
Ae
effective area
45.4
mm2
mass of core
(for i 125)
MPP
34.9
Sendust
25.0
High-Flux 32.9
23 0.4
(0.22)
Coating
coating EPOXY
9.34
0.45
MFP166
Isolation voltage
Dimensions in mm.
GRADE
MPP
Sendust
High-Flux
2013 Jul 31
B (mT) at
H = 100 kA/m;
f = 10 kHz; T = 25 C
f = 100 kHz;
= 100 mT; T = 25 C
B
AL
(nH)
98%
14
640
6.09
TX34/8.9-M2-A9
16 8 %
26
700
4.87
TX34/8.9-M2-A16
TX34/8.9-M2-A38
TYPE NUMBER
38 8 %
60
760
3.05
79 8 %
125
800
3.05
TX34/8.9-M2-A79
93 8 %
147
800
3.25
TX34/8.9-M2-A93
101 8 %
160
800
3.25
TX34/8.9-M2-A101
109 8 %
173
800
3.25
TX34/8.9-M2-A109
126 8 %
200
800
6.09
TX34/8.9-M2-A126
190 8 %
300
800
6.09
TX34/8.9-M2-A190
16 8 %
26
1000
6.50
TX34/8.9-S7-A16
38 8 %
60
1030
3.47
TX34/8.9-S7-A38
47 8 %
75
1040
3.47
TX34/8.9-S7-A47
57 8 %
90
1050
3.47
TX34/8.9-S7-A57
79 8 %
125
1060
3.47
TX34/8.9-S7-A79
98%
14
890
10.2
TX34/8.9-H2-A9
16 8 %
26
980
8.12
TX34/8.9-H2-A16
38 8 %
60
1280
7.31
TX34/8.9-H2-A38
79 8 %
125
1370
8.12
TX34/8.9-H2-A79
93 8 %
147
1385
8.93
TX34/8.9-H2-A93
101 8 %
160
1400
14.2
TX34/8.9-H2-A101
1088
Ferroxcube
TX36/22/11
36.25 0.45
PARAMETER
VALUE UNIT
(I/A)
1.32
mm1
Ve
effective volume
6090
mm3
Ie
effective length
89.8
mm
Ae
effective area
67.8
mm2
mass of core
(for i 125)
MPP
51.8
Sendust
37.4
High-Flux 48.9
21.95 0.45
(0.22)
Coating
coating EPOXY
10.93
0.43
MFP167
Isolation voltage
Dimensions in mm.
GRADE
MPP
Sendust (1)
High-Flux
2013 Jul 31
AL
(nH)
13 8 %
14
B (mT) at
H = 100 kA/m;
f = 10 kHz; T = 25 C
f = 100 kHz;
= 100 mT; T = 25 C
B
640
9.13
TYPE NUMBER
TX36/11-M2-A13
24 8 %
26
700
7.31
TX36/11-M2-A24
56 8 %
60
760
4.57
TX36/11-M2-A56
117 8 %
125
800
4.57
TX36/11-M2-A117
138 8 %
147
800
4.87
TX36/11-M2-A138
150 8 %
160
800
4.87
TX36/11-M2-A150
162 8 %
173
800
4.87
TX36/11-M2-A162
187 8 %
200
800
9.13
TX36/11-M2-A187
281 8 %
300
800
9.13
TX36/11-M2-A281
24 8 %
26
1000
9.74
TX36/11-S7-A24-MC
56 8 %
60
1030
5.21
TX36/11-S7-A56-MC
70 8 %
75
1040
5.21
TX36/11-S7-A70-MC
84 8 %
90
1050
5.21
TX36/11-S7-A84-MC
117 8 %
125
1060
5.21
TX36/11-S7-A117-MC
13 8 %
14
890
15.2
TX36/11-H2-A13
24 8 %
26
980
12.2
TX36/11-H2-A24
56 8 %
60
1280
11.0
TX36/11-H2-A56
117 8 %
125
1370
12.2
TX36/11-H2-A117
138 8 %
147
1385
13.4
TX36/11-H2-A138
150 8 %
160
1400
21.3
TX36/11-H2-A150
1089
Ferroxcube
TX40/24/15
40.35 0.45
PARAMETER
VALUE UNIT
mm1
(I/A)
Ve
effective volume
10500
mm3
Ie
effective length
98.4
mm
Ae
effective area
mass of core
(for i 125)
0.920
107
mm2
MPP
91.7
Sendust
64.9
High-Flux 86.5
23.7 0.4
(0.22)
Coating
coating EPOXY
14.94
0.44
MFP168
Isolation voltage
Dimensions in mm.
GRADE
MPP
Sendust (1)
High-Flux
2013 Jul 31
AL
(nH)
B (mT) at
H = 100 kA/m;
f = 10 kHz; T = 25 C
f = 100 kHz;
= 100 mT; T = 25 C
B
TYPE NUMBER
19 8 %
14
640
15.8
TX40/15-M2-A19
35 8 %
26
700
12.6
TX40/15-M2-A35
81 8 %
60
760
7.87
TX40/15-M2-A81
168 8 %
125
800
7.87
TX40/15-M2-A168
198 8 %
147
800
8.40
TX40/15-M2-A198
215 8 %
160
800
8.40
TX40/15-M2-A215
233 8 %
173
800
8.40
TX40/15-M2-A233
269 8 %
200
800
15.8
TX40/15-M2-A269
403 8 %
300
800
15.8
TX40/15-M2-A403
35 8 %
26
1000
16.8
TX40/15-S7-A35-MC
81 8 %
60
1030
8.98
TX40/15-S7-A81-MC
101 8 %
75
1040
8.98
TX40/15-S7-A101-MC
121 8 %
90
1050
8.98
TX40/15-S7-A121-MC
168 8 %
125
1060
8.98
TX40/15-S7-A168-MC
19 8 %
14
890
26.3
TX40/15-H2-A19
35 8 %
26
980
21.0
TX40/15-H2-A35
81 8 %
60
1280
18.9
TX40/15-H2-A81
168 8 %
125
1370
21.0
TX40/15-H2-A168
198 8 %
147
1385
23.1
TX40/15-H2-A198
215 8 %
160
1400
36.8
TX40/15-H2-A215
1090
Ferroxcube
TX47/24/18
47.15 0.45
PARAMETER
VALUE UNIT
(I/A)
0.540
mm1
Ve
effective volume
21300
mm3
Ie
effective length
107
mm
Ae
effective area
199
mm2
mass of core
(for i 125)
MPP
181
Sendust
131
High-Flux 171
23.7 0.4
(0.23)
Coating
coating EPOXY
18.46
0.46
MFP169
Isolation voltage
Dimensions in mm.
GRADE
MPP
Sendust (1)
High-Flux
2013 Jul 31
AL
(nH)
B (mT) at
H = 100 kA/m;
f = 10 kHz;
T = 25 C
f = 100 kHz;
= 100 mT;
B
T = 25 C
TYPE NUMBER
32 8 %
14
640
32.0
TX47/18-M2-A32
59 8 %
26
700
25.6
TX47/18-M2-A59
135 8 %
60
760
16.0
TX47/18-M2-A135
281 8 %
125
800
16.0
TX47/18-M2-A281
330 8 %
147
800
17.0
TX47/18-M2-A330
360 8 %
160
800
17.0
TX47/18-M2-A360
390 8 %
173
800
17.0
TX47/18-M2-A390
450 8 %
200
800
32.0
TX47/18-M2-A450
674 8 %
300
800
32.0
TX47/18-M2-A674
59 8 %
26
1000
34.1
TX47/18-S7-A59-MC
TX47/18-S7-A135-MC
135 8 %
60
1030
18.2
169 8 %
75
1040
18.2
TX47/18-S7-A169-MC
202 8 %
90
1050
18.2
TX47/18-S7-A202-MC
281 8 %
125
1060
18.2
TX47/18-S7-A281-MC
TX47/18-H2-A32
32 8 %
14
890
53.3
59 8 %
26
980
42.6
TX47/18-H2-A59
135 8 %
60
1280
38.3
TX47/18-H2-A135
281 8 %
125
1370
42.6
TX47/18-H2-A281
1091
Ferroxcube
TX47/28/15
47.15 0.45
PARAMETER
VALUE UNIT
(I/A)
0.868
mm1
Ve
effective volume
15600
mm3
Ie
effective length
116
mm
Ae
effective area
134
mm2
mass of core
(for i 125)
MPP
130
Sendust
95.8
High-Flux 123
28.3 0.4
(0.23)
Coating
coating EPOXY
15.67
0.47
MFP170
Isolation voltage
Dimensions in mm.
GRADE
MPP
Sendust (1)
High-Flux
2013 Jul 31
AL
(nH)
B (mT) at
H = 100 kA/m;
f = 10 kHz;
T = 25 C
f = 100 kHz;
= 100 mT;
B
T = 25 C
TYPE NUMBER
20 8 %
14
640
23.4
TX47/15-M2-A20
37 8 %
26
700
18.7
TX47/15-M2-A37
86 8 %
60
760
11.7
TX47/15-M2-A86
178 8 %
125
800
11.7
TX47/15-M2-A178
210 8 %
147
800
12.5
TX47/15-M2-A210
TX47/15-M2-A228
228 8 %
160
800
12.5
246 8 %
173
800
12.5
TX47/15-M2-A248
285 8 %
200
800
23.4
TX47/15-M2-A285
427 8 %
300
800
23.4
TX47/15-M2-A427
37 8 %
26
1000
24.9
TX47/15-S7-A37-MC
86 8 %
60
1030
13.3
TX47/15-S7-A86-MC
107 8 %
75
1040
13.3
TX47/15-S7-A107-MC
128 8 %
90
1050
13.3
TX47/15-S7-A128-MC
178 8 %
125
1060
13.3
TX47/15-S7-A178-MC
20 8 %
14
890
39.0
TX47/15-H2-A20
37 8 %
26
980
31.2
TX47/15-H2-A37
86 8 %
60
1280
28.0
TX47/15-H2-A86
178 8 %
125
1370
31.2
TX47/15-H2-A178
1092
Ferroxcube
TX51/32/14
51.25 0.45
PARAMETER
VALUE UNIT
(I/A)
1.02
mm1
Ve
effective volume
15900
mm3
Ie
effective length
127
mm
Ae
effective area
125
mm2
mass of core
(for i 125)
MPP
141
Sendust
98.1
High-Flux 133
31.35 0.45
(0.22)
Coating
coating EPOXY
13.93
0.43
MFP171
Isolation voltage
Dimensions in mm.
GRADE
MPP
Sendust (1)
High-Flux
2013 Jul 31
B (mT) at
H = 100 kA/m;
f = 10 kHz;
T = 25 C
f = 100 kHz;
= 100 mT;
B
T = 25 C
17 8 %
14
640
23.9
TX51/14-M2-A17
32 8 %
26
700
19.1
TX51/14-M2-A32
73 8 %
60
760
11.9
TX51/14-M2-A73
AL
(nH)
TYPE NUMBER
152 8 %
125
800
11.9
TX51/14-M2-A152
179 8 %
147
800
12.7
TX51/14-M2-A179
195 8 %
160
800
12.7
TX51/14-M2-A195
210 8 %
173
800
12.7
TX51/14-M2-A210
243 8 %
200
800
23.9
TX51/14-M2-A243
365 8 %
300
800
23.9
TX51/14-M2-A365
32 8 %
26
1000
25.5
TX51/14-S7-A32-MC
73 8 %
60
1030
13.6
TX51/14-S7-A73-MC
91 8 %
75
1040
13.6
TX51/14-S7-A91-MC
109 8 %
90
1050
13.6
TX51/14-S7-A103-MC
152 8 %
125
1060
13.6
TX51/14-S7-A152-MC
17 8 %
14
890
39.8
TX51/14-H2-A17
32 8 %
26
980
31.9
TX51/14-H2-A32
73 8 %
60
1280
28.7
TX51/14-H2-A73
152 8 %
125
1370
31.9
TX51/14-H2-A152
1093
Ferroxcube
TX57/26/15
57.6 0.4
PARAMETER
VALUE UNIT
(I/A)
0.546
mm1
Ve
effective volume
28600
mm3
Ie
effective length
125
mm
Ae
effective area
229
mm2
mass of core
(for i 125)
MPP
240
Sendust
176
High-Flux 226
26 0.4
(0.23)
Coating
coating EPOXY
15.65
0.45
MFP172
Isolation voltage
Dimensions in mm.
GRADE
MPP
Sendust
(1)
High-Flux
2013 Jul 31
B (mT) at
H = 100 kA/m;
f = 10 kHz;
T = 25 C
f = 100 kHz;
= 100 mT;
B
T = 25 C
32 8 %
14
640
42.9
TX57/15-M2-A32
AL
(nH)
TYPE NUMBER
60 8 %
26
700
34.3
TX57/15-M2-A60
138 8 %
60
760
21.5
TX57/15-M2-A138
287 8 %
125
800
21.5
TX57/15-M2-A287
306 8 %
147
800
22.9
TX57/15-M2-A306
333 8 %
160
800
22.9
TX57/15-M2-A333
360 8 %
173
800
22.9
TX57/15-M2-A360
417 8 %
200
800
42.9
TX57/15-M2-A417
60 8 %
26
1000
45.8
TX57/15-S7-A60-MC
138 8 %
60
1030
24.5
TX57/15-S7-A138-MC
172 8 %
75
1040
24.5
TX57/15-S7-A172-MC
207 8 %
90
1050
24.5
TX57/15-S7-A207-MC
287 8 %
125
1060
24.5
TX57/15-S7-A287-MC
32 8 %
14
890
71.5
TX57/15-H2-A32
60 8 %
26
980
57.2
TX57/15-H2-A60
138 8 %
60
1280
51.5
TX57/15-H2-A138
287 8 %
125
1370
57.2
TX57/15-H2-A287
1094
Ferroxcube
TX57/36/14
57.6 0.4
PARAMETER
VALUE UNIT
(I/A)
0.990
mm1
Ve
effective volume
20650
mm3
Ie
effective length
143
mm
Ae
effective area
144
mm2
mass of core
(for i 125)
MPP
175
Sendust
127
High-Flux 165
35.15 0.45
(0.22)
Coating
coating EPOXY
14.43
0.43
MFP173
Isolation voltage
Dimensions in mm.
GRADE
MPP
Sendust (1)
High-Flux
2013 Jul 31
B (mT) at
H = 100 kA/m;
f = 10 kHz;
T = 25 C
f = 100 kHz;
= 100 mT;
B
T = 25 C
18 8 %
14
640
31.0
TX57/14-M2-A18
33 8 %
26
700
24.8
TX57/14-M2-A33
75 8 %
60
760
15.5
TX57/14-M2-A75
156 8 %
125
800
15.5
TX57/14-M2-A156
185 8 %
147
800
16.5
TX57/14-M2-A185
AL
(nH)
TYPE NUMBER
200 8 %
160
800
16.5
TX57/14-M2-A200
218 8 %
173
800
16.5
TX57/14-M2-A218
250 8 %
200
800
31.0
TX57/14-M2-A250
374 8 %
300
800
31.0
TX57/14-M2-A374
33 8 %
26
1000
33.0
TX57/14-S7-A33-MC
TX57/14-S7-A75-MC
75 8 %
60
1030
17.7
94 8 %
75
1040
17.7
TX57/14-S7-A94-MC
112 8 %
90
1050
17.7
TX57/14-S7-A112-MC
156 8 %
125
1060
17.7
TX57/14-S7-A156-MC
18 8 %
14
890
51.6
TX57/14-H2-A18
33 8 %
26
980
41.3
TX57/14-H2-A33
75 8 %
60
1280
37.2
TX57/14-H2-A75
156 8 %
125
1370
41.3
TX57/14-H2-A156
1095
Ferroxcube
TX78/49/13
78.35 0.55
PARAMETER
VALUE UNIT
(I/A)
1.13
mm1
Ve
effective volume
34700
mm3
Ie
effective length
200
mm
Ae
effective area
177
mm2
mass of core
(for i 125)
MPP
288
Sendust
200(1)
High-Flux 272
48.7 0.5
g
(0.28)
coating EPOXY
13.27
0.57
Coating
The cores are coated with epoxy. The colour is black
(Sendust), grey (MPP) or khaki (High-Flux).
Maximum operating temperature is 200 C.
MFP174
Dimensions in mm.
Isolation voltage
AC isolation voltage : 1000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
GRADE
MPP
Sendust (1)
High-Flux
B (mT) at
AL
(nH)
H = 100 kA/m;
f = 10 kHz;
T = 25 C
f = 100 kHz;
= 100 mT;
B
T = 25 C
16 8 %
14
640
52.1
TX78/13-M2-A16
30 8 %
26
700
41.6
TX78/13-M2-A30
68 8 %
60
760
26.0
TX78/13-M2-A68
142 8 %
125
800
26.0
TX78/13-M2-A142
225 8 %
200
800
52.1
TX78/13-M2-A225
30 8 %
26
1000
55.5
TX78/13-S7-A30-MC
68 8 %
60
1030
29.7
TX78/13-S7-A68-MC
16 8 %
14
890
86.8
TX78/13-H2-A16
30 8 %
26
980
69.4
TX78/13-H2-A30
68 8 %
60
1280
62.5
TX78/13-H2-A68
142 8 %
125
1370
69.4
TX78/13-H2-A142
Note
1. Mechanical dimensions : OD 78.9, ID 48.2, H 13.84
2013 Jul 31
TYPE NUMBER
1096
Ferroxcube
TX78/49/16
78.35 0.55
PARAMETER
VALUE UNIT
(I/A)
0.879
mm1
Ve
effective volume
45300
mm3
Ie
effective length
200
mm
Ae
effective area
227
mm2
mass of core
(for i 125)
MPP
377
Sendust
262(1)
High-Flux 356
48.7 0.5
g
(0.28)
coating EPOXY
Coating
16.46
0.56
MFP175
Dimensions in mm.
Isolation voltage
AC isolation voltage : 1000 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
GRADE
MPP
Sendust
High-Flux
2013 Jul 31
AL
(nH)
B (mT) at
H = 100 kA/m;
f = 10 kHz;
T = 25 C
f = 100 kHz;
= 100 mT;
B
T = 25 C
TYPE NUMBER
20 8 %
14
640
68.0
TX78/16-M2-A20
37 8 %
26
700
54.4
TX78/16-M2-A37
TX78/16-M2-A85
85 8 %
60
760
34.0
178 8 %
125
800
34.0
TX78/16-M2-A178
37 8 %
26
1000
72.5
TX78/16-S7-A37
85 8 %
60
1030
38.7
TX78/16-S7-A85
20 8 %
14
890
113
TX78/16-H2-A20
37 8 %
26
980
90.6
TX78/16-H2-A37
85 8 %
60
1280
81.5
TX78/16-H2-A85
178 8 %
125
1370
90.6
TX78/16-H2-A178
1097
Ferroxcube
Iron powder
CBW624
2013 Jul 31
1098
Ferroxcube
Iron powder
T N 20/13/6 2P90 X
Ae
(mm2)
TN7.5/4.1/3
83
4.81
0.6
TN12/8/4.4
290
9.37
CORE TYPE
TN17/9.8/4.4
635
15.8
TN20/13/6
1020
20.4
7.5
TN24/15/7.5
1895
32.8
13
TN27/15/11
3720
60.4
25
TN33/20/11
5200
65.0
35
2013 Jul 31
special version
MASS
(g)
core material
core size
coating type N- polyamide 11 (nylon)
core type
CBW199
1099
Ferroxcube
TN7.5/4.1/3
8.1 0.3
handbook, halfpage
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
3.58
mm1
Ve
effective volume
83
mm3
Ie
effective length
17.3
mm
Ae
effective area
4.81
mm2
mass of core
0.6
;;;;
;;;;
3.5 0.3
Coating
(0.3)
coating PA11
3.3
0.5
MGC188
Isolation voltage
DC isolation voltage: 1500 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
Dimensions in mm.
AL
(nH)
TYPE NUMBER
2P40
14 10%
40
TN7.5/4.1/3-2P40
2P50
18 10%
50
TN7.5/4.1/3-2P50
2P65
23 10%
65
TN7.5/4.1/3-2P65
2P80
28 10%
80
TN7.5/4.1/3-2P80
2P90
30 +10/15%
90
TN7.5/4.1/3-2P90
2013 Jul 31
1100
Ferroxcube
TN12/8.4/4
13.0 0.3
handbook, halfpage
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
3.30
mm1
Ve
effective volume
290
mm3
Ie
effective length
30.9
mm
Ae
effective area
9.37
mm2
mass of core
;;;;
;;;;
7.4 0.3
Coating
(0.3)
coating PA11
4.8
0.5
MGC327
Isolation voltage
DC isolation voltage: 1500 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
Dimensions in mm.
AL
(nH)
TYPE NUMBER
2P40
15 10%
40
TN12/8/4.4-2P40
2P50
19 10%
50
TN12/8/4.4-2P50
2P65
25 10%
65
TN12/8/4.4-2P65
2P80
31 10%
80
TN12/8/4.4-2P80
2P90
33 +10/15%
90
TN12/8/4.4-2P90
2013 Jul 31
1101
Ferroxcube
TN17/9.8/4.4
17.8 0.3
handbook, halfpage
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
2.55
mm1
Ve
effective volume
635
mm3
Ie
effective length
40.2
mm
Ae
effective area
15.8
mm2
mass of core
;;;;
;;;;
8.9 0.3
Coating
(0.3)
coating PA11
4.8
0.5
CBW200
Isolation voltage
DC isolation voltage: 1500 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
Dimensions in mm.
AL
(nH)
TYPE NUMBER
2P40
20 10%
40
TN17/9.8/4.4-2P40
2P50
25 10%
50
TN17/9.8/4.4-2P50
2P65
32 10%
65
TN17/9.8/4.4-2P65
2P80
40 10%
80
TN17/9.8/4.4-2P80
2P90
42 +10/15%
90
TN17/9.8/4.4-2P90
2013 Jul 31
1102
Ferroxcube
TN20/13/6
PARAMETER
VALUE
(I/A)
2.44
mm1
Ve
effective volume
1020
mm3
Ie
effective length
49.9
mm
Ae
effective area
20.4
mm2
mass of core
7.5
20.5 0.5
handbook, halfpage
UNIT
;;;;
;;;;
12.6 0.5
Coating
(0.3)
coating PA11
6.5
0.5
CBW365
Isolation voltage
DC isolation voltage: 1500 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
Dimensions in mm.
2P40
21 10%
40
TN20/13/6-2P40
2P50
26 10%
50
TN20/13/6-2P50
2P65
34 10%
65
TN20/13/6-2P65
2P80
41 10%
80
TN20/13/6-2P80
2P90
44 +10/15%
90
TN20/13/6-2P90
GRADE
2013 Jul 31
1103
TYPE NUMBER
Ferroxcube
TN24/15/7.5
24.3 0.5
handbook, halfpage
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
1.76
mm1
Ve
effective volume
1895
mm3
Ie
effective length
57.8
mm
Ae
effective area
32.8
mm2
mass of core
13
;;;;
;;;;
13.8 0.5
Coating
(0.3)
coating PA11
8.1
0.5
CBW202
Isolation voltage
DC isolation voltage: 1500 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
Dimensions in mm.
2P40
29 10%
40
TN24/15/7.5-2P40
2P50
36 10%
50
TN24/15/7.5-2P50
2P65
47 10%
65
TN24/15/7.5-2P65
2P80
57 10%
80
TN24/15/7.5-2P80
2P90
61 +10/15%
90
TN24/15/7.5-2P90
GRADE
2013 Jul 31
1104
TYPE NUMBER
Ferroxcube
TN27/15/11
27.5 0.5
handbook, halfpage
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
1.02
mm1
Ve
effective volume
3720
mm3
Ie
effective length
61.6
mm
Ae
effective area
60.4
mm2
mass of core
25
;;;;
;;;;
14 0.5
Coating
(0.3)
coating PA11
11.4
0.5
CBW203
Isolation voltage
DC isolation voltage: 1500 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
Dimensions in mm.
2P40
49 10%
40
TN27/15/11-2P40
2P50
62 10%
50
TN27/15/11-2P50
2P65
80 10%
65
TN27/15/11-2P65
2P80
94 10%
80
TN27/15/11-2P80
2P90
105 +10/15%
90
TN27/15/11-2P90
GRADE
2013 Jul 31
1105
TYPE NUMBER
Ferroxcube
TN33/20/11
RING CORES
Effective core parameters
33.6 0.5
handbook, halfpage
SYMBOL
PARAMETER
VALUE
UNIT
(I/A)
1.23
mm1
Ve
effective volume
5200
mm3
Ie
effective length
80.0
mm
Ae
effective area
65.0
mm2
mass of core
35
;;;;
;;;;
19.2 0.5
Coating
(0.3)
coating PA11
11.5
0.5
CBW204
Isolation voltage
DC isolation voltage: 1500 V.
Contacts are applied on the edge of the ring core, which is
also the critical point for the winding operation.
Dimensions in mm.
2P40
41 10%
40
TN33/20/11-2P40
2P50
51 10%
50
TN33/20/11-2P50
2P65
67 10%
65
TN33/20/11-2P65
2P80
82 10%
80
TN33/20/11-2P80
2P90
87 +10/15%
90
TN33/20/11-2P90
GRADE
2013 Jul 31
1106
TYPE NUMBER
ASIA
Taipei, Taiwan
Ferroxcube Taiwan
Dongguan, China
Ferroxcube China
EUROPE
Hamburg, Germany
Ferroxcube Germany
Tel: +49 (40) 527 28 302
Fax: +49 (40) 527 28 308
Skierniewice, Poland
Ferroxcube Polska
Tel: +48 46 834 00 07
Fax: +48 46 834 00 35
Guadalajara, Spain
Hispano Ferritas
Tel: +34 (949) 247 179
Fax: +34 (949) 247 146
NORTH AMERICA
For a complete listing of all Ferroxcube sales offices, distributors, and representatives, please visit "contact us" at
www.ferroxcube.com
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reli able and may be changed without notice.
No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.
Printed in Taiwan