Professional Documents
Culture Documents
PDMS General Commands
PDMS General Commands
-- Add the CE
ADD CE
-- Add CE Pipe Connection Ref
ADD CREF
-- Add CE with column 35 (See Colour Sheet)
ADD CE COL 35
-- Add all disciplines that overlap CE
ADD ALL WITHIN VOL CE
-- Add all disciplines that overlap CE with a volume of 100mm all round
ADD ALL WITHIN VOL CE 100
-- Add all Sections that overlap CE
ADD ALL SCTN WITHIN VOL CE
-- Add all Equipment that overlaps CE
ADD ALL EQUIP WITHIN VOL CE
-- Add Site
ADD SITE
AID
Remove unwanted Aids from the 3D View:
AID CLEAR LINE ALL
AT
-- Move CE to a new cursor position
AT @
-- Move CE to a selected P-Point
AT IDP@
-- Move CE to a Selected P-Line
AT IDPL@
AUTO
Zoom in on the Current Element:
AUTO CE
AXES
Set the Axes to appear at the CE:
AXES AT CE
Remove the Axes from the CE:
AXES OFF
BY
The following commands move the CE 100mm Up, Down, North, East respectively:
BY U100
BY D100
BY N100
BY E100
CHE (Check)
Perform a consistency check on the CE:
CHE CE
COL (Colour)
Change the CE colour to Violet:
COL CE VIOLET
Change the Active colour to Blue:
COL ACT BLUE
DELETE (Delete)
LOCK
Lock the CE and CE Members:
LOCK ALL
MARK / UNMARK
This will add a tag to the element on the 3D View.
MARK CE
MAR CE
MARK /ELEMENT01
MARK WITH 'Hello World' ID @
MARK WITH 'Hello World' CE
MARK WITH 'Hello World' /ELEMENT01
MARK WITH NAME ALL BRAN
MARK WITH NAME OF SPREF ALL VALVE WHERE PBORE GT 100
UNMARK CE
UNMARK ID @
UNMARK ALL
NAME
Renames the CE:
NAME /NEWNAME
PREC (Precision)
By default precision is set to 0 decimal places. To alter the precision (to 2 decimal places) enter:
PREC 2 DP
REFRESH
Refresh the screen:
REFRESH
REMOVE