This Work instruction is guideline for applying the Hose test method instead of vacuum test on
welds of watertight/Air Tight bulkhead where is impossible to be tested by vacuum method
2.
2.
Instruction
1 The weld joint shall be accepted by PV Shipyard” QC inspector
2.2 To use the compressed air nozzle to blow air on the weld joints from first side of watertight/air
tight bulkhead, and simultaneously to paint/ spray soap solution on the weld surface of second
side.
2.3 Each location shall be subjected to air blow from one side
24 To control the travel speed by maxim
of 0.5 meter per minutes in order to ensure that is
(if has).
enough time for air come out the leak px
2.5 Test pressure shall be 5 bars ( 72.5 psi) minimum.; The pressure gauge must be calibrated &
had value date
2.6 PV Shipyard shall submit the location to Surveyor before carry out any test.
27 Pt
on weld surface shall be removed prior to te
2.8 — Safety must be cared by production.
PYSHIPYARD
REVIEWED BY ABS
REVIEWED BY VSP
ON Dec | Losey
A SLM —
eypac/r0l¥
VIA