High Capacity FLEXICHEVRON™ Mist Eliminators
Special designs for higher pressure systems.
‘The higher capacity FLEXICHEVRON™ style 250 and 350 mist
¢eliminators rely primarily on separate liquid drainage channels for
their high capacity. These designs offer higher allowable velocities
and different vane geometries. This results in more efficient mist
removal, especially at higher pressures where the allowable velocity
decreases with the increasing gas density.
‘The unique characteristic of the style 250 or 350 designs is their “double
pocket” construction. Strategically located slots allow coalesced liquid
on the blade surfaces to be collected and directed into internal channels
shielded from the gas flow. Once inside these channels, the collected
liquid is then directed to drains that lead to a liquid sump in the bottom,
of the vessel or a seal system (cup). Compared to the unshielded single
pocket designs, they also provide higher turndown before noticeable
efficiency losses are experienced.
FLEXICHEVRON™ style 250 high capacity mist eliminator for
horizontal gas flow.
®
Horizontal gas flow.
10
Characteristics of High Capacity
FLEXICHEVRON™ Mist Eliminators
+ Custom engineered to fit ony
vessel shape
+ Allow reduced vessel sizes
and weights
+ Sturdy, durable construction
+ Maintain efficiency at
higher pressures
‘Materials of Construction
+ Stainless steel
+ Corbon steel
+ Nickel-based alloys
+ Titanium
+ Other special materials
available on request
How a High Capacity
FLEXICHEVRON™
Mist Eliminator Works
1. Double pocket hooks direct
the collected liquid (green
arrow) away from the main gas
stream (yellow arrow).
2. The collected liquid (green
arrow) flaws into separate
channels (purple).
3. The separate channels move
th liquid away from the gas
(red arrow),
Because the liquid is now isolated
from the gas stream and loss
subject to reentrainment, gas,
velocities can be more than
doubled in both horizontal and
vertical yas low coniguraPerformance of High Capacity FLEXICHEVRON™ General Design Parameters
As with other types of mist eliminators,
Using double pocket FLEXICHEVRON mist eliminators, itis possible selection of the proper mist eliminator is,
to efficiently remove droplets smaller than 10 microns in diameter in affected by:
lean service even at higher pressures. + Gasand liquid properties
+ Pressure
‘The table and graph below show the capacity and pressure drop
petformance of typival desig it ait aie/water system Droplet size
separation efficiency will be affected by physical properties of the gas + Desired performance
and liquid phases, gas velocity, liquid and gas densities, and liquid
surface tension.
+ Quantity of entrainment and solids
To make a preliminary selection:
1, Determine actual velocity by usin
Equation 1 (as described on page 7),
2. Choose K values based on table
below. The table shows capacity
and tumdown ratios achievable
with reasonable efficiency for high
capacity designs.
NRT
Style 250:
Horizontal Flow 0.12 {0.04] | 1.15 (0.35),
High Capacity
SeicSttip Row) 0.12 10.04] | 1.15 1035
Nigh Capacity pes i
FLEXICHEVRON™ style 350 high capacity mist eliminator for
vertical gas flow.
iy le 250735
Inones 0)
PRESSURE DROP, mm H.C (+254.
ctor, mae (1328 « see)
Comparative pressure drop in air-water
system af cimospherle conditions.
Vertical gas now.