Professional Documents
Culture Documents
SG7000 V200R005 Function Descriptions
SG7000 V200R005 Function Descriptions
Notice
The purchased products, services and features are stipulated by the commercial contract
made between Huawei and the customer. All or partial products, services and features
described in this document may not be within the purchased scope or the usage scope. Unless
otherwise agreed by the contract, all statements, information, and recommendations in this
document are provided AS IS without warranties, guarantees or representations of any kind,
either express or implied.
The information in this document is subject to change without notice. Every effort has been
made in the preparation of this document to ensure accuracy of the contents, but all
statements, information, and recommendations in this document do not constitute the warranty
of any kind, express or implied.
Website:
http://www.huawei.com
Email:
support@huawei.com
HUAWEI CONFIDENTIAL
Revision Records
Date
Revised
Description
Author
version
2008-7-23
V1.00
SG7000
marketing
HUAWEI CONFIDENTIAL
HUAWEI CONFIDENTIAL
Secret
1.1 SG7000-01
Function: Capacity and performance
Description:
1)
2)
3)
Capacity
performance
Capacity and cascading capability
I. SG7000-010101
Function: Capacity
Description:
Item
Index
12,096
756
GT capacity
200,000
2,048
2,048
4,096
Max. number of AS
1,024
5,120
5,120
1,024
256
II. SG7000-010201
Function: Performance
Description:
2009-9-15
HUAWEI CONFIDENTIAL
Page 5 of 37
Secret
Index
Item
Max. load over 64-kbit/s signaling link
0.99Erl
0.95Erl
0.95Erl
315ms
4920K MSU/s
2800K GTT/s
80GTT/s
2356GTT/s
10000 Packet/s
SBPU board)
III. SG7000-010301
1.2 SG7000-02
Function: Interface
Description:
Circuit interface: E1 interface (2.048 Mbit/s), T1 interface (1.544 Mbit/s)
Clock interface: 2.084 Mbit/s, 2.048 MHz and 8 kHz clock signal interfaces
FE interface: 10BaseT/Fx and 100BaseT/Fx
Standard NM interface: SNMP interface
Other: supporting MML
Supporting bit reverse function for convenient interconnection of the equipment
1.3 SG7000-03
Function: Basic networking
2009-9-15
HUAWEI CONFIDENTIAL
Page 6 of 37
Secret
Description:
1)
2)
3)
4)
5)
I. SG7000-030101
HUAWEI CONFIDENTIAL
Page 7 of 37
Secret
IV. SG7000-030401
HUAWEI CONFIDENTIAL
Page 8 of 37
Secret
V. SG7000-030501
1.4 SG7000-04
Function: Basic function
Description:
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
I. SG7000-040101
HUAWEI CONFIDENTIAL
Page 9 of 37
Secret
Description:
SG7000s Basic MTP Load Sharing
There are route and link selection fields (4-bit values, generally called SLS mask) respectively in
the destination signaling point table and the link set table of SG7000. If bit n of the SLS mask (0
n 4) is 1, then the 16 SLS values can be divided into 2n groups. For selecting a route in a route
set and a link in a link set, SG7000 adopts the similar algorithm.
Load sharing in MTP3 extension is: routing for ISUP messages and TUP messages is no longer
done according to the SLS, but according to the middle or higher four bits of the CIC (TUP, ISUP
message). However, the links are selected according to the SLS. In this way, the rule for selecting
the route is different from that for selecting the link, and the load can be shared more evenly.
Load sharing among multiple signaling points: When the multiple signaling point mode is adopted,
the SG7000 can share the load among the outgoing link sets by dividing the incoming link sets
into different groups. In this way, the load in a certain office direction can be evenly shared among
different link sets. Furthermore, this algorithm can adjust the group data according to the service
changes in different office directions, so as to share the load evenly.
MTP dummy SLS load share: SG7000 selects routes according to the actual SLS of the messages,
but selects links according to the dummy SLS producing by the lower 4 bit of messages OPC and
actual SLS, so different OPC may make the messages with the same actual SLS transmit by
different links and make the load be shared evenly.
III. SG7000-040301
HUAWEI CONFIDENTIAL
Page 10 of 37
Secret
V. SG7000-040501
HUAWEI CONFIDENTIAL
Page 11 of 37
Secret
Test connection is also called monitoring signaling connection. Monitoring signaling connection is
divided into forward monitoring and backward monitoring. Forward monitoring monitors
accessed signaling and backward monitoring monitors the processed signaling. The monitoring
can be implemented across the slots. If the monitoring party and the monitored party are not in the
same slot, the signaling is monitored across the slots.
IX. SG7000-040901
X. SG7000-041001
XI. SG7000-041101
HUAWEI CONFIDENTIAL
Page 12 of 37
Secret
discard level is used as threshold to discard messages. All these parameters can be configured in
SG7000.
XII. SG7000-041201
MTP3
SSCF
MTP2
SSCOP
AAL5/ATM
MTP1
G.804
ATM 2M Link
HUAWEI CONFIDENTIAL
Page 13 of 37
Secret
XIII. SG7000-041301
1.5 SG7000-05
Function: Optional Function
Description:
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
2009-9-15
SS7 FIREWALL
IUA convergence
MNP (mobile number portability)
FNR (Flexible Number Routing)
NPDB management entity
SMS Router
SMS Filter
ITU and ANSI protocol Conversion
Black&White Lists
Number transform
Terminal Information Collector (TIC)
Enhanded Routing Function
IN voice call Bypass
HUAWEI CONFIDENTIAL
Page 14 of 37
Secret
I. SG7000-050101
II. SG7000-050201
HUAWEI CONFIDENTIAL
Page 15 of 37
Secret
2.
3.
The SG7000 implements the MNP service based on the signaling relay function (SRF) of the
following standards:
3GPP Specifications:
3GPP 22.066: Support of Mobile Number Portability (MNP); Service description.
3GPP 23.066: Support of Mobile Number Portability (MNP); Technical realization.
ETSI GSM Specifications:
GSM 02.66: Support of Mobile Number Portability (MNP); Service description.
GSM 03.66: Support of Mobile Number Portability (MNP); Technical realization.
Implementation of the SRF service: The SG7000 is logically located before the HLR to intercept
the SRI message sent by the MSC to obtain the called MSISDN. After that, the SG7000 queries
the NP database:
z
If the callee is in the local network (originally a local network user or a user
ported in from another network), the SG7000 sends the SRI message to the
homed HLR.
z
If the callee is in a non-local network (originally a non-local network user or a
user ported out from the local network), the SG7000 returns an SRI_ACK
message to the MSC. The MSRN in the message is filled with
"RN+MSISDN" which is used by the MSC to connect the call to the correct
network. RN stands for routing number. After the MNP service is enabled,
each network operator is allocated with at lest one RN which is used for
addressing.
For the MNP service of pre-paid users, the SG7000 provides two solutions:
z
The SG7000 provides the ATI query mode to implement the MNP service.
The IN network obtains the user NP information from the SG7000-NPDB
through the ATI query interface and then performs relevant processing
(mainly distinguishes the tariff rate) based on the user NP status. After the
processing, the IN network provides the MNP service for the pre-paid users.
The ATI query interface complies with 3GPP TS 23.078 standard.
2009-9-15
HUAWEI CONFIDENTIAL
Page 16 of 37
Secret
The SG7000 intercepts the IDP message of the SCP and queries the NPDB
based on the called number. Then the SG7000 adds the RN to the front of
the called number and routes the IDP message to the SCP. The SCP obtains
the user NP information based on the called prefix in the IDP message and
then performs relevant processing (mainly distinguishes the tariff rate). After
the processing, the SCP provides the MNP service for the pre-paid users.
For details of the MNP service implementation, see Technical White Paper for MNP Service.
IV. SG7000-050401
2009-9-15
HUAWEI CONFIDENTIAL
Page 17 of 37
Secret
NPAC
SOAP/XML
SOAP/XML
SOAP/XML
SOA
BOSS
SmartKey Server
IP
NPDB
NPDB
NPDB
SG7000
SS7 / SIGTRAN
MSC
The currently provided SmartKey is developed based on Number Portability Clearinghouse (NPC,
that is, NPAC entity) of Telcordia. It provides the following external interfaces:
z
The SmartKey Server is connected with the NPC (NPAC), BOSS, and SOA
Client through SOAP1.1.
z
The SmartKey provides the client based on web browser, and you can
directly maintain the data through the web browser.
z
The SmartKey is connected with the STP-NPDB through the DB-Library
protocol. Any NPDB complying with this protocol can access the SmartKey
after adaptation.
z
For other network elements that do not support the DB-Library protocol, the
SmartKey synchronizes the NPDB file through FTP and then provides the
file to these network elements.
The SmartKey is physically based on SUN Netra240. Its operating system is Solaris 10 and its
database is Sybase 12.5. For details of the SmartKey, see Technical White Page for SmartKey.
The SmartKey can store up to 12,000,000 pieces of NP data.
Note:
NPAC: Number portability administration center
SOA: Service order administration
About SOAP: SOAP stands for Simple Object Access Protocol. It provides a simple and
extendable XML message processing frame with rich functions. It is used to define
high-level application protocols so as to provide higher interoperability in the distributed
heterogeneous environment. It has the following advantages: 1) It can be extended. 2) It
2009-9-15
HUAWEI CONFIDENTIAL
Page 18 of 37
Secret
can be used over any transmission protocol (such as TCP, HTTP, and SMTP) through
lower-layer protocols. 3) It is independent from programming model.
VI. SG7000-050601
HUAWEI CONFIDENTIAL
Page 19 of 37
Secret
HUAWEI CONFIDENTIAL
Page 20 of 37
Secret
Linkset: The link set index that applies this special routing function. For example, if the message
comes from the specific link set, it will be routed based on MAP operation code. But if the same
message comes from other link set, the message will be routed as general case.
Network Type: Configuring whether this special routing function is available for all TDM links
and/or all SIGTRAN links.
The routing conditions can be any combination of above.
XIII. SG7000-051301
HUAWEI CONFIDENTIAL
Page 21 of 37
Secret
SG7000 provides translation function between No.7 and SUA, M3UA and SUA, M2PA and SUA
and so on.
XVIII. SG7000-051801
XIX. SG7000-051901
2009-9-15
HUAWEI CONFIDENTIAL
Page 22 of 37
Secret
Checking the Personal list: The Personal list records the ordinary called party
groups that a subscriber is not allowed to make calls to.
Checking the Common list: The Common list records some commonly-used
special numbers that an ordinary subscriber is not allowed to dial.
Checking the Public list: The Public list records the numbers that are not
allowed to dial. The subscriber data configuration determines whether the
system restricts the calls based on calling or called numbers.
XX. SG7000-052001
1.6 SG7000-06
Function: OAM
Description:
1) Maintenance management
2) Data management
3) Alarm
4)
5)
Statistics
NTP
Hot-patch
NMS
Pseudo-message Function
6)
7)
8)
9)
2009-9-15
HUAWEI CONFIDENTIAL
Page 23 of 37
Secret
I. SG7000-060101
Function: Alarm
Description:
Alarm management receives and handles the variety of alarm information generated by the system.
Depending on the category and severity level of the alarms, the appropriate alarm terminal device
such as the alarm box or the alarm station will be driven to produce different audible and visual
signals. Moreover, the corresponding alarm message will be interpreted and then transmitted to the
network management center through the network management interface. In addition, alarm
management also has the functions to store the alarm information, query the alarm history and set
the alarm processing mode.
IV. SG7000-060401
HUAWEI CONFIDENTIAL
Page 24 of 37
Secret
Description:
To realize built-in online No.7 signaling monitor and decoding functions, additional interfaces are
unnecessary for SG7000 of Huawei. SG7000 can perform real-time display and information
decoding of the monitored signaling link information in the background maintenance terminal.
Moreover, this function brings no affection to the normal working signaling links at all.
The built-in real-time online monitor function of NO.7 signaling can provide functions such as
real-time online signaling monitor, message decoding and tracing message storage. In addition,
certain link, multiple links or all links can be selected for tracing. The interface of NO.7 signaling
online monitor function is illustrated as the figure below:
The built-in real-time online monitor function of NO.7 signaling can provide the following
functions:
(1) Real-time online signaling trace;
(2) Real-time online signaling filter: Filtering conditions can be flexibly set, including DPC,
OPC, SI, NI, H0, H1, SLS, CIC and message direction;
(3) Detailed signaling decoding: The decoding format is the same as the universal No.7 signaling
analyzer, and the tracing message can be explained to the user level (TUP/ISUP/MAP/INAP);
(4) Traced signaling storage: Facilitate subsequent analysis;
(5) Tracing of partial links and link sets, or all signaling links.
The built-in real-time online monitor function of NO.7 signaling greatly facilitates deployments of
backbone network engineering of China Mobile and provincial signaling network engineering and
at the same time facilitates daily maintenance. This greatly improves the deployment and
2009-9-15
HUAWEI CONFIDENTIAL
Page 25 of 37
Secret
maintenance efficiency. Thanks to its power functions, cost is effectively reduced, so it is highly
appraised by the engineering personnel and maintenance personnel of users.
V. SG7000-060501
Function: Statistics
Description:
SG7000 provide signaling statistics function, fully comply with ITU-T Q.752 standard. At the
same time, SG7000 support statistics function of M3UA/M2PA protocol.
VI. SG7000-060601
Function: NTP
Description:
SG7000 support NTP protocol in BAM server.
VII. SG7000-060701
Function: Hot-patch
Description:
SG7000 support hot-patch function in service.
VIII. SG7000-060801
Function: NMS
Description:
SG7000 support Huawei iManager N2000/M2000 UMS.
IX. SG7000-060901
HUAWEI CONFIDENTIAL
Page 26 of 37
Secret
X. SG7000-061001
If the system correctly translates the global title, the returned results will contain the global title
length, global title, translation result, destination signaling point code, subsystem number,
matching global title length and matching global title..
XI. SG7000-061101
HUAWEI CONFIDENTIAL
Page 27 of 37
Secret
Description:
QoS is an important parameter of broad band. SG7000 provides a measurement function for QoS
and reviews them as graph. QoS is shown by a set of the following items:
z
Total number of transmitted messages
z
Retransmitted messages number
z
Average time interval
z
Max message transmission interval
z
Min message transmission interval
XII. SG7000-061201
HUAWEI CONFIDENTIAL
Page 28 of 37
DPC statistics
Resource statistics
Secret
1.7 SG7000-07
Function: Security management
Description:
Flexible authority management:
The BAM authorizes the workstation attempting to access and the subscriber account. Authorities
of a workstation and a subscriber can be configured flexibly, and the minimum allocated authority
is command group. Commands in a command group can be set and combined by subscribers
freely.
Detailed logs:
The BAM records all executed commands and saves as a log for query. The information recorded
includes commands, parameters, execution time, operator, and workstation.
BAM protector:
The BAM protector effectively prevents illegal programs to ensure the security of the BAM.
1.8 SG7000-08
Function: Troubleshooting
Description:
The SG7000 detects faults and generates alarms to notify the NMS. The reported information can
help locate, solve problems, and insulate faulty units. The SG7000 can automatically recover the
faulty parts or insulate them if the faults cannot be removed. Alarm levels can be defined
accordingly.
The SG7000 can manage faults occurred in the following items:
z
DPC
z
route
z
NSL
z
HSL (ATM, Q.703)
z
SPMC
z
SCTP link
z
boards
z
environment (temperature and humidity)
z
AS
z
ASP
z
Interface (E1/FE)
The SG7000 can manage the following performance:
z
Load of CPU
z
Load of link
2009-9-15
HUAWEI CONFIDENTIAL
Page 29 of 37
Secret
1.9 SG7000-09
Function: Reliability
Description:
1) Reliability solution
2) Reliability indexes
I. SG7000-090101
Index
System availability
99.99989%
Unavailable time
0.54 min/yr.
MTBF
87.67 yr.
1.10 SG7000-10
Function: Hardware Structure
Description:
1) Cabinet
2)
2009-9-15
Frame
HUAWEI CONFIDENTIAL
Page 30 of 37
Secret
I. SG7000-100101
Function: Cabinet
Description:
19-inch N68-22 cabinet (2200 mm 600 mm 800 mm) in conformance with the International
Electro technical Commission (IEC) standard is adopted for SG7000. The SG7000 cabinet
supports 48V DC input.
II. SG7000-100201
Function: Frames
Description:
The frame adopts standard structure of 19-inch width and 9U height, which complies with the
IEC297 standard. It features high reliability, high integration, and powerful processing capability.
2009-9-15
HUAWEI CONFIDENTIAL
Page 31 of 37
Secret
1.11 SG7000-11
Function: License
Description:
License is a string of characters positively encrypted by a certain tool according to the
authentication content. The unique ID (might be MAC address) of the equipment is to be
authenticated.
The control function of a License file includes two aspects: function control and subscriber display
restriction.
The function control is implemented through the MML Server. When receiving an MML
command, the system reads the License file to judge whether the subscriber has the authority to
execute the command. If the subscriber has no authority, the system returns a prompt indicating a
wrong operation.
Display restriction function is different due to different subscribers. This function is used to
restrict subscribers to execute allowed commands only.
1.12 SG7000-12
Function: Technical standards
Description:
1)
2)
3)
4)
5)
6)
7)
8)
Chinese Specifications
ITU-T Recommendation
IEEE Standard
IETF Standard
ANSI Standard
ETSI Standard
PNO-ISC Standard
Environment Standard
I. SG7000-120101
National
Technical
Specification
of
No.7
Signaling
Mode-Signaling
HUAWEI CONFIDENTIAL
Page 32 of 37
Secret
Message
Transfer
Part
Level
User
Adaptation
Layer
(M3UA)
(YD/T1192-2002)
z
II. SG7000-120102
ITU-T Q.711Q.719 (07/96) Specifications of Signaling System No.7 Signaling connection control part
ITU-T Q.770Q.779 (07/96) Specifications of Signaling System No.7 Transaction Capabilities Application Part
III. SG7000-120103
2009-9-15
HUAWEI CONFIDENTIAL
Page 33 of 37
Secret
IV. SG7000-120104
V. SG7000-120105
VI. SG7000-120106
VII. SG7000-120107
2009-9-15
HUAWEI CONFIDENTIAL
Page 34 of 37
Secret
VIII. SG7000-120108
1.13 SG7000-13
Function: Interconnection list
Description:
Number
Entity
Suppliers of
Type/Version
Operator
Core Network
1
MSC
Alcatel
Motorola
Siemens
SR9.0, SR8.0
Nokia
DX200-M10, DX200-M11
Ericsson
Huawei
MSC33, MSC60
Beijing
GSM15, GSM16
Telecom
2
HLR
Ericsson
Siemens
2009-9-15
SR9.0, SR8.0
HUAWEI CONFIDENTIAL
Secret
Entity
Suppliers of
Type/Version
Operator
Core Network
China Unicom
Alcatel
A8360-G9
Huawei
G3HLR36
Nokia
DX200-M10, DX200-M11
HP
Beijing
GSM15, GSM16
Telecom
3
IN
Siemens
Huawei
WINV200R002, WINV200R003
Alcatel(S1240)
Nokia
Ericsson
VMS
Technomen
SMS
Logica
Comptel
Lucent
Nokia
SC5BCD3
Ericsson
Huawei
V3.0, V2.8
Chine Mobile
Chine Mobile
GPRS
2009-9-15
Ericsson
/
HUAWEI CONFIDENTIAL
Page 36 of 37
Entity
Suppliers of
Type/Version
Secret
Operator
Core Network
Huawei
SGSNV800R002,
Chine Mobile
SGSNV800R003
Location
Base
Services
2009-9-15
Motorola
CSGSN-170090
Chine Mobile
Nokia
SG3.0-ECD4
Chine Mobile
Siemens
Alcatel
Siemens
Huawei
HUAWEI CONFIDENTIAL
Page 37 of 37