Professional Documents
Culture Documents
PU120T Operating Guide
PU120T Operating Guide
PU120T Operating Guide
Install:
Firstly put the disc into CD-ROM. Auto-run and press SETUP to finish the driver installation.
Function test: Please connect convertor with one good ps2 gamepad ,and then test its function
1 Connect the convertor USB port to your computerthen connect convertor with one good ps2 gamepad
2. Press Start-Set up-Control Panel-GAME CONTROLLER (Pic-1)
1
3.Choose Twin USB Network Gamepad , press Properties and enter into the Function Test page. (Pic-2)
a.In this page you can test all basic function keys, X,Y,Z axis and the function of replacing keyboard and mouse
(the details will be explained in the following Replacing keyboard and mouse). Press any key ,which will have
respond red flash on the page
b.Adjust axis to center position in the Calibration Function page, press Default and then press set to
calibrate it .(Pic-3)
c.Press Vibration Test to test mortors and vibrating function (pic-4)
5
EXP: Take Key 1 as an example , let it replace key A function in the keyboard. Details as below:
At Pic-6, choose Keyboard key in the drop menu turning to pic-7,and press button A ,then press OK.
Now the :key 1 in the joystick have the same function as A in the keyboard.
PS.: You cant use some of the function if you don t install the driver correctly.