Professional Documents
Culture Documents
How To Upgrade PVR Firmware
How To Upgrade PVR Firmware
How To Upgrade PVR Firmware
1. USB Download
1) Connect PC & STB with USB Cable
2) Main Menu-> Select ‘HDD Mode Change PVR’-> Press ‘0000’ on the RCU
( Showed ‘HDD Mode Change PC’ )
3) In PC
a) Showed new Local Disk on the PC ( ‘F:W’ or ‘E:W’ )
b) Copy new Firmware in the Local Disk.
4) Remove the USB Cable
5) Main Menu-> Select “HDD Mode Change PC”-> Press “0000” on the RCU
Once “HDD Mode Change PVR”, STB is automatically re-boot.
6) Main Menu-> ‘Select HDD Interface’ ->’Select Upgrade from HDD’
Select ‘new firmware -> Press ‘0000’ on the RCU
7) Automatically upgraded & re-boot.
2. Serial Download
1) Connect PC & STB with Serial Cable
2) Off & On with A/C Power on the rear panel.
3) Once display ‘ on ’ on the front panel,
Press ‘ OK->Exit->OK->Exit->OK->Exit ’ on the RCU.
4) Display ‘B-30 or B-31’ ( ready to download message ) on the front panel.
5) Access the ‘PVR Loader v3.36 Sep 7 2005.exe’ Select new Firmware
6) Download.
7) Automatically upgraded & re-boot
2007.03.26