Professional Documents
Culture Documents
T308-12 Exercise 12.1 - RevA
T308-12 Exercise 12.1 - RevA
12.1.1 Goals
Analyze the influence of changing the Scan Cycle Time on the CPU load.
12.1.2 Legend
<>
Bold
1/3
2/3
Check if the ModuleBus parameter Scan Cycle Time is set to 0 (default). If not,
change the setting to 0 and download the hardware configuration again.
Check the Total system Load and Cyclic Load in the System Diagnostic interaction
window.
Change the ModuleBus parameter Scan Cycle Time to 100ms. Download the
hardware configuration again.
Check the Total system Load and Cyclic Load in the System Diagnostic interaction
window.
Analyze the difference between the two situations. Describe the influence of Scan
Cycle Time on the CPU load.
3/3