The document provides a cost estimate for supplying and installing a standby power generator system. It includes 1) a 275kVA diesel generator set for PHP 1,980,000, 2) installation works for PHP 99,000, 3) an automatic transfer switch for PHP 210,000, 4) installation of the transfer switch for PHP 84,000, and 5) testing, training, maintenance and warranty services for a total project price of PHP 2,373,000 to be completed within 60 calendar days.
The document provides a cost estimate for supplying and installing a standby power generator system. It includes 1) a 275kVA diesel generator set for PHP 1,980,000, 2) installation works for PHP 99,000, 3) an automatic transfer switch for PHP 210,000, 4) installation of the transfer switch for PHP 84,000, and 5) testing, training, maintenance and warranty services for a total project price of PHP 2,373,000 to be completed within 60 calendar days.
The document provides a cost estimate for supplying and installing a standby power generator system. It includes 1) a 275kVA diesel generator set for PHP 1,980,000, 2) installation works for PHP 99,000, 3) an automatic transfer switch for PHP 210,000, 4) installation of the transfer switch for PHP 84,000, and 5) testing, training, maintenance and warranty services for a total project price of PHP 2,373,000 to be completed within 60 calendar days.
275kva standby power, 220v, 3, 60 Hz, complete with all standard instrumentation panel and a generator control unit for the automatic start (with ATS) of the generator during power interruption. The prime mover shall be a diesel engine with sufficient rating to drive the generator at full load capacity, water cooled. The genset shall be in a soundproofed, all weather metal enclosure with the appropriate original factory paint. The unit shall be mounted on a steel skid base frame with set mounted tropical radiator with fan assembly.
1,980,000.00
2) The installation works shall include but not
be limited to the following: 2.1 Installation of appropriate mounting bolts to secure the unit in place. 2.2 Installation of exhaust pipe extension so that only 1.00m of it is outside the powerhouse building line. 2.3 Installation of equipment grounding as per Manufacturers specifications.
99,000.00
Supply, deliver and install, 1 unit automatic
transfer switch(ATS) with ratings to match the above-mentioned genset, solenoid type in NEMA 1 enclosure. 210.000.00
Installation works shall include but not be limited to
the following: 4.1 Dismantling of existing defective ATS including wirings and accessories. 4.2 Mounting of new ATS and provide connections for loads and control wirings from ATS to genset control panel. 4.3 All wirings shall be as per Manufacturers specs and should suit actual field conditions. 84,000.00
The above contract shall include the following:
5.1 Complete testing to include simulation of power failure, that is, transfer of power from normal to genset and vice versa. 5.2 Training of select NHA maintenance personnel. 5.3 Free quarterly check up and preventive maintenance until end of warranty. 5.4 Warranty shall be one(1) year or 1,000 running hours, whichever comes first. 5.5 CONTRACT DURATION: 60 calendar days upon receipt of Notice to Proceed. TOTAL LOT PRICE