Professional Documents
Culture Documents
Grade 9
Grade 9
Grade 9
MrBrazilDesignTechnology.com
STORAGE UNIT
2013/14
Mr. Brazil
PREZI
STORAGE UNIT
2013/14
Mr. Brazil
Research Strategy:
Research
Source/ Sources
Why?
When?
Other designs
22/9/2013
Target market
questionnaires
24/9/2013
Joints
Materials
17/9/2013
Tools
To know a little about how to use them, how they look, their
names, their primary uses, their other uses and alternate my
design idea to see how I can use the tools.
17/9/2013
Machines
17/9/2013
Hinges
24/9/2013
Anthropometrics
I will need to make a design that is not too big for the
audiences hand and not too small; I will do this by looking at
the average middle part of the hands dimensions, so that it
23/9/2013
Measurements
19/9/2013
18/9/2013
STORAGE UNIT
2013/14
Mr. Brazil
Other designs:
Internet:
This design, in my opinion is a very good design for people who only store important legal cards such as ID
cards, License and etc. However as a general use it is not very good because it is too narrow which means
not a lot of cards can be stored, but the way the hinge is placed and the shape of the lid makes it look neat
and organized on the desk, it could be however be jammed and hard to open, It is also a very simple design
which is most probably what business women and men like. The ideas that I would like to take from this
design is the lid of the box.
This design, in my opinion is a he best design I found so far because of many reasons, it is very practical
because it has a divider and two holes for the fingers; for lifting up the last cards in the box without
getting annoyed or frustrated. The lid looks simple and nice, and I also liked about this design the fact
that you can see the top and bottom of the box which gives you the freedom to see most of the cards,
however if someone left the card at the bottom for a long time the card would collect dust and people
would probably not want to use it because it doesnt look too good now.
This is in my opinion is the second best in my opinion because it helps keep the cards clean for later
use, it also keeps them in a nice pile, because if it was to big the cards would slip and it would be
annoying to get out so that might be something to avoid in my design, another bad quality in this
product is the fact that you have to pull it out, this might be a struggle because you will have to
push it down to have the drawer out of the case, I think an improvement for this would be to put a
small handle on both sides or remove the drawer part of it.
1- "Cool Business Card Holders." Boxed in Design. N.P., n.d. Web. 14 Sept. 2013.
<http://boxedindesign.com/2010/02/cool-business-card-holders/>.
2- "Acrylic Businesscard Box." Products, Buy Products from Vanjin. N.p., n.d. Web. 14 Sept. 2013.
<http://www.vanjin.com/product/326/Acrylic-business-card-holder-box.html>.
3- "Wooden Business Card Box - Paua Koru Design." Shop New Zealand. N.p., n.d. Web. 14 Sept. 2013.
<http://www.shopnewzealand.co.nz/categories/art-craft/craft/wood-carving/wooden-business-card-box-paua-korudesign>.
From school:
This was a storage box that I found in my classroom, I think this is a good design and good
material, however if you try to open one the other one will open as well, which makes it a
challenge to many people, it also has one transparent drawer and the other is white, that in my
opinion doesnt look very professional. The overall look of the product depending on the target
audience is good with some faults, on way in which the artisan can improve this design is buy
having the sheet of acrylic between the two thicker so that the audience will not have a struggle
opening and closing it.
STORAGE UNIT
2013/14
Mr. Brazil
This was a storage box for makeup, in my opinion this is a pretty good design however it can be
improved by having smaller sections in each of them because that way they can be stored separately
without any struggles, the good things added on this design is the screw which allows you to slide it
instead of having it as a hinge, this will be easier to keep open but it will take up double the space you
need for the actual box, so it isnt that great for storage.
For this example I didnt have the product itself with me however I did have the picture, this picture
shows me that this jewelry box was designed in a great way because it has divisions for the different
jewelries and sections, the design on top is very simple and royal, the color red is also royal, this shows
that the artisan can produce a connection between the jewelry and the colors, because jewelry is
usually represented in royalty, on the picture I can also see the hinges on the back and I think it is good
that the artisan had two hinges because the lid would be quite heavy and two hinges will help stay
steady, keeping it from falling or having less of a guarantee.
From home:
This is the only card holders box that I found at home so I
took a picture of it, this is a very simple design it is relatively
easy to open, you can use your finger in the hole for lifting
up the last cards, it also has a small curve on the bottom to
lift the lid off if it doesnt come out by pulling, or if there are
a lot of cards inside
Measurements
50 cm
30 cm
STORAGE UNIT
2013/14
Mr. Brazil
This is a picture of two pieces of paper one in which has the exact
measurements of a card and the other has the exact measurement of two
cards with a 0.5 thick acrylic divider, the first one is for my first box design,
that will be a vertical box, it will also be 4 cm thick, I will need this because
I will need to determine if I will have enough material, the second one is
for my horizontal box, which will be 6cm high.
3. If you would use a box to store your cards, describe briefly how you would like it to be (size, color, and shape)
STORAGE UNIT
2013/14
Mr. Brazil
Classic (wood)
Practical
Other (please specify)
7. Would you take or leave this box?
Leave
Take where
The results
2- Approximately how
many cards do you use
on a daily basis?
0-3
4
5
6
7
8
9
10
Pretty
Light
Black
This is the only question which I have asked without giving any options
or choices I just asked the question and waited for the different ideas
from different people, there were too many ideas since I got responses
from about 30 people but the most common one was that it should be
small, and I dont think that will be much of a challenge because the size
of an average card is small. All of the others are mostly colors and
shades, but there are other properties that the business women and
men would like to have is that they would be Practical, different, pretty
and vertical.
STORAGE UNIT
2013/14
One
Clear
acrylic
Two
Mr. Brazil
STORAGE UNIT
2013/14
Mr. Brazil
Materials:
Plastic
Wood
I think I will use
plastic in my product
because I can shape/
carve and make
perfect shape, there
are also a lot of
different colors or I
can use recycled
plastic. I will also
need it because it is
light weighted and
will look nice on the
product.
Paint:
There are two types of paint, one of which is spray to paint, which I think I will use for any background
colors, and will be easier and more exact, it will also give me more time to be able to make other
designs using the second type of paint which is acrylic paint,
however if I wanted to use any type of paint on wood it has to
be mdf wood.
Tools:
Clamp:
Clamps are indispensable within the workshop for holding and securing work.
They are available in many sizes and are used for securing work to the surface of
a bench. They are also used to hold wood together while the glue is drying.
STORAGE UNIT
2013/14
Mr. Brazil
Tenon saw:
The Tenon saw is a type of back saw this is because it has a steel or brass back to
the saw. The tenon saw is generally used for cutting mortise and tenon joints. The
tenon saw is good at cutting straight lines in wood. That I am going to use when I
do cut the pieces of wood.
Coping saws:
Coping saws are used for cutting different types of wood or plastic. They are very good at cutting
curved shapes in wood or plastic. Coping saws can be tricky to use you need to keep the saw in a
horizontal position for it to cut correctly. Coping saw blades can be easily broken if used
incorrectly. That I am going to use when I do carve the pieces of wood.
Try-square:
The try square is pushed against a straight edge of wood and a marking knife or
pencil is used to make straight lines on the product.
File:
Hand files are used to smooth rough or sharp edges on material. Files can be
used to smooth metals or woods. Hand files are held within the hand and are
pushed flat to the surface of the material. The file is then pushed forwards and
back to smooth the material. I will use this to finalize the wood carvings.
Chisel and mallet:
The chisel is a very dangerous tool it is usually used along with a mallet, this tool cannot be
used unless with a clamp and a mallet, the mallet is either to make sure that your hands arent
touching the product while chiseling it, it is also used to hammer down the chisel when it is
chiseling large parts of wood.
STORAGE UNIT
2013/14
Mr. Brazil
Joints:
Dowel Joint:
I think this is the second hardest joint that will stick together properly; I will try my
best to do it, but it will be very hard because of the exact proportions however it is
the best joint and needs the least amount of glue which is what I need because if I
put too much it might spill over and destroy the design or the wood. I will be
needing this joined to do the round part of the box, I think that it will be very helpful
for me, I will have to drill out the exact size of the stick I have available, and the exact
same length for each of the four holes, I will do this using the pillar drill.
Dovetail Joinery:
I could also use this joint for the sides, this will be helpful because it is one of the
strongest joints used a lot, I will be able to this joint because it is similar to the finger
joint, however the finger joint was not very successful, so I searched and I found the
Dovetail Joinery.
http://woodworking.about.com/od/joinery/p/ThroughDovetail.htm
Mitre Joints:
This is the best joint I found so far, it looks great, it is relatively strong, and
it is not too hard to do, if you have the correct measurements, I think this
is the one I will be using in my product. These joints are usually used in
frames, which are expensive and stay for a long time, I am planning to use
this joint on the edges of the product to keep it strong and reliable, which
was one important part of my target audiences choice. I might however
combine the dowel joint with the mitre joint to make it even stronger.
Picture source: www.picstopin.com
Machines:
The Pillar Drill:
A Pillar drill is a fixed drill that is mounted or fixed to a floor so it cannot be
STORAGE UNIT
2013/14
Mr. Brazil
Laser cutter:
This is the machine that will help me make the joints or make
different shapes for my clock using plastic. But this is more for
the shapes rather than joints. It also carves into other pieces
of wood to make a lot of shapes on them. This machine is
mainly used for acrylics but can also be used for wood. To use
this I will need to use 2D design.
Laser cutter:
This is the machine that will help me make the joints or
make different shapes for my clock using plastic. And also
makes shapes like that, it is also used for metal carvings.
WARCO:
This machine is mainly used to turn metal. It is also used to make holes or
inside parts in a product by wood, you can see that it has a lid to cover it, the
clop to clamp the product and the two wheels to move the product around,
the warco machine cuts wood by grinding them there for, for safety reasons
we need a face mask.
STORAGE UNIT
2013/14
Mr. Brazil
Motion machine:
This machine is used for Wood only it is used to make holes and to
make other carvings I think this will be the most helpful machine if I
am going to make wooden joints. I will need eye glasses for
protection.
Motion machine:
This machine is used for mostly metal it is similar
to the laser cutter but it is used to make smooth
nice shapes. I will need a face mask for protection.
The filler:
This machine is used to make smooth edges and it also used to files shapes, you can see
the stand to see the perfect angle for the filer to file. I will need eye glasses for
protection. You can use this machine by pressing a green button and to stop it I will need
to press with my foot to stop it.
STORAGE UNIT
2013/14
Mr. Brazil
Hinges:
Small
Medium
Large
Extra Large
The hinges are the most important part for longer garentee for
my product, the hinges have many uses, one of which we place
them on the back of the product, use the pillar drill to drill just
the right amount, not wanting to make an entire hole, then by
inserting a screw to confirm its placement. The hinge is used
to open and close something in one way. There is a variety of
sizes of hinges (small, medium, large and extra large), the small
hinge is used for small things, I think I am going to most
probably use the small one for the vertical design becausenot
any of the others fit, however for the horizantal one I can use
the range between the small to the large. The extra lage one is
used for very large projects, this is shown because of the
weight of it, and only a large product can stay stable in it and
fit. The dimensions for each are as follows:
Small: 4cm x 2.5cm, Medium: 6cm x 3.5, Large: 10 cm x 4.5,
Extra large: 8cm x 10cm
However these measurments may not be acurate for all of
them, it can change by a couple of millimeters, and for double
checking on my measuring I traced out the shapes, to make
sure.
STORAGE UNIT
Anthropometrics:
Average Hand Size:
Men: Length: 18.9 cm
Width: 8.4 cm
Women: Length: 17.2
Width: 7.4
Source:
2013/14
Mr. Brazil
http://www.theaveragebody.com/average_hand_size.php
Conclusion to Research:
In conclusion to my research, I have developed new ideas by looking at other peoples products, taking ideas, looking at information
including joints, machinery and tools which of I am sure will affect my design greatly, I have also done a different type of research
called anthropometrics, this has helped me determine the width of the trap/bracelet. I have done enough of my research to get me
thinking of what I might want to do, I also know the perspective 29 people from my target audience, which in my opinion will be
enough, I have created a short and simple questionnaire to give me ideas of what they would like. I have concluded some things that
I am going to make which are, I am going to make at least two boxes, I will be using either the dowel joint or the mitre joint, I will
also be making a strap which I still havent decide out of what material, I also know that I am going to use the hinge for at least once
of them.
Developing Ideas:
Design Specification:
My first product will:
Help business people carry their cards around in different places, especially the business men because they
dont use hand bags like then women do.
Keep the cards from spillage for an extent of times.
Keep the cards from falling out.
Keep the cards from getting lost.
Be easy to open.
Be easy to close.
STORAGE UNIT
Be safe.
Have an eye catching design.
Be stable.
Be fixed.
Be easy to use.
Have transparent/semitransparent part/parts to be able to see the cards.
Have curved edges, not to accidentally hurt the target audience.
Keep the cards clean.
Will be smooth and straight.
Design Ideas:
Draw/scan and enter 4 design ideas here. Analyze each design before you scan them.
2013/14
Mr. Brazil
Design 2:
Design 3:
STORAGE UNIT
2013/14
Mr. Brazil
Design 4:
STORAGE UNIT
2013/14
Mr. Brazil
STORAGE UNIT
2013/14
Mr. Brazil
Design 2:
Design 3:
STORAGE UNIT
2013/14
Mr. Brazil
Design 4:
STORAGE UNIT
2013/14
Mr. Brazil
Designs
Target audience
for the
Mirna Ibrahim
st
1Name:
product
1
Yes
I think that this design
would meet my target
audiences needs because
it is both colorful and small.
Function
Size
STORAGE UNIT
Location
2013/14
Environmental
aspects
Mr. Brazil
Yes
It meets its
function in
storing cards.
No
It is not big
enough for two
different sets of
cards.
Yes
It can be placed in
a car and can be
placed on a desk.
No
I only used
acrylic
Yes
I think that this design
would meet my target
audiences needs because
it is both colorful and small.
Yes
It meets its
function in
storing cards.
No
It is not big
enough for two
different sets of
cards.
Yes
It can be placed in
a car and can be
placed on a desk.
Yes/No
I used very little
of wood
Yes
I think that this design
would meet my target
audiences needs because
it is both colorful and small
enough for two cards; it
also has artistic designs on
it.
Yes
I think that this design
would meet my target
audiences needs because
it is both colorful and small
enough for two cards; it
also has artistic designs on
it.
Yes
It meets its
function in
storing cards.
Yes
It is big enough
for two sets of
cards.
And for a lot of
cards in the
sets.
Yes
It can be placed in
a car and can be
placed on a desk.
Yes
I used wood and
acrylic almost
evenly.
Yes
It meets its
function in
storing cards.
Yes
It is big enough
for two sets of
cards.
And for a lot of
cards in the
sets.
Yes
It can be placed in
a car and can be
placed on a desk.
Yes
I used wood and
acrylic almost
evenly.
Target audience
Function
Size
Location
Environmental
aspects
Yes
I think that this design
would meet my target
audiences needs because
it is both colorful and small
enough for two cards; it
also has artistic designs on
it.
Yes
I think that this design
would meet my target
audiences needs because
it is both colorful and small
enough for two cards; it
also has artistic designs on
it.
Yes
It meets its
function in
storing cards.
No
It is not big
enough to one
card because
the cards could
get jammed.
Yes
It can be placed in
a car and can be
placed on a desk.
Yes
I used wood and
acrylic almost
evenly.
Yes
It meets its
function in
storing cards.
Yes
It is big enough
to one card and
thick enough to
hold several
cards.
Yes
It can be placed in
a car and can be
placed on a desk.
Yes
I used wood and
acrylic almost
evenly.
Designs
for the
2nd
product
1
Yes
I think that this design
would meet my target
audiences needs because
it is both colorful and small
enough for two cards; it
also has artistic designs on
it.
Yes
I think that this design
would meet my target
audiences needs because
it is both colorful and small
enough for two cards; it
also has artistic designs on
it.
Final Design:
First product final design:
STORAGE UNIT
2013/14
Mr. Brazil
Yes
It meets its
function in
storing cards.
Yes
It is big enough
to one card and
thick enough to
hold several
cards.
Yes
It can be placed in
a car and can be
placed on a desk.
Yes
I used wood and
acrylic almost
evenly.
Yes
It meets its
function in
storing cards.
Yes
It is big enough
to one card and
thick enough to
hold several
cards.
Yes
It can be placed in
a car and can be
placed on a desk.
Yes
I used wood and
acrylic almost
evenly.
STORAGE UNIT
Orthographic view:
2013/14
Mr. Brazil
STORAGE UNIT
2013/14
Target audience
Function
Size
Location
Yes
I think that this design would meet
my target audiences needs
because it is both colorful and
small enough for two cards; it also
has artistic designs on it.
Yes
I think that this design would meet
my target audiences needs
because it is both colorful and
small enough for two cards; it also
has artistic designs on it.
Yes
It meets
its
function
in storing
cards.
Yes
It meets
its
function
in storing
cards.
Yes
It is big enough for
two sets of cards.
And for a lot of
cards in the sets.
Yes
It can be placed
in a car and can
be placed on a
desk.
Yes
It is big enough to
one card and thick
enough to hold
several cards.
Yes
It can be placed
in a car and can
be placed on a
desk.
Mr. Brazil
Environmental
aspects
No
I used wood and
acrylic, however
acrylic is used
more than
wood.
No
I used mostly
wood but I used
a little bit of
acrylic.
Dimensions:
140mm x 160mm x 3mm
130mm x 110mm x 3mm
130mm x 110mm x 3mm
Quantity:
1
1
1
Sides
Ends
Bottom
Bottom design
Material:
Timber- Pine
Timber- Pine
Semi- transparent red
acrylic
Timber- Pine
Timber- Pine
Timber- Pine
Timber- Pine
2
1
1
1
Bottom acrylic
STORAGE UNIT
2013/14
Mr. Brazil
acrylic
Product 1- Inside box
Part:
Bottom
Sides
Ends
Divider
Material:
Clear acrylic
Clear acrylic
Clear acrylic
Clear acrylic
Dimensions:
140mm x 130mm x 3mm
130mm x 50mm x 3mm
140mm x 150mm x 3mm
40mm x 105mm x 5mm
Quantity:
1
2
2
1
Product 2Part:
Top
Material:
Timber- Pine
Dimensions:
113mm x 75mm x 3mm
Quantity:
1
Top design
Timber- Pine
Top design
Layers (sides)
Layers (end)
Timber- Pine
Bottom
Timber- Pine
Dowel sticks
Timber- Pine
12mm x 5mm
Plan of Manufacture:
Final product
The outside
box
STORAGE UNIT
2013/14
Mr. Brazil
STORAGE UNIT
2013/14
Mr. Brazil
Evaluation:
Evaluation of my final design against the Design specification:
Specification
Achieved
How
Achieved
Achieved
Achieved
Achieved
Achieved
Achieved
Achieved
Achieved
Achieved
Be easy to open.
Not Achieved
Be easy to close.
Achieved
Achieved
Be stable.
Achieved
Be fixed.
Achieved
It is fixed.
Have transparent/semitransparent
part/parts to be able to see the cards.
Achieved
Not Achieved
Not Achieved
STORAGE UNIT
2013/14
Mr. Brazil
Achieved
Target Audience
Achieved
Function
Achieved
Size
Achieved
Location
Achieved
Environmental aspects
Achieved
Imp
STORAGE UNIT
2013/14
Mr. Brazil
My end user is my mum, and she used this product to benefit her in many ways (shown in the pictures above), she used
it on her desk to keep all her very important things where she would need regularly, for example her stationary and
business cards, This impacted my mothers work aqlot because she know can keep everything organized and instead of
taking more time to look for the things that she needs she can put them in an eye catching box that reminds her where
they are and this keeps them from being lost. My mum also found other uses for this product as I mentioned before for
stationary.
How I tested my
final product
I gathered a lot of
cards and put as
many as I could
without having the
cards overlapping on
one of the sides.
Was it
successful
Yes
Evaluation
For this particular
test my final
product was
successful because
the cards did hold
300 cards in total
without over flow.
Evidence
STORAGE UNIT
No
Is it stable
on the
table?
I tested it by placing
it on the table and
looking at the way it
was open and
closed.
No
Are the
cards
easily
accessible?
I tested this by
asking my end user
to put her fingers
through the holes
and next to both of
the stacks.
Yes
Do the
cards fall
out?
Do the
cards stay
clean?
Do the
cards get
bent or
damaged
in any
way?
No
Yes
2013/14
Mr. Brazil
STORAGE UNIT
Yes
Is the size
good?
Yes
Is the size
of the
inside
good to
match
with the
outside
box?
No
2013/14
Mr. Brazil