Professional Documents
Culture Documents
IEE Tutorial 1
IEE Tutorial 1
IEE Tutorial 1
Page 1
5. Determine the current through each resistor and voltage through the labeled nodes with
respect to ground in the ladder circuit given below.
Page 2
9. The circuit of Figure is referred to as a bridge circuit and is used extensively in electronic
and scientific instruments.
Page 3
11. For the circuit, find the indicated currents and voltages., I1,I2 and Vab
Page 4
14. If all the resistors of the cube in Fig are 10 ohms, what is the total resistance? (Hint:
Make some basic assumptions about current division through the cube.)
Page 5
16. Using Y-Delta or Delta -Y conversions, determine the total resistance of the network.
Page 6