In-Line Carbonation, Decarbonation and Deoxygenation System

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

CRS

In-line Carbonation, Decarbonation


and Deoxygenation System

The CRS system is a modular, fully automatic system for carbonation,


decarbonation and deoxygenation of beer. Hollow fibre contactors enable
the direct transmission of CO2 in or out of beverages without any loss or
foaming. Due to the contactor design the flow rate can be varied from no
flow up to max. specified capacity. The advantages of the system are the
easy upgrading of capacity by adding contactors, maintenance free, full
automatic operation and a small footprint.

Gesellschaft fr Labor und Prozemetechnik mbH

Technical data:

Technical description:

Capacity:
10- 1500 hl/h
Measuring/Control range:
0-10 g/l ( 0-5 vol% ) CO2
Control accuracy:
0,05 g/l ( 0,025 vol% ) CO2
CO2-(N2-) consumption:
5-15 (2,5-7,5) Nl per 1 hl decarbonated beer
Operating & Cleaning temperatures:
operation: 0C - +20C
CIP: max. 85C
Operating pressures:
0 - 6 bar
Nominal diameters:
DN 25- DN 150 [mm]
Materials:
AISI 304(1.4301)/Polypropylene other on
request
Optional:
-booster pump
-sealing water recovery
-pressure holding valve
-sterile filter for CO2
-remote access service kit
-O2 measurement

The CRS system is a modular constructed


carbonation, decarbonation and deoxygenation
unit. Highly efficient contactors, so-called Hollow
fibre membrane modules enable the transmission
of CO2 into or out of beverages. Due to the special
material of the fibre it is only permeable for gas
molecules.
The driving force of the gas diffusion into /
removal out of beverage is the partial pressure
difference between the gas and liquid phase. The
gas molecules are only driven by partial pressure
difference directly into / out of solution. This
enables bubble free carbonation at the contact
point (membrane) of gas - liquid and decarbonation with highest efficiency combined with
a reduction of the O2-content in the beverage.
The CO2-concentration of the final product is
controlled continuously by a highly accurate inline CO2-analyser.
An optional remote access service kit allows
software updating and trouble shooting within a
few hours.

Flowdiagram: CRS

Centec supplies:
-Yeast Pitching Systems
-Wort Aeration Systems
-Water Deaeration Systems
-High Gravity Blending Systems
-Carbonation Systems
-Nitrogenation Systems
-Carbonation, Decarbonation and Oxygen
Reduction Systems
-Flash Pasteuriser
-In-line quality analysis by the MCM
-Package Analyser for the Lab./ Process
-Laboratory beer analyser

Centec
Gesellschaft fr Labor und
Prozemetechnik mbH
Wilhelm-Rntgen-Str. 10
D-63477 Frankfurt-Maintal
Tel.: +49-(0)6181 1878-0
FAX.:+49-(0)6181 1878-50
E-mail: info@centec.de
Internet: http://www.centec.de

represented by:

You might also like