Professional Documents
Culture Documents
Eg - Ge6152
Eg - Ge6152
NO:
PMR ENGINEERING COLLEGE
An ISO 9001-2008 Certified Institution
Approved By AICTE, New Delhi and Affiliated To Anna University
DEPARTMENT OF MECHANICAL ENGG
SUBJECT
: ENGINEERING GRAPHICS
SUB. CODE : GE 6152
DATE
:
MAX MARKS: 60
YEAR/ SEM : I/I
1. Construct a hyperbola when the distance between the focus and directrix is 45 mm
and eccentricity is 5/4. Also draw the tangent and normal to any point on the curve.
(OR)
2. Construct a parabola when the distance between the focus and directrix is 30mm.
Also draw the tangent and normal to any point on the curve.
3. Draw the Involute of a circle of radius 20mm. Also draw the tangent and normal at
any point on the curve
(OR)
4. Construct a cycloid given the radius of the generating circle is 30mm. also draw a
tangent and normal at any point on the cycloid.
5. Draw the three orthogonal views for the following fig.
(OR)
6. Draw the three orthogonal views for the following fig.