Professional Documents
Culture Documents
Catalog Cameron
Catalog Cameron
Catalog Cameron
A B L E
Introduction
Features & Benefits
Cameron Ball Valves
Cameron Welded Body
Cameron Bolted Body
Cameron Standard & Alternative Seats
Cameron Sphere Launcher & Accessories
CONTACT
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
O F
O N T E N T S
HELP
N T R O D U C T I O N
CONTACT
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
A history of accomplishment
Many of our industrys most important
product features have been designed by
Cooper Cameron engineers. From the
famous W-K-M through-conduit expanding gate valve (1933) to Cameron allwelded, forged body ball valves (1960),
W-K-M deep-pocketed seat ball valves
HELP
(p4)
E L D E D
O D Y
A L L
CAMERON
A L V E S
Compressor stations
CO2 services
Offshore
Subsea
The distinctive design of the
Cameron Welded Body Ball Valve gives
it maximum strength at minimum weight
as well as maximum resistance both to
pipeline pressures and stresses. The
compact, spherical design also eliminates
body flanges, thus reducing overall size
and leak paths.
CONTACT
PTFE lip seal.
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
HELP
SD-7669-96
(p5)
E L D E D
O D Y
A L L
CAMERON
A L V E S
Features/Benefits
Stem seals
Delta and lip seals made of PTFE are
incorporated in the upper stem area.
PTFE is a low friction, non-deteriorating
material that is not subject to rapid
decompression explosion. Most valve
sizes have a provision for the injection
of sealant to establish a secondary seal.
CONTACT
B
CONTENTS MENU
Valve Open
TECHNICAL DATA
Valve Closed
www:
CONTACT
SPECIFICATIONS
HELP
Sizes
Body Styles
2"- 56"
All welded
Standard Materials
Pressure Classes
Optional Materials
Operating Temperatures
End Connections
(NACE MRO1-75).
(p6)
O L T E D
O D Y
A L L
CAMERON
A L V E S
CONTACT
Backseated stem.
Body bleed fitting allows
double block and bleed
testing of valve seals in
either open or closed
position.
Gas transmission
Natural gas storage
Dryer service
NGL plants
NGL pipeline
Compressor stations
CO2 services
Offshore
Subsea
Diverters
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
HELP
(p7)
O L T E D
O D Y
A L V E S
CAMERON
Features/Benefits
A L L
Stem seals
A backseated stem and three stem seals
are incorporated in the upper stem area.
One is a PTFE gasket and two are
O-rings. Valve sizes 6" and larger can
be provided with a provision for the
injection of sealant to establish a secondary seal.
A
CONTACT
CONTENTS MENU
Valve Open
TECHNICAL DATA
Valve Closed
www:
CONTACT
SPECIFICATIONS
Sizes
Standard Materials
2"- 56"
Optional Materials
Pressure Classes
Operating Temperatures
(NACE MRO1-75).
End Connections
Flanged, weld, weld-by-flange
Body Styles
HELP
(p8)
T A N D A R D
E A T
CAMERON
R R A N G E M E N T S
CONTACT
SD-7808
CONTENTS MENU
Line
Pressure
Trapped Line
Pressure
Escaping
Pressure
TECHNICAL DATA
SD-24087
www:
CONTACT
Prevents build up
In some services a valve can experience
harmful sediment build up around the seat
ring. This can cause the seat to stick and
not seal properly. The Cameron ball valve
with the exclusive rotating seat can handle these harsher services. As the seat
rotates it will break up or prevent any
build up.
HELP
(p9)
L T E R N A T I V E
E A T
CAMERON
R R A N G E M E N T S
Designed to accommodate a
variety of applications and preferences, the double acting and
metal-to-metal seat arrangements
are available on both the Welded
body and Bolted body styles
shown on the preceding pages.
Double Acting
Conventional upstream sealing
With the upstream pressure, the bi-directional body-to-seat seal is pushed toward
the front sealing face of its retaining
pocket. This creates an unbalanced pressure annulus between the body seal and
the inside diameter of the seat insert, forcing the metal seat against the ball.
CONTACT
Downstream sealing
With the downstream pressure, the bidirectional body-to-seat seal is pushed
toward the back sealing face of its retaining pocket. This creates an unbalanced
pressure annulus between the outside
diameter of the seat insert and the body
seal diameter, also forcing the seat insert
against the ball.
CONTENTS MENU
Metal-to-Metal
TECHNICAL DATA
www:
CONTACT
Elastomer seal
A small elastomer seal held by the seat
ring performs two services. It wipes the
surface of the ball to prevent surface
damage while providing a bubble-tight
seal at low pressures.
SPECIFICATIONS
Double Acting - T32
HELP
SPECIFICATIONS
Sizes
Sizes
8" - 42"
6"- 48"
Pressure Classes
Pressure Classes
Operating Temperatures
Operating Temperatures
(p10)
L I N E
P H E R E
CAMERON
A U N C H E R
Features/Benefits
Field preferred
The speed and ease of the Cameron
launching system make it the preferred
method among field personnel.
Cost effective
The launchers unique design greatly
reduces the cost of constructing a launching system. This design combines three
valves into one. A conventional design
requires a main line block, launching, and
kicker valve. The Cameron In-line
launcher does the job of both the main
line block, and launching valve. The pig
is inserted directly into the main flow line
eliminating the need for a kicker valve.
Eliminating the need for two valves related piping and supports produces an overall cost savings.
CONTACT
Easy installation
LAUNCHING SEQUENCE
(TOP VIEW)
1. Valve is closed.
2. Valve body is vented.
3. Hinged door opens to load
sphere.
TECHNICAL DATA
www:
CONTACT
HELP
8. Spherical pig in launch position.
(p11)
CAMERON
C C E S S O R I E S
CONTACT
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
HELP
(p12)
Y N A
370CT
E A L
R U N N I O N
A L L
A L V E S
Features/Benefits
W-K-M
CONTACT
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
HELP
(p14)
Y N A
370CT
E A L
R U N N I O N
A L L
W-K-M
A L V E S
Actuation-friendly
A variety of actuator types can be easily
installed including pneumatic, hydraulic,
diaphragm, vane, electro-mechanical and
electro-hydraulic. Cooper Cameron Valves
can provide a total package of valves and
actuators to meet your needs.
CONTACT
B
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
SPECIFICATIONS
PRINT
Actuator mounting
bracket for 4"- 8"x 6"
valves (Optional)
Actuator mounting
bracket for 8"-14"x
12" valves (Standard)
Sizes
Body Styles
Two-piece
Standard Materials
Pressure Classes
NACE MR-01-75
Operating Temperatures
Optional Materials
End Connections
Flanged
HELP
(p15)
Features/Benefits
Pressure-actuated seats
This valve uses pressure-actuated seats
with locked-in non-metallic face seals.
Integral actuator
mounting flange
CONTACT
W-K-M
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
Field repairable
2 piece body
HELP
(p16)
W-K-M
Integral actuator
mounting flange.
Field repairable
The split body design permits complete
repairs to be made in the field without
special tools.
Positively retained stem
To ensure safety, all DynaSeal 370D4 ball
valves feature a positively retained stem.
Indicator handle
When the handle is aligned with the pipe,
the valve is open. When the handle is perpendicular to the pipe, the valve is closed.
CONTACT
Design standards
ANSI B16.34 - Design Standard. ANSI
B16.5 - Steel Pipe Flanges and Flange
Fittings. API 6D - Specification for
Pipeline Valves. API 6FA - Fire Test
Specification. These DynaSeal 370D4 Ball
Valves meet the following: MSS-SP-6
standard finishes for pipe flanges, MSSSP-25 standard marking system for valves,
MSS-SP-55 quality standards for steel
castings.
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
Field repairable
2 piece body
SPECIFICATIONS
Sizes
Optional Materials
Pressure classes
Other Options
Operating Temperatures
End Connections
Flanged
Body Styles
Two-piece
Standard Materials
Carbon steel
HELP
(p17)
D Y N A S E A L 3 7 0 D 4 6 " - 1 4 " T R U N N I O N B A L L V A L V E S
Features/Benefits
W-K-M DynaSeal 370D4 ball valves satisfy a wide range of ANSI and API 6D
applications. They may be specified in
sizes from 6" to 14"x12" and pressure
classes of 600 and 900.
Engineered for heavy duty, maintenance-free performance and manufactured
in a variety of body and seal materials,
the DynaSeal 370D4 is commonly selected for many specialized applications.
Bi-directional flow
This valve uses pressure-actuated seats
with locked-in non-metallic face seals. To
assure tight sealing at low pressures, special wave springs force the seats against
the ball. At higher pressures, the upstream
seat is forced against the ball by the pressure working across the differential
between the area of the seat insert and the
seat O-ring. The higher the pressure, the
tighter the seal.
W-K-M
CONTACT
Standard adapter flange
for ease of automation.
Pressure-actuated seat
provides positive seal
under all conditions.
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
HELP
SD-11348
(p18)
D Y N A S E A L 3 7 0 D 4 6 " - 1 4 " T R U N N I O N B A L L V A L V E S
Bi-directional flow
CONTACT
W-K-M
Seat
injection
fitting
Design standards
ANSI B16.34 - Design Standard. ANSI
B16.5 - Steel Pipe Flanges and Flange
Fittings. API 6D - Specification for
Pipeline Valves. API 6FA - Fire Test
Specification. The DynaSeal 370D4
meets the following: MSS-SP-6 standard
finishes for pipe flanges, MSS-SP-25
standard marking system for valves,
MSS-SP-55 quality standards for steel
castings.
Fire tested for safety
All DynaSeal 370D4 valves are qualified
under API standard 6FA.
CONTENTS MENU
TECHNICAL DATA
Actuation-friendly
A variety of actuator types can be easily
installed. Cooper Cameron Valves can
provide a total package of valves, actuators or mounting plates to accommodate
actuation.
SPECIFICATIONS
See pages 97 and 99 for technical
specifications.
www:
Sizes
6" - 12" full bore
Excess body
pressure
CONTACT
HELP
(p19)
Y N A
370E4
E A L
R U N N I O N
A L L
Features/Benefits
W-K-M
A L V E S
CONTACT
Stem is positively retained,
cannot be removed with
valve in service.
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
Pressure-actuated seat
provides positive seal
under all conditions.
HELP
(p20)
Y N A
370E4
E A L
R U N N I O N
A L L
seat is forced against the ball by the pressure working across the differential
between the area of the seat insert and the
seat O-ring. The higher the pressure, the
tighter the seal.
CONTACT
Pressure
activated
seat
TECHNICAL DATA
C springs for
low pressure
sealing
CONTENTS MENU
W-K-M
A L V E S
www:
CONTACT
SPECIFICATIONS
Sizes/Classes
End Connections
Body Styles
Stop
plate
Stop
pin
One-piece
Class 2500 -
Standard Materials
NACE MR-01-75
Optional Materials
Special trims available upon request.
Operating Temperatures
From -50F to +350F
HELP
(-46C to +176C)
D
(p21)
D Y N A S E A L 3 1 0 C 2 - P I E C E F L O A T I N G B A L L V A L V E S
CONTACT
CONTENTS MENU
W-K-M
available trims offer the versatility needed to handle the wide variety of products
used in the refining process.
High temperature service
Special high temperature trims are available for DynaSeal 310 ball valves which
provide for service to 600F (316C).
This trim is excellent for steam service,
hot oil, heat transfer fluids, boiler feedwater and similar applications.
Low temperature service
Standard trims accommodate temperatures
to -20F (-29C). For temperatures to
-50F (-46C); please consult the factory.
Packing can be
adjusted or replaced
without removing
valve from line.
TECHNICAL DATA
www:
CONTACT
HELP
(p22)
D Y N A S E A L 3 1 0 C 2 - P I E C E F L O A T I N G B A L L V A L V E S
Features/Benefits
Deep recessed seats
The seat is recessed into a deep machined
pocket, which serves to surround and protect the seat on all sides. This design
eliminates cold flow into the valve conduit
where it can be damaged by the action of
CONTACT
Deep recessed seats
Indicator handle
The design of the handle permits installation on the stem in the correct position
only in alignment with the ball port.
When the handle is aligned with the pipe,
the valve is open. When the handle is perpendicular to the pipe, the valve is closed.
CONTENTS MENU
TECHNICAL DATA
www:
W-K-M
Maintenance-free performance
Under most conditions, the DynaSeal 310
floating ball valve will provide years of
trouble-free service with no maintenance
required. In some severe applications,
such as handling extremely abrasive slurries at high temperatures, it may be necessary to replace the seats occasionally.
Seat and seal kits are available and
replacement can be done easily with
ordinary tools.
Fire-tested for safety
All DynaSeal 310C valves are qualified
under API standard 607. The pocketed
seat and locked-in stem design contributes to its excellent fire tested
characteristics. Should the soft seats be
destroyed by fire, the ball floats downstream, providing a tight metal-to-metal
seal against the lip of the seat pocket. If
the tailpiece seals are destroyed, the
metal-to-metal tailpiece body connection
retards external leakage.
Actuation-friendly
A variety of actuator types can be easily
installed, including pneumatic, hydraulic,
diaphragm, vane, electro-mechanical and
electro-hydraulic. Cooper Cameron
Valves can provide a total package of
valves, actuators, and support services
to meet your needs.
CONTACT
SPECIFICATIONS
PRINT
Actuator mounting
bracket for 4"- 8"x 6"
valves (Optional)
Actuator mounting
bracket for 8"-14"x
12" valves (Optional)
Sizes
Standard Materials
Working Pressures
and monel
Operating Temperatures
End Connections
HELP
C
(p23)
D Y N A S E A L 3 1 0 C 3 - P I E C E F L O A T I N G B A L L V A L V E S
CONTACT
W-K-M
Features/Benefits
Deep seats
The seat is recessed into a deep machined
pocket, which serves to surround and
protect the seat on all sides. This design
eliminates cold flow into the valve
conduit where it can be damaged by the
action of the ball or the flow medium. The
result is an extremely long service life.
Stem is positively
retained, cannot
be removed with
valve in service.
CONTENTS MENU
Packing can be
replaced without
removing valve
from line.
TECHNICAL DATA
Packing adjustment
screws and bonnet cap
retain compression ring
and packing.
www:
Flanged, threaded or
socket weld ends.
CONTACT
HELP
(p24)
D Y N A S E A L 3 1 0 C 3 - P I E C E F L O A T I N G B A L L V A L V E S
CONTACT
CONTENTS MENU
Maintenance-free performance
Under most conditions, the DynaSeal
floating ball valve will provide years of
trouble-free service with no maintenance
Pressure here
TECHNICAL DATA
W-K-M
www:
SPECIFICATIONS
CONTACT
Sizes
Standard Materials
Working Pressures
and monel
to 2" R
Operating Temperatures
and fluoroelastomer
Optional Materials
End Connections
Body Styles
1/2" F to 2" R
3 Piece
HELP
DynaSeal 310C 3-piece Flanged
(p25)
Y N A
E A L
310D
CONTACT
L O A T I N G
A L L
Features/Benefits
Adjustable replacement packing
Stem packing can be adjusted while the
valve is in service.
Static grounding/body bleed port
The 310D ball valve can be supplied with
a static grounding device. A body bleed
port option is also available.
CONTENTS MENU
W-K-M
A L V E S
TECHNICAL DATA
www:
CONTACT
Unibody construction.
Removable
seat retainer.
HELP
SD-11347-96
(p26)
Y N A
E A L
310D
TEFLON
gasket
CONTACT
Metal
Shoulder
B
Pressure here
Teflon seals
In the unibody design, a Teflon body joint
gasket protects the body insert threads
from corrosion by the flow medium. In
the two piece valve design, a Teflon gasket ensures a tight seal between the body
and tailpiece. There are no O-rings used
in the WKM 310D design.
Indicator handle
The design of the handle permits installation on the stem in the correct position
onlyin alignment with the ball port.
When the handle is aligned with the pipe,
the valve is open. When the handle is perpendicular to the pipe, the valve is closed.
www:
SPECIFICATIONS
D
W-K-M
A L V E S
TECHNICAL DATA
CONTACT
A L L
Conical Seat
CONTENTS MENU
L O A T I N G
Maintenance-free performance
Under most conditions, the DynaSeal
310D floating ball valve will provide
years of trouble-free service with no
maintenance required. In some severe
applications, such as handling extremely
abrasive slurries at high temperatures,
it may be necessary to replace the seats
occasionally. Seat and seal kits are
available and replacement can be done
easily with ordinary tools.
Actuation-friendly
A variety of actuator types can be easily
installed, including pneumatic, hydraulic,
diaphragm, vane, electro-mechanical and
electro-hydraulic. Cooper Cameron Valves
can provide a total package of valves,
actuators, and support services to meet
your needs.
Sizes
Optional Materials
Pressure Class
Standard Materials
HELP
p27)
Y N A
E A L
210A
L O A T I N G
A L L
W-K-M
A L V E S
design features found in the W-K-M carbon steel 310C and 310D ball valves. It
is available in 1" to 4"x3" sizes. Working
pressures offered are 1,000, 1,500 and
2,000 psi. Maximum pressure ratings are
2000 psi, 1" to 3"x2" valves, and 1500
psi for the 3"x3" and 4"x3" valves. This
valve is primarily used in the Oilfield
market, typically chosen for the following
applications:
Production wing valves on low pressure gas wells
Production flow lines
Production gathering systems for water,
Features/Benefits
Locking capability is standard
To ensure safety, the valve can be locked
in the open or closed position.
Positively retained stem
The stem is back-seated and positively
retained. It is designed to prevent stem
blowout while the valve is in service.
CONTACT
CONTENTS MENU
Open or closed position locking
handle accommodates popular
padlock designs.
TECHNICAL DATA
Recessed deep
pocket seat is
protected from
flow.
www:
CONTACT
HELP
(p28)
Y N A
210A
E A L
L O A T I N G
A L L
CONTACT
A
CONTENTS MENU
W-K-M
A L V E S
TECHNICAL DATA
www:
CONTACT
SPECIFICATIONS
HELP
Sizes
Optional Materials
Pressures
Standard Materials
Seat/seals: Delrin/Buna-N
(25)
Y N A
E A L
210F
CONTACT
L O A T I N G
A L L
W-K-M
A L V E S
of applications in the oil and gas gathering and field processing applications
including NACE MR-01-75.
Oil and gas production
Many oil and gas processing units are in
remote locations where reliability is the
first consideration. Thats why DynaSeal
valves are the first choice of production
engineers in many oil companies. In addition, DynaSeals meet the extra heavyduty standards of the petroleum industry.
Sour oil and gas service
DynaSeal ball valves have served for
years in gathering lines, manifolds, and
field processing units in sour oil and gas
Features/Benefits
Deep seats
The seat is recessed into a deep machined
pocket, which serves to surround and protect the seat on all sides. This design
eliminates cold flow into the valve conduit
where it can be damaged by the action of
the ball or the flow medium. The result is
an extremely long service life.
Teflon seals
A Teflon body joint gasket protects the
tailpiece threads from corrosion by the
flow media.
CONTENTS MENU
Recessed deep
pocket seat is
protected from
flow.
TECHNICAL DATA
www:
CONTACT
HELP
(p30)
Y N A
E A L
210F
L O A T I N G
A L L
W-K-M
A L V E S
CONTACT
CONTENTS MENU
Indicator handle
When the handle is aligned with the pipe,
the valve is open. When the handle is perpendicular to the pipe, the valve is closed.
TECHNICAL DATA
Maintenance-free performance
Under most conditions, the DynaSeal 210f
floating ball valve will provide years of
trouble-free service with no maintenance
required. However, seat and seal kits are
available for replacement if necessary.
www:
CONTACT
Actuation-friendly
A variety of actuator types can be easily
installed, including pneumatic, hydraulic,
diaphragm, vane, electro-mechanical and
electro-hydraulic. Cooper Cameron
Valves can provide a total package of
valves and actuators to meet your needs.
SPECIFICATIONS
Sizes
Body Styles
3-piece
Standard Materials
Working Pressures
Carbon steel
Optional Materials
Operating Temperatures
steel trims.
End Connections
Flanged
HELP
(p31)
D J U S T A B L E
CONTACT
T H O R N H I L L C R AV E R
H O K E S
Features/Benefits
Coupling vs. threads for safety
The UNIBOLT coupling between the
body and yoke provides a higher degree
of safety than conventional threads or
flanges due to the greater amount of metal
in shear. There are no threaded or flanged
connections between component parts,
and the adjustable choke may be dismantled quickly for change of stem seats.
CONTENTS MENU
TECHNICAL DATA
PLUGLOK allows pressure
release, ensures safety.
www:
CONTACT
HELP
(p33)
D J U S T A B L E
CONTACT
CONTENTS MENU
T H O R N H I L L C R AV E R
H O K E S
compounded with Teflon requires no lubrication. The stem seat and gasket can easily
be removed for inspection and replacement
if necessary.
For added safety, the stem can only be
removed through the bottom of the yoke
hub assembly.
Stem ring for safety
A no-go ring is an integral part of the
tip end to prevent separation of the stem
and the bonnet assembly in the event that
thread deterioration causes the stem to
release in an upward motion.
Variety of end connections available
Threaded; UNIBOLT Line Pipe or butt
weld; flanged API or ANSI connections
are available. Chokes may be ordered with
combined end connections, and other
manufacturers end connections are also
available. Typically, other than threaded,
the most economical is a choke body with
UNIBOLT connections.
Two seal designs utilized
The ring-groove seal is a mechanical-type
seal requiring tightening of the unit to
effect a seal. The taper-type seal is selfenergizing under pressure in both directions
and secures between the yoke and body.
On both seal types, the yoke member pilot
fits snugly into the body, centers the stem
in the seal and minimizes vibration.
TECHNICAL DATA
A
www:
CONTACT
Styles
Standard Adjustable Choke
Stem and Seat Adjustable Chokes are
designed for high performance in critical
applications such as gas wells with high
pressure drops, abrasive flow and corrosive conditions.
Long Nose Heater Adjustable
Choke
When installed on an indirect heater,
with the outlet end of the elongated
choke body fastened directly to the tube
bundle, the choke seat area is completely
surrounded by the hot water which is
primarily used to heat the tubes. The heat
generated in this manner has a beneficial
effect in minimizing the severe refrigerating action resulting from metering high
pressure natural gas.
Force Balanced Adjustable Choke
Designed to handle high-pressure, highvolume applications, it employs an innovative force-balanced arrangement which
allows for very low operating torque.
Adjustable Steam Choke
Designed for use in steam injection and
other high-temperature applications up
to 800F.
SPECIFICATIONS
PRINT
C
Sizes
Material Options
stainless steel
Pressure Ratings
End Connections
Threaded, UNIBOLT Line Pipe, UNIBOLT
butt weld, flanged API or ANSI
HELP
D
(p34)
O S I T I V E
CONTACT
CONTENTS MENU
T H O R N H I L L C R AV E R
H O K E S
Wellheads
Well testing
Manifolds
Process facilities
The UNIBOLT coupling between
the blanking plug and the body is a
unique design feature that ensures
superior reliability and safety over other
methods. The connection is made by
means of the UNIBOLT interlocking
shelf design rather than by conventional
threads or flanges.
Features/Benefits
Coupling vs. threads for safety
The UNIBOLT coupling between the
body and blanking plug provides a higher
degree of safety than conventional
TECHNICAL DATA
www:
CONTACT
HELP
(p35)
O S I T I V E
T H O R N H I L L C R AV E R
H O K E S
SPECIFICATIONS
See page 142 for technical specifications.
Sizes
2" chokes: bean ID 1/64" to 1"
3" chokes: bean ID 1/64" to 2"
Pressure Ratings
2,000 psi to 20,000 psi
CONTACT
End Connections
Threaded, UNIBOLT line pipe, UNIBOLT
butt weld, flanged API or ANSI
Material Options
Body: alloy steel or 12% chrome
stainless steel
Flow beans: alloy steel, 12% chrome
stainless steel. Tungsten carbide and
ceramic inserts available
CONTENTS MENU
U N I B O LT S T E E L C O U P L I N G S
Maximizing leverage for strong
connections, Thornhill Craver
UNIBOLT Couplings are the
high-pressure, compact and
lightweight alternative to API
or ANSI flanges for piping
systems.
TECHNICAL DATA
SPECIFICATIONS
See page 142 for technical spec.
1
Sizes
1" to 6"
5
Pressure Ratings
Up to 15,000 lbs CWP
End Connections
www:
CONTACT
HELP
All steel
Optional Materials
Corrosion-resistant
materials available.
the bolt force approximately 6-1/2
times as it is transmitted to the seal
ring. This force is further multiplied
3.2 times by the 18 included angle
in the ring and groove seals. Since
the helical angle is self-locking, the
bolt is under no stress after the
initial tightening.
5 Seal ring squeezes tightly between
Nut
Member
Plain
Hub
Seal
Ring
Lug
Hub
Bolt
SD-10894
(p36)
D-S
E A L
A T E
FOSTER
A L V E S
CONTACT
Motor/BGO
mounting flange
CONTENTS MENU
Rising stem.
Stem backseat.
(In fully open position)
Directional self-energized
stem seals.
TECHNICAL DATA
Block and bleed
test fitting.
www:
Slab gate.
Secondary seat.
CONTACT
One-piece cast body resists
pipeline bending moments.
Primary seat.
Full-bore through-conduit
design eliminates turbulence.
HELP
Body drain fitting.
C1326
(p38)
D-S
E A L
A T E
FOSTER
A L V E S
Features/Benefits
Secondary Seat
Belleville Spring
Primary Seat
Redundant seals
Multiple backup seals are used in every
critical area: two independent seats on
each side of gate, three seals in the stem
sealing area, which includes back seat
capability in the fully open position.
Direction of Flow
Gate
Valve Conduit
Through-conduit design
The full round bore makes it possible
to run pigs, scrapers or hot tap cutters
without damaging the valve, lodging the
scraper, or jamming it with metal cuttings.
Valve Body
A
Gate Bore
C1009
Valve Conduit
Gate
CONTACT
Valve Body
B
Gate Bore
CONTENTS MENU
Lower
Valve Conduit Pressure
Valve Body
TECHNICAL DATA
C
Gate Bore
Higher
Valve Body Cavity Pressure
www:
C1011
One-Piece
Stem
Stem
Directional
Self-Energized
Seals
CONTACT
Totally bidirectional
Seals in either direction, which in some
cases can eliminate valves used in tandem.
Lantern Ring
SPECIFICATIONS
Sizes
End Connections
Injection Port
2" - 40"
Backseat
Pressure Classes
Body Styles
Unibody
Operating Temperatures
Optional Materials
(-29C to + 121C)
C1012
Gate
(-29C to + 204C)
Anhydrous ammonia service:
-20F to +250F (-29C to + 121C)
Geothermal service:
HELP
(p39)
O W
-R-S
E A L
A T E
W-K-M
A L V E S
CONTACT
Rising stem
CONTENTS MENU
Full-bore through-conduit
design eliminates turbulence.
TECHNICAL DATA
www:
CONTACT
PRINT
Segment
HELP
SD24012
Gate
(p40)
O W
-R-S
E A L
A T E
W-K-M
A L V E S
Features/Benefits
Expanding gates for powerful seal
During travel, the gate and segment
assembly is collapsed and travels freely.
In the closed position, the segment is
forced by a stop to wedge against the
gate, pushing both out against the seats.
In the open position, the gate and
segments again are forced to wedge
against each other, expanding to form a
seal against the seats and isolate flow and
any contaminants from the valve body.
Mechanical seating
Seating force is mechanical, normally
unaffected by line pressure fluctuations or
vibration, for an absolute mechanical
seal, both upstream and downstream.
CONTACT
Through-conduit design
The full round bore makes it possible to
run pigs, scrapers or hot tap cutters without damaging the valve, lodging the
scraper, or jamming it with metal cuttings
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
SPECIFICATIONS
Sizes
End Connections
6" - 36"
Pressure Classes
Body Styles
Unibody
Operating Temperatures
Optional Materials
for standard
available.
HELP
(p41)
- T- G
A F
A R D
CAMERON
C T U A T O R S
CONTACT
CONTENTS MENU
MA12
6A, 14D, 6D
Trim
Standard - AA
TECHNICAL DATA
www:
Class
Standard - 1,2
Maximum Operating Pressure
CONTACT
170 psi
Relief device setting
170 psi (12 Bars) at 130F (54C)
Test Pressure
255 psi (18 Bars)
Spring preload at full closed
position
850 lbs force
Weight
75 lbs (34kg)
Operating Temperatures
(T) = 0F to +180F (-18C to + 66C)
HELP
Volume Displacement
Model MA12
(p42)
A F
- T- G
A R D
CAMERON
C T U A T O R S
CLOSE
OPEN
MH60
MP14
CONTACT
Model MP14
Model MH60
C0762
C0922
CONTENTS MENU
TECHNICAL DATA
www:
Sizing for
API Classification
6A, 14D
Trim
Test Pressure
Standard - AA
Weight by model
FF
PSL*
1,2,3
Class
Standard - 1,2
CONTACT
HELP
Sizing for
API Classification
Test Pressure
6A, 14D, 6D
Trim
Standard - AA
position
FF
Weight
PSL*
1,2,3
Operating Temperatures
Class
Standard - 1,2
Volume displacement
170 psi
(p43)
E R I E S
DM
API/ANSI
A T E
DEMCO
A L V E S
CONTACT
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
HELP
4" and larger API 5000 Series DM Gate Valve
(12 bolt bonnet design shown - 10,000 psi test)
(p44)
DM
E R I E S
API/ANSI
A T E
Features/Benefits
In-line field repairability
The bonnet is easily removed for internal
parts inspection and/or replacement without removing the valve from the line.
This design simplicity permits fast and
easy service without the need for special
tools.
CONTACT
CONTENTS MENU
TECHNICAL DATA
www:
C
B
DEMCO
A L V E S
CONTACT
SPECIFICATIONS
F
E
Sizes
Pressure Class
Optional Materials
Seat: Hypalon
Standard Materials
industry standards.
HELP
E
(p45)
DM
E R I E S
7500
A T E
DEMCO
A L V E S
Standpipe manifolds
Pump manifold block valves
High pressure drilling system block
valves
High pressure frac service
Features/Benefits
Floating slab gate design
A slab gate with T slot stem connection
allows the gate to float to the seat providing a tighter pressure responsive seal.
CONTACT
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
HELP
(p46)
DM
E R I E S
7500
A T E
DEMCO
A L V E S
CONTACT
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
SPECIFICATIONS
Sizes
Pressure
Optional Materials
Standard Materials
HELP
(p47)
DT/DB
E R I E S
DEMCO
A L V E S
Features/Benefits
In-line field repairability
The bonnet is easily removed for internal
parts inspection and/or replacement without removing the valve from the line.This
design simplicity permits fast and easy
service without the need for special tools.
CONTACT
A T E
CONTENTS MENU
TECHNICAL DATA
Full through
conduit design.
www:
CONTACT
HELP
Flanged DT Gate Valve
(p48)
DT/DB
E R I E S
DEMCO
A L V E S
D
SD-016080
SD016080
A T E
CONTACT
Accessories
CONTENTS MENU
TECHNICAL DATA
Flow Tees
Strainers
G
Flow Tees
www:
CONTACT
SPECIFICATIONS
H
Strainers
Sizes
Standard Materials
Pressure Class
Steel
Optional Materials
End Connection
HELP
(p49)
D Y N A C E N T R I C H I G H P E R F O R M A N C E B U T T E R F LY V
CONTACT
CONTENTS MENU
TECHNICAL DATA
Features/Benefits
Two body styles
Flangeless wafer and threaded lug styles
are available.
Heavy duty eccentric disc
Its wide sealing area is designed to
reduce seat wear.
Thrust bearing/disc spacer
A corrosion resistant, single component
thrust bearing/disc spacer reduces body
wear and assures positive centering of
disc in the valve bore.
Internal stop
Prevents disc overtravel and seat damage.
Combination thrust
bearing/disc spacer
reduces body wear,
and positively centers
disc in valve bore.
www:
W-K-M
A L V E S
CONTACT
Heavy duty eccentric disc
with wide sealing area is
designed to reduce seat
wear.
HELP
SD-11681-96
(p51)
D Y N A C E N T R I C H I G H P E R F O R M A N C E B U T T E R F LY V
SO2
CONTACT
FO2
CONTENTS MENU
TECHNICAL DATA
www:
MO1/MO3
Offset from
center of valve
W-K-M
A L V E S
CONTACT
SPECIFICATIONS
Offset from center of seat
Sizes
Standard Materials
3" - 24"
Working pressures
Up to 1480 psi
FO2 - fire-safe
Operating Temperatures
Up to 1000F (538C)
Optional Materials
Body Styles
hundred ladings.
HELP
(p52)
NE-C
E R I E S
CONTACT
U T T E R F L Y
DEMCO
A L V E S
Features/Benefits
Bi-directional sealing
This valve provides bi-directional sealing
at full-rated pressure with identical flowway from either face.
Integral flange seal
Molded into the edge of the seat is an
integral flange seal which accommodates
ANSI weld neck, slip-on, threaded and
socket flanges as well as stub end
type C flanges.
ANSI class 150 rating
Body rating is ANSI class 150 (285 psi
non-shock). Wafer body diameters are
CONTENTS MENU
TECHNICAL DATA
www:
Positively oriented disc
CONTACT
Hard backed
cartridge seat
(2" - 36")
HELP
One piece body
Wafer style shown
(p53)
E R I E S
NE-C
U T T E R F L Y
CONTACT
DEMCO
A L V E S
CONTENTS MENU
Hard-backed seat
TECHNICAL DATA
www:
B
CONTACT
SPECIFICATIONS
PRINT
C
Sizes
Operating Temperatures
2" - 48"
and application
Pressure rating
HELP
D
(p54)
T Y L E S
N D
CONTACT
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
HELP
DEMCO
C C E S S O R I E S
Sanitary Features
B
(p55)
T Y L E S
N D
DEMCO
C C E S S O R I E S
Actuators
Demco Series DR pneumatic actuators
(A1) are available in double-acting or
fail-safe, spring return models. Series DR
actuators are compact, high-torque, piston
actuators. Series R diaphragm actuators
(A2) incorporate a heavy-duty, enclosed
rack-and-pinion linkage. Diaphragm actuators are suitable for low-pressure, pneumatic service. Electric actuators (A3) are
used when compressed air is not available
for pneumatic operations.
Handles and stem extensions
Three basic handle designs interchange
on any 2" to 12" valves: ten position
locking, two position locking and memory stop. Memory-stop handles provide
throttling which is infinitely adjustable
and can be set by a lock nut with memory-stop setting (adjustable open stop).
Handles are available in basic trim, corrosion-resistant trim and sanitary trim. Stem
extension are fabricated from carbon steel
parts and contained in a tubular housing.
Gaskets or O-rings seal the stem extension at top and bottom. These extensions
are fabricated to specified lengths.
A1
CONTACT
Stem extension
with handle
on Series NE-I
butterfly valve
CONTENTS MENU
Gear operators
Demco weatherproof gear operators are
offered with a choice of handwheel,
chain-wheel, or square nut. The worm
gearing has self-locking set screws to
control open and closed positioning or
an optional adjustable memory stop for
balance return to a preset open
position after closing.
TECHNICAL DATA
www:
A2
CONTACT
HELP
A3
Electric actuator
Gear operator
(p56)
A S
A N D
I Q U I D S
I P E L I N E S
TECHNICAL DATA
www:
CONTACT
HELP
One of the most relied on for pipeline applications, Cameron Welded Body Ball Valves combine the strength of forged steel components
with compact, spherical design.
(p58)
A S
A N D
I Q U I D S
I P E L I N E S
CONTACT
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
HELP
(p59)
I L
A N D
A S
R O D U C T I O N
TECHNICAL DATA
www:
CONTACT
HELP
The ball valve designed for a variety of demanding applications, WKM DynaSeal Trunnion Ball Valves are widely used in oilfield
applications around the world.
(p60)
I L
A N D
A S
R O D U C T I O N
CONTACT
CONTENTS MENU
W-K-M DynaCentric
High Performance
Butterfly Valve
Thornhill Craver
Adjustable Choke
W-K-M Pow-R-Seal
Gate Valve
W-K-M 210A/210L
Ductile Iron Ball Valve
TECHNICAL DATA
www:
CONTACT
HELP
(p61)
N D U S T R I A L
TECHNICAL DATA
www:
CONTACT
HELP
With their wide variety of body styles and trim packages, the Demco family of butterfly valves are among the most commonly chosen by
an impressive array of industries.
(p62)
N D U S T R I A L
W-K-M Pow-R-Seal
Gate Valve
CONTACT
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
HELP
(p63)
F T E R M A R K E T
CONTACT
E R V I C E S
Full remanufacturing
The high level technical expertise in
valve design and sealing technology
developed for the Cameron, W-K-M,
Foster, and Demco valves, is now available in re-manufactured products from a
growing number of Cooper Cameron
Valves aftermarket facilities strategically
located throughout the world.
Multiple services
Customer property management, valve
repair, valve exchange, responsive field
service and the sale of remanufactured
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
HELP
(p64)
F T E R M A R K E T
E R V I C E S
CONTACT
CCV offers a wide range of field services to fit customer needs, including:
Installation
Routine Maintenance
Emergency Repairs
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
HELP
(p65)
A L E S
F F I C E S
A N D
L A N T S
askus@ccvalve.com
PLANTS
SALES LOCATIONS
CONTACT
ALABAMA
Tel: (334) 887-5552
Fax: (334) 821-3702
OHIO
Tel: (614) 799-8897
Fax: (614) 799-8949
ARGENTINA
Tel: 54-1-811-4000
Fax: 54-1-811-0909
CALIFORNIA
Tel: (805) 631-1550
Fax: (805) 631-1510
OKLAHOMA
Tel: (918) 622-9641
Fax: (918) 438-8367
BRAZIL
Tel: 55-11-3066-3600
Fax: 55-11-3064-6228
COLORADO
Tel: (303) 841-1693
Fax: (303) 841-5486
TEXAS
CANADA
Tel: (403) 261-2800
Fax: (403) 262-5181
Canyon
Tel: (806) 655-5999
Fax: (806) 655-1780
LOUISIANA
Houma
Tel: (504) 868-6343
Fax: (504) 851-1868
CONTENTS MENU
TECHNICAL DATA
New Iberia
Tel: (318) 367-3478
Fax: (318) 367-5751
www:
MAINE
Tel: (207) 647-5906
Fax: (207) 647-8929
CONTACT
CHILE
Tel: 56-61-213-931
Fax: 56-61-214-379
Corpus Christi
Tel: (512) 289-0535
Fax: (512) 289-2842
MISSOURI
Tel: (314) 447-5645
Fax: (314) 447-7672
De Soto
Tel: (972) 218-9700
Fax: (972) 218-9701
FRANCE
Tel: 33-4-67-111-502
Fax: 33-4-67-111-504
Houston
Tel: (713) 983-0314
Fax: (713) 983-9612
MEXICO
Tel: 52-5-580-0296
Fax: 52-5-395-8669
OKLAHOMA
Tel: (405) 631-1321
Fax: (405) 629-0420
TEXAS
Livingston
Tel: (409) 327-4858
Fax: (409) 327-3218
Missouri City
Tel: (281) 499-8511
Fax: (281) 499-5211
Tel: 1-800-323-9160
CANADA
Tel: (403) 435-0777
Fax: (403) 435-0700
Odessa
Tel: (915) 362-1161
Fax: (915) 362-1173
FRANCE
Tel: 33-4-67-111-500
Fax: 33-4-67-116-00
UTAH
Tel: (435) 781-0434
Fax: (435) 789-5656
MEXICO
Tel: 52-29-811-008
Fax: 52-29-811-009
WYOMING
Tel: (307) 473-8502
Fax: (307) 577-3015
SINGAPORE
Tel: 65-861-3355
Fax: 65-861-6197
WISCONSIN
Tel: (414) 679-9880
Fax: (414) 679-9881
SCOTLAND
Tel: 44-1506-444-000
Fax: 44-1506-441-320
NEVADA
Tel: (702) 787-0297
Fax: (702)787-0797
LOUISIANA
Tel: (318) 363-7500
Fax: (318) 363-7516
Tel: 1-800-637-5002
VENEZUELA
Tel: 58-61-312-960
Fax: 58-61-310-638
NEW MEXICO
Tel: (505) 326-4369
Fax: (505) 564-8191
HELP
(p66)
R O D U C T
P E C I F I C A T I O N S
Ball Valves
Cameron Welded Ball Valves
Full and Reduced Opening
150 Lb. Class
300 Lb. Class
400 Lb. Class
600 Lb. Class
900 Lb. Class
1,500 Lb. Class
2,500 Lb. Class
API Flanged End
Dimensional Data
CONTACT
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
Ordering Information
Material Usage Guide
Choke Accessories
Dimensional Data
Thornhill Craver Adjustable Chokes
Thornhill Craver Force Balanced Chokes
Long Nose Heater Chokes
O N T E N T S
Gate Valves
Foster D-Seal
Actuation Data
W-K-M Pow-R-Seal
Dimensional Data
Actuation Data
Demco Series DM API/ANSI
Classes
400,600
900,1500
1500 4"
2,000 3,000 5,000 WP
4", 5", 6" 5000 WP
General Technical Information
Demco Series DM 7500
Dimensional Data
Demco Series DT
Demco Series DB
Butterfly Valves
W-K-M DynaCentric High Performance
Standard Materials
Seat-Seal Material Codes and Ratings
Valve Body Pressure Ratings
Valve Sizing Formulas
Flow Characteristics
Torque Values
Dimensional Data
Demco Series NE-C, NE-I, NE-D, NEI-T 2"-12"
Demco Series NF-C 14"-24"
Demco Series NF-C 30"-48"
Dimensional Data
Butterfly Valve Handles
Weatherproof Gear Operators
DR Series Piston Actuators
Electric Actuators
Diaphragm Actuators
Stem Extensions, Tees and Adapters
General Technical Information
Standard Material Data
HELP
P R O D U C T
S P E C I F I C A T I O N S
C O N T E N T S
(p67)
E L D E D
O D Y
A L L
CAMERON
A L V E S
How to Order
Specify the following when ordering another manufacturers power operator to fit a Cameron Ball Valve:
1. Valve size and pressure class and, if for field conversion,
the present operator.
2. Maximum differential pressure across valve during
operation and any abnormal operating conditions.
3. Speed of opening and closing, probable frequency of
operation.
4. Type operator desired (electric, hydraulic, pneumatic).
5. Information on operating medium. If electric: voltage, frequency, single or three phase, open or explosion-proof motor.
If hydraulic or pneumatic: operating medium, pressure.
6. Accessories and controls: limit switches, instrumentation,
valving, tanks, pumps, etc.
CONTACT
80
06
Classification
Pressure
Classification
Opening
End
Connection
CONTENTS MENU
TECHNICAL DATA
www:
Operator
Lever
Trim
80
ANSI
01
ANSI 150
Full
1A
Extension Lever
Standard (150-1500)
81
API
03
ANSI 300
Reduced
Worm Gear
82
AFNOR
04
ANSI 400
Venturi
2A
83
DIN
06
ANSI 600
All Others
Subsea Gear
84
UNI
09
ANSI 900
4A
123
15
ANSI 1500
RF/RF
Direct Stem
Pressure Regulating
(150-1500)
WE/WE
7A
NACE/(150-2500)
ANSI 2500
212
25
RF/WE
Worm Gear/Adapted
NACE/(2000-5000)
API 2000
213
20
RTJ/RTJ
8A
Extension Worm
Gear/Adapted
Tefzel/NACE (150-1500)
API 3000
214
30
50
API 5000
RTJ/WE
All others
CONTACT
22
Square
22A
Extension Square
Nut /Mtg /Flg
23
HELP
(p68)
E L D E D
O D Y
A L L
A L V E S
CAMERON
Standards
Materials
CONTACT
Torque Information
Please contact your Cooper Cameron Valves representative
to obtain a copy of the engineering bulletin which provides
detailed torque information for sizing of power actuators.
Pressure Rating
Temperature Rating
Regular
Corrosion Resistant
(NACE MR01-75)
Standard
Class 150-2500
API 2000-5000
1
2
212
213
Low Temperature
High Temperature
Class 150-2500
API 2000-5000
Class 150-600
216
217
222
Tefzel
(Acidizing)
Class 150-1500
API 2000-5000
140
108
214
215
Tefzel
Low Temperature
Class 150-1500
API 2000-5000
223
Duplex (Internal)
Stainless Steel
Full Duplex
Stainless Steel
Class 150-1500
276
Class 150-1500
504
CONTENTS MENU
TECHNICAL DATA
www:
Code Identification:
A End-to-end (length dimension)
B Bore diameter
C Centerline-to-bottom
D1 Flange outside diameter
D2 Flange inside dimension
E Sphere dimension
Code Identification:
H Center of bore to top of square nut for lever operated valves,
center of bore to handwheel for gear operated valves
L Center of bore to end of lever
G Handwheel diameter
D1
D2
HELP
SD-24028
SD-24027
CONTACT
SD-24029
(p69)
U L L
P E N I N G
150 L
. C
L A S S
VA
A L L
CAMERON
LV E S
E
G
H
D1
D2
Flanged End
Size
Stem
Size
in.
Nom
Diam.
in.
Ball
Bore
B in.
2
3
2.06
3.13
1
1
4.06
CONTACT
CONTENTS MENU
Raised Ring
Face
Joint
Length Length
A in.
A in.
HELP
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in.
2.06
3.13
#11
#12.5
3.94
5.12
5
6.75
24
24
Diam.
D2
in.
6
7.5
H
in.
6.34
7.44
Weld
39
64
32
58
7.5
8.5
1.5
9.5
4.06
14
5.94
8.5
36
8.43
88
79
1.5
15.5
16
11
18
7.91
11.25
36
10.43
263
237
341
18
18.5
13.5
#21.5
10
15.5
18
12.55
380
10
21
21.5
16
10
#23.5
12.12
18.5
18
14.54
633
567
12
12
24
24.5
19
12
#26.5
14.5
22.36
18
20.14
980
870
14
13.25
27
27.5
21
13.25
*28.5
14.64
24
24
21.16
1215
1075
16
15.25
30
30.5
23.5
15.25
*30.5
16.01
26.32
24
22.52
1510
1330
18
17.25
34
34.5
25
17.25
*33.5
19.25
29.2
24
26.19
1904
1684
20
19.25
36
36.5
27.5
19.25
*35.5
20.81
32.27
18
27.75
2468
2008
22
21.25
40
40.5
29.5
21.25
*38.5
22.28
36
18
29.22
3734
3327
24
23.25
42
42.5
32
23.25
* 42
23.69
38.76
18
30.63
4184
3610
26
25
45
34.25
25
*44.5
26.49
41.75
24
34.34
5066
4385
28
27
49
36.5
27
* 47
27.88
44.86
24
35.72
6261
5468
30
29
51
38.75
29
* 49
29.51
47.9
24
37.37
7427
6607
34
32.75
58
43.75
32.75
*54.5
32.16
53.64
30
40.01
10123
9140
36
34.5
60
46
34.5
*56.5
33.76
56.83
36
41.6
12012
11003
40
38.5
7.5
69
50.75
38.5
* 65
40.14
65
30
50.25
42
41.25
7.5
72
53
41.25
*66.5
41.78
68.6
42
51.89
48
46.5
7.5
80
59.5
46.5
* 84
45.9
77
Flanged End
Weld End
Diam.
D1
mm
Diam.
D2
mm
Length
A
mm
C.L.
To
Bottom
C
mm
Body
Sphere
E
mm
Lever
Length
L
mm
Diameter
Handwheel
for Gear
G
mm
Flange
Weld
190.5
152.4
52.3
#279.4
100.1
127.0
609
161.0
18
15
203.2
215.9
190.5
79.5
#317.5
130.0
171.5
609
189.0
29
26
38.1
228.6
241.3
228.6
103.1
355.6
150.9
215.9
914
214.1
40
36
152.4
38.1
393.7
406.4
279.4
152.4
457.2
200.9
285.8
914
264.9
119
108
203.2
203.2
50.8
457.2
469.9
342.9
203.2
#546.1
254.0
393.7
457
318.8
171
153
254.0
254.0
50.8
533.4
546.1
406.4
254.0
#596.9
307.8
469.9
457
369.3
285
255
304.8
304.8
76.2
609.6
622.3
482.6
304.8
#673.1
368.3
567.9
457
511.5
445
395
355.6
336.6
76.2
685.8
698.5
533.4
336.6
*723.9
371.9
609.6
609
537.4
551
488
406.4
387.4
76.2
762.0
774.7
596.9
387.4
*774.7
406.7
668.5
609
572.0
685
603
457.2
438.2
101.6
863.6
876.3
635.0
438.2
850.9
489.0
741.7
609
665.2
864
764
508.0
489.0
101.6
914.4
927.1
698.5
489.0
901.7
528.6
819.7
457
704.9
1120
911
558.8
539.8
101.6
1016.0
1028.7
749.3
539.8
*977.9
565.9
914.4
457
742.2
1694
1509
609.6
590.6
101.6
1066.8
1079.5
812.8
590.6
*1066.8
601.7
984.5
457
778.0
1898
1638
660.4
635.0
127.0
1143.0
870.0
635.0
*1130.3
672.8
1060.5
609
872.2
2298
1989
711.2
685.8
127.0
1244.6
927.1
685.8
*1193.8
708.2
1139.4
609
907.3
2840
2480
762.0
736.6
127.0
1295.4
984.3
736.6
*1244.6
749.6
1216.7
609
949.2
3369
2997
863.6
831.9
127.0
1473.2
1111.3
831.9
*1384.3
816.9
1371.6
762
1016.3
4592
4146
914.4
876.3
127.0
1524.0
1168.4
876.3
*1435.1
857.5
1443.5
914
1056.6
5449
4991
1016.0
977.9
190.5
1752.6
1289.1
977.9
*1651.0
1019.6
1651.0
762
1276.4
1066.8
1047.8
190.5
1828.8
1346.2
1047.8
*1689.1
1061.2
1742.4
1067
1318.0
1219.2
1181.1
190.5
2032.0
1511.3
1181.1
*2133
1166
1956
Stem
Size
mm
Raised Ring
Face
Joint
Length Length
A mm A mm
Nom
Diam.
mm
Ball
Bore
B mm
50.8
52.3
25.4
177.8
76.2
79.5
25.4
101.6
103.1
152.4
Length (A) of a weld x flanged end valve is one half the sum of lengths (A)
of a weld end and of a flange end of the same size and rating.
7
8
Size
CONTACT
Length
A
in.
C.L.
To
Bottom
C
in.
Diam.
D1
in.
10
TECHNICAL DATA
www:
Weld End
H
mm
(p70)
E D U C E D
P E N I N G
150 L
. C
L A S S
VA
A L L
CAMERON
LV E S
E
G
H
D1
D2
Flanged End
Size
CONTACT
CONTENTS MENU
Length
A
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in.
3.13
4.06
#11
#12.5
3.94
5.12
5
6.75
24
24
11
#14
5.94
8.5
36
13.5
18
7.91
11.25
36
16
10
#21.5
10
15.5
24.5
19
12
#23.5
12.12
27
27.5
21
13.25
#26.5
14.5
30
30.5
23.5
15.25
*28.5
34
34.5
25
17.25
*30.5
17.25
36
36.5
27.5
19.25
22
19.25
40
40.5
29.5
24
21.25
42
42.5
26
23.25
45
28
25
30
27
32
Raised Ring
Face
Joint
Length Length
A in.
A in.
Nom
Diam.
in.
Ball
Bore
B in.
3
4
2.06
3.13
1
1
8
9
4.06
1.5
10.5
1.5
18
10
21
12
10
14
12
16
18
Diam.
D1
in.
Diam.
D2
in.
7.5
9
11
18.5
21.5
24
13.25
15.25
20
www:
CONTACT
6.34
7.44
Flange
40
70
Weld
36
63
8.43
115
103
10.43
290
261
18
12.55
424
381
18.5
18
14.54
780
700
22.36
18
20.14
1115
1015
14.64
24
24
21.16
1375
1195
16.01
26.32
24
22.52
1770
1550
*33.5
19.25
29.2
24
26.19
2094
1804
21.25
*35.5
20.81
32.27
18
27.75
2758
2214
32
23.25
*38.5
22.28
36
18
29.22
3957
3451
34.25
25
*42
23.69
38.76
18
30.63
4634
3943
49
36.5
27
*44.5
26.49
41.75
24
34.34
5692
4818
51
38.75
29
*47
27.88
44.86
24
35.72
6875
5928
29
54
41.75
32.75
*49
29.51
47.9
24
37.37
8273
7381
36
32.75
60
46
34.5
*54.5
32.16
53.64
30
40.01
10759
9865
42
34.5
72
53
41.25
*56.5
33.76
56.83
36
41.6
Body
Sphere
E
mm
Lever
Length
L
mm
Diameter
Handwheel
for Gear
G
mm
8.5
9.5
Flanged End
Size
TECHNICAL DATA
Weld End
C.L.
To
Bottom
C
in.
Stem
Size
in.
Stem
Size
mm
Weld End
Diam.
D1
mm
Diam.
D2
mm
Length
A
mm
C.L.
To
Bottom
C
mm
215.9
241.3
190.5
228.6
79.5
103.1
#279.4
#317.5
100.1
130.0
127.0
171.5
609
609
161.0
189.0
393.7
406.4
279.4
152.4
#355.6
150.9
215.9
914
214.1
52
47
457.2
469.9
342.9
203.2
457.2
200.9
285.8
914
264.9
131
118
Raised Ring
Face
Joint
Length Length
A mm A mm
Nom
Diam.
mm
Ball
Bore
B mm
76.2
101.6
52.3
79.5
25.4
25.4
203.2
228.6
152.4
103.1
38.1
203.
152.4
38.1
H
mm
Weld
18
32
16
29
254.0
203.2
50.8
533.4
546.1
406.4
254.0
#546.1
254.0
393.7
457
318.8
191
171
304.8
254.0
50.8
609.6
622.3
482.6
304.8
#596.9
307.8
469.9
457
369.3
351
315
355.6
304.8
76.2
685.8
698.5
533.4
336.6
#673.1
368.3
567.9
457
511.5
524
461
406.4
336.6
76.2
762.0
774.7
596.9
387.4
*723.9
371.9
609.6
609
537.4
624
542
457.2
387.4
76.2
863.6
876.3
635.0
438.2
*774.4
406.7
668.5
609
572.0
803
703
508.0
438.2
101.6
914.4
927.1
698.5
489.0
*850.9
489.0
741.4
609
665.2
950
818
558.8
489.0
101.6
1016.0
1028.7
749.3
539.8
*901.7
528.6
819.7
457
704.9
1247
1004
609.6
539.8
101.6
1066.8
1079.5
812.8
590.6
*977.7
565.9
914.4
457
742.2
1795
1564
660.4
590.6
101.6
1143.0
870.0
635.0
*1066.8
601.7
984.5
457
778.0
2102
1789
711.2
635.0
127.0
1244.6
927.1
685.8
*1130.3
672.8
1060.5
609
872.2
2582
2185
762.0
685.8
127.0
1295.4
984.3
736.6
*1193.8
708.2
1139.4
609
907.3
3119
2689
812.8
736.6
127.0
1371.6
1047.8
831.9
*1244.6
749.6
1216.7
609
949.2
3753
3348
914.4
831.9
127.0
1524.
1168.4
876.3
*1384.3
816.9
1362.5
762
1016.3
4880
4475
1066.8
876.3
127.0
1828.8
1346.2
1047.8
*1435.1
857.5
1443.5
914
1056.6
Note: Venturi opening or other reduced bore valves are available upon request.
Length (A) of a weld x flanged end valve is one half the sum of lengths (A)
of a weld end and of a flange end of the same size and rating.
HELP
(p71)
U L L
300 L
P E N I N G
. C
L A S S
VA
A L L
CAMERON
LV E S
E
G
H
D1
D2
Flanged End
Size
Nom
Diam.
in.
Ball
Bore
B in.
2
3
2.06
3.13
1
1
4.06
CONTACT
CONTENTS MENU
CONTACT
HELP
Raised Ring
Face
Joint
Length Length
A in.
A in.
Weld End
Length
A
in.
C.L.
To
Bottom
C
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in.
2.06
3.13
#11
#12.5
3.94
5.12
5
6.75
24
24
Diam.
D1
in.
Diam.
D2
in.
6.5
8.25
H
in.
Weld
41
80
34
72
8.43
120
108
10.43
275
247
18
12.55
455
406
18.5
24
14.54
726
648
14.5
22.36
18
20.14
1100
990
*28.5
14.64
24
24
21.16
1460
1314
15.25
*30.5
16.01
26.32
24
22.52
1812
1631
17.25
*33.5
19.25
29.2
24
26.19
2299
2067
30.5
19.25
*35.5
20.81
32.27
18
27.75
2808
2508
43.875
33
21.25
*38.5
22.28
36
24
29.22
4257
3327
45
45.875
36
23.25
*42
23.69
38.76
24
30.63
4770
3610
49
50
38.25
25
*44.5
26.49
41.75
24
34.34
5775
4335
27
53
54
40.75
27
*47
27.88
44.86
24
35.72
7138
5518
30
29
55
56
43
29
*49
29.51
47.9
30
37.37
8467
6607
34
32.75
64
65.125
47.5
32.75
*54.5
32.16
53.64
36
40.01
11540
9140
36
34.5
7.5
68
69.125
50
34.5
*56.5
36.8
56.83
24
46.92
13693
11093
40
38.5
7.5
74
48.75
38.5
*65
40.14
65
36
50.25
42
41.25
7.5
76
50.75
41.25
*66.5
41.78
68.6
42
51.89
48
46.5
7.5
86
57.75
46.5
*84
45.9
77
Body
Sphere
E
mm
Lever
Length
L
mm
Diameter
Handwheel
for Gear
G
mm
9.125
11.75
1.5
12
12.625
10
4.06
#14
5.94
8.5
36
1.5
15.875
16.5
12.5
18
7.91
11.25
36
+19.75
20.375
15
#21.5
10
15.5
10
10
22.375
23
17.5
10
#23.5
12.12
12
12
25.5
26.125
20.5
12
#26.5
14
13.25
30
30.625
23
13.25
16
15.25
33
33.625
25.5
18
17.25
36
36.625
28
20
19.25
39
39.75
22
21.25
43
24
23.25
26
25
28
Flanged End
Size
Weld End
Diam.
D1
mm
Diam.
D2
mm
Length
A
mm
C.L.
To
Bottom
C
mm
231.8
298.5
165.1
209.6
52.3
79.5
#279.4
#317.5
100.1
130.0
127.0
171.5
609
609
161.0
189.0
304.8
320.7
254.90
103.1
#355.6
150.9
215.9
914
214.1
54
49
403.2
419.1
317.5
152.4
457.2
200.9
285.8
914
264.9
125
112
50.8
501.7
517.5
381.0
203.2
#546.1
254.0
393.7
457
318.8
205
183
50.8
568.3
584.2
444.5
254.0
#596.9
307.8
469.9
609
369.3
327
292
304.8
76.2
647.7
663.6
520.7
304.8
#673.1
368.3
567.9
457
511.5
499
449
355.6
336.6
76.2
762.0
777.9
584.2
336.6
*723.9
371.9
609.6
609
537.4
662
596
406.4
387.4
76.2
838.2
854.1
647.7
387.4
*774.7
406.7
668.5
609
572.0
822
740
457.2
438.2
101.6
914.4
930.3
711.2
438.2
*850.9
489.0
741.7
609
665.2
1043
938
508.0
489.0
101.6
990.6
1009.7
774.7
489.0
*901.7
528.6
819.7
457
704.9
1274
1138
558.8
539.8
101.6
1092.2
1114.4
838.2
539.8
*977.9
565.9
914.4
609
742.2
1931
1509
609.6
590.6
101.6
1143.0
1165.2
914.4
590.6
*1066.8
601.7
984.5
609
778.0
2164
1637
660.4
635.0
127.0
1244.6
1270.0
971.6
635.0
*1130.3
672.8
1060.5
609
872.2
2620
1966
711.2
685.8
127.0
1346.2
1371.6
1035.1
685.8
*1193.8
708.2
1139.4
609
907.3
3238
2503
762.0
736.6
127.0
1397.0
1422.4
1092.2
736.6
*1244.6
749.6
1216.7
762
949.2
3840
2997
863.6
831.9
127.0
1625.6
1654.2
1206.5
831.9
*1384.3
816.9
1362.5
914
1016.3
5234
4146
914.4
876.3
190.5
1727.2
1755.8
1270.0
876.3
*1435.1
934.7
1443.5
609
1191.8
6211
5032
1016.0
977.9
190.5
1879.6
1238.3
977.9
*1651.0
1019.6
1651.0
914
1276.4
1066.8
1047.8
190.5
1930.4
1289.1
1047.8
*1689.1
1061.2
1742.4
1067
1318.0
1219.2
1181.1
190.5
2184.4
1466.9
1181.1
*1930.4
1143.0
1955.8
Stem
Size
mm
Raised Ring
Face
Joint
Length Length
A mm A mm
Nom
Diam.
mm
Ball
Bore
B mm
50.8
76.2
52.3
79.5
25.4
25.4
215.9
282.6
101.6
103.1
38.1
152.4
152.4
38.1
203.2
203.2
254.0
254.0
304.8
Length (A) of a weld x flanged end valve is one half the sum of lengths (A)
of a weld end and of a flange end of the same size and rating.
6.34
7.44
8.5
11.125
TECHNICAL DATA
www:
Stem
Size
in.
H
mm
Weld
19
36
15
33
(p72)
E D U C E D
P E N I N G
300 L
. C
L A S S
VA
A L L
CAMERON
LV E S
E
G
H
D1
D2
Flanged End
Size
CONTACT
CONTENTS MENU
Stem
Size
in.
Raised Ring
Face
Joint
Length Length
A in.
A in.
Nom
Diam.
in.
Ball
Bore
B in.
2.06
11.125
3.13
4.06
www:
CONTACT
Length
A
in.
C.L.
To
Bottom
C
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in.
3.13
*11
3.94
24
6.34
Flange
65
10
4.06
#12.5
5.12
6.75
24
7.44
95
85
12.5
*14
5.94
8.5
36
8.43
175
157
Diam.
D1
in.
Diam.
D2
in.
11.75
8.25
12
12.625
1.5
15.875
16.5
H
in.
1.5
+19.75
20.375
15
*18
7.91
11.25
36
10.43
335
301
18
18.625
17.5
10
*21.5
10
15.5
18
12.55
522
467
12
10
19.75
20.375
20.5
12
*23.5
12.12
18.5
24
14.54
848
758
14
12
30
30.625
23
13.25
*26.5
14.5
22.36
18
20.14
1285
1165
16
13.25
33
33.625
25.5
15.25
*28.5
14.64
24
24
21.16
1642
1486
18
15.25
36
36.625
28
17.25
*30.5
16.01
26.32
24
22.52
2114
1903
20
17.25
39
39.75
30.5
19.25
*33.5
19.25
29.2
24
26.19
2511
2258
22
19.25
43
43.875
33
21.25
*35.5
20.81
32.27
18
27.75
3144
2714
24
21.25
45
45.875
36
23.25
*38.5
22.28
36
24
29.22
4611
3451
26
23.25
49
50
38.25
25
*42
23.69
38.76
24
30.63
5283
3943
28
25
53
54
40.75
27
*44.5
26.49
41.75
24
34.34
6488
4868
30
27
55
56
43
29
*47
27.88
44.86
24
35.72
7838
5978
32
29
60
61.125
45.25
32.75
*49
29.51
47.9
30
37.37
9431
7381
36
32.75
68
69.125
50
34.5
*54.5
32.16
53.64
36
40.01
12265
9865
42
34.5
7.5
76
50.75
41.25
*56.5
36.8
56.83
24
46.92
Body
Sphere
E
mm
Lever
Length
L
mm
Diameter
Handwheel
for Gear
G
mm
Flanged End
Weld End
Diam.
D1
mm
Diam.
D2
mm
Length
A
mm
C.L.
To
Bottom
C
mm
298.5
320.7
209.6
254.0
79.5
103.1
*279.4
#317.5
100.1
130.0
127.0
171.5
609
609
161.0
189.0
403.2
419.1
317.5
152.4
*355.6
150.9
215.9
914
214.1
79
71
501.7
517.5
381.0
203.2
*457.2
200.9
285.8
914
264.9
152
136
50.8
568.3
584.2
444.5
254.0
*546,1
254.0
393.7
457
318.8
235
210
50.8
647.7
663.6
520.7
304.9
*596.9
307.8
469.9
609
369.3
382
341
304.8
76.2
762.0
777.9
584.2
336.6
*673.1
368.3
567.9
457
511.5
587
528
406.4
336.6
76.2
838.2
854.1
647.7
387.4
*723.9
371.9
609.6
609
537.4
745
678
457.2
387.4
76.2
914.4
930.3
711.2
438.2
*774.7
406.7
668.5
609
572.0
959
862
508.0
438.2
101.6
990.6
1009.7
774.7
489.0
*850.9
489.0
741.7
609
665.2
1138
1024
558.8
489.0
101.6
1092.2
1114.4
838.2
539.8
*901.7
528.6
819.7
457
704.9
1426
1231
609.6
539.8
101.6
1143.0
1165.2
914.4
590.6
*977.9
565.9
914.4
609
742.2
2091
1565
660.4
590.6
101.6
1244.6
1270.0
971.6
635.0
*1066.8
601.7
984.5
609
778.0
2396
1789
711.2
635.0
127.0
1346.2
1371.6
1035.1
685.8
*1130.3
672.8
1060.5
609
872.2
2943
2208
762.0
685.8
127.0
1397.0
1422.4
1092.2
736.6
*1193.8
708.2
1139.4
609
907.3
3555
2612
812.8
736.6
127.0
1524.0
1552.6
1149.4
831.9
*1244.6
749.6
1216.7
762
949.2
4278
3348
914.4
831.9
127.0
1727.2
1755.8
1270.0
867.3
*1384.3
816.9
1362.5
914
1016.3
5563
4475
1066.8
876.3
190.5
1930.4
1289.1
1047.8
*1435.1
934.7
1443.5
609
1191.8
Stem
Size
mm
Raised Ring
Face
Joint
Length Length
A mm A mm
Nom
Diam.
mm
Ball
Bore
B mm
76.2
101.6
52.3
79.5
25.4
25.4
282.6
304.8
152.4
103.1
38.1
203.2
152.4
38.1
254.0
203.2
304.8
254.0
355.6
Note: Venturi opening or other reduced bore valves are available upon request.
Length (A) of a weld x flanged end valve is one half the sum of lengths (A)
of a weld end and of a flange end of the same size and rating.
59
H
mm
Weld
29
43
27
39
HELP
Weld
10
Size
TECHNICAL DATA
Weld End
(p73)
U L L
400 L
P E N I N G
. C
L A S S
VA
A L L
CAMERON
LV E S
E
G
H
D1
D2
Flanged End
Size
CONTACT
CONTENTS MENU
Stem
Size
in.
Raised Ring
Face
Joint
Length Length
A in.
A in.
HELP
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in.
2
3
2.06
3.13
4.06
10
4.06
*14
5.94
8.5
36
1.5
19.5
19.625
12.5
*18
7.91
11.25
36
23.5
23.625
15
*21.5
10
15.5
18
10
10
26.5
26.625
17.5
10
*23.5
12.12
18.5
12
12
30
30.125
20.5
12
*26.5
14.5
22.36
14
13.25
32.5
32.625
23
13.25
*28.5
14.64
16
15.25
35.5
35.625
25.5
15.25
*30.5
17.84
18
17.25
38.5
38.625
28
17.25
*33.5
19.25
20
19.25
41.5
41.75
30.5
19.25
*35.5
22
21.25
45
45.375
33
21.25
24
23.25
48.5
48.875
36
26
25
51.5
52
28
27
55
30
29
34
32.75
36
40
Diam.
D1
in.
Diam.
D2
in.
Length
A
in.
Weld
8.43
140
126
10.43
305
274
12.55
530
473
24
14.54
910
819
18
20.14
1390
1240
24
18
21.16
1774
1576
26.32
18
24.78
2282
2040
29.2
24
26.19
2918
2626
22.11
32.27
24
30
3370
3028
38.5
23.63
36
24
31.53
5108
4332
23.25
*42
25.05
38.76
24
32.95
5963
5278
38.25
25
*44.5
26.49
41.75
24
34.34
7219
5872
55.5
40.75
27
*47
27.88
44.86
30
35.72
8923
7464
60
60.5
43
29
*49
29.51
47.9
36
37.37
10584
8657
7.5
70
70.625
47.5
32.75
*54.5
35.19
53.64
30
45.31
14425
12712
34.5
7.5
74
74.625
50
34.5
*56.5
36.8
56.83
30
46.92
18116
16700
38.5
7.5
78
50
38.5
*65
40.14
65
42
50.25
25100
23800
42
41.25
7.5
81
52
41.25
*66.5
41.78
68.6
42
51.89
27900
26200
48
46.5
91
59.5
46.5
*84
47.98
77
C.L.
To
Bottom
C
mm
Body
Sphere
E
mm
Lever
Length
L
mm
Diameter
Handwheel
for Gear
G
mm
Flanged End
Stem
Size
mm
Raised Ring
Face
Joint
Length Length
A mm A mm
Weld End
Nom
Diam.
mm
Ball
Bore
B mm
50.8
76.2
52.3
79.5
101.6
103.1
38.1
406.4
409.6
254.0
103.1
*355.6
150.9
215.9
914
214.1
64
57
152.4
152.4
38.1
495.3
498.5
317.5
152.4
*457.2
200.9
285.8
914
264.9
138
124
203.2
203.2
50.8
596.9
600.1
381.0
203.2
*546.1
254.0
393.7
457
318.8
240
215
254.0
254.0
50.8
673.1
676.3
444.5
254.0
*596.9
307.8
469.9
609
369.3
413
371
304.8
304.8
76.2
762.0
765.2
520.7
304.8
*673.1
368.3
567.9
457
511.5
631
562
355.6
336.6
76.2
825.5
828.7
584.2
336.6
*723.9
371.9
609.6
457
537.4
804
714
406.4
387.4
101.6
901.7
904.9
647.7
387.4
*774.7
453.1
668.5
457
629.4
1035
925
457.2
438.2
101.6
977.9
981.1
711.2
438.2
*850.9
489.0
741.7
609
665.2
1324
1191
508.0
489.0
127.0
1054.1
1060.5
774.7
489.0
*901.7
561.6
819.7
609
762.0
1529
1374
558.8
539.8
127.0
1143.0
1152.5
838.2
539.8
*977.9
600.2
914.4
609
800.9
2317
1955
609.6
590.6
127.0
1231.9
1241.4
914.4
590.6
*1066.8
636.3
984.5
609
836.9
2605
2394
660.4
635.0
127.0
1308.1
1320.8
971.6
635.0
*1130.3
672.8
1060.5
609
872.2
3275
2664
711.2
685.8
127.0
1397.0
1409.7
1035.1
685.8
*1193.8
708.2
1139.4
762
907.3
4047
3386
762.0
736.6
127.0
1524.0
1536.7
1092.2
736.6
*1244.6
749.6
1216.7
914
949.2
4801
3927
863.6
831.9
190.5
1778.0
1793.9
1206.5
831.9
*1384.3
893.8
1362.5
762
1150.9
6543
5766
914.4
876.3
190.5
1879.6
1895.5
1270.0
876.3
*1435.1
934.7
1443.5
762
1191.8
8218
7575
1016.0
977.9
190.5
1981.2
1270.0
977.9
*1651.0
1019.6
1651.0
1067
1276.4
11385
10796
1066.9
1047.8
190.5
2057.
1320.8
1047.8
*1689.1
1061.2
1742.4
1067
1318.0
12655
11884
1219.2
1181.1
228.6
2311.4
1511.3
1181.3
*2133
1219
1956
Diam.
D1
mm
Diam.
D2
mm
Length
A
mm
H
mm
Weld
Length (A) of a weld x flanged end valve is one half the sum of lengths (A)
of a weld end and of a flange end of the same size and rating.
Body
Sphere
E
in.
Ball
Bore
B in.
Size
CONTACT
C.L.
To
Bottom
C
in.
Nom
Diam.
in.
TECHNICAL DATA
www:
Weld End
(p74)
E D U C E D
P E N I N G
400 L
. C
L A S S
VA
A L L
CAMERON
LV E S
E
G
H
D1
D2
Flanged End
Size
CONTACT
CONTENTS MENU
Stem
Size
in.
Raised Ring
Face
Joint
Length Length
A in.
A in.
www:
CONTACT
C.L.
To
Bottom
C
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in.
Nom
Diam.
in.
Ball
Bore
B in.
3
4
2.06
3.13
16
16.125
10
4.06
*12.5
5.12
6.75
24
7.44
110
99
4.06
1.5
19.5
19.625
12.5
*14
5.94
8.5
36
8.43
195
175
Diam.
D1
in.
Diam.
D2
in.
Length
A
in.
H
in.
Flange
1.5
23.5
23.625
15
*18
7.91
11.25
18
10.43
430
387
10
26.5
26.625
17.5
10
*21.5
10
15.5
18
12.55
635
567
12
10
30
30.125
20.5
12
*23.5
12.12
18.5
24
14.54
1110
999
14
12
32.5
32.625
23
13.25
*26.5
14.5
22.36
18
20.14
1620
1458
16
13.25
35.5
35.625
25.25
15.25
*28.5
14.64
24
18
21.16
2034
1828
18
15.25
38.5
38.625
28
17.25
*30.5
17.84
26.32
18
24.78
2592
2351
20
17.25
41.5
41.75
30.5
19.25
*33.5
19.25
29.2
24
26.19
3348
3013
22
19.25
45
45.375
33
21.25
*35.5
22.11
32.27
24
30
3772
3322
24
21.25
48.5
48.875
36
23.25
*38.5
23.63
36
24
31.53
5413
4457
26
23.25
51.5
52
38.25
25
*42
25.05
38.76
24
32.95
6604
5413
28
25
55
55.5
40.75
27
*44.5
26.49
41.75
24
34.34
8110
6561
30
27
60
60.5
43
29
*47
27.88
44.86
30
35.72
9798
8184
32
29
65
65.625
45.25
32.75
*49
29.51
47.9
36
37.37
11789
9694
36
32.75
7.5
74
74.625
50
34.5
*54.5
35.19
53.64
30
45.31
15331
13517
42
34.5
7.5
81
52
41.25
*56.5
36.8
56.83
30
46.92
C.L.
To
Bottom
C
mm
Body
Sphere
E
mm
Lever
Length
L
mm
Diameter
Handwheel
for Gear
G
mm
Flanged End
Stem
Size
mm
Raised Ring
Face
Joint
Length Length
A mm A mm
Weld End
Nom
Diam.
mm
Ball
Bore
B mm
76.2
101.6
52.3
79.5
152.4
103.1
25.4
38.1
406.7
495.3
409.6
498.5
254.0
317.5
103.1
152.4
*317.5
*355.6
Diam.
D1
mm
Diam.
D2
mm
Length
A
mm
H
mm
Flange
Weld
171.5
215.9
609
914
189.0
214.4
50
88
45
79
203.2
152.4
38.1
596.9
600.1
381.0
203.2
*457.2
200.9
285.8
457
264.9
195
176
254.0
203.2
50.8
673.1
676.3
444.5
254.0
*546.1
254.0
393.7
457
318.8
288
257
304.8
254.0
50.8
762.0
765.2
520.7
304.8
*596.9
307.8
469.9
609
369.3
503
355.6
304.8
Use
600 lb.
Class Valves
76.2
825.5
828.7
584.2
336.6
*673.1
368.3
567.9
406.4
336.6
76.2
901.7
904.9
647.7
387.4
*723.9
371.9
609.6
457
537.4
923
829
457.2
387.4
101.6
977.9
981.1
711.2
438.2
*774.7
453.1
668.5
457
629.4
1175
1066
457
511.5
508.0
438.2
101.6
1054.1
1060.5
774.7
489.0
*850.9
489.0
741.7
609
665.2
1519
1367
489.0
127.0
1143.0
1152.5
838.2
539.8
*901.7
561.6
819.7
609
762.0
1711
1507
609.6
539.8
127.0
1231.9
1241.4
914.4
590.6
*977.9
600.2
914.4
609
800.9
2455
2022
660.4
590.6
127.0
1308.1
1320.8
971.6
635.0
*1066.8
636.3
984.5
609
836.9
2942
2455
711.2
635.0
127.0
1397.0
1409.7
1035.1
685.8
*1130.3
672.8
1060.5
609
872.2
3679
2976
762.0
685.8
127.0
1524.0
1536.7
1092.2
736.6
*1193.8
708.2
1139.4
762
907.3
4444
3712
812.8
736.6
127.0
1651.0
1666.9
1149.4
831.9
*1244.6
749.6
1216.7
914
949.2
5348
4397
914.4
831.9
190.5
1879.6
1895.5
1270.0
876.3
*1384.3
893.8
1362.5
762
1150.9
6954
6131
1066.8
876.3
190.5
2057.4
1320.8
1047.8
*1435.1
934.7
1443.5
762
1191.8
* Short pattern.
Dimensions of 26" through 42" flanges are per MSS-SP-44.
HELP
453
735
558.8
Note: Venturi opening or other reduced bore valves are available upon request.
Length (A) of a weld x flanged end valve is one half the sum of lengths (A)
of a weld end and of a flange end of the same size and rating.
Weld
Size
TECHNICAL DATA
Weld End
(p75)
U L L
P E N I N G
600 L
. C
L A S S
VA
A L L
CAMERON
LV E S
E
G
H
D1
D2
Flanged End
Size
CONTACT
CONTENTS MENU
Length
A
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in.
2.06
3.13
*11
*12.5
3.94
5.12
5
6.75
24
24
10.75
4.06
*14
5.94
8.5
36
14
*18
7.91
11.25
36
26.125
16.5
*21.5
10
15.5
31
31.125
20
10
*23.5
12.12
33
33.125
22
12
*26.5
14.5
13.25
35
35.125
23.75
13.25
*28.5
15.25
39
39.125
27
15.25
*30.5
18
17.25
43
43.125
29.25
17.25
20
19.25
47
47.25
32
22
21.25
51
51.375
24
23.25
55
26
25
28
27
30
Raised Ring
Face
Joint
Length Length
A in.
A in.
Nom
Diam.
in.
Ball
Bore
B in.
2
3
2.06
3.13
1
1
11.5
14
4.06
1.5
1.5
10
Diam.
D1
in.
Diam.
D2
in.
11.625
14.125
6.5
8.25
17
17.125
22
22.125
26
10
12
12
14
16
HELP
44
85
40
78
8.43
165
148
10.43
445
397
24
12.55
670
603
18.5
30
14.54
1050
945
22.36
18
20.14
1510
1359
14.64
24
24
21.16
2030
1825
17.84
26.32
18
24.78
2483
2232
*33.5
19.25
29.2
24
26.19
2985
2685
19.25
*35.5
22.11
32.27
24
30
4208
3628
34.25
21.25
*38.5
23.63
36
24
31.53
5772
4332
55.375
37
23.25
*42
25.05
38.76
30
32.95
6938
5278
57
57.5
40
25
*44.5
26.49
41.75
36
34.34
8013
5963
7.5
61
61.5
42.25
27
*47
30.87
44.86
30
40.99
9905
7555
29
7.5
65
65.5
44.5
29
*49
32.53
47.9
30
42.65
11748
8748
34
32.75
7.5
76
76.625
49
32.75
*54.5
35.19
53.64
42
45.31
16012
12712
36
34.5
7.5
82
82.625
51.75
34.5
*56.5
36.8
56.83
42
46.92
19998
16700
40
38.5
80
52
38.5
*65
42.02
65
42
55.425
26900
23800
42
41.25
83
55.25
41.25
*66.5
43.66
68.6
42
57.06
29920
26200
48
46.5
11
94
62.75
46.5
*84
51.18
77.33
--
Flanged End
Weld End
Diam.
D1
mm
Diam.
D2
mm
Length
A
mm
C.L.
To
Bottom
C
mm
Body
Sphere
E
mm
Lever
Length
L
mm
Diameter
Handwheel
for Gear
G
mm
295.3
358.8
165.1
209.6
52.3
79.5
*279.4
*317.5
100.1
130.0
127.0
171.5
609
609
161.0
189.0
431.8
435.0
273.1
103.1
*355.6
150.9
215.9
914
214.1
75
67
558.8
562.0
355.6
152.4
*457.2
200.9
285.8
914
264.9
202
180
50.8
660.4
663.6
419.1
203.2
*546.1
254.0
393.7
609
318.8
304
274
50.8
787.4
790.6
508.0
254.0
*596.9
307.8
469.9
762
369.3
476
429
304.8
76.2
838.2
841.4
558.8
304.8
*673.1
368.3
567.9
457
511.5
685
616
355.6
336.6
76.2
889.0
892.2
603.3
336.6
*723.9
371.9
609.6
609
537.4
921
827
406.4
387.4
101.6
990.6
993.8
685.8
387.4
*774.7
453.1
668.5
457
629.4
1126
1012
457.2
438.2
101.6
1092.2
1095.4
743.0
438.2
*850.9
489.0
741.7
609
665.2
1354
1218
508.0
489.0
127.0
1193.8
1200.2
812.8
489.0
*901.7
561.6
819.7
609
762.0
1909
1646
558.8
539.8
127.0
1295.4
1304.9
870.0
539.8
*977.9
600.2
914.4
609
800.9
2618
1965
609.6
590.6
127.0
1397.0
1406.5
939.8
590.6
*1066.8
636.3
984.5
762
836.9
3147
2394
660.4
635.0
127.0
1447.8
1460.5
1016.0
635.0
*1130.3
672.8
1060.5
914
872.2
3635
2705
711.2
685.8
190.5
1549.4
1562.1
1073.2
685.8
*1193.8
784.1
1139.4
762
1041.1
4493
3427
762.0
736.6
190.5
1651.0
1663.7
1130.3
736.6
*1244.6
826.3
1216.7
762
1083.3
5329
3968
863.6
831.9
190.5
1930.4
1946.3
1244.6
831.9
*1384.3
893.8
1371.6
1067
1150.9
7263
5766
914.4
876.3
190.5
2082.8
2098
1314.5
876.3
*1435.1
934.7
1443.5
1067
1191.8
9063
7575
1016.0
977.9
228.6
2032.0
1320.8
977.9
*1651.0
1067.3
1651.0
1067
1407.8
12202
10796
1066.8
1047.8
228.6
2108.2
1403.4
1047.8
*1689.1
1109.0
1742.4
1067
1449.5
13572
11884
1219.2
1181.1
279.4
2387.6
1593.9
1181.1
*2133
1300
1964.2
Stem
Size
mm
Raised Ring
Face
Joint
Length Length
A mm A mm
Nom
Diam.
mm
Ball
Bore
B mm
50.8
76.2
52.3
79.5
25.4
25.4
292.1
355.6
101.6
103.1
38.1
152.4
152.4
38.1
203.2
203.2
254.0
254.0
304.8
Length (A) of a weld x flanged end valve is one half the sum of lengths (A)
of a weld end and of a flange end of the same size and rating.
H
in.
Flange
Size
CONTACT
6.34
7.44
TECHNICAL DATA
www:
Weld End
C.L.
To
Bottom
C
in.
Stem
Size
in.
H
mm
Weld
20
39
18
35
* Short pattern.
Dimensions of 26" through 42" flanges are per MSS-SP-44.
(p76)
E D U C E D
P E N I N G
600 L
. C
L A S S
VA
A L L
CAMERON
LV E S
E
G
H
D1
D2
Flanged End
Size
CONTACT
CONTENTS MENU
Length
A
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in.
3.13
4.06
*11
*12.5
3.94
5.12
5
6.75
24
24
14
*14
5.94
8.5
36
16.5
*18
7.91
11.25
36
20
10
*21.5
10
15.5
33.125
22
12
*23.5
12.12
35
35.125
23.75
13.25
*26.5
39
39.125
27
15.25
*28.5
43
43.125
29.25
17.25
*30.5
17.25
47
47.25
32
19.25
22
19.25
51
51.375
34.25
24
21.25
55
55.375
26
23.25
57
28
25
30
27
32
Raised Ring
Face
Joint
Length Length
A in.
A in.
Nom
Diam.
in.
Ball
Bore
B in.
3
4
2.06
3.13
1
1
14
17
14.125
17.125
4.06
1.5
22
1.5
26
10
12
10
14
16
18
Diam.
D1
in.
Diam.
D2
in.
8.25
10.75
22.125
26.125
31
31.125
33
12
13.25
15.25
20
www:
CONTACT
Weld
6.34
7.44
80
140
72
126
8.43
230
207
10.43
570
541
24
12.55
775
697
18.5
30
14.54
1353
1217
14.5
22.36
18
20.14
1873
1684
14.64
24
24
21.16
2300
2068
17.84
26.32
18
24.78
2634
2378
*33.5
19.25
29.2
24
26.19
4110
3675
21.25
*35.5
22.11
32.27
24
30
4462
4122
37
23.25
*38.5
23.63
36
24
31.53
6117
4457
57.5
40
25
*42
25.05
38.76
30
32.95
7463
5413
61
61.5
42.25
27
*44.5
26.49
41.75
36
34.34
9002
6652
7.5
65
65.5
44.5
29
*47
30.87
44.86
30
40.99
10875
8275
29
7.5
70
70.625
47
32.75
*49
32.53
47.9
30
42.65
13085
9785
36
32.75
7.5
82
82.625
51.75
34.5
*54.5
35.19
53.64
42
45.31
17017
13517
42
34.5
7.5
83
55.25
41.25
*56.5
36.8
56.83
42
46.92
Body
Sphere
E
mm
Lever
Length
L
mm
Diameter
Handwheel
for Gear
G
mm
Flanged End
Size
TECHNICAL DATA
Weld End
C.L.
To
Bottom
C
in.
Stem
Size
in.
Weld End
Diam.
D1
mm
Diam.
D2
mm
Length
A
mm
C.L.
To
Bottom
C
mm
Flange
Weld
358.8
435.0
209.6
273.1
79.5
103.1
*279.4
*317.5
100.1
130.0
127.0
171.5
609
609
161.0
189.0
36
64
33
57
558.8
562.0
355.6
152.4
*355.6
150.9
215.9
914
214.1
104
94
660.4
663.6
419.1
203.2
*457.2
200.9
285.8
914
264.9
259
245
50.8
787.4
790.6
508.0
254.0
*546.1
254.0
393.7
609
318.8
352
316
50.8
838.2
841.4
558.8
304.8
*596.9
307.8
469.9
762
369.3
614
552
304.8
76.2
889.0
892.2
603.3
336.6
*673.1
368.3
567.9
457
511.5
850
764
406.4
336.6
76.2
990.6
993.8
685.8
387.4
*723.9
371.9
609.6
609
537.4
1043
938
457.2
387.4
101.6
1092.2
1095.4
743.0
438.2
*774.7
453.1
668.5
457
629.4
1195
1079
508.0
438.2
101.6
1193.8
1200.2
812.8
489.0
*850.9
489.0
741.7
609
665.2
1864
1667
558.8
489.0
127.0
1295.4
1304.9
870.0
539.8
*901.7
561.6
819.7
609
762.0
2024
1870
609.6
539.8
127.0
1397.0
1406.5
939.8
590.6
*977.7
600.2
914.4
609
800.9
2775
2021
660.4
590.6
127.0
1447.8
1460.5
1016.0
635.0
*1066.8
636.3
984.5
762
836.9
3385
2455
711.2
635.0
127.0
1549.4
1562.1
1073.2
685.8
*1130.3
672.8
1060.5
914
872.2
4083
3017
762.0
685.8
190.5
1651.0
1663.7
1130.3
736.6
*1193.8
784.1
1139.4
762
1041.1
4933
3754
812.8
736.6
190.5
1778.0
1793.9
1193.8
831.9
*1244.6
826.3
1216.7
762
1083.3
5935
4438
914.4
831.9
190.5
2082.8
2098.7
1314.5
876.3
*1384.3
893.8
1362.5
1067
1150.9
7719
6131
1066.8
876.3
190.5
2108.2
1403.4
1047.8
*1435.1
934.7
1443.5
1067
1191.8
Stem
Size
mm
Raised Ring
Face
Joint
Length Length
A mm A mm
Nom
Diam.
mm
Ball
Bore
B mm
76.2
101.6
52.3
79.5
25.4
25.4
355.6
431.8
152.4
103.2
38.1
203.2
152.4
38.1
254.0
203.2
304.8
254.0
355.6
Note: Venturi opening or other reduced bore valves are available upon request.
Length (A) of a weld x flanged end valve is one half the sum of lengths (A)
of a weld end and of a flange end of the same size and rating.
H
mm
* Short pattern.
Dimensions of 26" through 42" flanges are per MSS-SP-44.
HELP
(p77)
U L L
P E N I N G
900 L
. C
L A S S
VA
A L L
CAMERON
LV E S
E
G
H
D1
D2
Size
CONTACT
Flanged End
Stem
Size
in.
Raised
Ring
Face
Joint
Length Length
A in.
A in.
Weld End
C.L.
To
Bottom
C
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in.
Nom
Diam.
in.
Ball
Bore
B in.
2.06
3.13
15.125
9.5
3.13
*13.5
4.88
36
4.06
1.5
2
15
18
18.125
11.5
4.06
*15
6.77
9.25
18
24
24.125
15
*20
8.39
12.5
29
29.125
18.5
*23.5
10
15.5
10
10
33
33.125
21.5
10
*25.5
12.88
12
12
38
38.125
24
12
*29.5
14.5
14
12.75
40.5
40.875
25.25
12.75
*31.5
17.4
16
14.75
44.5
44.875
27.75
14.75
*33.5
18
16.75
48
48.5
31
16.75
20
18.625
7.5
52
52.5
33.75
24
22.5
7.5
61
61.75
41
30
29
7.5
75
75.875
48.5
36
34.5
90
91.125
57.5
Diam.
D1
in.
Diam.
D2
in.
Length
A
in.
Weld
7.44
130
117
9.76
255
225
24
10.86
675
607
30
12.55
1340
1206
18.5
18
18.49
2077
1867
22.36
24
20.14
3002
2699
24.5
24
25.3
4106
3695
19.02
27.25
24
26.92
5112
4592
*36.5
20.62
30.07
24
28.51
6600
5940
18.625
*38.5
24.22
33.88
24
35.23
8620
7750
22.5
*45
28.07
39.95
30
38.18
12400
11200
29
*52
32.53
49.88
42
42.65
22000
19800
34.5
*59.5
38.64
58.25
52.03
35000
31400
Body
Sphere
E
mm
Lever
Length
L
mm
CONTENTS MENU
Flanged End
Size
TECHNICAL DATA
www:
CONTACT
Weld End
Diam.
D2
mm
Length
A
mm
C.L.
To
Bottom
C
mm
241.3
79.5
*342.9
124.0
177.8
914
189.0
59
53
292.1
103.1
*381.0
172.0
235.0
457
247.9
116
102
612.8
381.0
152.4
*508.0
213.1
317.5
609
275.8
306
275
739.8
469.9
203.2
*596.9
254.0
393.7
762
318.8
608
547
838.2
841.4
546.1
254.0
*647.7
327.2
469.9
457
469.6
942
847
76.2
965.2
968.4
609.6
304.8
*749.3
368.3
567.9
609
511.5
1362
1224
323.9
127.0
1028.7
1038.2
641.4
323.9
*800.1
442.0
622.3
609
642.6
1863
1676
374.7
127.0
1130.3
1139.8
704.9
347.7
*850.9
483.1
692.2
609
683.8
2319
2083
457.2
425.5
127.0
1219.2
1231.9
787.4
425.5
*927.1
523.7
763.8
609
724.2
2994
2694
508.0
473.1
190.5
1320.8
1333.5
857.3
473.1
*977.9
615.2
860.6
609
894.8
3910
3515
609.6
571.5
190.5
1549.4
1568.5
1041.4
571.5
*1143.0
713.0
1014.7
762
969.8
5625
5080
762.0
736.6
190.5
1905.0
1927.2
1231.9
736.6
*1320.8
826.3
1267.0
1067
1083.3
9979
8981
914.4
876.3
228.6
2286.0
2314.6
1460.5
876.3
*1511.3
981.5
1479.6
1321.4
15876
14243
Stem
Size
mm
Raised Ring
Face
Joint
Length Length
A mm A mm
Nom
Diam.
mm
Ball
Bore
B mm
50.8
52.3
76.2
79.5
38.1
381.0
384.2
101.6
103.1
50.8
457.2
460.4
152.4
152.4
50.8
609.6
203.2
203.2
50.8
736.6
254.0
254.0
76.2
304.8
304.8
355.6
406.4
Diam.
D1
mm
Length (A) of a weld x flanged end valve is one half the sum of lengths (A)
of a weld end and of a flange end of the same size and rating.
* Short pattern.
Dimensions of 26" through 42" flanges are per MSS-SP-44.
HELP
(p78)
E D U C E D
P E N I N G
900 L
. C
L A S S
VA
A L L
CAMERON
LV E S
E
G
H
D1
D2
Flanged End
Size
Nom
Diam.
in.
Stem
Size
in.
Ball
Bore
B in.
Raised Ring
Face
Joint
Length Length
A in.
A in.
Diam.
D1
in.
Weld End
Diam.
D2
in.
Length
A
in.
C.L.
To
Bottom
C
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in.
Weld
Reduced Opening
CONTACT
2.06
15
15.125
9.5
3.13
*11
3.94
24
6.34
105
94
3.13
1.5
18
18.125
11.5
4.06
*13.5
4.88
36
7.44
197
177
4.06
24
24.125
15
*15
6.77
9.25
18
9.76
345
297
29
29.125
18.5
*20
8.39
12.5
24
10.86
825
742
10
33
33.125
21.5
10
*23.5
10
15.5
30
12.55
1590
1431
12
10
38
38.125
24
12
*25.5
12.88
18.5
18
18.49
2307
2074
14
12
40.5
40.875
25.25
12.75
*29.5
14.5
22.36
24
20.14
2893
2801
16
12.75
44.5
44.875
27.75
14.75
*31.5
17.4
24.5
24
25.3
4396
3956
C.L.
To
Bottom
C
mm
Body
Sphere
E
mm
Lever
Length
L
mm
Diameter
Handwheel
for Gear
G
mm
Flanged End
Size
CONTENTS MENU
Nom
Diam.
mm
Stem
Size
mm
Ball
Bore
B mm
Raised Ring
Face
Joint
Length Length
A mm A mm
Diam.
D1
mm
Weld End
Diam.
D2
mm
Length
A
mm
Weld
Reduced Opening
TECHNICAL DATA
76.2
101.6
52.3
79.5
25.4
38.1
381.0
457.2
384.2
460.4
241.3
292.1
79.5
103.1
*279.4
*342.9
100.1
124.0
127.0
177.8
609
914
161.0
189.0
48
89
43
80
152.4
103.1
50.8
609.6
612.8
381.0
152.4
*381.0
172.0
235.0
457
247.9
156
135
203.2
152.4
50.8
736.6
739.8
469.9
203.2
*508.0
213.1
317.5
609
275.8
374
337
254.0
203.2
50.8
838.2
841.4
546.1
254.0
*596.9
254.0
393.7
762
318.8
721
649
304.8
254.0
76.2
965.2
968.4
609.6
304.8
*647.7
327.2
469.9
457
469.6
1046
940
355.6
304.8
76.2
1028.7
1038.2
641.4
323.9
*749.3
368.3
567.9
609
511.5
1312
1270
406.4
323.9
127.0
1130.3
1139.8
704.9
374.7
*800.1
442.0
622.3
609
642.6
1994
1794
Note: Venturi opening or other reduced bore valves are available upon request.
Length (A) of a weld x flanged end valve is one half the sum of lengths (A)
of a weld end and of a flange end of the same size and rating.
* Short pattern.
Dimensions of 26" through 42" flanges are per MSS-SP-44.
www:
CONTACT
HELP
(p79)
U L L
15 0 0 L
P E N I N G
. C
L A S S
A L L
VA
CAMERON
LV E S
E
G
H
D1
D2
Flanged End
Size
Ball
Diam.
Bore
in.
B in.
2
3
2.06
3.13
1
1.5
4.06
Diam.
D1
in.
Diam.
D2
in.
Length
A
in.
C.L.
To
Bottom
C
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in.
H
in.
Flange
Weld
6.34
7.44
95
189
85
169
276
8.5
10.5
2.06
3.13
*11
*13.5
3.94
4.88
5
7
24
36
21.5
21.625
12.25
4.06
*15
6.77
9.25
18
9.76
311
27.75
28
15.5
*20
8.39
12.5
30
10.86
805
724
32.75
33.125
19
*23.5
10.95
16.38
18
16.89
1637
1473
10
10
39
39.375
23
10
*25.5
15.15
19.5
18
19.96
2435
2063
12
12
44.5
45.125
26.5
12
*29.5
17.31
23.38
24
21.8
3753
3103
14
12.75
49.5
50.25
29.5
12.75
*31.5
17.4
26
24
25.3
5208
4102
16
14.75
54.5
55.375
32.5
14.75
*33.5
19.02
29.25
30
26.92
6750
5273
18
16.75
7.5
60.5
61.375
36
16.75
*36.5
22.69
31.57
30
33.71
9050
7100
20
18.625
7.5
65.5
66.375
38.75
18.625
*38.5
24.22
34.72
30
35.23
12620
9900
24
22.5
7.5
76.5
77.625
46
22.5
*45
28.07
42.16
48
38.18
18100
14200
Nom
Ball
Diam.
Bore
Stem
Size
mm
Body
Sphere
E
mm
Lever
Length
L
mm
mm
B mm
Diameter
Handwheel
for Gear
G
mm
50.8
76.2
52.3
79.5
25.4
38.1
368.3
469.9
101.6
103.1
50.8
152.4
152.4
50.8
203.2
203.2
254.0
Flanged End
Size
Weld End
Diam.
D1
mm
Diam.
D2
mm
Length
A
mm
C.L.
To
Bottom
C
mm
Flange
Weld
371.5
473.1
215.9
266.7
52.3
79.5
*279.4
*342.9
100.1
124.0
127.0
177.8
609
914
161.0
189.0
43
66
39
77
546.1
549.3
311.2
103.1
*381.0
172.0
235.0
457
247.9
141
125
704.9
711.2
393.7
152.4
*508.0
213.1
317.5
762
275.8
365
328
76.2
831.9
841.4
482.6
203.2
*596.9
278.1
416.1
457
429.0
743
668
254.0
101.6
990.6
1000.1
584.2
254.0
*647.7
384.8
495.3
457
507.0
1105
936
304.8
304.8
101.6
1130.3
1146.2
673.1
304.8
*749.3
439.7
593.9
609
553.7
1702
1408
355.6
323.9
127.0
1257.3
1276.4
749.3
323.9
*800.1
442.0
660.4
609
642.6
2362
1861
406.4
374.7
127.0
1384.3
1406.5
825.5
374.7
*850.9
483.1
743.0
762
683.8
3062
2392
457.2
425.5
190.5
1536.7
1558.9
914.4
425.5
*927.1
576.3
801.9
762
856.2
4105
3220
508.0
473.1
190.5
1663.7
1685.9
984.3
473.1
*977.9
615.2
881.9
762
894.8
5724
4491
609.6
571.5
190.5
1943.1
1971.7
1168.4
571.5
*1143.0
713.0
1070.9
1219
969.8
8210
6441
Raised
Ring
Face
Joint
Length Length
A mm A mm
Length (A) of a weld x flanged end valve is one half the sum of lengths (A)
of a weld end and of a flange end of the same size and rating.
CONTACT
Body
Sphere
E
in.
14.625
18.625
CONTENTS MENU
www:
Raised
Ring
Face
Joint
Length Length
A in.
A in.
Weld End
14.5
18.5
CONTACT
TECHNICAL DATA
Stem
Size
in.
Nom
Normally Furnished
H
mm
* Short pattern.
HELP
(p80)
E D U C E D
P E N I N G
15 0 0 L
. C
L A S S
VA
A L L
CAMERON
LV E S
E
G
H
D1
D2
Flanged End
Size
Nom
Ball
Diam.
Bore
in.
B in.
Stem
Size
in.
Raised
Ring
Face
Joint
Length Length
A in.
A in.
Weld End
Diam.
D1
in.
Diam.
D2
in.
Length
A
in.
C.L.
To
Bottom
C
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in.
Weld
Reduced Opening
CONTACT
2.06
18.5
18.625
10.5
3.13
*11
3.94
24
6.34
130
117
3.13
1.5
21.5
21.625
12.25
4.06
*13.5
4.88
36
7.44
230
207
4.06
27.75
28
15.5
*15
6.77
9.25
18
9.76
450
401
32.75
33.125
19
*20
8.39
12.5
30
10.86
1100
990
10
39
39.375
23
10
*23.5
10.95
16.38
18
16.89
1990
1701
12
10
44.5
45.125
26.5
12
*25.5
15.15
19.5
18
19.96
2972
2530
14
12
49.5
50.25
29.5
12.75
*29.5
17.31
23.38
24
21.8
3996
3347
16
12.75
54.5
55.375
32.5
14.75
*31.5
17.4
26
24
25.3
5875
4382
C.L.
To
Bottom
C
mm
Body
Sphere
E
mm
Lever
Length
L
mm
Diameter
Handwheel
for Gear
G
mm
Flanged End
Size
CONTENTS MENU
Nom
Ball
Diam.
Bore
mm
B mm
Stem
Size
mm
Raised
Ring
Face
Joint
Length Length
A mm A mm
Weld End
Diam.
D1
mm
Diam.
D2
mm
Length
A
mm
Weld
Reduced Opening
TECHNICAL DATA
76.2
101.6
52.3
79.5
25.4
38.1
469.9
546.1
473.1
549.3
266.7
311.2
79.5
103.1
*279.4
*342.9
100.1
124.0
127.0
177.8
609
914
161.0
189.0
59
104
53
94
152.4
103.1
50.8
704.9
711.2
393.7
152.4
*381.0
172.0
235.0
457
247.9
204
182
203.2
152.4
50.8
831.9
841.4
482.6
203.2
*508.0
213.1
317.5
762
275.8
499
448
254.0
203.2
76.2
990.6
1000.1
584.2
254.0
*596.9
278.1
416.1
457
429.0
903
772
304.8
254.0
101.6
1130.3
1146.2
673.1
304.8
*647.7
384.8
495.3
457
507.0
1348
1148
355.6
304.8
101.6
1257.3
1276.4
749.3
323.9
*749.3
439.7
593.9
609
553.7
1813
1518
406.4
323.9
127.0
1384.3
1406.5
825.5
374.7
*800.1
442.0
660.4
609
642.6
2665
1988
Note: Venturi opening or other reduced bore valves are available upon request.
Length (A) of a weld x flanged end valve is one half the sum of lengths (A)
of a weld end and of a flange end of the same size and rating.
* Short pattern.
www:
CONTACT
HELP
(p81)
FULL
CAMERON
R E D U C E D O P E N I N G 2 50 0 L B . C L A S S B A L L V A L V E S
AND
E
G
H
D1
D2
Flanged End
Size
Nom
Ball
Diam.
Bore
in.
B in.
Stem
Size
in.
Full Opening
2
2.06
CONTACT
3.13
Raised
Ring
Face
Joint
Length Length
A in.
A in.
Weld End
Diam.
D1
in.
Diam.
D2
in.
Length
A
in.
C.L.
To
Bottom
C
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in.
17.75
17.875
9.25
2.06
*15
4.53
5.43
24
1.5
22.75
23
12
3.13
*18
5.67
7.5
36
H
in.
Flange
7.25
8.94
114
94
236
187
Weld
4.06
26.5
26.875
14
4.06
*20
7.24
9.75
24
11.70
471
382
36
36.5
19
*24
7.76
13.5
24
13.13
943
737
7.125
40.5
40.875
21.75
7.125
*28
12.84
18.11
24
17.88
2094
1676
10
12
8.875
10.5
4
5
50
56
50.875
56.875
26.5
30
8.875
10.5
*33
*36
14.84
16.615
20.87
24.5
24
30
20.00
24.75
2922
4506
2166
3258
1
1.5
22.75
26.5
23
26.875
12
14
3.13
4.06
*15
*18
4.53
5.67
5.43
7.5
24
36
7.25
8.94
156
286
129
247
638
1297
513
1017
2518
3566
2657
Reduced Opening
3
4
2.06
3.13
4.06
36
36.5
19
*20
7.24
9.75
24
11.7
40.5
40.875
21.75
7.125
*24
7.76
13.5
24
13.13
10
7.13
50
50.875
26.5
8.875
*28
12.84
18.11
24
17.88
12
8.875
56
56.875
30
10.5
*33
14.875
20.87
24
20
Nom
Ball
Diam.
Bore
Stem
Size
mm
Body
Sphere
E
mm
Lever
Length
L
mm
mm
B mm
C.L.
To
Bottom
C
mm
Diameter
Handwheel
for Gear
G
mm
CONTENTS MENU
Flanged End
Size
Raised
Ring
Face
Joint
Length Length
A mm A mm
Weld End
Diam.
D1
mm
Diam.
D2
mm
Length
A
mm
1916
Weld
Full Opening
TECHNICAL DATA
www:
50.8
76.2
52.3
79.5
25.4
38.1
450.9
577.9
454.0
584.2
235.0
304.9
52.3
79.5
*381.0
*457.2
115
144
138
190.5
609
914
184.2
227.1
52
107
43
85
101.6
103.1
50.8
673.1
682.6
355.6
103.1
*508.0
184
247.7
609
297.2
214
173
152.4
152.4
76.2
914.4
927.1
482.6
152.4
*609.6
248
342.9
609
333.5
428
334
203.2
181.0
101.6
1028.7
1038.2
552.5
181.0
*711.2
326
460
609
454.0
950
760
254.0
304.8
225.4
266.7
101.6
127.0
1270.0
1422.4
1292.2
1444.6
673.1
762.0
225.4
266.7
*838.2
*914.4
377.8
423
530
622.3
609
762
508.0
628.7
1325
2044
983
1478
577.9
673.1
584.2
682.6
304.8
355.6
79.5
103.1
*381.0
*457.2
115
144
138
190.5
609
914
184.2
227.1
71
130
59
98
Reduced Opening
CONTACT
76.2
101.6
52.3
79.5
25.4
38.1
152.4
103.1
50.8
914.4
927.1
482.6
152.4
*508.0
184
247.7
609
297.2
289
233
203.2
152.4
76.2
1028.7
1038.2
552.5
181.0
*609.6
248
342.9
609
333.5
588
461
254.0
181.0
101.6
1270.0
1292.2
673.1
225.4
*711.2
326
460
609
454.0
1142
869
304.8
225.4
101.6
1422.4
1444.6
762.0
266.7
*838.2
377
530
609
508.0
1618
1205
Note: Venturi opening or other reduced bore valves are available upon request.
Length (A) of a weld x flanged end valve is one half the sum of lengths (A)
of a weld end and of a flange end of the same size and rating.
HELP
(p82)
API F
L A N G E D
N D
U L L
P E N I N G
VA
A L L
CAMERON
LV E S
E
G
H
D1
D2
Size
Nom
Ball
Diam.
Bore
in.
B in.
Stem
Size
in.
Raised
Face
Length
A in.
Diam.
D1
in.
C.L.
To
Bottom
C
in.
Diam.
D2
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in.
Operator Normally
H
in.
Approx.
Flange
2.06
3.13
1
1
11.625
14.124
6.5
8.25
2.06
3.13
3.94
5.12
5
6.75
36
36
6.34
7.44
44
85
4.06
7.06
4.06
6
1.5
2
17.125
22.125
10.75
14
4.06
6
5.94
7.91
8.5
11.5
36
24
8.43
10.29
165
445
CONTACT
2.06
3.13
2.06
3.13
1
1.5
14.625
15.125
8.5
9.5
2.06
3.13
3.94
4.88
5
7
36
36
6.34
7.44
90
130
4.06
7.06
4.06
6
2
2
18.125
24.125
11.5
15
4.06
6
6.77
8.39
9.25
12.5
36
30
9.76
10.92
255
675
6.34
7.44
95
189
CONTENTS MENU
2.06
3.13
2.06
3.13
2
1.5
14.625
18.625
8.5
10.5
2.06
3.13
3.94
4.88
5
7
36
36
4.06
4.06
21.625
12.25
4.06
6.77
9.25
24
9.30
361
7.06
28
15.5
8.39
13.5
24
13.13
805
Size
Nom
Stem
Size
mm
Ball
Diam.
Bore
mm
B mm
Diam.
D2
mm
Diam.
D1
mm
Length
A mm
C.L.
To
Bottom
C
mm
Body
Sphere
E
mm
Lever
Length
L
mm
Diameter
Handwheel
for Gear
G
mm
Approx.
Flange
TECHNICAL DATA
52.3
52.3
25.4
295.3
165.1
52.3
100.1
127.0
914
161.0
20
79.5
79.5
25.4
358.8
209.6
79.5
130.0
171.5
914
189.0
39
103.1
179.3
103.1
152.4
38.1
50.8
435.0
562.0
273.1
355.6
103.1
152.4
150.9
200.9
215.9
292.1
914
609
214.1
262.4
75
202
www:
52.3
79.5
52.3
79.5
25.4
38.1
371.5
384.2
215.9
241.3
52.3
79.5
100.1
124.0
127.0
177.8
914
914
161.0
189.0
41
59
103.1
103.1
152.4
50.8
50.8
460.4
612.8
292.1
381.0
103.1
152.4
172.0
213.1
235.0
317.5
914
762
247.9
277.4
116
306
161.0
189.0
43
86
179.3
CONTACT
52.3
79.5
25.4
38.1
371.5
473.1
215.9
266.7
52.3
79.5
100.1
124.0
127.0
177.8
914
914
103.1
103.1
50.8
549.3
311.2
103.1
172.0
235.0
914
236.2
164
179.3
152.4
76.2
711.2
393.7
152.4
213.1
342.9
609
333.5
365
HELP
(p83)
CAMERON
A P I F L A N G E D E N D R E D U C E D O P E N I N G B A L L VA LV E S
E
G
H
D1
D2
Size
Nom
Ball
Diam.
Bore
in.
B in.
Stem
Size
in.
Length
A in.
Diam.
D1
in.
Diam.
D2
in.
C.L.
To
Bottom
C
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in.
14.125
17.125
22.125
8.25
10.75
14
3.13
4.06
6
3.94
5.12
5.94
5
6.75
8.5
36
36
36
15.125
18.125
24.125
9.5
11.5
15
3.13
4.06
6
3.94
4.88
6.77
5
7
9.25
Approx. Wt.
lb.
Flange
6.34
7.44
8.43
80
140
230
36
36
36
6.34
7.44
9.76
105
197
345
2.06
3.13
4.06
4.06
7.06
1
1
1.5
CONTACT
2.06
3.13
4.06
1
1.5
2
2.06
3.13
1
1.5
18.625
21.625
10.5
12.25
3.13
4.06
3.94
4.88
5
7
36
36
6.34
7.44
130
230
7.06
4.06
28
15.5
6.77
9.25
24
9.30
490
Body
Sphere
E
mm
Lever
Length
L
mm
Diameter
Handwheel
for Gear
G
mm
Size
CONTENTS MENU
Nom
Ball
Diam.
Bore
mm
B mm
Stem
Size
mm
Length
A mm
Diam.
D1
mm
Diam.
D2
mm
C.L.
To
Bottom
C
mm
209.6
273.1
355.6
79.5
103.1
152.4
100.1
130.0
150.9
127.0
171.5
215.9
914
914
914
241.3
292.1
381.0
79.5
103.1
152.4
100.1
124.0
172.0
127.0
177.8
235.0
Approx.
Wt. kg.
Flange
161.0
189.0
38
64
214.1
104
914
914
914
161.0
189.0
48
89
247.9
156
TECHNICAL DATA
52.3
79.5
103.1
25.4
25.4
38.1
358.8
435.0
562.0
52.3
79.5
103.1
25.4
38.1
50.8
384.2
460.4
612.8
www:
103.1
52.3
79.5
25.4
38.1
473.1
549.3
266.7
311.2
79.5
103.1
100.1
124.0
127.0
177.8
914
914
161.0
189.0
59
104
179.3
103.1
50.8
711.2
393.7
152.4
172.0
235.0
609
236.2
222
CONTACT
HELP
(p84)
A L L
VA
CAMERON
LV E S
SD-24030
CONTACT
24
26.63 26.63
28.20
28.20
32.18
26
29.59 29.59
29.59
29.59
28
30.97 30.97
30.97
34.99
CONTACT
30
32.62 32.62
32.62
36.65
36.65
34
35.26 35.26
39.31
39.31
36
36.85 40.92
40.92
40.92
44.65
40
44.25 44.25
44.25
48.05
42
45.89 45.89
45.89
49.69
48
50.04 50.04
54.02
56.50
Bore
Size
(mm)
50.8
76.2
101.6
152.4
203.2
254.0
304.8
355.6
406.4
457.2
508.0
558.8
609.6
660.4
711.2
762.0
812.8
914.4
1016.0
1066.8
1219.2
1500
4.06
4.76
6.61
8.23
13.45
15.96
17.80
20.55
22.17
27.71
29.23
www:
32.18
150
103.12
129.03
147.06
194.06
251.97
302.51
424.18
450.09
484.63
563.63
603.25
640.59
676.40
751.59
786.64
828.55
895.60
935.99
1123.95
1165.61
1271.12
300
103.12
129.03
147.06
194.06
251.97
302.51
424.18
450.09
484.63
563.63
603.25
640.59
676.40
751.59
786.64
828.55
895.60
1039.37
1123.95
1165.61
1271.12
Dimension A (mm)
ANSI Pressure Class
400
600
900
103.12 103.12 103.12
129.03 129.03 120.90
147.06 147.06 167.89
194.06 194.06 209.04
251.97 251.97 251.97
302.51 302.51 382.27
424.18 424.18 424.18
450.09 450.09 521.97
527.81 527.81 563.12
563.63 563.63 603.50
641.35 641.35 742.44
680.21 680.21
786.64 888.75
1165.61 1262.13
1372.11 1435.10
HELP
(p85)
1500
103.12
120.90
167.89
209.04
341.63
405.38
452.12
521.97
563.12
703.83
742.44
817.37
A L L
CAMERON
A L V E S
SD-016398
SD-016397
CONTACT
Cameron Ball Valve Square Nut and Adapter Flange Mounting Dimensions (BX-1220)
CONTENTS MENU
TECHNICAL DATA
Dash Number
Valve Stem Size
A - Flange Dia (in.)
B - Boss Dia (in.)
C - Height of Nut (in.)
D - Bolt Size (in.)
F - Width of Nut (in.)
H - Number of Holes
J - Dia Bolt Circle (in.)
Bolt Size
-1
1
6.50
4.747
1.94
0.44
1.5
8
5.75
3/8-16
NC-2
30
-2
1.50
6.50
4.747
2.12
0.54
2.0
8
5.75
3/8-16
NC-2
30
-3
2
8.75
6.997
2.62
0.66
2.5
16
8.00
3/8-16
NC-2
30
Dash Number
Valve Stem Size
A - Flange Dia (mm)
B - Boss Dia (mm)
C - Height of Nut (mm)
D - Bolt Size (mm)
F - Width of Nut (mm)
H - Number of Holes
J - Dia Bolt Circle (mm)
Bolt Size
-1
25.40
165.10
120.57
49.28
11.18
38.10
8
146.05
3/8-16
NC-2
40.68
-2
38.10
165.10
120.57
53.85
13.72
30.80
8
146.05
3/8-16
NC-2
40.68
-3
50.80
222.25
177.72
66.55
16.76
63.50
16
203.20
3/8-16
NC-2
40.68
www:
F
E
CONTACT
HELP
SD-016399
SD-016400
(p86)
A L L
CAMERON
A L V E S
Cameron Ball Valve Keyed Shaft and Adapter Flange Mounting Dimensions (BX-1221)
CONTACT
Dash Number
Valve Stem Size
A - Number of Holes
C - Dia Bolt Circle (in.)
E - Max Shaft Dia (in.)
F - Boss Dia (in.)
H - Shaft to Slot ID (in.)
J - Height of Nut (in.)
K - Flange Dia (in.)
N - Flange Thickness (in.)
Q - Key Width (in.)
R - Height of Boss (in.)
S - Overall Height (in.)
V - Adapter Flange
V - Thickness (in.)
-4
3
16
10.375
2.745
9.122
2.402
4.75
11.50
0.63
0.625
3.75
6.120
1.00
-5
4
16
17.25
3.245
16.246
2.831
5.310
18.25
0.63
0.75
4.310
7.00
1.00
-6
5
24
18.375
4.495
17.121
3.786
6.25
19.380
0.63
1.25
5.250
8.120
1.00
-7
7.5
24
24.00
5.495
21.746
4.803
8.50
25.75
1.00
1.25
7.50
11.00
1.00
-8
9
24
31.00
6.245
28.308
5.409
9.13
32.75
1.00
1.50
8.13
11.75
1.00
-9
11
28
27.50
8.995
25.496
7.887
13.31
30.00
1.25
2.00
12.00
16.12
1.25
- 10
13
28
27.50
8.995
25.496
6.774
13.31
30.00
1.25
2.00
12.00
15.84
1.25
1/2-13
NC-2
1/2-13
NC-2
1/2-13
NC-2
7/8-9
NC-2
7/8-9
NC-2
1-1/4-8
NC-2
1-1/4-8
NC-2
1-1/4-8
NC-2
60
60
63
330
330
1000
1000
1600
- 11
381.00
32
914.40
- 11
15
32
36.00
33.496
19.25
39.00
1.50
2.25
17.50
21.50
1.50
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
Dash Number
Valve Stem Size
A - Number of Holes
C - Dia Bolt Circle (mm)
E - Max Shaft Dia (mm)
F - Boss Dia (mm)
H - Shaft to Slot ID (mm)
J - Height of Nut (mm)
K - Flange Dia (mm)
N - Flange Thickness (mm)
Q - Key Width (mm)
R - Height of Boss (mm)
S - Overall Height (mm)
V - Adapter Flange
V - Thickness (mm)
-4
76.20
16
263.53
69.73
231.69
61.01
120.65
292.10
16.00
15.88
95.25
155.45
25.40
-5
101.60
16
438.15
82.43
412.64
71.91
134.88
463.55
16.00
19.05
109.48
177.80
25.40
-6
127.00
24
466.73
114.18
434.87
96.16
158.75
492.26
16.00
31.75
133.35
206.25
25.40
-7
190.50
24
609.60
139.58
552.34
122.00
215.90
654.05
25.40
31.75
190.50
279.40
25.40
-8
228.60
24
787.40
158.63
719.02
137.38
231.91
831.85
25.40
38.10
206.51
298.45
25.40
-9
279.40
28
698.50
228.48
647.59
200.32
338.03
762.00
31.75
50.80
304.80
409.45
31.75
- 10
330.20
28
698.50
228.48
647.59
172.05
338.03
763.00
31.75
50.80
304.80
402.34
31.75
488.95
990.60
38.10
57.15
444.50
546.10
38.10
1/2-13
NC-2
1/2-13
NC-2
1/2-13
NC-2
7/8-9
NC-2
7/8-9
NC-2
1-1/4-8
NC-2
1-1/4-8
NC-2
1-1/4-8
NC-2
81
81
85
447
447
1356
1356
2169
HELP
(p87)
850.79
A L L
CAMERON
A L V E S
Q
M
N
N
Mastergear
CONTACT
Stem
Size
(in.)
Model
Effective No. Of
Ratio
Turns
Per 90
Dynatorque
M
(in.)
N
(in.)
P
(in.)
Q
(in.)
Stem
Size
(in.)
Model
Effective No. Of
Ratio
Turns
Per 90
M
(mm)
N
(mm)
P
(mm)
Q
(mm)
R
(mm)
MG
11.1
11.5
3.63
4.66
2.50
3.38
MG
11.1
11.5
92.20
118.36
63.5
85.85
1.5
MG
11:1
11.5
3.63
4.66
2.50
3.38
1.5
MG
11:1
11.5
92.20
118.36
63.5
85.85
MG
18.3:1
18.0
4.75
5.14
2.63
5.38
MG
18.3:1
18.0
120.65 130.55
66.80
136.65
MG
52:1
45.0
6.10
6.76
5.91
5.43
MG
52:1
45.0
Q
N
CONTENTS MENU
P
P
M
SD-24022
SD-24023
Model RC250
TECHNICAL DATA
Model RC431
Stem
Size
(in.)
Model
Effective
Ratio
No. Of
Turns
Per 90
M
(in.)
N
(in.)
P
(in.)
Q
(in.)
Stem
Size
(in.)
Model
Effective
Ratio
No. Of
Turns
Per 90
M
(mm)
N
(mm)
P
(mm)
Q
(mm)
92.27
250
11:1
11.5
3.27
5.12
2.17
3.76
250
11:1
11.5
83.06
130.05
55.12
1.5
250
11:1
11.5
3.27
5.12
2.17
3.76
1.5
250
11:1
11.5
83.06
130.05
55.12
92.27
431
22:1
18
4.39
5.67
4.21
5.43
431
22:1
18
111.51
144.02
144.02
137.92
www:
Manual Gear Dimensions for Cameron Ball Valves 3" and Larger
CONTACT
SD-24025
SD-24024
Model WG1/B6
Stem
Size
(in.)
Model
1/B6
1/B6
1/S12
153:1
HELP
Effective
Ratio
Model WG1/S12
Stem
Size
(in.)
Effective
Ratio
No. Of
Turns
Per 90
No. Of
Turns
Per 90
M
(in.)
N
(in.)
P
(in.)
Q
(in.)
55:1
60
5.75
7.56
4.11
12.64
1/B6
55:1
110:1
112.5
9.13
8.69
4.69
12.64
1/B6
110:1
190
9.69
10.25
5.50
9.50
1/S12
153:1
190
Model
M
(mm)
N
(mm)
P
(mm)
Q
(mm)
60
146.05
192.02
104.39
321.06
112.5
236.22
220.73
119.30
321.06
246.13
260.35
137.70
241.30
7.5
1/S12
297:1
297
12.88
12.63
6.63
14.00
7.5
1/S12
297:1
297
327.15
320.80
168.40
355.60
1/S12
432:1
428
16.38
14.77
7.39
19.50
1/S12
432:1
428
416.05
375.16
187.71
495.30
(p88)
A L L
CAMERON
A L V E S
1/
3/
1/
3/
.405
.540
.675
.840
1.050
1.315
1 1/4
1.660
CONTACT
1 1/2
1.900
2.375
2 1/2
2.875
3.500
3 1/2
4.000
4.500
5.563
6.625
8.625
10
10.750
12
12.750
14
14.000
16
16.000
18
18.000
20
20.000
24
24.000
30
30.000
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
Wall
I.D.
Schedule
10
Schedule
20
Schedule
30
Standard
Weight
Schedule
40
Schedule
60
Schedule
100
Schedule
120
Schedule
140
Schedule
160
Dbl Ex.
Strong
.068
.068
.095
.095
I.D.
.269
.269
.215
.215
Wall
.088
.088
.119
.119
I.D.
.364
.364
.302
.302
Wall
.091
.091
.126
.126
I.D.
.493
.493
.423
.423
Wall
.109
.109
.147
.147
.187
.294
I.D.
.622
.622
.546
.546
.466
.252
Wall
.113
.113
.154
.154
.218
.308
I.D.
.824
.824
.742
.742
.614
.434
.358
Wall
.113
.113
.179
.179
.250
I.D.
1.049
1.049
.957
.957
.815
.599
Wall
.140
.140
.191
.191
.250
.382
I.D.
1.380
1.380
1.278
1.278
1.160
.896
Wall
.145
.145
.200
.200
.281
.400
1.100
I.D.
1.610
1.610
1.500
1.500
1.338
Wall
.154
.154
.218
.218
.343
.436
I.D.
2.067
2.067
1.939
1.939
1.689
1.503
Wall
.203
.203
.276
.276
.375
.552
I.D.
2.469
2.469
2.393
2.323
2.125
1.771
Wall
.216
.216
.300
.300
.438
.600
I.D.
3.068
3.068
2.900
2.900
2.624
2.300
Wall
.226
.226
.318
.318
.636
I.D.
3.548
3.548
3.364
3.364
2.728
Wall
.237
.237
.337
.337
.438
.531
.674
I.D.
4.026
4.026
3.826
3.826
3.624
3.438
3.152
Wall
.258
.258
.375
.375
.500
.625
.750
I.D.
5.047
5.047
4.813
4.813
4.563
4.313
4.063
Wall
.280
.280
.432
.432
.562
.718
.864
I.D.
6.065
6.065
5.761
5.761
5.501
5.189
4.897
Wall
.250
.277
.322
.322
.406
.500
.500
.593
.718
.812
.906
.875
I.D.
8.125
8.071
7.981
7.981
7.813
7.625
7.625
7.439
7.189
7.001
6.813
6.875
Wall
.250
.307
I.D.
10.250
10.136
Wall
.250
.330
I.D.
12.250
12.090
Wall
.250
.312
.375
I.D.
13.500
13.375
13.250
.365
.365
.500
.500
.593
.718
.843
1.000
1.125
10.020
10.020
9.750
9.750
9.564
9.314
9.064
8.750
8.500
.375
.406
12.000
11.938
.375
.438
13.250
13.124
.562
11.626
.593
12.814
.687
11.376
.500
.750
13.000
12.500
.843
1.000
1.125
1.312
11.064
10.750
10.500
10.126
.937
1.093
1.250
1.406
12.126
11.814
11.500
11.188
.250
.312
.375
.375
.500
.500
.843
1.031
1.218
1.438
1.593
I.D.
15.500
15.375
15.250
15.250
15.000
14.688
15.000
14.314
13.938
13.564
13.124
12.814
Wall
I.D.
.250
17.500
.312
17.375
.438
17.124
.375
17.250
.562
16.876
.750
16.500
.500
17.000
.937
16.126
1.156
15.688
1.375
15.250
1.562
14.876
1.781
14.438
Wall
.250
.375
.500
I.D.
19.500
19.250
19.000
Wall
.250
.375
.562
I.D.
23.500
23.250
22.875
Wall
.312
.500
.625
I.D.
29.376
29.000
28.750
.375
.593
19.250
18.184
.375
.687
23.250
22.626
.656
.500
11.750
Wall
.812
18.376
.968
22.064
.500
1.031
1.281
1.500
1.750
1.968
19.000
17.938
17.438
17.000
16.500
16.064
.500
1.218
1.531
1.812
2.062
2.343
23.000
21.564
20.938
20.376
19.876
19.314
.375
.500
29.250
29.000
HELP
Schedule
80
Wall
Note: That schedule 40 in sizes 12" and larger and that Schedule 80 in
sizes 10" and larger do not agree with Schedules 40s and 80s of ASA
B36.19 nor with standard weight and extra strong respectively.
Extra
Strong
(p89)
Y N A
E A L
370CT T
R U N N I O N
VA
A L L
W-K-M
LV E S
1/2
2 Regular Port
Key
Stop Plate
Cap Screw
Bonnet Cap
Stem
Compression Ring
Packing Cup
CONTACT
Stem Gasket
Body
CONTENTS MENU
Tailpiece Gasket
Seat Ring
"O" Ring
Tailpiece
Ground Spring
Body Drain Fitting
Bearing
Trunnion Block
SD-11557-96
TECHNICAL DATA
www:
CONTACT
Pressure Class
HELP
Size (in)
4
6x4
6
8x6
8
10 x 8
10
12 x 10
12
14 x 12
API 6D
150
300
(p90)
Y N A
E A L
370CT T
R U N N I O N
VA
A L L
W-K-M
LV E S
Part
Tailpiece
CS NACE
24
Body
A216 GrWCC
A352 GrLCC
A351 GrCF8M
Tailpiece
A216 GrWCC
A352 GrLCC
A351 GrCF8M
Cast
A216 GrWCC
A352 GrLCC
A351 GrCF8M
CS
316 SS
316 SS
A193 GrB7
A320 GrL7
A194 Gr2H
A320 Gr7L
Trunnion Blocks
Carbon Steel
Studs
Nuts
Body Drain Fittings
Packing
Adjust
316 SS
CS
SS
Bonnet Cap
CONTACT
Carbon Steel
Low Temp. NACE
37
A216 GrWCC
A351 GrCF8M
Alloy Steel
303 SS
Alloy Steel
A193 GrB7
A320 GrL7
A193 GrB7
Zinc Plate
A194 Gr2H
A194 Gr7L
A194 Gr2H
Zinc Plate
Ground Spring
SS
Note: Trims 21, 23 and 24 are suitable for temperatures from -20F to
350F; trim 37 is suitable for temperatures from -50F to 350F.
CONTENTS MENU
Seal Group Trim Code
TECHNICAL DATA
Part
TH
TA
TAF
Fire-Tested
Temperature Limits
-50F to 250F
-20F to 350F
-20F to 350F
Seat Inserts
Filled TFE
Filled TFE
Filled TFE
Seat O-Ring
Hydrin
Viton
Viton
Stem Gaskets
Filled TFE
Filled TFE
Filled TFE
Stem Packing
(Graphite) TFE
(Graphite) TFE
(Graphite) TFE
Tailpiece Gasket
TFE
TFE
TFE
www:
Internal Group Trim Number
CONTACT
Carbon Steel
21
Part
Ball
Stem
CS Zn Plt
Stem Retainer
CS
CS
Pipe Plug
316 SS
316 SS
Seat Ring
CS NACE
Low Temp
37
CS NACE
24
316 SS
CS
SS
Compression Ring
CS ENP
Trunnion Bearings
CS/ TFE
SS
SS/ TFE
HELP
(p91)
Y N A
E A L
370CT T
R U N N I O N
VA
A L L
W-K-M
LV E S
Dimensions
Optional Actuator Mounting Brackets
P
G
W
F
See Note
D
See Note
A
SD-11558
CONTACT
M = Stem Diameter
R = Key
Q
N
Actuator mounting bracket for 4" and 6"
full bore valves.
CONTENTS MENU
Note: Flange holes are tapped 3/4-10 NC on 6" Fig. 150 Short Pattern (Both Ends), Full Bore Valves.
3/4-10 NC 6" Fig. 150 Long Pattern (Body End only), Full Bore Valve.
3/4 NC-10NC 8" Fig. 150 Short Pattern ( Tail Piece End only), Regular Port Valves.
1"-8 NC 10" 300 Short Pattern Both Ends
TECHNICAL DATA
150
150
300
300
300
Long
Short
Long
Short
BW
RF
www:
CONTACT
RJ
RF RJ RF RJ
85/8
RF
RJ
6x4
NA
157/8
45/8
97/8
36
79/16
11/4
20
29/16 113/8
1/4
105/8 85/8
31/2
31/2
9/16
27/16
8x6
48
97/16
11/2
20
31/8 113/8
3/8
1215/16 11
31/2
31/2
9/16
27/16
10x8
21 211/2 NA NA 223/8 23
81/8 163/8
NA
NA
22
10
121/2 23/8
20
45/8 133/8
5/8
53/4
11/16
NA
25
10
12 913/16 181/2
151/8 215/16 20
45/8 133/8
3/4
53/4
11/16
14x12 27 271/2 NA NA
12
14
12
201/8
163/8 215/16 20
45/8 133/8
3/4
53/4
11/16
30 305/8 NA
NA
30
12
14
12
201/8
163/8 215/16 20
915/16 137/8
3/4
53/4
11/16
45/8
85/8
97/8
36
79/16
11/4
20
29/16 113/8
1/4
31/2
9/16
27/16
63/8
113/8
125/8
48
97/16
11/2
20
31/8
113/8
3/8
1215/16
11
31/2
31/2
9/16
27/16
81/8
163/8
23/8
20
45/8
133/8
5/8
189/16
1511/16
73/4
53/4
11/16
14x12
HELP
150
150
300
300
300
Long
Short
Long
Short
BW
RF
RJ
91/2
RF RJ RF RJ
NA NA 12
125/8
151/2
16
101/2
11
157/8
161/2
181/2
NA NA
193/4
203/8
RF
RJ
NA
NA
12
NA
NA
157/8
161/2
171/8
161/2
18
121/2
10
21 211/2 NA NA 223/8 23
18 185/8
22
10
10 913/16 181/2
151/8 215/16 20
45/8 133/8
3/4
53/4
11/16
12
24 241/2 NA NA
12
12
12
201/8
163/8 215/16 20
45/8 133/8
3/4
53/4
11/16
12
251/2 261/8 NA NA
25
12
12
12
201/8
163/8 215/16 20
915/16 133/8
3/4
53/4
11/16
DynaSeal 370CT ball valves available in flanged (raised face and ring
joint) and butt weld.
(p92)
Y N A
E A L
370CT T
R U N N I O N
VA
A L L
W-K-M
LV E S
End Connection
Class 150
BW
FL
BW
FL
BW
FL
BW
FL
BW
FL
BW
FL
BW
FL
BW
FL
BW
FL
BW
FL
79
98
139
118
189
162
237
217
273
423
365
446
686
771
816
867
873
1136
1070
1178
4
64
6
86
8
10 8
CONTACT
10
12 10
12
14 12
CONTENTS MENU
Class 300
79
122
139
175
189
221
237
293
273
472
365
582
686
934
816
1047
873
1310
1070
1398
Valve Bore
Size (in)
0-150
275
720
4
6
8
10
12
1248
2748
5248
8124
14748
1440
3240
6500
10250
17752
2520
5760
10992
18000
27600
Note: The torque values listed are based on valves controlling the
flow of clean ladings at ambient temperatures. These are the maximum
breakaway torques. Running torques will generally average 1/3 of these
values. Reseating torques will average 3/4 of these values. For operating
temperatures between -20F to -50F, multiply these values by 1.20.
Consult factory when valves are to be used in high flow conditions.
TECHNICAL DATA
Class 150
4
6x4
6
8x6
8
10 x 8
10
12 x 10
12
14 x 12
www:
CONTACT
Valve
Size (in)
CV*
2450
35
35
40
40
95
95
95
95
95
95
260
260
*Flow
6x4
855
5265
8x6
2275
10485
10 x 8
4290
10
17330
12 x 10
6635
12
26030
14 x 12
11160
HELP
(p93)
Y N A
370
E A L
W-K-M
E R I E S
How to Order
2
E4
600
RF x RF
21
21
Size
Inches
Valve
Model
Pressure
Class
End
Connections
Body
Group
Seat
Group
Seal
Group
Internal
Group
370CT
370E4
370D4
Carbon Steel
Stainless Steel NACE
Carbon NACE
2 MILS ENC NACE
Carbon Low Temp. NACE
Viton
Buna
EPR*
Hydrin
Hi-Fluorine Viton
21
23
24
27
37
CONTENTS MENU
Actuation
Bare Stem
BS
Wrench
WR
Worm Gear WGA
2" Square Nut SQ
Less Gear
(with mounting plate) L/G
Note: Please refer to trim charts in each section (Model 370E4, 370CT,
370D4) of the catalog for specific application details including the
availability of fire-tested materials. Please contact the factory for the
availability of trims other than those listed or for proper application of
the trims listed. Available end connections: RF, RTJ.
(Weld ends consult factory)
A
B
N
T
Y
Z
Carbon Steel
Stainless Steel NACE
Carbon NACE
3 MILS ENC NACE
Carbon Low Temp. NACE
www:
CONTACT
HELP
21
23
24
27
37
TECHNICAL DATA
Viton
Buna
Nylon 12
PTFE
Nylon 6
Tefzel
CONTACT
A
B
E
H
F
(p94)
Y N A
E A L
370D4 T
R U N N I O N
VA
A L L
W-K-M
LV E S
Body
Optional Stem Sealant
Injection Fitting
Stem Stop
Stop Plate
Stem O-Rings
Stem Seal
Stem
Stem Bearing
CONTACT
Grease Fitting
Ball
Seat Assembly
Studs
Seat Spring
Nuts
Seat O-Rings
Body Tailpiece
O-Ring
Trunnion Bearing
CONTENTS MENU
Tailpiece
Trunnion
Grounding Spring
Trunnion O-Ring
Lower Cover Plate
Screw/Bolts - Trunnion
Grease Fitting
TECHNICAL DATA
Check Valve
www:
CONTACT
HELP
Size (in.)
300
600
900
2
32
3
43
4
64
(p95)
Y N A
E A L
370D4 T
R U N N I O N
VA
A L L
W-K-M
LV E S
Standard Materials, End Entry Ball Valves, 2" 6" 4" Class 150 through 900
Body Group Trim Number
Carbon Steel
21
Part
CS NACE
24
Body
A216 Gr WCC
A352 Gr LCC
A351 Gr CF8M
Tailpiece
A216 Gr WCC
A352 Gr LCC
A351 Gr CF8M
Studs
A193 Gr B7
A193 Gr B7M
A320 Gr L7M
Nuts
A194 Gr 2H
A194 Gr 2HM
A194 Gr 7ML
Screw/Bolts
Trunnion
A574/A193 Gr B7
A193 Gr B7M
A320 Gr L7M
A193 Gr B7M
(Zinc Plt)
Stem Stop
CS (Zinc Plt)
Stem Bearing
CS/TFE
SS/TFE
Trunnion Bearing
CS/TFE
SS/TFE
Fittings
CONTACT
CS
SS
Stop Plate
CS
Wrench
Ductile Iron
CS
4130
Note: Trims 21, 23 and 24 are suitable for ambient temperatures from
-20F to 350F, trim 37 is suitable for ambient temperatures from -50F
to 350F.
CONTENTS MENU
Carbon Steel
Low Temp. NACE
37
316 SS
YH
YAF
Fire Tested
Temperature Limits
-50F to +250F
-20F to +250F
Nylon
Nylon
Stem Seal
TECHNICAL DATA
www:
Filled TFE
Stem O Rings
Hydrin
Viton
Body Tailpiece
O Ring
Hydrin
Viton
Seat O Rings
Hydrin
Viton
Trunnion O Ring
Hydrin
Viton
CONTACT
Part
A105 CS ENP
Stem
4130/4140 AS ENP
Trunnion
4130/4140 AS ENP
1018/1029 CS ENP
Seat Retainer
1018/1029 CS ENP
A182 Gr 316 SS
Seat Spring
CS
B637 X750
Grounding Spring
Ball
HELP
Carbon Steel
Low Temp. NACE
37
CS NACE
24
SS
(p96)
Y N A
E A L
370D4 T
R U N N I O N
VA
A L L
W-K-M
LV E S
Standard Materials, End Entry Ball Valves, 6" 8" 6" Class 150 through 300
Body Group Trim Number
Carbon Steel
21
Part
CS NACE
24
Body
A216 Gr WCC
A352 Gr LCC
A351 Gr CF8M
Tailpiece
A216 Gr WCC
A352 Gr LCC
A351 Gr CF8M
A320 Gr L7M
Studs
A193 Gr B7
A193 Gr B7M
Nuts
A194 Gr 2H
A194 Gr 2HM
A194 Gr 7ML
BoltTrunnion
A193 Gr B7
A193 Gr B7M
A320 Gr L7M
Stem Bearing
CS / TFE
SS / TFE
Trunnion Bearing
CS / TFE
SS / TFE
Fittings
CS
SS
Stop Plate
CS
Wrench
Ductile Iron
Adapter Plate
CS
CONTACT
CS
4130
Note: Trims 21, 23 and 24 are suitable for ambient temperatures from
-20F to 350F, trim 37 is suitable for ambient temperatures from -50F
to 350F.
CONTENTS MENU
Carbon Steel
Low Temp. NACE
37
316 SS
TECHNICAL DATA
YAF
Fire Tested
Part
YH
Temperature Limits
-50F to +250F
-20F to +250F
Nylon
Nylon
Nylon
www:
Nylon
Stem O Rings
Hydrin
Viton
Body Tailpiece
O Ring
Hydrin
Viton
Seat O Rings
Hydrin
Viton
Trunnion O Ring
Hydrin
Viton
CONTACT
Internal Group Trim Number
Carbon Steel
21
Part
Ball
A105 CS ENP
Stem
4130/4140 AS ENP
4130/4140 AS ENP
1018/1029 CS ENP
Seat Retainer
1018/1029 CS ENP
A182 Gr 316 SS
Seat Spring
Trunnion
HELP
Carbon Steel
Low Temp. NACE
37
CS NACE
24
CS
B637 X750
Grounding Spring
SS
Stem Retainers
(p97)
Y N A
E A L
370D4 T
R U N N I O N
VA
A L L
W-K-M
LV E S
Part
CS NACE
24
Body
A216 Gr WCC
A352 Gr LCC
A351 Gr CF8M
Tailpiece
A216 Gr WCC
A352 Gr LCC
A351 Gr CF8M
CS
4130
316 SS
Studs
A193 Gr B7
A193 Gr B7M
A320 Gr L7M
Nuts
A193 Gr 2H
A194 Gr 2HM
A194 Gr 7ML
Cap Screws
Alloy Steel
A193 Gr B7M
A320 Gr L7M
Fittings
CS
Pipe Plugs
CS
SS
SS
Adapter Plate
CS
Note: Trims 21, 23 and 24 are suitable for ambient temperatures from
-20F to 350F, trim 37 is suitable for ambient temperatures from -50F
to 350F.
CONTACT
Carbon Steel
Low Temp. NACE
37
Part
YH
Temperature Limits
-50F to 250F
CONTENTS MENU
-20F to 250F
TECHNICAL DATA
Nylon
Hydrin
Viton
Hydrin
Viton
Seat O-Ring
Hydrin
Viton
Hydrin
Viton
Nylon
Nylon
www:
Internal Group Trim Number
CONTACT
Carbon Steel
21
Part
Ball
Stem / Trun
4130-4140 AS ENC
Seat Rings
A182 Gr 316/
A351 GrCF8M
Seat Springs
HELP
CS
B637 X750
Sleeve Bearings
SS / TFE
Thrust Washers
SS
Ground Springs
SS
Stem Retainers
Dowel Pins
Carbon Steel
Low Temp. NACE
37
CS NACE
24
(p98)
Y N A
E A L
370D4 T
R U N N I O N
VA
A L L
W-K-M
LV E S
Cap Screws
Operator Adapter
Key
Packing/Injection
Fitting
Thrust Washer
Injection Fitting
Stem
Check Fitting
Body
Backup Ring
O-Ring
CONTACT
Backup Ring
Stem Dowel
Pin
Injection
Fitting
Tailpiece
Stem Retainer
Seat
Spring
Tailpiece
O-Ring
Pipe Plug
Seat O-Ring
CONTENTS MENU
Body Stud
Ground Spring
Seat
Body Drain
Fitting
Name Plate
Trunnion
O-Ring
Trunnion Bearing
SD-11445
TECHNICAL DATA
www:
CONTACT
HELP
Size (in.)
900
6
86
8
10 8
10
12 10
12
14 12
(p99)
Y N A
E A L
370D4 T
R U N N I O N
VA
A L L
W-K-M
LV E S
N
M
P=KEYWAY
L STEM DIA
R=HOLE SIZE
NO. OF HOLES
S
BB
DIA
B
BORE
CONTACT
H
TECHNICAL DATA
RF
RJ
22
86
BB
22.12
7.12
9.43
11.25
1.503
7.50
9.06
.382
.56-(8)
.875
26
26.12
7.12
9.43
11.25
1.503
7.50
9.06
.382
.56-(8)
.875
26
26.12
9.25
11.75
14.81
1.685
8.00
9.25
.382
.69-(8)
1.06
10 8
31
31.12
10
9.25
11.75
14.81
1.685
8.00
9.25
.382
.69-(8)
1.06
10
31
31.12
10
10
11.38
13.81
16.93
2.003
7.50
9.50
.506
.56-(8)
1.12
12 10
33
33.12
10
12
11.38
13.81
16.93
2.003
7.50
9.50
.506
.56-(8)
1.12
12
33
33.12
12
12
13.93
16.13
19.50
2.560
10.25
12.50
.631
.69-(8)
1.25
1412
35
35.12
12
14
13.93
16.13
19.50
2.560
10.25
12.50
.631
.69-(8)
1.25
www:
*Butt
CONTACT
Valve
Size (in)
HELP
Valve
Size (in)
RF
RJ
24
86
BB
24.12
8.06
10.06
13.12
1.685
8.00
9.25
.382
.56-(8)
1.06
29
29.12
8.06
10.06
13.12
1.685
8.00
9.25
.382
.56-(8)
1.06
29
29.12
10.31
12.38
15.31
2.003
7.50
9.50
.506
.56-(8)
1.12
10 8
33
33.12
10
10.31
12.38
15.31
2.003
7.50
9.50
.506
.56-(8)
1.12
10
33
33.12
10
10
12.25
14.50
18.93
2.560
10.25
12.50
.631
.69-(8)
1.25
12 10
38
38.12
12
12
12.25
14.50
18.93
2.560
10.25
12.50
.631
.69-(8)
1.25
12
38
38.12
12
12
14.87
17.75
21.56
2.745
10.25
12.50
.631
.69-(8)
1.62
1412
40.5
40.87
12
14
14.87
17.75
21.56
2.745
10.25
12.50
.631
.69-(8)
1.62
(p100)
Y N A
E A L
370D4 T
R U N N I O N
VA
A L L
W-K-M
LV E S
Stem, Lever and Handle 2" 6"x4" Class 150 and 300
P=STEM FLAT
L STEM DIA
K
J
BB
DIA
B
BORE
CONTACT
H
TECHNICAL DATA
www:
32
Size
43
64
RF
RJ
RF
RJ
RF
RJ
RF
RJ
RF
RJ
RF
RJ
7.00
7.50
8.00
8.50
8.00
8.50
9.00
9.50
9.00
9.50
15.50
16.00
2.00
3.00
3.00
4.00
4.00
BB
2.00
3.00
4.00
4.00
6.00
4.69
5.54
6.72
3.29
4.81
7.03
4.80
6.38
8.55
1.112
1.112
1.489
.688
.688
.989
CONTACT
Class 300 Dimensions (inches)
HELP
32
Size
43
64
RF
RJ
RF
RJ
RF
RJ
RF
RJ
RF
RJ
RF
RJ
8.50
9.12
11.12
11.75
11.12
11.75
12.00
12.63
12.00
12.63
15.88
16.50
2.00
3.00
3.00
4.00
4.00
BB
2.00
3.00
4.00
4.00
6.00
4.69
5.54
6.72
3.29
4.81
7.03
4.80
6.38
8.55
1.112
1.112
1.489
.688
.688
.989
(p101)
Y N A
E A L
370D4 T
R U N N I O N
VA
A L L
W-K-M
LV E S
Stem, Lever and Handle 2" 6"x 4" Class 600 and 900
P=STEM FLAT
L STEM DIA
K
J
BB
DIA
B
BORE
CONTACT
H
CONTENTS MENU
Size
A
RJ
RF
RJ
RF
RJ
RF
RJ
RF
RJ
RF
RJ
11.50
11.62
14.00
14.12
14.00
14.12
17.00
17.12
17.00
17.12
22.00
22.12
2.00
BB
*Butt
3.00
2.00
4.00
3.00
4.00
5.54
6.00
4.69
3.29
4.81
7.03
4.80
6.38
8.55
www:
CONTACT
64
RF
TECHNICAL DATA
43
5.29
6.72
1.112
1.489
.688
.989
Size
A
RJ
RF
RJ
RF
RJ
RF
RJ
RF
RJ
RF
RJ
14.50
14.62
15.00
15.12
15.00
15.12
18.00
18.12
18.00
18.12
24.00
24.12
2.00
BB
3.00
2.00
4.00
3.00
4.00
4.69
3.73
4.81
7.03
5.25
6.38
8.55
5.54
5.68
6.00
HELP
64
RF
43
6.85
1.112
1.489
.688
.989
(p102)
Y N A
E A L
370D4 T
R U N N I O N
VA
A L L
W-K-M
LV E S
Weight
2250
30
811
1200
35
1356
1988
2950
40
1738
2265
3317
5100
40
3914
4403
5870
8806
13,152
40
6531
8595
11,640
17,190
26,054
10
95
10
8158
13,954
18,606
27,909
42,383
12
260
12
10,183
21,284
28,378
42,568
62,445
Valve Bore
Size (in.)
0-275
750
1000
1500
284
426
554
381
1040
637
Note: The torques listed above are based on valves controlling the
flow of clean ladings. These are maximum breakaway torques.
Running torques will generally average 1/3 of these values.
Reseating torques will average 3/4 of these values. For operating
temperatures between -20F and -50F, multiply these values by
1.20. Multiply torque values by 1.3 for elastomer face seals.
CONTACT
4 ft.
6 ft.
8 ft.
10 ft.
150
185
220
250
6" 6 & 9 C
220
300
370
450
8" 6 & 9 C
250
330
410
490
10" 6 & 9 C
255
340
430
520
12" 6 & 9 C
375
470
560
655
CONTENTS MENU
Valve Bore
Size (in.)
150
300
600
900
Valve Bore
Size (in.)
150
300
600
900
33
45
65
511
567
406
32
82
32
179
60
78
128
1380
1167
1043
43
175
43
528
105
145
200
2580
2235
1890
64
155
200
275
64
799
762
745
234
285
500
650
5450
5400
4525
4525
86
575
748
86
2150
2100
2085
2085
800
1010
8900
10 8
920
1162
10 8
3545
10
1270
1580
10
14,495
12 10
1460
1817
12 10
6063
12
1880
2450
12
22,500
14 12
2160
2818
14 12
9320
TECHNICAL DATA
www:
CONTACT
HELP
(p103)
Y N A
E A L
370E4 T
R U N N I O N
VA
A L L
W-K-M
LV E S
1/2
2 Regular Port
Wrench Head
Retainer Ring
Three-way
Wrench Head
Weather
Seal
Nut
Stop Pin
O-Ring
Stem Bearing
Cover Plate
Backup Ring
O-Ring
O-Ring
Backup Ring
Stem Thrust
Washer
CONTACT
Stem
C Spring
Fire-tested
Seal
Seat
O-Ring
CONTENTS MENU
Backup Ring
Trunnion
Bearing
Ground Spring
Stud
TECHNICAL DATA
Body
SD-11282
www:
Drain Fitting
CONTACT
HELP
Pressure Class
Size (in)
3
4
6
8
API 6D
2
3
4
6
API 6A
600
900
1500
2500
5000
(p104)
Y N A
E A L
370E4 T
R U N N I O N
VA
A L L
W-K-M
LV E S
Part
CS NACE
24
CS NACE
Low Temp
37
Body
A216 GrWCC
A352 GrLCC
A351 GrCF8M
Cover Plate
A105 CS
A352 GrLCC/4130-4140 AS
A182 GrF316 SS
Stop Plate
CS
Stem Bearing
CS/ TFE
SS/ TFE
CS/ TFE
SS/ TFE
Stop Pin
CS
A193 GrB7
A320 GrL7
A194 Gr2H
A194 Gr7L
Fittings
CONTACT
CS
SS
Wrench
Ductile Iron
Note: Trims 21, 23 and 24 are suitable for temperatures from -20F to
350F; trim 37 is suitable for temperatures from -50F to 350F.
CONTENTS MENU
Part
NH
NA
AA
Temperature Limits
-50F to 250F
-20F to 250F
-20F to 350F
Hydrin
Viton
Stem O-Ring
Hydrin
Viton
Seat O-Ring
Hydrin
Viton
Seat Insert
TECHNICAL DATA
N12
Viton
Nylon
Nylon
Weather Seal
Neoprene
Nylon
NA
NHF/NAF/AAF
Fire-Tested
www:
Internal Group Trim Number
CONTACT
Carbon Steel
21
Part
CS NACE
Low Temp
37
CS NACE
24
Ball
A105 CS ENC
Lower Trunnion
Stem
1018 - 1029 CS
Seat Retainer
1018 - 1029 CS
316 SS
Seat Insert
C Spring
B637 X750
Ground Spring
SS
HELP
(p105)
Y N A
E A L
370E4 T
R U N N I O N
VA
A L L
W-K-M
LV E S
Part
CS NACE
24
Carbon Steel
Low Temp. NACE
37
Body
A216 GrWCC
A352 GrLCC
A351 GrCF8M
Cover Plate
A105 CS
A352 GrLCC/4130-4140 AS
A182 GrF316 SS
Stop Plate
CS
Stem Bearing
CS/TFE
SS/TFE
CS/TFE
SS/TFE
Stop Pin
CS
A193 GrB7
A320 GrL7
A194 Gr2H
A194 Gr7L
Fittings
CONTACT
CS
SS
Wrench
Ductile Iron
Note: Trims 21, 23 and 24 are suitable for temperatures from -20F to
350F; trim 37 is suitable for temperatures from -50F to 350F.
CONTENTS MENU
TECHNICAL DATA
NHF/NAF
Fire-Tested
Part
NH
NA
Temperature Limits
-50F to 250F
-20F to 250F
Hydrin
Viton
Stem O-Ring
Hydrin
Viton
Seat O-Ring
Hydrin
Viton
Seat Insert
N12
Nylon
Nylon
Weather Seal
Neoprene
Nylon
NA
www:
Internal Group Trim Number
CONTACT
Carbon Steel
21
Part
Carbon Steel
Low Temp. NACE
37
CS NACE
24
Ball
Lower Trunnion
Stem
4130 - 4140 AS
Seat Retainer
1018 - 1029 CS
316 SS
Seat Insert
C Spring
B637 X750
Ground Spring
SS
HELP
(p106)
Y N A
E A L
370E4 T
R U N N I O N
VA
A L L
W-K-M
LV E S
Part
CS NACE
24
Body
A216 GrWCC
Cover Plate
Carbon Steel
Low Temp. NACE
37
A352 GrLCC
A351 GrCF8M
Stop Plate
CS
Stem Bearing
CS/ TFE
SS/ TFE
CS/ TFE
SS/ TFE
Stop Pin
CS
A193 GrB7
A320 GrL7
A194 Gr2H
A194 Gr7L
Fittings
CONTACT
CS
SS
Wrench
Ductile Iron
Note: Trims 21, 23 and 24 are suitable for temperatures from -20F to
350F; trim 37 is suitable for temperatures from -50F to 350F.
CONTENTS MENU
TECHNICAL DATA
NHF/NAF
Fire-Tested
Part
NH
NA
Temperature Limits
-50F to 250F
-20F to 250F
Hydrin
Viton
Stem O-Ring
Hydrin
Viton
Seat O-Ring
Hydrin
Viton
Seat Insert
N12
Nylon
Nylon
Weather Seal
Neoprene
Nylon
NA
www:
Internal Group Trim Number
CONTACT
Carbon Steel
21
Part
Carbon Steel
Low Temp. NACE
37
CS NACE
24
Ball
Lower Trunnion
Stem
4130 - 4140 AS
Seat Retainer
1018 - 1029 CS
316 SS
Seat Insert
C Spring
B637 X750
Ground Spring
SS
HELP
(p107)
Y N A
E A L
370E4 T
R U N N I O N
VA
A L L
W-K-M
LV E S
Part
Carbon Steel
Low Temp. NACE
37
CS NACE
24
Body
A487 Gr4
Cover Plate
Stop Plate
CS
Stem Bearing
CS / TFE
CS / TFE
Stop Pin
CS
A193 GrB7
A320 GrL7
A194 Gr2H
A194 Gr7L
Fittings
CONTACT
CS
SS
Wrench
Ductile Iron
Note: Trims 21, 23 and 24 are suitable for temperatures from -20F to
350F; trim 37 is suitable for temperatures from -50F to 350F.
CONTENTS MENU
TECHNICAL DATA
Part
NH
NA
NHF/NAF
Fire-Tested
Temperature Limits
-50F to 250F
-20F to 250F
Hydrin
Viton
Stem O-Ring
Hydrin
Viton
Seat O-Ring
Hydrin
Viton
Seat Insert
N12
Nylon
Nylon
Weather Seal
Neoprene
Nylon
NA
www:
Internal Group Trim Number
CONTACT
Carbon Steel
21
Part
Carbon Steel
Low Temp. NACE
37
CS NACE
24
Ball
Lower Trunnion
Stem
4130 - 4140 AS
Seat Retainer
1018 - 1029 CS
316 SS
Seat Insert
C Spring
B637 X750
Ground Spring
SS
HELP
(p108)
Y N A
370E4 T
E A L
R U N N I O N
VA
A L L
W-K-M
LV E S
Dimensions
G
Stem
Top
M=Stem Dial
R=Keyway
CONTACT
600 and 900 API 6D Pressure Classes
Dimension A
Valve
Size
(in)
RF
RJ
RF
RJ
111/2
14
14
17
17
22
22
26
115/8
141/8
141/8
171/8
171/8
221/8
221/8
261/8
141/2
15
15
18
18
24
24
29
145/8
151/8
151/8
181/8
181/8
241/8
241/8
291/8
CONTENTS MENU
4
6
8
2
3
4
6
600
900
2
2
3
3
4
4
6
6
31/8
31/8
41/4
41/4
51/16
51/16
63/4
63/4
55/16
55/16
639/64
639/64
715/32*
715/32*
14.0
14.0
25/8
25/8
25/8
25/8
25/8
25/8
45/8
45/8
12
12
12
12
12
12
20
20
43/8
43/8
43/8
43/8
43/8
43/8
45/8
45/8
63/16
63/16
63/16
63/16
63/16
63/16
10
10
*These dimensions are for the 4" class 600 valves only.
Dimensions for 4" and 6" x 4" class 900 valves are: E=81/8.
149/16
149/16
101/2
101/2
5/8
1711/16
1711/16
5/8
Note: Butt weld dimensions same as raised face flange end (RF).
TECHNICAL DATA
1500 API 6D Pressure Class; API 6A 5000 psi WP
Dimension A
www:
1500
5000
API 6D
API 6A
21/16
31/8 x 21/16
31/8
41/16 x 31/8
41/16
71/16 x 41/16
71/16 x 6
CONTACT
4
6
8
2
3
4
6
1500
RF
5000
RJ
39/16
39/16
49/16
49/16
61/8
61/8
91/4
91/4
57/8
57/8
71/4
71/4
111/4
111/4
155/8
155/8
25/8
25/8
25/8
25/8
25/8
25/8
45/8
45/8
12
12
12
12
12
12
20
20
43/8
43/8
43/8
43/8
43/8
43/8
61/2
61/2
63/16
63/16
63/16
63/16
63/16
63/16
10
10
15
15
121/2
121/2
RJ
141/2
145/8
181/2
185/8
181/2
185/8
211/2
215/8
211/2
215/8
273/4
28
273/4
28
323/4 331/8
21/16
21/16
31/8
31/8
31/8
41/16
41/16
41/16
6
6
6
8
5/8
5/8
17
17
Dimension A
2500
RF
RJ
17 3 / 4
22 3 / 4
22 3 / 4
26 1 / 2
26 1 / 2
36
2
32
3
43
4
64
HELP
17 5/8
23
23
26 7 / 8
26 7 / 8
36 1 / 2
C
13 / 4
13 / 4
21 / 2
21 / 2
21 / 2
31 / 2
31 / 2
31 / 2
57 / 32
4
4
53/8
53/8
69/16
69/16
89/32
89/32
111/16
111/16
129/16
129/16
25/8
25/8
43/8
43/8
43/8
43/8
12
12
18
18
18
18
43/8
43/8
65/8
65/8
65/8
65/8
63/16
63/16
1211/16
1211/16
1211/16
1211/16
(p109)
Y N A
E A L
370E4 T
R U N N I O N
VA
A L L
W-K-M
LV E S
Dimensions
M Stem Diameter
SF Stem Flat
W (SQ)
V
W
BB
Optional Actuator
Mounting Bracket for
Valve Sizes 2" - 6" x 4"
SD-11548-96
Actuator Mounting Bracket and Other Dimensions - 600 and 900 API 6D Pressure Classes
Valve
Size
(in)
CONTACT
BB
2
3
3
4
4
6
6
8
CONTENTS MENU
2
3
4
6
H
Handle
Dia.
Pipe Size
x Length
Keyway
SF
Y*
SCH 80 18"
1.110
.617 1.5
4 - 1/2"
SCH 80 18"
3/4 SCH 80 36"
3/4 SCH 80 36"
3/4 SCH 80 36"
3/4 SCH 80 36"
1.110
1.50
1.50
1.50
1.50
2.375
2.375
5/8 4
5/8 4
.617 1.5
.994 1.75
.994 1.75
.994 1.75
.994 1.75
4 - 1/2"
4 - 1/2"
4 - 1/2"
4 - 1/2"
4 - 1/2"
4 - 1/2"
4 - 1/2"
1/2
3.0
3.536 SQ
3.0
4.0
4.0
6.0
6.0
8
10
10
12
12
9 DIA
9 DIA
3.536 SQ
3.536 SQ
3.536 SQ
3.536 SQ
3.536 SQ
71/2 DIA
71/2 DIA
1
11/8
11/8
11/8
11/8
19/16
19/16
1/2
Valves 2" - 6" x 4" need pipe or round bar for handle.
*Y = Number and size of bolts for actuator mounting.
Actuator Mounting Bracket and Other Dimensions - 1500 and 2500 API 6D Pressure Classes, API 6A 5000 psi WP
TECHNICAL DATA
www:
Valve
Size
(in)
Class
BB
H
Handle
Dia.
Pipe Size
x Length
2 & 3 x2
2
3 & 4x3
3
4 & 6x4
4 & 6x4
6
(1500)
(2500)
(1500)
(2500)
(1500)
(2500)
(1500)
3.0
3.0
4.0
4.0
6.0
6.0
8
8
10
10
12
12
9 DIA
3.536 SQ
3.536 SQ
3.536 SQ
5.313 SQ
5.313 SQ
5.313 SQ
71/2 DIA
1
1
11/8
13/4
13/4
SCH 40 18"
SCH 80 18"
3/4 SCH 160 36"
11/4 SCH 160 36"
11/4 SCH 160 36"
1.110
.995
1.50
1.50
1.50
1.75
2.375
1/2
1/2
Valves 2" - 6" x 4" need pipe or round bar for handle.
*Y = Number and size of bolts for actuator mounting.
CONTACT
Keyway
SF
Y*
x 31/4
3/8 x 41/2
3/8 x 41/2
3/8 x 5
5/8 x 4
.617 1.66
.994 1.94
4 - 1/2"
4 - 1/2"
4 - 1/2"
4 - 5/8"
4 - 5/8"
4 - 5/8"
8- 1/2"
1/4
HELP
(p110)
Y N A
370E4 T
E A L
R U N N I O N
VA
A L L
W-K-M
LV E S
900
1500
5000
BW
FL
BW
FL
FL
FL
FL
2
3x2
3
4x3
4
6x4
6
8x6
50
70
82
90
171
173
390
415
64
84
128
174
255
333
550
645
55
85
90
100
150
170
190
225
100
126
163
283
314
456
707
836
118
198
256
342
450
563
800
1050
162
247
290
414
545
657
120
198
256
342
464
563
800
CONTACT
2500
Size
(in)
BW = Butt Weld
FL = Flanged
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
Valve Bore
Size (in)
0- 275
750
1000
1500
2250
3000
3750
5000
6250
2
3
4
6
284
381
637
1887
426
1040
1738
5146
554
1356
2265
6751
811
1988
3317
9961
1195
2935
4896
14776
1622
3883
6474
19591
2035
5145
8513
25115
2700
6830
11298
32850
3534
8996
15575
Size
(in)
600
900
1500
2500
5000
2
3x2
3
4x3
4
6x4
6
8x6
30
30
35
35
45
45
95
95
30
30
35
35
45
45
95
95
30
30
35
35
45
45
95
95
30
30
45
45
45
45
30
30
45
45
45
45
95
95
Valve
Size (in)
CV*
395
3x2
225
1045
4x3
610
1875
6x4
895
4525
8x6
2085
HELP
(p111)
D Y N A S E A L 3 1 0 C 2 - P I E C E F L O A T I N G B A L L V A L V E S
W-K-M
Key
CONTACT
Stop Plate
Bonnet Cap
CONTENTS MENU
Mounting Bracket
4 & 6 Bore Valves
Cap Screws
Compression
Ring
Mounting Bracket
8 Bore & Larger
Packing
Stem
Body
Stem Retainer
Pin
Stem Gasket
Pipe Plug
TECHNICAL DATA
www:
Ground
Spring
Seat Ring
Bleed
Fitting
Ball
Seat Ring
SD-24100
CONTACT
Tailpiece
Gasket
Tailpiece
HELP
(p112)
W-K-M
D Y N A S E A L 3 1 0 C 2 - P I E C E F L O A T I N G B A L L V A L V E S
CS
CS2*
S1
S8
Body
A216 Gr WCC
Studs
A193 Gr B7
A193 Gr B7 Plated
A193 Gr B8
Nuts
A194 Gr 2H
A194 Gr 2H Plated
A193 B8
A351 Gr CF8M
Carbon Steel
Stainless Steel
Tailpiece
Alloy Steel
Bonnet Cap
A351 Gr CF8M
Alloy Steel Plated
SS
A351 Gr CF8M
*CS2 and S8to be used for H2S service. Used with S1 internal trim only. Meets NACE MR-01-75.
CONTACT
01
Seat
01F
02
02F
TFE
Seat Shim
14
14F
18
Special
Filled
TFE
Filled TFE
TFE
TFE
28
TFE
28F
Filled TFE
60
316 S
with Stellite
hard facing
TFE
TFE
Stem Gasket
Filled TFE
Filled TFE
TFE
Filled TFE
Packing
TECHNICAL DATA
316 SS
Chromium Oxide
Coat
Braided
Graphite
Tailpiece Gasket
92H
CONTENTS MENU
Seat Seal
60A
CS
Ball
S1
316 SS
Ground Spring
www:
ML
B164 Class B Ni-Cu Alloy
304 SS
Stem
Compression Ring
303 SS
Carbon Steel
316 SS
Carbon Steel
316 SS
CONTACT
316 SS
Actuator Codes
Actuator Codes (Wrenches)
Part (Body)
Mounting Bracket
Carbon Steel
Wrench Head
Ductile Iron
Bolting
Carbon Steel
Wrench Handle
Carbon Steel
Set Screw
Carbon Steel
Carbon Steel
Stem Adapter
Carbon Steel
Cap Screw
Alloy Steel
Actuator
As Selected
Stop Plate
Carbon Steel
Handwheel
Carbon Steel
HELP
Part (Body)
(p113)
D Y N A S E A L 3 1 0 C 2 - P I E C E F L O A T I N G B A L L V A L V E S
W-K-M
CS
CS2*
S1
S8
Body
A216 Gr WCC
Studs
A193 Gr B7
A193 Gr B7 Plated
A194 Gr B8
Nuts
A194 Gr 2H
A194 Gr 2H Plated
A194 Gr B8
A351 Gr CF8M
Carbon Steel
Stainless Steel
Tailpiece
A216 Gr WCC
A193 Gr B7
A193 Gr B7 Plated
A193 Gr B8
A194 Gr 2H
A194 Gr 2H Plated
A194 Gr B8
Bonnet Cap
A351 Gr CF8M
A351 Gr CF8M
*CS2 and S8to be used for H2S service. Used with S1 internal trim only. Meets NACE MR-01-75.
CONTACT
01
Seat
02
02F
TFE
Seat Shim
CONTENTS MENU
01F
14
14F
18
Special
Filled
TFE
Filled TFE
TFE
TFE
28
TFE
Seat Seal
28F
Filled TFE
60
316 SS
with Stellite
hard facing
TFE
316 SS
Chromium Oxide
Coat
Braided
Graphite
TFE
Stem Gasket
92H
Tailpiece Gasket
60A
Filled TFE
Filled TFE
TFE
Filled TFE
Packing
TECHNICAL DATA
Part
CS
Ball
S1
316 SS
Ground Spring
www:
ML
B164 Class B Ni-Cu Alloy
304 SS
Stem
Compression Ring
316 SS
Carbon Steel
316 SS
Carbon Steel
316 SS
CONTACT
Actuator Codes
Part (Body)
Mounting Bracket
Ductile Iron
Adapter Plate
Carbon Steel
Stem Adapter
Carbon Steel
Bolting
Alloy Steel
Key
Carbon Steel
Set Screw
Carbon Steel
Actuator
As Selected
Handwheel
Carbon Steel
HELP
(p114)
D Y N A S E A L 3 1 0 C 2 - P I E C E F L O A T I N G B A L L V A L V E S
W-K-M
M= Stem Diameter
R= Key
F
E
S
E
E
CONTACT
Mounting Brackets
D
Y'
Y'
Front View
CONTENTS MENU
Front View
Y V
V Y
W
Z
TECHNICAL DATA
150 RF
300 RF
BW
www:
7.56 1.25
20
13
.25
12
10
9.44
1.5
20
13
.38
14
12
12.25 2.38
20
15
.62
20
17
7.75
18.5
15.12 2.94
20
15
.75
23
20
12.00
20.12
16.38 2.94
20
15
.75
24
12.00
20.12
16.38 2.94
20
11
19
.75
26
8.62
9.9
36
48
9.00
12.00
12.00 4.00
4.62
15.88 6.00
18.00
10
21.00
24.00
CONTACT
12
25.50
25.00
8.12 16.38
3.5
.56
4.62
1.88
2.44
3.5
.56
4.62
1.88
2.44
5.75
.69
8.25
3.5
7.75
5.75
.69
8.25
3.5
21
7.75
5.75
.69
8.25
3.5
24
7.75
5.75
.69
8.25
3.5
Z
62
Butt Weld.
150RF
300RF
229
305
305
102
117
219
251
915
192
32
508
65
289
270
224
89
14
119
48
394
267
403
403
152
162
289
321
915
240
38
508
79
289
10
329
279
89
14
119
48
62
200
457
502
419
419
203
206
416
318
60
508
117
340
16
471
381
197
146
17
209
89
76
250
533
568
457
559
610
648
635
254
249
470
384
75
508
117
340
19
530
448
197
146
17
209
89
76
305
356
511
416
75
508
117
340
19
567
479
197
146
17
209
89
76
305
356
511
416
75
508
252
352
19
648
557
197
146
17
209
89
76
150
100
300
HELP
Butt Weld.
(p115)
D Y N A S E A L 3 1 0 C 2 - P I E C E F L O A T I N G B A L L V A L V E S
W-K-M
M= Stem Diameter
R= Key
F
E
S
E
CONTACT
Front View
A
Mounting Brackets
CONTENTS MENU
Front View
Y'
Y'
Y V
V Y
X
Q
TECHNICAL DATA
Dimension A*
Size
150 RF
300 RF
BW
www:
CONTACT
10.50 15.88
18.00 11.50
10
21.00
22.38
12
24.00
25.50
14
9.9
30.00
36
7.56 1.25
20
13
.25
12
10
3.5
.56
48
9.44
1.5
20
13
.38
14
12
3.5
.56
12.5 2.38
20
15
.62
20
17
7.75
5.75
.69
8.25
3.5
15.12 2.94
20
15
.75
23
20
7.75
5.75
.69
8.25
3.5
27.00
12.00 14.00
12 20.12
16.38 2.94
20
15
.75
24
21
7.75
5.75
.69
8.25
3.5
12 20.12
16.38 2.94
20
11
19
.75
26
24
7.75
5.75
.69
8.25
3.5
Z
62
Butt Weld.
Size
150 RF
300 RF
HELP
150
267
403
200
457
292
250
533
568
300
610
648
350
403
419
686
762
102
152
117
219
915
192
32
32
508
65
289
270
224
89
14
119
48
152
203
162
289
321
915
240
38
508
79
289
10
329
279
89
14
119
48
62
559
203
254
206
416
318
60
508
117
340
16
471
381
197
146
17
209
89
76
635
254
305
249
470
384
75
508
117
340
19
530
448
197
146
17
209
89
76
305
356
305
511
416
75
508
117
340
19
567
479
197
146
17
209
89
76
305
356
305
511
416
75
508
252
352
19
648
557
197
146
17
209
89
76
762
Butt Weld.
(p116)
W-K-M
D Y N A S E A L 3 1 0 C 2 - P I E C E F L O A T I N G B A L L V A L V E S
(mm)
4
WGA
100
WGA
(kg)
113
144
94
51
65
43
150
162
144
273
189
73
65
124
86
125
193
139
57
88
63
6
WGA
150
WGA
176
158
239
203
80
72
108
92
133
190
154
60
86
70
200
388
437
328
176
198
149
217
197
293
237
98
89
133
108
8
WGA
200
WGA
428
477
368
194
216
167
231
211
307
251
105
96
139
114
10
WGA
250
WGA
695
858
610
315
389
277
451
587
365
205
266
166
12
WGA
300
WGA
943
1262
815
428
572
370
791
971
740
359
440
336
14
WGA
350
WGA
985
1350
1022
447
612
464
www:
2100
790
66
5300
86
2100
88
CONTACT
150 FL
300 FL
2500
820
6500 (S)
5400 (L)
2200 (S)
2200 (L)
2100
800
10 8
11000 (S)
10000 (L)
7400
25000
500
740
4
6
8
10
12
2090
4400
9000
15000
29300
3300
8200
14000
22000
37400
4200
11200
20300
30500
46400
19000 (S)
17000 (L)
6600 (S)
25000
17000
6600
26000
11000
Differential Pressure
Valve Bore
Size (in)
275
500
740
4
6
8
10
12
2400
5400
10000
16000
32000
3300
8200
15000
23000
39000
4200
11200
20300
30500
46500
*Cv values equal the flow of water in U.S. Gallons per minute per 1 PSI
pressure drop across a fully open valve.
(S) Short Pattern.
(L) Long Pattern.
Differential Pressure
275
2100
4200
12 10
12 12
14 12
Valve Bore
Size (in)
5300
11000
10 10
(kg)
BWE
44
64
(lbs)
TECHNICAL DATA
(lbs)
CONTACT
CONTENTS MENU
End Connection
HELP
the closed position for 24 to 48 hours and under the listed differential
pressures. The breakaway torque is an instantaneous value. As soon as
the ball has any movement, the torque will drop on the average to
two-thirds of this value.
(p117)
D Y N A S E A L 3 1 0 C 3 - P I E C E F L O A T I N G B A L L V A L V E S
W-K-M
CS
CS2*
Body
CS3*
ASTM A105
Body Plug**
S8
CS
SS
TE
AISI 4130
316 SS
AISI 1018
Tailpiece
FE
Bonnet Cap
Packing
Adjusting Screws
SS
Alloy Steel
Plated
18-8 SS
CONTACT
S1
18-8 SS
01
02
03
07
18
23
28
60A*
Seat
TFE
Filled
TFE
Acetal
Plastic
Viton
Special
Filled TFE
Celcon
Filled
TFE
Stellite
316 SS
Chromium Oxide
Coated
Braided
Graphite
Filled TFE
Rear Seal
CONTENTS MENU
Hydrin
O-Ring
Tailpiece Gasket
TFE
Stem Seal
Filled TFE
TFE
TFE
92H*
Filled TFE
Filled TFE
Packing
TECHNICAL DATA
www:
Part
CS
S1
S2
ML
Ball
AISI 1213 CS
Chrome Plate
316 SS
316 SS
B 164 Class B
Ni-Cu Alloy
Spring for
Grounding Device
Stem
AISI 1213 CS
Zinc Plated
Compression Ring
Carbon Steel
Zinc Plated
CONTACT
304 SS
316 SS
17-4PH
B164 Class B
Ni-Cu Alloy
18-8 SS
When specified.
Actuator Codes
Part (Body)
S8
Lock Nut
18-8 SS
Handle
Carbon Steel
Zinc Plated
316 SS
Handle Grip
Vinyl
Vinyl
HELP
(p118)
W-K-M
D Y N A S E A L 3 1 0 C 3 - P I E C E F L O A T I N G B A L L V A L V E S
CS2*
CS
Body
CS3*
S1
ASTM A105
Body Plug**
S8
CS
Tailpiece
SS
ASTM A105
4130
Nameplate
SS
Bonnet Cap
Packing
Adjusting Screws
Stainless Steel
18-8 SS
*CS2/CS3/S8 to
**When
CONTACT
Seat-Seal Material Codes
Part
01
02
03
07
18
23
28
60A
Seat
TFE
Filled
TFE
Acetal
Plastic
Viton
Special
Filled TFE
Celcon
Filled
TFE
Stellite
316 SS
Chromium Oxide
Coated
Braided
Graphite
Filled TFE
Rear Seal
CONTENTS MENU
Hydrin
O-Ring
Tailpiece Gasket
Stem Seal
TFE
Filled TFE
TFE
TFE
92H
Filled TFE
Filled TFE
Packing
TECHNICAL DATA
www:
Part
CS
S1
ML
Ball
CS Chrome Plate
316 SS
B164 Class B
Ni-Cu Alloy
Grounding
Device Spring
Stem
Compression
Ring
4140 CS
CONTACT
304 SS
B164 Class B
Ni-Cu Alloy
316 SS
303 SS
When specified.
Actuator Codes
Part (Body)
Wrench Handle
Ductile Iron
Alloy Steel
Carbon Steel
Stop Plate
HELP
(p119)
D Y N A S E A L 3 1 0 C 3 - P I E C E F L O A T I N G B A L L V A L V E S
W-K-M
B182
B172
B150
B103
Threaded
Flanged
Top View
Top View
Stem
Dimensions
Stem
Dimensions
CONTACT
Front View
Front View
CONTENTS MENU
B138 B110
TECHNICAL DATA
www:
B182
B172
SW
BW
B103 B150
Q**
H**
1/4
3.00
7.00
.38
.62
1.4
2.8
4.3
5/16 -24
.184
.31
.88
.55
8-32
3/8
3.00
.38
.62
1.4
2.8
4.3
5/16 -24
.184
.31
.88
.55
8-32
1/2
4.00
.50
.75
1.8
3.5
5.4
7/16 -20
.246
.44
.72
10-24
3/4
4.25
8.25
.75
1.9
3.6
5.4
7/16 -20
.246
.44
.75
10-24
4.50
5.00
6.50
8.50
8.50
1.25
2.8
4.1
7.0
5/8 -18
.356
1/4 -20
11/2
5.25
6.50
7.50
9.50
9.50
9.25
1.5
1.75
3.6
5.0
9.5
3/4 -16
.430
.78
1.34
5/16 -18
6.25
7.00
8.50
11.50 11.62
8.50
2.5
5.0
5.4 15.0
1.12 .692
3/8 -16
10.00 8.00
11.12
11.12
3.5
6.4
6.6 15.0
1.5
2.32
1/2 -13
CONTACT
Dimension A
SW
BW
B138 B110
Q**
H**
76
178
10
16
35
70
108
5/16 -24
22
14
8-32
10
76
10
16
35
70
108
5/16 -24
22
14
8-32
15
102
13
19
44
89
146
7/16 -20
10
25
18
10 -24
20
108
210
19
25
49
92
146
7/16 -20
10
25
19
10 -24
25
114
127
165
216
216
25
32
71
103 178
5/8 -18
18
32
29
1/4 -20
40
133
165
190
241
241
235
38
44
90
127 241
3/4 -16
11
21
38
34
5/16 -18
50
159
178
216
292
295
216
51
64
127
137 381
28
18
21
67
48
3/8 -16
80
254
203
283
282
76
89
164
167 381
28
18
32
76
59
1/2 -13
HELP
(p120)
W-K-M
D Y N A S E A L 3 1 0 C 3 - P I E C E F L O A T I N G B A L L V A L V E S
B114
B170
B142
B106
Threaded
Top View
Flanged
Top View
Stem
Dimensions
Stem
Dimensions
CONTACT
Front View
Front View
CONTENTS MENU
Dimension A
Size THD 150 RF 300 RF 600 RF 600 RJ
B136 B100
TECHNICAL DATA
www:
BW
Q**
H**
1/2
3.88
7.88
.38
.5
.62 1.4
2.8
4.3
5/16 -24
.184 .31
.88
.55
8-32
3/4
4.38
.5
.75
.75 1.8
3.5
5.8
7/16 -20
.246 .44
.72
10-24
4.25
5.00
6.50
8.50
8.50
8.25
.75
1.9
3.6
5.8
7/16 -20
.246 .44
.75
10-24
11/2
6.50
7.50
9.50
9.50
1.5
1.5 3.0
4.3
7.0
5/8 -18
6.25
7.00
8.50
1.5
1.75 3.6
5.0
7.5
3/4 -16
.430 .78
21/2
8.50
7.50
9.50
2.5
2.5 5.0
5.4 15.0
3/8 -16
32
8.00
11.12
14.00 14.12
2.5 5.0
5.4 15.0
3/8 -16
12.00 9.00
12.00
17.00 17.12
12.00
3.5 6.4
6.6 15.0
1/2 -13
1/4 -20
2.31
CONTACT
Dimension A
Size
SW
BW
Q**
H**
15
98
200
13
16
35
70
108
5/16 -24
22
14
8-32
20
111
13
19
19
44
89
146
7/16 -20
11
25
18
10-24
25
108
127
165
216
216
210
19
25
25
49
92
146
7/16 -20
11
25
19
10-24
40
133
165
190
241
241
32
38
38
76
108 178
5/8 -18
18
32
29
1/4 -20
50
159
178
216
292
295
260
38
51
44
90
127 190
3/4 -16
10
20
38
34
5/16 -18
65
216
190
241
51
64
64
28
17
21
67
48
3/8 -16
8050
203
282
356
359
51
76
64
28
17
21
67
48
3/8 -16
100
305
229
305
432
435
305
76
102
89
28
17
32
76
59
1/2 -13
HELP
(p121)
D Y N A S E A L 3 1 0 C 3 - P I E C E F L O A T I N G B A L L V A L V E S
1/4"
W-K-M
Valve Size
(in)
End
Connection
Full Bore
1/4
THD
1.5
3/8
THD
1/2
THD
3/4
THD
THD
150 Flg
300 Flg
SW
11/2
Valve Size
(mm)
End
Connection
Full Bore
THD
.68
1.5
10
THD
.68
1.5
1.5
15
THD
.68
.68
3.25
20
THD
1.47
.91
5
8.5
12
16
3
6.5
10
14
25
THD
20PN Flg
50PN Flg
100PN Flg
2.27
3.86
5.44
7.26
1.36
2.95
4.54
6.35
THD
150 Flg
300 Flg
600 Flg
12
17
24
32
8
15
20
26
40
THD
20PN Flg
50PN Flg
100PN Flg
5.44
7.71
10.9
14.5
3.63
6.80
9.07
11.8
THD
150 Flg
300 Flg
600 Flg
BW
23
33
38
47
30
12.5
23
25
33
50
THD
150PN Flg
300PN Flg
600PN Flg
BW
10.4
15.0
17.2
21.3
13.6
5.67
10.4
11.3
15.0
21/2
THD
150 Flg
300 Flg
BW
29
41
48
36
65
THD
20PN Flg
50PN Flg
BW
13.2
18.6
21.8
16.3
THD
150 Flg
300 Flg
600 Flg
BW
56
64
81
87
67
51
76
81
61
75
THD
20PN Flg
50PN Flg
100PN Flg
BW
25.4
29.0
36.7
39.5
30.4
23.1
35.0
36.7
27.7
THD
150 Flg
300 Flg
600 Flg
BW
67
80
127
130
85
100
THD
20PN Flg
50PN Flg
100PN Flg
BW
30.4
36.3
57.6
59.0
38.6
CONTACT
CONTENTS MENU
TECHNICAL DATA
Regular Port
Weight
Regular Port
Weight
www:
End Connection
Threaded
BWE
150FL
300FL
600FL
1 /4
3/8 3/8
1 /2 3/8
1 /2 1 /2
3/4 1 /2
3/4 3/4
1 3/4
11
11 /2 1
11 /2 11 /2
2 11 /2
22
21 /2 2
32
33
43
9.1
9.1
5.6
16.6
10.3
46.1
28.0
94.7
53.4
251
122
486
249
1101
417
244
1231
518
11
16
28
25.1
89.8
55.5
226
132
459
252
1044
542
23.8
78.8
52.6
89.8
94.3
210
127
417
242
1044
550
22.5
68.9
187
119
358
189
1045
610
1 /4
CONTACT
HELP
(p122)
D Y N A S E A L 3 1 0 C & 3 1 0 D 3 - P I E C E F L O A T I N G B A L L V A L V E S
Valve Bore
Size (in)
275
1 /4
500
36
36
60
90
120
240
500
1010
3/8
1 /2
3/4
1
11 /2
2
3
36
36
60
90
150
330
640
1800
Valve
Bore
Size (in) 275
1/4
1 /4
36
36
60
90
180
420
810
2400
3/8
1 /2
3/4
11 /2
2
3
1/ 2
3/4
1
11/ 2
2
3
CONTENTS MENU
500
50
50
60
108
264
528
980
1920
50
50
60
125
290
610
1110
2200
50
50
72
140
320
726
1300
2510
50
50
100
190
380
895
1520
3110
60
60
120
260
440
1070
1750
3700
275
500
740
1000
1500
2250
60
60
60
128
520
910
1200
60
60
60
128
580
1042
1800
60
60
60
145
680
1240
2400
60
60
70
160
810
1500
2900
72
72
84
215
980
1765
3420
84
84
108
360
1390
2300
Differential Pressure
50
50
60
108
264
480
900
1650
3/8
Differential Pressure
Valve Bore
Size (in)
740
CONTACT
W-K-M
75
75
140
340
510
1270
2000
4000
85
85
180
420
620
1510
Full
Bore
Regular
Bore
1/4
100
100
220
500
Liquid 275
PSI
Dry Gas
275 PSI
Dry Gas
740 PSI
36
60
90
180
420
900
2400
42
82
150
336
840
1200
3600
113
220
404
606
2260
3230
9690
1/2
F
F
3/4 F
1F
11/2 F
2F
3F
R
R
1R
2R
21/2 R
4R
1/2
3/4
Valve Bore
Size (in)
1/4
TECHNICAL DATA
3/8
1/ 2
3/4
1
2
www:
275
500
740
1000
1500
2000
2250
2500
3000
3500
3750
4000
4500
500
60
60
70
108
264
900
60
60
70
108
264
980
60
60
70
125
290
1100
60
60
82
140
320
1300
60
65
110
190
380
1520
65
70
125
260
440
1750
70
75
140
340
510
2000
85
85
180
420
620
2550
100
100
220
560
760
2550
115
125
276
695
125
130
150
165
CONTACT
Note: The torques listed are based on valves controlling the flow of
clean liquid at ambient temperature. For torques at pressure less than
275 psi use the value for 275 psi. For any pressure above 275 but less
than the maximum pressure listed, interpolation may be used. These
torques are average breakaway torques for valves that have been in
HELP
(p123)
Y N A
310 F
E A L
L O AT I N G
VA
A L L
W-K-M
LV E S
DynaSeal 310 Ball Valves comply with the following design and
testing standards: ANSI B16.5 (Steel Pipe Flanges and Flange
Fittings), MSS-SP-6 (Standard Finishes for Pipe Flanges),
MSS-SP-25 (Standard Marking System for Valves), MSS-SP-55
(Quality Standard for Steel Castings), API 607 (Fire Test
Specification, Third Edition).
In addition, DynaSeal 310 Ball Valves can be supplied
to comply with these standards: MSS-SP-72 (Ball Valves for
How to Order
2
Size
Inches
Port
Reg=R
Full=F
Body
Tailpiece
Code
Valve
Type
BallStem
Code
Seal
Code
Actuator
Code
CONTACT
See Next Page
Material
Codes
Material
Code
CS
Carbon Steel
CS
CS2*
S1
Ni-Cu Alloy
ML
CS3*
17-4PH
S2*
Carbon Steel
CONTENTS MENU
S1
S8
Actuator Code
TECHNICAL DATA
www:
CONTACT
Seal
Code
Seal Material
Tailpiece Gasket
Material
01
TFE
TFE
01F
TFE
TFE
TFE
02
Filled TFE
02F
Filled TFE
TFE
03
Delrin/HydrinTM
TFE
07
VitonTM
TFE
14
Filled TFE
TFE
14F
Filled TFE
TFE
18
HPT-2
Filled TFE
23
CelconTM
TFE
60
StelliteTM
Filled TFE
60A
StelliteTM
Filled TFE
92H
Filled TFE
Wrench
WR
Oval Handwheel
OH
Worm Gear
WGA
Bare Stem
BS
Less Gear
L/G
HELP
(p124)
Y N A
E A L
310 F
L O AT I N G
VA
A L L
W-K-M
LV E S
Size (in)
CONTACT
300RF
SP
LP
SP
4F
B110
B128
B150
6R
B102
B120
B142
6F
B110
B113
B128
B150
8R
B100
B102
B122
B142
8F
B110
B128
B134
B150
10 R
B100
B120
B142
10 F
B110
B128
B134
B150
12 R
B100
B120
B142
12 F
B110
B128
B150
14 R
B100
B120
B142
150RF
300RF
600RF
600RJ
1R
B100
B120
B114
B170
1F
B110
B128
B182
B172
CONTENTS MENU
11/2 R
B100
B114
B170
11/2 F
B110
B128
B182
B172
www:
2R
B100
B120
B114
B170
2F
B110
B128
B182
B172
3x2
B100
B120
B114
B170
3F
B110
B128
B182
B172
4x3
B100
B120
B114
B170
TECHNICAL DATA
Size (in)
150RF
300RF
*1/2 F
B112
B130
*3/4 R
B102
B122
*1 R
B102
B122
*1 F
B112
B130
*11/2 R
B102
B122
11/2 F
B112
B130
*2 R
B102
B122
2F
B112
B130
*3 R
B102
B122
3F
B112
B130
*4 R
B102
B122
HELP
Female
Thread
Male
Thread
Socket
Weld
Butt
Weld
B138
B138
B103
/8 F
B138
/2 R
Size (in)
/4 F
CONTACT
300BW
LP
B136
B136
B106
/2 F
B138
/4 R
B136
/4 F
B138
B138
B103
1R
B136
B136
B106
1F
B138
11/2 F
B138
B103
2R
B136
B106
2F
B138
B150
3F
B138
B150
4R
B136
B142
Note: Threaded end valves have NPT internal pipe threads in full conformance with ANSI B2.1 and Federal Thread Handbook H-28.
*Unibody Design.
Note: R - Regular Port, F - Full Port, SP - Short Pattern, LP - Long Pattern
(p125)
Y N A
E A L
310 F
L O AT I N G
VA
A L L
LV E S
W-K-M
Seat
Material
Tailpiece
Gasket
01
TFE
TFE
Seat and tailpiece gaskets are of virgin TFE. Use where lading contamination from
glass or other fillers is not desirable, such as in food service. Recommended for low
temperature service to -50F. Also recommended for vacuum service.
01F
TFE
TFE
Fire tested trim for 2-piece design valves. Same seat materials as 01 trim, but with
special fire tested seat. 4" and larger bore size.
02
Filled TFE
TFE
Seat material is TFE filled with inert materials for use at elevated temperatures and
pressures. Same chemical resistance as Virgin TFE except slightly affected by hot
concentrated alkaline solutions. Some chlorinated compounds can cause swelling.
Also recommended for low temperature service -50F. Good for vacuum service.
Fire tested seals for 3-piece valves.
02F
Filled TFE
TFE
Fire tested trim for 2-piece design valves. Same seat material 02 but with special fire
tested seat. 4" and larger bore size.
03
Delrin Hydrin
TFE
07
Viton/SS
TFE
High and low pressure block and bleed. General use for low pressure & abrasion
resistance. Not suitable for steam. Good for vacuum service.
14
Filled TFE
TFE
Same as 02, except for 6" and larger valves for temperatures above 250F.
14F
Filled TFE
TFE
Fire tested trim for 2-piece design valves. Same seat material as 14, but with fire
tested seat. 4" and larger bore size.
18
HPT-2
Filled TFE
23
Celcon
TFE
28
Filled TFE
Filled TFE
60
Stellite
Filled TFE
Special Stellite seats for digester blowdown service, spent liquor and steam applications common to the pulp/paper industry. Leakage Class V.
60A
Stellite
Filled TFE
Special Stellite seats for use when hard faced metal seats are required for applications
outside the pulp and paper industry.
92H
316 SS with
Chrome Oxide
and Filled TFE
Filled TFE
Service Application
CONTACT
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
HPT-2 is a special TFE formulation for use at temperatures above 02 capability. Best suited for constant temperature or constant pressure applications. Proven service in steam,
hot oil, heat-transfer fluids, hot resins, boiler feed water. Same chemical
resistance as TFE. Slightly affected by hot, concentrated alkaline solutions. Some
fluorinated compounds cause swelling.
For use in high pressure applications. Temperature limited to 225F.
Note: Trim 07 and 18 should be tested for each application by actual use.
HELP
(p126)
Y N A
E A L
310 F
L O AT I N G
VA
A L L
W-K-M
LV E S
Temp F
1/4 3/4
111/2
3 4
6 12
1500
1500
1400
1100
600
100
1000
1000
900
650
375
100
750
750
700
500
300
100
600
600
550
425
250
100
285
285
150
50
-50 to 100
200
250
300
350
400
CONTENTS MENU
-50 to 100
200
250
300
350
400
450
500
11/2
2250
2000
1775
1500
1225
950
700
450
Temp F
6 12
2250
1350
1150
975
800
640
475
300
1500
1300
1150
950
800
600
400
200
740
740
740
740
590
450
325
200
740
740
675
-50 to 100
150
200
250
300
350
400
450
500
550
600
625
Seal Code 03
TECHNICAL DATA
Temp F
-50 to 100
150
180
www:
1/4 3/4
1 11/2
3000
2250
1550
2500
2250
1550
2300
2250
1550
1440
1240
600
Temp F
-50 to 100
150
200
225
1/4 11/2
740*
500
250
-0-
500*
350
190
-0-
285*
200
100
-0-
-20 to 300
350
400
450
HELP
3 4
6 12
+
+
+
1775
1650
1575
1500
1300
1075
850
350
100
+
+
+
1250
1175
1075
1000
875
725
600
100
-0-
+
+
+
+
740
700
650
600
550
500
75
-0-
+
+
+
+
600
500
400
300
200
100
-0-0-
1/2 3/4
1 2
5000
5000
3250
2500
3750
3000
2000
1500
3000
2200
1440
1000
Seal Code 23
Temp F
Trims 02, 02F, 03, 14, and 14F are preferred for temperature ranges
indicated by +.
Seal Code 07
CONTACT
740
675
550
410
300
175
65
Seal Code 18
6 12
-50 to 225
250
300
350
400
450
500
CONTACT
Temp F
Temp F
Temp F
Trim 60
Trim 92H
-50 to 100
150
200
250
300
350
400
450
500
550
600
740
707
675
665
655
645
635
617
600
575
550
740
710
680
675
650
575
475
375
275
200
100
(p127)
Y N A
E A L
310C F
L O AT I N G
A L L
VA
W-K-M
LV E S
Temp F
CONTACT
Temp C
S1 & S8
Valve Class
150
300
600
150
300
600
Valve Class
-20 to 100
150
200
250
300
350
400
450
500
550
600
285
272
260
245
230
215
200
185
170
155
140
740
707
675
665
655
645
635
617
600
575
550
1480
1415
1350
1332
1315
1292
1270
1235
1200
1147
1095
275
257
240
227
215
205
195
182
170
155
140
720
670
620
590
560
537
515
497
480
465
450
1440
1340
1240
1180
1120
1075
1030
992
955
930
905
-29 to 38
66
93
121
149
177
204
232
260
288
316
S1 & S8
51
49
47
46
45
44
44
43
41
40
38
102
98
93
92
91
89
88
85
83
79
75
19
18
17
16
15
14
13
13
12
11
10
50
46
43
41
39
37
36
34
33
32
31
100
92
86
81
77
74
71
68
66
64
62
Threaded Valves
Body trim code S8 and CS3 are suitable for service to -50F. All
other trims are limited to operating temperatures no lower than
Temp F
Valve Bore
Size (in)
1/4
-20 to 100
150
200
250
300
350
400
450
500
550
600
TECHNICAL DATA
www:
CONTACT
3/8
1/2
5000
5000
4550
4490
4430
4350
4275
4155
4040
3865
3690
3/4
3750
3000
2730
2690
2650
2605
2560
2490
2425
2315
2210
S1 & S8
1 2
3 4
3000
2300
2025
1997
1970
1935
1900
1847
1795
1717
1640
740
707
675
665
655
645
635
617
600
575
550
1/4
3/8
5000
5000
4300
4090
3880
3720
3560
3435
3310
3220
3130
1/2
3/4
3750
3000
2575
2450
2325
2330
2140
2065
1990
1930
1875
1 2
3 4
3000
2300
1860
1770
1680
1610
1540
1487
1435
1395
1355
720
670
620
590
560
537
515
497
480
465
450
Temp C
HELP
S1 & S8
Valve Bore
Size (mm)
6 10
15 20
25 50
76 100
-29 to 38
66
93
121
149
177
204
232
260
288
316
345
345
314
310
306
300
295
287
279
267
254
259
207
188
186
183
180
177
172
167
160
152
207
159
140
138
136
133
131
127
124
118
113
51
49
47
46
45
44
44
43
41
40
38
6 10
15 20
25 50
345
345
297
282
268
257
246
237
228
222
216
259
258
178
169
160
154
148
142
137
133
129
207
159
128
122
116
111
106
103
99
96
93
76 100
50
46
43
41
39
37
36
34
33
32
31
(p128)
D Y N A S E A L 3 1 0 C 3 - P I E C E F L O A T I N G B A L L V A L V E S
Handle
11/2 "
1/2 "
W-K-M
Full Bore
Lock Nut
Bonnet Cap
Packing
Compression Ring
Stem
CONTACT
Body
Seat Ring
Tailpiece
CONTENTS MENU
Tailpiece
Gasket
Lever
TECHNICAL DATA
Tailpiece
Ball
Seat Ring
SD-24096
Tailpiece
Gasket
Stop Plate
Retainer Ring
Locking Plate
www:
Stem Seal
CONTACT
Bonnet Cap
Packing Ring
Stem
Body
Seat Ring
Seat Ring
Tailpiece
Gasket
Tailpiece
Ball
Tailpiece
Gasket
SD-24095
Tailpiece
HELP
(p129)
Y N A
E A L
310D
L O A T I N G
A L L
W-K-M
A L V E S
Packing
Bonnet Cap
Compression Ring
Seat Ring
CONTACT
Tailpiece Gasket
Body
Ball
SD-24099
Seat Ring
Stem Gasket
Stem
Seat Retainer
CONTENTS MENU
TECHNICAL DATA
Retainer Ring
Lever
www:
Cap Screws
Stop Plate
CONTACT
Compression
Ring
Stem Seal
Bonnet Cap
Packing
Stem
Tailpiece Gasket
Seat Ring
Ball
Seat Ring
HELP
Body
SD-24098
Tailpiece
(p130)
Y N A
310D
E A L
L O A T I N G
A L L
W-K-M
A L V E S
CS2*
CS
S8
Body
Body Plug
ASTM A105
316 SS
Tailpiece
2 Piece
Seat
Retainer
Unibody
AISI 1018
316 SS
Bonnet Cap
Packing Adjusting
Screws
316 SS
18-8 SS
CONTACT
S1
18-8 SS
01
02
07
18
60A*
92H*
Seat
TFE
Filled TFE
Viton
Special
Filled TFE
Stellite
316 SS
Chromium Oxide
Coated
Braided
Graphite
Filled TFE
CONTENTS MENU
Rear Seal
Tailpiece Gasket
TFE
Stem Seal
Filled TFE
TFE
Filled TFE
TFE**
Packing
Graphite Packing
**3/4"and smaller Graphite Packing.
*1"F and larger (60A supplied with 316SS ball, 92H supplied with
Chromium Oxide Coated 316SS Ball).
TECHNICAL DATA
CS
S1
ML
S2
Ball
AISI 1213
Hard Chrome Plate
316 SS*
B164 Class B
Ni-Cu Alloy
316 SS
Spring for
Grounding Device
Stem
AISI 1213
Zinc Plated
Compression Ring
Carbon Steel
Zinc Plated
www:
CONTACT
304 SS
B164 Class B
Ni-Cu Alloy
316 SS
17-4 PH
18-8 SS
When specified.
*Chromium Oxide Coated when seat-seal code 92H specified.
Actuator Codes
HELP
Part (Body)
CS, CS2, S1
S8
Lock Nut
18-8 SS
Handle
Carbon Steel
Zinc Plated
316 SS**
Handle Grip
Vinyl
Vinyl
(p131)
Y N A
310D
E A L
L O A T I N G
A L L
W-K-M
A L V E S
Regular Port
Top View
Top View
Stem
Dimensions
Stem
Dimensions
Front View
Front View
CONTACT
CONTENTS MENU
1/2
3/4
1R
1F
11/2 R
2R
TECHNICAL DATA
3R
4R
B102
B122
B112
B130
4.62
5.00
6.50
7.00
8.00
9.00
6.00
6.50
7.50
8.50
11.12
12.00
4.25
5.00
5.50
6.50
Q**
H**
.50
.50
.50
.50
.75
.75
1.00
1.00
1.00
1.00
1.50
1.50
2.00
2.00
3.00
3.00
.50
.50
.75
.75
1.00
1.00
1.00
1.00
1.50
1.50
2.00
2.00
3.00
3.00
4.00
4.00
1.75
1.38
1.94
2.31
2.13
2.44
2.13
2.44
2.50
3.06
3.00
3.25
3.75
4.13
4.50
5.00
1.8
1.8
1.8
1.8
2.3
2.3
2.8
2.8
2.8
2.8
3.6
3.6
5.0
5.0
6.4
6.4
3.5
3.5
3.5
3.5
4.0
4.0
4.3
4.3
4.3
4.3
5.3
5.3
5.4
5.4
6.6
6.6
5.8
5.8
5.8
5.8
6.7
6.7
7.8
7.8
7.8
7.8
8.5
8.5
15.0
15.0
15.0
15.0
7/16 -20
1.12
1.12
1.12
1.12
.246
.246
.246
.246
.246
.246
.356
.356
.356
.356
.430
.430
.692
.692
.692
.692
.41
.41
.41
.41
.48
.48
.58
.58
.58
.58
.64
.64
.81
.81
1.21
1.21
1.00
1.00
1.00
1.00
1.00
1.00
1.25
1.25
1.25
1.25
1.50
1.50
2.66
2.66
3.00
3.00
.72
.72
.72
.72
.84
.84
1.02
1.02
1.02
1.02
1.21
1.21
1.88
1.88
2.32
2.32
10-24 .38 DP
10-24 .38 DP
10-24 .31 DP
10-24 .31 DP
10-24 .25 DP
10-24 .25 DP
1/4 -20 Thru
1/4 -20 Thru
1/4 -20 Thru
1/4 -20 Thru
5/16 -18 Thru
5/16 -18 Thru
.44 Thru
.44 Thru
.56 Thru
.56 Thru
7/16 -20
7/16 -20
7/16 -20
7/16 -20
7/16 -20
5/8 -18
5/8 -18
5/8 -18
5/8 -18
3/4 -16
3/4 -16
www:
Dimension A
CONTACT
13 F
19 R
25 R
25 F
48 R
51 R
76 R
HELP
102 R
B102
B122
B112
B130
117
127
165
180
203
229
152
165
191
216
282
305
108
127
140
165
Q**
H**
13
13
13
13
19
19
13
13
25
25
38
38
51
51
76
76
13
13
19
19
25
25
13
13
38
38
51
51
76
76
102
102
44
44
49
49
54
54
54
54
64
64
76
76
95
95
114
114
46
46
46
46
58
58
72
72
71
71
91
91
127
127
163
163
89
89
89
89
102
102
109
109
109
109
135
135
137
137
168
168
147
147
147
147
170
170
198
198
198
198
216
216
381
381
381
381
7/16 -20
28
28
28
28
6
6
6
6
6
6
9
9
9
9
11
11
18
18
18
18
10
10
10
10
12
12
15
15
15
15
16
16
21
21
21
21
25
25
25
25
25
25
32
32
32
32
38
38
68
68
76
76
18
18
18
18
21
21
26
26
26
26
31
31
48
48
59
59
10-24 .38 DP
10-24 .38 DP
10-24 .31 DP
10-24 .31 DP
10-24 .25 DP
10-24 .25 DP
1/4 -20 Thru
1/4 -20 Thru
1/4 -20 Thru
1/4 -20 Thru
5/16 -18 Thru
5/16 -18 Thru
.44 Thru
.44 Thru
.56 Thru
.56 Thru
7/16 -20
7/16 -20
7/16 -20
7/16 -20
7/16 -20
5/8 -18
5/8 -18
5/8 -18
5/8 -18
3/4 -16
3/4 -16
(p132)
Y N A
E A L
310D
L O A T I N G
A L L
W-K-M
A L V E S
1 /2 F
Full Bore
Top View
1
2 /3 F
Stem Dimensions
Front View
CONTACT
11/2 F
CONTENTS MENU
2F
3F
B130
6.50
7.00
8.00
7.50
8.50
11.12
Q**
H**
1.50
1.50
2.00
2.00
3.00
3.00
2.50
3.06
3.00
3.25
3.75
4.13
3.6
3.6
5.0
5.0
6.4
6.4
5.3
5.3
5.4
5.4
6.6
6.6
8.5
8.5
15.0
15.0
15.0
15.0
3/4 -16
1.12
1.12
1.12
1.12
.430
.430
.692
.692
.692
.692
.64
.64
.81
.81
1.25
1.25
1.50
1.50
2.66
2.66
3.00
3.00
1.21
1.21
1.88
1.88
2.32
2.32
5/16 -18
H**
3/4 -16
5/16 -18
1/2-13
1/2-13
1/2-13
1/2-13
2 holes open, 2 holes used for bonnet cap - see diagram top of page.
TECHNICAL DATA
38 F
www:
51 F
76 F
CONTACT
B130
165
165
203
191
216
282
Q**
38
38
51
51
76
76
64
64
76
76
95
95
91
91
127
127
163
163
135
135
137
137
168
168
216
216
381
381
381
381
3/4 -16
28
28
28
28
11
11
18
18
18
18
16
16
21
21
40
40
38
38
68
68
76
76
31
31
48
48
59
59
3/4 -16
5/16 -18
Thru
Thru
1/2-13
1/2-13
1/2-13
1/2-13
5/16 -18
End Connection
150FL
300FL
1 /2
1 3/4
11
11 /2 1
11 /2 11 /2
2 11 /2
22
32
33
43
16.6
23.8
25.1
89.8
53.4
226
132
469
189
1040
542
16.6
23.8
25.1
89.8
53.4
180
127
417
189
1040
550
1 /2
1 /2
3/4
HELP
Valve
Size
Pounds
1/2
F
1R
1F
11/2 R
11/2 F
2R
2F
32
3F
4R
Kilograms
150CL
300CL
150CL
300CL
3.8
6.3
8.5
12
17
19
35
39
64
64
5.0
8.8
12
18
24
24
45
51
86
94
1.7
2.9
3.9
5.4
7.7
8.6
16
18
29
29
2.3
4.0
5.4
8.2
11
11
20
23
39
43
(p133)
Y N A
E A L
210A
L O A T I N G
A L L
W-K-M
A L V E S
(2"R-B236 shown)
Lock Nut
Handle (optional)
Stem O-Rings
Locking Plate
Stem
Seal
Stem
CONTACT
Ball
Seat Ring
SD-24092
Grease Fitting
(optional)
Body
CONTENTS MENU
Tailpiece
Tailpiece
Gasket
Seat Ring
How to Order
TECHNICAL DATA
DI
Size
Inches
Port
Reg=R
Full=F
Valve
Type
Pressure
Rating
Body
Tailpiece
Code
Seat
Code
Seal
Code
BallStem
Code
Grease
Fitting
Code
Actuator
Code
Ductile Iron
www:
F=with
N=without
Size (in)
Female Thread
Material
Code
1F
B238
1000*
Carbon Steel
CS
2R
B236
1500
Stainless Steel
SS
2F
B238
2000*
3R
B236
3 F*
B238
CONTACT
4 R*
Material
Code
Filled TFE
02
Delrin/Buna O-Ring
03
B236
HELP
Description
Code
BS
Handle
HL
BSP
HLP
Material
Code
Buna
Viton
(p134)
Y N A
210A
E A L
L O A T I N G
A L L
W-K-M
A L V E S
Standard Materials
Part
Material
Body/Tailpiece
Grease Fitting
Carbon Steel
(CS) AISI 1213 Carbon Steel, Hard Chrome Plated
Ball
(SS) 316 SS
(CS) AISI 1213 Carbon Steel, Zinc Plated
Stem
Seat
Tailpiece Gasket
PTFE
Stem Seal
Filled TFE
(B) Buna N
Stem O-Ring
(V) Viton
Handle
Handle
11/2" and 1" Bore Carbon Steel, Zinc Plated w/ Vinyl Grip
Lock Nut
CONTACT
*For H2S service use Trim Code DI-02-V-SS. Meets NACE MR-01-75.
Pressure/Temperature Limits
Seat Seal Codes 02
Temp F
3/4 11/2
50 100
200
250
300
350
CONTENTS MENU
2250
2000
1775
1500
1225
Temp F
3
1500
1350
1150
975
800
3/4 11/2
-20 100
180
2500
1550
2
2500
1550
3
1500
1375
Weights
Regular Port (B236)
TECHNICAL DATA
Operation
2 x 11/2
3x2
4x3
9.4
9.9
16.6
19.8
35.5
38.7
www:
Operation
w/o handle (lbs)
with handle (lbs)
2x2
3x3
4.0
4.5
14.4
17.6
42.8
46.0
CONTACT
Front View
Side View
Front View
Side View
Size
1F
2R
2F
3R
3F
4R
HELP
B236
B238
5.55
7.25
8.75
4.00
6.00
8.75
1.00
1.50
2.00
2.00
3.00
3.00
1.00
2.00
2.00
3.00
3.00
4.00
2.77
3.56
4.50
4.50
5.66
5.66
4.0
4.9
4.9
4.9
6.0
6.0
7.1
7.1
15.0
15.0
15.0
15.0
(p135)
U C T I L E
210D
L O A T I N G
W-K-M
Ductile 210D Floating Ball Valve
A L L
ITEM
MATERIAL
MATERIAL
Body
Seat Retainer
ASTM A395
AISI 1020
Ductile Iron
Steel or ASTM A395 Ductile Iron
ITEM
Stem (3 & 4)
Stem (2)
CONTACT
CONTENTS MENU
u
TECHNICAL DATA
www:
CONTACT
MATERIAL
SS TRIM
AISI 1213
Hard Chrome Plate
AISI 1213
Zinc Plated
AISI 1213
Zinc Plated
Ball
W-K-M
A L V E S
316 SS
316 SS
17-4PH
ITEM
MATERIAL
02 TRIM
MATERIAL
03 TRIM
Seat Ring
Filled TFE
Delrin
TFE
Viton
Filled TFE
TFE
Buna
Filled TFE
Viton and Delrin are registered trademarks of E. I. Dupont de Nemours & Company
Series 125/150
DIM
2R
7.00
3.33
6.00
A
B
C
SIZE
3R
8.00
4.47
7.50
4R
9.00
5.64
9.00
HELP
(p136)
Y N A
210L
E A L
How to Order
XXXXX
L O A T I N G
A L L
Base Part
Number
Pressure
Rating
(CWP)
Body
Material
Seat
Trim
Seal
Material
Ball &
Stem
Grease
Fitting
Handle
1000 psi
Ductile Iron
Line pipe
Threaded End
Buna
No Fitting
Viton
Grease Fitting
Valve Size
Part Number
2 1-1/2
Nylon
(4 3 only)
24925
32
24926
Reinforced Teflon
24927
CONTACT
43
W-K-M
A L V E S
Carbon Steel
Stainless Steel
No Handle
w / Seal Pin
Handle
w /Seal Pin
R
13
CONTENTS MENU
12
12
TECHNICAL DATA
Optional 3 x 2 handle
www:
4" RP
12
CONTACT
Optional 4 x 3 handle
4
7
5
11
2
OPTIONAL
GREASE FITTING
14
16
17
(4 x 3)
HELP
(p137)
Y N A
E A L
210L
L O A T I N G
A L L
W-K-M
A L V E S
Parts List
Ref.
No.
Reqd.
Description
Body (LPT)
(1)*
Adapter (LPT)
(1)
Ball, Non-Unidirectional
or Unidirectional
(1)
(2)
(1)
(2)
(3)
Delrin
(1)
Nylon (4 x 3)
(2)
Teflon
Material
Stem
Seat Ring
CONTACT
CONTENTS MENU
Body Seal
Stem Seal
Teflon
(1)
Buna-N
(2)
Viton
Teflon
Stop Plate
Steel 1018 / 26
10
Spring Steel
11
Stop Pin
Spring Steel
12
Handle
13
Steel
14
Grease Fitting
Steel
15
Label
16
Brass
17
TECHNICAL DATA
www:
Buna-N
(3)
CONTACT
Dimension
Dimension
32
43
5.55
7.25
8.74
No Handle
No Handle
3.56
4.50
5.50
With Handle
With Handle
4.86
4.94
1.50
2.00
3.00
7.06
15.00
21.56
Weight (lbs)
11/2
Valve Size
2
32
43
9.4
16.6
29.1
9.9
19.8
11/2
HELP
(p138)
Y N A
210F
E A L
L O A T I N G
A L L
W-K-M
A L V E S
Retainer Ring
Lever
Stop Plate
Cap Screws
Stem O-Rings
Locking Plate
Stem Seal
Stem
Tailpiece
Gasket
CONTACT
Seat Ring
Tailpiece
Body
Ball
Seat Ring
SD-24093
Tailpiece
Tailpiece
Gasket
CONTENTS MENU
Size
Inches
Port
Reg=R
Full=F
TECHNICAL DATA
Body
Tailpiece
Code
Valve
Type
BallStem
Code
Seal
Code
Actuator
Code
www:
CONTACT
Size
(in)
150RF
300RF
600RF
600RJ
Female
Thread
1R
B200
B220
B214
B270
1F
B210
B228
B282
B272
11/2 R
B200
B214
B270
11/2 F
B210
B228
B282
B272
2R
B200
B220
B214
B270
B236
2F
B210
B228
B282
B272
B238
3R
B200
B220
B214
B270
3F
B210
B228
B282
B272
4R
B200
B220
B214
B270
CS
Stainless Steel
S1
Stainless Steel
NACE
S2
02
Filled TFE
Wrench
WR
03
Delrin/Hydrin O-Ring
Bare Stem
BS
33
Delrin/Hydrin O-Ring
Carbon Steel
CS
CS2
Carbon Steel
Material
Code
Code
Seat
Material
HELP
Material
Actuator Code
(p139)
Y N A
210F
E A L
L O A T I N G
A L L
W-K-M
A L V E S
Standard Materials
Body-Tailpiece Material Codes
Part
CS
CS2*
Part
02
03/33
Body
ASTM A105
ASTM A105
Seat
Rear Seal
Tailpiece Gasket
Stem Seal
Stem O-Rings
Filled PTFE
PTFE
Filled PTFE
Acetal
Hydrin O-Ring
PTFE
Filled PTFE
Tailpiece
AISI 1018
AISI 1018
Lock Plate
Carbon Steel
Zinc Plated
Carbon Steel
Zinc Plated
Carbon Steel
Carbon Steel
Grease Fitting
Carbon Steel
Carbon Steel
Viton
Actuator Codes
CS
S1
S2
AISI 1213
Hard Chrome Plated
AISI 1213
Zinc Plated
316 SS
316 SS
316 SS
17-4PH
Part
CS, CS2
Lock Nut
Handle
Handle Grip
CONTACT
Pressure/Temperature Limits
Seat Seal Codes 02
Temp F
CONTENTS MENU
3/4 11/2
2250
2000
1775
1500
1225
2250
1350
1150
975
800
1500
1300
1150
950
800
-20 to 100
200
250
300
350
Temp F
3/4 11/2
2500
1550
2500
1550
1500
1375
-20 to 100
180
Temp F
3/4 11/2
-20 to 100
180
3000
1550
3000
1550
Weights
TECHNICAL DATA
Regular Port
Full Bore
Valve Size (in)/Type
Class/Weight
ANSI 150
Weight (lbs)
Weight (kg)
ANSI 300
Weight (lbs)
Weight (kg)
ANSI 600 (RF)
ANSI 600 (RJ)
Weight (lbs)
Weight (kg)
TE
Weight (lbs)
Weight (kg)
www:
CONTACT
11/2
B200
6.5
3.0
B220
10.0
4.5
B214
B270
14.0
6.4
B200
9.0
4.0
B214
B270
27.0
12.3
B200
12.5
5.7
B220
25.0
11.4
B214
B270
33.0
15.0
B236
12.0
5.5
B200
52.0
23.6
B220
76.0
34.5
B214
B270
81.0
36.8
B200
81.0
36.8
B220
110.0
50.0
B214
B270
115
52.3
Class/Weight
ANSI 150
Weight (lbs)
Weight (kg)
ANSI 300
Weight (lbs)
Weight (kg)
ANSI 600 (RF)
ANSI 600 (RJ)
Weight (lbs)
Weight (kg)
TE
Weight (lbs)
Weight (kg)
11/2
B210
8.5
3.9
B228
12.0
5.5
B282
B272
16.0
7.3
B210
17.0
7.7
B228
24.0
10.9
B282
B272
32.0
14.5
B210
33.0
15.0
B228
38.0
17.3
B282
B272
47.0
21.4
B238
23.0
10.4
B210
64.0
29.0
B228
82.0
37.3
B282
B272
87.0
39.5
1
11/2
2
3
HELP
275
500
740
1000
1500
90
146
364
637
840
90
199
406
719
1260
102
218
476
868
1680
112
252
567
1050
2030
151
284
686
1236
2390
Bore
Size (in)
3/4
1
11/2
2
3
500
108
264
480
900
2700
108
264
528
980
2940
125
290
610
1110
3330
140
320
726
1300
3900
190
380
895
1520
4560
305
500
1202
2040
420
620
1510
2560
(p140)
500
744
1812
3070
Y N A
210F
E A L
L O A T I N G
A L L
W-K-M
A L V E S
Full Bore
Regular Port
Top View
Top View
Q
R
Stem Dimensions
Stem Dimensions
T
S
G
G
W
F
W
E
CONTACT
D
A
A
Front View
Front View
Dimensional Data (in)
Dimension A
Size
CONTENTS MENU
150RF
1.5 R 6.50
1.5 F
2.0 R 7.00
2.0 F
3.0 R 8.00
3.0 F
www:
600RF
600RJ
TE
B200 B210 B220 B228 B214 B282 B270 B272 B236 B238
1.0 R 5.00
1.0 F
TECHNICAL DATA
300RF
4.0 R 9.00
Q**
H**
6.5
8.50
8.50
.75 1.0 1.0 1.9 3.6 5.8 7/16-20 .44 .25 .50 1.00 .75 10-24
5.00
6.50
8.50
8.50
1.0
5/8-18
9.50
9.50
5/8 -18
6.50
7.50
9.50
9.50
1.5
8.50
11.50
11.62
5.50
7.00
8.50
11.50
11.62
11.12
14.00
14.12
8.00
11.12
14.00
14.12
12.00
17.00
17.12
3.0
6.25 2.0
CONTACT
Dimension A
Size
HELP
150RF
300RF
600RF
600RJ
TE
B200 B210 B220 B228 B214 B282 B270 B272 B236 B238
25 R
127
165
216
216
19 25
25 49
25 F
127
165
216
216
25
92 146 7/16-20 11
Q**
13 25 19 10-24
32 71 100 178
21 32 29
16
21 32
1/4 -20
19
11
/8-18 15
38 R
165
241
241
25 38
32 71 100 178
38 F
165
191
241
241
38
43 90 127 191
3/4-16
38 51
44 90 127 191
51
28
18
32 67 42
3/8 -16
21 38 34
11 21 38
34
/16-18
51 R
178
216
292
295
140
51 F
178
216
292
295
159
76 R
203
282
356
259
51 76
28
18 28 67 42
3/8 -16
76 F
203
282
356
359
76
28
18 28 76 38
1/2 -13
305
432
435
28
18 28 76 38
1/2 -13
/4 -16 19
29
/4 -20
5/8 -18
102 R 229
H**
(p141)
/16-18
H O K E S
A N D
T H O R N H I L L C R AV E R
O U P L I N G S
NOTE: Beans for Positive Chokes are not furnished and must
be ordered separately (see pages 157-159)
CONTACT
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
HELP
(p142)
A R T S
Washer
Hex Nut
T H O R N H I L L C R AV E R
E T A I L
Handwheel
Pipe Plug-1/2" NPT
Nut Member
Blanking Plug
Stem
Indicator
Blanking Plug
Seal Ring
Yoke Hub
Stem Lock
T-Head Bolt/Nut
Yoke Nut
Member
Body
CONTACT
Flow Bean
Pkg. Ret. Ring
Bean Gasket
Stem Seat
Metallic Seat Gasket
Body
Coupling Nut
Member
Coupling
Seal Ring
Seal Ring
Plain Hub
Nut Member
CONTENTS MENU
Plain Hub
Adjustable Choke
Positive Choke
TECHNICAL DATA
www:
Trim T1
BodyLow Alloy SteelAPI 75K
StemLow Alloy SteelCarburized and Hardened
SeatLow Alloy SteelCarburized and Hardened
Yoke Hub/Blanking PlugLow Alloy Steel
API 60K or 75K
CONTACT
Trim T2
BodyLow Alloy SteelAPI 75K
StemMartensitic Stainless Steel and Tungsten Carbide
SeatMartensitic Stainless Steel and Tungsten Carbide
Yoke Hub/Blanking PlugLow Alloy Steel
API 60K or 75K
Trim T3
BodyMartensitic Stainless SteelAPI 75K
StemMartensitic Stainless Steel and Tungsten Carbide
SeatMartensitic Stainless Steel and Tungsten Carbide
Yoke Hub/Blanking PlugMartensitic Stainless Steel
API 75K
HELP
(p143)
H O K E
T H O R N H I L L C R AV E R
C C E S S O R I E S
Part Name
Order
Number
Fig. 110-C
90205
Fig. 110-V
90206
Fig. 112-V
90224
91721
CONTACT
CONTENTS MENU
SD-10902
Order
Number
Part Name
TC-560
Bleeder Plug
(Stainless Steel)
90017
TC-2213
Bleeder Plug
(Stainless Steel)
90294
TC-2273
Bleeder Plug
(Stainless Steel)
90509
TC-1674
90018
TC-576
SD-10894
TC-560-12-CR
Stainless Steel
Bleeder Plug
90508-002
SD-10894
TC-2213-12-CR
Stainless Steel
Bleeder Plug
SD-10894
TC-2273-12-CR
Stainless Steel
Bleeder Plug
TECHNICAL DATA
www:
CONTACT
Model
Number
Part Name
Order
Number
TC-1284
Cage Nipple
90554-001
TC-1082
Cage Nipple
90544-001
TC-2068
Cage Nipple
TC-1018
Cage Nipple
90540-001
TC-1021
Cage Nipple
90541-001
TC-1022
Cage Nipple
90542-001
TC-1681
Cage Nipple
90543-001
Material
92331
SD-10894
SD-10894
Insert TC-575
(See Page 150)
HELP
TC-1018
Cage Nipple
(p144)
I M E N S I O N A L
T H O R N H I L L C R AV E R
A T A
CONTACT
Maximum (Outlet)
CWP
A*
Size
(Inlet)
B*
C (Adj.)* C (Pos.)*
Adjustable
Positive
Choke Wt. (lbs) Choke Wt. (lbs)
Outlet
Inlet
UNIBOLT BW
UNIBOLT BW
2"
3000
87/8
10
243/16
153/16
93
71
UNIBOLT LP
UNIBOLT LP
2"
3000
85/8
93/4
2315/16
1415/16
93
71
71/2
2411/16
1511/16
123
101
2513/16
1613/16
158
145
153/16
Flanged
Flanged
2" API
3000
93/8
Flanged
Flanged
3" API
3000
101/2
UNIBOLT BW
UNIBOLT BW
2"
5000
87/8
10
243/16
93
71
UNIBOLT LP
UNIBOLT LP
2"
5000
85/8
93/4
2315/16
1415/16
93
71
71/2
2411/16
1511/16
Flanged
Flanged
2" API
5000
93/8
123
101
Flanged
Flanged
3" API
5000
111/8
85/8
267/16
177/16
195
173
105/8
261/4
171/4
144
110
267/8
183/4
134
115
267/8
177/8
133
114
(Inlet)
B*
C (Adj.)*
C (Pos.)*
Adjustable
Choke Wt. (lbs)
Positive
Choke Wt. (lbs)
UNIBOLT BW
UNIBOLT BW
2"
10,000
101/2
Flanged
Flanged
13/16"
10,000
111/8
Flanged
21/16"
10,000
111/8
Flanged
CONTENTS MENU
UNIBOLT Chokes with Taper -Type Seal (inches)
Dimension
TECHNICAL DATA
Outlet
Inlet
Threaded
Threaded
Maximum (Outlet)
CWP
A*
Size
2"
2000
61/4
31/4
183/16
1123/32
38
27
53/8
205/16
1327/32
Flanged
Flanged
2" API
2000
83/8
57
48
Flanged
Flanged
2" ANSI
1480
83/8
53/8
205/16
1327/32
57
48
UNIBOLT BW
(XXH)
Flanged
21/16"
2"
10,000
113/8
281/16
177/8
125
100
Flanged
Flanged
113/16" API
10,000
91/4
2415/16
15
115
90
Flanged
Flanged
21/16" API
10,000
111/8
2713/16
173/8
123
97
Flanged
Flanged
113/16"
API
15,000
81/4
81/4
2415/16
161/2
167
137
Flanged
Flanged
21/16" API
15,000
81/4
81/4
2415/16
161/2
175
145
Flanged
Flanged
113/16"
API
20,000
911/16
911/16
265/8
191/16
232
211
Flanged
Flanged
21/16" API
20,000
911/16
911/16
265/8
191/16
272
251
www:
CONTACT
Design
Outlet
Conventional
Stem /Seat
Design
Force
Balanced
Stem
Design
HELP
Size
Inlet
Flanged
Flanged
3" API
3000
85/8
267/8
1631/32
182
148
Flanged
Flanged
3" API
5000
91/4
91/4
271/8
177/32
195
161
91/4
195
Flanged
Flanged
3" API
5000
91/4
Flanged
31/16"
Flanged
31/16"
3" API
10,000
113/4
103/8
3219/32
2015/16
270
Flanged
41/16"
Flanged
41/16"
3" API
10,000
131/4
111/4
343/32
227/16
Flanged
29/16"
Flanged
29/16"
3" API
10,000
107/8
87/8
3123/32
201/16
240
Positive
Choke Wt. (lbs)
(p145)
I M E N S I O N A L
T H O R N H I L L C R AV E R
A T A
Heater Chokes
Barrel
O.D.,F.
Weight,
Lbs.
Nominal
Size
2"
1415/16
121/4
311/16
41/8
87
2"
31/8
Wt. w/
UNIBOLT,
Lbs.
116
CONTACT
Weight,
Lbs.
170
TECHNICAL DATA
www:
CONTACT
Weight,
Lbs.
1611/16
31/2
27/8
13/8
119/16
189
175
27/8
1,100
235
165/16
47/8
1611/16
47/8
81/4
1715/16
16
51/2
911/16
113/16"15,000
HELP
(p146)
D J U S T A B L E
T H O R N H I L L C R AV E R
H O K E S
How to Order
2" 2000 lb CWP UNIBOLT
Threaded Inlet x Threaded Outlet, or
Flanged Inlet x Flanged Outlet
90156-
XX
XXXXX-
Inlet/Outlet
Stainless Steel 1
22
33
CONTACT
Seat Bore
.50" Bore
.75" Bore
Base Number
Flanged Inlet
90034-
Service
Steel
Standard
NACE 2
2-1/16" 3000
2-1/16" 5000
2-1/16" 2000
Seat Bore
.50" Bore
.75" Bore
1.00" Bore
Steel
Stainless Steel 1
Tungsten Carbide
2" SCH 80 BW
Outlet
Outlet
Outlet
Inlet
Outlet
Inlet
CONTENTS MENU
Threaded by Threaded
Flanged by Flanged
Inlet
*P/N
TECHNICAL DATA
Inlet
Flanged by UNIBOLT
Threaded by UNIBOLT
92931-
www:
Stainless Steel 1
Tungsten Carbide
XXXXX-
CONTACT
Seat Bore
.50" Bore
.75" Bore
1.00" Bore
2" SCH 80 BW
Base Number
Service
Outlet
Standard
.75" Bore
NACE 2
1.00" Bore
Stainless Steel 1
Tungsten Carbide
9328692929-
API Flanges
RF Flanges
RTJ Flanges
Code
RTJ Flanges
92930-
11
Inlet/Outlet
Standard
22
NACE 2
33
44
55
3-1/8" 5000
66
3-1/8" 3000
Inlet
Service
1
RF Flanges
Inlet
API Flanges
UNIBOLT by UNIBOLT
XX
.50" Bore
Outlet
HELP
Seat Bore
Flanged by Flanged
4" 600 RF
3" 600 RF
77
2" 150 RF
88
99
(p147)
D J U S T A B L E
T H O R N H I L L C R AV E R
H O K E S
How to Order
2" 10,000 UNIBOLT (Ring-Groove or Taper-Type Seal)
API Flanged Inlet x Flanged Outlet
XXXXX-
XX
XXXXX-
Service
2
3
NACE 2
Base Number
NACE 2
2-1/16" 10,000*
Seat Bore
.50" Bore
.75" Bore
1.00" Bore
1.00" Bore
Stainless Steel
90303-
1-13/16" 10,000
.75" Bore
Tungsten Carbide
Inlet/Outlet
1-13/16" 10,000
11
2-1/16" 10,000
22
2-9/16" 10,000
33
3-1/16" 10,000*
44
Standard
.50" Bore
Steel
Service
Base Number
CONTACT
Standard
Seat Bore
90309-
1
2
3
2" SCH 80 BW
Steel
2-1/2" 1.10" ID BW
Stainless Steel 1
2-1/2" 1.38" ID BW
Tungsten Carbide
Flanged by Flanged
CONTENTS MENU
TECHNICAL DATA
Flanged by UNIBOLT
Inlet
Inlet
90268-
www:
CONTACT
Steel
Stainless Steel 1
Tungsten Carbide
.50" Bore
.75" Bore
1.00" Bore
Outlet
Standard
.75" Bore
NACE 2
Base Number
15,000 PSI WP 90271-
Stainless Steel
Tungsten Carbide
Inlet/Outlet
2" SCH 80 BW
Standard
NACE 2
2-1/2" 1.10" ID BW
2-1/2" 1.38" ID BW
11
2-1/16" 15,000
22
2-1/16" 20,000
33
Outlet
Inlet
Flanged by Flanged
Code
2-9/16" 15,000
Service
1
Inlet
.50" Bore
UNIBOLT by UNIBOLT
XX
Seat Bore
Body Material
1
2-1/2" 1.38" ID BW
2-1/2" 1.10" ID BW
Service
HELP
Seat Bore
XXXXX-
(p148)
D J U S T A B L E
T H O R N H I L L C R AV E R
H O K E S
How to Order
3" 3000/5000 UNIBOLT (Taper-Type Seal)
Flanged End Connection, 2" Max Open, 1996 Design
Assembly Part Number (see page 138 for P/N example
XXXXX-
Base Number
API Flanges
93281-
RF Flanges
93396-
RTJ Flanges
93397-
Steel
Stainless Steel
Tungsten Carbide
Seat Bore
2
XX
Inlet/Outlet
Service
1
API Flanges
RF Flanges
RTJ Flanges
Code
11
22
1.00" Bore
1.50" Bore
1.75" Bore
3-1/8" 5000
3" 600 RF
2.00" Bore
33
44
Standard
NACE
CONTACT
4" 600 RF
55
66
4" 900 RF
77
4" 1500 RF
88
Outlet
Flanged by Flanged
Inlet
CONTENTS MENU
3" 3000/5000 UNIBOLT (Taper-Type Seal)
UNIBOLT End Connection, 2" Max Open, 1996 Design
Assembly Part Number
XXXXX-
TECHNICAL DATA
Base Number
3" Plain Hub
93398-
93399-
www:
Steel
1.00" Bore 2 1
Seat Bore
Standard
Stainless Steel 1
1.50" Bore
NACE 3
Tungsten Carbide
1.75" Bore
2.00" Bore
Service
CONTACT
Code
3" SCH 80 BW
4" SCH 80 BW
Outlet
Outlet Conn Plain Hub
Code
3" SCH 80 BW
4" SCH 80 BW
UNIBOLT by UNIBOLT
Inlet
Notes: 1 - SS Yoke Hub recommended with SS Stem (Body & Yoke Hub option 3).
2 - 1.00" Bore Seat available in Tungsten Carbide only.
3 - Tungsten Carbide Stem and Seat required for NACE Service.
HELP
(p149)
O R C E
A L A N C E D
T H O R N H I L L C R AV E R
H O K E S
How to Order
3" 5,000/10,000 UNIBOLT (Taper-Type Seal)
API Flanged Inlet x Flanged Outlet, Handwheel Operated
Assembly Part Number (see page 138 for P/N example)
XXXXX-
Base Number
5,000 PSI WP
90395-
Alloy Steel
Stainless Steel
Seat Bore
XX
Inlet/Outlet
Service
Stainless Steel
1.50" Bore
Tungsten Carbide
1.75" Bore
2.00" Bore
Standard
NACE
11
22
33
Viton
CONTACT
Outlet
Flanged by Flanged
Inlet
CONTENTS MENU
Upper stem
TECHNICAL DATA
www:
CONTACT
Stem
Coupling
Lower stem
SEE DETAIL A
Vent
Sleeve
Seals
Stem Seals
SEE DETAIL B
DETAIL A
Vent
Sleeve
Stem Seals
HELP
Note: 1 - Tungsten Carbide Stem and Seat required for NACE Service.
(p150)
O N G
O S E
E A T E R
How to Order
CONTACT
T H O R N H I L L C R AV E R
H O K E S
Inlet Conn
Service
Standard
NACE
Seat Bore
Stainless Steel
Tungsten Carbide
.50" ID
.75" ID
1.00" ID
2" SCH 80
2-1/2"1.38"ID
2" SCH 80
2-1/2"1.38"ID
Outlet
UNIBOLT by UNIBOLT
CONTENTS MENU
Inlet
90183-
XX
90113-
TECHNICAL DATA
Stem & Seat Material
Service
Steel
Standard
Stainless Steel
NACE 1
Tungsten Carbide
www:
2" NPT
11
CONTACT
Inlet Conn
Standard
NACE 1
Seat Bore
Service
Inlet/Outlet
Seat Bore
.50" ID
.75" ID
Steel
1.00" ID
Stainless Steel
Tungsten Carbide
Lug Hub
(No Plain Hub) 0
2" SCH XXH
.50" ID
.75" ID
2-1/2"1.1" ID
1.00" ID
2-1/2"1.38" ID
(XXXH)
2-1/2"SCH 160
Outlet Conn
Lug Hub
(No Plain Hub) 0
Outlet
PRINT
Inlet
2" SCH 80
Outlet
Threaded by Threaded
UNIBOLT by UNIBOLT
Inlet
2-1/2"1.1"ID
2-1/2"1.38"ID
(XXXH)
2-1/2"SCH 160
HELP
Note: 1 - Tungsten Carbide Stem and Seat required for NACE Service.
(p151)
O N G
O S E
E A T E R
T H O R N H I L L C R AV E R
H O K E S
How to Order
2" 15,000 lb UNIBOLT (Taper Type Seal)
Flanged Inlet x UNIBOLT Outlet
90337-
Service
Standard
NACE 1
CONTACT
90668-
Inlet Conn
Service
1-13/16" 15,000 lb 1
Standard
NACE 1
Outlet Conn
Seat Bore
Seat Bore
.50" ID
1.38" Dia ID
.50" ID
.75" ID
2" SCH 80
.75" ID
2-1/2" SCH 80
4
Stem & Seat Material
Stainless Steel
Stainless Steel
Tungsten Carbide
Tungsten Carbide
Outlet
Inlet Conn
1.1" Dia ID
1-13/16" 20,000 lb 1
Outlet Conn
1.1" Dia ID
Outlet
Flanged by UNIBOLT
Flanged by UNIBOLT
Inlet
Inlet
CONTENTS MENU
2" 6500 lb UNIBOLT Adjustable Economy Heater Chokes
Threaded Inlet x Threaded Outlet
90071-
TECHNICAL DATA
www:
CONTACT
HELP
XX
Service
Steel
Standard
Inlet/Outlet
2" NPT
11
Stainless Steel
NACE 1
Socket Weld
22
Tungsten Carbide
Seat Bore
.50" ID
.75" ID
1.00" ID
Outlet
Inlet
Threaded by Threaded
or
Socket Weld by Socket Weld
Note: 1 - Tungsten Carbide Stem and Seat required for NACE Service.
(p152)
N I B O L T
T E A M
T H O R N H I L L C R AV E R
H O K E S
How to Order
The Packing Stays Put
Outside temperature: 50F
Steam temperature: 800F
It is reassuring to know a Thornhill Craver steam choke is
on the job. Because when recovering viscous crudes, youre
completely aware of the monumental maintenance headaches a
different choke can produce. Most use rotating stems, which
can grab the packing and pull it out of place. Its downhill from
CONTACT
there. Steam escapes, condenses and freezes, creating a granitelike buildup of ice on the choke, overnight. Even if temperatures are ambient, the nature of your problem doesnt change; a
corrosive buildup can be as hard as the ice.
Fortunately, Thornhill Craver chokes dont use rotating
stems. Stem movement is linear one direction. It doesnt
grab the packing so no leaks occur. Just reliable service.
CONTENTS MENU
If packing adjustment is ever needed, the choke packing
gland is easily accessible.
And if conversion from adjustable to positive action is
required, again its good Thornhill Craver is on the job.
Our famous UNIBOLT coupling needs but one man and one
XX
Service
Stainless Steel
Standard
2" NPT
11
NACE 1
2" 600 RF
22
33
2-1/16" 2000
44
Inlet/Outlet
Seat Bore
.50" ID
.75" ID
Outlet
Inlet
Threaded by Threaded
TECHNICAL DATA
www:
CONTACT
93179-
Service
Standard
2" NPT
NACE
2" SCH 80 BW
1
2
Outlet
Seat Bore
93119-
Service
Standard
SCH XXH BW
NACE 1
SCH 160 BW
SCH 80 BW
2" NPT
Inlet
Seat Bore
.50" ID
.50" ID
.75" ID
.75" ID
Outlet
1.00" ID
1.00" ID
SCH XXH BW
SCH 160 BW
HELP
SCH 80 BW
2" NPT
Outlet
Outlet
Inlet
Threaded by UNIBOLT
UNIBOLT by UNIBOLT
Inlet
(p153)
N I B O L T
T E A M
T H O R N H I L L C R AV E R
H O K E S
Recommended
Temperature (F)
Maximum Working
Pressure (psi)
Recommended
Temperature (F)
Maximum Working
Pressure (psi)
200
300
400
500
600
650
700
800
2850
2775
2775
2775
2700
2650
2500
2500
200
300
400
500
600
700
800
1900
1850
1850
1850
1800
1750
1650
CONTACT
CONTENTS MENU
Metal-to-metal seats
Non-rotating stem
TECHNICAL DATA
www:
CONTACT
HELP
(p154)
O S I T I V E
T H O R N H I L L C R AV E R
H O K E S
How to Order
Flow Beans Ordered Separately - see pg 149-150)
2" 2000lb UNIBOLT Positive Choke with Taper-Type Seal
Threaded x Threaded
Flanged x Flanged
J090179-
000
XX
XXXXX-
00
Service
Alloy Steel
Blind
Alloy Steel
Standard
CONTACT
Stainless Steel
NACE
1
2
2" SCH 80 BW
Inlet/Outlet
90051
2-1/16" 3000
2-1/16" 5000
2-1/16" 2000
Blind
22
33
Base Number
Flanged Inlet
OUTLET
OUTLET
OUTLET
OUTLET
CONTENTS MENU
INLET
INLET
Threaded x Threaded
TECHNICAL DATA
Flanged x Flanged
Threaded x UNIBOLT
Flanged x UNIBOLT
J092908-
www:
INLET
INLET
00
Service
Service
Alloy Steel
Standard
Alloy Steel
Standard
Blind
Stainless Steel
NACE
Stainless Steel
NACE
2" SCH 80 BW
CONTACT
Inlet Conn Body
2" SCH XXH BW
XXXXX-
00
XX
Inlet/Outlet
Base Number
API Flanges
RTJ Flanges
Code
API Flanges
J090030
11
Blind
RF Flanges
J092888
22
RTJ Flanges
J092889
33
44
RF Flanges
55
3-1/8" 5000
66
4" 600 RF
3-1/8" 3000
3" 600 RF
77
2" 150 RF
88
99
HELP
UNIBOLT x UNIBOLT
Flanged x Flanged
(p155)
O S I T I V E
T H O R N H I L L C R AV E R
H O K E S
How to Order
2" 10,000lb UNIBOLT Positive Choke
(Ring-Groove Type or Taper-Type Seal)
API Flanged Inlet x Flanged Outlet
XXXXX
00
Service
Alloy Steel
Standard
Stainless Steel
XXXXX-
1-13/16" 10,000
2-1/16" 10,000
2-9/16" 10,000
3-1/16" 10,000
(Ring-Groove
Type Seal Only)
Base Number
00
Service
Standard
22
Stainless Steel
NACE
2" SCH 80 BW
33
44
Base Number
Taper-Type Seal
CONTACT
Alloy Steel
90729
11
Inlet /Outlet
NACE
XX
Blind
92907
1-13/16" 10,000 1
2-1/2" 1.10" ID BW
2-1/16" 10,000
(Ring-Groove
2
Type Seal Only)
2-1/2" 1.38" ID BW
CONTENTS MENU
Flanged x UNIBOLT
Flanged x Flanged
TECHNICAL DATA
90710-
www:
00
Service
Body Material
Alloy Steel
Standard
Alloy Steel
Standard
1-13/16" 15,000
11
Stainless Steel
NACE
Stainless Steel
NACE
2-1/16" 15,000
22
2" SCH 80 BW
2-9/16" 15,000
33
CONTACT
J090730-
00
Service
XX
Inlet/Outlet
2-1/2" 1.10" ID BW
2-1/2" 1.38" ID BW
Blind
Tapped F/9/16"
Autoclave Fitting
2-1/2" 1.10" ID BW
2-1/2" 1.38" ID BW
Blind
Flanged x Flanged
HELP
UNIBOLT x UNIBOLT
(p156)
O S I T I V E
T H O R N H I L L C R AV E R
H O K E S
How to Order
3" 3000/5000lb UNIBOLT Positive Choke
(Taper-Type Seal) 2" Max Open
Flanged Inlet x Flanged Outlet
XXXXX-
00
XX
XXXXX-
Service
Alloy Steel
Standard
Blind
Alloy Steel
Blind
Stainless Steel
NACE
Stainless Steel
Base Number
Base Number
API Flanges
RF Flanges
RTJ Flanges
Code
11
API Flanges
90108
RF Flanges
93091
3-1/8" 5000
3" 600 RF
22
RTJ Flanges
93376
33
Service
93278
Standard
90315
NACE
44
55
4" 600 RF
66
4" 900 RF
77
4" 1500 RF
88
3" SCH 80 BW
4" SCH 80 BW
3" SCH 80 BW
4" SCH 80 BW
3" NPT
Threaded
4" NPT
Threaded
3" NPT
Threaded
4" NPT
Threaded
Code
CONTENTS MENU
Flanged x Flanged
TECHNICAL DATA
www:
00
XX
Service
Alloy Steel
Standard
2-9/16" 10,000
11
Stainless Steel
NACE
3 -1/16" 10,000
22
4 -1/16" 10,000
33
Inlet/Outlet
CONTACT
Flanged x Flanged
HELP
Inlet/Outlet
CONTACT
00
(p157)
Code
O S I T I V E
H O K E
L O W
T H O R N H I L L C R AV E R
E A N S
Part Name
TC-3862
TC-3862-12CR
1/64"
*Bean size
through 1"
Order
Number
Alloy Steel
90654-OXX
12 CR SS
90655-OXX
TC-3890
Alloy Steel
90659-OXX
TC-3863
12 CR SS
92334-OXX
TC-4237
05521-220
Note: To order Beans, specify Base Part Number and Size in fractional
increments of 1/64".
Example: TC-3863. Carbide 1/64"; Part # = 92334-001.
CONTACT
Material
CONTENTS MENU
Part Name
TC-2850
TC-2850
TC-3257*
TC-3257*
TC-3257*
TC-3367
Material
Order
Number
Alloy Steel
90111-XXX
12 CR SS
90112-XXX
Alloy Steel
90590-001
12 CR SS
90590-002
Tungsten Carbide
90591-002
Tungsten Carbide
Insert
**
05520-230
O Ring
**Use TC-1003P Style Beans with this Master Bean.
**For Part Number, please consult factory.
*Order separately for above beans.
TECHNICAL DATA
www:
CONTACT
TC-3257 Master
TC-2850 Positive
Bean for 3,000 lb
CWP, 5,000 lb CWP,
and 10,000 lb CWP.
2" maximum open
Positive Choke w/
Taper-Type Seal.
SD-10906
SD-10906
SD-10906
HELP
(p158)
O S I T I V E
H O K E
L O W
T H O R N H I L L C R AV E R
E A N S
Part Name
TC-1003P
Alloy Steel
90031-OXX
TC-1003P
12 CR SS
90032-OXX
TC-574
Alloy Steel
90568-001
TC-574
12 CR SS
90568-002
TC-575
Alloy Steel
90571-OXX
TC-2742
Alloy Steel
90586-OXX
TC-2742
12 CR SS
90587-OXX
TC-3444
12 CR SS
92332-OXX
TC-1016
Gasket
90016-002
90508-002
TC-576
CONTACT
Order
Number
Material
CONTENTS MENU
Part Name
TC-1017M
Alloy Steel
90537-OXX
TC-1017M
12 CR SS
90538-OXX
TC-573
Alloy Steel
90567-001
TC-573
12 CR SS
90567-002
TC-3445
12 CR SS
92333-OXX
TC-1019
Gasket
90173-002
TECHNICAL DATA
Order
Number
Material
Not
1/64".
www:
CONTACT
SD-10906
TC-575
Bean Insert
SD-10906
SD-10906
SD-10906
SD-10906
TC-1003P
Flow Bean
TC-574
Master Bean
TC-1017M
Flow Bean
TC-573
Master Bean
HELP
(p159)
E A N S
A N D
E A T
/B
E A N
CONTACT
CONTENTS MENU
T H O R N H I L L C R AV E R
R E N C H E S
TECHNICAL DATA
www:
Choke Seat and Bean Wrenches
CONTACT
SD-10894
SD-10894
SD-10894
HELP
(p160)
H O K E
O K E
CONTENTS MENU
3,000/
5,000 lb CWP
Order Number
10,000 lb CWP
Order Number
92892-111
92894-111
92897-111
92896-111
92892-112
92894-112
92897-112
92896-112
92892-113
92894-113
92896-113
92892-121
92894-121
92897-121
92896-121
92892-122
92894-122
92897-122
92896-122
92892-123
92894-123
92896-123
92892-131
92894-131
92896-131
92892-132
92894-132
92896-132
92892-133
92894-133
92896-133
12 CR SS Yoke/
Stem, 1/2" Ind.
92892-221
92894-221
12 CR SS Yoke/
Stem, 1/2" Ind.
92896-221
92899-221
92902-221
12 CR SS Yoke/
Stem, 3/4" Ind.
92892-222
92894-222
12 CR SS Yoke/
Stem, 3/4" Ind.
92896-222
92899-222
92902-222
12 CR SS Yoke/
Stem, 1" Ind.
92892-223
92894-223
12 CR SS Yoke/
Stem, 1" Ind.
92896-223
12 CR SS Yoke/Tungsten
Carbide Stem, 1/2" Ind.
92892-231
92894-231
12 CR SS Yoke/Tungsten
Carbide Stem, 1/2" Ind.
92896-231
92899-231
92902-231
12 CR SS Yoke/Tungsten
Carbide Stem, 3/4" Ind.
92892-232
92894-232
12 CR SS Yoke/Tungsten
Carbide Stem, 3/4" Ind.
92896-232
92899-232
92902-232
12 CR SS Yoke/Tungsten
Carbide Stem, 1" Ind.
92892-233
92894-233
12 CR SS Yoke/Tungsten
Carbide Stem, 1" Ind.
92896-233
Description
CONTACT
T H O R N H I L L C R AV E R
S S E M B L I E S
Description
www:
CONTACT
HELP
3,000/
6,500 lb CWP
5,000 lb CWP Order Number
Order Number
Description
TECHNICAL DATA
Yoke Assemblies
2" Maximum Opening Chokes
Description
3,000/5,000 lb CWP
Order Number
92903-111
92893-111
92898-111
92895-111
92903-112
92893-112
92898-112
92895-112
92903-113
92893-113
92898-113
92895-113
12 CR SS Yoke/Stem
92903-121
12 CR SS Yoke/
Tungsten Carbide Stem
92903-122
92893-121
92898-121
92895-121
92893-122
92898-122
92895-122
92893-123
92898-123
92895-123
92893-131
92898-131
92895-131
92900-131
92893-132
92898-132
92895-132
92900-132
92893-133
92898-133
92895-133
12 CR SS Yoke/
Stem, 1/2" Ind.
92893-221
92898-221
92895-221
92900-221
12 CR SS Yoke/
Stem, 3/4" Ind.
92893-222
92898-222
92895-222
92900-222
12 CR SS Yoke/
Stem, 1" Ind.
92893-223
92898-223
92895-223
12 CR SS Yoke/Tungsten
Carbide Stem, 1/2" Ind.
92893-231
92898-231
92895-231
92900-231
12 CR SS Yoke/Tungsten
Carbide Stem, 3/4" Ind.
92893-232
92898-232
92895-232
92900-232
12 CR SS Yoke/Tungsten
Carbide Stem, 1" Ind.
92893-233
92898-233
92895-233
(p161)
N E U M A T I C
D A P T E R
T H O R N H I L L C R AV E R
S S E M B L I E S
CONTACT
SD-10900
CONTENTS MENU
Yoke Adapter Assemblies for Fisher Pneumatic Operation for
UNIBOLT Regular and Heater Chokes 3000/5000/6500/10,000/15,000 lb CWP
Yoke Adapter Assembly Description
TECHNICAL DATA
www:
CONTACT
2" 3000 lb CWP or 5000# CWP Regular Choke with Ring Groove Seal
for Fisher Size 45 Actuator
92910-120
92910-130
2" 3000 lb CWP or 5000# CWP Heat Choke with Ring Groove Seal
for Fisher Size 45 Actuator
92911-120
92911-130
92917-120
92917-130
92913-120
92913-130
92916-120
92916-130
92909-120
92909-130
92914-120
92914-130
93209-120
93209-130
93180-121
93180-131
HELP
(p162)
U N I B O LT H I G H P R E S S U R E S T E E L C O U P L I N G S
Order Numbers
Order Numbers
Size
Order
Number
With SS
Seal Ring
1"
2"
2-1/2"
3"
4"
5"*
91379-001
90189-001
91380-001
91381-001
91382-001
91377-001
91379-002
90189-002
91380-002
91381-002
91382-002
91377-002
Size
Schedule
Order
Number
With SS
Seal Ring
Sch. 160
XXH
Sch. 160
XXH
91397-001
91402-001
91398-001
90193-001
91397-002
90193-002
90194-002
90193-002
5"
6"
Order Numbers
10,000 lb WP, 2"-5" Butt Weld Only
Size
Order Numbers
Schedule
Order
Number
With SS
Seal Ring
Sch. 160
XXH
XXXH
XXH
XXH
XXH
XXH
91407-001
90200-001
91585-001
91408-001
91586-001
91587-001
91588-001
91407-002
90200-002
91408-002
91586-002
91587-002
91588-002
CONTACT
CONTENTS MENU
TECHNICAL DATA
T H O R N H I L L C R AV E R
Schedule
Sch. 80
1"
Sch. 160
XXH
Sch. 40
Sch. 80
2"
Sch. 160
XXH
Sch. 40
Sch. 80
2-1/2"
Sch. 160
XXH
Sch. 40
Sch. 80
3"
Sch. 160
XXH
Sch. 80
4"
Sch. 160
XXH
Order
Number
With SS
Seal Ring
91394-001
91397-001
91402-001
91591-001
90195-001
90194-001
90193-001
91593-001
91395-001
91398-001
91403-001
91592-001
90237-001
90236-001
90235-001
91396-001
91399-001
91404-001
91394-002
91397-002
91402-002
91591-002
90195-002
90194-002
90193-002
91395-002
91398-002
91403-002
91592-002
90237-002
90236-002
90235-002
91396-002
91399-002
91404-002
2"
2-1/2"
3"
4"
5"
Order Numbers
3000 lb. WP, 5" and 6" Butt Weld Only
Size
www:
5"
CONTACT
6"
Order Number
Sch. 40
Sch. 80
Sch. 160
XXH
XXH
91389-001
91390-001
91391-001
91392-001
90193-001
Order Numbers
15,000 lb WP, 2-1/2" Butt Weld Only
Size
Order Number
2-1/2"
XXXH
XXH
3,000 psi
Sch 40
Bore
3000 psi
Sch 80
Bore
5,000 psi
Sch 160
Bore
5,000 psi
Sch XXH
Bore
0.957
0.815
0.599
2.067
1.939
1.689
1.503
2-1/2
2.469
2.323
2.125
1.771
3.068
2.900
2.626
2.300
Nom.
Size
91589-001
91590-001
3.826
3.438
3.152
Nom.
Size
3,000 psi
Sch 40
Bore
3,000 psi
Sch 80
Bore
3,000 psi
Sch 160
Bore
3,000 psi
Sch XXH
Bore
5*
5.047
4.813
4.313
4.063
6*
4.897
Nom.
Size
5,000 psi
Sch 160
Bore
5,000 psi
Sch XXH
Bore
5*
4.313
4.063
6*
5.189
4.897
Nom.
Size
10,000 psi
Sch 160
Bore
10,000 psi
Sch XXH
Bore
1.689
1.503
2-1/2
1.771
2.300
3.152
Nom.
Size
15,000 psi
Sch XXXH
Bore
15,000 psi
1.1 ID
Bore
2-1/2
1.38
1.10
Blind
Bleeder Plug
UNIBOLT Blanking Plugs are interchangeable with Plain Hubs, and are
furnished: Blind, 1/2" NPT or tapped for Bleeder Plug. Most sizes available with Blanking Plug and PLUGLOK instead of plain hub. PLUGLOK
Safety System is standard when Blanking Plug ordered. Consult factory
for how to order.
HELP
3,000 lb UNIBOLT Butt weld
Steel Coupling
1/2" NPT
(p163)
U N I B O LT H I G H P R E S S U R E S T E E L C O U P L I N G S
Threaded End
T H O R N H I L L C R AV E R
3,000/5,000
Butt weld end
10,000/15,000
Butt weld end
CONTACT
CONTENTS MENU
Coupling
TC
Bolts and Nuts
Weight,
Ring
Model
Lbs.
Size
Number Number
1-3/4
3-27/32
1-5/8
3-3/8
2-1/8
1-5/8
1.049
TC-853
TC-648
3/8 x 2-3/4
2-3/8
2-5/8
5-1/8
2-7/8
5-3/8
3-1/8
2-7/16
12-1/2
TC-544
TC-562
1/2 x 3-3/4
2-1/2
3-1/8
6-1/4
3-3/8
6-1/8
3-5/8
2-7/8
2-1/2
20-1/4
TC-545
TC-563
5/8 x 4-1/4
3-1/8
6-1/4
4-3/16
6-3/4
4-1/16
2-7/8
24
TC-546
TC-564
5/8 x 4-3/4
4-1/4
8-3/8
5-1/2
8-11/16
5-3/16
3-1/2
53
TC-547
TC-754
3/4 x 5-1/4
5-1/8
10-6/16
6-1/2
10-1/2
6-1/8
4-1/16
83
TC-578
TC-566
3/4 x 5-3/4
Dimensional Data (inches), 3000 lb/5000 lb/10,000 lb/15,000 lb WP, Butt Weld
Dimension
Nom.
Size
1
TECHNICAL DATA
Dimension
2-1/8
2-1/2
4-23/32
1.315
3-3/8
2-1/8
1-5/8
See Pipe
Bore
Chart on
previous
page
Coupling
Weight,
Lbs.
TC
Ring
Number
Size
TC-853
TC-648
3/8 x 2-3/4
15
TC-544
TC-562
1/2 x 3-3/4
24
TC-545
TC-563
5/8 x 4-1/4
30
TC-546
TC-564
5/8 x 4-3/4
2-5/8
3-3/8
6-1/8
2-3/8
5-3/8
3-1/8
2-7/16
2-1/2
3-7/8
2-7/8
6-1/8
3-5/8
2-7/8
3 1/2
7-5/8
3-1/2
6-3/4
4-1/16
2-7/8
5-3/8
9-9/16
4-1/2
8-11/16
5-3/16
3-1/2
60
TC-547
TC-754
3/4 x 5-1/4
www:
CONTACT
*5
5-1/8
10-5/16
5-5/8
10-1/2
6-1/8
4-1/16
89
TC-578
TC-566
3/4 x 5-3/4
*6
4 3/16
5 1/8
9-1/2
6-5/8
10-1/2
6-1/8
4-1/16
90
TC-578
TC-566
3/4 x 5-3/4
6-1/2
11-5/8
5-9/16
11-9/16
6-5/8
149
TC-578
TC-339
3/4 x 6-3/4
*6
6-1/2
11-5/8
6-5/8
11-9/16
6-5/8
139
TC-578
TC-339
3/4 x 6-3/4
10,000 LB. WP
3-1/4
3-3/4
7-1/8
2-3/8
5-3/16
3-13/32
2-3/4
20-1/2
TC-610
TC-563
5/8 x 4-1/4
2-1/2
3-1/4
7-3/8
2-7/8
5-5/16
3-13/32
2-3/4
21-1/2
TC-610
TC-563
5/8 x 4-1/4
1-5/16
4-1/2
8-5/8
3-1/2
6-11/16
4-7/32
3-9/16
38-1/2
TC-611
TC-754
3/4 x 5-1/4
5-1/4
11-1/2
4-1/2
8-7/8
5-11/16
4-1/2
85
TC-613
TC-634
1x7
7-1/2
8-1/2
16-1/4
5-9/16
12-5/16
7-1/4
6-1/2
216
TC-1633
TC-1920
1-1/4 x10-1/2
7-5/16
2-7/8
5-13/16
3-1/2
2-7/8
23-1/2
TC-2187
TC-3376
5/8 x 3-3/4
15,000 LB. WP
2-1/2
HELP
3-1/4
(p164)
D-S
E A L
A T E
How to Order
All requirements should be stated
at the time of purchase with the
understanding that, if not otherwise specified on the order, Cooper
Cameron Valves may supply the
valve standard with respect to
materials, end connections, etc.
The following information should
be furnished:
1. Name of valve: D-Seal.
2. Quantity.
3. Size (pipe size bore size).
4. Pressure class.
5. End connection (if weld end,
specify grade and wall of pipe).
6. Trim (see page 157).
CONTACT
7. Method of operation: handwheel, bevel gear or power actuator.
8. Service conditions: type of
installation, working pressure
and temperature, lading, presence of corrosive or abrasive
conditions.
CONTENTS MENU 9. Delivery requirements.
Valve
Size
21/2"
3"
4"
6"
10"
TECHNICAL DATA
12"
www:
14"
CONTACT
16"
18"
20"
HELP
24"
RTJ
7 1/2
91/8
115/8
115/8
145/8
145/8
8
101/8
131/8
131/2
165/8
165/8
81/2
113/4
141/8
141/8
151/8
185/8
91/2
125/8
161/8
171/8
181/8
215/8
11
161/2
195/8
221/8
241/8
28
12
171/8
235/8
261/8
291/8
331/8
131/2
185/8
265/8
311/8
331/8
393/8
141/2
203/8
301/8
331/8
381/8
451/8
151/2
305/8
325/8
351/8
447/8
501/4
161/2
335/8
355/8
391/8
447/8
553/8
171/2
365/8
385/8
431/8
481/2
181/2
393/4
413/4
471/4
521/2
201/2
457/8
487/8
553/8
613/4
150
300
400
600
900
1500
150
300
400
600
900
1500
150
300
400
600
900
1500
150
300
400
600
900
1500
150
300
400
600
900
1500
150
300
400
600
900
1500
150
300
400
600
900
1500
150
300
400
600
900
1500
150
300
400
600
900
1500
150
300
400
600
900
1500
150
300
400
600
900
1500
150
300
400
600
900
1500
150
300
400
600
900
1500
2"
A
End-To-End
(in)
Class
8"
FOSTER
A L V E S
RF
7
81/2
111/2
111/2
141/2
141/2
71/2
91/2
13
13
161/2
161/2
8
111/8
14
14
15
181/2
9
12
16
17
18
211/2
101/2
157/8
191/2
22
24
273/4
111/2
161/2
231/2
26
29
323/4
13
18
261/2
31
33
39
14
193/4
30
33
38
441/2
15
30
321/2
35
401/2
491/2
16
33
351/2
39
441/2
541/2
17
36
381/2
43
48
601/2
18
39
411/2
47
52
651/2
20
45
481/2
55
61
761/2
B
Nominal
Bore
(in)
C
CL -To Bottom
(in)
D
CL -To Top
(in)
E
Handwheel
Diameter
(in)
Approx.
Weight
(lbs)
21/16
21/16
21/16
21/16
21/16
21/16
29/16
29/16
29/16
29/16
29/16
29/16
31/8
31/8
31/8
31/8
31/8
31/8
41/16
41/16
41/16
41/16
41/16
41/16
6
6
6
6
6
6
8
8
8
8
8
75/8
10
10
10
10
10
91/2
12(1)
12(1)
12(1)
12(1)
12(1)
113/8
131/4
131/4
131/4
131/4
123/4
121/2
151/4
151/4
151/4
151/4
143/4
141/4
171/4
171/4
171/4
171/4
163/4
191/4
191/4
191/4
191/4
185/8
231/4
231/4
231/4
231/4
221/2
53/4
53/4
6
6
6
6
71/4
71/4
71/2
71/2
71/2
71/2
81/4
81/4
81/2
81/2
9
9
11
11
111/4
111/4
111/2
111/2
133/8
133/8
133/8
133/8
135/8
145/8
161/2
161/2
161/2
161/2
163/4
181/4
195/8
195/8
195/8
195/8
20
221/4
227/8
227/8
227/8
227/8
233/4
263/8
25
251/2
251/2
26
26
29
271/8
275/8
275/8
285/8
285/8
321/2
301/8
303/4
303/4
317/8
317/8
331/2
341/2
341/2
37
37
403/4
411/4
411/4
441/2
441/2
181/4
181/4
181/4
181/4
185/8
185/8
227/8
227/8
227/8
227/8
231/2
231/2
26
26
26
26
263/4
263/4
30
30
30
30
311/2
311/2
42
42
42
42
445/8
49
491/4
491/4
491/4
491/4
52
541/2
62
62
62
62
641/4
67
62
62
62
62
641/4
67
713/4
713/4
713/4
713/4
747/8
77
791/2
791/2
791/2
791/2
821/2
855/8
843/8
843/8
843/8
843/8
867/8
933/4
933/4
933/4
933/4
983/8
1093/4
1093/4
1093/4
1093/4
1181/4
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
18
22
22
22
22
22
24(3)
22
22
22
22
30
24(3)
22
22
22
30
30
24(3)
22
22
30
30
24(3)
24(3)
30
30
30
24(3)
24(3)
36(3)
36
36
24(3)
24(3)
36(3)
36(3)
24(3)
24(3)
24(3)
36(3)
36(3)
24(3)
24(3)
24(3)
36(3)
36(3)
24(3)
24(3)
36(3)
36(3)
36(3)
50
75
100
100
225
225
60
100
140
140
250
250
75
150
175
175
275
350
125
200
250
325
450
675
225
375
550
675
850
1350
350
575
825
1075
1550
2450
550
875
400
1950
2600
4250
775
1250
2050
2550
3750
6500
975
2050
5925
3350
5125
9150
1150
2475
2880
4000
6350
11500
1475
3325
3750
5325
8100
2125
4850
6300
7450
11675
2750
7450
8850
12025
18850
(p165)
D-S
E A L
A T E
FOSTER
A L V E S
Trim
Code
Body &
Bonnet
Standard Service
-20 to 250F
FT-7
Carbon Steel
Mild Corrosive
and Sour Service
(H 2 S & CO2 )
-20 to 250F
FT-8
Carbon Steel
Highly Corrosive
Service
Full Stainless
-20 to 250F
FT-9
Stainless
Steel
Waterflood
Service
-20 to 250F
FT-10
MTBE Service
(less than 40%
concentration)
-20 to 250F
FT-14
Carbon Steel
Carbon Steel
Carbon Steel with
Carbon Steel with
with Electroless Electroless Nickel Plate Electroless Nickel Plate
Nickel Plate
& Filled TFE Insert
& Filled TFE Insert
MTBE Service
(greater than 40%
FT-17
concentration)
-20 to 400F
Carbon Steel
Carbon Steel
Carbon Steel with
Carbon Steel with
with Electroless Electroless Nickel Plate Electroless Nickel Plate
Nickel Plate
& Filled TFE Insert
& Filled TFE Insert
Anhydrous
Ammonia Service
-20 to 250F
FT-19
Carbon Steel
Low Temperature
Standard Service
-50 to 250F
Low Temperature
Sour Service
(H 2 S & CO2 )
-50 to 250F
CONTACT
CONTENTS MENU
Primary
Seat
Gate
Secondary
Seat
Stem
Seal
Seat
Elastomers
Stem
Bolting
Fittings
Carbon Steel
Carbon Steel with
Carbon Steel with
Fluoromyte
Viton
with Electroless Electroless Nickel Plate Electroless Nickel Plate
Lip Seals (Fluorocarbon)
Nickel Plate
& Filled TFE Insert
& Filled TFE Insert
17-4PH
Stainless
Alloy Steel
Carbon
Steel
Carbon Steel
Carbon Steel with
Carbon Steel with
Fluoromyte
Viton
with Electroless Electroless Nickel Plate Electroless Nickel Plate
Lip Seals (Fluorocarbon)
Nickel Plate
& Filled TFE Insert
& Filled TFE Insert
17-4PH
Stainless
Alloy Steel
NACE
Stainless
Steel
17-4PH
Stainless
Alloy Steel
NACE
Stainless
Steel
Nitrile
(BUNA-A)
17-4PH
Stainless
Alloy Steel
Stainless
Steel
Filled TFE
High
Fluorine
Content
Viton
17-4PH
Stainless
Alloy Steel
Carbon
Steel
Filled TFE
Virgin
TFE with
Eligiloy
Spring
17-4PH
Stainless
Alloy Steel
Carbon
Steel
Carbon Steel
Carbon Steel with
Carbon Steel with
Ethylene
with Electroless Electroless Nickel Plate Electroless Nickel Plate Propylene
Nickel Plate
& Filled TFE Insert
& Filled TFE Insert
Lip Seals
Neoprene
Alloy
Alloy Steel
Steel
NACE
Molycoat
Stainless
Steel
FT-36
Carbon Steel
Carbon Steel with
Carbon Steel with
Carbon Steel
Fluoromyte
with Electroless Electroless Nickel Plate Electroless Nickel Plate
Impact Tested
Lip Seals
Nickel Plate
& Filled TFE Insert
& Filled TFE Insert
Low Temp
Nitrile
17-4PH
Stainless
Alloy Steel
Low Temp
Stainless
Steel
FT-37
Carbon Steel
Carbon Steel
Carbon Steel with
Carbon Steel with
Fluoromyte
17-4PH
Impact Tested with Electroless Electroless Nickel Plate Electroless Nickel Plate
Epichlorohydrin
Lip Seals
Stainless
NACE
Nickel Plate
& Filled TFE Insert
& Filled TFE Insert
Alloy Steel
Low Temp
NACE
Stainless
Steel
Stainless
Steel
Fluoromyte
Viton
Lip Seals (Fluorocarbon)
Carbon Steel
Carbon Steel
Carbon Steel with
Carbon Steel with
Fluoromyte
with Internal with Electroless Electroless Nickel Plate Electroless Nickel Plate
Lip Seals
Plastic Coating
Nickel Plate
& Filled TFE Insert
& Filled TFE Insert
Geothermal Service
TECHNICAL DATA
www:
Service
Trim
Code
Body &
Bonnet
Gate
Primary
Seat
Secondary
Seat
Stem
Seal
Seat
Elastomers
Stem
Bolting
Fittings
Standard Service
-20 to 550F
FT-1
Carbon Steel
Carbon Steel
Nitrided
Carbon Steel
with Stellite 6
Hardface Molycoat
Carbon Steel
Molycoat with
Filled TFE Insert
Filled
TFE
LGarde Y267
(EPDM)
17-4PH
Stainless
Alloy Steel
Stainless
Steel
Mild Corrosive
Service
-20 to 550F
FT-2
Carbon Steel
Carbon Steel
with Stellite 6
Hardface
Molycoat
Carbon Steel
with Stellite 6
Hardface Molycoat
Carbon Steel
Molycoat with
Filled TFE Insert
Filled
TFE
LGarde Y267
(EPDM)
17-4PH
Stainless
Alloy Steel
Stainless
Steel
Mild Corrosive
Service
-20 to 550F
FT-2A
Carbon Steel
Stainless Steel
with Stellite 6
Hardface
Stainless Steel
with Stellite 6
Hardface
Stainless Steel
with Filled
TFE Insert
Filled
TFE
LGarde Y267
(EPDM)
Inconel
625
Alloy Steel
Stainless
Steel
Extreme Corrosive
Service
-20 to 550F
FT-6
Carbon Steel
with Inconel
625 Lined Bore
Stainless Steel
with Stellite 6
Hardface
Stainless Steel
with Stellite 6
Hardface
Stainless Steel
with Filled
TFE Insert
Filled
TFE
LGarde Y267
(EPDM)
17-4PH
Stainless
Alloy Steel
Stainless
Steel
Extreme Corrosive
Carbon Steel
Service
FT-6A with Inconel
-20 to 550F
625 Lined Bore
Stainless Steel
with Stellite 6
Hardface
Stainless Steel
with Stellite 6
Hardface
Stainless Steel
with Filled
TFE Insert
Filled
TFE
LGarde Y267
(EPDM)
Inconel
625
Alloy Steel
Stainless
Steel
CONTACT
(1)
Materials shown are for reference purposes only and are subject
to change. Cooper Cameron Valves reserves the right to substitute
equivalent materials, if necessary.
HELP
(p166)
C T U A T I O N
FOSTER
A T A
E
B
C
Stem Thread
Dia.
Dia.
Depth
Dia.
Size
CONTACT
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
HELP
900
1500
150
300
600
900
150
300
600
900
1500
150
300
600
900
1500
150
300
600
900
1500
150
300
600
900
1500
150
300
400
600
900
1500
150
300
600
900
150
300
400
600
900
150
300
600
150
300
600
900
150
300
600
900
150
300
300
No. of Holes
Hole Diameter
6.53
6.53
7.53
7.53
7.53
7.53
10.65
10.65
10.65
10.65
10.87
12.59
12.59
13.42
13.42
11.00
24.64
14.64
15.30
15.30
14.58
17.42
17.42
19.70
19.70
16.22
19.42
19.42
19.70
19.70
19.04
21.00
19.42
19.42
20.47
20.47
21.37
21.37
21.37
21.37
22.02
23.97
23.97
26.00
26.19
26.19
29.92
29.92
30.25
30.25
34.75
34.75
34.45
45.38
49.47
3.00
3.00
4.00
4.00
4.00
4.00
5.00
5.00
5.00
5.00
5.25
7.00
7.00
7.00
7.00
7.50
9.00
9.00
9.00
9.12
9.25
11.00
11.00
11.00
11.38
11.25
13.00
13.00
13.38
13.38
13.75
14.38
14.63
14.63
15.00
15.00
16.63
16.63
16.63
16.63
17.00
18.00
18.00
19.25
20.75
20.75
21.25
21.25
24.75
24.75
25.50
25.50
28.50
36.75
41.00
N/A
N/A
N/A
N/A
N/A
N/A
0.84
0.84
0.84
0.84
0.84
0.84
0.84
1.19
1.19
1.56
0.84
0.84
1.19
1.19
1.81
1.19
1.19
1.56
1.56
2.00
1.19
1.19
1.56
1.56
1.81
2.31
1.81
1.81
2.25
2.25
1.81
1.81
1.81
1.81
2.00
2.25
2.25
2.31
2.25
2.25
3.25
3.25
2.25
2.25
4.19
4.19
2.25
3.25
4.19
N/A
N/A
N/A
N/A
N/A
N/A
0.319
0.319
0.319
0.319
0.319
0.319
0.319
0.457
0.457
0.464
0.319
0.319
0.457
0.457
0.598
0.457
0.457
0.464
0.464
0.770
0.457
0.457
0.464
0.464
0.598
0.820
0.598
0.598
0.651
0.651
0.598
0.598
0.598
0.598
0.770
0.651
0.651
0.820
0.651
0.651
0.949
0.949
0.770
0.770
1.117
1.117
0.770
0.949
1.117
N/A
N/A
N/A
N/A
N/A
N/A
.250
.250
.250
.250
.250
.250
.250
.250
.250
.375
.250
.250
.250
.250
.375
.250
.250
.375
.375
.500
.250
.250
.375
.375
.375
.625
.375
.375
.500
.500
.375
.375
.375
.375
.500
.500
.500
.625
.500
.500
.625
.625
.500
.500
.750
.750
.500
.625
.750
3.50
3.50
3.50
3.50
3.50
3.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
5.50
5.50
5.50
4.50
4.50
5.50
5.50
6.50
5.50
5.50
5.50
5.50
6.50
5.50
5.50
5.50
5.50
6.50
10.00
5.50
5.50
6.50
6.50
5.50
5.50
6.50
6.50
6.50
6.50
6.50
10.00
6.50
6.50
11.75
11.75
6.50
6.50
11.75
14.00
6.50
11.75
11.75
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
8
4
4
4
4
4
4
4
4
4
4
4
8
4
4
8
8
4
4
8
8
4
8
8
.56
.56
.56
.56
.56
.56
.56
.56
.56
.56
.56
.56
.56
.69
.69
.69
.56
.56
.69
.69
.81
.69
.69
.69
.69
.81
.69
.69
.69
.69
.81
.69
.69
.69
.81
.81
.69
.69
.81
.81
.81
.81
.81
.69
.81
.81
.81
.81
.81
.81
.81
1.38
.81
.81
.81
4.75
4.75
4.75
4.75
4.75
4.75
5.75
5.75
5.75
5.75
5.75
5.75
5.75
7.00
7.00
7.00
5.75
5.75
7.00
7.00
8.19
7.00
7.00
7.00
7.00
8.19
7.00
7.00
7.00
7.00
8.19
11.56
7.00
7.00
8.19
8.19
7.00
7.00
8.19
8.19
8.19
8.19
8.19
11.56
8.19
8.19
13.50
13.50
8.19
8.19
13.50
16.50
8.19
13.50
13.50
2.323
2.323
2.323
2.323
2.323
2.323
2.878
2.880
2.883
2.883
2.883
2.883
2.883
4.260
4.260
4.260
2.883
2.883
4.260
4.260
5.010
4.260
4.260
4.260
4.260
5.010
4.260
4.260
4.260
4.260
5.010
6.010
3.760
3.760
5.010
5.010
3.760
3.760
5.010
5.010
5.010
5.010
5.010
6.010
5.010
5.010
7.010
7.010
5.010
5.010
7.010
8.510
5.010
7.010
7.010
.328
.328
.328
.328
.328
.328
.396
.401
.401
.401
.401
.401
.401
.156
.156
.156
.401
.401
.156
.156
.250
.156
.156
.156
.156
.250
.156
.156
.156
.156
.250
.250
.156
.156
.250
.250
.156
.156
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
1.25
1.25
1.25
1.25
1.25
1.25
1.50
1.63
1.63
1.63
1.63
1.63
1.63
2.38
2.38
2.38
1.63
1.63
2.38
2.38
3.11
2.38
2.38
2.38
2.38
3.11
2.38
2.38
2.38
2.38
3.11
5.50
2.65
2.65
3.25
3.25
2.65
2.65
3.11
3.11
3.11
3.11
3.11
5.50
3.25
3.25
4.50
4.50
3.25
3.25
4.50
7.25
3.25
4.50
4.50
Thread
Operating Data:
STUB ACME-LH
3/4"-6 STUB ACME-LH
3/4"-6 STUB ACME-LH
3/4"-6 STUB ACME-LH
3/4"-6 STUB ACME-LH
3/4"-6 STUB ACME-LH
1"-5 STUB ACME-LH
1"-5 STUB ACME-LH
1"-5 STUB ACME-LH
1"-5 STUB ACME-LH
1"-5 STUB ACME-LH
1"-5 STUB ACME-LH
1"-5 STUB ACME-LH
11/4"-5 STUB ACME-LH
11/4"-5 STUB ACME-LH
11/2"-4 ACME-2G-LH
1"-5 STUB ACME-LH
1"-5 STUB ACME-LH
11/4"-5 STUB ACME-LH
11/4"-5 STUB ACME-LH
13/4"-4 ACME-2G-LH
11/4"-5 STUB ACME-LH
11/4"-5 STUB ACME-LH
11/2"-4 ACME-2G-LH
11/2"-4 ACME-2G-LH
21/4"-.25P-.50L-ACME-2G-LH
11/4"-5 STUB ACME-LH
11/4"-5 STUB ACME-LH
11/2"-4 ACME-2G-LH
11/2"-4 ACME-2G-LH
13/4"-4 ACME-2G-LH
21/2"-.25P-.50L-ACME-2G-LH
13/4"-.20P-.40L-ACME-2G-LH
13/4"-.20P-.40L-ACME-2G-LH
2"-.25P-.50L-ACME-2G-LH
2"-.25P-.50L-ACME-2G-LH
13/4"-.20P-.40L-ACME-2G-LH
13/4"-.20P-.40L-ACME-2G-LH
13/4"-.20P-.40L-ACME-2G-LH
13/4"-.20P-.40L-ACME-2G-LH
21/4"-.25P-.50L-ACME-2G-LH
2"-.25P-.50L-ACME-2G-LH
2"-.25P-.50L-ACME-2G-LH
21/2"-.25P-.50L-ACME-2G-LH
2"-.25P-.50L-ACME-2G-LH
2"-.25P-.50L-ACME-2G-LH
23/4"-.25P-.50L-ACME-2G-LH
23/4"-.25P-.50L-ACME-2G-LH
23/4"-.25P-.50L-ACME-2G-LH
21/4"-.25P-.50L-ACME-2G-LH
31/4"-.33P-.67L-ACME-2G-LH
31/4"-.33P-.67L-ACME-2G-LH
21/4"-.25P-.50L-ACME-2G-LH
23/4"-.25P-.50L-ACME-2G-LH
31/4"-.33P-.67L-ACME-2G-LH
3/4"-6
Dia.
(p167)
T
12
32
4
11
20
30
7
18
35
55
200
12
30
75
115
260
20
50
120
180
451
30
85
206
320
1040
320
115
195
300
525
1765
96
250
648
972
125
320
400
600
1225
180
469
1125
200
575
1432
2148
325
855
2565
3850
432
2025
3118
C T U A T I O N
FOSTER
A T A
CONTACT
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
2
2
2
2
2
3
3
3
3
4
4
4
4
4
6
6
6
6
6
8
8
8
8
8
10
10
10
10
10
12
12
12
12
12
12
14
14
14
14
16
16
16
16
16
18
18
18
20
20
20
20
24
24
24
24
28
36
40
(1)
HELP
150
300
600
900
1500
150
300
600
900
150
300
600
900
1500
150
300
600
900
1500
150
300
600
900
1500
150
300
600
900
1500
150
300
400
600
900
1500
150
300
600
900
150
300
400
600
900
150
300
600
150
300
600
900
150
300
600
900
150
300
300
Stem
Thrust
499
1307
2613
4095
6824
898
2350
4149
6223
1110
2906
6132
9198
16665
2000
5250
10905
16358
31350
3150
8250
16668
26358
48895
4559
11938
24825
38325
72158
6230
16311
23540
35310
56960
115300
8423
22055
47750
71625
10720
28067
35615
53422
85300
13210
34586
73625
16185
42369
88240
132360
22715
59472
126903
190355
30000
124850
154240
Torque
Stroke
Ft-Lbs
2
6
12
19
32
4
11
20
30
7
18
37
56
100
12
30
76
114
260
19
50
118
184
451
32
83
206
320
1040
43
114
195
293
525
1765
96
250
648
972
122
320
404
606
1229
179
469
1128
220
575
1432
2148
327
857
2568
3848
432
2025
3118
3.00
3.00
3.00
3.00
3.00
4.00
4.00
4.00
4.00
5.00
5.00
5.00
5.00
5.25
7.00
7.00
7.00
7.00
7.50
9.00
9.00
9.00
9.12
9.25
11.00
11.00
11.00
11.38
11.25
13.00
13.00
13.38
13.38
13.75
14.38
14.63
14.63
15.00
15.00
16.63
16.63
16.63
16.63
17.00
18.63
18.63
19.25
20.75
20.75
21.25
21.25
24.75
24.75
25.50
25.50
28.50
36.75
41.00
Stem
Pitch
Stem
Lead
0.167
0.167
0.167
0.167
0.167
0.167
0.167
0.167
0.167
0.200
0.200
0.200
0.200
0.200
0.200
0.200
0.200
0.200
0.250
0.200
0.200
0.200
0.200
0.250
0.200
0.200
0.250
0.250
0.250
0.200
0.200
0.250
0.250
0.250
0.250
0.200
0.200
0.250
0.250
0.200
0.200
0.200
0.200
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.333
0.333
0.250
0.250
0.333
0.167
0.167
0.167
0.167
0.167
0.167
0.167
0.167
0.167
0.200
0.200
0.200
0.200
0.200
0.200
0.200
0.200
0.200
0.250
0.200
0.200
0.200
0.200
0.250
0.200
0.200
0.250
0.250
0.500
0.200
0.200
0.250
0.250
0.250
0.500
0.400
0.400
0.500
0.500
0.400
0.400
0.400
0.400
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.667
0.667
0.500
0.500
0.667
Stem Thread
No.
Turns
3/4"-6
STUB ACME-LH
STUB ACME-LH
3/4"-6 STUB ACME-LH
3/4"-6 STUB ACME-LH
3/4"-6 STUB ACME-LH
3/4"-6 STUB ACME-LH
3/4"-6 STUB ACME-LH
3/4"-6 STUB ACME-LH
3/4"-6 STUB ACME-LH
1"-5 STUB ACME-LH
1"-5 STUB ACME-LH
1"-5 STUB ACME-LH
1"-5 STUB ACME-LH
1"-5 STUB ACME-LH
1"-5 STUB ACME-LH
1"-5 STUB ACME-LH
11/4"-5 STUB ACME-LH
11/4"-5 STUB ACME-LH
11/2"-4NA-2G-LH
1"-5 STUB ACME-LH
1"-5 STUB ACME-LH
11/4"-5 STUB ACME-LH
11/4"-5 STUB ACME-LH
13/4"-4NA-2G-LH
11/4"-5 STUB ACME-LH
11/4"-5 STUB ACME-LH
11/2"-4NA-2G-LH
11/2"-4NA-2G-LH
21/4"-.25P-.50L-2G-LH
11/4"-5 STUB ACME-LH
11/4"-5 STUB ACME-LH
11/2"-4NA-2G-LH
11/2"-4NA-2G-LH
13/4"-4NA-2G-LH
21/2"-.25P-.50L-2G-LH
13/4"-.20P-.40L-2G-LH
13/4"-.20P-.40L-2G-LH
2"-.25P-.50L-2G-LH
2"-.25P-.50L-2G-LH
13/4"-.20P-.40L-2G-LH
13/4"-.20P-.40L-2G-LH
13/4"-.20P-.40L-2G-LH
13/4"-.20P-.40L-2G-LH
21/4"-.25P-.50L-2G-LH
2"-.25P-.50L-2G-LH
2"-.25P-.50L-2G-LH
21/2"-.25P-.50L-2G-LH
2"-.25P-.50L-2G-LH
2"-.25P-.50L-2G-LH
23/4"-.25P-.50L-2G-LH
23/4"-.25P-.50L-2G-LH
21/4"-.25P-.50L-2G-LH
21/4"-.25P-.50L-2G-LH
31/4"-.33P-.67L-2G-LH
31/4"-.33P-.67L-2G-LH
21/4"-.25P-.50L-2G-LH
23/4"-.25P-.50L-2G-LH
31/4"-.33P-.67L-2G-LH
(2)
Rim
Pull
10.0
10
6
18.0
10
15
18.0
10
29
18.0
14
33
18.0
14
55
24.0 10.25 9
24.0 10.25 26
24.0
14
34
24.0
14
51
25.0
14
12
25.0
14
31
25.0
17
52
25.0
17
79
26.3
17
141
35.0
17
17
35.0
17
42
35.0
22
83
35.0
22
124
30.0 N/A N/A
45.0
17
27
45.0
17
71
45.0
26
109
45.6
26
170
37.0 N/A N/A
55.0
26
30
55.0
26
77
44.0
30
165
45.5
30
256
22.5 N/A N/A
65.0
26
40
65.0
26
105
53.5
30
156
53.5
30
234
55.0
36
350
28.8 N/A N/A
36.6
26
89
36.6
26
231
30.0
36
432
30.0
36
648
41.6
26
113
41.6
26
295
41.6
36
269
41.6
36
404
34.0 N/A N/A
37.3
36
119
37.3
36
313
38.5 N/A N/A
41.5
36
147
41.5
36
383
42.5
42
818
42.5
42 1227
49.5
36
218
49.5
36
571
38.2
48 1284
38.2
48 1924
57.0 N/A N/A
73.5 N/A N/A
61.5 N/A N/A
3/4"-6
Spur gears will reduce input rim pull but the number of turns will
increase, spur gear ratio available varies with BGO used.
HW
Dia.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
B320-10
B320-10
B320-20
B320-10
B320-10
B320-10
B320-10
B320-40
B320-10
B320-10
B320-20
B320-20
B320-40
B320-10
B320-10
B320-20
B320-20
B320-40
B320-50
B320-30
B320-30
B320-40
B320-40
B320-30
B320-30
B320-40
B320-40
B320-40
B320-40
B320-40
B320-50
B320-40
B320-40
B320-70
B320-70
B320-40
B320-40
B320-70
B320-80
B320-40
B320-70
B320-70
Main Spur
Gear Gear
HW
Dia.
Rim Trq.
No.
Pull @BGO Turns
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
3
3
4
3
3
3
3
4
3
3
4
4
6
3
3
4
4
4
6
4
4
4
6
4
4
4
4
4
4
4
6
4
4
6
6
4
4
8
8
4
6
8
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
36
24
24
24
24
24
24
24
24
36
24
24
36
24
24
36
36
36
36
36
36
36
36
36
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
28
42
72
7
19
44
68
125
12
31
57
89
193
16
42
54
81
146
218
27
69
180
180
34
89
112
168
228
50
130
139
61
160
177
265
61
159
238
356
80
250
289
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(2)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(1)
N/A
N/A
(2)
N/A
N/A
N/A
(1)
N/A
N/A
(1)
(1)
(1)
(1)
(1)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
28
42
72
7
19
44
68
125
12
31
57
89
193
16
42
54
81
146
327
27
69
180
180
34
89
112
168
341
50
130
209
61
160
265
398
91
238
357
534
120
375
433
(p168)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
105
105
120
135
135
135
137
148
165
165
176
182
135
195
195
214
214
220
173
146
146
120
180
166
166
166
166
136
149
149
231
166
166
255
255
198
198
306
306
228
441
492
O W
-R-S
E A L
VA
AT E
W-K-M
LV E S
Parts Detail
CONTACT
CONTENTS MENU
TECHNICAL DATA
How to Order
4. Pressure class.
5. End connection (if weld end, specify grade and wall of pipe).
6. Trim (see page 161).
7. Method of operation: handwheel, bevel gear or power actuator.
8. Service conditions: type of installation, working pressure
and temperature, lading, presence of corrosive or abrasive
conditions.
9. Delivery requirements.
www:
CONTACT
HELP
(p169)
O W
-R-S
E A L
VA
AT E
W-K-M
LV E S
General Trim Chart for W-K-M Pow-R-Seal Gate Valves (6" - 36")
CONTACT
Service
Trim
Code
Body &
Bonnet
Seat
Stem Seal
Stem
Bolting
Fittings
Standard
-20 to 250F
T-11
Carbon Steel
Carbon Steel,
Nickel Plated,
TFE Insert
TFE
Chevron
Seals
Low Alloy
Steel
Nickel Plated
Alloy Steel
Carbon
Steel
MTBE
-20 to 250F
T-102
Carbon Steel
Carbon Steel,
Nickel Plated,
TFE Insert
TFE
Chevron
Seals
Low Alloy
Steel
Nickel Plated
Alloy Steel
Carbon
Steel
Sour, Mildly
Corrosive, MTBE
-20 to 250F
T-24
Carbon Steel
Carbon Steel,
Nickel Plated,
TFE Insert
Fluoromyte
Lip
Seals
Low Alloy
Steel
Nickel Plated
Alloy Steel,
NACE
Stainless
Steel
T-10
Carbon Steel
Internal Plastic
Coating
Carbon Steel,
Nickel Plated
TFE Insert
Fluoromyte
Lip
Seals
Low Alloy
Steel
Nickel Plated
Alloy Steel,
NACE
Stainless
Steel
High Temperature
-20 to 550F
T-30
Carbon Steel
Carbon Steel
HF-6 hard face
40% Filled
TFE
17-4PH, NACE
Alloy Steel,
NACE
Stainless
Steel
High Temperature
-20 to 1000F*
T-31
Low Alloy
Steel
Low Alloy
Steel, HF-6
hard face
Flexible
Graphite
400 Series
Stainless Steel
Alloy Steel
Stainless
Steel
Low Temperature
Sour, MTBE
-50 to 250F*
T37
Carbon Steel
Charpy Impact
Tested
Carbon Steel,
Nickel Plated,
TFE Insert
Fluoromyte
Lip
Seals
Low Alloy
Steel, Charpy
Impact Tested,
Nickel Plated
Alloy Steel,
Impact
Tested,
NACE
Stainless
Steel
Notes:
1) CCV reserves the right to substitute equivalent Materials.
2) Contact your local representative or the Missouri City Plant for
detail trim charts or applications not listed.
CONTENTS MENU
3) MTBE labeled trims are suitable for Methyl Tertiary Butyl Ethylene
in concentrations up to 100%.
4) Sour denotes trims which conform to NACE MR-01-75.
600
900
1500
2500
2"
2"
2"
2"
3"
3"
3"
3"
TECHNICAL DATA
www:
CONTACT
4"
4"
4"
4"
6"
6"
6"
6"
6"
8"
8"
8"
10
10"
10"
12"
12"
12"
14"
14"
14"
14"
16"
16"
16"
18"
18"
20"
20"
20"
24"
24"
24"
30"
30"
36"
36"
HELP
(p170)
O W
-R-S
E A L
VA
AT E
W-K-M
LV E S
CONTACT
Class 900
H
Wt., Lb.
Size
N*
111/2
21/16
413/16
173/4
14
33/16
615/16
237/8
12
20
180
144
155
17
41/8
85/8
27
14
20
345
259
245
FE
CONTENTS MENU
TECHNICAL DATA
www:
16
90
FW
72
84
N*
141/2
21/16
51/16
173/4
12
15
33/16
75/16
237/8
18
41/8
91/16 281/2
Wt., Lb
FE
WE
FW
16
150
72
105
12
20
265
193
247
18
20
515
390
417
Class 1500
Class 2500
Size
CONTACT
12
WE
Size
N*
Wt., Lb.
FE
WE
FW
Size
N*
Wt., Lb
FE
WE
FW
141/2 21/16
51/16 173/4
12
16
150
72
105
12
12
220
105
154
181/2 33/16
75/16 237/8
12
20
295
215
242
223/4 29/16
81/8
257/8
14
18
450
328
370
211/2
91/16
261/4
91/4
295/8
24
23
720
547
583
41/8
281/2
18
20
530
403
325
31/16
HELP
(p171)
O W
-R-S
E A L
VA
AT E
W-K-M
LV E S
CONTACT
461/4
24
3011/16
29
571/4
561/4
24
3611/16
20
631/4
641/4
24
223/4
733/8
745/8
123/8 223/4
733/8
745/8
157/8
121/2
451/4
161/2
16
10
18
10
12
30
12
12
30
CONTENTS MENU
TECHNICAL DATA
G
G
(HWO) (BGO)
Size
FE
WE
F W
FE
WE
F W
114
472
397
400
500
445
470
267/8
37
146
853
751
805
903
845
895
32
4411/16
45
180
1345
1200
1273
1475
1380
1448
421/8
30
5111/16
40
239
1950
1670
1880
451/2
30
5111/16
40
239
1950
1670
1880
451/2
www:
N*
N*
(HWO) (BGO)
Class 400
CONTACT
G
G
(HWO) (BGO)
H
Dia.
461/4
24
3011/16
29
571/4
561/4
24
3611/16
195/8
643/4
661/8
30
223/4
731/4
745/8
123/8 223/4
731/4
745/8
Size
191/2
121/2
451/4
231/2
153/8
10
261/2
10
12
30
12
12
30
Wt., Lb (HWO)
N*
N*
(HWO) (BGO)
Wt., Lb (BGO)
WE
F W
FE
WE
F W
114
490
430
480
533
473
523
267/8
37
146
950
650
685
875
660
742
32
453/16
34
203
1400
1255
1305
1578
1348
1473
421/8
30
5111/16
40
239
1975
1745
1915
2045
1690
1860
451/2
30
5111/16
40
239
1975
1745
1915
2045
1690
1860
451/2
HELP
FE
(p172)
O W
-R-S
E A L
AT E
VA
W-K-M
LV E S
Class 600
G
G
(HWO) (BGO)
H
Dia.
461/4
24
3011/16
29
571/4
561/4
24
3611/16
193/4
647/8
661/8
30
12
23
733/8
745/8
123/8
23
733/8
745/8
Size
22
125/8
451/4
26
151/2
10
31
10
12
33
12
33
N*
N*
(HWO) (BGO)
FE
WE
F W
FE
WE
F W
114
595
495
545
695
575
635
267/8
37
146
1028
730
865
1075
895
990
32
453/16
34
203
1735
1370
1505
1895
1585
1835
421/8
30
5111/16
40
239
3030
2360
2680
2525
2250
2360
451/2
30
5111/16
40
239
3030
2360
2680
2525
2250
2360
451/2
Class 900
CONTACT
CONTENTS MENU
G
G
(HWO) (BGO)
H
Dia.
461/4
24
303/4
29
571/4
561/4
24
363/4
201/8
647/8
661/8
30
231/2
733/4
123/8 231/2
733/4
Size
24
127/8
451/4
29
153/4
10
33
10
12
38
12
12
38
N*
N*
(HWO) (BGO)
FE
WE
F W
FE
WE
F W
114
743
577
625
805
565
680
267/8
37
146
1272
1040
1180
1329
1180
1238
32
451/4
34
203
2250
1930
2085
2315
1875
2185
421/8
30
565/8
40
318
3392
2725
2860
3600
2880
3276
451/2
565/8
40
318
3392
2725
2860
3600
2880
3276
451/2
Class 1500
Size
H
Dia.
30
327/8
30
3811/16
91/4 225/16
30
30
TECHNICAL DATA
www:
323/4
10
39
12
G
G
(HWO) (BGO)
461/4
461/4
683/8
683/8
FE
WE
F W
FE
WE
F W
519/16
567/16
CONTACT
N*
N*
(HWO) (BGO)
Class 2500
Size
36
G
G
(HWO) (BGO)
H
Dia.
417/8
30
2915/16
FE
WE
F W
FE
WE
F W
41
41
30
353/16
683/8
683/8
30
43
77
77
30
56 5/8
10
50
81/2
12
56
101/8 261/16
HELP
N*
N*
(HWO) (BGO)
(p173)
O W
-R-S
E A L
VA
AT E
W-K-M
LV E S
CONTACT
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
Class 400
14
30
131/4
251/4
657/8
16
33
15
18
36
17
20
Wt., Lb.
N*
FE
WE
FW
N*
131/4
251/4
693/4
531/2
177
FE
WE
FW
177
14
321/2
167
16
351/2
15
167
8613/16 655/16
190
18
381/2
17
190
39
211
20
211
24
45
223/4
26
49
251/4 451/8
28
30
60
291/2
53
36
68
31
42
53
1153/4
863/8
24
481/2
122
931/2
26
223/4
417/8
1131/2
877/8
122
931/2
28
55
30
60
285/8
36
74
53
Class 600
Class 900
Size
14
35
16
39
Wt., Lb.
N*
FE
WE
Size
FW
N*
Wt., Lb.
FE
WE
FW
177
14
15
167
16
174
665/8
190
18
981/8 737/8
211
20
18
43
17
315/8
861/2
20
47
183/4
36
24
55
24
61
22
26
57
251/4 457/8
26
28
61
265/8
485/8
28
30
65
285/8
53
30
36
82
36
122
931/2
1373/4
1021/2
HELP
Wt., Lb.
Size
(p174)
O W
-R-S
E A L
AT E
VA
W-K-M
LV E S
Actuation Data
Valve
Stem
Working Thread
Class
Pressure
Size
(psig)
(in)
Size
(in)
CONTACT
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
Stem
Thread
Pitch
(in)
Stem
Thread
Lead*
(in)
Rec.
Opr.
Thrust
(lbf)
Rec.
Opr.
Torque
(ft-lbf)
Max.
Opr.
Thrust
(lbf)
Max.
Opr.
Torque
(ft-lbf)
Stem
Travel
(in)
Turns
To
Open
Valve
300
750
1.50
0.250
0.250
6626
82
8625
106
21711
267
7.19
29
600
1500
1.50
0.250
0.250
13252
163
17249
212
21711
267
7.19
29
900
2250
1.50
0.250
0.250
19878
245
25874
318
32594
401
7.19
29
300
750
1.75
0.250
0.250
10705
149
13190
183
27423
381
9.12
36
600
1500
1.75
0.250
0.250
21410
298
26379
367
27423
381
9.12
36
900
2250
1.75
0.250
0.250
32115
447
39569
550
42377
590
9.12
36
10
300
750
2.25
0.333
0.333
16462
296
20081
362
49745
896
11.31
34
10
600
1500
2.25
0.333
0.333
32924
593
40162
723
49745
896
11.31
34
10
900
2250
2.25
0.333
0.333
49386
889
60244
1085
76635
1380
11.31
34
12
300
750
2.25
0.333
0.333
21911
395
28416
512
67648
1218
13.38
40
12
300
750
2.25
0.333
0.333
23180
417
27147
489
67648
1218
13.38
40
12
600
1500
2.25
0.333
0.333
43822
789
56832
1023
67648
1218
13.38
40
12
600
1500
2.25
0.333
0.333
46360
835
54293
978
67648
1218
13.38
40
12
900
2250
2.25
0.333
0.333
65732
1184
85248
1535
86920
1565
13.38
40
12
900
2250
2.25
0.333
0.333
68683
1237
82297
1482
86920
1565
13.38
40
14
300
750
2.00
0.250
0.500
24833
425
32363
554
101825
1938
14.75
29.50
14
600
1500
2.00
0.250
0.500
49665
851
64726
1108
101825
1938
14.75
29.50
14
900
2250
2.25
0.333
0.333
70273
1132
104213
1679
127093
2276
14.75
44.29
16
300
750
2.50
0.400
0.800
32214
760
40107
947
141016
3699
16.69
20.86
16
600
1500
2.50
0.400
0.800
64428
1521
80215
1894
141016
3699
16.69
20.86
16
900
2250
2.50
0.400
0.800
88591
2091
151629
3579
176271
4161
16.69
20.86
18
300
750
2.50
0.400
0.800
40019
945
49898
1178
141016
3329
18.94
23.67
18
600
1500
2.50
0.400
0.800
80038
1889
99796
2358
141016
3329
18.94
23.67
18
900
2250
2.50
0.400
0.400
128042
2670
167251
3488
239891
5003
19.88
49.70
20
300
750
2.50
0.400
0.800
40019
945
49898
1178
141016
3329
18.94
23.67
20
300
750
2.75
0.400
0.800
48394
1217
62517
1572
180611
4541
21.13
26.41
20
600
1500
2.75
0.400
0.800
96789
2434
125034
3144
180611
4541
21.13
26.41
20
900
2250
3.00
0.400
0.400
147724
3105
187552
3943
239476
5034
21.13
52.81
22
300
750
3.00
0.400
0.800
61315
1626
74872
1986
225696
5986
23.25
29.06
22
600
1500
3.00
0.400
0.800
122630
3253
149745
3972
225696
5986
23.25
29.06
24
300
750
3.00
0.400
0.800
69328
1839
94567
2508
225696
5986
25.25
31.56
24
600
1500
3.00
.0.400
0.800
138656
3678
189134
5016
225696
5986
25.25
31.56
26
300
750
3.25
0.400
0.800
84717
2364
107963
3013
275770
7697
27.50
34.38
26
600
1500
3.25
0.400
0.800
169433
4729
215927
6027
275770
7697
27.50
34.38
30
300
750
3.50
0.400
0.800
111047
3254
145134
4253
331086
9702
31.75
39.69
30
600
1500
3.50
0.400
0.800
222094
6509
290267
8506
331086
9702
31.75
39.69
36
300
720
4.50
0.400
0.400
154484
4539
192348
5651
621389
18256
38.00
95.00
36
600
1500
4.50
0.400
0.400
321842
9455
400726
11773
621389
18256
38.00
95.00
1. Recommended operating thrust and torque are the loads required to close the valve with full differential pressure across the
gate. The operator should be sized for these values.
2. Maximum allowance thrust and torque values are the maximum allowable loads for these valves.
3. WhenBlock and Bleed or Double Block and Bleed service is specified, operators should be sized for these values.
4. Unless otherwise stated, handwheel rim pull for manual and motor operators shall not exceed 120lbs.
5. Al torque and thrust values are based on maximum working pressure at ambient temperature.
6. Multiple lead threads may have been supplied in special cases. Verify thread leads before adapting operators.
7. Denotes seats which have oversize bores. The 12" 300-600 Class valves have 12.50" bores. 12" 900 Class valve has a 12.38"
bore. These are normally used for Geothermal Service.
HELP
(p175)
O W
-R-S
E A L
VA
AT E
W-K-M
LV E S
CONTACT
CONTENTS MENU
TECHNICAL DATA
www:
6"
3/9C
E1A
F14 11/2"-.250P-.250L
3.955
2.50
3.945
1.03
.178
8"
3/9C
E1A
F14 13/4"-.250P-.250L
3.955
2.50
3.945
1.03
.178
10"
3/9C
E1A
F16 21/4"-.333P-.333L
5.230
3.12
5.220
1.50
.230
12"
3/6C
E1A
F16 21/4"-.333P-.333L 11.50 24.88 13.38 26.06 25.69 45.44 8.27 6.496 4-.81
5.230
3.12
5.220
1.50
.230
12"
9C
E1A
F16 21/4"-.333P-.333L 11.34 24.75 13.38 26.06 25.69 45.56 8.27 6.496 4-.81
5.230
3.12
5.220
1.50
.230
CONTACT
HELP
(p176)
DM
A T E
A L V E S
L A S S E S
400,
Parts Detail
DEMCO
600
2"
21/2"
3"
4"
6"
1071
1091
1081
1073
1093
1083
1075
1095
1085
1077
1097
1087
1079
1099
1089
1061
1063
1065
1069
4" x 3"
3934
3935
Screwed End LP
CONTACT
CONTENTS MENU
2
3
4
11/2"
2"
21/2"
3"
4"
6"
3938
1072
1092
1082
1074
1094
1084
1076
1096
1086
1078
1098
1088
1080
1100
1090
1062
1064
1066
1068
1070
Screwed End valves furnished for line pipe unless otherwise specified.
TBG and UPTBG 10 round threads on 1-1/2"; UPTBG 8 round on 2" and
2-1/2" valves; TBG 10 round on 3"; TBG 8 round on 4"; LP only on 6".
Weld End valves furnished for Sch. 40 pipe. See page 179 for more information.
Grooved End valves furnished for Sch. 80 pipe.
Raised Face flanges furnished unless otherwise specified.
TECHNICAL DATA
3939
3942
3943
3939
3942
3943
3944
3945
www:
Ref.
CONTACT
HELP
Description
1
2
3
4
5
6
7
Handle
Pin Stem
Lube Fitting
Back Up Ring
Stem Seal
Stem
Bonnet
8
9
10
11
12
13
Seat
Gate
Material
Ductile Iron
Spring Steel
Steel
Chrome Leather
As specified (Buna N or Viton)
As specified, see page 169
Class 400: all sizes except
2-1/2" FP, ASTM A395 Ductile Iron
All others, ASTM A216 Carbon Steel
ASTM A193 Gr B7 Steel
A194 Gr 2H Stl
As specified (Buna N or Viton)
Class 400: all except weld end and
size 2-1/2" FP, ASTM A395 Ductile Iron
All others, ASTM A216 Carbon Steel
or equivalent
As specified, see page 169
As specified, see page 169
(p177)
DM
A T E
A L V E S
400,
L A S S E S
600
DEMCO
How to Order (example: 2" 600, line pipe, std trim: 1072-0422110)
XXXX
End Connection
Body
Config.
Stem
Material
Gate
Material
Seat
Inserts
Seat
Elastomer
Coating*
Configuration
End Connection
Code
LP
TBG
UPTBG
Screwed
0
1
2
Weld, Sch. 40
Material
Code
Screwed
Buna N
Weld
Monel
Viton
Grooved
Alum. Bronze
Hypalon
Flanged
316 SS
400 RTJ
400 RF
600 RTJ
600 RF
Flanged
Code
Grooved Sch. 80
CONTACT
Material
Code
Material
0
1
2
3
Material
Code
303 SS
316 SS
Code
Duct. Iron
(Steel 4" Bore Only)
Monel
Alum. Bronze
316 SS
Material
Code
Uncoated
DEMCO 10
DEMCO 11
DEMCO 12
CONTENTS MENU
TECHNICAL DATA
Dimension
A
Nom.
Size
www:
Screwed,
Grooved &
WeldFull Port
B (Open)
C (Seat Bore)
F
Flange
Ring
Bolts
Number
(No.,
(RTJ)
Size)
ScrewedRegular
Port
FlangedRF
FlangedRTJ
Full Port
Regular
Port
Full Port
Regular
Port
Full Port
Regular
Port
Flange
Diameter
73/4
111/2
115/8
83/4
73/4
15/8
11
91/2
61/2
8 - 5/8
R23
13
131/8
105/8
21/2
125/8
71/2
8 - 3/4
R26
14
141/8
113/8
83/4
125/8
11
81/4
8 - 3/4
R31
113/8
141/4
125/8
121/2
12 - 7/8
R45
Class 400
CONTACT
87/8
2"
21/2"
10
3"
101/4
121/2
4"
117/8
6"
151/2
15
137/8
191/2
195/8
191/4
137/8
24
141/4
15/8
91/2
15/8
11
91/2
61/2
8 - 5/8
R23
125/8
71/2
8 - 3/4
R26
125/8
11
81/4
8 - 3/4
R31
141/4
125/8
103/4
8 - 7/8
R37
24
141/4
14
12 -1
R45
24
161/2
12-11/8
R49
Class 600
HELP
11/2"
73/4
73/4
2"
87/8
73/4
111/2
115/8
83/4
73/4
13
131/8
105/8
21/2
14
141/8
113/8
83/4
17
171/8
137/8
113/8
22
221/8
191/4
137/8
26
261/8
191/4
21/2"
10
3"
101/4
121/2
4"
117/8
6"
151/2
8"
15
3
4
6
(p178)
DM
A T E
A L V E S
L A S S E S
900,
Parts Detail
DEMCO
1500
2"
21/2"
3"
4"
3947
3951
3953
3955
3947
3951
3953
3955
3999
3947
3951
3953
3955
3999
6"
Base Part Numbers, Class 1500, Full Port (4" see page 172)
(3705 psi WP 5575 psi test)
Valve Size (in)/Type
Screwed and
Grooved End1
Weld End2
Flanged End
(RF or RTJ)3
CONTACT
1
2"
21/2"
3"
3948
3952
3957
Screwed End valves furnished for line pipe unless otherwise specified.
UPTBG 8 round threads on 2" and 2 1/2" valves; TBG 10 round on 3";
TBG 8 round on 4"; Grooved Ends in Class 900 only.
Weld End valves furnished for Sch. 40 and Sch. 80 Class 900; Sch. 40,
Sch. 80 and Sch. 160 Class 1500. See page 179 for more information.
Raised Face flanges furnished unless otherwise specified.
Parts List Class 900 (2"- 6") and 1500 (2"- 3")
CONTENTS MENU
TECHNICAL DATA
www:
Ref.
Component
1
2
3
4
5
6
7
Handle
Pin Stem
Lube Fitting
Back Up Ring
Stem Seal
Stem
Bonnet
9
10
11
12
13
14
15
Seat
Gate
Screw Seal
Relief Fitting
CONTACT
Material
Ductile Iron
Spring Steel
Steel
Chrome Leather
As specified (Buna N or Viton)
As specified, see page 171
ASTM A487 CL 4N Carbon Steel or
equivalent.
2" valves, AISI 4140 Normalized Steel
ASTM A193 GR B7 Steel
(6" valve AISI 4140)
A194 GR 2H Stl*
As specified (Buna N or Viton)
ASTM A487 CL 4N Carbon Steel or
equivalent.
2" screwed and weld end, AISI 1029
Normalized Steel
As specified, see page 171
As specified, see page 171
Buna N
Steel
HELP
(p179)
DM
A T E
A L V E S
900,
L A S S E S
1500
DEMCO
End Connection
Body
Config.
Stem
Material
Gate
Material
Seat
Inserts
Seat
Elastomer
Coating*
Code
Material
Code
Buna N
Material
Code
LP
Screwed
TBG
UPTBG
Sch. 40
Weld
Sch. 80
Sch. 160
Grooved Sch. 801
900 RTJ
900 RF
Flanged
1500 RTJ
1500 RF
CONTACT
0
1
2
0
1
5
0
4
5
6
7
Code
Screwed
Monel
Viton
Weld
Alum. Bronze
Hypalon
Grooved
316 SS
Flanged
7
Material
Material
Code
303 SS
316 SS
Code
Duct. Iron
(Steel 4" Bore Only)
Monel
Alum. Bronze
316 SS
Material
Code
Uncoated
DEMCO 10
DEMCO 11
DEMCO 12
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
Nom.
Size
Screwed,
Grooved &
WeldFull Port
B (Open)
C (Seat Bore)
FlangedRF
FlangedRTJ
Full Port
Full Port
Full Port
Flange
Diameter
Flange Bolts
(No.,
Size)
Ring
Number
(RTJ)
Class 900
2"
141/2
14 5/8
97/8
141/2
81/2
8 - 7/ 8
R24
21/2"
93/4
161/2
165/8
117/8
21/2
19
95/8
8 -1
R27
3"
11
15
151/8
12 3/4
19
91/2
8 - 7/ 8
R31
4"
13
18
181/8
15
23
111/2
8 -11/8
R37
6"
20
24
241/8
191/4
24
15
12 -11/8
R45
2"
141/2
145/8
97/8
141/2
81/2
8 - 7/ 8
R24
21/2"
93/4
161/2
165/8
117/8
21/2
19
95/8
8 -1
R27
3"
11
181/2
185/8
12 3/4
19
101/2
8 -11/8
R35
Class 1500
HELP
(p180)
DM
A T E
A L V E S
1500,
L A S S
DEMCO
4"
Parts Detail
CONTACT
End Connection
Body
Config.
Stem
Material
Gate
Material
Seat
Inserts
Seat
Elastomer
Coating*
CONTENTS MENU
Configuration
End Connection
Code
LP
Screwed
TBG
Sch. 40
Weld
Sch. 80
Sch. 160
Flanged 1500 RTJ
1500 RF
TECHNICAL DATA
www:
0
1
0
1
5
6
7
Material
Code
Buna N
Weld
Monel
Viton
Flanged
Alum. Bronze
Hypalon
316 SS
Code
303 SS
316 SS
Material
Code
Material
Screwed End1
Weld End2
Flanged End
(RF or RTJ)3
Material
Screwed
CONTACT
Code
Code
Material
Steel
Uncoated
Monel
DEMCO 10
Alum. Bronze
DEMCO 11
316 SS
DEMCO 12
3010
Screwed End valves furnished for line pipe unless otherwise specified.
TBG 8 round threads on 4".
Weld End valves furnished for Sch. 40, Sch. 80 and Sch. 160 Class 1500.
See page 179 for more information.
Raised face flanges furnished unless otherwise specified.
HELP
Code
(p181)
DM
A T E
A L V E S
1500,
L A S S
4"
DEMCO
Component
1
3
5
CONTACT
CONTENTS MENU
Material
Hub Assembly
Lube Fitting
Stem Seal Assy.
Includes Brz. bushing
Stem
7
8
9
10
11
12
Bonnet
Body Stud (4)
Body Stud Nut (4)
Bonnet Seal
Body*
Seat
13
Gate
14
16
18
19
20
21
22
23
24
Screw Seal
Lock Handle
Stem Screw
Screw Housing
Secondary Seal
Retainer
Pin, Lock Handle
Bonnet Stud (2)
Bonnet Stud Nut (2)
TECHNICAL DATA
A
Nom.
Size
www:
B (Open)
C (Seat Bore)
Screwed
& WeldFull Port
FlangedRF
FlangedRTJ
Full Port
Full Port
Full Port
Flange
Diameter
Flange
Bolts
(No.,
Size)
Ring
Number
(RTJ)
13
211/2
215/8
211/4
23
121/4
8-11/4
R39
4"
CONTACT
HELP
(p182)
DM
A T E
A L V E S
2000,
Parts Detail
3000,
5000
DEMCO
WP
2"
21/2" x 2"
21/2"
3"
4"
1026
1029
11920
1115
1042
1051
11921
1045
1054
11922
1048
1057
11923
1023
1033
1036
1039
2"
21/2"
3"
4"
1027
1030
1043
1052
1046
1055
1049
1058
1024
1034
1037
1040
CONTACT
Base Part Numbers, 3000 WP 6000 psi Test Regular Port
Valve Size (in)
21/2"
Weld End
x 2"
4" x 3"
5" x 4"
1113
1111
1114
CONTENTS MENU
Base Part Numbers, 5000 WP 10,000 psi Test
Valve Size (in)
21/2"
2"
Screwed End1
Weld End2
Flanged End
(RTJ)4
TECHNICAL DATA
3"
4" x 3
1028
1031
1109
1047
1056
1110
1025
1038
x 2"
www:
CONTACT
HELP
3
4
(p183)
DM
A T E
A L V E S
2000,
3000,
5000
WP
DEMCO
How to Order (example: 2" 5000, Line Pipe, std trim: 1028-0422110)
XXXX
End Connection
Body
Config.
Stem
Material
Gate
Material
Seat
Inserts
Seat
Elastomer
Coating*
End Connection
Code
LP
Screwed
TBG
UPTBG
Sch. 80
Weld
XXH
Sch. 160
Grooved Sch. 80
2000 RTJ
Flanged 3000 RTJ
5000 RTJ
0
1
2
1
2
5
0
0
1
2
Configuration
Material
Code
Material
Code
Screwed
Buna N
Weld
Monel
Viton
Grooved
Alum. Bronze
Hypalon
Flanged
316 SS
8
Material
Material
Material
CONTACT
Code
Code
Code
Duct. Iron
(Steel 4" Bore Only)
Monel
303 SS
Alum. Bronze
316 SS
316 SS
Code
Uncoated
DEMCO 10
DEMCO 11
DEMCO 12
Parts List
Ref.
CONTENTS MENU
TECHNICAL DATA
www:
Component
Material
1
2
4
6
7
8
9
10
11
12
13
15
Lube Fitting
Hub Assembly
Lock Handle
Stem Screw
Stem Screw Seal
Screw Housing
Stem
Secondary Seal
Retainer
Stem Seal Assembly
Lock Screw
Coupling (2" bore only)
16
Bonnet
Ref.
Steel
Steel or Ductile Iron
Steel
Steel
Buna N
Steel
As specified, see How to Order
Buna N
Steel
As specified (Buna N or Viton)
Steel (2" bore only)
2000/3000 WP: A216 WCB Steel
5000 WP: A487 4NSteel
2" bore: AISI 1029, or A105 Steel
Other sizes: ASTM A487 Steel
(CL 4N or 2Q)
CONTACT
Nom.
Size
Screwed,
Grooved &
WeldFull Port
21/2"
93/4
9
3"
11
4"
13
21/2"
93/4
9
3"
11
4"
13
11
5"
13
5000 psi WP, 10,000 psi Test
2"
9
21/2"
9
3"
11
11
HELP
21
22
23
Seat
Pin, Lock Handle
Bonnet Stud
(2-1/2" 4" bore)
Bonnet Stud Nut (2)
(2-1/2" 4" bore)
Body Stud (4)
(2-1/2" 4" bore)
Body Stud Nut (4)
(2-1/2" 4" bore)
25
26
B (Open)
Weld
Regular
Port
Material
Index Pin
Bonnet Seal
Gate
Body*
24
Component
17
18
19
20
C (Seat Bore)
F
Flange
Ring
Bolts
Number
(No.(RTJ)
Size)
FlangedRTJ
Full Port
Regular
Port
Full Port
Regular
Port
Full Port
Regular
Port
Flange
Diameter
115/8
165/8
141/8
163/8
13
17
18
211/4
13
2
21/2
3
4
14
19
19
23
14
61/2
71/2
81/4
103/4
8 -5/8
8 -3/4
8 -3/4
8 -7/8
R23
R26
R31
R37
115/8
165/8
141/8
163/8
13
17
18
211/4
13
18
211/4
2
21/2
3
4
3
4
14
19
19
23
14
19
23
81/2
95/8
91/2
111/2
8 -7/8
8-1
8 -7/8
8 -11/8
R24
R27
R31
R37
121/8
155/8
13
18
13
18
14
19
14
19
81/2
101/2
8 -7/8
8 -11/8
R24
R35
(p184)
4 ",
E M C O
5 ",
6"- 5000
DEMCO
WP
CONTACT
A
CONTENTS MENU
Dimensional Data (inches) Both Bonnet Designs
F
A
B
C
D
Flange
(End to (Open (Seat (Handle
Bolts RTJ Ring
Flange
End) Height) Bore) Diameter) Diameter (No., Number
Size)
Nom.
Size
TECHNICAL DATA
www:
4"
Screwed/
Weld End
13
245/8
223/4
4"
Flanged
18
245/8
223/4
121/4
8-11/4
R39
5" x 4"
Weld End
13
245/8
223/4
(1)
6" x 4"
Weld End
13
245/8
223/4
(1)
16
247/8
5.12
20
31
5.12
23
51000
Casing
Thread
CONTACT
5 3000
4000, 5000
Casing
16
Thread
(1)
Test Pressure
Test Pressure for 4" x 4" and 5" x 4" 4-bolt design valves is
7500 psi. 12-bolt bonnet design valves are shell tested to 10,000
psi. All 5 casing thread valves shell tested to x2 working
pressure
HELP
(p185)
4 ",
E M C O
5 ",
6"- 5000
WP
DEMCO
How to Order (example: 5" x 4", 4 bolt, weld XXH, std trim: 7421-2522110)
XXXX
Size
4 Bolt
12 Bolt
4"x 3"
1110
4"x 4"
7420
17263
5"x 4"
7421
17264
6"x 4"
17265
End Connection
CONTACT
Weld2
Flanged
CONTENTS MENU
CONTACT
End Connection
Body
Config.
Stem
Material
Gate
Material
Seat
Inserts
Seat
Elastomer
Coating*
Code
Material
Material
Code
Buna N
Weld
Monel
Viton
Flanged
Alum. Bronze
Hypalon
316 SS
Code
0
1
1
2
5
2
Material
Material
Code
Component
Code
Material
Steel
Uncoated
316 SS
Monel
DEMCO 10
316 SS
DEMCO 11
DEMCO 12
Material
Steel
Steel or Ductile Iron
Clear Acrylic
Ductile Iron
Steel
Steel
Buna N
Steel
As specified, see How to Order
Buna N
Steel
As specified (Buna N or Viton)
Teflon/Phenolic
303 SS
ASTM A487 steel (CL 4N or 2Q)
As specified (Buna N or Viton)
As specified, see How to Order
ASTM A487 steel (CL 4N or 2Q)
As specified, see How to Order
ASTM A193, GR B7 Steel
A194 Gr 2H Steel
AISI 4140 Steel
ASTM A193 GR B7
AISI 4140-4145 Steel
ASTM A194 GR 2H
HELP
Code
303 SS
Code
Screwed
13
14
16
18
19
20
21
23
24
25
25
26
26
1
2
3
4
5
6
7
8
9
10
11
12
www:
Ref.
TECHNICAL DATA
Configuration
LP
TBG
Sch. 80
XXH
Sch. 160
5000 RTJ1
Screwed
(p186)
E N E R A L
E C H N I C A L
DEMCO
N F O R M A T I O N
Size (in.)
11/2"
2" x
11/2"
900
1500
2000
3000
5000
FL*
S, G, W*
FL*
S, G, W*
FL*
S, G, W*
FL*
S, G, W*
FL*
S, G, W*
FL*
S, G, W*
FL*
20
20
40
2"
24
42
26
44
48
100
48
100
48
70
53
21/2" x 2"
48
21/2"
48
70
50
74
87
170
87
170
74
3" x 2"
32
34
65
3"
58
90
60
96
95
160
113
205
95
100
61
110
53
61
141
87
170
131
113
175
241
140
4" x 3"
72
74
145
113
140
4"
93
98
176
140
230
162
320
140
200
162
265
210
330
5" x 4"
162
210
5"
208
317
317
6" x 4"
270
255
6"
300
411
310
428
325
540
8" x 6"
590
CONTACT
CONTENTS MENU
600
S, G, W*
* S = Screwed End
G = Grooved End
W = Butt Weld End
FL = Flanged End
1
2
3
included
Weight shown is for the 4 bolt design, the 12 bolt design is 246lbs
Weight shown is for a 5 1000# OMGV with casing threads.
Casing thread only (weight will be the same for a 5 4000# valve)
TECHNICAL DATA
www:
CONTACT
HELP
(p187)
E N E R A L
E C H N I C A L
Plastic Coatings
CONTACT
ID
OD
Sch. 40
Sch. 80
Sch. 160
XXH
1.610
2.067
2.469
3.068
4.026
6.065
7.981
1.500
1.939
2.323
2.900
3.826
4.813
5.761
7.625
1.687
2.125
2.624
3.438
4.313
5.187
6.813
1.503
1.771
2.300
3.152
4.063
1.900
2.375
2.875
3.500
4.500
5.563
6.625
8.625
DEMCO
N F O R M A T I O N
Pressure Ratings
Demco Gate Valves are designed for the maximum working
pressures and test pressures tabulated below:
Pressure Ratings
TECHNICAL DATA
www:
Class
400
Class
600
Class
900
990 WP
1500 Test
1480 WP
2225 Test
2220 WP
3350 Test
3705 WP 2000 WP
5575 Test 4000 Test
3000
WP
3000 WP 5000 WP
6000 Test 10,000 Test
Pressure Ratings
Seat Elastomers
Buna N (nitrile) is the basic seat elastomer. It is excellent for
petroleum oil and gases, fuel oils and alcohols from 10 F to
+200 F. Hypalon is optionally offered compounded for maximum chemical resistance. Particularly suited for oxidizing
acids, it resists hydrocarbon oils and fuels from 10 F to
+250 F. Viton is highly resistant to mineral acids and hydrocarbons and resists moderate concentrations of hydrogen sulfide.
Serviceable from 10 F to +400 F. (Not suitable for steam).
Size
Sch. 40
Sch. 80
Sch. 160
XXH
11/2"
2"
21/2"
3"
4"
5"
6"
8"
1340
1210
1620
1460
1300
1110
1030
2430
2220
2590
2370
2130
1970
1970
1790
4300
3950
3930
3830
3730
3650
3620
5970
6590
5880
5150
4650
Ordering Information
Give size, pressure class and end connection. Specify pressure
class of flanged ends and raised face or RTJ. For threaded ends,
give line pipe, TBG (non upset tubing) or UPTBG (external
upset tubing). For weld or grooved ends, give schedule of
mating pipe.
HELP
5000*
WP
2000
WP
* 4"-5000, 5" & 6" regular port-5000 valves of the 4 bolt design are tested at
7,500 psi; exception special order.
Testing
CONTACT
Class
1500
(p188)
DM
7500
A T E
DEMCO
A L V E S
Parts Detail
No.
Component
Material
Handwheel
Ductile Iron
Carbon Steel
Alloy Steel
ASTM B18.3
4
5
Lock Screw
Skt. Hd.
Cap Screw
Gate Clip
Stem Packing
ASTM A536
Grade 65-45-12
ANSI 1213
Stem
Bonnet
8
9
10
Bonnet Stud
Bonnet Nut
Bonnet Seal
26
11
Body
17
12
Seat Insert
3
23
1
24
18
2
14
22
18A
19
25
Stainless Steel
Elastomeric
ANSI 302
Buna-N
ANSI 410
Stainless Steel
HRC 22 Max
ASTM A487
Alloy Steel
Grade 4 Class C
Alloy Steel ASTM A193 Grade B7M
Alloy Steel
ASTM A194 Grade 2H
Elastomeric
Buna-N
ASTM A487
Alloy Steel
Grade 4 Class C
Stainless Steel/
ANSI 410/Buna-N
Elastomeric
Alloy Steel
ANSI 4130
Elastomeric
Buna-N
Alloy Steel
ANSI 4142
Elastomeric
Buna-N
CONTACT
21
20
13
Gate
14 Grease Seal
15
Wear Ring
16 Wear Ring Seal
Packing
17
Adapter
Stem Screw
18
Assy.
18*
Bearing
19 Bonnet Cap
20 Grease Seal
Packing
21
Retainer
22 Hex Cap Screw
23 Stem Protector
8
9
6
4
7
12
10
16
13
CONTENTS MENU
11
15
Bronze
Carbon Steel
ANSI 1022
Steel
Carbon Steel
Elastomeric
Roller Thrust
ANSI 1022
Buna-N
Carbon Steel
ANSI 1022
Alloy Steel
Plastic
SD-016418
TECHNICAL DATA
24
Stem Cap
Ductile Iron
25 Grease Fitting
26 Grease Vent
www:
Description
Commercial
Commercial
How to Order* (Part number example: Std 5" Butt Weld 24994-2572110)
X X X X X
CONTACT
Base Part
Number
X X
End
Connection*
Body
Configuration
Stem
Material
Gate
Material
10,000 RTJ
Weld
410 SS
Steel
CS/410SS/Buna-N/Buna-N
11
Schedule XXH
Flanged
17- 4 SS
410 SS
410SS/410SS/Buna-N/Buna-N
12
17- 4 SS
Duplex SS 9
Duplex SS 9
Description
2"
3"
4"
6 5"
5"
HELP
N/A
(p189)
DM
7500
A T E
DEMCO
A L V E S
CONTACT
C
D
A
CONTENTS MENU
2"
Description
4"
5"
6"
Flange
Weld
Flange
Weld
Flange
Weld
Flange
Weld
Flange
9.00
18.38
13.00
24.38
16.00
26.38
17.88
29.00
17.88
N/A
13.04
13.04
24.60
24.60
31.00
31.00
31.81
31.81
31.81
N/A
2.6
3.94
4.69
5.31
3.90
6.2
5.00
7.03
5.00
N/A
6.38
6.38
10.50
10.50
11.75
11.75
14.88
14.88
14.88
N/A
13.88
13.88
22.81
22.81
20.00
20.00
26.75
26.75
26.75
N/A
Weight (lb)
76
124
256
372
310*
475*
506
761
506
N/A
1.97
1.97
2.98
2.98
3.97
3.97
5.17
5.17
5.17
N/A
2.075
N/A
3.075
N/A
4.075
N/A
5.135
N/A
Option
3.00
N/A
4.40
N/A
5.81
N/A
7.25
N/A
Option
TECHNICAL DATA
www:
CONTACT
3"
Weld
*Estimated weights.
HELP
(p190)
DT
E R I E S
A T E
DEMCO
A L V E S
Base Part
Number
Size
(in)
1*
CONTACT
2
21/2
End
Configuration
Body
Configuration
Stem
Material
Gate
Material
Seat
Ring
Seat/Seals
Body/
Bonnet
Flanged
316 SS 8
316 SS
Aluminum
6
Bronze
ANSI
Class
Base
Part No.
600 RTJ
600
17275
600 RF
900
17276
900 RTJ
1500
14044
900 RF
Viton/ Viton
600
24726
1500 RTJ
P-10/Hytrel
900
24727
1500 RF
1500
24753
P-10/90 Duro
Buna-N P.C.
Threaded
600
24728
API LP
900
24729
UPTBG
1500
24754
600
24730
900
24731
1500
24732
600
24733
Stainless
Steel
Threaded
Flanged
316 SS 8
Buna N/Buna N 1
(Peroxide
Cured Buna)
40
80
CONTENTS MENU
120
900
24734
1500
24735
130
180
21
60
90
B (OPEN)
70
110
100
20
TECHNICAL DATA
10
160
www:
CONTACT
Dimensional Data
Size/
Class
1600
900/500
2" 600
2"
900/1500
21/2" 600
21/2"
900/1500
3" 600
3" 900
3" 1500
4" 600
4" 900
4" 1500
HELP
A
THDD
A
RF
A
RTJ
6.75
10
10
11.0
1.06
5.0
3.0
8.50
11.5
11.63 14.63
2.06
14.50
5.0
8.50
14.5
14.63 14.63
2.06
14.50
5.25
30
8.75
13.0
13.13 16.71
2.56
14.75
6.13
8.75
16.5
16.63 16.71
2.56
14.75
6.38
9.69
14.0
15.0
18.5
17.0
18.0
21.5
14.13
15.13
18.63
17.13
18.13
21.63
18.00
18.00
18.82
22.25
22.25
22.54
3.13
3.13
3.13
4.06
4.06
4.06
14.75
14.75
18.00
23.00
23.00
23.00
6.81
6.94
7.15
9.00
9.13
9.41
SEAT SEAL
50
SEAT SPRING
SEAT SEAL
50
P-10
(Seat/seal option 6)
Seat spring and seal
part of seat assembly
(p191)
E R I E S
DT
A T E
DEMCO
A L V E S
Description
21/2"
2"
Material/Option Specifications
3"
4"
900
900
600 1500 600 1500 600 900 1500 600 900 1500
10
20
CONTACT
CONTENTS MENU
BodyAPI LP
BodyUPTBG
(6)
Aluminum Bronze
ASTM B148 Alloy 955
N/A
N/A
N/A
X
CF
BodyANSI RF
BodyANSI RTJ
(6)
Aluminum Bronze
ASTM B148 Alloy 955
BodyAPI LP
BodyUPTBG
(8)
N/A
N/A
CF
BodyANSI RF
BodyANSI RTJ
(8)
CF
CF
CF
CF
CF
CF
CF
CF
CF
(6)
Aluminum Bronze
ASTM B148 Alloy 955
(8)
CF
CF
CF
CF
CF
CF
CF
CF
CF
CONTACT
21
Stem Bushing
( f / SS Bonnet)
Bronze
30
GateElastomer Seat
GateP-10 Seat
40
Stem
(8)
316 SS
(1)
(2)
(4)
50
Seat Assembly
Bonnet
60
www:
(6)
TECHNICAL DATA
Handle
70
Stem Packing
Retainer
316 SS
80
Cap
Steel
90
100
PH 15-7 Mo
110
Cap Screw
Alloy Steel
120
Lube Fitting
Steel
130
Relief Fitting
Steel
160
Body Seal
180
Handle Seal
(1)or(6)
(2)
Viton, 90 Durometer
(4)
Teflon/Elgiloy
Buna-N
* X = Available; CF = Consult Factory; N/A = Not Available. For 1" size, consult factory.
Part number reference for material option is shown in ( ) description column if applicable.
PRINT
Working Pressure/ Test Pressure Data
End Connection
Material
Bronze
Threaded
Stainless Steel
Flanged
HELP
Class 600
Class 900
Class 1500
Bronze
Stainless Steel
(p192)
E R I E S
DB
A T E
DEMCO
A L V E S
CONTACT
CONTENTS MENU
Base Part
Number
Size
(in)
TECHNICAL DATA
Part No.
End
Connection
Body
Configuration
Stem
Material
Gate
Material
600 RTJ 2
600 RF
6x6
19108
900 RF
www:
Aluminum
Bronze
ASTM B148
Alloy 955
ASTM A479
Type XM-19
Stainless
Steel
900 RTJ 4
18993
Flanged
Class 600
6x4
Buna-N
Viton
Buna-N, 90 Duro
Peroxide Cured
9*
1500 RTJ 6
8x6
19977
1500 RF 7
Class 900
CONTACT
6x4
18756
6x6
19163
8x6
19785
(Except 6 x 6 1500)
Aluminum Bronze
ASTM B148 Alloy 953
(Except 6 x 6 1500)
316 Stainless Steel
ASTM A351 CF8M
Class 1500
6x4
19791
(6 x 6 1500 only)
6x6
18418
8*
9*
HELP
(p193)
DB
E R I E S
A T E
DEMCO
A L V E S
CONTACT
CONTENTS MENU
Class 600
6"x 6" 8" x 6"
6" x 4"
6" x 4"
Class 900
6" x 6" 8" x 6"
Class 1500
6" x 4" 6" x 6"
Wt. Lbs.
270
400
570
350
540
775
540
610
FlangedRF
FlangedRTJ
22
221/8
22
221/8
26
261/8
24
241/8
24
241/8
29
291/8
273/4
28
273/4
28
(Open)
135/8
191/8
191/8
1415/16
34
34
215/16
34
(Seat Bore)
141/4
24
24
23
20
20
23
24
43/16
51/2
51/2
43/8
57/8
57/8
411/16
61/8
14
12 -1
R45
161/2
15
12 -11/8
R45
181/2
151/2
12 -13/8
R49
12 -13/8
R46
151/2
12 -13/8
R46
TECHNICAL DATA
(Flange Diameter)
Flange Bolts (No.-Size)
Ring Number (RTJ)
14
12 -1
R45
15
12 -11/8
R45
12 -11/8
R49
Parts List
www:
CONTACT
22
Handle (Ductile)
23
24
10
Bonnet Seal*
11
Body*
15
12
Seat Assembly*
16
17
18
19
Housing (Steel)
20
Secondary Seal*
13
Gate*
14
Handwheel (Ductile)
15
21
Retainer (Steel)
16
22
18
23
19
24
HELP
Bonnet*
Stem Seal*
20
Secondary Seal*
25
Stem*
21
Retainer (Steel)
26
*See How to Order table for materials not shown (Body, bonnet, seat insert, seat and seals).
Class 600(4); 6 x 4 900(8); 6 x 4 1500 (10); 6 x 6 900/1500 & 8 x 6 900 (12).
(p194)
D Y N A C E N T R I C H I G H P E R F O R M A N C E B U T T E R F LY VA LV E S
W-K-M
How to Order Example: std wafer carbon steel 3" Class 150 with handle: 03-A5110-02-S02-11/HL
X
A5
CONTACT
Size
Inches
CONTENTS MENU
www:
Trim
Group
3"
03
Class
Material
Style
4"
04
1=150
1= CS
0 = Wafer
6"
TECHNICAL DATA
Body
Group
06
3= 300
3 = CS21
08
10"
10
4 = CS/ENC
12"
12
5 = LCC
14
16"
16
18"
18
20"
20
24"
24
SS Disc
17-4 Stem
1= Lug
8"
14"
6= 600
2 = SS
CS Disc*
17- 4 Stem
CONTACT
Seal
Group
01
02
SS Disc
Ni-Cr 5
Stem
03
Ni-Cu 6
Disc &
Stem
04
SS Disc
316 SS
Stem2
05
SS Disc
HF-6 O/L7
17-4 Stem
06
TFE VEE
11
High Temp
Graphitized
13
Grafoil
14
TFE
S01
RTFE
S02
SS/ RTFE
3F023
NI-Cr 5 Alloy
(UNS No.
6625) / RTFE
F03
316 SS
M01
Actuation
Bare Stem
00
Handle
HL
Handwheel
Worm Gear
WG
Chainwheel
Worm Gear
CH
Ni-Cr 5 Alloy
(UNS No.
M03
6625)
SS Disc
HF-6 O/L7 07
Ni-Cr Stem5
Packing
Group 4
3 Standard
HELP
(p195)
D Y N A C E N T R I C H I G H P E R F O R M A N C E B U T T E R F LY VA LV E S
W-K-M
High Temperature
DynaCentric valves for high temperature service are equipped
with a modified 316 stainless steel seat and insert (M01), and
316 stainless steel stem bushings with high temperature seals.
This seat/seal combination is rated up to 800F in carbon steel
bodies. Ni-Cr Alloy (UNS No. 6625) seats (M03) and stainless
steel bodies can be utilized up to 1000F. Leakage rates for
metal seated valves are within the service limits of ANSI/FCI
70-2 Class V (See page 198 for details). DynaCentric valves
furnished with this seat perform well in steam, hot oil and heat
transfer fluids. Valves for higher temperatures can also be
provided on request.
Vacuum Service
The drop-tight sealing capabilities of DynaCentric valves
make them an excellent selection for vacuum service. S01,
S02, and F02 seat-seal codes are suitable for vacuum service
to 20 microns absolute. Inverted packing or purged stuffing
box configuration is available on request.
CONTACT
CONTENTS MENU
Steam Service
DynaCentric valves are ideally suited for applications in service
steam. Reinforced TFE seats (S02) with high temperature packing will handle steam to 100 psig saturation pressure. When fitted with 316 stainless steel seats with reinforced TFE inserts
(F02), the DynaCentric valve is suitable for steam to 250 psig
saturation pressures. The combination of rotary operation,
streamlined flow and positive shut-off can result in years of
maintenance-free service without the seizures on cool-down,
flashing or stem leakage associated with conventional gate or
globe valves.
TECHNICAL DATA
www:
CONTACT
HELP
(p196)
D Y N A C E N T R I C H I G H P E R F O R M A N C E B U T T E R F LY VA LV E S
W-K-M
3"12" Class 150, 3"10" Class 300, 3" 8" Class 600 DynaCentric Valves
(Wafer style shown,
lug style available)
11
9
18
10
14
21
23
20
19
7
15
4
8
16
17
22
12
2
CONTACT
13
Item
CONTENTS MENU
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
BODY
TECHNICAL DATA
www:
Body
Seat Retainer
Seat Retainer Screw
Stem/Disc Spring
Stop Pin
Stop Pin Plug
Stem Bearing
Nameplate
Gland Retainer
Gland Retainer Stud
Gland Retainer Nut
Body Gasket
Disc
Carbon Steel
Stainless Steel
A516 Gr 70
A516 Gr 70
A193 Gr B7
A351 Gr CF8M
A276 Type 316
18-8 SS
18-8 SS
316 SS
316 SS
Teflon/316 SS
18-8 SS
Stainless Steel
18-8 SS
18-8 SS
See Note (2)
A351 Gr CF8M
A564 Type 630,
H1150 + H1150
A564 Type 630,
H1150 + H1150
316 SS
Carbon Steel
316 SS
316 SS
316 SS
See Note (1)
See Note (3)
Carbon Steel
TFE/Steel
Carbon Steel
14. Stem
CONTACT
TRIM
SEAL
PACKING
A516 Gr 70
A516 Gr 70
Carbon Steel
Note (2): Standard valves do not require body gaskets. FO2, fire tested
and high temperature, MO1/MO3, valves are equipped with
composite fiber body gaskets.
Note (3): Packing sets consist of the following:
TFE VEE
High temperature, graphitized
Grafoil
Note (4): 1996 combined as one part
HELP
Carbon Steel
(H2S)
(p197)
D Y N A C E N T R I C H I G H P E R F O R M A N C E B U T T E R F LY VA LV E S
W-K-M
14"24" Class 150, 12" 24" Class 300, 10" 12" Class 600 DynaCentric Valves
(Lug style shown,
wafer style available)
10
23
25
22
6
20
17
16
21
18
19
24
14
2
1
17
16
3
CONTACT
4
12
11
13
Item
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
CONTENTS MENU
BODY
TECHNICAL DATA
www:
Body
Seat Retainer
Seat Retainer Screw
Stem/Disc Spring
Stop Pin
Stem Bearing
Nameplate
Gland Retainer
Gland Retainer Stud
Gland Retainer Nut
Bottom Cover Plate
Bottom Cover Gasket
Bottom Cover Bolt
Body Gasket
Disc
Carbon Steel
Stainless Steel
A216 Gr WCC
A516 Gr 70
A193 Gr B7
A351 Gr CF8M
A276 Type 316
18-8 SS
18-8 SS
316 SS
Teflon/316 SS
18-8 SS
Stainless Steel
18-8 SS
18-8 SS
Stainless Steel
Composite Fiber
18-8 SS
See Note (2)
A351 Gr CF8M
A564 Type 630,
H1150 + H1150
A564 Type 630,
H1150 + H1150
316 SS
Carbon Steel
316 SS
316 SS
316 SS
See Note (1)
See Note (3)
Teflon/Steel
Carbon Steel
Carbon Steel
A193 Gr B7
A216 Gr WCC
16. Stem
CONTACT
17. Stem Pins
18/19. Disc Spacer/Bearing(4)
20. Stem Key
21. Stem Retainer Pins
22. Packing Spacer
23. Gland Ring
24. Seat
25. Packing Set
TRIM
SEAL
PACKING
Carbon Steel
Note (2): Standard valves do not require body gaskets. FO2 fire tested,
fire safe and high temperature, MO1/MO3 valves are equipped
with composite fiber body gaskets.
Note (3): Packing sets consist of the following:
TFE VEE
High temperature, graphitized
Grafoil
Note (4): 1996 combined as one part
Hard Chrome Plated on FO2, MO1 and MO3.
Electroless Nickel Plated.
HELP
Carbon Steel
(H2S)
(p198)
D Y N A C E N T R I C H I G H P E R F O R M A N C E B U T T E R F LY VA LV E S
W-K-M
Seal
Code
Seat
Material
S01
TFE
6 (VI)
Seats are virgin TFE. Use where lading contamination from glass
or other fillers is not desirable, such as in food service. Available in
Class 150 valves only. Temperature range is 50F to +400F. Drop tight.
S02
RTFE
6 (VI)
Seat material is TFE reinforced with inert materials for use at elevated
temperatures and pressures. Same chemical resistance as virgin TFE
except slightly affected by hot alkaline solutions. Suitable for saturated
steam to 100 psig. Temperature range is 50F to +500F. Drop tight.
F02
SS/RTFE
6 (VI)
F03
Ni-Cr Alloy
(UNS No. 6625) /
RTFE
6 (VI)
Seat consists of Ni-Cr Alloy (UNS No. 6625) with a reinforced TFE insert.
Recommended trim for fire-tested applications and for steam service
to 250 psi saturations. Temperature range is 50F to +500F. Drop tight.
M01
316 SS
Recommended trim for saturated stem above 250 PSI, hot oils and
gases, and temperatures to 750F. Pressure/temperature range is same
as body rating. Meets ANSI/FCI 70-2.
M03
Ni-Cr Alloy
(UNS No. 6625)
Service Application
CONTACT
CONTENTS MENU
*Standard leakage rate of metal seated valves is less than .005 ml/PSI/NPS.
TECHNICAL DATA
Pressure-Temperature Limitations
Seat ratings are based on differential pressures with the disc in
the fully closed position and refer to seat only. Body pressure/
temperature ratings appear on page 191.
www:
CONTACT
HELP
(p199)
D Y N A C E N T R I C H I G H P E R F O R M A N C E B U T T E R F LY VA LV E S
W-K-M
Class 150
CS
316 SS
Class 300
CS
316 SS
285
275
740
720
1480
1440
260
230
240
235
675
655
620
560
1350
1315
400
500
600
200
170
140
195
170
140
635
600
550
515
480
450
650
700
750
125
110
95
125
110
95
535
535
505
800
850
900
80
80
65
50
950
1000
35
20
-20 to
100
200
300
CONTACT
CONTENTS MENU
Class 600
CS
316 SS
Size (in)
Class 300
Class 600
285
650
650
1240
1120
285
325
650
285
325
650
1270
1200
1095
1025
955
900
285
325
650
10
125
325
650
12
125
325
650
445
430
425
1075
1065
1010
890
870
855
14
125
325
16
125
325
410
420
420
415
845
835
830
18
125
325
20
125
325
24
125
325
385
350
775
700
TECHNICAL DATA
www:
DP Max.316 SS Stems
Class 150
CONTACT
HELP
(p200)
D Y N A C E N T R I C H I G H P E R F O R M A N C E B U T T E R F LY VA LV E S
W-K-M
Q L = CV
CONTACT
SG
DP
CV =
DP
SG
W = 2.1C V
DP(P1 + P2)
CV
W(1 + 0.0007 TS )
QG
DP x P1
S GTR
QG = 1360 CV
TECHNICAL DATA
(1 + 0.0007 TS )
S GTR
DP x P1
1360
SGTR
P1
QG
1360 CV
Cavitation
DynaCentric valves, because of their inherently high flow
capacities, have a greater tendency to cavitate at high pressure
drops. Cavitation occurs in liquids if the static pressure of the
flowing liquid decreases to a value less than the fluid under
pressure. This phenomenon can create accelerated wear and
deterioration of valves and piping as well as annoying noise and
vibration problems. To avoid cavitation in piping, the following
formula should be employed:
www:
CONTACT
DPmax =
1.5 1
1+
CV R = CV R
d2
D2
890
( )
CV
d
Where:
CV = sizing coefficient determined by standard
calculations
d = nominal valve size, inches
D = line size, inches
C VR = corrected flow coefficient for valve between
reducers
Reducers
When valves are mounted between pipe reducers, a loss in
valve capacity occurs with an additional pressure drop across
the system due to contractions and sudden enlargements. This
R=
HELP
DP(P1 + P2)
W = 2.1C V
CONTENTS MENU
=
=
=
=
=
=
=
=
=
=
=
DP(P1 + P2)
2.1
For gas service:
DP =
DP(P1 + P2)
CV =
CV =
Cv
P1
P2
DP
QG
QL
SG
TR
TS
W
Pv
W
2.1
( )
QL
DP = S G
Where:
(p201)
D Y N A C E N T R I C H I G H P E R F O R M A N C E B U T T E R F LY VA LV E S
W-K-M
Valve
Size
20
30
40
50
60
70
80
90
14
31
54
81
115
144
169
180
31
66
117
176
250
312
367
400
85
180
317
476
677
846
995
1058
174
371
654
981
1395
1744
2049
2180
10
300
638
1125
1688
2401
3001
3526
3751
12
440
936
1651
2477
3523
4403
5174
5504
14
523
1110
1959
2939
4180
5225
6139
6531
16
659
1401
2473
3709
5276
6594
7748
8243
18
886
1883
3323
4985
7089
20
1066
2266
3998
5998
24
1554
3302
5828
CONTACT
Typical Characteristic Curve
CONTENTS MENU
TECHNICAL DATA
www:
Valve
Size
20
30
40
50
60
70
80
90
14
31
54
81
115
144
169
180
31
66
117
176
250
312
367
400
85
180
317
476
677
846
995
1058
174
371
654
981
1395
1744
2049
2180
10
268
570
1005
1508
2145
2681
3150
3351
12
399
849
1498
2247
3196
3995
4693
4993
14
428
910
1606
2409
3426
4282
5032
5353
16
609
1295
2285
3428
4876
6094
7161
7618
18
848
1730
2983
4504
6303
7594
8379
8855
24
1290
2629
4534
6847
CONTACT
Series A5600, Class 600
Valve
Size
20
30
40
50
60
70
80
90
14
31
54
81
115
144
169
180
23
50
88
132
188
234
275
293
67
141
249
374
532
665
781
831
155
330
583
874
1243
1554
1826
1942
10
241
512
904
1356
1929
2411
2833
3014
12
336
714
1260
1890
2688
3360
3948
4200
HELP
(p202)
DEMCO
D Y N A C E N T R I C H I G H P E R F O R M A N C E B U T T E R F LY VA LV E S
The Torque Values shown in these tables are net required operating torques for actuator sizing.
An appropriate safety factor is included for normal wet operating torque.
CONTACT
CONTENTS MENU
10
12
14
16
18
20
24
0-50psi
155
348
728
1125
2154
3291
4277
6334
8129
11655
15770
100psi
190
395
660
1290
2430
3790
5050
7459
9533
13556
18540
200psi
250
490
1110
1800
2990
4790
6610
9740
12340
17297
24080
285psi
300
570
1330
1900
3460
5640
7930
11670
14726
20477
28790
300psi
315
590
1370
1950
3550
5790
8180
12010
15147
21038
29620
400psi
380
680
1630
2280
4100
6800
9720
14281
17955
24780
35160
500psi
445
780
1880
2610
4660
7800
11270
16551
20762
28821
40700
600psi
610
875
2140
2940
5220
8800
12820
18821
23570
32262
46240
700psi
575
970
2400
3270
5780
9800
14380
21092
26377
36003
51780
740psi
600
1020
2500
3400
6000
10200
15000
22000
27500
37500
54000
10
12
14
16
18
20
24
TECHNICAL DATA
www:
CONTACT
0-50psi
155
348
728
1125
2154
3291
4277
6334
8129
11655
15770
100psi
200
419
911
1364
2563
4013
5380
7947
10131
14371
19714
200psi
291
561
1276
1841
3381
5458
7586
11174
14134
19743
27803
285psi
368
681
1587
2247
4077
6686
9462
13917
17536
24309
34308
300psi
381
702
1642
2319
4200
6903
9793
14401
18137
25114
35491
400psi
472
844
2007
2796
5018
8348
11999
17628
22140
30486
43379
500psi
563
986
2373
3274
5836
9793
14205
20855
26143
35858
51268
600psi
653
1128
2738
3751
6654
11237
16411
24082
30146
41230
59156
700psi
744
1289
3104
4229
7473
12582
18618
27309
34149
46601
67045
740psi
780
1326
3250
4420
7800
13260
19500
28800
35750
48750
70200
HELP
(p203)
D Y N A C E N T R I C H I G H P E R F O R M A N C E B U T T E R F LY VA LV E S
W-K-M
The Torque Values shown in these tables are net required operating torques for actuator sizing.
An appropriate safety factor is included for normal wet operating torque.
FO/MO seats upstream - Valve torque (in.lb.)
CONTACT
CONTENTS MENU
10
12
14
16
18
20
24
0-50psi
333
609
1389
2710
4422
6547
7728
9709
13116
18395
25623
100psi
366
694
1578
3035
5043
7595
8956
11218
15432
21289
29746
200psi
431
863
1957
3729
6286
9689
11412
14235
20063
27079
37991
285psi
487
1006
2278
4307
7343
11470
13500
16800
24000
32000
45000
300psi
497
1032
2335
4409
7530
11784
13868
17253
24695
32868
46237
400psi
562
1201
2714
5089
8774
13878
16325
20270
29326
38658
54482
500psi
528
1370
3092
5789
10016
15973
18781
23288
33958
44447
62728
600psi
693
1539
3470
5448
11259
18068
21237
26305
38589
50237
70974
700psi
759
1707
3849
7128
12503
20162
23693
29323
43221
56026
79219
740psi
785
1775
4000
7400
13000
21000
24675
30530
48074
58342
82515
800psi
824
1876
4227
7808
13746
22257
16
18
20
900psi
890
2045
4605
8488
14989
24351
1000psi
955
2214
4954
9167
16232
28446
1100psi
1021
2383
5382
9847
17476
28541
1200psi
1086
2552
5741
10527
18719
30635
1300psi
1152
2721
6119
11206
19962
32730
1400psi
1218
2890
8497
11888
21205
34824
1480psi
1270
3025
8800
12430
22200
36500
10
12
TECHNICAL DATA
www:
CONTACT
14
0-50psi
333
609
1389
2710
4422
6547
7728
9709
13116
18395
25623
100psi
383
733
1665
3211
5328
8051
9314
11660
15035
22135
30942
200psi
482
979
2218
4212
7134
11059
12485
15562
22023
29616
41579
285psi
567
1188
2687
5063
8672
13615
15181
18880
27070
35974
50621
300psi
582
1225
2770
5214
8943
14066
15856
19455
27961
37096
52216
400psi
682
1471
3322
6216
10751
17074
18828
23387
33899
44577
52854
500psi
781
1717
3875
7216
12560
20082
21999
27270
39837
52057
73491
600psi
881
1963
4427
8218
14358
23089
25171
31172
45775
59538
84129
700psi
981
2209
4979
9219
16177
26097
28342
35075
51713
67018
94765
740psi
1021
2308
5200
9620
16900
27300
29611
36638
54088
70011
98021
800psi
1080
2455
5531
10221
17985
29105
900psi
1180
2701
6084
11222
19794
32112
1000psi
1280
2947
6636
12224
21802
35120
1100psi
1379
3193
7188
13225
23410
38127
1200psi
1479
3440
7741
14227
25219
41135
1300psi
1579
3686
8293
15228
27027
44143
1400psi
1678
3932
8845
16230
28836
47150
1480psi
1758
4129
9287
17031
30283
49557
HELP
24
(p204)
D Y N A C E N T R I C H I G H P E R F O R M A N C E B U T T E R F LY VA LV E S
W-K-M
Dimensional Data
CONTACT
CONTENTS MENU
Valve
Size
3
4
6
8
10
12
53/8
65/8
83/4
11
131/4
153/4
115/16
22/32
223/64
217/32
225/32
315/32
51/2
63/8
75/8
87/8
97/8
111/4
Valve
Size
3
4
6
8
10
12
1/4 Sq.
1/4 Sq.
5/16 Sq.
5/8
7/16
5/8
7/16
7/8
11/8
11/8
13/8
5/8
71/2
9
11
131/2
16
183/4
6
71/2
91/2
113/4
141/4
17
2
2
2
21/8
21/8
23/4
4
4
4
41/4
41/4
51/2
7/16
7/8
3/8-16
7/16
7/8
3/8-16
7/16
13/16
7/8
11/4
11/4
15/8
3/8-16
57/64
2
2
2
2
2
25/8
35/8
55/8
75/8
91/2
111/2
19/16
19/16
2
AA
EE
FF
GG
HH
5/8-11
4
8
8
8
12
12
63/8
71/4
81/2
10
11
123/4
21/4
21/4
21/4
31/2
3
3
3
31/2
31/2
55/16
13/32
11/32
13/32
11/32
13/32
11/32
9/16
9/16
75/8
115/8
81/2
131/8
93/4
153/4
119/16 1811/16
125/8
203/4
1413/16 243/4
41/64
49/64
49/64
57/64
5/8-11
3/4-10
3/4-10
7/8-9
7/8-9
*Pressure ratings are in accordance with ANSI B16.34 for group 1.1
carbon steel valves.
5/8
5/8
9/16
13/16
3/8-16
3/8-16
1/2-13
Weight-Lbs Weight-Lbs
Lug Body Wafer Body
20
35
55
83
125
175
16
25
35
57
90
150
TECHNICAL DATA
www:
CONTACT
Valve
Size
14
16
18
20
24
17
191/4
211/2
235/8
281/8
321/32
49/64
41/2
5
61/16
Valve
Size
13/8
13/4
2
2
21/2
201/2
231/2
243/4
271/4
32
5/16
14
16
18
20
24
HELP
Sq.
Sq.
1/2 Sq.
1/2 Sq.
5/8 Sq.
3/8
11/64
11/64
19/64
19/64
117/64
4
4
4
4
4
183/4
211/4
223/4
25
291/2
37/16
37/16
43/4
43/4
43/4
67/8
67/8
91/2
91/2
91/2
7/8
1/2-13
1
1
1
13/4
13/4
2
2
2
1215/32
1419/64
1617/64
185/64
217/16
2
23/4
3
3
33/4
AA
EE
FF
GG
HH
11/16
11/16
11/16
1-8
1-8
11/8 -8
11/8 -8
11/4 -8
12
16
16
20
20
131/2
151/32
171/2
1813/16
20 3/4
*Pressure ratings are in accordance with ANSI B16.34 for group 1.1
carbon steel valves.
31/2
425/32
1
4 /16
55/16
425/32 27/8 x 615/16
425/32 27/8 x 615/16
425/32 27/8 x 615/16
7/8
13/16
9/16
11/16
13/16
15/16
13/16
15/16
13/16
15/16
13/16
1/2-13
Weight-Lbs Weight-Lbs
Lug Body Wafer Body
230
360
455
570
890
(p205)
170
270
330
390
640
D Y N A C E N T R I C H I G H P E R F O R M A N C E B U T T E R F LY VA LV E S
W-K-M
Dimensional Data
Optional Flange Mounting
Bracket (Actuator Code-FG)
3
4
6
8
10
12
53/8
65/8
83/4
11
131/4
153/4
115/16
23/32
223/64
225/32
31/32
315/32
51/2
63/8
75/8
87/8
107/8
121/4
75/8
81/2
93/4
119/16
147/16
161/2
115/8
131/8
153/4
1811/16
24
2731/64
49/64
65/8
77/8
105/8
13
151/4
173/4
2
2
2
21/8
23/4
23/4
4
4
4
41/4
51/2
51/2
7/16
7/8
3/8-16
7/16
7/8
3/8-16
7/16
11/16
19/64
2
2
2
2
4
4
13/16
7/8
11/4
15/8
15/8
25/8
35/8
55/8
75/8
91/2
111/2
19/16
2
23/4
Valve
Size
AA
EE
FF
GG
HH
3
4
6
8
10
12
1/4 Sq.
5/16 Sq.
3/8 Sq.
5/8
7/16
63/8
71/4
81/2
10
123/8
133/4
21/4
21/4
21/4
31/2
31/2
3
3
3
31/2
55/16
55/16
11/32
11/32
5/8
8
8
12
12
16
16
13/32
7/8
11/8
13/8
13/4
13/32
7/16
81/4
93/4
121/4
143/4
171/4
20
3/4-10
5/8
13/32
11/32
CONTACT
CONTENTS MENU
49/64
49/64
57/64
3/4-10
3/4-10
7/8-9
1-8
11/8-8
*Pressure ratings are in accordance with ANSI B16.34 for group 1.1
carbon steel valves.
5/8
13/16
9/16
11/16
9/16
11/16
9/16
3/8-16
3/8-16
1/2-13
1/2-13
Weight-Lbs Weight-Lbs
Lug Body Wafer Body
25
38
67
115
145
225
16
25
35
61
110
170
TECHNICAL DATA
www:
Note: Minimum pipe I.D. required for disc swing
clearance: Schedule 80 pipe or equivalent.
(18" - 24" 300 schedule XS only)
CONTACT
Series A5300, Class 300, 740 PSI CWP* (inches)
Valve
Size
14
16
18
24
171/2
191/4
22
291/8
45/8
59/32
513/16
71/4
135/8
145/8
165/32
195/8
Valve
Size
AA
EE
Sq.
Sq.
5/8 Sq.
7/8 Sq.
2
2
21/2
31/2
223/4
251/2
28
36
11/16
11/8-8
11/4-8
11/4-8
11/2-8
20
20
24
24
165/8
175/8
195/32
235/8
425/32
425/32
425/32
1/2
14
16
18
24
HELP
1/2
E
11/8-8
11/4-8
11/4-8
11/2-8
20
33
21
357/32
235/32 3837/64
2711/16 4815/32
11/16
11/16
1.25
1.50
1.56
1.38
4
4
4
4
201/4
221/2
243/4
32
43/4
43/4
43/4
6
91/2
91/2
91/2
12
1
1
1
11/2
2
2
2
3
3/4-10
1215/32
145/16
161/4
217/16
3
3
33/4
4
GG
HH
13/16
*Pressure ratings are in accordance with ANSI B16.34 for group 1.1
carbon steel valves.
FF
13/16
13/16
Weight-Lbs Weight-Lbs
Lug Body Wafer Body
490
650
925
1625
(p206)
290
360
480
930
D Y N A C E N T R I C H I G H P E R F O R M A N C E B U T T E R F LY VA LV E S
W-K-M
Dimensional Data
CONTACT
CONTENTS MENU
Valve
Size
3
4
6
8
10
53/8
67/8
9
111/2
131/2
115/16
23/8
229/32
321/32
421/32
51/2
63/4
9
97/8
12
75/8
87/8
113/4
133/8
163/8
115/8
137/8
1815/16
211/8
267/8
49/64
65/8
81/2
111/2
133/4
17
2
2
21/8
23/4
23/4
4
4
41/4
51/2
51/2
7/16
7/8
3/8-16
7/16
7/8
3/8-16
11/64
19/64
11/4-8 1.38
2
2
4
4
4
5/8
3/8-16
13/16
11/4
15/8
15/8
25/8
35/8
55/8
75/8
91/2
19/16
2
23/4
Valve
Size
AA
EE
FF
GG
HH
3
4
6
8
10
1/4 Sq.
5/16 Sq.
3/8 Sq.
5/8
7/16
63/8
75/8
101/8
113/8
131/2
21/4
21/4
31/2
31/2
3
3
31/2
55/16
55/16
11/32
11/32
8
8
12
12
16
13/32
11/8
13/8
13/4
13/32
5/8
81/4
101/2
135/8
161/8
191/2
3/4-10
7/8
57/64
7/8-9
1-8
11/8-8
11/4-8
*Pressure ratings are in accordance with ANSI B16.34 for group 1.1
carbon steel valves.
13/16
9/16
11/16
9/16
11/16
9/16
1/2-13
1/2-13
Weight-Lbs Weight-Lbs
Lug Body Wafer Body
25
53
85
165
329
16
30
52
105
225
TECHNICAL DATA
www:
CONTACT
Valve
Size
12
161/4
517/32
Valve
Size
Sq.
1/2
12
321/4
11/4-8 1.25
191/4
43/4
91/2
111/2
AA
EE
FF
GG
HH
21.75
11/16
11/4-8
20
27/8 x 615/16
15/16
13/16
1215/16 1937/64
*Pressure ratings are in accordance with ANSI B16.34 for group 1.1
carbon steel valves.
1515/16 425/32
Weight-Lbs Weight-Lbs
Lug Body Wafer Body
520
HELP
(p207)
360
D Y N A C E N T R I C H I G H P E R F O R M A N C E B U T T E R F LY VA LV E S
W-K-M
CONTACT
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
Dimensions (inches)
Weight (lbs)
Valve Size
and Class
F (Dia.)
G.O.
Mtg.
3" 150/300/600
4" 150/300
4" 600
6" 150/300
6" 600
8" 150/300
8" 600
10" 150
10" 300
10" 600
12" 150
12" 300
12" 600
14" 150
14" 300
16" 150
16" 300
18" 150
18" 300
20" 150
24" 150
24" 300
63/8
63/8
63/8
63/8
91/8
91/8
131/8
91/8
131/8
151/8
131/8
151/8
171/8
131/8
171/8
151/8
171/8
171/8
181/16
171/8
181/16
205/8
25/8
25/8
25/8
25/8
3
3
31/4
3
31/4
49/16
31/4
49/16
49/16
31/4
49/16
49/16
49/16
49/16
41/2
49/16
41/2
53/25
11/8
11/8
11/8
11/8
13/8
13/8
11/2
13/8
11/2
25/8
11/2
25/8
25/8
11/2
25/8
25/8
25/8
25/8
21/8
25/8
21/8
25/16
63/8
71/4
75/8
81/2
101/8
10
113/8
11
123/8
131/2
123/4
133/4
1515/16
131/2
165/8
151/32
175/8
171/2
195/32
1813/16
203/4
235/8
13/4
13/4
13/4
13/4
21/2
21/2
3
21/2
3
31/2
3
31/2
31/2
3
31/2
31/2
31/2
31/2
45/8
31/2
45/8
61/4
8
8
8
8
12
12
18
12
18
24
18
24
30
18
30
24
30
30
30
30
30
30
13
13
13
13
19
19
33
19
33
43
33
43
49
33
49
43
49
49
80
49
80
142
31/2
31/2
31/2
31/2
4
4
8
4
8
8
8
8
18
10
18
10
18
18
18
18
18
25
Handle Actuators
Valve Size
& Class
Dimensions (inches)
Handle
No.
A
B
C
D
E
Wt.
(lbs)
12 63/8
75/8
1
12 7 /4
81/2
5
18 7 /8
87/8
1
18 8 /2
93/4
1
18 10 /8 113/4
18 10
111/2
6
6
10
10
10
10
3" 150/300/600
4" 150/300
4" 600
6" 150/300
6" 600
8" 150
H-16
H-16
H-36
H-36
H-46
H-46
41/2
41/2
41/2
41/2
41/2
41/2
59/16
59/16
59/16
59/16
59/16
59/16
CAUTION: Handle operated valves should be installed with seat downstream. Handles should only be used up to the following differential
pressures:
3" valves to 400 psi
4" valves to 300 psi
6" valves to 150 psi
8" valves to 50 psi
HELP
(p208)
NE-C,
E R I E S
NE-I,
NE-D,
N E I - T,
2" 1 2 "
NE-D
Parts
Detail
Ref.
Component
Reqd
No.
Description
1
2
3
4
6
7
14
22
23
24
NE-I
NEI-T
NE-C
DEMCO
1
1
1
1
1
2
1
1
Material
Body
Seat
Disc
Upper Stem
Lower Stem
Spring Pin
Retainer
Top O-Ring
Stem O-Ring
Bearing
*
*
*
*
*
Stainless Steel
Stainless Steel
Buna-N
Buna-N
Bronze
How to Order (example: 6" NE-C, 200PSI, Wafer, Standard trim with handle 22124-1215311)
CONTACT
X X X X X
Base Part
Number
Body
Configuration
Body
Material*
Stem
Material
Disc
Material
Seat
Elastomer
Actuation
NE-C/NE-I/NEI-T
CONTENTS MENU
Wafer
Lug
NE-D
NE - C (Longneck)
Ductile Iron (lug)
Cast Iron (wafer)
NE - C & NE - I
1
416 SS
316 SS**
Wafer
Ductile Iron
(wafer only)
Monel
Aluminum Bronze 3
TECHNICAL DATA
Based on
valve series
and shut off
pressure.
See page 203.
www:
Aluminum
(wafer only)
ENC Coated
Ductile Iron
Stainless Steel
Monel(6)
Hypalon
Aluminum
Bronze
416 SS
316 SS**
Monel(6)
316 SS**
Gray Iron
(longneck wafer)
34
Square Nut
EPT
35
Natural Rubber
36
White Neoprene
37
ETM-30230
01
Fluorosteam
02
Hastelloy C(6) 8
03
NE I-T &
NE-I Sanitary
Peroxide Cured
Buna-N
04
Alloy 20(2)
35
316 SS
Tumbled(3)
Sulfur Cured
EPT / Teflon(6)
05
Alloy 20
(NEI-T only)
7
8
Aluminum
(wafer only)
316 SS
Unpolished(3)
Stainless Steel
Peroxide Cured
EPT/Teflon(6)
Carbon Steel
NE I-T
31
Hastelloy C
(NEI-T only)
(6)
Buna-N/Teflon(6)
None
10 Position Lkg.
Corrosion
K
resistant
2 Position Lkg.
Corrosion
resistant
Throttling/
Mem. stop
Gear Operators(5)
NE -I Sanitary
All Seats Food Grade
Buna-N
31
Black Neoprene
32
Viton
34
EPT
35
White Neoprene
37
Hand Wheel
Crank
(2"-12" only)
Chain Wheel
Square Nut
Bare Stem
HELP
316 SS/
PVF Coated
(NEI-T only)
Aluminum Bronze 3
32
Viton(6)
316 SS
Polished(3)
1
Black Neoprene
NEI - T
Ductile Iron
WaferShortneck
LugLongneck
31
33
NE-I Sanitary
Ductile Iron
Buna-N
Handle
Throttling
Mem./Stop
PVF Coated
6
Ductile Iron(1)
316 SS
2
Vented***
316 SS
Solid***
NE - C, NE - I & NE-D
Ductile Iron
Nickel Plated 5
NEI - T
NE - D
CONTACT
316 SS
NE - D
Carbon Steel
(NE-I only)
(6)
NE - C, NE - I
& NE-D
4. When these options used with NE-I Sanitary butterfly valves, handles
will be bronze with SS parts and fasteners.
5. Gear operator recommended for 8"-12" sizes in all series.
6. See material trademark note on page 226.
(p209)
NF-C,
E R I E S
1 4" 2 4"
DEMCO
Parts Detail
Ref.
No.
Reqd
Component
Description
Material
1
2
3
4
6
7
14
23
24
25
1
1
1
1
1
2
1
2
1
Body
Seat
Disc
Upper Stem
Lower Stem
Spring Pin
Retainer (Spacer)
Disc O-Ring
Upper Bearing
Lower Bearing
*
*
*
*
*
Stainless Steel
Steel
Buna-N
Bronze
Bronze
CONTACT
CONTENTS MENU
How to Order (example: 18" NF-C, 150PSI LUG, SS trim, Buna-N seat, WGO. 23822-512231A)
X X X X X
Base Part
Number
Body
Configuration
Body
Material*
Stem
Material
Disc
Material
Seat
Elastomer
Actuation
TECHNICAL DATA
Wafer
416 SS
316 SS
Buna-N
Lug
316 SS
Monel
Black Neoprene
32
Gear Operators
Steel (lug)
Monel(2)
Hypalon(2)
33
Hand Wheel
Aluminum
Bronze
Viton
34
Chain Wheel
EPT
35
Square Nut
Bare Stem
www:
CONTACT
(2)
(2)
Nickel Plated
5
Iron
Based on
shut off
pressure.
See page 203.
PVF Coated
Ductile Iron(1)
31
None
HELP
(p210)
E R I E S
NF-C,
30" 48"
DEMCO
Parts Detail
CONTACT
Ref.
No.
Reqd
Component
Description
3
4
6
7
8
9
14
24
25
26
27
1
1
1
2
1
2
1
2
1
1
1
Body
Seat Hard-Backed
30"- 36"
Seat Elastomer Liner
42"- 48"
Disc150 psi
Upper Stem
Lower Stem
Disc Screw
Key
O-Ring
Spacer
Upper Bearing
Lower Bearing
Thrust Collar
Set Screw
28
Cap
29
30
4
4
Screw
Lockwasher
Material
*
*
*
*
*
18-8 SS
Stainless Steel
Buna-N
Steel
Bronze
Bronze
Bronze
18-8 SS
Duct Iron 30"- 36"
Cast Iron 42"- 48"
Carbon Steel
Carbon Steel
CONTENTS MENU
TECHNICAL DATA
How to Order (Example: 42", 150 psi, bronze disc, EPT seat with Gear Op 24106-621435A)
X X X X X
Base Part
Number
www:
CONTACT
Wafer
Lug
Flange
42"& 48"
Body
Configuration
Body
Material*
Stem
Material
Disc
Material
Seat
Elastomer
Gear
Operators
Ductile Iron
(Wafer or lug)
Cast Iron
(Flanged only)
416 SS
316 SS
Buna-N
31
Hand Wheel
316 SS
Monel
Black Neoprene
32
Chain Wheel
Monel
Aluminum
Bronze
Hypalon
33
Square Nut
Viton
34
Bare Stem
EPT
35
Ductile Iron
5
Nickel Plated
See Page 203
HELP
(p211)
U T T E R F L Y
DEMCO
A L V E S
2"
21/2"
3"
4"
5"
6"
8"
10"
12"
22119
22225
22234
22243
5.8
8.0
22120
22226
22235
22244
7.0
9.9
22121
22227
22236
22245
7.7
10.7
22122
22228
22237
22246
11.4
17.0
22123
22229
22238
22247
14.7
24.5
22124
22230
22239
22248
17.6
28.5
22125
22231
22240
22249
28.5
43.5
22126
22232
22241
22250
47.9
65.9
22127
22233
22242
22251
71.0
98.5
Description
2"
21/2"
3"
4"
5"
6"
8"
10"
12
200 psi
285 psi
50 psi
Throttling
Iron, Steel, SS
Weight
(lbsbare stem)
Bronze
Wafer
Aluminum
Weight
Bronze
(lbsbare stem)
Steel, SS
Lug
22128
22252
22261
22270
4.9
4.7
2.8
6.8
7.0
22129
22253
22262
22271
6.4
6.2
3.4
8.7
8.9
22130
22254
22263
22272
6.9
6.7
4.1
9.5
9.7
22131
22255
22264
22273
10.2
9.9
5.9
15.7
16.0
22132
22256
22265
22274
13.7
13.4
8.7
23.1
23.5
22133
22257
22266
22275
16.4
16.0
10.8
27.0
27.5
22134
22258
22267
22276
28.4
28.0
18.2
42.0
42.5
22135
22259
22268
22277
44.8
44.3
30.4
64.4
64.9
22136
22260
22269
22278
66.8
66.3
47.2
96.8
97.5
200 psi
285 psi
50 psi
Throttling
Wafer
Weight
(lbsbare stem)
Lug
CONTACT
CONTENTS MENU
2"
21/2"
3"
4"
200 psi
Weights
23150
23151
23152
6"
8"
23153
23154
23155
See chart above, NE-I, 2"12"
10"
12"
23156
23157
TECHNICAL DATA
Description
2"
21/2"
3"
4"
5"
6"
8"
10"
12"
200 psi
285 psi
50 psi
Throttling
22181
22279
22285
22291
22129
22253
22262
22271
22182
22280
22286
22292
22183
22281
22287
22293
22184
22282
22288
22294
22185
22283
22289
22295
22134
22258
22267
22276
22186
22284
22290
22296
22136
22260
22269
22278
4.9
6.4
6.9
10.2
13.7
16.4
28.4
44.8
66.8
Weight
(lbs-bare stem)
www:
Wafer
CONTACT
150 psi
Iron, Steel, SS
Weight
(lbs-bare stem)
Bronze
Wafer
Aluminum
Weight
Bronze
(lbs-bare stem)
Steel,
SS
Lug
2"
21/2"
3"
4"
6"
8"
10"
24680
4.9
4.7
2.8
6.8
7.0
24681
6.4
6.2
3.4
8.7
8.9
24682
6.9
6.7
4.1
9.5
9.7
24683
10.2
9.9
5.9
15.7
16.0
24684
16.4
16.0
10.8
27.0
27.5
24685
28.4
28.0
18.2
42.0
42.5
24686
44.8
44.3
30.4
64.4
64.9
See NE-C chart above for weights of Long Neck Wafer and Lug valves.
HELP
16"
18"
20"
24"
Description
30"
36"
42"
48"
150 psi
Weights
24141
C/F
24357
C/F
24106
C/F
24832
C/F
C / F = Consult Factory.
(p212)
U T T E R F L Y
DEMCO
A L V E S
CONTACT
CONTENTS MENU
Size
2"
21/2"
3"
4"
5"
6"
8"
10"
12"
1.74
1.86
1.86
2.11
2.24
2.24
2.54
2.74
3.24
5.62
6.12
6.38
7.12
7.75
8.25
9.44
11.25
12.19
8.44
9.19
9.69
11.00
12.12
13.25
15.56
18.69
21.69
4.12
4.88
5.38
6.88
7.75
8.75
11.00
13.38
16.12
4.00
4.00
4.00
4.00
4.00
4.00
6.00
6.00
6.00
3.25
3.25
3.25
3.25
3.25
3.25
5.0
5.0
5.0
.408
.408
.408
.408
.408
.408
.533
.533
.533
4.75
5.50
6.00
7.50
8.50
9.50
11.75
14.25
17.00
5/8-11
4
4
4
8
8
8
8
12
12
1.00
1.00
1.00
1.00
1.25
1.25
1.38
1.38
1.38
.44
.44
.44
.44
.44
.44
.56
.56
.56
.625
.625
.625
.625
.838
.838
.838
.963
1.338
.375
.375
.375
.375
.500
.500
.500
.625
.750
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
7/8-9
7/8-9
www:
CONTACT
HELP
Size
14"
3.00
16"
10.63 12.75
23.4
16.20
17.3*
5.00
.56
18.75
1-8
1*
12
2.00
2.25
.88
1.375
5/16 5/32
5.12
12.89
4.00
11.66 13.75
25.4
18.16
19.2*
5.00
.56
21.25
1-8
1*
16
2.00
2.25
.88
1.625
3/8 3/16
5.65
14.76
18"
4.50
12.96 14.75
27.7
20.35
21.4*
6.50
.81
22.75
11/8-7
11/8*
16
2.50
2.75
1.00
1.875
1/2 3/16
6.37
16.63
20"
5.00
13.97 15.75
29.7
22.63
23.6*
6.50
.81
25.00
11/8-7
11/8*
20
2.50
2.75
1.00
1.875
1/2 3/16
7.12
18.58
24"
6.00
16.19 19.00
35.2
27.31
28.3*
6.50
.81
29.50
11/4-7
11/4*
20
2.50
3.00
1.00
1.875
1/2 3/16
8.67
22.56
(p213)
U T T E R F L Y
DEMCO
A L V E S
CONTACT
Dimensional Data (inches)
Size
30" 6.50
21.2
23.0
44.2
34.1
3.4
3.7
36" 7.88
25.0
27.8
52.8
4.0
4.4
60.4
53.0 10.25 .81 49.50 1 /2-6UNC 32* 3.88 3.88 1.50 4.240 3/4 3/8 15.67 40.02 1.75 2.625
42" 9.88
CONTENTS MENU
28.9
31.5
34.8
1
1
68.0
59.5 16.00 .81 56.00 1 /2-6UNC 36* 5.00 6.00 1.50 4.995
TECHNICAL DATA
www:
CONTACT
HELP
Size
2"
21/2"
3"
4"
5"
6"
8"
10"
12"
1.74
1.86
1.86
2.11
2.24
2.24
2.54
2.74
3.24
3.94
4.44
4.88
6.00
6.00
6.50
8.06
9.97
10.91
6.75
7.50
8.19
9.88
10.38
11.50
14.19
17.41
20.41
4.12
4.88
5.38
6.88
7.75
8.75
11.00
13.38
16.12
4.00
4.00
4.00
4.00
4.00
4.00
6.00
6.00
6.00
3.25
3.25
3.25
3.25
3.25
3.25
5.0
5.0
5.0
.408
.408
.408
.408
.408
.408
.533
.533
.533
4.27
5.31
4.91
7.03
7.56
9.16
11.72
13.72
16.62
3/8
4
4
6
6
6
8
8
8
12
1.00
1.00
1.00
1.00
1.25
1.25
1.38
1.38
1.38
.44
.44
.44
.44
.44
.44
.56
.56
.56
.625
.625
.625
.625
.838
.838
.838
.963
1.338
.375
.375
.375
.375
.500
.500
.500
.625
.750
3/8
3/8
1/2
1/2
1/2
5/8
5/8
1/2
(p214)
U T T E R F L Y
DEMCO
A L V E S
CONTACT
CONTENTS MENU
Size
2"
21/2"
3"
4"
5"*
6"
8"
10"
12"
1.74
1.86
1.86
2.11
2.24
2.24
2.54
2.74
3.24
3.94
4.44
4.69
5.44
6.38
6.88
8.06
9.97
10.91
6.75
7.50
8.00
9.31
10.75
11.88
14.19
17.41
20.41
4.12
4.88
5.38
6.88
7.75
8.75
11.00
13.38
16.12
4.00
4.00
4.00
4.00
4.00
4.00
6.00
6.00
6.00
3.25
3.25
3.25
3.25
3.25
3.25
5.0
5.0
5.0
.408
.408
.408
.408
.408
.408
.533
.533
.533
4.75
5.50
6.00
7.50
8.50
9.50
11.75
14.25
17.00
5/8-11
4
4
4
8
8
8
8
12
12
1.00
1.00
1.00
1.00
1.25
1.25
1.38
1.38
1.38
.44
.44
.44
.44
.44
.44
.56
.56
.56
.625
.625
.625
.625
.838
.838
.838
.963
1.338
.375
.375
.375
.375
.500
.500
.500
.625
.750
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
7/8-9
7/8-9
TECHNICAL DATA
www:
CONTACT
Size
2"
21/2"
3"
4"
6"
8"
10"
1.74
1.86
1.86
2.11
2.24
2.54
2.74
3.94
4.44
4.69
5.44
6.38
8.06
9.97
6.75
7.50
8.00
9.31
11.88
14.19
17.41
4.12
4.88
5.38
6.88
8.75
11.00
13.38
4.00
4.00
4.00
4.00
4.00
6.00
6.00
3.25
3.25
3.25
3.25
3.25
5.0
5.0
.408
.408
.408
.408
.408
.533
.533
4.75
5.50
6.00
7.50
9.50
11.75
14.25
5/8-11
4
4
4
8
8
8
12
1.00
1.00
1.00
1.00
1.25
1.38
1.38
.44
.44
.44
.44
.44
.56
.56
.625
.625
.625
.625
.838
.838
.963
.375
.375
.375
.375
.500
.500
.625
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
7/8-9
HELP
(p215)
U T T E R F L Y
A L V E
DEMCO
A N D L E S
How to Order ( X X X X X - 0 0 X )
XXXXX
00X
Base Part
Number
Trim
2 Position/10 Position Locking Handles
1
Dimension
2"- 4"
5"- 6"
8"- 12"
Dimension
2"- 4"
5"- 6"
8"- 12"
Corrosion
Resistant
M
N
9.50
.85
11.00
1.07
15.00
1.13
M
N
9.50
.87
11.00
1.07
15.00
1.13
Sanitary
Standard
CONTACT
CONTENTS MENU
Description
2"- 4"
5"- 6"
8"
10"
12"
10 Position, Std, CR
2 Position, Std, CR
10 Position, Sanitary
2 Position, Sanitary
Throttling, Std/CR
Throttling, Sanitary
Square Nut, Std
24227
24232
22319
22324
24252
22329
23356
24228
24233
22320
22325
24253
22330
23357
24229
24234
22321
22326
24254
22331
23358
24230
24235
22322
22327
24255
22332
23359
24231
24236
22323
22328
24256
22333
22360
TECHNICAL DATA
www:
CONTACT
Ref.
No.
Component
Description
5
Screw
8
Handle
10
Latch
11
Spring
12
Spring Pin
15 Throttle Plate
16
Lockwasher
19
Nut
20
Set Screw
25* Throttling Tab
26* Carriage Bolt
27*
Wing Nut
28*
Screw
29*
Nut
HELP
Material
Standard
Corrosion Resistant
Sanitary
Steel
Ductile Iron
Zinc Plated Steel
Spring Steel
Spring Steel
Zinc Plated Steel
Steel
Steel
Steel
Zinc Plated Steel
Steel
Steel
Steel
Steel
Stainless Steel
Ductile Iron
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Bronze
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Material
Ductile Iron
Steel
Steel
Steel
Steel
Spring Steel
(p216)
E A T H E R P R O O F
E A R
DEMCO
P E R A T O R S
How to Order, 2" 12" (Example: 6" Gear Operator with Handwheel 22622-21352)
X X X X X
Base Part
Number
Case
Material
Gear
Material
Actuation
Valve
Size
Configuration
Gray Iron
Ductile Iron
CONTACT
Description
2"4"
Crank
2" 4"
Handwheel
5" 6"
Chainwheel
8"
Square Nut
10"
None
12"
5"6"
8"
Standard
10"
22622
12"
22623
Additional Information
Chain Suffix = Length in Ft.*
CONTENTS MENU
4462-XXX
11.0
17.0
17.4
17.4
X X
Base Part
Number
Gear Operator
Assembly Part Number
TECHNICAL DATA
www:
09
03
05
06
Description
14"
16"
18"20"
24"
30"
36"
42"
48"
2060229
2060230
2060231
2060232
2060332
2060334
2060805
2060806
4462-XXX
4463-XXX
C /F
C /F
19.0
22.0
C /F
C /F
CONTACT
Additional Information
4463-XXX 19932-XXX 4463-XXX 19932-XXX
33.0
43.0
107.0
137.0
*Chain Length (XXX) = 000 through 999 ft. (Chain ordered separately)
C/F = Consult Factory
Valve Size
HELP
Gear Ratio
Turns/90 Rotation
2" 6"
30:1
7.5
46 ft.-lbs.
8" 12"
48:1
12
65 ft.-lbs.
14" 16"
48:1
12
65 ft.-lbs.
18" 20"
57:1
14 -1/4
98 ft.-lbs.
24"
60:1
15
164 ft.-lbs.
30"
316:1
79
104 ft.-lbs.
36"
240:1
60
174 ft.-lbs.
42"
360:1
90
147 ft.-lbs.
48"
C/F
C/F
C/F
(p217)
E A T H E R P R O O F
E A R
DEMCO
P E R A T O R S
Optional Handwheel
CONTACT
CONTENTS MENU
2" through 24" Valves
TECHNICAL DATA
Optional Square Nut
www:
Optional Chainwheel
Valves with chainwheels should be installed upside down
as noted to ensure pipe clearance and allow visual contact
with the position indicator.
CONTACT
Dimensional Data (inches)
Valve Size
M1
2" 6"
.63
1.00
.19
4.35
8"10"
.63
1.00
.19
4.32
12"
.63
1.00
.19
5.02
14"
.63
1.25
.19
6.56
12
16"
.63
1.25
.25
11.00
18
18" 20" 3.12 3.12 7.12 3.00 3.12 7.69 1.50 3.25 1.00 1.25
.25
11.25
18
HELP
24"
3.44 3.44 5.28 3.63 3.25 8.38 1.63 3.56 1.00 1.25
.38
10.91
24
30"
4.56 8.88 4.52 4.63 4.63 11.08 2.00 4.44 1.00 1.25
.39
18
36"
5.88 9.12 4.56 6.25 5.88 14.50 2.31 5.00 1.00 1.25
.39
24
42"
5.88 9.12 5.50 6.25 5.88 14.50 2.31 5.00 1.00 1.25
.39
6.36 8.25
C/F
C/F
C/F
C/F
C/F
C/F
C/F
48"
C/F
C/F
C/F
C/F
C/F
C/F
C/F
C/F
C/F
C/F
C/F
C/F
C/F
C/F
C/F
C/F
C/F
C/F
C/F
C/F
(p218)
DR S
E R I E S
I S T O N
Consult the factory for complete data sheets showing mounting configurations. Flatted stems are standard on 2"-12" Butterfly Valves
(NE-C, NE-I, NE-D), whereas 14"-48" NF-C utilize a keyed stem.
Series DR Actuators are available as Double-Acting or Spring
Return. Double-Acting is the most economical, requiring either air
or hydraulic pressure for opening and closing (fail last position).
Spring-Return Actuators use compression
Remove indicator
spring(s) to move valve in one direction,
for access to manual
override wrench flats
while air pressure moves it in the
opposite direction. Spring Return
Actuators are used when valves
must move to a predetermined
position upon air supply failure
(fail open or fail closed).
Demco Series DR Piston Actuators consist of two opposed pistons with integral gear racks which are coupled to a common central drive shaft to produce rotary motion.
In the basic unit, the Body, Pistons and End Caps are aluminum; the Central Drive Shaft is hard anodized, high performance Aluminum Alloy 70-75. The Fasteners are plated steel; the
Seals are Buna-N. All units are totally enclosed and use gaskets
for weatherproof operation. Carbon filled teflon guide bands support the pistons to eliminate metal-to-metal contact during actuator operation. As a result, piston o-rings designed for sealing are
not required to perform bearing functions.
Mounting the actuator to the valve for many popular sizes is
direct, requiring only a splined, aluminum stem adapter. Other sizes
may require the addition of an aluminum adapter plate, but still
make a closed coupled unit. Some sizes (mostly the larger valves)
will require the traditional steel brackets/coupling mounting kit.
CONTACT
XX
Actuator
Orientation
Open
CONTENTS MENU
TECHNICAL DATA
Actuator Size
DEMCO
C T U AT O R S
Actuator
Model
40
60
80
100
120
EDA40
204
310
416
513
620
EDA65
310
469
628
788
947
EDA100
460
699
929
1168
1398
EDA200
1009
1522
2044
2558
3071
EDA350
1761
2655
3549
4443
5337
PDA500
2339
3531
4722
5913
7104
PDA750
3479
5251
7022
8794
10566
PDA1100
5131
7744
10357
12970
15583
PDA2500
11825
17847
23869
29891
35912
PDA4000
19962
30127
40293
50458
60623
Valve Size
Orientation
EDA 40
01
See drawing
2"- 4"
EDA 65
02
See drawing
EDA 100
03
8"
EDA 200
04
10"
EDA 350
05
12"
PDA 500
06
14"
PDA 700
07
16"
PDA 1100
08
18"
PDA 2500
09
PDA 4000
10
Orientation 0
Orientation
0
Close
Orientation 3
Orientation
3
www:
CONTACT
Valve Size
2"
2-1/2"
3"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
30"
36"
42"
48"
225
326
510
765
1190
1530
2550
4125
7000
132
192
300
450
700
900
1500
2650
4500
108
108
192
264
450
550
1000
1800
3000
4500
6500
Throttling*
72
72
90
108
144
180
350
700
1160
1660
2800
3400
5000
8400
HELP
Valve Size
2"
2-1/2"
3"
4"
5"
6"
8"
338
489
765
1148
1785
2295
3825
198
288
450
675
1050
1350
162
162
288
396
Throttling*
144
144
180
216
10"
12"
14"
16"
18"
20"
24"
30"
36"
42"
48"
6188 10500
2250
3975
6750
675
825
1500
2700
4500
6750
288
360
700
1400
2320
3320
5600
* When line velocity exceeds 15 feet per second, dynamic torque exceeds opening torque.
** For Series NEI-T Butterfly Valve torque requirement, consult factory.
(p219)
DR S
E R I E S
I S T O N
DEMCO
C T U AT O R S
Actuator Orientation
Open
XX
Springs*
Actuator Size
Close
Valve Size
Orientation
Spring Set 2
ESA 40
01
See drawing
2"- 4"
Spring Set 3
ESA 65
02
See drawing
Spring Set 4
ESA 100
03
8"
Spring Set 5
(Standard)
ESA 200
04
10"
Spring Set 6
ESA 350
05
12"
14"
Orientation 0
Spring Close
(Stroke C & F)
Orientation 3
Spring Open
(Stroke D & E)
CONTACT
Spring
Set No.
Actuator
Model
2
3
4
5
6
2
3
4
5
6
2
3
4
5
6
2
3
4
5
6
2
3
4
5
6
ESA40
CONTENTS MENU
ESA65
ESA100
TECHNICAL DATA
ESA200
www:
CONTACT
ESA350
40
60
80
100
Spring
Stroke
120
133
91
196
129
303
211
656
448
1105
727
82
15
117
10
192
44
406
74
684
95
243
201
159
364
297
230
552
460
367
1201
994
786
2053
1675
1296
193
125
58
285
178
71
441
293
144
952
619
287
1632
1043
454
312
270
227
185
466
398
331
709
616
523
430
1539
1331
1124
916
2623
2244
1866
236
169
101
34
347
240
133
541
393
245
96
1165
832
500
167
1991
1402
814
422
380
338
296
634
567
499
432
957
865
772
679
2085
1877
1669
1461
3571
3193
2814
2436
346
279
212
144
515
408
301
194
790
642
494
345
1710
1378
1045
713
2939
2350
1762
1173
491
448
406
735
668
601
1114
1021
928
2423
2215
2007
4141
3762
3384
389
322
255
576
470
363
891
743
594
1923
1591
1258
3299
2710
2121
117
176
234
293
351
186
279
372
465
558
258
387
516
646
775
579
868
1157
1447
1736
1025
1537
2049
2531
3074
73
110
146
183
220
117
175
234
292
351
161
242
323
402
484
362
542
723
904
1085
658
987
1317
1646
1975
C
F
CW -0.5
91.5
C
Start
Air Stroke
E
Start
Spring Set #2
Mid Spring Only
D
End
D E
CCW 91
HELP
Spring Stroke
F
End
0
90
Rotation
Counterclockwise
A
90
Rotation
Clockwise
B (Breather)
Spring Set #4
Inner Spring
Outer Spring
Spring Set #3
Outer Spring Only
Spring Set #5
Mid Spring
Outer Spring
Spring Set #6
Inner Spring
Mid Spring
Outer Spring
(p220)
DR S
E R I E S
I S T O N
DEMCO
C T U AT O R S
Actuator Orientation
XX
Open
No. of Springs*
Actuator Size
8 Springs
500
06
See drawing
4"
10 Springs
750
07
See drawing
12 Springs
1100
08
8"
2500
09
10"
4000
10
12"
4004
11
14"
16"
18"- 24"
14 Springs
(Standard)
Close
Valve Size
Orientation
* Select from
Torque Chart
Orientation 0
Spring Close
(Stroke C & F)
Orientation 3
Spring Open
(Stroke D & E)
CONTACT
Actuator
Model
8
10
12
14
8
10
12
14
8
10
12
14
8
10
12
14
8
10
12
14
8
10
12
14
PSA500
CONTENTS MENU
PSA750
PSA1100
TECHNICAL DATA
PSA2500
www:
PSA4000
CONTACT
PSA4004
40
60
80
100
Spring
Stroke
120
2909
7533
6460
11288
859
3750
1731
3299
2526
2275
3827
3471
5522
4966
4410
13555
12482
11409
10336
21454
19282
17117
19156
16414
1108
502
1983
1166
3472
2404
1336
9772
7753
5734
3715
13465
9299
5133
11259
6542
3718
3467
3216
5598
5243
4887
4531
8135
7579
7023
6468
18504
17430
16357
31619
29451
27282
25114
29322
26579
23836
21093
2299
1693
1087
3755
2938
2121
1304
6085
5017
3949
2881
13775
11756
9737
23630
19464
15299
11133
21425
16708
11991
7273
4658
4407
4156
7014
6658
6302
10192
9636
9081
24525
23452
22379
39616
37447
35279
39487
36744
34001
31258
2884
2279
1673
4709
3893
3076
7630
6562
5494
19796
17778
15759
29630
25464
21298
31590
26873
22156
17439
5598
5347
8430
8074
12249
11694
28401
47613
45444
46910
44167
41424
3470
2864
5684
4847
9175
8107
21781
35629
31484
37038
32321
27604
2268
2835
3402
3969
3059
3823
4588
5352
3999
4998
5998
6997
7558
9448
11338
13227
15596
19495
23395
27294
17661
22076
28491
30906
904
1130
1356
1582
1282
1602
1922
2243
2000
2500
3000
3501
3863
4629
5794
6760
7806
9758
11710
13661
9874
12343
14811
17280
C
F
CW -0.5
Spring Arrangement
91.5
C
Start
Air Stroke
E
Start
D
End
D E
CCW 91
HELP
Spring Stroke
F
End
0
90
Rotation
Counterclockwise
A
90
Rotation
Clockwise
8 Springs
10 Springs
12 Springs
14 Springs
B (Breather)
(p221)
DR S
E R I E S
I S T O N
C T U AT O R
OS
weatherproof or NEMA 7 explosion-proof enclosures are available. Solenoid valves are available as 3-way valves for spring
return actuators or 4-way for double acting actuators. Four-way
solenoids are equipped with a push button manual override.
Exhaust metering valves are available to control opening and
closing speed of the butterfly valve.
OP
4-Way
Solenoid
Valve
Declutchable Manual
3-Way
Worm Gear Overrides Solenoid
Valve
Declutchable Manual Worm
Gear Overrides are available for
size 40 through 4004 DR actuators. Especially applicable to
spring return actuators, the handwheel can be engaged with a
special declutch lever to hold the valve in its last position until
the actuator is returned to automatic operation.
Positioners*
Pneumatic positioners are offered for modulating
service. The standard signal range is 3-15 psi, and
may be generated by temperature,
pressure or level controllers.
OPE
N
CL
OSE
D
OPE
N
Optional
Gage Block
CL
OSE
D
Solenoid Valves*
Solenoid Valves are used to direct
supply air to the actuator to open and close the butterfly valve
at the command of an on/off electrical signal. Direct attachment
to the actuator through a manifold eliminates all external piping.
Pressure connections are 1/4 NPT. Standard voltage is 120
VAC; other voltages are available on special order. NEMA 4
CONTACT
DEMCO
C C E S S O R I E S
Manual
Override
CONTENTS MENU
Series DR Actuator Accessory Part Numbers
Actuator Size
24877-021
24877-026
TECHNICAL DATA
www:
CONTACT
5830-250 (2 Required)
21604
24876
2061835-12-04 (Orientation 0)
2061835-11-04 (Orientation 3)
2061836-12-04 (Orientation 0)
2061836-11-04 (Orientation 3)
2061837-12-04 (Orientation 0)
2061837-11-04 (Orientation 3)
2061838-12-04 (Orientation 0)
2061838-11-04 (Orientation 3)
2139067-12-04 (Orientation 0)
2139067-11-04 (Orientation 3)
2139068-12-04 (Orientation 0)
2139067-11-04 (Orientation 3)
2139069-12-04 (Orientation 0)
2139069-11-04 (Orientation 3)
2139070-12-04 (Orientation 0)
2139070-11-04 (Orientation 3)
HELP
E40
E65
E100
E200
E350
P500
P750
Part No.
P1100
P2500
P4000
17808-007
17808-008
17808-009
Note: Declutchable manual override and dual stroke adjustment available for all actuators. Consult factory for pricing.
* Series DR Actuator auxiliary interface complies with NAMUR.
Consult factory for complete data sheets with dimensional information
(p222)
L E C T R I C
DEMCO
C T U AT O R S
Electric Actuators
Electric Actuators are particularly suitable for installation in
remote locations not provided with a pressurized air source.
Electric Actuators are fail in last position, and generally not
available as fail-safe.
Manual
Manual
Override
Override
Electric Actuators are powered
Model
Model
by a rugged high-torque, integral
10-90
100-800
reversible motor rated for 50%
duty cycle. All models feature
Electric Actuator Part Number (order mounting assembly as separate part number, see table below)
XXXXX
CONTACT
XX
Heater/Thermostat
10/10
03 100/16
45 250/16
65
10/30
07 100/30
47 250/30
67
25 Watt Heater/
1
70 Thermostat (3)
10/60
08 100/60
48 250/60
68
None
220 VAC /3 Ph
w/o Rev. Contactor(2) 6
50/10
23 160/8
52 800/30
77
50/30
27 160/16
55 800/60
78
440 VAC /3 Ph
w/ Rev. Contactor(2)
50/60
28 160/30
57 1600/55
16
90/5
31 160/60
58 4000/125 40
90/15
34 250/8
62
(1)
120 VAC/1 Ph
220 VAC /3 Ph
w/o Rev. Contactor(2) 8
Size
TECHNICAL DATA
Voltage
CONTENTS MENU
Number
10 through 800
2 SPDT(5)
4 SPDT
None
(4) Switches
(5) Standard
on sizes
100 through 800
Feedback Potentiometer
Ohm (1% Linearly)
5065
Auxiliary Switches
15 amp/125 VAC (4)
1000
None
(1) 50%
Duty Cycle
Duty Cycle
(3) Recommended for outdoors, high humidity, low temperature, or modulating
(6) NEMA 7 models meet Classes I and II, Groups C-D-E-F and G requirements for hazardous locations.
(2) 25%
www:
Actuator Size
Cycle Time
(In Seconds)
10
50
90
100
160
250
800
1600
4000
5
8
10
15
16
30
55
60
125
275
300
400
-
600
600
600
-
1000
1000
-
1500
1800
2500
-
1920
2000
2500
3000
-
3000
4000
5000
6000
-
10000
10000
-
21000
-
48000
CONTACT
22903
22904
22905
22906
-
Valve
Size
HELP
22907
22908
22909
22910
22911
Consult Factory
22912
22913
Reduce torque output and increase cycle time 20% for 50 Hz operation
30 second minimum cycle time positioning service
(2) Consult factory for complete data sheets with dimensional information
(1)
(p223)
C T U AT O R S
DEMCO
I A P H R A G M
Actuator Orientation
Base Number
Service
From table
below
Air Pressure
Pneumatic
CONTACT
Diaphragm Size
DMC-35
DMC-50
DMC-80
DMC-80A
Valve Size
Orientation
3-15 psi
2"- 4"
20 psi
5" - 6"
30 psi
8"
40 psi
10"
12"
9
CCW
DMC-160A
DMC-160B
CCW
Close Counter-clockwise
Close Counter-clockwise
Open Counter-clockwise
Open Counter-clockwise
CONTENTS MENU
Diaphragm Actuator Assembly Part Numbers
Size
35
50
80
80A
160A
160B
Standard Actuator
23766-12xxx
23766-13xxx
23766-14xxx
23766-15xxx
23766-17xxx
23766-18xxx
TECHNICAL DATA
DMC-35
DMC-50
DMC-80
DMC-80A
DMC-160A
DMC-160B
3-15
255
480
575
905
20
450
570
635
1605
30
545
705
1080
1890
2100
40
600
860
1800
3300
www:
CONTACT
Weatherproof
Position Indicator
Switch Assemblies
Explosion Proof
Position Indicator
Switch Assemblies
Positioner
3-15 psi....23099-011
2-SPDT
23097-911
23097-111
2-DPDT
23097-921
23097-121
2-SPST
23097-931
23097-131
2-SPDT
23097-941
23097-141
2-SPDT
23098-911
23098-111
2-DPDT
23098-921
23098-121
2-SPST
23098-931
23098-131
2-SPDT
23098-941
23098-141
3-9 psi....23099-021
Filter Regulator
9-15 psi....23099-061
12826-001
HELP
8417-102
8417-103
8417-104
8417-107
Note: Where a part number suffix contains an x (example: -xxx), the Assembly Part Number chart should be used to derive the desired option(s).
* Consult factory for complete data sheets with dimensional information
(p224)
T E M
X T E N S I O N S
Stem Extensions
E E S
A N D
Base Part
Number
CONTACT
DEMCO
D A P T E R S
X X X
X X X X
Length
(inches)
Base Part
Number
X X X 0 0
Length
(inches)
Description
2" 4"
5" 6"
8"
10"
12"
14"16"
18" 20"
24"
30"
Carbon Steel
23318
23319
23320
23321
23322
6662
6663
8026
8386
Note: Consult factory for 36", 42", 48" valve stem extensions.
CONTENTS MENU
X X X
Base
Number
Size
2"
2-1/2"
3"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
-008
-010
-012
-016
-020
-024
-032
-040
-048
-056
-064
-072
-080
TECHNICAL DATA
Orientation
www:
CONTACT
XX
14165
Base Part
Number
Orientation
Valve Size
Base Part
Number
Established
at
Order Entry
See
Diagram
HELP
2"
6"
21/2"
8"
XX
Orientation
Valve Size
See
Diagram
14"
16"
3"
10"
18"
4"
12"
20"
5"
(p225)
E N E R A L
E C H N I C A L
DEMCO
N F O R M A T I O N
Pressure Rating
Three drop tight pressure ratings are offered for Demco
Butterfly Valves. Normally, 200 psi shutoff is used in butterfly
applications. However, 285 psi shutoff is optionally available
for higher pressure applications. For smaller actuator sizing, 50
psi valves offer reduced torque.
For minimum torque, throttling valves, which do not provide drop tight closure, are available.
Wafer valve connection
Vacuum Rating
Demco Butterfly Valves will seal against 10 microns of vacuum
(29.9 inches of mercury). For reduced torque and extended seat
life, 50 psi discs are recommended for the dry service conditions found in many vacuum applications.
Marking
Each valve is positively identified by marking and tagging
per MSS SP 25.
End-of-Line Service
Lug body valves may be used in end-of-line service, with
downstream piping removed. (Weld neck or socket flanges,
only, can be used for this service.) Since upstream pressure is
excluded between the flange and the seat face by the exclusive
Demco flange seal, there is no effective force to slide the seat
downstream. Demco Lug Butterfly Valves are recommended
for liquid service up to 200 psi with downstream piping
CONTENTS MENU removed.
Lug body valves are recommended for isolation of pumps,
control devices or other system components which may need
to be removed for repair or replacement. Lug valves are also
suitable for installation at points from which piping expansions
may proceed. Such valves are normally blanked with blind
flanges, to protect the exposed seats, until new piping is
attached.
TECHNICAL DATA
Actuation
Positive latch handles, worm gear operators and automatic
actuators are available and totally interchangeable on the
Demco valve.
The Demco top flange is dimensionally compatible with other
competitive butterfly valves. With optional utility top stem, the
Demco valve interchanges directly with competitive valves, allowing valve replacement without the need for new actuation.
CONTACT
www:
CONTACT
HELP
(p226)
E N E R A L
E C H N I C A L
DEMCO
N F O R M A T I O N
CONTACT
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
HELP
(p227)
E N E R A L
E C H N I C A L
DEMCO
N F O R M A T I O N
Dimension
CONTACT
CONTENTS MENU
2"
21/2"
3"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
2.07
2.44
2.65
3.62
4.12
3.12
33/4
63/4
65/8
23/4
21/4
1.467
3.25
2.75
2.33
70%
4
8
2.47
2.94
3.15
4.12
4.87
3.62
41/8
73/8
73/16
27/8
213/16
2.144
3.62
2.87
3.92
82%
4
8
3.07
3.57
3.78
5.00
5.37
4.25
41/4
73/8
71/8
27/8
35/16
2.743
3.75
2.87
5.93
80%
4
8
4.03
4.57
4.78
6.18
6.87
5.25
43/4
81/8
77/8
31/8
43/16
3.601
4.00
3.12
10.01
79%
8
16
5.05
5.66
5.84
7.31
7.75
6.31
51/8
91/4
815/16
31/4
51/16
4.582
4.12
3.25
14.98
73%
8
16
6.07
6.72
7.03
8.50
8.75
7.46
53/8
91/4
87/8
31/4
61/16
5.624
4.25
3.25
22.09
76%
8
16
7.98
8.72
8.96
10.62
11.00
9.43
61/16
109/16
103/16
39/16
715/16
7.428
4.81
3.56
39.43
79%
8
16
10.02
10.88
11.09
12.75
13.37
11.56
65/8
103/4
105/16
41/4
10
9.382
5.12
4.25
61.52
78%
12
24
12.00
12.88
13.09
15.00
16.12
13.56
75/8
121/4
1113/16
43/4
1115/16
11.35
5.75
4.75
89.54
80%
12
24
13.25
14.14
14.14
16.25
17.20
15.14
71/2
13
41/2
135/32
12.86
5.75
4.50
111.2
82%
12
24
15.25
16.16
16.16
18.50
19.27
17.04
9
14
51/2
157/32
14.72
6.87
5.50
150.5
85%
16
32
17.25
18.18
18.18
21.00
21.43
19.06
913/16
157/16
515/16
175/32
16.61
7.56
5.94
186.1
83%
16
32
19.25
20.20
20.20
23.00
23.60
21.08
1011/16
165/16
67/16
195/32
18.53
8.31
6.43
238.1
87%
20
40
5/8"
5
11/2
51/2
11/2
51/2
11/2
53/4
13/4
61/2
13/4
61/2
2
7
21/4
-9
7/8"
71/2
21/4
-9
7/8"
81/4
21/2
1"-8
81/4
21/2
10
31/4
101/2 113/4
31/2
4
Dimension
24"
TECHNICAL DATA
A Standard Flange ID
(Except Slip On)
B Seal Diameter
C Raised Face Diameter
D Valve Body Diameter
E Seat OD
FEnd-to-End Weld End,
ANSI
GSeat ID
H Disc Chord
J Outside-to-Outside,
ANSI
Number of Studs
Number of Cap Screws
Size of Cap
Screws -Threads per in.
Length of Studs
Length of Cap Screws
www:
CONTACT
HELP
Studs
Studs
Studs
Studs
36"
42"
48"
**
64
sq. m.
352.4
Throughput
Area
% std. pipe 88%
** 24
** 28
32
36
30"
*
4
**
41/2
546
81%
800
82%
1079
81%
1447
83%
(p228)
E N E R A L
E C H N I C A L
DEMCO
N F O R M A T I O N
Valve Size
2"
21/2"
3"
4"
90
145
225
325
590
80
115
175
260
510
75
95
135
215
410
830
6,700
70
70
105
160
305
625
5,100
7,100
60
53
83
125
235
490
800
4,100
5,100
7,100
50
27
42
63
120
250
410
700
2,200
2,650
3,700
4,600
6,100
9,700 15,000
40
17
26
38
73
155
250
420
670
1,000
1,300
1,700
2,300
2,800
3,800
6,000
9,200
30
15
22
42
88
145
250
390
550
750
900
1,250
1,600
2,200
3,500
5,300
25
10
15
28
60
98
170
260
380
500
650
900
1,125
1,500
2,300
3,500
5"
6"
10"
12"
14"
16"
18"
20"
24"
30"
36"
CONTACT
Water Hammer
Water hammer is a series of shocks in a piping system caused
by rapidly stopping the flow of fluid in that system. Although it
is difficult to measure pressure spikes caused by water hammer
shock with ordinary equipment, maximum obtainable pressures
caused by instantaneous valve closure can be approximated by
the following formula:
Q = CV x
Where:
Q = Gallons per minute of flow through the valve.
CONTENTS MENU DP = Pounds per square inch pressure drop across the valve.
D = Density of fluids in pounds per cubic foot.
Q2 x D
CV2 x 62.4
www:
DP x 62.4
D
Q = CV x
CONTACT
Time seconds =
0.5 x 62.4
D
= 305 x
0.14 Q
S (P)
Where:
= 305
0.707
DP =
Flow in gpm.
Upstream pipe size in sq. ft.
Pressure rating of the valve in psi.
Q2 x D
CV2 x 62.4
(2000)2 x 55
(3250)2 x 62.4
HELP
D P = 0.33 pounds per square inch
(p229)
E N E R A L
E C H N I C A L
N F O R M A T I O N
DEMCO
Cavitation Data
Torque
The torque (turning effort) required to operate a given butterfly valve is determined by two factors: friction of disc and seat
due to interference, and dynamic forces of flow through the
valve which tend to open or close the valve. Actuator torque
output must meet or exceed the maximum torque requirement
of the valve.
Normal Wet Opening Torque requirements due to interference are tabulated below. Dry service will increase opening
torque significantly. Consult factory for dry service torque
requirements.
The disc of a butterfly valve, in partially opened condition,
is subject to lift forces from passage of fluid over its surfaces.
This effect is analogous to an airplane wing and results in an
unbalanced turning force on the disc. Dynamic torque is proportional to pressure drop through the valve and may become
significant in some applications.
Dynamic torque typically is a maximum at about 70 disc
opening. Under high differential pressure conditions, such
torque may exceed the design strength of stems, connections or
actuators. The curves at right may be used to calculate dynamic
torque for Demco Butterfly Valves and should be consulted in
any case where high differential pressure may occur during
operation of a valve.
CONTACT
DPmax = KC ( P 1 P V )
Where:
DPmax = Differential pressure across the valve.
= Cavitation constant
KC
CONTENTS MENU
P1
PV
Example:
What is the maximum pressure drop possible through a butterfly valve at 100 PSIG inlet pressure with water at 68F (.339
PSIA vapor pressure)?
TECHNICAL DATA
www:
CONTACT
Valve Size
Description
2"
21/2"
3"
4"
225
326
510
765
1190 1530 2550 4125 7000 13150 17500 21500 26600 5000
132
192
300
450
700
900
50 psi shutoff
108
108
192
264
450
550
4500
6500
Throttling*
72
72
90
108
144
180
350
1660
2800
3400
HELP
5"
6"
8"
10"
700
12"
14"
1160
16"
18"
20"
5000
24"
8400
30"
36"
(p230)
T A N D A R D
A T E R I A L
DEMCO
A T A
Bodies
Description
NE-C
NF-C
14-24
NF-C
30 & 36
Lug
Lug
Wafer/Lug
NF-C
42 & 48
NE-I
NE-D
Wafer
Wafer
NE-I
Sanitary
NEI-T
Ductile Iron
ENC Coated
A48 (Class 20)
Gray Iron
CONTACT
Wafer
Wafer/Lug
Wafer/Lug
Wafer/Lug
Wafer
Wafer
Bronze
B148 (952)
C/F
Flange
Wafer/Lug
Lug
Wafer/Lug Wafer/Lug
Steel
A216 (WCB)
Wafer/Lug
Wafer/Lug
Stainless Steel
A351 (CF8M)
Wafer/Lug
Wafer/Lug Wafer/Lug
Aluminum
B179 (ZC-81A)
Wafer
Wafer
Wafer
NE-I
Sanitary
NEI-T
Discs
Description
NE-C
NF-C
14-24
NF-C
30 & 36
NF-C
42 & 48
NE-I
NE-D
NF-C
42 & 48
NE-I
NE-D
A536 (65-45-12)
Ductile Iron/
SS Edge
A536 (65-45-12)
Ductile Iron/
PVF Coated
A536 (65-45-12)
CONTENTS MENU
B148 (954)
Aluminum Bronze
B148 (955)
316 SS
A743 (CF8M)
Monel
QQ-N-288
Alloy 20,
29 NI-20 Cr
A743 (CN-7M)
Hastelloy C
61 NI-17 Mo-17 Cr
A494 (CW-2M)
TECHNICAL DATA
www:
Stems
CONTACT
Description
NE-C
NF-C
14-24
NF-C
30 & 36
NE-I
Sanitary
NEI-T
AISI C1213/15
416 SS
QQ-S-764-B
316 SS
AMS 5648 B
17-4 PH SS
AMS 5643
Monel
B164 (Class A)
HELP
(p231)
T A N D A R D
A T E R I A L
DEMCO
A T A
Seats
VITON 1 is excellent at elevated temperatures and also in harsh
chemical environments. Viton is not suitable for hot water or steam.
+20F to +300F
Same as Fluoroelastomer
See pages 210 and 211 for seat material description and part
number scheme for available options for different valve series.
Buna N is a general purpose elastomer compounded for maximum hydrocarbon or petroleum resistance.
0F to +180F
Same as Nitrile, Hycar 1, NBR
CONTACT
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
HELP
1 See material trademark on page 226.
(p232)
E R M S
A N D
O N D I T I O N S
1. CONTRACT ACCEPTANCE:
differences with workmen, local labor shortages, fire, flood, shortages or failure of raw
materials, supplies, fuel, power or transportation, breakdown of equipment or any other
causes beyond Sellers reasonable control,
whether of similar or dissimilar nature than
those enumerated. Seller shall have additional
time within which to perform as may be reasonably necessary under the circumstances and
shall have the right to apportion its production among its customers in such a manner as
it may consider to be equitable. Seller reserves
the right to furnish commercially equivalent or
better substitutes for materials or to subcontract the Buyers order or portions thereof as
Seller deems necessary. In no event shall Seller
be liable for any consequential damages for
labor resulting from failure or delay in shipment. If Buyer requires drawings, procedures,
standards or similar material for approval,
shipping schedules will be calculated from
the time such approvals are received by Seller,
since shipping schedules are based on Seller
having all required information and a firm
order from Buyer which is enterable into production. Any hold points, witness points or the
need for inspection by Buyers representatives
must be identified by Buyer at the time of
quotation (if any) and/or order placement in
order that the effect on the prices or shipping
schedules (if any) can be taken into account.
Additional inspection or testing required by
Buyer which affects normal production
sequence will be considered as extending
the shipping dates accordingly.
CONTACT
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
5. MINIMUM BILLING:
Seller reserves the right to impose a minimum
billing charge on all sales, change orders or
order supplements.
6. TERMS OF PAYMENT:
Terms of payment for all materials and service
are 30 days from invoice date, at net price,
provided satisfactory credit has been established. All unpaid invoices are subject to the
maximum legal interest rate per annum
commencing with the due date.
3. TAXES:
Any tax or other charge imposed by law on
the sale or production of goods or the performance of services shall be paid by the Buyer,
unless the law specifically provides that such
payment must be made by Seller, in which case
Buyer shall reimburse Seller for such payment
as part of the purchase price. Custom duties,
consular fees, insurance charges and other
comparable charges will be borne by Buyer.
8. WARRANTIES:
All products of Sellers manufacture are warranted against defects of material and workmanship for a period of twelve (12) months
from the date of installation or eighteen (18)
months from date of shipment, whichever
period first expires, when such products are
used in the service and within the pressure
range for which they were manufactured. In
the case of products or parts not wholly of
Sellers manufacture, Sellers liability shall be
limited to the extent of its recovery from the
manufacturer of such products or parts under
its liability to Seller.
HELP
Any repair work performed by Seller is warranted for one year from completion of such
repairs and applies only to work performed.
If, within these specified periods, Seller
receives notice from Buyer of any alleged
defect in or nonconformance of any product
or repair and if in the Sellers sole judgment
the product or repair does not conform or
is found to be defective in material or workmanship, then, Buyer shall, at Sellers request,
return the part or product F.O.B. to Sellers
designated plant or service location. Seller,
at its option and expense, shall repair or
replace the defective part or product, or
repay to Buyer the full price paid by Buyer
for such defective part, repair or product.
Any repayment of purchase price shall be
without interest.
Sellers warranty liability, including defects
caused by Sellers negligence, shall be limited
to such repair, replacement or refund, and
shall not include claims for labor costs, expenses of Buyer resulting from such defects, recovery under general tort law or strict liability or
for damages resulting from delays, loss of use,
or other direct, indirect, incidental or consequential damages of any kind. Seller will not
be responsible for failures of products which
have been in any way tampered with or
altered by anyone other than an authorized
representative of Seller, failures due to lack of
compliance with recommended maintenance
procedures or products which have been
repaired or altered in such a way (in Sellers
judgment) as to affect the products adversely.
THIS WARRANTY IS EXPRESSLY IN LIEU OF
ALL OTHER WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, INCLUDING THE WARRANTY
OF MERCHANTABILITY AND FITNESS FOR
PARTICULAR PURPOSE WHICH EXCEED THE
FOREGOING WARRANTY.
9. NUCLEAR SALES:
The products sold hereunder are not designed
or manufactured for use in or with any atomic
installation or activity. If the Buyer or ultimate
user of these products intends to use them in
such an installation or activity, Sellers Nuclear
Terms of Sale shall be part of and control this
contract. Seller will furnish Buyer with a copy
of its Nuclear Terms of Sale upon request.
(p233)
E R M S
A N D
O N D I T I O N S
CONTACT
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
14. INSPECTION:
Unless otherwise agreed in writing, final
inspection and acceptance of products must
be made at Sellers plant or other shipping or
receiving point designated by Seller and shall
be conclusive except as regards latent defects.
Buyers representatives may inspect at the
Sellers plant or shipping point during working
hours prior to shipment in such manner as will
not interfere with operations.
A. INDEMNIFICATION:
Seller agrees to indemnify Buyer and hold
Buyer harmless against any claims, demands
or causes of action for property damage or
personal injury (including death) caused by
15. TITLE:
HELP
the negligent act or omission of any employee, agent or subcontractor of Seller and not
contributed to by the negligence of Buyer,
its employees, its agents or any third party.
Seller shall not be responsible for the acts and
workmanship of employees, agents, contractors
or subcontractors of Buyer or any third party,
nor for failure or malfunction of any tools,
materials, equipment, products, supplies,
facilities or devices not manufactured and
supplied by Seller. Buyer agrees to hold Seller
harmless from any and all losses, claims, or
damages arising from subsurface damage,
surface damage caused by subsurface damage,
loss of hydrocarbons and from pollution,
regardless of whether such damages, losses or
claims were caused by the negligence or sole
negligence of Seller, it being the intent of the
parties that this indemnity shall apply to property of Buyer or to that of any third party.
B. LIMITATION OF LIABILITY:
UNDER NO CIRCUMSTANCES SHALL SELLER BE
LIABLE FOR ANY SPECIAL, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, INCLUDING, BUT NOT
LIMITED TO LOSS OF ANTICIPATED PROFITS,
LOSS OF USE OF EQUIPMENT OR OF ANY
INSTALLATION, SYSTEM OR FACILITY INTO
WHICH SELLERS EQUIPMENT MAY BE LOCATED OR AT WHICH SELLER, ITS AGENT OR SUBCONTRACTOR MAY BE PERFORMING WORK.
Sellers total responsibility for any claims,
damages, losses or liabilities arising out of or
related to its performance of this contract or
the products or services covered hereunder
shall not exceed the purchase price.
(p234)
R A D E M A R K
N F O R M A T I O N
CONTACT
References in this catalog to registered trademarks or product
designations, which are not owned by Cooper Cameron
Corporation are as follows:
Celcon
Delrin
Fluorel
Hastelloy
Hycar
Hydrin
Hypalon
Inconel
Monel
Nordel
Stellite
Teflon
Viton
CONTENTS MENU
TECHNICAL DATA
www:
CONTACT
HELP
(p235)
This interactive
button allows you to
view the video within
that introduction
page
This button takes you to the
main contents menu
go to start
page
next
page
back one
step
previous
page
go to end
page
full page
and
closeup
forward
options
one step
Selecting an item
from the contents
will take you to the
relevant page
search &
find