Professional Documents
Culture Documents
Sauer Danfoss
Sauer Danfoss
Table of Revisions
Date
Nov 2009
Sep 2010
Feb 2011
Jun 2011
Feb 2012
Page
Many
88
4-5, 13
33
80
Changed
Steering column deleted
New back cover
Typos
Flow range
Max pressure options changed
Rev
BA
BB
BC
BD
BE
F500 026
T301033
Conversion
Conversion Factors
Factors
1 Nm
1N
1 bar
1 mm
=
=
=
=
[8.851 lbfin]
[0.2248 lbf ]
[14.50 psi]
[0.0394 in]
1 cm3
1l
F
=
=
=
T301034
[0.061 in3]
[0.264 US gal]
[1.8C + 32]
T301035
Detailed data on all Sauer-Danfoss steering components and accessories can be found in
our steering component catalogues, which is divided in to 6 individual sub catalogues:
General information
Steering components
OSPM
T301036
Load sensing
In load sensing steering systems both the steering system and the working hydraulics
can be supplied with oil from the same pump, using a load sensing pump, also delivers
the potential for energy saving.
Load sensing steering units have an extra connection for load sensing (LS), so that a load
pressure signal can be directed via the steering unit to a Sauer-Danfoss priority valve
and/or an LS pump. The load sensing signal controls the oil flow from the priority valve
(and/or the LS pump) to the steering unit. The LS connection is open to tank when the
steering unit is in the neutral position.
Load sensing static
Load sensing static steering units require load sensing static priority valves and/or load
sensing static variable displacement pumps. Load sensing static steering systems have
no oil flow in the LS connection when the steering unit is in neutral position.
Load sensing dynamic
Load sensing dynamic steering units require load sensing dynamic priority valves and/
or load sensing dynamic variable displacement pumps. Load sensing dynamic steering
systems have a constant oil flow in the LS connection in the direction of the steering unit
even when the steering unit is in neutral position.
Reaction
With reaction steering units any external forces acting on the steered wheels result in
a corresponding movement of the steering wheel when the driver is not steering the
vehicle.
Non-reaction
With non-reaction steering units there is no corresponding movement of the steering
wheel when the driver is not steering the vehicle
OSPB LS: Steering unit with no valve functions
Sauer-Danfoss
diagram
LS
T
R
L
CETOP
diagram
F300614
OSPB LS (OLS)
Load sensing static
non-reaction
and load sensing
dynamic nonreaction
LS
150-301.11
F300724
F300614
LS
LS R
LS
LS R
150-596.10
150-595.11
OSPC LS (OLS)
Load sensing dynamic non-reaction
OSPC LS (OLSA)
Load sensing dynamic non-reaction
F300617
LS
LS
T
R
T LS
150-598.11
T
R
T LS
150-597.11
OSPF LS (OLS)
Load sensing dynamic non-reaction
F300612
F300615
LS
P
T
R
LS
150-599.11
LS
LS
150-600.11
OSPD LS (OLS)
Load sensing dynamic non-reaction
10
OSPQ LS (OLS)
Load sensing dynamic non-reaction
OSPL LS:
Steering unit load sensing for high steering flow, displacement larger than 500 cm3/rev
[30.5 in3/rev].
F300611
OSPL LS (OLS)
Load sensing static
non-reaction
OSPL LS (OLS)
Load sensing dynamic
non-reaction
LS
LS
LS
LS
T
150-601.10
150-301.11
LS
R
F301 082
LS
150-613.10
11
OSPBX LS, OSPCX LS and OSPLX LS: Steering units load sensing for flow amplifiers.
OSPBX LS, OSPCX LS and OSPX LS are load sensing steering units with the L and the R
connections open to tank when in neutral position. OSPBX LS, OSPCX LS and OSPX LS
can only be used with Sauer-Danfoss flow-amplifiers OSQA or OSQB. OSPBX LS, OSPCX
LS and OSPX LS steering units must not be connected directly to the steering cylinder.
OSPCX LS is for OSQ dynamic without pilot pressure relief valve.
F300614
LS
P
LS
T
R
LS
P
LS
150-310.12
12
T
150-602.10
OSPCX LS
Load sensing dynamic
Steering unit
OSPB 50 LS
OSPB 80 LS
OSPB 100 LS
OSPB 125 LS
OSPB 160 LS
OSPB 200 LS
OSPB 315 LS
OSPB 400 LS
Code Numbers
Connections
European version for OLS
US version for OLS
G 1/2
3/4-16 UNF - O*
G 1/4 - S**
7/16-20 UNF - O* + S**
150G6085
150G6086
150G6087
150G6088
150G6089
150-0103
150G6090
150-0104
150-0116
150-0105
150-0117
Weight
kg [lb]
5.2 [11.46]
5.3 [11.68]
5.4 [11.90]
5.5 [12.13]
5.6 [12.35]
5.8 [12.79]
6.2 [13.67]
7.0 [15.43]
13
Steering unit
OSPB 50 LS
OSPB 80 LS
OSPB 100 LS
OSPB 125 LS
OSPB 160 LS
OSPB 200 LS
OSPB 315 LS
OSPB 400 LS
Code Numbers
Connections
US version for OLS
3/4-16 UNF - O*
7/16-20 UNF - O* + S**
150-8204
150-8205
150-8206
150-8207
150-8208
150-8209
150-8210
150-8211
Weight
kg [lb]
5.2 [11.46]
5.3 [11.68]
5.4 [11.90]
5.5 [12.13]
5.6 [12.35]
5.8 [12.79]
6.2 [13.67]
7.0 [15.43]
14
Weight
OSPC 80 LS
OSPC 100 LS
OSPC 125 LS
OSPC 160 LS
European
for OLS
G 1/2
G 1/4 - S**
150-1230
150-1231
150-1232
150-1233
OSPC 200 LS
150-1234
OSPC 315 LS
150-1235
150G6091
6.2 [13.67]
OSPC 400 LS
150-1240
7.0 [15.43]
Steering unit
kg [lb]
5.3 [11.68]
5.4 [11.90]
5.5 [12.13]
5.6 [12.35]
5.8 [12.79]
If you require other port connections, valve combinations and/or other valve settings
or other displacements, please fill in the order form on page 24 and contact the SauerDanfoss Sales Organization.
15
Valve settings
Relief
valve
Shock
valve
Weight
kg [lb]
200
[2900]
OSPC 50 LS
150-8233
150-8222
150-8215
OSPC 80 LS
OSPC 100 LS
OSPC 125 LS
OSPC 160 LS
150-8234
150-8235
150-8236
150-8237
150-8223
150-8224
150-8225
150-8226
150-8216
150-8217
150-8218
150-8219
OSPC 200 LS
150-8238
150-8227
150-8220
OSPC 315 LS
150-8239
150-8221
6.2 [13.67]
OSPC 400 LS
150-8240
7.0 [15.43]
170
[2465]
225
[3263]
5.2 [11.46]
5.3 [11.68]
5.4 [11.90]
5.5 [12.13]
5.6 [12.35]
5.8 [12.79]
If you require other port connections, valve combinations and/or other valve settings
or other displacements please fill in the order form on page 24 and contact the SauerDanfoss Sales Organization.
16
Steering unit
OSPC 80 LSR
OSPC 200 LSR
Code numbers
Connections
European version for OLS
G 1/2 - S**
G 1/4 - S**
150-8241
150-8242
Valve settings
Weight
Relief valve
bar [psi]
Shock valve
bar [psi]
kg [lb]
170 [2465]
225 [3263]
5.3 [11.68]
5.8 [12.79]
If you require other port connections, valve combinations, valve settings and/or other
displacements, please fill in the order form on page 24 and contact the Sauer-Danfoss
Sales Organization.
17
Steering unit
OSPF 80 LS
OSPF 100 LS
OSPF 125 LS
OSPF 160 LS
OSPF 200 LS
OSPF 315 LS
OSPF 400 LS
Code numbers
Connections
European version for OLS
G 1/2 - S**
G 1/4 - S**
150G5079
150G5080
150G5081
150G5082
150G5083
150G5084
150G5085
Valve settings
Relief valve
bar [psi]
170 [2465]
Weight
Shock valve
bar [psi]
kg [lb]
225 [3263]
5.3 [11.68]
5.4 [11.90]
5.5 [12.13]
5.6 [12.35]
5.8 [12.79]
6.2 [13.67]
7.0 [15.43]
If you require other port connections, valve combinations, valve settings and/or other
displacements, please fill in the order form on page 24 and contact the Sauer-Danfoss
Sales Organization.
18
Steering unit
OSPD 70/230 LS
OSPD 70/270 LS
OSPD 70/385 LS
OSPD 125/325 LS
OSPD 125/440 LS
Code numbers
Connections
European version
G 1/2 - S**
G 1/4 - S**
150G8112
150G8113
150G8114
150G8128
150G8129
Valve settings
Relief valve
bar [psi]
170 [2465]
Weight
Shock valve
bar [psi]
kg [lb]
225 [3263]
7.7 [17.00]
7.9 [17.41]
8.4 [18.52]
8.1 [12.79]
8.6 [18.96]
S**: Spot face around port connections (can not be used in connection with OVR angular block)
If you require other port connections, valve combinations, valve settings and/or other
displacements, please fill in the order form on page 24 and contact the Sauer-Danfoss
Sales Organization.
19
Steering unit
OSPQ 80/125 LS
OSPQ 125/250 LS
OSPQ 160/320 LS
Code numbers
Connections
European version
M 18 x 1.5 - O* + S**
M 12 x 1.5 - O* + S**
150G8012
150G8011
150G8030
Valve settings
Weight
Relief valve
bar [psi]
Shock valve
bar [psi]
kg [lb]
170 [2465]
225 [3263]
5.3 [11.68]
5.5 [12.79]
5.6 [12.35]
If you require other valve combinations, valve settings and/or other displacements,
please fill in the order form on page 24 and contact the Sauer-Danfoss Sales
Organization.
20
Steering unit
European version
for OLS
G 1/2
G 1/4 - S**
OSPL 520 LS
OSPL 630 LS
OSPL 800 LS
OSPL 1000 LS
150-7169
150-7107
150-7108
150-7110
Code numbers
Connections
US version for
OLS
3/4-16 UNF - O*
7/16-20 UNF - O*
+ S**
150-7167
150-7164
150-7165
150-7166
Weight
US version for
OLS and OVPL LS
- port
7/16-20 UNF - O*
+ S**
150-7168
150-7113
150-7114
150-7115
kg [lb]
8.1 [17.86]
8.4 [18.52]
8.8 [19.40]
10.0 [22.05]
Steering unit
OSPL 520 LS
OSPL 630 LS
OSPL 800 LS
OSPL 1000 LS
O*: O-ring chamfer on port connections
Weight
kg [lb]
8.1 [17.86]
8.4 [18.52]
8.8 [19.40]
10.0 [22.05]
OSPL LS Dynamic steering units in the table below incorporate all the following valve
function: pilot pressure relief valve
Steering unit
OSPL 520 LS
OSPL 1000 LS
Code numbers
Connections
European version
for OLS and OVPL
LS: G 1/4 - S**
150-8244
150-8245
Valve settings
Weight
Relief valve
bar [psi]
kg [lb]
170 [2465]
8.1 [17.86]
10.0 [22.05]
If you require other displacements or other valve setting, please fill in the order form on
page 24 and contact the Sauer-Danfoss Sales Organization.
21
OSPL 1200 LS Dynamic steering unit in the table below incorporate all the following
valve function:
shock valves
suction valves
OSPL 1200 LS in the table below has strong neutral setting springs, see page 24
Priority valve
OSPL 1200 LS
Code numbers
Connections
US version for OLS
3/16 - 16 UNF - O*
CF: 11/16 - 12 UN
7/16 - 20 UNF - O* + S**
150-7175
Valve settings
Shock valves
bar [psi]
280 [4061]
Weight
kg [lb]
11 [24.25]
If you require other displacements or other valve setting, please fill in the order form on
page 24 and contact the Sauer-Danfoss Sales Organization.
22
OSPBX and OSPLX load sensing static steering units for OSQ static
OSPBX LS and OSPLX LS Static steering units in the table below have no valve functions.
OSPBX LS in the table below have all standard neutral setting springs, see page 24
OSPLX LS in the table below have all strong neutral setting springs, see page 24
Code numbers
Connections
European version
US version
G 1/2
3/4-16 UNF - O*
G 1/4 - S**
7/16-20 UNF - O* + S**
150-1082
150-1078
150-1083
150-1079
150-1084
150-1080
150-1085
150-1081
150-7170
150-7173
150-7171
150-7174
150-7172
150-7155
Steering unit
OSPBX 160 LS
OSPBX 200 LS
OSPBX 315 LS
OSPBX 400 LS
OSPLX 520 LS
OSPLX 630 LS
OSPLX 800 LS
Weight
kg [lb]
5.6 [12.35]
5.8 [12.79]
6.2 [13.67]
7.0 [15.43]
8.1 [17.86]
8.4 [18.52]
8.8 [19.40]
Steering unit
OSPCX 160 LS
Code numbers
Connections
European version
for OLS and OVPL
G - S**
G - S**
150-8188
Valve settings
Weight
Relief valve
bar [psi]
kg [lb]
200 [2900]
5.6 [12.35]
If you require other displacements or other valve setting, please fill in the order form on
page 24 and contact the Sauer-Danfoss Sales Organization.
23
Fill in your company data and place xs in the table where appropriate, then send to your
Sauer-Danfoss Sales Organisation.
Name
Your
company
Vehicle
OSPC
Steering unit
type
OSPF
DP, cm3/rev
OSPC LS
OSPF LS
40
40
DP, cm3/rev
OSPD LS
60/185
60
70
50
60/220
80
100
60
60/260
125
70
70/195
70/230
80/140
80/160
70/270
185
100
70/385
200
100/180
80/160
230
125
OSPCX
250
160
315
400
185
200
70/195
100/160
80/140
160
80
60/220
80/125
DP, cm3/rev
OSPQ LSR
OSPLX
Dynamic
80/125
DP, cm3/rev
OSPQ LS
OSPL
60/185
DP, cm3/rev
OSPD LSR
OSPQ
Date
50
DP, cm3/rev
OSPC LSR
OSPD
Completed by
LS ( Non-reaction)
Reaction
type
Load
Sensing type
Potential pcs/year
70/230
100/200
125/200
100/160
100/200
125/250
100/180
160/250
160/320
100/200
125/200
DP, cm3/rev
OSPL, OSPLX
520
630
800
1000
DP, cm3/rev
OSPCX
160
200
250
315
400
Port threads
OSPC, OSPF
G1/2
G1/2- S**
3/4-16 UNF - O*
Port threads
OSPL, OSPLX
Relief valve***
bar
Shock valves
bar
G1/2
3/4-16 UNF - O*
70
80
90
160
Neutral
setting
springs
3/4-16 UNF - O*
110
120
140
200
170
225
190
200
240
210
no relief valve
280
no shock valves
Yes
No
Soft:
0.5 - 1.8 Nm in normal steering situations
Standard:
0.8 - 3 Nm in normal steering situations
Yes
Unit black
painted
24
100
180
Suction
valves
Check valve
in LS
G1/2- S**
Port threads
OSPD
Strong:
1.5 - 4 Nm in normal steering situations
No
An alternative way to specify a variant is to state an existing code number and add the
modifications, you would like to have implemented in the basic steering unit.
Code number of basic steering unit:
Requested modifications:
25
The following combinations of port threads and valves are available for OSPC LS/LSR:
Housings for low flow: 40 - 200 cm3/rev [2.44 - 12.20 in3/rev] gear wheel set.
Threads
Valves
Main ports
(P, T, L, R)
LS-port
For
steering
column
DIN 3852-2
G 1/2
DIN 3852-2
G 1/4 w. spot face
M10 x 1.5
DIN 3852-2
G 1/2 w. spot face
DIN 3852-2
G 1/4 w. spot face
M10 x 1.5
ISO 6149-1
M18 x 1.5,
w. O-ring chamfer
and spot face
ISO 6149-1
M12 x 1.5,
w. O-ring chamfer
and spot face
ISO 11926-1
7/16 - 20 UNF
O-ring boss port
and spot face
ISO 11926-1
7/16 - 20 UNF
O-ring boss port
and spot face
3/8 - 16 UNC
For OLSA
ISO 11926-1
3/4 - 16 UNF,
O-ring boss port
ISO 11926-1
3/4 - 16 UNF,
O-ring boss port
For OLSA
Pilot
pressure
relief valve
Yes
Yes
Yes
Yes
Shock
valves
Suction
valves
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Check valve in
LS (only for LS
Dynamic)
Yes
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
No
No
No
M10 x 1.5
Yes
Yes
Yes
Yes
M10 x 1.5
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
No
Yes
No
No
M10 x 1.5
The following combinations of port threads and valves are available for OSPC LS/LSR:
Housings for high flow: 250 - 400 cm3/rev [15.25 -24.4 in3/rev] gear wheel set.
Threads
Main ports
(P, T, L, R)
LS-port
DIN 3852-2
G1/2
DIN 3852-2
G 1/4 w. spot face
DIN 3852-2
G 1/2 w. spot face
DIN 3852-2
G 1/4 w. spot face
ISO 11926-1
3/4 - 16 UNF,
O-ring boss port
ISO 11926-1
7/16 - 20 UNF
O-ring boss port
and spot face
ISO 11926-1
3/4 - 16 UNF,
O-ring boss port
For OLSA
ISO 11926-1
7/16 - 20 UNF
O-ring boss port
and spot face
For OLSA
Valves
For
steering
column
Pilot
pressure
relief valve
Yes
M10 x 1.5
No
Yes
M10 x 1.5
Yes
Yes
Yes
3/8 - 16 UNC
No
No
Shock
valves
Suction
valves
Yes
Yes
Yes
No
Yes
No
Yes
Yes
Yes
Yes
Yes
No
Yes
No
Yes
No
Check valve in
LS (only for LS
Dynamic)
No
No
No
Yes
No
No
No
No
Yes
Yes
Yes
No
Yes
No
No
No
Yes
Yes
Yes
No
M10 x 1.5
M10 x 1.5
Housings with spot face around port connections on main ports cannot be used in
connection with OVR angular block.
26
The following combinations of port threads and valves are available for OSPF LS:
Threads
Main ports
(P, T, L, R)
DIN 3852-2
G 1/2
DIN 3852-2
G 1/2 w. spot face
ISO 6149-1
M18 x 1.5,
w. O-ring chamfer
and spot face
ISO 11926-1
3/4 - 16 UNF,
O-ring boss port
ISO 11926-1
3/4 - 16 UNF,
O-ring boss port
LS-port
DIN 3852-2
G 1/4 w. spot face
DIN 3852-2
G 1/4 w. spot face
ISO 6149-1
M12 x 1.5,
w. O-ring chamfer
and spot face
ISO 11926-1
7/16 - 20 UNF
O-ring boss port
and spot face
ISO 11926-1
7/16 - 20 UNF
O-ring boss port
and spot face
Valves
For
steering
column
Pilot
pressure
relief valve
Shock
valves
Suction valves
M10 x 1.5
Yes
Yes
Yes
M10 x 1.5
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
3/8-16 UNC
Yes
Yes
Yes
M10 x 1.5
Yes
Yes
Yes
M10 x 1.5
The following combinations of port threads and valves are available for OSPD LS/LSR:
Threads
Main ports
(P, T, L, R)
DIN 3852-2 G w.
spot face
ISO 6149-1
M18 x 1.5,
w. O-ring chamfer
and spot face
ISO 11926-1
- 16 UNF,
O-ring boss port
LS-port
DIN 3852-2 G w.
spot face
ISO 6149-1
M12 x 1.5,
w. O-ring chamfer
and spot face
ISO 11926-1
7/16 - 20 UNF
O-ring boss port
and spot face
Valves
For
steering
column
Pilot
pressure
relief valve
Shock
valves
Suction
valves
Check valve in
LS (only for LS
Dynamic)
M10 x 1.5
Yes
Yes
Yes
Yes
M10 x 1.5
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
M10 x 1.5
27
The following combinations of port threads and valves are available for OSPQ LS/LSR:
Threads
Valves
Main ports
(P, T, L, R)
LS-port
For
steering
column
ISO 6149-1
M18 x 1.5,
w. O-ring chamfer
and spot face
ISO 6149-1
M12 x 1.5,
w. O-ring chamfer
and spot face
M10 x 1.5
Pilot
pressure
relief valve
Shock
valves
Suction
valves
Check valve in
LS (only for LS
Dynamic)
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Housings with spot face around port connections on main ports cannot be used in
connection with OVR angular block.
For OSPL, OSPBX, OSPCX and OSPLX only the versions listed in the tables with code
numbers are available.
28
Displacement, flow and pressure: OSPB LS, OSPC LS, OSPC LSR
Common data: Look in sub catalogue: General Steering Components
Steering unit
OSPC 40 LS Static
OSPB/OSPC 50 LS Static
OSPC 60 LS Static
OSPC 70 LS Static
OSPB/OSPC 80 LS Static
OSPB/OSPC 100 LS Static
OSPB/OSPC 125 LS Static
OSPB/OSPC 160 LS Static
OSPC 185 LS Static
OSPB/OSPC 200 LS Static
OSPC 230 LS Static
OSPC 250 LS Static
OSPB/OSPC 315 LS Static
OSPB/OSPC 400 LS Static
OSPC 40 LS Dynamic
OSPB/OSPC 50 LS Dynamic
OSPC 60 LS Dynamic
OSPC 70 LS Dynamic
OSPB/OSPC 80 LS Dynamic
OSPB/OSPC 100 LS Dynamic
OSPB/OSPC 125 LS Dynamic
OSPB/OSPC 160 LS Dynamic
OSPC 185 LS Dynamic
OSPB/OSPC 200 LS Dynamic
OSPC 230 LS Dynamic
OSPC 250 LS Dynamic
OSPB/OSPC 315 LS Dynamic
OSPB/OSPC 400 LS Dynamic
OSPC 40 LSR Dynamic
OSPC 50 LSR Dynamic
OSPC 60 LSR Dynamic
OSPC 70 LSR Dynamic
OSPC 80 LSR Dynamic
SPC 100 LSR Dynamic
OSPC 125 LSR Dynamic
OSPC 160 LSR Dynamic
OSPC 185 LSR Dynamic
OSPC 200 LSR Dynamic
Displacement
cm3/rev
[in3/rev]
40 [2.44]
50 [3.05]
60 [3.66]
70 [4.27]
80 [4.88]
100 [6.10]
125 [7.63]
160 [9.76]
185 [11.29]
200 [12.20]
230 [14.03]
250 [15.25]
315 [19.22]
400 [24.41]
40 [2.44]
50 [3.05]
60 [3.66]
70 [4.27]
80 [4.88]
100 [6.10]
125 [7.63]
160 [9.76]
185 [11.29]
200 [12.20]
230 [14.03]
250 [15.25]
315 [19.22]
400 [24.41]
40 [2.44]
50 [3.05]
60 [3.66]
70 [4.27]
80 [4.88]
100 [6.10]
125 [7.63]
160 [9.76]
185 [11.29]
200 [12.20]
T bar [psi]
L. R bar [psi]
40 [580]
280 [4061]
40 [580]
280 [4061]
40 [580]
280 [4061]
140 [2030]
175 [2538]
175 [2538]
140 [2030]
175 [2538]
210 [3045]
140 [2030]
175 [2538]
210 [3045]
29
30
Displacement
cm3/rev
[in3/rev]
50 [3.05]
60 [3.66]
70 [4.27]
80 [4.88]
100 [6.10]
125 [7.63]
160 [9.76]
185 [11.29]
200 [12.20]
230 [14.03]
250 [15.25]
315 [19.22]
400 [24.41]
T bar [psi]
L. R bar [psi]
40 [580]
280 [4061]
140 [2030]
175 [2538]
210 [3045]
Displacement
manual steer
mode
cm3/rev [in3/rev]
60 [3.66]
60 [3.66]
60 [3.66]
70 [4.27]
70 [4.27]
70 [4.27]
70 [4.27]
100 [6.10]
100 [6.10]
100 [6.10]
125 [7.63]
125 [7.63]
125 [7.63]
60 [3.66]
60 [3.66]
70 [4.27]
100 [6.10]
80 [4.88]
80 [4.88]
80 [4.88]
100 [6.10]
100 [6.10]
100 [6.10]
125 [7.63]
125 [7.63]
160 [9.76]
160 [9.76]
80 [4.88]
80 [4.88]
80 [4.88]
100 [6.10]
100 [6.10]
100 [6.10]
125 [7.63]
Displacement
*normal steer
mode
cm3/rev [in3/rev]
185 [11.29]
220 [13.42]
260 [15.87]
195 [11.90]
230 [14.03]
270 [16.48]
385 [23.49]
200 [12.20]
260 [15.87]
300 [18.31]
285 [17.39]
325 [19.83]
440 [26.85]
185 [11.29]
220 [13.42]
195 [11.90]
200 [12.20]
125 [7.63]
140 [8.54]
160 [9.76]
160 [9.76]
180 [10.98]
200 [12.20]
200 [12.20]
250 [15.25]
250 [15.25]
320 [19.53]
125 [7.63]
140 [8.54]
160 [9.76]
160 [9.76]
180 [10.98]
200 [12.20]
200 [12.20]
Rated
oil flow**
l/min
[US gal/min]
19 [5.02]
22 [5.81]
26 [6.87]
20 [5.28]
23 [6.07]
27 [7.13]
39 [10.30]
20 [5.28]
26 [6.87]
30 [7.93]
29 [7.66]
33 [8.72]
44 [11.62]
19 [5.02]
22 [5.81]
20 [5.28]
20 [5.28]
13 [3.43]
14 [3.70]
16 [4.23]
16 [4.23]
18 [4.75]
20 [5.28]
20 [5.28]
25 [6.60]
25 [6.60]
32 [8.45]
13 [3.43]
14 [3.70]
16 [4.23]
16 [4.23]
18 [4.75]
20 [5.28]
20 [5.28]
T bar [psi]
L. R bar [psi]
210 [3045]
40 [580]
280 [4061]
210 [3045]
40 [580]
280 [4061]
210 [3045]
40 [580]
280 [4061]
210 [3045]
40 [580]
280 [4061]
* normal steer mode: OSPQ: at a steering wheel speed higher than approximately 20 rpm, the amplification is fully active, and the displacements
in the table are valid.
** Rated flow at 100 rpm
31
Displacement, flow and pressure: OSPL LS, OSPBX LS, OSPCX LS, OSPLX LS
Common data: Look in sub catalogue: General Steering Components
Steering unit
OSPL 520 LS Static
OSPL 630 LS Static
OSPL 800 LS Static
OSPL 1000 LS Static
OSPL 520 LS Dynamic
OSPL 630 LS Dynamic
OSPL 800 LS Dynamic
OSPL 1000 LS Dynamic
OSPL 1200 Dynamic
OSPBX 160 LS Static
OSPBX 200 LS Static
OSPBX 250 LS Static
OSPBX 315 LS Static
OSPBX 400 LS Static
OSPCX 160 LS Dynamic
OSPCX 200 LS Dynamic
OSPCX 250 LS Dynamic
OSPCX 315 LS Dynamic
OSPCX 400 LS Dynamic
OSPLX 520 LS Static
OSPLX 630 LS Static
OSPLX 800 LS Static
Displacement
cm3/rev
[in3/rev]
520 [31.73]
630 [38.44]
800 [48.82]
1000 [61.02]
520 [31.73]
630 [38.44]
800 [48.82]
1000 [61.02]
1200 [73.22]
160 [9.76]
200 [12.20]
250 [15.25]
315 [19.22]
400 [24.41]
160 [9.76]
200 [12.20]
250 [15.25]
315 [19.22]
400 [24.41]
520 [31.73]
630 [38.44]
630 [38.44]
T bar [psi]
L. R bar [psi]
210 [3045]
40 [580]
280 [4061]
240 [3081]
40 [580]
280 [4061]
210 [3045]
40 [580]
280 [4061]
210 [3045]
40 [580]
280 [4061]
210 [3045]
40 [580]
280 [4061]
32
Valve functions in OSPC, OSPF, OSPD, OSPQ and OSPL LS steering units
Pilot pressure relief valve; (P - T, Qp) characteristic
The pilot pressure relief valve protects the steering unit against excessive pressure.
The pilot pressure relief valve in the OSPC LS, OSPF LS, OSPD LS, OSPQ LS and OSPL LS
steering unit together with the priority valve limit the maximum steering pressure P-T.
The pilot pressure relief valve is set at an oil flow to the priority valve of 25 l/min
[6.60 US gal/min].
For OSPC, OSPD, OSPQ and OSPL load sensing dynamic steering units, the setting values
are valid at a dynamic flow of 0.6 l/min [0.16 US gal/min].
For OSPF load sensing dynamic steering units, the setting values are valid at a dynamic
flow of 1.1 l/min [0.29 US gal/min].
Setting tolerance:
</= 170 bar: rated value +5 bar [72.5 psi].
> 170 bar: rated value +10 bar [145 psi].
P-T
psi
3000
2500
2000
P-T
bar
200
180
160
140
120
1500
1000
100
80
60
OSPC/OSPF/OSPD/OSPQ/OSPL LS+OLS 80
0
0
0
10
2
20
4
30
6
40
10
50
12
60
14
16
70
18
80
20
Qp
l/min
Qp
US gal/min
152B79.10
Shock valves
The shock valves protect the steering unit and reduce external forces on the steering
cylinder by limiting the pressure difference from L to T and from R to T.
The shock valves are set at 3 l/min [0.792 US gal/min]
At higher flow pressure peaks may occur.
The shock valves are of the direct acting type, so they react very quickly.
Setting tolerance: rated value +20 bar [290 psi].
33
Suction Valves
The suction valves allow oil suction to avoid cavitation in the steering cylinder. To
provide correct suction, a back pressure valve must be fitted in the tank line from the
steering unit.
Generally Sauer-Danfoss recommend a back pressure of 2 bar [29 psi], but on vehicles
with strong self straightening tendencies and on articulated steered vehicles, we
recommend 5-10 bar [72.5 - 145 psi]. For further advice, please contact the SauerDanfoss Sales Organisation.
Note: A connection which incorporates a check valve must be established to allow oil
flow to by-pass the back pressure valve (and filter) from the tank to steering unit. See
diagramme examples in sub catalogue General Steering Components page 37 - 39.
T-R
T-L
T-R
T-L
psi
bar
100
7
6
80
5
60
4
3
40
2
20
0
0
0.25
0.50
0.75
1.25
1.50
1.75
2.25
10
2.50
11
Qp
l/min
Qp
US gal/min
2.75
150-374.10
Check valves
The check valve in the P connection of the steering unit protects the driver against
steering wheel jerks. The check valve prevents oil from flowing backwards into the pump
line when steering against a high pressure on the cylinder side. The pressure drop across
the check valve is indicated on the following graph, which assumes the use of port
adaptors with 11 mm [0.43 in] minimum bore.
p
psi
90
75
p
bar
6
5
60
45
30
15
0
0
10
20
3
30
6
40
9
50
12
60
15
70
18
Qp
80
l/min
21
Qp
US gal/min
150-375.11
The check valve in the LS line of OSPC LS, OSPD LS and OSPQ LS dynamic steering units
also protects the driver against steering wheel jerks. The check valve prevents oil from
flowing backwards into the LS line to the priority valve when steering against a high
pressure on the cylinder side.
In OSPF LS oil cannot flow backwards into the LS line, look in sub catalogue: General
Steering Components page 26.
34
min. 21 [0.83]
min. 28 [1.10]
C
21.5 [0.846]
30
min. 15 [0.59]
min. 12 [0.47]
1 [0.04]
min. 12 [0.47]
30
C: G ports (P, T, L, R)
M: DIN 3852-2 - G
min. 26 [1.02]
min. 22 [0.87]
0.6 [0.024]
1 [0.04]
min. 15 [0.59]
28.6 [1.126]
28.3 [1.114]
30
min. 15 [0.59]
28.6 [1.126]
28.3 [1.114]
0.6 [0.024]
F: Metric ports
w. spot face and
O-ring chamfer
(P, T, L, R)
P: ISO 6149-1 - M18 x 1.5
min. 21 [0.83]
min. 21 [0.83]
min. 15 [0.59]
20.8 [0.819]
30
min. 11.5 [0.453]
30
min. 11.5 [0.453]
150-603.10
35
OSPB 125
OSPB/
OSPBX 160
OSPB/
OSPBX 200
OSPB/
OSPBX 250
OSPB/
OSPBX 315
OSPB/
OSPBX 400
82
81 .3 [3.2
4
.7 [
3.2 0]
17]
91 [3.58]
47 [1.85]
max. 87 [3.42]
OSPB 100
44 [1.73]
OSPB 80
LS
44 [1.73]
OSPB 50
mm
mm
L1 [in] L2 [in]
126
6.5
[4.96] [0.26]
129
10.4
[5.08] [0.41]
132 13.0
[5.20] [0.51]
135
16.2
[5.31] [0.64]
140
20.8
[5.51] [0.82]
145 26.0
[5.71] [1.02]
151 32.5
[5.94] [1.28]
160 40.9
[6.30] [1.61]
171
52.0
[6.73] [2.05]
44.4 [1.748]
25.4 [1.000]
Type
2.8 [0.110]
L2
45
57 [2.24]
7 [0.28]
29 [1.14]
85 [3.35]
44 [1.73]
L1
102 [4.02]
European version:
A: G ; 15 mm [0.59 in] deep
B: M10 1.5,
16 mm [0.63 in] deep
LS: G with spot face, 11 mm
[0.43 in] deep
US version:
A: - 16 UNF O-ring boss;
15 mm [0.59 in] deep
B: 3/8 - 16 UNC,
16 mm [0.63 in] deep
LS: G 7/16 - 20 UNF O-ring boss,
11.5 mm [0.45 in] deep
36
66 [2.60]
LS
64 [2.52]
150-590.11
OSPC/OSPF 70
OSPC/OSPF 80
OSPC/OSPF 100
OSPC/OSPF 125
OSPC/OSPF
OSPCX 160
OSPC/OSPF 185
OSPC/OSPF
OSPCX 200
OSPC/OSPF 230
OSPC/OSPF
OSPCX 250
OSPC/OSPF
OSPCX 315
OSPC/OSPF
OSPCX 400
European version:
A: G or G w. spot face
or M18 x 1.5 ISO 6149,
15 mm [0.59 in] deep
B: M10 x 1.5, 16 mm [0.63 in]
deep
LS: G w. spot face
or M12 x 1.5 ISO 6149,
11.5 mm [0.45 in] deep
8
812.3 [3
.7 [ .240
3.2 ]
17]
91 [3.58]
47 [1.85]
38 [1.50]
LS
max. 87 [3.42]
OSPC/OSPF 60
44 [1.73]
OSPC/OSPF 50
2.8 [0.110]
L2
45
57 [2.24]
7 [0.28]
85 [3.35]
44 [1.73]
29 [1.14]
L1
102 [4.02]
LS
35 [1.38]
OSPC 40
mm
mm
L1 [in] L2 [in]
126
6.5
[4.96] [0.26]
126
6.5
[4.96] [0.26]
128
9.1
[5.04] [0.36]
128
9.1
[5.04] [0.36]
129
10.4
[5.08] [0.41]
132
13.0
[5.20] [0.51]
135
16.2
[5.31] [0.64]
140
20.8
[5.51] [0.82]
143
24.0
[5.63] [0.94]
145
26.0
[5.71] [1.02]
154
35.1
[6.06] [1.38]
151
32.5
[5.94] [1.28]
160
40.9
[6.30] [1.61]
171
52.0
[6.73] [2.05]
44.4 [1.748]
25.4 [1.000]
Type
51 [2.01]
R LS
OSPC LS/LSR
for OLSA
150-591.11
US version:
A: -16 UNF O-ring boss,
15 mm (0.59 in) deep
B: 3/8 - 16 UNC or M10 x 1.5,
16 mm
[0.63 in] deep
LS: 7/16 - 20 UNF O-ring boss,
11.5 mm [0.45 in] deep
OSPC LS/LSR for OLSA:
B: M10 x 1,5,
16 mm [0.63 in] deep
37
2.8 [0.110]
L3
L2
8
812.3 [3
.7 [ .240
3.2 ]
17]
45
91 [3.58]
LS
47 [1.85]
38 [1.50]
44 [1.73]
20.8
[0.82]
26.0
[1.02]
16.2
[0.65]
20.8
[0.82]
26.0
[1.02]
40.9
[1.61]
13.0
[0.51]
20.8
[0.82]
26.0
[1.02]
20.8
[0.82]
26.0
[1.02]
40.9
[1.61]
max. 87 [3.42]
mm
L3 [in]
44.4 [1.748]
25.4 [1.000]
OSPD
60/185
OSPD
60/220
OSPD
70/195
OSPD
70/230
OSPD
70/270
OSPD
70/385
OSPD
100/200
OSPD
100/260
OSPD
100/300
OSPD
125/285
OSPD
125/325
OSPD
125/440
mm
mm
L1 [in] L2 [in]
195
9.1
[7.70] [0.36]
200
9.1
[7.87] [0.36]
190
9.1
[7.48] [0.36]
195
9.1
[7.70] [0.36]
200
9.1
[7.87] [0.36]
215
9.1
[8.46] [0.36]
191 13.0
[7.52] [0.51]
199 13.0
[7.83] [0.51]
204 13.0
[8.03] [0.51]
202
16.2
[7.95] [0.64]
207
16.2
[8.15] [0.64]
222
16.2
[8.74] [0.64]
57 [2.24]
85 [3.35]
102 [4.02]
44 [1.73]
L1
LS
35 [1.38]
Type
51 [2.01]
150-593.11
European version:
A: G w. spot-face
or M18 1.5 ISO 6149
15 mm [0.59 in] deep
B: M10 1.5, 16 mm [0.63 in]
deep
LS: G w. spot face or
M 12 x 1.5 ISO 6149
11.5 mm [0.45 in] deep
US version:
A: - 16 UNF O-ring boss;
15 mm [0.59 in] deep
B: M 10 1.5, 16 mm [0.63 in]
deep,
LS: 7/16 - 20 UNF o-ring boss,
11.5 mm [0.45 in] deep
38
OSPQ 100/160
OSPQ 100/180
OSPQ 100/200
OSPQ 125/200
OSPQ 125/250
OSPQ 160/250
OSPQ 160/320
European version:
A: M18 x 1.5 ISO 6149,
15 mm [0.59 in] deep
B: M10 x 1.5, 16 mm [0.63 in]
deep
LS: M12 x 1.5 ISO 6149,
11.5 mm [0.45 in] deep
L2
8
812.3 [3
.7 [ .240
3.2 ]
17]
91 [3.58]
47 [1.85]
38 [1.50]
LS
max. 87 [3.42]
OSPQ 80/160
44 [1.73]
OSPQ 80/140
44.4 [1.748]
25.4 [1.000]
OSPQ 80/125
mm
mm
L1 [in] L2 [in]
129 10.4
[5.08] [0.41]
129
10.4
[5.08] [0.41]
129
10.4
[5.08] [0.41]
132
13.0
[5.20] [0.51]
132
13.0
[5.20] [0.51]
132
13.0
[5.20] [0.51]
135
16.2
[5.31] [0.64]
135
16.2
[5.31] [0.64]
140
20.8
[5.51] [0.82]
140
20.8
[5.51] [0.82]
2.8 [0.110]
7 [0.28]
57 [2.24]
85 [3.35]
102 [4.02]
44 [1.73]
29 [1.14]
45
L1
LS
35 [1.38]
Type
51 [2.01]
150-594.12
39
2.8 [0.110]
L2
European version:
A: G 1/2; 15 mm [0.59 in] deep
B: M10 x 1.5, 16 mm [0.63 in]
deep
LS: G 1/4 w. spot face,
11.5 mm [0.45 in] deep
44 [1.73]
29 [1.14]
45
57 [2.24]
85 [3.35]
L1
102 [4.02]
LS
66 [2.60]
US version:
A: 3/4-16 UNF O-ring boss,
15 mm [0.59 in] deep
or for OVPL
B: M10 x 1.5, 16 mm [0.63 in]
deep
LS: 7/16-20 UNF O-ring boss,
11.5 mm [0.45 in] deep
82
81 .3 [3.2
4
.7 [
3.2 0]
17]
91 [3.58]
47 [1.85]
44.4 [1.748]
25.4 [1.000]
LS
max. 87 [3.42]
Type
44 [1.73]
mm
mm
L1 [in] L2 [in]
197
67.8
OSPL/OSPLX 520
[7.76] [2.67]
211
82.0
OSPL/OSPLX 630
[8.31] [3.23]
233 104.0
OSPL/OSPLX 800
[9.17] [4.09]
263 134.0
OSPL 1000
[10.35] [5.27]
44 [1.73]
Dimensions
64 [2.52]
38 [1.50]
European version:
A: for OVPL
B: M10 x 1.5, 16 mm [0.63 in]
deep
LS: G 1/4 w. spot face,
11.5 mm [0.45 in] deep
LS
35 [1.38]
LS
51 [2.01]
40
2.8 [0.110]
L3
L2
7 [0.28]
29 [1.14]
8
812.3 [3
.7 [ .240
3.2 ]
17]
91 [3.58]
LS
47 [1.85]
44.4 [1.748]
44.35 [1.746]
25.4 [1.000]
45
57 [2.24]
85 [3.35]
44 [1.73]
L1
102 [4.02]
LS
35 [1.38]
max. 87 [3.42]
Type
38 [1.50]
mm
mm
mm
L1 [in] L2 [in] L3 [in]
OSPL
288
104
52
1200 LS [10.34] [4.09] [2.05]
44 [1.73]
Dimensions
51 [2.01]
150-612.10
41
OVPL valve blocks can be flanged onto Sauer-Danfoss steering units type OSPL, which
are prepared for OVPL mounting.
Versions
Cylinders
P T
OVPL, 7 ports
PP
OVPL,
7 ports
OSPL LS
F300629
LS
150-685.10
Sauer-Danfoss
steering unit
External
connection
Sauer-Danfoss
steering unit
L
L
OVPL, 5 ports
R
R
T
PP
P
OVPL, 7 ports
R
T
PP
P
T
P
T
P
150-628.10
150-629.10
Code numbers
Weight
Connections
European version
P, T, L, R: G 1/2-S**
PP: G 1/4-S**
Number of
ports
OVPL 24
152-1117
240
[3480]
2.0
[4.41]
OVPL 28
152-1114
280
[4061]
2.0
[4.41]
OVPL 28
152-1116
280
[4061]
2.0
[4.41]
Valve block
42
Valve settings
Shock valve
bar
[psi]
kg
[lb]
OVPL in the table below has the following valve functions incorporated:
Check valve in P-port
Shock valves
Suction valves
Backpressure valve, with by-pass to reduce stand-by pressure in neutral position.
External
connection
OVPL, 5
ports and
backpressure
valve with
by-pass
Sauer-Danfoss
steering unit
T
PP
P
T
P
150-630.10
Code numbers
Valve settings
Connections
European version
P, T, L, R: G 1/2-S**
PP: G 1/4-S**
Number of
ports
OVPL 24
152-1120
240
OVPL 28
152-1130
280
Valve block
Shock valve
bar
[psi]
Weight
kg
[lb]
[3480]
2.0
[4.41]
[4061]
2.0
[4.41]
43
OVPL in the table below have all the following valve functions incorporated:
Check valve in P-port
Shock valves
Suction valves
Backpressure valve, without by-pass.
External
connection
External
connection
Sauer-Danfoss
steering unit
Sauer-Danfoss
steering unit
L
L
OVPL, 5
ports and
backpressure
valve
R
R
T
PP
P
OVPL, 7
ports and
backpressure
valve
R
T
PP
P
T
P
T
P
150-632.10
150-631.10
Code numbers
Weight
Connections
European version
P, T, L, R: G 1/2 - S**
PP: G 1/4 - S**
Number of
ports
OVPL 24
152-1132
240
[3480]
2.0
[4.41]
OVPL 28
152-1115
280
[4061]
2.0
[4.41]
Valve block
44
Valve settings
Shock valve
bar
[psi]
kg
[lb]
External
connection
Sauer-Danfoss
steering unit
OVPL, 4 ports
150-633.10
Code numbers
Connections
US version
3/4 - 16 UNF
O* + S**
Valve block
OVPL 28
152-1133
Valve settings
Number of
ports
Shock valve
bar
[psi]
280
[4061]
Weight
kg
[lb]
2.0
[4.41]
External
connection
Sauer-Danfoss
steering unit
P
150-634.10
Code numbers
Valve block
OVPL 28
Connections
US version
3/4 - 16 UNF
O* + S**
152-1136
Valve settings
Number of
ports
4
Shock valve
bar
[psi]
280
[4061]
Weight
kg
2.0
[lb]
[4.41]
45
Common data
Look in sub-catalogue: General, steering components
Valve functions
The data below come from measurements on a representative sample of valve blocks
from production.
An oil with a viscosity of 21mm2/s [SUS] at 50C [122F] was used during measuring.
Valve block
P, PP
bar
[psi]
T
bar
[psi]
bar
L, R
[psi]
OVPL 24
100
[26.42]
190
[2756]
15
[218]
240
[3480]
OVPL 28
100
[26.42]
225
[3263]
15
[218]
280
[4061]
Shock valves
The shock valves protect the valve block and steering unit and limit maximum external
forces on the steering cylinder. The shock valves in the valve block limit the maximum
pressure drop from L to T and from R to T.
The shock valves are set at 10 l/min. [2.64 US gal/min].
The shock valves are of the direct acting type, so they react very quickly.
Setting tolerance: rated value +/- 10 bar [145 psi] , ex. 240 [3480 psi] +/- 10 bar [145 psi].
Suction valves
The suction valves ensure oil suction to avoid cavitations in the steering cylinder. To
provide correct suction, a back pressure valve must be fitted in the tank line from the
steering unit.
The capacity of the suction valves can be increased by building in a back pressure in the
valve block.
The curve below shows pressure drop across a suction valve
p
psi
p
bar
15
200
150
10
100
5
50
0
0
10
2
20
4
30
6
40
10
50
12
60
14
Qp
l/min
Qp
16 US gal/min
152-150.10
46
Check valve
The check valve protects the driver against steering wheel jerks. The check valve
prevents oil from flowing backwards into the pump line when steering against a high
pressure on the cylinder side.
The check valve is built into the P connection of the valve block.
The curve below shows pressure drop across the check valve in p-connection
p
psi
p
bar
60
50
3
40
30
20
1
10
0
10
20
4
30
6
40
10
50
12
60
14
70
16
18
80
20
90
22
24
100
26
110
28
Qp
l/min
Qp
US gal/min
152-152.10
Backpressure valve
A backpressure valve increases the capacity of the suction valves.
The curve below shows pressure drop for backpressure valve without by-pass.
p
psi
300
p
bar
20
250
200
150
15
10
100
5
50
0
Qp
0
0
10
20
2.5
30
7.5
40
10
50
12.5
60
15
70
17.5
80
20
90
22.5
100 l/min
25
Qp
US gal/min
152-151.10
47
The curve below shows pressure drop for backpressure valve with by-pass.
p
psi
300
p
bar
20
250
200
150
15
10
100
5
50
0
Qp
0
0
10
20
2.5
30
7.5
40
10
50
12.5
60
15
70
17.5
80
20
90
22.5
100 l/min
25
Qp
US gal/min
152-178.10
Installation
Connection P in the valve block must be placed over the connection P in the steering
unit, so OVPL is provided with a positioning pin to fit the positioning hole in the steering
unit.
The valve block is supplied inclusive of 2 mounting screws and 4 O-rings for building
onto the steering unit.
Tightening torque 65 5 Nm [575 44 lbfin]. It is only allowed to mount OVPL blocks on
steering units with a flat port flange, no spot face is allowed.
48
92 [3.62]
OVPL, 5 ports
European version:
P, T, L and R:
G w. spot face,
15 mm (0.59 in) deep
PP: G , w. spot face,
11,5 mm (0.45 in) deep
X: 30,2 +0,2
Y: 21,3 +/- 0,2
16 [0.63]
51 [2.01]
28 [1.10]
US version:
P, T, L and R:
-16 UNF O-ring boss
15 mm (0.59 in) deep
X: 30,2 +0,2
44 [1.73]
95 [3.74]
29 [1.14]
44 [1.73]
B: Positioning pin
premounted in OVPL
102 [4.02]
152-149.10
49
92 [3.62]
OVPL, 7 ports
European version:
P, T, 2xL and 2xR:
G w. spot face,
15 mm (0.59 in) deep
PP: G , w. spot face,
11,5 mm (0.45 in) deep
X: 30,2 +0,2
Y: 21,3 +/- 0,2
16 [0.63]
51 [2.01]
28 [1.10]
44 [1.73]
92 [3.62]
B: Positioning pin
premounted in OVPL
21.5 [0.85]
44 [1.73]
29 [1.14]
50 [1.97]
102 [4.02]
152-148.10
50
OVR angle blocks are especially designed for applications in which pipes and/or hoses
must run parallel with the steering column axis, and where space is limited.
The valve block can be flanged onto Sauer-Danfoss steering unit OSPB, OSPC, OSPD,
OSPF, OSPQ and OSPL, which have no spot face around the ports.
Use the angle block makes angle and swivel connections and pipe bends unneccessary.
The OVR connections are positioned away from the steering wheel. (see dimensions
page 53)
Version
OVR
F300 626
150-635.10
Weight
Angle block
Connections
European version
P, T, L, R: G 1/2
S**
kg
[lb]
OVR
152-0201
2.0
[4.41]
Installation
The valve block is supplied inclusive of 2 mounting screws and 4 O-rings for building
onto the steering unit.
Tightening torque 65 5 Nm [575 44.3 lbfin]. OVR blocks may only be mounted on
steering units with a flat port flange, (no spot facing).
For OVR blocks with other thread ore kind of valves mounted, please contact the SauerDanfoss Sales organisation.
51
15 [0.59]
91 [3.58]
100 [3.94]
106 [4.17]
38 [1.50]
European version:
P, T, L and R:
G , 15 mm (0.59 in) deep
29.4 [1.158]
29.0 [1.143]
OVR
140 [5.51]
Dimensions
25 [0.98]
46 [1.81]
152-31.10
52
Sauer-Danfoss priority valves are used in steering systems with load sensing
steering units. In such systems steering always has first priority
Load sensing static priority valves
Load sensing static steering units require load sensing static priority valves. Load sensing
static steering systems have no oil flow in the LS connection when the steering unit is in
neutral position.
Load sensing dynamic priority valves
Load sensing dynamic steering units require load sensing dynamic priority valves. Load
sensing dynamic steering systems have a constant oil flow in the LS connection from the
priority valve to the steering unit even when the steering unit is in neutral position.
Ports:
P = pump,
CF = controlled flow (priority oil flow),
EF = excess flow,
L = left,
R = right,
T = tank,
LS = load sensing,
PP = pilot pressure
OLSA 40/80
The OLSA 40 and OLSA 80 flange on priority valves are used in load sensing steering
systems, built onto OSPC LS (OLSA) steering units.
F300625
OLSA static
OLSA dynamic
LS
LS
L
CF
CF
C
A
P
EF
B
T
EF
152B170.11
152B135.11
A: PP-damping orifice
B: LS-orifice
C: Dynamic-orifice
53
The OLS 40, OLS 80 and OLS 120 in line priority valves are used in load sensing steering
systems together with OSPB LS, OSPC LS, OSPF LS, OSPD LS, OSPQ LS and OSPL LS
steering units.
OLS 40/80
OLS 120
F300624
CF
F300623
EF
CF
EF
LS
LS
P
152B134.10
152B171.10
OLS static
OLS dynamic
The OLS 160 in line priority valve is used in load sensing steering systems together with
OSPB LS, OSPC LS, OSPF LS, OSPD LS, OSPQ LS and OSPL LS steering units.
OLS 160
F300622
CF
EF
LS
CF
EF
LS
PP
152B137.11
OLS static
T
152B172.11
OLS dynamic
The priority valve OLSP 80 is to be used in connection with e.g. Sauer-Danfoss gear
pumps type SNP and steering units type OSPB LS, OSPC LS, OSPF LS, OSPD LS and OSPQ
LS in load sensing steering systems, where maximum oil flow doesnt exceed 80 l/min
[21.7 USgal/min].
OLSP 80 priority valves are to be flanged on gear pumps with outlet ports square flange
type 35 (35 mm pitch diameter of 4x M6 bolt holes for fixing the priority valve on pump).
OLSP 80
F301 266
CF
EF
CF
EF
LS
LS
P
152B134.10
152B171.10
OLSP static
OLSP dynamic
The priority valve OLS 320 is to be used in connection with large pumps and steering
units type OSPB LS, OSPC LS, OSPF LS, OSPD LS, OSPQ LS and OSPL LS or with EHPS
steering valve in load sensing steering systems, where maximum oil flow doesnt exceed
320 l/min [84.5 USgal/min].
OLS 320
CF
F301 470
EF
LS
T
152B172.11
F301 471
55
The steering system pump is sized so that satisfactory performance is achieved for both
steering and working hydraulics - even at idle.
Before selecting a priority valve, consider
the type of steering unit (LS static, LS dynamic or OSPF LS dynamic)
the displacement of the steering unit
the pump flow
the applications requirement for energy optimization, initial steering response time
and stability, as these all govern the selection for control spring pressure
whether the priority valve should have internal PP (Pilot Pressure) or external
PP-connection depends on the pressure drop in the pump line between the priority
valves CF-port (Controlled Flow) and the steering units P-port. With normal hose and
tube dimensions and less than 5 m distance between priority valve and steering unit,
the immediate choice is normally a priority valve with internal PP.
The following survey lists the code numbers of the priority valves that are the most
frequently used in connection with the above Sauer-Danfoss steering unit types. All
priority valves in the code number tables, except OLS 160 static, have internal PP
connection. OLS 160 static in the code number table all have external PP connection.
OLS/OLSA static priority valves for load sensing static steering units
OLSA 40 static and OLSA 80 static
Priority valve
OLSA 40
OLSA 40
OLSA 40
OLSA 80
OLSA 80
OLSA80
Code Numbers
Connections
European version
US version
T,R,L: G 3/8
T, R, L: 9/16 - 18 UNF
P, EF: G 1/2
P, EF: 7/8 - 14 UNF
152B0001
152B0002
152B0122
152B0003
152B0124
152B0016
152B0019
152B0017
152B0020
152B0015
152B0125
Control spring
pressure
bar [psi]
Weight
kg [lb]
4 [58]
7 [101.5]
10 [145]
4 [58]
7 [101.5]
10 [145]
2.1 [4.63]
2.1 [4.63]
2.1 [4.63]
2.1 [4.63]
2.1 [4.63]
2.1 [4.63]
Control spring
pressure
Weight
OLS 40
OLS 40
OLS 40
OLS 80
OLS 80
OLS 80
56
European version
LS: G 1/4
P, EF, CF: G 1/2
152B0231
152B0232
152B0233
152B0261
152B0262
152B0263
US version
LS: 7/16 - 20 UNF
CF: 3/4 - 16 UNF
P, EF: 7/8 - 14 UNF
152B0237
152B0238
152B0253
152B0267
152B0268
152B0280
bar [psi]
4 [58]
7 [101.5]
10 [145]
4 [58]
7 [101.5]
10 [145]
kg [lb]
1.0 [2.2]
1.0 [2.2]
1.0 [2.2]
1.0 [2.2]
1.0 [2.2]
1.0 [2.2]
OLS/OLSA static priority valves for load sensing statics steering units
OLS 120 static
Priority valve
OLS 120
OLS 120
Code Numbers
Connections
European version
US version
LS: G 1/4
LS: 7/16 -20 UNF
CF: G 1/2
CF: 3/4 - 16 UNF
P, EF: G 3/4
P, EF: 1 1/16 - 12 UNF
152B2232
152B2238
152B2233
152B2239
Control spring
pressure
bar [psi]
7 [101.5]
10 [145]
Weight
kg [lb]
2.1 [4.63]
2.1 [4.63]
Priority valve
OLS 160
OLS 160
Code Numbers
Connections
European version
US version
LS, PP, T: G 1/4
LS, PP, T: 7/16 -20 UNF
CF: G 1/2
CF: 3/4 - 16 UNF
P, EF: G 3/4
P, EF: 1 1/16 - 12 UNF
152B1005
152B1085
152B1006
152B1086
Control
spring
pressure
Pilot
pressure
relief valve
bar [psi]
bar [psi]
7 [101.5]
10 [145]
170 [2465]
170 [2465]
Weight
kg [lb]
4.4 [9.7]
4.4 [9.7]
OLS/OLSA dynamic priority valves for load sensing dynamic steering units
OLSA 40 dynamic and OLSA 80 dynamic for OSPC LS dynamic
Priority valve
OLSA 40
OLSA 40
OLSA 40
OLSA 80
OLSA 80
OLSA 80
Code Numbers
Connections
European version
US version
T,R,L: G 3/8
T,R,L: 9/16 - 18 UNF
P/EF: G 1/2
P/EF: 7/8 - 14 UNF
152B8001
152B8041
152B8042
152B8046
152B8043
152B8047
152B8048
152B8044
152B8049
152B8045
Control spring
pressure
bar [psi]
4 [58]
7 [101.5]
10 [145]
4 [58]
7 [101.5]
10 [145]
Weight
kg [lb]
2.1 [4.63]
2.1 [4.63]
2.1 [4.63]
2.1 [4.63]
2.1 [4.63]
2.1 [4.63]
57
OLS/OLSA dynamic priority valves for load sensing dynamic steering units
OLS 40 dynamic and OLS 80 dynamic for OSPB, OSPC, OSPD, OSPQ and OSPL LS dynamic
Code Numbers
Connections
Priority valve
OLS 40
OLS 40
OLS 40
OLS 80
OLS 80
OLS 80
European version
LS: G 1/4
P, EF, CF: G 1/2
152B8231
152B8232
152B8233
152B8261
152B8256
152B8257
Control spring
pressure
US version
LS: 7/16 - 20 UNF
CF: 3/4 - 16 UNF
P, EF: 7/8 - 14 UNF
152B8253
152B8254
152B8268
152B8260
bar [psi]
4 [58]
7 [101.5]
10 [145]
4 [58]
7 [101.5]
10 [145]
Weight
kg [lb]
1.0 [2.20]
1.0 [2.20]
1.0 [2.20]
1.0 [2.20]
1.0 [2.20]
1.0 [2.20]
OLS 80 dynamic with low pressure drop (P-EF) spool for OSPB, OSPC, OSPD, OSPQ and OSPL
LS dynamic
Code Numbers
Connections
European version
LS: G 1/4
P, EF, CF: G 1/2
152B8259
Priority valve
OLS 80
Control spring
pressure
bar [psi]
7 [101.5]
Weight
kg [lb]
1.0 [2.20]
OLS 120 dynamic for OSPB, OSPC, OSPD, OSPQ and OSPL LS dynamic
Priority valve
OLS 120
OLS 120
Code Numbers
Connections
European version
US version
LS: G 1/4
LS: 7/16 -20 UNF
CF: G 1/2
CF: - 16 UNF
P, EF: G 3/4
P, EF: 1 1/16 - 12 UNF
152B8132
152B8143
152B8133
152B8144
Control spring
pressure
bar [psi]
7 [101.5]
10 [145]
Weight
kg [lb]
2.1 [4.63]
2.1 [4.63]
OLS 160 dynamic for OSPB, OSPC, OSPD, OSPQ and OSPL LS dynamic
Priority valve
OLS 160
OLS 160
OLS 160
OLS 160
OLS 160
58
Code Numbers
Connections
European version
US version
LS, T: G 1/4
LS, T: 1/16 -20 UNF
CF: G 1/2
CF: 3/4 - 16 UNF
P, EF: G 3/4
P, EF: 1 1/16 - 12 UNF
152B8159
152B8154
152B8160
152B8155
152B8105
152B8161
152B8156
152B8162
152B8157
Control
spring
pressure
Pilot
pressure
relief valve
bar [psi]
bar [psi]
7 [101.5]
10 [145]
12 [174]
7 [101.5]
10 [145]
170 [2465]
170 [2465]
170 [2465]
210 [3045]
210 [3045]
Weight
kg [lb]
4.4 [9.7]
4.4 [9.7]
4.4 [9.7]
4.4 [9.7]
4.4 [9.7]
Priority valve
OLS 40
OLS 80
Control spring
pressure
bar [psi]
Weight
kg [lb]
10 [145]
7 [101.5]
1.0 [2.20]
1.0 [2.20]
Control spring
pressure
Weight
Priority valve
OLS 120
bar [psi]
kg [lb]
7 [101.5]
2.1 [4.63]
Control
spring
pressure
Pilot
pressure
relief valve
Weight
bar [psi]
bar [psi]
7 [101.5]
10 [145]
none
none
4.4 [9.7]
4.4 [9.7]
Control spring
pressure
Weight
OLS 160
OLS 160
Code Numbers
Connections
European version
LS: G 1/4, CF: G 1/2
P, EF, CF: G 3/4
152B8158
152B8113
kg [lb]
Priority valve
OLSP 80 static
OLSP 80 dynamic
OLSP 80 dynamic for OSPF
Code Numbers
Connections
European version
LS: G
CF: G 3/8
EF: G
152B5002
152B5200
152B5201
bar [psi]
4 [58]
7 [101.5]
7 [101.5]
kg [lb]
1.0 [2.2]
1.0 [2.2]
1.0 [2.2]
59
OLS 320 dynamic in-line/stand alone with pilot pressure relief valve, black painted
Priority valve
OLS 320
Code Numbers
Connections
European version
LS, T: G
CF: G
P, EF: G 1
11006593
Control
spring
pressure
Pilot
pressure
relief valve
bar [psi]
bar [psi]
7 [101.5]
170 [2465]
Weight
kg [lb]
5.9 [13.0]
OLS 320 dynamic in-line/stand alone without pilot pressure relief valve, black painted
Priority valve
OLS 320
Code Numbers
Connections
US version
LS: 7/16 - 20 UNF
CF: 11/16 - 12 UN
P, EF: 15/16 - 12 UN
11007475
Control spring
pressure
bar [psi]
10 [145]
Weight
kg [lb]
5.9 [13.0]
If you require other port connections, other control spring pressure and/or other PP
connection, go to the survey on page 50, and tick off the desired specifications, then
consult the Sauer-Danfoss Sales Organization.
60
Name
Your
application
Priority
valve type
OLSA 80
Standard
Spool type
Ports,
OLS 40/80
Ports,
OLS 120
Ports,
OLS 160
G:
Unit black
painted
OLS 160
P, EF, T, L, R:
Metric 1:
M18 1.5 -O*** +S**
Metric:
G:
P, EF: G - S**
G: CF: G - S**
LS, PP: G - S**
10
P, EF: G1 - S**
G: CF: G - S**
LS, PP: G - S**
80
90
100
110
120
UNF:
UNF:
P, EF: 11/16 - 12 UN - O***
UNF 1: CF: 3/4 - 16 UNF - O***
LS, PP, T: 7/16 - 20 UNF O***
P, EF: G1 - S**
G 2: CF: G - S**
LS, PP, T: G - S**
EF: G - S**
CF: G3/8 - S**
LS: G - S**
P, EF: M27 2 - O*** +S**
Metric: CF: M18 1.5 - O*** +S**
LS: M12 1.5 - O*** +S**
P, EF: G - S**
G 1: CF: G - S**
LS, PP, T: G - S**
OLSP 80
P, EF: G - S**
T, L, R: G3/8 - S**
Date
RV-bar
OLS 160
OLS 320
OLS 120
Internal
Ports, OLSP G:
80 (P: square
flange 35)
Ports, OLS
320 in-line
OLS 80
Dynamic
Completed by
PP
connection
Ports,
OLSA
Potential, pcs/year
OLS 40
Static
Load
sensing type
Control
spring, bar
Vehicle
P, EF:15/16 - 12 UN - O***
UNF 2: CF: 7/8 - 14 UNF - O***
LS, PP, T: 7/16 - 20 UNF O***
Metric:
UNF:
UNF 1:
UNF 2:
140
170
190
200
210
Other settings
No relief valve
bar
Yes
No
61
Ports: PP-port only exists when external PP connection is used. T-port only exists for OLS 160 and OLS 320 with
integrated pilot pressure relief vlave (RV)
O*: O-ring chamfer on port connections
S**: Spot face around port connections
An alternative way to specify a variant is to state an existing code number and add the
modifications, you would like to have implemented in the basic steering unit.
Technical Data
Max. Pressure on Connections
Priority
valve
OLSA 40
OLSA 80
OLS 40
OLS 80
OLS 120
OLS 160
OLSP 80
OLS 320
62
Rated flow to
P-connection
P, EF
CF
L, R
LS
PP
l/min
[US gal/min]
bar
[psi]
bar
[psi]
bar
[psi]
bar
[psi]
bar
[psi]
40
80
40
80
120
160
80
320
[10.57]
[21.13]
[10.57]
[21.13]
[31.70]
[42.27]
[21.13]
[84.54]
250
250
250
250
250
350
250
300
[3625]
[3625]
[3625]
[3625]
[3625]
[5076]
[3625]
[4351]
210
210
210
210
210
210
210
280
[3045]
[3045]
[3045]
[3045]
[3045]
[3045]
[3045]
[4061]
280
280
[4061]
[4061]
210
210
210
210
210
210
210
280
[3045]
[3045]
[3045]
[3045]
[3045]
[3045]
[3045]
[4061]
20
20
[290]
[290]
bar
[psi]
[3045]
[3045]
[3045]
[3045]
[4061]
15
[217]
210
210
210
210
40
[580]
280
P-EF
psi
bar
200
14
175
12
150
10
125
100
75
50
10 bar
145 psi
7 bar
102 psi
4 bar
58 psi
6
4
25
min
0
0
5
1
10
2
15
3
20
5
25
6
30
7
35
9
Qp
40
l/min
Qp
US gal/min
10
152B139.11
OLSA/OLS 80
P-EF
psi
225
P-EF
bar
16
200
14
175
12
150
10
125
100
75
50
10 bar
145 psi
7 bar
102 psi
4 bar
58 psi
min.
8
6
4
25
0
0
0
10
2
20
4
30
6
40
10
50
12
60
14
16
70
18
80
20
Qp
l/min
Qp
US gal/min
152B80.11
63
P-EF
psi
bar
16
225
200
14
175
12
150
10
125
10 bar
145 psi
7 bar
102 psi
100
75
min
50
25
Qp
l/min
10
20
30
40
50
10
60
70
15
80
90
20
100
110
25
120
Qp
US gal/min
30
152B165.11
OLS 160
P-EF
psi
275
250
P-EF
bar
20
225
16
200
14
175
12
150
10
125
100
75
12 bar
174 psi
18
10 bar
145 psi
7 bar
102 psi
min
8
6
50
25
0
0
0
10
20
30
40
10
50
60
15
70
80
20
90
100
25
110
30
120
130
35
140
150
40
160
Qp
l/min
Qp
US gal/min
152B166.10
64
P-EF
psi
bar
225
16
200
14
175
12
150
10
125
100
75
50
10 bar
145 psi
7 bar
102 psi
4 bar
58 psi
6
4
25
min
0
0
5
1
10
2
15
3
20
5
25
30
35
9
Qp
l/min
40
Qp
US gal/min
10
152B174.10
OLSA/OLS 80
P-EF
psi
275
250
P-EF
bar
20
225
16
200
14
175
12
150
10
125
100
75
10 bar
145 psi
18
A+B
7 bar
102 psi
4 bar
58 psi
A+B
min
A+B
min
50
25
A
B
0
0
10
2
20
4
30
6
40
10
50
12
60
14
16
70
18
80
20
Qp
l/min
Qp
US gal/min
152B175.10
A: OLS/OLSA 80 Dynamic for OSPB, OSPC, OSPF, OSPD, OSPQ, OSPL LS Dynamic
B: OLS/OLSA 80 Dynamic with low pressure drop (P-EF) spool for OSPB, OSPC, OSPD, OSPQ, OSPL LS Dynamic
65
P-EF
psi
bar
20
275
10 bar
145 psi
7 bar
102 psi
18
250
16
225
200
14
175
12
150
10
125
100
7 bar
102 psi
A
B
A
min
75
50
25
A+B
10
20
30
40
50
60
10
70
15
80
90
20
100
110
25
Qp
l/min
120
30
Qp
US gal/min
152B176.10
A: OLS 120 Dynamic for OSPB, OSPC, OSPD, OSPQ, OSPL LS Dynamic
B: OLS 120 Dynamic for OSPF LS Dynamic
OLS 160
P-EF
psi
P-EF
450
bar
32
400
28
350
24
300
250
200
150
12 bar
174 psi
20
16
12
100
50
10 bar
145 psi
7 bar
102 psi
7 bar
102 psi
min
A
A+B
0
0
10
20
30
40
10
50
60
15
70
80
20
90
100
25
A: OLS 160 Dynamic for OSPB, OSPC, OSPD, OSPQ, OSPL LS Dynamic
B: OLS 160 Dynamic for OSPF LS Dynamic
66
110
30
120
130
35
140
150
40
160
Qp
l/min
Qp
US gal/min
152B177.10
P-EF
psi
175
bar
12
150
10
125
7 bar
102 psi
4 bar
58 psi
min
100
6
75
50
25
10
20
30
40
50
10
60
12
70
14
80
Qp
l/min
Qp
18 US gal/min
16
152-181.10
P-EF
psi
175
bar
12
150
10
125
7 bar
102 psi
B
4 bar
58 psi
min
100
6
75
50
25
A+B
0
10
20
4
30
6
40
8
50
10
60
12
70
14
80
16
Qp
l/min
Qp
18 US gal/min
152-182.10
67
P-EF
bar
18
225
200
14
175
12
150
10
125
100
75
50
10 bar
145 psi
16
7 bar
102 psi
min.
6
4
25
20
40
10
60
15
80
20
100
25
120
30
140
35
160
40
180
45
200
50
55
220
60
240
65
260
70
280
300
75
80
Qp
320 l/min
Qp
85 US gal/min
152B185.10
P-EF
bar
30
10 bar
145 psi
400
350
300
25
7 bar
102 psi
20
250
200
150
100
50
0
15
10
min
5
0
20
40
10
60
15
80
20
100
25
120
30
140
35
160
40
180
45
200
50
55
220
60
240
65
260
70
280
300
75
80
Qp
320 l/min
Qp
85 US gal/min
152B186.10
68
OLS 160
P-T
psi
2800
P-T
bar
190
2700
2600
2500
180
170
2400
2300
2200
160
150
0
0
10
20
30
40
10
50
60
15
70
80
20
90
100
25
110
120
30
130
140
35
150
40
160
Qp
l/min
Qp
US gal/min
152B141.11
Qp = Pump flow
OLS 320
HP-HT HP-HT
psi
3000
2900
bar
210
200
2800
2700
190
2600
180
2500
2400
2300
2200
2100
0
170
160
150
Qp
0
0
0
40
10
80
20
120
30
160
40
200
50
240
60
280
70
320 l/min
80
Qp
US gal/min
152B187.10
69
OLSA
European version:
P, EF:
G w. spot face
14 mm [0.55 in] deep
x = 34 mm [1.34 in],
max. 1,5 mm [0.06 in] deep
or M18 x 1.5 ISO 6149
14,5 mm [0.57 in] deep
x = 29 mm [1.14 in],
max. 1,5 mm [0.06 in] deep
or M22 x 1.5 ISO 6149,
15,5 mm [0.61 in] deep
x = 34 mm [1.34 in],
max. 1,5 mm [0.06 in] deep
44 [1.73]
29 [1.14]
T, L, R:
G 3/8 w. spot face
12 mm [0.47 in] deep
y = 34 mm [1.34 in],
max. 1,5 mm [0.06 in] deep
or M18 x 1.5 ISO 6149,
15 mm [0.59 in] deep
y = 29 mm [1.14 in],
max. 1.5 mm [0.06 in] deep
7 [0.28]
120 [4.72]
US version:
P, EF:
7/8-14 UNF O-ring boss
16.7 mm [0.66 in] deep
x = 34 mm [1.34 in],
max. 1.5 mm [0.06 in] deep
T, L, R:
9/16 - 18 UNF O-ring boss
12.7 mm [0.50 in] deep
y = 25 mm [0.98 in],
max. 1.5 mm [0.06 in] deep
87 [3.43]
87 [3.43]
EF
EF
R/CF
L
20 [0.79]
55 [2.17]
29 [1.14]
20 [0.79]
40 [1.57]
76 [2.99]
44 [1.73]
T
X
70
152B81.12
European version:
P, EF:
G w. spot face
15 mm [0.59 in] deep
x = 29 mm [1.14 in],
max. 1.5 mm [0.06 in] deep
or M22 x 1.5 ISO 6149
15 mm [0.59 in] deep,
x = 34 mm [1.34 in],
max. 1 mm [0.04 in] deep
G w. spot face
12.5 mm [0.49 in] deep
z = 21mm [0.83 in],
max. 1 mm [0.04 in] deep
or M12 x 1,5 ISO 6149
12,5 mm [0.49 in] deep,
z = 22 mm [0.86 in]
0 mm deep
42 [1.65]
139 [5.47]
19.7 [0.776]
40.3 [1.587]
LS:
41 [1.61]
PP
LS
EF
22 [0.87]
40.3 [1.587]
25 [0.98]
CF:
G w. spot face
14 mm [0.55 in]deep
y = 29 mm [1.14 in],
max. 1.5 mm [0.06 in] deep
or M18 x 1,5 ISO 6149
12 mm [0.47 in] deep,
y = 29 mm [1.14 in],
max. 1 mm [0.04 in] deep
CF
8.9 [0.350]
8.5 [0.335]
19.7 [0.776]
20.3 [0.799]
US version:
P, EF:
7/8 - 14 UNF O-ring boss
15 mm [0.59 in] deep
x = 34 mm [1.14 in],
max. 1.3 [0.05] deep
CF:
-16 UNF O-ring boss
14,3 mm [0.56 in] deep
y = 30 mm [1.18 in],
max. 1.3 mm [0.05 in] deep
39 [1.54]
152B136.11
LS:
7/16-20 UNF O-ring boss
12.5 mm [0.49 in] deep
z = 21 mm [0.83 in],
max. 1 mm [0.04 in] deep
71
OLS 120
European version:
P, EF:
G w. spot face
x = 42 mm [1.65 in],
max. 2.5 mm [0.10 in] deep
or M27 x 2 ISO 6149
x = 40 mm [1.57 in],
max. 2.5 mm [0.10 in] deep
9.1 [0.358]
8.7 [0.343]
LS
P
9.1 [0.358]
8.7 [0.343]
18.7 [0.736]
66 [2.60]
PP
80 [3.15]
CF
EF
Z
10 [0.39]
38.4 [1.512]
114 [4.49]
US version:
140 [5.51]
P, EF:
1 1/16 - 12 UN O-ring boss
x = 41mm [1.61 in],
max. 1.5 mm [0.06 in] deep
CF:
- 16 UNF O-ring boss
y = 30 mm [1.18 in],
max. 1.5 mm [0.06 in] deep
Y
152B173.11
LS, PP:
7/16 - 20 UNF O-ring boss
11.5 mm [0.45 in] deep
z = 19 mm [0.75 in] 0 mm
deep
72
24 [0.94]
56 [2.20]
96 [3.78]
LS, PP:
G w. spot face
12 mm [0.47 in] deep
z = 19 mm [0.75 in]
0 mm deep
or M12 x 1,5 ISO 6149
11,5 mm [0.45 in] deep,
z = 19 mm [0.75 in]
0 mm deep
53 [2.09]
CF:
G w. spot face
y = 34 mm [1.34 in],
max. 2.5 mm [0.10 in] deep
or M18 x 1.5 ISO 6149
y = 29 mm [1.14 in],
max. 2.5 mm [0.10 in] deep
OLS 160
European version:
P, EF:
G w. spot face
x = 42 mm [1.65 in],
max. 2.5 mm [0.10 in] deep
or G 1 w. spot face
x = 47 mm [1.85 in],
max 2.5 mm [0.10 in] deep
CF:
G w. spot face
y = 34 mm [1.34 in],
max. 2.5 mm [0.10 in] deep
or G w. spot face
y = 38 mm [1.50 in],
max. 2.5 mm [0.10 in] deep
LS, PP, T:
G w. spot face
12 mm [0.47 in] deep
z = 22.8 mm [0.89 in],
max. 1 mm [0.04 in]deep
u = 25 mm [0.98 in]
max. 1.5 mm [0.06 in] deep
32 [1.26]
178 [7.01]
75 [2.95]
23 [0.91]
EF
125 [4.92]
32 [1.26]
32 [1.26]
PP
LS
62.5 [2.46]
35 [1.38]
US version:
P, EF:
1 1/16-12 UNF O-ring boss
x = 41 mm [1.61 in],
max. 2.5 mm [0.10 in] deep
or 1 5/16 - 12 UNF O-ring boss
x = 49 mm [1.93 in],
max. 2.5 mm [0.10 in] deep
CF
9.1 [0.36]
8.7 [0.34]
9.1 [0.36]
8.7 [0.34]
35 [1.38]
63 [2.48]
130 [5.12]
Z
32.5 [1.28]
65 [2.56]
CF:
-16 UNF O-ring boss
y = 32 mm [1.26 in],
max. 2.5 mm [0.10 in] deep
7/8 - 14 UNF O-ring boss
y = 30 mm [1.18 in],
max. 2.5 mm [0.10 in] deep
LS, PP, T:
7/16 - 20 UNF O-ring boss
11.5 mm [0.45 in] deep
z = 22,8 mm [0.89 in],
max. 1.5 mm [0.06 in] deep
u = 21 mm [0.83 in],
max. 1.6 mm [0.06 in] deep
X
152B138.11
73
LS:
7/16 - 20 UNF O-ring boss
12.5 mm [0.49 in] deep
31.2 [1.228]
38 [1.50]
32 [1.26]
19.5 [0.768]
38 [1.50]
25 [0.98]
11 [0.04]
91 [3.58]
CF:
-16 UNF O-ring boss
15 mm [0.59 in] deep
x = 29 [1.14 in]
max. 1.5 mm [0.06 in] deep
EF:
7/8 - 14 UNF O-ring boss
16.7 mm [0.66 in] deep
y = 34 [1.34 in]
max. 1.5 mm [0.06 in] deep
84 [3.31]
6.5 [0.26]
LS:
G w. spot face
12.5 mm [0.49 in] deep
or
M12 1.5 ISO 6149
12.5 mm [0.49 in] deep
US version:
24.7 [0.972]
CF:
G 3/8 w. spot face
15 mm [0.59 in] deep
x = 28, max. 1.5 mm [0.06 in]
deep
or
M18 1.5 ISO 6149
15 mm [0.59 in] deep
y = 29, max. 1.5 mm [0.06 in]
EF:
G w. spot face
15 mm [0.59 in] deep
y = 34, max. 1.5 mm [0.06 in]
or
M22 1.5 ISO 6149
15 mm [0.59 in] deep
x = 34, max. 1.5 mm [0.06 in]
24.4 [0.961]
1.88 [0.74] deep
24.7 [0.972]
43.5 [1.713]
33 [1.30]
European version:
CF
20 [0.89]
52 [2.05]
33 [1.30]
Dimensions
LS
EF
24 [0.94]
152-180.11
74
European version:
5 [0.20]
59 [2.32]
3x20 [0.79]
2x16 [0.63]
3x8.5 [0.335]
63.5 [2.500]
PP
78 [3.07]
CF
CF:
1 1/16-12 UN O-ring boss
y = 41 mm [1.61 in]
max 0.2 mm [0.01 in] deep
or
-16UNF O-ring boss
y = 30 mm [1.18 in]
max 0.2 mm [0.01 in] deep
47 [1.85]
LS, PP, T:
7/16-20 UNF O-ring boss
14 [0.55]
22.5 [0.886]
117.5 [4.626]
47.5 [1.870]
EF
52.5 [2.067]
T:
G w. spot face
z = 25 mm [0.98 in]
max 1.5 mm [0.06 in] deep
P, EF:
1 5/16-12 UN O-ring boss
x = 49 mm [1.93 in]
max 0.2 mm [0.01 in] deep
47.5 [1.870]
LS, PP:
G w. spot face
US version:
47.5 [1.870]
48 [1.89]
P, EF:
G 1 w. spot face
x = 47 mm [1.85 in]
max 1 mm [0.04 in] deep
CF:
G w. spot face
y = 34 mm [1.34 in]
max 2.5 mm [0.10 in] deep
236 [9.29]
33 [1.30]
4 [0.16]
7 [0.28]
LS
Dimensions
80 [3.15]
150H26.10
75
F300630
OSQA static
OSQB static
CR
CL
CR
CL
P
L
P
L
R
T
LS
R
T
LS
EF
EF
PP
PP
HP
HP
HT
HT
150F55.10
150F56.10
CL
CR
CL
CR
EF
PP
HP
LS
HT
150F69.10
76
EF
PP
HP
LS
HT
150F54.10
F301 256
OSQB
CL
OSQB
CR
CR
CL
L
P
L
R
T
EF
EF
PP
PP
LS
HP
min. 7 bar
[min. 102 psi]
HT
LS
HP
T
min. 7 bar
[min. 102 psi]
HT
4 bar
[58 psi]
4 bar
[58 psi]
P
OLSQ
P
150F74.11
DR
P
OLSQ
DR
150F73.11
77
OSQA and OSQB static flow amplifiers for load sensing static steering units
These flow amplifiers have to be used in connection with steering units type OSPBX LS
or OSPLX LS.
Flow
amplifier
OSQA 4
OSQA 5
OSQA 8
OSQB 4
OSQB 5
OSQB 8
OSQB 10
Code Numbers
Connections:
see dimensions
European
US version
version
150F0040
150F0043
150F0041
150F0044
150F0042
150F0045
150F0030
150F0053
150F0031
150F0054
150F0032
150F0055
150F0094
Setting pressures
Pilot pressure
relief valve
bar [psi]
Shock valves
170 [2465]
170 [2465]
170 [2465]
170 [2465]
170 [2465]
170 [2465]
170 [2465]
230 [3335]
230 [3335]
230 [3335]
230 [3335]
230 [3335]
230 [3335]
260 [3770]
Control
spring
pressure
bar [psi]
Weight
kg [lb]
bar [psi]
7 [101]
7 [101]
7 [101]
7 [101]
7 [101]
7 [101]
7 [101]
29 [64]
29 [64]
29 [64]
29 [64]
29 [64]
29 [64]
29 [64]
OSQB/OLSQ dynamic flow amplifier for load sensing dynamics steering units.
OSQB with OLSQ has no pilot pressure relief valve.
This flow amplifier has to be used in connection with steering unit type OSPCX LS, which
has incorporated pilot pressure relief valve
Flow amplifier
OSQB 8/OLSQ
Code Numbers
Connections
see dimensions
European version
150F8010
Setting pressures
Shockvalves
bar [psi]
260 [3770 psi]
Control spring
pressure
bar [psi]
7 [101.5]
Weight
kg [lb]
32 [70.6]
If you require other amplification factors, other valve settings or other control spring
pressures, please fill in the order form on page 68 and contact the Sauer-Danfoss Sales
Organization.
78
Name
Your
application
Potential pcs/year
OSQA
Flow amplifier
type
Amplification
factor
Vehicle
Ports,
OSQA
Ports,
OSQB
Back pressure
valve
Unit black
painted
16.5
10 [145]
16 [232]
Internal
External
G: European version
HP, EF, HT, CL, CL: G 3/4
P, T, L, R: G 1/2
PP, LS: G 1/4
UNF: US version
HP, EF, HT, CL, CR: 1 1/16 - 12 UN
P, T, L, R: 3/4 - 16 UNF
PP, LS: 7/16 - 20 UNF
G: European version
HP, EF,: 1 1/4 in SAE flange
HT, CL, CR: 1 in SAE flange
P, T, L, R: G 1/2
PP, LS: G 1/4
UNF: US version
HP, EF: 1 in SAE flange
HT, CL, CR: 1 in SAE flange
P, T, L, R: - 16 UNF
PP, LS: 7/16 - 20 UNF
G: (European version)
HP, EF: 1 1/4 in SAE flange
HT, CL, CR: 1 in SAE flange
POSQ, POLSQ, T, L, R: G 1/2
PP, LS: G 1/4
Ports,
OSQB/OLSQ
Shock valves,
bar [psi]
9.1
Dynamic
7 [101]
PPconnection
Pilot pressure
relief valve
bar [psi]
OSQB/OLSQ
Static
Control spring
bar
Date
Load sensing
type
Completed by
100 [1450]
165 [2393]
120 [1740]
140 [2030]
200 [2900]
170 [2465]
230 [3335]
210 [3045]
260 [3770]
No relief valve
(only OSQB/OLSQ)
270 [3916]
No
No
An alternative way to specify a variant is to state an existing code number and add the modifications, you would like to have implemented in the
basic flow amplifier.
Code number of basic flow amplifier: __________________________
Requested modifications: _____________________________________________________________________________________________________
___________________________________________________________________________________________________________________________
79
Flow amplifier
OSQA
OSQB
240 [63.4]
400 [106]
HP, EF, CL CR
bar [psi]
280 [4061]
280 [4061]
T
bar [psi]
15 [217.5]
15 [217.5]
Amplification
factor
OSQA 4
OSQA 5
OSQA 8
OSQA 10
9.1
OSQB 4
OSQB 5
OSQB 8
OSQB 10
9.1
OSQB 20
16.5
160
cm3/rev
[in3/rev]
640
[39]
800
[49]
1280
[78]
1456
[89]
2640
[161]
OSPBX/OSPCX LS
200
315
cm3/rev
cm3/rev
[in3/rev]
[in3/rev]
800
1260
[49]
[77]
1000
1575
[61]
[96]
1600
[98]
1820
[111]
3300
[201]
2520
[154]
2865
[175]
400
cm3/rev
[in3/rev]
1600
[98]
2000
[122]
520
cm3/rev
[in3/rev]
2080
[127]
2080
[127]
2600
[159]
4160
[254]
2000
[122]
3200
[195]
3640
[222]
OSPLX LS
630
cm3/rev
[in3/rev]
800
cm3/rev
[in3/rev]
2520
[154]
3150
[192]
3200
[195]
4000
[244]
Installation
The flow amplifier has to be mounted on a flat surface.
Mounting screw
M 10 x 1.5
3/8 - 16 UNC
7/16 - 14 UNC
Tightening torque for fittings: Look in sub catalogue General Steering Components page 36.
80
HP-EF
bar
10
7 bar
102 psi
125
8
100
6
min.
75
50
25
20
40
60
80
10
100
20
120
140
30
160
180
40
200
Qp
240 l/min
220
50
60
Qp
US gal/min
150F64.10
OSQB
HP-EF
psi
HP-EF
200
bar
14
175
12
150
125
100
75
7 bar
102 psi
10
8
6
50
25
min.
40
10
80
20
120
30
160
40
200
50
240
60
280
70
320
80
Qp
360
90
400 l/min
100
Qp
US gal/min
150F63.11
81
bar
190
2700
2600
2500
180
170
2400
2300
2200
160
150
Qp
0
0
40
80
10
120
20
160
30
200
40
240 l/min
50
60
Qp
US gal/min
150F67.11
OSQB
HP-HT HP-HT
psi
3000
2900
2800
bar
210
200
2700
190
2600
180
2500
2400
170
2300
160
2200
2100
0
150
0
40
10
80
20
120
30
160
40
200
50
240
60
280
70
320
80
Qp
360
90
400 l/min
100
Qp
US gal/min
150F66.11
82
p
bar
15
200
175
150
10
125
100
75
50
25
0
40
80
10
20
120
160
30
40
200
50
240
60
280
320
70
80
Qp
360
90
400 l/min
100
Qp
US gal/min
150F68.10
Shock valves
The shock valves protect the flow amplifier against shock from external forces on the
steering cylinders. The shock valves in OSQA and OSQB limit the maximum pressure
drop from CL to HT and from CR to HT. The shock valves are set at 10 l/min [2.64 US gal/
min].
Setting tolerance: rated value +20 bar [290 psi].
Suction valves
The suction valves ensure oil suction on the side of the steering cylinder pistons where
in unfavorable conditions cavitation might occur. The capacity of the suction valves is
increased in OSQB by the built-in back pressure valve.
HT-CR
HT-CL
psi
150
HT-CR
HT-CL
bar
10
8
100
6
50
4
2
0
0
0
10
20
5
30
40
10
50
60
15
70
80
20
90
100
25
110
30
120
130
35
140
150
40
Qp
160 l/min
Qp
US gal/min
150F35.11
83
POLSQHTOSQB
bar
6
80
70
60
50
40
30
20
10
0
3
2
1
Qp
0
0
0
10
20
5
30
40
10
50
60
15
70
80
20
90
100 l/min
25
Qp
US gal/min
150F76.10
84
G
G
G
112 [4.41]
5 [0.20]
120.2 [4.73]
119.8 [4.72]
285 [11.22]
150 [5.91]
17 [0.67]
16 [0.63]
129 [5.08]
121 [4.76]
56 [2.20]
125 [4.92]
125 [4.92]
86 [3.39]
31 [1.22] 31 [1.22]
68 [2.68]
41 [1.61]
55 [2.17]
A:
7 16
/ - 14 UNC, 21 mm [0.83 in]deep
B:
7 16
/ - 14 UNC, 16 mm [0.63 in] deep
47 [1.85]
/16 - 20 UNF
78 [3.07]
16.018 [0.631]
16.000 [0.630]
75.2 [2.96]
74.8 [2.94]
PP, LS:
1 1/16 - 12 UN
- 16 UNF
150.2 [5.91]
149.8 [5.90]
US version:
HP, EF, HT, CL, CR:
P, T, L, R:
5.3 [0.21]
4.7 [0.19]
16.018 [0.631]
16.000 [0.630]
82 [3.23]
min. 21 [0.83]
86 [3.39]
European version:
HP, EF, HT, CL, CR:
P, T, L, R:
PP, LS:
150F36.11
85
165 [6.50]
153 [6.02]
European version:
HP, EF:
1 in SAE flange
7 16
/ -14 UNC
18 mm [0.71 in] deep (8)
US version:
HP, EF:
1 in SAE flange
7 16
/ - 14 UNC
18 mm [0.71 in] deep (8)
17 [0.67]
120.2 [4.73]
119.8 [4.72]
285 [11.22]
47 [1.85]
78 [3.07]
16 [0.63]
30.2 [1.19]
P, T, L, R: G
PP, LS: G
58.7 [2.31]
150 [5.91]
16.018 [0.631]
16.000 [0.630]
30.2 [1.19]
150.2 [5.91]
149.8 [5.90]
5 [0.20]
5.3 [0.21]
4.7 [0.19]
16.018 [0.631]
16.000 [0.630]
82 [3.23]
min. 21 [0.83]
75.2 [2.96]
74.8 [2.94]
112 [4.41]
P, T, L, R: - 16 UNF
PP, LS: 7/16 - 20 UNF
A:
7 16
/ - 14 UNC, 21 mm [0.83 in] deep
B:
7 16
/ - 14 UNC, 16 mm [0.63 in] deep
129 [5.08]
121 [4.76]
56 [2.20]
125 [4.92]
125 [4.92]
86 [3.39]
86 [3.39]
26.2 [1.03]
31 [1.22] 31 [1.22]
26.2 [1.03]
52.4 [2.06]
55 [2.17]
68 [2.68]
41 [1.61]
26.2 [1.03]
52.4 [2.06]
150F37.10
86
196 [7.72]
150 [5.91]
112 [4.41]
5.3 [0.21]
4.7 [0.19]
17 [0.67]
120.2 [4.73]
119.8 [4.72]
58.7 [2.31]
146 [5.75]
150 [5.91]
174 [6.85]
158 [6.22]
285 [11.22]
47 [1.85]
16 [0.63]
16.018 [0.631]
16.000 [0.630]
78 [3.07]
108 [4.25]
30.2 [1.19]
30.2 [1.19]
75.2 [2.96]
74.8 [2.94]
150.2 [5.91]
149.8 [5.90]
129 [5.08]
121 [4.76]
56 [2.20]
27 [1.06]
125 [4.92]
86 [3.39]
86 [3.39]
125 [4.92]
26.2 [1.03]
31 [1.22] 31 [1.22]
26.2 [1.03]
52.4 [2.06]
171 [6.73]
55 [2.17]
View X
PDR
68 [2.68]
53 [2.09]
41 [1.61]
108 [4.25]
A:
M10 x 1.5, 21 mm [0.83 in] deep
B:
M10 x 1.5, 16 mm [0.63 in] deep
View X
POSQ, POLSQ, T, L, R: G
PP, LS, PDR: G
5 [0.20]
16.018 [0.631]
16.000 [0.630]
82 [3.23]
min. 21 [0.83]
26.2 [1.03]
52.4 [2.06]
150F75.10
87
Products we offer:
Bent Axis Motors
Closed Circuit Axial Piston Pumps
and Motors
Displays
Electrohydraulic Power Steering
Electrohydraulics
Hydraulic Power Steering
Sauer-Danfoss is a global manufacturer and supplier of highquality hydraulic and electronic components. We specialize in
providing state-of-the-art technology and solutions that excel in
the harsh operating conditions of the mobile off-highway market.
Building on our extensive applications expertise, we work closely
with our customers to ensure exceptional performance for a broad
range of off-highway vehicles.
We help OEMs around the world speed up system development,
reduce costs and bring vehicles to market faster.
Sauer-Danfoss Your Strongest Partner in Mobile Hydraulics.
Integrated Systems
Joysticks and Control Handles
Microcontrollers and Software
Sauer-Danfoss ApS
DK-6430 Nordborg, Denmark
Phone: +45 7488 4444
Fax:
+45 7488 4400
Sauer-Danfoss-Daikin LTD.
Shin-Osaka TERASAKI 3rd Bldg. 6F
1-5-28 Nishimiyahara, Yodogawa-ku
Osaka 532-0004, Japan
Phone: +81 6 6395 6066
Fax:
+81 6 6395 8585
www.sauer-danfoss.com