Professional Documents
Culture Documents
Ace Model Cv-101wh Di Gate Valves. Resilient Seated. Flange Ends
Ace Model Cv-101wh Di Gate Valves. Resilient Seated. Flange Ends
WRAS approved.
and outside.
Available with
handwheel, stem cap
or electrical actuator.
WRAS approved
internally and
externally.
Stem sealing
exchangeable under
pressure.
Hydraulic test to 24 bar
according to BS5163.
Use for water, sewage
and neutral liquids to
max. 70rC.
Material Specifications
Body, bonnet, gland flange, handwheel, stem cap: Ductile Iron BS2789, Epoxy coated
Gate core: Ductile Iron BS2789
Stem: Stainless steel BS970
Gate rubber: EPDM
O-ring, gasket, gland gasket, wiper ring: NBR
Wedge nut, Thrust collar, stem seal box: DZR bronze alloy or Gunmetal to BS1400 LG2
Bonnet bolt: Stainless Steel with wax covered
Gland flange bolt, Washer: Stainless steel
Cap bolt: Stainless steel
Dimensions
Comply with BS5163 type B
Flange and drilling to BS EN 1092-2
(BS4504) PN16
Size
DN
50
65
80
100
150
200
250
300
350
400
qD
qD1
H1
165
185
200
220
285
340
400
455
520
580
125
145
160
180
240
295
355
410
470
525
249
274
306
335
427
520
597
687
776
842
334
341
371
398
490
574
651
741
830
896
178
190
203
229
267
292
330
356
381
406
Larger sizes, other trimming materials and higher working pressure are available on request.
Z x qd
200
4 x q19
200
4 x q19
250
8 x q19
280
8 x q19
320
8 x q23
350
12 x q23
400
12 x q28
450
12 x q28
600
16 x q28
600
16 x q31
All dimensions in mm
RIGHT IS RESERVED TO CHANGE SPECIFICATIONS WITHOUT PRIOR NOTICES DUE TO MANUFACTURER CONTINUOUS DEVELOPMENT AND
IMPROVEMENT IN DESIGN, MATERIALS, AND MANUFACTURING PROCESS.