Professional Documents
Culture Documents
Synopsis: Fabrication of Automatic Lorry Trailor Lifter
Synopsis: Fabrication of Automatic Lorry Trailor Lifter
SYNOPSIS
Objective
To deliver the material from the storing point to the particular place.
To develop the automation in material handling system.
To promote the convenient method of discharging the materials on
three directional side for sand ,stone, wood etc .
Project Background
In the present situation , the
of
materials like sand through the automotive system is on one side only i.e
rear side of vehicle. This project is designed to discharge the materials on
any one of the three sides ( i.e right ,left and rear side )for our convenient ..
ABSTRACT;
In our project FABRICATION OF AUTOMATIC LORRY TRAILOR
LIFTER we made trailer to transport the components
as a prototype for
to 6 bar.The maintenance required for this system is less than the other
systems.
PROJECT ELEMENTS;
Micro Controller based control system
Programming software
Power Supply 12VDC
Air cylinder ( 4nos)
5/2 way solenoid operated directional control valve (4nos)
Block Diagram;
Start /stop
switch
Power
Supply
Limit switch
MICRO
CONTROLLER
Solenoid valve 1
RIGHT SIDE
Solenoid valve 2
LEFT SIDE
Solenoid valve 3
REAR SIDE
Solenoid valve 3
LIFTING