The designers Owen Dennis and Jake Blosveren were tasked by Six Year-Old Nephews Inc. to create a visually attractive and creative toy car that is fairly difficult for a six year old. They will design a Bugatti in Autodesk Inventor that fits within 4" x 3" x 2", has at least a two part chassis and body, wheels, and meets other constraints for potential 3D printing.
The designers Owen Dennis and Jake Blosveren were tasked by Six Year-Old Nephews Inc. to create a visually attractive and creative toy car that is fairly difficult for a six year old. They will design a Bugatti in Autodesk Inventor that fits within 4" x 3" x 2", has at least a two part chassis and body, wheels, and meets other constraints for potential 3D printing.
The designers Owen Dennis and Jake Blosveren were tasked by Six Year-Old Nephews Inc. to create a visually attractive and creative toy car that is fairly difficult for a six year old. They will design a Bugatti in Autodesk Inventor that fits within 4" x 3" x 2", has at least a two part chassis and body, wheels, and meets other constraints for potential 3D printing.
The designers Owen Dennis and Jake Blosveren were tasked by Six Year-Old Nephews Inc. to create a visually attractive and creative toy car that is fairly difficult for a six year old. They will design a Bugatti in Autodesk Inventor that fits within 4" x 3" x 2", has at least a two part chassis and body, wheels, and meets other constraints for potential 3D printing.
Our company has been tasked with creating a toy car,
preferably appealing to a six year old. We must make one that is visually attractive, creative, and fairly difficult. We must Also use the software Autodesk Inventor to create it and maybe eventually 3-D print it out.
Design Statement:
We will create a Bugatti that fits the constraints and
requirements displayed below. It fits into our categories and should have a balance of difficulty and looks when we create it in Autodesk Inventor.
Prototype of final design must fit inside a 4x 3 x 2
shipping box
Car must be designed in at least 2 parts including
chassis and body
Body must mechanically connect to the chassis so
that the car functions as a single piece when completed
Wheels must be included in the design
Wheels can be an integral part of the chassis or be
connected to a separate axle
Constraints:
Project Lead The Way, Inc. Copyright 2012 IED Design Brief Template Page 1