Professional Documents
Culture Documents
Assignment 2 Et1 May-Sept 2015
Assignment 2 Et1 May-Sept 2015
Assignment 2
Programme
: DEE / DMT
Course Title
: ELECTRICAL TECHNOLOGY 1
Semester
: MAY-SEPT 2015
Student Name
Group
Date of Issued
: 19 AUGUST 2015
Lecturer
Upon Submission
Date Received
Lecturer Feedback
Evaluation (Marks % )
Lecturers Signature
Date:
Question 1
a) Determine the capacitance, C of a parallel plate capacitor having a
plate area, A of 0.005 m2 and a plate separation, d of 7.62 x 10-5 m.
The dielectric is ceramic, which has dielectric constant, r of 1200.
Figure 1
b) In Figure 1, determine the energy stored in the capacitor.
c) In Figure 1, determine the charging and discharging voltage of
capacitor at following time and draw the charging and discharging
curve.
i.
0 ms
ii.
4 ms
iii.
8.2 ms
iv.
10 ms
Question 2
Figure 2
a) A student wrap 100 turns of wire, N on a pencil that is 7mm in
diameter, (d=2r) as shown in Figure 2. The pencil is a nonmagnetic
core so has the same permeability as a vacuum, (4 x 10-6 H/m).
Determine the inductance of the coil that is formed.
Figure 3
b) In Figure 3, determine the energy stored in the inductor.
c) In Figure 3, determine the charging and discharging current at the
following time and draw the charging and discharging curve.