REFERENSI

[1] Wilastari, S., Bayuseno, AP. , Nugroho S. (2011). Pengaruh Variasi Kecepatan
Putar Dalam Metode Stir Casting Terhadap Densitas dan Porositas Al-SiC Untuk
Aplikasi Blok Rem Kereta Api. Semarang
[2] Kaufman, J.G., & Rooy, L.E. (2004). Aluminum alloy castings: Properties,
Processes, and Aplications. ASM Internasional.
[3] Singh, D., & Singh S (2012). An Experimental Investigastion of Mechanical
Behavior by Adding SiC and Alumina. Internasional Journal on Emerging
Technologies 3(1): 178-184.
[4] Rana, R.S, & Purohit, R (2012). Reviews on the Influence of Alloying Elements
on the Microstructure and Mechanical Properties of Alumunium Alloys and
Alumunium Allo Composite. Internasional Journal of Scientific and Research
Publication, Volume 2, Issues 6.
[5] Suharno, B, & Evan, T. (2007). Peranan Modifier Stronsium Terhadap Fluiidtas
dan Perubahan Morfologi Stuktur Silikon pada Master Alloy Al-7%Si dan Al11%Si. Volume 13, 175-180.
[6] Merlin, M. & Luca, G (2009). Mechnical and Microstructural Characterisation
of A356 Castings Realised With Full and Empty Cores. Volume 27.
[7] URL:http://www.adhesionbonding.com/
[8] Moniago, A. & Abda, S. (2013). Karakterisasi Komposit Matriks Logamm AlSiC Pada Produk Kanvas Rem Kereta Api. Volume 6.
[9] Sanggaleh, A. & Halali, M. (2009). Effect of Magnesium Addition On The
Wetting of Alumina by Aluminium. Applied Surface Science, 8202-8206.
[10] Razaghian, A. & Emamy, M. (2009) Sr Effect On The Microstructure and
Tensile Properties of A357 Aluminum Alloy and Al2O3/SiC-A357 Cast
Composites. Material Characterization 60, 1361-1369.
[11] Kala, H. & Kumar, S. (2014). A Review on Mechanical and Tribological
Behaviors of Stir Cast Aluminum Matrix Composite. 3rd Internasional Conference
on Material Processing and Characterization.