Professional Documents
Culture Documents
Wear Behaviour & Mechanical Properties of Polyacetal
Wear Behaviour & Mechanical Properties of Polyacetal
GUIDE NAME :
MR.RAMANJANEYULU.G
ASSISTANT PROFESSOR,
MECHANICAL ENGINEERING.
ABSTRACT
Polyacetal nanocomposites with various
contents of molybdenum disufide were prepared
by compression moulding or injection moulding
process in order to study the wear behaviour
and mechanical properties(hardness testing and
fracture toughness,etc), respectively.
The effects of content of nanoparticles and wear
volume loss were investigated, respectively and
these nanocomposite materials can be used in
Mechanicalgears , sliding and guiding elements,
housing parts,springs, chains, screws, nuts, fan
wheels, pump parts, valve bodies.
INTRODUCTION
Polyoxymethylene (POM) resin is a kind of
widely used engineering thermoplastic
material, which exhibits good fatigue
resistance, creep resistance and high
impact
strength.
It
has
lowfriction
coefficient due to the flexibility of the linear
molecular chains. It has good wearresistant properties because of its high
crystallinity and high bond energy, so when
sliding against stainless steel it is difficult
to transfer to the metal counter-surface or
form wear debris in the contact area.
LITERATURE SURVEY
S.NO TITLE OF
JOURNAL PAPER
AUTHOR
CONTRIBTUTION RESULTS
OF THE WORK
1.
Study on the
friction and wear
behavior
of POM/Al2O3
nanocomposites
Lan-Hui
Suna, ZhenGuo Yang ,
Xiao-Hui Li
POM and
Aluminium oxide
are combined by
twin screw
extruder
method.Then
they conducted
an amsler
friction and
weartester using
a block-on-ring
arrangement.
It results
in the
increase
of
friction
coefficie
nt
&especi
aly the
wear
volume
increase
s 22
times.
2.
Tribological
properties of
MoS2 nano-balls
as filler in
polyoxymethylen
e-based
K.H. Hua,b, J.
Wangc, S.
Schraubed,
Y.F. Xua, X.G.
Hua, R.
Stenglerd
POM and
molybdenum
disulfide
nanoballs are
combined
together to get
Better
properti
es in
friction
reductio
n by