Professional Documents
Culture Documents
Read Med
Read Med
25
04/17/2014
This readme covers important information concerning Qualcomm USB Host drivers
Table of Contents
1.
2.
3.
4.
5.
d.
a.
removal.
b.
Added support for PID 904B and 904C.
c.
Corrected defination for PID F005.
d.
Added registry settings so that USB serial number is ignored for
specific PIDs.
e.
Take out options to read multi read/write registry values.
Network driver 4.0.0.2
a.
Added support for PID 904B and 904C.
b.
Added DL control feature for internal debugging.
c.
Increased number of I/O buffers to accommodate the burty I/O
characteristics of certain targets.
d.
Refined QMI initialization to block external clients until QMI is
fully initialized.
e.
Added "QCIgnoreErrors" registry item and also added a check to ignore
STATUS_INVALID_PARAMETER for QMI ctl write.
f.
Return FriendlyName for OID_GEN_VENDOR_DESCRIPTION.
g.
Take out options to read multi read/write registry values.
h.
Made changes to dynamically determine number of TX buffers based on
data aggregation state (on/off)
Filter driver 1.0.0.3
a.
Added support for PID 904B and 904C.
Previous Release (Qualcomm USB Host Drivers Version 1.00.00) 1/17/2012
USB Driver updates:
Serial driver 2.0.8.9
a.
Updated all gobi changes
Network driver 4.0.0.1
a.
Updated all gobi changes
Filter driver 1.0.0.2
--------------------------------------------------------------3. KNOWN ISSUES
--------------------------------------------------------------4. BUILD INSTRUCTIONS
To build the drivers:
1. Install the following:
Driver Installation
On All Windows systems (XP/Vista/7/8)
Manual Installation: follow the procedure documented in 80-V46091, point the driver to the fre/chk path (e.g.
QMI\win\build\target\fre\Win7) when system asks for driver files.
Windows 7 might not prompt for the driver installation when a USB
device is plugged in. In this case, open the device manager and
manually install a driver for each device instance by right
clicking on each device with the yellow warning icon and selecting
Update Driver Software.
Finally, select the path to the drivers for the intended operating
system:
Starting with Windows 8 release 8170 and later, the following changes
must be done prior to installation of the test signed serial driver.
Follow the instructions under "On 64-bit Windows systems and ARM"
Go to Details Tab and look at the "Hardware Ids" property and it should
show the VID/PID of the device for Ex. USB\VID_05C6&PID_ in the Value
box. Please identify the correct VID/PID of the Qualcomm Device
Follow the same instructions under On All Windows systems above by selecting
the Browse for driver software on your computer -> Search for driver software
in this location and entering the path to the drivers for the target operating
system.
After updating the Composite device the QMI clients should start communication
with the device
Driver Upgrade
To update a driver, use one of the following options: