Operational Service Manual
Model Number: 2007 - VM-750
July, 2006 Revision AModel #2007 - VIM-750
For Technical Support and Parts please contact:
PC Manufacturing
120 Woodbine Street
Bergenfield NJ 07621
Phone (201) 244-0131
Fax (201) 244-0156
Techsupport-vending@fortunegroup.net
Gaines Vending / Page 1
PC Manufacturing‘Model # 2007 - VM-750
‘TABLE OF CONTENTS,
1 INTRODUCTION
2 INSTALLATION.....
2.1 Components of the machine.
2.2 Unloading the vending machine.
2.3 Location.
24 POWE sooseceeeee es
3 CONFIGURING THE VENDING MACHINE FOR SALES...
3.1 Load products...
3.2 Displaying beverages behind the window...
3.3 Loading the coin changer.
3.4 Setting prices
4 SERVICE MopE.
5 SERVICE AND MAINTENANCE.
5.1 General Maintenance...
5.11 Cleaning.
5.1.2 Clearing coin and bill validator jams.
5.2 Service and technical information...
5.2.1 Electronic Money Control...
5.2.2 Vending motor...
5.2.3 Refrigerator unit
5.2.4 Electrical schematic......
MANUFACTURER'S WARRANTY.
Appendix A...
Please note the “Serial number” of your vending machine in the space below:
Serial number.
The serial number is located on the back of the vending machine on the identification plate. The
serial number is necessary to provide quick service and detailed part information for your vending
‘machine.
Gaines Vending / Page 2
PC Manufacturing