Professional Documents
Culture Documents
First Cut Regulator: 627 Series Self-Operated Pressure Reducing Regulators
First Cut Regulator: 627 Series Self-Operated Pressure Reducing Regulators
First Cut Regulator: 627 Series Self-Operated Pressure Reducing Regulators
Instruction Manual
July 1989
Introduction
Scope of Manual
This manual provides instructions for the installation,
adjustment, maintenance, and parts ordering for the 627
Series regulators. These regulators usually are shipped
separate for line installation, although sometimes they are
shipped installed on other equipment. Refer to the
instruction manual for the other equipment for installation
and operating instructions.
Form 5252
Description
The 627 Series self-operated pressure reducing regulators
(figure 1) are for high and low pressure systems. These
regulators can be used with natural gas, air, or a variety of
other gases. Performance characteristics vary according to
construction (see the AVAILABLE CONFIGURATIONS
specification in table 1).
Specifications
10B3679-D
W4793
Figure 2. Nameplates
D101328X012