Professional Documents
Culture Documents
Call Setup Failure Analysis
Call Setup Failure Analysis
Call Setup Failure Analysis
If High Rxqual for a longer period of time and RLINKT expire ==> Interference
problem.
If Low SS DL, SS DL < MS SENS ( -104dBm) ==> low signal strength problem.
If TA > 63 ==> too far from the cell.
If DL radio is good, check the TX power. If there is MS power down regulation
when the MS is close to the cell. If full power ==> suspect uplink interference or
antenna, TMA problem.
Verify or isolate the problem using STS (Drop call and reasons).