Professional Documents
Culture Documents
College of Engineering, Computer Studies and Architecture Final Problem Set in SRBN01E
College of Engineering, Computer Studies and Architecture Final Problem Set in SRBN01E
College of Engineering, Computer Studies and Architecture Final Problem Set in SRBN01E
A 100 N block is placed on top of a 250 N wedge which lies along a ramp of 30 inclination.
1. Determine the maximum value of P if the block will remain in equilibrium.
2. What is the minimum value of the coefficient of static friction if the wedge is to remain
in equilibrium.
3. If the force P is applied in the opposite direction (to the left), find the minimum value of
the coefficient of static friction if the wedge is to remain in equilibrium.
PART II. CENTROID
Determine the centroid of the figure shown above with respect to axes indicated.
PART III. MOMENT OF INERTIA
Prepared by: Engr. Correa
CoECSA-DOEA
Page 1 of 2
Name: ________________________
The figure shown is an area bounded by 2 pairs of tangent semi-circles at point O (8 quarter
circle arcs) of radius 30 cm. Determine the polar moment of inertia at point O.
PART IV. DISTRIBUTED LOAD
Solve for the equivalent concentrated load for each of the distributed load shown, triangular,
parabolic spandrel, and semi-parabola whose vertices are both at point B, in order to
determine the reactions at the support.
PART V. SHEAR and BENDING MOMENT DIAGRAM
Draw the shear and bending moment diagram of the beam shown above.
Prepared by:
Page 2 of 2
COECSA-DOEA