Professional Documents
Culture Documents
Call Processing in Ocb 283
Call Processing in Ocb 283
Call Processing in Ocb 283
DEC message: OFF HOOK event- Contains ADUT(1-16)/Terminal No.015/EVS ( Start of event)
- TABAS card to SVCUT message on HDLC format
- SVCUT has TS ( TIMESLOT)- CN ( concentrator) correspondence table
- Free TS to SMX is processed by SVC 7 coupler board and provides this
information in CSN context reference.
- CSN reference has information to setup/supervise/break communication
3.0
The loop continuity between CN and UCN is tested by BCL message. BCL
message is received in microprocessor of CN and it extends a software loop. The
UCN then completes the test by sending tone samples in the TS.
NOVAP message:
-
3.1
Reception of new call message by PUPE and MRNOVAP message is from UCN thro SMX to PUPE on TS 16 of LR 0
and LR 1.
NOVAP is a CCS 7 message
NOVAP contains CSN reference /CN No./UT no./Terminal no./ TSLR No./signaling Link selected .
PUPE has TS- CSN correspondence table and finds UR number of CSN sending
NOVAP.
OUNAP message:
-
4.0
4.1
5.0
CALLER DISCRIMINATION
MR requests TR ( Translator) information as to whether
DTMF/Incoming only
TR replies from translator file regarding eligibility characteristics of
UT thro RDIDR message to MR ( MULTI REGISTER)
MR orders RGF connection for DTMF instrument for recognition of
digits.
OCXGT message:
-
6.0
ACNAP message:
-
7.0
MR acknowledgement to CSN.
Intimates CSN of the register supervising the call set up
ACNAP is processed by SVC7
Contains MR/CSN reference/Signalling link selected/CSN-CN-UTTml. No/ TS-LR no.
CSN removes loop extended during continuity check
MR reference is stored by CSN in TMUC board.
OABCO message:
-
RIANA
-
9.0
ACTIVITY BY CSN:
-
OCXGT message
MR upon receiving TESPO orders RBT connection from MLCOM to
calling sub throOCXGT
MLCOM connects RBT to allotted TS of calling sub
MR gets UR-LR --- SMX-LRX for called sub TS from MQ
ACTIVITIES OF MR/TX :
-
Conversation is through
11.1 SUB STATUS SUPERVISION:
-