Professional Documents
Culture Documents
2007 Cat Shop Supplies and Hand Tools
2007 Cat Shop Supplies and Hand Tools
2007
Cat Shop
Supplies and
Hand Tools
(USA)
1.800.541.8665 option 4
(Illinois)
1.800.523.8665 option 4
(Canada)
(Geneva Phone)
(Geneva Fax)
PECJ0003
(Replaces GECJ0001-01)
www.cat.com
Printed in USA
2006 Caterpillar
PECJ0003
1.800.542.8665 option 4
s00.qxp
9/15/06
1:35 PM
Page 1
Introduction Section
s00.qxp
9/15/06
1:35 PM
Page 2
Warranty
Introduction
Caterpillar Responsibilities
If a defect in material or workmanship is found during the warranty period stated above,
Caterpillar will, during normal working hours and at a place of business of a Caterpillar
dealer or other source approved by Caterpillar, provide (at Caterpillars choice) new or
repaired parts or assembled components needed to correct the defect.
Note: Items replaced under this warranty become the property of Caterpillar.
User Responsibilities
The user is responsible for:
For Designated Hand Tools, Contractor Products, Shop Supplies, and Power Tools, the
warranty periods may be Lifetime, 12 months, or 6 months or as otherwise identified in the
Caterpillar Shop Supplies, Tools, and Contractor Products Warranty Information CD
(PERJ0051).
For Caterpillar Branded Paints, Chemicals, and Shop Fluids, warranty coverage is for
defects at time of purchase or as otherwise identified in the Caterpillar Shop Supplies, Tools,
and Contractor Products Warranty Information CD (PERJ0051).
Caterpillar is not responsible for failures resulting from alterations, abuse, neglect, normal
wear or any use in which Caterpillar judges improper.
The Caterpillar Dealer Service Tool Catalog (NENG2500) and the Caterpillar Shop Supplies,
Tools, and Contractor Products Warranty Information CD (PERJ0051) are available for
inspection at Caterpillar dealers and other establishments authorized by Caterpillar.
SELF5389-01
Limitations
For products operating outside of Australia, Fiji, Nauru, New Caledonia, New Zealand,
Papua New Guinea, the Solomon Islands and Tahiti, the following is applicable:
For products operating in Australia, Fiji, Nauru, New Caledonia, New Zealand,
Papua New Guinea, the Solomon Islands and Tahiti, the following is applicable:
SELF5389-01
s00.qxp
9/15/06
1:35 PM
Page 3
Introduction
Dealer Introduction
The Shop Supplies and Tools Catalog is a publication that incorporates all of the shop supplies, general
purpose hand tools, tool boxes, personal safety items and chemicals, lubricants and adhesives for dealer
and customer service shops.
All orders placed from the Caterpillar Miscellaneous Material Order System for this publication will
automatically place you on a subscription list.
If you do not wish to receive the supplements and do not wish to be added to the subscription list when
you order, you must place a verbal order with your order analyst and tell the order analyst at that time not
to add your name to the subscription mailing list. However, doing this will prevent you from automatically
receiving updates to this catalog in the future.
Ordering Procedure
The majority of the products listed in PECJ0003 are stocked at Caterpillar parts facilities. Select paint
and chemical products listed in PECJ0003 are not stocked but are distributed through Caterpillar's
Direct Ship program. All products in PECJ0003 can be ordered through the Caterpillar Parts Distribution
System using existing stock or emergency ordering procedures.
Contact Information
1.800.542.8665, option 4 (USA)
1.800.541.8665, option 4 (Ilinois)
1.800.523.8665, option 4 (Canada)
SSHT@cat.com (Internet e-mail)
++41 (22) 849 40 48/ 4428 (Geneva Phone)
++41 (22) 849 49 29 (Geneva Fax)
s00.qxp
9/15/06
1:35 PM
Page 4
01a.qxp
10/5/06
1:23 PM
Page i
Hand Tools
Hand Tools (Inch)
Tool Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Socket Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9
Individual Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-17
Ratchets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-20
Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-21
Wrench Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-23
Hand Tools (Metric)
Socket Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-26
Individual Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-32
Wrench Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-34
Individual Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-35
Miscellaneous Hand Tools
Ratchet Wrenches / Wrenches . . . . . . . . . . . . . . . . . . . . 1-37
Sockets / Screwdrivers . . . . . . . . . . . . . . . . . . . . . . . . . . 1-44
Hacksaws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-45
Pry Bars / Hammers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-46
Slide Sledge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-47
Shovels and Spades / Level / Tapes . . . . . . . . . . . . . . . 1-49
Gauges / Magnets / Pipe Wrenches . . . . . . . . . . . . . . . 1-50
Cutters / Pliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-51
Punches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-52
Chisels / Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-53
Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-54
Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-55
Grease Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-56
Torque Wrenches
Click Type and Dial Type Torque Wrenches . . . . . . . . . . 1-58
Extensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-59
Torque Multipliers / Degree Wheel . . . . . . . . . . . . . . . . 1-60
Testers / Air Regulated Torque Wrench Set . . . . . . . . . 1-61
Pneumatic Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-62
Hydraulic Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-63
Hydraulic Pumps / Impact Wrench . . . . . . . . . . . . . . . . 1-65
Pneumatic Tools
Impact Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-66
Sanders and Polishers . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-69
Air Grinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-70
Air Drills / Air Hammers . . . . . . . . . . . . . . . . . . . . . . . . . 1-71
Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-72
Electrical Tools
Grinders / Drills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-75
Saw Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-76
Casting Salvage
Thread Repair Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-77
Crack Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-78
Tool Boxes
Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-79
Metal Storage Chests / Lock . . . . . . . . . . . . . . . . . . . . . 1-82
Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-83
Plastic Tool Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-84
Cases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-85
Slings
Slings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-88
01a.qxp
10/5/06
1:23 PM
Page ii
01a.qxp
10/5/06
1:23 PM
Page 1
Tool Sets
Hand Tools
ID: C33421T1
Description
Size
Description
Size
8H-8567
8H-8568
8H-8535
Socket
114 in
8H-8536
Socket
8H-8569
1516 in
8H-8537
Socket
8H-8570
112 in
8H-8571
in
8H-8539
Socket
158 in
4 in
8H-8538
Socket
8H-8576
Adapter
11116 in
8H-8540
Socket
8H-8562
Universal Socket
134 in
8H-8541
Socket
8H-8563
Universal Socket
178 in
8H-8564
Universal Socket
8H-8542
Socket
2 in
8H-8543
Socket
8H-8565
Universal Socket
218 in
in
8H-8544
Socket
8H-8566
Universal Socket
2316 in
in
8H-8504
Socket
239-6824
Reversible Ratchet
214 in
160-6389
3
4
8H-8574
Socket Extension
in
8H-8546
Breaker Bar
3
4
8H-8575
Socket Extension
in
162-8716
8H-8573
Speeder Handle
in
8H-8548
Socket Extension
8S-2274
in
Combination Wrenches
8S-2284
Universal Socket
in
4C-9604
Combination Wrench
1
4
4C-9605
Combination Wrench
5
16
4C-9592
Combination Wrench
3
8
4C-9593
Combination Wrench
7
16
4C-9594
Combination Wrench
1
2
4C-9595
Combination Wrench
9
16
in
1S-0254
Combination Wrench
9
16
in (short)
4C-9596
Combination Wrench
5
8
4C-9597
Combination Wrench
11
4C-9598
Combination Wrench
3
4
in
in (short)
16
2
16
8
4
8
8
8
8
in
in
16
8
in
in Female to 12 in Male
16
2
in
in
in
in
1S-0259
8H-8549
8H-8550
8H-8551
11
16
8H-8552
8H-8553
13
16
8H-8554
8H-8555
15
16
8H-8556
1 in
1S-0253
Combination Wrench
3
4
8H-8560
Universal Joint
in
4C-9599
Combination Wrench
13
8H-8561
Adapter
in Female to 34 in Male
4C-9601
Combination Wrench
7
8
239-6826
Reversible Ratchet
in
4C-9602
15
8H-8559
Socket Extension
4C-9603
Combination Wrench
1 in
168-0383
Breaker Bar
in
8H-8516
Combination Wrench
116 in
8H-8517
118 in
in
16
in
8 in
2
2
2
2
2
in
in
in
in
in
in
in
in
in
16
16
in
in
in
16
in
8H-8529
Socket
in
8H-8518
Combination Wrench
114 in
8H-8530
Socket
in
8H-8519
Combination Wrench
1516 in
8H-8531
Socket
15
16
8H-8520
Combination Wrench
138 in (short)
8H-8532
Socket
1 in
8H-8424
Combination Wrench
112 in
8H-8533
Socket
1116 in
8H-8423
Combination Wrench
158 in
8H-8534
Socket
118 in
8H-8501
1
2
4
8
in
in x 916 in
01a.qxp
10/5/06
1:23 PM
Page 2
Hand Tools
Tool Sets
Description
Size
Description
Size
Punch1
8H-8578
Punch1
1F-1160
Chisel1
1F-1161
Chisel1
6V-6193
6V-6192
6V-6195
6V-6194
8H-8582
8H-8580
6V-7937
Screwdriver Cabinet
6V-7933
277-8790
6V-7934
Screwdriver
6V-7935
Screwdriver
6V-7936
Screwdriver
8H-8577
2 lb
6V-7938
Screwdriver
1S-0257
Ball Peen
Hammer1
12 oz
6V-7932
Screwdriver
1S-0258
32 oz
5F-4764
Crowfoot Bar1
8H-8581
Feeler Gauge1
1F-1159
Center Punch1
8S-1602
Tool Box
261-0444
Adapter
8S-1589
Socket
8S-1590
Socket
8S-1591
Socket
8S-1592
Socket
8S-1593
Socket
8S-1594
Socket
8S-1595
Socket
8S-1596
Socket
11
16
8S-1597
Socket
8S-1598
Socket
13
16
8S-1599
Socket
8S-1600
Socket
15
16
8S-1601
Socket
1 in
2
4
in Female to
in
16
8
in Male
in
in
in
16
8
in
16
2
in
in
in
in
in
in
16
in
1 Warranty:
16
Six Months
ID: C33528T1
Description
Size
Description
Size
Socket
in
8S-2284
Universal Socket
9S-1712
Socket
in
8H-8562
Universal Socket
9S-1713
Socket
8H-8563
Universal Socket
9S-1714
Socket
in
8H-8564
Universal Socket
9S-1715
Socket
in
8H-8565
Universal Socket
9S-1716
Socket
11
32
9S-1727
Universal Socket
11
16
9S-1717
Socket
8H-8566
Universal Socket
in
9S-1718
Socket
8S-2274
Socket
in
9S-1719
Socket
8H-8567
Socket
9S-1720
Socket Extension
8H-8568
Socket
9S-1721
Socket Extension
8H-8569
Socket
9S-1722
Socket Driver
in
8H-8570
Socket
239-6823
Reversible Ratchet
in
9S-1728
Socket
11
16
9S-1724
Universal Joint
8H-8571
Socket
in
9S-1725
Socket Case
239-6824
Reversible Ratchet
in
9S-2573
8H-8573
Speeder Handle
8H-8574
Socket Extension
3 in
8H-8575
Socket Extension
6 in
8H-8576
Adapter
in Female to 12 in Male
261-0444
Adapter
in Female to 38 in Male
8S-1589
Socket
in (12 Point)
8S-1590
Socket
9S-1711
16
32
4
in
32
16
in
8 in
16
2
4
4
in
in
in
in
16
2
16
8
4
8
4
8
8
2
4
in
in
in
16
8
in
in
16
2
in
in
in
in
16
in
in (12 Point)
01a.qxp
10/5/06
1:23 PM
Page 3
Tool Sets
Part No.
1
Description
Size
Description
Size
Socket
8H-8549
Socket
8H-8550
Socket
8H-8551
Socket
11
16
8H-8552
Socket
8H-8553
Socket
13
16
8H-8554
Socket
8H-8555
Socket
15
16
8H-8556
Socket
1 in
1S-0259
in
16
8
in
in
in
in
in
in
in
1
16
in
1F-1159
Center Punch1
8H-8578
Punch1
8H-8579
Punch1
1F-1160
Chisel1
1F-1161
Chisel1
16
8
32
8
4
Bar1
5F-4764
Crowfoot
6V-7933
Screwdriver
6V-7937
Screwdriver
6V-7935
Screwdriver
6V-7932
Screwdriver
9S-1729
Socket
9S-1730
Socket
118 in
6V-7936
Screwdriver
4
8
9S-1731
Socket
114 in
6V-7934
Screwdriver
239-6826
Reversible Ratchet
in
6V-6193
Diagonal Cutter
168-0383
Breaker Bar
in
8H-8582
Vise Grip
8H-8559
Socket Extension
6V-6194
9S-1732
Socket Extension
6V-6192
6V-6195
2
2
Combination Wrenches
8H-8501
in x 916 in
1S-0257
4C-9604
Combination Wrench
in
1S-0258
4C-9605
Combination Wrench
4C-9592
Combination Wrench
8H-8580
Scraper1
4C-9593
Combination Wrench
8H-8581
Feeler Gauge1
4C-9594
Combination Wrench
208-6183
Hacksaw
4C-9595
Combination Wrench
9S-1743
4C-9596
Combination Wrench
9S-1742
9 bits
4C-9597
Combination Wrench
11
16
4C-9598
Combination Wrench
4C-9599
Combination Wrench
13
16
4C-9601
Combination Wrench
4C-9602
Combination Wrench
15
16
4C-9603
Combination Wrench
1 in
1S-0253
Combination Wrench
1S-0254
Combination Wrench
2
4
16
8
in
in
16
in
2 in
16
8
in
in
in
1 Warranty:
in-1 in
Six Months
4 in
in
in
in
in (short)
16
in ( short)
1U-7321
Standard Flashlight
2P-5490
5P-1720
Seal Pick
5P-3277
Measuring Tape
5P-3920
Steel Rule
8T-0461
139-2645
Safety Glasses
146-2728
194-3574
194-3576
194-3578
194-3584
194-3585
Hand Tools
01a.qxp
10/5/06
1:23 PM
Page 4
Hand Tools
Tool Sets
Description
Part No.
Description
1S-0259
8H-8555
4C-9592
Combination Wrench, 38 in
8H-8556
4C-9594
Combination Wrench, 12 in
8H-8559
4C-9595
4C-9596
Combination Wrench, 58 in
8H-8581
4C-9598
Combination Wrench, 34 in
4C-9601
Combination Wrench, 78 in
9S-1730
4C-9603
Combination Wrench, 1 in
9S-1732
4C-9605
239-6826
5F-4764
185-3630
6V-7934
211-0136
212-8144
212-8145
213-1983
Combination Pliers,
167.0 mm (6.60 in) long
1
4
6V-7935
8F-9866
Grease Gun
8H-8549
8H-8554
Socket,
7
8
in,
1
2
ID: D00905T1
in drive, 12 Pt.
Part No.
Description
Part No.
Description
1P-0545
8H-8541
1S-0259
8H-8549
4C-9592
Combination Wrench, 38 in
8H-8551
1
2
4C-9594
Combination Wrench,
8H-8552
4C-9595
8H-8553
4C-9596
Combination Wrench, 58 in
8H-8554
4C-9597
8H-8555
8H-8559
8H-8581
9S-1730
185-3630
3
4
in
4C-9598
Combination Wrench,
4C-9605
5F-4764
6V-7932
in
3
8
6V-7934
9S-1731
8F-9866
Grease Gun
212-8144
8H-8536
212-8145
8H-8537
8H-8538
213-1985
ID: C66976T1
01a.qxp
10/5/06
1:23 PM
Page 5
Tool Sets
Hand Tools
Description
Part No.
Description
8H-8549
Socket, 916 in
4C-9594
Combination Wrench, 12 in
8H-8552
Socket, 34 in
4C-9595
8H-8554
Socket, 78 in
4C-9598
Combination Wrench, 34 in
8H-8556
Socket, 1 in
5F-4764
8H-8559
Socket Extension,
1 in, 254.0 mm (10.00 in) long
2
8F-9866
Grease Gun
185-3630
239-6826
Reversible Ratchet
212-8144
Petcock Socket
9U-7419
Hex Bit
213-1983
Pliers
6V-7935
Screwdriver, 14 in Tip
211-0136
261-0444
ID: D00473T1
Part No.
Description
Wrench sizes (English), 716, 12, 1316, 78 and 1516
Wrench sizes (Metric), 14 and 17
Socket size (English and Metric, 12 in drive),
15 and 17.0 mm
16
185-3630
Strap Wrench
Tool Bag
ID: C78539T1
ID: D00941T1
Part No.
Description
6V-7933
6V-9093
6V-9096
6V-9101
8F-9866
Grease Gun 1
8H-8536
8H-8537
8H-8539
8H-8556
8H-8559
8H-8561
8H-8581
9S-1730
239-6826
185-3630
211-0136
Part No.
Description
212-8145
1P-0545
213-1985
1S-0255
213-3088
4C-9592
Combination Wrench, 38 in
213-6926
4C-9595
Combination Wrench,
213-6929
4C-9598
Combination Wrench, 34 in
213-6933
5F-4764
213-6935
6V-7932
213-6936
9
16
in
1 Warranty:
Six Months
01a.qxp
10/5/06
1:23 PM
Page 6
Hand Tools
Tool Sets
Part No.
Description
Hand wrench sizes SAE,
and 158 in
3 , 13 , 11 , 13
4
16
8
8
ID: C78558T1
1P-0545
185-3630
Strap wrench
Tool Bag
Description
239-6826
261-0444
9S-1732
194-3535
194-3538
194-3565
199-6154
213-6926
213-6927
213-6929
6V-9111
6V-9112
Part No.
Description
6V-9113
6V-9102
6V-9116
6V-9103
1U-7563
6V-9104
1U-7564
214-7222
1U-7565
214-7223
1U-7566
8H-8424
1U-7567
214-7330
1U-7569
214-7329
1U-7585
Hex Wrench, 58 in
185-3630
6V-9096
8F-9866
Grease Gun
6V-9098
5F-4764
6V-9099
9U-7968
Pry Bar
6V-9101
6V-7932
1S-0255
8H-8577
8H-8581
9U-6219
Tool Box
ID: C44388T1
01a.qxp
10/5/06
1:23 PM
Page 7
Tool Sets
Hand Tools
Part No.
Description
8H-8549
Socket, 916 in
8H-8556
Socket, 1 in
8H-8559
8H-8581
Feeler Gauge
6V-7932
4C-9592
Combination Wrench, 38 in
4C-9595
4C-9598
Combination Wrench, 34 in
5F-4764
8F-9866
Grease Gun
185-3630
213-1985
Sliding T-Handle
ID: A92065T1
Hex wrench
4.0 mm
Screwdrivers
16 oz.
Adjustable wrench
8.00 in
334 in diameter
Deep socket
Description
Part No.
Description
1P-0545
6V-9097
Wrench, 17.0 mm
8H-8546
6V-9099
Wrench, 19.0 mm
162-8716
Handle
185-3630
8H-8548
Extension
199-6150
Socket, 13.0 mm
8H-8559
Extension
6V-9112
Socket, 17.0 mm
213-1985
Sliding T-Handle
6V-9114
Socket, 19.0 mm
8H-8581
Feeler Gauge
6V-9116
Socket, 22.0 mm
6V-7932
Screwdriver
199-6154
Socket, 24 mm
6V-7934
Screwdriver
6V-9118
Socket, 30 mm
5F-4764
Pry Bar
6V-9119
Socket, 36 mm
8F-9866
6V-9120
Socket, 46 mm
1U-5548
Wrench, 8.0 mm
212-8145
Plug Socket
6V-9090
Wrench, 10.0 mm
212-8144
Petcock Socket
6V-9093
Wrench, 13.0 mm
ID: C79718T1
01a.qxp
10/5/06
1:23 PM
Page 8
Hand Tools
Tool Sets
Part No.
Description
Part No.
Description
Part No.
Description
1B-7810
161-5346
Shackle, qty. 4
1B-7810
1P-0545
161-5347
Link, qty. 4
1P-0545
1P-2853
Spanner Wrench
161-8953
1U-5545
1U-5545
161-8956
Cleaning Hook
4C-5742
4C-5742
164-3171
Spanner Wrench
4C-9600
4C-9600
164-5047
Chain Tool
5P-0946
Tool Box
5F-4764
224-0851
Chain
6V-3989
6V-3989
224-0853
Chain
6V-4143
6V-6195
Pliers
197-3672
6V-7933
6V-7933
6V-7934
6V-7934
6V-7935
Screwdriver, 14 in tip
6V-7935
Screwdriver, 14 in tip
6V-7936
6V-7936
6V-7937
6V-7937
6V-9102
Wrench, 22.0 mm
6V-9102
Wrench, 22.00 mm
6V-9104
Wrench, 30.0 mm
6V-9104
Wrench, 30.00 mm
6V-9124
Screwdriver, 18 in tip
6V-9124
Screwdriver, 18 in tip
8F-9866
8F-9866
8H-8516
Wrench, 1116 in
8H-8423
Wrench, 158 in
8H-8520
Wrench, 138 in
8H-8516
Wrench, 1116 in
8T-0856
Pressure Gauge
8H-8520
Wrench, 138 in
8T-0859
Pressure Gauge
8H-8559
8T-0861
Pressure Gauge
8T-0855
Pressure Gauge
8T-5183
Drive Extension
8T-0859
Pressure Gauge
9U-6533
8T-0861
Pressure Gauge
239-6824
8T-5183
Drive Extension
239-6826
9U-6219
Tool Box
127-2279
9U-6533
Impact Socket, 30 mm
160-6389
9U-6536
Impact Socket, 33 mm
161-8958
239-6824
162-8716
160-6389
175-7546
Cutter Group
161-8953
177-7860
Hose Assembly
161-8954
File
185-3630
Wrench Assembly
161-8955
File Handle
194-3585
161-8958
200-1929
162-8716
214-7218
Wrench, 27 mm
163-4468
214-7223
Wrench, 36 mm
164-3171
Spanner Wrench
214-7324
175-7546
Cutter Group
214-7330
185-3630
Wrench Assembly
214-7332
194-3574
214-7342
194-3585
200-1929
214-7218
Wrench, 27 mm
214-7223
Wrench, 36 mm
214-7324
214-7330
214-7332
214-7333
214-7342
01a.qxp
10/5/06
1:23 PM
Page 9
Hand Tools
Description
Part No.
Description
8F-9866
Grease Gun
6V-9101
ID: C80516T1
6V-9102
6V-7933
6V-9103
239-6826
1U-7563
9S-1732
1U-7564
185-3630
1U-7565
5F-4764
1U-7566
6V-7934
1U-7567
6V-9096
1U-7569
6V-9098
1U-7585
6V-9099
8H-8581
Part No.
Description
Part No.
Description
239-6826
6V-9102
6V-9103
9S-1732
Socket Extension, 12 in drive,
127.0 mm (5.00 in) long
6V-9104
194-3565
214-7223
199-6154
214-7329
213-6926
214-7322
Adjustable Wrench, 8 in
213-6927
200-1929
213-6929
214-7324
6V-9111
256-4879
6V-9113
185-3630
6V-9116
8F-9866
Grease Gun
1U-7585
Hex Wrench, 58 in
9U-7968
Pry Bar
6V-9096
6V-7932
6V-9098
6V-9099
8H-8577
6V-9101
9U-6219
Tool Box
12 point
1 inch square drive
4
Standard length sockets
Chrome finish
Length
in
9S-1711
in
9S-1712
9S-1713
32
Part No.
Description
Size
9S-1720
Socket Extension
9S-1721
Socket Extension
Socket Driver
239-6823
Reversible Ratchet
in
9S-1724
Universal Joint
213-4437
in female to 38 in male
261-0443
in female to 14 in male
9S-1725
Case1
Part No.
16
Accessories included
9S-1722
Size
4
4
4
8
in
in
in
9S-1714
in
9S-1715
9S-1716
9S-1717
32
16
11
32
3
in
16
in
in
in
9S-1718
9S-1719
ID: C07884T1
01a.qxp
10/5/06
1:23 PM
Page 10
Hand Tools
Socket Sets
Size
Part No.
Length
in
213-9967
in
213-9968
213-9969
16
32
6 point
1 inch square drive
4
Deep length sockets
Chrome finish
Includes socket bar and clips
in
in
213-9970
in
213-9971
213-9972
213-9974
32
16
11
32
3
in
16
in
in
16
ID: C33405T1
in
in
213-9978
213-9980
213-9981
Part No.
Length
8S-2274
16
8H-8567
8H-8568
16
8H-8569
8H-8570
9S-1728
8H-8571
in
in
in
in
in
11
16
3
in
in
Accessories included
Description
239-6824
Reversible Ratchet
Size
8H-8573
Speeder Handle
8H-8574
Socket Extension
8H-8575
Socket Extension
ID: C79490T1
Part No.
Size
Part No.
Length
3
8
214-1144
in
7
16
1
2
9
16
5
8
ID: D00437T1
in
in
in
in
11
16
3
4
in
in
214-1145
214-1146
214-1147
214-1148
214-1149
214-1150
SAE / Metric impact sockets quickly and easily remove damaged or rounded nuts and bolts
6 fluted sockets grip onto fastener and tighten as more torque is applied (no hammering required to install socket over fastener)
Applications include oil pan drain plugs, exhaust manifold nuts, studs, pipe nipples, and corroded marine fasteners
Shallow depth
Fits sizes from 10 to 19 mm (38 to 34 inch)
3 inch square drive
8
Standard length
Industrial black finish
Includes plastic tray, socket bar, and clips
Can be ordered by set or individual
ID: D00971T1
Size
Part No.
10 mm
241-0860
12 mm
241-0861
13 mm
241-0862
14 mm
241-0863
15 mm
241-0864
17 mm
241-0865
241-0866
in
Length
11 mm
241-0867
2 in
241-0868
16
241-0869
16 mm
241-0870
11
16
in
241-0871
19 mm
241-0872
in
01a.qxp
10/5/06
1:23 PM
Page 11
Socket Sets
Size
Part No.
214-1152
214-1153
in
in
16
6 point
3 inch square drive
8
Deep length sockets
Polished chrome finish
Includes socket bar and clips
in
in
16
in
11
16
3
in
in
13
16
7
in
in
Length
214-1154
214-1155
214-1156
214-1157
214-1158
214-1159
214-1160
ID: C33206T1
Size
Part No.
Length
3
8
214-6491
in
7
16
12 point
3 inch square drive
8
Deep length sockets
Chrome finish
Includes socket bar and clips
1
2
9
16
5
8
11
13
in
in
16
3
4
ID: D00443T1
in
in
16
7
8
in
in
in
in
214-6492
214-6493
8S-2357
9S-5031
214-6494
214-6495
214-6496
6V-0199
Size
Part No.
271-4601
271-4602
16
in
6 point
3 inch drive
8
Standard length sockets
Includes socket bar and clips
in
16
in
in
16
in
in
11
16
3
13
16
ID: D01750T1
in
in
in
in
15
16
1 in
in
Length
271-4603
271-4604
271-4605
271-4606
271-4607
271-4608
271-4609
271-4610
271-4611
271-4612
12 point
3 inch drive
8
Deep length sockets
Includes socket bar and clips
Size
Part No.
3
8
271-4615
271-4616
in
7
16
1
2
in
9
16
5
8
in
in
in
11
16
3
4
in
in
Length
271-4617
271-4618
271-4619
271-4620
271-4621
Size
Part No.
5
16
271-4670
271-4671
3
8
6 point
3 inch drive
8
Deep length sockets
Includes socket bar and clips
in
7
16
1
2
11
13
in
in
16
7
8
15
in
in
16
3
4
ID: D01738T1
in
in
9
16
5
8
in
in
in
16
1 in
in
Length
271-4672
271-4673
271-4674
271-4675
271-4676
271-4677
271-4678
271-4679
271-4680
271-4681
Hand Tools
01a.qxp
10/5/06
1:23 PM
Page 12
Hand Tools
Socket Sets
Size
Part No.
Drive
2P-5487
in
16
2P-5488
in
2P-5489
in
16
2P-5491
in
2P-5492
in
2P-5493
in
2P-5494
in
2P-5495
in
2P-5496
in
in
in
in
in
in
11
16
3
in
13
16
7
in
in
in
8
8
8
8
8
8
8
8
8
4C-9306
in
ID: 77271-1T1
Size
Part No.
Drive
5P-0324
3
8
in
5P-0325
3
8
in
5P-0326
3
8
in
5P-0327
3
8
in
5P-0328
3
8
in
5P-0329
3
8
in
1 in
5P-0331
3
8
in
1116 in
5P-0332
3
8
in
118 in
5P-0333
1
2
in
114 in
5P-0334
1
2
in
138 in
5P-0335
1
2
in
in
11
16
12 point
May be used with 38 inch or 12 inch drive ratchet or torque wrenches
in
in
13
16
7
in
in
15
16
ID: C58235T1
in
1U-5536
1
2
in
11116 in
5P-0294
1
2
in
239-6826
Reversible Ratchet
168-0383
11
in
13
15
in
in
16
7
8
Size
in
in
16
3
4
in
in
16
in
1 in
Breaker Bar
8H-8549
8H-8550
8H-8551
8H-8552
8H-8553
8H-8554
8H-8555
8H-8556
8H-8559
Socket Extension
1116 in 9S-1729
9S-1732
Socket Extension
118 in
9S-1730
114 in
9S-1731
ID: C79417T1
Length
1S-0259
5
8
Accessories Included
Description
Part No.
1
2
9
16
12 point
12 inch square drive
Chrome finish
Part No.
Size
6 point
1 inch square drive
2
Standard length socketss
Chrome finish
Includes socket bar and clips
Size
Part No.
7
16
214-6500
214-6501
1
2
in
9
16
5
8
in
in
in
11
16
ID: C33207T1
3
4
13
16
7
8
in
in
15
16
in
in
in
Length
214-6503
214-6504
214-6506
214-6507
214-6509
214-6510
214-6511
1 in
214-6512
1116 in
214-6513
118 in
214-6514
01a.qxp
10/5/06
1:23 PM
Page 13
Socket Sets
Size
Part No.
Length
1
2
2P-5475
in
9
16
6 point
1 inch square drive
2
Chrome finish
Includes socket bar and clips
5
8
in
in
11
16
3
4
in
in
13
16
7
8
in
in
15
16
ID: C07892T1
in
1 in
2P-5478
2P-5479
2P-5481
2P-5482
2P-5483
2P-5484
6 point
1 inch square drive
2
Standard length sockets
Black oxide finish
Includes socket bar and clips
ID: D00449T1
6 point
1 inch square drive
2
Deep length sockets
Black oxide finish
Includes socket bar and clips
ID: D00455T1
Size
Part No.
Length
Size
Part No.
213-3087
213-3516
213-3088
213-3517
213-3089
213-3091
213-3094
11
16
213-3099
213-3102
13
16
213-3104
1 in
213-3107
15
16
1116 in
213-3109
1 in
118 in
213-3110
in
16
in
in
11
16
3
in
in
13
16
in
in
15
16
in
2P-5476
2P-5477
12 point
1 inch square drive
2
Deep length sockets
Polished chrome finish
Includes socket bar and clips
16
2
in
16
8
in
in
in
in
in
213-3518
213-3520
213-3521
213-3522
213-3523
213-3524
213-3525
213-3526
1116 in
213-3528
118 in
213-3530
in
Length
in
in
Size
Part No.
1
2
214-1162
214-1163
in
9
16
5
8
in
in
11
16
3
4
in
13
16
ID: C80487T1
7
8
214-1166
214-1167
214-1168
1 in
214-1170
1116 in
214-1171
118 in
214-1172
in
Size
Part No.
Length
8S-2284
in
16
in
in
16
in
in
11
16
ID: B46815T1
214-1164
214-1165
214-1169
12 point
38 inch universal drive
Polished chrome finish
in
in
15
16
in
Length
in
in
8H-8562
8H-8563
8H-8564
8H-8565
9S-1727
8H-8566
Hand Tools
01a.qxp
10/5/06
1:23 PM
Page 14
Hand Tools
Socket Sets
Size
Part No.
Length
3
8
261-8583
in
7
16
1
2
9
16
5
8
in
in
in
in
11
16
3
4
in
in
261-8585
261-8586
261-8587
261-8589
261-8590
261-8591
6 point
1 inch square drive
2
Black oxide finish
Includes socket bar and clips
Size
Part No.
in
214-6521
16 in
214-6522
9
5
in
11
16
3
in
in
Length
214-6523
214-6524
214-6526
ID: C33411T1
6 point
1 inch square drive
2
Black oxide finish
Standard length impact sockets
Includes socket bar and clips
Size
Part No.
Length
Size
Part No.
Length
214-6521
15
246-8176
214-6522
1 in
246-8177
214-6523
1116 in
246-8178
214-6524
118 in
246-8179
214-6526
1 316 in
246-8180
246-8173
114 in
246-8181
246-8175
1516 in
246-8182
Size
Part No.
Length
in
8H-8529
in
8H-8530
8H-8531
1 in
8H-8532
1116 in
8H-8533
118 in
8H-8534
114 in
8H-8535
1516 in
8H-8536
112 in
8H-8537
158 in
8H-8539
11116 in
8H-8538
134 in
8H-8540
in
16
in
in
11
16
3
in
13
16
7
in
in
8 in
16
in
ID: D01125T1
15
16
Accessories Included
Part No.
Description
160-6389
Ratchet Head1
8H-8546
162-8716
Wrench Handle
8H-8548
Socket Extension
Size
ID: C07905T1
in
178 in
8H-8541
2 in
8H-8542
218 in
8H-8543
2316 in
8H-8544
214 in
8H-8504
01a.qxp
10/5/06
1:23 PM
Page 15
Socket Sets
Hand Tools
Size
Part No.
Length
238 in
5S-6077
Part No.
Description
212 in
5S-6078
5S-6092
Tool Box2
258 in
5S-6079
5S-6088
234 in
5S-6080
161-3983
Ratchet Head1
3 in
5S-6081
5S-6089
Wrench Handle
318 in
5S-6082
5S-6076
Socket Extension
314 in
5S-6083
5S-6090
312 in
5S-6084
358 in
5S-6085
334 in
5S-6086
4 in
5S-6087
Size
2 Warranty:
Six Months
ID: C07895T1
Drive
Part No.
Length
in
8S-1589
Part No.
in
8S-1590
8S-1602
Tool Box
in
8S-1591
261-0444
in
8S-1592
in
8S-1593
in
8S-1594
in
8S-1595
in
8S-1596
in
8S-1597
in
8S-1598
in
8S-1599
in
8S-1600
in
8S-1601
in
16
16
in
in
16
in
in
in
in
11
16
3
in
in
13
16
in
in
15
16
ID: B14952T1
Accessories Included
Size
in
1 in
8
8
8
8
2
2
2
2
4
4
4
4
4
Description
Assembly
Hex Bit
1
8
3
8
in
2P-8263
2P-8269
in
Hex
Size
Sq. Drive
Size
Part No.
Overall Length
5
32
in
3
8
in
2P-8264
2P-8271
in
2P-8263
3
16
in
3
8
in
2P-8265
2P-8272
in
3
8
in
8T-3042
8T-3043
in
2P-8266
2P-7274
2P-8273 1
3
8
in
2P-8267
2P-7274
3
8
in
2P-8268
2P-8275
3
8
in
5P-7253
5P-7252
1
2
in
214-7320
214-7321
1
2
in
214-7327
1P-3566
1
2
in
214-7328
214-7331
in
in
in
2P-8264
7
32
in
in
2P-8265
1
4
in
3
8
in
in
8T-3042
1
4
in
in
2P-8266
5
16
in
2P-8267
3
8
in
2P-8268
9
16
in
214-7320
1
2
in
214-7327
9
16
in
214-7328
5
8
32
16
32
in
16
in
8 in
ID: C33212T1
Socket
Hex Size
in
16
in
in
8
8
8
8
8
8
2
2
2
in
in
in
in
in
in
1 Standard
01a.qxp
10/5/06
1:23 PM
Page 16
Hand Tools
Socket Sets
Hex Size
Part No.
Overall Length
in
243-5178
64
in
in
243-5179
32
in
in
243-5180
in
16
in
in
243-5181
32 in
8 in
243-5175
in
in
243-5177
16
in
243-5173
in
243-5174
in
in
ID: D01131T1
Part No.
Description
Size
Use
6V-2123
Socket Assembly
3
8
in square drive
5P-3038
Socket Assembly
3
8
in square drive
5P-8689
Socket Assembly
3
8
in square drive
ID: C33412T1
TORXALIGN Bits
Torx
Size
Sq. Drive
Size
Part No.
Overall
Length
T10
in
194-3531
T15
in
194-3532
T20
in
194-3533
T25
in
194-3534
T30
in
194-3535
T40
in
194-3536
T45
in
194-3537
T50
in
194-3538
T55
in
194-3539
4
4
4
4
8
8
8
8
8
ID: C80070T1
Torx
Size
Sq. Drive
Size
Part No.
Overall
Length
T27
199-9199
in
in
194-3540
ID: D00533T1
Torx
Size
Sq. Drive
Size
Part No.
Overall
Length
E4
1
4
inch
227-4384
22 mm (.88 in)
E5
1
4
inch
227-4385
22 mm (.88 in)
E6
1
4
inch
227-4386
22 mm (.88 in)
E7
1
4
inch
227-4387
22 mm (.88 in)
E8
1
4
inch
227-4388
22 mm (.88 in)
E10
3
8
inch
227-4389
30 mm (1.12 in)
E12
3
8
inch
227-4390
30 mm (1.12 in)
E14
3
8
inch
227-4391
30 mm (1.12 in)
E16
3
8
inch
227-4392
32 mm (1.25 in)
E18
3
8
inch
227-4393
33 mm (1.31 in)
01a.qxp
10/5/06
1:23 PM
Page 17
Individual Sockets
Hand Tools
Size
Part No.
Length
3
8
in
8S-2284
Size
Part No.
Length
16 in
8H-8562
3
8
214-1152
in
8H-8563
7
16
16
8H-8564
1
2
8H-8565
9
16
9S-1727
5
8
8H-8566
11
in
in
11
16
3
in
in
Size
Part No.
Length
8S-2274
16
16
8
in
in
in
in
16
7
8
Part No.
5
16
271-4601
8H-8570
3
8
271-4602
9S-1711
11
16
9S-1728
7
16
9S-1712
in
8H-8571
1
2
9S-1713
in1
8S-1589
9
16
32
in
9S-1714
16
8S-1590
5
8
16
in
9S-1715
8S-1591
11
16
in2
5P-0127
16
8S-1592
3
4
in
9S-1716
9S-1717
16
9S-1718
in
9S-1719
in1
9S-2573
in
1 Deep
length socket
2 Deep
1
4
1 Shoulder
214-6493
Size
Part No.
Length
16
8S-2357
3
8
271-4615
in
in
in
in
in
in
in
1 Comes
7
16
1
2
214-6495
9
16
214-6496
5
8
6V-0199
11
3
4
in
213-9967
32
in
213-9968
4 in
213-9969
32
in
213-9970
Size
Part No.
16
in
213-9971
214-1144
16
in
in
213-9972
16
213-9974
213-9978
16
213-9980
213-9981
11
16
3
in
in
in
in
in
in
9S-5031 1
16
3
8
214-6494
in
3
8
271-4612
Length
in
271-4611
214-6492
in
Part No.
16
in
16
Size
16
1 in
271-4609
271-4610
13
16
15
in
in
in
271-4607
271-4608
Length
8 in
16
5P-4200
13
271-4605
271-4606
Part No.
11
32
in
in
214-6491
11
16
in
in
271-4603
271-4604
8 in
Length
1
4
in
in
Part No.
in
in
Length
Size
Size
16
in
16
7
8
3
in
in
214-1159
214-1160
8H-8569
in
32
214-1157
214-1158
Size
16
11
32
in1
214-1155
214-1156
in1
8H-8567
in1
214-1153
214-1154
8H-8568
Length
in
in
in
Part No.
in
in
in
Size
in
in
in
13
ID: C33413T1
in
in
16
3
4
3
in
in
in
in
in
16
in
in
3
8
271-4616
271-4617
271-4618
271-4619
271-4620
271-4621
Size
Part No.
Length
5
16
271-4670
3
8
271-4671
214-1145
7
16
214-1146
1
2
in
in
in
in
214-1147
9
16
214-1148
5
8
214-1149
11
214-1150
3
4
in
in
16
13
16
7
8
in
in
in
in
15
16
1 in
in
Length
271-4672
271-4673
271-4674
271-4675
271-4676
271-4677
271-4678
271-4679
271-4680
271-4681
01a.qxp
10/5/06
1:23 PM
Page 18
Hand Tools
Individual Sockets
3
4
Size
Part No.
Length
Size
Part No.
Length
Size
Part No.
Length
16
214-6497
1
2
2P-5475
3
4
in
8H-8529
1S-0259
9
16
2P-5476
7
8
in
8H-8530
8H-8549
5
8
2P-5477
15
8H-8531
8H-8550
11
2P-5478
1 in
8H-8532
8H-8551
3
4
2P-5479
1116 in
8H-8533
8H-8552
13
2P-5481
118 in
8H-8534
8H-8553
7
8
2P-5482
114 in
8H-8535
8H-8554
15
2P-5483
1516 in
8H-8536
in
in
16
in
in
11
16
3
13
16
7
in
in
in
15
16
in
in
in
16
in
in
16
in
in
16
in
16
in
8H-8555
1 in
2P-5484
112 in
8H-8537
1 in
8H-8556
118 in
5P-7260
158 in
8H-8539
1116 in
9S-1729
11116 in
8H-8538
118 in
9S-1730
134 in
8H-8540
114
in
9S-1731
178 in
8H-8541
in1
8S-1593
2 in
8H-8542
8S-1594
Size
Part No.
Length
218 in
8H-8543
8S-1595
1
2
213-3087
2316 in
8H-8544
8S-1596
9
16
213-3088
214 in
8H-8504
213-3089
5
8
in1
2P-8276
in1
8S-1597
8S-1598
8S-1599
8S-1600
16
in
in1
in1
11
16
in1
1 Shoulder
1
2
5
8
in
in
in
11
16
1
2
3
4
in
in
213-3091
3
4
213-3094
13
213-3099
7
8
213-3102
15
213-3104
1 in1
8S-1601
212 in2
3P-2230
16
in1
Size
Part No.
Length
13
16
214-6500
7
8
214-6501
15
16
214-6503
1 in
213-3107
214-6504
1116
213-3109
1 Shoulder
214-6506
118 in
213-3110
2 Special
214-6507
in
in
in
in
11
16
3
in
13
16
7
in
in
in
15
16
in
1 in
214-6509
214-6510
214-6511
214-6512
1116 in
214-6513
118 in
214-6514
16
in
16
1
2
Size
1
16
8 in
16
in
in
in
11
16
3
in
in
13
16
7
Part No.
in
in
15
16
in
1 in
11116
in
118 in
1 Special
Length
214-1162
214-1163
214-1164
3P-2210 1
54 mm (2.13 in)
214-1165
214-1166
214-1167
214-1168
214-1169
214-1170
214-1171
214-1172
socket
in1
3
4
Size
Part No.
Length
1
2
214-6521
Size
Part No.
Length
214-6522
3
4
214-6553
214-6523
13
214-6524
7
8
214-6526
15
in
9
16
5
8
in
in
16
in
in1
16
11
1
2
in
3
4
in
in
1
2
Size
7
16
1
2
9
16
5
8
in
in
in
in
11
16
3
4
13
16
7
8
in
in
in
in
15
Length
213-3516
213-3517
213-3518
213-3520
213-3521
213-3522
213-3523
213-3524
213-3525
1 in
213-3526
1116 in
213-3528
118 in
213-3530
114 in
1U-8701
16
in
Part No.
in
16
in
in
16
in
214-6554
214-6556
214-6557
1 in
214-6558
11116 in
214-6559
118 in
214-6560
1316 in
214-6561
114 in
214-6562
1516 in
214-6564
138 in
214-6565
1716
214-6566
112 in
8T-5182
1916 in
214-6567
158 in
214-6568
11116 in
214-6607
134 in
214-6569
11316 in
214-6570
178 in
214-6571
2 in
214-6572
01a.qxp
10/5/06
1:23 PM
Page 19
Individual Sockets
3
4
3
4
Size
Part No.
Length
Size
Part No.
Length
Size
Part No.
Length
1 in
214-6599
112 in
1U-5715
3
4
124-0662
127 mm (5 in)
1116 in
214-6600
112 in
5P-3054
118 in
227-4397 1
1916 in
214-6608
118 in
214-6601
158 in
214-6609
1316 in
5P-3053 2
11116 in
6V-7874
1316 in
214-6602
134 in
214-6611
114 in
214-6603
11316 in
214-6612
1516 in
214-6604
178 in
214-6613
138 in
214-6605
2 in
214-6614
1716 in
214-6606
1 Special
2 Budd
in
wheel socket
Part No.
Length
112 in
6V-0024
Part No.
Length
Size
Part No.
Length
112 in
4C-6994
1316 in
4C-9787
2316 in
4C-9748
Part No.
Length
27
32
6V-4175
in4
in
9S-6375
in1
5P-1745
29
32
in3
6V-2002
15
16
in4
9S-6374
15
16
in3
9S-6370
1332 in3
5P-3579
118 in3
9S-6373
118 in4
9S-6369
1932 in3
5P-3580
1516 in3
9S-6372
11532 in3
5P-3581
1716 in
4C-6723
112 in3
9S-6371
11116 in
2P-2334
134 in
2P-2335
178 in
2P-2336
2316 in
2P-2338
214 in2
5P-1748
238 in1
5S-6077
212 in1
5S-6078
258 in1
5S-6079
234 in1
5S-6080
278 in
2P-8262
3 in1
5S-6081
318 in1
5S-6082
314 in1
5S-6083
312 in1
5S-6084
358 in1
5S-6085
334 in1
5S-6086
4 in1
5S-6087
414 in
5P-1662
1 Chrome
2 Impact
3 Track
4 Thin
finish
Part No.
Length
112 in
168-7955
Part No.
Length
3
4
9U-6548
in
13
16
7
8
in
in
15
16
in
1 in
1116
in
9U-6549
9U-6550
9U-6551
9U-6552
9U-6553
118 in
9U-6554
1316 in
9U-6555
114 in
9U-6556
1516 in
9U-6557
138 in
9U-6558
1716 in
9U-6559
112
Part No.
Length
112 in
9U-6734 1
158 in
1U-8798
11116 in
1U-8586
11316 in
261-8571
2 in
8T-9175
in
9U-6560
112 in
258-5686
2116 in
8T-9174
1916 in
9U-6561 1
2916 in
132-8743
158 in
9U-6562
234 in
136-5190
11116 in
9U-6563
314 in
231-4550 2
134 in
9U-6564
234-6041 3
113
16
in
9U-6565
414 in
1 Special
178 in
9U-6566
2 Special
11516 in
9U-6567
3 Special
2 in
9U-6568
2116 in
9U-6569
218 in
9U-6570
2316 in
9U-6571
214 in
9U-6572
2516 in
9U-6573
238 in
9U-6574
2716 in
9U-6575
212 in
9U-6576
2916 in
9U-6577
258 in
9U-6578
21116 in
9U-6579
234 in
9U-6580
21316 in
9U-6581
278 in
9U-6582
21516 in
9U-6583
3 in
9U-6584
1 Used
Hand Tools
01a.qxp
10/5/06
1:23 PM
Page 20
Hand Tools
ID: A24406T1
Sealed heads protect internal components from outside environment which leads to longer product life and reduced maintenance, and prevents gear slippage
Heads forged to exact tolerances for longer tool life and greater head strength
High strength internal mechanism provides longer tool life
Ergonomic handle reduces user fatigue and has a more comfortable grip
Reverse lever can be shifted with one hand which saves time when the gear mechanism needs to be reversed in tight places
Square drive is close to the end of the head, giving maximum accessibility to fasteners in restricted areas
Nickel chrome plating provides a durable, corrosion resistant coating and a brilliant tool finish
Drive
Size Part No.
Length
Smallest
Working Arc
Repair Kit
239-6823
12
230-0812
239-6824
12
230-0813
239-6825
10
214-7339
4
8
2
Ratchets
Warranty: Lifetime
Sealed heads protect internal components from outside environment which leads to longer product life
and reduced maintenance, and prevents gear slippage
Heads forged to exact tolerances for longer tool life and greater head strength
High strength internal mechanism provides longer tool life
Ergonomic handle reduces user fatigue and has a more comfortable grip
Reverse lever can be shifted with one hand which saves time when the gear mechanism needs to be reversed in tight places
Square drive is close to the end of the head, giving maximum accessibility to fasteners in restricted areas
Nickel chrome plating provides a durable, corrosion resistant coating and a brilliant tool finish
Repair Kits for Discontinued Ratchets
Size
Part No.
Length
Smallest
Working
Arc
in
239-6823
12
in
239-6824
12
230-0813
8H-8572
4S-7325
in
194-4944 3
8H-8557
4S-7326
in
239-6825
10
214-7339
9U-6635
in
214-7340 1
4.5
214-7341
9U-6637
in
239-6826
10
214-7339
9U-6639
in
263-3341 2
10
214-7339
214-7333
214-7339
1 Round
2 Long
Repair
Kit
230-0812
Part No.
Repair Kit
5P-7443
ID: D00994T1
head
flex handle
2 Offset
Breaker Bars
Warranty: Lifetime
ID: C79473T1
Drive
Size
Part No.
Length
Repair Kit1
1/
4
in
214-7316
3
8
in
214-7326
6V-0112
1
2
in
168-0383
1 Includes
01a.qxp
10/5/06
1:23 PM
Page 21
Ratchets / Miscellaneous
Hand Tools
Ratchet Heads
Warranty: Lifetime
Can be used as handle (10 inch long) for any 38 inch drive socket
When used with 5P-0328 Crowfoot Wrench, provides means to hold fuel
nozzle in place while installing fuel lines
ID: C80285T1
Head
Width
Head
Length
Head
Depth
Smallest
Working
Arc
Repair
Kit
Size
Part No
3
4
160-6389
63.0 mm
(2.48 in)
150.9 mm
(5.94 in)
31.2 mm
(1.23 in)
11.25
160-6390
161-3983
79.4 mm
(3.12 in)
200.0 mm
(7.86 in)
38.1 mm
(1.51 in)
12
161-3985
in
1 in
ID: B96379T1
Handles
Warranty: Lifetime
Warranty: Lifetime
Drive
Size
Part
No.
Length
Width
8H-8546
in
ID: C09453T1
Drive
Size
Part No.
Length
3
4
162-8716
5S-6089
in
1 in
ID: C80293T1
Socket Extensions
Warranty: Lifetime
Drive
Size
Part No.
Length
Drive
Size
Part No.
Length
in
9S-1720
in
271-4723 2
in
9S-1721
in
271-4724 2
in
8H-8574
in
8H-8548
in
3P-2240
in
8T-9265 1
in
8H-8575
in
8T-5183 1
2 in
5P-8676
1 in
5S-6076
9S-1732
1 in
158-8723 3
4
4
8
8
8
ID: C80281T1
2
2
4
4
4
in
in
8H-8559
1 Requires
in
271-4722 2
2 Impact
2
2
2
3 Double
locking pin
hole extension
01a.qxp
10/5/06
1:23 PM
Page 22
Hand Tools
Miscellaneous
Sliding T-Handle
Warranty: Lifetime
12 inch drive
12 point
Size
Part No.
Length
Drive
Size
Part No.
Length
6V-4058
in
214-7319
in
213-1985
in
4
2
ID: C58293T1
ID: C80277T1
Warranty: Lifetime
Warranty: Lifetime
ID: C80278T1
ID: C54475T1
Drive
Size
Part No.
Description
Use
1 in
5S-6090
Head
5S-6089 Handle
Drive
Size
Part No.
Length
8H-8573
in
ID: C07894T1
ID: C07906T1
Replacement
Bit
Part No.
Description
213-4437
in Female to
261-0446
Part No.
Description
9S-4028
9S-4026
9S-4027
261-0443
Adapter,
8H-8576
261-0444
8H-8561
261-0445
2P-8261
Universal Joint
5P-3588
Warranty: Lifetime
261-8569
261-8570
in Male
Item
ID: A82269T1
Drive Size
Part No.
1
4
in
9S-1724
3
8
in
6V-0094
1
2
in
8H-8560
01a.qxp
10/5/06
1:23 PM
Page 23
Warranty: Lifetime
34 inch female to 34 inch male
Used primarily with the 1P-0850 Torque Multiplier
Convenient for other applications such as with the 34
inch drive 9S-7351 Torque Wrench
5P-1749
Use with the 5S-6076 Extension, 5P-1748 Socket, and a suitable torque multiplier to loosen and
tighten the nuts which retain 8D and 9D Ripper mounting brackets
5P-3534
Capacity
450 lb
Use with a Torque Multiplier in applications such as tightening the nuts which secure the final
drive housings to the rear frame and case of Caterpillar articulated Motor Graders
Drive Size
Part No.
Torque
Capacity
Angular
Rotation
1 in
5P-1749
1,500 ft lb
30
5P-3534
1,000 ft lb
30
in
ID: 76005T1
ID: A07680T1
ID: C79422T1
Part No.
Outside
Diameter
O.A.L.
SIze
4C-9818
234 in
4C-9819
1316 in
212 in
1
1
16 in hex x 1 4 in on one end with 2 in
square drive (male) with lock button on other end
2
ID: C79436T1
Size
Part No.
Length
3
8
4C-9592
in
7
16
1
2
in
in
9
16
5
8
in
in
11
in
16
3
4
in
13
in
16
ID: C07911T2
7
8
in
15
in
16
1 in
4C-9595
4C-9596
4C-9597
4C-9598
4C-9599
4C-9601
4C-9602
4C-9603
Size
Part No.
Length
1
4
4C-9604
in
5
16
4C-9593
4C-9594
3
8
7
16
1
2
11
in
in
9
16
5
8
in
in
in
in
16
3
4
in
in
4C-9605
4C-9606
4C-9607
4C-9608
1S-0254
4C-9609
4C-9611
1S-0253
ID: C07911T3
Hand Tools
Universal Drives
01a.qxp
10/5/06
1:23 PM
Page 24
Hand Tools
Wrench Sets
Combination Wrenches
Warranty: Lifetime
15 angle on open end and 15 offset on box end
Box end is 12 point except 8H-8502 which is 6 point
All are polished chrome finish except 9U-5130
LENGTH
ID: C07949T2
Size
Part No.
Length
Size
Part No.
Length
in
4C-9604
in
1S-0253
in
in
4C-9598
4
4
16
in
8H-8502 1
4C-9605
13
16
4C-9606
in
4C-9599
4C-9601
in
in
4C-9592
15
16
4C-9602
16 in
4C-9607
1 in
4C-9603
4C-9593
1116 in
8H-8516
4C-9608
118 in
8H-8517
8
8
7
7
16
in
in
in
in
in
4C-9594
114 in
8H-8518
16 in
1S-0254
1516 in
8H-8519
4C-9595
138 in
8H-8520
2
2
9
9
16
in
in
4C-9609
112 in
8H-8424
in
4C-9596
158 in
8H-8423
46 mm (11316 in)
9U-5130 2
8
8
11
16
in
4C-9611
11
16
in
4C-9597
1 Box
end is 6 point
2 Black
oxide finish
Size
Part No.
5
16
248-8811
248-8812
3
8
in
7
16
1
2
11
in
in
9
16
5
8
in
in
in
16
3
4
in
in
Length
248-8813
248-8814
248-8815
190 mm (7 12 in)
248-8816
210 mm (8 14 in)
248-8817
248-8818
ID: D01359T1
Part No.
Length
8H-8501
9.50 in
ID: C79498T1
in x 916 in
01a.qxp
10/5/06
1:23 PM
Page 25
Wrench Sets
Warranty: Lifetime
Size
Part No.
Length
3
8
1P-3501
in
7
16
1
2
9
16
5
8
11
15
ID: C07902T1
in
in
16
7
8
in
in
16
3
4
13
in
in
in
in
1P-3504
1P-3505
1P-3506
1P-3507
1P-3508
1P-3509
1P-3510
1 in
1P-3511
16
in
1P-3502
1P-3503
138 in
127-2277
1116 in
1P-3512
112 in
127-2278
118 in
1P-3513
158 in
127-2279
114 in
1P-3514
178 in
127-2280
Drive Size
Part No.
3
8
1P-3501
1P-3502
in
7
16
1
2
in
9
16
5
8
11
in
in
in
16
3
4
in
in
Length
1P-3503
1P-3504
1P-3505
1P-3506
1P-3507
Drive Size
Part No.
13
16
1P-3508
1P-3509
in
in
15
16
in
Length
1P-3510
1 in
1P-3511
1116 in
1P-3512
118 in
1P-3513
114 in
1P-3514
Hand Tools
01b.qxp
10/5/06
1:24 PM
Page 26
Hand Tools
Socket Sets
Size
Part No.
Length
4.0 mm
200-8415
5.0 mm
200-8417
5.5 mm
200-8418
6.0 mm
200-8419
7.0 mm
200-8420
8.0 mm
200-8421
9.0 mm
200-8422
10.0 mm
200-8423
11.0 mm
200-8424
12.0 mm
200-8426
13.0 mm
200-8427
14.0 mm
200-8428
15.0 mm
200-8429
Size
Part No.
Length
8.0 mm
194-3480
6 point
1 inch drive
4
Standard length sockets
Polished chrome finish
Includes socket bar and clips
ID: C80419T1
6 point
1 inch drive
4
Deep length sockets
Polished chrome finish
Includes socket bar and clips
Size
Part No.
Length
6.0 mm
194-3518
7.0 mm
194-3519
8.0 mm
194-3521
9.0 mm
194-3522
10.0 mm
194-3523
11.0 mm
194-3527
12.0 mm
194-3528
13.0 mm
194-3529
14.0 mm
194-3530
12 point
3 inch drive
8
Standard length sockets
Polished chrome finish
Includes socket bar and clips
ID: D00467T1
ID: C33220T1
9.0 mm
194-3483
10.0 mm
194-3488
11.0 mm
194-3490
12.0 mm
194-3492
13.0 mm
194-3494
14.0 mm
194-3495
15.0 mm
194-3496
16.0 mm
194-3497
17.0 mm
194-3498
18.0 mm
194-3499
19.0 mm
194-3500
Size
Part No.
Length
8.0 mm
199-9023
12 point
3 inch drive
8
Deep length sockets
Polished chrome finish
Includes socket bar and clips
ID: C80417T1
9.0 mm
199-9025
10.0 mm
199-9026
11.0 mm
199-9027
12.0 mm
199-9028
13.0 mm
199-9029
14.0 mm
199-9030
15.0 mm
199-9031
16.0 mm
199-9032
17.0 mm
199-9033
18.0 mm
199-9034
19.0 mm
199-9035
01b.qxp
10/5/06
1:24 PM
Page 27
Socket Sets
Size
Part No.
Length
8.0 mm
214-6621
9.0 mm
214-6623
10.0 mm
214-6624
11.0 mm
214-6625
12.0 mm
214-6626
13.0 mm
214-6627
14.0 mm
214-6628
15.0 mm
214-6629
16.0 mm
214-6630
17.0 mm
214-6631
18.0 mm
214-6632
19.0 mm
214-6633
6 point
3 inch drive
8
Standard length sockets
Chrome finish
Includes socket bar and clips
ID: C33223T1
Size
Part No.
Warranty: Lifetime
10 mm
241-0860
12 mm
241-0861
13 mm
241-0862
14 mm
241-0863
15 mm
241-0864
17 mm
241-0865
241-0866
in
Length
11 mm
241-0867
2 in
241-0868
16
241-0869
241-0870
in
16 mm
11
16
in
241-0871
19 mm
241-0872
6 point
3 inch drive
8
Deep length sockets
Polished chrome finish
Includes socket bar and clips
Size
Part No.
Length
10.0 mm
214-6635
11.0 mm
214-6636
12.0 mm
214-6637
13.0 mm
214-6638
14.0 mm
214-6639
15.0 mm
214-6640
17.0 mm
214-6641
19.0 mm
214-6642
ID: C33224T1
6 point
3 inch drive
8
Standard length sockets
Includes socket bar and clips
ID: D01732T1
Size
Part No.
Length
8.0 mm
271-4623
9.0 mm
271-4624
10.0 mm
271-4625
11.0 mm
271-4626
12.0 mm
271-4627
13.0 mm
271-4628
14.0 mm
271-4630
15.0 mm
271-4631
16.0 mm
271-4632
17.0 mm
271-4633
18.0 mm
271-4634
19.0 mm
271-4635
21.0 mm
271-4636
24.0 mm
271-4637
Hand Tools
01b.qxp
10/5/06
1:24 PM
Page 28
Hand Tools
Socket Sets
Size
Part No.
Length
8.0 mm
271-4655
10.0 mm
271-4656
11.0 mm
271-4657
12.0 mm
271-4658
13.0 mm
271-4659
14.0 mm
271-4660
15.0 mm
271-4661
16.0 mm
271-4662
17.0 mm
271-4663
18.0 mm
271-4664
19.0 mm
271-4665
20.0 mm
271-4666
21.0 mm
271-4667
22.0 mm
271-4668
Size
Part No.
Length
8.0 mm
271-4639
12 point
3 inch drive
8
Standard length sockets
Includes socket bar and clips
ID: D01726T1
6 point
3 inch drive
8
Deep length sockets
Includes socket bar and clips
ID: D01720T1
9.0 mm
271-4640
10.0 mm
271-4641
11.0 mm
271-4642
12.0 mm
271-4643
13.0 mm
271-4644
14.0 mm
271-4645
15.0 mm
271-4646
16.0 mm
271-4647
17.0 mm
271-4648
18.0 mm
271-4650
19.0 mm
271-4651
21.0 mm
271-4652
24.0 mm
271-4653
Size
Part No.
Length
8 mm
271-4684
9 mm
271-4685
10 mm
271-4686
11 mm
271-4687
12 mm
271-4688
13 mm
271-4689
14 mm
271-4690
15 mm
271-4691
16 mm
271-4692
17 mm
271-4693
18 mm
271-4694
19 mm
271-4695
21 mm
271-4696
24 mm
271-4697
12 point
3 inch drive
8
Deep length sockets
Includes socket bar and clips
ID: D01714T1
Size
Part No.
Length
10.0 mm
9U-6125
12.0 mm
9U-6126
13.0 mm
9U-6127
14.0 mm
9U-6128
15.0 mm
9U-6129
16.0 mm
9U-6130
17.0 mm
9U-6131
18.0 mm
9U-6132
19.0 mm
9U-6133
ID: C54508T1
01b.qxp
10/5/06
1:24 PM
Page 29
Socket Sets
Hand Tools
Reference
RENR5153 Service Manual
Size
15 mm
Square drive
3
8
Maximum torque
42 Nm (375 in lbs)
inch
ID: D00357T1
Size
Part No.
Length
12.0 mm
199-6149
13.0 mm
199-6150
14.0 mm
8T-3041
15.0 mm
6V-9110
16.0 mm
6V-9111
17.0 mm
6V-9112
18.0 mm
6V-9113
19.0 mm
6V-9114
20.0 mm
199-6152
21.0 mm
6V-9115
22.0 mm
6V-9116
23.0 mm
199-6153
24.0 mm
199-6154
12 point
1 inch drive
2
Standard length sockets
Polished chrome finish
Includes socket bar and clips
ID: C80288T1
Size
Part No.
Length
16.0 mm
194-3505
17.0 mm
194-3506
18.0 mm
194-3510
19.0 mm
194-3511
20.0 mm
194-3512
21.0 mm
194-3513
22.0 mm
194-3514
24.0 mm
194-3515
25.0 mm
194-3516
26.0 mm
194-3517
12 point
1 inch drive
2
Deep length sockets
Polished chrome finish
Includes socket bar and clips
ID: C80289T1
Size
Part No.
Length
10.0 mm
213-6926
11.0 mm
213-6927
12.0 mm
213-6928
13.0 mm
213-6929
14.0 mm
213-6930
15.0 mm
213-6932
16.0 mm
213-6933
17.0 mm
213-6934
18.0 mm
213-6935
19.0 mm
213-6936
20.0 mm
213-6924
21.0 mm
213-6937
6 point
1 inch drive
2
Black oxide finish
Standard length impact sockets
Includes socket bar and clips
ID: C33225T1
01b.qxp
10/5/06
1:24 PM
Page 30
Hand Tools
Socket Sets
Size
Part No.
Length
10.0 mm
214-6644
11.0 mm
214-6645
12.0 mm
214-6646
13.0 mm
214-6647
14.0 mm
214-6648
15.0 mm
214-6649
16.0 mm
214-6650
17.0 mm
214-6651
18.0 mm
214-6652
19.0 mm
214-6653
20.0 mm
214-7346
6 point
1 inch drive
2
Black oxide finish
Deep length impact sockets
Includes socket bar and clips
ID: C80483T1
Part No.
Length
10.0 mm
261-8573
12.0 mm
261-8574
13.0 mm
261-8575
14.0 mm
261-8576
15.0 mm
261-8577
17.0 mm
261-8578
18.0 mm
261-8579
ID: D00708T1
6 point
1 inch square drive
2
Black oxide finish
Standard length impact sockets
Includes socket bar and clips
ID: D01119T1
Size
Part No.
Length
10.0 mm
246-8185
11.0 mm
246-8186
12.0 mm
246-8187
13.0 mm
246-8188
14.0 mm
246-8189
15.0 mm
246-8190
16.0 mm
246-8191
17.0 mm
246-8192
18.0 mm
246-8194
19.0 mm
246-8197
Size
Part No.
Length
27.0 mm
9U-6531
28.0 mm
9U-6532
30.0 mm
9U-6533
31.0 mm
9U-6534
32.0 mm
9U-6535
33.0 mm
9U-6536
34.0 mm
9U-6537
35.0 mm
9U-6538
36.0 mm
9U-6539
38.0 mm
9U-6540
40.0 mm
9U-6541
41.0 mm
9U-6542
42.0 mm
9U-6543
43.0 mm
9U-6544
46.0 mm
9U-6545
50.0 mm
9U-6546
6 point
3 inch drive
4
Black oxide finish
Standard length impact sockets
Size
Part No.
Length
17.0 mm
9U-6523
19.0 mm
9U-6524
20.0 mm
9U-6525
21.0 mm
9U-6526
22.0 mm
9U-6527
23.0 mm
9U-6528
24.0 mm
9U-6529
26.0 mm
9U-6530
ID: C79418T1
01b.qxp
10/5/06
1:24 PM
Page 31
Socket Sets
ID: C33228T1
Hex
Size
Drive
Size
Part No.
Bit
Length
Overall
Length
4.0 mm
in
194-3541
25.4 mm
5.0 mm
in
194-3542
25.7 mm
6.0 mm
in
194-3543
25.7 mm
7.0 mm
in
194-3544
25.7 mm
8.0 mm
in
194-3545
25.1 mm
10.0 mm
in
194-3546
25.5 mm
12.0 mm
in
194-3547
14.0 mm
in
194-3548
17.0 mm
in
194-3549
Drive
Size
Part No.
Bit Ext.
Length
Overall
Length
Replacement
Bit
6.0 mm
in
194-3543
25.7 mm
10.0 mm
in
6V-9085
23.9 mm
14.0 mm
in
6V-9086
35.0 mm
17.0 mm
in
1U-6151
47.0 mm
1U-6152
17.0 mm
in
168-8395
50.8 mm
169-0782
19.0 mm
in
9U-7418
47.7 mm
1U-7419
22.0 mm
1 in
1U-9474
32.0 mm
1U-9476
8
2
2
4
4
4
24.0 mm
27.0 mm
1 Hex
1 in
140-8780 1
50.8 mm
129-4552
72.0 mm
129-4553
bit only
Hex
Size
Drive
Size
Part No.
Bit
Length
Overall
Length
3 mm
in
243-5190
4 mm
in
243-5184
5 mm
in
243-5185
6 mm
in
243-5186
7 mm
in
243-5187
25.6 mm
8 mm
in
243-5188
25.6 mm
9 mm
in
243-5189
25.6 mm
10 mm
in
243-5183
25.6 mm
4
4
4
4
8
8
8
8
ID: D01137T1
Drive
Size
Part No.
Bit Ext.
Length
Overall
Length
4.0 mm
in
4C-8996
101.3 mm
10.0 mm
in
155-3046
101.3 mm
Hand Tools
01b.qxp
10/5/06
1:24 PM
Page 32
Hand Tools
Individual Sockets
1
4
Part No.
Length
Size
Part No.
Length
8.0 mm
194-3480
10.0 mm
9U-6125
9.0 mm
194-3483
12.0 mm
9U-6126
10.0 mm
194-3488
13.0 mm
9U-6127
11.0 mm
194-3490
14.0 mm
9U-6128
12.0 mm
194-3492
15.0 mm
9U-6129
13.0 mm
194-3494
16.0 mm
9U-6130
14.0 mm
194-3495
17.0 mm
9U-6131
15.0 mm
194-3496
18.0 mm
9U-6132
16.0 mm
194-3497
19.0 mm
9U-6133
17.0 mm
194-3498
18.0 mm
194-3499
19.0 mm
194-3500
Size
Part No.
Length
8.0 mm
271-4623
ID: C33413T1
Size
3
8
8.0 mm
271-4655
Size
Part No.
Length
9.0 mm
271-4624
8.0 mm
199-9023
10.0 mm
271-4625
Size
Part No.
Length
9.0 mm
199-9025
10.0 mm
271-4656
4.0 mm
200-8415
10.0 mm
199-9026
11.0 mm
271-4626
5.0 mm
200-8417
11.0 mm
199-9027
11.0 mm
271-4657
199-9028
12.0 mm
271-4627
5.5 mm
200-8418
12.0 mm
6.0 mm
200-8419
13.0 mm
199-9029
12.0 mm
271-4658
7.0 mm
200-8420
14.0 mm
199-9030
13.0 mm
271-4628
15.0 mm
199-9031
13.0 mm
271-4659
16.0 mm
199-9032
14.0 mm
271-4630
17.0 mm
199-9033
14.0 mm
271-4660
18.0 mm
199-9034
15.0 mm
271-4631
19.0 mm
199-9035
15.0 mm
271-4661
16.0 mm
271-4632
16.0 mm
271-4662
8.0 mm
200-8421
9.0 mm
200-8422
10.0 mm
200-8423
11.0 mm
200-8424
12.0 mm
200-8426
13.0 mm
200-8427
14.0 mm
200-8428
15.0 mm
1
4
200-8429
Size
Part No.
Length
6.0 mm
194-3518
7.0 mm
194-3519
8.0 mm
194-3521
9.0 mm
194-3522
10.0 mm
194-3523
11.0 mm
194-3527
12.0 mm
194-3528
13.0 mm
194-3529
14.0 mm
194-3530
3
8
Size
Part No.
Length
17.0 mm
271-4633
8.0 mm
214-6621
17.0 mm
271-4663
9.0 mm
214-6623
18.0 mm
271-4634
10.0 mm
214-6624
18.0 mm
271-4664
11.0 mm
214-6625
19.0 mm
271-4635
12.0 mm
214-6626
19.0 mm
271-4665
13.0 mm
214-6627
20.0 mm
271-4666
14.0 mm
214-6628
21.0 mm
271-4636
15.0 mm
214-6629
21.0 mm
271-4667
16.0 mm
214-6630
22.0 mm
271-4668
17.0 mm
214-6631
24.0 mm
271-4637
18.0 mm
214-6632
19.0 mm
214-6633
Size
Part No.
Length
10.0 mm
214-6635
11.0 mm
214-6636
12.0 mm
214-6637
13.0 mm
214-6638
14.0 mm
214-6639
15.0 mm
214-6640
17.0 mm
214-6641
19.0 mm
214-6642
3
8
Size
Part No.
Length
8 mm
271-4684
9 mm
271-4685
10 mm
271-4686
11 mm
271-4687
12 mm
271-4688
13 mm
271-4689
14 mm
271-4690
15 mm
271-4691
16 mm
271-4692
17 mm
271-4693
18 mm
271-4694
19 mm
271-4695
21 mm
271-4696
24 mm
271-4697
01b.qxp
10/5/06
1:24 PM
Page 33
Individual Sockets
Hand Tools
Size
Part No.
Length
Size
Part No.
Length
8.0 mm
271-4639
15.0 mm
271-4646
9.0 mm
271-4640
16.0 mm
271-4647
10.0 mm
271-4641
17.0 mm
271-4648
11.0 mm
271-4642
18.0 mm
271-4650
12.0 mm
271-4643
19.0 mm
271-4651
13.0 mm
271-4644
21.0 mm
271-4652
14.0 mm
271-4645
24.0 mm
271-4653
1
2
Size
Part No.
Length
Size
Part No.
Length
36.0 mm
242-0779
16.0 mm
194-3505
Size
Part No.
Length
214-6644
Size
Part No.
12.0 mm
13.0 mm
199-6149
199-6150
Length
38.1 mm (1.50 in)
17.0 mm
194-3506
10.0 mm
18.0 mm
194-3510
11.0 mm
214-6645
19.0 mm
194-3511
12.0 mm
214-6646
13.0 mm
214-6647
214-6648
20.0 mm
21.0 mm
194-3513
14.0 mm
194-3514
15.0 mm
214-6649
194-3515
16.0 mm
214-6650
17.0 mm
214-6651
18.0 mm
214-6652
19.0 mm
214-6653
20.0 mm
214-7346
14.0 mm
8T-3041
22.0 mm
15.0 mm
6V-9110
24.0 mm
16.0 mm
17.0 mm
6V-9111
6V-9112
194-3512
25.0 mm
26.0 mm
194-3516
194-3517
18.0 mm
6V-9113
19.0 mm
6V-9114
20.0 mm
199-6152
21.0 mm
6V-9115
Size
Part No.
Length
213-6926
213-6927
Size
Part No.
Length
1U-7936
1
2
22.0 mm
6V-9116
10.0 mm
23.0 mm
199-6153
11.0 mm
24.0 mm
199-6154
12.0 mm
213-6928
8.0 mm
25.0 mm
194-3558
13.0 mm
213-6929
9.0 mm
1U-7937
213-6930
10.0 mm
1U-7938
213-6932
11.0 mm
1U-7939
1U-7941
26.0 mm
194-3559
14.0 mm
27.0 mm
194-3562
15.0 mm
28.0 mm
194-3563
16.0 mm
213-6933
12.0 mm
17.0 mm
213-6934
13.0 mm
1U-7942
213-6935
14.0 mm
1U-7943
15.0 mm
1U-7944
214-6650
29.0 mm
194-3564
30.0 mm
194-3565
18.0 mm
31.0 mm
194-3566
19.0 mm
32.0 mm
194-3567
20.0 mm
213-6924
16.0 mm
21.0 mm
213-6937
17.0 mm
1U-7946
18.0 mm
214-6652
19.0 mm
1U-7948
Individual Sockets,
3
4
3
4
213-6936
inch Drive
3
4
Size
Part No.
Length
Size
Part No.
Length
Size
Part No.
Length
24.0 mm
6V-9117
17.0 mm
9U-6523
32.0 mm
9U-6535
30.0 mm
6V-9118
19.0 mm
9U-6524
33.0 mm
9U-6536
36.0 mm
6V-9119
20.0 mm
9U-6525
34.0 mm
9U-6537
46.0 mm
6V-9120
21.0 mm
9U-6526
35.0 mm
9U-6538
22.0 mm
9U-6527
36.0 mm
9U-6539
23.0 mm
9U-6528
38.0 mm
9U-6540
3
4
Size
Part No.
Length
24.0 mm
9U-6529
40.0 mm
9U-6541
20.0 mm
152-1058
26.0 mm
9U-6530
41.0 mm
9U-6542
27.0 mm
9U-6531
42.0 mm
9U-6543
28.0 mm
9U-6532
43.0 mm
9U-6544
3
4
Size
Part No.
Length
30.0 mm
9U-6533
46.0 mm
9U-6545
36.0 mm
175-6797
31.0 mm
9U-6534
50.0 mm
9U-6546
43.0 mm
6V-7874
01b.qxp
10/5/06
1:24 PM
Page 34
Hand Tools
Size
Part No.
Length
Size
Part No.
Length
Size
Part No.
Length
36.0 mm
9U-5089
19.0 mm
1U-7626
46 mm
207-8155
86 mm (3.51 in)
46.0 mm
207-8155
22.0 mm
1U-7627
55.0 mm
136-5189
46.0 mm
4C-6724
24.0 mm
1U-7628
65.0 mm
132-8743
27.0 mm
1U-7629
70.0 mm
136-5190
30.0 mm
1U-7630
32.0 mm
1U-7631
Part No.
Length
55.0 mm
4C-8217
1 Special
Part No.
Length
55 mm
159-2833
Used to remove and install tires and rims using M36 bolts with 55 mm hex head
Used with 4C-9813 Extension, 6V-6080 Torque Multiplier, 8T-5230 Air Regulated Wrench, and 4C-9814 Reaction Bar
Black industrial finish
High-strength, impact socket
Hex size
55 mm (2316 in), six point
Drive size
#5 spline
Overall length
Diameter
Stacking Sockets
Model: 777, 785, 789, 793, 797 Off-Highway Trucks
Part No.
Description
Size
203-5431
Stacking Socket
203-5432
Stacking Socket
203-5433
Stacking Socket
203-5434
Stacking Socket
203-5435
Stacking Socket
Typical
Stacking
Socket
ID: C80178T1
Drive Size
Part No.
Length
Description
Warranty: Lifetime
4.0 mm
200-8415
5.0 mm
200-8417
5.5 mm
200-8418
6.0 mm
200-8419
7.0 mm
200-8420
8.0 mm
200-8421
9.0 mm
200-8422
10.0 mm
200-8423
11.0 mm
200-8424
12.0 mm
200-8426
13.0 mm
200-8427
14.0 mm
200-8428
15.0 mm
200-8429
1
4
in
9U-6635
Ratchet
1
4
in
9S-1720
Socket Extension
1
4
in
9S-1721
Socket Extension
1
4
in
9S-1724
Socket contacts the fastener on the flats rather than on the corners, preventing rounding
of the fastener and allowing for more torque to be applied
Concentric or uniform wall thickness eliminates weak spots while allowing for a thin
wall design for greater accessibility
Creates positive engagement with the drive tool for a tight/slop-free driving system. Detents are
located on all four inner walls ensuring positive engagement with the drive tool in any orientation.
Hex and drive ends of the socket are countersunk or funnel-shaped, making engagement with the
fastener or drive tool quicker and easier
Nickel chrome plating provides a durable, corrosion resistant coating and a brilliant tool finish
Universal Joint
01b.qxp
10/5/06
1:24 PM
Page 35
Warranty: Lifetime
Metric, 6.0 mm through 19.0 mm
Polished chrome finish
Includes storage pouch
ID: C79499T1
Size
Part No.
Length
6.0 mm
1U-5546
7.0 mm
1U-5547
8.0 mm
1U-5548
9.0 mm
1U-5549
10.0 mm
6V-9090
11.0 mm
6V-9091
12.0 mm
6V-9092
13.0 mm
6V-9093
14.0 mm
6V-9094
15.0 mm
6V-9095
16.0 mm
6V-9096
17.0 mm
6V-9097
18.0 mm
6V-9098
19.0 mm
6V-9099
Drive Size
Part No.
Length
10.0 mm
6V-9090
11.0 mm
6V-9091
12.0 mm
6V-9092
13.0 mm
6V-9093
14.0 mm
6V-9094
15.0 mm
6V-9095
16.0 mm
6V-9096
17.0 mm
6V-9097
18.0 mm
6V-9098
19.0 mm
6V-9099
Part No.
Length
Size
Part No.
Length
6.0 mm
1U-5546
20.0 mm
6V-9100
7.0 mm
1U-5547
21.0 mm
6V-9101
8.0 mm
1U-5548
22.0 mm
6V-9102
9.0 mm
1U-5549
23.0 mm
214-7214
10.0 mm
6V-9090
171.0 mm (6.73in)
24.0 mm
6V-9103
11.0 mm
6V-9091
25.0 mm
214-7215
12.0 mm
6V-9092
26.0 mm
214-7217
13.0 mm
6V-9093
27.0 mm
214-7218
14.0 mm
6V-9094
29.0 mm
214-7220
15.0 mm
6V-9095
30.0 mm
6V-9104
16.0 mm
6V-9096
32.0 mm
214-7222
17.0 mm
6V-9097
36.0 mm
214-7223
18.0 mm
6V-9098
46.0 mm
9U-5130
19.0 mm
6V-9099
Hand Tools
01b.qxp
10/5/06
1:24 PM
Page 36
Hand Tools
Individual Wrenches
Size
Part No.
Length
8.0 mm
248-8820
9.0 mm
248-8822
10.0 mm
248-8823
11.0 mm
248-8824
12.0 mm
248-8825
13.0 mm
248-8826
14.0 mm
248-8827
15.0 mm
248-8828
16.0 mm
248-8829
17.0 mm
248-8830
18.0 mm
248-8831
19.0 mm
248-8832
ID: D01353T1
As special application tools, used to remove and install front steering cylinder linkage knuckle
on Cat vehicles listed below
Forged steel, straight-handled, open end, with black oxide finish
ID: D00515T1
214-7329 Wrench
Telescoping Material Handlers RT50, RT60 and RTC60; 214B Hydraulic Excavator
4C-4065 Wrench
ID: D01123T1
Size
Application
9S-9149
16
inch
16 mm/18 mm
Fuel system
17 mm/19 mm
Fuel system
Fuel pump
8T-0833
5P-5195
5P-0167
Brake spring
5P-0144
Fuel line
16
inch
Fuel line
Hand Tools
ID: C79999T1
Ratchet Wrenches
Warranty: Lifetime
Available in hex sizes from 38 inch to 214 inch
Comes with either straight, integral handles or handles adapted for 12 inch or 34 inch
square drive
Wrenches equipped with 12 inch and 34 inch square drive handle. Can be used either
with torque wrenches, combined with 12 inch and 34 inch drive extensions, or used
with a breaker bar.
Ratchets in 45 increments (18 of a turn)
Forged steel jaws, heat treated high carbon steel handles, and stainless steel rivets
with a black corrosion-resistant finish
ID: C07366T1
ID: C07367T1
ID: C66804T1
Reference
SENR6058, 5130 Service Manual Module, Disassembly and Assembly;
SENR6108, 5230 Service Manual Module, Disassembly and Assembly;
SEHS9721 Special Instruction, Assembly Procedure for Hydraulic Excavator (5130 only)
Type of wrench
Torque specification
Thickness
Head diameter
Overall length
01b.qxp
10/5/06
1:24 PM
Page 38
Hand Tools
Wrenches
Part No.
Hex
Size
Torque Capacity
8T-3122
26 Nm (19 lb ft)
8T-3123
8T-3124
8T-3125
8T-3126
8T-3127
11
16
8T-3128
8T-3129
13
16
8T-3130
8T-3131
15
16
8T-3132
1 in
in
16
2
in
16
8
in
in
in
in
in
in
in
in
29 Nm (21 lb ft)
34 Nm (25 lb ft)
45 Nm (33 lb ft)
68 Nm (50 lb ft)
86 Nm (64 lb ft)
97 Nm (72 lb ft)
114 Nm (84 lb ft)
141 Nm (104 lb ft)
159 Nm (118 lb ft)
170 Nm (125 lb ft)
ID: C07368T1
Part No.
Hex
Size
Torque Capacity
8T-3133
1116 in
8T-3134
118 in
8T-3135
114 in
8T-3136
138 in
8T-3137
112 in
8T-3138
158 in
ID: C41282T1
ID: C07370T1
Part No.
Hex
Size
Torque Capacity
8T-3172
3
8
26 Nm (19 lb ft)
8T-3173
7
16
8T-3174
1
2
8T-3175
9
16
8T-3176
5
8
8T-3177
11
8T-3178
3
4
8T-3179
13
8T-3180
7
8
8T-3181
15
8T-3182
1 in
in
in
in
in
in
16
in
in
16
in
in
16
in
Part No.
Description
Hex Size
1U-5732
Wrench Assembly
134 in
1U-5733
Wrench Assembly
178 in
1U-5734
Wrench Assembly
2 in
1U-5735
Wrench Assembly
218 in
29 Nm (21 lb ft)
34 Nm (25 lb ft)
45 Nm (33 lb ft)
68 Nm (50 lb ft)
86 Nm (64 lb ft)
97 Nm (72 lb ft)
114 Nm (84 lb ft)
141 Nm (104 lb ft)
159 Nm (118 lb ft)
170 Nm (125 lb ft)
01b.qxp
10/5/06
1:24 PM
Page 39
Wrenches
Jaw
Range
Jaw
Thickness
Length
Weight
8F-2243
69.9-120.7 mm
(234 in-434 in)
28.6 mm
(118 in)
914.4 mm
(36 in)
10 kg
(22 lb)
8F-2239
34.9-73.0 mm
(138 in-278 in)
22.2 mm
(78 in)
609.6 mm
(24 in)
5 kg
(11 lb)
Part No.
ServiceParts
Component
8F-2243
Movable Jaw
8F-2245
8F-2241
Bolt
8F-2246
8F-2242
Nut
5B-3254
Handle
8F-2239
5B-3254
8F-2240
ID: B44848T1
Part No.
Description
5P-7320
Box Wrench
Size
38.1 mm (1.50 in)
9U-7376
Sledge Wrench
8T-3196
Wrench
5P-1661
Sledge Wrench
ID: C79481T1
Adjustable Wrenches
Part No.
Jaw Range
Length
214-7322
Finish
Black Oxide
214-7323
Black Oxide
214-7330
Black Oxide
214-7332
Black Oxide
ID: C07910T1
Used for holding cylinders and other irregularly shaped objectsworks for parts of most any size and shape
Special head design for turning wrench in either direction
Ratcheting action makes it possible to regrip without removal
Chain wrench capacity: 12 inch to 434 inch O.D
ID: C33394T1
Head length
114.3 mm (4 12 in)
Head length
53.97 mm (2 18 in)
Head thickness
34.92 mm (1 38 in)
Chain length
Weight
Rated capacity
ID: C58234T1
Hand Tools
01b.qxp
10/5/06
1:24 PM
Page 40
Hand Tools
Wrenches
Used to remove and install threaded crown, which is used to retain head on later hydraulic cylinders
General purpose tool that can be used in many applications
Item
Part No.
Description
3P-1536
Handle
1U-8792
1U-8791
Chain Wrench Assembly, Handle Length 482.6 mm (19.00 in) ID: 61239-1T1
Chain part of 1U-8792, 76.2 mm (3.00 in) O.D. Minimum and 171.5 mm (6.75 in) O.D. Maximum
3P-1537
ID: C80098T1
Item
Part No.
Description
6H-7378
Retaining Ring
1P-0551
Spring Pin
2P-8253
Strap
ID: C05388T1
Description
Required
177-0364
ID: C80005T1Roller
177-0365
Cutting Wheel
177-0367
Pin
Not shown
177-0366
Spacer
Drive
Square
Number of teeth
Tooth width
01b.qxp
10/5/06
1:24 PM
Page 41
Wrenches
Hand Tools
Item
Part No.
Description
1P-2856
Spanner Wrench
1P-2854
Spanner Wrench1
1P-2853
Spanner Wrench1
1P-2852
Spanner Wrench1
1P-2851
Spanner Wrench1
1 Part
Diameter Range
ID: C07901T1
ID: C58294T1
Size
Part No.
158 in
9B-1496
ID: C80494T1
178 in
0V-0455
Size
Part No.
Length
2932 in
8F-2239
3
8
in x 716 in
214-7314
234 in
9F-3869
1
2
in x 916 in
214-7315
312 in
1B-7412
5
8
in x 1116 in
214-7317
Part No.
Length
13
32
in and 1532 in
5P-7254
14
32
in and 1932 in
5P-7255
25
32
in and 2932 in
5P-7256
9S-1743
in and 1 in
ID: C79426T1
Hex Wrenches
SMCS Code: 3200-000, 0721, 3203
Model: All skid steer loaders
Essential Tool
159-3327
242-6163
ID: C80530T1
01b.qxp
10/5/06
1:24 PM
Page 42
Hand Tools
Wrenches
ID: C79427T1
ID: C33507T1
ID: D01603T1
ID: C80415T1
Sizes: 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm, 4.0 mm,
5.0 mm, 6.0 mm, 8.0 mm, and 10.0 mm
CAT branded plastic holder included
Sizes: 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm, 4.0 mm,
5.0 mm, 6.0 mm, 8.0 mm, and 10.0 mm
CAT branded plastic holder included
ID: C80407T1
ID: D01609T1
01b.qxp
10/5/06
1:24 PM
Page 43
Wrenches
Hand Tools
ID: D01143T1
Part No.
Size
Part No.
Size
1U-7559
1.5 mm
1U-7573
5
64
in
1U-7560
2 mm
1U-7574
3
32
in
1U-7561
2.5 mm
1U-7575
1
8
1U-7562
3 mm
1U-7576
5
32
in
1U-7563
4 mm
1U-7577
3
16
in
1U-7564
5 mm
1U-7578
7
32
in
1U-7565
6 mm
1U-7579
1
4
1U-7566
8 mm
1U-7580
5
16
1U-7567
10 mm
1U-7581
3
8
1U-7568
12 mm
1U-7582
7
16
1U-7569
14 mm
1U-7583
1
2
1U-7570
17 mm
1U-7584
9
16
1U-7571
19 mm
1U-7585
5
8
in
4C-4067
22 mm
1U-7632
3
4
in
1U-7572
1
16
1U-7586
1 in
in
in
in
in
in
in
in
in
Item
Part No.
Description
Size
1P-3566
9U-7419
Bit
Bit
6V-0115
6V-2104
5P-4205
5P-4206
Wrench
Wrench
Wrench
Wrench
in
in
16
in
in
5 in
32
9 in
64
8
32
ID: C33395T1
Hex Size
Usable Depth
Part No.
3
4
inch Drive
Hex Size
Usable Depth
4C-6172 1
1.13 in
3.00 in
2B-1731
3.63 in
3B-7012
2.00 in
4.50 in
1U-6690
4.00 in
6.30 in
5P-7367 2
4.29 in
1.50 in
inch Drive
4.50 in
3B-6352
2.63 in
4.50 in
125-5723
4.50 in
5.75 in
1B-4657
2.75 in
4.50 in
1U-6691
5.50 in
7.90 in
7M-7809
2.88 in
7.25 in
1U-6692
5.75 in
7.90 in
5P-0954
3.00 in
4.50 in
Bar Turn
2B-1730
3.39 in
4.50 in
9F-9963
1.459 in
8.38 in
5P-3540
3.50 in
4.50 in
1 Special
1U-6689
3.50 in
6.30 in
2 Octagon
ID: 75995-1T1
01b.qxp
10/5/06
1:24 PM
Page 44
Hand Tools
12 inch drive
ID: C38083T1
Part No.
Size
5P-6587
1
2
5P-6588
9
16
5P-6589
3
4
in Hex
in Hex
in Hex
ID: C09346T1
ID: C79435T1
ID: C80594T1
Part No.
Description
6V-7937
Standard
6V-7933
Standard
6V-7932
Standard
No. 1
6V-7936
Phillips
No. 2
6V-7934
Phillips
16
16
8
ID: C79642T1
01b.qxp
10/5/06
1:24 PM
Page 45
Screwdrivers / Hacksaws
Hand Tools
Tip Size
Part No.
Description
6V-7935
Standard
16
6V-7937
Standard
16
6V-7933
Standard
6V-7932
Standard
No. 1
6V-7936
Phillips
No. 2
6V-7934
Phillips
ID: C79461T1
Tip Size
Part No.
Length
1
8
in
6V-9124
Tip Size
Part No.
Length
1
4
in
6V-7938
No. 1
6V-7936
1
4
in
6V-7935
No. 2
6V-7934
6V-7937
No. 3
214-7342
3
16
in
5
16
in
6V-7933
3
8
in
6V-7932
1
2
in
277-8790
ID: C79428T1
Warranty: Lifetime
222.25 mm (834 in) long overall; 96.04 mm (32532 in) stainless steel shank
length
316 inch and 932 inch flat tips, #1 and #2 Phillips, and #2 Pozidriv store in
hollow handle
ID: C79424T1
ID: C79643T1
Hacksaws
Teeth
Material
1U-9234
12 in-18
Bi-Metal
Quantity
5
1U-9236
12 in-24
Bi-Metal
10
1U-9238
12 in-32
Bi-Metal
1U-9240
12 in-18
1U-9242
12 in-24
1U-9244
12 in-32
ID: C66962T1
Part No.
Description
Length
Use
194-3552
Hacksaw
208-6183
Hacksaw
01b.qxp
10/5/06
1:24 PM
Page 46
Hand Tools
Pry Bars
ID: C58237T1
Part No.
Description
1U-7587
Size
152.4 mm (6.00 in)
194-3553
5F-4764
194-3556
1U-7591
Pry Bar
1U-7592
Pry Bar
1U-7593
Pry Bar
4F-5166
Pry Bar
4C-5742
4C-5647
239-4255
239-4143
239-4255
239-4140
239-4141
239-4140
ID: D00608T1
Hammers
Item
Part No.
Size
Height
Length
Weight
298.5 mm
(11.75 in)
340 g
(12 oz)
1S-0257
118 in
1B-7810
1532 in
113.5 mm
(4.47 in)
406.4 mm
(16.00 in)
680 g
(112 lb)
8H-8577
114 in
128.6 mm
(5.06 in)
406.4 mm
(16.00 in)
900 g
(2 lb)
11116 in
117.5 mm
(4.63 in)
330.2 mm
(13.00 in)
900 g
(2 lb)
.4
Hammer Handles
ID: C07907T1
1S-0258
Part No.
Size
Material
263-3817
Hickory
263-3819
Hickory
263-3820
Hickory
Item
Part No.
Description
Face Diameter
Overall Length
Weight
223-1697
223-1694
223-1693
223-1698
245-9823
223-1695
Not shown
Hammer Handles
ID: D00222T1
Part No.
Size
Material
263-3821
Hickory
263-3822
Hickory
01b.qxp
10/5/06
1:24 PM
Page 47
Slide Sledge
One operator can safely and easily maneuver the Slide Sledge Heavy Equipment Repair
Tool into hard-to-reach places, simplifying repairs while reducing operator effort.
Slide Sledge is powered by sliding the steel drive bar back and forth, allowing the operator
to deliver a precise impactwhen and where its needed. This eliminates inaccurate
sledgehammer swings that can damage machinery.
ID: D01743T1
ID: D01731T1
Item
Part No.
Weight
Length
Description
Use
272-1208
9 lb
30 in
272-1212
13 lb
46 in
272-1215
14 lb
30 in
272-1218
21 lb
46 in
Hand Tools
01b.qxp
10/5/06
1:24 PM
Page 48
Hand Tools
Slide Sledge
ID: D01725T1
Accessories
Item
Part No.
Description
Use
272-1222
Slide Sledge separator adapter and 1116 in, 1516 in, and 118 forks
272-1223
Attach all Slide Sledge separator forks and most common forks available
272-1224
272-1225
272-1226
272-1227
272-1228
272-1230
272-1233
272-1237
272-1239
Pin Driver,
212
272-1240
10
272-1241
Ideal for chopping away hardened debris and shearing metal bolts, pins, and rivets up to 38 in, grade 8
11
272-1242
272-1244
272-1247
Use on pins as small as 34 inch up to 1 inch with minimum tooth spacing of 412 in
Use on pins as small as 12 inch up to 34 inch with minimum tooth spacing of 312 in
Use on pins as small as 38 inch up to 12 inch with minimum tooth spacing of 234 in
12
272-1243
272-1245
272-1246
Use on pins as small as 34 inch up to 1 inch with minimum tooth spacing of 412 in
Use on pins as small as 12 inch up to 34 inch with minimum tooth spacing of 312 in
Use on pins as small as 38 inch up to 12 inch with minimum tooth spacing of 234 in
13
272-1249
Race/Bearing/Seal Adapter
Adapter driver tip to install races, bearings and seals. Add drive plates to the end of the adapter in various
combinations. Fits plates with a common 916 center hole, up to 34 inch high (plates not included).
14
272-1250
Adapter driver tip to properly install bushings easily and quickly. Fits drivers with a common 34 center hole,
up to 78 inch high (drivers not included).
15
272-1251
Removes scarifier teeth on most motor graders. The fork design allows the technician to split the trenching arm
where the scarifier tooth is forced to fit.
16
272-1252
All-purpose impact tool designed to separate parts and straighten steel with maximum force
17
272-1253
Increases the Slide Sledge striking force by 5 lbs; works with any of the four tools by threading onto tool handle
in diameter
Recommended for pins and bolts greater than 12 inch up to 78 inch diameter
Not shown
272-1248
287-2075
287-2076
Ideal for tractor trailers, backhoes, motor graders, and other large equipment
Description
Size
273-3527
38 in long
273-3528
52 in long
53 x 14 in
Not shown
273-3529
ID: D01737T1
01b.qxp
10/5/06
1:24 PM
Page 49
Hand Tools
Part No.
Description
157-2264
157-2276
157-2268
157-2273
157-2278
157-2269
157-2266
ID: C79833T1
ID: C79644T1
232-5041
Ergonomically designed
Magnetic tip holds tape in place and makes long distance measuring much easier
Yellow and black plastic
ID: C33497T1
Part No.
Blade Width
Blade Length
in Feet
Blade Length
in Meters
Graduations
in English
Graduations
in Metric
Locking
Feature
5P-3277
10
1 in, 110 in
Yes
1U-9366
1 in, 116 in
Yes
1U-9367
25.4 mm (1 in)
26
1 in, 116 in
Yes
1U-9368
25.4 mm (1 in)
30
Yes
232-5041
25.4 mm (1 in)
26
Yes
ID: D00695T1
Tape Measures
Warranty: Manufacturers
ID: C70205T1
01b.qxp
10/5/06
1:24 PM
Page 50
Hand Tools
Steel Tape
Part No.
Blade
Width
Blade
Length
Feet
Blade
Length
Meters
Graduations
English
Graduations
Metric
1U-9369
3
8
50
15
1 ft 1 in, 116 in
in
ID: C79429T1
.010
.020
.030
.040
.050
1 2
.060
.070
.080
.090
2 2
.100
.110
.120
3 2
.130
.140
.150 IN.
ID: C79602T1
No.270
4MM
ID: C66613T1
ID: C68824T1
ID: C41211T1
Item
Part No.
Description
Pipe Capacity
Length
4C-6974
Aluminum Wrench
4C-6975
Aluminum Wrench
4C-6976
Aluminum Wrench
Not shown
4C-6973
Aluminum Wrench
01b.qxp
10/5/06
1:24 PM
Page 51
Hand Tools
Pipe Capacity
Length
Weight
4C-6962
4C-6963
4C-6964
4C-6965
4C-6972
ID: C41210T1
ID: C41209T1
Wheel for
Stainless Steel
Item
Part No.
O.D. Capacity
Length
Weight
4C-6977
4C-6980
4C-6981
4C-6978
4C-6980
4C-6981
4C-6979
4C-6982
Hardened cutting edges stay sharper longer and cut with less effort
Machined cutter heads for matched blades
Black oxide finish
Vinyl grip
Part No.
Description
Length
6V-6192
Combination Pliers
6V-6193
6V-6194
Part No.
Description
Length
Finish
Vinyl Grip
6V-6192
Combination Pliers
Black Oxide
Yes
213-1983
Combination Pliers
Chrome
Yes
1S-0255
Combination Pliers
163.5 mm (6.40in)
Chrome
No
214-7347
Chrome
Yes
6V-6195
Black Oxide
Yes
236-1169
Chrome
Yes
6V-6194
Black Oxide
Yes
6V-6193
Black Oxide
Yes
212-3607
Black Oxide
Yes
8H-8582
Chrome
No
214-7348
Chrome
No
246-5128
Black/Yellow
No
246-5129
Black/Yellow
No
246-5131
Black/Yellow
No
246-5132
Black Yellow
No
246-5133
Black Yellow
No
246-5134
236-1169
Chrome
Yes
Not shown
ID: D00505T1
01b.qxp
10/5/06
1:24 PM
Page 52
Hand Tools
Pliers / Punches
Item
Part No.
Tip Size
Type
0.12 in
External
0.09 in
Internal
0.07 in
Internal
0.04 in
External
0.07 in
External
0.04 in
Internal
ID: C05333T1
Item
Part No.
Tip Size
Type
0.12 in
External
0.09 in
Internal
0.07 in
Internal
0.04 in
External
0.07 in
External
0.04 in
Internal
ID: C07899T1
Item
Part No.
5P-5197
External Pliers
136-1452
Internal Pliers
1U-6728
Tip Set
1U-6728
Tip Set
Not shown
6V-2062
Tip Set, 90
(Used for 5P-5197)
ID: A54965-1T1
Description
Used to remove and install the large internal retaining rings in power shift
transmissions
Overall length: 29.00 in (737.0 mm)
Double ratchet lock
Pliers include 0.15 in (3.8 mm) diameter tips
Service Part: 1U-8759 Replacement
Tips (2 per package)
ID: C33478T1
ID: B83786T1
Point Size
Length
226-1901
1
16
in
226-1902
3
32
in
226-1903
1
8
226-1904
5
32
in
226-1905
3
16
in
226-1906
7
32
in
226-1907
1
4
in
in
Replaces discontinued
1U-7260 Drift Punch Set, 5 Piece
Material: high carbon steel
Individually heat treated
for uniform hardness
Includes pouch
Part No.
ID: D00417 T1
ID: D00416T1
Point Size
227-3130
227-3131
227-3132
227-3133
227-3134
in
16
32
4
in
in
in
16
Length
in
10/5/06
1:24 PM
Page 53
Part No.
Punch Size
227-3796
16
227-3797
227-3798
16
227-3799
inch
227-3800
inch
Hand Tools
Service Parts
inch
inch
inch
Length
114.3 mm (4.50 in)
127.0 mm (5.00 in)
139.7 mm (5.50 in)
ID: D00369T1
Item
Part No.
Punch
Size
Length
Type
8H-8578
in
Punch
1F-1161
in
Cold Chisel
1F-1159
16
in
Center Punch
8H-8579
32
in
1F-1160
13
32
1U-7296
16
8T-0832
165-3977
4.95 mm
Not shown
ID: D00527T1
Rivet Sets
Available for either Star set rivets or Roll set rivets
Star set rivets, identified by a star stamped in the head,
should be used only where the clinching is done against a
non-metallic surface. To form a good clinch, there should be
approximately 316 inch of rivet extension before the rivet is set.
Roll set rivets, marked with a circle on the head, should
be used when clinching is done against metal. To form
a good clinch, there should be approximately 18 inch
of rivet extension before the rivet is set.
in
in
in
203.2 mm (8 .00in)
Punch
Cold Chisel
Center Punch
Cape Chisel
Radius Punch
Item
Part No.
Description
1P-2874
6F-6947
Star Set
6F-6946
6V-7013
ID: C07888T1
Feeler Gauges
Item
Part No.
Description
1U-7234
8H-8581
Not shown
1B-9660
ID: C78585T1
.001
in
.0015
.002
.003
.001
in
.0015
.002
.003
.001
in
.0015
.002
.003
.001
in
.0015
.002
.003
.001
in
.0015
.002
.003
.001
in
.0015
in
.002
.003
.001
.0015
in
.002
.003
.001
.0015
in
CLEARANCE RANGE
.002
.003
.0015
.001
.002
.003
in
.0015
.001
.002
.003
in
.0015
.001
.002
.003
in
.0015
.001
.002
.003
.001
in
.0015
.002
.003
.001
in
.0015
.002
.003
.001
in
.0015
.002
.003
.001
in
.0015
.002
.003
.001
in
.0015
.002
.003
.001
in
.0015
.002
.003
CLE
ID: C80131T1
.003 INCH
in
Used to quickly and easily check clearance between mating parts (main rod and b
.001
earing clearance, component side clearance, oil pump cover to gear clearance, etc.)
.0015
Plastigage clearance indicator is an extruded plastic thread that crushes when
.002
.003
clamped between two mating parts
Available in four color-coded sizes for easy identification
in
.001
Clearance thickness is determined by holding
.0015
crushed indicator material against paper packaging (refer to illustration)
.002
Any plastic residue on parts can be quickly removed with component cleaner
.003
One indicator per package
Overall length: 30.0 cm (12.00 in)
Crushed material indicates a (.001 in) clearance
Part No.
Color
Clearance Range
198-9142
Green
198-9143
Red
198-9144
Blue
198-9145
Yellow
01b.qxp
ID: C80135T1
01b.qxp
10/5/06
1:24 PM
Page 54
Hand Tools
Miscellaneous
Retrieval Tools
Putty Knife/Scraper
Item
Part No.
Description
1U-7262
Telescoping Magnet
Part No.
Description
Size
146-2728
8H-8580
Scraper
Part No.
Description
4C-9946
5H-4845
5H-4846
Handle
ID: C79431T1
ID: C80225T1
Item
Part No.
Description
1S-2475
Wrench, 34 in square
8H-8559
213-1985
212-8145
212-8146
261-0444
185-3630
ID: C79485T1
5H-4847
End
5H-4848
Bit
ID: C79433T1
5P-1720
Used to remove and install all types of oil seals
One end of pick is pointed for prying out flexible seals
Blunt, hook end is used to align seals for installation and to eliminate the twist
that occurs when installing O-ring or quad-ring seals
Both ends of the pick are hardened and provide much greater strength than would
normally be expected from a tool this size
5P-7414
ID: C80219T1
152.4 mm (6 in)
Quantity
ID: C27161T1
ID: C79918T1
01b.qxp
10/5/06
1:24 PM
Page 55
Brushes
Hand Tools
Scratch Brushes
Hand scratch brushes are excellent for removing rust, scale, old paint, chips
and dirt, and for cleaning castings and metal parts
Provide long, effective service at extremely low cost
Part No.
Description
Size
1U-9915
.014 in (3 x 19 Row)
1U-9916
.012 in (4 x 19 Row)
1U-9917
.014 in (4 x 16 Row)
1U-9918
.006 in (3 x 7 Row)
ID: C33464T1
ID: C79258T1
ID: C79255T1
ID: C79259T1
01b.qxp
10/5/06
1:24 PM
Page 56
Hand Tools
Paint Brushes
Use with interior or exterior paints, stains, varnishes, and urethanes
Quantity: one box of 12 brushes
ID: C44013T1
Item
Part No.
Description
Wire
Size
Wire
Row
1U-9920
11 in O.A.L.
Size #10
Black Polypropylene
Part No.
Size (w x l)
Material
1U-9919
11 in O.A.L.
Size #10
Tampico
262-9749
25 mm x 178 mm (1 in x 7 in)
1U-9922
11 in O.A.L.
Size #10
Unitized
262-9750
51 mm x 203 mm (2 in x 8 in)
2B-4317
1034 in O.A.L.
Paint Style
112 in
Black Nylon
262-9752
76 mm x 203 mm (3 in x 8 in)
ID: D01215T1
Acid Brushes
Part No.
Description
Size
1U-9977
Acid Brush
in
1U-9978
Acid Brush
in
1U-9979
Acid Brush
16
in
ID: C79612T1
ID: C33487T1
Item
Part No.
Description
190-1668
Coupler
190-5623
Not shown
190-1669
Description
190-1670
2M-2689
9F-2689
Nozzle Assembly
9F-2638
9F-2637
Reference
NEHS0793 Tool Operating Manual
Item
Part No.
Description
190-1668
Coupler
190-1669
Not shown
190-5623
01b.qxp
10/5/06
1:24 PM
Page 57
Grease Guns
Hand Tools
Motor
12 Volt
Battery
Pressure capacity
Charge time
7
16
1
8
Lubricating capacity
(under normal conditions)
3 cartridges minimum
Battery capacity
Battery charger
110 Volt
Part No.
Description
Grease Gun
Battery charger
inch UNEF
inch NPT
Carrying case
194-3561
Rechargeable Battery
207-2736
ID: C79964T1
01c.qxp
10/5/06
1:25 PM
Page 58
Torque Wrenches
Hand Tools
Torque Wrenches
Click Type Torque Wrenches
Style A
Style B
ID: C80440T1
Style
Torque Range
Min.
Max.
40 ft-lb
ID: C80471T1
Drive
Size
Part
No.
Accuracy
Headstyle
Increments
Length
Head
Width
Head
Depth
252 ft-lb
in
8T-9293
6%
Flex-Ratchet
5 ft-lb
561.97 mm
(2218 in)
41.27 mm
(158 in)
19.05 mm
(34 in)
Yes
5P-7429 1
260-3765 2
200 ft-lb
600 ft-lb
in
162-8718
6%
Detach-Ratchet
10 ft-lb
1219.2 mm
(48 in)
60.32 mm
(238 in)
31.75 mm
(114 in)
160-6390 1
260-3766 2
20 ft-lb
100 ft-lb
in
4C-5492
6%
Flex-Ratchet
2 ft-lb
447.67 mm
(1758 in)
28.57 mm
(118 in)
14.28 mm
(916 in)
Yes
4C-5819 1
260-3764 2
6.8 Nm
(5 ft-lb)
101.8 Nm
(75 ft-lb)
in
9U-5019
6%
Fixed Ratchet
.7 Nm
(0.5 ft-lb)
393.7 mm
(15.5 in)
Yes
13.6 Nm
(10 ft-lb)
135.7 Nm
(100 ft-lb)
in
9U-5020
6%
Fixed Ratchet
.7 Nm
(0.5 ft-lb)
393.7 mm
(15.5 in)
Yes
27.1 Nm
(20 ft-lb)
203.6 Nm
(150 ft-lb)
in
214-7349
6%
Fixed Ratchet
1.4 Nm
(1 ft-lb)
469.9 mm
(18.5 in)
Yes
40.7 Nm
(30 ft-lb)
339.3 Nm
(250 ft-lb)
in
9U-5006
6%
Fixed Ratchet
1.4 Nm
(1 ft-lb)
539.6 mm
(21.25 in)
Yes
135.7 Nm
(100 ft-lb)
814.2 Nm
(600 ft-lb)
in
9U-5007
6%
Fixed Ratchet
7 Nm
(5 ft-lb)
1092.2 mm
(45 in)
Yes
1 Service
2 Service
Case
Service
Kit
214-7350
Drive
SIze
Part
No.
Accuracy
Increments
Metric
U.S.
800 Nm
600 ft-lb
3
4
in
9U-5014
4%
20 Nm
480 Nm
350 ft-lb
3
4
in
9U-5015
4%
240 Nm
175 ft-lb
1
2
in
9U-5016
35 Nm
300 in-lb
3
8
in
800 Nm
600 ft-lb
3
4
480 Nm
350 ft-lb
230 Nm
34 Nm
ID: A38085-1T1
Length
Needle
Follow-Up
Indicator
Light
Case
10 ft-lb
118.11 cm
(46.5 in)
Yes
Yes
10 Nm
10 ft-lb
70.61 cm
(27.8 in)
Yes
Yes
4%
5 Nm
5 ft-lb
54.61 cm
(21.5 in)
Yes
Yes
9U-5017
4%
1 Nm
5 in-lb
25.4 cm
(10.0 in)
Yes
Yes
in
9S-7351
2%
20 Nm
10 ft-lb
103.9 cm
(40.9 in)
Yes
3
4
in
9S-7352
2%
10 Nm
5 ft-lb
75.9 cm
(29.9 in)
Yes
175 ft-lb
1
2
in
9S-7353
2%
10 Nm
2.5 ft-lb
47.62 cm
(18.75 in)
Yes
300 in-lb
3
8
in
9S-7354
2%
1Nm
5 in-lb
25.2 cm
(9.9 in)
Yes
01c.qxp
10/5/06
1:25 PM
Page 59
Torque Wrenches
Extensions
Used for fasteners in inaccessible places, such as track roller guard bolts, where a torque wrench
and standard socket cannot be used
Has an effective length of 610 mm (24 in) and a capacity up to 884 Nm (650 ft-lb)
A slide rule type torque computer, Form SEHS7150, is available to determine the torque wrench
dial reading for different extensions
Part No.
Hex Size
Straight/
Config.
Offset
6V-4165
19 mm
12 pt
straight
650 ft/lbs
262-2758
20 mm
12 pt
straight
650 ft/lbs
Torque
4C-9563
24 mm
12 pt
straight
650 ft/lbs
262-2759
30 mm
12 pt
straight
650 ft/lbs
Part No.
Description
4C-9565
36 mm
12 pt
straight
650 ft/lbs
6V-3146
Tubular Extension
9U-7375
46 mm
12 pt
offset
1000 ft/lbs
6V-4170
Adapter, 34 inch,
Sq. Drive
9U-5612
55 mm
12 pt
offset
1000 ft/lbs
6V-4166
12 pt
straight
650 ft/lbs
6V-4167
15
16
in
12 pt
straight
650 ft/lbs
6V-4171
15
16
in
12 pt
15 offset
6V-4168
118 in
12 pt
straight
650 ft/lbs
6V-4169
1516 in
12 pt
straight
650 ft/lbs
6V-4154
112 in
12 pt
straight
650 ft/lbs
in
ID: B64023-1T1
Part No.
Description
Use
9S-6330
for 916 inch head universal joint bolts in earlier 992 Wheel Loaders.
8S-5131
for front left main bearing cap bolt on 1100 and 3100 Series Engines.
1P-2382
for universal joint bolts on all tractor-scrapers (except 613) and No. 16 Motor Graders.
5P-0166
for torquing fuel line nuts on D3 Tractors, 910 Wheel Loaders and 931 Track Loaders.
8F-4678
8F-4677
use to double capacity of 8F-4675 and 9S-7352 Torque Wrenchs for torque applications up to 700 ft.lb.
5P-4773
Not Shown
9U-5932
8T-3196
Offset Box Wrench (34 inch Drive, 178 inch Hex, 12 pt)
9U-6282
156-2568
Part No.
Description
3
4
Use
ID: B99650T1
6V-9452
Adapter,
6V-9451
Tubular Arm
inch Drive
6V-9453
Tighten retaining nut for lower vertical hitch pin on 613 Tractor-Scrapers.
6V-9454
Tighten mounting stud nuts on 55, 56, 57, 58 and 59 Towing Winches.
6V-9456
Tighten steering cylinder tie rod bolt nut on No. 16G Motor Graders.
6V-9455
Remove and install rear axle housing, pivot joint cap bolts on 789 and 793
Hand Tools
01c.qxp
10/5/06
1:25 PM
Page 60
Torque Wrenches
Hand Tools
Used to apply torque greater than capability of torque wrench with an accuracy of 5%
Specifically used to install and remove counterweight bolts on 5230B Front Shovels or other similar applications
Designed for use with 1 inch square drive torque wrench
Provides 360 continuous rotation in both directions
Built-in, angle-of-turn protractor measures angle of rotation in 5 increments for torque turn specifications
Overload protection is provided by square output drive which shears at a torque slightly above maximum
output rating
Decals located on multiplier provide torque input and output values
References
RENR3379 Service Manual, Disassembly and Assembly
1 inch
112 inch
Power ratio
4.33 to 1
Overall length
76 mm (30.0 in)
ID: D00374T1
Torque Multipliers
Warranty: Manufacturers
Part No.
Square
Input
Square
Output
Power
Ratio
Rated Input
Capacity
Maximum Rated
Output
Weight
6V-7820
6 to 1
271 Nm
(200 ft-lb)
1620 Nm
(1200 ft-lb)
4 kg
(9 lb)
240 Nm
(177 ft-lb)
4335 Nm
(3200 ft-lb)
8.2 kg
(18 lb)
in
in
Gear
6V-6136
Pinion
ID: B51998T1
6V-7820
Part No.
Description
2N-2213
Bearing
6V-4079
Drive Assembly
8H-0707
Bolt
6V-4081
Pinion
3B-3911 ID: B19963T1
Bearing
6V-4083
Gear
6V-6134
Protractor
6V-9137
Pinion
6V-9136
Gear
6V-6134
Protractor
176-2934
Drive Assembly
5P-4115
Washer
6V-6137
Dowl
6V-9135
Pin
6V-6139
Pin
6V-6762
Race
2M-1672
Bearing
2H-2213
Bearing
8T-0893
Screw
8T-5181
8T-0894
Hardware Kit
ID: C07589T1
01c.qxp
10/5/06
1:25 PM
Page 61
Torque Wrenches
Hand Tools
ID: C05337T1
Part No.
Torque Range
Metric
Drive U.S.
Size
9U-5009
12 to 57 Nm
10 to 50 in-lb
9U-5010
57 to 282 Nm
50 to 250 in-lb
9U-5011
226 to 1130 Nm
9U-5012
68 to 339 Nm
50 to 250 ft-lb
9U-5013
163 to 813 Nm
ID: C44099T1
NOTE: Use 9U-5101 mounting bracket to mount the testers to a bench top. No bracket is required to mount testers to a vertical surfaces.
Item
Part No.
Description
8T-5190
Wrench Group1
8T-5191
Bar
8T-5192
Bar
8T-5193
Regulator
8T-5194
Block (Spacer)
8T-5224
Gauge
8T-5225
Hose
8T-5226
Nipple (two)
8T-5227
Coupler (two)
10
8T-5228
Block (base)
11
6V-6105
Block (lid)
12
0T-0065
13
1A-5964
14
5M-2894
Washer (two)
Not shown
ID: C07365T1
1U-5809
Grommet
1U-5748
Output spindle
8T-5321
Seal Kit
1 When
01c.qxp
10/5/06
1:25 PM
Page 62
Torque Wrenches
Hand Tools
Pneumatic Wrenches
Model
Requirement
Tool
Description
Tool
Part No.
785 and
789
Remove and
Install Rim Nuts
Socket
(1.50 Hex)
8T-5182
785 and
789
Standard Rim
Extension
(16 inch long)
8T-5183
785 and
789
Rim Pilot
Stud Nuts
Deep Socket
(1.50 Hex)
1U-5715
789
Large Optional
Rims
Extension
(10 inch long)
8T-9265
994
Standard Rims
Extension
4C-9813
(17.7 inch long) (spline drive)
994
Standard Rims
Socket
(46 mm)
4C-9812
Square drive
1 inch
20 cfm
Minimum pressure
Service Parts
Part No.
Description
194-7589
195-7592
Reaction Arm
194-7607
195-3500
Wrench Assembly
194-7591
Regulator Group
194-7609
Hose Assembly
194-7610
Cage Assembly
194-7611
Filter Assembly
194-7612
Gauge Pressure
1 262-6728
ID: C79949T1
Repair Information
Torque range
Square drive
1 inch
32 cfm
Maxpro Corporation
208 Fairhill St.
Willow Grove PA 19090
Minimum pressure
Part No.
Description
194-7590
Service Parts
194-7605
195-3501
Wrench Assembly
194-7591
Regulator Group
194-7609
Hose Assembly
194-7610
Cage Assembly
194-7611
Filter Assembly
194-7612
Gauge Pressure
1 262-6726
Reaction Arm
194-7608
01c.qxp
10/5/06
1:25 PM
Page 63
Torque Wrenches
Hydraulic Wrenches
Hand Tools
Part No.
1U-6221
1844.2 Nm
(1360 ft lbs)
4136 Nm
(3050 ft lbs)
8475.4 Nm
(6250 ft lbs)
203.4 Nm
(150 ft lbs)
474.6 Nm
(350 ft lbs)
881.4 Nm
(650 ft lbs)
Accuracy
132-8183
36 mm
46 mm
55 mm
36 mm
46 mm
55 mm
55 mm
65 mm
70 mm
Part no.
132-8143
1U-6222
132-8144
132-8176
132-8177
132-8178
132-8190
132-8191
132-8192
19 - 65 mm
(34 - 2916 in)
25 - 80 mm
(1 - 318 in)
46 - 95 mm
(112 - 378 in)
132-8142
132-8166
132-8189
Square Drive
132-8167 (1 in)
Reaction Arm2
n/a
132-8160
132-8184
Additional link sizes are available. Call the Hotline to check the availability of additional links.
Hotline USA: 1-800-542-8665, Illinois: 1-800-541-8665, Canada: 1-800-523-8665,
Geneva phone: ++41 (22) 849 40 48/4428
Part No.
242-1414
242-1415
Maximum torque
242-1413
Minimum torque
Accuracy
ID: D01273T1
46 mm
36 mm
46 mm
36 mm
46 mm
Part no.
242-1420
242-1422
242-1423
242-1424
242-1425
242-1419
19 - 55.6 mm
(34 - 2316 in)
46 - 80 mm
(11316 - 318 in)
60.3 - 95 mm
(238 - 378 in)
246-0441
246-0442
246-0443
Note: When ordering a power head low clearance tool, a link must also be purchased
to use the power head.
1
Additional link sizes are available. Call the Hotline to check the availability of additional links.
Hotline USA: 1-800-542-8665, Illinois: 1-800-541-8665, Canada: 1-800-523-8665 ,
Geneva phone: ++41 (22) 849 40 48/4428
01c.qxp
10/5/06
1:25 PM
Page 64
Torque Wrenches
Hand Tools
Hydraulic Wrenches
Part No.
132-8112
132-8119
132-8126
132-8133
Maximum torque
1884.9 Nm
(1390 ft lbs)
4447.9 Nm
(3280 ft lbs)
7580.4 Nm
(5590 ft lbs)
15621.8 Nm
(11520 ft lbs)
Minimum torque
271.2 Nm
(200 ft lbs)
650.9 Nm
(480 ft lbs)
1132.3 Nm
(835 ft lbs)
2379.9 Nm
(1755 ft lbs)
Drive size
1 in
112 in
112 in
Accuracy
Reaction Arm
Standard
Standard
Standard
Standard
Weight
2.02 kg
(4.45 lbs)
4.51 kg
(9.95 lbs)
7.60 kg
(16.75 lbs)
13.38 kg
(29.50 lbs)
Seal Kit
1U-6225
132-8125
132-8132
132-8139
in
ID: D01249T1
Part No.
242-1410
242-1411
242-1412
Maximum torque
813.6 Nm
(600 ft lbs)
1559.45 Nm
(1150 ft lbs)
4088.5 Nm
(3015 ft lbs)
Minimum torque
94.9 Nm
(70 ft lbs)
237.3 Nm
(175 ft lbs)
617 Nm
(455 ft lbs)
Drive size
Accuracy
in
in
1 in
3
242-1416
242-1417
242-1418
Weight
1.4 kg
(3.15 lbs)
2 kg
(4.45 lbs)
4.5 kg
(9.90 lbs)
Repair Kit
246-0438
246-0439
246-0440
1 Tool
ID: SQV.jpg
Part No.
242-1408
242-1409
Maximum torque
Minimum torque
Drive size
1 in
Accuracy
Weight
6 kg (13.15 lbs)
Repair Kit
246-0436
246-0437
in
Part No.
175-7940
Simple to use
Unibody housing
Maximum torque
Minimum torque
Drive size
112 in
112 in
Accuracy
Weight
ID: C80038T1
175-7941
01c.qxp
10/5/06
1:25 PM
Page 65
Torque Wrenches
Hand Tools
Hydraulic Pumps
Warranty: Manufacturers
Includes hydraulic gauge
Includes high-quality hose, 69,950 kPa (10,000 PSI)
ID: D01261T1
Part No.
Voltage
Single /
Dual Port
Weight
175-7944
115 VAC
50/60 Hz
Single phase
Single
175-9412
230 VAC
50/60 Hz
Single phase
Single
132-8223
115 VAC
50/60 Hz
Single phase
Dual
132-8231
230 VAC
50/60 Hz
Single phase
Dual
245-9965
115 VAC
50/60 Hz
Single phase
Dual
242-1435
230 VAC
50/60 Hz
Single phase
Dual
230 VAC
50/60 Hz
Single phase
Dual
n/a
Single
Electrical
Air
132-8232
(not shown)
Manual
175-7945
Part No.
Description
5P-2700
1H-8134
Ring
5P-2688
Spring
5P-2693
Gasket
5P-2692
Head
5P-2694
Spring
5P-2697
Handle Assembly
1A-2209
Bolt
5P-2701
5P-2690
Ratchet
01c.qxp
10/5/06
1:25 PM
Page 66
Pneumatic Tools
Hand Tools
Impact Wrenches
Pneumatic Tools
Impact Wrenches, 38 inch
Warranty: Manufacturers
Part No.
222-3048
Drive size
8000 RPM
in
9000 RPM
84.6 dBa
95.6 dBa
1170
Torque range
Maximum torque
10 mm (38 in)
Overall length
Height
179 mm (7 in)
Width
57 mm (2.24 in)
Part No.
Description
Impact Wrench
Part No.
Anvil
Part No.
Weight
231-6041
222-3048
231-6043
222-3048
280-2681
231-6060
222-3049
231-6061
222-3049
231-6063
222-3050 / 222-3051
231-6064
222-3050 / 222-3051
280-2682
231-6068
222-3053
231-6070
222-3053
280-2683
231-6073
222-3054
231-6071
222-3054
280-2684
231-6098
222-3055
231-6074
222-3055
280-2684
280-2676
266-3737
280-2677
266-3737
280-2675
280-2679
266-3736
280-2680
266-3736
280-2678
in - 18 NPT
ID: D00461T1
8
8
8
8
2
2
4
4
8
8
2
2
01c.qxp
10/5/06
1:25 PM
Page 67
Pneumatic Tools
Impact Wrenches
Hand Tools
Part No.
222-3050
Drive size
8000 RPM
4500 RPM
222-3053
3
in
in
8000 RPM
5000 RPM
108 dBa
92 dBa
Torque range
Maximum torque
8 mm (516 in)
10 mm (38 in)
Overall length
Weight
in - 18 NPT
ID: D00335T1
in - 18 NPT
Description
Impact Wrench
Part No.
Anvil
Part No.
231-6041
3
8
222-3048
231-6043
3
8
222-3048
280-2681
231-6060
3
8
222-3049
231-6061
3
8
222-3049
231-6063
1
2
222-3050 / 222-3051
231-6064
1
2
222-3050 / 222-3051
280-2682
231-6068
3
4
222-3053
231-6070
3
4
222-3053
280-2683
231-6073
222-3054
231-6071
222-3054
280-2684
231-6098
222-3055
231-6074
222-3055
280-2684
280-2676
3
8
266-3737
280-2677
3
8
266-3737
280-2675
280-2679
1
2
266-3736
280-2680
1
2
266-3736
280-2678
01c.qxp
10/5/06
1:25 PM
Page 68
Pneumatic Tools
Hand Tools
Impact Wrenches
ID: D00857T1
ID: D00851T1
Part No.
222-3054
Drive size
1 in
222-3055
1 in
4000 RPM
4000 RPM
4000 RPM
4000 RPM
92 dBa
92 dBa
103 dBa
103 dBa
500
505
Torque range
Maximum torque
13 mm (12 in)
13 mm (12 in)
Overall length
Height
Width
Weight
in - 14 NPT
Description
Impact Wrench
Part No.
Anvil
Part No.
231-6041
3
8
222-3048
231-6043
3
8
222-3048
280-2681
231-6060
3
8
222-3049
231-6061
3
8
222-3049
231-6063
1
2
222-3050 / 222-3051
231-6064
1
2
222-3050 / 222-3051
280-2682
231-6068
3
4
222-3053
231-6070
3
4
222-3053
280-2683
231-6073
222-3054
231-6071
222-3054
280-2684
231-6098
222-3055
231-6074
222-3055
280-2684
280-2676
3
8
266-3737
280-2677
3
8
266-3737
280-2675
280-2679
1
2
266-3736
280-2680
1
2
266-3736
280-2678
in - 14 NPT
01c.qxp
10/5/06
1:25 PM
Page 69
Pneumatic Tools
Hand Tools
ID: D00365T1
ID: D00341T1
Part No.
222-3063
Description
222-3064
222-3067
222-3069
Horsepower
0.25
0.3
Free speed
10000 RPM
5100 RPM
4500 RPM
1800 osc/min
10000 RPM
1400 RPM
2600 RPM
83 dBa
84 dBa
83 dBa
87 dBa
93 dBa
88 dBa
84 dBa
Spindle thread
5
8
152 mm (6 in)
178 mm (7 in)
178 mm (7 in)
234 x 1712
150 mm (6 in)
127 mm (5 in)
178 mm (7 in)
Backing Pad
231-9464
231-9465
231-9465
231-9467
231-9468, 246-7509
231-9469
231-9465
Buffing Pad
231-9471
in - 18 NPT
in - 11 UNC
in - 18 NPT
16
in - 11 UNC
in - 18 NPT
222-3084
6 in OASander
in - 18 UNC
222-3068
16
222-3065
16
in - 18 NPT
in - 18 UNC
in - 18 NPT
16
in - 20 UNC
in - 18 NPT
5
8
1
4
in - 11 UNC
in - 18 NPT
Recommended hose
size, ID min.
8 mm (516 in)
8 mm (516 in)
10 mm (38 in)
8 mm (516 in)
8 mm (516 in)
8 mm (516 in)
Overall length
Height
102 mm (4 in)
Weight
1.36 kg (3 lbs)
2.72 kg (6 lbs)
Compounding/
buffing pad (included)
BFS80
8 mm (516 in)
01c.qxp
10/5/06
1:25 PM
Page 70
Pneumatic Tools
Hand Tools
Air Grinders
Air Grinders
Warranty: Manufacturers
ID: D00317T1
ID: D00311T1
Part No.
222-3074
222-3076
222-3077
Tool description
Medium Mini
Die Grinder
Right Angle
Die Grinder
Extended
Die Grinder
Horsepower
0.2
0.2
0.2
Free speed
22000 RPM
20000 RPM
22000 RPM
91 dBa
93 dBa
91 dBa
1
4
1
4
1
4
in - 18 NPT
8 mm
(5
16
in)
Collet size
1
4
Overall length
in - 18 NPT
8 mm
1
4
in
(5
16
in - 18 NPT
8 mm (516 in)
in)
1
4
in
in
Weight
Part No.
222-3071
Tool description
7 in Angle Grinder
222-3072
7 in Vertical Grinder
Free speed
6000 RPM
6000 RPM
Wheel capacity
175 mm (7 in)
175 mm (7 in)
Weight
Length
Height
Sound level
85 dBa
82 dBa
Spindle thread
5
8
5
8
in - 11
in - 11
01c.qxp
10/5/06
1:25 PM
Page 71
Pneumatic Tools
Hand Tools
Air Drills
Warranty: Manufacturers
Part No.
222-3061
222-3062
Description
3
8
1
2
1
16
in Reversible
in -
in
in Reversible
ID: D00863T1
Horsepower
0.3
0.3
Free speed
2200 RPM
900 RPM
92 dBa
97 dBa
104 dBa
109 dBa
Spindle thread
3
8
3
8
Torque range
1
4
1
4
8 mm (516 in)
8 mm (516 in)
Overall length
Weight
in - 24 UNF
in - 18 NPT
in - 24 UNF
in - 18 NPT
243-6496
243-6495
234-0544
234-0545
ID: D00353T1
Tool description
Air consumption
100 dBa
2200
1
4
10 mm (38 in)
in - 18 NPT
Overall length
Weight
232-0756
01c.qxp
10/5/06
1:25 PM
Page 72
Pneumatic Tools
Hand Tools
Miscellaneous
223-4352
Part No.
Description
Size
Use
223-4352
5
8
in wide
5 in long
223-4353
Flat Chisel
4 in wide
7 in long
223-4354
Panel Cutter
in wide
6 in long
Slices bushings,
cylinder sleeves, etc.
223-4355
Slitting Chisel
1 in wide
6 78 in long
223-4356
Weld Breaker
5 in wide (tip)
8
634 in long
226-0102
Punch, 15 Degree
226-0124
Straight Punch
223-4353
223-4354
223-4355
223-4356
ID: D00551T1
3
8
Free speed
200 RPM
95.1 dBa
Torque range
1
4
10 mm (38 in)
Overall length
Weight
Warranty: Manufacturers
in
in - 18 NPT
ID: D00305T1
222-3083 Shears
Warranty: Manufacturers
ID: D00413T1
Horesepower
0.6
88.1 dBa
99.6 dBa
Cutting capacity
Width of cut
Cutting speed
Strokes
8 mm (516 in)
in - 18 NPT
Overall length
Weight
Free speed
14000 RPM
Sound level
90.0 dBa
Part No.
Description
223-4357
Needle, Coarse
10 mm (38 in)
223-4358
Needle, Medium
Hose length
223-4359
Needle, Fine
Weight
in - 18 NPT
01c.qxp
10/5/06
1:25 PM
Page 73
Pneumatic Tools
Miscellaneous
Hand Tools
Air Hose
Warranty: Manufacturers
ID: D00605T1
ID: D00581T1
Ergonomic, rugged, die cast aluminum pistol grip designed for heavy-duty use
High vacuum syphon delivers up to 60.6 l (16 gal) per hour
304.8 mm (12 in) extension for accessing difficult, hard-to-reach areas
Adjustable trigger and nozzle tip control volume and spray pattern
1 inch NPT inlet
4
Meets OSHA standards
ID: D01195T1
Part No.
Description
156-0930
156-0931
156-0932
ID: D01189T1
01c.qxp
10/5/06
1:25 PM
Page 74
Pneumatic Tools
Hand Tools
Miscellaneous
Part No.
Description
156-0927
ID: D01183T1
Description
Test Lab
Listing
4C-3302
UL/FM
4C-3304
ID: C41555T1
Gun Vac
Warranty: Manufacturers
4C-6776
Warranty: Manufacturers
Warranty: Manufacturers
0.94 l (1 qt) canister attaches to spray gun eliminating feed tubes and
buckets
Increased mobility reduces the risks of spills
Ergonomic, rugged, die cast aluminum construction pistol grip designed for
heavy-duty use
High vacuum syphon delivers up to 49.2 l (13 gal) per hour
304.8 mm (12 in) extension for accessing hard-to-reach areas
Adjustable trigger and nozzle tip control volume and spray pattern
0.95 l (1 qt) steel, reusable dispenser eliminates feed tubes and buckets
Good for lubricating trucks, automobiles, construction equipment, and
machinery
14 inch NPT inlet
Meets OSHA standards
Part No.
Description
4C-6778
ID: C41204T1
Part No.
Description
4C-6779
ID: D01135T1
01c.qxp
10/5/06
1:25 PM
Page 75
Electrical Tools
Grinders / Drills
Hand Tools
Electrical Tools
288-2512 Heavy-Duty Angle Grinder, 11,000 RPM, 4.5 inch
Warranty: Manufacturers
Turns at 11,000 RPM for maximum grinding performance and efficiency
Vibration-control side handle reduces vibration up to 60%, providing uncompromising comfort for extended
periods of work
AC/DC capability extends the versatility of the tool by working from DC outlets such as welders and generators
Sealed switch keeps debris out of the switch mechanism and extends switch life
Service Minder brushes eliminate guesswork, stop the tool when preventative maintenance is required
Epoxy-coated field windings provide ultimate protection against abrasive dust and metal debris
58 inch - 11 spindle for mounting most popular accessories
Power
120V AC/DC
Tool-free adjustable guard for quick guard installation and adjustments
Motor Amps
7.5
Spindle lock for quick wheel changes
No load speed (RPM)
11,000
2-position auxiliary handle specifically designed and angled
5 inch - 11
Spindle thread size
8
to a natural position for maximum comfort and control
1 in)
Wheel
size
114.3
mm (4
ID: 2C41367T1
Double insulated, UL listed, OSHA compliant
Length
Net weight
151-0968
Drill
30
01
Batteries
02
Case
Extra
Battery
ID: C78566T1
Battery Charger
Charges battery using a soft-pulse method for long battery cycle life
Maintains charge by trickle charging
Will detect a weak or defective pack that needs to be replaced
Built-in sensor waits for battery to cool or warm, before it begins to charge
Battery
Charger
Power
Battery voltage
12 VDC
Clutch
20 positions
Speed ranges
Shipping weight
Part No.
Description
233-9738
Voltage
120V, 60 Hz
233-9740
100V, 60 Hz
233-9741
233-9743
233-9745
01c.qxp
10/5/06
1:25 PM
Page 76
Electrical Tools
Hand Tools
Part No.
Chuck
Size
RPM
No
Load
Side
To
Center
9U-5590
0-1300
1 in
(25.4 mm)
in
(9.52 mm)
8
Volts
Full
Load
Amps
115
3.5
Overall
Length
Net Wt.
Tool Only
Max.
HP
10 in
(254 mm)
3.5 lb
(1.6 kg)
.375
(.280 kW)
Maximum Capacity
In
In
Steel
Hdwood.
3
8 in
(9.52 mm)
1 in
(25.4 mm)
ID: C44291T1
4C-9943
4C-9944
4C-9945
Length
Teeth
Qty/pkg
Teeth Specs
1U-9234
Raker BIM1
1U-9236
10
Wavy BIM
1U-9238
Wavy BIM
1U-9240
Raker HCS2
1U-9242
Wavy HCS
1U-9244
Wavy HCS
1 BIM
All purpose blade, highly flexible, for the most difficult materials.
2 HCS
ID: C68871T1
Length
Teeth/inch
Qty/pkg
Recommended Use
4C-9942
18
Heavy gauge (non-ferrous metals) bar and angle stock-stainless-galvanized pipe-tubing (over 18 ga.)
4C-9943
14
4C-9944
229 mm (9 in)
4C-9945
ID: C34472T1
Supply voltage
Ratings
15A., 125VAC
Configuration
Operating temperature
Trip threshold
5 1 mA.
Trip time
Case material
Gray nylon
Dimensions
Cord type
01c.qxp
10/5/06
1:25 PM
Page 77
Casting Salvage
Hand Tools
Casting Salvage
Full-Torque Thread Repair Kits
Unique threaded insert design repairs damaged threaded holes in cast and ductile iron, steel, and aluminum
Spiralhook threads engage tapped hole and draw surrounding metal into threads, as bolt or stud is torqued, resulting in a stronger repair
Thread Repair Solid Plug inserts allow off-center and custom-size thread repairs
Viable alternative to welding cast and ductile iron, steel, and aluminum
In many cases parts can be repaired without disassembly
Six kits with individual written installation instructions for a wide range of repair solutions
263-7140
263-7145
Description
Quantity
Part No.
Description
Quantity
263-7180
263-7160
263-7181
Rough Tap
263-7161
Rough Tap
263-7182
Finish Tap
263-7162
Finish Tap
263-7183
Installation Tool
263-7170
Installation Tool
263-7174
263-7173
D00436T1
263-7141
263-7142
263-7144
M24 Thread Insert Kit for ductile iron in OffHighway Truck and Wheel Loader wheels; can also
be used on steel fabricated and cast wheels
Part No.
Description
Quantity
Part No.
Description
Quantity
263-7178
263-7160
263-7179
Drill Fixture
263-7161
Rough Tap
263-7157
Rough Tap
263-7162
Finish Tap
263-7158
Finish Tap
263-7167
Installation Tool
263-7165
Installation Tool
263-7168
263-7173
Part No.
Description
Quantity
263-7172
263-7179
Drill Fixture
263-7155
Rough Tap
263-7156
Finish Tap
263-7163
Installation Tool
263-7164
263-7146
Thread Repair Solid Plug Insert Kit for drilling and
tapping off-center and custom-size threaded
holes1; used for repairing 797 differential retaining
bolt holes in thrust washer halves
ID: D00448T1
Part No.
Description
Quantity
263-7260
263-7177
Spotfacer
263-7255
Rough Tap
263-7256
Finish Tap
263-7258
Tapping Fluid
263-7259
Thread Sealant
263-7175
1 Maximum
is 12 inch
01c.qxp
10/5/06
1:25 PM
Page 78
Casting Salvage
Hand Tools
Tools
Part No.
Description
Quantity
263-7184
Magcheck Kit
263-7190
263-7253
263-7254
263-7249
10
D00781T1
Part No.
Description
Quantity
263-7219
263-7193
100
263-7220
25
25
263-7194
100
263-7221
25
263-7195
100
263-7222
25
263-7196
100
263-7226
263-7197
263-7223
Rough Tap
263-7198
Starting Tap
263-7224
Bottom Tap
263-7199
Bottom Tap
263-7225
Bottom Tap
263-7200
Piloted Tap
263-7251
Drilling Jig
263-7201
Drilling Jig
263-7228
Drill Stop
263-7227
Spotfacer
263-7202
100
263-7203
100
263-7230
263-7204
100
263-7232
263-7208
263-7233
Drill Stop
263-7205
Starting Tap
263-7234
Drilling Jig
263-7206
Bottom Tap
263-7207
Piloted Tap
263-7235
10
263-7250
Drilling Jig
263-7236
10
263-7238
3 each
263-7209
263-7240
263-7210
100
263-7241
263-7211
100
263-7239
Drilling Jig
263-7212
100
263-7213
100
263-7242
10
263-7197
263-7243
263-7201
Drilling Jig
263-7244
3 each
263-7215
263-7240
263-7216
263-7246
263-7217
Spotfacer
263-7245
Drilling Jig
263-7218
Drill Stop
100
10
01c.qxp
10/5/06
1:25 PM
Page 79
Tool Boxes
Cabinets
Hand Tools
Tool Boxes
Tool Storage Units
Part No.
Description
Width
Warranty: Manufacturers
292-2380
292-2381
Stainless Steel Top for the 45 in Heavy Duty Cabinet
Uniweld modular design increases the durability of cabinets
Full suspension ball bearing drawers
292-2422
Hardwood Top for the 60 in Heavy Duty Cabinet
400-pound capacity drawers
Drawer interior customization (partitions and dividers provided)
292-2423
Stainless Steel Top for the 60 in Heavy Duty Cabinet
Drawer inserts provided
30- and 45-inch roller cabinets have 6 inch, heavy duty,
900-pound-capacity casters
60-inch roller cabinet has spring loaded 6 inch, heavy duty, 1200-pound-capacity casters
Mobile handle with black end caps (handle matches cabinet color)
For the 45- and 60-inch cabinets, drawer bank widths are 20 and 27 inches
Available in 3 colors--black is the standard color, also available in blue and red
Sturdy locking mechanism included with roller cabinets
Accessories: hardwood tops, stainless steel tops, side cabinets
Part No.
Description
Color
292-2359
Black
292-2363
Red
292-2364
Blue
292-2365
Black
292-2366
Red
292-2367
Blue
292-2368
Black
292-2369
Red
292-2370
Blue
Accessories
Depth
Height
ID: D01243T1
292-2359 Roller Cabinet, 30 inch, Black
292-2363 Roller Cabinet, 30 inch, Red
292-2364 Roller Cabinet, 30 inch, Blue
Overall
Drawers
7
1
1
292-2371
Side Cabinet
Black
292-2372
Side Cabinet
Red
292-2373
Side Cabinet
Blue
292-2380
Hardwood Top
for 45 inch Roller Cabinet
n/a
292-2381
n/a
292-2422
Hardwood Top
for 60 inch Roller Cabinet
n/a
292-2423
n/a
Drawer, (3 in)
Drawer
Drawer, ()
Drawer, ()
Drawer, ()
Drawer, ()
Width
76.2 cm
(30 in)
66.04 cm
(26 in)
66.04 cm
(26 in)
66.04 cm
(26 in)
Depth
70.49 cm
(27.75 in)
70.49 cm
(27.75 in)
70.49 cm
(27.75 in)
70.49 cm
(27.75 in)
Height
Cubic cm (in)
83.82 cm 410,594 cm
(33 in)
(25,056 in)
5.72 cm
(2.25 in)
7.62 cm
(3 in)
17.78 cm
(7 in)
114.3 cm
(45 in)
114.3 cm
(40.5 in)
45.72 cm
(18 in)
45.72 cm
(18 in)
45.72 cm
(18 in)
70.49 cm
(27.75 in)
63.5 cm
(25 in)
63.5 cm
(25 in)
63.5 cm
(25 in)
63.5 cm
(25 in)
109.22 cm 716,131 cm
(43 in)
(43,701 in)
7.62 cm
(3 in)
5.08 cm
(2 in)
7.62 cm
(3 in)
15.24 cm
(6 in)
327 kg
1632.93 kg
(720 lbs) (3600 lbs)
152.4 cm
(60 in)
140.97 cm
(55.5 in)
63.5 cm
(25 in)
63.5 cm
(25 in)
63.5 cm
(25 in)
63.5 cm
(25 in)
70.49 cm
(27.75 in)
63.5 cm
(25 in)
63.5 cm
(25 in)
63.5 cm
(25 in)
63.5 cm
(25 in)
63.5 cm
(25 in)
109.22 cm 954,284 cm
(43 in)
(58,234 in)
7.62 cm
(3 in)
5.72 cm
(2.25 in)
7.62 cm
(3 in)
8.89 cm
(3.5 in)
15.88 cm
(6.25 in)
372 kg
2177.24 kg
(820 lbs) (4800 lbs)
70.49 cm 30.48 cm
(27.75 in) (12 in)
71.22 cm 153,448 cm
(28 in)
(9,364 in)
13.61 kg
(30 lbs)
45.36 kg
(100 lbs)
01c.qxp
10/5/06
1:25 PM
Page 80
Tool Boxes
Hand Tools
Cabinets
Description
214-6144
214-6145
214-6146
214-6147
214-6148
214-6149
214-7344
214-7345
ID: D00503T1
1 Combo
Description
Width
Depth
Height
Work Surfaces
223-3835
Laminated Press Board Top for the 76.2 cm (30 in) roller cabinet
223-3836
Laminated Press Board Top for the 101.6 cm (40 in) roller cabinet
223-3837
Butcher Block Top for the 134.62 cm (53 in) roller cabinet
Covers - black with CAT logo printed in yellow and white on the front of the cover
223-3832
Cover for the 76.2 cm (30 in) combo top chest and roller cabinet
223-3833
Cover for the 101.6 cm (40 in) combo top chest and roller cabinet
223-3834
Cover for the 134.62 cm (53 in) combo top chest and roller cabinet
Organizing Foam
246-7948
Organizing Foam for 214-6146 30 inch Combo for 222-7876 Student Tool Set
246-7950
Organizing Foam for 214-6149 40 inch Combo for 222-7876 Student Tool Set
Drawers
Width
Depth
Height
Cubic cm (in)
Weight
Load Capacity
Overall
74.93 cm
(29.5 in)
50.29 cm
(19.8 in)
102.36 cm
(40.3 in)
188911.6 cm
(11519 in)
86.71 kg
(191 lb)
508.48 kg
(1120 lb)
61.47 cm
(24.2 in)
44.45 cm
(17.5 in)
4.06 cm
(1.6 in)
22222 cm
(1355 in)
61.47 cm
(24.2 in)
44.45 cm
(17.5 in)
9.14 cm
(3.6 in)
75013.6 cm
(4574 in)
61.47 cm
(24.2 in)
44.45 cm
(17.5 in)
14.22 cm
(5.6 in)
38900.8 cm
(2372 in)
61.47 cm
(24.2 in)
44.45 cm
(17.5 in)
19.30 cm
(7.6 in)
52719.6 cm
(3219 in)
01c.qxp
10/5/06
1:25 PM
Page 81
Tool Boxes
Cabinets
Overall
74.93 cm
(29.5 in)
50.29 cm
(19.8 in)
49.28 cm
(19.4 in)
114603.2 cm
(6988 in)
61.47 cm
(24.2 in)
44.45 cm
(17.5 in)
4.06 cm
(1.6 in)
22222 cm
(1355 in)
61.47 cm
(24.2 in)
44.45 cm
(17.5 in)
9.14 cm
(3.6 in)
50003.6 cm
(3049 in)
74.68 cm
(29.4 in)
47.50 cm
(18.7 in)
11.94 cm)
(4.7 in
42377.6 cm
(2584 in)
Top Compartment
56.75 kg
(125 lb)
127.12 kg
(280 lb)
508.48 kg
(1120 lb)
83.54 kg
(184 lb)
51.76 kg
(114 lb)
34.05 kg
(75 lb)
101.6 cm
(40 in)
50.29 cm
(19.8 in)
102.62 cm
(40.4 in)
270878.8 cm
(16517 in)
88.14 cm
(34.7 in)
44.45 cm
(17.5 in)
4.06 cm
(1.6 in)
31865.2 cm
(1943 in)
88.14 cm
(34.7 in)
44.45 cm
(17.5 in)
9.14 cm
(3.6 in)
107551.2 cm
(6558 in)
88.14 cm
(34.7 in)
44.45 cm
(17.5 in)
14.22 cm
(5.6 in)
55776.4 cm
(3401 in)
88.14 cm
(34.7 in)
44.45 cm
(17.5 in)
19.30 cm
(7.6 in)
75686 cm
(4615 in)
Overall
101.6 cm
(40 in)
50.29 cm
(19.8 in)
49.28 cm
(19.4 in)
161080.8 cm
(9822 in)
88.14 cm
(34.7 in)
44.45 cm
(17.5 in)
4.06 cm
(1.6 in)
31865.2 cm
(1943 in)
88.14 cm
(34.7 in)
44.45 cm
(17.5 in)
9.14 cm
(3.6 in)
71700.8 cm
(4372 in)
101.35 cm
(39.9 in)
47.50 cm
(18.7 in)
11.94 cm
(4.7 in)
57514.8 cm
(3507 in)
Top Compart.
214-7345 Six Drawer Side Cabinet
Overall
41.91 cm
(16.5 in)
50.04 cm
(19.7 in)
86.36
(34 in)
87428.4 cm
(5331 in)
28.45 cm
(11.2 in)
44.45 cm
(17.5 in)
3.81 cm
(1.5 in)
4821.6 cm
(294 in)
28.45 cm
(11.2 in)
44.45 cm
(17.5 in)
8.89 cm
(3.5 in)
45001.6 cm
(2744 in)
28.45 cm
(11.2 in)
44.45 cm
(17.5 in)
29.72 cm
(11.7 in)
37605.2 cm
(2293 in)
41.91 cm
(16.5)
50.04 cm
(19.7 in)
86.36 cm
(34 in)
181252.8 cm
(11052 in)
Hand Tools
01c.qxp
10/5/06
1:25 PM
Page 82
Tool Boxes
Hand Tools
Total capacity
4536 in3
Shipping weight
Drawers
Width
Depth
Height
Chest
10
66.35 cm
(2618 in)
33.02 cm
(13 in)
51.43 cm
(2014 in)
Drawer
17.78 cm
(7 in)
31.43 cm
(1238 in)
4.76 cm
(178 in)
17.78 cm
(7 in)
31.43 cm
(1238 in)
15.55 cm
(618 in)
59.69 cm
(2312 in)
31.43 cm
(1238 in)
4.76 cm
(178 in)
59.69 cm
(2312 in)
31.43 cm
(1238 in)
9.84 cm
(378 in)
50.8 cm
(2512 in)
32.06 cm
(1258 in)
6.35 cm
(212 in)
Top
Compartment
ID: C58301T1
9S-1750 Chest
3 drawer, drop front tool chest
Weight: 17.69 kg (39 lbs),
Color: Red
Drawers
Width
Depth
Height
Chest
60.96 cm
(24 in)
26.67 cm
(1012 in)
29.84 cm
(1134 in)
Drawer
55.88 cm
(22 in)
22.86 cm
(9 in)
3.81 cm
(112 in)
55.88 cm
(22 in)
22.86 cm
(9 in)
5.08 cm
(2 in)
55.88 cm
(22 in)
22.86 cm
(9 in)
8.73 cm
(3716 in)
60.80 cm
(231516 in)
24.92 cm
(91316 in)
8.25 cm1
(314 in)1
Top
Compartment
1 Includes
height of lid
ID: C79496T1
Compartment size
Three-drawer size
Two-drawer size
One-drawer size
Weight
36 kg (79 lbs)
Storage capacity
ID: C79620T1
174-9803 Lock
Fits 174-9802 and 188-2095 Tool Chests
Lock with two keys
ID: D00119T1
01c.qxp
10/5/06
1:25 PM
Page 83
Tool Boxes
Miscellaneous
ID: C79420T1
ID: D00678T1
Description
4C-3015
4C-3016
ID: C27098T1
Part No.
Length
Width
Height
Storage
Capacity (in3)
Color
Box
8S-1602
50.6
Orange
Box
2P-8306
506.3
Orange
Box
5P-0946
900.0
Orange
Box
9S-6332
1200.0
Orange
Box
9S-1725
N/A
Red
Box
5S-6092
N/A
Red
Hand Tools
01c.qxp
10/5/06
1:25 PM
Page 84
Tool Boxes
Hand Tools
236-5134
3 Tiers including a jumbo tub sized to hold circular saws and other large
items
Large tote tray will store drills, extension cords and other bulky supplies
Top tray has eight compartments for organizing hand tools, fasteners and
supplies
V-groove in lid holds pipes and dowels in place for sawing
Includes durable caddy with retractable telescoping handle
Two large wheels for rolling over various indoor and outdoor surfaces
Dimensions: 670 x 395 x 429 mm (26.4 x 15.6 x 16.9 in)
Weight: 8 kg (17.6 lbs)
3 Tiers including a jumbo tub sized to hold circular saws and other large
items
Large tote tray will store drills, extension cords and other bulky supplies
Top tray has eight compartments for organizing hand tools, fasteners and
supplies
V-groove in lid holds pipes and dowels in place for sawing
Dimensions: 526 x 344 x 426 mm (20.7 x13.5 16.8 in)
Weight: 5 kg (11 lbs)
ID: D00301T1
236-5135
ID: D00295T1
236-5136
236-5137
ID: D00319T1
202-8643
ID: D00307T1
Plastic, water-tight container (will not rust or scratch like metal boxes)
Dimensions (width x height x depth):
514.4 x 212.7 x 225.4 mm (20.25 x 8.37 x 8.87 in)
Color: gray
Tool box capacity:
9 kg (20 lbs)
Tool box decal:
NEEG2916
ID: C80378T1
ID: D00313T1
01c.qxp
10/5/06
1:25 PM
Page 85
Tool Boxes
Cases
Hand Tools
178-2212 Case
178-2213 Dividers
Uses include organizing fastener groups and other small reusable items such as nuts, bolts, washers
Convenient to transport to a field site due to compact size
Overall case dimensions: 457 x 305 x 76 mm (18.0 x 12.0 x 3.0 in)
Dividers can partition case to a maximum of 48 bins
Dividers in packages of 12 each
ID: C80066T1
Impact-resistant
Textured surface to prevent scratches
D
C
E
ID: C80491T1
Part No.
Length A Exterior
& Interior
Length B Exterior
& Interior
Overall Length C
Exterior & Interior
Lid Depth D
Exterior & Interior
Base Depth E
Exterior & Interior
Handle
No. Of
Latches
Color
4C-4730
23 mm (0.90 in),
20 mm (0.78 in)
84 mm (3.31 in),
79 mm (3.12 in)
Yes
Two
Gray
6V-9449
Yes
Two
Black
6V-7145
43 mm (1.70 in),
35 mm (1.38 in)
84 mm (3.31 in),
79 mm (3.12 in)
Yes
Two
Black
8T-0841
95 mm (3.75 in),
83 mm (3.27 in)
95 mm (3.75 in),
92 mm (3.63 in)
Yes
Two
Black
4C-3975
44 mm (1.75 in),
35 mm (1.38 in)
95 mm (3.75 in),
92 mm (3.63 in)
Yes
Two
Black
6V-3072
25 mm (1.00 in),
16 mm (0.63 in)
76 mm (3.00 in),
73 mm (2.63 in)
Yes
Two
Black
6V-3073
99 mm (3.88 in),
90 mm (3.56 in)
30 mm (1.19 in),
24 mm (0.94 in)
68 mm (2.69 in),
65 mm (2.56 in)
Yes
Two
Black
148-5675
90 mm (3.56 in),
83 mm (3.25 in)
20 mm (0.78 in),
17 mm (0.67 in)
70 mm (2.75 in),
66 mm (2.60 in)
No
One
Black
6V-6045
41 mm (1.63 in),
33 mm (1.31 in)
10 mm(0.38 in),
3 mm (0.13 in)
31 mm (1.25 in),
30 mm (1.19 in)
No
One
Black
6V-3112
No
None
Black
Length
Width
Thickness
Material
Color
Convoluted
6V-6105
Etherfoam1
Charcoal
No
8S-5128
Esterfoam2
Charcoal
Yes
2P-8289
Esterfoam2
Charcoal
Yes
6V-4094
Esterfoam2
Charcoal
Yes
9S-8105
Ethafoam3
Charcoal
Yes
3P-1549
Ethafoam3
Black
No
6V-6126
Ethafoam3
Black
No
6V-4873
Ethafoam3
Black
No
6V-6044
Ethafoam3
Black
No
8T-3153
Ethafoam3
Black
No
6V-6107
Ethafoam3
Black
No
6V-6096
Ethafoam3
Black
No
148-5677
38 mm (1.5 in)
Etherfoam1
Charcoal
No
1 Lightweight
2 General
purpose
3 Dense
01c.qxp
10/5/06
1:25 PM
Page 86
Tool Boxes
Hand Tools
Cases
Part No.
Length
Width
Thickness
Color
Number of
Compartments
4C-3722
332.74 mm
(13.10 in)
228.60 mm
(9.00 in)
58.42 mm
(2.30 in)
Yellow
12
50.80 x 104.14 mm
(2.00 x 4.10 in)
4C-3723
332.74 mm
(13.10 in)
228.60 mm
(9.00 in)
58.42 mm
(2.30 in)
Yellow
50.80 x 101.60 mm
(2.00 x 4.10 in)
50.80 x 50.80 mm
(2.00 x 2.00 in)
12
Size
4C-3724
332.74 mm
(13.10 in)
228.60 mm
(9.00 in)
58.42 mm
(2.30 in)
Yellow
24
50.80 x 50.80 mm
(2.00 x 2.00 in) ID: C41276T1
4C-3725
332.74 mm
(13.10 in)
228.60 mm
(9.00 in)
58.42 mm
(2.30 in)
Yellow
104.14 x 104.14 mm
(4.10 x 4.10 in)
50.80 x 104.14 mm
(2.00 x 4.10 in)
6
4C-4463
332.74 mm
(13.10 in)
228.60 mm
(9.00 in)
58.42 mm
(2.30 in)
Yellow
4
1
1
50.80 x 104.14 mm
(2.00 x 4.10 in)
104.14 x 104.14 mm
(4.10 x 4.10 in)
104.14 x 317.50 mm
(4.10 x 12.50 in)
4C-4783
381 mm
(15.00 in)
298.5 mm
(11.75 in)
63.50 mm
(2.50 in)
Gray/See-through
Smoke Gray
9-24
15 Removable
Dividers
4C-4787
177.80 mm
(7.00 in)
95.3 mm
(3.75 in)
31.75 mm
(1.25 in)
Opaque
35.05 x 41.15 mm
(1.38 x 1.62 in)
28.45 x 82.55 mm
(1.12 x 3.25 in)
1
4C-4789
209.55 mm
(8.25 in)
114.3 mm
(4.50 in)
35.05 mm
(1.38 in)
Opaque
12
31.75 x 50.80 mm
(1.25 x 2.00 in)
6V-3007
332.74 mm
(13.10 in)
220 mm
(8.66 in)
58.42 mm
(2.30 in)
Opaque
13
50.80 x 50.80 mm
(2.00 x 2.00 in)
50.80 x 158.75 mm
(2.00 x 6.25 in)
50.80 x 212.85 mm
(2.00 x 8.38 in)
104.65 x 104.65 mm
(4.12 x 4.12 in)
1
1
1
152-7997
470 mm
(18.5 in)
332 mm
(13.07 in)
77 mm
(3.03 in)
Yellow
4C-3722
4C-4463
21
4C-3724
4C-3723
4C-4783
4C-4787
Sample Configurations
ID: C80500T1
4C-3725
6V-3007
01c.qxp
10/5/06
1:25 PM
Page 87
Tool Boxes
Cases
Hand Tools
ID: D01177T1
Part No.
Description
Outside
Dimensions
Inside
Dimension
Weight
Shipping
Weight
Replacement
Foam Set
Replacement
O-Ring
4C-9650 1
.91 kg
(2 lbs)
1.36 kg
(3 lbs)
4C-9651,
3 Pc.
4C-9739
4C-9652
1.13 kg
(212 lbs)
1.59 kg
(312 lbs)
4C-9653,
3 Pc.
4C-9654
Pelicase
1.8 kg
(4 lbs)
2.5 kg
(512 lbs)
4C-9655,
3 Pc.
4C-9741
4C-9656
Pelican Case
3.2 kg
(7 lbs)
3.9 kg
(812 lbs)
4C-9657,
3 Pc.
4C-9742
4C-9658 1
4.5 kg
(10 lbs)
6.2 kg
(14 lbs)
4C-9659
4 Pc.
4C-9743
4C-9660
6 kg
(13 lbs)
11.5 kg
(17 lbs)
4C-9661
4 Pc.
4C-9744
4C-9662
6.8 kg
(15 lbs)
7.7 kg
(17 lbs)
4C-9663,
3 Pc.
4C-9745
4C-9664 2
11.8 kg
(26 lbs)
13 kg
(29 lbs)
4C-9665
3 Pc.
4C-9746
1 Fold-down
2 Supplied
handle.
01c.qxp
10/5/06
1:25 PM
Page 88
Slings
Hand Tools
Slings
Slings
137-4370 Leveling Assembly
Model: 994 and 994D with 3512 Engines and other similar applications
Warranty: Manufacturers Two Year Limited
Saves time by eliminating constant readjustment (raising and lowering) of lifting device to obtain a stable, level load
Designed for engine use can also be used on transmissions or other similar applications
Used to adjust and keep load level during lifting procedures by retracting or extending hydraulic cylinder on leveling beam
Adjusts center of gravity while load is suspended from overhead crane or other suitable device
Allows small adjustments to keep a load level at all times
Connects to overhead lifting hoist system for lifting heavy loads
Uses a heavy-duty air over hydraulic system
Capacity
13,608 kg (30,000 lbs)
Includes a remote operation air hydraulic switch with a 7.62 m (25.0 ft) cable
Length
2997 mm (118.0 in)
ASME B30.9, ANSI 120.74; Australian Standards AS1353.1 and AS1353.2 compliant
Repair Information
Reference
Width
Height
9S-9101
9S-9100
Load capacity
4000 lb
2000 lb
Chain size
5
16
1
4
Chain length
62 in
54 in
43
43
Gear ratio
82-1
34-1
Drive size
5
8
5
8
in
in Hex
Reference
in
in Hex
N
AI
CH E IN ING
A92061T1
T
43 USID:
E
LIF
AD FOR AD
R
G
T
HE
NO
ER
V
O
Link Brackets
SMCS Code: 7063-017, 7063-010, 0632
Model: 5000 Series Mining Excavators and General Usage
Used to remove or install large components such as excavator swing gears
(provides acceptable method of attaching hoist to component)
138-7575 Link Bracket is used specifically to remove and install swing gear
and bearing assembly on 5130 and 5230 Mining Excavators
All link brackets meet ANSI Standards for lifting devices.
Bolts directly onto swing bearing/gear or other component (always use Grade 8 bolts
to attach link bracket to component)
Requires less clearance than standard eye bolt and makes placement/alignment
of swing gear/bearing much faster and simpler
Used for any general purpose lifting where bracket can be attached to component
These link brackets are 100% proof tested at two times the working load limit.
They comply with the requirements of ANSI/ASME B30.9-1984 as noted on the
Certificate of Proof Test contained with each piece.
ID: C66834T1
Working
Load Limit
Minimum
Bolt Torque
Part No.
Bolt Size
163-6455
36 mm
138-7576
30 mm (114 in)
138-7574
(34 in)
Reference
138-7575
(12 in)
95 Nm (70 lb ft)
SEHS9721 Special Instruction, Assembly Procedure for Hydraulic Excavator (5130 only)
138-7573
(38 in)
43 Nm (32 lb ft)
01c.qxp
10/5/06
1:25 PM
Page 89
Slings
Slings
Hand Tools
Construction
Made from two complete and separate slings (cords), combined into one (provides unique back-up system in case
of failure of either cord)
Inner load carrying cords are constructed of interwoven high performance fibers which provide excellent chemical
resistance and have less than 1 percent elongation at working load.
Separate inner cords are encased in a double-walled fabric tube inner tube is made of polyester while outer tube
is made of a bulked, abrasion-resistant nylon.
All slings are labeled with model number, serial number, length, load capacities, and warnings.
Inside depth
Outside width
Pin diameter
38 mm (1.5 in)
Weight
Material
Safety
140-7738 and 140-7741 Slings meet all applicable national, international, and industry standards, including,
but not limited to: ASME B30.9, ANSI 120.74, and Japanese standards.
141-0288 and 141-0289 Slings meet all applicable national, international, and industry standards, including,
but not limited to: CE Certification and Australian Standards AS4497.1 and AS4497.2.
Contrasting color coded slings provide extra protection and early warning (if red inner tube or cords are visible,
the sling should be immediately removed from service and repaired by manufacturer).
Two Tell Tail cords are used as an indicator of shock or overloading of sling (cords should protrude 13 mm (.5 in)
beyond label tag and if shorter, sling should be returned to manufacturer for evaluation).
A Fiber Optic Tell Tail cord is used to determine if inner core fibers are damaged or broken if light from one end of cord
will not shine through to opposite end, the sling is probably damaged and should be returned to manufacturer for evaluation.
All slings are proof-tested to twice their rated capacity.
Width
Inside diameter
Weight
Material
alloy steel
143-8699 Shackle Link Plate
(Synthetic Sling Saver)
Hardware
Thickness
A shackle is used to attach hooks, links, chains, or other lifting systems to fabric slings.
Shackles extra wide contact area gives increased load distribution to sling fabric and allows sling to achieve
up to 100 percent of its rated load lifting capacity.
A spool keeps the loaded hook centered on the shackle pin and spreads lifting load evenly across pin.
A link plate allows attachment of two shackles to lifting hook.
Width
Length
Hole diameter
Reference
Weight
Material
alloy steel
Special Instruction: REHS0033, 777D Off-Highway Truck; SEHS9980, 793C Off-Highway Truck;
SEHS9992, 769D/771D Off-Highway Truck; SEHS9993 773D/775D Off-Highway Truck
Part No.
Description
Lifting Capacity
Basket
Length
Width
Vertical
75 mm (3.0 in)
75 mm (3.0 in)
Choker
1 For
2 Required
Fiber Optic
Tell Tail Cord
140-7742
ID: C78495T1
01c.qxp
10/5/06
1:25 PM
Page 90
Slings
Hand Tools
Slings
5P-4153 Sling
SMCS Code: 4200-010
Model: Most Caterpillar Models
WARNING
Inspect sling for damage before each use and remove from service if
damaged. Do not overload, cut, or expose to temperatures above 82C (180F).
Use of damaged sling may result in personal injury.
Rated
Sling Eye
No. of
Capacity
Part No. Length Width Length Body Plys Choker
Vertical
Basket
3 ft
1 in
2,480 lb
3,100 lb
6,200 lb
1U-8222
4 ft
1 in
2,480 lb
3,100 lb
6,200 lb
1U-8223
6 ft
1 in
2,480 lb
3,100 lb
6,200 lb
1U-8224
8 ft
1 in
2,480 lb
3,100 lb
6,200 lb
1U-8225
6 ft
2 in
4,960 lb
6,200 lb
12,400 lb
Lifting Capacity
1U-8226
8 ft
2 in
4,960 lb
6,200 lb
12,400 lb
Choker hitch
1U-8227
10 ft
2 in
4,960 lb
6,200 lb
12,400 lb
Basket hitch
1U-8228
6 ft
3 in
7,440 lb
9,300 lb
18,600 lb
1U-8229
8 ft
3 in
7,440 lb
9,300 lb
18,600 lb
1U-8230
10 ft
3 in
7,440 lb
9,300 lb
18,600 lb
1U-8231
8 ft
4 in
9,920 lb
12,400 lb
24,800 lb
1U-8232
10 ft
4 in
9,920 lb
12,400 lb
24,800 lb
1U-8233
12 ft
4 in
9,920 lb
12,400 lb
24,800 lb
3 ft
1 in
8 in
1,240 lb
1,550 lb
3,100 lb
1U-8235
4 ft
1 in
8 in
1,240 lb
1,550 lb
3,100 lb
1U-8236
6 ft
1 in
8 in
1,240 lb
1,550 lb
3,100 lb
1U-8237
8 ft
1 in
8 in
1,240 lb
1,550 lb
3,100 lb
1U-8238
10 ft
1 in
8 in
1,240 lb
1,550 lb
3,100 lb
1U-8239
12 ft
1 in
8 in
1,240 lb
1,550 lb
3,100 lb
1U-8240
4 ft
2 in
8 in
2,480 lb
3,100 lb
6,220 lb
1U-8241
6 ft
2 in
8 in
2,480 lb
3,100 lb
6,220 lb
1U-8242
8 ft
2 in
8 in
2,480 lb
3,100 lb
6,220 lb
1U-8243
10 ft
2 in
8 in
2,480 lb
3,100 lb
6,220 lb
1U-8244
12 ft
2 in
8 in
2,480 lb
3,100 lb
6,220 lb
1U-8245
14 ft
2 in
8 in
2,480 lb
3,100 lb
6,220 lb
1U-8256
6 ft
2 in
8 in
4,960 lb
6,200 lb
12,400 lb
1U-8257
8 ft
2 in
8 in
4,960 lb
6,200 lb
12,400 lb
1U-8258
10 ft
2 in
8 in
4,960 lb
6,200 lb
12,400 lb
1U-8259
12 ft
2 in
8 in
4,960 lb
6,200 lb
12,400 lb
8 ft
3 in
9 in
3,720 lb
4,650 lb
9,300 lb
1U-8247
10 ft
3 in
9 in
3,720 lb
4,650 lb
9,300 lb
1U-8248
12 ft
3 in
9 in
3,720 lb
4,650 lb
9,300 lb
1U-8249
14 ft
3 in
9 in
3,720 lb
4,650 lb
9,300 lb
1U-8250
16 ft
3 in
9 in
3,720 lb
4,650 lb
9,300 lb
1U-8251
10 ft
4 in
10 in
4,960 lb
6,200 lb
12,400 lb
1U-8252
12 ft
4 in
10 in
4,960 lb
6,200 lb
12,400 lb
1U-8253
14 ft
4 in
10 in
4,960 lb
6,200 lb
12,400 lb
1U-8254
16 ft
4 in
10 in
4,960 lb
6,200 lb
12,400 lb
1U-8255
18 ft
4 in
10 in
4,960 lb
6,200 lb
12,400 lb
1U-8260
10 ft
3 in
9 in
7,440 lb
9,300 lb
18,600 lb
1U-8261
12 ft
3 in
9 in
7,440 lb
9,300 lb
18,600 lb
1U-8262
14 ft
3 in
9 in
7,440 lb
9,300 lb
18,600 lb
1U-8263
16 ft
3 in
9 in
7,440 lb
9,300 lb
18,600 lb
1 On
wider slings, tapered eyes provide a configuration designed for easier use
with chain hooks.
ID: A10264T1
02a.qxp
10/5/06
1:25 PM
Page i
Shop Supplies
Abrasive
Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16
Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22
Metal Cutting
Drills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-28
Taps and Dies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-31
Thread Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-37
Cutting Torch Equipment . . . . . . . . . . . . . . . . . . . . . . . . 2-48
Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-48
Caps and Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-49
Vises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-56
Battery Service Equipment . . . . . . . . . . . . . . . . . . . . . 2-59
Vehicular Caterpillar Batteries
and Worklights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-64
Lighting/Electrical Products
Flashlights and Batteries . . . . . . . . . . . . . . . . . . . . . . . . 2-67
Work Lights and Extension Cords . . . . . . . . . . . . . . . . . 2-70
Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-76
Personal/Safety
First Aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-78
Personal Protection Items . . . . . . . . . . . . . . . . . . . . . . . . 2-80
Hand Protection Gloves . . . . . . . . . . . . . . . . . . . . . . . 2-92
Padlocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-97
Chemical Spill Protection . . . . . . . . . . . . . . . . . . . . . . . . 2-98
Towels and Wiper Products . . . . . . . . . . . . . . . . . . . . . . 2-104
Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-108
Disposal and Storage Products
for Hazardous Material . . . . . . . . . . . . . . . . . . . . . . . . 2-115
Material Handling, Storage, Packaging, and Shipping
Tape and Tape Dispensers . . . . . . . . . . . . . . . . . . . . . . . 2-116
Packaging Material and Accessories . . . . . . . . . . . . . . . 2-120
Janitorial Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-126
Ladders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-127
Hardware and Seal Kits . . . . . . . . . . . . . . . . . . . . . . . . 2-128
02a.qxp
10/5/06
1:25 PM
Page ii
02a.qxp
10/5/06
1:25 PM
Page 1
Abrasive
Brushes
Brushes
Abrasives Safety and Storage
Safety
To avoid injury always wear impact-resistant protective glasses, full face shield,
safety shoes, arm guards, leather gloves and apron for all grinding operations.
Speed
MAXIMUM SAFE FREE SPEED (MSFS) is the maximum RPM at which the brush
should be operated with no work applied (spinning free). It is not the recommended
operating speed. The application determines the recommended operating speed,
which should never exceed the MSFS brush ratings marked on the brush and/or
shown in this catalog. Periodic speed checks of the spindle are the responsibility
of the operator and user.
In all cases where MSFS is not indicated, and on special brushes, contact Shop
Supplies and Tools Group for specific operating speed details.
Protective Equipment
The potential of serious injury exists for both the brush operator and others in
the work area (possibly 50 or more feet from the brush). To protect against this
hazard, before rotating the brush, during rotation, and until rotation stops operators
and others in the area must wear SAFETY GOGGLES or FULL FACE SHIELDS WORN
OVER SAFETY GLASSES WITH SIDE SHIELDS. Comply with the requirements of
ANSI Z87.1-1979 Occupational Eye and Face Protection.
Appropriate protective clothing and equipment (such as gloves, respirators, etc.)
shall be used where there is probability of injury that can be prevented by such
clothing or equipment.
Certain brushing operations, because of their nature and location, may require
an enclosure to isolate the operation from other personnel.
Machine Guards
Rotating power brushes should be used only on machines that are equipped with
safety guards, and these guards must be kept in place at all times.
Starting the Brush
Jog the machine before starting to determine if it is ready to use, and that the
brush is fastened securely. Run the brush at operating speed with safety guards in
place for at least one minute before applying work. Do not stand in front of or in
line with the brush during this time.
Brush Pressure
Avoid excessive pressure against the work. This reduces the efficiency of the brush
and could cause premature failure during operation.
Comply with the Safety Standards of the Industrial Division of the American Brush
Manufacturers Association and the American National Standards Institute B
165.1-1985 Safety Requirements for the Design, Care and Use of Power Driven
Brushing Tools, and B 165.2-1982 Safety Requirements for the Design, Care and
Use of Power Driven Brushing Tools constructed with wood, plastic, or composition
hubs and cores.
Shop Supplies
02a.qxp
10/5/06
1:25 PM
Page 2
Abrasive
Brushes
Brushes Terminology
Outside Diameter
Brushes with low density offer greater brush flexibility. The relatively high degree
of freedom of the brush wires makes for quick and efficient removal of rust, scale
and other incrustations from surfaces by the impact resulting from the whip-like
impingement of the wires on the surface.
Flexibility
That quality of a brush which determines resiliency and ability to reach into
confined areas and conform to uneven or contoured surfaces.
Inside Diameter
Diameter of brush back. Increasing the inside diameter of a brush while
maintaining the outside diameter results in a stiffer, less flexible brush face.
Shop Supplies
Trim Length
Length of fill material extending beyond brush back or face plates. A short trim
makes a stiff fast cutting brush, while a long trim gives a brush the flexibility to
contact irregular surfaces.
Fill Density
Brushes with high density are used to produce finer surface finishes, and also
where fast cutting action is required; for example, burr removing operations.
Observed Result:
Observed Result:
Corrections Suggested:
Corrections Suggested:
Corrections Suggested:
Observed Result:
Brush works too fast
Corrections Suggested:
1. Reduce surface speed by reducing RPM of O.D.
Observed Result:
Observed Result:
Corrections Suggested:
Corrections Suggested:
Part No.
Pkg.
Qty.
1U-9957
Dia.
Arbor Hole
(A.H)
Threaded Size
Wire
Size
Max Safe
Free Speed
RPM
76.2 mm (3 in)
25,000
ID: C80425T1
02a.qxp
10/5/06
1:25 PM
Page 3
Abrasive
Brushes
Part No.
Pkg.
Qty.
Wheel
Dia.
Arbor
Hole
Wire
Size
Face Width
1U-9971
152.4 mm (6 in)
6,000
1U-9972
152.4 mm (6 in)
25.4 mm (1 in)
6,000
1U-9973
177.8 mm (7 in)
25.4 mm (1 in)
6,000
1U-9974
203.2 mm (8 in)
25.4 mm (1 in)
4,500
ID: C33524T1
Shop Supplies
Part No.
Pkg.
Qty.
Description
Wire
Size
1U-9939
Knot Style
25.4 mm (1 in)
20,000
1U-9942
Circular End
15,000
1U-9943
Knot Style
19 mm (34 in)
20,000
1U-9946
Galvanized
76.2 mm (3 in)
5,000
4C-6157
25,000
4C-6158
Knot Style
25.4 mm (1 in)
20,000
Dia.
ID: D01191T1
Wire Brushes
Used to clean large metal surfaces
Remove burrs, weld scale, and rust
Good for edge blending
and surface preparation
ID: D01275T1
ID: D01221T1
Part No.
Quantity
Description
Size
Wire
Gauge RPM
Arbor
Length x Width
262-9720
152.4 mm (6 in)
.023
6,000
262-9721
1 box of 10 brushes
.006
22,000
262-9722
1 box of 10 brushes
19 mm (34 in)
.006
262-9723
1 box of 10 brushes
25.4 mm (1 in)
.006
262-9724
1 box of 10 brushes
152.4 mm (6 in)
.014
6,000
262-9725
152.4 mm (6 in)
.014
6,000
262-9726
1 box of 10 brushes
.020
262-9727
1 box of 10 brushes
19 mm (34 in)
262-9728
1 box of 10 brushes
25.4 mm (1 in)
262-9729
1 box of 10 brushes
19 mm (34 in)
.014
8-11
1
4
Steel
in
Steel
20,000
Steel
20,000
Steel
Steel
Steel
22,000
Steel
.020
20,000
Steel
.020
Steel
Steel
8-11
8-11
Shank Material
02a.qxp
10/5/06
1:25 PM
Page 4
Abrasive
Brushes
Part No.
Diameter
Wire Size
1U-9941
19 mm (3/4 in)
20,000
4C-6153
25 mm (1 in)
20,000
4C-6154
25 mm (1 in)
20,000
1U-9940
25 mm (1 in)
20,000
249-5284
38 mm (1.5 in)
25,000
249-5285
51 mm (2 in)
25,000
249-5286
64 mm (2.5 in)
25,000
1U-9945
76 mm (3 in)
5,000
Shop Supplies
ID: C27131T1
Part No.
Brush Diameter
4C-6342
4C-6343
101.6 mm (4 in)
1U-7429
1U-9788
127 mm (5 in)
4C-6344
4C-6345
152.4 mm (6 in)
4C-6346
4C-6347
177.8 mm (7 in)
4C-6348
4C-6349
203.2 mm (8 in)
4C-6350
Brush Diameter
Brush Length
Qty.
266-2281
51 mm (2 in)
48
264-4355
13 mm (1/2 in)
51 mm (2 in)
48
266-2282
16 mm (5/8 in)
51 mm (2 in)
48
264-4357
19 mm (3/4 in)
51 mm (2 in)
48
264-4358
22 mm (7/8 in)
102 mm (4 in)
48
266-2283
32 mm (1.25 in)
102 mm (4 in)
48
264-4372
38 mm (1.5 in)
102 mm (4 in)
48
264-4352
51 mm (2 in)
102 mm (4 in)
48
ID: D00643T1
Tube Brushes
Part No.
Pkg. Qty.
Description
O.D.
Wire
4C-6160
4C-6161
Max RPM
02a.qxp
10/5/06
1:25 PM
Page 5
Abrasive
Brushes
Part No.
Overall Size (L x W)
262-4868
Bristle Length
Pkg. Qty.
12
ID: D00655T1
Part No.
Diameter
Overall Length
Bristle Length
Pkg. Qty.
264-4359
25 mm (1 in)
25 cm (10 in)
64 mm (2.5 in)
12
ID: D00649T1
Used to clean curved and irregular shaped parts with hard to reach areas
Use in place of wire wheels, hand scrapers, and wire brushes
Typical applications include cleaning up both hydraulic cylinders and engine lower bores
Can also be used to clean rust, carbon deposits, adhesives, and tough coatings
Part No.
Pkg.
Qty.
Description
Diameter
4C-8630
CPFB-S A Medium
Maximum
Operating Speed
Optimum
Operating Speed
Use with:
ID: C34432T1
8,500
8,500
Grinder/Hand Drill
Non-woven surface conditioning material and aluminum-oxide abrasive flaps with cloth backing
Epoxy filled center with 6.4 mm (.25 in) shank
Used to clean curved and irregular shaped parts with hard to reach areas
Use in place of wire wheels, hand scrapers, and wire brushes
Typical applications include cleaning up both hydraulic cylinders and engine lower bores
Can also be used to clean rust, carbon deposits, adhesives, and tough coatings
Part No.
Size
Grade
254-5310
38 x 25 mm (1.5 x 1 in)
Coarse
Grit
60
254-5311
38 x 25 mm (1.5 x 1 in)
Medium
120
254-5312
38 x 25 mm (1.5 x 1 in)
Very Fine
240
254-5313
76 x 51 mm (3 x 2 in)
Coarse
60
254-5314
76 x 51 mm (3 x 2 in)
Medium
120
254-5315
76 x 51 mm (3 x 2 in)
Very Fine
240
ID: D00631T1
Shop Supplies
02a.qxp
10/5/06
1:25 PM
Page 6
Abrasive
Discs
Discs
Type 29 Zirconium Flap Discs
Shop Supplies
Grind and finish in one operationgood for heavy stock removal as well
as finishing reduces downtime
Three popular grits ideal for iron, aluminum, stainless steel, sheet metal,
copper, brass, fiberglass, masonry, and even wood
Unique design allows for consistent sharp edge as wheel wears away
Has a built-in angle for less operator fatigue
Fiberglass reinforced backer
Long lasting Zirconia grain cloth-backed flaps
Part No
Size
Grade
Pkg. Qty.
236-8105
ZIR 24
10
236-8106
ZIR 36
10
236-8107
ZIR 60
10
236-8109
ZIR 80
10
236-8111
ZIR 120
10
236-8112
ZIR 24
10
236-8113
ZIR 36
10
236-8114
ZIR 60
10
236-8115
ZIR 80
10
236-8116
ZIR 120
10
254-5336
ZIR 36
10
254-5337
ZIR 60
10
254-5338
ZIR 80
10
ID: D00595T1
Part No.
Outside Diameter
Hub Thread
Grade
Pkg. Qty.
254-5339
5 -11
8
36G
10
254-5340
5 -11
8
60G
10
254-5341
5 -11
8
80G
10
254-5342
178 mm (7 in)
5 -11
8
36G
10
254-5343
178 mm (7 in)
5 -11
8
60G
10
254-5344
178 mm (7 in)
5 -11
8
80G
10
ID: D00601T1
ID: D00607T1
Part No.
Outside Diameter
Pkg. Qty.
254-5345
5 -11
8
36 grit
10
254-5346
5 -11
8
60 grit
10
254-5347
5 -11
8
80 grit
10
254-5348
5 -11
8
120 grit 10
254-5349
178 mm (7 in)
5 -11
8
36 grit
10
254-5350
178 mm (7 in)
5 -11
8
60 grit
10
254-5351
178 mm (7 in)
5 -11
8
80 grit
10
02a.qxp
10/5/06
1:26 PM
Page 7
Abrasive
Discs
Diameter
Maximum
Operating Speed
Optimum
Operating Speed
Description
5P-9709
25
Use With:
177.8 mm (7 in)
6,000
4,500
6V-0185
25
Grinder
127.0 mm (5 in)
10,000
10,000
1U-7622
Grinder
25
101.6 mm (4 in)
13,000/18,0001
10,000
Grinder/Hand Drill
4C-4384
25
76.2 mm (3 in)
13,000
15,000
Grinder/Hand Drill
4C-4383
50
50.8 mm (2 in)
13,000
18,000
Grinder/Hand Drill
1 Maximum
speed is 13,000 if used with 4C-4763 Disc Pad Holder or 4C-4764 Disc Pad Holder and 155-3595 Adapter;
maximum speed is 18,000 if used with 1U-7623.
ID: C33433T1
Part No.
Package
Quantity
Diameter
Maximum
Operating Speed
Optimum
Operating Speed
Description
9U-6921
10
SE Disc A Coarse
177.8 mm (7 in)
6,000
4,500
9U-6922
10
Grinder
SE Disc A Coarse
127.0 mm (5 in)
10,000
10,000
Grinder
9U-6923
10
SE Disc A Coarse
10,000
10,000
Grinder
9U-6924
10
SE Disc A Coarse
101.6 mm (4 in)
13,000/18,0001
10,000/15,000
Grinder/
Hand Drill
9U-6925
10
SE Disc A Coarse
13,000
10,000
Grinder/
Hand Drill
9U-6926
10
Roloc A Coarse
76.2 mm (3 in)
18,000
15,000
Die Grinder/
Hand Drill
9U-6927
10
Roloc A Coarse
50.8 mm (2 in)
25,000
21,000
Die Grinder/
Hand Drill
Use with:
1 Maximum
speed is 13,000 if used with 4C-4763 Disc Pad Holder or 4C-4764 Disc Pad Holder and 155-3595 Adapter;
maximum speed is 18,000 if used with 1U-7623.
Shop Supplies
Part No.
Pkg.
Qty.
02a.qxp
10/5/06
1:26 PM
Page 8
Abrasive
Discs
Shop Supplies
Part No.
Pkg.
Qty.
ID: C44337T1
Use With:
Description
Diameter
Hub/Shank
Maximum
Operating Speed
6,000
5P-9718
5P-9709
Holder
177.8 mm (7 in)
in-11
6V-0186 1
6V-0185
Holder
127.0 mm (5 in)
in-11
4C-4763
1U-7622
Pad Holder
101.6 mm (4 in)
M14 x 2
13,000
4C-4764
1U-7622
Pad Holder
101.6 mm (4 in)
13,000
1U-7623
1U-7622
Pad Holder
101.6 mm (4 in)
18,000
4C-4382
4C-4384
Pad Holder
76.2 mm (3 in)
20,000
4C-4381
4C-4383
Pad Holder
50.8 mm (2 in)
20,000
1U-5520
9U-6926
76.2 mm (3 in)
18,000
1U-5519
9U-6927
50.8 mm (2 in)
25,000
1U-5518
1U-5519/1U-5520
1 Female, 5
8
8
8
4,800
in-11
Pkg.
Qty.
Maximum
Operating Speed
Optimum
Operating Speed
1U-5516
25
25,000
18,000
Die Grinder,
Hand Drill
1U-5517
25
15,000
15,000
Die Grinder,
Hand Drill
Part No.
Pkg.
Qty.
Description
Diameter
Maximum
Operating Speed
Use With
1U-5520
76.2 mm (3 in)
15,000
1U-5519
50.8 mm (2 in)
25,000
1U-5518
Description
Diameter
Use With
Disc Holders
02a.qxp
10/5/06
1:26 PM
Page 9
Abrasive
Discs
OptimumID: C33435T1
Operating Speed
Use With:
152.4 x 6.35 mm
(6 x 14 in)
4,000
3,200
Straight Grinder
and Hand Drill
152.4 x 12.7 mm
(6 x 12 in)
4,000
3,200
Straight Grinder
and Hand Drill
101.6 x 6.35 mm
(4 x 14 in)
6,000
4,500
Straight Grinder
and Hand Drill
152.4 x 6.35 mm
(6 x 14 in)
4,000
3,200
Straight Grinder
and Hand Drill
Pkg.
Qty.
6V-4086
Description
Diameter
8T-3054
4C-3868
279-2267
ID: C44340T1
ID: C44339T1
Holders
Part No.
Pkg.
Qty.
Use With:
Description
Diameter
Hub/Shank
Maximum
Operating Speed
8T-3055
8T-3054
Mandrel #934
4,000
6V-4087
6V-4086/4C-3868
Mandrel #933
6,000
Shop Supplies
Maximum
Operating Speed
Part No.
02a.qxp
10/5/06
1:26 PM
Page 10
Abrasive
Discs
Fine Grade
Very fine grade minimizes the chance of changing the surface profile
Identified by blue/green color both front and back of disc
Medium Grade
Shop Supplies
Medium grade material used much like coarse but is less aggressive in performance
used when very fine surface condition material is not quite aggressive enough
Ideal for work requiring less pressure such as grind marks, surface rust, and mild coatings
Brown disc with gray backing
ID: C33433T1
Part No.
Package
Quantity
Description
Diameter
Maximum
Operating Speed
Optimum
Operating Speed
150-1197
10
177.8 mm (7 in)
6,000
4,500
Grinder
150-1244
10
127.0 mm (5 in)
10,000
10,000
Grinder
150-1246
10
101.6 mm (4 in)
13,000/18,0001
10,000/15,000
Grinder/
Hand Drill
150-1248
10
76.2 mm (3 in)
18,000
15,000
Die Grinder/
Hand Drill
150-1250
10
50.8 mm (2 in)
25,000
21,000
Die Grinder/
Hand Drill
236-8092
25
Scuffing Disc
Medium
76.2 mm (3 in)
23,000 rpm
23,000 rpm
Grinder
1 Maximum
Use with:
speed is 13,000 if used with 4C-4763, (4C-4764, 155-3595); maximum speed is 18,000 if used with 1U-7623.
ID: C44337T1
Holders
Actual
Diameter
Maximum
Hub/Shank
Maximum
Operating
Speed
Optimum
Operating
Speed
Part No.
Qty.
Use with:
Description
Diameter
5P-9718
150-1197
Holder
177.8 mm (7 in)
5
8
in-11
6,000
4,500
6V-0186
150-1244
Holder
127.0 mm (5 in)
5
8
in-11
10,000
10,000
4C-4763
150-1246
Holder 914
101.6 mm (4 in)
M14 x 2
13,000
10,000
4C-4764
150-1246
Holder 914
101.6 mm (4 in)
5
8
in-11
13,000
10,000
4C-4765
150-1246
Holder 925
101.6 mm (4 in)
3
8
in-24
13,000
10,000
1U-7623
150-1246
Holder 925
101.6 mm (4 in)
1
4
in Shaft
18,000
10,000
1U-5520
150-1248
76.2 mm (3 in)
20,000
15,000
1U-5519
150-1250
50.8 mm (2 in)
25,000
20,000
1U-5518
1U-5519/1U-5520
4C-4382
150-1252
76.2 mm (3 in)
20,000
15,000
4C-4381
150-1251
50.8 mm (2 in)
23,000
20,000
02a.qxp
10/5/06
1:26 PM
Page 11
Abrasive
Discs
Part No.
Package
Quantity
Description
Maximum
Operating Speed
Optimum
Operating Speed
9U-6928
10
Disc A Coarse
Use with:
127.0 x 22.23 mm
(5x 78 in)
10,000
10,000
Grinder
9U-6929
10
Disc A Coarse
101.6 x 22.23 mm
(4 x 78 in)
13,000
10,000
Grinder
ID: C62936T1
Bristle design and 3-dimensional abrasives enable Bristle Disc to remove carbon buildup, coatings, sealants, gaskets and weld discoloration quickly, leaving a clean
surface ready for subsequent operations or inspection
Used with rotary tool such as drill or small angle grinder
Designed to compete with crimped wire and bristle cup brushes
Extends range of surface reconditioning operations where conformability and flexibility are most critical
Provides exceptional finish, outstanding performance and a safer workplace by eliminating flying metal wires
Come in 3 sizes and 3 grades
All R-style holders use 1U-5518 Threaded Shaft
Shaft size
10
50 grit discs
80 grit discs
corrosion removal,
sealant removal
and general
maintenance repair
operations
aluminum parts
ID: C66972T1
Optimum
Operating
Speed
Item
Part No
Description
Diameter
Size
Pkg.
Qty.
Grit
Color
138-4523
Bristle Disc
25 mm (1.0 in)
10
50
Green
30,000
25,000
138-4524
Bristle Disc
25 mm (1.0 in)
10
80
Yellow
30,000
25,000
151-8101
Bristle Disc
25 mm (1.0 in)
10
120
White
30,000
25,000
138-4528
Bristle Disc
51 mm (2.0 in)
10
50
Green
25,000
18,000
138-4529
Bristle Disc
51 mm (2.0 in)
10
80
Yellow
25,000
18,000
138-4530
Bristle Disc
51 mm (2.0 in)
10
120
White
25,000
18,000
138-4534
Bristle Disc
76 mm (3.0 in)
10
50
Green
20,000
15,000
138-4535
Bristle Disc
76 mm (3.0 in)
10
80
Yellow
20,000
15,000
138-4536
Bristle Disc
76 mm (3.0 in)
10
120
White
20,000
15,000
151-8102
25 mm (1.0 in)
1U-5519
51 mm (2.0 in)
1U-5520
76 mm (3.0 in)
1U-5518
Threaded Shaft
Not shown
150-5431
51 mm (2.0 in)
Shop Supplies
02a.qxp
10/5/06
1:26 PM
Page 12
Abrasive
Discs
Bristle Discs
Shop Supplies
Bristle design and 3-dimensional abrasive filled fingers enable bristle disc to remove carbon buildup, coatings, sealants,
gaskets, and weld discoloration quickly, leaving a clean surface ready for subsequent operations or inspection
Used with rotary tool such as drill or right angle grinder can be used with 141-6993 Heavy-Duty Angle Grinder
Used for coating removal, weld preparation, and general cleaning
Increased safety during use bristles are mounted securely to backing, virtually eliminate flying wires common
with wire brushes
Flexible, abrasive-filled bristles conform to part's surface and clean without removing base material, helping
reduce damage and rework
Unique bristle shape resists excessive edge wear and loading with coatings, dirt, and debris to extend disc
life and performance
Resists heat build-up to reduce potential tempering or work surface damage
Threaded 58-11 inch core quickly threads onto shaft of an electric or pneumatic right angle grinder
Color coding makes abrasive grade selection quick and easy
Optimum
Operating
Speed
12,000 rpm
Internal thread
5 -11
8
ID: C80352T1
Part No
Size
Grit
Color
Maximum
Operating
Speed
165-3945
412
50
Green
12,000
10,000
165-3946
412
80
Yellow
12,000
10,000
165-3947
412
120
White
12,000
10,000
Aluminum parts
Application
Fiber Discs
Zirconium Fiber Discs with 7/8 inch Arbor Hole
Used for medium and heavy stock removal on right-angle sanding equipment for:
- Cutting down and blending weld lines
- Cutting down filler metal, rust and scale removal, as well as deburring
Zirconium premium grain (except where noted) outlasts aluminum oxide and runs cooler
Performs well on stainless steel and high-tensile alloys
22 mm (7/8 in) center hole for use with 58-11 arbor (except 236-8069 which has
16 mm (58 in) center hole)
Resin bond with fiber backing for strength
Used with rib-flow backup pads 254-5307, 254-5308, and 254-5309 (except for 236-8069)
ID: C33515T1
Grit
Pad Diameter
Pkg. Qty.
236-8069
36
178 mm (7 in)
25
Part No.
Grit
Pad Diameter
Pkg. Qty.
Back-up Pad
268-8709 1
16
25
254-5307
1U-6827
24
25
254-5307
1U-6828
36
25
254-5307
1U-6829
50
25
254-5307
1U-6830
60
25
254-5307
1U-6831
80
25
254-5307
1U-6832
100
25
254-5307
1U-6833
120
25
254-5307
1U-6834
24
127 mm (5 in)
25
254-5308
1U-6835
36
127 mm (5 in)
25
254-5308
1U-6836
50
127 mm (5 in)
25
254-5308
1U-6837
60
127 mm (5 in)
25
254-5308
1U-6838
80
127 mm (5 in)
25
254-5308
1U-6839
100
127 mm (5 in)
25
254-5308
1U-6840
120
127 mm (5 in)
25
254-5308
1U-6841
24
178 mm (7 in)
25
254-5309
1U-6842
36
178 mm (7 in)
25
254-5309
1U-6843
50
178 mm (7 in)
25
254-5309
1U-6844
60
178 mm (7 in)
25
254-5309
1U-6845
80
178 mm (7 in)
25
254-5309
1U-6846
100
178 mm (7 in)
25
254-5309
1U-6847
120
178 mm (7 in)
25
254-5309
1 268-8709
02a.qxp
10/5/06
1:26 PM
Page 13
Abrasive
Discs
Rib-flow backing pads allow air flow through the ribs extending disc life from 20 to 50%
Polymide construction with steel insert and arbor nut
Shipped in poly bag with 58-11 arbor flange nut
Available in three popular diameters
For use with angle grinders with a 58-11 spindle thread
254-5307 and 254-5308 will fit
Part No. Outside Diameter Max RPM Pkg. Qty. Used With1
141-6993 Electric Angle Grinder and
254-5309 will fit 222-3064
254-5307 114.3 mm (4.5 in)
13,000
1
1U-6827 Fiber Disc
or 222-3065 Pneumatic Angle Grinders
254-5308 127 mm (5 in)
11,900
1
1U-6834 Fiber Disc
254-5309
1
177.8 mm (7 in)
8,600
ID: D00577T1
Part No
Diameter
Grit
Pkg. Qty.
236-8072
50.8 mm (2 in)
24
50
236-8073
50.8 mm (2 in)
36
50
236-8074
50.8 mm (2 in)
50
50
236-8075
50.8 mm (2 in)
80
50
236-8076
50.8 mm (2 in)
120
50
236-8078
76.2 mm (3 in)
24
25
236-8079
76.2 mm (3 in)
36
25
236-8081
76.2 mm (3 in)
50
25
236-8082
76.2 mm (3 in)
80
25
236-8083
76.2 mm (3 in)
120
25
ID: D00803T1
Discs
Excellent for cleaning welds, removing tough coatings, carbon deposits, adhesives and rust
Conformable so there is less chance of under-cutting or gouging
Open web resists loading even from soft coatings and is non-metallic so it will not
contaminate the surface with metallic residues
Will work at low RPMs, such as on a 6.35 mm (14 in) drill @ 1750 RPM
Works well on other substrates such as wood, aluminum and even plastic
ID: C34433T1
Part No.
Pkg.
Qty.
4C-8637
4C-8638
Maximum
Operating Speed
Optimum
Operating Speed
Description
Diameter
8,000
8,000
Use with:
Straight Grinder
and Hand Drill
8,000
8,000
Straight Grinder
and Hand Drill
Shop Supplies
02a.qxp
10/5/06
1:26 PM
Page 14
Abrasive
Discs
Shop Supplies
262-9736
(5 in)
40
ID: D01167T1
Part No.
Grit
Description
Size
Dia x Hole
Pkg.
Qty.
4C-3809
36
50.8 mm (2 in)
50
4C-3810
50
50.8 mm (2 in)
50
4C-3811
60
50.8 mm (2 in)
50
4C-3813
100
50.8 mm (2 in)
50
4C-3817
80
76.2 mm (3 in)
50
4C-3819
60
101.6 mm (4 in)
50
4C-3821
100
101.6 mm (4 in)
50
4C-3822
120
101.6 mm (4 in)
50
4C-3824
80
127 mm (5 in)
100
4C-3834
80
25
ID: C44147T1
ID: D00809T1
Part No
Diameter
Grit
Pkg. Qty.
236-8039
127 mm (5 in)
A/O 60
100
236-8040
127 mm (5 in)
A/O 80
100
236-8041
127 mm (5 in)
A/O 100
100
236-8042
127 mm (5 in)
A/O 120
100
236-8043
127 mm (5 in)
A/O 150
100
236-8044
127 mm (5 in)
A/O 180
100
236-8045
127 mm (5 in)
A/O 220
100
236-8046
127 mm (5 in)
A/O 320
100
236-8047
127 mm (5 in)
A/O 400
100
236-8048
152.4 mm (6 in)
A/O 60
100
236-8049
152.4 mm (6 in)
A/O 80
100
236-8050
152.4 mm (6 in)
A/O 100
100
236-8051
152.4 mm (6 in)
A/O 120
100
236-8052
152.4 mm (6 in)
A/O 150
100
236-8053
152.4 mm (6 in)
A/O 180
100
236-8054
152.4 mm (6 in)
A/O 220
100
236-8055
152.4 mm (6 in)
A/O 320
100
236-8056
152.4 mm (6 in)
A/O 400
100
02a.qxp
10/5/06
1:26 PM
Page 15
Abrasive
Discs
Part No.
Size
Dia.
Shank
Pkg.
Qty.
4C-3837
50.8 mm (2 in)
4C-3838
76.2 mm (3 in)
127 mm (5 in)
5
16
4C-3840
ID: C44147T1
Shop Supplies
Part No.
Diameter
Grit
Pkg. Qty
281-8271
127 mm (5 in)
100
50
281-8272
127 mm (5 in)
180
50
281-8273
152.4 mm (6 in)
100
50
281-8274
152.4 mm (6 in)
180
50
281-8275
152.4 mm (6 in)
220
50
281-8282
203.2 mm (8 in)
80
50
ID: D00988T1
Part No.
Diameter
Thread
Size
Maximum
RPM
275-5264
127 mm (5 in)
5 -24
16
10,000
275-5265
152.4 mm (6 in)
5 -24
16
10,000
275-5266
203.2 mm (8 in)
5 -11
8
4800
ID: D01597T1
02a.qxp
10/5/06
1:26 PM
Page 16
Abrasive
Wheels
Wheels
Shop Supplies
Pkg.
Qty.
Wheel
Size
Hole
Size
Maximum
Operating Speed
Optimum
Operating Speed
Use With:
8T-7769
40
38.1 x 25.4 mm
(112 in x 1 in)
4.8 mm
(316 in)
18,000
16,000
ID: C33436T1
18,000
Package quantity
Use with
8T-7769
ID: C33437T1
Density
4,000
Mineral type
Number required
Color
Gray
Grade
Fine
6V-2032 Adapter
ID: C33443T1
Part No.
Pkg.
Qty.
Description
8T-7748
Wheel
Size
Hole
Size
Maximum
Operating Speed
Optimum
Operating Speed
203.2 x 25.4 mm
(8 in x 1 in)
76.2 mm
(3 in)
4,500
4,500
Use With:
Bench and
Stand Grinder
02a.qxp
10/5/06
1:26 PM
Page 17
Abrasive
Wheels
6V-2032 Adapter
Density
Mineral type
4,000
Color
Gray
Number required
Grade
Fine
Part No.
Pkg.
Qty.
Wheel
Size
Hole
Size
Maximum
Operating Speed
Optimum
Operating Speed
8T-7749
203.2 x 25.4 mm
(8 in x 1 in)
76.2 mm
(3 in)
4,500
4,500
Use With:
Bench and
Stand Grinder
ID: C33443T1
Shop Supplies
Size
Grade
Pkg. Qty.
4997, ZG
50
4997, ZG
50
4997, ZG
50
ID: D01461T1
Size
Type
262-9738
27
A24
15,000
ID: D01461T1
Density
Mineral type
Color
Tan
Letter color
Red
Grade
Fine
Part No.
Pkg.
Qty.
Wheel
Size
Hole
Size
Maximum
Operating Speed
Optimum
Operating Speed
Use With:
8T-7767
50
25.4 x 25.4 mm
(1 in x 1 in)
4.8 mm
(316 in)
35,100
22,000
Die Grinder
ID: C33520T1
22,000
Package quantity
ID: C33576T1
02a.qxp
10/5/06
1:26 PM
Page 18
Abrasive
Wheels
Mineral type
Color
Maroon
Grade
Fine
6V-2032 Adapter
Maximum operating speed
4,000
Number required
Part No.
Pkg.
Qty.
Wheel
Size
Hole
Size
Maximum
Operating Speed
Optimum
Operating Speed
6V-2033
203.2 x 50.8 mm
(8 in x 2 in)
76.2 mm
(3 in)
3,200
3,200
Typical Application
Bench Grinder, Stand
Grinders, Straight Grinders
Shop Supplies
ID: C33444T1
Flap Wheels
Flap wheels consist of a series of coated abrasive pieces (forming the
spokes of the wheel) which are mounted around a steel hub
Supplied with a 14 in-20 thread mandrel designed for fast mounting
Can be used on higher speed machines popular in todays market
Delivers smooth, chatter-free grinding
Use with portable and benchstand grinders
Type Material
5,500
Aluminum
4,000
Hardwood
5,000
Non-ferrous metals
5,000
Steel (alloy)
5,000
Steel (mild)
6,500
Steel (stainless)
Part No.
Pkg. Qty.
Size
Grit
4C-8511
10
1 in x 1 in
60
25,000
4C-8512
10
1 in x 1 in
120
25,000
4C-8513
10
1 in x 1 in
180
25,000
4C-8514
10
2 in x 1 in
60
20,000
4C-8515
10
2 in x 1 in
120
20,000
4C-8516
10
2 in x 1 in
180
20,000
4C-8517
10
3 in x 1 in
60
20,000
Part No.
Description
Size
4C-8518
10
3 in x 1 in
120
20,000
4C-8520
Adapter
1
4
inch x 1 inch
20,000
4C-8521
Adapter
1
4
inch x 4 inch
4C-8519
10
3 in x 1 in
180
Max. RPM
Optimum Surface
Feet per Minute
Speed
Adapters
Size
Grit
Max RPM
Pkg. Qty.
6 in x 1 in
120
6,000
ID: D00787T1
ID: D00583T1
Part No.
Size
Grade
Pkg. Qty.
254-5316
Coarse
254-5317
Medium
254-5318
Very Fine
254-5319
Coarse
254-5320
Very Fine
Abrasive
Wheels
ID: D00589T1
Pkg. Qty.
254-5321
60
10
254-5322
80
10
254-5323
120
10
254-5324
180
10
254-5325
240
10
254-5326
60
10
254-5327
80
10
254-5328
120
10
254-5329
180
10
254-5330
240
10
254-5331
60
10
254-5332
80
10
254-5333
120
10
254-5334
180
10
254-5335
240
10
Type
Grit Spec.
Max
RPM
ID: C33509T1
Wheel Size
OD x Thick x ID/Thread
Pkg.
Qty.
10
4C-3863
Std.
A24
6,600
4C-3773
Hi Perf.
Z/A241
8,500
4C-3774
Hi Perf.
Z/A241
8,500
4C-3776
Hi Perf.
Z/A241
6,600
Wheel Size
OD x Thick x ID/Thread
Pkg.
Qty.
1 Zirconia-Alumina
Type 27
Part No.
Type
Grit Spec.
Max
RPM
1U-6788
Std.
A24
15,300
10
1U-6789
Std.
A24
15,300
10
1U-6790
Std.
A24
13,300
10
1U-6791
Std.
A24
13,300
10
9U-6382
Std.
A24
12,220
1U-6792
Std.
A24
8,500
10
1U-6793
Std.
A24
8,500
10
1U-6794
Std.
A24
8,500
10
1U-6795
Std.
A24
6,600
10
1U-6796
Std.
A24
6,600
10
9U-6383
Hi Perf.
Z/A241
12,220
4C-3769
Hi Perf.
Z/A241
8,500
4C-3770
Hi Perf.
Z/A241
8,500
4C-3772
Hi Perf.
Z/A241
6,600
ID: C33508T1
Shop Supplies
Part No.
02a.qxp
10/5/06
1:26 PM
Page 20
Abrasive
Wheels
Part No
Size
Grade
Max RPM
Pkg. Qty.
A/O 24
10,000
Bulk
Shop Supplies
ID: D01461T1
Cut-Off Wheels
Fully reinforced cut-off wheels for heavy-duty
cut off jobs on ferrous metals
Wheels comply with ANSI Safety Code B-7.1
Use A60 for burr-free, cool cutting of metal
Use A36 for rough cutting applications
Offer quality at a competitive price
Part No.
Grit Spec.
Max
RPM
Wheel Size
OD x Thick x ID
Pkg.
Qty.
174-8900
A60
25,000
25
174-8901
A60
25,000
25
174-8902
A36
25,000
25
174-8903
A36
25,000
25
174-8904
A36
25,000
25
174-8905
A36
25,000
25
174-8906
A60
20,000
25
174-8907
A60
20,000
25
174-8908
A36
20,000
25
174-8909
A36
20,000
25
174-8910
A36
20,000
25
174-8911
A36
20,000
25
1U-6809
A36
5,100
25
1U-6810
A36
4,400
25
1U-6811
A24
3,000
10
ID: C33510T1
Grade
Max
RPM
Pkg.
Qty.
A60
17,902
Bulk
A60
12,223
Bulk
A60
10,186
Bulk
Part No
Size
ID: D00797T1
ID: D00797T1
Part No.
Description
Dimension
Pkg. Qty.
236-8038
Mandrel
Bulk
02a.qxp
10/5/06
1:26 PM
Page 21
Abrasive
Wheels
Part No.
4C-3766
4C-3768
1 Used
Grit Spec.
Wheel Size
OD x Thick x ID
Pkg.
Qty.
Shop Supplies
Part No.
Grit Spec.
Max
RPM
Wheel Size
OD x Thick x ID
Pkg.
Qty.
4C-3777
A36
27,120
10
4C-3864
A24
27,120
10
4C-3865
A36
18,080
10
ID: C41295T1
Part No.
Grit Spec.
Max
RPM
Wheel Size
OD x Thick x ID
Pkg.
Qty.
1U-6780
A36
4,140
1U-6781
A60
4,140
1U-6782
A36
4,140
1U-6783
A60
4,140
1U-6784
A36
3,600
1U-6786
A36
3,600
1U-6787
A60
3,600
1U-8285
A36
2,485
1U-8286
A60
2,485
1U-8289
A36
2,070
1U-8290
A60
2,070
ID: C34435T1
12.7 mm
(12 in)
15.88 mm
(58 in)
19 mm
(34 in)
25.4 mm
(1 in)
177.8 mm
(7 in)
25.4 mm
(1 in)
304.8 mm
(8 in)
25.4 mm
(1 in)
254 mm
(10 in)
31.75 mm
(114 in)
Diameter
Center Hole
152.4 mm
(6 in)
22.23 mm
(78 in)
25.4 mm
(1 in)
02a.qxp
10/5/06
1:26 PM
Page 22
Abrasive
Wheels / Miscellaneous
Grit Spec.
Max
RPM
Large OD/Small OD
x Thick x ID
Pkg.
Qty.
1U-6817
A16
9,075
10
1U-6818
A16
7,260
10
1U-6819
A16
6,000
ID: C33511T1
Shop Supplies
Miscellaneous
Abrasive Hand Pads
Every workplace has uses for non-woven nylon abrasive hand padswhenever surfaces must be conditioned or cleaned by hand
Used to clean surfaces or remove rust, oxides, paint discoloration, and other surface contaminants
Impart and blend cosmetic finishes on metal or highlight wood finishes
Hand deburr metals and plastics quickly and economically
Used with optional 4C-4175 Hand Pad Holder
Size: 152 x 229 mm (6 x 9 in)
Part No.
Description
Grade
Color
Pkg.Qty.
241-9512
Fine
Gray
20
8T-7751
Heavy-Duty Cleaning
Medium
Green
20
8T-7765
General Purpose
Medium
Maroon
20
8T-7752
Coarse
Black
20
262-9980
Heavy-Duty Aggresive
Extra Coarse
Tan
20
ID: D00613T1
Mineral type
Aluminum oxide
Color
Tan
Grade
Part No.
Pkg. Qty.
Size
Grade
Use With
1U-5514
51 mm x 9 m (2 in x 30 ft)
Very Fine
1U-5515
51 mm x 9 m (2 in x 30 ft)
Medium
1U-5512
25.4 mm x 9 m (1 in x 30 ft)
Very Fine
1U-5513
25.4 mm x 9 m (1 in x 30 ft)
Medium
Package quantity
ID: C44336T1
02a.qxp
10/5/06
1:26 PM
Page 23
Abrasive
Miscellaneous
Sheet size
Grit
4/0
Quantity
100 sheets/package
ID: D01467T1
ID: A92453T1
Dimensions
Package quantity
Shop Supplies
Pkg.
Qty.
Part No.
Grit
Size
Width x Length
Pkg.
Qty.
180J
25 mm x 45.7 m
(1 in x 50 yd)
4C-8523
120J
38.1 mm x 22.7 m
(112 in x 25 yd)
262-9737
320J
25 mm x 45.7 m
(1 in x 50 yd)
4C-8524
180J
38.1 mm x 22.7 m
(112 in x 25 yd)
262-9740
400J
25 mm x 45.7 m
(1 in x 50 yd)
1U-6849
80J
38.1 mm x 45.7 m
(112 in x 50 yd)
269-7255
80J
25 mm x 45.7 m
(1 in x 50 yd)
1U-6850
120J
38.1 mm x 45.7 m
(112 in x 50 yd)
269-7256
100J
25 mm x 45.7 m
(1 in x 50 yd)
1U-6851
180J
38.1 mm x 45.7 m
(112 in x 50 yd)
269-7257
120J
25 mm x 45.7 m
(1 in x 50 yd)
1U-6852
240J
38.1 mm x 45.7 m
(112 in x 50 yd)
269-7258
220J
25 mm x 45.7 m
(1 in x 50 yd)
1U-6853
320J
38.1 mm x 45.7 m
(112 in x 50 yd)
Part No.
Grit
262-9732
ID: C33516T1
Part No.
Grit
Size
Width x Length
Pkg.
Qty.
269-7259
280J
25 mm x 45.7 m
(1 in x 50 yd)
1U-8274
60J
50.8 mm x 45.7 m
(2 in x 50 yd)
1U-8278
180J
50.8 mm x 45.7 m
(2 in x 50 yd)
269-7260
500J
25 mm x 45.7 m
(1 in x 50 yd)
1U-8275
80J
50.8 mm x 45.7 m
(2 in x 50 yd)
1U-8279
240J
50.8 mm x 45.7 m
(2 in x 50 yd)
1U-6848
60J
38.1 mm x 45.7 m
(112 in x 50 yd)
1U-8276
100J
50.8 mm x 45.7 m
(2 in x 50 yd)
1U-8280
320J
50.8 mm x 45.7 m
(2 in x 50 yd)
4C-8522
80J
38.1 mm x 22.7 m
(112 in x 25 yd)
1U-8277
120J
50.8 mm x 45.7 m
(2 in x 50 yd)
262-9741
400J
50.8 mm x 45.7 m
(2 in x 50 yd)
Sheets
These sheets are used for sanding and metal surface preparation
Engineered for maximum economy, fast cutting and smoothing action
Excellent for scouring, deburring, scale and rust removal
ID: C33517T1
Pkg.
Qty.
Part No.
Grit
Abrasive
Size
1U-6854
60J
Aluminum Oxide
228.6 x 279.4 mm
(9 in x 11 in)
25
1U-6855
80J
Aluminum Oxide
228.6 x 279.4 mm
(9 in x 11 in)
25
1U-6856
120J
Aluminum Oxide
228.6 x 279.4 mm
(9 in x 11 in)
50
1U-6857
180J
Aluminum Oxide
228.6 x 279.4 mm
(9 in x 11 in)
50
1U-6858
240J
Aluminum Oxide
228.6 x 279.4 mm
(9 in x 11 in)
50
1U-6859
320J
Aluminum Oxide
228.6 x 279.4 mm
(9 in x 11 in)
50
1U-8281
400A
Silicon Carbide
228.6 x 279.4 mm
(9 in x 11 in)
50
1U-8282
500A
Silicon Carbide
228.6 x 279.4 mm
(9 in x 11 in)
50
1U-8283
600A
Silicon Carbide
228.6 x 279.4 mm
(9 in x 11 in)
50
4C-8510
Crocus
Ferrous Oxide
228.6 x 279.4 mm
(9 in x 11 in)
50
02a.qxp
10/5/06
1:26 PM
Page 24
Abrasive
Miscellaneous
Shop Supplies
Part No.
Pkg.
Qty.
Wheel
Size
Maximum
Operating Speed
Optimum
Operating Speed
6V-3044
12
25.4 mm x 165.1 cm
(1 in x 65 in)
6,500 SFPM
5,500 SFPM
Use With
ID: C33445T1
Abrasive
belt machinery
Sanding Belts
Used with any 7.62 x 53.34 cm (3 x 21 in) belt sander
Material: aluminum oxide with cloth back
Density
Color
Tan
Grade
Super fine
Part No.
Grade
262-9742
36 grit - coarse
262-9743
80 grit - medium
262-9744
262-9745
ID: D01455T1
Perfect choice for cleaning and polishing the inside diameters of pipe, tubing, cylinders and other interior spaces
Star shape allows the star tips to provide constant outward pressure on the walls to produce uniform and consistent results
Can be mounted singly or in multiples for efficient inside diameter cleaning and polishing operations
Adapter: 4C-8629 Mandrel
Part No.
Pkg.
Qty.
Maximum
Operating Speed
Optimum
Operating Speed
4C-8624
25
Use With:
38.1 mm
(112 in)
24,000
18,000
Straight-shaft Tools
4C-8625
25
50.8 mm
(2 in)
24,000
18,000
Straight-shaft Tools
4C-8626
10
76.2 mm
(3 in)
18,000
15,000
Straight-shaft Tools
4C-8627
10
101.6 mm
(4 in)
18,000
15,000
Straight-shaft
Tools
ID: C54853T1
4C-8628
10
114.3 mm
(412 in)
18,000
15,000
Straight-shaft Tools
Diameter
02a.qxp
10/5/06
1:26 PM
Page 25
Abrasive
Miscellaneous
Pkg.
Qty.
Engine
Bore Size
4C-6322
101.6 mm (4 in)
180
4C-6323
180
4C-6324
180
1U-9787
180
4C-6325
180
4C-6326
180
4C-6327
180
4C-6328
180
4C-6329
180
4C-6330
203.2 mm (8 in)
180
4C-6331
180
4C-6332
240
4C-6333
240
4C-6334
240
1U-7428
101.6 mm (4 in)
240
4C-6335
240
4C-6336
240
4C-6337
320
4C-6338
320
4C-6339
19 mm (34 in)
320
4C-6340
25.4 mm (1 in)
320
4C-6341
320
Grit
Mounted Points
Mounted wheels are used with horizontal or straight shaft, die and pencil grinders
on jobs where larger wheels will not fit
Offer maximum performance for grinding ferrous metals
Accurate spindles ensure precision grinding and minimize run-out
A-shaped wheels are for medium to heavy-duty blending and contouring
W-shaped wheels are for off-hand and precision grinding of medium to heavy stock
ID: C44148T1
Part No.
Shape
Grit Spec.
Size
Dia. x Length
Mandrel
Dia.
Pkg.
Qty.
1U-6820
A1
A36
25
1U-6821
A1
A60
25
1U-6822
A3
A36
25
1U-6823
A3
A60
25
4C-3845
A4
A60
25
4C-3846
A5
A36
25
1U-6824
A11
A36
25
1U-6825
A11
A60
25
4C-3849
A12
A36
25
4C-3850
A12
A60
25
6V-4802
A37
A60
25
1U-6826
A38
A60
25
4C-3852
A39
A60
19 mm x 19 mm (34 in x 34 in)
25
4C-3853
W220
A60
25
4C-3854
W235
A60
25
4C-3855
W236
A60
25
4C-3856
W237
A60
25
Shop Supplies
Part No.
02a.qxp
10/5/06
1:26 PM
Page 26
Abrasive
Miscellaneous
Shop Supplies
Type 16 with rounded tip for grinding mild contours or flat surfaces
Type 17 with square tip for beveling workpiece edges prior to welding
Type 18 square plugs for use on straight shaft grinders for work on flat surfaces
Type 18R also called pot balls, for work requiring straight sides and rounded tips
ID: C80473T1
Item
Part No.
Grit Spec.
Size
OD x Length x Thread
Pkg.
Qty.
Type 18
1U-6814
A24
10
Type 18R
1U-6815
A24
10
Type 16
1U-6812
A24
10
Type 18R
1U-6816
A24
10
Type 17
1U-6813
A24
10
Pkg.
Qty.
Shape
Shank
Egg
Ball
Carbide Burs
Pointed Tree
Cylindrical
Round Nose
Size
236-8097 9.53 mm x 19 mm
Part No
in x
3
4
in)
Round End
in)
Cylindrical
Cylindrical
Cylindrical
262-9746 6.35 mm x 19 mm
(38
(14
in x
Size
Shape
Pkg.
Qty.
Round Nose
Cylindrical
ID: C33518T1
Pkg.
Qty.
Part No.
Grit
Size
4C-3778
60
19 mm x 25.4 mm
(34 in x 1 in)
4C-3779
60
25.4 mm x 25.4 mm
(1 in x 1 in)
4C-3780
60
38.1 mm x 38.1 mm
(112 in x 112 in)
4C-3781
60
50.8 mm x 25.4 mm
(2 in x 1 in)
4C-3782
Mandrel 14 in
19 mm x 25.4 mm
(34 in x 1 in)
4C-3783
Mandrel 14 in
25.4 mm x 25.4 mm
(1 in x 1 in)
4C-3784
Mandrel 14 in
38.1 mm x 38.1 mm
(112 in x 112 in)
4C-3785
Mandrel 14 in
50.8 mm x 25.4 mm
(2 in x 1 in)
02a.qxp
10/5/06
1:26 PM
Page 27
Abrasive
Miscellaneous
4C-8522
4C-8523
4C-8524
Decal Remover
Part No.
Description
Package
Quantity
Diameter
Use with:
226-0125
101.6 mm x 9.53 mm
(4 in x 38 in)
226-0126
Retainer Roloc
and Holder
25.4 mm x 6.35 mm
(1 in x 14 in)
Shop Supplies
Fast and easy method to remove vinyl decals, graphics, tapes, films and adhesives
without damaging paint no fire danger because the discs are non combustible
Unique construction of the disc assures long life and allows easy
conformability to contours
Discs are flexible and have no sharp edges will not damage acrylic, enamel
or urethane paint. (not recommended for use on acrylic lacquer paints or plexiglass)
Faster and cleaner to use than solvent or chemical adhesive removers
RPM is critical for product performance maximum RPM is 4500;
recommended RPM is 3,000 to 4,000
ID: C62937T1
Industrial quality
Ideal for scraping paint and glass, cutting, and trimming
Fits all standard razor blade tools
Gauge: 0.009
Quantity: 5 per package/100 per carton
ID: D01323T1
Part No.
Description
263-9067
263-9069
263-9070
263-9071
263-9072
263-9074
263-9075
263-9076
ID: D00684T1
02a.qxp
10/5/06
1:26 PM
Page 28
Metal Cutting
Drills
Drills
The Shop Supplies and Tools Group has a comprehensive line of high quality drill bits. The product offering includes drills ranging from standard jobber
length, general purpose drills, to high quality, long lasting cobalt drills, 118 and 135 split point configurations.
Standard Drills
118 point
High quality M-7 steel
Straight shank jobber length
Applications
Shop Supplies
Mild steel
Cast iron
Size
1
16
in
5
64
in
1U-5591
3
32
in
1U-5592
7
64
in
1U-5593
1
8
1U-5589
1U-5590
in
9
64
in
1U-5595
5
32
in
1U-5596
11
1U-5594
64
1U-5597
3
16
1U-5598
13
1U-5599
7
32
1U-5600
15
1U-5601
Part No.
Size
Part No.
Size
1U-5589
16
in
1U-5598
13
1U-5607
11
32
in
1U-5590
64
in
1U-5599
7
32
1U-5608
23
64
in
1U-5591
32
in
1U-5600
15
1U-5609
3
8
1U-5592
64
in
1U-5601
1
4
in
1U-5610
25
64
in
1U-5593
8 in
1U-5602
17
64 in
1U-5611
13
32
in
1U-5594
64
in
1U-5603
9
32
in
1U-5612
27
64
in
1U-5595
32
in
1U-5604
19
64 in
1U-5613
7
16
1U-5596
11
64
1U-5605
5
16
1U-5614
29
64
in
1U-5597
1U-5606
21
1U-5615
15
32
in
1U-5616
31
64
in
1U-5617
1
2
in
64
in
16 in
in
64
in
in
64
in
in
64
in
in
64
1
4
in
Part No.
in
Size
Part No.
Size
Part No.
Size
1U-5586
1
64
in
1U-5597
1U-5606
21
64
in
1U-5587
1
32
in
1U-6699
.021 in
1U-5607
11
32
in
1U-5588
3
64
in
1U-5598
13
64
1U-5608
23
64
in
1U-5589
1
16
in
1U-5599
1U-5609
1U-5590
5
64
in
1U-5600
15
64
1U-5610
25
64
in
1U-5591
3
32
in
1U-5601
1U-5611
13
32
in
1U-5592
7
64
in
1U-5602
17
64
1U-5612
27
64
in
1U-5593
1
8
1U-5603
1U-5613
1U-5594
9
64
in
1U-6700
.290 in
1U-5614
29
64
in
1U-5595
5
32
in
1U-5604
19
64
1U-5615
15
32
in
1U-5596
11
1U-5605
1U-5616
31
64
in
1U-5617
in
64
in
16
32
in
in
in
in
in
32
16
in
in
in
in
Individual Drills
Part No.
Size
Part No.
Size
Part No.
Size
1U-7433
33
64
in
1U-5691
13
16
in
1U-5702
1532 in
1U-5682
17
32
in
1U-7436
53
64
in
1U-5703
1316 in
Applications
1U-5683
1U-5692
27
32
in
1U-5705
114 in
1U-7434
37
64
in
1U-5693
1U-5707
1516 in
1U-5684
19
32
in
1U-5694
29
32
in
1U-5709
138 in
1U-5685
1U-5695
15
16
in
1U-5711
1716 in
1U-5686
21
32
in
1U-5696
31
32
in
1U-5713
112 in
1U-5687
1116 in
1U-5697
1 in
1U-7437
1U-7435
45
64
in
1U-5698
1132 in
1916 in
(34 inch Shank)
1U-5688
23
32
in
1U-5699
1116 in
1U-7438
1U-5689
1U-5700
1332
11326 in
(34 inch Shank)
1U-5690
25
32
1U-5701
118 in
in
Part No.
in
Individual Drills
in
ID: C33398T1
in
16
in
in
in
in
8 in
in
in
16
in
in
02a.qxp
10/5/06
1:26 PM
Page 29
Metal Cutting
Drills
Self-centering point
More aggressive drill point can cut drill time by 50%
High quality M-7 steel
Straight shank jobber length
Applications
Drilling in alloy steels such as bolts
Mild steel
Cast iron
ID: C33399T1
Size
Part No.
Size
Part No.
Size
1U-5621
1U-5631
7
32
1U-5641
1U-5622
in
1U-5632
15
1U-5642
25
64
in
1U-5623
in
1U-5633
1
4
1U-5643
13
32
in
1U-5624
in
1U-5634
17
1U-5644
27
64
in
1U-5625
1U-5635
9
32
1U-5645
1U-5626
in
1U-5636
19
1U-5646
29
64
1U-5627
in
1U-5637
5
16
1U-5647
15
32
1U-5628
11
64
1U-5638
21
in
1U-5648
31
64
1U-5629
1U-5639
11
in
1U-5649
1U-5630
13
64
1U-5640
23
16
64
32
64
8
in
in
64
32
16
in
in
in
in
64
in
in
64
in
in
64
in
in
64
32
64
1
16
in
1U-5622
5
64
in
1U-5623
3
32
in
1U-5624
7
64
in
1U-5625
1
8
1U-5626
9
64
in
1U-5627
5
32
in
1U-5628
11
64
1U-5629
3
16
1U-5630
13
64
1U-5631
7
32
1U-5632
15
64
1U-5633
1
4
in
in
in
in
in
in
in
in
16
Size
1U-5621
Individual Drills
Part No.
Size
Part No.
Size
Part No.
Size
1U-5620
3
64
in
1U-5630
13
1U-5640
23
64
in
1U-5621
1
16
in
1U-5631
7
32
1U-5641
3
8
in
1U-5622
5
64
in
1U-5632
15
1U-5642
25
64
in
in
1U-5623
3
32
in
1U-5633
1
4
1U-5643
13
32
in
1U-5624
7
64
in
1U-5634
17
1U-5646
29
64
in
1U-5625
1
8
1U-5635
9
32
1U-5644
27
64
in
1U-5626
9
64
in
1U-5636
19
1U-5645
7
16
1U-5627
5
32
in
1U-5637
5
16
1U-5647
15
32
in
1U-5628
11
1U-5638
21
64
in
1U-5648
31
64
in
1U-5629
3
16
1U-5639
11
32 in
1U-5649
1
2
Part No.
Size
Part No.
Size
Part No.
Size
1U-5386
1
16
in
1U-5396
1U-5406
3
8
1U-5387
5
64
in
1U-5397
15
64
1U-5407
25
64
in
1U-5388
3
32
in
1U-5398
1U-5408
13
32
in
1U-5389
7
64
in
1U-5399
17
64
1U-5409
27
64
in
1U-5390
1
8
1U-5400
1U-5410
7
16
1U-5391
9
64
in
1U-5401
19
64
1U-5411
29
64
in
1U-5392
5
32
in
1U-5402
1U-5412
15
32
in
1U-5393
11
1U-5403
21
64
in
1U-5413
31
64
in
1U-5394
3
16
1U-5404
11
32
in
1U-5414
1
2
1U-5395
13
1U-5405
23
64
in
Part No.
Size
Part No.
Size
Part No.
Size
1U-5386
1
16
in
1U-5397
15
1U-5408
13
32
in
1U-5387
5
64
in
1U-5398
1
4
1U-5409
27
64
in
1U-5388
3
32
in
1U-5399
17
1U-5410
7
16
1U-5389
7
64
in
1U-5400
9
32
1U-5411
29
64
in
1U-5390
1
8
1U-5401
19
1U-5412
15
32
in
1U-5391
9
64
in
1U-5402
5
16
1U-5413
31
64
in
1U-5392
5
32
in
1U-5403
21
64
in
1U-5414
1
2
1U-5393
11
1U-5404
11
32
in
1U-8764
1U-5394
3
16
in
1U-5405
23
64
in
5 in
8
(12 inch
Shank)
1U-5395
13
64 in
1U-5406
3
8
1U-8765
1U-5396
7
32
1U-5407
25
3 in
4
(12 inch
Shank)
in
in
in
in
64 in
in
64
in
in
64
in
in
64
in
in
64
in
in
in
in
in
in
Size
1U-5386
1
16
in
1U-5387
5
64
in
1U-5388
3
32
in
1U-5389
7
64
in
Applications
1U-5390
1
8
1U-5391
9
64
in
1U-5392
5
32
in
ID: C33400T1
in
1U-5393
11
1U-5394
3
16
1U-5395
13
1U-5396
7
32
1U-5397
15
1U-5398
1
4
64
in
in
64
in
in
64
in
in
64
in
32
in
in
in
32
in
in
in
16 in
in
in
in
in
64
in
in
Individual Drills
in
64
in
in
64
in
in
64
in
in
64
in
in
in
64
in
in
in
Shop Supplies
Part No.
02a.qxp
10/5/06
1:26 PM
Page 30
Metal Cutting
Drills
Aircraft Drills
Size
Part No.
Size
4C-4411
in
4C-4419
4C-4412
in
4C-4420
11
32
4C-4413
4C-4421
4C-4414
in
4C-4422
13
32
Applications
4C-4415
16 in
4C-4423
4C-4416
4C-4424
15
32
4C-4417
4C-4425
Drill, 12 in
4C-4418
Shop Supplies
ID: C41288T1
16
32
8
in
32
32
4
in
in
32
16
in
in
in
16
in
in
in
in
Part No.
Size
Part No.
Size
Part No.
Size
4C-3335
1
16
in
4C-3346
13
4C-3357
13
32
in
4C-3336
5
64
in
4C-3347
1
4
4C-3358
27
64
in
4C-3337
3
32
in
4C-3348
17
4C-3359
4C-3338
7
64
in
4C-3349
9
32
in
4C-3360
28
64
in
4C-3339
1
8
4C-3350
19
64 in
4C-3361
15
32
in
4C-3340
9
64
in
4C-3351
5
16
4C-3362
31
64
in
4C-3341
5
32
in
4C-3352
21
in
4C-3363
4C-3342
11
4C-3353
11
in
4C-3343
3
16
4C-3354
23
4C-3344
13
4C-3355
3
8
4C-3345
7
32
4C-3356
25
in
64
in
in
64
in
in
64
in
in
64
in
in
64
32
64
in
in
64
in
118 point
High quality M-7 steel
Black fnish
Wide range of diameters
1 mm to 12.5 mm
Straight shank
Part No.
Size
Part No.
Size
Part No.
Size
Part No.
Size
1U-8121
1.00 mm
1U-8136
2.80 mm
1U-8151
5.00 mm
1U-8166
9.00 mm
1U-8122
1.20 mm
1U-8137
2.90 mm
1U-8152
5.20 mm
1U-8167
9.50 mm
1U-8123
1.35 mm
1U-8138
3.00 mm
1U-8153
5.50 mm
1U-8168
10.00 mm
1U-8124
1.50 mm
1U-8139
3.20 mm
1U-8154
5.60 mm
1U-6865
1U-8125
1.70 mm
1U-8140
3.40 mm
1U-8155
5.80 mm
10.00 mm
(Premium Grade Steel)
1U-8126
1.80 mm
1U-8141
3.50 mm
1U-8156
6.00 mm
1U-8169
10.50 mm
11.00 mm
1U-8127
1.90 mm
1U-8142
3.60 mm
1U-8157
6.50 mm
1U-8170
1U-8128
2.00 mm
1U-8143
3.90 mm
1U-8158
6.80 mm
1U-8171
11.50 mm
1U-8129
2.10 mm
1U-8144
4.00 mm
1U-8159
7.00 mm
1U-8172
12.00 mm
1U-6866
12.00 mm
(Premium Grade Steel)
1U-8173
12.20 mm
1U-8174
12.50 mm
1U-8130
2.20 mm
1U-8145
4.10 mm
1U-8160
7.50 mm
1U-8131
2.30 mm
1U-8146
4.30 mm
1U-8161
8.00 mm
1U-8132
2.40 mm
1U-8147
4.50 mm
1U-8162
8.20 mm
1U-8133
2.50 mm
1U-8148
4.60 mm
1U-8163
8.50 mm
1U-8134
2.60 mm
1U-8149
4.70 mm
1U-8164
8.60 mm
1U-8135
2.70 mm
1U-8150
4.80 mm
1U-8165
8.70 mm
Empty drill index for storing 29 different sizes of jobber length drill bits from
1 inch to 1 inch in 1 inch increments
16
2
64
Typical use: left hand drills
Drill Dia.
Needed
Part No.
Used
Thread
Size
Drill Dia.
Needed
Part No.
Used
Thread
Size
Drill Dia.
Needed
Part No.
Used
M1.6
1.35 mm
1U-8123
M5
4.30 mm
1U-8146
M14
12.20 mm
1U-8173
M2
1.70 mm
1U-8125
M6
5.20 mm
1U-8152
M20
18.00 mm
1U-8184
M2.5
2.20 mm
1U-8130
M8
7.00 mm
1U-8159
M24
21.50 mm
1U-8190
8.70 mm
1U-8165
M27
23 mm
214-3634
10.50 mm
1U-8169
M30
27.00 mm
1U-8194
M36
32.50 mm
1U-8201
M3
2.60 mm
1U-8134
M10
M4
3.40 mm
1U-8140
M12
16
in
in
02a.qxp
10/5/06
1:26 PM
Page 31
Metal Cutting
PD
Pitch Diameters
NC
D5
NS
D7
H1
D9
H2
NPT
H3
NPTT
Hand Taps
Machine Screws
Machine Screw Sizes Individual
Part Numbers
Nominal
Size
Threads
Per Inch
Pitch Dia.
Limits
No. of
Flutes
Taper
Plug
Bottoming
Thread
Length
80 NF
H1
1P-3001
16
64 NC
H1
1P-3002
in
11116 in
72 NF
H1
1P-3003
in
11116 in
16
in
Overall
Length
158 in
56 NC
H2
1P-3004
64 NF
H2
1P-3005
16 in
48 NC
H2
1P-3006
in
11316 in
56 NF
H2
1P-3007
in
11316 in
16
in
134 in
134 in
40 NC
H2
4C-5008
1P-3008
4C-5015
48 NF
H2
1P-3009
16 in
40 NC
H2
1P-3010
in
11516 in
44 NF
H2
1P-3011
in
11516 in
in
in
in
178 in
178 in
32 NC
H3
4C-5009
1P-3012
4C-5016
11
16
40 NF
H2
1P-3013
11
16
32 NC
H3
4C-5010
1P-3014
4C-5017
in
218 in
36 NF
H2
1P-3015
in
218 in
in
238 in
8 in
238 in
2 in
2 in
10
24 NC
H3
4C-5011
1P-3016
4C-5018
10
32 NF
H3
4C-5012
1P-3017
4C-5019
12
24 NC
H3
4C-5013
1P-3018
4C-5020
15
16
in
238 in
12
28 NC
H3
4C-5014
1P-3019
4C-5021
15
16
in
238 in
ID: C07893T1
Shop Supplies
02a.qxp
10/5/06
1:26 PM
Page 32
Metal Cutting
Shop Supplies
Part Numbers
Nominal
Size (inch)
Threads
Per Inch
Pitch Dia.
Limits
No. of
Flutes
Taper
Plug
Bottoming
Thread
Length
Overall
Length
20 NC
28 NF
H3
H3
4
4
4C-4989
4C-4990
1P-3021
1P-3022
4C-4971
4C-4972
1 in
1 in
212 in
212 in
16
16
18 NC
24 NF
H3
H3
4
4
4C-4991
4C-4992
1P-3023
1P-3024
4C-4973
4C-4974
118 in
118 in
22332 in
22332 in
16 NC
24 NF
H3
H3
4
4
4C-4993
4C-4994
1P-3025
1P-3026
4C-4975
4C-4976
114 in
114 in
21516 in
21516 in
16
16
14 NC
20 NF
H3
H3
4
4
4C-4995
4C-4996
1P-3027
1P-3028
4C-4977
4C-4978
1716 in
1716 in
3532 in
3532 in
13 NC
20 NF
H3
H3
4
4
4C-4997
4C-4998
1P-3029
1P-3030
4C-4979
4C-4980
12132 in
12132 in
338 in
338 in
16
12132 in
31932 in
16
H3
1P-3031
2B-9256
1P-3032
16
12 NC
14NF
18 NF
H3
12132 in
31932 in
11 NC
18 NF
H3
H3
4
4
4C-4999
4C-5000
1P-3033
1P-3034
4C-4981
4C-4982
11316 in
11316 in
31316 in
31316 in
10 NC
12 NF
16 NF
H3
4C-5001
4C-4983
2 in
414 in
H3
4C-5002
1P-3035
2B-2526
1P-3036
4C-4984
2 in
414 in
9 NC
14 NF
H4
H4
4
4
4C-5003
4C-5004
1P-3037
1P-3038
4C-4985
4C-4986
2732 in
2732 in
41116 in
41116 in
1
1
1
8 NC
12 NF
14 NF
H4
H4
H4
4
4
4
4C-5005
4C-5006
4C-5007
1P-3039
1P-3040
1P-7421
4C-4987
4C-4988
5P-3011
212 in
212 in
212 in
518 in
518 in
518 in
1116
12 NF
H4
1U-6539
212 in
518 in
118
118
7 NC
12 NF
H4
4
4
1U-9707
1P-3041
5P-3012
212 in
2916 in
5.4 in
5716 in
114
114
7 NC
12 NF
H4
4C-5051
1P-3042
2916 in
534 in
1516
138
12 NF
6 NC
H4
1U-6540
1U-9709
2916 in
534 in
138
112
12 NF
12 NF
H4
H4
6
6
1P-3043
1P-3044
5P-3013
3 in
3 in
6116 in
638 in
12 NC
H6
199-3947 1
3 in
7 in
212
1 For
ID: B00047T1
Threads
Per Inch
Nominal
Size (inch)
Threads
Per Inch
4
4
20 NC
28 NF
12 NC
18 NF
16
16
18 NC
24 NF
5
3
8
8
16 NC
24 NF
3
7
16
16
14 NC
20 NF
9 NC
14 NF
13 NC
20 NF
1
1
8 NC
14 NC
16
16
8
8
4
4
8
8
11 NC
18 NF
10 NC
16 NF
ID: C07900T1
Nominal
Size (inch)
Threads
Per Inch
1
4
1
4
20 NC
28 NF
5
16
5
16
18 NC
24 NF
3
8
3
8
16 NC
24 NF
7
16
7
16
14 NC
20 NF
1
2
1
2
13 NC
20 NF
02a.qxp
10/5/06
1:26 PM
Page 33
Metal Cutting
Rethreading Dies
Caterpillar offers three types of rethreading dies,
available by individual part number and in sets (indexes).
- Hexagon and square rethreading fractional dies
- Hexagon rethreading metric dies
- Hexagon rethreading pipe dies
Used to clean-up existing thread not recommended to cut new threads
Made of conventional carbon steel (unless otherwise specified)
Conform to industry standards
Threads
Per Inch
Part
No.
Dimensions
Across Flat
Thickness
1
4
20 NC
28 NF
1P-2979
1P-2980
19
32
in
1
4
5
16
18 NC
24 NF
1P-2981
1P-2982
11
16
in
5
16
3
8
16 NC
24 NF
1P-2983
1P-2984
25
32
in
3
8
7
16
14 NC
20 NF
1P-2985
1P-2986
7
8
in
7
16
1
2
13 NC
20 NF
1P-2987
1P-2988
1116 in
1
2
in
9
16
12 NC
18 NF
1P-2989
1P-2990
1116 in
1
2
in
5
8
11 NC
18 NF
1P-2991
1P-2992
114 in
5
8
in
3
4
10 NC
16 NF
1P-2993
1P-2994
1716 in
3
4
in
7
8
9 NC
14 NF
1P-2995
1P-2996
158 in
7
8
in
8 NC
14 NS
1P-2997
3P-2213
1P-2999 Case
11316 in
1 in
ID: 75999-1T1
Nominal
Size and
Pitch
Part
No.
Dimensions
Across
Flat
Thickness
M6 x 1.00
8T-3064
19
32
in
M8 x 1.25
8T-3066
11
16
in
Part
No.
M6 x 1.00
8T-3064
19
32
in
M8 x 1.25
8T-3066
11
16
in
in
M10 x 1.50
8T-3070
in
M10 x 1.50
8T-3070
in
in
M12 x 1.75
8T-3074
1116 in
in
M12 x 1.75
8T-3074
1116 in
M14 x 2.00
4C-4961
1116 in
in
M14 x 2.00
4C-4961
1116
in
M16 x 1.00
4C-4181
11
in
in
M16 x 2.00
8T-3078
114 in
in
M16 x 2.00
8T-3078
114 in
in
M20 x 2.50
4C-4962
158 in
in
M20 x 2.50
4C-4962
158 in
in
M16 x 1.00
4C-4182
114 in
M30 x 3.50
4C-6722
2316 in
1 in
in
16
16
in
2
2
8
8
in
16
16
2
8
8
8
in
Threads
No.
Dimensions
Part Flat
Across
Thickness
27
4C-4957
1116 in
3
8
in
18
4C-4958
114 in
5
8
in
18
4C-4959
1716 in
5
8
in
14
4C-4960
158 in
3
4
in
Nominal
Size (inch)
Threads
Per Inch
Part
No.
Dimensions
Across Flat
Thickness
Nominal
Size (inch)
Threads
Per Inch
Part
No.
Dimensions
Across Flat
Thickness
20 NC
28 NF
1P-2979
1P-2980
19
32
in
114
12 NF
4C-5495
2316 in
1 in
138
12 NF
4C-5496
238 in
1 in
16
18 NC
24 NF
1P-2981
1P-2982
11
16
in
112
12 NF
4C-5497
2916 in
1 in
16 NC
24 NF
1P-2983
1P-2984
25
32
in
134
5 NF
16
14 NC
20 NF
1P-2985
1P-2986
in
in
16
in
in
16
in
13 NC
20 NF
1P-2987
1P-2988
1116 in
in
16
12 NC
18 NF
1P-2989
1P-2990
1116 in
in
11 NC
18 NF
1P-2991
1P-2992
114
10 NC
16 NF
1P-2993
1P-2994
1716 in
9 NC
14 NF
1P-2995
1P-2996
158 in
8 NC
12 NF
14 NS
1P-2997
1P-2998
3P-2213
11316 in
1 in
12 NF
4C-5494
2 in
5
3
7
118
in
in
in
in
in
in
ID: C41329T1
in
in
16
in
Dimensions
Across
Flat
Thickness
Nominal
Size (inch)
in
Shop Supplies
Nominal
Size (inch)
114 in
5P-4238
3 in
M4 x 0.70
8T-3062
19
32
in
1
4
in
M5 x 0.80
8T-3063
19
32
in
1
4
in
M7 x 1.00
8T-3065
11
16
in
5
16
M9 x 1.00
8T-3067
25
32
in
3
8
in
M9 x 1.25
8T-3068
25
32
in
3
8
in
M10 x 1.25
8T-3069
7
8
in
7
16
in
M11 x 1.50
8T-3071
7
8
in
7
16
in
M12 x 1.25
8T-3072
1116 in
1
2
in
M12 x 1.50
8T-3073
1116 in
1
2
in
M13 x 1.50
8T-3075
1116 in
1
2
in
M14 x 1.50
9F-9398
M15 x 1.50
8T-3076
114 in
5
8
M16 x 1.00
4C-4182
114 in
7
16
M16 x 1.50
8T-3077
114 in
5
8
in
in
in
in
1 in
02a.qxp
10/5/06
1:26 PM
Page 34
Metal Cutting
Part No.
OTC
No.
Per
Capacity
Description
Weight
1U-7521
7402
4, 5, 6, 7, 712, 8, 9, 10,
11, 1112, 12, 14, 16, 18, 20, 24
1.36 kg (3 lbs)
1U-7610
202817
.45 kg (1 lb)
Shop Supplies
ID: C54852T1
Used to renew damaged external threads on any diameter shaft (right or left handed)
Cross-cut and thread proportional to thread pitch (helps eliminate file skipping
or jumping out of fine pitches)
Each file has eight separate pitches
Makes thread repairs without using a thread die
Red plastic handle protects hands
Each file is individually packaged in a plastic tube
Carrying pouch keeps files together
Files can also be ordered separately
3
2
Reference
RENR1113 Service Manual, 312B Excavators Machine Systems Disassembly and Assembly
SENR6139 Service Manual, 311 and 312 Excavators Machine Systems Disassembly and Assembly
Item
Part No.
Description
Pitch
154-9316
154-9317
154-9318
154-9319
2
3
Plastic handle
160-1749
Roll-up Pouch
Part No.
Size
9F-9397
24 mm x 1.5 mm Pitch
9F-9398
14 mm x 1.5 mm Pitch
1P-2998
1 in-12 UNF
5P-4238
134 in-5 NC
6V-7052
1516 in-12 NF
ID: C07916T1
02a.qxp
10/5/06
1:26 PM
Page 35
Metal Cutting
Threads
Per Inch
No. of
Flutes
Thread
Length
Overall
Length
16
27
27
4C-9747
2P-5531
in
18
2P-5532
1116 in
Part No.
18
2P-5533
1116 in
14
2P-5534
138 in
14
214-3635
138 in
NOTE: These are ground thread taps meeting requirements of right hand American
Standard Pipe Form (NPT) and American Standard Dryseal Pipe Form (NPTF). Dryseal taps
are used to tap fittings which will give a pressure tight joint without use of a sealer.
Pitch Dia.
Limits
No. of
Flutes
M4 x 0.7
8T-3079
M5 x 0.8
D4
8T-3080
M6 x 1
D5
8T-3081
M7 x 1.0
M8 x 1.25
D5
M9 x 1.0
M9 x 1.25
Part Numbers
Overall
Length inch
Nominal
Size
Pitch Dia.
Limits
No. of
Flutes
Plug
Bottoming
Overall
Length inch
M15 x 1.50
8T-3094
2.375 in
M16 x 1.50
8T-3095
2.50 in
M16 x 2
D6
4C-9645 2
8.00 in
8T-3082
M16 x 2
D7
8T-3096
3.81 in
8T-3083
2.72 in
M18 x 1.5
D6
9U-7283
4.03 in
8T-3084
M18 x 2.5
D7
4C-4966
4.03 in
8T-3085
M20 x 1.5
D7
9U-5794 1
4.47 in
M10 x 1
D6
4C-5894
3.16 in
M20 x 2.5
D7
4C-4967
4.47 in
M10 x 1.25
8T-3086
M22 x 1.5
D6
156-8166
4.69 in
M10 x 1.50
D6
8T-3087
3.16 in
M24 x 3.0
D8
4C-4968
4.91 in
M11 x 1.50
8T-3088
M30 x 3.5
D9
4C-4969
5.44 in
M12 x 1.25
8T-3089
M36 x 4
D9
4C-4970
6.06 in
M12 x 1.50
8T-3090
M42 x 4.5
D5
4 or 6
9U-6901
5.91 in
M12 x 1.75
D6
8T-3091
3.38 in
M48 x 5
D5
9U-6503
7.62 in
M13 x 1.50
8T-3092
M64 x 6.0
D5
4 or 6
9U-6902
8.74 in
Plug
Bottoming
M14 x 1
D7
4C-6924
3.59 in
1 Used
M14 x 1.50
8T-3093
2 Used
M14 x 2
D7
4C-4965
3.59 in
Part No.
Size
6V-2091
3
8
9F-9396
24 mm-1.5 mm
inch-16 Spiralock
7S-7093
7
8
5P-3012
inch-12 UN
1P-7422
2 inch-12 UN
1U-6600
1U-9708
1U-6725
1U-6726
Shop Supplies
ID: C07889T1
02a.qxp
10/5/06
1:26 PM
Page 36
Metal Cutting
Tap Wrenches
Caterpillar offers two types of tap wrenches:
- T-Handle
- Straight
Designed for use in hand tapping but can also be used with reamers, drills, screw extractor
or other hand cutting tools
Jaws are made of carefully hardened and tempered steel
Ruggedly built yet nicely furnished
Shop Supplies
ID: C54429T1
Description/Usage
Part No.
Use With:
Fractional
Taps
Length
Machine
Screw Taps
Metric
Taps
1 in - 1 in
Slip Handle
4C-5026
69.85 mm (2.75 in)
0-14
1 - 6 mm
16
4
The T-Handle may be slipped from side to side to permit a complete turn in close quarters.
1 in - 1 in
Plain Handle
4C-5027
69.85 mm (2.75 in)
0-14
16
4
An all purpose wrench with fixed handle. Ideal for ordinary out in the open tapping jobs.
1 - 6 mm
Long Shank
4C-5028
222.25 mm (8.75 in) 116 in - 14 in
0-14
1 - 6 mm
The long shank permits tapping in hard to get at places encountered in machine and automobile repair work.
1 in - 1 in
Ratchet
4C-5029
95.25 mm (3.75 in)
0-14
1 - 6 mm
16
4
The combination of ratchet and slip handle make this an all around wrench capable of handling most hand
tapping jobs.
ID: C54430T1
Description/Usage
Part No.
Length
Use With:
Fractional
Taps
Machine
Screw Taps
Pipe
Taps
Metric
Taps
5 in - 1 in
1
1P-3047
279.40 mm (11 in)
7-14
4 - 13 mm
32
2
8
1 in - 11 in
1 - 3
6 - 24 mm
1P-3048
482.60 mm (19 in)
4
8
8
4
These wrenches have solid handles, one of which is forged integral with the center. Adjustment is made by turning the movable handle.
Solid Handle
02a.qxp
10/5/06
1:26 PM
Page 37
Metal Cutting
Thread Inserts
Thread Inserts
Screw Thread Inserts
The Shop Supplies and Tools Group offers two different types of screw thread inserts. Both are used to repair damaged threads and can save money and speed up repairs.
Keenserts are:
Heli-Coil Inserts
Effective and universally accepted method of thread repair
Quickly and permanently restore stripped, worn or damaged threads to their original size and condition
Inserts work in any material: aluminum, magnesium, cast iron, bronze, etc
Increasing use of lightweight (and soft) materials means more thread damage there is a Heli-Coil repair for virtually every application
Shop Supplies
Reference
For detailed information on Heli-Coil Inserts order NEHP5567,
Screw Thread Inserts for Maintenance, Repair and Overhaul.
ID: C79650T1
ID: C44051T1
Both sets contain repairs for the most commonly used thread sizes
Two Master Sets for inch sizes are available: one for Inch Coarse (4C-8364) and one for Inch Fine (4C-8365)
The coarse set contains six sizes: 14 inch, 516 inch, 38 inch, 716 inch, 12 inch and 58 inch
The fine set has six sizes: #10, 14 inch 516 inch,38 inch, 716 inch and 12 inch
Each set has a drill, tap, installation tool, a quantity of inserts for each size, and complete instructions
NOTE: Installation tools, prewinder and mandrel included in Fine Series only.
ID: C44052T1
Insert
Pkg.
Part No.
Insert
Qty.
Tap
Part No.
Drill
Size
Installation
Tool Part No.
Thread
Size and Length
Insert
Pkg.
Part No.
Insert
Qty.
Tap
Part No.
Drill
Size
Installation
Tool Part No.
in-20 x .375 in
4C-8419
12
4C-9681
17
64
in
8T-2692
10-32 x .285 in
4C-8433
12
4C-9687
13
64
in
8T-2727
16 in-18 x .469 in
4C-8420
12
4C-9682
21
64
in
8T-2695
4C-8434
12
4C-9688
17
64
in
8T-2730
in-16 x .562 in
4C-8421
12
4C-9683
25
64
in
8T-2698
4C-8435
12
4C-9689
21
64
in
8T-2733
16
4C-8422
4C-9684
29
64
in
8T-2703
4C-8436
12
4C-9690
25
64
in
8T-2736
in-13 x .750 in
4C-8423
4C-9685
17
32
in
8T-2706
4C-8437
4C-9691
29
64
in
8T-2739
in-11 x.938 in
4C-8425
4C-9686
21
32
in
6V-9083
4C-8438
4C-9692
33
64
in
8T-2742
in-14 x .656 in
4 in-28 x .375 in
16
8
in-24 x .562 in
16
2
in-24 x .469 in
in-20 x .656 in
in-20 x .750 in
02a.qxp
10/5/06
1:26 PM
Page 38
Metal Cutting
Thread Inserts
Kit
Part No.
Inserts
per Kit
Tap
Part No.
Installation
Tool
Part No.
Insert Pkg.
Part No.
Insert
Qty.
Drill
Size
Drill
Part No.
1 -20
4
4C-8368
24
4C-9681
8T-2692
4C-8419
12
17
64
1U-5634
4C-8369
24
4C-9682
8T-2695
4C-8420
12
21
64
1U-5638
4C-8370
12
4C-9683
8T-2698
4C-8421
12
25
64
1U-5642
4C-8371
12
4C-9684
8T-2703
4C-8422
29
64
1U-5646
4C-8372
12
4C-9685
8T-2706
4C-8423
17
32
1U-5682
x .844
4C-8373
4C-9700
8T-2709
4C-8424
19
32
1U-5684
5 -11
8
x .9381
4C-8374
4C-9686
6V-9083
4C-8425
21
32
1U-5686
3 -10
4
x 1.125
4C-8375
4C-9725
6V-9081
4C-8426
25
32
1U-5690
4C-8376
4C-9724
8T-2712
4C-8427
29
32
1U-5694
1-8 x 1.500
4C-8377
4C-9723
8T-2715
4C-8428
1132
1U-5698
118-7 x 1.688
4C-8378
4C-9722
8T-2718
4C-8429
1532
1U-5702
114-7 x 1.875
4C-8379
4C-9721
8T-2721
4C-8430
1932
1U-5706
138-6 x 2.062
4C-8380
4C-8468
4C-8485
4C-8431
11332
1U-5710
112-6 x 2.250
4C-8381
4C-9720
8T-2724
4C-8432
11732
1U-5704
x .3751
5 -18
16
3 -16
8
x .5621
7 -14
16
1 -13
2
Shop Supplies
x .6561
x .7501
9 -12
16
7 -9
8
.4691
x 1.312
1 Also
Kit
Part No.
Inserts
per Kit
Tap
Part No.
Installation
Tool
Part No.
Insert Pkg.
Part No.
Insert
Qty.
Drill
Size
Drill
Part No.
10-32 x .2851
4C-8382
24
4C-9687
8T-2727
4C-8433
12
13
64
1U-5630
4C-8383
24
4C-9688
8T-2730
4C-8434
12
17
64
1U-5634
4C-8384
24
4C-9689
8T-2733
4C-8435
12
21
64
1U-5638
4C-8385
12
4C-9690
8T-2736
4C-8436
12
25
64
1U-5642
4C-8386
12
4C-9691
8T-2739
4C-8437
29
64
1U-5646
4C-8387
12
4C-9692
8T-2742
4C-8438
33
64
1U-7433
4C-8388
4C-8469
4C-8486
4C-8497
37
64
1U-7434
4-28
x .3751
16-24
8-24
x .4691
x .5621
16-20
x .6561
x .7501
x .844
2-20
16-18
x .938
4C-8389
4C-9701
8T-2745
4C-8439
41
64
4C-8480
x 1.125
4C-8390
4C-9702
6V-9082
4C-8440
49
64
4C-8481
x 1.312
4C-8391
4C-9703
8T-2748
4C-8441
57
64
4C-8482
1-14 x 1.500
4C-8392
4C-9704
8T-2751
4C-8442
1164
4C-8483
1-12 x 1.500
4C-8393
4C-8470
4C-8487
4C-8443
1164
4C-8483
118-12 x 1.688
4C-8394
4C-9706
8T-2754
4C-8444
1532
1U-5702
114-12 x 1.875
4C-8395
4C-9707
8T-2757
4C-8445
1932
1U-5706
138-12 x 2.062
4C-8396
4C-8471
4C-8488
4C-8446
11332
1U-5710
112-12 x 2.250
4C-8397
4C-9709
8T-2760
4C-8447
11732
1U-5704
8-18
4-16
8-14
1 Also
Thread
Size and Length
Insert
Pkg.
Part No.
Insert
Qty.
Tap
Part No.
Drill
Size
Installation
Tool Part No.
M5 x 0.8 7.5
4C-8448
12
4C-9727
13
8T-3121
M6 x 1 9.0
4C-8449
12
4C-9728
1
4
8T-2784
M8 x 1.25 12.0
4C-8451
12
4C-8475
21
64
8T-2790
4C-8452
12
4C-9730
13
32
8T-2793
64
02a.qxp
10/5/06
1:26 PM
Page 39
Metal Cutting
Thread Inserts
Thread
Size and Length
Insert
Pkg.
Part No.
Insert
Qty.
Tap
Part No.
Drill
Size
Installation
Tool Part No.
M5 x 0.8 7.5
4C-8448
12
4C-9727
13
64
8T-3121
M6 x 1 9.0
4C-8449
12
4C-9728
8T-2784
M8 x 1.25 12.0
4C-8451
12
4C-8475
21
64
8T-2790
4C-8410
12
4C-9715
13
32
8T-2763
Kits include insert, tap, installation tool, tang break-off tool, and drill
Tang break-off tool included in M5 through M12 only
Kit Contents and Replacement Part Numbers
Kit
Part No.
Inserts
per Kit
Tap
Part No.
Installation
Tool
Part No.
Drill
Size
Drill
Part No.
M5 x 0.81 2 7.5
4C-8398
12
4C-9727
8T-3121
4C-8448
12
13
1U-5630
M6 x 11 2 9.0
4C-8399
12
4C-9728
8T-2784
4C-8449
12
1
4
1U-5633
M7 x 1 10.5
4C-8400
12
4C-9705
8T-2787
4C-8450
12
9
32
1U-5635
M8 x 1.251 2 12.0
4C-8401
12
4C-8475
8T-2790
4C-8451
12
21
64
1U-5638
4C-8402
12
4C-9730
8T-2793
4C-8452
12
13
32
1U-5643
4C-8403
12
4C-9731
8T-2796
4C-8453
15
32
1U-5647
M14 x 2 21.0
4C-8404
12
4C-8472
4C-8489
4C-8454
37
64
1U-7434
M16 x 2 24.0
4C-8405
4C-9732
8T-2799
4C-8455
21
32
1U-5686
4C-8406
4C-8473
4C-8490
4C-8456
47
64
4C-8407
4C-8474
4C-8491
4C-8457
13
16
1U-5691
1 Also
2 Also
64
Kit
Part No.
Inserts
per Kit
Tap
Part No.
Installation
Tool
Part No.
Drill
Size
Drill
Part No.
M8 x 1 12.0
4C-8408
12
4C-9729
4C-8492
4C-8458
12
21
64
1U-5638
M10 x 1 15.0
4C-8409
12
4C-8476
4C-8493
4C-8459
12
13
32
1U-5643
4C-8410
12
4C-9715
8T-2763
4C-8460
12
13
32
1U-5643
4C-8411
12
4C-9716
8T-2766
4C-8461
15
32
1U-5647
4C-8412
12
4C-9717
8T-2769
4C-8462
15
32
1U-5647
4C-8413
12
4C-9718
8T-2772
4C-8463
9
16
1U-5683
4C-8414
4C-9719
8T-2775
4C-8464
21
32
1U-5686
4C-8415
4C-8477
4C-8494
4C-8465
23
32
1U-5688
1 Also
Kit
Part No.
Inserts
per Kit
Reach
14-1.25 mm
in
in
1 in
2
3 in
4
.472 in
4C-8416
4C-8416
4C-8416
4C-8416
4C-8416
6
6
6
6
6
8T-2801
18-1.50 mm
in
4C-8417
24
in-58 in
4C-8418
10
16
in-18
2
2
Tap
Part No.
Installation
Tool
Part No.
Insert Pkg.
Part No.
Insert
Qty.
8T-2802
in
in
1 in
2
3 in
4
.472 in
9U-5121
9U-5122
9U-5123
9U-5124
9U-5125
6
6
6ID: C44050T1
6
6
4C-8478
4C-8495
in
4C-8466
4C-8479
4C-8496
in-58 in
4C-8467
Reach
3
16
2
2
Shop Supplies
Thread
Size and Length
02a.qxp
10/5/06
1:26 PM
Page 40
Metal Cutting
Thread Inserts
Carded Inserts
Inserts are carded according to thread size for easy handling and display
Contained in a vial marked with part number, thread size, and length
The length of insert in Inch and Metric packages is 112 times the diameter of the bolt
providing sufficient strength in most applications
Spark Plug Inserts are packaged in lengths corresponding to the various spark plug reaches
Shop Supplies
Inch Coarse
Metric Fine
Inch Fine
Thread
Size
Thread
Length
Pkg.
Part No.
Insert
Qty.
Thread
Size
Thread
Length
Pkg.
Part No.
Insert
Qty.
4-20
.375
4C-8419
12
10-32
.285
4C-8433
12
16-18
.469
4C-8420
12
.375
4C-8434
12
8-16
.562
4C-8421
12
.469
4C-8435
12
.562
4C-8436
12
4-28
16-24
16-14
2-13
.750
4C-8423
.656
4C-8437
16-12
.844
4C-8424
.750
4C-8438
8-11
.938
4C-8425
.844
4C-8497
.938
4C-8439
.656
4C-8422
8-24
16-20
2-20
16-18
4-10
1.125
4C-8426
8-9
8-18
1.312
4C-8427
1.125
4C-8440
1-8
1.500
4C-8428
1.312
4C-8441
118-7
1.688
4C-8429
1-14
1.500
4C-8442
114-7
1.875
4C-8430
1-12
1.500
4C-8443
138-6
2.062
4C-8431
118-12
1.688
4C-8444
112-6
2.250
4C-8432
114-12
1.875
4C-8445
138-12
2.062
4C-8446
112-12
2.250
4C-8447
4-16
8-14
Thread
Size
ID: C44245T1
Thread
Length
Pkg.
Part No.
Insert
Qty.
M8 x 1
12.0
4C-8458
12
Thread
Size
Thread
Length
Pkg.
Part No.
Insert
Qty.
M10 x 1
15.0
4C-8459
12
M10 x 1.25
15.0
4C-8460
12
M5 x 0.8
7.5
4C-8448
12
M12 x 1.25
18.0
4C-8461
M6 x 1
9.0
4C-8449
12
M12 x 1.5
18.0
4C-8462
Metric Coarse
M7 x 1
10.5
4C-8450
12
M14 x 1.5
21.0
4C-8463
M8 x 1.25
12.0
4C-8451
12
M16 x 1.5
24.0
4C-8464
M10 x 1.5
15.0
4C-8452
12
M18 x 1.5
27.0
4C-8465
M12 x 1.75
18.0
4C-8453
M14 x 2
21.0
4C-8454
18-1.25 mm
1
2
in
4C-8466
M16 x 2
24.0
4C-8455
7 -181
8
2
5
8
in
4C-8467
M18 x 5.25
27.0
4C-8456
14-1.25 mm
3
8
in
9U-5121
M20 x 5.25
30.0
4C-8457
14-1.25 mm
7
16
14-1.25 mm
1
2
14-1.25 mm
3
4
14-1.25 mm
Spark Plug
in
in
9U-5122
in
9U-5123
in
9U-5124
.472 in
9U-5125
Drill
Size
(1)
(2)
95.29 (3.75)
1.0 in
101.60 (4.00)
107.95 (4.25)
(4)
Drill
Guide
(5)
PreWinder
(6)
(7)
Sleeve
Assembly Insert
(8)
Pilot
(3)
Tap
Guide
Tap
8F-5576
4H-0119 1
8F-5574
8F-5567
9F-7146
9F-7143
8F-5573
9F-7145
1.0 in
118 in
8F-5576
4H-0119 1
8F-5564
8F-5567
9F-7146
9F-7143
8F-5573
9F-7145
8F-5577
4H-0119 1
8F-5575
8F-5568
9F-7148
9F-7143
8F-5574
114.30 (4.50)
118 in
9F-7147
8F-5577
4H-0119 1
8F-5565
8F-5568
9F-7148
9F-7143
8F-5574
101.60 (4.00)
51
64
in
-12
9F-7147
8M-8290
9M-1513
9M-1512
8M-8289 9F-7143
114.30 (4.50)
51
74
in
114.30 (4.50)
29
32
in
-12
8M-8290
9M-1512
8M-8289
9F-7143
-12
9M-6595
8S-6027
8S-6026
9M-6594 9F-7143
9M-6593 9M-6596
Thread
Size
4
4
8
8M-8292
Nib
8M-8292 8M-8291
8M-8291 8M-8291
114.30 (4.50)
29
32
in
9M-6595
8S-6029
8S-6028
8S-6033
8S-6034
8S-6400
8S-6032
120.65 (4.75)
V8
29
83
in
9M-6595
8S-6029
8S-6028
8S-6033
8S-6034
8S-6400
8S-6032
120.65 (4.75
2-Valve
29
32
in
9M-6595
8S-6029
8S-6028
8S-6033
8S-6034
8S-6400
8S-6032
130.75 (5.12)
118 in
8F-5577
5H-8148
8F-5565
8F-5568
9F-7148
9F-7143
5H-8146 5H-8147
130.75 (5.12)
Series F
1.0 in
8F-5576
4H-0119 1
8F-5564
8F-5567
9F-7146
9F-7143
8F-5573
137.31 (5.40)
D343, 1693
90deltaV8
29
32
in
-12
9M-6595
9M-6591
9M-6592
9M-6594 9F-7143
9M-6593 9M-6595
137.31 (5.40)
3400 Series
29
32
in
-12
9M-6595
5P-2417
5P-2418
9M-6594 9F-7143
8S-6400
137.31 (5.40)
60deltaV8,
V12, V16
29
32
in
-12
9M-6595
7S-8739
7S-8740
9M-6594 9F-7143
9M-6593 9M-6596
146.05 (5.75)
114 in
114 -12
8F-5578
146.05 (5.75)
118 in
118 -12
8F-5577
158.75 (6.25)
1.0
1 -12
8F-5576
1P-3571
9M-6596
Special Length Inserts
Thread
Size and Length
Insert
Tap
Installation
Part No. Part No. Tool Part No.
8F-5566
8F-5569
9F-7150
9F-7143
8F-5575
9F-7149
5 -11
8
x 1.250
6V-9076
4C-9686
8F-5565
8F-5568
9F-7148
9F-7143
5H-8146 5H-8147
3 -16
4
x 1.500
6V-9074
4C-9702
6V-9082
8S-6031
8S-6030
9F-7146
9F-7143
8S-6402
M8-1.25 x 16 mm 9U-5177
4C-8475
8T-2790
M16-2 x 32 mm
4C-9732
8T-2799
4H-0119 Pilot is required to locate drill guide and tap guide in later cylinder heads using the larger retainers.
9F-7145
9F-7145
9U-5604
6V-9083
02a.qxp
10/5/06
1:26 PM
Page 41
Metal Cutting
Thread Inserts
Typical Applications
Buses
Trucks
Heavy equipment
Marine equipment
Machinery
Tooling
Power tools
Recreational vehicles
Small engines
ID: C44143T1
Internal
Thread Size
Drill
Size
Drill
Depth
Drill
Part No.
3. Screw in insert until slightly below surface. Lock-tabs act as depth stop.
10-24
10-32
1U-5603
11
32
in
1U-5607
13
32
in
1U-5611
15
32
in
1U-5615
17
32
in
1U-5682
21
32
in
1U-5686
21
32
in
1U-5686
25
32
in
1U-5690
31
32
in
1U-5696
1 332 in
1U-5700
1-8
1-14
1 732 in
1 18-7
1 18-12
1 1132 in
1 14-7
1 14-12
1 1532 in
1 12-6
1 12-12
1 2332 in
4. Drive lock-tabs into the surrounding base material with several light taps
on installation tool to securely lock the insert against rotation.
4-20
32
in
4-28
16-18
16-24
8-16
Internal
Thread Size
Drill
Size
Drill
Depth
Drill
Part No.
M6
7.50 mm
1U-8160
M8
9.50 mm
1U-8167
M10
11.50 mm
1U-8171
M12
13.50 mm
1U-8171
M16
17.75 mm
M20
25.75 mm
M24
28.75 mm
8-24
16-14
16-20
2-13
2-20
16-12
16-18
8-11
8-18
4-10
4-16
8-9
8-14
Reference
Part No.
9S-3500 (UNF)
Size Range
#10 through 112 inch, fine thread
9S-3700 (UNC)
247-9662 (Metric)
M6 through M12
247-9663 (Metric)
M8 through M24
ID: A69887-1T1
Shop Supplies
02a.qxp
10/5/06
1:26 PM
Page 42
Metal Cutting
Thread Inserts
Reference
Special Instruction SEHS8792; Using Caterpillar Replacement Thread Inserts
Shop Supplies
Replacement Kits
ID: A71409T1
ID: A71410T1
Internal
Thread
No.
Insert Kit
Part
No.
No. of
Inserts
Per Kit
Replacement
Kit
Part No.
No. of
Inserts
Per Kit
Insert Data
External
Thread
10-24
9S-3510
15
9S-3674
45
10-32
9S-3509
15
9S-3673
45
1/ -20
4
9U-5053
13
9U-5054
1/ -28
4
9U-5055
13
5/ -18
16
9U-5057
Installation Data
Tap
Size
Length
Tap Drill
Dia.
Drill
Part No.
Csink
Dia. 1
Tap
Part No.
3/ -16
8
1U-5606
3/
8
-16
1P-3025
3/ -16
8
1U-5606
3/
8
-16
1P-3025
40
7/ -14
16
1U-5610
11 mm (.44 in)
7/ -14
16
1P-3027
9U-5056
40
7/ -14
16
1U-5610
11 mm (.44 in)
7/ -14
16
1P-3027
9U-5058
25
1/ -13
2
11 mm (.43 in)
27/
64
1U-5614
13 mm (.51 in)
1/ -13
2
1P-3029
5/ -24
16
9U-5059
9U-5060
25
1/ -13
2
11 mm (.43 in)
27/
64
1U-5614
13 mm (.51 in)
1/ -13
2
1P-3029
3/ -16
8
9S-3618
9S-3651
20
9/ -12
16
13 mm (.50 in)
33/
64
1U-7433
14 mm (.57 in)
9/ -12
16
1P-3031
3/ -24
8
9S-3515
9S-3641
20
9/ -12
16
13 mm (.50 in)
33/
64
1U-7433
14 mm (.57 in)
9/ -12
16
1P-3031
7/ -14
16
9S-3620
9S-3652
18
5/ -11
8
16 mm (.62 in)
37/
64
1U-7434
16 mm (.63 in)
5/ -11
8
1P-3033
7/ -20
16
9S-3619
9S-3642
18
5/ -11
8
16 mm (.62 in)
37/
64
1U-7434
16 mm (.63 in)
5/ -11
8
1P-3033
1/ -13
2
9S-3622
9S-3653
15
3/ -16
4
16 mm (.62 in)
45/
64
1U-7435
19 mm (.76 in)
3/ -16
4
1P-3036
1/ -20
2
9S-3621
9S-3643
15
3/ -16
4
16 mm (.62 in)
45/
64
1U-7435
19 mm (.76 in)
3/ -16
4
1P-3036
9/ -12
16
9S-3624
9S-3654
10
3/ -16
4
20 mm (.81 in)
45/
64
1U-7435
19 mm (.76 in)
3/ -16
4
1P-3036
9/ -18
16
9S-3623
9S-3644
10
3/ -16
4
20 mm (.81 in)
45/
64
1U-7435
19 mm (.76 in)
3/ -16
4
1P-3036
5/ -11
8
9S-3626
9S-3655
7/ -14
8
22 mm (.87 in)
53/
64
1U-7436
22 mm (.88 in)
7/ -14
8
1P-3038
5/ -18
8
9S-3625
9S-3645
7/ -14
8
22 mm (.87 in)
53/
64
1U-7436
22 mm (.88 in)
7/ -14
8
1P-3038
3/ -10
4
9S-3628
9S-3656
11/8-12
28 mm (1.12 in)
11/16
1U-5699
29 mm (1.14 in)
11/8-12
1P-3041
3/ -16
4
9S-3627
9S-3646
11/8-12
28 mm (1.12 in)
11/16
1U-5699
29 mm (1.14 in)
11/8-12
1P-3041
7/ -9
8
9S-3630
9S-3657
11/4-12
32 mm (1.25 in)
13/16
1U-5703
32 mm (1.27 in)
11/4-12
1P-3042
7/ -14
8
9S-3629
9S-3647
11/4-12
32 mm (1.25 in)
13/16
1U-5703
32 mm (1.27 in)
11/4-12
1P-3042
1-8
9S-3632
9S-3658
13/8-12
35 mm (1.37 in)
15/16
1U-5707
35 mm (1.39 in)
13/8-12
1P-3043
1-14
9S-3631
9S-3648
13/8-12
35 mm (1.37 in)
15/16
1U-5707
35 mm (1.39 in)
13/8-12
1P-3043
11/8-7
9S-3633
9S-3675
11/2-12
41 mm (1.62 in)
17/16
1U-5711
39 mm (1.52 in)
11/2-12
1P-3044
11/8-12
9S-3634
9S-3676
11/2-12
41 mm (1.62 in)
17/16
1U-5711
39 mm (1.52 in)
11/2-12
1P-3044
11/4-7
9S-3635
9S-3677
15/8-12
46 mm (1.81 in)
19/16
1U-7437
41 mm (1.62 in)
15/8-12
11/4-12
9S-3636
9S-3678
15/8-12
46 mm (1.81 in)
19/16
1U-7437
41 mm (1.62 in)
15/8-12
11/2-6
9S-3637
9S-3679
17/8-12
51 mm (2.00 in)
113/16
1U-7438
48 mm (1.89 in)
17/8-12
11/2-12
9S-3638
9S-3680
17/8-12
51 mm (2.00 in)
113/16
1U-7438
48 mm (1.89 in)
17/8-12
M6-1
246-7511
10
246-7520
25
M10-1.25
10 mm (.39 in)
8.8 mm
1U-8165
M10-1.25
8T-3086
M8-1.25
246-7513
10
246-7521
25
M12-1.25
12 mm (.47 in)
10.8 mm
1U-8169
M12-1.25
8T-3089
M10-1.5
246-7514
10
246-7522
20
M14-1.5
14 mm (.55 in)
12.8 mm
1U-8173
M14-1.5
8T-3093
M10-1.25
246-7515
246-7523
10
M14-1.5
14 mm (.55 in)
12.8 mm
1U-8173
M14-1.5
8T-3093
M12-1.75
246-7516
246-7524
10
M16-1.5
16 mm (.63 in)
14.7 mm
1U-8177
M16-1.5
8T-3095
M16-2
246-7517
246-7525
M22-1.5
22 mm (.87 in)
20.5 mm
M22-1.5
156-8166
M20-2.5
246-7518
246-7526
M30-2
30 mm (1.18 in)
28 mm
1U-8194
M30-2
M24-3
246-7519
246-7528
M33-2
33 mm (1.30 in)
31 mm
M33-2
1 Use
a standard coutersink tool with an angle from 82 to 100 degrees. The diameter listed in the chart is the measuremt at the top of the counterbore. The tolerance for
this diameter is 0 mm (.0 in) + 0.25 mm (.010 in).
02a.qxp
10/5/06
1:26 PM
Page 43
Metal Cutting
Thread Inserts
176-1691 Fastener
178-1628 Fastener
Reference
NEHS0677 Tool Operating Manual containing installation instructions
Installation Tools
Installation Tool
Part No.
Hex
Length
Bolt Thread
141-7250
inch
M6 x 1.0
178-7635
inch
8-32
179-3571
inch
16
16
16
4-20
Fastener
Threaded Inserts
Part No.
Body Diameter
Flange Diameter
Length
Thread
140-9921
10 mm (.393 in)
14 mm (.551 in)
M6 x 1.0
176-1691
8-32
178-1628
4-20
ID: C78509T1
206-4496
206-4499
205-7047
205-7048
Part No.
Description
Hex
Length
Bolt Thread
206-4496
inch
M4 x 0.7
206-4499
inch
M6 x 1.0
16
16
ID: C80348T1
Part No.
Description
Body Diameter
Flange Diameter
Length
Thread
206-7047
M4 x 0.7
Grip Range
0.50 to 2.00 mm (.020 to .079 in)
206-7048
M6 x 1.0
Shop Supplies
02a.qxp
10/5/06
1:26 PM
Page 44
Metal Cutting
Thread Inserts
Individual Extractors
Useful in maintenance departments, machine shops, garages, workshops, etc., to remove broken screws,
bolts or other threaded parts
First, drill a hole into the broken part. Insert the extractor. By twisting to the left, the extractor will grip
into the wall of the hole and the broken part can be backed out without damaging threads.
ID: C79434T1
Shop Supplies
ID: C79489T1
Extractor
Size
Cat
Part No.
Drill size
to use
Used to remove
Screws and Bolts
Used to remove
Pipe
4C-3364
64
in
4C-3365
64
in
4C-3366
in
4C-3367
4C-3368
17
64
4C-3369
13
32
4C-3370
4C-3371
9
10
in
in
17
32
in
13
16
in
4C-3372
1116 in
1 in
4C-3373
1516 in
114 in
32
4 in
in
in
4C-3374
in
4C-3375
in
4C-3376
15
64
in
4C-3377
in
4C-3378
in
4C-3379
15
32
in
4C-3380
64
16
16
8
in
in
in
16
in
in
8
4
8
2
02a.qxp
10/5/06
1:26 PM
Page 45
Metal Cutting
Thread Inserts
Extractor Sets
For removing broken screws and bolts (eliminates redrilling and retapping for a larger screw)
ID: C44009T1
4C-3364
3
32
4C-3365
5
32
in to
4C-3366
7
32
4C-3367
9
32
in to 38 in and 18 in Pipe
in and 38 in Pipe
4C-3368
3
8
4C-3369
5
8
in to
4C-3370
7
8
4C-3371
4C-3372
4C-3374
4C-3375
4C-3376
4C-3377
4C-3378
4C-3379
16
in
16
8
4
in to 516 in
in and 18 in Pipe
in and
in Pipe
Part No.
To remove bolts,
screws and pipes:
Part No.
To remove bolts,
screws and pipes:
4C-3364
4C-3374
3
16
in
4C-3365
in to
in
4C-3375
3
8
in to 932 in
4C-3366
in to 932 in
4C-3376
7
16
4C-3367
in to 38 in and 18 in Pipe
4C-3377
1
2
4C-3368
4C-3378
5
8
in and 38 in Pipe
4C-3369
in to 532 in
7
32
in to 58 in and 14 in Pipe
7
in and
3
8
in Pipe
32
32
32
32
8
8
in to 532 in
7
32
in to 58 in and 14 in Pipe
in to
in and
3
8
in to 516 in
in
in and 18 in Pipe
in Pipe
To remove bolts,
screws and pipes:
4C-3364
3
32
in to 532 in
4C-3365
5
32
in to 732 in
4C-3366
7
32
in to 932 in
4C-3367
9
32
in to 38 in and 18 in Pipe
4C-3368
3
8
in to 58 in and 14 in Pipe
ID: C44010T1
134 in
138 in
Square drive
5
8
Overall length
1012 in
in
ID: C54443T1
Shop Supplies
Part No.
Part No.
To remove bolts,
screws and pipes:
To remove bolts,
screws and pipes:
02a.qxp
10/5/06
1:26 PM
Page 46
Metal Cutting
Thread Inserts
Shop Supplies
Part No.
For
For Broken Stud
Extractor Broken Pipe or Screw
Number (inch)
(inch)
282-2109
282-2110
282-2111
282-2112
282-2113
10
282-2115
118 or 114
282-2116
112 or 134
282-2117
114
282-2118
112
2
214 or 212
282-2119
3 or 312
or 34
or 1
ID: D01810T1
ID: C41288T1
Part No.
Size
Part No.
Size
Part No.
Size
4C-3335
16
in
4C-3345
4C-3355
3
8
4C-3336
5
64
in
4C-3346
13
64
4C-3356
25
64
in
4C-3337
in
4C-3347
4C-3357
13
32
in
4C-3338
in
4C-3348
17
64
4C-3358
27
64
in
4C-3339
4C-3349
4C-3359
7
16
4C-3340
in
4C-3350
19
64
4C-3360
28
64
in
4C-3341
in
4C-3351
4C-3361
15
32
in
4C-3342
11
64
4C-3352
21
64
in
4C-3362
31
64
in
4C-3343
4C-3353
11
32
in
4C-3363
1
2
4C-3344
13
64
4C-3354
23
64
in
32
64
8
in
64
32
16
in
in
in
Reference
GMG02078 Special Instruction
Item
Part No.
Description
2P-5527
Extractor, 34 in
2P-5528
Extractor, 78 in
2P-5529
Extractor, 1 in
2P-5497
Body
2P-5538
Bolt
2P-5537
Washer
ID: B80755T1
32
in
in
in
32
16
in
in
in
in
in
in
in
02a.qxp
10/5/06
1:26 PM
Page 47
Metal Cutting
Thread Inserts
Stud Removers
Replaces 5P-0250 Group
Handles larger studs
Part No.
Description
1U-8582
Main Housing
Size
1U-8583
Collet
112-6-2B
1U-8584
Collet
112-12-2B
1U-9994
Collet
138-6-2B
1U-9995
Collet
138-12-2B
1U-9996
Collet
114-7-2B
1U-9998
Collet
118-7-2B
ID: C34440T1
ID: C44278T1
Shop Supplies
ID: C07882T1
Part No.
Description
Size
8S-1365
Collet
1
4
in - 20
8S-1366
Collet
1
4
in - 28
8S-1367
Collet
5
16
in - 18
8S-1368
Collet
5
16
in - 24
8S-1369
Collet
3
8
in - 16
8S-1370
Collet
3
8
in - 24
8S-1371
Collet
7
16
in - 14
8S-1372
Collet
7
16
in - 20
8S-1373
Collet
1
2
8S-1375
Collet
9
16
in - 12
8S-1376
Collet
9
16
in - 18
8S-1346
Collet
5
8
in - 11
8S-1377
Collet
5
8
in - 18
8S-1364
Box
1
2
in - 20
in - 13
Not Shown
8S-1374
Collet
8S-1347
Housing
Used to quickly and easily install metric studs (not for stud removal)
Can be used with standard wrench or impact wrench
Reduces possible damage to threads
Designed to easily release from stud after installation
Ensures reliable bolted joint (reduces chance of stud backout)
Part No.
Size
204-7932
M16 x 2.0
204-7933
M20 x 2.5
204-7934
M24 x 3.0
204-7935
M30 x 3.5
204-7936
M36 x 3.0
ID: C80194T1
02a.qxp
10/5/06
1:26 PM
Page 48
Metal Cutting
Shop Supplies
Will cut cast iron, stainless steel, high alumina refractory, and slag
Can be used indoors, because the noise and smoke levels are very low
Faster and less expensive than carbon arc and requires oxygen only
Durable, comfortable, and less fatiguing to use
Large squeeze trigger-type handle control delivers oxygen precisely.
Excellent tool for gouging hard facing. Unlike carbon arc,
the rods contain no carbon, thus reducing the grinding requirement.
Item
Part No.
ID: C10294T1
Description
General purpose rods for removing small bolts and pins by piercing
4.76 mm x 55.24 cm (316 in x 2134 in)
6.35 mm x 55.24 cm (14 in x 2134 in)
Rods for piercing track pins, washing away welds, and gouging hard facing
9.52 mm x 46.67 cm (38 in x 1838 in)
Cut off and gouging rod for piercing longer pins and rough cutting
9.52 mm x 91.44 cm (38 in x 36 in)
8T-7792
8T-9110
Washer
8T-7795
8T-7794
Not shown
8T-9202
Not shown
8T-7793
Striker Plate
Not shown
8T-9287
Washer
Purchase separately
5
8T-7697
8T-7696
8T-7698
Not shown
8T-9201
Not shown
8T-7699
Igniter
Not shown
9U-5614
Shield
Not shown
9U-5615
Not shown
Miscellaneous
9A-1593 Surface Texture Replica (Comparison)
Used as a reference tool for metal surface reconditioning during reuse
and salvage of major components
Provides user with a physical representation of surface finish specifications
that are called out in Reuse and Salvage Guidelines
Provides 12 examples of F, H, K, and N surface textures for cast iron
and steel
References
SEBF8271, Guideline for Reusable Parts
ID: D00290T1
Collet Nut-Brass
Form SEHS8923
02b.qxp
10/5/06
1:26 PM
Page 49
ID: C79777T1
Part No.
Thread
Size
(in - TPI)
9S-4180
5
16
1N-5999
9S-4182
7
16
ID: C79732T1
ORFS Plugs
JIC 37 Plugs
Part No.
A
Thread
Dash
Size
A
Thread
Size
(in - TPI)
Length
(in)
(mm)
6V-9507
-4
0.67
6V-9508
-6
11
16
0.75
6V-9509
-8
13
16
0.87
22
6V-9510
-10
1 - 14
1.02
26
6V-9511
-12
1316 - 12
1.06
6V-9512
-16
1716 - 12
1.10
6V-9513
-20
11116
231-3942
-24
2-12
16
- 18
- 16
- 16
- 12
L
Part No.
A
Thread
Dash
Size
A
Thread
Size
(in - TPI)
Length
(in)
(mm)
17
9S-5518
-4
7
16
0.79
20
3K-8460
1
2
19
5P-4996
-5
1
2
0.79
20
9S-4191
9
16
9S-8927
-6
9
16
0.83
21
9S-4185
3
4
- 16
3K-0360
5P-2909
-8
3
4
- 16
0.94
24
9S-4190
7
8
- 14
2M-9780
27
2P-9697
-10
7
8
- 14
1.10
28
9S-4183
1116 - 12
3D-2824
28
9S-8895
-12
1116 - 12
1.26
32
9S-4188
1316 - 12
4K-1388
1516 - 12
7M-8485
- 20
- 20
- 18
O-ring
Seal
- 24
4J-7533
- 24
7J-0204
- 20
3J-7354
- 20
1J-9671
- 18
3J-1907
1.10
28
5P-4299
-14
13
- 12
1.30
33
9S-4181
1.10
28
5P-2299
-16
1516 - 12
1.34
34
9S-6130
158 - 12
2S-4078
1N-5998
178 - 12
6K-6307
9S-7583
212 - 12
030-4606
16
ID: C79487T1
ID: C79800T1
ID: C79607T1
Part No.
Thread
Size
(in - TPI)
Part No.
Thread
Size
(in - TPI)
2S-7905
2B-7408
1
8
- 27
7J-0204
5M-6214
1
8
- 27
2B-7409
1
4
- 18
3J-7354
5M-6213
1
4
- 18
2B-7457
3
8
- 18
1J-9671
3J-5390
3
8
- 18
5B-9169
- 14
3J-1907
4J-4382
- 14
5P-3320
- 14
- 16
3K-0360
3M-7045
- 14
7L-2505
1 - 1112
- 14
2M-9780
090-9019
1 - 1112
068-0710
114 - 1112
1116 - 12
3D-2824
4B-8586
2 - 1112
Part No.
Thread
Size
(in - TPI)
O-ring
Seal
9S-8001
4J-7533
9S-8007
- 24
9S-8002
16 - 20
9S-8003
9S-8004
9S-8005
9S-8006
9S-8008
9S-8009
1316
- 12
4K-1388
9S-9334
1516 - 12
7M-8485
9S-8010
158 - 12
2S-4078
5P-7684
178 - 12
6K-6307
16
- 20
16
4
8
- 24
- 18
16
2
4
- 27
Shop Supplies
02b.qxp
10/5/06
1:26 PM
Page 50
Shop Supplies
Part No.
Thread
Size
(in - TPI)
Part No.
Thread
Size
(in - TPI)
7F-9504
1
4
4D-0514
1
16
4B-4845
3
8
9F-2247
2B-0858
7H-3171
1B-5174
4 - 14
7M-7410
3B-0551
1 - 1112
3L-1850
1
2
1B-5170
11
1112
6L-8355
3
4
7B-9665
112 - 1112
2R-5657
1 - 1112
6V-1897
2 - 1112
6V-3280
212 - 8
6V-3257
312 - 8
- 18
- 18
- 14
8
4
Part No.
JIS-BSPP
Thread
Size
(in - TPI)
- 27
093-1321
1
4
- 19
- 18
096-6073
3
8
- 19
093-1322
1
2
- 14
- 14
093-1323
3
4
- 14
- 14
096-3829
1 - 11
- 27
8 - 18
ID: C79767T1
ID: C79608T1
Metric Plugs
ID: C79767T1
Part No.
A
Metric
Thread
Size
(dia x pitch)
Light
Duty
Tube
O.D.
(mm)
Heavy
Duty
Tube
O.D.
(mm)
Length
(in)
(mm)
105-5211
M12 x 1.5
0.65
2Y-6462
M14 x 1.5
9T-6322
M14 x 1.5
2Y-5841
M16 x 1.5
2Y-6461
8C-4424
1 Size
ID: C79799T1
ID: C79466T1
ID: C79770T1
L
Part No.
A
Head
Size
(in)
(mm)
A
Flange
Dash
Size
5H-4017
1.19
30.2
-8
17
5H-4018
1.50
38.1
-12
0.63
16
5H-4019
1.75
44.5
0.87
22
5H-4020
2.00
10
0.63
16
2J-2668
M16 x 1.5
10
0.71
18
2J-5608
M22 x 1.5
14
14
1.06
27
not available.
Part No.
A
Head
Size
(in)
(mm)
A
Flange
Dash
Size
5P-0045
1.25
31.8
-8
5P-0046
1.63
41.3
-12
-16
5P-0047
1.88
47.6
-16
50.8
-20
5P-0048
2.12
54.0
-20
2.38
60.3
-24
5P-0049
2.50
63.5
-24
2.81
71.4
-32
5P-0050
3.13
79.4
-32
02b.qxp
10/5/06
1:26 PM
Page 51
The tapered design allows the part to plug multiple inner diameters or cap multiple outside diameters
Protects against damage, dirt, moisture and corrosion during storage and shipping
Material: Low-Density Polyethylene
Color: Blue
Applicable Spec: NAS 834 (supercedes MIL-C-5501/7, MIL-C-52078)
ID: D01665T1
To assure a proper fit, dimension E should be approximately .020 in smaller than the opening diameter of the part to be
protected, or dimension A should be approximately .020 in larger than the opening diameter of the part to be protected.
Use as a cap
Part No.
Pkg.
A
Qty. (in)
(mm)
(in)
(mm)
(in)
276-0731
250
0.18
0.11
0.31
0.40
10
0.05
0.11
1 T-0-X
276-0740
250
0.24
0.17
0.37
10
0.37
10
0.10
0.17
2 T-1
276-0741
250
0.27
0.20
0.43
11
0.37
10
0.15
0.20
4 T-1-X
276-0742
250
0.30
0.24
0.46
12
0.37
10
0.17
0.24
5 T-2
276-0743
250
0.33
0.26
0.46
12
0.37
10
0.20
0.27
6 T-2-X
276-0744
250
0.36
0.30
0.53
13
0.37
10
0.23
0.30
7 T-3
9U-7067
250
0.40
10
0.33
0.56
14
0.38
10
0.27
0.33
8 T-3-X
9U-7068
250
0.43
11
0.36
0.59
15
0.38
10
0.30
0.37
9 T-4
276-0745
250
0.46
12
0.39
10
0.62
16
0.37
10
0.32
0.39
10
10 T-4-X
9U-7069
250
0.49
12
0.42
11
0.59
15
0.38
10
0.36
0.42
11
11 T-5
276-0746
250
0.51
13
0.44
11
0.62
16
0.40
10
0.38
10
0.44
11
12 T-5-X
9U-7070
250
0.55
14
0.49
12
0.72
18
0.50
13
0.41
10
0.49
12
13 T-6-5
276-0747
250
0.56
14
0.50
13
0.75
19
0.43
11
0.43
11
0.50
13
14 T-6-X
9U-7071
250
0.62
16
0.53
13
0.75
19
0.50
13
0.47
12
0.55
14
16 T-7-X
9U-7072
250
0.63
16
0.55
14
0.78
20
0.50
13
0.49
12
0.57
14
17 T-8
276-0748
250
0.67
17
0.58
15
0.87
22
0.53
13
0.52
13
0.60
15
18 T-8-X
276-0749
250
0.69
18
0.61
15
0.84
21
0.50
13
0.54
14
0.63
16
20 T-9
9U-7073
250
0.73
18
0.64
16
0.88
22
0.50
13
0.58
15
0.67
17
21 T-9-X
9U-7074
250
0.75
19
0.67
17
0.88
22
0.63
16
0.62
16
0.69
18
22 T-10
9U-7075
250
0.79
20
0.69
18
0.94
24
0.63
16
0.63
16
0.72
18
23 T-11
9U-7076
250
0.85
22
0.75
19
1.03
26
0.63
16
0.69
17
0.79
20
27 T-12
9U-7077
250
0.91
23
0.80
20
1.09
28
0.75
19
0.74
19
0.85
21
28 T-12-X
276-0750
250
0.93
24
0.82
21
1.12
29
0.62
15
0.75
19
0.86
22
29 T-13-A
9U-7078
250
0.98
25
0.87
22
1.11
28
0.63
16
0.81
21
0.92
23
31 T-13-X
9U-7079
250
1.04
26
0.90
23
1.16
29
0.75
19
0.83
21
0.98
25
35 T-14
9U-7080
250
1.09
28
0.97
25
1.25
32
0.75
19
0.90
23
1.03
26
40 T-14
9U-7081
250
1.15
29
1.00
25
1.31
33
0.75
19
0.94
24
1.08
27
41 T-14-X
9U-7082
250
1.23
31
1.11
28
1.52
39
0.75
19
1.04
26
1.18
30
42 T-15-X
7E-8716
250
1.29
33
1.18
30
1.44
37
0.75
19
1.11
28
1.22
31
44 T-15-S
276-0751
250
1.35
34
1.22
31
1.50
38
0.75
19
1.16
29
1.29
33
45 T-16
9U-7084
250
1.35
34
1.24
31
1.50
38
0.75
19
1.17
30
1.30
33
46 T-16
276-0752
250
1.45
40
1.29
33
1.62
41
1.00
25
1.22
31
1.39
35
48 T-17
276-0753
250
1.46
37
1.31
33
1.62
41
0.75
19
1.24
32
1.40
36
49 T-17
9U-7085
250
1.60
41
1.45
37
1.75
44
0.75
19
1.39
35
1.54
39
53 T-18
9U-7086
100
1.60
41
1.52
39
1.75
44
0.75
19
1.46
37
1.54
39
54 T-18-X
9U-7087
100
1.68
43
1.56
40
1.88
48
0.75
19
1.50
38
1.62
41
55 T-19
276-0754
100
1.75
44
1.60
41
1.93
49
0.75
19
1.56
40
1.68
43
56 T-19
9U-7088
100
1.88
48
1.75
44
2.03
52
0.75
19
1.69
43
1.82
46
57 T-210
9U-7089
100
1.94
49
1.81
46
2.13
54
1.00
25
1.75
44
1.88
48
58 T-21
276-0755
100
2.02
51
1.84
47
2.12
54
1.00
25
1.78
45
1.93
49
60 T-22-S
276-0756
100
2.16
55
1.98
50
2.25
57
1.00
25
1.91
49
2.11
54
63 T-25-A
276-0757
100
2.25
57
2.06
52
2.43
62
1.03
26
2.00
51
2.17
55
66 T-240
9U-7090
50
2.26
57
2.23
57
2.50
64
0.50
13
2.17
55
2.20
56
68 T-240
(mm)
(in)
E
(mm)
(in)
F
(mm)
(in)
(mm)
Supplier
Part No.
Shop Supplies
02b.qxp
10/5/06
1:26 PM
Page 52
Pkg.
A
Qty. (in)
(mm)
Use as a cap
B
(in)
C
(mm)
(in)
D
(mm)
(in)
E
(mm)
(in)
(mm)
(in)
(mm)
Supplier
Part No.
9U-7091
50
2.47
63
2.30
58
2.63
67
1.00
25
2.24
57
2.40
61
71 T-43-A
276-0758
50
2.60
66
2.39
61
2.62
67
1.00
25
2.33
59
2.54
65
73 T-44
276-0759
50
2.69
68
2.56
65
2.87
73
0.75
19
2.50
64
2.62
67
77 T-44
9U-7092
50
2.79
71
2.65
67
3.00
76
0.50
13
2.58
66
2.73
69
78 T-45-A
6V-7494
50
3.00
76
2.74
70
3.13
79
1.00
25
2.68
68
2.94
75
81 T-57-A
276-0760
50
3.24
82
2.98
76
3.37
86
1.00
25
2.90
74
3.16
80
85 T-501
9U-7094
50
3.45
88
3.32
84
3.63
92
0.50
13
3.24
82
3.37
86
87 T-1050
9U-7095
50
3.58
91
3.24
82
3.94
100
1.00
25
3.16
80
3.49
89
88 T-1051
276-0761
50
3.75
95
3.55
90
4.00
102
1.00
25
3.47
88
3.67
93
K-851 T-502
276-0762
50
3.92
100
3.80
97
4.12
105
0.68
17
3.71
94
3.84
98
91 T-1063
9U-7096
50
4.46
113
4.22
107
5.00
127
1.00
25
4.14
105
4.38
111
94 T-1076
6V-7496
50
4.62
117
4.37
111
5.00
127
1.00
25
4.29
109
4.50
114
95 T-1076
Shop Supplies
Straight Cap
Straight Cap
ID: D01671T1
Part No.
Pkg.
Qty.
217-1591
50
Material
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
(mm)
1.25
31.65
0.67
17
25.22
1.06
26.82
0.05
1.4
Non-threaded Caps
ID: D01677T1
Part No.
Pkg.
Qty.
9U-7166
9U-7167
Material1
Diam. A
(in)
(mm)
Length B
(in)
(mm)
Part No.
Pkg.
Qty.
Material1
Diam. A
(in)
(mm)
Length B
(in)
(mm)
250
0.13
0.63
250
0.25
0.88
16
9U-7182
100
1.31
33
0.88
22
22
9U-7183
100
1.38
35
0.88
9U-7168
250
0.30
22
0.88
22
9U-7184
100
1.44
37
0.88
9U-7169
250
0.38
22
10
0.88
22
9U-7185
100
1.50
38
0.88
9U-7170
250
22
0.44
11
0.88
22
9U-7186
100
1.63
41
1.00
9U-7171
250
25
0.50
13
0.88
22
9U-7187
100
1.69
43
0.88
9U-7172
22
250
0.56
14
0.88
22
9U-7188
100
1.75
44
0.88
22
9U-7173
250
0.63
16
0.88
22
9U-7189
100
1.88
48
0.88
22
9U-7174
100
0.69
17
0.88
22
9U-7190
100
2.00
51
0.88
22
9U-7175
100
0.75
19
0.88
22
9U-7191
100
2.13
54
0.88
22
9U-7176
100
0.81
21
0.88
22
9U-7192
100
2.38
60
0.88
22
9U-7177
100
0.88
22
0.88
22
9U-7193
100
2.50
64
0.88
22
9U-7178
100
1.00
25
0.75
19
9U-7194
50
3.13
79
1.38
35
9U-7179
100
1.06
27
0.88
22
9U-7180
100
1.19
30
1.00
25
9U-7181
100
1.25
32
0.88
22
02b.qxp
10/5/06
1:26 PM
Page 53
ID: D01227T1
Part No.
Pkg.
Qty.
Material1
Metric
Thread
Size
(dia x pitch)
9U-7145
100
M10 x 1.0
0.39
10
0.54
14
0.29
9U-7146
100
M12 x 1.5
0.47
12
0.62
16
0.37
10
9U-7147
100
M14 x 1.5
0.47
12
0.70
18
0.37
10
9U-7148
100
M16 x 1.5
0.47
12
0.78
20
0.37
10
9U-7149
100
M18 x 1.5
0.55
14
0.85
22
0.45
12
9U-7150
100
M20 x 1.5
0.55
14
0.92
24
0.37
10
9U-7151
50
M22 x 1.5
0.54
14
1.02
26
0.45
12
9U-7152
50
M24 x 1.5
0.55
14
1.14
29
0.45
12
9U-7153
50
M26 x 1.5
0.55
14
1.18
30
0.45
12
(in)
(mm)
(in)
(mm)
(in)
(mm)
Shop Supplies
Part No.
Pkg.
Qty.
Material1
Metric
Thread
Size
(dia x pitch)
9U-7136
100
M10 x 1.0
0.57
15
0.60
15
0.41
9U-7137
100
M12 x 1.0
0.66
17
0.73
19
0.42
11
9U-7138
50
M14 x 1.5
0.68
17
0.73
19
0.37
10
9U-7139
50
M16 x 1.5
0.68
17
0.87
22
0.50
13
9U-7140
50
M18 x 1.5
0.72
18
0.96
24
0.54
14
9U-7141
50
M20 x 1.5
0.72
18
1.04
26
0.55
14
9U-7142
50
M22 x 1.5
0.72
18
1.11
28
0.54
14
9U-7143
50
M24 x 1.5
0.73
19
1.23
31
0.54
14
9U-7144
50
M26 x 1.5
0.73
19
1.46
37
0.54
14
ID: D01689T1
(in)
(mm)
(in)
(mm)
(in)
(mm)
10
ID: D01695T1
Part No.
Pkg.
Qty.
Material1
Thread
Size
(in - TPI)
9U-7104
250
9U-7105
100
9U-7106
100
9U-7107
100
9U-7108
100
9U-7109
100
11
16
9U-7110
50
13
16
- 12
9U-7111
50
15
- 12
9U-7112
50
9U-7113
50
Tube
Diameter
(in) (mm)
(in)
(mm)
0.62 16
0.18
0.30
13
0.68 12
0.18
0.36
0.50
13
0.75 19
0.18
0.33
- 16
0.68
17
0.94 24
0.19
0.44
11
- 14
0.75
19
1.06 27
0.24
0.50
13
0.87
22
1.31 33
0.25
0.62
16
1.00
25
1.50 38
0.30
0.70
18
1.07
27
1.62 41
0.30
0.70
18
158 - 12
1.13
29
1.88 43
0.30
0.75
19
178 - 12
1.50
38
2.13 54
0.30
0.75
19
- 20
16
4
8
- 18
16
- 14
1.00
25.4
(in)
0.43
11
0.50
(mm)
D
(mm)
- 20
(mm)
C
(in)
16
(in)
02b.qxp
10/5/06
1:26 PM
Page 54
Shop Supplies
ID: D01701T1
ID: D01239T1
Part No.
9U-7114
9U-7115
Pkg.
Qty.
250
250
Material1
Thread
Size
(in - TPI)
Tube
Diameter
(in)
(mm)
7
16
- 20
0.25
9
16
- 18
0.38
6.4
9.5
9U-7116
250
3
4
- 16
0.50
12.7
9U-7117
100
7
8
- 14
0.63
15.9
9U-7118
100
11
16
- 12
0.75
19.1
9U-7119
100
15
16
- 12
1.00
25.4
Part No.
Pkg.
Qty.
Material1
Thread
Size
(in - TPI)
(in)
(mm)
(in)
9U-7098
250
- 27
0.28
0.38
10
9U-7099
250
- 18
0.38
10
0.44
11
9U-7100
250
- 18
0.44
11
0.50
13
9U-7101
250
1
2
- 14
0.56
14
0.56
14
9U-7102
100
3
4
- 14
0.69
17
0.63
16
8
4
ID: D01713T1
Part No.
Pkg.
Qty.
9U-7103
100
Material1
Thread
Size
(in - TPI)
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
(mm)
1 - 1112
0.50
13
1.57
40
0.25
1.18
30
(mm)
02b.qxp
10/5/06
1:26 PM
Page 55
ID: D01719T1
Material1
Thread
Size
(in - TPI)
JIC/SAE
Fitting
(in)
250
7
16
4-TS
0.46
9U-7121
250
1
2
9U-7122
250
9
16
9U-7123
250
11
16
9U-7124
250
3
4
9U-7125
250
13
16
9U-7126
250
7
8
9U-7127
250
9U-7128
250
9U-7129
250
9U-7130
Part No.
Pkg.
Qty.
9U-7120
- 20
- 20
- 18
- 16
- 16
12
(in)
(mm)
0.43
11
5-TS
0.46
12
0.49
12
6-TS
0.48
12
0.55
14
7-TS
0.48
12
0.67
17
8-TS
0.56
14
0.74
19
0.56
14
0.80
20
0.65
17
0.87
22
1 - 14
11-TS
0.65
17
0.99
25
11
16
- 12
12-TS
0.75
19
1.05
27
13
16
- 12
13-TS
0.75
19
1.17
30
100
15
16
- 12
16-TS
0.75
19
1.30
33
9U-7131
100
1716 - 12
17-TS
0.75
19
1.43
36
9U-7132
100
158 - 12
20-TS
0.83
21
1.62
41
9U-7133
100
11116 - 12
21-TS
0.83
21
1.67
42
9U-7134
100
178 - 12
24-TS
0.95
24
1.87
48
9U-7135
50
212 - 12
32-TS
1.20
30
2.49
63
- 14
Shop Supplies
9-TS
10-TS
- 16
A
(mm)
ID: C79725T1
Material1
Thread
Size
(in - TPI)
(in)
(mm)
(in)
(mm)
(in)
(mm)
100
- 28
0.41
11
0.65
16
0.16
9U-7196
100
- 19
0.50
13
0.74
19
0.26
9U-7197
100
- 19
0.47
12
0.90
23
0.27
9U-7198
100
1
2
- 14
0.68
17
1.10
28
0.41
10
9U-7199
50
- 14
0.72
18
1.23
31
0.51
13
9U-7200
50
3
4
- 14
0.67
17
1.27
32
0.43
11
9U-7201
50
7
8
- 14
0.71
18
1.50
38
0.53
14
9U-7202
50
1 - 11
0.66
17
1.57
40
0.42
11
Part No.
Pkg.
Qty.
9U-7195
ID: C79746T1
8
4
ID: C79775T1
Part No.
Pkg.
Qty.
Material1
Thread
Size
(in - TPI)
9U-7154
25
9U-7155
25
9U-7156
25
9U-7157
25
Thread
Size
(in - TPI)
Part No.
Pkg.
Qty.
Material1
9U-7161
25
3
4
9U-7162
25
1 NPT
1 NPT
9U-7163
25
114 NPT
114 NPT
9U-7164
25
112 NPT
9U-7165
25
2 NPT
NPT
4 NPT
9U-7158
25
112
9U-7159
25
2 NPT
9U-7160
25
212 NPT
NPT
NPT
02b.qxp
10/5/06
1:26 PM
Page 56
Vises
Vises
Tradesman Vises
Warranty: Manufacturers
Shop Supplies
Replaceable, hardened steel serrated jaw inserts and replaceable pipe jaws
Precision, machined keyed slide bar
Built for maximum quality and performance
Straight line design means no wear on spindle or nut
360 swivel base, double lockdowns
Side play eliminated by precision machined slide bar keyed for precision
Fully enclosed design keeps dirt and contaminants out
ID: C33302T1
Max.
Opening
Shipping
Weight
Replacement
Jaw Insert Kits
Replacement
Pipe Jaw
Inserts
3716 in
412 in
37 lb
236-2646
236-2654
334 in
514 in
50 lb
236-2647
236-2655
in-312 in
418 in
534 in
64 lb
236-2648
236-2656
in-312 in
434 in
7 in
109 lb
188-2171
188-2752
Cat
Part No.
Jaw
Width
Pipe
Capacity
Throat
Depth
233-8145
4 in
in-2 in
233-8146
5 in
in-212 in
233-8147
6 in
188-2163
8 in
4
4
4
8
Jaw
Width
Replacement
Jaw Insert
Replacement
Pipe Jaw
Inserts
188-2143
412 in
188-2165
4C-4400
188-2145
512 in
188-2167
4C-4400
188-2147
612 in
188-2170
4C-4400
4C-3741
4 in
4C-4391
4C-4400
4C-3742
5 in
4C-4392
4C-4400
4C-3743
6 in
4C-4393
4C-4400
Machinist Vises
Warranty: Manufacturers
Wilton
Part
No.
Jaw
Width
4C-3751
350S
4C-3752
400S
4C-3753
4C-3754
Throat
Depth
Max.
Opening
Shipping
Weight
Replacement
Jaw Inserts
312 in
234 in
514 in
46 lb
4C-4397
4 in
312 in
612 in
66 lb
4C-4398
450S
412 in
4316 in
712 in
73 lb
4C-4394
500S
5 in
414 in
8 in
97 lb
4C-4399
ID: C33303T1
ID: C33304T1
Wilton
Part No.
Jaw
Width
Pipe
Capacity
Throat
Depth
4C-3744
C-1
412 in
in-312 in
434 in
6 in
80 lb
4C-4394
4C-4401
4C-3745
C-2
5 in
in-412 in
5516 in
7 in
113 lb
4C-4395
4C-4402
4C-3746
C-3
6 in
in-6 in
658 in
9 in
209 lb
4C-4396
4C-4403
8
8
8
Max.
Opening
Shipping
Weight
Replacement
Jaw Inserts
Replacement
Pipe Jaw
Inserts
Cat
Part No.
02b.qxp
10/5/06
1:26 PM
Page 57
Vises
ID: C41330T1
Jaw
Width
4C-6830
4 in
4C-3741, 4C-3752
4C-6831
412 in
4C-3753, 4C-3744
4C-6832
5 in
4C-6833
6 in
4C-3743, 4C-3746
ID: C41331T1
Jaw construction includes a 120 horizontal Vee-Groove, 3 vertical Vee-Grooves and a 90 groove for marking out and center punching
Ideal for light tapping and thread cutting applications
Capable of clamping a block of material in a vise to be utilized as a surface plate for light duty work
Jaw caps sold separately
ID: C41332T1
Cat
Part No.
Jaw
Width
4C-6834
4 in
4C-3741, 4C-3752
4C-6835
412 in
4C-3753, 4C-3744
4C-6836
5 in
4C-6837
6 in
4C-3743, 4C-3746
ID: C41333T1
Jaw Caps
Designed to avoid marring the surface of softer metals and to protect jaw faces
Made to fit any size vise
Polished faces and pliable copper extensions for a sure-grip fit on any make vise
Part No.
Description
Width
4C-3750
Jaw Cap
4 inch
4C-3749
Jaw Cap
412 inch
4C-3748
Jaw Cap
5 inch
4C-3747
Jaw Cap
6 inch
ID: C33305T1
Shop Supplies
Cat
Part No.
02b.qxp
10/5/06
1:26 PM
Page 58
Vises
Shop Supplies
Capacity
250 lb
ID: 57495T1
Part No.
Capacity
Throat
Depth
Spindle
Dia.
Minimum
Proof Test
Weight
4C-3755
0 - 2 in
11316 in
in
2,700 lb
138 lb
4C-3756
0 - 3 in
11516
in
3,000 lb
123 lb
4C-3757
0 - 4 in
2516 in
3,700 lb
234 lb
4C-3758
0 - 6 in
21516 in
in
4,500 lb
334 lb
4C-3759
2 in - 8 in
3716 in
in
5,200 lb
7 lb
4C-3760
112
334
in
in
6,000 lb
83
4C-3761
118 in - 12 in
378 in
in
8,000 lb
12 lb
in - 10 in
in
16
16
8 in
8
4
4
4
lb
ID: C33306T1
02b.qxp
10/5/06
1:26 PM
Page 59
ID: C33375T1
Part No.
4C-4913
4C-4914
4C-9799
DC output rating
AC input rating
Charging capacity
16
16
16
Voltmeter/ammeter
11-17/0-50
11-17/0-110
11-17/0-50
DC charging cables
1.83 m (6 ft)
1.524 m (5 ft)
1.83 m (6 ft)
AC connection
Weight
Dimensions (HWD)
38.1 x 30.5 x 28 cm
(15 in x 12 in x 11 in)
55.9 x 38.1 x 28 cm
(22 in x 15 in x 11 in)
Up to 4
DC charging leads 10 pair, 10 gauge, 914.4 mm (36 in) long with 300 Amp insulated safety clamps
Insulated storage bars and connections ensure there are no live electrical connections
3-shelf rack stores up to 12 batteries
Durable 3 mm (18 in) polypropylene sheet protects shelves from damage
Acid resistant resists scratching and chipping
Convenient snap together heavy-gauge steel construction
ID: C44065T1
Parallel charging 10 battery capacity use one bus bar or combine several for added capacity
Insulated fiberglass backboard
DC charging leads 10 pair, 10 gauge, 914.4 mm (36 in) long with 300 Amp insulated safety clamps
.9 m (3 ft) 4 AWG cables included to connect to charger or additional bus bars
ID: C33378T1
Shop Supplies
ID: C33374T1
02b.qxp
10/5/06
1:26 PM
Page 60
Part No.
Description
4C-4912
120 V, 50/60 Hz
4C-9800
220 V, 50/60 Hz
Shop Supplies
Warranty: Manufacturers
ID: C79699T1
Part. No.
Input
Volt
UL
Continuous
Ratings
(Amps)
UL
Cranking
Assist Rate
(Amps)
UL Boost
Rate
(Amps)
AC
Cord
DC
Leads
Clamp
Rating
Volt
Wt.
kg
4C-4920
110
100/70
300
550
10 ft 14-3
8 ft 4AWG
500A
6/12
26.3
58
lbs
4C-4921
110
100/75/50/40
300
600
10 ft 14-3
8 ft 4AWG
500A
6/12/18/24
31.7
70
4C-4910
220
100/75/50/40
300
600
10 ft 14-3
8 ft 4AWG
500A
6/12/18/24
31.7
70
Charges all standard and maintenance-free batteries with four charging positions
Heavy-duty chrome plated handles
Fan cooled
UL and CSA listed for indoor/outdoor use
ID: D01605T1
Part. No.
UL Continuous
Ratings
(Amps)
UL Cranking
Assist Rate
(Amps)
UL Boost
Rate
(Amps)
AC
Cord
DC
Leads
Clamp
Rating
Volt
Weight
kg
lbs
4C-4924
70/60
230
420
612 ft 16-3
7 ft 4AWG
500A
6/12
17.2
38
4C-4925
40/10/2
132
250
612 ft 16-3
6 ft 8AWG
200A
6/12
11.8
26
02b.qxp
10/5/06
1:26 PM
Page 61
AC/DC Cables
Weight
10 amps
16 ft, 16 gauge
11 lbs 4oz
ID: C80276T1
Shop Supplies
Cables
Warranty: Manufacturers
Polarized plug on both ends
Mates with either 4C-9917 or 4C-4943 Power Socket
Part No.
Description
Mates with
4C-9802
4C-9801
ID: C44332T1
Booster Cables
Warranty: Manufacturers
Professional quality
Ensure quick and efficient connections
Designed for convenience and safety
ID: C33385T1
Approx.
Individual
Weight
Part No.
Length
Gauge
4C-4933
4 AWG
37,360
PVC
500E
yes
2.7 kg (6 lbs)
4C-4934 1
4 AWG
32,900
T-94
500E
yes
3.6 kg (8 lbs)
4C-4935
4 AWG
37,360
PVC
500E
yes
3.6 kg (8 lbs)
4C-4936
6 m (20 ft)
4 AWG
37,360
PVC
500E
yes
4.1 kg (9 lbs)
300-5899
6 m (20 ft)
2 AWG
62,450
PVC
600P
yes
1/0 AWG
106,400
T-94
800
no
4C-4938
1 Equipped
Jacket
Amp
Clamp
Side
Terminal
Adapters
Cir. Mil.
Copper
02b.qxp
10/5/06
1:26 PM
Page 62
Replacement Clamps
Warranty: Manufacturers
Professional quality clamps for all booster cables, chargers and testers
Package: 1 pair per see-through display carton
Part No.
Amps
Jaws
Insulation
For Use
With Cable
FlexiSpring
Wt. Per
Master
4C-4940
500
Copper
Bonded Vinyl
3, 4, 6 ga.
Yes
4.0 kg (9 lbs)
4C-4942
800
Bonded Vinyl
1, 2 ga.
Yes
Part. No
Description
4C-5637
4C-5638
Shop Supplies
Warranty: Manufacturers
ID: C33389T1
ID: C33388T1
ID: C33383T1
Power Socket
New stainless steel cabinet resists corrosion
Polarized socket with solid copper contacts
1.5 m (5 ft) connecting cables for service battery hook-up (4 AWG)
Plug-In Cables
Army/Navy Lexan plug wont break in coldest weather
Heavy-duty cables, 7.62 m (25 ft) 4 AWG. Jacket resists oil
and abrasion stays flexible to 4.4C (-40F)
500 Amp insulated clamps with Flexi-Spring cable guards
ID: C80220T1
Service Parts
Part No.
Description
4C-4943
4C-4946
4C-4945
4C-4944
02b.qxp
10/5/06
1:26 PM
Page 63
Power Socket
New stainless steel cabinet resists corrosion
Polarized socket with solid copper contacts
1.5 m (5 ft) connecting cables for service battery hook-up (1 AWG)
Plug-In Cables
Army/Navy Lexan plug wont break in coldest weather
Heavy-duty cables, 7.62 m (25 ft) 1 AWG. Jacket resists oil and abrasion stays flexible to 4.4C (-40F)
800 Amp insulated clamps with Flexi-Spring cable guards
Shop Supplies
Service Parts
Part No.
Description
4C-9917
ID: C33384T1
02b.qxp
10/5/06
1:27 PM
Page 64
Vehicular Caterpillar
Batteries and Worklights
Water Loss: Calcium lead alloy is used on both the positive and negative
plates to reduce gassing. Calcium technology allows for minimal water loss
over the life of the battery.
Corrosion Resistance: Forged terminal post bushings provide maximum
strength and resistance to acid seepage that causes corrosion and black posts.
Thicker internal terminal posts are used for lower electrical resistance and
higher output under starting conditions. Less maintenance is needed because
extra corrosion resistance and overcharge protection are built in.
Flame Arrestor Safety Vents: Built into the manifold cover, they reduce the
possibility of explosion from external sparks. They direct corrosive gases away
from the battery and hold-downs. Allows for remote venting out of the battery
compartment.
Robust Design: Thicker, more robust container resists the demanding, rugged
treatment typical of heavy-duty commercial useespecially in temperature
extremes. The outside of the robust case identifies this as a Caterpillar
Battery. Maintenance Free Flat Top Design allows easy mounting and
power washing no vent caps falling off. Side brickwork and waffle design
on bottom of the case resist punctures. Raised Caterpillar Part Number and
descriptors wont wear off and provide for easy and accurate replacement
by technicians.
Shop Supplies
ID: D01579T1
ID: D00288T1
Application
BCI Group
Size
Part No.
Cold Cranking
Amps (CCA)
Reserve Capacity
(RC) (minutes)
Bus/RV/Concrete Mixers
4D
153-5700
1125
305
Bus/RV/Concrete Mixers
4D
153-5710
1400
425
Bus/RV/Concrete Mixers
8D
153-5720
1500
465
ID: D00136T1
02b.qxp
10/5/06
1:27 PM
Page 65
Vehicular Caterpillar
Batteries and Worklights
Cat Racing Batteries for On-Highway Vehicles - Premium High Output
Maintenance Freestud terminals with accessible cover capability
Designed by Caterpillar to meet demanding performance tests100-hour vibration tested
(5 times the industry standard)
Calcium lead alloy on both positive and negative plates for minimal water loss
36 month prorated warranty (see dealer for details)
Highest CCAs in the industry for deep cycle applications
BCI Group
Size
Part No.
175-4360
710
185
175-4370
825
190
175-4390
1000
180
Application
Shop Supplies
GP31
ID: D01579T1
Cat Batteries for Recreational and Automotive Use - Premium High Output
Maintenance-free design
Designed by Caterpillar to meet demanding performance tests 100-hour vibration tested (5 times the industry standard)
Calcium lead alloy on both positive and negative plates for minimal water loss
72- and 36-month prorated warranties (see dealer for details)
Highest CCAs in the industry for deep cycle applications
Application
BCI Group
Size
Part No.
Cold Cranking
Amps (CCA)
Reserve Capacity
(RC) (minutes)
31
(stud and post terminals)
250-0480
710
185
24
153-5656
650
110
74
(side terminals)
153-5660
650
110
58
175-4280
500
70
65
230-6368
880
140
ID: D01585T1
ID: D01591T1
02b.qxp
10/5/06
1:27 PM
Page 66
Vehicular Caterpillar
Batteries and Worklights
Floodlights
Shop Supplies
Economically priced 3 inch x 3 inch halogen floodlights for use in a wide range
of on-highway truck and recreational vehicle applicationsback-of-cab floodlight
next to the trailer hookup, floodlights inside cargo trailers, floodlights to illuminate
the work site for construction, mixer, and farm trucks
Available in wide- and long-range floodlight patterns
Advanced optical reflector provides light output approaching 5 inch x 5 inch lights
Vertical and suspended mounts with swivel capability (mounting bracket included)
24-Volt (65-watt) or 12-Volt (55-watt)
Halogen bulb serviced with only a screwdriver
Easy to install using sturdy, integral (mounted-in-housing) DT (Deutsch) connectors
Excellent vibration, temperature and moisture resistance for longer life (environmentally
sealedlights must pass Caterpillar design specifications for resistance to water spray,
water dunk, and vibration)
ID: D00106T1
Part #
Volts
Type of Mounting
Description
234-4323
24
Vertical
234-4324
24
Vertical
234-4325
24
Suspended
234-4326
24
Suspended
234-4327
12
Vertical
234-4328
12
Suspended
234-4329
12
Suspended
02b.qxp
10/5/06
1:27 PM
Page 67
Lighting/Electrical Products
ID: D00101T1
Shop Supplies
ID: C41348T1
Item
Part No.
Description
Length
1U-7321
Flashlight
Batteries
2 D cell batteries (replacement lamp 4C-9464)
1U-7322
Flashlight
4C-9442
Flashlight
4C-9446
4C-9447
4C-9448
Mounting Clamp kit for all D cell flashlights, 2 clamps and screws
Description
4C-9470
209-9589
4C-9449
Heavy-Duty Flashlights
Warranty: Manufacturers
Water-resistant, made of high impact plastic, with corrosion resistant
contact parts and a belt ring to prevent loss
Battery barrier protects bulb and head contacts from impact force
Comes with spare bulb
4C-9620 meets military standards
Batteries not included
Part No.
Size
Batteries
Switch
Comes with
ID: C44073T1
1U-7319
2 D cell batteries
1U-7320
3 D cell batteries
4C-9620
2 D cell batteries
ID: C41346T1
02b.qxp
10/5/06
1:27 PM
Page 68
Lighting/Electrical Products
Shop Supplies
ID: C44286T1
ID: C37610T1
ID: D00929T1
Flashlight Bulbs
Warranty: Manufacturers
Part No.
Description
Application
4C-9464
Bulb
4C-9465
Bulb
4C-9466
Bulb
4C-9470
4C-6741
02b.qxp
10/5/06
1:27 PM
Page 69
Lighting/Electrical Products
Industrial Batteries
Warranty: Manufacturers
Alkaline
Size
Alkaline
Pkg.
Pkg.
Qty. Heavy-Duty Qty.
C, 1.5 Volt
1U-9531
72
1U-9536
D, 1.5 Volt
1U-9532
72
1U-9537
72
1U-9533
96
1U-9538
96
9 Volt
1U-9534
72
1U-9539
72
Heavy-Duty
1U-9535
96
245-3224
72
Shop Supplies
ID: D00690T1
Charge capacity
one to four AA NiMH batteries up to 2100 mAh
one to four AAA NiMH batteries up to 750 mAh
Charging current
AA (1-4 cells)
AAA (1-4 cells)
4 amps
1.5 amps
Trickle charge
AA
AAA
50 mA
50 mA
Charging time
AC input
110 Volts
ID: D01245T1
ANSI-1.2H2
Voltage
1.2 Volts
Average capacity
2300 mAh
Quantity
4 per package
ID: D01377T1
02b.qxp
10/5/06
1:27 PM
Page 70
Lighting/Electrical Products
27KA
130V
27KA
400V
Dimensions (L x H x W)
Shop Supplies
ID: D01383T1
Lantern Battery
Warranty: Manufacturers
Offers dependable high performance for portable lighting uses
Recommended for all industrial lanterns
Part No.
Description
Pkg.
Qty.
1U-9547
12
ID: D00696T1
02b.qxp
10/5/06
1:27 PM
Page 71
Lighting/Electrical Products
ID: C34488T1
ID: C34487T1
Part No.
Length
Cord Type
Voltage/Watt
4C-6477
SJTO 18/2
110V/13 Watt
Std. Color
Yellow
4C-6478
15.24 m (50 ft) Cord
Vapor Clamps and Mag Mount
SJTO 18/2
110V/13 Watt
Yellow
4C-6479
12.19 m (40 ft) Reel
Vapor Clamps and Mag Mount
SJT 18/2
110V/13 Watt
Yellow
9U-7203
9.5 m (30 ft) Cord
Lighter Plug
SJTOW-A 18/2
12V/13 Watt
Yellow
Description
9U-6712
9U-6708
9U-6709
Switch Assembly
ID: C44285T1
ID: C44293T1
ID: C41469T1
Shop Supplies
ID: C34486T1
02b.qxp
10/5/06
1:27 PM
Page 72
Lighting/Electrical Products
Shop Supplies
Replacement Parts
Part No.
Description
9U-6009
9U-6708
9U-6709
Switch Assembly
9U-6711
Ballast
9U-6714
ID: C54473T1
ID: C79853T1
120 Volt/60 Hz light (yellow) includes shatter/scratch resistant lens, 10 amp tool-tap-plug, and velcro magnet
10,000 hour life, 13 Watt rough service fluorescent bulb delivers output of a 60 Watt incandescent bulb
Black reel made from shatter resistant ABS plastic
Cord is 15.2 m (50 ft) long, made from 16/3 wire
STOW type cord used for heavy duty service and with oil-resistant, thermoplastic jacket,
is weather resistant for outdoor use
Two year warranty on workmanship and material defects (not including bulb)
179-7048 Lens, 179-7049 Bulb, and 179-7050 Velcro Magnet also sold separately
UL Approved
ID: C79854T1
120 Volt/60 Hz light includes shatter/scratch resistant lens, 10 amp tool-tap-plug, and velcro magnet
10,000 hour life, 13 Watt rough service fluorescent bulb delivers output of a 60 Watt incandescent bulb
Yellow case is made from unbreakable aerospace plastic
Cord is 7.62 m (25 ft) long, made from 16/3 wire
STOW type cord Used for heavy duty service and with oil-resistant, thermoplastic jacket,
is weather resistant for outdoor use
Two year warranty on workmanship and material defects (not including bulb)
179-7048 Lens, 179-7049 Bulb, and 179-7050 Velcro Magnet also sold separately
UL Approved
ID: C79855T1
02b.qxp
10/5/06
1:27 PM
Page 73
Lighting/Electrical Products
ID: C79856T1
Shop Supplies
120 Volt/60 Hz light has large, shock-absorbent, easy-grip end caps and a scratch/shatter resistant lens
10,000 hour life, 13 Watt rough service fluorescent bulb delivers output of a 60 Watt incandescent bulb
Unique plug base converts any extension cord into a light
Two year warranty on workmanship and material defects (not including bulb)
179-7049 Bulb and 179-7055 Tube Assembly also sold separately
UL Approved
ID: C79857T1
120 Volt/60 Hz light includes large, shock-absorbent, easy-grip end caps, and a scratch/shatter resistant lens
15 Watt rough service fluorescent bulb delivers output of an 80 Watt incandescent bulb
Cord is 7.62 m (25 ft) long, made from 18/2 wire
STOW type cord Used for heavy duty service and with oil-resistant, thermoplastic jacket,
is weather resistant for outdoor use
Two year warranty on workmanship and material defects (not including bulb)
179-7057 Lens and 179-7058 Bulb also sold separately
UL Approved
ID: C79858T1
02b.qxp
10/5/06
1:27 PM
Page 74
Lighting/Electrical Products
Underwriters Laboratories
Canadian Underwriters Laboratories
Office of Safety and Health Administration
National Electrical Manufacturers Association
S
J
E
W
O
Watertight cord
Oil resistant
A
T
Low-temperature rated
Thermo-grade plastic
Shop Supplies
ID: C79360T1
Rating
Voltage
rating
Operating
temperature
12 gauge,
3 conductor
SJTOW
300 volts
-35 to 60C
(-31 to 140F)
triple
12 gauge,
3 conductor
SJTOW
300 volts
-35 to 60C
(-31 to 140F)
triple
10 gauge,
3 conductor
SJTOW
300 volts
-35 to 60C
(-31 to 140F)
Item
Part No.
Length
Material
Outlet
241-8522
241-8529
241-8530
25 ft
50 ft
100 ft
all-weather vinyl
single
243-1874
243-1875
243-1876
25 ft
50 ft
100 ft
all-weather vinyl
243-1877
243-1878
243-1879
25 ft
50 ft
100 ft
all-weather vinyl
1 (S)
Wire
size
Hard Surface, Flexible Cord, General Use; (J) 300 Volt cord or smaller; (E) Elastic Synthetic Rubber, Good Low Temperature Cord;
(W) Watertight Cord; (O) Oil Resistant; (A) Low Temperature Rated; (T) Thermo Grade Plastic
02b.qxp
10/5/06
1:27 PM
Page 75
Lighting/Electrical Products
Description
9U-6362
9U-6363
9U-6364
9U-6365
9U-6366
9U-6367
9U-6368
9U-6369
9U-6362
9U-6363
9U-6364
9U-6365
9U-6369
9U-6366
9U-6367
9U-6368
Straight Blade Plugs and Connectors (15-20 Amp)
ID: C66955T1
9U-6370
9U-6371
9U-6372
Part No.
Type
9U-6370
Description
2 Pole, 3 Wire, Grounded NEMA L5-15
9U-6371
9U-6372
9U-6373
9U-6373
Heavy-Duty Connectors and Plugs (20-30 Amps) with Insulating Cord Grip
Part No.
Type
Description
Cord Diameter
9U-6374
9U-6375
9U-6376
9U-6377
9U-6378
9U-6379
9U-6380
9U-6381
ID: C55023T1
Shop Supplies
Part No.
02b.qxp
10/5/06
1:27 PM
Page 76
Lighting/Electrical Products
Miscellaneous
Miscellaneous
4C-6393 Rubber Splicing Compound
Shop Supplies
Linerless rubber tape, 19 mm (34 in) wide X .8 mm (.030 in) thick X 4.6 m (15 ft) long rolls
Use for insulating and sealing on electrical cable installation and repair
1 roll per package
ID: C34419T1
Description
8T-5209
Tape No. 0
8T-5211
Tape No. 1
8T-5212
Tape No. 2
8T-5213
Tape No. 3
8T-5214
Tape No. 4
8T-5215
Tape No. 5
8T-5216
Tape No. 6
8T-5217
Tape No. 7
8T-5218
Tape No. 8
8T-5219
Tape No. 9
ID: C34414T1
Crimping Tools
For insulated and uninsulated ferrules
Part No.
Wire Gauge
139-2788
24-12 AWG
139-2789
10-6 AWG
ID: D01573T1
Expanded I.D.
Recovered I.D.
Recovered Length
Pkg Qty.
4C-6387
10 mm (.400 in)
152 mm (6 in)
25
4C-6388
20 mm (.800 in)
152 mm (6 in)
4C-6389
28 mm (1.10)
229 mm (9 in)
4C-6390
229 mm (9 in)
4C-6391
51 mm (2.00 in)
229 mm (9 in)
ID: C34420T1
02b.qxp
10/5/06
1:27 PM
Page 77
Lighting/Electrical Products
Miscellaneous
Seamless
Butt Connector
Application Procedure
ID: C41518T1
Wire
Barrel
L
I.D.
Color
Pkg
Qty.
4C-6394
#22 to 18 AWG
.28
.062
Red
100
4C-6395
#16 to 14 AWG
.30
.095
Blue
100
4C-6396
#12 to 10 AWG
.38
.142
Yellow
100
Shop Supplies
Part No.
ID: D01341T1
Application Procedure
1. Slip correct size cold shrink insulator over cable to be spliced.
2. Splice the cable.
3. Unwind the expander core by pulling the insulator over the splice and center.
4. Pull expander core from the cold shrink tubing. Insulator will seal splice.
Part No.
Diameter Min.
Tube Max.
Relaxed Pkg.
Length
4C-6382
203 mm (8 in)
4C-6383
203 mm (8 in)
4C-6384
229.0 mm (9 in)
4C-6385
4C-6386
Qty.
ID: C44101T1
02b.qxp
10/5/06
1:27 PM
Page 78
Personal/Safety
First Aid
First Aid
First Aid Kits
SMCS Code: 0000
Model: All
Shop Supplies
Small, portable kits for service trucks, tool boxes, or for personal use in family home, car, camper, or boat
Soft shell case made of water resistant nylon
Uses Book Style construction with zippered internal compartments (makes it easy to access items)
ID: C78540T1
ID: C78544T1
Size
Scissors
Tweezers
76.2 mm (3 in)
Quantity
150-1579 Contents
Description
Size
Quantity
Scissors
152.4 mm (6 in)
Cloth bandaids
10
5
Bandaids
20
Alcohol swabs
Knuckle bandaids
Wet wipes
Alcohol swabs
18
Wet wipes
Antiseptic swabs
12
Adhesive tape
Antiseptic swabs
16
Adhesive tape
50.8 mm (2 in)
101.6 mm (4 in)
1
2
Triangular bandage
Safety pins
Triangular bandage
Vinyl gloves
1 pair
Safety pins
Acetaminophen
1 (2 per pack)
Vinyl gloves
1 pair
Multi-purpose pad
Tensor bandage
50.8 mm (2 in)
02b.qxp
10/5/06
1:27 PM
Page 79
Personal/Safety
First Aid
Contents
163-0798
25-person
163-0799
50-person
Adhesive Strips, 34 in x 3 in
50
100
Alcohol Wipes
10
20
Ammonia Inhalants
Combine Pad, 5 in x 9 in
Disposable Gloves
1 pr
2 pr
Gauze Pads, 4 in
Gauze Pads, 3 in
Triangular Bandage
Gauze Bandage, 2 in x 5 yd
Gauze Bandage, 4 in x 5 yd
Elastic Bandage, 2 in
Scissors
Tweezers
Shop Supplies
ID: C44240T1
02b.qxp
10/5/06
1:27 PM
Page 80
Personal/Safety
Shop Supplies
ID: D00238T1
Disposable Plugs
European Union Compliant, CE marked
Description
Quantity
260-4783
260-4785
ID: D00250T1
Description
233-8585
Rad Band
233-8586
Replacement Plugs
ID: D00262T1
02b.qxp
10/5/06
1:27 PM
Page 81
Personal/Safety
Consists of
Description
233-8580
Glasses
233-8587
Ear Muffs
ID: D00256T1
ID: D00268T1
Hard hat-mounted ear muffs feature large, lightweight ear cups that attach
to a variety of hard hats for convenience
Recommended for moderately high noise situations (up to 95 dBA TWA)
Noise reduction rating: 23 dB
Package quantity: 2 pair muffs
ID: C80270T1
ID: D00184T1
ID: C80272T1
ID: C80266T1
Shop Supplies
Package
Quantity
Part No.
02b.qxp
10/5/06
1:27 PM
Page 82
Personal/Safety
Replacement Filters
236-6598 Organic Vapor Cartridge
Shop Supplies
ID: D00282T1
ID: D01567T1
ID: C80261T1
ID: D01209T1
ID: C34434T1
02b.qxp
10/5/06
1:27 PM
Page 83
Personal/Safety
Type
Use For:
1U-8098
1U-8097
1U-8209
1U-8097
1U-8101
1U-8100
1U-8099
1U-8097
1U-8102
1U-8100
1 Shade
5 lens used for medium to heavy gas torch cutting [25 mm (1 in)
and up] and light to medium gas torch welding [up to 13 mm (12 in)]
2 Shade
needed, one inside and one outside of your tinted glass lens
ID: C41322T1
ID: C44001T1
Description
1U-8106
1U-8107
1 Shade
Welding Jacket
Made of flame resistant, sturdy 269 g (9 oz) sateen fabric treated for permanent fire retardant
Finished in a dark green color
Lightweight and provides excellent protection from flash, flame, and sparks
Black no-glare snaps
Adjustable snaps at the cuff
Part No.
Description
Size
Roll collar can be turned up
1U-6586
Welding Jacket
Large
Flame retardant good up to 50 washes in mild soap
1U-6587
Welding Jacket
Extra Large
ID: C41311T1
Shop Supplies
3 Two
ID: C44003T1
02b.qxp
10/5/06
1:27 PM
Page 84
Personal/Safety
Shop Supplies
ID: C41312T1
30 inch leather jacket with raglan shoulder design for utmost mobility
Double stitched seams with 5 ply Kevlar thread provide superior strength
Multiple position snap adjustment provides maximum protection and comfort
Roll-up collar with three-snap adjustment
Locker handling loop, soap stone shoulder pocket, and inner leather pocket
Part No.
Description
185-0151
Chest Size
44 inch to 46 inch
185-0152
48 inch to 50 inch
Welding Blanket
Warranty: Manufacturers
Dimensions
4C-9616
Blanket
4C-9617
Blanket
4C-9618
Blanket
ID: C44239T1
ID: C41308T1
02b.qxp
10/5/06
1:27 PM
Page 85
Personal/Safety
Safety Glasses
Polycarbonate lens
Universal bridge, plastic frame
Meet ANSI Z87.1-1979
Part No.
Pkg.
Qty.
Lens
Type
Frame
Color
Size
Lens
Features
4C-8093
10
Clear
Mocha
54
4C-4120
10
Clear
Mocha
58
4C-8351
10
Gray
Mocha
58
ID: C41217T1
Safety Glasses
European Union Compliant, CE marked
Part No.
Lens
Type
233-8576
233-8577
Clear
233-8578
233-8579
Gray
ID: D00190T1
Safety Glasses
European Union Compliant, CE marked
Part No.
Lens Type
233-8580
249-7265
Shop Supplies
02b.qxp
10/5/06
1:27 PM
Page 86
Personal/Safety
Safety Glasses
European Union Compliant, CE marked
5-position ratchet and 4-position telescoping temples
Stylish one-piece lens with shields
Hard-coated lenses
99.9% UVA and UVB protection
Meets or exceeds all ANSI, CSA,
Lens
and CE specifications
Part No.
Type
Package quantity: 1
239-1079
Clear
Shop Supplies
Frame
Black
239-1082
Clear
Yellow/black
239-1083
Gray
Black
239-1084
Gray
Yellow/black
233-8581
Blue
Mirror-black
233-8582
Blue
Mirror-yellow/black
ID: D00286T1
Popular aviator-style frames with clear or gray tinted polycarbonate lenses and side shields
Fold-flat frame design has 58 mm (2.3 in) lens size and 150 mm (6 in) temple length
Nose pad is adjustable and constructed of soft, pliable PVC
Side shields are permanently attached
Temples are made of brass alloy for easy adjustment
Impact resistant lenses meet ANSI Z87.1-1989
Package quantity: 1 pair
Part No.
Frame Color
Lens Tint
262-4864
Black
263-0858
Gold
Gray
Clear
263-0868
Black
Clear
ID: D00673T1
ID: D01611T1
02b.qxp
10/5/06
1:27 PM
Page 87
Personal/Safety
ID: C79647T1
Frame Color
139-2645
Black
Lens Tint
Clear
139-2648
Black
Gray
139-2650
Yellow/Black
Mirror Gray
139-2651
Black
Mirror Gray
Replacement Lens
Part No.
Lens Tint
139-2670
Clear
139-2671
Gray
139-2672
Mirror Gray
Provide optimal lateral coverage on medium to large frames with lens measuring 42 to 51 mm (1.65 to 2 in) in height
Semicircle configuration provides enhanced coverage that shields eye from impact and airborne foreign bodies
Patented design allows simple attachment or removal without tools in less than one minute
Easily replaces most original equipment side shields
Each universal side shield dispensing unit contains 20 pair of side shields and 20 care
and mounting instructions to assist and inform first time users
Dispensing units can be placed at strategic locations for convenience of employees or visitors
Made from molded high-impact polycarbonate
OSHA compliant and meets ANSI Z87.1-2003
UV shield barrier protects against harmful UV radiation
Package quantity: 20 pair
ID: D00667T1
Shop Supplies
Part No.
02b.qxp
10/5/06
1:27 PM
Page 88
Personal/Safety
Shop Supplies
ID: D00196T1
ID: D00292T1
ID: D01407T1
ID: D01257T1
May be used on safety glasses, face shields, goggles, and full face respirators
Economical lens cleaning station provide lens cleaning needs in shop or office
Promotes proper lens cleaning, extending life of safety glasses
Specially formulated solution cleans greasy and oily glasses while providing an anti-fog/anti-static coating
Low lint non-abrasive tissues leave lenses clear and streak free
Easily mounted on wall or table top
Each station contains 8 oz. anti-fog/anti-static solution and 600 low lint, non-abrasive tissues
ID: D01263T1
02b.qxp
10/5/06
1:27 PM
Page 89
Personal/Safety
Hard Hats
Warranty: Manufacturers
Replaces canceled 173-1941 Protective Hard Hat, White and 173-1942 Protective Hard Hat, Yellow
High density, polyethylene protective hard hats with Cat logo
Self-sizing, four-point suspension with brow pad
Rain trough brim provides extra protection against snow, rain, dust, and dirt
Accessory slots provide attachment points for earmuffs, face shields, flashlights, etc
239-4964 and 239-4966 meets or exceeds ANSI Z89.1-1997 Standard for Industrial Head Protection,
Type 1, Class E, helmet requirements
239-4965 and 239-4967 meets or exceeds EN 397:1995 Amendment (A1 2000 Standard)
for Industrial Safety Helmets, Optional Classes -20 degrees C, 440 VAC requirements
ID: D00385T1
Description
239-4964
239-4965
239-4966
239-4967
ID: C44021T1
Headgear has precision ratchet head size adjustment for a comfortable snug fit
Floating window suspension distributes weight and reduces shock of impact
Five position pinlock crown band provides additional adjustment for proper support and a firm fit
Crown protector made of a new high-performance thermoplastic offers excellent impact resistance
over a wide range of temperatures
Soft vinyl headband to cushion the forehead
Packaged individually
ID: C41219T1
ID: C41220T1
Shop Supplies
Part No.
02b.qxp
10/5/06
1:27 PM
Page 90
Personal/Safety
Shop Supplies
ID: C80586T1
Description
1U-8096
4C-4404
Safety Vests
262-9301 Lime Green Mesh Safety Vest
02b.qxp
10/5/06
1:27 PM
Page 91
Personal/Safety
Tyvek Coveralls
Size
Qty.
Small
Medium
Large
267-8542
X Large
267-8543
XX Large
267-8544
XXX Large
267-8545
XXXX Large
Rain Jacket
Yellow rain jacket with a detachable hood and two patch pockets
Full snap front
Inner storm fly prevents rain and debris from penetrating front opening
Corduroy collar
Raglan sleeves for maximum mobility (a raglan sleeve is attached to a garment body
at a 45 degree angle helping it to stretch from neckline to underarm)
Take-up snaps at cuff
Back yoke ventilation
Rain Pants
Yellow rain pants with fly front overall and pockets with flaps
Fabric/elastic suspender and elastic waist band
Take-up snaps at ankle
ID: D00790T1
Rain Jacket
Part No.
Chest Size
263-0876
263-0888
263-0967
Part No.
Waist Size
263-0875
263-0882
263-0895
Rain Pants
Shop Supplies
ID: D00697T1
02b.qxp
10/5/06
1:27 PM
Page 92
Personal/Safety
Shop Supplies
Part No.
Size
276-0491
Medium
276-0492
Large
276-0493
Extra Large
276-0494
XX Large
ID: D01237T1
Impact Gloves
Warranty: Manufacturers
Part No.
Size
276-0499
Medium
276-0500
Large
276-0501
Extra Large
276-0502
XX Large
ID: D01231T1
Insulated Gloves
Warranty: Manufacturers
Part No.
Size
276-0495
Medium
276-0496
Large
276-0497
Extra Large
276-0498
XX Large
ID: D01225T1
Fingerless Gloves
Warranty: Manufacturers
ID: D01219T1
Part No.
Size
276-0487
Medium
276-0488
Large
276-0489
Extra Large
276-0490
XX Large
02c.qxp
10/5/06
1:27 PM
Page 93
Personal/Safety
Size
Quantity
246-5141
Medium
Single pair
246-5143
Large
Single pair
246-5145
Extra Large
Single pair
246-5142
Medium
Bulk - 12 pair
246-5144
Large
Bulk - 12 pair
246-5146
Extra Large
Bulk - 12 pair
ID: D00838T1
Part No.
Size
Quantity
246-5151
Medium
Single Pair
246-5149
Large
Single Pair
246-5147
Extra Large
Single Pair
246-5152
Medium
Bulk - 12 Pair
246-5150
Large
Bulk - 12 Pair
246-5148
Extra Large
Bulk - 12 Pair
ID: D00844T1
Part No.
Size
Quantity
Part No.
Size
Quantity
246-5153
Large
Single Pair
246-5155
Large
Single Pair
246-5154
Large
Bulk - 12 pair
246-5156
Large
Bulk - 12 Pair
ID: D00850T1
ID: D01155T1
Shop Supplies
ID: D00832T1
02c.qxp
10/5/06
1:27 PM
Page 94
Personal/Safety
Shop Supplies
Part No.
Size
Quantity
246-5159
Medium
Single Pair
246-5157
Large
Single Pair
246-5161
Extra Large
Single Pair
246-5160
Medium
Bulk - 12 Pair
246-5158
Large
Bulk - 12 Pair
246-5162
Extra Large
Bulk - 12 Pair
ID: D00856T1
ID: D00868T1
Jersey Gloves
For general purpose use
Soft knit fabric
Stretch to provide excellent fit
Part No.
Size
Quantity
246-5165
Large
Single Pair
246-5166
Large
Bulk - 12 Pair
ID: D00874T1
Fleeced Gloves
Part No.
Size
Quantity
246-5167
Large
Single Pair
246-5168
Large
Bulk - 12 Pair
ID: D00880T1
ID: D00862T1
Part No.
Size
Quantity
185-0153
Medium
Bulk - 12 Pair
247-4447
Large
Single Pair
247-6410
Large
Bulk - 12 Pair
02c.qxp
10/5/06
1:27 PM
Page 95
Personal/Safety
Quantity
Application
Chemical Resistance
4C-5522
Bulk - 6 Pair
Chemical Handling
Acids, Solvents, Caustics
Oils, Grease, Degreasing
Machine operations using
cutting oil, metal fabrication
4C-5523
10
Bulk - 6 Pair
Chemical Handling
Acids, Solvents, Caustics
Oils, Grease, Degreasing
Better protection than
4C-5522 due to thickness.
Shop Supplies
Part No.
ID: D00904T1
Part No.
Size
Quantity
Application
4C-5526
Large
12 pair
per package
Chemical
Resistance
Oil, Grease
Size
Quantity
Application
Chemical Resistance
4C-5527
Acids, Solvents,
(Ex.: Glycol Ether), Oils,
Caustics, Soaps, Alcohols
ID: D00910T1
02c.qxp
10/5/06
1:27 PM
Page 96
Personal/Safety
Shop Supplies
NOTE: When using gloves as Personal Protection Equipment (PPE), always consult the
Material Safety Data Sheet (MSDS) for the chemical that is being handled for the most appropriate glove.
Part No.
Size
Quantity
Application
Chemical Resistance
4C-5529
Single Pair
Acids, Solvents,
(Ex: Glycol Ether),
Oils
ID: D00898T1
Caustics, Soaps, Alcohols
Part No.
Description
Size
260-1776
Powdered
Small
259-7005
Powdered
Medium
246-5179
Powdered
Large
259-7006
Powdered
Extra Large
260-1802
Powder-Free
Small
259-7007
Powder-Free
Medium
246-5180
Powder-Free
Large
259-7008
Powder-Free
Extra Large
ID: D00916T1
Part No.
Size
260-1777
Small
260-1778
Medium
246-5181
Large
260-1779
Extra Large
ID: D00922T1
ID: D00928T1
Part No.
Size
Quantity
247-6412
Large
Single Pair
247-6413
Extra-Large
Single Pair
247-4449
Large
Bulk - 12 Pair
247-4450
Extra-Large
Bulk - 12 Pair
02c.qxp
10/5/06
1:27 PM
Page 97
Personal/Safety
Padlocks
Padlocks
285-1145 Combination Padlock
Combination-type
resettable
Combination-type
fixed
Lock mechanism
4-digit dialing
Lock mechanism
3-digit dialing
Body width
50.8 mm (2 in)
Body width
Shackle diameter
Shackle diameter
Horizontal shackle
25.4 mm (1 in)
Horizontal shackle
Vertical shackle
25.4 mm (1 in)
Vertical shackle
19 mm (34 in)
ID: D01912T1
Pin tumbers
Package quantity
Body width
Pin tumbers
Shackle diameter
Body width
Shackle diameter
Horizontal shackle
Vertical shackle
20.64 mm
(1316
22.26 mm
(78
in)
in)
Horizontal shackle
Vertical shackle
ID: D01924T1
ID: D01918T1
Lock body and shackle black with Cat logo on both sides of bumper,
Cat part number on side of bumper
Pin tumbers
Body width
Shackle diameter
Horizontal shackle
Vertical shackle
ID: D01930T1
ID: D01936T1
Package quantity
Pin tumbers
Body width
Shackle diameter
Horizontal shackle
Vertical shackle
Shop Supplies
ID: D01906T1
Personal/Safety
Shop Supplies
Exclusive micro-webs absorbs up to 100% more oil than other leading melt-blown oil absorbents
Improved absorbency means more liquid pickup, with less product, which can result in lower costs for the user
Very little lint to minimize contamination
One bale picks up an average of 25 gallons of oil
Comes as one bale of 50, 43.2 x 48.3 cm (17 x 19 in) pads
Supplier-branded product
ID: C41257T1
Absorbent Socks
Warranty: Manufacturers
Tubular absorbent socks absorb and contain leaks and spills around machinery
(hydraulic oil, coolants, non-aggressive fluids, water, and even hazardous fluids,
such as PCB oils and solvents)
Superior diking and damming capability (hugs the floor, creating an effective barrier or dike
that holds back fluids, in emergency situations, even after total absorption)
Used primarily for everyday housekeeping around machines that leak, seep, or spill fluids
Fits snugly against machine bases and wrap-around corners, keeping work area safe and dry
Fine-grade vermiculite filler (non-biodegradable) quickly soaks up leaks and drips
Durable, stitch-bonded polypropylene skin improves strength
Self-contained, no messy cleanup (no loose absorbents to spread,
Quantity
sweep, scatter, shovel, or track around)
Part No.
Per Box
Reusable for water spills only
235-0844
40
Meets OSHA regulation 29 CFR 1910.22(a)(2) for dry and clean
workplace floors
254-3969
8
Material Safety Data Sheets (MSDS) available
Supplier-branded product
ID: D00476T1
Absorption
Per Box
Absorption
Per Sock
Size
Shipping
Weight
75 mm (3 in) diameter x
121 cm (48 in) long
57 l (15 gal)
23 kg (50 lbs)
75 mm (3 in) diameter x
3 m (10 ft) long
11 kg (25 lbs)
Reference
NELG5036
Absorbent Pillows
Warranty: Manufacturers
Absorbent pillow soaks up small to medium-size spills of oil and other non-aggressive fluids (works best once a spill has been contained)
Fast, effective way to control leaks
Use only as many as required (pillow's large surface area and superior wicking ability speeds cleanup time)
High absorption/fast-wicking cellulose fibers begin to work when pillow contacts liquid and continue until fully saturated
Strong, polypropylene cover will not tear when handling
Easy cleanup (simply pick up and place into proper disposal container)
Meets OSHA regulation 29 CFR 1910.22(a)(2) for dry and clean workplace floors
Material Safety Data Sheets (MSDS) available
Supplier-branded product
Reference
NELG5036
Part No.
Quantity
Per Box
Absorption
Per Box
Absorption
Per Sock
235-0845
40
76 l (20 gal)
193-0768
14
53 l (14 gal)
ID: D01413T1
Size
Shipping Weight
25 x 25 x 5 cm (10 x 10 x 2 in)
10 kg (23 lbs)
3.7 l (1 gal)
02c.qxp
10/5/06
1:27 PM
Page 99
Personal/Safety
Heavyweight Absorbent Material for Most Oil, Water-Based Fluids, and Chemicals
Warranty: Manufacturers
Part No.
Description
Quantity
per Box
Absorption
per Box/Roll
Absorption
per Pad
235-0847
Absorbent Roll
1 roll
235-0848
Absorbent Pad
100 pads
235-0865
Absorbent Pad
235-0866
ID: D00483T1
ID: D01371T1
Size
Ply
Shipping
Weight
14 kg (30 lbs)
91 l (24 gal)
41 x 51 cm
(16 x 20 in)
9 kg (19 lbs)
100 pads
80 l (21 gal)
43 x 48 cm
(17 x 19 in)
8 kg (17 lbs)
Absorbent Pad,
non-branded product
100 pads
80 l (21 gal)
43 x 48 cm
(17 x 19 in)
8 kg (17 lbs)
235-0867
Absorbent Roll
1 roll
15 kg (34 lbs)
235-0868
Absorbent Roll,
non-branded product
1 roll
15 kg (34 lbs)
261-0114
Absorbent Mat
1 roll
5 kg (11 lbs)
Formaldehyde
Gasoline
Glycol Ether
Hexane
Hydrazine
Anhydrous
Hydrochloric Acid (37%)
Hydrogen Peroxide (30%)
Hydrofluoric Acid (48%)
Isopropanol
Jet Fuel (JP-5)
Kerosene
Methanol
Methyl Ethyl Ketone
Mineral Oil
Mineral Spirits
Naphtha
Nitric Acid (70%)
Nitric Acid fuming (90%)
Nitrobenzene
Perchloroethylene
Phenol
Potassium Hydroxide 50%
Propylene Glycol
Sodium Hydroxide (50%)
Styrene
Sulfuric Acid (50%)
Sulfuric Acid (98%)
Tetrachloroethylene
Tetrahydrofuran
Thionyl Chloride
Toluene
1, 1, 1-Trichloroethane
Trichloroethylene
Triethylamine
Turpentine
Water
Shop Supplies
Heavyweight, gray, absorbent material designed to absorb chemicals, solvents, oils, coolants, petroleum products,
water, water-based fluids, and even acids and bases
Multiple uses in maintenance, repair, and operating (MRO) areas; cover areas prone to overspray and spills, leaving
a cleaner, safer work area; ideal for heavy, concentrated machine leaks and large, spreading spills; keep floors
and walk areas safer by absorbing leaks, spills, drips, and overspray
Dark gray color hides dirt and grime of foot traffic
Thin profile slides into hard-to-reach areas
Made from flame-resistant material which can be used around spark-prone areas, such as welding or grinding equipment
Material will not degrade or have a chemical reaction to a wide variety of chemicals and strong solvents
Absorbs 10 times its weight, reducing material purchase and disposal costs
Dimple design helps absorb more liquid in less time (material retains liquid, even when fully saturated)
Roll material cuts easily with scissors or razor knife easily shaped to fit virtually any area
Material: 100% polypropylene
Multiple layers are held together with thermal bond points for added strength
and durabilitywill not fall apart or leave behind residue, even when fully saturated
235-0848 is packaged in convenient, easy-to-carry dispenser box
Meets OSHA regulation 29 CFR 1910.22(a)(2) for dry and clean workplace floors
Material Safety Data Sheets (MSDS) available
Supplier-branded product unless otherwise indicated
02c.qxp
10/5/06
1:27 PM
Page 100
Personal/Safety
Shop Supplies
61 cm (24 in)
Weight
Material
100% polypropylene
Ply
ID: D01365T1
ID: D00489T1
Part No.
Description
Quantity
per Box
Absorption
per Box/Roll
Absorption
per Pad
Shipping
Weight
235-0850
1 roll
Ply
Color
14 kg (30 lbs)
White
235-0853
50 pads
45 l (12 gal)
41 x 51 cm
(16 x 20 in)
4 kg (9 lbs)
White
235-0869
100 pads
76 l (20 gal)
43 x 48 cm
(17 x 19 in)
8 kg (17 lbs)
White
235-0870
100 pads
76 l (20 gal)
43 x 48 cm
(17 x 19 in)
8 kg (17 lbs)
White
235-0871
1 roll
15 kg (34 lbs)
White
235-0872
1 roll
15 kg (34 lbs)
White
Size
02c.qxp
10/5/06
1:27 PM
Page 101
Personal/Safety
Lightweight, gray, absorbent mat designed to cover areas prone to overspray and spills, leaving a cleaner, safer work area
Ideal for light machine overspray and small, annoying leaks of oils, coolants, solvents, and water
Great for day-to-day housekeeping and repair work
Cross roll perforations easily and quickly tear to any size sheet, as small as 25 x 61 cm (10 x 24 in)
Works well in narrow walkways
Multiple layers are held together with thermal bond points for added strength
and durabilitywill not fall apart or leave behind residue
Absorbs 10 times its weight, reducing purchase and disposal costs
Dark gray color hides dirt and grime
Dimple design absorbs more liquid in less time and greater liquid retention holds liquid even when roll is saturated
Meets OSHA regulation 29 CFR 1910.22(a)(2) for dry and clean workplace floors
Material Safety Data Sheets (MSDS) available
Supplier-branded product
1 roll
ID: D00482T1
Size
Material
100% polypropylene
Ply
Shipping weight
11 kg (23 lbs)
ID: D01101T1
ID: D01113T1
Shop Supplies
02c.qxp
10/5/06
1:27 PM
Page 102
Personal/Safety
Shop Supplies
Consist
Qty.
Reorder
Part No.
235-0844
28
235-0848
ID: D01425T1
Consist
Qty.
Reorder
Part No.
235-0844
254-3969
52
235-0865/235-0848 1
10
235-0845
56
235-0859
Nitrile gloves
Safety goggles
233-8583
Disposable boots
Instruction manual
1 Equivalent
ID: D01419T1
02c.qxp
10/5/06
1:27 PM
Page 103
Personal/Safety
Qty.
Reorder
Part No.
235-0844
235-0845
Nitrile gloves
Safety goggles
233-8583
Shop Supplies
Consist
ID: D01437T1
Consist
Qty.
Reorder
Part No.
235-0844
254-3969
235-0845 or 193-0768 1
235-0848
Tamper-proof labels
Instructions
1 Equivalent
ID: D01443T1
Personal/Safety
Highly absorbent materialcleans up oil, grease, water, and other messy fluids
Strong and abrasion-resistantresists tearing even when wet
Offers a low-lint alternative
Economical alternative to shop rags or towels
Size
31.75 x 33.02 cm (12.5 x 13 in)
Soft cloth-like feel
Color
White
Shop Supplies
Quantity
ID: D01699T1
Highly absorbent materialcleans up oil, grease, water, and other messy fluids
Soft cloth-like feel
Strong and abrasion-resistantresists tearing even when wet
Offers a low-lint alternative in a handy pop-up container
Part No.
Size
Color
Quantity
288-4210
White
288-4211
Blue
ID: D01705T1
Color
White
Quantity
ID: D01687T1
02c.qxp
10/5/06
1:27 PM
Page 105
Personal/Safety
Color
White
Quantity
ID: D01711T1
Shop Supplies
ID: D00970T1
Size
Color
white
ID D00964T1
Personal/Safety
Shop Supplies
Size
Color
white
ID: D00952T1
Wiper Size
Color
Quantity
267-6535
23.1 x 42.7 cm
(9.1 x 16.8 in)
white
267-6536
23.1 x 42.7 cm
(9.1 x 16.8 in)
blue
ID: D01207T1
02c.qxp
10/5/06
1:27 PM
Page 107
Personal/Safety
ID: D01822T1
Description
Usage
1U-5432
269-3368
ID: D01251T1
Excellent absorbency
Perfect to use on grease or oil
Low-lint, 100% polypropylene construction
Good for cleaning and disinfecting surface
Stands up well to spirits and solvents
Use with 1U-5432 Paper Wiper Dispenser
Size
Quantity
ID: D00976T1
Shop Supplies
ID: D01822T1
Part No.
02c.qxp
10/5/06
1:27 PM
Page 108
Personal/Safety
Miscellaneous
Shop Supplies
Miscellaneous
263-0884 Paper Cups
122 x 183 cm
(48 x 72 in)
Quantity
ID: D00982T1
ID: D01185T1
Quantity
100 per box
ID: D01942T1
Rugs
Description
Size
159-5155
Rug
Absorbent Capacity
121 l (32 gal) per roll
159-5160
Rug (Coated)
Size
4C-8102
51 x 76 cm (2 ft x 3 ft)
4C-8103
76 x 127 cm (3 ft x 5 ft)
ID: C41221T1
02c.qxp
10/5/06
1:27 PM
Page 109
Personal/Safety
Miscellaneous
Size
4C-8104
Unit
Center
4C-8105
End
4C-8106
Center
4C-8107
End
ID: C41222T1
Shop Supplies
4C-8118
61 cm x 18.3 m (2 ft x 60 ft)
4C-8119
4C-8120
4C-8121
ID: C41223T1
Part No.
Size
4C-8112
61 cm x 91.4 cm (2 ft x 3 ft)
4C-8113
4C-8114
61 cm x 18.3 m (2 ft x 60 ft)
4C-8115
Size
4C-8108
4C-8109
4C-8110
4C-8111
ID: C41224T1
02c.qxp
10/5/06
1:27 PM
Page 110
Personal/Safety
Miscellaneous
Used to remove dirt and contamination from shoes, wheels, and other passing
138-3852
objects keeps dirt and grease from being tracked into office area
138-3855
Comes in three sizes
138-3856
Provides an inexpensive way to keep carpets and office areas clean
Ideal for shop-to-office, paint, or cleaning areas
Mat has 30 peelable layer, providing a fresh cleaning surface with each exposed layer
Size
457.2 mm x 914.4 mm (18 x 36 in)
457.2 mm x 1143 mm (18 in x 45 in)
609.6 mm x 1143 mm (24 in x 45 in)
Shop Supplies
ID: C78589T1
4C-9820 Portable Microfiche Reader with One Lens and 120 VAC Transformer
Warranty: Manufacturers
Combines the portability of a personal size reader with the quality and features of larger desktop models
Features a floating lens mount for positive focus, an auto opening carrier for precise indexing and a distortion free image
Screen size
Projection
Rear
Carrier
Lens
Lamp
Overall dimensions
Closed
ID: C41378T1
Open
Weight
4 kg (9 lbs)
ID: C41361T1
Options
Part No.
Description
4C-9822
4C-9824
4C-9825
4C-9826
4C-9827
Overall Size Bifold Microfiche Holder with 30 Slots Available, 190.5 mm (712 in)
Warranty: Manufacturers
Warranty: Manufacturers
Accepts microfiche,
jackets or aperture cards
Viewer operates on ambient
light or internal batteries,
2 C-cells (not included)
Spare bulb and vinyl carrying case
included with each reader
Overall dimensions:
66.7 mm W x 38.1 mm D x 149.3 mm L
(258 in x 112 in x 578 in)
Weight of unit (with batteries)
is 340.2 g (12 oz)
ID: C34413T1
ID: C34441T1
02c.qxp
10/5/06
1:27 PM
Page 111
Personal/Safety
Miscellaneous
Part No.
Size
262-9304
262-9305
Shop Supplies
ID: D00778T1
Black Wire
Black annealed mechanics tie wire
Soft and pliable makes a perfect tie everytime
Part No.
Size
Material
Quantity
Length/Weight
262-9959
18 Gauge
Black iron
1 Roll
ID: D00820T1
172-0852 Creeper
Wheel size
51 mm (2.0 in)
Clearance
ID: C79649T1
Cat Mudflaps
Yellow on black rubber fiber
Sold individually
Part No.
Size
9U-7309
9U-7310
ID: C70231T1
02c.qxp
10/5/06
1:28 PM
Page 112
Personal/Safety
Miscellaneous
Size
Color
7X-2986
Black
Use
Large, on-highway trucks
154-6564
Black
7X-2982
Black
7X-2984
White
7X-2983
White
ID: C44032T1
Shop Supplies
Item
Part No.
Description
Item
Part No.
Description
169-8373
12
8C-8456
Sealed Cap
162-8873
Probe, Holder
13
177-9343
8C-3446
3J-7354
4C-4600
14
7X-3387
15
8C-3345
8T-7876
16
8C-3445
8C-3447
8C-3451
6V-0852
1U-8757
4C-4056
169-7373
169-7372
1U-5718
1U-5719
Vacuum Pump
Seal Kit for 1U-5718 Pump (not pictured)
4C-4055
Probe, purging
4C-4057
Tube Cutter
Replacement Blades (not pictured)
4C-3602
10
11
8T-9208
1U-7648
1U-8589
Not shown
Tube, 2.1 m (7 ft) pieces
02c.qxp
10/5/06
1:28 PM
Page 113
Personal/Safety
Miscellaneous
The 8C-8456 Sealed Cap can be applied to the valves with the valve dust cap
retention ring left in place. This cap enables the user to quickly seal a leaking
valve and prevents the need to immediately deadline (or stop) the machine or
compartment. The leaking valve can then be repaired (flushed) or replaced
during the scheduled maintenance period.
Some retrofit applications of the various valves may require the 8C-8456 Sealed
Cap to provide maximum protection for both sealing and environmental
contamination, such a brake and hydraulic system exposed to severe elements.
This cap serves ONLY as a temporary solution to a leaking sampling valve.
This smaller bottle assembly (169-7373) can be used with the 177-9343 Probe
and Cap Group and reduces mailing expense by approximately one-half for
dealers whose oil sample labs can provide effective full service analysis with
71 g (212 oz) or less of oil. These bottles can be used for engine samples since
particle count is not used for engine samples. This bottle can also be used with
the 1U-5718 Vacuum Pump used for non-pressurized oil sampling.
The 8T-9208 Probe Assembly can be attached to a 6.35 mm 4 in) I.D. rubber
hose (6K-0713 Hose 228.6 mm (9 in) long or any desired length cut from bulk
5P-6442 Hose or equivalent 100R6 type high temperature low pressure
hose). The 8T-9208 Probe and hose connected to a locally obtained waste
container provide a method to purge or flush the 8C-3446, 8C-3345, or 7X-3387
sample valves prior to obtaining the desired oil sample using either the
169-8373 Bottle Group or 177-9343 Probe and Cap Group with the desired
bottle. Approximately 14.8 cm3 to 29.6 cm3 (12 to 1 ounce) of expelled fluid
purges the valves.
Description
3B-7722
8C-6427
6V-7529
7J-8611
5P-9617
Adapter Reducer 916 inch-18 SAE external to 716 inch-20 SAE internal
3J-1907
3J-5390
9T-6865
2S-4078
5P-3501
3J-1907
3L-6521
1P-9369
6V-3966
7M-8489
5P-3413
Description
8C-3446
3J-7354
8C-3345
8T-7876
7X-3387
8C-3447
8C-3451
6V-0852
8C-8456
Sealed Cap
Shop Supplies
Part No.
02c.qxp
10/5/06
1:28 PM
Page 114
Personal/Safety
Miscellaneous
Shop Supplies
The 1U-5719 Kit provides replacement seals for the vacuum pump.
The 169-7372 Bottle has 4 oz (114 g) capacity. The bottle is marked showing
fluid fill range at 34 capacity. The fill range provides a reminder to not overfill
the bottle. Partially filling the bottle satisfies both mailing and lab requirements.
Full bottles expand because of temperature changes that can possibly rupture
within the mailing container. The partially filled bottle also allows the lab to
shake the fluid sample prior to extracting fluid for testing. Labels identifying the
fluid are obtained locally. The label is processed locally and attached to the
sample bottle.
The 169-7373 Bottle is the same as the 169-7372 bottle except the capacity is
71 g (212 oz) rather than 114 g (4 oz). Both are clear high performance plastic
rated at 91C (195F).
The 1U-8757 Tubing consists of five 30.5 m (100 ft) rolls of 6.35 mm (14 inch)
O.D. plastic tubing. Random lengths of tubing can be easily dispensed from the
tubing package. The tubing connects the vacuum pump to the fluid in the
compartment. The tubing is discarded after each sample extracted.
The 4C-4056 Tubing consists of five 30.5 m (100 ft) rolls of 7.9 mm (516 inch)
O.D. plastic tubing. Again, random lengths of tubing can be easily dispensed
from the tubing package. This tubing permits extraction of heavier oils when
using the vacuum pump.
Both tubing sizes are also available in pre-cut 2.1 m (7 ft) lengths that are
packaged 250 pieces per box. This eliminates cutting the tube for each sample.
The 4C-4055 Tubing contains 250 pieces of 6.35 mm (14 inch) O.D. tubing each
2.1 m (7 ft) long.
The 1U-7648 Tube cutter is a convenient tool that easily cuts the desirable
length of either 6.35 mm (14 inch) or 7.9 mm (516 inch) plastic tubing. The cutter
can cut the tubing at 90 or at a bias. The 1U-8589 blades are available as
replacement blades for the cutter.
The following summarizes various sampling tools available through the
Caterpillar Parts Distribution System:
Part No.
Description
4C-4056
Tube, 7.9 mm (516 inch) O.D. by 30.5 m (100 ft) lengths (5 rolls per box)
4C-4057
Tube, 7.9 mm (516 inch) O.D. by 2.1 m (7 ft) length (250 per box)
4C-4055
Tube, 6.35 mm (14 inch) O.D. by 2.1 m (7 ft) length (250 per box)
177-9343
8C-3345
8C-3446
8C-3445
8C-3447
8C-3451
8C-8456
Sealed Cap
3J-7354
8T-7876
169-8373
Bottle Group
8T-9208
1U-5718
Vacuum Pump
1U-5719
169-7372
169-7373
4C-4600
Mail Tube
1U-7648
Tube Cutter
1U-8589
Replacement Blades
1U-8757
Tube, 6.35 mm (14 inch) O.D. by 30.5 m (100 ft) length (5 rolls per box)
6V-0852
7X-3387
10/5/06
1:28 PM
Page 115
Use with
Hose O.D.
Height
ID: C41526T1
Shop Supplies
Includes:
- one 1-pint funnel
- two 1-quart funnels
268-5814 Funnel
Warranty: Manufacturers
Length: 457.2 mm (18 in)
Material: plastic
ID: D01615T1
C L EAN
EA
K EEP IT CL
IT
CL
US
A BLE D R U
FL UID
E
EAN
IT
Used to cover open or closed top drums cover snaps onto top of drum
Supports the Caterpillar contamination control efforts
Protects drum contents from water induction when stored outside
Keeps drum top clean and contents ready for use
Made of long lasting, low density polyethylene resistant
to petroleum-based fluids and ultraviolet rays
10 covers per package
KEE
02c.qxp
KE
Material thickness
Inside diameter
Color
Yellow
ID: C66952T1
02c.qxp
10/5/06
1:28 PM
Page 116
Rolls/Case
4C-6570
19 mm (34 in)
48
4C-6571
25.4 mm (1 in)
36
4C-6572
51 mm (2 in)
24
4C-6573
76.2 mm (3 in)
12
Shop Supplies
ID: C34476T1
Masking Paper
Specially formulated, high density masking paper
that helps reduce labor cost, decreases rework,
and minimizes cleanup
Its unique, virtually pinhole-free construction
delivers exceptional paint and solvent resistance
to help eliminate bleed-through
For protection, each roll is individually wrapped
The papers balanced construction offers
conformability, strength, and easy handling
Part No.
Description
Size
1U-9731
Masking Paper
76.2 mm x 304.8 m
(3 in x 1000 ft)
Rolls/Case
6
1U-9732
Masking Paper
304.8 mm x 304.8 m
(12 in x 1000 ft)
1U-9733
Masking Paper
609.6 mm x 304.8 m
(24 in x 1000 ft)
1U-9734
Masking Paper
914.4 mm x 304.8 m
(36 in x 1000 ft)
ID: C33574T1
Masking Tape
Six sizes available 13 mm (12 in) to 76.2 mm (3 in) wide, 60 yd. roll
Clean removal less adhesive transfer reduces residue which can stick to work surface
Sharp paint edge thin, smooth backing gives a superior, straight paint line with no jagged edges
One-piece removal balanced construction allows for one-piece removal
Heat resistant will generally function well in conditions up to 93 C (200 F)
Part No.
Rolls/Case
1U-6705
13 mm (12 in)
72
1U-6706
19 mm (34 in)
48
1U-6707
25.4 mm (1 in)
36
1U-6708
51 mm (2 in)
24
1U-6709
12
1U-6710
76.2 mm (3 in)
12
ID: C33573T1
02c.qxp
10/5/06
1:28 PM
Page 117
ID: C33566T1
ID: D01395T1
ID: C33565T1
ID: D01401T1
ID: D01389T1
Shop Supplies
02c.qxp
10/5/06
1:28 PM
Page 118
Warranty:
Shop Supplies
ID: C44126T1
ID: A06141-1T1
ID: A69878T1
ID: D00935T1
Aluminum Tape
A variety of sizes of aluminum tape that can be used to seal openings of various machine
components such as cylinder assembly tubes during shipping and storage
Also useful to seal pump ports and other openings
3.5 Mil thick
Tough but flexible
Hi-tack
Part No.
Description
Size
Waterproof
1
9U-6910
Aluminum Tape
9U-6911
Aluminum Tape
9U-6912
Aluminum Tape
9U-7042
Aluminum Tape
02c.qxp
10/5/06
1:28 PM
Page 119
ID: C33570T1
Features a hand brake in the core that allows operator to adjust tension for
tighter box reinforcement and bundling applications
Made from high impact, durable plastic
Handles 4C-4094 Filament Tape
Package quantity: 1
ID: C33571T1
ID: C33569T1
51 mm (2 in) wide X 1.7 mm (.065 in) thick by 3 m (10 ft) long rolls
Great for quick buildup for moisture seal, for insulation, and for cushion on cable harness and wires
Sticks fast, seals fast and stays tight
Molds easily around irregular surfaces while holding its position through a range of temperatures
1 roll per package
ID: C34418T1
Shop Supplies
ID: C33568T1
02c.qxp
10/5/06
1:28 PM
Page 120
Shop Supplies
Part No.
Description
Use
4C-4776
Handwrapper
all 279 mm (11 in), 400 mm (15.75 in), 457 mm (18 in) films
with 76 mm (3 in) cores
4C-4777
Handwrapper
all 279 mm (11 in), 692 mm (27.25 in), 457 mm (18 in) films
with 57 mm (2.25 in) and 76 mm (3 in) cores
ID: C34409T1
Fully mechanical
Adjustable stretch control
No spare partsno parts to replace
or wear out
Use with 4C-4880 Film
ID: C34407T1
ID: C34477T1
Portable
Mounts on any table surface
Accommodates up to 16 kg (35 lbs)
Adjustable zinc-plated support
Allows wrapping of smaller items using 4C-4880 Film and 4C-4779 or 4C-4780 Stretch Band-it Tools
ID: C34408T1
Part No.
Rolls/
Case
Film
Gauge
Film
Width
Roll
Length
Film
Color
4C-4880
12
135
127 mm (5 in)
Blue
ID: C41596T1
02c.qxp
10/5/06
1:28 PM
Page 121
Stretch Film
Part No.
Rolls/
Case
Film
Width
Roll
Length
Film
Color
291-6711
279.4 mm
(11 in)
457 m
(1500 ft)
Clear
291-6710
457.2 mm
(18 in)
457 m
(1500 ft)
Clear
ID: C41597T1
Shop Supplies
Part No.
Rolls/
Case
Film
Width
Roll
Length
Film
Color
293-2978
508 mm
(20 in)
305 m
(1000 ft)
Clear
ID: C54434T1
Strong durable plastic excellent for pallet unitization and load retention
Ensures product will arrive at destination clean and undamaged
To determine the size of opening for gusseted bags, add the width and depth
UVI protection will protect bag from sun damage in outdoor storage.
Part No.
Thickness
Quantity
5 mil
135 bags/roll
270-5331
5 mil
65 bags/roll
5 mil
35 bags/roll
5 mil
15 bags/roll
1 5%
ID: D01864T1
UVI
Roll Size
Thickness Color
270-5334
7 mil
white
Quantity
1 roll
270-5335
5 mil
clear
1 roll
270-5336
5 mil
clear
1 roll
ID: D01864T1
02c.qxp
10/5/06
1:28 PM
Page 122
Part No.
Edge Crush
Number
(ECT)
Quantity
270-5348
32 lb
270-5349
32 lb
25 per package
270-5350
32 lb
20 per package
270-5351
32 lb
25 per package
270-5352
32 lb
270-5353
1 400
Shop Supplies
Roll Size
270-5337
Thickness Quantity
1000 bags/carton
270-5338
500 bags/carton
270-5339
250 bags/carton
ID: D01876T1
Part No.
Size
270-5341
Thickness Quantity
2 mil
250 bags/carton
270-5342
2 mil
250 bags/carton
ID: D01882T1
Part No.
Size
270-5343
Thickness
Quantity
ID: D01888T1
25 per package
10 per package
5 per package
02c.qxp
10/5/06
1:28 PM
Page 123
Strapping Seals
Easy to use strapping buckles
Holds tension strong for nylon poly strapping
Used with 270-5345 Nylon Cord Strapping, 12.7 mm (12 in) wide
Part No.
Size
Quantity
270-5344
Shop Supplies
Part No.
Size
270-5345
Color
Quantity
4 rolls per box
ID: D01900T1
Heat capacity
125,000 BTU/hr.
Propane usage
Operating pressure
22 PSIG
Air consumption
21 CFM
Description
4C-4511
Fuel Line
4C-4512
Valve Assembly
ID: C34406T1
4C-4513
Hose Adapter
4C-4514
Spark Plug
4C-4516
Regulator Assembly
4C-4517
Gauge (Pressure)
4C-4518
U.L. Guard
02c.qxp
10/5/06
1:28 PM
Page 124
ID: D01335T1
Shop Supplies
Used for protecting metal parts and tools, metal sheeting interleaving, protecting goods on pallets from moisture and debris
Fifty pound virgin kraft paper with 10 pound polycoating
Heavy duty protection from water, grease, and oil
Fits standard dispenser 3-inch core with plugs that reduce it to 1 inch
Size: 914.4 mm x 274.3 m (36 in x 900 feet) roll
ID: D01179T1
ID: C44294T1
Item
Part No.
Bundle
Diameter Range
Length
Strap
Width
Pkg.
Qty.
Installer
(Item 1)
2
2
1S-9593
8L-8413
100
200
1U-5228
1U-5228
3S-2093
500
1U-5228
6K-0806
250
1U-5228
341432
7K-1181
100
1U-5227
5P-5148
100
6V-7555
Not shown
240-1678
1000
Tightens cable ties and cuts off excess when preset tension is attained
Used with straps, harnesses, and hoses
Has a comfortable grip and handle for all hand sizes
Tightens up to 12.7 mm (12 in) wide straps
Weight: 454 g (16 oz)
02c.qxp
10/5/06
1:28 PM
Page 125
Create metal labels that stand up to harsh weather, temperature and corrosion
For tagging hoses, castings, engine components, pipes, etc.
Heavy-duty cast aluminum body construction
Built-in hole punch
Front scissors cut-offcuts tape exactly where required
Tape advance and rewind control
Wheel characters-selection window helps reduce embossing errors
Also embosses 12.6 mm (12 in) vinyl tape
ID: C81379T1
Description
Size
Label maker
9U-7919
9U-7920
1
2
in x 16 ft
Description
Quantity
Size
9U-7920
10 per box
9U-7921
10 per box
9U-7922
10 per box
Pre-Programmed Calendar
Gives month, date, year, day of week
Programmed 200 years into the future with automatic leap-year adjustment
ID: C81380T1
Shop Supplies
Optional
Part No.
02c.qxp
10/5/06
1:28 PM
Page 126
Janitorial Products
Janitorial Products
Brooms
Push Broom
Shop Supplies
Handle
Selected hardwood with clear lacquered finish
One end rounded and other end equipped with crimped on metal thread
to fit standard floor brush blocks
ID: D00814T1
Whisk Broom
Made of selected fine broom corn
Sewn twice for strength
Plated ring cap
Part No.
Description
Size
263-0794
Push Broom
263-0796
263-0799
Whisk Broom
Janitorial Equipment
Janitorial Bucket
Mop Heads
Lay-flat style
Screw-type mount
Use with 264-4364 Mop Handle
Mop Handle
ID: D00685T1
Lay-flat style
Screw-type mount
Metal cap
Part No.
Description
Material
Size
264-4360
Janitorial Bucket
rubber
Qty.
264-4361
4-ply rayon
264-4363
264-4364
Mop Handle
hardwood
1
1
Part No.
Strength
Quantity
per Roll
263-0885 Medium
(10-12 micron)
57 l
(15 gal)
60.96 cm x 81.28 cm
(24 in x 32 in)
500
263-0886 Heavy
(12-14 micron)
125 l
(33 gal)
83.82 cm x 99.06 cm
(33 in x 39 in)
250
263-0887 Extra-Heavy
(15-17 micron)
208 l
(55 gal)
Qty
1
02c.qxp
10/5/06
1:28 PM
Page 127
Size
270-5346
Capacity
Color
Quantity
100 bags/case
ID: D01870T1
Shop Supplies
Ladders
Step Ladders and Shelf Ladders
Step Ladder
Shelf Ladder
Part No.
Description
Height
Step Size
Bottom Width
Approx. Spread
Approx. Weight
ID: D00784T1
263-1030
Step Ladder
1.2 m (4 ft)
7.6 cm (3 in)
48 cm (18 78 in)
71 cm (28 in)
263-1031
Step Ladder
2.4 m (8 ft)
7.6 cm (3 in)
63 cm (24 78 in)
263-1019
Shelf Ladder
1.8 m (6 ft)
7.6 cm (3 in)
39 cm (15 14 in)
263-1022
Shelf Ladder
2.4 m (8 ft)
7.6 cm (3 in)
39 cm (15 14 in)
02c.qxp
10/5/06
1:28 PM
Page 128
Shop Supplies
Thirteen kits for customers who want to stock hardware bins for their
service departments and/or service vehicles with various quantities
of popular sizes of Cat bolts, nuts, and washers
Hardware packaged in resealable plastic clamshell packages
Smaller easy-to-use packages offer convenience for the service technician
Part No.
Thread
Coating
Contains
Pieces
Bolt Head
3E-6640
Inch - Coarse
59 Part Numbers
1735
Hex
3E-9420
Inch - Coarse
38 Part Numbers
1975
Hex
3E-9421
Inch - Fine
38 Part Numbers
1650
Hex
3E-9422
Metric - Coarse
38 Part Numbers
1580
Hex
222-9998
Inch - Coarse
Zinc dichromate
59 Part Numbers
2175
Hex
222-9999
Inch - Coarse
Zinc dichromate
38 Part Numbers
1520
Hex
223-0000
Metric - Coarse
56 Part Numbers
1965
Hex
223-0001
Metric - Coarse
Zinc dichromate
56 Part Numbers
1985
Hex
223-0002
Metric - Coarse
Zinc dichromate
38 Part Numbers
1510
Hex
223-0003
Inch - Coarse
38 Part Numbers
1420
Socket
223-0004
Metric - Coarse
38 Part Numbers
1420
Socket
222-9996
Inch - Coarse
38 Part Numbers
1420
12-Point
222-9997
Inch - Fine
40 Part Numbers
1570
12-Point
Thread
Coating
Size
Contains
Pieces
178-2207
Inch - Fine
Large
24 Part Numbers
476
178-2208
Inch - Fine
Small
29 Part Numbers
894
178-2209
Inch - Coarse
Small
27 Part Numbers
502
178-2210
Inch - Coarse
Large
34 Part Numbers
936
178-2211
Metric - Coarse
Small
32 Part Numbers
630
ID: D01834T1
Description
Consists of:
Retail
Bulk
Pkg. Qty. Part No.
247-0188
1 -20
4
50
247-0189
1 -20
4
50
0S-1615
247-0190
1 -20
4
50
0S-1616
247-0191
1 -20
4
50
7B-2742
247-0192
1 -20
4
25
9F-7022
247-0193
1 -20
4
25
1B-2713
247-0194
1 -20
4
25
8B-2377
247-0195
1 -20
4
25
1D-4533
247-0196
1 -20
4
25
1B-2714
247-0197
1 -20
4
25
2A-4781
247-0198
1 -20
4
25
4B-9365
247-0199
1
4
in Hard Washer
25
5P-0537
247-0200
1
4
in Lock Washer
100
3B-4504
247-0201
1 -20
4
50
9S-8750
247-0202
5 -18
16
50
1C-0569
247-0203
5 -18
16
50
0S-1617
247-0204
5 -18
16
25
0S-1618
Full Nut
0S-1614
ID: D00499T1
02c.qxp
10/5/06
1:28 PM
Page 129
Retail Package
Part No.
Description
25
1B-7182
247-0591
25
8T-0275
247-0206
25
1A-9579
247-0592
50
9X-8267
247-0207
25
1B-9575
247-0593
M6 x 1, Hex Nut
50
6V-8225
247-0208
25
2B-2694
247-0594
50
6V-5215
247-0209
25
1D-4538
247-0595
50
6V-5217
247-0210
25
1D-4539
247-0596
25
6V-3940
247-0211
25
1D-4540
247-0597
25
6V-2317
247-0212
10
1D-4541
247-0598
25
6V-5218
247-0213
in Hard Washer
25
9M-1974
247-0599
25
6V-5219
247-0214
in Lock Washer
100
3B-4505
247-0600
25
8T-0276
247-0215
50
5S-0003
247-0601
25
6V-3918
247-0216
50
4F-4879
247-0602
10
8T-0100
247-0217
25
0S-0509
247-0603
10
5P-8347
247-0218
25
0S-1594
247-0604
M8 Washer
25
9M-1974
247-0219
25
0S-1588
247-0605
50
5P-7970
247-0220
25
0S-1591
247-0606
25
6V-6317
247-0221
25
0S-1571
247-0607
25
6V-4248
247-0222
25
0S-1590
247-0608
25
6V-1820
247-0223
10
0L-2070
247-0609
25
6V-3822
247-0224
10
0L-1143
247-0610
10
6V-5842
247-0225
10
0T-0573
247-0611
10
6V-5843
247-0226
10
0S-1619
247-0612
10
6V-4249
247-0227
in Hard Washer
25
5M-2894
247-0613
10
6V-5230
247-0228
in Lock Washer
100
3B-4506
247-0614
10
8T-5035
247-0229
Full Nut
50
9S-8752
247-0615
10
6V-7981
247-0230
25
1K-6705
247-0616
M10 Washer
25
6V-5839
247-0231
25
0S-1620
247-0617
25
2Y-5829
247-0232
25
0S-1621
247-0618
10
8T-0293
247-0233
10
0S-1595
247-0619
25
6A-5591
247-0234
10
0S-1585
247-0620
10
6V-3668
247-0235
10
0S-1587
247-0621
10
6V-8675
247-0236
10
1A-1460
247-0622
10
6V-8197
247-0237
2B-0947
247-0623
10
6V-5684
247-0238
9S-1366
247-0624
10
6V-7673
247-0239
1A-5822
247-0625
6V-3823
247-0240
0L-1329
247-0626
M12 Washer
25
5P-8245
247-0241
in Hard Washer
25
5P-8245
247-0627
25
6V-8149
247-0242
in Lock Washer
50
3B-4508
247-0698
5P-0598
247-0243
Full Nut
25
1F-7958
247-0699
Hose Clamp 60 mm - 82 mm
5P-4868
247-0244
10
1H-9456
247-0700
Hose Clamp 45 mm - 67 mm
5P-0597
247-0245
10
0S-1624
247-0701
Hose Clamp 16 mm - 27 mm
5D-1026
247-0246
10
0S-1592
247-0702
Hose Clamp 6 mm - 16 mm
1P-4278
247-0247
0S-1566
247-0703
5P-1717
247-0248
0S-1589
247-0717
Cotter Pin 18 in x 1 in Lg
50
3B-4617
247-0249
1A-1135
247-0718
Cotter Pin 18 in x 34 in Lg
50
3B-4615
247-0250
8S-9092
247-0719
50
3B-4607
247-0251
0S-1625
247-0720
Cotter Pin 18 in x 2 in Lg
50
3B-4621
247-0252
247-0253
247-0254
247-0255
247-0256
247-0583
247-0205
16-18
16-18
16-18
16-18
16-18
16-18
16-18
16-18
16
16
16-18
8-16
8-16
8-16
8-16
8-16
8-16
8-16
8-16
8-16
8-16
8-16
8
8
8-16
2-13
2-13
2-13
2-13
2-13
2-13
2-13
2-13
2-13
2-13
2-13
2
2
2-13
8-11
8-11
8-11
8-11
8-11
8-11
8-11
8-11
Full Nut
Consists of:
Retail
Bulk
Pkg. Qty. Part No.
1A-8537
247-0721
Cotter Pin 18 in x 1 14 in Lg
50
3B-4618
1B-4367
247-0749
3K-8782
in Hard Washer
10
5P-8247
247-0750
8M-8948
in Lock Washer
25
3B-4510
247-0751
8M-0456
10
4K-0367
247-0752
113-8490
50
8T-0639
247-0753
113-8491
247-0584
50
6V-8837
247-0754
113-8492
247-0585
50
6V-8214
247-0755
113-8493
247-0586
50
6V-8490
247-0762
20
3S-2093
247-0587
25
8T-0640
247-0588
50
6V-2315
247-0763
10
6K-0806
247-0589
25
2W-9499
247-0590
25
6V-7728
247-0764
10
7K-1181
8-11
8-11
Full Nut
Shop Supplies
Description
Consists of:
Retail
Bulk
Pkg. Qty. Part No.
Retail Package
Part No.
02c.qxp
10/5/06
1:28 PM
Page 130
ID: D00702T1
Shop Supplies
Check-a-Thread
Quickly identifies hardware thread diameter and pitch
Four holes on mounting base for easy attachment to retail parts counter,
service shop tool crib, or field service truck
Dimensions (L x H x W)
Metric
Part number
Range
No. of bolt sizes
250-6866
16 mm-2.0 to 4 mm-.7
15
Inch
Part number
Range
No. of bolt sizes
Sheet metal/wood screw sizes
250-6865
3 -16 to #6-32
4
21
5
ID: D00990T1
Reference
NEHS0571 Special Instruction, Cross-Reference List (identifies the proper Caterpillar O-ring part number)
ID: D01561T1
Part No.
Thread
261-6665
1
4
261-6666
5
16
261-6667
3
8
261-6668
7
16
261-6669
1
2
- 13
261-6670
5
8
- 11
261-6671
3
4
- 10
- 20
- 18
- 16
- 14
Maximum Load
109 kg (240 lb)
172 kg (380 lb)
277 kg (610 lb)
454 kg (1000 lb)
03a.qxp
10/5/06
1:28 PM
Page i
03a.qxp
10/5/06
1:28 PM
Page ii
03a.qxp
10/5/06
1:28 PM
Page 1
Introduction
MSDS Information
NOTE:
Not all products are available worldwide. Some products have different part
numbers for Europe, Africa, Middle East, and Commonwealth of Independent
States (EAME) dealers and customers to order due to specific hazardous
material label information required in EAME for these products. Products
which require specific hazardous material labels in EAME may not be available
in all container sizes in EAME. N/A indicates a product which is not available
in EAME.
Part No.
(EAME only)
173-0531
185-4005
Kit Consist
ID: C33317T1
Part No.
Part No.
(EAME only)
Description
Size
4C-9507
185-3988
Retaining Compound
50 ml (1.69 fl oz)
7M-7456
185-3994
Bearing Mount
50 ml (1.69 fl oz)
9S-3263
185-3996
Thread Lock
50 ml (1.69 fl oz)
5P-3413
185-3992
Pipe Sealant
50 ml (1.69 fl oz)
169-5464
185-4004
Part No.
(EAME only)
154-8874
185-4003
ID: C79507T1
03a.qxp
10/5/06
1:28 PM
Page 2
Reference
SEHS8869 Special Instruction; contains instructions for making repairs to engine
blocks with 1U-6132 Belzona 1311 Ceramic R Metal
SELD0458 Reconditioning Bulletin for 3500 Cylinder Block Pitting; instructions
for repairing water port damage with 1U-6132 Belzona 1311 Ceramic R Metal
SEBF8263 Reuse and Salvage Guide for 3500 Top Deck Repair on cylinder
blocks; instructions for repairing top deck damage with 1U-6132 Belzona 1311
Ceramic R Metal
Come in handy plastic tool box; knives, spatulas,
work surface and tool box are not serviced separately
Part No.
Part No.
(EAME only)
Description
Qty.
1U-6140
207-7532
1U-6132
207-7531
1U-6136
207-7530
1U-6128
Knives (Plastic)
Spatulas (Plastic)
NOTE: These products are packaged in kits to provide the correct ratio for
mixing. They must be mixed only in the correct ratio in order to get satisfactory
results. The various bases and solidifiers are not serviced individually.
Instructions for use of each of these compounds are included in the kit and
the correct mix ratios are specified for each. If desired, the cure speed of
the Belzona compounds can be accelerated by the application of heat. You can
apply the heat by either heat lamps, ovens or heat guns.
ID: C66966T1
Description
Quantity
144-7779
Knife
Spatula
Mixing bowl
Instructions, MSDSs
03a.qxp
10/5/06
1:28 PM
Page 3
Loctite Quickmetal
Thread Lock
Removable strength
Breakaway torque 12.995 Nm (115 in. lb)
Prevail torque 5.989 Nm (53 in. lb)
Service temperature up to 149 C (300 F)
Medium Gap fill, up to 0.13 mm (0.005 in)
10 minute fixture 24 hour full cure time
Used to seal, lock in place, and prevent rust lock:
- Small bolts, set screws, terminal screws, deck
plate cap screws, radiator guard bolts
- Roller guard rolls
ID: D01645T1
Part No.
Size
Pkg.
Qty.
269-1943
Part No.
(EAME only)
Size
Qty
4C-4030
N/A
10 ml (.34 fl oz)
10
9S-3263
185-3996
50 ml (1.69 fl oz)
10
ID: C79561T1
Part No.
Part No.
Part No.
(EAME only)
Size
Qty
154-9731
N/A
10 ml (.34 fl oz)
10
155-0695
185-3998
50 ml (1.69 fl oz)
10
ID: C79508T1
Part No.
Part No.
(EAME only)
Size
Qty.
4C-9506
N/A
10 ml (.34 fl oz)
10
4C-9507
185-3988
50 ml (1.69 fl oz)
Bearing Mounts
ID: C79538T1
Qty.
10
5
03a.qxp
10/5/06
1:28 PM
Page 4
Wicking Sealant
Qty.
10
ID: C44347T1
Cyanoacrylate Adhesives
Use for instant bonding on mated metal, plastic or rubber parts and assemblies
Good general purpose liquid super glue
Fast curing and high strength
153-9155 (black) has increased impact resistance
Store between 2C and 8C (35.6F to 46.4F)
Gap fill: 0.0762 mm (0.003 inch) for clear and 0.15 mm (0.006 inch) for black
Size: 3 g (.105 oz)
See Material Safety Data Sheet (MSDS) for additional information
Part No.
Color
157-7228
Clear
152-9155
Black
ID: D01269T1
Cement
Part No.
(EAME only)
Size
Qty.
5H-2471
185-4591
236 ml (8 fl oz)
12
ID: D00635T1
ID: C44114T1
03a.qxp
10/5/06
1:28 PM
Page 5
2500 PSI
Pot life
9 minutes
Mix ratio
1:1
Size
ID: C79562T1
Plexus MA 300
General purpose,
semi-flexible adhesive
Bonds most unprepared
common plastics
(ABS, PVC, acrylic)
Also bonds fiber-reinforced
composites and metals
4 to 6 minutes
Fixture time
12 to 15 minutes
Shear strength
Size
Part No.
Part No.
(EAME only)
Size
Part No.
Part No.
(EAME only)
Size
Qty.
209-0987
211-2679
50 ml (1.69 fl oz)
5P-3413
185-3992
50 ml (1.69 fl oz)
10
ID: C79515T1
185-4004
ID: C80053T1
Part No.
Size
Color
141-5830
Black
141-5831
Blue
ID: C79388T1
03a.qxp
10/5/06
1:28 PM
Page 6
Gasket Maker
Medium strength for rigid flanges where extra shear strength is desired
Service temperature up to 175C (350F)
Large gap fill, up to .5 mm (.020 in)
Fast cure speeds
Uses:
- original equipment gasket for many applications
- seals and locks tapered pipe plugs, nipples, and fittings
- core plugs; some final drive flanges
- replaces flywheel housing gasket in several applications
Part No.
Part No.
(EAME only)
Size
6V-6640
185-3985
50 ml (1.69 fl oz)
ID: C79588T1
N/A in EAME
Dries hard, machinable
Resists gasoline, diesel fuel, oils, antifreeze, alkali,
acids, steam
Withstands pressures to 34474 kPa (5000 PSI)
Withstands temperature to 204C (400 F)
Size: 85 g (3 oz) tube
Quantity: 12
N/A in EAME
Non-hardening; thick, pasty
Resists gasoline, diesel fuel, oils, antifreeze, alkali,
acids, steam
Withstands pressures to 34474 kPa (5000 PSI)
Withstands temperature to 204C (400F)
Seals joints in segmented gaskets, and T joints
Size: 85 g (3 oz) tube
Quantity: 12
ID: C79510T1
ID: C79573T1
N/A in EAME
Thin, brushable, for sealing finely machined surfaces
Resists gasoline, diesel fuel, oils, antifreeze, alkali, acids, steam
Withstands pressures to 34474 kPa (5000 PSI)
Withstands temperature to 204C (400F)
Seal many types of gear type pumps; seals rubber hose to nipple connections
Size: 120 ml (4 fl oz) can
Quantity: 12
ID: C79583T1
Liquid Gasket
Part No.
Part No.
(EAME only)
Size
Part No.
Part No.
(EAME only)
Size
1U-8846
185-3983
50 ml (1.69 fl oz)
9U-5839
N/A
118 ml (4 fl oz)
4C-5300
185-3984
138-8436
185-4590
236 ml (8 fl oz)
ID: C79511T1
03a.qxp
10/5/06
1:28 PM
Page 7
Part No.
Part No.
(EAME only
Qty.
Color
Max. Temp.
(intermittent)
Max. Temp.
(continuous)
Size
185-3987
10
Blue
260C (500F)
204C (400F)
8T-9014
205-8858
10
Clear
249C (480F)
204C (400F)
4C-9613
N/A
Clear
249C (480F)
204C (400F)
82.8 ml (3 fl oz)
3S-6252
185-3986
Black
260C (500F)
204C (400F)
82.8 ml (3 fl oz)
205-8857
10
Red
316C (600F)
260C (500F)
4C-9614
N/A
Red
316C (600F)
260C (500F)
82.8 ml (3 fl oz)
186-1527
White
260C (500F)
204C (400F)
82.8 ml (3 fl oz)
Ultra-Black
260C (500F)
204C (400F)
82.8 ml (3 fl oz)
249C (480F)
204C (400F)
N/A
Clear
ID: C79563T1
ID: C79512T1
ID: C79544T1
Holds any 12 oz. tube designed for use with a caulking gun
Recommended for all grades of caulks, sealants and adhesives
from heavy to light consistencies
Size of cartridge: 110 Gal.
ID: C41206T1
ID: D01479T1
03a.qxp
10/5/06
1:28 PM
Page 8
ID: C41207T1
Part No.
Description
Size
9U-7239
Butyl Sealant
9U-6919
inch x
1
8
Part No.
Part No.
(EAME only)
Description
Size
121-3911
187-4858
Window Primer
175-2934
187-4864
Activator
175-2935
187-4857
175-2936
Part No.
Part No.
(EAME only)
119-0781
Description
Size
Part No.
(EAME only)
Description
166-1358
189-8653
Polycarbonate Primer
Part No.
(EAME only)
Desciption
166-1359
187-4862
ABS Primer
Heating Oven
Pre-heat 175-2935 inside 175-2936 Oven for 1 hour prior to repairs. Clean
the area to be repaired with 9U-6917 (189-8679 EAME only) (pour top quart)
or 222-3117 (189-6296 EAME only) (aerosol).
Description
121-9777
Cutout Wire
121-9780
121-9778
Cutout Knife
121-9779
121-9782
121-9781
127-6883
Sponge Brushes
Part No.
(EAME only)
Description
Size
121-3911
187-4858
Window Primer
121-3908
187-4856
Window Adhesive
Clean the area to be repaired with 9U-6917 NACD only (189-8679 EAME only)
(pour top quart) or 222-3117 (aerosol) (189-6296 EAME only). Use 121-3911
(187-4858 EAME only) to prepare the area. Wait 10 minutes, then apply
121-3908 (187-4856 EAME only) to the area.
See SEHS9824-01 Special Instruction (6/99) for detailed instructions.
03a.qxp
10/5/06
1:28 PM
Page 9
Cleaners
Part No.
Size
Pkg.
Qty.
271-1648
ID: D00665T1
ID: D01663T1
Contains no silicone
Formulated with UV inhibitors
to protect surface area
Cleans and protects
Size: 340 g (12 oz)
Service Parts
Part No.
Description
169-5418
Seal Lubricant
(1 Gallon)
169-5420
Seal Cleaner
(1 Gallon)
265-2256
ID: D00677T1
Seal cleaner
237 ml (8 oz.)
Seal lubricant
237 ml (8 oz.)
Critical
task wipers
ID: C79750T1
Description
9U-7971
Quantity
0.95 l (1 qt)
102-9721
ID: C66640T1
Cleaners
03a.qxp
10/5/06
1:28 PM
Page 10
Cleaners
Strong alkaline cleaners that remove dirt, oils, paint, and carbon deposits from ferrous metal parts
Clean better than previous Hydrosolv products due to increased levels of surfactants and wetting agents
Well suited for use in cabinet pressure washers and hot tanks
Non-foaming and aluminum safe
Hydrosolv 4110
Non-foaming aluminum safe cleaner
Strong alkaline cleaner that removes dirt, oils, paint,
and carbon deposits from aluminum and ferrous metal
parts without discoloration
Well suited for use in cabinet pressure washers
and hot tanks
Part No.
Part No.
(EAME only)
Name
Qty.
Size
174-6854
185-4592
5 gallon
174-6855
185-4593
55 gallon
174-6856
185-4595
5 gallon
174-6857
185-4596
55 gallon
4C-8648
N/A
Hydrosolv 4110
1 gallon
4C-8649
185-4612
Hydrosolv 4110
5 gallon
4C-8650
185-4615
Hydrosolv 4110
55 gallon
ID: C80311T1
Pressure Wash
Cat Pressure Wash
Heavy-duty, ready-to-use detergent and degreaser
for use in hand held pressure washers
Clean rinsing and can be used to wash engines,
trucks, machines, etc.
Part No.
Part No.
(EAME only)
Name
174-6858
185-4597
5 gallon
174-6859
185-4598
55 gallon
1U-5490
185-4619
5 gallon
Quantity
Size
Hydrosolv 4165
Heavy-duty concentrated alkaline cleaner formulated
for use in high-pressure washers
Provides two weeks rust protection if you do not rinse
the part after cleaning
ID: C80311T1
Hydrosolv Descaleant
and Conditioner
Part No.
Part No.
(EAME only)
Description
Size
1U-8813
N/A
1 gal
N/A
185-4623
1 gal
1 quart
12
1U-9698
Qty.
ID: C80222T1
03a.qxp
10/5/06
1:28 PM
Page 11
Cleaners
Cat GP Wash
Economical ready-to-use general-purpose liquid cleaner for shop
maintenance, machine washing, floor washing, etc.
Provides good detergency for all types of light duty cleaning
Part No.
Part No.
(EAME only)
Name
Qty.
Size
174-6860
185-4600
Cat GP Wash
5 gallon
174-6861
185-4601
Cat GP Wash
55 gallon
174-6885
185-4604
1 gallon
ID: C80311T1
Carpet/Upholstery Cleaner
Easy cleaning of carpet and like fabrics
Part No.
Size
Pkg.
Qty.
269-8297
Part No.
Size
Pkg.
Qty.
269-1928
12
03a.qxp
10/5/06
1:28 PM
Page 12
Coolants
Coolants
Cat ELC
Size
Size
(gal)
(L)
(gal)
Part No.
(L)
Part No.
200
215-4242 2
237-4952 1
Applications
101-2844
205
129-2151
210
205-6613
55
101-2845
1000
205-6614
275 (tote)
222-1534
1000
237-4953 1
Features
Bulk
156-2653
Bulk
206-7831
Bulk
237-4950 1
Embittered
1
5
238-8649
55
238-8650
Benefits
238-8648
1
119-5150
Embittered
205-6611
214-4820 1
1
5
205-6615
238-8647
215-4245 2
214-4824 1
215-4244 2
20
237-4951
20
215-4246 2
25
205-6612
119-5152
210-0786
1
215-4241 2
219-3039 2
1 Australia
2 Brazil
ID: D01297T1
Cat DEAC
Cat SCA
Application
Application
For use with Cat DEAC low silicate heavy-duty diesel engine coolants,
including glycol-based antifreezes
Features
Features
Helps stop rust and mineral deposits from forming in the cooling system
Benefits
Helps prevent corrosion and pitting
in the cylinder liner and block
Protects against freezing, pitting
and corrosion
Benefits
Protects all metals
Protects against cylinder liner cavitation and corrosion
Will not affect gaskets or hoses
ID: D01303T1
Size
(gal)
(L)
Part No.
(gal)
Embittered
(L)
Part No.
Cat SCA
238-8651
6V-3542
55
238-8653
0.125 (1 pt)
8T-1589
9X-6586
0.250 (1 qt)
3P-2044
215-4247 2
8C-3680
55
Size
(gal)
Size
(L)
Part No.
20
9X-6585
8C-3684
20
238-8291 1
217-0616
55
8C-3686
20
219-3040 2
20
217-0617
Bulk
156-2649
200
219-3041 2
208
217-0618
Bulk
2P-9868
205
237-7670 1
1 Australia
2 Brazil
ID: D01309T1
5P-2907
03a.qxp
10/5/06
1:28 PM
Page 13
Coolants
Application
Benefits
Features
Meets ASTM D6210 standard for heavy-duty antifreeze/coolants and
ASTM D3306 for automotive applications; also meets glassware corrosion
test ASTM D1384
Ready to use as initial fill or for top off; premixed 50 percent
with deionized water
Requires no initial addition of SCAs
Silicate additives in Cat NGEC for corrosion control also seal minor leaks by
combining with oxygen in the atmosphere and creating a solid silicon dioxide
Size
(gal)
Part No.
Cat NGEC
233-9797
233-9798
55
233-9799
275
239-3649
ID: D01315T1
Applications
Applications
Cooling system cleaner; full effect after several weeks in the cooling system
Not for use in removing large amounts of oil from cooling systems
Feature
Removes scale or lime deposits
Feature
Benefit
Benefit
Size
(gal)
(L)
Size
Part No.
(gal)
(L)
Part No.
0.50 (2 qt)
6V-4511
0.125 (1 pt)
185-5121
0.250 (1 qt)
4C-4610
4C-4611
1.89
ID: D01321T1
4C-4609
4C-4612
55
4C-4613
3.79
185-4630
ID: D01327T1
Application
Simple dip test takes just minutes
to perform
Feature
Does not require dilution, titration
or drops to count
Benefit
Includes a color density change
for people with color blindness
Part No.
223-9116
ID: D01333T1
Item
NACD
Part No.
4C-9297
ID: D01339T1
Cat NGEC
03a.qxp
10/5/06
1:28 PM
Page 14
Lubricants
Lubricants
Cat DEO
Applications
Size
(gal)
Features
Size
(L)
Part No.
Cat DEO
SAE Oil Viscosity: 10W-30
API/OEM Specification: API CI-4, ECF-1
(gal)
(L)
Part No.
Cat DEO
SAE Oil Viscosity: 30
0.250 (1 qt)
8C-3702
3E-9709
(4x) 1
248-7520
55
3E-9708
8C-3700
Bulk
155-6198
55
8C-3699
18
283-1709
Bulk
20
3E-9844
Benefits
9X-6178
200
130-7055
20
7X-7840
208
3E-9707
200
7X-2887
1000
148-3539
205
7X-7839
Bulk
5P-2586
208
9X-6462
1000
9X-6271
Bulk
8C-3698
Cat DEO
SAE Oil Viscosity: 15W-40
API/OEM Specification: API CI-4, ECF-1
0.250 (1 qt)
3E-9715
(4x) 1
248-7518
3E-9713
55
3E-9712
Bulk
155-6199
ID: D01345T1
283-3425
1
123-4077
3E-9902
3E-9901
18
3E-9900
19
3E-9849
20
3E-9848
60
121-4038
200
3E-9842
205
3E-9841
208
3E-9840
1000
3E-9838
1040
201-0775
2000
120-5285
10,000
119-5131
15,000
119-5130
Bulk
8T-9548
155-6201
Cat DEO
SAE Oil Viscosity: 40
0.250 (1 qt)
8C-3707
8C-3706
8C-3705
55
8C-3704
Bulk
155-6202
18
9X-2004
19
9X-8529
20
7X-7843
200
9X-8528
205
7X-7842
208
9X-6463
1000
9X-6272
1200
203-1044
2000
119-5134
10,000
119-5133
15,000
119-5132
Bulk
8C-3703
03a.qxp
10/5/06
1:28 PM
Page 15
Lubricants
Applications
Used in heavy duty engines equipped
with Diesel Particulate Filters (DPF)
Required for all on-highway engines equipped with after-treatment
systems using 15 ppm sulfur fuel (may also be used with engines
using less than or equal to 500 ppm (0.05% wt.) sulfur fuel which
are not fitted with after-treatment systems
Features
Engine oil compatible with ultra low sulfer (ULS) diesel fuel
applications
Limited ash, sulfated ash, and phosphorous contentreduces
DPF plugging, extends DPF life, and reduces catalyst deactivation
Better detergents and dispersantsenhances protection against
piston and ring groove deposits, improves soot dispersing and sootrelated viscosity control
Advanced additive packageSpecially designed to improve the
protection of both the engine and Diesel Particulate Filter (DPF)
Aftertreatment System
Fuel Sulfur
Content
Recommended
Engine Oil
Cat DEO-ULS1
None
1 Minimum
Cat DEO or
Cat DEO-ULS
Note that Cat DEO-ULS can be used in off-highway applications. In these applications and when
used with high sulfur fuels that may contain up to 5000 parts per million (ppm) sulfur, oil drain
intervals may need to be revised.
Size
Benefits
On-Highway Engine
Reference
(gal)
(L)
Part No.
Cat DEO-ULS
SAE Oil Viscosity: 15W-40:
API/OEM Specification: API CJ-4, ECF-3
1
3.785
291-3866
19
291-3868
55
208
291-3869
ID: D01717T1
Application
Applications
Synthetic engine oil for Cat and other OEM earthmoving, commercial,
marine and on-highway truck diesel engines
Preferred engine oil for arctic climates and operation
at temperature extremes
Features
Highly resistant to oxidation
Provides exceptional cold start
operation in temperatures as low
as -30 C (-22 F)
Features
Blend of two Group IV synthetic base stocks for easy starting and less
wear at low temperatures
High temperature lubricity and superior oxidation for reduced wear
in high temperature operation
Higher solubility capability to keep soot and contaminants in suspension
Benefits
Provides extended drain capability
Provides capability to improve fuel
economy by 2-5 percent over
conventional 15W-40 oils
Benefits
ID: D01351T1
Size
(gal)
(L)
Part No.
Size
(L)
Part No.
Cat Arctic DEO SYN1
SAE Oil Viscosity: 0W-30
(4x) 1
248-7519
55
141-3341
20
228-6071
155-6200
205
228-6073
Bulk
5
224-8665
20
224-8666
208
224-8667
Bulk
142-1417
Bulk
1 This
5P-5289
oil is not available for use in all global regions.
Cat DEO-ULS
03a.qxp
10/5/06
1:28 PM
Page 16
Lubricants
Cat NGEO
Application
Natural gas engine oil for use in all Cat natural gas engines and any
four-cycle, medium-to-high speed gas engine requiring a low ash
level product
Features
Provides excellent foam and corrosion resistance
Improves piston cleanliness and controls carbon deposits
Benefits
Provides maximum protection against piston scuffing, scoring
and piston/cylinder liner wear
Provides excellent valve guide face and seat protection
Drain recommendations
G3400 - 750 hrs
G3500 - 1000 hrs
G3600 - 5000 hrs
Size
(L)
Part No.
Cat NGEO
SAE Oil Viscosity: 30
19
121-0326
205
9X-8526
Cat NGEO
SAE Oil Viscosity: 40
19
121-0327
200
197-6911
205
9X-8527
208
105-3336
209
166-3491
1000
159-8156
ID: D01357T1
Features
Increased detergent concentration and acid neutralizing capability to assure less lacquer
and deposits on pistons and valves
Control of sludge formulation
Outstanding resistance to oil nitration and oxidation
Part No.
216-9220
208
216-9223
Bulk
Benefits
7X-2425
20
216-9221
208
216-9224
Bulk
7X-2426
Size
(gal)
Features
Superior thermal stability
Superior resistance to oxidation and nitration
Excellent viscosity control
Benefits
Capability for longer drain intervals
Reduces carbon and sludge formation
Maximum protection against foaming and corrosion resistance, piston scuffing, scoring and piston/cylinder
wear, foam and corrosion damage, and piston carbon deposits
Drain recommendations
G3400 - 2000 hrs
G3500 - 2000 hrs
G3600 - 8000 hrs
(L)
Part No.
225-5082
55
225-5083
Bulk
272-3217
19
275-5709
20
225-5084
205
269-1971
208
225-5085
1000
249-2309
03a.qxp
10/5/06
1:28 PM
Page 17
Lubricants
Applications
Size
Size
(gal)
Features
8T-9568
208
9X-6466
55
8T-9569
1000
7X-7611
(L)
Part No.
(gal)
Cat TDTO
SAE Oil Viscosity: 10W
API/OEM Specification: Cat TO-4
Bulk
Benefits
Increases load carrying capacity of clutches and eliminates
brake chatter
Provides maximum friction material life in power-shift
transmissions and wet brakes
(L)
Part No.
155-6212
1040
201-0777
100-7019
2000
119-5137
19
145-0995
10,000
119-5136
20
7X-7852
15,000
119-5135
25
9X-8525
Bulk
2P-9869
200
112-2866
205
7X-7851
208
103-2528
209
123-3104
1000
166-0393
Bulk
3P-0659
Cat TDTO
SAE Oil Viscosity: 50
API/OEM Specification: Cat TO-4
5
8T-9576
55
8T-9577
Bulk
155-6214
Cat TDTO
SAE Oil Viscosity: 30
API/OEM Specification: Cat TO-4
283-3495
5
9X-8443
18
9X-2012
(4x) 1
248-7521
19
9X-8531
8T-9572
20
7X-7858
55
8T-9573
60
121-4043
Bulk
155-6213
200
9X-8530
7X-7857
ID: D01363T1
283-3494
205
9X-6467
208
3E-9478
18
9X-2010
1000
7X-7612
19
9X-8469
2000
119-5140
20
7X-7855
10,000
119-5139
60
121-4042
15,000
119-5138
200
7X-2888
Bulk
5P-1228
205
7X-7854
228-6069
205
228-6070
1 Cat
Cat TDTO-TMS
Application
Transmission and drive train oil for use in all seasons
Size
Features
Exceeds the Cat TO-4 industry specification and meets Allison C-4
transmission peformance
Protects against scoring and pitting of gear teeth and bearings
Improved cold water performance
Benefits
Improves transmission performance in cold weather
Provides extended drain capability
Compatible for use in multiple compartments
(gal)
(L)
Part No.
154-0195
55
154-0194
Bulk
154-0192
20
154-0196
208
154-0197
Bulk
154-0193
ID: D01369T1
Cat TDTO
03a.qxp
10/5/06
1:28 PM
Page 18
Lubricants
Cat MTO
Size
Application
(gal)
(L)
Part No.
For use in specified Cat components and systems, such as Backhoe Loader
Rear Axles, and Compactors CP563 and CS563 Rear Axles
Cat MTO
SAE Oil Viscosity: 10W-30
API/OEM Specification: Ford M2C134D/C, John
Deere J20A/C, Case MS1205, MS1207
Features
105-3335
55
105-3334
Bulk
155-6218
Benefits
Provides considerable improvement in wet brake control
Optimized wear protection of gears, pumps and hydraulic valves
172-6894
18
135-3189
19
112-9183
20
109-4395
200
126-2700
205
138-4271
208
120-5286
Bulk
105-3333
(L)
Part No.
ID: D01375T1
Cat FDAO
Size
Applications
Preferred final drive and axle oil for Cat machines; used as factory-fill
for all Cat off-highway trucks and D6R-D11R tractor final drives
Not to be used in compartments which contain brake or friction materials
(unless specified in the Operational & Maintenance Manual; not to be
used in compartments in which GL-5 gear oils are required)
(gal)
Cat FDAO
SAE Oil Viscosity: 60
API/OEM Specification: Cat FD-1
5
184-6022
55
184-6021
Bulk
184-6020
Features
18
20
184-8055
200
198-7672
205
201-9855
Benefit
208
184-8056
1000
221-3445
206-5210
1200
202-9753
Bulk
184-8054
(L)
Part No.
ID: D01381T1
Features
Reduces contact fatigue
Protects against rust and copper corrosion
Minimizes foaming
Size
(gal)
208-2390
55
198-7450
18
206-5211
208
206-5212
Benefits
Provides extended life capability when SOS Services is used
at 500 hour intervals
Extended gear and bearing life
ID: D01387T1
03a.qxp
10/5/06
1:29 PM
Page 19
Lubricants
Applications
Size
Size
(L)
(gal)
Part No.
(L)
Part No.
(gal)
Features
(4x) 1
248-7522
18
8T-9580
20
127-5454
55
8T-9581
200
122-6627
Cat HYDO
SAE Oil Viscosity: 30
Cat HYDO
SAE Oil Viscosity: 10W
155-6216
208
127-5453
9X-6171
Bulk
231-3801
18
9X-2014
19
9X-8533
20
7X-7861
Bulk
Benefits
Disperses water in the hydraulic oils, preventing water
damage to pumps, motors and valves
Provides maximum protection against mechanical wear,
low temperature rusting and corrosive wear
4000 hour drain recommendation in most models
and applications when combined with SOS Services
100-7017
60
121-4044
200
9X-8532
205
7X-7860
208
9X-6468
1000
7X-7613
1040
201-0776
2000
119-5143
10,000
119-5142
15,000
119-5141
Bulk
2P-9063
ID: D01393T1
Cat GO
Applications
For use in the vibrator drum of soil compactors
For use in manual transmissions, axles, final drives and systems requiring API GL-5 oil
Features
Protects against rust and corrosion
Protects against scoring and pitting of gear teeth and rolling element bearings
Includes EP Extreme Pressure additive
Benefit
Provides excellent stability under high temperatures and superior performance under low temperature
ID: D01399T1
Size
(gal)
Size
(L)
Part No.
(gal)
Cat GO
SAE Oil Viscosity: 80W-90
API/OEM Specification: GL-5
(L)
Part No.
Cat GO
SAE Oil Viscosity: 85W-140
API/OEM Specification: GL-5
8T-9582
15
8C-7398
5
4
7X-7618
9X-6185
30
8T-9583
18
133-9643
55
8T-9584
19
9X-8535
Bulk
155-6220
20
7X-7617
9X-6470
50
3E-8326
20
7X-7867
200
205-4312
60
7X-7887
205
7X-7616
208
9X-6469
209
133-9644
1000
119-5129
1000
7X-7615
1200
8C-9927
Bulk
7X-7614
2000
119-5144
Bulk
2P-9863
Cat HYDO
03a.qxp
10/5/06
1:29 PM
Page 20
Lubricants
Cat Synthetic GO
Applications
Synthetic gear oil for specified Cat direct drive transmissions, differentials,
final drives, and sealed and lubricated track joints
Recommended for all systems permitting the use of GL-5 multi-purpose
type gear oil
Features
Size
(gal)
(L)
Part No.
Cat Synthetic GO
SAE Oil Viscosity: 75W-140
5
242-3466
55
242-3467
Bulk
8C-3400
Cat Arctic GO
SAE Oil Viscosity: 75W-90
Benefits
8C-3688
55
8C-3747
Bulk
155-6222
Bulk
5P-7040
ID: D01405T1
Benefit
Reduces noise and chatter experienced by some Cat backhoe loaders
Size
Item
(gal)
0.250 (1 qt)
0.250 (1 qt)
(L)
Part No.
Bulk
197-0017
185-0783
Bulk
1U-9891
9X-2037
ID: D01411T1
03b.qxp
10/5/06
1:29 PM
Page 21
Greases
Size
(lb)
(kg)
Part No.
14 oz (cartridge)
397 g (cartridge)
161-9203
197-9227
35 (metal pail)
16 (metal pail)
266-8562
35 (plastic pail)
16 (plastic pail)
183-3432
120 (keg)
54 (keg)
161-0970
Features
400 (drum)
181 (drum)
161-0971
3500 (tote)
1588 (tote)
266-8564
ID: D01435T1
Benefits
397 g (cartridge)
183-3424
183-3425
35 (metal pail)
16 (metal pail)
266-8563
35 (plastic pail)
16 (plastic pail)
183-3426
120 (keg)
54 (keg)
183-3427
400 (drum)
181 (drum)
183-3428
3500 (tote)
1588 (tote)
183-3429
1 Australia
Size
(lb)
(kg)
Part No.
14 oz (cartridge)
397 g (cartridge)
5P-0960
Feature
Contains 3 percent molybdenum disulfide
Benefit
Excellent load-carrying capacity for applications without temperature
or moisture extremes
129-1952
35 (metal pail)
16 (metal pail)
129-1924
35 (plastic pail)
16 (plastic pail)
7X-7699
120 (keg)
54 (keg)
9X-6489
400 (drum)
181 (drum)
7X-7701
3500 (tote)
1588 (tote)
129-1926
1 Australia
ID: D01417T1
Multipurpose Grease
Application
For use in grease fittings and lubrication points in low load, low speed applications
Multipurpose Grease NLGI Grade 2
Feature
Contains no molybdenum disulfide
Size
(lb)
(kg)
Part No.
Benefit
14 oz (cartridge)
397 g (cartridge)
1P-0808
129-1950
35 (metal pail)
16 (metal pail)
129-1919
35 (plastic pail)
16 (plastic pail)
7X-7664
120 (keg)
54 (keg)
9X-6488
400 (drum)
181 (drum)
7X-7665
3500 (tote)
1588 (tote)
129-1921
ID: D01423T1
1 Australia
Greases
03b.qxp
10/5/06
1:29 PM
Page 22
Greases
Application
Features
Features
Benefit
Benefits
Size
(lb)
Size
(kg)
13 oz (aerosol)
Part No.
(lb)
(kg)
Part No.
129-1968
14 oz (cartridge)
397 g (cartridge)
129-1938
14 oz (cartridge)
397 g (cartridge)
129-1966
35 (plastic pail)
16 (plastic pail)
129-1969
35 (metal pail)
16 (metal pail)
129-1942
35 (plastic pail)
16 (plastic pail)
129-1941
120 (keg)
54 (keg)
129-1943
400 (drum)
181 (drum)
129-1944
3500 (tote)
1588 (tote)
129-1946
1 Australia
ID: D01429T1
Features
Provides an extra tacky hold to stick to open gears and bearings
Contains 5 percent molybdenum disulfide for extra high loads
(kg)
Part No.
Benefits
35 (plastic pail)
16 (plastic pail)
129-8708
120 (keg)
54 (keg)
129-8709
400 (drum)
181 (drum)
129-8710
ID: D01519T1
129-1937
03b.qxp
10/5/06
1:29 PM
Page 23
Leak Detection
Leak Detection
Oil Dyes
Highly concentrated oil soluble dyes for adding color to lubricating oils, transmission oils, hydraulic oils and fuels
Visible at concentrations of 1 part in 10,000 or more. It only takes 30 ml (1 oz) to color 473 l (125 gal)
of light color oil
Use it to color code oils to prevent mixups
Use it to identify the source of leaks when more than one source is possible
Hint: For sumps with dark colored oil, use oil dyes which are visible in black light (ultraviolet) such
as 1U-5572 through 1U-5575
Part No.
Part No.
(EAME only)
Color
Size
9U-5031
185-4779
Red
240 ml (8 fl oz)
9U-5032
185-4781
Blue
240 ml (8 fl oz)
Qty.
ID: C79584T1
Part No.
Qty.
Description
Size
9U-6075
12
9U-6076
12
Description
Cat/Crown
Fault
Finder
Magnaflux
Spot
Check
Turco
By
Check
Sherwin
Dubl-Check
Met-LCheck
Min.
Ship.
Qty.
Penetrant,
Aerosol
4C-4804
SKL-S
By Check
DP-40
VP-31
12 each
Developer,
Aerosol
4C-4805
SKD-NF
By Check
D-100
D-70
12 each
ID: C27233T1
03b.qxp
10/5/06
1:29 PM
Page 24
Leak Detection
Part No.
Description
Recommended
Dosage
Size
1U-5573
1U-5575
1U-5577
Leak Detection
1U-5566 Black Light, 110 Volts
1U-6444 Black Light, 220 Volts
Handheld
An anodized aluminum lamp housing
Makes it easier and quicker to detect leaks in oil, fuel and cooling systems
Additives, available separately, can be put in the suspect system
and the leak point will show in the black light (ultraviolet light)
Instructions come with the kit
Also works with fluorescent penetrant kit
Optional light cover, made of heat-resistant neoprene rubber, helps protect
the user from possible burn injury, and also provides protection against
mechanical shock damage
ID: C41383T1
Service Parts
Part No.
Description
1U-5567
1U-5568
Optional Items
1U-5571
1U-5570
1U-5569
280-8147
120V/100 Watt Ultraviolet Spot Bulb, Medium Base, Average Intensity 7000 milliwatts
280-8144
120V/100 Watt Ultraviolet Spot Bulb, Ad Medium Base, Average Intensity 7000 milliwatts
03b.qxp
10/5/06
1:29 PM
Page 25
Part No.
(NACD only)
Part No.
(LACD/APD/EAME only)
Size
222-3117
222-3118
Leaves no residue
Cleans and dries quicklyno need for rinsing
Will not cause corrosion
Non-flammable material
Part No.
(NACD only)
Part No.
(LACD/APD/EAME only)
Size
222-3124
222-3119
ID: D00659T1
ID: D00689T1
Mineral Spirits
For use in solvent stands, immersion tanks, and manual cleaning equipment
Can be used with brush, rags, or spray
Has minimum flash point of 96C (205F) COC
High quality product with excellent solvency and is capable of being recycled
indefinitely through a solvent reclaiming still
If used in spray equipment, follow recommendations of spray equipment
manufacturer
Always follow precautions from Material Safety Data Sheet
Part No.
Part No.
(EAME only)
Size
Quantity
4C-6796
185-4756
18.93 l (5 Gal)
4C-6797
185-4757
ID: D00671T1
Part No.
Size
Pkg.
Qty.
269-1944
12
ID: D00683T1
03b.qxp
10/5/06
1:29 PM
Page 26
ID: D00653T1
ID: D00647T1
ID: D00623T1
ID: D00629T1
Size
222-3110
Quantity
12
18.9 l (5 gal)
1
ID: D00617T1
Description
Used to apply oil and water-based bulk chemicals, such as cleaners, degreasers,
231-7015
Steel Canister Sprayer
penetrating oils, solvents, or lubricants
231-7020
Brass Canister Sprayer
Compressed air sprayers provide a cost effective, reusable alternative to traditional
Service
Parts
spray cans (eliminates both storage and disposal concerns)
231-7016
Adjustable Tube
Caterpillar compressed air sprayeres use a special chemical-resistant internal seal
231-7017
Seal
which virtually eliminates seal replacement problems found in standard sprayers
231-7018
Nozzle
Eliminate using flammable and/or environmentally dangerous propellants
Canisters pressurized with compressed air from any standard air compressor
Both sprayers constructed with metal canisters (steel or brass), brass nozzles, and corrosion resistant internal parts
Steel canister sprayers are used for oil and solvent-based materials while brass canisters can also be used
for water-based materials
Cannot be used for paint application
Capacity: 0.9 l (32 oz)
ID: D00593T1
03b.qxp
10/5/06
1:29 PM
Page 27
Thread Lubricant
Moderate temperature
High torque
Prevents galling; eases disassembly
Completely transparent to SOS analysis
Use inside engines, transmissions, etc. where
SOS will be used and all highly torqued
undercarriage components
Extremely economical to use
Comes in brush-top can
ID: D01317T1
ID: C79591T1
Part No.
Part No.
(EAME only)
Size
Quantity
4C-5591
N/A
113 g (4 oz)
12
4C-5592
N/A
227 g (8 oz)
12
4C-5593
185-3989
12
Part No.
Part No.
(EAME only)
Size
5P-8937
186-1529
142 g (5 oz)
5P-9210
N/A
Quantity
ID: D00611T1
Part No.
Part No.
(EAME only)
Description
Size
Quantity
4C-5598
N/A
Brush-top can
113 g (4 oz)
12
4C-5599
N/A
Brush-top can
227 g (8 oz)
12
5P-3931
185-3990
Brush-top can
12
Aerosol
222-3114
Molybdenum Paste
Part No.
Part No.
(EAME only)
Size
Qty.
8T-2998
185-4758
236 ml (8 fl oz)
12
ID: C33335T1
Part No.
Part No.
(EAME only)
Size
Qty.
6V-4876
186-1531
1
ID: C79552T1
03b.qxp
10/5/06
1:29 PM
Page 28
ID: C33339T1
Part No.
Part No.
(EAME only)
Size
Qty.
6V-2055
186-1530
ID: C33340T1
Part No.
Part No.
(EAME only)
Size
151-1340
185-4002
9 ml (.33 fl oz)
Silicone Fluids
Silicone Lubricant
For fan drive assemblies and clutches with viscous fluid drives
Silicone grease
Extreme temperature resistance
Lubricant for rubber boots on Caterpillar flexible drive couplings
on marine engines
Not for use on silicone O-rings (yellow or white) or hoses
Part No.
Qty.
Size
8M-0553
150 cc
150 cc
300 ml
ID:Part
D01669T1
No.
5N-5561
Part No.
(EAME only)
Size
Qty.
186-1528
10
03b.qxp
10/5/06
1:29 PM
Page 29
Part No.
Part No.
(EAME only)
Size
153-8538
185-5131
3.785 l (1 gal)
ID: C79518T1
Part No.
Part No.
(EAME only)
Qty.
Size
1U-9763
N/A
12
.95 l (1 qt)
1U-9764
185-4772
3.79 l (1 gal)
ID: C79536T1
Capacity
Size
Quantity
1 l (33.8 oz)
ID: C79599T1
ID: C79551T1
03b.qxp
10/5/06
1:29 PM
Page 30
Part No.
Part No.
(EAME only)
Size
207-1601
207-1600
.95 l (1 quart)
Contains no soaps
Leaves no residue will not rust rims
Helps seal tire to rim without bonding
Reduces bead damage
Nontoxic, odorless
ID: C79570T1
Part No.
Part No.
(EAME only)
Qty.
1U-8805
185-5125
3.79 l (1 gal)
1U-6516
N/A
18.9 l (5 gal)
1U-6517
N/A
Size
ID: C33265T1
V.C.I. Oil
Part No.
Part No.
(EAME only)
Qty.
Size
1U-8808
185-5126
3.79 l (1 gal)
Reference
1U-6520
N/A
ID: C41309T1
ID: C44120T1l
Part No.
Part No.
(EAME only)
Qty.
Description
4C-6792
N/A
12
.95 l (1 qt)
4C-6793
185-4769
3.78 l (1 gal)
4C-6794
185-4770
18.93 l (5 gal)
4C-6795
N/A
03b.qxp
10/5/06
1:29 PM
Page 31
Part No.
4C-6767
Part No.
(EAME only)
185-4759
Qty.
1
Size
Part No.
Part No. (EAME only)
Qty.
20 l (5 gal)
1U-8809
185-5127
3.79 l (1 gal)
1U-6523
N/A
ID: C44123T1
Size
ID: C44118T1
Part No.
Part No.
(EAME only)
Qty.
1U-8801
185-5123
3.79 l (1 gal)
1U-6526
N/A
Size
ID: C79578T1
ID: C44119T1
Part No.
Part No.
(EAME only)
Size
Qty.
Grit
226-6624
N/A
240 ml (8 fl oz)
80
4C-4178
185-5156
3.79 l (1 gal)
40
4C-4179
N/A
18.9 l (5 gal)
40
4C-4180
N/A
40
Retains O-rings in the groove in O-ring face seal (ORFS) fittings during assembly
Holds in both horizontal and vertical positions
Non-toxic
Will not harm hydraulic system components
Not for use on air conditioning systems
Part No.
Part No.
(EAME only)
Size
Qty.
1U-6396
185-4776
12
236 ml (8 fl oz)
1U-6395
185-4777
3.79 l (1 gal)
ID: C79597T1
Compactor Oil
03b.qxp
10/5/06
1:29 PM
Page 32
Governor Oil
Model: 3600 Engine
Part No.
Part No.
(EAME only)
Qty.
Size
136-9642
185-4775
.95 l (1 qt)
Part No.
Part No.
(EAME only)
Qty.
9U-7251
N/A
12
.94 l (1 qt)
9U-7252
3.79 l (1 gal)
9U-7253
18.9 l (5 gal)
9U-7254
Size
ID: C79527T1
Part No.
Part No.
(EAME only)
Size
Qty.
1U-9891
185-4771
12
ID: C79569T1
Oil Stabilizer
Part No.
Part No.
(EAME only)
Qty.
Size
143-3655
185-4774
12
.94 l (1 qt)
3406E
C-15
6NZ1-82494
C-16
7CZ1-Up
ID: C79574T1
03b.qxp
10/5/06
1:29 PM
Page 33
Brake Fluid
Meets DOT and SAE requirements
Part No.
(EAME only)
Qty.
Size
4C-5584
N/A
12
0.47 l (1 pt)
4C-5585
N/A
12
.94 l (1 qt)
4C-5586
185-4663
3.79 l (1 gal)
Part No.
DOT 3
DOT 3
DOT 5
DOT 5
4C-5588
N/A
12
.94 l (1 qt)
4C-5589
185-4664
3.79 l (1 gal)
ID: C44249T1
Part No.
Qty.
Size
Element
4C-8339
4C-8340
4C-8341
4C-8342
4C-8343
4C-8339
236 ml (8 fl oz)
Ag
10 ppm
25 ppm
100 ppm
4C-8340
236 ml (8 fl oz)
AL
10 ppm
25 ppm
100 ppm
4C-8341
236 ml (8 fl oz)
Cr
5 ppm
10 ppm
25 ppm
4C-8342
236 ml (8 fl oz)
Cu
10 ppm
25 ppm
100 ppm
500 ppm
4C-8343
236 ml (8 fl oz)
Fe
10 ppm
25 ppm
100 ppm
500 ppm
150 ppm
4C-8344
Consists of:
1 each 4C-8339
1 each 4C-8340
1 each 4C-8341
1 each 4C-8342
1 each 4C-8343
Mg
10 ppm
25 ppm
100 ppm
Mo
5 ppm
10 ppm
25 ppm
N2
10 ppm
25 ppm
100 ppm
500 ppm
Ni
10 ppm
25 ppm
100 ppm
Pb
10 ppm
25 ppm
100 ppm
Si
10 ppm
25 ppm
100 ppm
500 ppm
Sn
10 ppm
25 ppm
100 ppm
Zn
10 ppm
25 ppm
100 ppm
Calibration Fluid
Fuel injection test benches
Pop Testers
Part No.
Part No.
(EAME only)
Qty.
Size
9U-7411
N/A
3.79 l (1 gal)
6V-6068
185-4665
18.9 l (5 gal)
6V-6067
N/A
ID: C44121T1
03c.qxp
10/5/06
1:29 PM
Page 34
Specialty Products
Specialty Products
8T-9018 Radiator Repair
ID: C79520T1
Part No.
Part No.
(EAME only)
Size
2P-2333
207-7529
Qty.
ID: C33328T1
Ether Cylinder
Part No.
Part No.
(EAME only)
Qty.
Size
7N-0296
130-8414
N/A
12
227 g (8 oz)
7N-0296
187-4851
24
7X-1062
187-4852
12
7X-1062
Fits most 3500 series engine applications ID: C44122T1
Comes with specially designed filter and foam disc collar to keep impurities out of the system
Part No.
Size
Pkg.
Qty.
269-8292
24
ID: D01657T1
03c.qxp
10/5/06
1:29 PM
Page 35
Specialty Products
Part No.
Size
Pkg.
Qty.
269-1949
12
ID: D01651T1
Anti-Spatter Compound
Part No.
Size
Pkg.
Qty.
272-5745
12
Qty.
Size
4C-4217
12
207 ml (7 fl oz)
4C-4218
12
ID: C44041T1
Part No.
Part No.
(EAME only)
Description
Size
Qty.
9U-5026
N/A
Orange Hand
Cleaner (smooth)
12
9U-5027
185-4000
Orange Hand
Cleaner (smooth)
3.8 l (1 gal)
9U-5028
N/A
Orange Hand
Cleaner (w/ pumice)
12
9U-5029
185-4001
Orange Hand
Cleaner (w/ pumice)
3.8 l (1 gal)
9U-5030
All 1 gallon jugs come with individual pumps included. 7.5 fl.oz. bottles have
self-sealing flip top caps.
ID: C79581T1
ID: C41473T1
03c.qxp
10/5/06
1:29 PM
Page 36
Specialty Products
Item
Part No.
Description
Size
191-6310
15 oz
191-6311
128 oz
ID: C80422T1
Towel Size
Quantity
Minimum purchase
144-3393
266 x 311.2 mm
(10.5 x 12.25 in)
72 per bucket
1 case
144-3394
203 x 311.2 mm
(8.0 x 12.25 in)
Part No.
Size
269-1937
Pkg.
Qty.
Part No.
Size
Pkg.
Qty.
269-1939
ID: D01627T1
ID: D01633T1
03c.qxp
10/5/06
1:29 PM
Page 37
Specialty Products
Deodorizer/cleaner
Part No.
Size
Package
Quantity
Part No.
Size
Package
Quantity
269-8271
269-1948
Ice Foe
Part No.
Size
Package
Quantity
269-1941
Part No.
Size
Package
Quantity
269-1950
Part No.
Size
Package
Quantity
269-1942
12
Part No.
Size
Package
Quantity
280-1555
36
ID: D01639T1
03c.qxp
10/5/06
1:29 PM
Page 38
Paints
Paints
Caterpillar Enamel Topcoats
Pure, lead free industrial enamel suitable for interior or exterior use on earthmoving,
construction and material handling equipment, trucks, engines, machinery, and metal buildings
Formulated to produce a finish that sets up in minutes, is tack-free in a few hours,
and dries overnight to a hard film
Very resistant to fading, chalking, cracking, and chipping
Can be applied directly to either wood or metal without using a primer
Part No.
Description
Package
Quantity
Size / Type
261-7012 1
12
4C-4200
12
206-6417
12
4C-4202
12
243-5451
12
4C-4198
12
4C-5842
12
4C-5843
12
9U-7946
12
9U-7948
12
9U-7950
12
127-4966
12
127-4967
12
140-2576
12
173-4060
12
243-5459
12
261-7013 1
4C-4184
4C-4192
19 l (5 Gal) Pail
4C-4207
4C-6129
4C-6122
19 l (5 Gal) Pail
4C-6127
4C-4185
4C-4193
19 l (5 Gal) Pail
4C-4208
4C-4186
243-5450
249-1817
19 l (5 Gal) Pail
4C-4183
4C-4191
19 l (5 Gal) Pail
4C-4206
9U-7947
9U-7949
243-5458
9U-7951
03c.qxp
10/5/06
1:29 PM
Page 39
Paints
Description
Package
Quantity
Size / Type
140-2577
140-2578
19 l (5 Gal) Pail
225-6502
9U-7714
9U-7719
9U-7720
19 l (5 Gal) Pail
249-1816
9U-7717
9U-7718
19 l (5 Gal) Pail
9U-7725
9U-7726
19 l (5 Gal) Pail
9U-7731
9U-7732
19 l (5 Gal) Pail
249-1815
Power Module White Paint High Gloss Water Reducible 2.8 VOC 4
249-1814
Power Module White Paint High Gloss Water Reducible 2.8 VOC 1
19 l (5 Gal) Pail
1 For
Part No.
Part No.
Description
Package
Quantity
Size / Type
4C-4190
4C-4197
19 l (5 Gal) Pail
4C-4211
4C-4205
12
Part No.
Description
9U-7721
Package
Quantity
Size / Type
Part No.
Description
Package
Quantity
Size / Type
9U-7723
Urethane Hardener
Part No.
Description
Package
Quantity
Size / Type
4C-4189
4C-4196
19 l (5 Gal) Pail
4C-4210
03c.qxp
10/5/06
1:29 PM
Page 40
Paints
Part No.
Description
4C-6130
Package
Quantity
Size / Type
Part No.
Description
Package
Quantity
Size / Type
9U-6360
Part No.
Description
Package
Quantity
Size / Type
Part No.
Description
Package
Quantity
Size / Type
263-6148
12
4C-4199
12
263-6151
Caterpillar Aluminum-Safe
Paint Stripper
Strips iron, steel, even aluminum parts without damage or discoloration
Useful in cold tanks
Can be used warm [up to 65.6C
(150F)] for faster cleaning
Just soaks the paint off
Part No.
Description
Package
Quantity
Size / Type
4C-8651
3.8 l (1 gal)
4C-8652
18.9 l (5 gal)
4C-8653
nomen.qxd
9/15/06
2:17 PM
Page 1
Nomenclature Index
A
ABRASIVE
ADAPTER
2-8
BELT
2-24
BRUSH
2-4, 2-11, 2-18
CLEANING
2-19
CRANKSHAFT
2-24
CUT-OFF WHEEL
2-20
CUTTING
2-20
DEBURRING
2-26
DISC
2-6, 2-10, 2-12 to 14
EMERY PAPER
2-23
FILE
2-27
FLAP BRUSH
2-5
FLAP WHEEL
2-18 to 19
GRINDING
2-13, 2-17 to 20
GRINDING WHEEL
2-17
HOLDER
2-11
MANDREL
2-20
PAD
2-15, 2-22
POLISHING
2-24
RECONDITIONING
2-12
SANDING
2-15, 2-22, 2-24
SURFACE RECONDITIONING
2-3 to 6,
2-10 to 14, 2-17 to 20,
2-22, 2-24, 2-26
VALVE STEM
2-18
WHEEL
2-17 to 20
WIRE BRUSH
2-3 to 4
ACCESSORY
ADAPTER
2-49, 2-113
AIR
1-73
BOX
1-85
CABINET
1-79
CASE
1-85
DISC
1-73
DRILL
2-21, 2-30
DRILL SHARPENING
2-21
EXTENSION
2-30
FLOOR MAT
2-110
FLUID EXTRACT TOOL 2-49, 2-112 to 114
FLUID SAMPLING
2-49, 2-112 to 114
GRINDING
1-73, 2-21
HAND OPERATED
1-73
HAND TOOL
1-64
HOSE
1-73
HYDRAULIC
1-64
HYDRAULIC WRENCH
1-63
INSERT
2-56
JAW CAP
2-57
JAW INSERT
2-56 to 57
LIFTING
1-8, 1-89
MUD FLAP
2-112
O-RING SEAL
2-49, 2-112 to 114
OIL
2-49, 2-112 to 114
PIPE VISE
2-56
PLATE
1-89
REACTION ARM
1-63
REDUCER
2-49, 2-113
REPAIR PART
2-49, 2-112 to 114
SEAL
2-49, 2-112 to 114
SHACKLE
1-8, 1-89
SHOP
2-110
SLING
1-8, 1-89
STAINLESS STEEL
1-79
STORAGE
1-85
SURFACE RECONDITIONING 1-73, 2-21
TOOL STORAGE
1-79
VISE
2-56 to 57
WHEEL
2-21
WRENCH
1-64
ACID
COIL CLEANER
DESCALANT
HYDROSOLV CLEANER
PHOSPHORIC
PRESSURE WASHER
SCALE
3-10
3-10
3-10
3-10
3-10
3-10
ADAPTER
ABRASIVE
2-8
ADAPTER cont.
AEROSOL cont.
ACCESSORY
2-49, 2-113
ADAPTER GROUP
2-7, 2-10
BEARING
1-48, 1-59
BOX WRENCH
1-59
BUSHING
1-48
CARRYING CASE
2-110
CYLINDER
1-22 to 23
DISC
2-16 to 17
DRIVER
1-59
ELECTRICAL PRODUCT
2-110
FLUID EXTRACT TOOL
2-49, 2-113
FLUID SAMPLING
2-49, 2-113
FLYWHEEL
1-39
GRINDING
2-16 to 17
HAND TOOL
1-1 to 2, 1-5 to 6, 1-9, 1-12,
1-15, 1-22, 1-48, 1-54, 2-18
HOLDER
2-16 to 17
HYDRAULIC
1-22 to 23
MAIN BEARING
1-59
MAIN CAP
1-59
MANDREL
2-16 to 17
MICROFILM VIEW
2-110
MULTIPLIER
1-22 to 23
OIL
2-49, 2-113
OPEN END WRENCH
1-12
PIN REMOVER
1-48
RACE
1-48
REDUCER
2-49, 2-113
REPAIR
1-22 to 23
REPAIR PART
1-12, 1-39
SERVICEMANS HAND TOOL
1-1 to 2,
1-12, 1-22
SOCKET
1-1 to 2, 1-5 to 6, 1-9,
1-15, 1-22, 1-54
STAND
1-22 to 23
SURFACE RECONDITIONING 2-16 to 18
TOOL
1-59
TOOL GROUP
2-18
TOOL SET
1-1 to 2, 1-12, 1-22
TORQUE
1-22 to 23, 1-59
TORQUING TOOL
1-59
TRANSFORMER
2-110
WHEEL
2-16 to 17
WRENCH
1-12, 1-59
OIL
PAINT
PAINT PRODUCTS
PAINT REMOVER
PENETRANT
PENETRANT FOR CRACK
DETECTION
PENETRATE OIL
RUST PENETRATING
RUST PREVENTIVE
SOLVENT
ADHESIVE
ADHESIVE & SEALANT
3-1, 3-4 to 5
APPLICATOR
3-5
BONDING
3-1, 3-4 to 5, 3-7 to 8, 3-34
CAULKING
3-7 to 8
CHEMICAL
3-7 to 8, 3-21, 3-31
COMPOUND
3-31
EPOXY
3-34
FLEXIBLE
3-6
FUEL TANK REPAIR KIT
3-34
GASKET MATERIAL
3-6
HEAT
3-8
LAPPING
3-31
LAPPING COMPOUND
3-31
LIQUID GASKET
3-6
LUBRICANT
3-7 to 8, 3-21, 3-31
MIXER
3-5
NOZZLE
3-5
NYLON
3-34
PRIMER
3-8
SEALANT
3-3 to 6, 3-8, 3-34
SILICONE
3-7 to 8
WINDOW
3-8
WINDOW INSTALLATION
3-8
WINDSHIELD
3-7 to 8
AEROSOL
BATTERY
CABLE
CHAIN
CLEANING
COMPOUND
CRACK DETECTION
DETECTION
DEVELOPER
DEVELOPER FOR CRACK
DETECTION
INSPECTION
LIQUID PENETRANT KIT
LUBRICANT
3-26
3-26
3-26
3-26
3-40
3-23
3-23
3-23
ASSEMBLY cont.
3-26
3-38
3-25, 3-38
3-40
3-23
3-23
3-26
3-26
3-26
3-25
3-29
3-29
3-29
AIR CONDITIONING
AIR CONDITION TOOL
AIR TOOL OIL
COMPRESSOR
FLUSHING
PUMP OIL
REFRIGERANT
SOLVENT
VACUUM PUMP
3-29
3-29
3-29
3-29
3-29
3-29
3-29
3-29
AIR POWERED
ADHESIVE & SEALANT
CAULKING
CLEANING
GUN
PNEUMATIC
PNEUMATIC TOOL
3-10
3-10
3-10
3-8, 3-10, 3-25
3-10
3-10, 3-25
3-8, 3-10, 3-25
3-10
3-10
3-8, 3-25
3-10, 3-25
ALLEN WRENCH
HAND TOOL
HEX BIT SET
HEX KEY WRENCH
WRENCH
ALUMINUM
TAPE
2-118, 2-125
AMMETER
CARRYING CASE
CASE
DIAGNOSTIC
MEASURING
PLASTIC CASE
REPAIR PART
1-85
1-85
1-85
1-85
1-85
1-85
ANTI-FREEZE
ADDITIVE
ANTI-FREEZE ADDITIVE
ANTI-FREEZE CONCENTRATE
CHEMICAL
COOLANT
DISTILLATION
HOSE
PNEUMATIC
PNEUMATIC TOOL
3-12
3-12
3-12
3-35
3-12 to 13
3-12
3-35
3-35
3-35
APPLICATOR
ADHESIVE
3-5
ASSEMBLY
3-23
3-23
3-23
3-26
BRAKE
CLUTCH
COMPOUND
COUPLING
1-8
1-16
3-31
1-16
1-8
1-15
1-16
1-8
1-88
3-31
2-49
1-8
1-16
2-49
1-88
1-15 to 16, 1-31
1-43
1-8
1-88
2-49
1-43
ATTACHMENT
BRACKET
HARD HAT
2-49
3-28
3-31
1-8
2-90
2-90
AXLE
DRIVE LINE
3-7
3-7
1-73 to 74
1-73 to 74, 3-7
1-73 to 74
1-73 to 74
ALKALINE
ALUMINUM SAFE
CABINET WASHER
CHEMICAL
CLEANING
CONCENTRATE
DEGREASER
DETERGENT
HYDROSOLV CLEANER
PRESSURE WASHER
RUST PROTECTION
SOAP
DIFFERENTIAL
DISASSEMBLY TOOL
DISPENSER KIT
DRIVE
GAUGE GROUP
HEX BIT SET
HYDRAULIC
HYDROSTAT
LIFTING
O-RING
PLUG
PRESSURE
PUMP
SEAL
SLING
SOCKET
SOCKET WRENCH
TESTING
TRANSMISSION
TRANSPARENT
WRENCH
1-31
B
BALLAST
CHOP SAW
ELECTRIC LIGHT
FLUORESCENT LIGHT
LIGHT
PORTABLE LIGHT
TUBE
WORK LIGHT
2-72
2-72
2-72
2-72
2-72
2-72
2-72
BAR
BLADE
1-46
BREAKER BAR
1-1 to 9, 1-12, 1-20, 1-46
CROW BAR
1-2 to 9, 1-46
HAND TOOL
1-6, 1-9
JIMMY BAR
1-2 to 9, 1-46
PRY BAR
1-1 to 9, 1-12, 1-20, 1-46
REACTION
1-34
SERVICEMANS HAND TOOL
1-1, 1-3,
1-12, 1-20
SOCKET
1-43
TOOL SET
1-1, 1-3, 1-12, 1-20
TORQUE
1-61
WRENCH
1-43, 1-61
BASE
HAND TOOL
MULTIPLIER
UNIT
1-85
1-23
1-23
BATTERY
AEROSOL
AUTOMOTIVE
BATTERY POST SET-POS/NEG
BATTERY STARTING SYSTEM
BOOSTER
BOOSTER CABLE BATTERY
BULB
CABLE
CLAMP
CLEANING
COMMERCIAL
CORDLESS
DIAGNOSTIC
ELECTRICAL PRODUCT
EXTRA HEAVY DUTY
FLASHLIGHT
GREASE GUN
INSPECTION LIGHT
JUMPER CABLES BATTERY
LAMP
LEXAN PLUG STARTING SYS
LIGHT
LIGHTING
3-26
2-65
2-62
2-61 to 63
2-61 to 63
2-61 to 62
2-67 to 68
2-61 to 63
2-61 to 62
3-26
2-65
1-75 to 76
2-69
2-68 to 69
2-63
2-67 to 69
1-57
2-68 to 69
2-61
2-67 to 68
2-62
2-68 to 69
2-70
nomen.qxd
9/15/06
2:17 PM
Page 2
Nomenclature Index
BATTERY cont.
LUBRICATION
MAINTENANCE AIDS
MARINE ENGINE
MEASURING
MOUNTED
PERSONAL USE
PLUG-IN STARTING SYS
POLARITY
POWER
PROTECTIVE
RECHARGEABLE SYSTEM
SAFETY
SERVICE VEHICLE
SOCKET
BIT cont.
1-57
3-26
2-65
2-69
2-62
2-68 to 69
2-62 to 63
2-62
2-61 to 63
3-26
2-69
2-68 to 69
2-62
2-61 to 63
BATTERY CHARGER
BATTERY CHARGER RACK
2-59
BOOSTER
2-59 to 60
BUS BAR SET BATT CHARGER
2-59
CHARGER
2-59 to 60, 2-69
COMMERCIAL
2-60
FAST-BATTERY CHARGER
2-60
MULTI-BATTERY
2-59
PORTABLE
2-60
RECHARGER
2-59 to 60
BATTERY SERVICE
EQUIPMENT
GROWLER ARMATURE TEST
TESTER
2-60
2-60
2-96
2-96
2-96
2-96
3-29
3-29
3-29
3-29
3-29
3-29
BEARING
ADAPTER
HAND TOOL
MAIN BEARING
MAIN CAP
MEASURING
MEASURING TOOL
PIN REMOVER
RACE
TOOL
TORQUE
WRENCH
1-48, 1-59
1-48
1-59
1-59
1-53
1-53
1-48
1-48
1-59
1-59
1-59
BELT
ABRASIVE
CRANKSHAFT
POLISHING
SANDING
SURFACE RECONDITIONING
2-24
2-24
2-24
2-24
2-24
BENCH
CASE
INSERT
PEDESTAL
SURFACE RECONDITIONING
WHEEL
1-85
1-85
2-21
2-21
2-21
BIT
AIR REGULATED
AIRCRAFT DRILL
COBALT DRILL
DRILL
REPLACEMENT
SOCKET
STANDARD
WRENCH
2-28, 2-30,
2-38 to 39, 2-41 to 42
1-31
1-5, 1-31, 1-43
2-28 to 29, 2-38 to 39
1-31
2-30
2-30
2-29
2-28 to 30, 2-38 to 39,
2-41 to 42, 2-46
ENGINE
1-15
ENGINE TOOL
1-15, 2-28
EXTRA HEAVY DUTY
2-29
HAND TOOL
1-8 to 9, 1-15, 1-45
HEX BIT SET
1-15, 1-31
HEX WRENCH DISPLAY
1-31
METRIC
2-30, 2-41 to 42
SCREW
SCREW EXTRACTOR
SERVICEMANS HAND TOOL
STUD REMOVER
TOOL SET
2-44 to 45
2-44 to 45
2-44 to 45
2-46 to 47
2-44 to 45
BONDING
BLACK LIGHT LEAK
DETECTION
CARRYING CASE
DIAGNOSTIC
ELECTRIC
FILTER
FLUORESCENT
LEATHER JACKET
LIGHT
PERSONAL USE
RADIANT HEATER
SAFETY GLASSES
ULTRA-VIOLET LEAK DETECTION
3-24
3-24
3-24
3-24
3-24
3-24
3-24
3-24
3-24
3-24
3-24
BLADE
BAR
1-46
BREAKER BAR
1-46
HACKSAW
1-3, 1-45, 1-76
HAND TOOL
1-3, 1-45, 1-54, 1-76
KNIFE
1-54
RAZOR BLADE
2-27
RAZOR KNIFE
1-54
REPLACEMENT
1-54
SABER
1-45, 1-76
SAW
1-3, 1-45, 1-76
SERVICEMANS HAND TOOL 1-45, 1-54,
1-76
TOOL
1-45
UTILITY KNIFE
1-54
BLANKET
BEADLESS TIRE
LUBRICANT
MOUNTING TIRE
POWER TRAIN TOOL
RIM LUBRICANT
RUBBER
WHEEL & TIRE
REDUCED SHANK
FIRST AID
FIRST AID BLANKET
PERSONAL USE
SAFETY
WELDING PROTECTION
2-79
2-79
2-79
2-79
2-79
BLOCK
BOX
CASE
CHEMICAL
COMPRESSOR
ENGINE REPAIR
FOAM
FOAM PAD
GROUP
HAND TOOL
HYDROSTAT
INSERT
PACKING
PADDING
PLASTIC CASE
POWER TRAIN TOOL
REPAIR PART
STORAGE
TAPE
TORQUE
WHEEL & TIRE
WRENCH
1-85
1-61, 1-85
3-2
1-85
3-2
1-61, 1-85
1-85
1-85
1-50
1-85
1-61, 1-85
1-85
1-61, 1-85
1-85
1-85
1-61, 1-85
1-61, 1-85
3-2
1-61
1-85
1-61
BOLT EXTRACTOR
BOLT REMOVER
COLLET
EXTRACTOR
HAND TOOL
HOUSING
SCREW
SCREW EXTRACTOR
SERVICEMANS HAND TOOL
STUD REMOVER
TOOL SET
2-44 to 46
2-46
2-46
2-44 to 45
2-46
2-44 to 45
2-44 to 45
2-44 to 45
2-46
2-44 to 45
BOLT REMOVER
BOLT EXTRACTOR
COLLET
EXTRACTOR
HAND TOOL
HOUSING
2-44 to 46
2-46
2-46 to 47
2-44 to 45
2-46
ADHESIVE
3-1, 3-4 to 5, 3-7 to 8, 3-34
ADHESIVE & SEALANT 3-1, 3-4 to 5, 3-7
CAULKING
3-7
EPOXY
3-5, 3-34
FLAMMABLE
3-4
FLEXIBLE GASKET
3-7
FORM-IN-PLACE GASKET
3-7
FUEL TANK REPAIR KIT
3-34
GASKET MATERIAL
3-7
HIGH TEMP
3-7
MIXER CUP
3-5
NYLON
3-34
R.T.V.
3-7
RUBBER
3-7
SEALANT
3-4, 3-34
SILICONE
3-7 to 8
WINDOW INSTALLATION
3-8
WINDSHIELD
3-7 to 8
BOOSTER
BATTERY
BATTERY CHARGER
BATTERY CHARGER RACK
BATTERY STARTING SYS
BUS BAR SET BATT CHARGER
CABLE
CHARGER
COMMERCIAL
EXTRA HEAVY DUTY
FAST-BATTERY CHARGER
LEXAN PLUG STARTING SYS
MOUNTED
MULTI-BATTERY
PLUG-IN STARTING SYS
POLARITY
PORTABLE
POWER
RECHARGER
SERVICE VEHICLE
SOCKET
2-61 to 63
2-59 to 60
2-59
2-61 to 63
2-59
2-61 to 63
2-59 to 60
2-60
2-63
2-60
2-62
2-62
2-59
2-62 to 63
2-62
2-60
2-61 to 63
2-59 to 60
2-62
2-61 to 63
BRAKE
ASSEMBLY
AUTO BRAKE FLUID
COLUMN
CYLINDER
FLUID
HAND TOOL
HI TEMP BRAKE FLUID
HITCH
HOUSING
MAINTENANCE AIDS
MOISTURE RESIS BRAKE FLUID
PLUG
SEAL
SHOP FLUID
SOCKET
SPRING
STEERING
SUPPORT
TAP
TRANSPARENT
2-49
3-33
2-35
1-33
3-33
1-36
3-33
1-33
2-35
3-33
3-33
2-49
2-49
3-33
1-33
1-36
2-35
2-35
2-35
2-49
BREAKER BAR
BAR
BLADE
CROW BAR
HAND TOOL
BRUSH
ADAPTER
1-59
EXTENSION
1-2 to 3, 1-51, 1-59
FRAME & HITCH TOOL
1-39
HAND TOOL
1-39, 1-59
POWER TRAIN TOOL
1-59
SERVICEMANS HAND TOOL
1-39
SUSPENSION
1-39
TOOL SET
1-39
TORQUE
1-2 to 3, 1-51, 1-59
TORQUING TOOL
1-59
WRENCH
1-2 to 3, 1-39, 1-51, 1-59
ABRASIVE
2-4, 2-11, 2-18
CLEANING BRUSH
2-4 to 5
CYLINDER
2-4
GRINDING
2-18
HAND TOOL
1-55 to 56
HOLDER
2-11
PAINT
1-56
POLISHING
2-5
REPAIR GROUP
3-2
SCRATCHER BRUSH
1-55 to 56
SERVICEMANS HAND TOOL 1-55 to 56
SURFACE RECONDITIONING
2-3 to 5,
2-11, 2-18
TRACK
3-2
TUBE BRUSH
2-5
VALVE STEM
2-18
WHEEL
2-3, 2-18
WIRE
2-3
WIRE BRUSH
2-4
BRACE
BULB
BOX WRENCH
PIPE VISE
2-58
BRACKET
ATTACHMENT
BOLT
CRANKSHAFT
ENGINE TOOL
FUEL SYSTEM TOOL
FUEL TANK TOOL
GRINDING
HARD HAT
HOIST
HOLDER
INDICATOR
LIFTING
LINER
LINK
REMOVAL
SUPPORT
SURFACE RECONDITIONING
TRANSMISSION
VALVE STEM
WHEEL
2-90
2-129
1-88
1-88
1-88
1-88
2-16 to 18
2-90
1-88
2-16 to 18
2-129
1-88
1-88
1-88
2-129
2-16 to 18
2-16 to 18
2-129
2-16 to 18
2-16 to 18
BATTERY
2-67 to 68
ELECTRIC LIGHT
2-71 to 72
ELECTRICAL PRODUCT
2-110
FLASHLIGHT
2-67 to 68
FLUORESCENT LIGHT
2-71
LAMP
2-67 to 68, 2-71 to 72, 2-110
LIGHT
2-71
MICROFILM VIEW
2-110
PORTABLE LIGHT
2-71
TRANSFORMER
2-110
ULTRA-VIOLET LEAK DETECTION
3-24
BUSHING
ADAPTER
HAND TOOL
PIN REMOVER
1-48
1-48
1-48
C
CABINET
ACCESSORY
COVER
1-79
1-80
nomen.qxd
9/15/06
2:17 PM
Page 3
Nomenclature Index
CABINET cont.
HAND TOOL
LOCK
SERVICEMANS HAND TOOL
STORAGE
TOOL BOX
TOOL CHEST
TOOL STORAGE
TOP DECK
WAREHOUSE EQUIPMENT
CASE cont.
1-82 to 83
1-82
1-82 to 83
1-80 to 83
1-80 to 83
1-82 to 83
1-79
1-80
1-82
CABLE
AEROSOL
BATTERY
BATTERY STARTING SYS
BOOSTER
CHAIN
ELECTRICAL
FASTENER
LUBRICANT
NON-AEROSOL
PLUG-IN STARTING SYS
POWER
RUST PENETRATING
RUST PREVENTIVE
SOCKET
TIE
3-26
2-61 to 63
2-61 to 63
2-61 to 63
3-26
2-124, 2-129
2-124, 2-129
3-26
3-26
2-62
2-61 to 63
3-26
3-26
2-61 to 63
2-124, 2-129
CALIBRATION FLUID
CHEMICAL
DIESEL FUEL
FUEL
FUEL INJECTOR
INJECTION
INJECTOR
3-33
3-33
3-33
3-33
3-33
3-33
CALIPER
ENGINE LIFTING & POSITIONING
ENGINE OVERHAUL
ENGINE RE-BUILD
ENGINE REPAIR
ENGINE ROLL-OVER TOOL
WASHER
2-129
2-129
2-129
2-129
2-129
2-129
CAMSHAFT
BREAK-IN LUBRICANT
EXTENSION
EXTREME PRESSURE LUBE
LUBRICANT
TORQUE
3-27
1-59
3-27
3-27
1-59
CANDLE
AIR LEAK DETECTION
BOMB
LEAK DETECTION
SMOKE CANDLE
3-23
3-23
3-23
3-23
CAP
HOSE
NIPPLE
PLUG
POWER TRAIN
PRESSURE
PROTECTION
PROTECTOR
QUICK DISCONNECT
SAFETY GOGGLES
SCREW
STORAGE
TESTING TOOL
UN-VALVED
2-52 to 55
1-8
2-49 to 55
1-8
1-8
2-52 to 55
2-49 to 50
1-8
2-54
2-129
2-52 to 55
1-8
1-8
CARTRIDGE
GREASE
LUBE EQUIPMENT
LUBRICANT SYSTEM
3-21
3-21
3-21
CASE
ACCESSORY
ADHESIVE & SEALANT
AMMETER
BENCH
BEVEL GEAR
BLOCK
BOX
CARRYING CASE
1-85
1-85
1-85
1-85
2-35
1-61, 1-85
1-85 to 87
1-85, 1-87
COMPRESSOR
CONNECTOR
DIAGNOSTIC
DIE SET
DIVIDER
DIVIDER KIT
FOAM
FOAM BLOCK
FOAM PAD
FUEL PUMP TOOL
FUEL SETTING
FUEL SYSTEM TOOL
GOVERNOR TOOL
GROUP
HAND TOOL
INSERT
LINER
MEASURING
MEASURING TOOL
O-RING
O-RING KIT
PACKING
PADDING
PELICAN
PLASTIC
PLASTIC CASE
POWER TRAIN
PROTECTOR
REPAIR PART
REPLACEMENT
SERVICE PART
STEERING CLUTCH
STORAGE
STORE CABINET
SURE SEAL
TAP
TESTER
TIMING
TOOL GROUP
TORQUE CONTROL TOOL
TRANSMISSION
UNIT INJECTOR TOOL
VIBRATION
WIRING TESTER
1-85
1-86
1-85
2-33
1-85
1-85
1-61, 1-85, 1-87
1-85
1-85
1-85
1-85
1-85
1-85
1-85
1-48
1-61, 1-85, 1-87
1-85
1-85
1-85
1-87
1-86
1-85
1-61, 1-85, 1-87
1-87
1-85
1-85, 1-87
1-85
1-87
1-61, 1-85
1-87
1-85
2-35
1-61, 1-85 to 87
1-85
1-86
2-35
1-85
1-85
1-85
1-85
1-85
1-85
1-87
1-85
CENTERING
BOLT
STEERING
TEST GROUP
TOOL
TRAVEL MOTOR D&A TOOLS
WASHER
2-129
1-61, 2-129
1-61, 2-129
1-61, 2-129
1-61, 2-129
1-61, 2-129
CHAIN WRENCH
CHAIN
CYLINDER
DIFFERENTIAL
HAND TOOL
HANDLE
HOSE ASSEMBLY TOOL
HYDRAULIC
HYDRAULIC CYLINDER
LOCKNUT
PIN
PINION
SERVICEMANS HAND TOOL
THREADED
TOOL SET
WRENCH
1-40
1-40
1-40
1-39
1-40
1-39
1-40
1-40
1-40
1-40
1-40
1-39
1-40
1-39
1-39 to 40
CHECK VALVE
FLEXIBLE
PICK-UP
REMOVER
1-3, 1-54
1-3, 1-54
1-3, 1-54
CHEMICAL cont.
CLEANING cont.
BLOCK
3-2
CALIBRATION FLUID
3-33
CAULKING
3-7 to 8
CLEANING
2-101, 3-10 to 11
COMPOUND
3-31
COOLANT CONDITIONER
3-13
CUTTING OIL
3-30
DEFOAMER
3-10
DETERGENT
3-11
DIESEL FUEL
3-33, 3-35
ENGINE REPAIR
3-2 to 3
ENGINE TOOL
3-1, 3-3
ETHER CYLINDER
3-34
FORM-IN-PLACE GASKET
3-6
FUEL
3-33, 3-35
FUEL INJECTOR
3-33
GASKET
3-6
HIGH TEMP
3-4
HOSE
3-25, 3-35
HYDROSOLV CLEANER
3-10
INJECTION
3-33
INJECTOR
3-33
LAPPING
3-31
LAPPING COMPOUND
3-31
LOCTITE
3-1, 3-3
LUBRICANT
3-7 to 9, 3-21, 3-30 to 31
MOLY
3-27
MOLY KOTE
3-27
MOLYBDENUM DISULFIDE
3-27
PAINT
3-8
PASTE
3-37
PERSONAL USE
2-88, 2-102 to 103
PNEUMATIC
3-25, 3-35
PNEUMATIC TOOL
3-25, 3-35
PRESSURE WASHER
3-10 to 11
PRIMER
3-8
PROTECTION
2-88, 2-102 to 103
RETAINING COMPOUND
3-1, 3-3 to 4
SEAL
3-9
SEALANT
3-6
SOAP
3-11
TAPE
3-2
TEST KIT
3-13
THREAD LOCKING
3-1, 3-3 to 4
WICKING SEALANT
3-4
CONCENTRATE
3-10
COOLING SYSTEM
3-13
DEFOAMER
3-10
DEGREASER
3-10 to 11, 3-25 to 26
DETERGENT
3-8 to 11, 3-25
DISC
2-9
DISPENSER
2-106 to 107
ELECTRICAL
3-25
EXTENSION
1-74
FILTER KIT
3-9
GLASS
3-9
GRINDING
2-19
GRIT HAND CLEANER
3-35
GUN
1-73 to 74
HAND CLEANER
3-35 to 36
HIGH FLASH
3-25
HOLDER
2-9
HYDROSOLV CLEANER
3-10
IDLER
2-9
LINK
2-9
LUBRICANT
3-26
MAINTENANCE AIDS
2-106 to 107,
3-25 to 26
MANDREL
2-9
MARINE ENGINE
3-9
MINERAL SPIRIT
3-25
OIL
3-9, 3-26
ORANGE HAND CLEANER
3-35
PAPER PRODUCT
2-107
PAPER TOWEL
2-107
PENETRATE OIL
3-26
PERSONAL USE
3-11, 3-36 to 37
PLASTIC
3-9
PLASTIC COVER
3-9
PNEUMATIC
1-73 to 74
PNEUMATIC TOOL
1-73 to 74
PRESSURE WASHER
3-10 to 11
PROTECTIVE
3-9, 3-26
PUMICE HAND CLEANER
3-35
RUST PROTECTION
3-8, 3-25
SAFETY
2-106 to 108
SEAL KIT
3-9
SOAP
3-9 to 11, 3-25, 3-37
SOLVENT
3-25 to 26
SPRAYER
3-26
SURFACE RECONDITIONING
2-9, 2-19
UNDERCARRIAGE
2-9
VACUUM
1-74
WASHER
3-25
WATERLESS HAND CLEANER
3-35
WHEEL
2-19
WINDOW
3-8
WIPES
2-104 to 105, 2-107
CHISEL
DIFFERENTIAL
1-53
HAND TOOL
1-2 to 3, 1-48, 1-53
PIN REMOVER
1-48
PNEUMATIC TOOL
1-72
SERVICEMANS HAND TOOL 1-2 to 3, 1-53
TIP
1-48
TOOL SET
1-2 to 3, 1-53
WELDING
1-72
CIRCUIT
ELECTRICAL
GROUND FAULT
INTERRUPTER
SUPPLY
1-76
1-76
1-76
1-76
CLAMP
ADDITIVE
3-35
ADHESIVE
3-7 to 8, 3-21, 3-31
ADHESIVE & SEALANT
3-1, 3-3 to 4
ALKALINE
3-10
ANAEROBIC
3-1, 3-3 to 4
ANTI-FREEZE
3-35
ANTI-GALLING
3-27
ANTI-SEIZE
3-27
BEARING MOUNT
3-1, 3-3
ABRASIVE
ABSORBENT
AEROSOL
AIR POWERED
ALKALINE
ALUMINUM SAFE
BATTERY
CABINET WASHER
CHARGING HOSE
CHEMICAL
ASSEMBLY
CIRCULAR CUT-OFF SAW
FAN
FAN DRIVE
SILICONE
2-61 to 62
2-61 to 62
2-129
2-61 to 62
2-58
2-129
2-129
2-129
2-129
2-129
2-19
2-104 to 107
3-26
1-73 to 74
3-8, 3-10, 3-25
3-10
3-26
3-10
3-10
2-101, 3-10 to 11
3-28
3-28
3-28
3-28
3-28
COAT
PERSONAL USE
BATTERY
BATTERY STARTING SYS
BOLT
BOOSTER CABLE BATTERY
C-TYPE
CYLINDER
ENGINE
ENGINE TOOL
HOSE
HYDRAULIC CYLINDER
CLEANING
CHEMICAL
CLUTCH
2-111
COIL
ADJUSTMENT
STRAP
2-122
2-122
COLLET
BOLT EXTRACTOR
BOLT REMOVER
EXTRACTOR
HOUSING
MINI CUTTING TORCH
STUD REMOVER
WASHER
2-46
2-46
2-46
2-46 to 47
2-48
2-46 to 47
2-46
COMPOUND
ADHESIVE
AEROSOL
ASSEMBLY
CHEMICAL
DISPENSER KIT
HEAT SINK
HEAT SINK COMPOUND
3-31
3-40
3-31
3-31
3-31
3-27
3-27
nomen.qxd
9/15/06
2:17 PM
Page 4
Nomenclature Index
COMPOUND cont.
HEAT TRANSFER
LAPPING
LAPPING COMPOUND
LUBRICANT
O-RING
PAINT REMOVER
REPAIR KIT
RUBBER
SEALANT
SEMI-CONDUCTOR
SILICONE
COVER cont.
3-27
3-31
3-31
3-31
3-31
3-40
3-1, 3-3
3-31
3-1, 3-3
3-27
3-27
COMPRESSOR
AIR CONDITIONING
AIR TOOL OIL
BLOCK
CASE
GROUP
PUMP OIL
REFRIGERANT
VACUUM PUMP
3-29
3-29
1-85
1-85
1-85
3-29
3-29
3-29
CONNECTOR
BOX
CASE
ELECTRICAL
PLUG
SHRINK TUBING
STORAGE
SUPPLY
SURE SEAL
1-86
1-86
2-75, 2-77
2-75
2-77
1-86
2-75
1-86
2-115
2-115
2-115
2-115
2-115
2-115
2-115
2-115
2-115
2-115
2-115
2-115
1-84
1-84
COUPLER
COUPLING
GREASE GUN
LUBE EQUIPMENT
LUBRICATION
NIPPLE
NOZZLE ASSEMBLY
REPAIR PART
TORQUE
WRENCH
ZERK ADAPTER
1-56
1-56
1-56
1-56
1-56
1-56
1-56
1-61
1-61
1-56
COUPLING
ASSEMBLY
COUPLER
DIFFERENTIAL
GAUGE GROUP
GREASE GUN
HOSE ASSEMBLY TOOL
HYDROSTAT
LUBE EQUIPMENT
LUBRICATION
NIPPLE
NOZZLE ASSEMBLY
ORIFICE
PIPE
PLUG
PRESSURE
REPAIR PART
REWORK
TAP
TAPER
TESTING
ZERK ADAPTER
1-8
1-56
1-8
1-8
1-56
1-56
1-8
1-56
1-56
1-56
1-56
2-35
2-35
2-35
1-8
1-56
2-35
2-35
2-35
1-8
1-56
COVER
BARREL
1-83
1-80
2-115
2-115
2-50
1-83
1-83
1-83
1-80
2-50
2-50
1-80
1-83
2-50
1-83
COVER-ALLS
TYVEK COVERALLS
2-91
CRACK REPAIR
SALVAGE
1-78
CRANKSHAFT
CONTAINER
BARREL
COVER
DRUM COVER
DRUM CRADLE
DRUM FILTER
DRUM HANDLER
DRUM TILTER
FLAMMABLE
FUNNEL
SAFETY CAN
SOLVENT CAN
STORAGE CAN
TOOL BOX
WATER RESISTANT
BOX
CABINET
CONTAINER
DRUM COVER
HYDRAULIC
PLEXIGLASS
POWER TRAIN
REPAIR BOX
STORAGE
TEST GROUP
TESTING
TOOL BOX
TRANSMISSION
VEHICLE SYSTEM TOOLS
WAREHOUSE EQUIPMENT
ABRASIVE
BELT
BRACKET
DAMPER
ENGINE TOOL
GEAR
GUIDE
HOIST
HYDRAULIC
LINK
POLISHING
PULLER
REPAIR GROUP
SANDING
SURFACE RECONDITIONING
TUBE
VIBRATION
2-24
2-24
1-88
3-28
1-88, 3-28
2-40
2-40
1-88
2-40
1-88
2-24
2-40
3-28
2-24
2-24
3-28
3-28
CUP
HAND TOOL
PAPER PRODUCT
PICK
SEAL
SEAL PICK
SERVICEMANS HAND TOOL
1-54
2-108
1-54
1-54
1-54
1-54
CUTTER BIT
PNEUMATIC TOOL
1-72
CUTTING
ABRASIVE
CUTTING TORCH
HAND TOOL
HOLDER
IGNITOR
LIFT CYLINDER
MAST
METAL
MINI CUTTING TORCH
PIPE CUTTER
PNEUMATIC
PNEUMATIC TOOL
POLISHING
RECONDITIONING
ROD
SERVICEMANS HAND TOOL
SHIELD
SPACER
STRIKER PLATE
SURFACE RECONDITIONING
TUBING CUTTER
WHEEL
2-20
2-48
1-40, 1-51
2-9
2-48
2-9
2-9
2-9
2-48
1-51
1-72
1-72
2-22
2-9
2-48
1-51
2-48
1-40
2-48
2-9, 2-20,
2-22
1-51
1-51, 2-20
TAP OIL
THREADING OIL
DIE cont.
3-30
3-30
CYLINDER
DIE SET
ADAPTER
1-22 to 23
BOLT
2-128 to 129
BRAKE
1-33
BRUSH
2-4
CHAIN
1-40
CHAIN WRENCH
1-40
CLAMP
2-129
DIFFERENTIAL
1-40
HANDLE
1-40
HITCH
1-33
HYDRAULIC
1-22 to 23, 1-40, 2-128
HYDRAULIC CYLINDER
2-129
LOCKNUT
1-40
MULTIPLIER
1-22 to 23
PIN
1-40
PINION
1-40
REPAIR
1-22 to 23
REPAIR PART
2-128
SOCKET
1-33
STAND
1-22 to 23
SURFACE RECONDITIONING
2-4
THREADED
1-40
TORQUE
1-22 to 23
CASE
D
DAMPER
CRANKSHAFT
ENGINE TOOL
REPAIR GROUP
TUBE
VIBRATION
3-28
3-28
3-28
3-28
3-28
2-115
3-30
3-30
3-30
3-30
3-30
3-30
DISPENSER
CLEANING
MAINTENANCE AIDS
PACKAGING
PAPER PRODUCT
PAPER TOWEL
STRETCH FILM
TAPE
WIPES
WYPALLS
LINKAGE
LOADER
METRIC
PIPE
STANDARD
THREAD
2-33
2-33
2-33 to 34
2-33
2-33 to 34
2-33
2-33
ABRASIVE
2-6, 2-10, 2-12 to 14
ACCESSORY
1-73
ADAPTER
2-16 to 17
AIR
1-73
CLEANING
2-9
ENGINE TOOL
2-8, 2-10 to 11, 2-13
FIBER
2-12 to 13
GRINDING
1-73, 2-11, 2-13, 2-16 to 17
HAND OPERATED
1-73
HOLDER
2-7 to 10, 2-16 to 17
HOOK AND LOOP
2-15
HOSE
1-73
IDLER
2-9
LIFT CYLINDER
2-9
LINK
2-9
MANDREL
2-8 to 11, 2-16 to 17, 2-22
MAST
2-9
METAL
2-9
P.S.A.
2-14 to 15
PAD
2-7 to 8, 2-10 to 11, 2-13
POLISHING
2-13, 2-24
POLISHING STAR
2-13, 2-24
RECONDITIONING
2-9
SANDING
2-15
SHAFT
2-8, 2-10 to 11
SURFACE RECONDITIONING
1-73,
2-6 to 17, 2-22, 2-24
THREADED
2-8, 2-10 to 11
UNDERCARRIAGE
2-9
WHEEL
2-16 to 17
DIE
2-34
2-33
DISC
DIAGNOSTIC
CUTTING OIL
CHEMICAL
LUBRICANT
MACHINING OIL
MAINTENANCE AIDS
OIL
PIPE THREADING OIL
THREAD RESTORATION
THREADED
2-106 to 107
2-106 to 107
2-120
2-106 to 107
2-106 to 107
2-120
2-119
2-106 to 107
2-106 to 107
DISPLAY
AIR
HAND TOOL
HOSE
SERVICEMANS HAND TOOL
SHOP
TOOL SET
1-73
1-43
1-73
1-43
1-73
1-43
DIVIDER
CASE
DIVIDER KIT
STORAGE
1-85
1-85
1-85
DRILL
ACCESSORY
2-21, 2-30
AIR
1-71
AIR REGULATED
2-30
AIRCRAFT DRILL
2-30
BIT 2-28 to 30, 2-38 to 39, 2-41 to 42, 2-46
CHARGER
1-75 to 76
CHUCK
1-71
COBALT DRILL
2-29
CORDLESS
1-75 to 76
DRILL SET
2-29
DRILL SHARPENING
2-21
ELECTRIC
1-75 to 76
ENGINE TOOL
2-28
EXTENSION
2-30
EXTRA HEAVY DUTY
1-76, 2-29
GRINDING
2-21, 2-25
GUIDE
2-40
HAND OPERATED
1-46
HAND TOOL
1-46
IMPACT
1-75 to 76
METRIC
2-30, 2-41 to 42
MOBILE
1-76
nomen.qxd
9/15/06
2:17 PM
Page 5
Nomenclature Index
DRILL cont.
ELECTRONIC cont.
PNEUMATIC
REDUCED SHANK
FORM-IN-PLACE GASKET
GASKET MATERIAL
MOUNTING BRACKET
R.T.V.
SILICONE
TESTER
TORQUE
WRENCH
1-71
2-28, 2-30,
2-38 to 39, 2-41 to 42
STANDARD
2-28 to 29, 2-38 to 39
SURFACE RECONDITIONING 2-21, 2-25
THREAD REPAIR
2-38
THREADED
2-38
VALVE SEAT
2-25
VARIABLE SPEED DRILL
1-75
WHEEL
2-21, 2-25
DUST CAP
DRUM COVER
PROTECTIVE
2-108
2-108
1-75
1-75
ELECTRICAL
2-124, 2-129
1-76
3-25
2-75, 2-77
2-118
2-74
2-124, 2-129
1-76
2-77
2-76 to 77
1-65
2-77
1-76
3-25
2-75
1-65
2-76 to 77
1-76, 2-75
2-76, 2-118
2-76
2-124, 2-129
1-65
ELECTRICAL PRODUCT
2-110
2-68 to 69
2-110
2-110
2-69
2-72 to 73
2-72 to 73
1-3, 2-67 to 69
2-67
2-68 to 69
2-110
1-3, 2-67 to 69
2-69
2-110
1-3, 2-67 to 69
1-3, 2-67 to 69
1-3, 2-67
2-110
ELECTRONIC
ADHESIVE & SEALANT
CAULKING
ELEMENT
ATOMIC ABSORPTION
CONOSTAN OIL STANDARD
METAL
OIL
S.O.S.
STANDARD
ABSORBENT
ADAPTER
BATTERY
BULB
CARRYING CASE
DIAGNOSTIC
ELECTRIC LIGHT
ELECTRIC POWERED
FLASHLIGHT
HOLSTER
INSPECTION LIGHT
LAMP
LIGHT
MEASURING
MICROFILM VIEW
PERSONAL USE
SAFETY
TORCH
TRANSFORMER
3-7
3-7
1-61
3-7
3-7
1-61
1-61
1-61
3-33
3-33
3-33
3-33
3-33
3-33
ELECTRIC
CABLE
CIRCUIT
CLEANING
CONNECTOR
ELECTRICAL TAPE
EXTENSION CORD
FASTENER
GROUND FAULT
HEAT GUN
HEAT SHRINK
HYDRAULIC
INSULATOR
INTERRUPTER
MAINTENANCE AIDS
PLUG
PUMP
SHRINK TUBING
SUPPLY
TAPE
TAPE DISPENSER
TIE
WRENCH
FILTER cont.
3-7
3-7
2-102 to 103
ENGINE
ANTI-SEIZE
3-27
BIT
1-15
BOLT
1-61, 2-129
CLAMP
2-129
COLD WEATHER STARTING
3-15
ENGINE TOOL
1-15, 1-23, 2-40,
2-50, 2-110, 2-129
EYE LOUPE
2-110
FLOW METER
2-129
GRAPHITE GREASE
3-27
HAND TOOL
1-23
HELI-COIL
2-40
HIGH LOAD GREASE
3-27
HIGH TORQUE
3-27
INSERT
2-40
LOCKWASHER
2-129
LOUPE
2-110
LUBRICANT
3-14 to 15
MAGNIFYING GLASS
2-110
METAL CUTTING THREAD INSERT 2-40
OIL
3-14 to 15
PERSONAL USE
2-110
PIN
2-129
PLUG
2-50
RATCHET
1-23
SAFETY
2-110
SERVICEMANS HAND TOOL
1-23
SLEEVE ASSEMBLY
2-40
THREAD LUBRICANT
3-27
TILT FRAME
1-61
TOOL SET
1-23
UNDERCARRIAGE
2-129
VEHICLE SYSTEM TOOLS
2-129
WINDER
2-40
EPOXY
ADHESIVE
ADHESIVE & SEALANT
BONDING
COOLING SYSTEM
FUEL TANK REPAIR KIT
KIT
MIXER CUP
NYLON
PAINT
PAINT PRODUCTS
PRIMER
RADIATOR
REPAIR
REPAIR KIT
SEALANT
SOLVENT
THINNER
URETHANE
3-34
3-5
3-5, 3-34
3-34
3-34
3-34
3-5
3-34
3-40
3-40
3-40
3-34
3-34
3-34
3-34
3-40
3-40
3-40
ETHER CYLINDER
CHEMICAL
COLD WEATHER STARTING
STARTING
STARTING AIDS
STARTING ETHER
3-34
3-34
3-34
3-34
3-34
EXHAUST
EXHAUST MANIFOLD
HI-TEMP SEALANT
MANIFOLD
SEALANT
3-34
3-34
3-34
3-34
SAFETY
2-81 to 82
SPRING
1-40
STRAP WRENCH
1-40
ULTRA-VIOLET LEAK DETECTION
3-24
WRENCH
1-40
EXTENSION
FIRST AID
ACCESSORY
2-30
BOX WRENCH
1-2 to 3, 1-51, 1-59
CAMSHAFT
1-59
CLEANING
1-74
DRILL
2-30
DUAL WHEEL
1-8, 1-21, 1-62
ENGINE STARTING
1-22
ENGINE TOOL
1-1 to 2, 1-10, 1-21
GUN
1-74
HAND TOOL 1-1 to 2, 1-10, 1-15, 1-21 to 23
POWER TRAIN TOOL
1-8, 1-21, 1-62
SERVICEMANS HAND TOOL
1-21
SOCKET
1-1 to 2, 1-10, 1-21
SOCKET EXTENSION
1-15, 1-21 to 23
STARTER
1-22
STARTING SYSTEM
1-22
TOOL
1-21
TOOL SET
1-21
TORQUE
1-2 to 3, 1-8, 1-21, 1-51,
1-59, 1-62
UNIVERSAL
1-22
VACUUM
1-74
WHEEL & TIRE
1-8, 1-21, 1-62
WRENCH
1-2 to 3, 1-8, 1-21, 1-51,
1-59, 1-62
BLANKET
FIRST AID BLANKET
KIT
PERSONAL USE
SAFETY
WELDING PROTECTION
EXTRACTOR
BOLT EXTRACTOR
2-46
BOLT REMOVER
2-46 to 47
COLLET
2-46
HOUSING
2-46
KIT
2-46
METAL CUTTING THREAD INSERT 2-46
PLASTIC CASE
2-46
STUD REMOVER
2-46 to 47
WASHER
2-46
F
FAN
CLUTCH
FAN DRIVE
3-28
3-28
FASTENER
ADHESIVE & SEALANT
ANAEROBIC
BEARING MOUNT
CABLE
ELECTRICAL
LIP SEAL
LOCTITE
REPAIR PART
SEAL
THREAD LOCKING
TIE
3-1, 3-3
3-1, 3-3
3-1, 3-3
2-124, 2-129
2-124, 2-129
3-1, 3-3
3-1, 3-3
2-43
2-123
3-1, 3-3
2-124, 2-129
FILTER
BLACK LIGHT LEAK DETECTION
3-24
CUTTING TOOL
1-40
CUTTING WHEEL
1-40
DIAGNOSTIC
3-24
ELECTRIC
3-24
FLUORESCENT
3-24
FUEL SYSTEM TOOL
1-40
HAND TOOL
1-40
LIGHT
3-24
LUBE SYSTEM TOOL
1-40
LUBRICANT
1-8, 1-40
MAINTENANCE TOOL
1-40
PERSONAL USE
2-81
PIN
1-40
REPLACEMENT
2-81
RESPIRATOR
2-81 to 82
RETAINING
1-40
RINGS
1-40
ROLLER
1-40
S.O.S.
1-8, 1-40
2-79
2-79
2-78
2-79
2-79
2-79
FITTING
HYDRAULIC
TEE
TESTING
2-49
2-49
2-49
FIXTURE
REPAIR
TRACK LINK
WELDING
2-58
2-128
2-128
FLASHLIGHT
BATTERY
BULB
CLAMP KIT
CONTINUITY TESTER
DIAGNOSTIC
ELECTRICAL PRODUCT
HOLSTER
INSPECTION
INSPECTION LIGHT
LAMP
LIGHT
LIGHTING
MEASURING
PERSONAL USE
SAFETY
TESTER
TORCH
2-67 to 69
2-67 to 68
2-67
2-68
2-69
1-3, 2-67 to 69
2-67
2-68
2-68 to 69
2-67 to 68
1-3, 2-67 to 69
2-67 to 68
2-69
1-3, 2-67 to 69
1-3, 2-67 to 69
2-68
1-3, 2-67 to 68
FLOOR MAT
ABRASIVE COATED MAT
ACCESSORY
ANTI-FATIGUE MAT
FLOOR PAD
INTERLOCKING MAT
PERSONAL USE
SAFETY
SHOP
2-109
2-110
2-108 to 109
2-108 to 109
2-109
2-108 to 109
2-108 to 109
2-110
FLUID
AUTO BRAKE FLUID
3-33
AUTOMATIC
3-32
BRAKE
3-33
FAN DRIVE
3-28
HI TEMP BRAKE FLUID
3-33
HIGH TEMP
3-31
LUBRICANT
3-28, 3-31
MAINTENANCE AIDS
3-33
MOISTURE RESIS BRAKE FLUID
3-33
OIL
3-31
SHOP FLUID
3-33
SILICONE
3-28
TRANSMISSION
3-32
VISCOUS CLUTCH FLUID
3-28
WASHER
3-9
WINDSHIELD
3-9
FLUORESCENT LIGHT
BALLAST
BULB
CHOP SAW
CLAMP KIT
ELECTRIC LIGHT
FLUORESCENT
LAMP
LIGHT
PORTABLE LIGHT
TUBE
VAPOR CLAMP KIT
WORK LIGHT
2-72
2-71
2-72
2-71
2-71 to 72
2-71 to 72
2-71
2-71 to 72
2-71 to 72
2-71 to 72
2-71
2-71 to 72
nomen.qxd
9/15/06
2:17 PM
Page 6
Nomenclature Index
GAUGE GROUP cont.
FLYWHEEL
ADAPTER
ENGINE TOOL
REPAIR PART
RETAINING
SOCKET
1-39
1-1, 1-4, 1-14, 1-18
1-39
1-1, 1-4, 1-14, 1-18
1-1, 1-4, 1-14, 1-18
FOAM
BLOCK
BOX
CASE
HYDROSTAT
INSERT
LINER
PACKING
PADDING
POWER TRAIN TOOL
PROTECTOR
REPAIR PART
REPLACEMENT
STORAGE
WHEEL & TIRE
1-61, 1-85
1-85, 1-87
1-61, 1-85, 1-87
1-85
1-61, 1-85, 1-87
1-85
1-85
1-61, 1-85, 1-87
1-85
1-87
1-61, 1-85
1-87
1-61, 1-85, 1-87
1-85
FUSE
ELECTRIC
REPLACEMENT
2-129
2-129
G
3-6
3-7, 3-27
3-7
3-7
3-7
3-6
3-7
3-7, 3-27
3-7, 3-27
3-7
3-6
3-7, 3-27
3-6
3-7, 3-27
3-7, 3-27
GAUGE
CROWFOOT
1-12
DIFFERENTIAL
1-8
FEELER GAUGE
1-2 to 7, 1-9, 1-53
GAP GAUGE
1-2 to 7, 1-9, 1-53
GAUGE GROUP
1-8
GROMMET
1-61
HAND TOOL
1-4 to 8, 1-50
HEAT GUN
2-123
HYDRAULIC
2-49
HYDROSTAT
1-8
INDICATOR
1-12
MEASURING TOOL
1-4 to 8
PLUG
2-49
POWER TRAIN TOOL
1-4 to 8
PRESS
2-49
PRESSURE
1-8, 2-123
PRESSURE GAUGE
1-8
PROTECTION
1-61
SERVICEMANS HAND TOOL
1-4 to 8
SHRINK WRAP
2-123
SPARK PLUG GAP
1-2 to 7, 1-9, 1-53
TESTING
1-8
TIRE GAUGE
1-4 to 8
TORQUE
1-61
WHEEL & TIRE
1-4 to 8
WRENCH
1-12, 1-61
GEAR
2-40
2-40
2-40
3-19 to 20
3-19 to 20
2-40
GLASSES
EYE GUARD
EYE PROTECTION
PROTECTION
SAFETY
SAFETY GLASSES
GLOVES
BEAD BLAST EQUIPMENT
CHEMICAL RESISTNT GLOVE
2-96
2-95 to 96,
2-102 to 103
LEATHER
2-95, 2-102 to 103
MAINTENANCE AIDS
2-96
PERSONAL USE 2-93 to 96, 2-102 to 103
PROTECTION
2-92 to 96, 2-102 to 103
SAFETY
2-93 to 96, 2-102 to 103
ADJUSTABLE
LUBE
METER
OIL
SOCKET
1-8
2-128
1-8
1-8
1-8
1-8, 2-128
1-8
1-8, 2-128
2-128
PULLER
TAP
GUN
CRANKSHAFT
GUIDE
HYDRAULIC
LUBRICANT
OIL
PULLER
1-15
3-32
1-15
3-32
1-15
3-7
1-73 to 74, 3-7
2-124
3-7
1-73 to 74
1-74
1-74
1-4 to 9, 1-56
1-4 to 9, 1-56
1-4 to 9, 1-56
1-4 to 9, 1-56
1-73 to 74
1-73 to 74
2-124
1-74
H
HAMMER
BALL PEEN HAMMER
1-2 to 3, 1-6,
1-8 to 9, 1-46
HAND TOOL
1-2 to 3, 1-6, 1-8 to 9, 1-46
PNEUMATIC
1-71 to 72
PNEUMATIC TOOL
1-71 to 72
SERVICEMANS HAND TOOL
1-2 to 3,
1-6, 1-8 to 9, 1-46
SOFT FACE HAMMER
1-2 to 3, 1-46
TIP
1-3, 1-46
TOOL SET
1-2 to 3, 1-8, 1-46
GREASE
HAND TOOL
CARTRIDGE
3-21
CHASSIS GREASE
3-21
GENERAL PUR LITHIUM
3-21
GENERAL PURPOSE GREASE
3-21
HIGH LOAD GREASE
3-21
LITHIUM BASED GREASE
3-21
LUBE EQUIPMENT
3-21
LUBRICANT
3-21 to 22, 3-30
LUBRICANT SYSTEM
3-21
LUBRICATION
3-21
MOLY GREASE
3-21
MOLYBDENUM DISULFIDE
3-21
MOUNTING
3-30
MOUNTING KIT
3-30
MOUNTING TIRE
3-30
REBUILDING
3-28
SEALANT
3-28
SILICONE
3-28
TIRE
3-30
TURBO CHARGER
3-28
VACUUM
3-28
ACCESSORY
1-64
ADAPTABLE CABLE
1-22
ADAPTER
1-1 to 2, 1-5 to 6, 1-9, 1-12,
1-15, 1-22, 1-48, 1-54, 2-18
ADAPTER FITTING
1-22
ADJUSTMENT
1-9, 1-36
ALLEN WRENCH
1-3, 1-6, 1-8 to 9,
1-42 to 43
BALL PEEN HAMMER
1-2 to 3, 1-6,
1-8 to 9, 1-46
BAR
1-6, 1-9
BASE
1-85
BEARING
1-48
BIT
1-8 to 9, 1-15, 1-45
BLADE
1-3, 1-45, 1-54, 1-76
BLOCK
1-50
BOLT
1-39
BOLT EXTRACTOR
2-44 to 45
BOLT REMOVER
2-44 to 45
BOX
1-83, 2-47
BOX WRENCH
1-39, 1-59
BRAKE
1-36
BREAKER BAR
1-1, 1-7, 1-14,
1-20 to 21, 1-54
BRUSH
1-55 to 56
BUSHING
1-48
CABINET
1-82 to 83
CASE
1-48
CENTER PUNCH
1-2 to 3, 1-53
CHAIN
1-8
CHAIN WRENCH
1-39
CHISEL
1-2 to 3, 1-48, 1-53
COMBINATION WRENCH
1-1, 1-3, 1-6,
1-8 to 9, 1-23 to 24, 1-35, 1-39, 1-41
CROWFOOT
1-12
CUP
1-54
CUTTING
1-40, 1-51
CUTTING TOOL
1-40
CUTTING WHEEL
1-40
CYLINDER HEAD TOOL
1-2, 1-17
DIFFERENTIAL
1-43
DISPLAY
1-43
DRAWER LINER
1-83
DRESSING TOOL
1-19, 1-34
DRILL
1-46
DRIVE
1-19, 1-22 to 23
DRIVER
1-1 to 6, 1-8 to 10, 1-12,
1-14 to 15, 1-17, 1-20 to 22,
1-31, 1-47 to 48
GREASE GUN
BATTERY
COUPLER
COUPLING
GUN
HOSE ASSEMBLY TOOL
LEVER GUN
LUBE EQUIPMENT
LUBE GUN
LUBRICATION
NIPPLE
NOZZLE ASSEMBLY
REPAIR PART
ZERK ADAPTER
1-57
1-56
1-56
1-4 to 9, 1-56
1-56
1-4 to 9, 1-56
1-4 to 9, 1-56
1-4 to 9, 1-56
1-56 to 57
1-56
1-56
1-56
1-56
GUARD
HEAT GUN
SHRINK WRAP
GAUGE GROUP
ASSEMBLY
BOLT
COUPLING
DIFFERENTIAL
GAUGE
HYDROSTAT
MEASURING TOOL
PRESSURE
PUMP
2-128
1-8, 2-128
GOVERNOR
GASKET MATERIAL
ADHESIVE
ADHESIVE & SEALANT
BONDING
CAULKING
ELECTRONIC
FLEXIBLE
FLEXIBLE GASKET
FORM-IN-PLACE GASKET
HEAT SINK COMPOUND
HIGH TEMP
LIQUID GASKET
R.T.V.
SEALANT
SILICONE
THERMALLY CONDUCTING RTV
REPAIR PART
TESTING
GUIDE cont.
2-123
2-123
GUIDE
CRANKSHAFT
DRILL
GEAR
HELI-COIL
HYDRAULIC
INSERT
2-40
2-40
2-40
2-40
2-40
2-40
nomen.qxd
9/15/06
2:17 PM
Page 7
Nomenclature Index
HAND TOOL cont.
RAZOR KNIFE
1-54
REACTION
1-62
REMOVAL TOOL
2-47
REPAIR
1-14, 1-20 to 21, 1-66 to 68
REPAIR KIT
1-14 to 15, 1-20 to 21, 1-58
REPAIR PART
1-12, 1-20, 1-83
REPLACEMENT
1-22, 1-54
RETAINER
1-21, 1-71
RETAINING
1-52
RETAINING RING
1-52
RETAINING RING PLIERS
1-52
REVERSING
1-14, 1-20 to 21
RIVET
1-53
ROLLER
1-40
RULE
1-5 to 6, 1-51
RULER
1-5 to 6, 1-51
SABER
1-45, 1-76
SAW
1-3, 1-45, 1-76
SCRATCHER BRUSH
1-55 to 56
SCREW
2-44 to 45
SCREW EXTRACTOR
2-44 to 45
SCREWDRIVER
1-2 to 9, 1-44 to 45
SEAL
1-3, 1-54
SEAL PICK
1-54
SEPARATOR
1-48
SERVICE TOOL
1-5, 1-7 to 8
SERVICEMANS HAND TOOL
1-1 to 15,
1-17 to 25, 1-29, 1-31,
1-33 to 36, 1-38 to 39, 1-41,
1-43 to 46, 1-49 to 56, 1-76,
1-82 to 83, 2-44 to 45
SHAFT NUT
1-43
SNAP RING PLIERS
1-52
SOCKET 1-1 to 23, 1-26 to 34, 1-43 to 44,
1-54, 1-66 to 68, 1-80
SOCKET EXTENSION
1-3 to 4, 1-6, 1-9,
1-12, 1-15, 1-21 to 23, 1-34, 1-62
SOCKET WRENCH 1-16, 1-33, 1-43, 1-62
SPACER
1-40
SPANNER WRENCH
1-8, 1-41
SPARK PLUG GAP
1-53
SPARK PLUG SOCKET
1-44
SPECIALTY
1-43
SPRING
1-36
SQUARE DRIVE
1-19
STEERING
1-36
STORAGE
1-2, 1-8, 1-15, 1-82 to 83
STUD REMOVER
2-47
SUSPENSION
1-19, 1-39
TAPE MEASURE
1-3, 1-49 to 50
TELESCOPING MAGNET
1-54
THREAD
1-39
TILT CYLINDER
1-52
TIP
1-3, 1-46, 1-48
TIRE
1-48
TIRE GAUGE
1-4 to 8
TOOL
1-1, 1-5, 1-7, 1-22, 1-26, 1-32,
1-49, 1-54
TOOL BAG
1-48
TOOL BOX
1-2, 1-6, 1-8 to 9, 1-15,
1-82 to 83
TOOL CHEST 1-2, 1-8 to 9, 1-15, 1-82 to 83
TOOL GROUP
1-5 to 7, 2-18
TOOL SET 1-1 to 15, 1-17 to 25, 1-29, 1-31,
1-33 to 36, 1-38 to 39, 1-41,
1-43 to 44, 1-46, 1-52 to 54,
1-83, 2-44 to 45
TOOL STORAGE
1-4 to 5
TORQUE
1-59
TORX
1-3, 1-9, 1-16, 1-43
TRANSMISSION
1-17, 1-53
TUBING CUTTER
1-51
U-JOINT
1-23
UNIVERSAL JOINT
1-2, 1-9, 1-17,
1-22, 1-34
UTILITY KNIFE
1-54
VEHICLE SYSTEM TOOLS
1-22
WAREHOUSE EQUIPMENT
1-2, 1-8,
1-15, 1-82 to 83
WHEEL & TIRE
1-4 to 8
WORK LIGHT
2-71
WRENCH 1-1, 1-3 to 15, 1-17 to 25, 1-27,
1-29 to 30, 1-32 to 36, 1-38 to 39,
1-41 to 44, 1-50 to 51, 1-54, 1-59,
1-64, 1-66 to 68, 1-80
HANDLE
BROOM
2-126
CHAIN
1-40
CHAIN WRENCH
1-40
CYLINDER
1-40
FILE
2-27
FUEL SYSTEM TOOL
1-2, 1-9, 1-17
GLASS
1-54
GOVERNOR TOOL
1-2, 1-9, 1-17
HAND TOOL
1-1 to 2, 1-4 to 5, 1-7, 1-10,
1-15, 1-21 to 22, 1-38 to 39, 1-54
HYDRAULIC
1-40
JANITORIAL EQUIPMENT
2-126
MOP
2-126
RATCHET
1-38
RETAINER
1-21
SERVICEMANS HAND TOOL
1-1 to 2,
1-10, 1-15, 1-21 to 22, 1-38
SOCKET
1-1 to 2, 1-4 to 5, 1-7,
1-9 to 10, 1-17, 1-22, 1-54
TOOL SET
1-1 to 2, 1-10, 1-15,
1-21 to 22, 1-38
TORQUE CONTROL TOOL
1-2, 1-9, 1-17
WINDOW
1-54
WINDOW INSTALLATION
1-54
WINDSHIELD
1-54
WRENCH
1-15, 1-21 to 22, 1-38
HARD HAT
ATTACHMENT
BRACKET
HEAD GEAR
HEAD PROTECTION
PERSONAL USE
PROTECTION
SAFETY
2-90
2-90
2-89
2-89
2-89
2-89
2-89
1-74
1-74
HOSE
ACCESSORY
AIR
ANTI-FREEZE
CAP
CHEMICAL
CLAMP
DISC
DISPLAY
GRINDING
HAND OPERATED
PLUG
PNEUMATIC
PNEUMATIC TOOL
PROTECTION
SAFETY GOGGLES
SHOP
STORAGE
SURFACE RECONDITIONING
TORQUE
WRENCH
1-73
1-73
3-35
2-52 to 55
3-25, 3-35
2-129
1-73
1-73
1-73
1-73
2-52 to 55
3-25, 3-35
3-25, 3-35
2-52 to 55
2-54
1-73
2-52 to 55
1-73
1-61
1-61
HOSE ASSEMBLY
HAND TOOL
HYDRAULIC
POWER TRAIN
TEST GROUP
TRANSMISSION
1-8
1-8
1-8
1-8
1-8
HYDRAULIC
ACCESSORY
ADAPTER
ADDITIVE
ASSEMBLY
BOLT
CHAIN
CHAIN WRENCH
COTTER PIN
COVER
CRANKSHAFT
CYLINDER
DIFFERENTIAL
DRIVE
IDLER cont.
ELECTRICAL
1-65
FITTING
2-49
GAUGE
2-49
GEAR
2-40
GUIDE
2-40
HAND TOOL
1-64 to 65
HANDLE
1-40
HOSE ASSEMBLY
1-8
LOCKNUT
1-40
LOCKWASHER
2-129
LUBRICANT
3-19
LUBRICATION
2-129
METER
2-49
MULTIPLIER
1-22 to 23
OIL
3-19 to 20, 3-32
PIN
1-40
PINION
1-40
PLUG
2-49
POWER TRAIN
1-8
PRESS
2-49
PULLER
2-40
PUMP
1-16, 1-65, 2-49, 2-129
REPAIR
1-22 to 23
REPAIR KIT
1-63 to 64
REPAIR PART
2-49, 2-128 to 129
SEAL
2-49
SEAL KIT
1-63
SOCKET
1-16
STAND
1-22 to 23
TEE
2-49
TEST GROUP
1-8, 2-50, 2-129
TESTING
2-49 to 50, 2-128 to 129
THREADED
1-40
TORQUE
1-22 to 23, 1-63 to 65
TRANSMISSION
1-8
WRENCH
1-63 to 65
SCRAPER
1-2 to 3, 1-54
SERVICE KIT
1-2 to 3, 1-54
SURFACE RECONDITIONING
2-9
TRACK
1-2 to 3, 1-54
UNDERCARRIAGE
1-2 to 3, 1-54, 2-9
HYDRAULIC CYLINDER
HAZARDOUS AND
FLAMMABLE STORAGE
BLOW GUN
SAFETY AIR GUN
HYDRAULIC cont.
1-64
1-22 to 23
3-20, 3-32
1-16
2-128 to 129
1-40
1-40
2-129
2-50
2-40
1-22 to 23, 1-40, 2-128
1-40
1-16
ADDITIVE
BOLT
CHAIN WRENCH
CLAMP
CYLINDER
LUBRICANT
OIL
SEAL
WRENCH
3-32
2-129
1-40
2-129
2-129
3-32
3-32
3-32
1-40
HYDRAULIC WRENCH
ACCESSORY
REACTION ARM
SEAL KIT
SQUARE DRIVE
1-63
1-63
1-64
1-64
HYDROSTAT
ASSEMBLY
BLOCK
BOLT
COUPLING
DIFFERENTIAL
FOAM
GAUGE
GAUGE GROUP
HEX KEY WRENCH
MEASURING TOOL
POWER TRAIN TOOL
PRESSURE
PUMP
REPAIR PART
STORAGE
TESTING
WHEEL & TIRE
WRENCH
1-8
1-85
2-128
1-8
1-8
1-85
1-8
1-8, 2-128
1-41
1-8
1-85
1-8, 2-128
1-41, 2-128
1-85, 2-128
1-85
1-8, 2-128
1-85
1-41
I
IDLER
CLEANING
DISC
HOLDER
LINK
MANDREL
ROLLER
RULE
2-9
2-9
2-9
2-9
2-9
1-2 to 3, 1-54
1-3
INDICATOR
BRACKET
CROWFOOT
GAUGE
WRENCH
2-129
1-12
1-12
1-12
INJECTION PUMP
SOCKET
WRENCH
1-15
1-15
INJECTOR SLEEVE
INK
LAYOUT BLUE
LAYOUT INK
TOOLMAKERS INK
3-23
3-23
3-23
3-23
INSERT
ACCESSORY
BENCH
BLOCK
BOX
CASE
COARSE
ENGINE
ENGINE TOOL
FOAM
GUIDE
HELI-COIL
INSERT GROUP
INSERT KIT
INSTALLATION TOOL
INSTALLER
JAW INSERT
KIT
LINER
MASTER
METAL CUTTING
THREAD INSERT
METRIC
PACKING
PADDING
PILOT
PIPE VISE
PROTECTOR
REPAIR KIT
REPAIR PART
REPLACEMENT
REPLACEMENT KIT
SLEEVE
SLEEVE ASSEMBLY
SPARK PLUG
STANDARD
STORAGE
TAP
THREAD
THREAD REPAIR
THREADED
VISE
WINDER
2-56
1-85
1-61, 1-85
1-85
1-61, 1-85, 1-87
2-37 to 40
2-40
2-40
1-61, 1-85, 1-87
2-40
2-37 to 40, 2-42
2-40
2-42
2-37 to 40, 2-43
2-37 to 40
2-56
2-41 to 42
1-85
2-41 to 42
2-40 to 42
2-38 to 40, 2-43
1-85
1-61, 1-85, 1-87
2-40
2-56
1-87
2-38, 2-42
1-61, 1-85
1-87, 2-42
2-42
2-40
2-40
2-39 to 40
2-38, 2-40
1-61, 1-85, 1-87
2-37 to 40
2-43
2-38
2-43
2-56
2-40
INSTALLATION TOOL
BOLT
2-129
HAND TOOL
1-44
HELI-COIL
2-37 to 40
INSERT
2-37 to 40, 2-43
INSTALLER
2-37 to 40, 2-43
MASTER
2-129
METRIC
2-39
PARTS CLEANER
1-77
PIN
2-129
REMOVAL TOOL
2-129
RIVET
1-53
SERVICEMANS HAND TOOL
1-44
SOCKET
1-44
SPARK PLUG SOCKET
1-44
THREAD
2-43
TOOL
2-43
TOOL SET
1-44
TRACK
2-129
nomen.qxd
9/15/06
2:17 PM
Page 8
Nomenclature Index
INSTALLATION TOOL cont.
LAMP cont.
UNDERCARRIAGE
WRENCH
PORTABLE LIGHT
TRANSFORMER
2-129
1-44
INSTALLER
HELI-COIL
INSERT
INSTALLATION TOOL
METRIC
STUD
2-71
2-110
LAPPING
2-37 to 40
2-37 to 40
2-37 to 40, 2-43
2-39
2-47
1-49
LIFTING
2-126
2-126
2-126
2-126
2-126
2-127
2-127
2-126
K
KIT
CONDITIONER
3-2, 3-13
COOLANT
3-13
COOLING SYSTEM
3-13
CORDLESS
1-75 to 76
EPOXY
3-34
EXTRACTOR
2-46
FIRST AID
2-78
FUEL TANK REPAIR KIT
3-34
HAND TOOL
1-20
HELI-COIL
2-39, 2-42
IMPACT
1-75 to 76
INSERT
2-41 to 42
INSERT KIT
2-39
JAW INSERT
2-56
MASTER
2-41 to 42
METAL CUTTING THREAD INSERT 2-46
PLASTIC CASE
2-46
RADIATOR
3-13
RATCHET
1-15, 1-20 to 21
REMOVAL
1-10, 1-27
REPAIR KIT
1-15, 1-20 to 21,
2-42, 3-34
REPAIR PART
1-15, 1-20 to 21
REPLACEMENT
2-42
REPLACEMENT KIT
2-42
SEALANT
3-34
SHOP
2-56
SOCKET
1-10, 1-27
TEST KIT
3-13
TEST STRIP
3-13
VISE
2-56
WRENCH
1-10, 1-15, 1-20 to 21, 1-27
KNIFE
BLADE
HAND TOOL
RAZOR KNIFE
REPLACEMENT
SERVICEMANS HAND TOOL
UTILITY KNIFE
WINDOW
3-31
3-31
3-31
3-31
3-31
UNIVERSAL
JANITORIAL EQUIPMENT
BROOM
BUCKET
HANDLE
LINER
MOP
PLASTIC
WASTE DISPOSAL
WASTE RECEPTACLE
ADHESIVE
CHEMICAL
COMPOUND
LAPPING COMPOUND
LUBRICANT
LEVEL
1-54
1-54
1-54
1-54
1-54
1-54
3-8
ACCESSORY
ASSEMBLY
BRACKET
CHAIN
FUEL SYSTEM TOOL
FUEL TANK TOOL
HAND TOOL
HOIST
LINK
PLATE
PROTECTIVE
SHACKLE
SLEEVE
SLING
TRANSMISSION
BATTERY
FLASHLIGHT
PERSONAL USE
BOX
BRACKET
CASE
FOAM
HOIST
INSERT
JANITORIAL EQUIPMENT
LINK
PACKING
PADDING
REPAIR PART
STORAGE
WASTE RECEPTACLE
BRACKET
CLEANING
CRANKSHAFT
DISC
ENGINE TOOL
FUEL SYSTEM TOOL
FUEL TANK TOOL
HOIST
HOLDER
IDLER
LIFTING
LINER
SURFACE RECONDITIONING
UNDERCARRIAGE
1-88
2-9
1-88
2-9
1-88
1-88
1-88
1-88
2-9
2-9
1-88
1-88
2-9
2-9
LIQUID GASKET
LOCK
BATTERY
2-67 to 68
BULB
2-67 to 68, 2-71 to 72, 2-110
ELECTRIC LIGHT
2-71 to 72
ELECTRICAL PRODUCT
2-110
FLASHLIGHT
2-67 to 68
FLUORESCENT LIGHT
2-71
LIGHT
2-71
MICROFILM VIEW
2-110
1-85
1-88
1-85
1-85
1-88
1-85
2-126
1-88
1-85
1-85
1-85
1-85
2-126
LINK
LADDER
LAMP
2-70
2-67 to 68
2-67 to 68
LINER
L
2-127
2-127
1-8, 1-89
1-88
1-88
1-8
1-88
1-88
1-8
1-88
1-88
1-89
1-89
1-8, 1-89
1-89
1-8, 1-88 to 90
1-88
LIGHTING
ADHESIVE
FLEXIBLE
GASKET MATERIAL
SEALANT
SHELF LADDER
STEP
LOCKNUT cont.
CABINET
HAND TOOL
SERVICEMANS HAND TOOL
STORAGE
TOOL BOX
TOOL CHEST
3-6
3-6
3-6
3-6
1-82
1-83
1-83
1-83
1-82 to 83
1-83
LOCKNUT
CHAIN WRENCH
CYLINDER
DIFFERENTIAL
HYDRAULIC
1-40
1-40
1-40
1-40
PINION
THREADED
WHEEL BEARING
WRENCH
1-40
1-40
1-43
1-43
LUBRICANT
ADDITIVE
3-32
ADHESIVE
3-7 to 8, 3-21, 3-31
AEROSOL
3-26
ALUMINUM MACHINE FLUID 3-30 to 31
BEADLESS TIRE
3-29
BREAK-IN LUBRICANT
3-27
CABLE
3-26
CAMSHAFT
3-27
CAULKING
3-7 to 8
CHAIN
3-26
CHEMICAL
3-7 to 9, 3-21, 3-30 to 31
CLEANING
3-26
COLD WEATHER STARTING
3-15
COMPOUND
3-31
COOLANT
3-24
COOLING SYSTEM
3-24
CRANKSHAFT GRINDING FLUID
3-30
CUTTING OIL
3-30
DEGREASER
3-26
DIAGNOSTIC
3-23 to 24
DRY FILM LUBRICANT
3-26
DYE
3-23 to 24
ENGINE
3-14 to 15
ENGINE TOOL
3-30
EXTREME PRESSURE LUBE
3-27
FAN DRIVE
3-28
FILM
3-26
FILTER
1-8, 1-40
FINAL DRIVE
3-18
FLUID
3-28, 3-31
GAS ENGINE
3-16
GEAR
3-19 to 20
GENERAL PURPOSE GREASE
3-21
GREASE
3-21 to 22, 3-30
GRINDING FLUID
3-30 to 31
HIGH TEMP
3-31
HYDRAULIC
3-19
HYDRAULIC CYLINDER
3-32
INSPECTION
3-23 to 24
LAPPING
3-31
LAPPING COMPOUND
3-31
LEAK DETECTION
3-23 to 24
MACHINING OIL
3-30
MAINTENANCE AIDS
3-23
MARINE ENGINE
3-28
MARINE GEAR
3-28
MOUNTING
3-30
MOUNTING KIT
3-30
MOUNTING TIRE
3-29 to 30
NON-AEROSOL
3-26
OIL
1-62, 3-14 to 20, 3-23 to 24,
3-26, 3-31 to 32
PENETRATE OIL
3-26
PIPE THREADING OIL
3-30
POWER TRAIN TOOL
3-29
RIM LUBRICANT
3-29
RUBBER
3-29 to 30
RUST PENETRATING
3-26
RUST PREVENTIVE
3-26, 3-31
S.O.S.
1-8, 1-40
SEAL
3-9, 3-32
SILICONE
3-28
SOLVENT
3-26
SPRAYER
3-26
STORAGE
3-31
TAP OIL
3-30
THREADING OIL
3-30
TIRE
3-30
TRACTOR
3-18
TRANSMISSION
1-62, 3-17
ULTRA LOW SULFER
3-15
ULTRA-VIOLET CRACK
DETECTION
3-23 to 24
VISCOUS CLUTCH FLUID
3-28
WATER DISPLACING
3-31
WATER SOLUBLE CUTTING OIL
3-30
WATER SOLUBLE OIL
3-24, 3-30 to 31
WHEEL & TIRE
3-29
LUBRICATION
BATTERY
1-57
BOLT
2-129
CHASSIS GREASE
3-21
COTTER PIN
2-129
COUPLER
1-56
COUPLING
1-56
GENERAL PUR LITHIUM
3-21
GENERAL PURPOSE GREASE
3-21
GREASE
3-21
GREASE GUN
1-56 to 57
HOSE ASSEMBLY TOOL
1-56
HYDRAULIC
2-129
LEAK DETECTION
3-23
LITHIUM BASED GREASE
3-21
LUBE EQUIPMENT
1-56, 3-21
OIL SOLUBLE DYE-VISIBLE
3-23
PUMP
2-129
REPAIR PART
1-56, 2-129
ZERK ADAPTER
1-56
M
MAGNETIC
HAND TOOL
SERVICEMANS HAND TOOL
TELESCOPING MAGNET
1-54
1-54
1-54
MAIN BEARING
ADAPTER
BEARING
MAIN CAP
TOOL
TORQUE
WRENCH
1-59
1-59
1-59
1-59
1-59
1-59
MANDREL
ABRASIVE
2-20
ADAPTER
2-16 to 17
CLEANING
2-9
DISC
2-8 to 11, 2-16 to 17, 2-22
ENGINE TOOL
2-8, 2-10 to 11
GRINDING
2-16 to 17
HOLDER
2-9, 2-16 to 17
IDLER
2-9
LIFT CYLINDER
2-9
MAST
2-9
POLISHING
2-24
POLISHING STAR
2-24
RECONDITIONING
2-9
SHAFT
2-8, 2-10 to 11
SURFACE RECONDITIONING
2-8 to 11,
2-16 to 17, 2-20, 2-22, 2-24
THREADED
2-8, 2-10 to 11
UNDERCARRIAGE
2-9
WHEEL
2-16 to 17
MANIFOLD
EXHAUST
EXHAUST MANIFOLD
HI-TEMP SEALANT
SEALANT
3-34
3-34
3-34
3-34
MARINE GEAR
CLUTCH DRIVE HUB
LUBRICANT
MARINE ENGINE
SILICONE
SOCKET EXTENSION
MARKER
AIR
IDENTIFIER
PACKAGING
PNEUMATIC
PNEUMATIC TOOL
TAPE
1-72
2-111
2-125
1-72
1-72
2-125
MEASURING TOOL
BEARING
CASE
GAUGE
GAUGE GROUP
HAND TOOL
1-53
1-85
1-4 to 8
1-8
1-4 to 8
nomen.qxd
9/15/06
2:17 PM
Page 9
Nomenclature Index
MEASURING TOOL cont.
HYDROSTAT
MEASURING
O-RING
PLASTIC CASE
POWER TRAIN
POWER TRAIN TOOL
PRESSURE
PRESSURE GAUGE
REPAIR PART
SERVICEMANS HAND TOOL
STORAGE
TESTING
TIRE GAUGE
TRANSMISSION
WHEEL & TIRE
1-8
1-53
2-130
1-85
1-85
1-4 to 8
1-8
1-8
1-85
1-4 to 8
1-85
1-8
1-4 to 8
1-85
1-4 to 8
METAL
ATOMIC ABSORPTION
CONOSTAN OIL STANDARD
CUTTING
DISC
ELEMENT
HOLDER
LIFT CYLINDER
MAST
OIL
RECONDITIONING
S.O.S.
STANDARD
SURFACE RECONDITIONING
3-33
3-33
2-9
2-9
3-33
2-9
2-9
2-9
3-33
2-9
3-33
3-33
2-9
2-28
2-40
2-40
2-46
2-38 to 40
2-40 to 42
2-42
2-46
2-38 to 39
2-34, 2-38 to 39
2-46
2-38 to 39
2-40
2-28, 2-34
2-35
2-32
2-34
2-38 to 39
METER
ADJUSTABLE
GOVERNOR
HYDRAULIC
SEAL
SOCKET
TESTING
1-15
1-15
2-49
2-49
1-15
2-49
MUD FLAP
ACCESSORY
MUD GUARD
RAIN FLAP
RAIN GUARD
2-112
2-112
2-112
2-112
N
NIPPLE
CAP
COUPLER
COUPLING
GREASE GUN
LUBE EQUIPMENT
POWER TRAIN
PRESSURE
QUICK DISCONNECT
REPAIR PART
TESTING TOOL
TORQUE
UN-VALVED
WRENCH
ZERK ADAPTER
1-8
1-56
1-56
1-56
1-56
1-8
1-8
1-8
1-56
1-8
1-61
1-8
1-61
1-56
NOZZLE
ADHESIVE
MIXER
SPRAYER
3-5
3-5
3-26
NOZZLE ASSEMBLY
COUPLER
COUPLING
EXTENSION NOZZLE
FLAMMABLE
GREASE GUN
LUBE EQUIPMENT
REPAIR PART
SAFETY TANK
SPRAY GUN
STORAGE
ZERK ADAPTER
1-56
1-56
1-74
1-74
1-56
1-56
1-56
1-74
1-74
1-74
1-56
O
O-RING SEAL
ACCESSORY
2-49, 2-112 to 114
FLUID EXTRACT TOOL 2-49, 2-112 to 114
FLUID SAMPLING
2-49, 2-112 to 114
OIL
2-49, 2-112 to 114
REPAIR PART
2-49, 2-112 to 114
SEAL
1-87, 2-49, 2-112 to 114
OIL
ACCESSORY
2-49, 2-112 to 114
ADAPTER
2-49, 2-113
ADDITIVE
3-20, 3-32
AEROSOL
3-26
ATOMIC ABSORPTION
3-33
AXLE HOUSING
3-20
BOTTLE
2-28
CLEANING
3-9, 3-26
COLD WEATHER STARTING
3-15
CONOSTAN OIL STANDARD
3-33
COOLANT
3-24
COOLING SYSTEM
3-24
CUTTING OIL
3-30
DEGREASER
3-26
DIAGNOSTIC
3-23 to 24
DRILL SET
2-28
DYE
3-23 to 24
ELEMENT
3-33
ENGINE
3-14 to 15
FILTER KIT
3-9
FINAL DRIVE
3-18
FLUID
3-31
FLUID EXTRACT TOOL
2-28, 2-49,
2-112 to 114
FLUID SAMPLING
2-28, 2-49,
2-112 to 114
GAS ENGINE
3-16
GEAR
3-19 to 20
GOVERNOR
3-32
HIGH TEMP
3-31
HYDRAULIC
3-19 to 20, 3-32
HYDRAULIC CYLINDER
3-32
INSPECTION
3-23 to 24
LEAK DETECTION
3-23 to 24
LUBE
3-32
LUBRICANT
1-62, 3-14 to 20,
3-23 to 24, 3-26, 3-31 to 32
MAINTENANCE AIDS
3-30
MARINE ENGINE
3-9
METAL
3-33
O-RING SEAL
2-49, 2-112 to 114
OIL SOLUBLE DYE-VISIBLE
3-23
PENETRATE OIL
3-26
PENETRATING
3-25
PROTECTIVE
3-29
PUMP OIL
3-28
REDUCER
2-49, 2-113
REFRIGERANT
3-28
REPAIR PART
2-49, 2-112 to 114
RUST PENETRATING
3-26
RUST PREVENTIVE
3-30 to 31
S.O.S.
3-33
SEAL
2-49, 2-112 to 114, 3-32
SOLVENT
3-26
SPRAYER
3-26
OIL cont.
STABILIZER
3-32
STANDARD
2-28, 3-33
STORAGE
3-30 to 31
TRACTOR
3-18
TRANSMISSION
1-62, 3-17
ULTRA LOW SULFER
3-15
ULTRA-VIOLET CRACK
DETECTION
3-23 to 24
VACUUM PUMP
3-29
VAPOR CORROSION INHIBITING
3-30
VISIBLE LIGHT
3-23
WATER DISPLACING
3-31
WATER SOLUBLE OIL
3-24
PAINT
PAINT REMOVER
PAINT STRIPPER
PAINT THINNER
PRIMER
PRIMER THINNER
SOAK STRIPPING
SOLVENT
STRIPING
TANK STRIPPER
THINNER
URETHANE
OIL PUMP
AIR COUPLER
AIR DISCONNECT
AIR MOTOR
GREASE PUMP
LUBE EQUIPMENT
QUICK DISCONNECT
1-62
1-62
1-62
1-62
1-62
1-62
P
2-120
2-117
2-125
2-120
2-124
2-121
2-121
2-120 to 121
2-116 to 117, 2-125
2-121
2-125
PACKING
BLOCK
BOX
CASE
FOAM
FUEL SYSTEM TOOL
GOVERNOR TOOL
INSERT
LINER
REPAIR PART
STORAGE
TESTER
TORQUE CONTROL TOOL
WIRING TESTER
1-85
1-85
1-85
1-85
1-85
1-85
1-85
1-85
1-85
1-85
1-85
1-85
1-85
PAD
ABRASIVE
2-15, 2-22
ABSORBENT
1-69
BACKING PAD
2-12 to 13
BUFFER
1-69
DISC
2-7 to 8, 2-10 to 11, 2-13
ENGINE TOOL
2-8, 2-10 to 11, 2-13
HOLDER
2-8, 2-10
SAFETY
1-69
SANDER
1-69
SANDING
1-69, 2-15, 2-22
SURFACE RECONDITIONING
2-7 to 8,
2-10 to 11, 2-13, 2-22
PAINT PRODUCTS
AEROSOL
ALUMINUM SAFE
DECAL REMOVER
EPOXY
FAST DRY
MUFFLER
PAPER TOWEL
CLEANING
DISPENSER
PAPER PRODUCT
WIPES
WYPALLS
2-107
2-106 to 107
2-106 to 108, 3-9
2-105 to 107, 3-9
2-105 to 107
PENETRATE OIL
AEROSOL
CLEANING
DEGREASER
LUBRICANT
OIL
RUST PENETRATING
SOLVENT
SPRAYER
3-26
3-26
3-26
3-26
3-26
3-26
3-26
3-26
PILOT
HELI-COIL
INSERT
2-40
2-40
PIN
PACKAGING
DISPENSER
FILAMENT
MARKER
MASTER
PAPER
SHIPPING
STORAGE
STRETCH FILM
TAPE
TRANSPARENT
WHEEL
3-38 to 40
3-40
3-40
3-39
3-39 to 40
3-39
3-40
3-25, 3-39 to 40
3-40
3-40
3-39 to 40
3-39 to 40
3-25, 3-38
3-40
3-40
3-40
3-38
3-40
BOLT
CHAIN
CHAIN WRENCH
CUTTING TOOL
CYLINDER
DRIVER
ENGINE
ENGINE TOOL
FILTER
FUEL SYSTEM TOOL
HAND TOOL
HYDRAULIC
INSTALLATION TOOL
LUBE SYSTEM TOOL
MAINTENANCE TOOL
MASTER
PIN REMOVER
REMOVAL TOOL
SPRING
STRAP WRENCH
TRACK
UNDERCARRIAGE
2-129
1-40
1-40
1-40
1-40
1-47 to 48
2-129
2-129
1-40
1-40
1-40, 1-47 to 48
1-40
2-129
1-40
1-40
2-129
1-47 to 48
2-129
1-40
1-40
2-129
2-129
PIPE
COUPLING
DIE
ORIFICE
PLUG
REWORK
SEAL
TAP
TAP SET
TAPER
THREAD REPAIR
2-35
2-33
2-35
2-35, 2-49
2-35
2-49
2-35
2-35
2-35
2-34
PLASTIC
CASE
CLEANING
FOAM BLOCK
JANITORIAL EQUIPMENT
PLASTIC COVER
PROTECTIVE
SHIPPING
STORAGE
WASTE DISPOSAL
1-85
3-9
1-85
2-127
3-9
2-122, 3-9
2-122
1-85, 2-122
2-127
PLATE
ACCESSORY
LIFTING
SLING
1-89
1-89
1-89
nomen.qxd
9/15/06
2:17 PM
Page 10
Nomenclature Index
PLIERS
HAND TOOL 1-2 to 5, 1-8, 1-51 to 52, 1-58
MASTER LINK
1-52
PISTON PIN
1-52
REPLACEMENT
1-52
RETAINER
1-52
RETAINING
1-52
RETAINING RING
1-52
RETAINING RING PLIERS
1-52
SERVICEMANS HAND TOOL
1-52
SNAP RING
1-52
SNAP RING PLIERS
1-52
TILT CYLINDER
1-52
TIP
1-52
UNDERCARRIAGE
1-52
PLUG
ADAPTER GROUP
2-50
ASSEMBLY
2-49
BOGIE
2-32
BRAKE
2-49
CAP
2-49 to 55
CONE
2-26
CONNECTOR
2-75
COUPLING
2-35
ELECTRICAL
2-75
ENGINE
2-50
ENGINE TOOL
2-50
FRAME & HITCH TOOL
2-49
GAUGE
2-49
HOSE
2-52 to 55
HYDRAULIC
2-49
O-RING
2-49
ORIFICE
2-35
PIPE
2-35, 2-49
PRESS
2-49
PROTECTION
2-49, 2-52 to 55
PROTECTOR
2-49 to 50
PUMP
2-49
REPAIR PART
2-49 to 50
REWORK
2-35, 2-42
SAFETY GOGGLES
2-54
SEAL
2-49
SHIPPING
2-49
SPIRALOCK THREADS
2-32
STEERING
2-50
STORAGE
2-52 to 55
SUPPLY
2-75
SURFACE RECONDITIONING
2-26
SUSPENSION
2-49
TAP
2-32, 2-35, 2-42
TAPER
2-35
TEE
2-49
TESTING
2-49
THREAD RESTORATION
2-35, 2-42
TIRE
2-49
TRANSPARENT
2-49
UNDERCARRIAGE
2-32
VEHICLE SYSTEM TOOLS
2-49
PNEUMATIC
AIR
AIR POWERED
ANTI-FREEZE
CHEMICAL
CLEANING
CUTTING
DRILL
GRINDING
GUN
HAMMER
HOSE
MARKER
PNEUMATIC TOOL
POLISHER
RATCHET
SANDER
WRENCH
1-71 to 72
1-73 to 74
3-35
3-25, 3-35
1-73 to 74
1-72
1-71
1-70
1-73 to 74
1-71 to 72
3-25, 3-35
1-72
1-69 to 74, 2-13,
3-25, 3-35
1-69
1-72
1-69, 2-13
1-62
PNEUMATIC TOOL
AIR
AIR POWERED
ANTI-FREEZE
CHEMICAL
1-72
1-73 to 74
3-35
3-25, 3-35
CHISEL
CLEANING
COLLECTOR
CUTTER BIT
CUTTING
ENGRAVER
GRINDING
GUN
HAMMER
HAND TOOL
HOSE
MARKER
NEEDLE
PNEUMATIC
POLISHER
PUNCH
RETAINER
REUSABLE
SANDER
SPRAY GUN
VACUUM
WELDING
EXTENSION
1-8, 1-21, 1-62
FINAL DRIVE
1-22
FOAM
1-85
GAUGE
1-4 to 8
HAND OPERATED
2-32
HAND TOOL
1-4 to 8, 1-22, 1-43
HYDROSTAT
1-85
LUBRICANT
3-29
MEASURING TOOL
1-4 to 8
MOUNTING TIRE
3-29
PINION
1-43
POWER SHIFT
2-49
PROTECTION
2-49
REPAIR PART
1-85
RIM
1-19, 1-62
RIM LUBRICANT
3-29
RUBBER
3-29
SEAL
2-49
SERVICEMANS HAND TOOL
1-4 to 8
SHAFT NUT
1-43
SOCKET
1-18 to 19, 1-33, 1-62
SOCKET WRENCH
1-43
STORAGE
1-85
STRUT
1-34, 1-61 to 62
TAP
2-32
THREAD RESTORATION
2-32
TIRE GAUGE
1-4 to 8
TORQUE
1-8, 1-18 to 19, 1-21,
1-34, 1-59, 1-61 to 62
TORQUING TOOL
1-59
VEHICLE SYSTEM TOOLS
1-22
WHEEL & TIRE 1-4 to 8, 1-18 to 19, 1-21,
1-34, 1-61 to 62, 1-85, 2-32, 3-29
WHEEL NUT
1-34, 1-61 to 62
WHEEL SALVAGE
2-32
WRENCH
1-8, 1-18 to 19, 1-21,
1-34, 1-59, 1-61 to 62
1-72
1-73 to 74
1-74
1-72
1-72
1-72
1-70
1-73 to 74
1-71 to 72
1-71
3-25, 3-35
1-72
1-72
1-69 to 74, 2-13, 3-25, 3-35
1-69
1-72
1-71
1-74
1-69, 2-13
1-74
1-74
1-72
POLISHING
ABRASIVE
2-24
BELT
2-24
BRUSH
2-5
CONNECTING ROD
2-16
CRANKSHAFT
2-24
CUTTING
2-22
DEBURRING
2-23, 2-27
DISC
2-13, 2-24
EMERY PAPER
2-26
GRINDING
2-16
MANDREL
2-24
PISTON TOOL
2-16
POLISHING STAR
2-13, 2-24
SANDING
2-23 to 24, 2-27
SURFACE RECONDITIONING
2-5, 2-13,
2-16, 2-22 to 24, 2-26 to 27
WHEEL
2-16
PRESS
GAUGE
HYDRAULIC
PLUG
2-49
2-49
2-49
POWER
BATTERY
BATTERY STARTING SYS
BOOSTER
CABLE
MOUNTED
SERVICE VEHICLE
SOCKET
2-61 to 63
2-61 to 63
2-61 to 63
2-61 to 63
2-62
2-62
2-61 to 63
POWER TRAIN
BOX
1-83
CAP
1-8
CASE
1-85
COUNTERSHIFT
1-43
COVER
1-83
HOSE ASSEMBLY
1-8
HYDRAULIC
1-8
MEASURING TOOL
1-85
NIPPLE
1-8
PLASTIC CASE
1-85
PLEXIGLASS
1-83
PRESSURE
1-8
QUICK DISCONNECT
1-8
REPAIR BOX
1-83
REPAIR PART
1-85
SOCKET
1-43
STORAGE
1-85
TEST GROUP
1-8
TESTING TOOL
1-8
TRANSMISSION
1-8, 1-43, 1-83, 1-85
UN-VALVED
1-8
WAREHOUSE EQUIPMENT
1-83
1-22
1-34, 1-61 to 62
3-29
1-85
2-129
1-59
1-43
1-22
1-8, 1-18, 1-21, 1-62
PRESSURE
ASSEMBLY
BOLT
CAP
COUPLING
DIFFERENTIAL
GAUGE
GAUGE GROUP
HEAT GUN
HYDROSTAT
MEASURING TOOL
NIPPLE
POWER TRAIN
PUMP
QUICK DISCONNECT
REPAIR PART
SHRINK WRAP
TESTING
TESTING TOOL
UN-VALVED
1-8
1-8
PRESSURE WASHER
ACID
ALKALINE
CHEMICAL
CLEANING
COIL CLEANER
CONCENTRATE
DEGREASER
DESCALANT
DETERGENT
HYDROSOLV CLEANER
PHOSPHORIC
SCALE
SOAP
ADJUSTABLE
2-81
CAP
2-52 to 55
CHEMICAL
2-88, 2-102 to 103
CHEMICAL RESISTANT
GLOVE
2-95 to 96, 2-102 to 103
DIELECTRIC GREASE
3-28
EAR PLUGS
2-80
GAUGE
1-61
GLASSES
2-81
GLOVES
2-92 to 96, 2-102 to 103
GROMMET
1-61
HARD HAT
2-89
HEARING PROTECTION
2-80
HOSE
2-52 to 55
LEATHER
2-95, 2-102 to 103
MAINTENANCE AIDS
2-96
NOISE PROTECTION
2-80 to 81
PERSONAL USE
2-81, 2-88,
2-93 to 95, 2-102 to 103
PLUG
2-49, 2-52 to 55
POWER SHIFT
2-49
POWER TRAIN TOOL
2-49
RAIN CLOTHING
2-91
REPAIR PART
2-49
REUSABLE
2-80
SAFETY
2-81, 2-84, 2-89,
2-93 to 96, 2-102 to 103
SEAL
2-49
SHIPPING
2-49
STORAGE
2-52 to 55
TUNE-UP
3-28
VEHICLE SYSTEM TOOLS
2-49
WELDING GLOVES
2-84, 2-94
PULLER
CRANKSHAFT
EXTENSION NOZZLE
GEAR
GUIDE
HAND TOOL
HYDRAULIC
2-40
1-2, 1-9, 1-21, 1-34
2-40
2-40
1-2, 1-9, 1-21, 1-34
2-40
PUMP
1-8
2-128
1-8
1-8
1-8
1-8, 2-123
1-8, 2-128
2-123
1-8, 2-128
1-8
1-8
1-8
2-128
1-8
2-128
2-123
1-8, 2-128
1-8
1-8
PRESSURE GAUGE
GAUGE
MEASURING TOOL
PROTECTION
3-10
3-10
3-10 to 11
3-10 to 11
3-10
3-10
3-10
3-10
3-11
3-10
3-10
3-10
3-10
ASSEMBLY
1-16
BOLT
2-128 to 129
COTTER PIN
2-129
DRIVE
1-16
ELECTRICAL
1-65
GAUGE GROUP
2-128
HAND TOOL
1-65
HEX KEY WRENCH
1-41
HYDRAULIC
1-16, 1-65, 2-49, 2-129
HYDROSTAT
1-41, 2-128
LOCKWASHER
2-129
LUBRICATION
2-129
O-RING
2-49
PLUG
2-49
PRESSURE
2-128
REPAIR PART
2-49, 2-128 to 129
SEAL
2-49
SOCKET
1-16
STEERING
2-49
SUPPLY
2-49
TEE
2-49
TEST GROUP
2-49
TESTING
2-49, 2-128
TORQUE
1-65
WRENCH
1-41, 1-65
Q
QUICK DISCONNECT
AIR COUPLER
AIR DISCONNECT
AIR MOTOR
CAP
GREASE PUMP
LUBE EQUIPMENT
NIPPLE
OIL PUMP
POWER TRAIN
PRESSURE
1-62
1-62
1-62
1-8
1-62
1-62
1-8
1-62
1-8
1-8
nomen.qxd
9/15/06
2:17 PM
Page 11
Nomenclature Index
QUICK DISCONNECT cont.
TESTING TOOL
UN-VALVED
REPLACEMENT cont.
1-8
1-8
R
RADIATOR
CONDITIONER
COOLANT
COOLING SYSTEM
EPOXY
KIT
REPAIR
SEALANT
TEST KIT
TEST STRIP
3-13
3-13
3-13, 3-34
3-34
3-13
3-34
3-34
3-13
3-13
REFRIGERANT
AIR CONDITIONING
AIR TOOL OIL
COMPRESSOR
OIL
PUMP OIL
VACUUM PUMP
3-29
3-29
3-29
3-28
3-28 to 29
3-29
REMOVAL TOOL
BOLT
HAND TOOL
INSTALLATION TOOL
MASTER
PIN
STUD REMOVER
TRACK
UNDERCARRIAGE
WEDGE
2-129
2-47
2-129
2-129
2-129
2-47
2-129
2-129
2-77
PLUNGER
PROTECTOR
RAZOR KNIFE
REPLACEMENT KIT
RESPIRATOR
RETAINING
RETAINING RING PLIERS
SAFETY
SERVICEMANS HAND TOOL
SNAP RING
SNAP RING PLIERS
STORAGE
TIP
UNDERCARRIAGE
UTILITY KNIFE
3-5
1-87
1-54
2-42
2-81
1-52
1-52
2-81
1-54
1-52
1-52
1-87
1-52
1-52
1-54
REPLACEMENT
ADAPTER FITTING
BIT
BLADE
CASE
FILTER
FOAM
FUSE
HAND TOOL
HELI-COIL
INSERT
KIT
KNIFE
O-RING
PADDING
PERSONAL USE
PLIERS
1-22
1-31
1-54
1-87
2-81
1-87
2-129
1-22, 1-54
2-42
1-87, 2-42
2-42
1-54
1-87
1-87
2-81
1-52
SAFETY cont.
FUEL
3-34
FUEL LINE
3-34
GAS ENGINE
3-34
LUBRICANT
3-26, 3-31
NON-AEROSOL
3-26
OIL
3-30 to 31
RUST PENETRATING
3-26
SOLVENT CUTBACK GREASE
3-31
STORAGE
3-30 to 31
VAPOR CORROSION INHIBITING
3-30
WATER DISPLACING
3-31
WELDING
2-84
WELDING COAT
2-83 to 84
WELDING GLOVES
2-84, 2-94
WELDING GOGGLES
2-83
WELDING HELMET
2-82 to 83
WELDING PROTECTION
2-79, 2-84
WELDING REPLACEMENT LENS
2-83
FILTER
PERSONAL USE
REPLACEMENT
SAFETY
2-81 to 82
2-81
2-81
2-81 to 82
RETAINER
HAND TOOL
HANDLE
PISTON PIN
PLIERS
PNEUMATIC TOOL
1-21, 1-71
1-21
1-52
1-52
1-71
RINGS
FILTER
FUEL SYSTEM TOOL
LUBE SYSTEM TOOL
MAINTENANCE TOOL
RETAINING
STRAP WRENCH
1-40
1-40
1-40
1-40
1-40
1-40
RIVET
HAND TOOL
INSTALLATION TOOL
PISTON
POPPER VALVES
SERVICEMANS HAND TOOL
TOOL SET
TRANSMISSION
1-53
1-53
1-53
1-53
1-53
1-53
1-53
ROD
CUTTING
MINI CUTTING TORCH
THREADED
2-48
2-48
2-130
ROLLER
CUTTING TOOL
FILTER
HAND TOOL
IDLER
RULE
SCRAPER
SERVICE KIT
TRACK
UNDERCARRIAGE
1-40
1-40
1-40
1-2 to 3, 1-54
1-3
1-2 to 3, 1-54
1-2 to 3, 1-54
1-2 to 3, 1-54
1-2 to 3, 1-54
RUBBER
ADHESIVE & SEALANT
BEADLESS TIRE
BONDING
COMPOUND
FLEXIBLE GASKET
FORM-IN-PLACE GASKET
LUBRICANT
MOUNTING TIRE
O-RING
POWER TRAIN TOOL
R.T.V.
REPAIR KIT
RIM LUBRICANT
SILICONE
WHEEL & TIRE
3-7
3-29
3-7
3-31
3-7
3-7
3-29 to 30
3-29
3-31
3-29
3-7
3-2
3-29
3-7
3-29
RUST PREVENTIVE
ADDITIVE
AEROSOL
CABLE
CHAIN
COATING
3-34
3-26
3-26
3-26
3-31
SALVAGE
CRACK REPAIR
SURFACE RECONDITIONING
THREAD REPAIR
1-78
2-48
1-77 to 78
SANDER
SAFETY
RESPIRATOR
REPAIR KIT
BEARING MOUNT
3-1, 3-3
BREAKER BAR
1-20
COARSE
2-37 to 38
COMPOUND
3-1, 3-3
EPOXY
3-34
FUEL TANK REPAIR KIT
3-34
HAND TOOL
1-14 to 15, 1-20 to 21, 1-58
HELI-COIL
2-37 to 38, 2-42
HYDRAULIC
1-63 to 64
IMPACT
1-66 to 68
INSERT
2-38, 2-42
KIT
1-15, 1-20 to 21, 2-42, 3-34
PIPE THREAD SEALANT
2-113, 3-1, 3-5
PRIMER
3-1, 3-5
RATCHET
1-14 to 15, 1-20 to 21, 1-58
REPAIR
1-14, 1-20 to 21, 2-37 to 38
REPAIR PART
1-15, 1-20 to 21
RUBBER
3-2
SEALANT
2-113, 3-1, 3-3, 3-5, 3-34
SERVICE KIT
1-58
SERVICEMANS HAND TOOL
1-14,
1-20 to 21
SOCKET
1-14, 1-20 to 21
THREAD REPAIR
2-37 to 38
TOOL
1-64
TOOL SET
1-14, 1-20 to 21
TORQUE
1-58, 1-63
TORQUING TOOL
1-64
WRENCH
1-15, 1-20 to 21, 1-58,
1-63 to 64
ELECTRIC MOTOR
PAD
PNEUMATIC
PNEUMATIC TOOL
2-12 to 13
1-69
1-69, 2-13
1-69, 2-13
SAW
BLADE
1-3, 1-45, 1-76
HACKSAW
1-3, 1-45, 1-76
HAND TOOL
1-3, 1-45, 1-76
SABER
1-45, 1-76
SERVICEMANS HAND TOOL 1-45, 1-76
TOOL
1-45
SCALE
ACID
COIL CLEANER
DESCALANT
HYDROSOLV CLEANER
PHOSPHORIC
PRESSURE WASHER
STAINLESS STEEL
3-10
3-10
3-10
3-10
3-10
3-10
1-50
SCREW
BOLT
BOLT EXTRACTOR
BOLT REMOVER
CAP
HAND TOOL
HOLLOW HEAD
REPAIR PART
SCREW EXTRACTOR
SERVICEMANS HAND TOOL
TOOL SET
WRENCH
2-128
2-44 to 45
2-44 to 45
2-129
2-44 to 45
1-43
2-128
2-44 to 45
2-44 to 45
2-44 to 45
1-43
SCREWDRIVER
HAND TOOL
PLASTIC HANDLE
SCREWDRIVER
1-2 to 9, 1-44 to 45
1-2, 1-45
SEAL
ACCESSORY
2-49, 2-112 to 114
ADDITIVE
3-32
ASSEMBLY
2-49
BRAKE
2-49
CHEMICAL
3-9
CUP
1-54
FASTENER
2-123
FLUID EXTRACT TOOL 2-49, 2-112 to 114
FLUID SAMPLING
2-49, 2-112 to 114
FRAME & HITCH TOOL
2-49
HAND TOOL
1-3, 1-54
HYDRAULIC
2-49
HYDRAULIC CYLINDER
3-32
LUBRICANT
3-9, 3-32
METER
2-49
O-RING
2-49
O-RING KIT
1-87
O-RING SEAL
1-87, 2-49, 2-112 to 114
OIL
2-49, 2-112 to 114, 3-32
PICK
1-54
PIPE
2-49
PLUG
2-49
POWER TRAIN TOOL
2-49
PROTECTION
2-49
PUMP
2-49
REPAIR PART
2-49, 2-112 to 114
SEAL PICK
1-54
SERVICEMANS HAND TOOL
1-3, 1-54
SHIPPING
2-49
SPRAYER
3-26
nomen.qxd
9/15/06
2:17 PM
Page 12
Nomenclature Index
SEAL cont.
STEERING
SUPPLY
SUSPENSION
TEST GROUP
TESTING
TIRE
TRANSPARENT
VEHICLE SYSTEM TOOLS
SLING cont.
2-49
2-49
2-49
2-49
2-49
2-49
2-49
2-49
SEAL KIT
CLEANING
HARDWARE KIT
HYDRAULIC
HYDRAULIC WRENCH
KEY PAD
SQUARE DRIVE
TORQUE
WRENCH
2-111
2-111
DISC
2-8, 2-10 to 11
ENGINE TOOL
2-8, 2-10 to 11
MANDREL
2-8, 2-10 to 11
SURFACE RECONDITIONING
2-8,
2-10 to 11
THREADED
2-8, 2-10 to 11
SHOP
2-110
1-73
1-73
2-110
2-115
1-73
2-56
2-56
2-115
2-115
2-56
2-56
SHRINK TUBING
CONNECTOR
ELECTRICAL
HEAT SHRINK
INSULATOR
2-77
2-76 to 77
2-76
2-77
SHRINK WRAP
FUEL LINE
GAUGE
GUARD
HEAT GUN
HEAT SHRINK
HOSE ADAPTER
PRESSURE
PROTECTIVE
REGULATOR
SPARK PLUG
STORAGE
VALVE ASSEMBLY
2-123
2-123
2-123
2-123
2-121
2-123
2-123
2-121
2-123
2-123
2-121
2-123
SLEEVE
HELI-COIL
INSERT
LIFTING
PROTECTIVE
SLEEVE ASSEMBLY
SLING
2-40
2-40
1-89
1-89
2-40
1-89
SLING
ACCESSORY
ASSEMBLY
LEVEL ASSEMBLY
LIFTING
LOAD LEVELER
PLATE
PROTECTIVE
SHACKLE
SLEEVE
TAG
SMOKE CANDLE
AIR LEAK DETECTION
BOMB
CANDLE
LEAK DETECTION
PLIERS
REPLACEMENT
RETAINING
SNAP RING PLIERS
TIP
UNDERCARRIAGE
3-23
3-23
3-23
3-23
1-8, 1-89
1-88
1-88
1-8, 1-88 to 90
1-88
1-89
1-89
1-8, 1-89
1-89
1-88
1-52
1-52
1-52
1-52
1-52
1-52
SOCKET
ADAPTER
SHAFT
ACCESSORY
AIR
DISPLAY
FLOOR MAT
FUNNEL
HOSE
JAW INSERT
KIT
OIL DISPENSING
PUMP CAN
SWIVEL
VISE
1-90
1-88
SNAP RING
3-9
2-128
1-63
1-64
2-128
1-64
1-63
1-63
SERVICE
CREEPER, MECHANICS
SERVICE TOOL
TIRE
TRANSMISSION
SOCKET cont.
STARTER cont.
RETAINING NUT
1-19, 1-33
RIM
1-19, 1-62
SERVICE VEHICLE
2-62
SERVICEMANS HAND TOOL
1-1 to 15,
1-17 to 23, 1-29, 1-31,
1-33 to 34, 1-43 to 44, 1-54
SOCKET EXTENSION
1-3 to 4, 1-6, 1-9,
1-12, 1-21
SOCKET WRENCH 1-19, 1-33 to 34, 1-43
SPARK PLUG
1-13, 1-18, 1-44
SPARK PLUG SOCKET
1-44
SUSPENSION
1-19, 1-43
TOOL 1-1, 1-5, 1-22, 1-26, 1-32, 1-34,1-54
TOOL SET 1-1 to 15, 1-17 to 23, 1-29, 1-31,
1-33 to 34, 1-43 to 44, 1-54
TORQUE
1-13, 1-18 to 19, 1-44, 1-62
TORQUE CONTROL TOOL
1-2, 1-9, 1-17
TORX
1-3, 1-16
TRACK
1-19
TRANSMISSION
1-17, 1-43
U-JOINT
1-23
UNIVERSAL 1-1 to 2, 1-13, 1-17, 1-28, 1-32
UNIVERSAL JOINT
1-2, 1-9, 1-17,
1-22, 1-34
WHEEL & TIRE
1-18 to 19, 1-62
WRENCH
1-3 to 7, 1-9 to 15, 1-17 to 19,
1-27, 1-29 to 30, 1-32 to 34,
1-43 to 44, 1-62, 1-66 to 68, 1-80
STARTING SYSTEM
UNIVERSAL
SOLVENT
AEROSOL
AIR CONDITION TOOL
AIR CONDITIONING
CLEANING
DEGREASER
EPOXY
HIGH FLASH
LUBRICANT
MAINTENANCE AIDS
MINERAL SPIRIT
OIL
PAINT
PAINT PRODUCTS
PAINT THINNER
PENETRATE OIL
PRIMER
PRIMER THINNER
RETARDER
SPRAYER
THINNER
URETHANE
WASHER
3-25
3-29
3-29
3-25 to 26
3-26
3-40
3-25
3-26
3-25
3-25
3-26
3-39 to 40
3-25, 3-39 to 40
3-39 to 40
3-26
3-39 to 40
3-39 to 40
3-40
3-26
3-39 to 40
3-40
3-25
SPACER
CUTTING
HAND TOOL
1-40
1-40
SPANNER WRENCH
HAND TOOL
SERVICEMANS HAND TOOL
SPANNER
TOOL SET
WRENCH
1-8, 1-41
1-8, 1-41
1-40
1-8, 1-41
1-40
SPRAY BOTTLE
BOTTLE
3-27
STAND
ADAPTER
1-22 to 23
COTTER PIN
2-129
CYLINDER
1-22 to 23
ENGINE LIFTING & POSITIONING 2-129
ENGINE OVERHAUL
2-129
ENGINE RE-BUILD
2-129
ENGINE REPAIR
2-129
ENGINE ROLL-OVER TOOL
2-129
HYDRAULIC
1-22 to 23
MULTIPLIER
1-22 to 23
REPAIR
1-22 to 23
TORQUE
1-22 to 23
STORAGE
ACCESSORY
1-85
BLOCK
1-61, 1-85
BOX
1-85 to 87, 2-122
CABINET
1-80 to 83
CAP
2-52 to 55
CASE
1-61, 1-85 to 87
COATING
3-31
CONNECTOR
1-86
COVER
1-80
DIVIDER
1-85
DIVIDER KIT
1-85
EXTENSION NOZZLE
1-74
FLAMMABLE
1-74
FOAM
1-61, 1-85, 1-87
FOAM BLOCK
1-85
FOAM PAD
1-85
HAND TOOL
1-2, 1-8, 1-15, 1-82 to 83
HEAT SHRINK
2-121
HOSE
2-52 to 55
HYDROSTAT
1-85
INSERT
1-61, 1-85, 1-87
LINER
1-85
LOCK
1-83
LUBRICANT
3-31
MEASURING TOOL
1-85
NOZZLE ASSEMBLY
1-74
O-RING KIT
1-86
OIL
3-30 to 31
PACKAGING
2-121
PACKING
1-85
PADDING
1-61, 1-85, 1-87
PAPER
2-122
PLASTIC
1-85, 2-122
PLASTIC CASE
1-85
PLUG
2-52 to 55
POWER TRAIN
1-85
POWER TRAIN TOOL
1-85
PROTECTION
2-52 to 55
PROTECTIVE
2-121 to 122
PROTECTOR
1-87
REPAIR PART
1-61, 1-85
REPLACEMENT
1-87
RUST PREVENTIVE
3-30 to 31
SAFETY GOGGLES
2-54
SAFETY TANK
1-74
SERVICEMANS HAND TOOL
1-2, 1-8,
1-15, 1-82 to 83
SHIPPING
2-121 to 122
SHRINK WRAP
2-121
SOLVENT CUTBACK GREASE
3-31
SPRAY GUN
1-74
STORE CABINET
1-79, 1-85
SURE SEAL
1-86
TOOL BOX
1-2, 1-8, 1-15, 1-80 to 83
TOOL CHEST
1-2, 1-8, 1-15, 1-82 to 83
TOOL STORAGE
1-83
TOP DECK
1-80
TRANSMISSION
1-85
VAPOR CORROSION INHIBITING
3-30
VIBRATION
1-87
WAREHOUSE EQUIPMENT
1-2, 1-8,
1-15, 1-82 to 83
WATER DISPLACING
3-31
WHEEL & TIRE
1-85
STRAP
ADJUSTMENT
COIL
FUEL SYSTEM TOOL
LUBE SYSTEM TOOL
MAINTENANCE TOOL
NYLON
TIE
2-122
2-122
1-40
1-40
1-40
2-123
2-111
STUD
INSTALLER
2-47
SUPPORT
STARTER
ENGINE STARTING
EXTENSION
1-22
1-22
1-22
1-22
BRACKET
BRAKE
COLUMN
2-16 to 18
2-35
2-35
nomen.qxd
9/15/06
2:17 PM
Page 13
Nomenclature Index
SUPPORT cont.
GRINDING
HOLDER
HOUSING
STEERING
SURFACE RECONDITIONING
TAP
VALVE STEM
WHEEL
TACHOMETER cont.
2-16 to 18
2-16 to 18
2-35
2-35
2-16 to 18
2-35
2-16 to 18
2-16 to 18
SURFACE RECONDITIONING
ABRASIVE
SWIVEL
JAW INSERT
REPAIR PART
SHOP
UNIVERSAL JOINT
VISE
2-56
1-22
2-56
1-22
2-56
2-129
2-129
TAG
LOAD LEVELER
SLING
1-88
1-88
TAP
BEVEL GEAR
2-35
BOGIE
2-32, 2-35
BRAKE
2-35
BUTTRESS TAPS
2-35
CASE
2-35
COLUMN
2-35
COUPLING
2-35
GUIDE
2-40
HAND OPERATED
2-31 to 32, 2-35, 2-42
HELI-COIL
2-37 to 40
HOUSING
2-35
IMPLEMENT AND LIFT
ARM TOOL
2-32, 2-35, 2-42
INSERT
2-37 to 40
LINKAGE PINS
2-32, 2-35, 2-42
MACHINE
2-31
METAL CUTTING THREAD INSERT 2-35
METRIC
2-35, 2-39, 2-42
ORIFICE
2-35
PIPE
2-35
PLUG
2-32, 2-35, 2-42
POWER TRAIN TOOL
2-32
RECONDITIONING
2-32
REWORK
2-35, 2-42
SPIRALOCK THREADS
2-32, 2-35
STANDARD
2-39
STEERING
2-35
STEERING CLUTCH
2-35
SUPPORT
2-35
TAP SET
2-35
TAPER
2-35
THREAD RESTORATION 2-32, 2-35, 2-42
UNDERCARRIAGE
2-32, 2-35
WHEEL & TIRE
2-32
WHEEL SALVAGE
2-32
WRENCH
2-32, 2-36
TAPE
ALUMINUM
2-118, 2-125
BLOCK
3-2
CHEMICAL
3-2
DISPENSER
2-119
DUCT
2-118
ELECTRICAL
2-76, 2-118
ELECTRICAL TAPE
2-118
ENGINE REPAIR
3-2
FILAMENT
2-117, 2-119
MARKER
2-125
MASKING
2-116
PACKAGING
2-116 to 117, 2-125
PAINT
2-116
RUBBER MASTIC TAPE
2-119
TAPE DISPENSER
2-76
THREAD LUBRICANT
2-117
TRANSPARENT
2-117, 2-119
WHEEL
2-125
TAPE MEASURE
FLEXOMETER
1-3, 1-49 to 50
HAND TOOL
1-3, 1-49 to 50
MEASURE
1-49
MEASURING
1-3, 1-49 to 50
MEASURING RULE
1-3, 1-49 to 50
MEASURING TAPE
1-3, 1-49 to 50
PERSONAL USE
1-49
SERVICEMANS HAND TOOL
1-3,
1-49 to 50
TEE
T
TACHOMETER
BOLT
DIAGNOSTIC
MARINE ENGINE
STEERING
TEST GROUP
WASHER
2-128
2-128
2-129
2-129
FITTING
HYDRAULIC
PLUG
PUMP
STEERING
TEST GROUP
TESTING
WASHER
2-49
2-49
2-49
2-49
2-128
2-128
2-49, 2-128
2-128
TEST KIT
ADDITIVE
ANTI-FREEZE ADDITIVE
ANTI-FREEZE CONCENTRATE
CHEMICAL
CONDITIONER
COOLANT
COOLANT CONDITIONER
COOLING SYSTEM
DISTILLATION
KIT
RADIATOR
TEST STRIP
3-12
3-12
3-12
3-13
3-13
3-12 to 13
3-12 to 13
3-13
3-12
3-13
3-13
3-13
TESTING
ASSEMBLY
1-8
BOLT
2-128 to 129
COUPLING
1-8
COVER
2-50
DIFFERENTIAL
1-8
DRIVE
2-129
FITTING
2-49
GAUGE
1-8
GAUGE GROUP
1-8, 2-128
GROWLER ARMATURE TEST
2-60
HYDRAULIC
2-49 to 50, 2-128 to 129
HYDROSTAT
1-8, 2-128
MEASURING TOOL
1-8
METER
2-49
PLUG
2-49
PRESSURE
1-8, 2-128
PUMP
2-49, 2-128
REPAIR PART
2-128
SEAL
2-49
STEERING
2-128
TEE
2-49, 2-128
TEST GROUP
2-60, 2-128
WASHER
2-128
THREADED
CHAIN WRENCH
1-40
CYLINDER
1-40
DIE
2-33
DIFFERENTIAL
1-40
DISC
2-8, 2-10 to 11
DRILL
2-38
ENGINE TOOL
2-8, 2-10 to 11
HARDWARE KIT
2-130
HYDRAULIC
1-40
INSERT
2-43
LOCKNUT
1-40
MANDREL
2-8, 2-10 to 11
METRIC
2-43
PINION
1-40
ROD
2-130
SHAFT
2-8, 2-10 to 11
SURFACE RECONDITIONING
2-8,
2-10 to 11
THREAD REPAIR
2-34, 2-38
THREAD RESTORATION
2-34
TIMING
CASE
FUEL SETTING
FUEL SYSTEM TOOL
GOVERNOR TOOL
TOOL GROUP
TORQUE CONTROL TOOL
1-85
1-85
1-85
1-85
1-85
1-85
TISSUES
SAFETY GLASSES
WIPES
2-88
2-88
TOOL BOX
BOX
CABINET
CONTAINER
COVER
DRAWER LINER
FOAM PAD
HAND TOOL
LOCK
PADDING
REPAIR PART
1-83
1-80 to 83
1-84
1-80
1-83
1-83
1-2, 1-6, 1-8 to 9,
1-15, 1-82 to 83
1-82 to 83
1-83
1-83
TOOL STORAGE
ACCESSORY
CABINET
HAND TOOL
RATCHET
STAINLESS STEEL
STORAGE
STORE CABINET
THREAD REPAIR
TOOL BAG
TOOL BOX
TOOL HOLDER
WRENCH
1-79
1-79
1-4 to 5
1-4 to 5
1-79
1-83
1-79
2-34
1-83
1-83
2-34
1-23
TORCH
CLAMP KIT
CONTINUITY TESTER
ELECTRICAL PRODUCT
FLASHLIGHT
HOLSTER
LIGHT
PERSONAL USE
SAFETY
TESTER
2-67
2-68
1-3, 2-67
1-3, 2-67 to 68
2-67
1-3, 2-67 to 68
1-3, 2-67 to 68
1-3, 2-67 to 68
2-68
TORQUE
ADAPTER
1-22 to 23, 1-59
AIR REGULATED
1-34, 1-61 to 62
BAR
1-61
BEARING
1-59
BLOCK
1-61
BOX WRENCH
1-2 to 3, 1-51, 1-59
CAMSHAFT
1-59
CLICK TYPE
1-58
COUPLER
1-61
CROWFOOT
1-59
CYLINDER
1-22 to 23
CYLINDER HEAD TOOL
1-13, 1-18, 1-44
DEGREE WHEEL
1-60
DIAL TYPE
1-23, 1-58 to 59
DRIVER
1-59
DUAL WHEEL
1-8, 1-18, 1-21, 1-62
ELECTRIC
1-61
ELECTRONIC
1-61
EXTENSION
1-2 to 3, 1-8, 1-21,
1-51, 1-59, 1-62
GAUGE
1-61
HAND IMPACT
1-65
HAND TOOL
1-59
HOSE
1-61
HYDRAULIC
1-22 to 23, 1-63 to 65
IMPACT SOCKET
1-65
IMPACT TOOL
1-65
MAIN BEARING
1-59
MAIN CAP
1-59
MOTOR GRADER
SERVICE TOOL
1-58 to 59
MOUNTING BRACKET
1-61
MULTIPLIER
1-22 to 23, 1-34, 1-60 to 61
NIPPLE
1-61
POWER TRAIN TOOL
1-8, 1-18 to 19,
1-21, 1-34, 1-59, 1-61 to 62
PUMP
1-65
REGULATOR
1-61
REPAIR
1-22 to 23
REPAIR KIT
1-58, 1-63
RIM
1-19, 1-62
SEAL KIT
1-63
SERVICE KIT
1-58
SERVICEMANS HAND TOOL
1-65
SOCKET
1-13, 1-18 to 19, 1-44, 1-62
SPARK PLUG
1-13, 1-18, 1-44
STAND
1-22 to 23
nomen.qxd
9/15/06
2:17 PM
Page 14
Nomenclature Index
TORQUE cont.
TUBE cont.
STRUT
TESTER
TOOL
TOOL SET
TUBE WRENCH
TUBULAR ARM
WHEEL & TIRE
VIBRATION
WORK LIGHT
1-34, 1-61 to 62
1-61
1-59
1-65
1-59
1-59
1-8, 1-18 to 19,
1-21, 1-34, 1-61 to 62
WHEEL NUT
1-34, 1-61 to 62
WRENCH
1-2 to 3, 1-8, 1-18 to 19, 1-21,
1-23, 1-34, 1-51, 1-58 to 65
TORQUING TOOL
ADAPTER
BOX WRENCH
POWER TRAIN TOOL
RAMP-RIGHT HANDED
REPAIR KIT
TOOL
WRENCH
1-59
1-59
1-59
1-58
1-64
1-64
1-59
TORX
HAND TOOL
SOCKET
WRENCH
TRACK LINK
FIXTURE
WELDING
2-128
2-128
TRANSFORMER
ADAPTER
BULB
CARRYING CASE
ELECTRICAL PRODUCT
LAMP
MICROFILM VIEW
2-110
2-110
2-110
2-110
2-110
2-110
TRANSMISSION
ASSEMBLY
1-88
AUTOMATIC
3-32
BOLT
2-129
BOX
1-83
BRACKET
2-129
CASE
1-85
COUNTERSHIFT
1-43
COVER
1-83
FLUID
3-32
HAND TOOL
1-17, 1-53
HOSE ASSEMBLY
1-8
HYDRAULIC
1-8
LIFTING
1-88
LUBRICANT
1-62, 3-17
MEASURING TOOL
1-85
OIL
1-62, 3-17
PISTON
1-53
PLASTIC CASE
1-85
PLEXIGLASS
1-83
POPPER VALVES
1-53
POWER TRAIN
1-8, 1-43, 1-83, 1-85
REMOVAL
2-129
REPAIR BOX
1-83
REPAIR PART
1-85
RIVET
1-53
SERVICEMANS HAND TOOL 1-17, 1-53
SLING
1-88
SOCKET
1-17, 1-43
STORAGE
1-85
TEST GROUP
1-8
TOOL SET
1-17, 1-53
UNIVERSAL JOINT
1-17
WAREHOUSE EQUIPMENT
1-83
TUBE
ADJUSTABLE
BALLAST
CRANKSHAFT
DAMPER
ELECTRIC LIGHT
ENGINE TOOL
FLUORESCENT LIGHT
LIGHT
PORTABLE LIGHT
REPAIR GROUP
SPRAYER
3-26
2-72
3-28
3-28
2-71 to 72
3-28
2-71 to 72
2-71 to 72
2-71 to 72
3-28
3-26
GRINDING
SURFACE RECONDITIONING
WHEEL
2-25
2-25
2-25
TURBO CHARGER
ANTI-SEIZE
EXHAUST MANIFOLD
EXHAUST SYSTEM
GREASE
HIGH LOAD GREASE
HIGH TEMP
MUFFLER
REBUILDING
SILICONE
3-27
3-27
3-27
3-28
3-27
3-27
3-27
3-28
3-28
U
UNDERCARRIAGE
BOGIE
2-32, 2-35
BOLT
2-129
CLEANING
2-9
DISC
2-9
ENGINE
2-129
ENGINE TOOL
2-129
FLOW METER
2-129
HAND OPERATED
2-35
HOLDER
2-9
IDLER
1-2 to 3, 1-54, 2-9
INSTALLATION TOOL
2-129
LINK
2-9
LOCKWASHER
2-129
MANDREL
2-9
MASTER
2-129
MASTER LINK
1-52
PIN
2-129
PLIERS
1-52
PLUG
2-32
REMOVAL TOOL
2-129
REPLACEMENT
1-52
RETAINING
1-52
RETAINING RING PLIERS
1-52
ROLLER
1-2 to 3, 1-54
RULE
1-3
SCRAPER
1-2 to 3, 1-54
SERVICE KIT
1-2 to 3, 1-54
SNAP RING
1-52
SNAP RING PLIERS
1-52
SPIRALOCK THREADS
2-32, 2-35
SURFACE RECONDITIONING
2-9
TAP
2-32, 2-35
TIP
1-52
TRACK
1-2 to 3, 1-54, 2-129
VEHICLE SYSTEM TOOLS
2-129
UNIVERSAL
DRIVE
1-23
DRIVER
1-1 to 2, 1-13, 1-17
ENGINE STARTING
1-22
EXTENSION
1-22
LEVEL
1-49
SOCKET
1-1 to 2, 1-13, 1-17, 1-28, 1-32
STARTER
1-22
STARTING SYSTEM
1-22
UNIVERSAL JOINT
1-1, 1-22
V
VACUUM PUMP
AIR CONDITIONING
AIR TOOL OIL
COMPRESSOR
OIL
PROTECTIVE
PUMP OIL
REFRIGERANT
3-29
3-29
3-29
3-29
3-29
3-29
3-29
VALVE
ADJUSTABLE
CYLINDER HEAD TOOL
TAPPET WRENCH
WRENCH
VALVE SEAT
DRILL
2-25
VIEWER
2-110
2-110
VISE
ACCESSORY
BENCH VISE
INSERT
JAW CAP
JAW INSERT
KIT
PIPE VISE
SHOP
SWIVEL
WRENCH
JANITORIAL EQUIPMENT
LINER
2-126
2-126
WELDING
1-22
2-129
2-50
1-22
2-129
2-129
1-22
2-129
1-22
2-129
2-49
1-22
2-49
2-49
2-49
2-49
2-129
WASTE RECEPTACLE
2-56 to 57
2-56 to 57
2-56
2-57
2-56 to 57
2-56
2-56 to 57
2-56
2-56
1-2 to 3, 1-51
W
WAREHOUSE EQUIPMENT
BOX
1-83
CABINET
1-82
COVER
1-83
HAND TOOL
1-2, 1-8, 1-15, 1-82 to 83
PLEXIGLASS
1-83
POWER TRAIN
1-83
REPAIR BOX
1-83
REPAIR PART
1-83
SERVICEMANS HAND TOOL
1-2, 1-8,
1-15, 1-82 to 83
STORAGE
1-2, 1-8, 1-15, 1-82 to 83
TOOL BOX
1-2, 1-8, 1-15, 1-82 to 83
TOOL CHEST
1-2, 1-8, 1-15, 1-82 to 83
TRANSMISSION
1-83
WASHER
CALIPER
2-129
CENTERING
1-61, 2-129
CLEANING
3-25
COLLET
2-46
ENGINE LIFTING & POSITIONING 2-129
ENGINE OVERHAUL
2-129
ENGINE RE-BUILD
2-129
ENGINE REPAIR
2-129
ENGINE ROLL-OVER TOOL
2-129
EXTRACTOR
2-46
FLUID
3-9
HIGH FLASH
3-25
HOUSING
2-46
MARINE ENGINE
2-129
MINERAL SPIRIT
3-25
MINI CUTTING TORCH
2-48
SOLVENT
3-25
STEERING
1-61, 2-128 to 129
STUD REMOVER
2-46
TACHOMETER
2-129
TEE
2-128
TEST GROUP
1-61, 2-128 to 129
TESTING
2-128
TOOL
1-61, 2-129
TRAVEL MOTOR D&A TOOLS 1-61, 2-129
WINDSHIELD
3-9
ANTI-SPATTER COMPOUND
BIB
BORING & WELDING COMPOUND
CHISEL
FIXTURE
FLUX CORED
MIG WELDING
PNEUMATIC TOOL
SAFETY
TIP LUBE
TRACK LINK
WELDING COAT
WELDING PROTECTION
WIRE WELDING
3-35
2-84
3-35
1-72
2-128
3-35
3-35
1-72
2-84
3-35
2-128
2-84
2-84
3-35
WHEEL
ABRASIVE
2-17 to 20
ACCESSORY
2-21
ADAPTER
2-16 to 17
BENCH
2-21
BRACKET
2-16 to 18
BRUSH
2-3, 2-18
CLEANING
2-19
CONNECTING ROD
2-16
CUT-OFF WHEEL
2-20
CUTTING
1-51, 2-20
DISC
2-16 to 17
DRILL
2-21, 2-25
DRILL SHARPENING
2-21
GRINDING
2-16 to 22, 2-25
HOLDER
2-16 to 18
MANDREL
2-16 to 17
PACKAGING
2-125
PEDESTAL
2-21
PIPE CUTTER
1-51
PISTON TOOL
2-16
POLISHING
2-16
RIM
3-29
SEALANT
3-29
SUPPORT
2-16 to 18
SURFACE RECONDITIONING
2-2 to 3,
2-16 to 22, 2-25
TAPE
2-125
TUBING CUTTER
1-51
VALVE SEAT
2-25
VALVE STEM
2-16 to 18
WHEEL LOADER
3-29
WIRE
2-2 to 3
WINDOW
ADHESIVE
BURNING
CAULKING
CLEANING
GLASS
HANDLE
HEAT
HOLDER
KNIFE
TOOL KIT
WINDOW INSTALLATION
WINDSHIELD
WIRE
3-8
3-8
3-8
3-8
1-54
1-54
3-8
3-8
3-8
3-8
1-54
1-54
3-8
WIPES
ABSORBENT
CLEANING
DISPENSER
PAPER PRODUCT
PAPER TOWEL
SAFETY GLASSES
TISSUES
WYPALLS
2-104 to 105
2-104 to 105, 2-107
2-106 to 107
2-106 to 107, 3-9
2-105 to 107, 3-9
2-88
2-88
2-105 to 107
WIRE
BRUSH
CRIMP TOOL
SURFACE RECONDITIONING
TIE
2-3
2-76
2-2 to 3
2-111
nomen.qxd
9/15/06
2:17 PM
Page 15
Nomenclature Index
WIRE cont.
WHEEL
WINDOW
WRENCH cont.
2-2 to 3
3-8
WORK LIGHT
BALLAST
CHOP SAW
CLAMP KIT
ELECTRIC LIGHT
FLUORESCENT
FLUORESCENT LIGHT
HAND TOOL
LIGHT
PERSONAL USE
PORTABLE LIGHT
TUBE
VAPOR CLAMP KIT
2-72
2-72
2-71
2-71 to 72
2-71 to 72
2-71 to 72
2-71
2-71 to 72
2-71
2-71 to 72
2-71 to 72
2-71
WRENCH
ACCESSORY
1-64
ADAPTER
1-12, 1-59
ADJUSTABLE
1-1, 1-3, 1-24, 1-39
AIR REGULATED
1-34, 1-61 to 62
ALLEN WRENCH
1-3, 1-8 to 9, 1-42
ASSEMBLY
1-43
BAR
1-43, 1-61
BEARING
1-59
BIT
1-31
BLOCK
1-61
BOLT
1-39
BOX
1-39
BOX WRENCH
1-2 to 3, 1-39, 1-51, 1-59
BREAKER BAR
1-1, 1-7, 1-14, 1-21, 1-54
CHAIN WRENCH
1-39 to 40
CLICK TYPE
1-58
COMBINATION
1-1, 1-3 to 8, 1-23 to 24
COMBINATION WRENCH
1-1, 1-3 to 9,
1-23 to 24, 1-35, 1-41
COUPLER
1-61
CROWFOOT
1-12, 1-21, 1-59
CYLINDER HEAD TOOL
1-1, 1-3, 1-17,
1-24
DEGREE WHEEL
1-60
DIAL TYPE
1-23, 1-58 to 59
DRIVER
1-59
DUAL WHEEL
1-8, 1-18, 1-21, 1-62
ELECTRIC
1-61
ELECTRICAL
1-65
ELECTRONIC
1-61
EXTENSION
1-2 to 3, 1-8, 1-21,
1-51, 1-59, 1-62
FERRULE
1-3, 1-41
FILTER
1-40
FRAME & HITCH TOOL
1-24, 1-35, 1-39
FUEL SYSTEM TOOL
1-43
GAUGE
1-12, 1-61
GLOW PLUG
1-17
GOVERNOR TOOL
1-43
HAND IMPACT
1-65
HAND TOOL
1-1, 1-3 to 15, 1-17 to 25,
1-27, 1-29 to 30, 1-32 to 36,
1-38 to 39, 1-41 to 44, 1-50 to 51,
1-54, 1-59, 1-64, 1-66 to 68, 1-80
HANDLE
1-15, 1-21 to 22, 1-38
HEX BIT SET
1-3, 1-42
HEX KEY WRENCH
1-41
HEX WRENCH DISPLAY
1-31
HOLLOW HEAD
1-43
HOSE
1-61
HOSE ASSEMBLY TOOL
1-39
HYDRAULIC
1-63 to 65
HYDRAULIC CYLINDER
1-40
HYDROSTAT
1-41
IMPACT
1-66 to 68
IMPACT SOCKET
1-14, 1-18 to 19,
1-30, 1-33, 1-65 to 68
IMPACT TOOL
1-65
INDICATOR
1-12
INJECTION LINE
1-3, 1-41
INJECTION PUMP
1-15
INSTALLATION TOOL
1-44
JAW
1-39
KIT
1-10, 1-15, 1-20 to 21, 1-27
LOCKNUT
1-43
MAIN BEARING
1-59
MAIN CAP
1-59
METRIC
1-15, 1-43
METRIC SOCKET 1-3, 1-8, 1-35 to 36, 1-42
MOTOR GRADER
SERVICE TOOL
1-58 to 59
MOUNTING BRACKET
1-61
MULTIPLIER
1-34, 1-60 to 61
NIPPLE
1-61
OFFSET WRENCH
1-41
OPEN END WRENCH 1-12, 1-25, 1-36, 1-41
PIPE WRENCH
1-50 to 51
PNEUMATIC
1-62
POWER TRAIN TOOL
1-8, 1-18 to 19,
1-21, 1-34, 1-59, 1-61 to 62
PRY BAR
1-1, 1-7, 1-14, 1-21
PUMP
1-41, 1-65
RATCHET
1-14 to 15, 1-20 to 21, 1-24,
1-36 to 38
REGULATOR
1-61
REMOVAL
1-10, 1-27
REPAIR
1-66 to 68
REPAIR KIT
1-15, 1-20 to 21, 1-58,
1-63 to 64
REPAIR PART 1-12, 1-15, 1-20 to 21, 1-43
REVERSING
1-14, 1-20 to 21
RIM
1-19, 1-62
SCREW
1-43
SEAL KIT
1-63
SERVICE KIT
1-58
SERVICEMANS HAND TOOL
1-1, 1-3,
1-7 to 9, 1-12, 1-14 to 15, 1-18,
1-20 to 25, 1-35 to 36, 1-38 to 39, 1-41,
1-43 to 44, 1-50 to 51, 1-54, 1-65
SLEEVE METERING TOOL
1-43
SOCKET
1-3 to 7, 1-9 to 15, 1-17 to 19,
1-27, 1-29 to 30, 1-32 to 34,
1-43 to 44, 1-62, 1-66 to 68, 1-80
SOCKET WRENCH
1-33, 1-43
SPANNER
1-40
SPANNER WRENCH
1-40
SPARK PLUG SOCKET
1-44
SPECIALTY
1-41
STEERING
1-36
STRAP WRENCH
1-4 to 9, 1-40, 1-54
STRUT
1-34, 1-61 to 62
SUSPENSION
1-24, 1-35, 1-39
TAP
2-32, 2-36
TAPPET WRENCH
1-1, 1-3, 1-24
TESTER
1-61
THREAD
1-39
TOOL
1-4 to 9, 1-40, 1-54, 1-59
TOOL SET
1-1, 1-3, 1-7 to 8, 1-12,
1-14 to 15, 1-20 to 25, 1-35 to 36,
1-38 to 39, 1-41, 1-43 to 44, 1-65
TOOL STORAGE
1-23
TORQUE
1-2 to 3, 1-8, 1-18 to 19, 1-21,
1-23, 1-34, 1-51, 1-58 to 65
TORQUE CONTROL TOOL
1-43
TORQUING TOOL
1-59
TORX
1-9, 1-43
TUBE WRENCH
1-3, 1-41, 1-59
TUBULAR ARM
1-59
VALVE
1-1, 1-3, 1-24
VISE
1-2 to 3, 1-51
WHEEL & TIRE
1-8, 1-18 to 19,
1-21, 1-34, 1-61 to 62
WHEEL BEARING
1-43
WHEEL NUT
1-34, 1-61 to 62
nomen.qxd
9/15/06
2:17 PM
Page 16
part no.qxd
9/20/06
11:08 AM
Page 1
3-38
3-38
3-19
3-19
3-8
3-8
1-36
1-36
1-53
3-21
3-21
3-21
3-21
3-22
3-22
3-22
3-22
3-22
3-22
3-22
3-21
3-21
3-22
3-22
3-22
3-12
1-31
1-31
3-22
3-22
3-22
3-14
3-34
1-64
1-64
1-64
1-64
1-64
1-64
1-64
1-63
1-63
1-63
1-63
1-63
part no.qxd
9/20/06
11:08 AM
Page 2
3-21
2-107
1-45
1-1, 1-7,
1-8, 1-14, 1-21
Detach Ratchet
1-58
Probe, Holder
2-112
First Aid Kit 25 Person
2-79
First Aid Kit - 50 Person
2-79
Hose Assembly
1-8
Link Brackets, 36 mm
1-88
Spanner Wrench
1-8
Tool Chain
1-8
Bristle Disc
2-12
Bristle Disc
2-12
Bristle Disc
2-12
Radius Punch, 154 mm
1-53
Transmission/Drive Train Oil, 10W 3-17
Polycarbonate Primer
3-8
ABS Primer
3-8
Natural Gas Engine Oil, 40
3-16
Breaker Bar
1/2 inch drive
1-1, 1-3, 1-12, 1-20
Impact Socket - Standard length 1-19
Metric Hex Driver, 3/4 in
1-31
3-9
Seal Installation Kit
Replacement Bit
1-31
Seal Lubricant (1 gal)
3-9
Seal Cleaner (1 gal)
3-9
Quick Cure Primer
3-1, 3-5
Clear Bottle
2-112, 2-113, 2-114
Bottle Assembly
2-112, 2-113, 2-114
Bottle Group
2-112, 2-113, 2-114
Sorbent Spill Kit - 5 gal
2-101
Sorbent Spill Kit, 31 gal
2-101
2-111
Poly Creeper
Multi-Purpose Tractor Oil, 10W-30 3-18
Sealant Repair Kit
3-1
Hard Hat
2-89
Hard Hat
2-89
Charcoal Gray Paint, 12 oz Aerosol 3-38
Cat Cabinet & Tank Liquid
for Pressure Washers
3-10
Cat Cabinet and Tank Liquid
for Pressure Washers
3-10
Cat Cabinet and Tank Powder
3-10
Cat Cabinet and Tank Powder
3-10
Cat Pressure Wash
3-10
Cat Pressure Wash
3-10
Cat GP Wash
3-11
Cat GP Wash
3-11
Cat Citra Soap
3-11
Cut-Off Wheel, A60
2-20
Cut-Off Wheel, A60
2-20
Cut-Off Wheel, A36
2-20
Cut-Off Wheel, A36
2-20
Cut-Off Wheel, A36
2-20
Cutting Wheel, A36
2-20
Cut-Off Wheel, A60
2-20
Cut-Off Wheel, A60
2-20
Cut-Off Wheel, A36
2-20
Cut-Off Wheel, A36
2-20
Cut-Off Wheel, A36
2-20
Cut-Off Wheel, A36
2-20
Internal Slotted Final Drive
1-40
Spanner Wrench
1-82
Six-Drawer Tool Chest, Black
1-82
Lock
Activator, 250 ml Tube
3-8
Fast Cure Window Adhesive
& Booster 10.5 oz Tube
3-8
Heating Oven
3-8
Automotive Battery
2-65
Racing Battery
for Off-Highway Vehicles
2-65
part no.qxd
9/20/06
11:08 AM
Page 3
part no.qxd
9/20/06
11:08 AM
Page 4
Socket, 10 mm
1-26, 1-32
Socket, 11 mm
1-26, 1-32
Socket, 12 mm
1-26, 1-32
Socket, 13 mm
1-26, 1-32
Socket, 14 mm
1-26, 1-32
TORXALIGN Bit, T10, 1/4
1-16
TORXALIGN Bit, T15, 1/4
1-16
TORXALIGN Bit, T20, 1/4
1-16
TORXALIGN Bit, T25, 1/4
1-16
TORXALIGN Bit, T30, 3/8
1-6, 1-16
TORXALIGN Bit, T40, 3/8
1-16
TORXALIGN Bit, T45, 3/8
1-16
TORXALIGN Bit, T50, 3/8
1-6, 1-16
TORXALIGN Bit, T55, 3/8
1-16
1/4 in Sq. Drive Torx Socket
1-16
Hex Driver, 4 mm (3/8 in) Drive
1-31
Hex Driver, 5 mm (3/8 in) Drive
1-31
Hex Driver, 6 mm (3/8 in) Drive
1-31
Hex Driver, 7 mm (3/8 in)
1-31
Driver, Hex, 8 mm, 3/8
1-31
Driver, Hex, 10 mm, 3/8" Drive
1-31
Driver, Hex, 12 mm, 1/2" Drive
1-31
Driver, Hex, 14 mm, 1/2" Drive
1-31
Driver, Hex, 17 mm, 1/2" Drive
1-31
Hacksaw
1-45
Rolling Head Pry Bar,
304.8 mm (12 in)
1-46
Rolling Head Pry Bar,
533.4 mm (21 in)
1-46
Standard Length Sockets,
1/2 in Drive, 12 Pt., 25 mm
1-33
Standard Length Sockets,
1/2 in Drive, 12 Pt., 26 mm
1-33
Grease Gun Group with 1 battery 1-57
1-57
Rechargeable Battery
Standard Length Sockets,
1/2 in Drive, 12 Pt., 27 mm
1-33
Standard Length Sockets,
1/2 in Drive, 12 Pt., 28 mm
1-33
Standard Length Sockets,
1/2 in Drive, 12 Pt., 29 mm
1-33
Standard Length Sockets,
1/2 in Drive, 12 Pt., 30 mm 1-6, 1-9, 1-33
Standard Length Sockets,
1/2 in Drive, 12 Pt., 31 mm
1-33
Standard Length Sockets,
1/2 in Drive, 12 Pt., 32 mm
1-33
Socket Set, 12 Piece,
3/8 in Drive
1-3, 1-8, 1-26
Socket Set, 10 Piece
1-3, 1-29
Socket Set, 9 Piece,
1/4 in Drive
1-3, 1-26
TORXr Driver Set, 10 Piece
1-3, 1-16
Metric Hex Driver Set,
9 Piece
1-3, 1-8, 1-31
Ratchet, 1/2 in Drive
1-20
Pneumatic Wrench
1-62
Pneumatic Wrench Group
1-62
Wrench Group Pneumatic
1-62
Wrench Group Pneumatic
1-62
Regulator Group
1-62
Reaction Arm
1-62
Snap Ring Kit
1-62
Snap Ring Kit
1-62
Hose Assembly
1-62
Cage Assembly
1-62
Filter Assembly
1-62
Gauge Pressure
1-62
Wrench Assembly
1-62
Wrench Assembly
1-62
1-54
Hydraulic Cylinder Seal Pick
Reaction Arm
1-62
Cat Backhoe Loader Axle/Brake
Oil Additive
3-20
Service Group (Forwarder)
1-8
Service Group (Tree Harvester)
1-8
Saw Adjustment Wrench
1-8, 1-37
part no.qxd
9/20/06
11:08 AM
Page 5
Tool Bag
1-4, 1-5
1-4
Hand Tool Set
1-4
Hand Tool Set
Plexus MA 300 (EAME only)
3-5
End Cut Pliers
1-51
2-90
Hard Hat Attachment Bracket
Face Slotted Spanner Wrench
1-4,
1-5, 1-7
Drain Plug Socket
1-4, 1-5, 1-7, 1-54
Drain Plug Socket
1-54
Combination Pliers
1-4, 1-5, 1-51
Sliding T-Handle 1-4, 1-5, 1-7, 1-22, 1-54
Standard Impact Socket Set,
1-13
11 Piece
Socket, 1/2 in
1-13, 1-18
Socket, 9/16 in
1-5, 1-13, 1-18
Socket, 5/8 in
1-13, 1-18
Socket, 11/16 in
1-13, 1-18
Socket, 3/4 in
1-13, 1-18
Socket, 13/16 in
1-13, 1-18
Socket, 7/8 in
1-13, 1-18
Socket, 15/16 in
1-13, 1-18
Socket, 1 in
1-13, 1-18
Socket, 1 1/16 in
1-13, 1-18
Socket, 1 1/8 in
1-13, 1-18
1-13
Impact Socket Set, 12 Piece
Socket, 7/16 in
1-13, 1-18
Socket, 1/2 in
1-13, 1-18
Socket, 9/16 in
1-13, 1-18
Socket, 5/8 in
1-13, 1-18
Socket, 11/16 in
1-13, 1-18
Socket, 3/4 in
1-13, 1-18
Socket, 13/16 in
1-13, 1-18
Socket, 7/8 in
1-13, 1-18
Socket, 15/16 in
1-13, 1-18
Socket, 1 in
1-13, 1-18
Socket, 1 1/16 in
1-13, 1-18
Socket, 1 1/8 in
1-13, 1-18
Adapter
1-9, 1-22
1-9
Socket Set, 17 Piece, 1/4 in
Impact Socket Set, 12 Piece, 1/2 in 1-29
Impact Socket, 1/2 in Drive
1-29, 1-33
Impact Socket, 1/2 in Drive 1-5, 1-6, 1-9,
1-29, 1-33
Impact Socket, 1/2 in Drive
1-6, 1-9,
1-29, 1-33
Impact Socket, 1/2 in Drive 1-29, 1-33
Impact Socket, 1/2 in Drive 1-5, 1-6, 1-9,
1-29, 1-33
Impact Socket, 1/2 in Drive 1-29, 1-33
Impact Socket, 1/2 in Drive 1-29, 1-33
Impact Socket, 1/2 in Drive
1-5, 1-29,
1-33
Impact Socket, 1/2 in Drive 1-29, 1-33
Impact Socket, 1/2 in Drive
1-5, 1-29,
1-33
Impact Socket, 1/2 in Drive
1-5, 1-29,
1-33
Impact Socket, 1/2 in Drive 1-29, 1-33
Socket Set, 10 Piece,
1-10
1/4 in Drive
Socket, 1/4 in Drive
1-10, 1-17
Socket, 1/4 in Drive
1-10, 1-17
Socket, 1/4 in Drive
1-10, 1-17
Socket, 1/4 in Drive
1-10, 1-17
Socket, 1/4 in Drive
1-10, 1-17
Socket, 1/4 in Drive
1-10, 1-17
Socket, 1/4 in Drive
1-10, 1-17
Socket, 1/4 in Drive
1-10, 1-17
Socket, 1/4 in Drive
1-10, 1-17
Socket, 1/4 in Drive
1-10, 1-17
Socket Set, 7 Piece,
1-10
3/8 in Drive
Socket, 3/8 in Drive
1-10, 1-17
Socket, 3/8 in Drive
1-10, 1-17
Socket, 3/8 in Drive
1-10, 1-17
Socket, 3/8 in Drive
1-10, 1-17
214-1148
214-1149
214-1150
214-1151
214-1152
214-1153
214-1154
214-1155
214-1156
214-1157
214-1158
214-1159
214-1160
214-1161
214-1162
214-1163
214-1164
214-1165
214-1166
214-1167
214-1168
214-1169
214-1170
214-1171
214-1172
214-3634
214-3635
214-4820
214-4824
214-6142
214-6144
214-6145
214-6146
214-6147
214-6148
214-6149
214-6153
214-6490
214-6491
214-6492
214-6493
214-6494
214-6495
214-6496
214-6497
214-6498
214-6500
214-6501
214-6503
214-6504
214-6506
214-6507
214-6509
214-6510
214-6511
214-6512
214-6513
214-6514
part no.qxd
9/20/06
11:08 AM
Page 6
223-0003
223-0004
223-1154
223-1693
223-1694
223-1695
223-1697
223-1698
223-3832
223-3833
223-3834
223-3835
223-3836
223-3837
223-4352
223-4353
223-4354
223-4355
223-4356
223-4357
223-4358
223-4359
223-9116
224-0851
224-0853
224-5758
224-8665
224-8666
224-8667
225-5082
225-5083
225-5084
225-5085
225-6502
226-0102
226-0124
226-0125
226-0126
226-1900
226-1901
226-1902
226-1903
226-1904
226-1905
226-1906
226-1907
226-6624
227-3129
227-3130
227-3131
227-3132
227-3133
227-3134
227-3795
227-3796
227-3797
227-3798
227-3799
227-3800
227-4383
227-4384
227-4385
227-4386
227-4387
227-4388
227-4389
227-4390
227-4391
227-4392
227-4393
part no.qxd
9/20/06
11:08 AM
Page 7
233-9689
233-9690
233-9712
233-9731
233-9732
233-9733
233-9734
233-9735
233-9736
233-9737
233-9738
233-9740
233-9741
233-9743
233-9745
233-9746
233-9747
233-9797
233-9798
233-9799
234-0544
234-0545
234-4323
234-4324
234-4325
234-4326
234-4327
234-4328
234-4329
234-6041
235-0844
235-0845
235-0847
235-0848
235-0849
235-0850
235-0853
235-0859
235-0865
235-0866
235-0867
235-0868
235-0869
235-0870
235-0871
235-0872
235-6479
235-8598
236-1169
236-2646
236-2647
236-2648
236-2654
2-56
2-56
1-84
1-84
1-84
1-84
1-84
2-82
2-82
2-20
2-14
2-14
2-14
2-14
2-14
2-14
2-14
2-14
2-14
2-14
2-14
2-14
2-14
2-14
2-14
2-14
2-14
2-14
2-20
2-20
2-20
2-20
2-12
2-17
2-17
2-13
2-13
2-13
2-13
2-13
2-13
2-13
2-13
part no.qxd
9/20/06
11:08 AM
Page 8
243-5182
243-5183
243-5184
243-5185
243-5186
243-5187
243-5188
243-5189
243-5190
243-5450
243-5451
243-5458
243-5459
243-6495
243-6496
244-0910
245-3224
245-5836
245-9823
245-9965
246-0436
246-0437
246-0438
246-0439
246-0440
246-0441
246-0442
246-0443
246-5128
246-5129
246-5131
246-5132
246-5133
246-5134
246-5141
246-5142
246-5143
246-5144
246-5145
246-5146
246-5147
246-5148
246-5149
246-5150
246-5151
246-5152
246-5153
246-5154
246-5155
246-5156
246-5157
246-5158
246-5159
246-5160
246-5161
246-5162
246-5163
246-5164
246-5165
246-5166
part no.qxd
9/20/06
11:08 AM
Page 9
Fleeced Gloves, Lg
2-94
Fleeced Gloves, Lg, Bulk-12 Pair 2-94
Reversible Gloves, 12 Pair per Pkg 2-94
Disposable Nitrile Gloves,
Powdered, Lg
2-96
Disposable Nitrile Gloves,
Powder-Free, Lg
2-96
Disposable Latex Gloves, Lg
2-96
Backing Pad
1-69
Threaded Insert Kit, Metric, M6-1 2-42
Threaded Insert Kit, Metric,
M8-1.25
2-42
Threaded Insert Kit, Metric,
M10-1.5
2-42
Threaded Insert Kit, Metric,
M10-1.25
2-42
Threaded Insert Kit, Metric,
M12-1.75
2-42
Threaded Insert Kit, Metric, M16-2 2-42
Threaded Insert Kit, Metric,
M20-2.5
2-42
Threaded Insert Kit, Metric, M24-3 2-42
Threaded Insert Replace Kit,
Metric, M6-1
2-42
Threaded Insert Replace Kit,
Metric, M8-1.25
2-42
Threaded Insert Replace Kit,
Metric, M10-1.5
2-42
Threaded Insert Replace Kit,
Metric, M10-1.25
2-42
Threaded Insert Replace Kit,
Metric, M12-1.75
2-42
Threaded Insert Replace Kit,
Metric, M16-2
2-42
Threaded Insert Replace Kit,
Metric, M20-2.5
2-42
Threaded Insert Replace Kit,
Metric, M24-3
2-42
Organizing Foam
1-80
Organizing Foam
1-80
Socket, 13/16 in
1-14
Socket, 7/8 in
1-14
Socket, 15/16 in
1-14
Socket, 1 in
1-14
Socket, 1 1/16 in
1-14
Socket, 1 1/8 in
1-14
Socket, 1 3/16 in
1-14
Socket, 1 1/4 in
1-14
Socket, 1 5/16 in
1-14
1-14
Universal Impact Socket Set
10 mm Socket
1-30
11 mm Socket
1-30
12 mm Socket
1-30
13 mm Socket
1-30
14 mm Socket
1-30
15 mm Socket
1-30
16 mm Socket
1-30
17 mm Socket
1-30
18 mm Socket
1-30
19 mm Socket
1-30
Metric Universal Impact Socket Set 1-30
1-16
Hex Ball Driver Socket Set
Hex Head Bolt, 1/4-20 x 1/2 in,
2-128
Hex Head Bolt, 1/4-20 x 3/4 in
2-128
Hex Head Bolt, 1/4-20 x 1 in
2-128
Hex Head Bolt, 1/4-20 x 1 1/4 in
2-128
Hex Head Bolt, 1/4-20 x 1 1/2 in
2-128
Hex Head Bolt, 1/4-20 x 1 3/4 in
2-128
Hex Head Bolt, 1/4-20 x 2 in
2-128
Hex Head Bolt, 1/4-20 x 2 1/4 in
2-128
Hex Head Bolt, 1/4-20 x 2 1/2 in
2-128
Hex Head Bolt, 1/4-20 x 2 3/4 in
2-128
Hex Head Bolt, 1/4-20 x 3 in
2-128
Hard Washer, 1/4 in
2-128
Lock Washer 1/4 in
2-128
Full Nut, 1/4-20
2-128
Hex Head Bolt, 5/16-18 x 1/2 in
2-128
247-0203
247-0204
247-0205
247-0206
247-0207
247-0208
247-0209
247-0210
247-0211
247-0212
247-0213
247-0214
247-0215
247-0216
247-0217
247-0218
247-0219
247-0220
247-0221
247-0222
247-0223
247-0224
247-0225
247-0226
247-0227
247-0228
247-0229
247-0230
247-0231
247-0232
247-0233
247-0234
247-0235
247-0236
247-0237
247-0238
247-0239
247-0240
247-0241
247-0242
247-0243
247-0244
247-0245
247-0246
247-0247
247-0248
247-0249
247-0250
247-0251
247-0252
247-0253
247-0254
247-0255
247-0256
247-0583
247-0584
247-0585
247-0586
247-0587
247-0588
247-0589
247-0590
247-0591
247-0592
247-0593
247-0594
247-0595
247-0596
247-0597
247-0598
247-0599
247-0600
247-0601
247-0602
247-0603
247-0604
247-0605
2-128
2-128
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
247-0606
247-0607
247-0608
247-0609
247-0610
247-0611
247-0612
247-0613
247-0614
247-0615
247-0616
247-0617
247-0618
247-0619
247-0620
247-0621
247-0622
247-0623
247-0624
247-0625
247-0626
247-0627
247-0698
247-0699
247-0700
247-0701
247-0702
247-0703
247-0717
247-0718
247-0719
247-0720
247-0721
247-0749
247-0750
247-0751
247-0752
247-0753
247-0754
247-0755
247-0762
247-0763
247-0764
247-4447
247-4449
247-4450
247-6410
247-6412
247-6413
247-9662
247-9663
248-2283
248-7518
248-7519
248-7520
248-7521
248-7522
248-8810
248-8811
248-8812
248-8813
248-8814
248-8815
248-8816
248-8817
248-8818
248-8819
248-8820
part no.qxd
9/20/06
11:08 AM
Page 10
Ratcheting Wrench, 9 mm
1-36
Ratcheting Wrench, 10 mm
1-36
Ratcheting Wrench, 11 mm
1-36
Ratcheting Wrench, 12 mm
1-36
Ratcheting Wrench, 13 mm
1-36
Ratcheting Wrench, 14 mm
1-36
Ratcheting Wrench, 15 mm
1-36
Ratcheting Wrench, 16 mm
1-36
Ratcheting Wrench, 17 mm
1-36
Ratcheting Wrench, 18 mm
1-36
Ratcheting Wrench, 19 mm
1-36
Clear Acetate Visor
2-90
Power Module White Paint High
Gloss Water Reducible 2.8 VOC
3-39
Power Module White Paint High
Gloss Water Reducible 2.8 VOC
3-39
Power Module White Paint, High
Gloss 3.5 VOC
3-39
Power Module White Paint, High
Gloss, 5 gal Pail
3-38
Natural Gas Engine Oil, Low Ash,
EL350, 40
3-16
End Wire Brush, 1/4" Shank,
Crimped Wire
2-4
End Wire Brush, 1/4" Shank,
Crimped Wire
2-4
End Wire Brush, 1/4" Shank,
Crimped Wire
2-4
Safety Glasses, Clear
(packaged for industrial)
2-85
Marine Dual Terminal Battery
2-65
Check-a-Thread, in
2-130
Check-a-Thread, mm
2-130
2-105
WypAll X60, 9.1 x 16.8 in
2-102
Small Spill Response Bag
2-102
Small Spill Response Cart
2-103
Large Spill Response Cart
2-103
Small Spill Response Cart
Absorbent Sock,
3 in x 10 ft long
2-98, 2-102, 2-103
Backing Pad, 4.5"
2-12, 2-13
Backing Pad, 5"
2-12, 2-13
Backing Pad, 7"
2-12, 2-13
Flap Brush, 1.5 x 1", coarse, 60 grit 2-5
Flap Brush, 1.5 x 1", medium, 120 grit 2-5
Flap Brush, 1.5 x 1", very fine, 240 grit 2-5
Flap Brush, 3 x 2", coarse, 60 grit
2-5
Flap Brush, 3 x 2", medium, 120 grit 2-5
Flap Brush, 3 x 2", very fine, 240 grit 2-5
Surface Condition Brush, 1.5 x 1",
coarse
2-18
Surface Condition Brush, 1.5 x 1",
medium
2-18
Surface Condition Brush, 1.5 x 1",
very fine
2-18
Surface Condition Brush, 3 x 2",
coarse
2-18
Surface Condition Brush, 3 x 2",
very fine
2-18
Flap Wheel, 1 x 1", 60 grit
2-19
Flap Wheel, 1 x 1", 80 grit
2-19
Flap Wheel, 1 x 1", 120 grit
2-19
Flap Wheel, 1 x 1", 180 grit
2-19
Flap Wheel, 1 x 1", 240 grit
2-19
Flap Wheel, 2 x 1", 60 grit
2-19
Flap Wheel, 2 x 1", 80 grit
2-19
Flap Wheel, 2 x 1", 120 grit
2-19
Flap Wheel, 2 x 1", 180 grit
2-19
Flap Wheel, 2 x 1", 240 grit
2-19
Flap Wheel, 3 x 1", 60 grit
2-19
Flap Wheel, 3 x 1", 80 grit
2-19
Flap Wheel, 3 x 1", 120 grit
2-19
Flap Wheel, 3 x 1", 180 grit
2-19
Flap Wheel, 3 x 1", 240 grit
2-19
Flap Disc
2-6
Type 29 Zirconia Flap Disc
2-6
Type 29 Zirconia Flap Disc
2-6
254-5339
254-5340
254-5341
254-5342
254-5343
254-5344
254-5345
254-5346
254-5347
254-5348
254-5349
254-5350
254-5351
256-4816
256-4879
258-2357
258-5686
259-7005
259-7006
259-7007
259-7008
260-1776
260-1777
260-1778
260-1779
260-1802
260-3764
260-3765
260-3766
260-4783
260-4785
261-0022
261-0024
261-0114
261-0115
261-0443
261-0444
261-0445
261-0446
261-0447
261-0448
261-6665
261-6666
261-6667
261-6668
261-6669
261-6670
261-6671
261-7012
261-7013
261-8322
261-8569
261-8570
261-8571
261-8572
261-8573
261-8574
261-8575
261-8576
261-8577
part no.qxd
9/20/06
11:08 AM
Page 11
2-108
Paper Cup, 8 oz
Waste Receptacle Liner, 15 gal 2-126
Waste Receptacle Liner, 33 gal 2-126
Waste Receptacle Liner, 55 gal 2-126
Rain Jacket, large
2-91
2-124
Poly Coat Paper
2-107
Hard Roll Paper Towels
Rain Pants, XL
2-91
Rain Jacket, XL
2-91
Shelf Ladder, 6 ft
2-127
Shelf Ladder, 8 ft
2-127
Step Ladder, 4 ft
2-127
Step Ladder, 8 ft
2-127
Flex Head Ratchet, 1/2 in Drive
1-20
Hammer Handle, 12 in
1-46
Hammer Handle, 16 in
1-46
Hammer Handle, 18 in
1-46
Hammer Handle, 30 in
1-46
Hammer Handle, 36 in
1-46
Paint and Decal Remover
3-40
Paint and Decal Remover
3-40
Thread Insert Kit, 1-8
1-77
Thread Insert Kit, M24
1-77
Thread Insert Kit, M30
1-77
Thread Insert Kit, M36
1-77
Thread Insert Kit, M20
1-77
Thread Repair Solid Plug Insert Kit 1-77
Crack Repair Kit, General Purpose 1-78
Rough Tap
1-77
Finish Tap
1-77
Rough Tap
1-77
Finish Tap
1-77
Drill Bit, 1 9/16 in
1-77
Rough Tap
1-77
Finish Tap
1-77
Installation Tool
1-77
Thread Insert, M36
1-77
Installation Tool
1-77
Installation Tool
1-77
Thread Insert, M24
1-77
Installation Tool
1-77
Drill Bit, 1 41/64 in
1-77
Thread Insert, 1-8, M30
1-77
Thread Insert, M20
1-77
Solid Plug Insert
1-77
Spotfacer
1-77
Drill Bit, 1 25/64 in
1-77
Drill Fixture
1-77
Drill Bit, 57/64 in
1-77
Rough Tap
1-77
Finish Tap
1-77
Installation Tool
1-77
Magcheck Kit
1-78
Pneumatic Tapping Tool
1-78
Stitch Pin, 6.3 mm (.250 in) length 1-78
Stitch Pin, 9.5 mm (.375 in) length 1-78
Stitch Pin, 15.9 mm (.625 in) length 1-78
Stitch Pin, 25.4 mm (1.00 in) length 1-78
Drill Bit, wire size 7
1-78
Starting Tap
1-78
Bottom Tap
1-78
Piloted Tap
1-78
Drilling Jig
1-78
Stitch Pin, 6.3 mm (.250 in) length 1-78
Stitch Pin, 12.7 mm (.500 in) length 1-78
Stitch Pin, 25.4 mm (1.00 in) length 1-78
Starting Tip
1-78
Bottom Tap
1-78
Piloted Tap
1-78
Drill Bit, letter size L
1-78
Stitch Pin, 6.3 mm (.250 in) length 1-78
Stitch Pin, 9.5 mm (.375 in) length 1-78
Stitich Pin, 12.7 mm (.500 in) length 1-78
Stitch Pin, 19 mm (.750 in) length 1-78
Stitch Pin, 28.6 mm (1.125 in) length 1-78
Finishing Tap, fine
1-78
Bottom Tap, fine
1-78
263-7217
263-7218
263-7219
263-7220
263-7221
263-7222
263-7223
263-7224
263-7225
263-7226
263-7227
263-7228
263-7230
263-7232
263-7233
263-7234
263-7235
263-7236
263-7238
263-7239
263-7240
263-7241
263-7242
263-7243
263-7244
263-7245
263-7246
263-7249
263-7250
263-7251
263-7253
263-7254
263-7255
263-7256
263-7258
263-7259
263-7260
263-9067
263-9069
263-9070
263-9071
263-9072
263-9074
263-9075
263-9076
264-0414
264-4352
264-4353
264-4355
264-4356
264-4357
264-4358
264-4359
264-4360
264-4361
264-4363
264-4364
264-4372
265-2255
265-2256
266-2281
266-2282
266-2283
266-3144
266-3452
266-3736
266-3737
266-8562
266-8563
266-8564
267-6532
267-6535
Spotfacer
1-78
Drill Shop
1-78
Stitich Pin, 15.9 mm (.625 in) length 1-78
Stitch Pin, 22.2 mm (.875 in) length 1-78
Stitich Pin, 34.9 mm (1.375 in) length 1-78
Stitch Pin, 50.8 mm (2.00 in) length 1-78
Rough Tap
1-78
Bottom Tap
1-78
Bottom Tap
1-78
Drill Bit, Letter size 0
1-78
Spotfacer
1-78
Drill Stop
1-78
Lock, 3.2 mm (.125 in) thick
1-78
Drill Bit, wire size 15
1-78
Drill Stop
1-78
Drilling Jig
1-78
Bottom Lock, 2 mm (.080 in) thick 1-78
Surface Lock, 4 mm (.160 in) thick 1-78
Drill Bit Set, 1/8 and 3/16 in
1-78
Drilling Jig
1-78
Drill Stop, 1/8 in
1-78
Drill Stop, 3/16 in
1-78
Bottom Lock, 5 mm (.190 in) thick 1-78
Surface Lock, 9.5 mm (.375 in) thick 1-78
Drill Bit Set, 1/8 and 1/4 in
1-78
Drilling Jig
1-78
Drill Stop, 1/4 in
1-78
Trim-Kut 3 inch Discs
(includes 1/4 in mandrel)
1-78
Drilling Jig
1-78
Drilling Jig
1-78
Large Collet for 263-7190
1-78
Quick Change Tap Adapter
1-78
Rough Tap
1-77
Finish Tap
1-77
Tapping Fluid
1-77
Thread Sealant
1-77
Drill Bit, 21/32 in
1-77
File, Aluminum, 10"
2-27
File, Half Round Bastard, 10"
2-27
File, Mill Bastard, 8"
2-27
File, Round, 8"
2-27
File, Slim Taper, 6"
2-27
File, Mill Bastard, 6"
2-27
File Handle, Wood, files 6-8"
2-27
File Handle, Wood, files 8-10"
2-27
2-27
File Set, 8 piece
Nylon Cleaning Brush
2-4
2-27
Razor Blades, Single Edge
Nylon Cleaning Brush
2-4
3-27
Spray Bottle, Plastic
Nylon Cleaning Brush
2-4
Nylon Cleaning Brush
2-4
Parts Cleaning Brush
2-5
Janitorial Bucket, 35 qt
2-126
Mop Head, Rayon
2-126
Mop Head, Cotton
2-126
Mop Handle
2-126
Nylon Cleaning Brush
2-4
2-105
All-Purpose Wipers, 12 x 13 in
Low Lint Task Wipers, 8 x 8 in 2-106, 3-9
Nylon Cleaning Brush
2-4
Nylon Cleaning Brush
2-4
Nylon Cleaning Brush
2-4
3-5
Epoxy Mixer Cup Kit
2-23
Emery Paper
Impact Wrench, 1/2 in 1-66, 1-67, 1-68
Impact Wrench, 3/8 in 1-66, 1-67, 1-68
Ultra 5Moly Grease, Grade 1,
metal pail, 16 kg
3-21
Ultra 5Moly Grease, Grade 2,
metal pail, 16 kg
3-21
Ultra 5Moly Grease, Grade 1,
tote, 1588 kg
3-21
2-106, 2-107
Manufactured Rags
Manufactured Pop-up Rags,
white
2-106, 2-107
part no.qxd
9/20/06
11:08 AM
Page 12
271-4666
271-4667
271-4668
271-4669
271-4670
271-4671
271-4672
271-4673
271-4674
271-4675
271-4676
271-4677
271-4678
271-4679
271-4680
271-4681
271-4683
271-4684
271-4685
271-4686
271-4687
271-4688
271-4689
271-4690
271-4691
271-4692
271-4693
271-4694
271-4695
271-4696
271-4697
271-4700
271-4722
271-4723
271-4724
272-1208
272-1212
272-1215
272-1218
272-1222
272-1223
272-1224
272-1225
272-1226
272-1227
272-1228
272-1230
272-1233
272-1237
272-1239
272-1240
272-1241
272-1242
272-1243
272-1244
272-1245
272-1246
Impact Socket, 20 mm
1-28, 1-32
Impact Socket, 21 mm
1-28, 1-32
Impact Socket, 22 mm
1-28, 1-32
Impact Socket Set, 12 Piece,
1-11
3/8 in Drive
Impact Socket, 5/16 in
1-11, 1-17
Impact Socket, 3/8 in
1-11, 1-17
Impact Socket, 7/16 in
1-11, 1-17
Impact Socket, 1/2 in
1-11, 1-17
Impact Socket, 9/16 in
1-11, 1-17
Impact Socket, 5/8 in
1-11, 1-17
Impact Socket, 11/16 in
1-11, 1-17
Impact Socket, 3/4 in
1-11, 1-17
Impact Socket, 13/16 in
1-11, 1-17
Impact Socket, 7/8 in
1-11, 1-17
Impact Socket, 15/16 in
1-11, 1-17
Impact Socket, 1 in
1-11, 1-17
Impact Socket Set, 14 Piece,
1-28
3/8 in Drive
Impact Socket, 8 mm
1-28, 1-32
Impact Socket, 9 mm
1-28, 1-32
Impact Socket, 10 mm
1-28, 1-32
Impact Socket, 11 mm
1-28, 1-32
Impact Socket, 12 mm
1-28, 1-32
Impact Socket, 13 mm
1-28, 1-32
Impact Socket, 14 mm
1-28, 1-32
Impact Socket, 15 mm
1-28, 1-32
Impact Socket, 16 mm
1-28, 1-32
Impact Socket, 17 mm
1-28, 1-32
Impact Socket, 18 mm
1-28, 1-32
Impact Socket, 19 mm
1-28, 1-32
Impact Socket, 21 mm
1-28, 1-32
Impact Socket, 24 mm
1-28, 1-32
Wrench Organizer
1-23
Socket Extension, 3 in
1-21
Socket Extension, 1/2 in Drive
1-21
Socket Extension, 11 in
1-21
Slide Sledge Heavy Equipment
Repair Tool w/ 272-1237 Pin Driver,
9 lb, 30 in
1-47
Slide Sledge Heavy Equipment
Repair Tool w/ 272-1237 Pin Driver,
13 lb, 46 in
1-47
Slide Sledge Heavy Equipment
Repair Tool w/ 272-1237 Pin Driver,
14 lb, 30 in
1-47
Slide Sledge Heavy Equipment
Repair Tool w/ 272-1237 Pin Driver,
21 lb, 46 in
1-47
Tie Rod/Ball Joint Separator
3 Tip Set
1-48
Tie Rod/Ball Joint Splitter Adapter 1-48
Tie Rod/Ball Joint Separator Fork,
11/16 in
1-48
Tie Rod/Ball Joint Separator Fork,
15/16 in
1-48
Tie Rod/Ball Joint Separator Fork,
1 1/8 in
1-48
Tie Rod/Ball Joint Separator Fork,
1 7/16 in
1-48
Pin Driver, 1/2 in diameter
1-48
Pin Driver, 7/8 in diameter
1-48
Pin Driver, 1 1/4 in diameter
1-48
Pin Driver, 2 in diameter
1-47, 1-48
Pin Driver, 2 1/2 in diameter
1-48
Pin Driver, 3 in diameter
1-48
Curved Chisel Tip, 1 3/8
1-48
Ripper Tooth Pin Inserter,
3/4 in diameter
1-48
Ripper Tooth Pin Remover,
3/4 in diameter
1-48
Ripper Tooth Pin Inserter,
1/2 in diameter
1-48
Ripper Tooth Pin Remover,
1/2 in diameter
1-48
Ripper Tooth Pin Remover,
3/8 in diameter
1-48
part no.qxd
9/20/06
11:08 AM
Page 13
1-79
1-79
1-79
1-20
2-121
1-42
1-42
2-82
2-61
2-105
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-129
2-128
2-128
2-128
2-128
2-128
2-129
2-129
2-129
2-129
2-129
1-61
2-129
1-41
2-129
2-129
1-65
2-129
part no.qxd
9/20/06
11:08 AM
Page 14
1P-3021
1P-3022
1P-3023
1P-3024
1P-3025
1P-3026
1P-3027
1P-3028
1P-3029
1P-3030
1P-3031
1P-3032
1P-3033
1P-3034
1P-3035
1P-3036
1P-3037
1P-3038
1P-3039
1P-3040
1P-3041
1P-3042
1P-3043
1P-3044
1P-3047
1P-3048
1P-3050
1P-3070
1P-3501
1P-3502
1P-3503
1P-3504
1P-3505
1P-3506
1P-3507
1P-3508
1P-3509
1P-3510
1P-3511
1P-3512
1P-3513
1P-3514
1P-3515
1P-3516
1P-3566
1P-3571
1P-4278
1P-5559
1P-7421
1P-7422
1P-7460
1P-9369
1S-0253
1S-0254
1S-0255
1S-0257
1S-0258
1S-0259
1S-2475
1S-9593
1U-5227
1U-5228
1U-5386
1U-5387
1U-5388
1U-5389
1U-5390
1U-5391
1U-5392
1U-5393
1U-5394
1U-5395
1U-5396
1U-5397
1U-5398
1U-5399
1U-5400
1U-5401
1U-5402
1U-5403
1U-5404
1U-5405
1U-5406
1U-5407
1U-5408
1U-5409
1U-5410
1U-5411
1U-5412
1U-5413
1U-5414
1U-5432
1U-5490
1U-5512
1U-5513
1U-5514
1U-5515
1U-5516
1U-5517
1U-5518
1U-5519
1U-5520
1U-5536
1U-5545
1U-5546
1U-5547
1U-5548
1U-5549
1U-5566
1U-5567
1U-5568
1U-5569
1U-5570
1U-5571
1U-5572
1U-5573
1U-5574
1U-5575
1U-5576
1U-5577
1U-5586
1U-5587
1U-5588
1U-5589
part no.qxd
9/20/06
11:08 AM
Page 15
2-28
2-28
2-28
2-28
2-28
2-28
2-28
2-28
2-28
2-28
2-28
2-28
2-28
2-28, 2-41
2-28
2-28
2-28, 2-42
2-28, 2-41
2-28
2-28
2-28, 2-42
2-28, 2-41
2-28
2-28
2-28, 2-42
2-28, 2-41
2-28
2-28
2-29
2-29
2-29
2-29
2-29
2-29
2-29
2-29
2-29
2-29
2-29, 2-38, 2-39
2-29
2-29
2-29, 2-39
2-29, 2-38
2-29, 2-39
2-29
2-29
2-29, 2-38, 2-39
2-29
2-29
2-29
2-29, 2-38
2-29, 2-39
2-29
2-29
2-29, 2-38
2-29, 2-39
2-29
2-29
2-28, 2-38, 2-41
2-28, 2-39
2-28, 2-38
2-28
2-28, 2-38, 2-39, 2-41
2-28
2-28, 2-39
2-28
2-28, 2-38, 2-41
2-28, 2-39
2-28
2-28
2-28, 2-38
2-28
2-28, 2-41
2-28
2-28, 2-38
2-28, 2-42
2-28, 2-41
1U-5701
1U-5702
1U-5703
1U-5704
1U-5705
1U-5706
1U-5707
1U-5709
1U-5710
1U-5711
1U-5713
1U-5714
1U-5715
1U-5718
1U-5719
1U-5732
1U-5733
1U-5734
1U-5735
1U-5748
1U-5809
1U-5889
1U-5890
1U-5891
1U-5892
1U-5893
1U-6128
1U-6132
1U-6136
1U-6140
1U-6142
1U-6151
1U-6152
1U-6156
1U-6221
1U-6222
1U-6225
1U-6395
1U-6396
1U-6444
1U-6516
1U-6517
1U-6520
1U-6523
1U-6526
1U-6539
1U-6540
1U-6586
1U-6587
1U-6600
1U-6689
1U-6690
1U-6691
1U-6692
1U-6699
1U-6700
1U-6705
1U-6706
1U-6707
1U-6708
1U-6709
1U-6710
1U-6725
1U-6726
1U-6728
1U-6780
1U-6781
1U-6782
1U-6783
1U-6784
1U-6786
1U-6787
1U-6788
1U-6789
1U-6790
1U-6791
1U-6792
1U-6793
1U-6794
1U-6795
1U-6796
1U-6809
1U-6810
1U-6811
1U-6812
1U-6813
1U-6814
1U-6815
1U-6816
1U-6817
1U-6818
1U-6819
1U-6820
1U-6821
1U-6822
1U-6823
1U-6824
1U-6825
1U-6826
1U-6827
1U-6828
1U-6829
1U-6830
1U-6831
1U-6832
1U-6833
1U-6834
1U-6835
1U-6836
1U-6837
1U-6838
1U-6839
1U-6840
1U-6841
Masking Tape, 3 in
2-116
Buttress Tap, 1.375"
2-35
Buttress Tap, 1.750"
2-35
External Tip Set
1-52
Bench and Pedestal Wheel,
Type 1, A36
2-21
Bench and Pedestal Wheel,
Type 1, A60
2-21
Bench and Pedestal Wheel,
Type 1, A36
2-21
Bench and Pedestal Wheel,
Type 1, A60
2-21
Bench and Pedestal Wheel,
Type 1, A36
2-21
Bench and Pedestal Wheel,
Type 1, A36
2-21
Bench and Pedestal Wheel,
Type 1, A60
2-21
Raised Hub Wheel,
Type 27, Std., A24
2-19
Raised Hub Wheel
2-19
Raised Hub Wheel,
Type 27, Std., A24
2-19
Raised Hub Wheel,
Type 27, Std., A24
2-19
Raised Hub Wheel,
Type 27, Std., A24
2-19
Raised Hub Wheel,
Type 27, Std., A24
2-19
Raised Hub Wheel,
Type 27, Std., A24
2-19
Raised Hub Wheel,
Type 27, Std., A24
2-19
Raised Hub Wheel,
Type 27, Std., A24
2-19
Cut Off Wheel, A36
2-20
Cut Off Wheel, A36
2-20
Cut Off Wheel, A24
2-20
Type 16 Cone
2-26
Type 17 Cone
2-26
Grinding Wheel
2-26
Type 18R Plug
2-26
Type 18R Plug
2-26
Flaring Cup Snagging Wheel,
Type 11, A16
2-22
Flaring Cup Snagging Wheel,
Type 11, A16
2-22
Flaring Cup Snagging Wheel,
Type 11, A16
2-22
Mounted Point,
1/4" Mandrel Dia., A36
2-25
Mounted Point,
1/4" Mandrel Dia., A60
2-25
Replacement Bulb
2-25
Mounted Point,
1/4" Mandrel Dia., A60
2-25
Mounted Point,
1/4" Mandrel Dia., A36
2-25
Mounted Point,
1/4" Mandrel Dia., A60
2-25
Mounted Point,
1/4" Mandrel Dia., A60
2-25
Fiber Disc, 24 Grit
2-12, 2-13
Fiber Disc, 36 Grit
2-12
Fiber Disc, 50 Grit
2-12
Fiber Disc, 60 Grit
2-12
Fiber Disc, 80 Grit
2-12
Fiber Disc, 100 Grit
2-12
Fiber Disc, 120 Grit
2-12
Fiber Disc, 24 Grit
2-12, 2-13
Fiber Disc, 36 Grit
2-12
Fiber Disc, 50 Grit
2-12
Fiber Disc, 60 Grit
2-12
Fiber Disc, 80 Grit
2-12
Fiber Disc, 100 Grit
2-12
Fiber Disc, 120 Grit
2-12
Fiber Disc, 24 Grit
2-12, 2-13
part no.qxd
9/20/06
11:08 AM
Page 16
1U-8141
1U-8142
1U-8143
1U-8144
1U-8145
1U-8146
1U-8147
1U-8148
1U-8149
1U-8150
1U-8151
1U-8152
1U-8153
1U-8154
1U-8155
1U-8156
1U-8157
1U-8158
1U-8159
1U-8160
1U-8161
1U-8162
1U-8163
1U-8164
1U-8165
1U-8166
1U-8167
1U-8168
1U-8169
1U-8170
1U-8171
1U-8172
1U-8173
1U-8174
1U-8177
1U-8184
1U-8190
1U-8194
1U-8201
1U-8209
1U-8221
1U-8222
1U-8223
1U-8224
1U-8225
1U-8226
1U-8227
1U-8228
1U-8229
1U-8230
1U-8231
1U-8232
1U-8233
1U-8234
1U-8235
1U-8236
1U-8237
1U-8238
part no.qxd
9/20/06
11:08 AM
Page 17
1U-8760
1U-8764
1U-8765
1U-8791
1U-8792
1U-8798
1U-8801
1U-8805
1U-8808
1U-8809
1U-8813
1U-8846
1U-9187
1U-9234
1U-9236
1U-9238
1U-9240
1U-9242
1U-9244
1U-9366
1U-9367
1U-9368
1U-9369
1U-9381
1U-9474
1U-9476
1U-9531
1U-9532
1U-9533
1U-9534
1U-9535
1U-9536
1U-9537
1U-9538
1U-9539
1U-9547
1U-9698
1U-9707
1U-9708
1U-9709
1U-9731
1U-9732
1U-9733
1U-9734
1U-9763
1U-9764
1U-9787
1U-9788
1U-9891
1U-9915
1U-9916
1U-9917
1U-9918
1U-9919
1U-9920
1U-9921
1U-9922
1U-9939
1-39
Hose Press Chain Wrench
Drill Bit, 5/8"
2-29
Drill Bit, 3/4"
2-29
Chain Wrench Group,
Hyd. Cylinder
1-40
Chain Wrench Assy, Hyd. Cylinder 1-40
Socket
1-19
Cat 4A Rust Preventive Oil, 1 gal 3-31
Cat 119 Cutting Oil, 1 gal
3-30
Cat 250 Grinding Fluid, 1 gal
3-30
Cat 450 Rust Preventive Oil, 1 gal 3-31
Hydrosolv Defoamant,
DK100 Additive, 1 gal
3-10
Flexible Gasket Maker
3-6
1-76
Ground Fault Circuit Interrupter
Hacksaw Blade Set,
Replacement, Bi-Metal
1-45, 1-76
Hacksaw Blade Set,
Replacement, Bi-Metal
1-45, 1-76
Hacksaw Blade Set,
Replacement, Bi-Metal
1-45, 1-76
Hacksaw Blade Set, Replacement,
High Carbon Steel
1-45, 1-76
Hacksaw Blade Set, Replacement,
High Carbon Steel
1-45, 1-76
Hacksaw Blade Set, Replacement,
High Carbon Steel
1-45, 1-76
Automatic Power Tape,
3/4" Blade Width
1-49
Automatic Power Tape,
1" Blade Width
1-49
Automatic Power Tape,
1" Blade Width
1-49
Steel Tape, 3/8" Blade Width
1-50
Adapter
2-8
Hex Bit Socket (22 mm)
1-31
Hex Bit (22 mm)
1-31
Alkaline Battery, C Size
2-69
Alkaline Battery,
1.5V D (6 Req)
2-68, 2-69
Non-Rechargeable Package
Quantity Alkaline Battery
2-69
Alkaline Battery, 9V
2-69
Alkaline Industrial
AAA Size Battery, 1.5V
2-69
Batteries, Heavy-Duty Industrial
C Size, 1.5V
2-69
Heavy-Duty Industrial D Size, 1.5V 2-69
Heavy-Duty Industrial
AA Size Batteries, 1.5V
2-69
Carbon-Zinc Battery
2-69
Spring Terminal, 6V
2-70
Hydrosolv Descaleant,
Additive, 1 qt
3-10
Plug Tap, 11/8-7-2B
2-32
Spiralock Tap, 11/4-7
2-35
Plug Tap, 13/8-6-2B
2-32
Masking Paper, 3 in
2-116
Masking Paper, 12 in
2-116
Masking Paper, 24 in
2-116
Masking Paper, 36 in
2-116
A/C Vacuum Pump Oil
3-29
A/C Vacuum Pump Oil
3-29
3176 Engine Hone
2-25
3176 Engine Brush
2-4
Hydraulic Oil Additive
3-20, 3-32
Scratch Brush, Curved Handle
1-55
Scratch Brush, Curved Handle
1-55
Scratch Brush, Shoe Handle
1-55
Scratch Brush,
Inspection Stainless
1-55
Parts Cleaning Brush, 11" O.A.L.
1-56
Parts Cleaning Brush, 11" O.A.L.
1-56
1-56
Battery Post Brush
Parts Cleaning Brush, 11" O.A.L.
1-56
End Wire Brush, 1/4" Shank,
Knot Style
2-3
part no.qxd
9/20/06
11:08 AM
Page 18
3B-4615
3B-4617
3B-4618
3B-4621
3B-6352
3B-7012
3B-7722
3D-2824
3E-6640
3E-8326
3E-9420
3E-9421
3E-9422
3E-9478
3E-9707
3E-9708
3E-9709
3E-9712
3E-9713
3E-9715
3E-9838
3E-9840
3E-9841
3E-9842
3E-9844
3E-9848
3E-9849
3E-9900
3E-9901
3E-9902
3F-4479
3J-1907
3J-5390
3J-7354
3K-0360
3K-8460
3K-8782
3L-1850
3L-6521
3M-7045
3P-0659
3P-1535
3P-1536
3P-1537
3P-1549
3P-2044
3P-2210
3P-2213
3P-2230
3P-2240
3S-0459
3S-0460
3S-2093
3S-6252
4B-4845
4B-8586
4B-9365
4C-2959
4C-2960
4C-3015
4C-3016
4C-3119
4C-3238
4C-3302
4C-3304
4C-3335
4C-3336
4C-3337
4C-3338
4C-3339
4C-3340
4C-3341
4C-3342
4C-3343
4C-3344
4C-3345
4C-3346
4C-3347
4C-3348
4C-3349
4C-3350
4C-3351
4C-3352
4C-3353
4C-3354
4C-3355
4C-3356
4C-3357
4C-3358
4C-3359
4C-3360
4C-3361
4C-3362
4C-3363
4C-3364
4C-3365
4C-3366
4C-3367
4C-3368
4C-3369
4C-3370
4C-3371
4C-3372
4C-3373
4C-3374
4C-3375
4C-3376
4C-3377
4C-3378
4C-3379
4C-3380
4C-3381
4C-3382
4C-3383
4C-3384
4C-3385
4C-3602
4C-3722
4C-3723
4C-3724
4C-3725
4C-3741
4C-3742
4C-3743
4C-3744
part no.qxd
9/20/06
11:08 AM
Page 19
4C-4217
4C-4218
4C-4381
4C-4382
4C-4383
4C-4384
4C-4391
4C-4392
4C-4393
4C-4394
4C-4395
4C-4396
4C-4397
4C-4398
4C-4399
4C-4400
4C-4401
4C-4402
4C-4403
4C-4404
4C-4411
4C-4412
4C-4413
4C-4414
4C-4415
4C-4416
4C-4417
4C-4418
4C-4419
4C-4420
4C-4421
4C-4422
4C-4423
4C-4424
4C-4425
4C-4426
4C-4463
4C-4511
4C-4512
4C-4513
4C-4514
4C-4515
4C-4516
4C-4517
4C-4518
4C-4600
4C-4601
4C-4609
4C-4610
4C-4611
4C-4612
4C-4613
4C-4730
4C-4763
4C-4764
4C-4765
4C-4776
4C-4777
4C-4779
4C-4780
4C-4781
4C-4783
4C-4787
Anti-Spatter Compound, 7 fl oz
3-35
Anti-Spatter Compound, 24 fl oz
3-35
Holder #922
2-8, 2-10
Holder #923
2-8, 2-10
Disc, Surface Recond.,
A-Coarse, 2" Dia.
2-7, 2-8
Disc, Surface Recond.,
A-Coarse, 3" Dia.
2-7, 2-8
Jaw Inserts
2-56
Replacement Jaw Inserts
2-56
Replacement Jaw Inserts
2-56
Jaw Inserts
2-56
Jaw Inserts
2-56
Jaw Inserts
2-56
Jaw Inserts
2-56
Jaw Inserts
2-56
Jaw Inserts
2-56
Replacement Pipe Jaw Insert
2-56
Pipe Jaw Inserts
2-56
Pipe Jaw Inserts
2-56
Pipe Jaw Inserts
2-56
Green Replacement Window
2-90
Aircraft Drill, 1/16"
2-30
Aircraft Drill, 3/32"
2-30
Aircraft Drill, 1/8"
2-30
Aircraft Drill, 5/32"
2-30
Aircraft Drill, 3/16"
2-30
Aircraft Drill, 7/32"
2-30
Aircraft Drill, 1/4"
2-30
Aircraft Drill, 9/32"
2-30
Aircraft Drill, 5/16"
2-30
Aircraft Drill, 11/32"
2-30
Aircraft Drill, 3/8"
2-30
Aircraft Drill, 13/32"
2-30
Aircraft Drill, 7/16"
2-30
Aircraft Drill, 15/32"
2-30
Aircraft Drill, 1/2"
2-30
2-30
Extension, Drill
Plastic Divided Utility w/
Hinged Lid Box
1-86
Fuel Line
2-123
Valve Assy
2-123
Hose Adapter
2-123
Plug, Spark
2-123
2-123
Shrinkfast Shrink Gun
Regulator Assy
2-123
Gauge (Pressure)
2-123
U.L. Guard
2-123
Mailer Container Reusable, Tube
2-112, 2-113, 2-114
1-44
Spark Plug Socket
Cooling System Cleaner,
Quick Flush, 1 pt
3-13
Cooling System Cleaner,
Quick Flush, 1 qt
3-13
Cooling System Cleaner,
Quick Flush, 1 gal
3-13
Cooling System Cleaner,
Quick Flush, 5 gal
3-13
Cooling System Cleaner,
Quick Flush, 55 gal
3-13
Eng. Repair Indicator Kit Case
1-85
Disc Holder, 914, 4" Diameter 2-7, 2-8,
2-10
Disc Holder, 914, 4" Diameter 2-7, 2-8,
2-10
Holder, Disc, 914, 4" Diameter
2-10
Handwrapper
2-120
Handwrapper
2-120
Adjustable Stretch Band-it Tool 2-120
2-120
Stretch Band-it Tool
2-120
Stretch Band-it Stand
Plastic Divided Utility w/
Hinged Lid Box
1-86
Plastic Divided Utility w/
Hinged Lid Box
1-86
part no.qxd
9/20/06
11:08 AM
Page 20
4C-5585
4C-5586
4C-5588
4C-5589
4C-5591
4C-5592
4C-5593
4C-5598
4C-5599
4C-5623
4C-5637
4C-5638
4C-5647
4C-5742
4C-5746
4C-5819
4C-5842
4C-5843
4C-5877
4C-5894
4C-5912
4C-6122
4C-6127
4C-6129
4C-6130
4C-6153
4C-6154
4C-6157
4C-6158
4C-6160
4C-6161
4C-6172
4C-6193
4C-6322
4C-6323
4C-6324
4C-6325
4C-6326
4C-6327
4C-6328
4C-6329
4C-6330
4C-6331
4C-6332
4C-6333
4C-6334
4C-6335
4C-6336
4C-6337
part no.qxd
9/20/06
11:08 AM
Page 21
part no.qxd
9/20/06
11:08 AM
Page 22
part no.qxd
9/20/06
11:08 AM
Page 23
4C-9743
4C-9744
4C-9745
4C-9746
4C-9747
4C-9748
4C-9787
4C-9798
4C-9799
4C-9800
4C-9801
4C-9802
4C-9812
4C-9813
4C-9814
4C-9818
4C-9819
4C-9820
4C-9822
4C-9824
4C-9825
4C-9826
4C-9827
4C-9917
4C-9928
4C-9942
4C-9943
4C-9944
4C-9945
4C-9946
4D-0514
4F-4879
4F-5166
4H-0119
4J-4382
4J-7533
4K-0367
4K-1388
4S-7325
4S-7326
4S-7327
5B-3254
5B-9169
5D-1026
5F-4763
5F-4764
5H-2471
5H-4017
5H-4018
5H-4019
5H-4020
5H-4845
5H-4846
5H-4847
5H-4848
5H-8146
5H-8147
5H-8148
5M-2894
5M-6213
5M-6214
5N-5561
5P-0045
5P-0046
5P-0047
5P-0048
5P-0049
5P-0050
5P-0127
Replacement O-ring
1-87
Replacement O-ring
1-87
Replacement O-ring
1-87
Replacement O-ring
1-87
Taper Pipe Tap
2-35
Socket, 55 mm (2-3/16")
1-19
Impact Socket, 1 3/16 in
1-19
1-50
Block Magnet
Multi-Battery Parallel Charger
2-59
Growler Armature Tester
2-60
Cable
2-61
Cable
2-61
Socket Wrench
1-62
Socket Extention (spline drive)1-34, 1-62
Reaction Bar
1-34
1-23
Hex Shank
1-23
Universal Joint
Port Microfiche Read w/
One Lens & 120 VAC Transform 2-110
Transformer, 120 VAC
2-110
Cigarette Adapter, 12 VDC
2-110
Microfiche Reader Carrying Case 2-110
Spare Lamp, 9W, 6V, FKY
2-110
Bifold Microfiche Holder
w/ 30 Slots
2-110
Power with Battery Cable Socket 2-61,
2-63
Heavy-Duty Variable
Speed Drill, 3/8" (10 mm)
1-75
Saw Blade, 6", 18 teeth
1-76
Saw Blade, 6", 14 teeth
1-76
Saw Blade, 9", 5/7 teeth
1-76
Saw Blade, 12", 6 teeth
1-76
Cab Glass Filler Strip Tool Assy
1-54
Pipe-Allen Drive Plugs,1/16-27
2-50
Hex Head Bolt, 3/8-16 x 1/2 in,
bulk
2-129
Pry Bar, Long, 30"
1-46
HeliCoil Insert Inst. G. Pilot
2-40
Pipe-Hex Head Plugs, 1/2-14
2-49
Charging Adapt. Nozzle
Tester Group Seal
2-49
Full Nut, 5/8-11, bulk
2-129
Seal
2-49
Repair Kit
1-20
Repair Kit
1-20
Service Kit Torque Wrench 1-14, 1-21
Nut, Adapter Group, Flywheel
1-39
Pipe-Square Head Plugs, 1/2-14
2-49
Hose Clamp, 16 mm - 27 mm, bulk 2-129
Chest, 6 Drawer
1-83
Crowfoot Prybar, 16" Long 1-2, 1-3, 1-4,
1-5, 1-6, 1-7, 1-8, 1-9, 1-46
Cement - Bond, Seal, Patch
3-4
Cover, 50" line, Hyd. Test G.
2-50
Cover, 75" line, Hyd. Test G.
2-50
Cover, 1.00" line, Hyd. Test G.
2-50
Cover, 1.25" line, Hyd. Test G.
2-50
Cab Glass Seal Installation
Tool Assy
1-54
Handle, Cab Glass Installation Tool 1-54
End, Cab Glass Installation Tool
1-54
Bit, Cab Glass Installation Tool
1-54
HeliCoil Insert Inst. Group Insert 2-40
HeliCoil Insert Inst. Group Nib
2-40
HeliCoil Insert Inst. Group Pilot
2-40
Hard Washer, 3/8 in, bulk
1-61, 2-129
Tire Inflation Plug, 1/4"-18NPT
2-49
Pipe-Hex Head Plugs, 1/8-27
2-49
Silicone Lubricant
3-28
Blocking Cover
2-50
Blocking Cover
2-50
Blocking Cover
2-50
Blocking Cover
2-50
Blocking Cover
2-50
Blocking Cover
2-50
Glow Plug Socket
1-17
part no.qxd
9/20/06
11:08 AM
Page 24
1-90
5P-4153 Sling, Tire, General Purpose
5P-4200 LT Retain. Bolt Socket,
1/4" Dr., Misc.
1-17
5P-4205 Tee Wrench, 5/32"
(Low Idle Adjustment)
1-43
5P-4206 Sleeve Meter. Calibr. TG Wrench 1-43
5P-4238 Rethreading Fractional Die,
Hexagon
2-33, 2-34
5P-4299 Tee Test TG Plug, 13/16"
2-49
1-83
5P-4724 Lock Kit
5P-4773 Adapter, 1/2" Drive,
5/8" 12 Point Box End
1-59
5P-4868 Hose Clamp, 60 mm - 82 mm, bulk 2-129
5P-4996 Hyd. Sys. Pressure Gauge Kit Plug 2-49
5P-5148 Cable Tie
2-124
5P-5195 Offset Wrench
1-36
1-52
5P-5197 Master Pin HD Snap Ring Pliers
1-20
5P-5249 Pin Socket
5P-5289 Artic Engine Oil, Synthetic
3-15
5P-6442 Hose
2-113
5P-6587 Lock Removal Socket, 1/2"
1-44
5P-6588 Lock Removal Socket, 9/16"
1-44
5P-6589 Lock Removal Socket, 3/4"
1-44
5P-7040 Gear Oil, Synthetic, 75W-90
3-20
5P-7252 Hex Bit, 9/64"
1-15
5P-7253 Sleeve Metering Fuel System
Socket Assy
1-15
5P-7254 Double End Flare Nut Wrench,
Ind. Offset
1-41
5P-7255 Double End Flare Nut Wrench,
Ind. Offset
1-41
5P-7256 Double End Flare Nut Wrench,
Ind. Offset
1-41
5P-7260 Deep Lenght Socket,
1-1/8 in, 1/2 in Drive
1-18
5P-7320 Heavy Duty Box Wrench
1-39
5P-7367 Hitch Pin D&A Socket
1-43
5P-7414 A/C Compressor Repair
1-54
TG Seal Pick
5P-7429 Torque Wrench Service Kit
1-58
5P-7443 Ratchet Wrench, 3/8" Sq. Drive
1-20
5P-7444 Repair Kit (20 tooth gear)
1-20
5P-7445 Repair Kit (optional 30 tooth gear) 1-20
5P-7684 Straight Thread O-ring-Allen
Drive Plugs, 1 7/8-12
2-49
5P-7970 Hex Nut, M8 x 1.25, bulk
2-129
5P-8245 Hard Washer, 1/2 in, bulk
2-129
5P-8247 Hard Washer, 5/8 in, bulk
2-129
5P-8347 Hex Head Bolt,
M8 x 1.25, 70 mm, bulk
2-129
5P-8676 Accessory Drive Gear Extension 1-21
5P-8689 Socket Assembly
1-16
5P-8937 Heat Sink Compound, 5 oz
3-27
5P-9210 Heat Sink Compound, 14 oz
3-27
5P-9617 Adapter Reducer
2-113
5P-9709 Surface Recond. Disc,
A-Coarse, 7" Dia.
2-7, 2-8
5P-9718 Disk Holder, 7" Diameter
2-8, 2-10
5S-0003 Full Nut, 5/16-18, bulk
2-129
5S-6076 Socket Extension, 8"
1-15, 1-21, 1-23
5S-6077 Std. Length Socket,
2 3/8", 6 Pt., 1" Drive
1-15, 1-19
5S-6078 Std. Length Socket,
2 1/2", 6 Pt., 1" Drive
1-15, 1-19
5S-6079 Hub Removal Final
Drive Socket
1-15, 1-19
5S-6080 Std. Length Socket,
2 3/4", 6 Pt., 1" Drive
1-15, 1-19
5S-6081 Socket, 3", 1" Drive
1-15, 1-19
5S-6082 Socket, 3 1/8", 1" Drive
1-15, 1-19
5S-6083 Socket, 3 1/4", 1" Drive
1-15, 1-19
5S-6084 Socket, 3 1/2", 1" Drive
1-15, 1-19
5S-6085 Socket, 3 5/8", 1" Drive
1-15, 1-19
5S-6086 Socket, 3 3/4", 1" Drive
1-15, 1-19
5S-6087 Socket, 4", 1" Drive
1-15, 1-19
5S-6088 Sledge Socket Wrench
1-15
5S-6089 Wrench Handle
1-15, 1-21, 1-22
part no.qxd
9/20/06
11:08 AM
Page 25
part no.qxd
9/20/06
11:08 AM
Page 26
8F-5577
8F-5578
8F-9866
8H-0707
8H-8423
8H-8424
8H-8501
8H-8502
8H-8504
8H-8516
8H-8517
8H-8518
8H-8519
8H-8520
8H-8529
8H-8530
8H-8531
8H-8532
8H-8533
8H-8534
8H-8535
8H-8536
8H-8537
8H-8538
8H-8539
8H-8540
8H-8541
8H-8542
8H-8543
8H-8544
8H-8545
8H-8546
8H-8548
8H-8549
8H-8550
8H-8551
8H-8552
8H-8553
8H-8554
8H-8555
8H-8556
8H-8557
8H-8559
8H-8560
8H-8561
8H-8562
8H-8563
8H-8564
part no.qxd
9/20/06
11:08 AM
Page 27
part no.qxd
9/20/06
11:08 AM
Page 28
part no.qxd
9/20/06
11:08 AM
Page 29
9U-5007
9U-5009
9U-5010
9U-5011
9U-5012
9U-5013
9U-5014
9U-5015
9U-5016
9U-5017
9U-5019
9U-5020
9U-5026
9U-5027
9U-5028
9U-5029
9U-5030
9U-5031
9U-5032
9U-5053
9U-5054
9U-5055
9U-5056
9U-5057
9U-5058
9U-5059
9U-5060
9U-5089
9U-5101
9U-5121
9U-5122
9U-5123
9U-5124
9U-5125
9U-5130
9U-5155
9U-5177
9U-5590
9U-5604
9U-5612
9U-5614
9U-5615
9U-5784
9U-5794
9U-5839
9U-5922
9U-5932
9U-6009
9U-6010
9U-6011
9U-6070
9U-6072
9U-6075
9U-6076
9U-6124
9U-6125
9U-6126
9U-6127
9U-6128
9U-6129
9U-6130
9U-6131
9U-6132
9U-6133
9U-6219
9U-6282
9U-6360
9U-6362
9U-6363
9U-6364
9U-6365
9U-6366
9U-6367
9U-6368
9U-6369
9U-6370
9U-6371
9U-6372
9U-6373
9U-6374
9U-6375
9U-6376
9U-6377
9U-6378
9U-6379
9U-6380
9U-6381
9U-6382
9U-6383
9U-6503
9U-6517
9U-6523
9U-6524
9U-6525
9U-6526
9U-6527
9U-6528
9U-6529
9U-6530
9U-6531
9U-6532
9U-6533
9U-6534
9U-6535
9U-6536
Universal Socket, 10 mm
1-28, 1-32
Universal Socket, 12 mm
1-28, 1-32
Universal Socket, 13 mm
1-28, 1-32
Universal Socket, 14 mm
1-28, 1-32
Universal Socket, 15 mm
1-28, 1-32
Universal Socket, 16 mm
1-28, 1-32
Universal Socket, 17 mm
1-28, 1-32
Universal Socket, 18 mm
1-28, 1-32
Universal Socket, 19 mm
1-28, 1-32
Tool Box
1-6, 1-8, 1-9, 1-83
Torque Extension
1-59
Urethane Paint Reducer, 1 gal
3-40
Connector, 15 Amp, 125V AC
2-75
Plug, 15 Amp, 125V AC
2-75
Connector, 15 Amp, 250V AC
2-75
Plug, 15 Amp, 250V AC
2-75
Connector, 20 Amp, 125V AC
2-75
Plug, 20 Amp, 125V AC
2-75
Connector, 20 Amp, 250V AC
2-75
Plug, 20 Amp, 250V AC
2-75
Connector, Heavy-Duty
15 Amp, 125V AC
2-75
Plug, Heavy-Duty 15 Amp, 125V AC 2-75
Connector, Heavy-Duty
20 Amp, 250V AC
2-75
Plug, Heavy-Duty
20 Amp, 250V AC
2-75
Cord Grip Connector,
20 Amp, 125/250V w/ Ins.
2-75
Cord Grip Plug,
20 Amp, 125/250V w/ Ins.
2-75
Connector,
20 Amp, 250V w/ Ins. Cord Grip
2-75
Connector,
20 Amp, 250V w/ Ins. Cord Grip
2-75
Connector,
30 Amp, 125V w/ Ins. Cord Grip
2-75
Plug, 30 Amp, 125V w/ Ins.
Cord Grip
2-75
Connector, 30 Amp, 250V w/
Ins. Cord Grip
2-75
Plug, 30 Amp, 250V w/
Ins. Cord Grip
2-75
Raised Hub Wheel,
Type 27, Std., A24
2-19
Raised Hub Wheel,
Type 27, Hi Perf., Z/A24
2-19
Metric Size Tap, Plug
2-35
1-37
Ratchet Wrench
Impact Socket, Standard
Length 3/4" Drive (17 mm)
1-30, 1-33
Impact Socket, Standard
Length 3/4" Drive (19 mm)
1-30, 1-33
Impact Socket, Standard
Length 3/4 in Drive, (20 mm) 1-30, 1-33
Impact Socket, Standard
Length 3/4" Drive (21 mm)
1-30, 1-33
Impact Socket, Standard
Length 3/4" Drive (22 mm)
1-30, 1-33
Impact Socket, Standard
Length 3/4" Drive (23 mm)
1-30, 1-33
Impact Socket, Standard
Length 3/4" Drive (24 mm)
1-30, 1-33
Impact Socket, Standard
Length 3/4" Drive (26 mm)
1-30, 1-33
Impact Socket, Standard
Length 3/4" Drive (27 mm)
1-30, 1-33
Impact Socket, Standard
Length 3/4" Drive (28 mm)
1-30, 1-33
Impact Socket, Standard
Length 3/4" Drive (30 mm) 1-8, 1-30, 1-33
Impact Socket, Standard
Length 3/4" Drive (31 mm)
1-30, 1-33
Impact Socket, Standard
Length 3/4" Drive (32 mm)
1-30, 1-33
Impact Socket, Standard
Length 3/4" Drive (33 mm) 1-8, 1-30, 1-33
part no.qxd
9/20/06
11:08 AM
Page 30
2-53
2-54
2-54
2-54
2-54
2-54
2-54
2-55
2-55
2-55
2-55
2-55
2-55
2-55
2-55
2-55
2-55
2-55
2-55
2-55
2-55
2-55
2-55
2-53
2-53
2-53
2-53
2-53
2-53
2-53
2-53
2-53
2-53
2-53
2-53
2-53
2-53
2-53
2-53
2-53
2-53
2-55
2-55
2-55
2-55
2-55
2-55
2-55
2-55
2-55
2-55
2-55
2-55
2-52
2-52
part no.qxd
9/20/06
11:08 AM
Page 31
part no.qxd
9/20/06
11:08 AM
Page 32
2007
Cat Shop
Supplies and
Hand Tools
1.800.542.8665 option 4
(USA)
1.800.541.8665 option 4
(Illinois)
1.800.523.8665 option 4
(Canada)
(Geneva Phone)
(Geneva Fax)
www.cat.com
Printed in USA
2006 Caterpillar
(Replaces GECJ0001-01)
CAT, CATERPILLAR their respective logos and Caterpillar Yellow, as well as corporate and product identity used herein,
are trademarks of Caterpillar and may not be used without permission.