TCAS displays on specific pages of the EFIS control panel. If the transponder is in TA only mode, RAs will display as TAs. TCAS ground testing is only permitted. Vertical arrows are only shown when the rate of climb or descent exceeds 500 feet per minute. Amber traffic icons indicate TAs while red icons indicate RAs, and both display irrespective of whether traffic is selected on the EFIS panel. RAs are inhibited at low altitudes and windshear/GPWS alerts take priority over TCAS.
TCAS displays on specific pages of the EFIS control panel. If the transponder is in TA only mode, RAs will display as TAs. TCAS ground testing is only permitted. Vertical arrows are only shown when the rate of climb or descent exceeds 500 feet per minute. Amber traffic icons indicate TAs while red icons indicate RAs, and both display irrespective of whether traffic is selected on the EFIS panel. RAs are inhibited at low altitudes and windshear/GPWS alerts take priority over TCAS.
TCAS displays on specific pages of the EFIS control panel. If the transponder is in TA only mode, RAs will display as TAs. TCAS ground testing is only permitted. Vertical arrows are only shown when the rate of climb or descent exceeds 500 feet per minute. Amber traffic icons indicate TAs while red icons indicate RAs, and both display irrespective of whether traffic is selected on the EFIS panel. RAs are inhibited at low altitudes and windshear/GPWS alerts take priority over TCAS.
TCAS displays on specific pages of the EFIS control panel. If the transponder is in TA only mode, RAs will display as TAs. TCAS ground testing is only permitted. Vertical arrows are only shown when the rate of climb or descent exceeds 500 feet per minute. Amber traffic icons indicate TAs while red icons indicate RAs, and both display irrespective of whether traffic is selected on the EFIS panel. RAs are inhibited at low altitudes and windshear/GPWS alerts take priority over TCAS.
1. On EFIS control panel TCAS displayed on the following pages only:
EXP NAV EXP VOR / ILS MAP EXP MAP 2. If transponder mode selector selected to TA only, RA will be displayed as TA. 3. TCAS test on ground only 4. Vertical arrow only displayed when ROC or ROD is > 500fpm 5. Amber TRAFFIC is for TA displayed on the EHSI irrespective of whether TFC is selected on the EFIS control panel. 6. Red TRAFFIC is for RA displayed on the EHSI irrespective of whether TFC is selected on the EFIS control panel 7.
(Unfilled) OTHER TRAFFIC beyond 6 miles OR beyond 1,200 feet
(White) PROXIMATE TRAFFIC - <6 miles or < 1,200 feet but not expected to cause a TA or RA (Amber) RA approx. 40 seconds
(Red) RA approx. 25 seconds
8. TA SEEK and SCAN - displayed when intruder is approximately 40 secs before intruder aircraft will reach closet point to your aircraft 9. RA displayed when intruder is approximately 25 secs before intruder aircraft will reach closet point to your aircraft 10. INHIBITS r INCREASE DESCENT RAs are inhibited below approx. 1,500 feet RA) r DESCENT RAs are inhibited below approx. 1,100 feet RA r All RAs are inhibited below 1,000 feet RA. (Even if TA/RA selected, TA only mode is enabled and TCAS message displayed will be TA ONLY r All VOICE annunciations are inhibited below 500 feet RA.
11. WINDSHEAR and GPWS has priority over TCAS.
12. No need to alter lateral flight paths if during turns get RA, continue turn. 13. If other traffic has transponder with no altitude reporting, TCAS can issue a TA but not an RA.