Professional Documents
Culture Documents
Gigatribe Router Setup
Gigatribe Router Setup
When you installed Gigatribe it may had told you that you are behind a firewall and
Could not use DIRECT CONNECT. Therefore you are now connected by EASY CONNECT
This will become a problem later. EASY CONNECT
will allow you to have a fully functional
Use of Gigatribe for a month. Then if you do
not rectify the connectivity issue it will ask you
To buy Gigatribe and pay a yearly fee to use
EASY CONNECT. You do not have to do this, but
The solution will require you to access your router
and open a port. If you are Connected directly to the
internet with no router, you should be ok because you
are using DIRECT CONNECT. If not, you need to do this.
This tutorial was made using VISTA. You should be able to figure this out using XP or Wind
YOU WILL NEED TO SET YOUR COMPUTER TO HAVE A STATIC IP ADDRESS.
Clearwire
router login:
192.168.1.254, default user name: admin Make all changes within the Clearwire router itself, do not
change your static I
P address using this example, use the Clearwire configuration by logging into the router. Clearwire
automatically assigns
a static IP. You only need to open the port 3728 for the specific computer that will use Gigatribe.
8. Click once in the SUBNET MASK IP area, it will automatically fill in the
subnet mask
10. Click: OK
11. RESTART YOUR COMPUTER
Once you are logged in to your router you will need to now look for:
PORT FORWARDING
GAMING
372
8
372
8
Help with port forwarding for your specific router can be found here:
http://www.portforward.com/english/routers/port_forwarding/routerindex.h
tm
12.Now you need to create the port rule for GIGATRIBE. So on an empty line
type in the
Name of the program Gigatribe,
for EXTERNAL PORT and INTERNAL PORT
you need to put in
3728
and
TCP
for protocol,
and THE IP ADDRESS YOU
3728
3728