Professional Documents
Culture Documents
5.1 Finite Elements For Linear Beam Theory 1: Structural System
5.1 Finite Elements For Linear Beam Theory 1: Structural System
Structural system:
Exercise:
Set up the global stiffness matrix K and the global load vector p .
5.2
Structural system:
Exercise:
Set up the equation system K v = p (1st order theory).
5.3
Structural system:
The Following displacements (theory 1st order) are given at the end of the
cantilever beam:
wM = 4,98
y = - 0,0241
= 0,0415
(-') = - 0,000139
Exercise:
a) Determine the internal forces acting on the support, with help of the given
displacements. For the calculation use a finite element for a linear calculation.
b) Calculate the acting forces Fz and MxL.
c) How do the internal forces change if instead of a circular hollow section a
I-section would be used?