Professional Documents
Culture Documents
Procedure Qualification Record (PQR)
Procedure Qualification Record (PQR)
PQR NO:
WPS no
Welding process
Type
DATE:
:
:
:
Joint (QW-402)
Joint design
Root spacing
Backing material
:
:
to P.no :
Group no:
Fillet:
Position (QW-405)
Position of groove
Welding progressionPosition of fillet
:
Up:
:
Down:
Preheat (QW-406)
Preheat temperature, Min (c)
Interpass temperature, Max (c)
Preheat maintenance
:
:
:
Page 1 of 3
:
:
:
Gas (QW-408)
Percent composition
Gases
Mixture
Flow rate
Shielding
Trailing
Backing
Other
Electrical characteristics (QW-409)
Current (amp)
Polarity
Heat Input, Max (J/mm)
Tungsten electrode size & type
Mode of metal transfer for GMAW (FCAW)
:
:
:
:
:
Technique (QW-410)
String or Weave bead
Oscillation
Multiple or Single pass (Per side)
Multiple or Single electrodes
Others
:
:
:
:
:
Specimen
no.
Width
(mm)
Thickness
(mm)
Area
(mm)
Ultimate
total load
(KN)
Ultimate
Units
stress
(Mpa)
Type of failure
and location
(parent
metal/weldment)
Remarks
Page 2 of 3
Observation
Result
Toughness tests(QW-170)
Impact values
Specimen
no.
Notch
location
Specimen
size
Test
temperature
Joules
% shear
Type of test
Deposit analysis
Other
:
:
Welders name
Mils(mm)
Drop
weight
break
(Y/N)
Satisfactory (Yes/No)
Acceptable (Yes/No)
Stamp no:
Test conducted by :
Laboratory test reference no:
We certify that the statements in this record are correct and that the welds were prepared, welded and
tested in accordance with the requirements of section IX of the ASME Boiler and pressure Vessel Code.
Prepared by:
Approved by:
Name:
Date:
Signature:
Name:
Date:
Signature:
Page 3 of 3