Professional Documents
Culture Documents
Tubular Wire Products:: Filler Metals For Demand Critical Seismic Applications
Tubular Wire Products:: Filler Metals For Demand Critical Seismic Applications
The following filler metal products have been three lot tested in accordance with AWS D1.8/D1.8M:2009, testing
requirements. The requirements are specific to the diameter and shielding gas (if applicable). Under Section 6 of the
AWS D1.8/D1.8M:2009 Code, these electrodes are commonly referred to as a pre-qualified filler material. And, may
be used by the fabricator without additional testing.
Diameters Tested:
Shielding Gas:
1/16
1/16, 3/32
100% CO2
.045, 1/16
100% CO2
.045, 1/16
1/16
1/16
1/16, 5/64,3/32
100%CO2
N/A
1/16, 3/32
100% CO2
1/16
1/16
Note: For further information please contact Hobart Brothers Technical department at 1-800-532-2618.
03/14/2011