Professional Documents
Culture Documents
1104 Presssure Die-Cast Sump
1104 Presssure Die-Cast Sump
1104 Presssure Die-Cast Sump
1104CElectronic Models
1104C-E44
1104C-E44T
1104C-E44TA
Please Note that this change will also carry over to the 1104D engines
The main points to note are:
1. The position of the filler pipe is 50mm higher at the sump connection (see
diagram below) therefore less susceptible to Leaks
2. The Depth dimension has slightly increased by 3mm (See Drawings below).
3. There is no expected change in noise levels as a result of this introduction.
4. The sump part No. Will change from 3717J321ETC to 3717E301ECT
Before Change
After Change
Before Change
After Change
Before Change
After Change