Professional Documents
Culture Documents
Articulation Compensator Tool (ACT)
Articulation Compensator Tool (ACT)
Articulation Compensator Tool (ACT)
Specification Summary
Base Tool Characteristics
Tool Weight
lbs
Maximum Articulation
1,700
in 6.0
Tool Configuration
Full Articulation
and Compensation
psi
800
psi
7,500
in 59.8
Tool Stroke
in
6.0
in
16.0
Through Hole
in
2.0
ton
270
Tool Joint
Main Body
End Flange
Part No.
Part No.
6-5/8 REG
Torque
Hoist
Tool
Capacity4 Joint
Capacity
(ft-lbs) (tons)
81096
81097
50,000
350
Box/Pin
81247
81248
85,000
662
Box/Box
1 Maximum articulation is defined as the maximum parallel axis offset, and can be varied to suit customer requirements by varying
tool length and articulation angle.
2 Compensated load is the combined weight of all pipe and equipment supported by the tool.
3 Base tool length is representative of a fully collapsed tool. The tool stroke will be added to this length when extended. This does not
include the length of the crossover or saver sub, which is recommended for use with the ACT-3.
4 Tool hoist and torque ratings are based on API Specification 8C, and are valid for any combination of torque and hoist. The rated
capacity does not take into account any limitations that may result from the tool joint connection.
+1 780.784.7099
sales@volantproducts.ca
volantproducts.ca