Professional Documents
Culture Documents
Violi Meccanica Industriale: Treatment and Recovery of Noble Metals
Violi Meccanica Industriale: Treatment and Recovery of Noble Metals
Violi Meccanica Industriale: Treatment and Recovery of Noble Metals
mixing of powders
w w w.violimacchine.it
VM/FMW1 Microwave oven for waste processing
As an alternative to traditional fuel systems called Working Cycle
“incinerators”, characterized by large overall dimensions, high
running costs and onerous operation, it is now possible to use A
Placing residues into
B
Hermetic closure of the
advanced “green” equipment that makes the process simple the resonance chamber
door and start of the
programmed working cycle
and easy
F C
VM/FMW1 is the new furnace developed by Violi srl which uses the prin- Automatic combustion of Cleaning the chamber with
ciple of pyrolysis for the carbonization of organic residues in the complete any residual gas thanks to nitrogen for the removal
automatic trigger system of oxygen present
absence of oxygen, so as to minimize the formation of smoke and emis-
sions of toxic substances and dioxins into the air.
Heat is generated via a microwave system which acts on organic waste
without combustion thanks to the oven chamber’s inert atmosphere. The
process occurs quickly and in perfect safety, constantly monitored by a D Start-up of the
E
PLC that manages each working phase. Washing of smoke magnetron generators for
generated through the two
The full cycle necessary to treat about a 20-25 kg of residues (depend- carbonization of organic
abetment towers residues
ing on volume) takes place in less then three hours, with an energy use of
approximately 6,5 kW/h and a nitrogen consumption of 8-10 l/h.
The process takes place in a controlled atmosphere and releases smoke
at temperatures of 150-180° C, so as not to cause toxic reactions such as
the formation of dioxin. before after
Due to minimal power consumption, operating costs are decidedly low
and the process is highly advantageous compared to traditional combus-
tion systems. In addition, the bureaucratic process necessary to obtain
authorization to use the oven is streamlined and quick.
Violi srl produces a series of manual and automatic crushing mills for
crushing various types of materials for the recovery of precious metal
residues. These are typically used for pulverizing slag and ashes resulting
from carbonization of worked gold residues, of crucibles and refractory
materials, and for the trituration of electronic components and printed
circuit boards; they are available in the version with manual or automatic
unloading of scrap. before after
The process is automatic and continuous: the movement of cast iron balls
inside the rotor crushes the materials. The crushing mills separate and fil-
ter the dust resulting from the process through a stainless steel net, while
metal residues are unloaded manually; for the automatic models this oc-
curs through a nozzle located on the right side of each device by inverting
the direction of rotation of the motor.
The material to be treated is loaded manually, but the cycle can be totally
automatic on request. Also, upon request, soundproof cabins are avail-
able to accommodate the crushing mills noiselessly. Violi’s crushing mills
series complies with the required international standards. Manual crushing mill VM/80P
The VM/MX series of mixers is the ideal solution for mixing powders of
dry materials processed with the Violi crushing mills. Furnace slag, ashes
resulting from carbonization of worked gold residues, powder from cru-
cibles and refractory materials, or from the trituration of electronic com-
ponents and printed circuit boards, once pulverized, are mixed to obtain
homogeneous products ready to be tested or amalgamated with other
components to obtain new compounds.
MX mixer
Inside an AISI 304 stainless steel chamber (316 on request), a system of
discontinuous blades having a double concentric coil mounted on a shaft
with cast iron supports creates a counter-convergent motion of mass ca-
pable of mixing materials of different specific weight and carrying the
product to the discharge nozzle. The process is fast and efficient, and can
also be applied to granular products.
Technical data MX5 MX10 MX20 MX30 MX100 MX150
Capacity 50 lt. 100 lt. 200 lt. 300 lt. 1000 lt. 1500 lt.
The VM/MX mixers may be equipped with optional components like
Power 1,5 kW 2,25 kW 3 KW 4,125 KW 11,25 KW 15,75 KW
electropneumatically controlled exhaust vent, electronic weighing sys-
Power supply 400 V-50 Hz 400 V-50 Hz 400 V-50 Hz 400 V-50 Hz 400 V-50 Hz 400 V-50 Hz
tem with load cells, or dosage programmers with digital or computerized
Weight 150 kg 280 kg 450 Kg 600 Kg 950 Kg 1200 Kg
display. The VM/MX mixers are compliant with the required international
Dimensions (mm) 1000 x 400 x 1150 1200 x 600 x 1250 1600 x 650 x 1650 1800 x 700 x 1700 2200 x 800 x 1450 1800 x 1000 x 1750
standards.
via xxv Aprile, 86 - 52048 Monte San Savino (AR - ITALY) w w w.v i o l i m a c c h i n e.i t
phone: +39 0575 810487 fax: +39 0575 815903
Violi srl reserves the right to make changes, at any moment and without notice,
e-mail: sales@violimacchine.it to the models, their accessories and options, to the prices and conditions of sale