Three 110kV cable circuits connecting Hawiyah substation to other substations and switching stations will undergo pre-commissioning electrical tests over four days. Day one will include sheath testing, phase and capacitance checks, and resistance measurements. Day two consists of cross-bonding, surge voltage limit, and earth resistance tests. Day four is the high voltage test with preparations including cable access and bushing installation at the gas insulated switchgear on both ends of the circuits.
Three 110kV cable circuits connecting Hawiyah substation to other substations and switching stations will undergo pre-commissioning electrical tests over four days. Day one will include sheath testing, phase and capacitance checks, and resistance measurements. Day two consists of cross-bonding, surge voltage limit, and earth resistance tests. Day four is the high voltage test with preparations including cable access and bushing installation at the gas insulated switchgear on both ends of the circuits.
Three 110kV cable circuits connecting Hawiyah substation to other substations and switching stations will undergo pre-commissioning electrical tests over four days. Day one will include sheath testing, phase and capacitance checks, and resistance measurements. Day two consists of cross-bonding, surge voltage limit, and earth resistance tests. Day four is the high voltage test with preparations including cable access and bushing installation at the gas insulated switchgear on both ends of the circuits.
Three 110kV cable circuits connecting Hawiyah substation to other substations and switching stations will undergo pre-commissioning electrical tests over four days. Day one will include sheath testing, phase and capacitance checks, and resistance measurements. Day two consists of cross-bonding, surge voltage limit, and earth resistance tests. Day four is the high voltage test with preparations including cable access and bushing installation at the gas insulated switchgear on both ends of the circuits.