Sebastian is a welder who must properly wear his uniform of a blue overall, orange safety gloves, black welding mask, brown safety boots, yellow hard hat, and red ear protectors. He must also organize the tools on the tool board in a specific way, such as placing the screwdriver next to the hammer, wrench next to the screwdriver, and nails with a nut between them next to the hammer. It was a successful day and Sebastian was happy with his work.
Sebastian is a welder who must properly wear his uniform of a blue overall, orange safety gloves, black welding mask, brown safety boots, yellow hard hat, and red ear protectors. He must also organize the tools on the tool board in a specific way, such as placing the screwdriver next to the hammer, wrench next to the screwdriver, and nails with a nut between them next to the hammer. It was a successful day and Sebastian was happy with his work.
Sebastian is a welder who must properly wear his uniform of a blue overall, orange safety gloves, black welding mask, brown safety boots, yellow hard hat, and red ear protectors. He must also organize the tools on the tool board in a specific way, such as placing the screwdriver next to the hammer, wrench next to the screwdriver, and nails with a nut between them next to the hammer. It was a successful day and Sebastian was happy with his work.
Name: Cristian david florez rodriguez date: OCTOBER 22 OF 2015 ficha: 957785
Read color and draw.
A DAY IN THE WORKSHOP Sebastian is a welder; he is working in a workshop. Sebastian has to do many things to get a successful job. For example, he has to wear the uniform properly; he has to wear a blue overall, orange safety gloves, a black holding mask, brown safety boots, a yellow hard cap and red ear protectors. Sebastian has also a routine. Today he has to organize the tools on the tool board. He has to put the screw driver next to the hammer; (on the left) the wrench has to be next to the screw driver, on the right of the hammer he has to put some nails, he has to put a nut between the nails and the hammer, the pliers have to be below the hammer. He has to put the hacksaw next to the pliers, on the right. He has to keep the drill in the toolbox and the jack behind it; some screws and washers have to be on the floor in front of the toolbox. A try square has to be behind the tool board and finally he has to put the c-clamp, and the bolt cutter next to the saw blade. It is a successful day and Sebastian is very happy to work there.