Riadh's Curriculum Vitae: Personal Information

You might also like

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 318

Riadhs Curriculum Vitae

Personal Information:
Name:- Riadh Noaman Mohammed Haider
Date and Place of birth: Yemen, Taiz, 1/1/1986

Nationality: Yemeni
Marital status: Married
Objective: To be one of the best high-level Professionals in my chosen career.
Mobile Number: +967-777679965 OR +967-771839176
E-mail address: Riadh_noaman@yahoo.com OR Riadhnoaman@gmail.com
Address: Sanaa- Sawan

Qualificationmmvsdvknknknsvnvkdnvknvdnvndvndnkdnkk k kk
knknknknk
Qualificationmmvsdvknknknsvnvkdnvknvdnvndvndnkdnkk k kk
knknknknk

Qualificationmmvsdvknknknsvnvkdnvknvdnvndvndnkdnkk k kk
knknknknk: Riadhs Curriculum Vitae
Personal Information:

Name:- Riadh Noaman Mohammed Haider


Date and Place of birth: Yemen, Taiz, 1/1/1986
Nationality: Yemeni
Marital status: Married
Objective: To be one of the best high-level Professionals in my chosen career.
Mobile Number: +967-777679965 OR +967-771839176
E-mail address: Riadh_noaman@yahoo.com OR Riadhnoaman@gmail.com
Address: Sanaa- Sawan

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)

[2012]

Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound Outstandgfd hgdfh dfh df fgh dfghdfhdfhng knowledge of applicable design for Instrument and
Control designs
nowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowMoved from Technical Role to Marketing to get more experience and interact with
more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumMoved from Technical Role to Marketing to get more experience and interact
with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,

Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.

10

Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

11

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

12

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

13

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energentation engineer for most electrical and instrumentation equipment.
Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

14

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energledgment in electrical and instrumentation engineering (Pressure Control
Valves , Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp.
Transmitters, Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate
Flow-meter, Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energ
I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

15

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
1)
Principals of pressure control valves engineering, types and construction.
2) Sizing of pressure controls valves.
3) Principals of positioners, actuators, its types, construction, and sizing.
4) Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and

16

ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

17

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration

18

Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
5)
Principals of pressure control valves engineering, types and construction.
6) Sizing of pressure controls valves.
7) Principals of positioners, actuators, its types, construction, and sizing.
8) Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.

19

Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

20

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration

21

Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
9)
Principals of pressure control valves engineering, types and construction.
10) Sizing of pressure controls valves.
11) Principals of positioners, actuators, its types, construction, and sizing.
12) Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.

22

Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

23

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.

24

[2009]

Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)


[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


[ 08/08/2008 To
27/08/2008]
Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

[2009]

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]

[ 08/08/2008 To

ure and Temp. Transmitters, Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter,
Orifice Plate Flow-meter, Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support fRiadhs Curriculum Vitae

Personal Information:
Name:- Riadh Noaman Mohammed Haider
Date and Place of birth: Yemen, Taiz, 1/1/1986
Nationality: Yemeni
Marital status: Married

25

Objective: To be one of the best high-level Professionals in my chosen career.


Mobile Number: +967-777679965 OR +967-771839176
E-mail address: Riadh_noaman@yahoo.com OR Riadhnoaman@gmail.com
Address: Sanaa- Sawan

Qualification: Riadhs Curriculum Vitae


Personal Information:
Name:- Riadh Noaman Mohammed Haider
Date and Place of birth: Yemen, Taiz, 1/1/1986

Nationality: Yemeni
Marital status: Married
Objective: To be one of the best high-level Professionals in my chosen career.
Mobile Number: +967-777679965 OR +967-771839176
E-mail address: Riadh_noaman@yahoo.com OR Riadhnoaman@gmail.com
Address: Sanaa- Sawan

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

[2012]

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound Outstandgfd hgdfh dfh df fgh dfghdfhdfhng knowledge of applicable design for Instrument and
Control designs
nowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

26

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

27

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowMoved from Technical Role to Marketing to get more experience and interact with
more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,

28

Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.

29

Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

30

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumMoved from Technical Role to Marketing to get more experience and interact
with more people to make participate and exhibits the product through the market.

31

Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

32

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

33

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

34

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).

35

Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

36

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

37

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

38

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energentation engineer for most electrical and instrumentation equipment.
Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energledgment in electrical and instrumentation engineering (Pressure Control
Valves , Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp.
Transmitters, Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate
Flow-meter, Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energ
I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


39

Graduation Project under title WIMAX


Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
13)
Principals of pressure control valves engineering, types and construction.
14) Sizing of pressure controls valves.
15) Principals of positioners, actuators, its types, construction, and sizing.
16) Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

40

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

41

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


42

Graduation Project under title WIMAX


Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
17)
Principals of pressure control valves engineering, types and construction.
18) Sizing of pressure controls valves.
19) Principals of positioners, actuators, its types, construction, and sizing.
20) Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]

43

General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

44

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


45

Graduation Project under title WIMAX


Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
21)
Principals of pressure control valves engineering, types and construction.
22) Sizing of pressure controls valves.
23) Principals of positioners, actuators, its types, construction, and sizing.
24) Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]

46

General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

47

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


48

Graduation Project under title WIMAX


Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

[2009]

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


[ 08/08/2008 To
27/08/2008]
Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

49

[2009]

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]

[ 08/08/2008 To

ure and Temp. Transmitters, Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter,
Orifice Plate Flow-meter, Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,

50

Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.

51

Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

52

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energentation engineer for most electrical and instrumentation equipment.
Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energledgment in electrical and instrumentation engineering (Pressure Control
Valves , Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp.
Transmitters, Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate
Flow-meter, Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energ
I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

53

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
25)
Principals of pressure control valves engineering, types and construction.
26) Sizing of pressure controls valves.
27) Principals of positioners, actuators, its types, construction, and sizing.
28) Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]

54

Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND

55

CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)


Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).

Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

56

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
29)
Principals of pressure control valves engineering, types and construction.
30) Sizing of pressure controls valves.
31) Principals of positioners, actuators, its types, construction, and sizing.
32) Principal of pressure regulators, and regulators sizing.
Programmable Logic Controllers and (PLCs) and SCADA Systems course,
[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa PREPARING THE TECHNICAL AND COMMERCIAL OFFERS FOR THE
CLIENTS WITH SPECIFIC SPECIFICATIONS.
Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

57

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors Follow up the tenders technically and commercially
for all explorations and production companies in Yemen (Total, SAFER, OMV, OXY, Dove EnergMoved from
Technical Role to Marketing to get more experience and interact with more people to make participate and
exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

58

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production cFollow up the tenders
technically and commercially for all explorations and production companies in Yemen (Total, SAFER, OMV,
OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and interact with more
people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

59

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safetFollow up the tenders technically and commercially for all
explorations and production companies in Yemen (Total, SAFER, OMV, OXY, Dove EnergMoved from
Technical Role to Marketing to get more experience and interact with more people to make participate and
exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

60

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production cFollow up the tenders
technically and commercially for all explorations and production companies in Yemen (Total, SAFER, OMV,
OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and interact with more
people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

61

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

62

Follow up the tenders technically and commercially for all explorations and production cFollow up the tenders
technically and commercially for all explorations and production companies in Yemen (Total, SAFER, OMV,
OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and interact with more
people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders teFollow up the tenders technically and commercially for all explorations and production
companies in Yemen (Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get
more experience and interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).

63

Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production cFollow up the tenders
technically and commercially for all explorations and production companies in Yemen (Total, SAFER, OMV,
OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and interact with more
people to make participate and exhibits the product through the market.

64

Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OFollow up the tenders technically and commercially for all explorations and production
companies in Yemen (Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get
more experience and interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations

65

Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production cFollow up the tenders
technically and commercially for all explorations and production companies in Yemen (Total, SAFER, OMV,
OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and interact with more
people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

66

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

67

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production cFollow up the tenders
technically and commercially for all explorations and production companies in Yemen (Total, SAFER, OMV,
OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and interact with more
people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen (

68

Seals ,Gaskets ,Instrumentations Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors,
Generators ,Transformers, UPS, Electrical and Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energentation engineer for most electrical and instrumentation equipment.
Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energledgment in electrical and instrumentation engineering (Pressure Control
Valves , Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp.
Transmitters, Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate
Flow-meter, Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energ
I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm

69

CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
33)
Principals of pressure control valves engineering, types and construction.
34) Sizing of pressure controls valves.
35) Principals of positioners, actuators, its types, construction, and sizing.
36) Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]

70

Course Project about Neural Network by using MATLAB.


[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
71

Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm

72

CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
37)
Principals of pressure control valves engineering, types and construction.
38) Sizing of pressure controls valves.
39) Principals of positioners, actuators, its types, construction, and sizing.
40) Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]

73

Course Project about Neural Network by using MATLAB.


[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND

74

CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)


Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).

Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

75

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
41)
Principals of pressure control valves engineering, types and construction.
42) Sizing of pressure controls valves.
43) Principals of positioners, actuators, its types, construction, and sizing.
44) Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]

76

Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)

77

[2012]

Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

78

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

[2009]

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


[ 08/08/2008 To
27/08/2008]
Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]

79

[ 08/08/2008 To

[2009]

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

[2009]

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]

[ 08/08/2008 To

Riadhs Curriculum Vitae


Personal Information:
Name:- Riadh Noaman Mohammed Haider
Date and Place of birth: Yemen, Taiz, 1/1/1986

Nationality: Yemeni
Marital status: Married
Objective: To be one of the best high-level Professionals in my chosen career.
Mobile Number: +967-777679965 OR +967-771839176
E-mail address: Riadh_noaman@yahoo.com OR Riadhnoaman@gmail.com
Address: Sanaa- Sawan

Qualificationmmvsdvknknknsvnvkdnvknvdnvndvndnkdnkk k kk
knknknknk
Qualificationmmvsdvknknknsvnvkdnvknvdnvndvndnkdnkk k kk
knknknknk

Qualificationmmvsdvknknknsvnvkdnvknvdnvndvndnkdnkk k kk
knknknknk: Riadhs Curriculum Vitae
Personal Information:

Name:- Riadh Noaman Mohammed Haider


Date and Place of birth: Yemen, Taiz, 1/1/1986
Nationality: Yemeni
Marital status: Married

80

Objective: To be one of the best high-level Professionals in my chosen career.


Mobile Number: +967-777679965 OR +967-771839176
E-mail address: Riadh_noaman@yahoo.com OR Riadhnoaman@gmail.com
Address: Sanaa- Sawan

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

[2012]

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound Outstandgfd hgdfh dfh df fgh dfghdfhdfhng knowledge of applicable design for Instrument and
Control designs
nowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

81

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

82

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowMoved from Technical Role to Marketing to get more experience and interact with
more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

83

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

84

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

85

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumMoved from Technical Role to Marketing to get more experience and interact
with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations

86

Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

87

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

88

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,

89

Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.

90

Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

91

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

92

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

93

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energentation engineer for most electrical and instrumentation equipment.
Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energledgment in electrical and instrumentation engineering (Pressure Control
Valves , Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp.
Transmitters, Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate
Flow-meter, Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energ
I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:

94

[ 08/08/2008 To

Digital Switching Systems


Microwave System

Ground Station
Optical System

Traffic

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,

[2011]
(Fisher Emerson processes Management):
45)
Principals of pressure control valves engineering, types and construction.
46) Sizing of pressure controls valves.
47) Principals of positioners, actuators, its types, construction, and sizing.
48) Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

95

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

96

[2012]

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:

97

[ 08/08/2008 To

Digital Switching Systems


Microwave System

Ground Station
Optical System

Traffic

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,

[2011]
(Fisher Emerson processes Management):
49)
Principals of pressure control valves engineering, types and construction.
50) Sizing of pressure controls valves.
51) Principals of positioners, actuators, its types, construction, and sizing.
52) Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

98

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

99

[2012]

Outstanding knowledge of applicable design for Instrument and Control designs

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic

100

[ 08/08/2008 To

Microwave System

Optical System

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,

[2011]
(Fisher Emerson processes Management):
53)
Principals of pressure control valves engineering, types and construction.
54) Sizing of pressure controls valves.
55) Principals of positioners, actuators, its types, construction, and sizing.
56) Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:


101

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

102

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

103

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

[2009]

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


[ 08/08/2008 To
27/08/2008]
Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

[2009]

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]

[ 08/08/2008 To

ure and Temp. Transmitters, Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter,
Orifice Plate Flow-meter, Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations

104

Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .
Provide engineering support fRiadhs Curriculum Vitae

Personal Information:
Name:- Riadh Noaman Mohammed Haider
Date and Place of birth: Yemen, Taiz, 1/1/1986

Nationality: Yemeni
Marital status: Married
Objective: To be one of the best high-level Professionals in my chosen career.
Mobile Number: +967-777679965 OR +967-771839176
E-mail address: Riadh_noaman@yahoo.com OR Riadhnoaman@gmail.com
Address: Sanaa- Sawan

Qualification: Riadhs Curriculum Vitae


Personal Information:
Name:- Riadh Noaman Mohammed Haider
Date and Place of birth: Yemen, Taiz, 1/1/1986

Nationality: Yemeni
Marital status: Married
Objective: To be one of the best high-level Professionals in my chosen career.
Mobile Number: +967-777679965 OR +967-771839176
E-mail address: Riadh_noaman@yahoo.com OR Riadhnoaman@gmail.com
Address: Sanaa- Sawan

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

[2012]

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound Outstandgfd hgdfh dfh df fgh dfghdfhdfhng knowledge of applicable design for Instrument and
Control designs
nowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

105

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.

Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations

106

Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowMoved from Technical Role to Marketing to get more experience and interact with
more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

107

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,

108

Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.

109

Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

110

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumMoved from Technical Role to Marketing to get more experience and interact
with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.

111

Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

112

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

113

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

114

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).

115

Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

116

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

117

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energentation engineer for most electrical and instrumentation equipment.
Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energledgment in electrical and instrumentation engineering (Pressure Control
Valves , Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp.
Transmitters, Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate
Flow-meter, Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energ

118

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,

[2011]
(Fisher Emerson processes Management):
57)
Principals of pressure control valves engineering, types and construction.
58) Sizing of pressure controls valves.
59) Principals of positioners, actuators, its types, construction, and sizing.
60) Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]

119

English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.

120

Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

121

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
61)
Principals of pressure control valves engineering, types and construction.
62) Sizing of pressure controls valves.
63) Principals of positioners, actuators, its types, construction, and sizing.
64) Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]

122

English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.

123

Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

124

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,

[2011]
(Fisher Emerson processes Management):
65)
Principals of pressure control valves engineering, types and construction.
66) Sizing of pressure controls valves.
67) Principals of positioners, actuators, its types, construction, and sizing.
68) Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]

125

English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.

126

Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

127

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


[ 08/08/2008 To
27/08/2008]
Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).

128

[2009]

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

[2009]

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]

[ 08/08/2008 To

ure and Temp. Transmitters, Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter,
Orifice Plate Flow-meter, Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

129

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).

130

Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

131

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energentation engineer for most electrical and instrumentation equipment.
Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energledgment in electrical and instrumentation engineering (Pressure Control
Valves , Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp.
Transmitters, Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate
Flow-meter, Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energ
I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

132

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
69)
Principals of pressure control valves engineering, types and construction.
70) Sizing of pressure controls valves.
71) Principals of positioners, actuators, its types, construction, and sizing.
72) Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]

133

English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)

134

TEL.NO: +967-777342609

E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

135

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,

[2011]
(Fisher Emerson processes Management):
73)
Principals of pressure control valves engineering, types and construction.
74) Sizing of pressure controls valves.
75) Principals of positioners, actuators, its types, construction, and sizing.
76) Principal of pressure regulators, and regulators sizing.
Programmable Logic Controllers and (PLCs) and SCADA Systems course,
[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa PREPARING THE TECHNICAL AND COMMERCIAL OFFERS FOR THE
CLIENTS WITH SPECIFIC SPECIFICATIONS.
Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.

136

Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors Follow up the tenders technically and commercially
for all explorations and production companies in Yemen (Total, SAFER, OMV, OXY, Dove EnergMoved from

137

Technical Role to Marketing to get more experience and interact with more people to make participate and
exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations

138

Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production cFollow up the tenders
technically and commercially for all explorations and production companies in Yemen (Total, SAFER, OMV,
OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and interact with more
people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safetFollow up the tenders technically and commercially for all
explorations and production companies in Yemen (Total, SAFER, OMV, OXY, Dove EnergMoved from

139

Technical Role to Marketing to get more experience and interact with more people to make participate and
exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations

140

Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production cFollow up the tenders
technically and commercially for all explorations and production companies in Yemen (Total, SAFER, OMV,
OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and interact with more
people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

141

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production cFollow up the tenders
technically and commercially for all explorations and production companies in Yemen (Total, SAFER, OMV,
OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and interact with more
people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

142

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders teFollow up the tenders technically and commercially for all explorations and production
companies in Yemen (Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get
more experience and interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

143

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production cFollow up the tenders
technically and commercially for all explorations and production companies in Yemen (Total, SAFER, OMV,
OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and interact with more
people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

144

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OFollow up the tenders technically and commercially for all explorations and production
companies in Yemen (Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get
more experience and interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).

145

Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production cFollow up the tenders
technically and commercially for all explorations and production companies in Yemen (Total, SAFER, OMV,
OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and interact with more
people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.

146

Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production cFollow up the tenders
technically and commercially for all explorations and production companies in Yemen (Total, SAFER, OMV,
OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and interact with more
people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations

147

Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen (

Seals ,Gaskets ,Instrumentations Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors,
Generators ,Transformers, UPS, Electrical and Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energentation engineer for most electrical and instrumentation equipment.
Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energledgment in electrical and instrumentation engineering (Pressure Control
Valves , Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp.
Transmitters, Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate
Flow-meter, Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energ
I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

148

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
77)
Principals of pressure control valves engineering, types and construction.
78) Sizing of pressure controls valves.
79) Principals of positioners, actuators, its types, construction, and sizing.
80) Principal of pressure regulators, and regulators sizing.
Programmable Logic Controllers and (PLCs) and SCADA Systems course,
[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]

149

Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
150

Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

151

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
81)
Principals of pressure control valves engineering, types and construction.
82) Sizing of pressure controls valves.
83) Principals of positioners, actuators, its types, construction, and sizing.
84) Principal of pressure regulators, and regulators sizing.
Programmable Logic Controllers and (PLCs) and SCADA Systems course,
[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]

152

Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
153

Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

154

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
85)
Principals of pressure control valves engineering, types and construction.
86) Sizing of pressure controls valves.
87) Principals of positioners, actuators, its types, construction, and sizing.
88) Principal of pressure regulators, and regulators sizing.
Programmable Logic Controllers and (PLCs) and SCADA Systems course,
[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]

155

Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
156

Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

157

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


[ 08/08/2008 To
27/08/2008]
Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).

Training During University Study:


158

[2009]

Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

[2009]

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]

[ 08/08/2008 To

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

[2009]

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]

[ 08/08/2008 To

Riadhs Curriculum Vitae


Personal Information:
Name:- Riadh Noaman Mohammed Haider
Date and Place of birth: Yemen, Taiz, 1/1/1986

Nationality: Yemeni
Marital status: Married
Objective: To be one of the best high-level Professionals in my chosen career.
Mobile Number: +967-777679965 OR +967-771839176
E-mail address: Riadh_noaman@yahoo.com OR Riadhnoaman@gmail.com
Address: Sanaa- Sawan

Qualificationmmvsdvknknknsvnvkdnvknvdnvndvndnkdnkk k kk
knknknknk
159

Qualificationmmvsdvknknknsvnvkdnvknvdnvndvndnkdnkk k kk
knknknknk

Qualificationmmvsdvknknknsvnvkdnvknvdnvndvndnkdnkk k kk
knknknknk: Riadhs Curriculum Vitae
Personal Information:

Name:- Riadh Noaman Mohammed Haider


Date and Place of birth: Yemen, Taiz, 1/1/1986
Nationality: Yemeni
Marital status: Married
Objective: To be one of the best high-level Professionals in my chosen career.
Mobile Number: +967-777679965 OR +967-771839176
E-mail address: Riadh_noaman@yahoo.com OR Riadhnoaman@gmail.com
Address: Sanaa- Sawan

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

[2012]

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound Outstandgfd hgdfh dfh df fgh dfghdfhdfhng knowledge of applicable design for Instrument and
Control designs
nowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).

160

Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

161

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowMoved from Technical Role to Marketing to get more experience and interact with
more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

162

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

163

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,

164

Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.

165

Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumMoved from Technical Role to Marketing to get more experience and interact
with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,

166

Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.

167

Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

168

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

169

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

170

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).

171

Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

172

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energentation engineer for most electrical and instrumentation equipment.
Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energledgment in electrical and instrumentation engineering (Pressure Control
Valves , Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp.
Transmitters, Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate
Flow-meter, Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energ
I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

173

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
89)
Principals of pressure control valves engineering, types and construction.
90) Sizing of pressure controls valves.
91) Principals of positioners, actuators, its types, construction, and sizing.
92) Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]

174

English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)

175

TEL.NO: +967-777342609

E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

176

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,

[2011]
(Fisher Emerson processes Management):
93)
Principals of pressure control valves engineering, types and construction.
94) Sizing of pressure controls valves.
95) Principals of positioners, actuators, its types, construction, and sizing.
96) Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]

177

English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)

178

TEL.NO: +967-777342609

E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

179

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
97)
Principals of pressure control valves engineering, types and construction.
98) Sizing of pressure controls valves.
99) Principals of positioners, actuators, its types, construction, and sizing.
100)
Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]

180

English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)

181

TEL.NO: +967-777342609

E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

182

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

[2009]

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


[ 08/08/2008 To
27/08/2008]
Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm

183

[2009]

CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]

[ 08/08/2008 To

ure and Temp. Transmitters, Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter,
Orifice Plate Flow-meter, Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support fRiadhs Curriculum Vitae

Personal Information:
Name:- Riadh Noaman Mohammed Haider
Date and Place of birth: Yemen, Taiz, 1/1/1986

Nationality: Yemeni
Marital status: Married
Objective: To be one of the best high-level Professionals in my chosen career.
Mobile Number: +967-777679965 OR +967-771839176
E-mail address: Riadh_noaman@yahoo.com OR Riadhnoaman@gmail.com
Address: Sanaa- Sawan

Qualification: Riadhs Curriculum Vitae


Personal Information:
Name:- Riadh Noaman Mohammed Haider
Date and Place of birth: Yemen, Taiz, 1/1/1986

Nationality: Yemeni
Marital status: Married
Objective: To be one of the best high-level Professionals in my chosen career.
Mobile Number: +967-777679965 OR +967-771839176
E-mail address: Riadh_noaman@yahoo.com OR Riadhnoaman@gmail.com
Address: Sanaa- Sawan

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND

184

CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)


Vivid Understanding of technical specifications.

[2012]

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound Outstandgfd hgdfh dfh df fgh dfghdfhdfhng knowledge of applicable design for Instrument and
Control designs
nowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

185

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowMoved from Technical Role to Marketing to get more experience and interact with
more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

186

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

187

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

188

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

189

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumMoved from Technical Role to Marketing to get more experience and interact
with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

190

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

191

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,

192

Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.

193

Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

194

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

195

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

196

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energentation engineer for most electrical and instrumentation equipment.
Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

197

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energledgment in electrical and instrumentation engineering (Pressure Control
Valves , Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp.
Transmitters, Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate
Flow-meter, Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energ
I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

198

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
101) Principals of pressure control valves engineering, types and construction.
102)
Sizing of pressure controls valves.
103)
Principals of positioners, actuators, its types, construction, and sizing.
104)
Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and

199

ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

200

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration

201

Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
105) Principals of pressure control valves engineering, types and construction.
106)
Sizing of pressure controls valves.
107)
Principals of positioners, actuators, its types, construction, and sizing.
108)
Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.

202

Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

203

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration

204

Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
109) Principals of pressure control valves engineering, types and construction.
110)
Sizing of pressure controls valves.
111)
Principals of positioners, actuators, its types, construction, and sizing.
112)
Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.

205

Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

206

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.

207

[2009]

Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)


[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


[ 08/08/2008 To
27/08/2008]
Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

[2009]

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]

[ 08/08/2008 To

ure and Temp. Transmitters, Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter,
Orifice Plate Flow-meter, Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

208

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

209

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

210

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energentation engineer for most electrical and instrumentation equipment.
Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energledgment in electrical and instrumentation engineering (Pressure Control
Valves , Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp.
Transmitters, Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate
Flow-meter, Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations

211

Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energ
I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
113) Principals of pressure control valves engineering, types and construction.

212

114)
115)
116)

Sizing of pressure controls valves.


Principals of positioners, actuators, its types, construction, and sizing.
Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

213

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

214

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
117) Principals of pressure control valves engineering, types and construction.

215

118)
119)
120)

Sizing of pressure controls valves.


Principals of positioners, actuators, its types, construction, and sizing.
Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa PREPARING THE TECHNICAL AND COMMERCIAL OFFERS FOR THE
CLIENTS WITH SPECIFIC SPECIFICATIONS.
Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

216

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors Follow up the tenders technically and commercially
for all explorations and production companies in Yemen (Total, SAFER, OMV, OXY, Dove EnergMoved from
Technical Role to Marketing to get more experience and interact with more people to make participate and
exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

217

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production cFollow up the tenders
technically and commercially for all explorations and production companies in Yemen (Total, SAFER, OMV,
OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and interact with more
people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,

218

Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safetFollow up the tenders technically and commercially for all
explorations and production companies in Yemen (Total, SAFER, OMV, OXY, Dove EnergMoved from
Technical Role to Marketing to get more experience and interact with more people to make participate and
exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

219

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production cFollow up the tenders
technically and commercially for all explorations and production companies in Yemen (Total, SAFER, OMV,
OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and interact with more
people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,

220

Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production cFollow up the tenders
technically and commercially for all explorations and production companies in Yemen (Total, SAFER, OMV,
OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and interact with more
people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

221

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders teFollow up the tenders technically and commercially for all explorations and production
companies in Yemen (Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get
more experience and interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).

222

Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production cFollow up the tenders
technically and commercially for all explorations and production companies in Yemen (Total, SAFER, OMV,
OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and interact with more
people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.

223

Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OFollow up the tenders technically and commercially for all explorations and production
companies in Yemen (Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get
more experience and interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations

224

Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production cFollow up the tenders
technically and commercially for all explorations and production companies in Yemen (Total, SAFER, OMV,
OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and interact with more
people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

225

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production cFollow up the tenders
technically and commercially for all explorations and production companies in Yemen (Total, SAFER, OMV,
OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and interact with more
people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

226

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen (

Seals ,Gaskets ,Instrumentations Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors,
Generators ,Transformers, UPS, Electrical and Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energentation engineer for most electrical and instrumentation equipment.
Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

227

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energledgment in electrical and instrumentation engineering (Pressure Control
Valves , Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp.
Transmitters, Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate
Flow-meter, Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energ
I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

228

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
121) Principals of pressure control valves engineering, types and construction.
122)
Sizing of pressure controls valves.
123)
Principals of positioners, actuators, its types, construction, and sizing.
124)
Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and

229

ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

230

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration

231

Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
125) Principals of pressure control valves engineering, types and construction.
126)
Sizing of pressure controls valves.
127)
Principals of positioners, actuators, its types, construction, and sizing.
128)
Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.

232

Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

233

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration

234

Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
129) Principals of pressure control valves engineering, types and construction.
130)
Sizing of pressure controls valves.
131)
Principals of positioners, actuators, its types, construction, and sizing.
132)
Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.

235

Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

236

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.

237

[2009]

Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)


[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


[ 08/08/2008 To
27/08/2008]
Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

[2009]

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]

[ 08/08/2008 To

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]

Riadhs Curriculum Vitae


238

[ 08/08/2008 To

[2009]

Personal Information:
Name:- Riadh Noaman Mohammed Haider
Date and Place of birth: Yemen, Taiz, 1/1/1986

Nationality: Yemeni
Marital status: Married
Objective: To be one of the best high-level Professionals in my chosen career.
Mobile Number: +967-777679965 OR +967-771839176
E-mail address: Riadh_noaman@yahoo.com OR Riadhnoaman@gmail.com
Address: Sanaa- Sawan

Qualificationmmvsdvknknknsvnvkdnvknvdnvndvndnkdnkk k kk
knknknknk
Qualificationmmvsdvknknknsvnvkdnvknvdnvndvndnkdnkk k kk
knknknknk

Qualificationmmvsdvknknknsvnvkdnvknvdnvndvndnkdnkk k kk
knknknknk: Riadhs Curriculum Vitae
Personal Information:

Name:- Riadh Noaman Mohammed Haider


Date and Place of birth: Yemen, Taiz, 1/1/1986
Nationality: Yemeni
Marital status: Married
Objective: To be one of the best high-level Professionals in my chosen career.
Mobile Number: +967-777679965 OR +967-771839176
E-mail address: Riadh_noaman@yahoo.com OR Riadhnoaman@gmail.com
Address: Sanaa- Sawan

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

239

[2012]

Profound Outstandgfd hgdfh dfh df fgh dfghdfhdfhng knowledge of applicable design for Instrument and
Control designs
nowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

240

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowMoved from Technical Role to Marketing to get more experience and interact with
more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

241

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

242

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,

243

Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.

244

Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumMoved from Technical Role to Marketing to get more experience and interact
with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,

245

Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.

246

Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

247

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

248

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

249

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).

250

Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

251

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energentation engineer for most electrical and instrumentation equipment.
Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energledgment in electrical and instrumentation engineering (Pressure Control
Valves , Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp.

252

Transmitters, Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate
Flow-meter, Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energ
I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:
253

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
133) Principals of pressure control valves engineering, types and construction.
134)
Sizing of pressure controls valves.
135)
Principals of positioners, actuators, its types, construction, and sizing.
136)
Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.

254

Ability to learn more and develop my knowledge.


Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).

255

Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:
256

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
137) Principals of pressure control valves engineering, types and construction.
138)
Sizing of pressure controls valves.
139)
Principals of positioners, actuators, its types, construction, and sizing.
140)
Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.

257

Ability to learn more and develop my knowledge.


Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).

258

Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:
259

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
141) Principals of pressure control valves engineering, types and construction.
142)
Sizing of pressure controls valves.
143)
Principals of positioners, actuators, its types, construction, and sizing.
144)
Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.

260

Ability to learn more and develop my knowledge.


Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).

261

Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm

262

[2009]

CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


[ 08/08/2008 To
27/08/2008]
Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

[2009]

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]

[ 08/08/2008 To

ure and Temp. Transmitters, Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter,
Orifice Plate Flow-meter, Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support fRiadhs Curriculum Vitae

Personal Information:
Name:- Riadh Noaman Mohammed Haider
Date and Place of birth: Yemen, Taiz, 1/1/1986

Nationality: Yemeni
Marital status: Married
Objective: To be one of the best high-level Professionals in my chosen career.
Mobile Number: +967-777679965 OR +967-771839176
E-mail address: Riadh_noaman@yahoo.com OR Riadhnoaman@gmail.com
Address: Sanaa- Sawan

263

Qualification: Riadhs Curriculum Vitae


Personal Information:
Name:- Riadh Noaman Mohammed Haider
Date and Place of birth: Yemen, Taiz, 1/1/1986

Nationality: Yemeni
Marital status: Married
Objective: To be one of the best high-level Professionals in my chosen career.
Mobile Number: +967-777679965 OR +967-771839176
E-mail address: Riadh_noaman@yahoo.com OR Riadhnoaman@gmail.com
Address: Sanaa- Sawan

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

[2012]

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound Outstandgfd hgdfh dfh df fgh dfghdfhdfhng knowledge of applicable design for Instrument and
Control designs
nowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

264

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

265

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowMoved from Technical Role to Marketing to get more experience and interact with
more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).

266

Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

267

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

268

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumMoved from Technical Role to Marketing to get more experience and interact
with more people to make participate and exhibits the product through the market.

269

Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

270

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

271

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

272

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).

273

Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

274

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

275

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

276

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energentation engineer for most electrical and instrumentation equipment.
Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energledgment in electrical and instrumentation engineering (Pressure Control
Valves , Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp.
Transmitters, Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate
Flow-meter, Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energ
I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


277

Graduation Project under title WIMAX


Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
145) Principals of pressure control valves engineering, types and construction.
146)
Sizing of pressure controls valves.
147)
Principals of positioners, actuators, its types, construction, and sizing.
148)
Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

278

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

279

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


280

Graduation Project under title WIMAX


Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
149) Principals of pressure control valves engineering, types and construction.
150)
Sizing of pressure controls valves.
151)
Principals of positioners, actuators, its types, construction, and sizing.
152)
Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]

281

General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

282

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


283

Graduation Project under title WIMAX


Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
153) Principals of pressure control valves engineering, types and construction.
154)
Sizing of pressure controls valves.
155)
Principals of positioners, actuators, its types, construction, and sizing.
156)
Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]

284

General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

285

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


286

Graduation Project under title WIMAX


Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

[2009]

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


[ 08/08/2008 To
27/08/2008]
Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

287

[2009]

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]

[ 08/08/2008 To

ure and Temp. Transmitters, Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter,
Orifice Plate Flow-meter, Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,

288

Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.

289

Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

290

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energentation engineer for most electrical and instrumentation equipment.
Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energledgment in electrical and instrumentation engineering (Pressure Control
Valves , Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp.
Transmitters, Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate
Flow-meter, Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energ
I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

291

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
157) Principals of pressure control valves engineering, types and construction.
158)
Sizing of pressure controls valves.
159)
Principals of positioners, actuators, its types, construction, and sizing.
160)
Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]

292

Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND

293

CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)


Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).

Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

294

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
161) Principals of pressure control valves engineering, types and construction.
162)
Sizing of pressure controls valves.
163)
Principals of positioners, actuators, its types, construction, and sizing.
164)
Principal of pressure regulators, and regulators sizing.
Programmable Logic Controllers and (PLCs) and SCADA Systems course,
[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa PREPARING THE TECHNICAL AND COMMERCIAL OFFERS FOR THE
CLIENTS WITH SPECIFIC SPECIFICATIONS.
Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

295

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors Follow up the tenders technically and commercially
for all explorations and production companies in Yemen (Total, SAFER, OMV, OXY, Dove EnergMoved from
Technical Role to Marketing to get more experience and interact with more people to make participate and
exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

296

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production cFollow up the tenders
technically and commercially for all explorations and production companies in Yemen (Total, SAFER, OMV,
OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and interact with more
people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

297

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safetFollow up the tenders technically and commercially for all
explorations and production companies in Yemen (Total, SAFER, OMV, OXY, Dove EnergMoved from
Technical Role to Marketing to get more experience and interact with more people to make participate and
exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

298

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production cFollow up the tenders
technically and commercially for all explorations and production companies in Yemen (Total, SAFER, OMV,
OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and interact with more
people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

299

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

300

Follow up the tenders technically and commercially for all explorations and production cFollow up the tenders
technically and commercially for all explorations and production companies in Yemen (Total, SAFER, OMV,
OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and interact with more
people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders teFollow up the tenders technically and commercially for all explorations and production
companies in Yemen (Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get
more experience and interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).

301

Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production cFollow up the tenders
technically and commercially for all explorations and production companies in Yemen (Total, SAFER, OMV,
OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and interact with more
people to make participate and exhibits the product through the market.

302

Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OFollow up the tenders technically and commercially for all explorations and production
companies in Yemen (Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get
more experience and interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations

303

Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production cFollow up the tenders
technically and commercially for all explorations and production companies in Yemen (Total, SAFER, OMV,
OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and interact with more
people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

304

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

305

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production cFollow up the tenders
technically and commercially for all explorations and production companies in Yemen (Total, SAFER, OMV,
OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and interact with more
people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove EnergMoved from Technical Role to Marketing to get more experience and
interact with more people to make participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen (

306

Seals ,Gaskets ,Instrumentations Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors,
Generators ,Transformers, UPS, Electrical and Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energentation engineer for most electrical and instrumentation equipment.
Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energledgment in electrical and instrumentation engineering (Pressure Control
Valves , Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp.
Transmitters, Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate
Flow-meter, Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energ
I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm

307

CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
165) Principals of pressure control valves engineering, types and construction.
166)
Sizing of pressure controls valves.
167)
Principals of positioners, actuators, its types, construction, and sizing.
168)
Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]

308

Course Project about Neural Network by using MATLAB.


[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
309

Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm

310

CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
169) Principals of pressure control valves engineering, types and construction.
170)
Sizing of pressure controls valves.
171)
Principals of positioners, actuators, its types, construction, and sizing.
172)
Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]

311

Course Project about Neural Network by using MATLAB.


[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND

312

CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)


Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).

Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

313

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:

Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
173) Principals of pressure control valves engineering, types and construction.
174)
Sizing of pressure controls valves.
175)
Principals of positioners, actuators, its types, construction, and sizing.
176)
Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]

314

Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:

Excellent skill in both computer software & hardware maintenance.


Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:

Arabic: Mother tongue.


English: Very Good (reading, writing &listening) & Good speaking

Hobbies:

Reading
Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)

315

[2012]

Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .

Provide engineering support for procurement activities for instrumentation and control systems

Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX
Physical layer with MIMO Simulation using MATLAB.
[2009]
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

316

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

[2009]

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


[ 08/08/2008 To
27/08/2008]
Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]

317

[ 08/08/2008 To

[2009]

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]

318

[ 08/08/2008 To

[2009]

You might also like